Bowser 42945 - HO 70 Ton 13 Panel 3-Bay Hopper Car - Pennsylvania (H37B w/ Crown Trucks) #272213
HO 70 Ton 13 Panel 3-Bay Hopper Car - Pennsylvania (H37B w/ Crown Trucks) #272213
| Price: | CA$29.99 |
Rapido 528025 - N Scale Horizon Fleet Dinette - Amtrak Phase III Wide #53504
N Scale Horizon Fleet Dinette - Amtrak Phase III Wide #53504
| Price: | CA$59.99 |
Athearn 63795 - HO RTR PS-2 2600 Covered Hopper - Grand Trunk Western (GTW) #111132
HO RTR PS-2 2600 Covered Hopper - Grand Trunk Western (GTW) #111132
| Price: | CA$51.99 |
Rapido 538028-3 - N Scale AutoFlood III RD Coal Hopper - UP/CMO #504337
N Scale AutoFlood III RD Coal Hopper - UP/CMO #504337
| Price: | CA$40.99 |
Walthers Mainline 1860 HO 50ft ACF Exterior Post Boxcar - Ready to Run -- Norfolk Southern #400007 (Boxcar Red)
HO 50ft ACF Exterior Post Boxcar - Ready to Run --Norfolk Southern
| Price: | CA$38.99 |
Evergreen Scale Models 189 Opaque White Polystyrene Strips 14in .125x.250 (5pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .125x.250 (5pcs pkg)
| Price: | CA$4.49 |
Rapido 601505 - HO Scale H1b Hudson Steam - DCC & Sound - Canadian Pacific (Delivery) #2816
HO Scale H1b Hudson Steam - DCC & Sound - Canadian Pacific (Delivery) #2816
| Price: | CA$634.99 |
Athearn 18791 - HO RTR PS 4740 Covered Hopper - Norfolk & Western #176854
HO RTR PS 4740 Covered Hopper - Norfolk & Western #176854
| Price: | CA$43.99 |
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 30FT 10m DCC colour Code -Brown
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 multi-stran 30FT 10m. - Brown
| Price: | CA$5.99 |
Bowser 24831 - HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4557
HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4557
| Price: | CA$202.99 |
Athearn Genesis G1206 - HO GE Dash 9-44CW - DC/DCC Ready - Canadian National CN #2510
HO GE Dash 9-44CW - DC/DCC Ready - Canadian National CN #2510
| Price: | CA$295.99 |
Evergreen Scale Models 3025 .025in Opaque White Polystyrene Passenger Car Siding (1sheet)
Evergreen Scale Models 3025 .025in Opaque White Polystyrene Passenger Car Siding (1sheet)
| Price: | CA$7.99 |
Rapido 139010-D HO Scale - Evans X72A Box car: APASCO - GE Leasing - Single Car #6112
Evans X72A Box car: APASCO - GE Leasing - Single Car #6112
| Price: | CA$53.99 |
Intermountain HO 4401014-02 14-Panel Coalporter, Canadian National #193012
HO Intermountain 4-Panel Coalporter, Canadian National
| Price: | CA$37.99 |
Tru Color Paint 090 - Acrylic - Vermont Red - 1oz
Tru Color Paint - Acrylic - Vermont Red - 1oz
| Price: | CA$7.99 |
Peco PSG-202 - 2mm Static Grass - Summer Grass (30g)
2mm Static Grass - Summer Grass (30g)
| Price: | CA$7.99 |
Rapido 181004-6 - HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Minneapolis & St. Louis (M&StL Red) #54992
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Minneapolis & St. Louis (M&StL Red) #54992
| Price: | CA$55.99 |
Micro Trains 98302239A - N Scale 100-Ton 3-Bay Ribside Open Hopper w/Tarps 4-Pack - (FOAM) - SOO Line
N Scale 100-Ton 3-Bay Ribside Open Hopper w/Tarps 4-Pack - (FOAM) - SOO Line
| Price: | CA$139.99 |
Rapido 150001-3 - HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286320
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286320
| Price: | CA$55.99 |
Rapido 543007-1 - N Scale Short Barrel Ore Hopper - Ontario Northland: Progressive Green #6524
N Scale Short Barrel Ore Hopper - Ontario Northland: Progressive Green #6524
| Price: | CA$41.99 |
Woodland Scenics 1374 - Ballast - Fine Light Gray - Shaker (57.7 in3)
Ballast - Fine Light Gray - Shaker (57.7 in3)
| Price: | CA$15.99 |
Kadee 2034 - HO Champion Brake Wheels - Red Oxide (8pcs)
HO Champion Brake Wheels - Red Oxide (8pcs)
| Price: | CA$4.50 |
Evergreen Scale Models 136 Opaque White Polystyrene Strips 14in .03x.125 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.125 (10pcs pkg)
| Price: | CA$4.49 |
Athearn 72594 - HO RTR 53Ft Jindo Container - UPSU (3pkg) #2
HO RTR 53Ft Jindo Container - UPSU (3pkg) #2
| Price: | CA$48.99 |
Otter Valley Railroad 6456- N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CWSX #140008
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CWSX #140008
| Price: | CA$43.99 |
Kato 381-106-1971 - N Scale Amtrak "rainbow Era" 8-Car Set
N Scale Amtrak "Rainbow Era" 8 Car Set
| Price: | CA$289.99 |
Athearn 72073 - HO RTR SD40T-2 - DCC Ready - D&RGW Rio Grande #5353
HO RTR SD40T-2 - DCC Ready - D&RGW Rio Grande #5353
| Price: | CA$184.99 |
K&S Engineering 16405 All Scale - 0.025 inch Thick Brass Flat Sheet - 6x12inch
0.025 inch Thick Brass Flat Sheet - 6x12inch
| Price: | CA$11.99 |
Chooch Enterprises 8267 - Flexible Vinyl Stone Wall Arches - Style 1 -- 6 Small & 5 Medium
Flexible Vinyl Stone Wall Arches - Style 1 - Small Arches
| Price: | CA$15.99 |
InterMountain Railway 4400003-05 - HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Orange) #506416
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Orange) #506416
| Price: | CA$37.99 |
K&S Engineering 8243 All Scale - Brass Strip - 12inch x 3/4inch x .032inch
Brass Strip - 12inch x 3/4inch x .032inch
| Price: | CA$2.99 |
Woodland Scenics 1882 - HO Scenic Accents - Firemen to the Rescue (8pcs)
HO Scenic Accents - Firemen to the Rescue (8pcs)
| Price: | CA$19.99 |
Intermountain Railway 46617-11 - HO USRA Composite Drop-Bottom Gondola -Ready to Run- Michigan Central #12217
HO USRA Composite Drop-Bottom Gondola -Ready to Run- Michigan Central #12217
| Price: | CA$32.99 |
Intermountain Railway 46617-07 - HO USRA Composite Drop-Bottom Gondola -Ready to Run- Michigan Central #12031
HO USRA Composite Drop-Bottom Gondola -Ready to Run- Michigan Central #12031
| Price: | CA$32.99 |
Walthers Proto 106152 - HO 55Ft Evans 4780 Covered Hopper - ADM (UELX) #30248
HO 55Ft Evans 4780 Covered Hopper - ADM (UELX) #30248
| Price: | CA$40.99 |
Sylvan Scale Models V-370 HO Scale - 1937 Studebaker COE Gasoline Tank Truck - Unpainted and Resin Cast Kit
HO Scale - 1937 Studebaker COE Gasoline Tank Truck - Unpainted and Resin Cast Kit
| Price: | CA$20.99 |
Atlas 10003872 - HO MP15DC Gold - DCC & Sound w/ Ditch Lights - Norfolk Southern #2372
HO MP15DC Gold - DCC & Sound w/ Ditch Lights - Norfolk Southern #2372
| Price: | CA$279.99 |
Athearn RTR 88645 - HO SD38 - DCC Ready - Conrail (NS) #3805
HO SD38 - DCC Ready - Conrail (NS) #3805
| Price: | CA$195.99 |
Atlas 552 - HO Code 83 Plastic Insulating Rail Joiners (24pcs)
HO Code 83 Plastic Insulating Rail Joiners (24pcs)
| Price: | CA$3.99 |
Athearn Genesis G65922 - HO GP50 - DCC & Sound - Norfolk Southern #7054
HO GP50 - DCC & Sound - Norfolk Southern #7054
| Price: | CA$347.99 |
Aurora Miniatures 305065 - HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504977
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504977
| Price: | CA$67.99 |
Iowa Scaled Engineering - HO 48ft Galvanized Steel Stiffened Backdrop Grain Bin - Kit
HO 48ft Galvanized Steel Stiffened Backdrop Grain Bin - Kit
| Price: | CA$130.99 |
Tangent Scale Models 25012-05 - HO Greenville 86ft Double Plug Door Box Car - DT&I #26753
HO Greenville 86ft Double Plug Door Box Car - DT&I #26753
| Price: | CA$68.99 |
Rapido 31587 HO - Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Seaboard Air Line - Delivery #102
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Seaboard Air Line - Delivery #102
| Price: | CA$299.99 |
Rapido 516507 - N Budd RDC-1 (Ph 2) - DC/DCC/Sound - CP Rail (Action Red)
N Budd RDC-1 (Ph 2) - DC/DCC/Sound - CP Rail (Action Red)
| Price: | CA$254.99 |
Walthers SceneMaster 4146 - HO Benches (8 pkg)
HO Benches (8 pkg)
| Price: | CA$7.99 |
Tangent Scale Models 60116-01 - HO Delivery Target Red 1953+ Steel Bay Window Caboose - Illinois Terminal #980
HO Delivery Target Red 1953+ Steel Bay Window Caboose - Illinois Terminal #980
| Price: | CA$139.99 |
Rapido 137004-D HO Scale - B-100-40 Boxcar: Golden West - Ventura County - Single Car #140011
B-100-40 Boxcar: Golden West - Ventura County - Single Car #140011
| Price: | CA$53.99 |
Brekina 19752 - HO 1975 Cadillac Eldorado Convertible - Gold
HO 1975 Cadillac Eldorado Convertible - Gold
| Price: | CA$31.99 |
Plastruct 90002 1/16in Angle (10 per package)
Plastruct 90002 1/16in Angle
| Price: | CA$11.99 |
Rapido 50637 - HO EMD SD10 - DCC & Sound - Dakota, Minnesota & Eastern #548
HO EMD SD10 - DCC & Sound - Dakota, Minnesota & Eastern #548
| Price: | CA$322.99 |
RibbonRail 1038 - HO 10 Inch Track Alignment Gauges - Curved - 38 Inch Radius
HO 10 Inch Track Alignment Gauges - Curved - 38 Inch Radius
| Price: | CA$8.99 |
ESU 58820 - LokSound V5 DCC Micro 8-Pin Sound Decoder
LokSound V5 DCC Micro 8-Pin Sound Decoder
| Price: | CA$129.99 |
A-Line Product 12034 - HO Hex Coupling Kit
HO Hex Coupling Kit
| Price: | CA$17.99 |
Juneco Scale Models C-100 - Hobos - 3 Unpainted Figures
Hobos - 3 Unpainted Figures
| Price: | CA$2.99 |
Class One Model Works CT00509 - HO Hyundai 48ft Exterior Post - EMP #254545
HO Hyundai 48ft Exterior Post - EMP #254545
| Price: | CA$20.99 |
Tamiya Paints 85084 - Spray Can - Metallic Gold (100mL)
Spray Can - Metallic Gold (100mL)
| Price: | CA$20.99 |
Athearn Roundhouse 1116 - HO Chemical Tankcar - Procor (3pkg)
HO Chemical Tankcar - Procor (3pkg)
| Price: | CA$103.99 |
Rapido 128060 - HO Horizon Club-Dinette - Amtrak (Phase lV) #58103
HO Horizon Club-Dinette - Amtrak (Phase lV) #58103
| Price: | CA$109.99 |
Intermountain 45430-06 - HO 40Ft PS-1 Boxcar - ATSF (Bx57 Grand Canyon) #31740
HO 40Ft PS-1 Boxcar - ATSF (Bx57 Grand Canyon) #31740
| Price: | CA$43.99 |
Woodland Scenics 2132 - N Scenic Accents(R) Figures -- Checker Players
N Scale Scenic Accents(R) Figures -- Checker Players
| Price: | CA$18.99 |
Caboose Industries 202 - HO Operating Ground Throw - Sprung 0.190 inch Travel
HO Operating Ground Throw - Sprung 0.190 inch Travel
| Price: | CA$3.99 |
Plastruct 91005 Gray ABS 0.060 (2pcs pkg)
Plastruct 91005 Gray ABS 0.060 (2pcs pkg)
| Price: | CA$7.99 |
Sylvan Scale Models V-381 HO Scale - 1966-77 GMC 9500 Low Mount Cab Tandem Axle Short Hood Tractor - Unpainted and Resin Cast Kit
HO Scale - 1966-77 GMC 9500 Low Mount Cab Tandem Axle Short Hood Tractor - Unpainted and Resin Cast Kit
| Price: | CA$22.99 |
Withers Publishing Norfolk Southern Locomotive Directory 2006-2007 Book
Norfolk Southern Locomotive Directory 2006-2007
| Price: | CA$25.99 |
Rapido 178003-2 - HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) #742975
HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) #742975
| Price: | CA$55.99 |
Walthers Proto 110100 - HO Jordan Spreader - Kit - Undecorated
HO Jordan Spreader - Kit - Undecorated
| Price: | CA$104.99 |
Rapido 42016 - HO GE C30-7 - DCC Ready - CSX (YN2 Scheme) #7047
HO GE C30-7 - DCC Ready - CSX (YN2 Scheme) #7047
| Price: | CA$224.99 |
Sylvan Scale Models 1050 HO Scale - Great Lakes Freighter Kit - Unpainted and Resin Cast
Great Lakes Freighter Kit - Unpainted and Resin Cast
| Price: | CA$250.99 |
Woodland Scenics 5676 HO Scale - Twin Lamp Post - 3 sets - Just Plug Lighting System
Twin Lamp Post - 3 sets
| Price: | CA$26.99 |
Rapido 33029 - HO MLW M420 A/B Set - DC/DCC Ready - British Columbia (Lightning Stripe) #642, 686
HO MLW M420 A/B Set - DC/DCC Ready - British Columbia (Lightning Stripe) #642, 686
| Price: | CA$399.99 |
Rapido 178008-4 - HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #676712
HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #676712
| Price: | CA$55.99 |
Rapido 180005-1 - HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Western Pacific #20001
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Western Pacific #20001
| Price: | CA$55.99 |
Rapido 178006-5 - HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #137313
HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #137313
| Price: | CA$55.99 |
Tangent Scale Models HO 25046-12 Detroit, Toledo & Ironton (DTI) -Delivery 1970 Magenta- Greenville 86ft Double Plug Door Box Car #26852
Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
| Price: | CA$73.99 |
Atlas 288 - HO Mark IV Code 100 Right Hand Curved Turnout
HO Mark IV Code 100 Right Hand Curved Turnout
| Price: | CA$29.99 |
Walthers Mainline 7660 HO RTR - 60 ft NSC 5150 3-bay Covered Hopper - ADMX #52340
ADMX #52340
| Price: | CA$31.99 |
Atlas Model Railroad 511 HO Code 83 Snap Track - 15 Inches Radius Curve
HO Code 83 Snap Track - 15 Inches Radius Curve
| Price: | CA$1.69 |
Rapido 50217 - HO EMD SD9 - DC/Silent - Baltimore & Ohio #771
HO EMD SD9 - DC/Silent - Baltimore & Ohio #771
| Price: | CA$229.99 |
Walthers Mainline 7950 - HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - Santa Fe (ATSF) #350019
HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - Santa Fe (ATSF) #350019
| Price: | CA$31.99 |
Bowser 25232 - HO Alco RS-3 -DCC & Sound - Spokane, Portland & Seattle - as delivered - #94
HO Alco RS-3 - DCC & Sound - Spokane, Portland & Seattle - as delivered - #94
| Price: | CA$309.99 |
Plastruct 90408 ABS 1in Warren Open Web Truss (2pcs pkg)
Plastruct 90408 ABS 1in Warren Open Web Truss (2pcs pkg)
| Price: | CA$12.99 |
Athearn Roundhouse RND2398 HO Scale - PS-2 2003 2-Bay Covered Hopper - Denver & Rio Grande Western #18010
PS-2 2003 2-Bay Covered Hopper - Denver & Rio Grande Western #18010
