Otter Valley Railroad Model Trains - Tillsonburg, Ontario Canada :: Glue :: Bob Smith Industries Finish Cure 20 Minute Epoxy 4.5oz

Bob Smith Industries Finish Cure 20 Minute Epoxy 4.5oz

Bob Smith Industries Finish Cure 20 Minute Epoxy 4.5oz
Bob Smith Industries Finish Cure 20 Minute Epoxy 4.5oz

FINISH-CURE 20 minute epoxy is an excellent, low odor substitute for polyester resins.

It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings.

For best results, FINISH-CURE should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight sparkling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE is best mixed in a disposable cup.

cures in 8 hours
Details
SKU BSI-209
Quantity in stock 2 item(s) available
Price: CA$17.99
Quantity
Add to wish list
 

Send to friend

 
: *
: *
: *
 
 

Customer feedback

 
Customer Reviews
There have been no reviews for this product.
Add your review here
Product rating: *
Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):