| Price: | CA$37.99 |
Sylvan Scale Models V-294 HO Scale - 1956 Chevy 210 Four Door Sedan - Unpainted and Resin Cast Kit
1956 Chevy 210 Four Door Sedan - Unpainted and Resin Cast Kit
| Price: | CA$11.99 |
Micro Engineering HO Scale Plastic-Insulated Transition Rail Joiners pkg(8) -- Code 83 to 70
Plastic-Insulated Transition Rail Joiners pkg(8) -- Code 83 to 70
| Price: | CA$5.49 |
Peco SLU8361 HO - North American-Style - Code 83 #6 Turnout - Streamline - Right Hand, Unifrog
North American-Style - Code 83 #6 Turnout - Streamline - Right Hand, Unifrog
| Price: | CA$38.99 |
Atlas 20006497 - HO 73Ft Center Partition Car - Union Pacific #275189
HO 73Ft Center Partition Car - Union Pacific #275189
| Price: | CA$48.99 |
Atlas 20006661 - HO 53ft Jindo Container - CSX (How Tomorrow Moves) UMXU Set #1 (3pk)
HO 53ft Jindo Container - CSX (How Tomorrow Moves) UMXU Set #1 (3pk)
| Price: | CA$48.99 |
Rapido 37511 - HO Alco FA-1 & FB-1 Set - DCC & Sound - Canadian Pacific (Script Scheme) #4015, 4406
HO Alco FA-1 & FB-1 Set - DCC & Sound - Canadian Pacific (Script Scheme) #4015, 4406
| Price: | CA$589.99 |
Rapido 27077 - HO EMD SW9 - DC/ Silent - Canadian Pacific (CP Block Scheme) #7405
HO EMD SW9 - DC/ Silent - Canadian Pacific (CP Block Scheme) #7405
| Price: | CA$229.99 |
Bowser 42865 - HO RTR 40Ft Single-Door Steel Boxcar - Western Pacific #1953
HO RTR 40Ft Single-Door Steel Boxcar - Western Pacific #1953
| Price: | CA$28.99 |
Walthers Cornerstone 4093 - HO Coal Trestle - Kit
HO Coal Trestle - Kit
| Price: | CA$33.99 |
Athearn Genesis G1158 - HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (Sand) #7021
HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (Sand) #7021
| Price: | CA$415.99 |
A-Line 29217 - HO Brass Chain - 12 Inches - 27 Links Per Inch
HO Brass Chain - 12 Inches - 27 Links Per Inch
| Price: | CA$4.99 |
Rapido 27080 - HO EMD SW9 - DC/ Silent - Erie Lackawanna (EL Gray & Maroon) #437
HO EMD SW9 - DC/ Silent - Erie Lackawanna (EL Gray & Maroon) #437
| Price: | CA$229.99 |
Tangent Scale Models HO 11241-08 PS4750 Covered Hopper ICG - Original 1979- #766807
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
| Price: | CA$67.99 |
Rapido Trains 130114-1 HO USRA 40ft Double Sheathed Wood Boxcar Wabash Road No.79687
HO USRA Double sheathed wood boxcar Wabash
| Price: | CA$51.99 |
WalthersMainline 9875 HO EMD SD70ACe - Standard DC -- Union Pacific #9010 (yellow, gray, red; Yellow Sill)
WalthersMainline HO EMD SD70ACe-DCC ready Union Pacific
| Price: | CA$180.99 |
Intermountain 47808-14 - HO 19,600 Gallon Tank Car - Cerestar (NATX) #190145
HO 19,600 Gallon Tank Car - Cerestar (NATX) #190145
| Price: | CA$44.99 |
Rapido 172005-2 - HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127408
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127408
| Price: | CA$58.99 |
Athearn Genesis G1157 - HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (NATO Green) #7020
HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (NATO Green) #7020
| Price: | CA$415.99 |
Athearn 29933 HO Scale - RTR 30,000 Gallon Ethanol Tank Car -CTCX - #1 - 3pack
Athearn HO Scale - RTR 30,000 Gallon Ethanol Tank Car - CTCX - #1 - 3pack
| Price: | CA$161.99 |
Athearn Genesis G97157 - HO Trinity 3-Bay Hopper - AGPX (3pk) #1
HO Trinity 3-Bay Hopper - AGPX (3pk) #1
| Price: | CA$173.99 |
Walthers Cornerstone 3023 - HO Elevator Add-on Silos - Kit
HO Elevator Add-on Silos - Kit
| Price: | CA$39.99 |
Athearn Genesis G75664 - HO EMD SD70M-2 Diesel - DCC & Sound - Providence and Worcester Railroad P&W #4301
HO EMD SD70M-2 Diesel - DCC & Sound - Providence and Worcester Railroad P&W #4301
| Price: | CA$414.99 |
Rapido 516007 - N Budd RDC-1 (Ph 2) - DC/Silent - CP Rail (Action Red)
N Budd RDC-1 (Ph 2) - DC/Silent - CP Rail (Action Red)
| Price: | CA$152.99 |
Rapido 40526 - HO EMD GP40 - DCC & Sound - SSW/ Cotton Belt #7607
HO EMD GP40 - DCC & Sound - SSW/ Cotton Belt #7607
| Price: | CA$322.99 |
Rapido 170003-2 - HO 50Ft PCF B70 Boxcar - w/ Youngstown Doors - SSW/Cotton Belt (with DFL) #66830
HO 50Ft PCF B70 Boxcar - w/ Youngstown Doors - SSW/Cotton Belt (with DFL) #66830
| Price: | CA$55.99 |
Athearn G31635 HO Scale - G2 Dash 9-44CW - DCC & Sound - FMG #007
G2 Dash 9-44CW - DCC & Sound - FMG #007
| Price: | CA$404.99 |
Tru Color Paint 044 - Acrylic -Penn Central Green 1 oz
Tru Color Paint 044 - Acrylic -Penn Central Green 1 oz
| Price: | CA$7.99 |
Rapido 148003 HO - GLa 2-Bay Hopper: PRR Shadow Keystone - 6(pkg)
GLa 2-Bay Hopper: PRR Shadow Keystone - 6(pkg)
| Price: | CA$274.99 |
Rapido 138004-3 HO - F30A 50Ft Flat Car: Penn Central #701550
F30A 50Ft Flat Car: Penn Central #701550
| Price: | CA$51.99 |
Rapido 123010-C HO Scale - PRR X31A Double-Door Boxcar: Shadow Keystone, Late - Single Car #69287
PRR X31A Double-Door Boxcar: Shadow Keystone, Late - Single Car #69287
| Price: | CA$51.99 |
Athearn Genesis G70581 HO - G2 SD70M-2 - DCC Ready - CN #8921
G2 SD70M-2 - DCC Ready - CN #8921
| Price: | CA$288.99 |
InterMountain 49367S-02 HO Diesel EMD SD40-2 ESU LokSound DCC - Saint Lawrence & Hudson #5627
Diesel EMD SD40-2 - Saint Lawrence & Hudson#5627
ESU LokSound DCC & Sound
| Price: | CA$319.99 |
Oxford Diecast NGG002 - N Scale 1970 Bedford RLHZ Green Goddess Self-Propelled Pump - Glamorgan Fire Service
N Scale 1970 Bedford RLHZ Green Goddess Self-Propelled Pump - Glamorgan Fire Service
| Price: | CA$13.99 |
Iowa Scaled Engineering - HO Galvanized Culvert Pipe - 24 Inches (4pk)
HO Galvanized Culvert Pipe - 24 Inches (4pk)
| Price: | CA$6.99 |
Aurora Miniatures HCBMST1 - HO 40Ft Hi-Cube Dry Containers - Maersk Sealand (3pk) Set #1
HO 40Ft Hi-Cube Dry Containers - Maersk Sealand (3pk) Set #1
| Price: | CA$48.99 |
JL Innovative 262 - HO Vintage Firearms & Sporting Signs - 1940-60s (40)
HO Vintage Firearms & Sporting Signs - 1940-60s (40)
| Price: | CA$4.99 |
SoundTraxx 884607, Blunami BLU-2200 Bluetooth Controlled Tsunami2 DCC Sound Decoder, Steam-2
SoundTraxx 884607, Blunami BLU-2200 Bluetooth Controlled Tsunami2 DCC Sound Decoder, Steam-2
| Price: | CA$184.99 |
Atlas 20006270 - HO Pressureaide Covered Hopper - Archer Daniels Midland (Leaf) #50016
HO Pressureaide Covered Hopper - Archer Daniels Midland (Leaf) #50016
| Price: | CA$41.99 |
Iconic Replica 87-0291 - 1:87 1966 GM 4107 - Indiana Motor Coach Co.
1:87 1966 GM 4107 -Indiana Motor Coach Co.
| Price: | CA$54.99 |
Walthers Mainline 45031 - HO 40ft ACF Modernized Welded Boxcar - Detroit & Mackinac #3118
HO 40ft ACF Modernized Welded Boxcar - Detroit & Mackinac #3118
| Price: | CA$34.99 |
Rapido Trains 203104 - HO UAC TurboTrain Additional Coach: Late Amtrak
HO UAC TurboTrain Additional Coach: Late Amtrak
| Price: | CA$84.99 |
Atlas 60000004 - N Scale 1978 Ford Fairmount Sedan - Black
N Scale 1998 Ford Fairmount Sedan - Black
| Price: | CA$27.99 |
Walthers Mainline 7864 - HO 59Ft Cylindrical Hopper - Toronto, Hamilton & Buffalo #1505
HO 59Ft Cylindrical Hopper - Toronto, Hamilton & Buffalo #1505
| Price: | CA$37.99 |
Sylvan Scale Models 1025 - HO Scale - Great Lakes Steam Diesel Tugboat Kit - Unpainted and Resin Cast
Great Lakes Steam Diesel Tugboat Kit - Unpainted and Resin Cast
| Price: | CA$50.99 |
BLMA Models 4553 HO Carrier Reefer Unit
Carrier Reefer Unit
| Price: | CA$8.99 |
Athearn 86842 - HO SW1000 Switcher - DCC & Sound - BNSF #3617
HO SW1000 Switcher - DCC & Sound - BNSF #3617
| Price: | CA$339.99 |
Athearn Genesis G1235 - HO EMD GP7R - DC/DCC Ready - Chicago & North Western CNW #4140
HO EMD GP7R - DC/DCC Ready - Chicago & North Western CNW #4140
| Price: | CA$249.99 |
Athearn RTR 88941 - HO SD38 - DCC/Sound - CanDo Rail Services #5201
HO SD38 - DCC/Sound - CanDo Rail Services #5201
| Price: | CA$264.99 |
Tangent Scale Models HO 200- Plate ACI Placards -8pkg
Plate ACI Placards -8pkg
| Price: | CA$7.99 |
Intermountain 497107-05 - HO ET44 Tier 4 - DCC Equipped - Kansas City Southern #5008
HO ET44 Tier 4 - DCC Equipped - Kansas City Southern #5008
| Price: | CA$224.99 |
AK Interactive 4111 - Light Rust Deposits
Light Rust Deposits
| Price: | CA$8.99 |
Athearn 16092 - HO RTR 45Ft Fruehauf Z-Van Trailer - Southern Pacific #250111
HO RTR 45Ft Fruehauf Z-Van Trailer - Southern Pacific #250111
| Price: | CA$38.99 |
Walthers SceneMaster 2605 - HO Flexi-Van 40ft Trailer - Milwaukee Road #3 (2pk)
HO Flexi-Van 40ft Trailer - Milwaukee Road #3 (2pk)
| Price: | CA$35.99 |
Iconic Replica 87-0258 - 1:87 NFI Xcelsior XN40: DDOT Detroit
1:87 NFI Xcelsior XN40: DDOT Detroit
| Price: | CA$49.99 |
Otter Valley Railroad 60000-9 - HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX (6 pkg) #4
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX (6 pkg) #4
| Price: | CA$389.99 |
Rapido 606-100385 - HO Lightweight Coach - Amtrak - Phase I #6445
HO Lightweight Coach - Amtrak - Phase I #6445
| Price: | CA$118.99 |
Rapido 149005-3 - HO Enterprise 2-Bay Covered Hopper - GFCX #110
HO Enterprise 2-Bay Covered Hopper - GFCX #110
| Price: | CA$55.99 |
Atlas Model Railroad 522 HO Code 83 Snap Track - 3 Inches Straight - 4 pcs in blister package
Code 83 Snap Track - 3 Inches Straight - 4 pcs in blister package
| Price: | CA$4.99 |
Woodland Scenics 5590 - HO Just Plug Lighted Vehicle - Green Pickup
HO Just Plug Lighted Vehicle - Green Pickup
| Price: | CA$30.99 |
Walthers SceneMaster 8571 - HO 45ft CIMC Container - Crowley
HO 45ft CIMC Container - Crowley
| Price: | CA$13.99 |
Rapido 38502 - HO Scale GP38 - DCC & Sound - Santa Fe (Yellow Warbonnet w/ Class Lights) #2337
HO Scale GP38 - DCC & Sound - Santa Fe (Yellow Warbonnet w/ Class Lights) #2337
| Price: | CA$319.99 |
Walthers Trainline 1781 - HO Flatcar w/Logging Crane - CP Rail #304860
HO Flatcar w/Logging Crane - CP Rail #304860
| Price: | CA$29.99 |
Atlas Trainman 50006235 - N Scale 60ft Coach Car - New York Central #1959
N Scale 60ft Coach Car - New York Central #1959
| Price: | CA$39.99 |
Flex-i-File 30 - Ultra Fine Red Sable Brush - Size 3/0
Ultra Fine Red Sable Brush - Size 3/0
| Price: | CA$13.99 |
Woodland Scenics 3512 - All Scale Classic Trees - Ready Made - Early Light 5-6inch (2 pkg)
All Scale Classic Trees - Ready Made - Early Light 5-6inch (2 pkg)
| Price: | CA$18.99 |
Walthers Cornerstone 4202 - HO Small Wooden Coaling Station - Kit
Small Wooden Coaling Station - Kit
| Price: | CA$47.99 |
Pikestuff 104 - HO Milton A. Corporation - Kit
HO Milton A. Corporation - Kit
| Price: | CA$45.99 |
Walthers Mainline 5512 - HO 85ft General American G85 Flatcar - Erie Lackawanna #8737
HO 85ft General American G85 Flatcar - Erie Lackawanna #8737
| Price: | CA$35.99 |
Rapido 121051-2 - HO 37ft General American Meat Reefer - Armour #11890
HO 37ft General American Meat Reefer - Armour #11890
| Price: | CA$52.99 |
Woodland Scenics 951 - All Scale Learning Kit - Rock Faces
All Scale Learning Kit - Rock Faces
| Price: | CA$20.99 |
Athearn 90640 - HO 2600 Gallon Fuel Tank Set - EMD
HO 2600 Gallon Fuel Tank Set - EMD
| Price: | CA$13.99 |
Walthers Mainline 7725 - HO 60ft NSC 5150 3-Bay Covered Hopper - Cargill (ICMX) #1007
HO 60ft NSC 5150 3-Bay Covered Hopper - Cargill (ICMX) #1007
| Price: | CA$35.99 |
Aurora Miniatures Inc 110501 HO - GMD SD50F Diesel - DCC/Sound - Canadian National - (Stripes) - #5400
110501 GMD SD50F Diesel - DC/Silent - Canadian National - (Stripes) #5400
| Price: | CA$369.99 |
Athearn Genesis G68290 Western Cullen-Beacon Set (6)
Western Cullen-Beacon Set (6)
| Price: | CA$26.99 |
Details West 248 - HO GE Type Air Filter - Set w/Mount & Pipes
HO GE Type Air Filter - Set w/Mount & Pipes
| Price: | CA$2.50 |
Faller Gmbh 272222 - N Scale Pole-Mast LED Street Light - 6.5cm Tall
N Scale Pole-Mast LED Street Light - 6.5cm Tall
| Price: | CA$10.99 |
Athearn Roundhouse 1259 HO 50ft ACF Boxcar AD&N #8102
Athearn Roundhouse HO 50ft ACF Boxcar AD&N
| Price: | CA$36.99 |
Athearn Genesis G69599 - HO F89F Trailer - RTTX/Yellow #151894
HO F89F Trailer - RTTX/Yellow #151894
| Price: | CA$59.99 |
Rapido 31574 HO - Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - New York Central - Capital Scheme #8005
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - New York Central - Capital Scheme #8005
| Price: | CA$299.99 |
RibbonRail 1030 - HO 10 Inch Track Alignment Gauges - Curved - 30 Inch Radius
HO 10 Inch Track Alignment Gauges - Curved - 30 Inch Radius
| Price: | CA$9.99 |
Rapido 142011-6- HO USRA Single-Sheathed Boxcar: PRR (Youngstown door) #564287
HO USRA Single-Sheathed Boxcar: PRR (Youngstown door)
| Price: | CA$47.99 |
Tru Color Paint 387 - Acrylic - GO Transit Dark Green - 1oz
Acrylic - GO Transit Dark Green - 1oz
| Price: | CA$7.99 |
Soundtraxx 810112 - Oval Speaker - 25 X 14mm
Oval Speaker - 25 X 14mm
| Price: | CA$17.99 |
Rapido 155002-6 - HO 40Ft Boxcar w/ Early Improved Dreadnaught Ends - Great Northern (Chinese Red) #21901
HO 40Ft Boxcar w/ Early Improved Dreadnaught Ends - Great Northern (Chinese Red)
| Price: | CA$54.99 |
Woodland Scenics 5023 - HO Built-&-Ready Landmark Structures - Dansbury Depot
Built-&-Ready Landmark Structures - Dansbury Depot
| Price: | CA$94.99 |
Intermountain Red Caboose 32524-25 - HO Evans 100 Ton Coil Car - Chicago & North Western #39603
HO Evans 100 Ton Coil Car - Chicago & North Western #39603
| Price: | CA$43.99 |
Rapido 50619 - HO EMD SD9 - DCC & Sound - Chicago & North Western #6605
HO EMD SD9 - DCC & Sound - Chicago & North Western #6605
| Price: | CA$322.99 |
Rapido 169020 - HO AutoFlood III RD Coal Hopper - PGNX #1180
HO AutoFlood III RD Coal Hopper - PGNX #1180
| Price: | CA$66.99 |
Woodland Scenics 62 - HO Coarse Turf - Burnt Grass
HO Coarse Turf - Burnt Grass
| Price: | CA$6.99 |
Rapido Trains 50049-2 - HO 52Ft 6In Mill Gondola: Canadian National - 12In Lettering Scheme #149966
HO 52Ft 6In Mill Gondola: Canadian National - 12In Lettering Scheme #149966
| Price: | CA$52.99 |
Rapido 146046 - HO Single BiLevel Commuter Car - Metrolink (White Ribbon) #187
HO Single BiLevel Commuter Car - Metrolink (White Ribbon) #187
| Price: | CA$110.99 |
Atlas 20006675 - HO 53ft CIMC Container - Canadian Pacific Set #1 (3pk)
HO 53ft Jindo Container - Canadian Pacific Set #1 (3pk)
| Price: | CA$48.99 |
Tamiya Paints 81316 - Acrylic Flat Colors - Flat Aluminum - 3/4oz (23mL) Bottle
Acrylic Flat Colors - Flat Aluminum - 3/4oz (23mL) Bottle
| Price: | CA$4.99 |
Sylvan Scale Models V-352 HO Scale - 46/47 Mercury Half Ton Flatbed- Unpainted and Resin Cast Kit
46/47 Mercury Half Ton Flatbed- Unpainted and Resin Cast Kit
| Price: | CA$14.99 |
Rapido 25004 - HO Rohr Turboliner - DC/ Silent - Amtrak Phase 3 (late) - set #4
Amtrak Phase 3 (late) - set #4
| Price: | CA$719.99 |
Cal Scale 323 - HO Steam Turrett - Brass Casting
HO Steam Turrett - Brass Casting
| Price: | CA$3.99 |
Walthers Cornerstone 3764 - HO Ashmore Hotel - Kit
HO Ashmore Hotel - Kit
| Price: | CA$73.99 |
Classic Metal Works 30618 - HO 1976 Chevy Stepside Pickup - Midnight Black
HO 1976 Chevy Stepside Pickup - Midnight Black
| Price: | CA$20.99 |
Walthers Mainline 5479 - HO RTR - 85ft General American G85 Flatcar - Trailer Train - Santa Fe #89775
85ft General American G85 Flatcar - Trailer Train - Santa Fe #89775
| Price: | CA$31.99 |
InterMountain 45258 - HO Bi-Level Auto Rack - UP Rack/TTGX Flat Car #981785
HO Bi-Level Auto Rack - UP Rack/TTGX Flat Car #981785
| Price: | CA$99.99 |
Tamiya Paints 86532 - Spray Can - Medium Sea Gray #2 (RAF) (100mL)
Spray Can - Medium Sea Gray #2 (RAF) (100mL)
| Price: | CA$8.99 |
Rapido 19512- HO GMD F59PH - DCC/Sound - Metra #99
Metra #99
| Price: | CA$269.99 |
Bowser 24829 - HO MLW M630 - DCC & Sound - CP Rail (Multimark) #4570
HO MLW M630 - DCC & Sound - CP Rail (Multimark) #4570
| Price: | CA$299.99 |
Walthers Mainline 8220 - HO 89Ft Flatcar w/Tri-Level Open Auto Rack - St. Louis San Francisco Rack/ Trailer-Train Flatcar #913646
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - St. Louis San Francisco Rack/ Trailer-Train Flatcar #913646
| Price: | CA$48.99 |
Bowser 42572 - HO N5 Caboose - Reading & Northern #477514
HO N5 Caboose - Reading & Northern #477514
| Price: | CA$28.99 |
K&S Engineering 8209 All Scale - 1/4 inch OD Round Brass Tube - 0.029inch Thick x 12inch Long
1/4 inch OD Round Brass Tube - 0.029inch Thick x 12inch Long
| Price: | CA$5.99 |
Athearn Roundhouse HO 2268 40ft Steel Reefer Swift #5695
Athearn 40ft Steel Reefer
| Price: | CA$30.99 |
Rapido 28816 - HO HEP E8A + A Set - DCC & Sound - Canadian National (Executive - Noodle) #102/103
HO HEP E8A + A Set - DCC & Sound - Canadian National (Executive - Noodle) #102/103
| Price: | CA$644.99 |
Walthers SceneMaster 11733 - HO International 4300 Utility Truck w/Drill - Assembled - White
HO International 4300 Utility Truck w/Drill - Assembled - White
| Price: | CA$22.99 |
Bowser 25400 - HO GMD SD40-2W - DC/DCC Ready - CN (Non Dynamic Sergeant Stripes) #5361
HO GMD SD40-2W - DC/DCC Ready - CN (Non Dynamic Sergeant Stripes) #5361
| Price: | CA$239.99 |
Tangent Scale Models HO 25046-03 Detroit, Toledo & Ironton (DTI) -Delivery 1970 Magenta- Greenville 86ft Double Plug Door Box Car #26828
Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
| Price: | CA$73.99 |
Athearn RTR 98486 HO Scale - Ortner 5-Bay Rapid Discharge Hopper - OMAX (5-pack) #2
Ortner 5-Bay Rapid Discharge Hopper - OMAX (5-pack) #2
| Price: | CA$206.99 |
Bowser 42829 - HO RTR 40Ft Steel Side Boxcar - Delaware Lackawanna & Western (Blue Coal) #51502
HO RTR 40Ft Steel Side Boxcar - Delaware Lackawanna & Western (Blue Coal) #51502
| Price: | CA$29.99 |
Walthers Cornerstone 2934 - HO Silver Springs Bus Terminal - Kit
HO Silver Springs Bus Terminal - Kit
| Price: | CA$60.99 |
Woodland Scenics 1956 - HO Scenic Accent Figures - Young & Old (3 Pairs)
HO Scenic Accent Figures - Young & Old (3 Pairs)
| Price: | CA$18.99 |
Tamiya LP45 Racing Blue Mini Lacquer Finish 10ml
Mini Lacquer Finish Paint
| Price: | CA$3.99 |
Bachmann 00642 HO Thomas with Annie and Clarabel Set
HO Thomas with Annie and Clarabel Set
| Price: | CA$227.99 |
WalthersMainline 4852-HO - 72Ft Centerbeam Flatcar with Standard Beam - Ready to Run - Southern #601070
72Ft Centerbeam Flatcar with Standard Beam - Ready to Run - Southern #601070
| Price: | CA$32.99 |
Athearn 3548 - N Scale 52Ft Mill Gondola - CEFX (3pkg)
N Scale 52Ft Mill Gondola - CEFX (3pkg)
| Price: | CA$97.99 |
Testors 1244 - Spray Enamel - Metallic Gold (3oz)
Testors - Spray Enamel - Metallic Gold (3oz)
| Price: | CA$11.99 |
Rapido 159003 - HO Union X-3 Tankcar - UTLX (1930s Paint) (6 pkg) #2
HO Union X-3 Tankcar - UTLX (1930s Paint) (6 pkg) #2
| Price: | CA$289.99 |
NixTrainz 3 - Decoder Buddy Mini 2.2K Axial
Decoder Buddy Mini 2.2K Axial
| Price: | CA$15.99 |
Atlas 50006000 - N Scale 40Ft Refrigerated Container - ONE Set #1 (3 pkg)
N Scale 40Ft Refrigerated Container - ONE Set #1 (3 pkg)
| Price: | CA$38.99 |
Tangent Scale Models HO 25520-03 Greenville 86ft Quad Plug Door Boxcar- SP -B-70-54 Delivery 2-1970- #616534
Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- SP -B-70-54 Delivery 2-1970
| Price: | CA$68.99 |
Woodland Scenics 74 - Ballast Bag - Fine Light Gray (21.6 in3)
Ballast Bag - Fine Light Gray (21.6 in3)
| Price: | CA$7.99 |
Bachmann 67404 HO - Siemens ACS-64 - DCC & Sound - Amtrak/Demonstrator (Flag)
HO - Siemens ACS-64 - DCC & Sound - Amtrak/Demonstrator (Flag)
| Price: | CA$364.99 |
Rapido 138003-5 HO - F30A 50Ft Flat Car: PRR 1960s Era #475003
F30A 50Ft Flat Car: PRR 1960s Era #475003
| Price: | CA$51.99 |
Bowser 41826 HO 14 Panel 70 Ton Hopper Delaware & Hudson #9063
Delaware & Hudson #9063 (black, yellow, Spelled-Out Road name)
| Price: | CA$24.99 |
InterMountain 452108 HO Bi-Level Auto Rack - CSX/TTGX Flat Car #993086
HO Bi-Level Auto Rack - CSX/TTGX Flat Car #993086
| Price: | CA$99.99 |
Evergreen Scale Models 2100 .100in Opaque White Polystrene V Groove Siding (1 Sheet)
Evergreen Scale Models 2100 .100in Opaque White Polystrene V Groove Siding (1 Sheet)
| Price: | CA$7.99 |
Walthers Mainline 5838 - HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian Pacific #304666
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian Pacific #304666
| Price: | CA$38.99 |
Tru Color Paint 031 - Acrylic Paint - B&M Blue (1oz)
Acrylic Paint - B&M Blue (1oz)
| Price: | CA$7.99 |
Bowser 25191 - HO ALCo RS-3, Phase 3 - DCC/Sound - Boston & Maine #1512
HO ALCo RS-3, Phase 3 - DCC/Sound - Boston & Maine #1512
| Price: | CA$309.99 |
Athearn 26480 - HO RTR 55 F-100 Panel Truck - Reliable Plumbing
HO RTR 55 F-100 Panel Truck - Reliable Plumbing
| Price: | CA$32.99 |
Tamiya Paints 87032 Masking Tape - 18mm
87032 Masking Tape - 18mm
| Price: | CA$8.99 |
Evergreen Scale Models 123 Opaque White Polystyrene Strips 14in .02x.06 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.06 (10pcs pkg)
| Price: | CA$4.49 |
Tichy Train 8260 - HO High Speed Limit Signs (16pk)
HO High Speed Limit Signs (16pk)
| Price: | CA$4.99 |
Otter Valley Railroad 64007 - HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14087
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14087
| Price: | CA$64.99 |
Athearn RND06806 - HO 40Ft Wood Reefer - UTRX #11633
HO 40Ft Wood Reefer - UTRX #11633
| Price: | CA$38.99 |
Bowser 25392 - HO GMD SD40-2W - DC/DCC Ready - CN (Non Dynamic Sergeant Stripes) #5360
HO GMD SD40-2W - DC/DCC Ready - CN (Non Dynamic Sergeant Stripes) #5360
| Price: | CA$239.99 |
Athearn Genesis G75728 - HO SD70 - DCC Ready - Norfolk Southern #2567
HO SD70 - DCC Ready - Norfolk Southern #2567
| Price: | CA$273.99 |
AK Interactive 302 Grey Deck Wash Enamel Paint 35ml
enamel paint
| Price: | CA$8.99 |
Rapido 193003-4 - HO Trenton Works 6348 CN Boxcar - Canadian National (w/ Conspicuity Stripes) #598145
HO Trenton Works 6348 CN Boxcar - Canadian National (w/ Conspicuity Stripes) #598145
| Price: | CA$55.99 |
JL Innovative 712 - HO Custom Brown Wood Barrels - Food/Flour (5pk)
HO Custom Brown Wood Barrels - Food/Flour (5pk)
| Price: | CA$7.99 |
Athearn Genesis G75625 - HO G2.0 SD60M Tri-Clops - DCC & Sound - Ex-BN CIT Group (CBFX) #6028
HO G2.0 SD60M Tri-Clops - DCC & Sound - Ex-BN CIT Group (CBFX) #6028
| Price: | CA$419.99 |
Otter Valley Railroad 64115 - HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #00006
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #00006
| Price: | CA$64.99 |
Rapido 53505 - HO EMD FT A+B Set - DC/DCC/Sound - AT&SF (Freight Scheme) #100L + 100A
HO EMD FT A+B Set - DC/DCC/Sound - AT&SF (Freight Scheme) #100L + 100A
| Price: | CA$670.99 |
Tru Color Paint 007 - Acrylic -Primer - 1oz
Tru Color Paint 007 - Acrylic -Primer - 1oz
| Price: | CA$7.99 |
Walthers Mainline 50706 - HO 72Ft Centerbeam Flatcar w/Standard Beam - Duluth, Winnipeg & Pacific #626675
HO 72Ft Centerbeam Flatcar w/Standard Beam - Duluth, Winnipeg & Pacific #626675
| Price: | CA$38.99 |
Walthers Cornerstone 3096 - HO Valley Growers Association Steel Grain Elevator - Kit
HO Valley Growers Association Steel Grain Elevator - Kit
| Price: | CA$57.99 |
Classic Metal Works 30624 - HO 1975 Buick Estate Wagon - Dark Green
HO 1975 Buick Estate Wagon - Dark Green
| Price: | CA$20.99 |
Intermountain 472246-04 HO Scale - 4785 PS2-CD Covered Hopper - Late - Conrail Grey Quality Logo #888886
Late - Conrail Grey Quality Logo #888886
| Price: | CA$45.99 |
Iowa Scaled Engineering - ATOM DCC Block Detector
ATOM DCC Block Detector
| Price: | CA$25.99 |
Walthers Cornerstone 3257 - N Scale Union Station - Kit
N Scale Union Station - Kit
| Price: | CA$72.99 |
Athearn 28764 - HO RTR SW1500 Switcher - DCC & Sound - Conrail #9619
HO RTR SW1500 Switcher - DCC & Sound - Conrail #9619
| Price: | CA$344.99 |
Digitrax SN2AB - N Scale Mainline Signaling Kit
SN2AB - N Scale Mainline Signaling Kit
| Price: | CA$29.99 |
Tamiya Paints 85041 - Spray Can -Coral Blue (100mL)
Spray Can - Coral Blue(100mL)
| Price: | CA$7.99 |
Tangent Scale Models HO 25520-05 Greenville 86ft Quad Plug Door Boxcar- SP -B-70-54 Delivery 2-1970- #616539
Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- SP -B-70-54 Delivery 2-1970
| Price: | CA$68.99 |
Tamiya Paints 81359 - Acrylic Flat Colors - Desert Yellow - 3/4oz (23mL) Bottle
Acrylic Flat Colors - Desert Yellow - 3/4oz (23mL) Bottle
| Price: | CA$4.99 |
Walthers Proto 101520 - HO 89ft Thrall Bi-Level Auto Carrier - FEC/TTGX #156353
HO 89ft Thrall Bi-Level Auto Carrier - FEC/TTGX #156353
| Price: | CA$76.99 |
InterMountain 45275-06 HO - Bi-Level Auto Racks - BNSF New Image - Orange Rack on TTGX Flat Car #TTGX 978188
Bi-Level Auto Racks - BNSF New Image - Orange Rack on TTGX Flat Car #TTGX 978188
| Price: | CA$99.99 |
Kato Unitrack 20170 - N Scale Curved Track Section - 45-Degree, 8-1/2 inch Diameter (4pk)
N Scale Curved Track Section - 45-Degree, 8-1/2 inch Diameter (4pk)
| Price: | CA$10.99 |
Aurora Miniatures HCBMKT3 - HO 40Ft Hi-Cube Dry Containers - Maersk Line (Small Logo) (3pk)
HO 40Ft Hi-Cube Dry Containers - Maersk Line (Small Logo) (3pk)
| Price: | CA$48.99 |
Athearn Genesis G28616 - HO F45 - DCC/Sound - Wisconsin Central #6653
HO F45 - DCC/Sound - Wisconsin Central #6653
| Price: | CA$339.99 |
Walthers Proto 104214 - HO 89Ft Bethlehem Flush-Deck Flatcar - Santa Fe #296640
HO 89Ft Bethlehem Flush-Deck Flatcar - Santa Fe #296640
| Price: | CA$53.99 |
Intermountain 45137-06 - HO 59Ft 4550 Cu. Ft. Cylindrical Covered Hopper - Trough Hatch - Santa Fe (ex-Koppel) #317649
HO 59Ft 4550 Cu. Ft. Cylindrical Covered Hopper - Trough Hatch - Santa Fe (ex-Koppel) #317649
| Price: | CA$45.99 |
Rapido 182001-5 - HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) #484643
HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) #484643
| Price: | CA$55.99 |
Athearn Genesis G15851 - HO ACF 4600 3-Bay Centerflow Hopper - C&NW #180053
HO ACF 4600 3-Bay Centerflow Hopper - C&NW #180053
| Price: | CA$75.99 |
Rapido 083611 - HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #242
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #242
| Price: | CA$279.99 |
Kadee 3 - HO Assembled #148 Whisker Metal Couplers - Medium (9/32 inch) Centerset Shank (2pair)
HO Assembled #148 Whisker Metal Couplers - Medium (9/32 inch) Centerset Shank (2pair)
| Price: | CA$9.99 |
Rapido 40516 - HO EMD GP40 - DCC & Sound - MKT (Green & Yellow) #216
HO EMD GP40 - DCC & Sound - MKT (Green & Yellow) #216
| Price: | CA$322.99 |
Atlas 20006678 - HO 53ft CIMC Container - EMP ex-FEC Set #2 (3pk)
HO 53ft Jindo Container - EMP ex-FEC Set #2 (3pk)
| Price: | CA$48.99 |
Athearn Genesis G25766 - HO 13,600 Gallon Acid Tank Car - Union Tank Car/Black (UTLX) (3pkg)
HO 13,600 Gallon Acid Tank Car - Union Tank Car/Black (UTLX) (3pkg)
| Price: | CA$179.99 |
Micro Engineering N Code 70 Bridge Flex Track
N Code 70 Bridge Flex Track
| Price: | CA$12.99 |
Atlas 4002082 HO - 3D Stack Of Presents (4/Pkg)
HO - 3D Stack Of Presents (4/Pkg)
| Price: | CA$8.99 |
Intermountain 45426-04 - HO 40Ft PS-1 Boxcar - Port Huron & Detroit #1158
HO 40Ft PS-1 Boxcar - Port Huron & Detroit #1158
| Price: | CA$43.99 |
Rapido 181007-3 - HO 1937 AAR 40Ft Boxcar - Round Corner Ends - New York Central (NYC Green) #157247
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - New York Central (NYC Green) #157247
| Price: | CA$55.99 |
Digitrax DH166PS - HO 1.5 Amp Premium Decoder w/Digitrax Easy Connect 9 Pin to DCC Medium Plug - 1.0 inch Harness
HO 1.5 Amp Premium Decoder w/Digitrax Easy Connect 9 Pin to DCC Medium Plug - 1.0 inch Harness
| Price: | CA$38.99 |
Athearn Genesis G82716 - HO EMD GP7 - DCC & Sound - Maine Central MEC #563
HO EMD GP7 - DCC & Sound - Maine Central MEC #563
| Price: | CA$368.99 |
Walthers 1204 SceneMaster - Static Grass Flocking - Brown
Brown 1/16inch 1.5mm Fibers, 3-1/2oz 100g
| Price: | CA$14.99 |
Bowser 24827 - HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4573
HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4573
| Price: | CA$202.99 |
Rapido 172005-5 - HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127420
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127420
| Price: | CA$58.99 |
Intermountain 497112S-01 - HO ET44 Tier 4 - DCC & Sound - CN Heritage/Illinois Central #3008
HO ET44 Tier 4 - DCC & Sound - CN Heritage/Illinois Central #3008
| Price: | CA$309.99 |
Tru Color Paint 086 - Acrylic - Burlington Red - 1oz
Tru Color Paint - Acrylic - Burlington Red - 1oz
| Price: | CA$7.99 |
Detail Associates 2561 Pan Head Screws 1/72 x 1/8inch
Pan Head Screws 1/72 x 1/8inch
| Price: | CA$4.99 |
Walthers Cornerstone 4151 - HO Modern Sectional House with Garage - Kit
HO Modern Sectional House with Garage - Kit
| Price: | CA$35.99 |
Micro Engineering 14712 - HO Code 83 Ladder Track System Turnout - #5b Left Hand Curved Diverging Track
HO Code 83 Ladder Track System Turnout - #5b Left Hand Curved Diverging Track
| Price: | CA$26.99 |
Woodland Scenics 1638 Underbrush - 32oz Shaker Forest Green
Forest Green
| Price: | CA$17.99 |
Otter Valley Railroad 64139 - HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15433
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15433
| Price: | CA$69.99 |
Athearn Genesis G19691 - HO EMD F7A/F7A Set - DCC & Sound - Wabash #1169-A/#1189
HO EMD F7A/F7A Set - DCC & Sound - Wabash #1169-A/#1189
| Price: | CA$710.99 |
Atlas 20006428 - HO Gunderson Multi-Max Auto Rack - Canadian Pacific (Beaver) #697886
HO Gunderson Multi-Max Auto Rack - Canadian Pacific (Beaver) #697886
| Price: | CA$69.99 |
Rapido 148008-4 HO - GLa 2-Bay Hopper: New York, Ontario & Western #1312
GLa 2-Bay Hopper: New York, Ontario & Western #1312
| Price: | CA$47.99 |
Athearn 18779 - HO RTR PS 4740 Covered Hopper - CATX #5020
HO RTR PS 4740 Covered Hopper - CATX #5020
| Price: | CA$43.99 |
Woodland Scenics 5322 - N Scale AutoScenes - Billy Browns Coupe
N Scale AutoScenes - Billy Browns Coupe
| Price: | CA$21.99 |
Rapido 149005-6 - HO Enterprise 2-Bay Covered Hopper - GFCX #134
HO Enterprise 2-Bay Covered Hopper - GFCX #134
| Price: | CA$55.99 |
Otter Valley Railroad 64074 - HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Early CWSX #140047
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Early CWSX #140047
| Price: | CA$64.99 |
Rapido 84512 HO - EP-5 Electric Loco - DCC & Sound - Penn Central, Black #4975
EP-5 Electric Loco - DCC & Sound - Penn Central, Black #4975
| Price: | CA$474.99 |
Rapido 27099 - HO EMD SW9 - DC/ Silent - Generic Industrial Yellow - Unlettered
HO EMD SW9 - DC/ Silent - Generic Industrial Yellow - Unlettered
| Price: | CA$229.99 |
Rapido 142007-3- HO USRA Single-Sheathed Boxcar: D&H #17417
HO USRA Single-Sheathed Boxcar: D&H
| Price: | CA$47.99 |
Intermountain 47113-04 - HO Bathtub Coal Gondola - MWCX (ex-CP) #100429
HO Bathtub Coal Gondola - MWCX (ex-CP) #100429
| Price: | CA$46.99 |
Walthers Mainline HO 5822 60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- TTX #92333
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- TTX
| Price: | CA$32.99 |
Otter Valley Railroad 64018 - HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0018
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0018
| Price: | CA$64.99 |
Otter Valley Railroad 6031- N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21125
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21125
| Price: | CA$43.99 |
Rapido 27509 HO EMD SW1200 - DCC/Sound - Chicago & North Western #1211
HO EMD SW1200 - DCC/Sound - Chicago & North Western #1211
| Price: | CA$304.99 |
ShowCase Miniatures 3004 - HO Scale Grumman LLV Delivery Truck Kit
HO Scale Grumman LLV Delivery Truck Kit
| Price: | CA$30.90 |
Tru Color Paint 0182 - Acrylic - Clear Gloss - 2oz
Tru Color Paint - Acrylic - Clear Gloss - 2oz
| Price: | CA$13.99 |
Athearn Genesis G1160 - HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (Two-Tone Gray) #7023
HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (Two-Tone Gray) #7023
| Price: | CA$415.99 |
Athearn Genesis G1221 - HO GE Dash 9-44CW - DCC & Sound - Burlington Northern Santa Fe (BNSF Heritage I) #1044
HO GE Dash 9-44CW - DCC & Sound - Burlington Northern Santa Fe (BNSF Heritage I) #1044
| Price: | CA$409.99 |
Athearn RTR 26736 - HO 50ft FMC Combo Door Boxcar - Railbox/ABOX #51963
HO 50ft FMC Combo Door Boxcar - Railbox/ABOX #51963
| Price: | CA$45.99 |
Walthers Layout Control System 144 - Edge Connector for Tortoise(TM) Switch Machine w/Green PC Board (2pk)
Edge Connector for Tortoise(TM) Switch Machine w/Green PC Board (2pk)
| Price: | CA$10.99 |
Walthers Mainline 3926 - HO 57ft Mechanical Reefer - Union Pacific/ARMN #756036
HO 57ft Mechanical Reefer - Union Pacific/ARMN #756036
| Price: | CA$32.99 |
Woodland Scenics 378 - Adjustable Stick-On Weights - 2oz
Adjustable Stick-On Weights - 2oz
| Price: | CA$5.99 |
Rapido 40531 - HO EMD GP40 - DCC & Sound - Wisconsin Central #3011
HO EMD GP40 - DCC & Sound - Wisconsin Central #3011
| Price: | CA$322.99 |
Athearn Genesis G82346 - HO GP7 - DCC & Sound - Bangor And Aroostook #1776
HO GP7 - DCC & Sound - Bangor And Aroostook #1776
| Price: | CA$372.99 |
Woodland Scenics 1581 Conifer Tree Value Pack - Ready Made Trees
Conifer Tree Value Pack - Ready Made Trees
| Price: | CA$43.99 |
Sylvan Scale Models 10501 HO Scale - Great Lakes Ore Boat Kit - Unpainted and Resin Cast
Great Lakes Ore Boat Kit - Unpainted and Resin Cast
| Price: | CA$250.99 |
Kato Unitrack 2-260 - HO Curved Track - 22.5 Degrees - 16-7/8 Inch Radius (4pk)
HO Curved Track - 22.5 Degrees - 16-7/8 Inch Radius (4pk)
| Price: | CA$19.99 |
Athearn Genesis G71716 - HO GP38-2 - DCC Ready - Grand Trunk Western (GTW) #5856
HO GP38-2 - DCC Ready - Grand Trunk Western (GTW) #5856
| Price: | CA$252.99 |
Rapido 24507 - HO Dash 8-40CM - DCC & Sound - Canadian National: Website #2400
HO Dash 8-40CM - DCC & Sound - Canadian National: Website #2400
| Price: | CA$337.99 |
Rix 506 HO Water/Oil Tank Ladder Kit
Kit
| Price: | CA$3.99 |
Digitrax UT6D - Duplex Radio Utility Throttle
UT6D - Duplex Radio Utility Throttle
| Price: | CA$197.99 |
Walthers SceneMaster 11003 - HO Farm Combine w/Grain & Corn Heads - Kit
HO Farm Combine w/Grain & Corn Heads - Kit
| Price: | CA$43.99 |
Brekina 85655 - HO 1980 Volvo N 10 Dump Truck - Assembled - Mint Green, Gray
HO 1980 Volvo N 10 Dump Truck - Assembled - Mint Green, Gray
| Price: | CA$45.99 |
Athearn 29928 HO Scale - RTR 30,000 Gallon Ethanol Tank Car - CHSX - #255010
Athearn HO Scale - RTR 30,000 Gallon Ethanol Tank Car - CHSX - #255010
| Price: | CA$57.99 |
Intermountain 47111-08 - HO Bathtub Coal Gondola - DREX (ex-Procor) #104061
HO Bathtub Coal Gondola - DREX (ex-Procor) #104061
| Price: | CA$46.99 |
Walthers Cornerstone 3528 - HO Modern Water Tower - Kit
HO Modern Water Tower - Kit
| Price: | CA$29.99 |
Rapido 175012 - HO SP 3/4 Dome-Lounge w/Flat Sides - Amtrak (Phase 1) #9372
HO SP 3/4 Dome-Lounge w/Flat Sides - Amtrak (Phase 1) #9372
| Price: | CA$159.99 |
Evergreen Scale Models 4523 - .040in x .375in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
.040in x .375in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
| Price: | CA$10.99 |
Rapido 50631 - HO EMD SD10 - DCC & Sound - Milwaukee Road #546
HO EMD SD10 - DCC & Sound - Milwaukee Road #546
| Price: | CA$322.99 |
Rapido 155007-3 - HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Big Sky Blue) #5177
HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Big Sky Blue)
| Price: | CA$54.99 |
Woodland Scenics 5770 All Scale Power Supply - Just Plug Lighting System Output: 24V AC 1000mA
Output: 24V AC 1000mA
| Price: | CA$27.99 |
Rapido 38004 - HO Scale GP38 - DC/DCC Ready - Santa Fe (Yellow Warbonnet w/o Class Lights) #2346
HO Scale GP38 - DC/DCC Ready - Santa Fe (Yellow Warbonnet w/o Class Lights) #2346
| Price: | CA$228.99 |
Athearn Genesis G31662 - HO Dash 9-44CW - DCC/Sound - UP #9696
HO Dash 9-44CW - DCC/Sound - UP #9696
| Price: | CA$429.99 |
Bowser 42796 - HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - Conrail #53870
HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - Conrail
| Price: | CA$28.99 |
AK Interactive 60 Dust Effects & White Spirit Enamel Paint Set -011, 015, 022
Dust Effects & White Spirit Enamel Paint Set -011, 015, 022
| Price: | CA$25.99 |
Rapido 198010-1 HO PC&F 5241 CUFT - Boxcar - BKTY Patch 2 (UP) - Single Car #153475
HO PC&F 5241 CUFT - Boxcar - BKTY Patch 2 (UP) - Single Car #153475
| Price: | CA$54.99 |
Walthers Mainline 2959 - HO 60ft Hi-Cube Plate F Boxcar - BNSF #761192
HO 60ft Hi-Cube Plate F Boxcar - BNSF #761192
| Price: | CA$31.99 |
Otter Valley Railroad 6424- N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OAKX #62
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OAKX #62
| Price: | CA$43.99 |
Walthers Mainline 7961 - HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - CSX #242077
HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - CSX #242077
| Price: | CA$31.99 |
Downtown Deco 1035 HO Kitty Korner Kit
Kitty Korner
| Price: | CA$44.99 |
Bowser 43098 - HO RTR 70 Ton 2 Ballast Hopper w/ Side Chutes - Conrail #53818
HO RTR 70 Ton 2 Ballast Hopper w/ Side Chutes - Conrail #53818
| Price: | CA$29.99 |
Micro Engineering 14719 - HO Code 83 Ladder Track System Turnout - #5e Right Hand Last Ladder
HO Code 83 Ladder Track System Turnout - #5e Right Hand Last Ladder
| Price: | CA$37.99 |
Athearn Genesis G87689 HO Scale - GATC 2600 Airslide Hopper - GATX #47066
HO Scale - GATC 2600 Airslide Hopper - GATX #47066
| Price: | CA$59.99 |
Walthers SceneMaster 4179 - HO Cattails (60 pack)
HO Cattails (60 pack)
| Price: | CA$10.99 |
InterMountain 452105 - HO Bi-Level Auto Rack - Norfolk Southern/TTGX Flat Car #973881
HO Bi-Level Auto Rack - Norfolk Southern/TTGX Flat Car #973881
| Price: | CA$99.99 |
Walthers Proto 101425 - HO 89ft Thrall Enclosed Tri-Level Auto Carrier - Norfolk Southern/ETTX Flat #33488/700392
HO 89ft Thrall Enclosed Tri-Level Auto Carrier - Norfolk Southern/ETTX Flat #33488/700392
| Price: | CA$66.99 |
Walthers Mainline 6282 - HO 53ft Railgon Gondola - Railgon/GONX #310570
HO 53ft Railgon Gondola - Railgon/GONX #310570
| Price: | CA$33.99 |
InterMountain Railway 4400001-11 - HO Value Line RTR - 13 Panel Coalporter - Conrail #503061
HO Value Line RTR - 13 Panel Coalporter - Conrail #503061
| Price: | CA$37.99 |
Aurora Miniatures Inc 110512 HO - GMD SD50AF Dakota Missouri Valley & Western - Diesel - DCC/Sound - #5501
110512 GMD SD50AF Dakota Missouri Valley & Western - Diesel - DCC/Sound -#5501
| Price: | CA$369.99 |
Athearn Genesis G1227 - HO GE Dash 9-44CW - DCC & Sound - Canadian National CN #2522
HO GE Dash 9-44CW - DCC & Sound - Canadian National CN #2522
| Price: | CA$409.99 |
Woodland Scenics 5680 All Scale - Just Plug(TM) Sequencing Light Hub
Sequencing Light Hub
| Price: | CA$26.99 |
Intermountain 47811-13 - HO 19,600 Gallon Tank Car - Tate & Lyle #51007
HO 19,600 Gallon Tank Car - Tate & Lyle #51007
| Price: | CA$44.99 |
Walthers Mainline 45014 - HO 40ft ACF Modernized Welded Boxcar - Penn Central #138166
HO 40ft ACF Modernized Welded Boxcar - Penn Central #138166
| Price: | CA$33.99 |
Atlas 40005373 - N Scale GP-9 TT - Gold DCC Sound - Toronto Hamilton & Buffalo #403
Atlas - N Scale GP-9 TT - Gold DCC Sound - Toronto Hamilton & Buffalo #403
| Price: | CA$239.99 |
Chooch 8661 - HO/N Flexible Herringbone Dark Red Brick Sheet (2-Pack) - Small
HO/N Flexible Herringbone Dark Red Brick Sheet (2-Pack) - Small
| Price: | CA$23.99 |
WalthersProto 49710 HO - EMD GP9 Phase II, High Short Hood - Standard DC - Soo Line #2412
EMD GP9 Phase II, High Short Hood - Standard DC - Soo Line #2412
| Price: | CA$199.99 |
Woodland Scenics 5043 - HO Windmill - Built & Ready Landmark Structures
HO Windmill - Built & Ready Landmark Structures
Assembled - 3-5/8 x 1-3/4 inches 9.2 x 4.5cm
| Price: | CA$26.99 |
Woodland Scenics 168 - Lichen - Dark Green Mix (173 in3)
Lichen - Dark Green Mix (173 in3)
| Price: | CA$26.99 |
Athearn Genesis G82374 - HO GP9 - DCC & Sound - Great Northern #682
HO GP9 - DCC & Sound - Great Northern #682
| Price: | CA$369.99 |
Otter Valley Railroad 60003 - HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20084
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20084
| Price: | CA$69.99 |
Walthers Mainline 8122 - HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Norfolk & Western Rack & Flatcar #412024
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Norfolk & Western Rack & Flatcar #412024
| Price: | CA$48.99 |
Walthers Cornerstone 3771 - HO Rivoli Theatre - Kit
HO Rivoli Theatre - Kit
| Price: | CA$36.99 |
Woodland Scenics 5065 HO Built-&-Ready Landmark Assembled Structures Rustic Cabin
Rustic Cabin
| Price: | CA$79.99 |
Athearn Genesis G97145 - HO Trinity 3-Bay Hopper - CAGX (3pk) #1
HO Trinity 3-Bay Hopper - CAGX (3pk) #1
| Price: | CA$173.99 |
Rapido 158001-5 - HO NSC Ballast Hopper - Canadian National (Maintenance Scheme) #302241
HO NSC Ballast Hopper - Canadian National (Maintenance Scheme) #302241
| Price: | CA$55.99 |
Midwest Products 5336 - Craft Plywood Sheet - 12 x 24inch x 1/2inch Thick - Single Piece
Craft Plywood Sheet - 12 x 24inch x 1/2inch Thick - Single Piece
| Price: | CA$10.99 |
Atlas 50005449 - N Scale NSC 5277 50Ft Plug-Door Boxcar - Canadian National CNIS #413039
N Scale NSC 5277 50Ft Plug-Door Boxcar - Canadian National CNIS #413039
| Price: | CA$26.99 |
Tangent Scale Models HO 60028-01 ICC I-18 Steel Bay Window Caboose, Chessie System (B&O) #C-3034
Tangent Scale Models HOICC I-18 Steel Bay Window Caboose, Chessie System (B&O)
| Price: | CA$144.99 |
Otter Valley Railroad 60053 - HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21173
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21173
| Price: | CA$69.99 |
Athearn Genesis G78361 - HO CA-8 Early Caboose w/Lights w/DCC & Sound - Union Pacific #25578
HO CA-8 Early Caboose w/Lights w/DCC & Sound - Union Pacific #25578
| Price: | CA$173.99 |
Otter Valley Railroad 64113 - HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23074
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23074
| Price: | CA$64.99 |
Micro Trains 02500227 - N Scale 50Ft Boxcar - GATX (BKTY) #151172
N Scale 50Ft Boxcar - GATX (BKTY) #151172
| Price: | CA$32.99 |
Kato Unitrack 20890 - N Scale CV-1 Compact Oval Set
N Scale CV-1 Compact Oval Set
| Price: | CA$31.99 |
Rapido 169007 - HO AutoFlood III RD Coal Hopper - CEFX (6pk) #3
HO AutoFlood III RD Coal Hopper - CEFX (6pk) #3
| Price: | CA$395.99 |
Tangent Scale Models HO 25046-07 Detroit, Toledo & Ironton (DTI) -Delivery 1970 Magenta- Greenville 86ft Double Plug Door Box Car #26841
Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
| Price: | CA$73.99 |
WalthersMainline HO 56635 34ft 100 Ton 2 Bay Hopper - Wisconsin Central #34047
HO 34ft 100 Ton 2 Bay Hopper - Wisconsin Central
| Price: | CA$35.99 |
Microscale 87645 - HO Waterslide Decals - Cargill 50ft Freight/Tank Cars - Corn Syrup
HO Waterslide Decals - Cargill 50ft Freight/Tank Cars - Corn Syrup
| Price: | CA$8.99 |
Rapido 169014 - HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1757
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1757
| Price: | CA$66.99 |
Axial 6T1 - 1/24 Scale - SCX24 RTR 2021 Ford Bronco 4WD Truck Brushed - Red
1/24 Scale - SCX24 RTR 2021 Ford Bronco 4WD Truck Brushed - Red
| Price: | CA$206.99 |
Walthers Cornerstone 4554 - HO Steel Railroad Bridge Tower - Kit
HO Steel Railroad Bridge Tower - Kit
| Price: | CA$25.99 |
Caboose Industries 204 - HO Operating Ground Throw Kit - High Level Switch Stand .190inch Travel Sprung w/Lantern & Targets
HO Operating Ground Throw Kit - High Level Switch Stand .190inch Travel Sprung w/Lantern & Targets
| Price: | CA$8.99 |
Walthers SceneMaster 3165 - HO Wrapped Lumber Load for 72ft Centerbeam Flatcar - Nascor
HO Wrapped Lumber Load for 72ft Centerbeam Flatcar - Nascor
| Price: | CA$15.99 |
Columbia Valley Model 187 HO Scale - 1940s - 1950s Gas Pumps - Unpainted - pkg(2)
1940s - 1950s Gas Pumps - Unpainted - pkg(2)
| Price: | CA$10.99 |
Microscale 90122 - HO Stencil Railroad Roman - Alphabet & Numbers - Black - Waterslide Decals
HO Stencil Railroad Roman - Alphabet & Numbers - Black - Waterslide Decals
| Price: | CA$7.99 |
InterMountain 45280-04 HO - Bi-Level Auto Racks - BNSF Rack & Flat Car - Circle Logo #300309
Bi-Level Auto Racks - BNSF Rack & Flat Car - Circle Logo #300309
| Price: | CA$99.99 |
Athearn Genesis G74521 - HO MP15AC - DCC Ready - Lake State Railway #1501
HO MP15AC - DCC Ready - Lake State Railway #1501
| Price: | CA$265.99 |
Athearn Genesis G70554 - HO SD75M Diesel, DCC Ready, PRLX ex Warbonnet #238
PRLX ex Warbonnet #238
| Price: | CA$252.99 |
Microscale TF-7 - Trim Film - Blue 4.5 in x 7.5 inch sheet - Waterslide Decal
Trim Film - Blue 4.5 in x 7.5 inch sheet - Waterslide Decal
| Price: | CA$6.49 |
JL Innovative 509 - HO Industrial/Commercial Detail Set
HO Industrial/Commercial Detail Set
| Price: | CA$15.99 |
Woodland Scenics 5042 - HO Built-&-Ready Landmark Structures - Old Windmill
Built-&-Ready Landmark Structures - Old Windmill
| Price: | CA$26.99 |
Athearn Genesis G78362 - HO CA-8 Early Caboose w/Lights w/DCC & Sound - Union Pacific #25511
HO CA-8 Early Caboose w/Lights w/DCC & Sound - Union Pacific #25511
| Price: | CA$173.99 |
Walthers Mainline 3021 - HO 60ft Hi-Cube Plate F Boxcar - Trailer Train TBOX #661025
HO 60ft Hi-Cube Plate F Boxcar - Trailer Train TBOX #661025
| Price: | CA$36.99 |
Kadee 1710 Roundhead Stainless Steel Screws 2-56 x 5/8 inch- 12pcs
#1710 Roundhead Stainless Steel Screws 2-56 x 5/8 inch- 12pcs
| Price: | CA$5.99 |
Tamiya Paints 85060 - Spray Can - Pearl Green (100mL)
Spray Can - Pearl Green (100mL)
| Price: | CA$7.99 |
Walthers Tools & Screws 74 - Drill Bit #74 - 0.0225inch Diameter (2 pkg)
Drill Bit #74 - 0.0225inch Diameter (2 pkg)
| Price: | CA$3.99 |
InterMountain 45280-03 HO - Bi-Level Auto Racks - BNSF Rack & Flat Car - Circle Logo #300292
Bi-Level Auto Racks - BNSF Rack & Flat Car - Circle Logo #300292
| Price: | CA$99.99 |
Athearn Genesis 67941 - HO 486 Series - TankTrain Intermediate - GATX/Black Small #28235
HO 486 Series - TankTrain Intermediate - GATX/Black Small #28235
| Price: | CA$75.99 |
Intermountain 453125-05 HO - 4750 Cubic Foot Rib-Sided - 3-Bay Covered Hopper - Illionois Central - #765858
HO - 4750 Cubic Foot Rib-Sided - 3-Bay Covered Hopper - Illinois Central - #765858
| Price: | CA$48.99 |
Athearn 140-7643 HO - 40ft Ribbed 3-bay Ballast Hopper - New York Central - #1 - 4pack
Athearn HO - 40ft Ribbed 3-bay Ballast Hopper - New York Central- #1 - 4pack
| Price: | CA$163.99 |
Rapido 403003 - HO 35Ft Fruehauf Integral-Post Volume Van - Boston & Maine #10264
HO 35Ft Fruehauf Integral-Post Volume Van - Boston & Maine #10264
| Price: | CA$30.99 |
Blair Line 125 - HO Laser-Cut 2-Lane Curved Wood Grade Crossing - 14-16in Radius (2)
HO Laser-Cut 2-Lane Curved Wood Grade Crossing - 14-16in Radius (2)
| Price: | CA$5.99 |
Intermountain 47053-17 - HO RTR ACF 4650 3-Bay Hopper - Norfolk Southern #251122
HO RTR ACF 4650 3-Bay Hopper - Norfolk Southern #251122
| Price: | CA$47.99 |
Tamiya Paints 85005 - Spray Can - Olive Drab (100mL)
Spray Can - Olive Drab (100mL)
| Price: | CA$7.99 |
Downtown Deco N Scale - Addams Avenue Part Three - Kit
Downtown Deco N Scale - Addams Avenue Part Three - Kit
2 5/8Inch X 2 3/4Inch
| Price: | CA$42.99 |
Walthers SceneMaster 12102 HO - Morgan Olson Route Star Van - USPS
Morgan Olson Route Star Van - USPS
| Price: | CA$23.99 |
Rapido 133010-5 - HO ACF PD3500 Flexi Flo Hopper - Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990 No. 897878
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990 No. 897878
| Price: | CA$60.99 |
Tamiya Paints 85090 - Spray Can - Brown JGSDF (100mL)
Spray Can - Brown JGSDF (100mL)
| Price: | CA$12.99 |
Walthers Proto 110111 HO Jordan Spreader Chicago & North Western C&NW #11967
Chicago & North Western(TM) #11967 (yellow, green; Employee Owned Logo) - Ready to Run
| Price: | CA$104.99 |
Athearn 92687 - HO RTR 60Ft Flatcar - SOO Line #5531
HO RTR 60Ft Flatcar - SOO Line #5531
| Price: | CA$41.99 |
Rapido 40538 - HO EMD GP40 - DCC & Sound - Western Pacific (Zephyr) #3514
HO EMD GP40 - DCC & Sound - Western Pacific (Zephyr) #3514
| Price: | CA$322.99 |
Rapido 142014-5- HO USRA Single-Sheathed Boxcar: RF&P #2694
HO USRA Single-Sheathed Boxcar: RF&P
| Price: | CA$47.99 |
Bowser 25404 - HO GMD SD40-2W - DCC & Sound - CNNA (Non Dynamic Map/ Oper. Strobe Lites) #5362
HO GMD SD40-2W - DCC & Sound - CNNA (Non Dynamic Map/ Oper. Strobe Lites) #5362
| Price: | CA$339.99 |
Walthers 110 Controls - All Scale - 2-Amp 12-Volt Filtered DC Power Supply - Walthers Layout Control System
2-Amp 12-Volt Filtered DC Power Supply - Walthers Layout Control System
| Price: | CA$23.99 |
Tangent Scale Models HO 25517-03 Greenville 86ft Boxcar CSX -Repaint 1991- #179314
Tangent Scale Models HO Greenville 86ft Boxcar CSX
| Price: | CA$68.99 |
Plastruct 90273 - 1/8In Fluorescent Red Rod (7pcs)
1/8In Fluorescent Red Rod (7pcs)
| Price: | CA$10.99 |
Otter Valley Railroad 64039 - HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16198
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16198
| Price: | CA$64.99 |
Rapido 138019-3 - HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Early Yellow) #475264
HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Early Yellow) #475264
| Price: | CA$84.99 |
Blair Line 155 - HO Storefront Signs - Industrial & Manufacturing
HO Storefront Signs - Industrial & Manufacturing
| Price: | CA$5.99 |
Athearn RTR 15519 - HO 45ft Trailer - Fredrickson #327
HO 45ft Trailer - Fredrickson #327
| Price: | CA$31.99 |
Rapido 403074 - HO 26Ft Can-Car Dry-Van Trailer - CP Express #7538
HO 26Ft Can-Car Dry-Van Trailer - CP Express #7538
| Price: | CA$31.99 |
Otter Valley Railroad 60002 - HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20016
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20016
| Price: | CA$69.99 |
K&S Engineering 815036 All Scale - 3/64 inch OD Round Brass Tube - 0.006inch Thick x 12inch Long (2 pkg)
3/64 inch OD Round Brass Tube - 0.006inch Thick x 12inch Long (2 pkg)
| Price: | CA$2.99 |
Rapido Trains 50056-1 - HO 52Ft 6In Mill Gondola: TH&B - Delivery Scheme #2450
HO 52Ft 6In Mill Gondola: TH&B - Delivery Scheme #2450
| Price: | CA$52.99 |
Rapido 169014 - HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1788
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1788
| Price: | CA$66.99 |
Rapido 142009-1- HO USRA Single-Sheathed Boxcar: N&W #40021
HO USRA Single-Sheathed Boxcar: N&W
| Price: | CA$47.99 |
Zona Tools 36105 - Precision Oiler
Precision Oiler
| Price: | CA$6.99 |
Atlas 519 HO - Code 83 Rerailers (3/pkg)
Code 83 Rerailers (3/pkg)
| Price: | CA$11.99 |
Walthers Mainline 5518 - HO 85ft General American G85 Flatcar - GTTX (Brown) #300391
HO 85ft General American G85 Flatcar - GTTX (Brown) #300391
| Price: | CA$35.99 |
Athearn RTR 81582 - HO FMC 4700 Covered Hopper - NAHX (3pk)
HO FMC 4700 Covered Hopper - NAHX (3pk)
| Price: | CA$134.99 |
Athearn Genesis G1257 - HO EMD GP7 - DCC & Sound - Erie Lackawanna EL #1207
HO EMD GP7 - DCC & Sound - Erie Lackawanna EL #1207
| Price: | CA$363.99 |
Walthers Mainline 45003 - HO 40ft ACF Modernized Welded Boxcar - Erie Lackawanna #88225
HO 40ft ACF Modernized Welded Boxcar - Erie Lackawanna #88225
| Price: | CA$33.99 |
Labelle Industries 105 - Track Conditioner with Pads - 1/2oz
Track Conditioner with Pads - 1/2oz
| Price: | CA$12.99 |
Tangent Scale Models HO 29012-06 -Delivery 1969 - Gunderson 6089 50ft BoxCar D&RGW #62021
Tangent Scale Models Delivery 1969 - Gunderson 6089 50ft BoxCar D&RGW
| Price: | CA$73.99 |
Athearn RTR 81586 - HO FMC 4700 Covered Hopper - UNPX #121022
HO FMC 4700 Covered Hopper - UNPX #121022
| Price: | CA$53.99 |
Rapido 083601 - HO EMD F40PH - DCC/Sound - Amtrak (Phase II) #284
HO EMD F40PH - DCC/Sound - Amtrak (Phase II) #284
| Price: | CA$304.99 |
Otter Valley Railroad 57019 - PSC Transfer Van - Canadian National #76555
PSC Transfer Van - Canadian National #76555
| Price: | CA$139.99 |
ESU 58210 LokSound 5 Fx DCC/MM/SX/M4 Blank Decoder. 8 Pin NEM652 with Speaker
LokSound V5 DCC8 Pin NEM652
| Price: | CA$88.99 |
Atlas 20006479 - HO 73Ft Center Partition Car - Norfolk Southern #120391
HO 73Ft Center Partition Car - Norfolk Southern #120391
| Price: | CA$48.99 |
Rapido 157003 - HO 5820 Covered Hopper - Procor/UNPX (Union Carbide) #122026
HO 5820 Covered Hopper - Procor/UNPX (Union Carbide) #122026
| Price: | CA$54.99 |
Woodland Scenics 1395 - Ballast - Coarse Gray Blend - Shaker (57.7 in3)
Ballast - Coarse Gray Blend - Shaker (57.7 in3)
| Price: | CA$15.99 |
Peco PSG-601 - 6mm Static Grass - Spring Grass (20g)
6mm Static Grass - Spring Grass (20g)
| Price: | CA$7.99 |
Otter Valley Railroad 6000-6 - N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX (6 pkg) #6
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX (6 pkg) 6
| Price: | CA$259.99 |
Otter Valley Railroad 66005 - HO NSC 60ft Ingot Flat Car - RTAX Liberty Railway Services #19030
HO NSC 60ft Ingot Flat Car - RTAX
THE LOAD IS INCLUDED!
| Price: | CA$69.99 |
Atlas Model Railroad 576 HO Code 83 Crossing - Nickel Silver w/Brown Ties - 60 Degrees
Code 83 Crossing - Nickel Silver w/Brown Ties - 60 Degrees
| Price: | CA$12.99 |
Athearn Genesis G37997 - HO 20K Gallon Acid Tank Car - GATX #29015
HO 20K Gallon Acid Tank Car - GATX #29015
| Price: | CA$59.99 |
Atlas 40005397 - N Scale FM H-24-66 Phase 2 Trainmaster - Silver Standard DC - Canadian Pacific (Late) #8917
N Scale FM H-24-66 Phase 2 Trainmaster - Silver Standard DC - Canadian Pacific (Late) #8917
| Price: | CA$142.99 |
Microscale 601513 - N Scale Railroad Decal Set - Canadian Pacific Modern Boxcars 1970+
N Scale Railroad Decal Set - Canadian Pacific Modern Boxcars 1970+
| Price: | CA$6.99 |
Rapido 127026-6 - HO MIL 3800 Covered Hopper - CP (Delivery Scheme) #382676
HO MIL 3800 Covered Hopper - CP (Delivery Scheme) #382676
| Price: | CA$54.99 |
Walthers Cornerstone 3487 - HO Vintage Motor Hotel with Office and Restaurant - Kit
Vintage Motor Hotel with Office and Restaurant - Kit
| Price: | CA$76.99 |
Walthers Proto 106156 - HO 55Ft Evans 4780 Covered Hopper - Boston & Maine #5412
HO 55Ft Evans 4780 Covered Hopper - Boston & Maine #5412
| Price: | CA$40.99 |
Intermountain 45828-11 HO Scale - 10Ft 6In Modified 1937 AAR Boxcar - Gulf, Mobile & Ohio #53015
10Ft 6In Modified 1937 AAR Boxcar - Gulf, Mobile & Ohio #53015
| Price: | CA$41.99 |
Otter Valley Railroad 60052 - HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21125
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21125
| Price: | CA$69.99 |
Walthers SceneMaster 3195 - HO Glass-Fiber Style Cushion Coil-Car Hood - Kit (2pk)
HO Glass-Fiber Style Cushion Coil-Car Hood - Kit (2pk)
| Price: | CA$15.99 |
InterMountain Railway 4400002-08 - HO Value Line RTR - 13 Panel Coalporter - Conrail Quality #505321
HO Value Line RTR - 13 Panel Coalporter - Conrail Quality #505321
| Price: | CA$37.99 |
Atlas Trainman 20005893 HO 2 Bay Offset Hopper with Flat Ends- Ready to Run- Canadian Pacific- Script lettering #357017
HO 2 Bay Off set Hopper with Flat Ends Canadian Pacific
| Price: | CA$25.99 |
Woodland Scenics 5053 - HO Built-&-Ready Landmark Structures - Dugans Paint Store
Built-&-Ready Landmark Structures - Dugans Paint Store
| Price: | CA$87.99 |
Otter Valley Railroad 64079 - HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140007
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140007
| Price: | CA$64.99 |
Walthers Mainline 6456 - HO 68Ft Railgon Gondola - Southern Pacific #365190
HO 68Ft Railgon Gondola - Southern Pacific #365190
| Price: | CA$34.99 |
Woodland Scenics 135 Underbrush - Light Green - 25.2 cu in - (412 cu cm)
Light Green
| Price: | CA$7.99 |
K&S Engineering 83043 All Scale - 12inch Long Round Aluminum Rod - 1/8 inch Diameter
12inch Long Round Aluminum Rod - 1/8 inch Diameter
| Price: | CA$1.99 |
Rapido 27567 - HO EMD SW9 - DCC & Sound - Boston & Maine (B&M As Delivered) #1224
HO EMD SW9 - DCC & Sound - Boston & Maine (B&M As Delivered) #1224
| Price: | CA$319.99 |
Walthers SceneMaster 4189 - HO Parking Meters (20/pkg)
HO Parking Meters (20/pkg)
| Price: | CA$10.99 |
Athearn Genesis G70676 HO - G2 SD70M-2 - DCC & Sound - FEC #106
G2 SD70M-2 - DCC & Sound - FEC #106
| Price: | CA$372.99 |
Bowser 60522 - HO Scale SD30C-ECO - DCC & Sound - Canadian Pacific #5038
HO Scale SD30C-ECO - DCC & Sound - Canadian Pacific #5038
| Price: | CA$347.99 |
Otter Valley Railroad 60041 - HO NSC 64 Ft 6000 Cubic Gondola HS - XRMX #2202
HO NSC 64 Ft 6000 Cubic Gondola HS - XRMX #2202
| Price: | CA$69.99 |
Rapido 151002-3 - HO Vancouver Iron Works Piggyback Flatcar - Canadian National #688109
HO Vancouver Iron Works Piggyback Flatcar - Canadian National #688109
| Price: | CA$55.99 |
Otter Valley Railroad 6485- N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15110
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15110
| Price: | CA$43.99 |
Oxford Diecast 87DD69001 - HO 1969 Dodge Charger Daytona
HO 1969 Dodge Charger Daytona
| Price: | CA$15.99 |
Bowser 42929 - HO 70-Ton 12-Panel Hopper - Pennsylvania (H39 Bethlehem Blt.) #667232
HO 70-Ton 12-Panel Hopper - Pennsylvania (H39 Bethlehem Blt.) #667232
| Price: | CA$29.99 |
Walthers Mainline 5871 - HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian Pacific #304661
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian Pacific #304661
| Price: | CA$38.99 |
Peco SL88 - HO Code 100 Insulfrog Large Radius Turnout - Right Hand
HO Code 100 Insulfrog Large Radius Turnout - Right Hand
| Price: | CA$28.99 |
Rix Products 112 - HO Modern 50Ft Highway Overpass - with Pier
HO Modern 50Ft Highway Overpass - with Pier
| Price: | CA$17.99 |
Atlas 10003865 - HO MP15DC Gold - DCC & Sound w/ Ditch Lights - LTEX #1502
HO MP15DC Gold - DCC & Sound w/ Ditch Lights - LTEX #1502
| Price: | CA$279.99 |
Walthers Mainline 20667 - HO EMD SW7 - DCC & Sound - Conrail #8905
HO EMD SW7 - DCC & Sound - Conrail #8905
| Price: | CA$226.99 |
Athearn Genesis 67943 - HO 486 Series - TankTrain Intermediate - GATX/Black Small #28237
HO 486 Series - TankTrain Intermediate - GATX/Black Small #28237
| Price: | CA$75.99 |
Athearn Genesis G82717 - HO EMD GP7 - DCC & Sound - Maine Central MEC #564
HO EMD GP7 - DCC & Sound - Maine Central MEC #564
| Price: | CA$368.99 |
Woodland Scenics 1406 - SubTerrain System - Foam Risers (1/2in)
SubTerrain System - Foam Risers (1/2in)
| Price: | CA$11.99 |
Athearn Genesis G78360 - HO CA-8 Early Caboose w/Lights w/DCC & Sound - Union Pacific #25576
HO CA-8 Early Caboose w/Lights w/DCC & Sound - Union Pacific #25576
| Price: | CA$173.99 |
Rapido 37008 - HO Alco FA-1 & FB-1 Set - DCC Ready - Canadian Pacific (Block Scheme) #4026, 4415
HO Alco FA-1 & FB-1 Set - DCC Ready - Canadian Pacific (Block Scheme) #4026, 4415
| Price: | CA$414.99 |
Athearn Genesis G64839 - HO GP40-2 - DCC Ready - ONT #2201
HO GP40-2 - DCC Ready - ONT #2201
| Price: | CA$265.99 |
Athearn Roundhouse 1711 HO - 50ft Ext Post High Cube Plug Door Box - Wisconsin Central #1739
50ft Ext Post High Cube Plug Door Box - Wisconsin Central #1739
| Price: | CA$29.99 |
Rapido 198009-3 HO PC&F 5241 CUFT - Boxcar - BKTY Patch 1 (UP) - Single Car #153411
HO PC&F 5241 CUFT - Boxcar - BKTY Patch 1 (UP) - Single Car #153411
| Price: | CA$54.99 |
Rapido 38013 - HO Scale GP38 - DC/DCC Ready - Southern (High Nose) #2754
HO Scale GP38 - DC/DCC Ready - Southern (High Nose) #2754
| Price: | CA$228.99 |
Athearn Genesis G73024 - HO 50ft PC&F, 8ft & 6ft Boxcar - SSW/GWS #27377
HO 50ft PC&F, 8ft & 6ft Boxcar - SSW/GWS #27377
| Price: | CA$54.99 |
InterMountain Railway 4400005-07 - HO Value Line RTR - 13 Panel Coalporter - NYC (Conrail Quality) #505804
HO Value Line RTR - 13 Panel Coalporter - NYC (Conrail Quality) #505804
| Price: | CA$37.99 |
Woodland Scenics 1586 All Scale Evergreen Tree Value Pack - Ready Made Trees - Fir
Fir 4 - 6inch 10 - 15cm Tall pkg(13
| Price: | CA$43.99 |
Walthers Cornerstone 3122 - HO MI-JACK Translift(R) Intermodal Crane - Kit
HO MI-JACK Translift(R) Intermodal Crane - Kit
| Price: | CA$37.99 |
Athearn 97380 HO Scale - RTR 52Ft Mill Gondola, TFM #60047
RTR 52Ft Mill Gondola, TFM #60047
| Price: | CA$34.99 |
Bowser HO 50Ft 2 Door Boxcar Reading No 19206
Bowser HO 50Ft 2 Door Boxcar Reading No 19206
| Price: | CA$24.99 |
Rapido 147099 - HO 66ft Bulkhead Flatcar - Undecorated National Steel Car
HO 66ft Bulkhead Flatcar - Undecorated National Steel Car
| Price: | CA$47.99 |
Evergreen Scale Models 142 Opaque White Polystyrene Strips 14in .04x.04 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.04 (10pcs pkg)
| Price: | CA$4.49 |
Athearn RND88177 - HO 50ft Waffle HC Plug Door Boxcar - SCL #90947
HO 50ft Waffle HC Plug Door Boxcar - SCL #90947
| Price: | CA$38.99 |
Woodland Scenics 1286 - Gravel - Gray Fine
Gravel - Gray Fine
| Price: | CA$7.99 |
Rapido 142010-6- HO USRA Single-Sheathed Boxcar: NYC #277907
HO USRA Single-Sheathed Boxcar: NYC
| Price: | CA$47.99 |
Rapido 123005-B HO Scale - PRR X31A Single-Door Boxcar: Plain Keystone - Single Car #70008
PRR X31A Single-Door Boxcar: Plain Keystone - Single Car #70008
| Price: | CA$51.99 |
Rapido 603010 - HO H-6-D - DC/Silent - Canadian National Railway (Straight Wafer) #1330
HO H-6-D - DC/Silent - Canadian National Railway (Straight Wafer) #1330
| Price: | CA$424.99 |
Walthers Proto 42725 - HO EMD GP9 Phase II - DCC & Sound - Undecorated
HO EMD GP9 Phase II - DCC & Sound - Undecorated
| Price: | CA$348.99 |
Evergreen Scale Models 8112 - Opaque White Polystyrene HO Scale Strips (1x12) .011In x .135In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x12) .011In x .135In x 14In (10 pcs pkg)
| Price: | CA$4.49 |
Athearn Genesis G13336 - HO EMD GP15T Diesel - DCC & Sound - CSX #1518
HO EMD GP15T Diesel - DCC & Sound - CSX #1518
| Price: | CA$349.99 |
Sylvan Scale Models V307 - 1940-49 REO Speedwagon - Unpainted and Resin Cast Kit
1940-49 REO Speedwagon - Unpainted and Resin Cast Kit
| Price: | CA$19.99 |
ESU 58513 LokSound 5 XL DCC MM SX-M4 Multi Prototcol Sound and Control Decoder
4A for G Scale, Screw Terminals, No Recorded Sound Files
| Price: | CA$274.99 |
Rapido 42506 - HO GE C30-7 - DCC & Sound - Burlington Northern (Early Scheme) #5526
HO GE C30-7 - DCC & Sound - Burlington Northern (Early Scheme) #5526
| Price: | CA$315.99 |
Athearn 6621 - N Scale 52Ft Mill Gondola - C&O Railgon #351342
N Scale 52Ft Mill Gondola - C&O Railgon #351342
| Price: | CA$41.99 |
Walthers Mainline 5390 - HO 60ft PS Flatcar - Burlington Northern #630844
HO 60ft PS Flatcar - Burlington Northern #630844
| Price: | CA$38.99 |
Rapido Trains 203507 - HO UAC TurboTrain (DC/DCC/Sound): VIA #2 - 5 Car Set
HO UAC TurboTrain (DC/DCC/Sound): VIA #2 - 5 Car Set
| Price: | CA$849.99 |
Walthers Proto 2102 HO GSC 41-HR Metal Passenger Trucks w/36in Metal Wheels -- Black - 1 Pair
HO GSC 41-HR Metal Passenger Trucks w/36in Metal Wheels
| Price: | CA$15.99 |
InterMountain RR 32524-30 HO Red Caboose Evans 100 Ton Coil Car - Chicago & North Western #39641
Chicago & North Western #39641
| Price: | CA$43.99 |
Athearn RND1514 - HO 50ft Ext-Post Hi-Cube Plug Boxcar - Columbia & Cowlitz #3037
HO 50ft Ext-Post Hi-Cube Plug Boxcar - Columbia & Cowlitz #3037
| Price: | CA$38.99 |
Tru Color Paint 010 - Acrylic - Black - 1oz
Tru Color Paint 010 - Acrylic - Black - 1oz
| Price: | CA$7.99 |
Woodland Scenics 5677 HO Concrete Lamp Post - Just Plug(TM) package of 3
Concrete Lamp Post - Just Plug(TM) package of 3
| Price: | CA$25.99 |
Walthers SceneMaster 8539 - HO 53ft Singamas Corrugated-Side Container - TMX Intermodal
HO 53ft Singamas Corrugated-Side Container - TMX Intermodal
| Price: | CA$15.99 |
Tangent 25043-04 - HO Greenville 86Ft Double Plug Door Box Car - CSXT (Boxcar Scheme 2019+) #180844
HO Greenville 86Ft Double Plug Door Box Car - CSXT (Boxcar Scheme 2019+) #180844
| Price: | CA$76.99 |
Detail Associates 1202 - HO EMD Underframe Mount Bells (2pk)
HO EMD Underframe Mount Bells (2pk)
| Price: | CA$4.99 |
Walthers Cornerstone 3043 - HO Steel Water Tank - Kit
HO Steel Water Tank - Kit
| Price: | CA$31.99 |
Atlas 532 - HO Code 83 Curved Snap Track - 18 Inch Radius (6/pkg)
HO Code 83 Curved Snap Track - 18 Inch Radius (6/pkg)
| Price: | CA$11.99 |
Rapido 181003-1 - HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Erie #79008
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Erie #79008
| Price: | CA$55.99 |
Rapido 178001-5 - HO H21A 4-Bay Hopper - K Brakes - Pennsylvania (PRR Red, Circle Keystone) #179378
HO H21A 4-Bay Hopper - K Brakes - Pennsylvania (PRR Red, Circle Keystone) #179378
| Price: | CA$55.99 |
HO 70 Ton 13 Panel 3-Bay Hopper Car - Pennsylvania (H37B w/ Crown Trucks) #272213
Ready to Run.
Features:
Crisp details and sharp painting and printing,
metal wheels and knuckle couplers
1st time offered with the correct Trucks N Scale Horizon Fleet Dinette - Amtrak Phase III Wide #53504
Super-detailed, as is Tradition
Rapido brings their experience with passenger car models to this long warranted fleet of cars used for intercity travel across America (and even into Canada). The Rapido cars will feature the same great attention to detail youve come to expect, including free-rolling wheels, detailed underbodies, interior lighting and more.
Coach, Dinette and Club Dinette cars available
Full underbody details unique to each car style
Full multi-color interior detail with separate seats
Folding steps or fixed stairs as appropriate
GSI G70 trucks with free-rolling, turned-metal wheelsets
Accurate painting and lettering
Constant interior lighting in DC and DCC
Working marker lights
Separately-applied metal grab irons HO RTR PS-2 2600 Covered Hopper - Grand Trunk Western (GTW) #111132
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track N Scale AutoFlood III RD Coal Hopper - UP/CMO #504337
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
FEATURES:
- One time run of these road numbers, order now - limited quantity available
- Prototypes seen from coast-to-coast 1974 to the present
- Handles all types of general freight loading
- Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
- 41ft 3in Truck Centers
- 15ft 2in Tall
- 10ft 8in Wide
- Fully assembled
- Correct 33in RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers Evergreen Scale Models Opaque White Polystyrene Strips 14in .125x.250 (5pcs pkg) HO Scale H1b Hudson Steam - DCC & Sound - Canadian Pacific (Delivery) #2816
-Early walkway w/smoke deflectors
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius HO RTR PS 4740 Covered Hopper - Norfolk & Western #176854
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Body-mounted McHenry operating scale knuckle couplers
36inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Multi-packs feature unique road numbers
Weighted for optimum performance
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Brown
Product Information
The LokSound by ESU Super Thin Wire is AWG 36, .5mm, 36AWG super flexible wire. It comes in a 30Ft 10m roll and is matched to common DCC colors. HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4557
8inch stripe w/out water expansion tank, w/ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder HO GE Dash 9-44CW - DC/DCC Ready - Canadian National CN #2510
CN FEATURES:
Canadian 4-window cab with high-mounted number boards
K3 horn
Front ditch lights
Front class lights
Rear single style headlight
Cab-mounted brass bell
Canadian National purchased 23 safety cab Dash 9 locomotives from GE in late 1994. Classed as -C44-9WL-, these locomotives were seen all over the system and featured a 4-window Canadian style cab, front and rear anticlimbers, and single rear headlight.
ROAD NUMBER SPECIFIC FEATURES:
#2506 Later appearance with right side yellow number board numbers and missing left side -American Continent- map art
#2510 As-delivered appearance
#2522 As-delivered appearance
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
Evergreen Scale Models 3025 .025in Opaque White Polystyrene Passenger Car Siding (1sheet) Evans X72A Box car: APASCO - GE Leasing - Single Car #6112
Detail Variations:
6-pack includes the following numbers:
#6005
#6040
#6077
#6112
#6122
#6150
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels HO Intermountain 4-Panel Coalporter, Canadian National
CNA Website scheme
Features:
Sharp Painting and Lettering
Prototype Accurate Paint Schemes
Multiple Road Numbers
InterMountain 100 Ton Trucks with 36in Metal Wheelsets
Metal Knuckle Couplers Tru Color Paint - Acrylic - Vermont Red - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). 2mm Static Grass - Summer Grass (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Minneapolis & St. Louis (M&StL Red) #54992
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme N Scale 100-Ton 3-Bay Ribside Open Hopper w/Tarps 4-Pack - (FOAM) - SOO Line
60839, 60853, 60867, 60899
Product Information
A coal train standard from the 1960s on, cars feature an injection-molded body, realistic load, fine paint and lettering and Magne-Matic(R) magnetic knuckle couplers. HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286320
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation N Scale Short Barrel Ore Hopper - Ontario Northland: Progressive Green #6524
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms Ballast - Fine Light Gray - Shaker (57.7 in3)
Use ballast and coal for any scale to model realistic railroad track, gravel roads, crushed rock and stones, hopper loads, and coal piles. Available in several colors and sizes, you can mix and match for a superior realistic effect. Ballast and coal are lightweight and easy to use. Watch the Woodland Scenics video about how to apply it and attach with scenic cement!
ALLERGY CAUTION: Ballast contains tree nut by-products. HO Champion Brake Wheels - Red Oxide (8pcs)
8 brake wheels for freight cars. Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.125 (10pcs pkg) HO RTR 53Ft Jindo Container - UPSU (3pkg) #2
MODEL FEATURES:
Newest vertical rib front
Easily stackable
Separately applied door closure rods
Fully assembled
Each container individually numbered
Razor sharp printing and painting
Like its locomotives, all of Amtrak?s rolling stock was inherited from predecessor railroads such as Penn Central. Since there wasn?t time enough to implement uniform branding on Amtrak?s fleet come May 1st, 1971, most trains were comprised of varied rolling stock from multiple railroads resulting in a colorful, or rainbow-like appearance. By 1972, Amtrak developed its Phase I livery and began repainting its fleet of heritage coaches, however due to the size and service demand of the fleet, this process took several years causing the ?rainbow era? to last well into the decade. HO RTR SD40T-2 - DCC Ready - D&RGW Rio Grande #5353
DRGW FEATURES:
81inch nose
Functioning nose light
Sinclair Antenna
Correct sized fuel tank
See-through lower air intakes
Snow plow
Ratchet style brake
Dual fuel fillers
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Separately applied air tanks
See through cab windows
Welded ECAFB
Photoetch windshield wipers
LED Lighting
HTC truck sideframes
All-wheel electrical pickup
See-through dynamic brake fans
-Mushroom- nose vent on right side
Separately applied wire grab irons
Fully assembled and ready-to-run
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox speific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body
Painted and printed for realistic decoration
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for troublefree operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Replacement parts available including motor brushes
Recommended radius: 22inch 0.025 inch Thick Brass Flat Sheet - 6x12inch
Brass Flat Sheet 6inch Wide x 12inch Long (1 pc)
15 x 30cm Flexible Vinyl Stone Wall Arches - Style 1 - Small Arches
DIMENSIONS:
6 Small & 5 Medium: 2-1/2in & 4-5/8in 6.3 & 11.7cm
Product Information
Add realistic detail to HO structures with this set of Stone Wall Arches from Chooch Enterprises. Molded in flexible vinyl thats easy to cut with scissors or hobby knife, they can be finished with acrylic paints (sold separately) for added realism. HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Orange) #506416
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012. Brass Strip - 12inch x 3/4inch x .032inch
Length: 12inch
Width: 3/4inch
Thickness:0.032inch HO Scenic Accents - Firemen to the Rescue (8pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
A set of firemen, a little girl, a dog, cat and a ladder. One fireman cares for the little girl, one fireman is signaling above his head, one fireman is standing, watching another fireman on a ladder rescue a treed kitty. HO USRA Composite Drop-Bottom Gondola -Ready to Run- Michigan Central #12217
Date: BLT 8-19
All are Ready-to-Run
-Laser Cut Wood Sides and Floor
-Laser Sharp Painting and Printing
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch HO USRA Composite Drop-Bottom Gondola -Ready to Run- Michigan Central #12031
Date: BLT 8-19
All are Ready-to-Run
-Laser Cut Wood Sides and Floor
-Laser Sharp Painting and Printing
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch HO 55Ft Evans 4780 Covered Hopper - ADM (UELX) #30248
(Yellow molecule logo)
Product Information
Expand grain traffic along your HO railroad with a fleet of WalthersProto 55ft Evans 4780 Covered Hoppers! Introduced in 1977 and still going strong today, they can be found handling all types of grains and dried distillers grains used for animal feed. Fully assembled and ready for service, features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint and lettering
Ultra-smooth rolling 36inch RP-25 turned wheelsets
Proto MAX(TM) metal knuckle couplers HO Scale - 1937 Studebaker COE Gasoline Tank Truck - Unpainted and Resin Cast Kit HO MP15DC Gold - DCC & Sound w/ Ditch Lights - Norfolk Southern #2372
Features:
Three different hood styles (angled air filter box, square air filter box, standard hood)
Exhaust stacks: with or without muffler
Long hood sand fill: recessed or extended
Rear sand fill: Three variations of sand boxes behind cab
Pilot: standard or with snow plow
Additional Features:
Separately-applied scale detail parts include: windshield wipers, metal grab irons, coupler cut levers, multiple-unit hoses, snow plow, train line hoses, fine scale handrails, and more!
See through step detail on sill
Etched metal radiator grilles
Painted crew members
Factory-equipped with AccuMate knuckle couplers
Coupler pocket designed to accept AccuMate Proto-couplers
Five-pole skewed armature motor w/ dual flywheels for optimum performance at all speeds
Directional lighting with golden-white LEDs
Atlas Master Series Gold Features:
ESU LokSound decoder, supporting all DCC programming modes.
Flexible mapping of function keys F0 to F31.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor and more. HO SD38 - DCC Ready - Conrail (NS) #3805
ROAD NUMBER SPECIFIC FEATURES:
#3805
- White patch with black numbers
- faded paint effect
- triple clasp brakes
- large fuel tank
- rear mounted Leslie 3 chime horn
- front ditch lights
- angled cab roof antenna
- Prime A/C
- small EMD plow
#3818
- Black patch with white numbers
- faded paint effect
- triple clasp brakes
- large fuel tank
- rear mounted Leslie 3 chime horn
- front ditch lights
- cab roof antenna
- Prime A/C
- no plow
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO Code 83 Plastic Insulating Rail Joiners (24pcs)
Use Atlas HO Scale Code 83 Plastic Insulating Rail Joiners to join and electrically isolate sections of track. Joiners will work with any brand of Code 83 rail! HO GP50 - DCC & Sound - Norfolk Southern #7054
Detailed Information
NS FEATURES:
Phase I Body with rounded blower housing
Long hood forward setup with high short hood
Southern style 5-chime horns on both ends
Long hood mounted bell
Dual Firecracker antennas
Timkin bearing trucks
Hood mounted walkway lights (non-operational)
Large EMD style plows and ditch lights on both ends
Built in 1980 for the Southern Railway, these distinct high nose long hood forward locomotives were painted into Norfolk Southern colors after the Southern / Norfolk Western merger of 1982. They retained most of the as built features other than ditch lights added in the 1990s.
ROAD NUMBER SPECIFIC FEATURES:
#7037
Earlier NS scheme with dashed frame stripes
#7054
Newer NS -horse-head- logo with solid frame stripes
#7085
Earlier NS scheme with solid frame stripes
GP50 LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Walkway tread
Lift rings
Sander lines
Windshield wipers
McHenry scale knuckle couplers - Kadee compatible
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504977
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme. HO 48ft Galvanized Steel Stiffened Backdrop Grain Bin - Kit
(Narrow - 2.66 inch Corrugation)
(NOTE: this backdrop bin is not a full round bin - it is cut 4ft beyond halfway to simplify placing the bin against a flat backdrop while still allowing room for the walkways, conveyors, and other equipment at the top.)
Corrugated steel grain bins are a staple in any agricultural setting, placed on farms, elevators, industries, and beside railroad tracks. Used with a variety of farm commodities, these bins provide a safe, dry place to store that commodity until it goes to market.
With several styles to choose from, these grain bins will look right at home on your layout. They feature prototypical corrugations, realistic galvanized steel appearance, various side sheet heights, and a variety of diameters.
Narrow corrugation bins have corrugations spaced a scale 2.66 inches and the rings are 32 inches tall. Wide corrugation bins have corrugations spaced 4 inches apart with 44 inch tall rings.
All bins are easy to assemble - just stack the rings, glue them together, attach the roof and you are done! Every ring comes as one solid piece, so no time consuming and messy assembly of individual side sheet pieces to create each ring, saving you time and frustration!
What size bin will fit your space? Try our grain bin size calculator or printable template.
https://www.iascaled.com/store/GrainBinSizeCalculators
https://iascaled.com/docs/ho-bin/GBM-HO.pdf HO Greenville 86ft Double Plug Door Box Car - DT&I #26753
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Release Date: August 2020 (original), August 2021 (re-release with 4 new numbers)
DTI -Original 1971- is one scheme we could not resist choosing for our first run, and for good reason. The huge DT&I lettering and compass painted on a baby blue carbody screams early 1970s greatness. The -We have the connections- logo is true, with a return route to BN in Duluth MN! Typical of Greenville builder paint schemes, the doors are not painted but left bare aluminum. This car comes equipped with ACI label and a WK routing code hand painted on the side of the car, like the prototype. While the stenciling has significant lettering variation, the small details are specific to DT&I specs, including end of car cushioning, gypsum crossover platforms, and Universal brake housing. Ah, and look closely: We even have the correct (and all-new) 100-Ton Barber S-2-C -Low Profile- trucks with Timken bearings and truck mounted brake beams. Available in 4 numbers! Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Seaboard Air Line - Delivery #102
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover N Budd RDC-1 (Ph 2) - DC/DCC/Sound - CP Rail (Action Red)
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height HO Benches (8 pkg)
Product Information
Heres a must-have detail from SceneMaster(TM) that will bring HO Scale station platforms, city parks, bus stops and more to life in minutes! The set includes eight benches that are ready to install anywhere along your railroad. For the finsihing touch, add some SceneMaster Figures, available separately.
Please Note: Figure shown in photo is not included. HO Delivery Target Red 1953+ Steel Bay Window Caboose - Illinois Terminal #980
Product: St. Louis Car Co. Illinois Terminal Steel Bay Window Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Gould plain-bearing trucks with separate brake beam part
Wheels: CNC-machined standard RP25 .110inch tread 33inch wheels
DC/DCC Lighting Features: Interior Lights
Illinois Terminal (ITC) -Delivery Target Red 1953+- is the first of three different Illinois Terminal schemes we are offering in our first production run of St. Louis Car Company cabooses. These cars feature a safety-inspired bright -target- red paint. The caboose also has other colors present on the exterior, including -canary yellow- handrails and steps. Additionally, the Standard Railway Equipment roof received a coat of light gray paint. The prototype Illinois Terminal lettering above the cupola and the ITC with road number was applied onto thin metal placards which were bolted onto the car side and had an off-white appearance, which we have replicated this -off-white- reflective color with our graphics. Similar to our NYC offerings, our models include large (unlit) oil lanterns on one end of the caboose. The fully-painted and apportioned interior for these models includes the two tone green scheme as found in the original cabooses. Check out those double bunks as you peek through the large windows. Our Illinois Terminal delivery scheme cabooses are available in two road numbers. B-100-40 Boxcar: Golden West - Ventura County - Single Car #140011
Detail Variations:
6-pack includes the following numbers:
#140000
#140003
#140008
#140011
#140013
#140016
Our B-100-40 model features the following details:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Genuine Kadee #158 Whisker couplers
Newly tooled trucks with turned metal 36 Inch wheels
Separate door rods and door tracks
Road number specific number patches
Separately applied coupler cut levers HO 1975 Cadillac Eldorado Convertible - Gold
This HO Scale 1975 Cadillac Eldorado Convertible from Brekina is based on the luxury automobile seen across North America. It was a popular car offered in sedan and convertible models. Spotting features of the 1975 include rectangular headlamps, an egg crate grille, full rear wheel openings sans fender skirts and sharper, crisper lines resulting in a sleeker appearance reminiscent of the 1967-1970 models. Only minor revisions appeared on the 1976 edition. This model features a detailed injection-molded plastic body with fine decoration, interior seats and window glazing and chrome-plated parts as appropriate. This model is ideal for your 1970s and later street scenes. Plastruct 90002 1/16in Angle HO EMD SD10 - DCC & Sound - Dakota, Minnesota & Eastern #548
Dakota Minnesota & Eastern --Conditional Announcement-
- Ex-SOO, nee-MILW units - same features
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more! HO 10 Inch Track Alignment Gauges - Curved - 38 Inch Radius
RibbonRail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking, and joining rail. Track Alignment Gauges are precision machined to NMRA standards and will work on any code of HO Scale rail. Available in many curve radii as well as straight. LokSound V5 DCC Micro 8-Pin Sound Decoder
(SPEAKER AND ENCLOSURE SOLD SEPARATELY!)
Note - If you want sound installed it the decoder, write the sound file number or the locomotive you are putting it into, in the customer comments section at the check out.
For Gauge: N, HO, & HOn3
21mm x 10mm (0.827 x 0.394 inch)
The LokSound 5 DCC Micro has an NMRA 8-pin Plug [via adapter Next18 to 8-Pin Plug] and can be plugged into a circuit board with an NMRA 8 pin female receptacle. With a footprint of 21mm x 10 mm it is one of the smallest full-featured sound decoders available. The V5 DCC Micro is also suitable for H0 locomotives where space is an issue. LokSound V5 DCC Micro decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types.
Consult your locomotive manual to determine the appropriate type of decoder.
Operating Modes:
The V5 decoder supports all DCC programming modes! There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.
The LokSound 5 decoder supports the Märklin® braking sections, ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. The locomotive with a LokSound 5 decoder will also come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.
The LokSound 5 decoder is suitable for analog DC operation, AC and DCC command control.
Sound:
The LokSound V5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and for all practical purposes, one cannot detect any difference to the original. A dual class D audio power amplifier with 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.
The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail movements. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your locomotives.
Functions:
Subject to the type of interface, every LokSound V5 Micro has at least 6 amplified outputs as well as one logic output with multiple lighting functions available. The brightness of each output may be adjusted separately.
Motor control:
The LokSound V5 Micro decoder supplies up to 0.75A motor current and motor control has been improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz results in silent operation, particularly for coreless motors making motor hum a thing of the past. Load control can now be adjusted with up to 10 separate CVs and will manage even the most difficult motor control issues. The unique Auto-Tune function facilitates the automatic calibration of the decoder to perfectly match the motor.
HO Hex Coupling Kit
Includes:
Couplings to connect 4 Hex Flywheels or do 2 locos!
Slide hex end on square shaft, cut to length, glue. Simple and easy! Hobos - 3 Unpainted Figures HO Hyundai 48ft Exterior Post - EMP #254545
PROTOTYPE TYPE:
48ft Exterior Post containers were introduced in 1986 and were a common site on nearly all double stack container trains of the later 80s, 90s, and 2000s. These containers were used for domestic freight service and were purchased by numerous railroads and freight operators in large numbers. These containers were a unique design in which the front and side container panels were supported by aluminum channel posts mounted outside of the container box to provide additional capacity space for larger pallet stacks within the container interior. The posts are a simple spotting feature for these styles of containers. Hyundai was one of a handful of manufacturers of exterior post containers, and while nearly-identical in design to one of their competitors, the additional drainage channel on the top of the container at the head end, and full-height end corner posts differentiate this container from its competitors design. Some of these containers served secondary lives for more than one operator, leading to some interesting graphic combinations over their lifespans. Changes to over-the-road length allowances for 53ft containers and trailers brought about the eventual demise of the 48ft container and a majority of them were withdrawn from service during the mid-2000s and beyond, though limited numbers still remain in service today.
FEATURES:
Hyundai Roof Configuration Version:
A unique feature of the Hyundai design was the additional water drainage channel near the front end of the container and the forward vertical framing members that extended the full height of the container. We have modeled the detail that differentiates this container from those of other manufacturers of 48ft exterior post containers.
Sharp And Accurate Paint And Lettering:
Classonemodelworks.com provides accurate paint and lettering taken from photographs of the prototype, and numbering that matches the class numbers for each operator or railroad. Our containers come with the exterior posts already painted to match the aluminum color of the prototype containers and galvanized coloring for the upper and lower structural channels.
Accurately Dimensioned:
These containers have been accurately reproduced from hand-measured field dimensions of the actual containers, right down to every visible detail. Classonemodelorks.com stands for accuracy and we strive to provide that with every model we produce.
Accurate scale Door latching Details:
Classonemodelworks.com believes in providing models that accurately depict the prototype equipment. Keeping that as our core, we are proud to provide highly-detailed cast door locking bars, latching mechanisms, door bumpers and angled bar lifter. Spray Can - Metallic Gold (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint. HO Chemical Tankcar - Procor (3pkg)
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Wireform safety handrails
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 15inch HO Horizon Club-Dinette - Amtrak (Phase lV) #58103
PHASE SPECIFIC FEATURES:
- Half dinette, half business-class seating
- Modified parlor end-doors
- Fixed end-door steps
GENERAL FEATURES:
- Coach, Dinette, Club-Dinette car body styles
- All-new ADA Coach cars
- All-new car numbers
- Full underbody and interior detail
- Correct GSI G70 trucks with metal wheelsets and reliable power pickup
- Accurate painting and lettering
- Tinted windows
- Improved interior lighting in both DC and DCC
- Independently-controllable end marker lights
- Metal side grab irons
HO 40Ft PS-1 Boxcar - ATSF (Bx57 Grand Canyon) #31740
Date: BLT 5-50
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch N Scale Scenic Accents(R) Figures -- Checker Players HO Operating Ground Throw - Sprung 0.190 inch Travel
Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw.
Molded on pin for direct mounting. Plastruct 91005 Gray ABS 0.060 (2pcs pkg)
Specifications In Inches:
Thickness: .060 (1.5mm)
Width: 7 (175mm)
Length: 12 (300mm)
HO Scale - 1966-77 GMC 9500 Low Mount Cab Tandem Axle Short Hood Tractor - Unpainted and Resin Cast Kit Norfolk Southern Locomotive Directory 2006-2007 148 pages, 6 x 9inch, softcover, 200+ photos, unit-by-unit listing of every unit on the NS roster on January 1, 2007.
HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) #742975
1935+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory. HO Jordan Spreader - Kit - Undecorated
Now you can add one of the most versatile machines every built to your maintenance-of-way fleet with the Walthers Proto Jordan Spreader! Used to profile and grade drainage ditches during warmer weather, when the flakes start flying, Jordans can be found plowing snow and pushing it back from the tracks. These HO replicas are based on the model 2-200 Spreader-Ditcher-Snowplow used by dozens of railroads, which have been in service year round since the 1920s. Featuring all-new tooling, the models are a perfect companion to the Walthers Proto Russell Snowplows (sold separately) and feature:
-Limited edition - one-time run of these numbers
-Factory-installed grab irons
-Positionable wings and moldboards can be raised and lowered
-Built tough with durable metal hinges and other details
-Complete underbody with brake gear and piping
-Thin profile stirrups
-Cab window glass
Railroad-specific details:
-Horizontal or vertical air reservoir
-Original or one of 3 later headlight styles as appropriate
-70-ton roller bearing or Bettendorf trucks as appropriate
-Single-chime air horn placement
-Ultra-smooth rolling metal axles and 33in wheelsets
-Proto MAX(TM) metal knuckle couplers
HO GE C30-7 - DCC Ready - CSX (YN2 Scheme) #7047
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s. Great Lakes Freighter Kit - Unpainted and Resin Cast
Our Great Lakes Freighter is patterned after a St. Lawrence canaller. While canallers have the look of a typical freighter, they were much shorter, as their size was restricted by the locks on the St. Lawrence River prior to the Seaway opening in 1959.
This is an ideal prototype, as no selective compression is required to have a layout sized boat. It is also suitable for most modeling eras, as these boats sailed from the turn of the century, with some surviving up into the early 1980s. Common commodities for these boats would include coal, grain, cement, and iron ore.
Kit includes all parts, fittings, and accessories for a complete model, including etched brass stanchions, and a fully detailed wheelhouse interior. Main structural assembly is simplified by the use of one piece castings. Model measures 36inches in length and 6inches wide, representing a 258ft long freighter. Additional mid-sections are available separately for those who require a longer boat.
Twin Lamp Post - 3 sets
Use to light street corners, sidewalks, parks, rail yards and more. 20mA/set RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 0.484 in w x 2.76 in h (12.3 mm w x 70.1 mm h) HO MLW M420 A/B Set - DC/DCC Ready - British Columbia (Lightning Stripe) #642, 686
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #676712
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory. HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Western Pacific #20001
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #137313
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory. Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low profile? Barber S-2-A with Timken rotating caps
Wheels: CNC-Machined 36in Wheels
Detroit Toledo & Ironton (DTI) Delivery 1970 Magenta shows off one of the most-requested paint schemes for the Tangent Greenville 86ft Box Car System. We appreciate the patience of DT&I modelers, as we wanted to get this car right with the correct 1970 Greenville body with accurate DT&I Magenta paint and lettering. This Magenta DT&I group totaled 54 cars ? It was also the first group to be delivered for use in the new Ford Brownstown Parts Distribution facility pool. Yes, these cars were pooled, so that means these beautiful Magenta 86ft giants served Ford US Parts Depots coast to coast in the Ford BRO pool lanes. Note the prototype photo on our website that shows a DT&I BRO car behind a GN painted, BN-restenciled SD45 presumably photographed on BN headed to Seattle. The DT&I cars feature the distinctive Brownstown body style, with extra vertical rivet rows at the ends of the side sheets. An accurate End-Of-Car Cushioning underframe shows off the 100-Ton Low profile Barber S-2-A trucks, 36in wheels and Timken rotating caps. HO Mark IV Code 100 Right Hand Curved Turnout
This Atlas Code 100 Customline Curved Turnout features nickel silver rail and black plastic ties that match other Atlas Code 100 trackage. This turnout can be set up as a remote or manual switch depending on which switch machine is added by the modeler. The turnout also features die-cast points and an isolated, die-cast metal frog with a power contact. You can use this power contact option to energize the frog and prevent loss of power when a locomotive is passing through. The outside radius of the turnout is 30 inches and the inside radius is 22 inches. ADMX #52340
(gray, blue; Molecule Logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. They have worn a wide range of colorful paint and lettering schemes over the years, 59ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59ft Cylindrical Hoppers feature:
Limited Edition - one time run of these roadnumbers!
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36In turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers HO Code 83 Snap Track - 15 Inches Radius Curve
Brown Tie, nickel silver rail.
Pricing is per single piece.
All Atlas code 83 track has brown ties and nickel silver rail.
12 pcs. to circle HO EMD SD9 - DC/Silent - Baltimore & Ohio #771
Baltimore & Ohio
- Correctly oriented cab interior for long hood forward operation
- Single fuel tank (First time done on a plastic model!)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more! HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - Santa Fe (ATSF) #350019
Product Information
Serve a wide range of HO industries with the 37ft 2980 Cubic-Foot Two-Bay Covered Hoppers from WalthersMainline. Based on prototypes introduced in the late 1980s, they can be found hauling cement, fracking sand, roofing granules and similar loads. Features of the layout-ready models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from late 1980s to the present
Separately molded and applied hopper gates
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately HO Alco RS-3 - DCC & Sound - Spokane, Portland & Seattle - as delivered - #94
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. DCC/Sound version features LokSound V5 decoder.
Plastruct 90408 ABS 1in Warren Open Web Truss (2pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1
HEIGHT IN MM
25.4mm
WIDTH IN INCHES
1-27/32
WIDTH IN MM
46.8mm
THICKNESS IN INCHES
5/16
THICKNESSS IN MM
7.9mm
LENGTH IN INCHES
12
LENGTH IN MM
300mm
USE DESCRIPTION
ABS OPEN WEB TRUSS – WARREN STYLE 2 Use for roof trusses, bridges, conveyors, space frames and other steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or pro PS-2 2003 2-Bay Covered Hopper - Denver & Rio Grande Western #18010
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers 1956 Chevy 210 Four Door Sedan - Unpainted and Resin Cast Kit Plastic-Insulated Transition Rail Joiners pkg(8) -- Code 83 to 70 North American-Style - Code 83 #6 Turnout - Streamline - Right Hand, Unifrog HO 73Ft Center Partition Car - Union Pacific #275189
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius HO 53ft Jindo Container - CSX (How Tomorrow Moves) UMXU Set #1 (3pk)
(#232521, 232604, 232651) (BLUE/YELLOW)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting HO Alco FA-1 & FB-1 Set - DCC & Sound - Canadian Pacific (Script Scheme) #4015, 4406
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds HO EMD SW9 - DC/ Silent - Canadian Pacific (CP Block Scheme) #7405
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Canadian Pacific:
Delivered in 1953 / GMDD
Short side handrails
Small number boards next to the headlight
Large barrel style headlight
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor HO RTR 40Ft Single-Door Steel Boxcar - Western Pacific #1953
(orange, silver, black)
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. Check out the entire line of Bowser HO Scale ready-to-run boxcars. HO Coal Trestle - Kit
DIMENSIONS:
24-1/2 x 4-3/8 x 1-3/4 inches (62.3 x 11.1 x 4.4cm)
Make quick work of coal deliveries in tight spaces with the HO Coal Trestle kit from Cornerstone! Installed in tight city lots and rural locations, the prototypes used gravity to speed unloading (and return to the railroads) of hoppers from the 1900s to the 1960s.
FEATURES:
- Molded ramp simplifies modeling track on grade
- Detailed trestle with supports, abutment, railing and walkway - optional bulkheads to build below-track storage bins also included
- Separate coal conveyor - prototypes also moved sand and gravel from hoppers to trucks
- Great addition to trackside coal dealers, lumber and building materials yards, heavy industries and more HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (Sand) #7021
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box HO Brass Chain - 12 Inches - 27 Links Per Inch
A-Line Chain is great for detailing all kinds of models in all scales. Available in a variety of sizes measured as links per inch, chain is also available in multiple kinds of metals. HO EMD SW9 - DC/ Silent - Erie Lackawanna (EL Gray & Maroon) #437
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Erie Lackawanna:
1970 Repaint
Optional -beehive- style spark arrestors with short stacks in polybag
Deck mounted side handrails
Carbody style handrails
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years. HO USRA Double sheathed wood boxcar
Wabash
Includes road numbers 79687, 79834, 79945, 80176
During World War I the US railroads were struggling to keep up with wartime traffic, in part because of a shortage of service- able freight cars. In an attempt to solve this problem, President Wilson nationalized the railroads under the United States Railway Administration, or USRA. One of the first tasks assigned to the USRA was to develop common designs for new freight cars. Among these was a 40ft double-sheathed wood boxcar with a fishbelly steel underframe.
Starting in 1918, nearly 25,000 copies of the double-sheathed boxcar were built and delivered to 24 railroads throughout the country. The cars were well received, and many cars continued in regular service on many roads into the 1950s with many updated to the newer AB-brake system.
Rapido’s new model of the USRA double-sheathed boxcar features an all-new body with correct fishbelly underframe and correct free-standing details. Models will be equipped with either KC or AB brakes as appropriate. These cars fill a need for a state-of-the-art model of this common car on any transition-era or earlier period layout.
Model Features
Accurate new tooling
Correct details including roof and handbrake
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Accurate decoration
Fully decorated and assembled
Factory-installed Macdonald-Cartier couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels WalthersMainline HO EMD SD70ACe-DCC ready Union Pacific
Bring the power of todays railroading to your HO Scale layout with the WalthersMainline EMD SD70ACe diesels. Starting with the SD70 introduced in 1992, the prototype underwent a number of upgrades and in 2005 the more powerful SD70ACe was unveiled with AC traction motors. Today, these colorful locos can be found on the rosters of lines big and small. Nicely detailed and affordably priced, additional features include:
Limited edition - one time run of these road numbers!
One of the backbones of contemporary loco fleets
Prototypes in service 2005 to the present
Easily handles 18in radius curves (22in or larger recommended)
LED Lighting includes:
High or low headlight per prototype
Working front ditch lights
Constant and directional lights
Fully assembled
21-Pin DCC plug
Same powerful drive as WalthersProto(R) locos featuring:
5-pole skew-wound motor
14:1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Dual machined brass flywheels
Heavy die cast metal chassis
Molded drill starter points for grab irons - easily added with SD70ACe Diesel Detail Kit (910-251, sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Make your WalthersMainline SD70ACe more realistic with these accessories, available separately:
SD70ACe Detail Kit
Walthers Double Ended Pin Vise
Walthers Drill Bits
HO 19,600 Gallon Tank Car - Cerestar (NATX) #190145
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Built: BLT 11-99
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127408
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (NATO Green) #7020
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box Athearn HO Scale - RTR 30,000 Gallon Ethanol Tank Car - CTCX - #1 - 3pack
Detailed Information
301135, 301140, 301155
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in HO Trinity 3-Bay Hopper - AGPX (3pk) #1
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust HO Elevator Add-on Silos - Kit -
This kit measures: 9 x 4-1/2 x 9 in (22.8 x 11.4 x 22.8cm)
This Cornerstone structure kit provides parts to build four matching concrete silos for the ADM(R) Grain Elevator (933-3022 sold separately) and lengthen the corrugated metal headhouse. HO EMD SD70M-2 Diesel - DCC & Sound - Providence and Worcester Railroad P&W #4301
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
PW FEATURES:
Former FEC units
Repainted into orange and black
Horns mounted on the side of the long hood; separate horn styles for each road number
P&Ws two units were originally painted orange and brown and ran for several years in this guise. In 2021 they were repainted into the orange-and black scheme of parent company Genesee and Wyoming.
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box N Budd RDC-1 (Ph 2) - DC/Silent - CP Rail (Action Red)
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height HO EMD GP40 - DCC & Sound - SSW/ Cotton Belt #7607
1966+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO 50Ft PCF B70 Boxcar - w/ Youngstown Doors - SSW/Cotton Belt (with DFL) #66830
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership. G2 Dash 9-44CW - DCC & Sound - FMG #007
ETA: Late October 2022
Detailed Information
FMG FEATURES:
Spare knuckles on rear pilot
FMG-specific handrails with extra railing
Front-only ditch lights mounted on anticlimber
Nathan K5LA horn
FMG NOTES:
Part of a late-production MRL order, these SD70ACes also feature 6-step walkways like the BNSF units. The MRL units have standard GPS dome antennas on the cab roof.
The railways 240-wagon iron ore trains are amongst the heaviest trains in the world. The 1,435 mm (4 ft 8 1⁄2 in) (standard gauge) heavy haul railway is used by 35,200-metric ton (34,644-long-ton; 38,801-short-ton) trains up to 2.5 kilometres (1.6 mi) long carrying 29,000 metric tons (28,542 long tons; 31,967 short tons) of ore at 40-tonne (39-long-ton; 44-short-ton) axleload (the weight of the two 4,000-horsepower (3.0 MW) engines is extra). The railway is available to other miners for a fee.
FMG rosters a fleet of high horsepower 6-axle locomotives, including 15 Dash 9-44CWs.
DASH 9 SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box Tru Color Paint 044 - Acrylic -Penn Central Green 1 oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). GLa 2-Bay Hopper: PRR Shadow Keystone - 6(pkg)
Features:
All-new tooling
Scaled from original blueprints
Die cast frame and floor for optimum weight
Full interior rivet and bracing details
Factory installed wire grab irons
K- or AB-brake gear installed as appropriate
Factory installed Kadee #158 couplers in narrow draft gear box
Turned metal wheels in correct PRR 12D-F8 trucks
Accurate paint and lettering
Multiple road numbers available for each paint scheme and railroad
Detail Variations:
As operated from 1954 to 1961
6-pack includes the following numbers, all individually packaged:
#153843
#154123
#155472
#701626
#702186
#705934 F30A 50Ft Flat Car: Penn Central #701550
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
PRR X31A Double-Door Boxcar: Shadow Keystone, Late - Single Car #69287
Detail Variations:
6-pack includes the following numbers:
#69007
#69156
#69287
#69371
#69483
#69492
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale G2 SD70M-2 - DCC Ready - CN #8921
Genisis 2.0 Features:
See-through pilot steps, Lit Marker Lights (CN)
LIT numberboards & ground lights
Detailed Information
CN NOTES:
Part of CNs large fleet of SD70M-2s, these units are equipped with operating marker lights for DPU service. As part of the railroads new heritage program, CN 8952 was painted in the GTW scheme, and CN 8898 received the the special placards celebrating CN independence on the sides of its nose.
ROAD NUMBER SPECIFIC FEATURES:
#8898
White cab roof
CN heritage decals on each side
#8921
Standard CN Web Address paint scheme
#8934
Mismatched compartment doors on left side
#8952
Grand Truck Western Heritage Unit
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Etched see-through steps
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage Diesel EMD SD40-2 - Saint Lawrence & Hudson #5627
ESU LokSound DCC & Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch N Scale 1970 Bedford RLHZ Green Goddess Self-Propelled Pump - Glamorgan Fire Service HO Galvanized Culvert Pipe - 24 Inches (4pk)
Specifications
Scale: HO (1:87)
Sizes: 0.28 inch
Length: 3.4 inches
Galvanized steel culvert pipes have been around for over a century and serve many purposes from storm sewers to drain pipe and even irrigation. Found where roads or railroads cross low lying areas, streams, or other waterways, these galvanized pipes provide a pathway for water to flow while reducing erosion at these critical crossings.
Suitable for any era, these galvanized culvert pipes will look right at home on your layout. Each HO-scale pipe section is 25 scale feet long and comes in a variety of diameters, suitable for many different applications. Hollow throughout, each pipe features realistic corrugations both inside and out. HO 40Ft Hi-Cube Dry Containers - Maersk Sealand (3pk) Set #1
3 pack road numbers include : MSKU 836088/836426/836519
Body: Type A
Door: Type C
Latch: Type C
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before. HO Vintage Firearms & Sporting Signs - 1940-60s (40)
Vintage Firearms and Sporting Signs printed on 2 paper sheets. All-New bluetooth controlled Tsunami2 DCC Sound Decoder
Blunami will change the way you enjoy the model railroading hobby
The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.
Currently the app is only available for Apple iOS devices (versions 8 or newer). The app offers an easy graphic interface to adjust all Blunami settings and features with drop-downs and slider bars. All programming can be done through the app, as well as with your DCC system. You no longer need to understand CVs or own a command station to run your trains!
HO Pressureaide Covered Hopper - Archer Daniels Midland (Leaf) #50016
(gray, blue, green, Leaf Logo) 1:87 1966 GM 4107 - Indiana Motor Coach Co. HO 40ft ACF Modernized Welded Boxcar - Detroit & Mackinac #3118
FEATURES:
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers HO UAC TurboTrain Additional Coach: Late Amtrak
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model. N Scale 1978 Ford Fairmount Sedan - Black
Features:
Side view mirrors
Head and tail light glazing
Interior detail
Simulated rubber tires
Under carriage detail HO 59Ft Cylindrical Hopper - Toronto, Hamilton & Buffalo #1505
(black, white; Bow Tie Logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
One time run of these roadnumbers, order now - limited quantity available
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers Great Lakes Steam Diesel Tugboat Kit - Unpainted and Resin Cast
(1/87 Scale)
These steam tugs were seen all over the Great Lakes from 1900 until their conversion to diesel during the 1950s. This kit is a waterline model, based upon the Great Lakes Towing Companys 81 L.C. Sabin.
-Cast Polyurethane Resin Kit
-Easy Assembly
-Details Moulded in Place
-Accurate
-Less Trucks and Couplers
Try Sylvans Resin Prep! Helps prepare your model for painting!
Part #SSM-A001
Carrier Reefer Unit
Kit - Fits Any Semi Reefer Trailer
NO More to be Made Again !!! HO SW1000 Switcher - DCC & Sound - BNSF #3617
ETA: June 2023
Detailed Information
BNSF FEATURES:
Roof mounted beacon (Flash function in DCC only)
Fire cracker antenna
MU hoses
Winterization cab window
In the late 1960s CB&Q purchased a small group of EMDs new SW1000 switching locomotive that were incorporated into the new Burlington Northern roster after the 1970 merger. BN then purchased their own SW1000s shortly thereafter. In 1996 that fleet was then absorbed into the BNSF roster while retaining the BN green and white paint scheme. That BN heritage is clearly demonstrated in this Primed For Grime release. Many of the SW1000s retained their green paint up until retirement from the BNSF roster.
SW1000 LOCOMOTIVE NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SW1000 LOCOMOTIVE STANDARD FEATURES:
Lit ground lights
Detailed cab interior
Drop steps unless noted
MU stands
Exhaust stack
Printed numberboards
Fine scale handrails
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Cube Speaker for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Excellent low-speed operation
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust HO EMD GP7R - DC/DCC Ready - Chicago & North Western CNW #4140
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
CNW FEATURES:
NEW! Non-Dynamic with roof access hatches
1700-gallon fuel tank
Partial skirting above fuel tank
All-weather firemans side window
Flashing xenon strobe (in DCC mode only)
Wheel bearings per prototype
Era: 1982+
Era: 1993+
Era: 1982+
Chicago & North Western-
-Union Pacific Licensed Product
These Ex-CRI&P units were purchased by C&NW second-hand from Precision National in 1981, serving the railroad in a variety of service for the next 15+ years. 4160 became inoperable in 1998. In 2007 it was moved to the Illinois Railway Museum and repainted into the blue and white Rock Island paint scheme.
ROAD NUMBER SPECIFIC FEATURES:
#4140 Phase III body, 5-Chime Horn, Firecracker antenna, Front snowplow
#4160 Phase II body with 86inch Doors, 3-Chime Horn, Spark arrestors, Front snowplow
#4193 Phase II body with 86inch Doors, 5-Chime Horn, Front snowplow
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch HO SD38 - DCC/Sound - CanDo Rail Services #5201
CCGX FEATURES:
CanDo Rail Services is a contracting company based out of Brandon, Manitoba, Canada. They preform track maintenance for large industries, operates as a shortline, and contracts switching services in Ontario, Manitoba, and Alberta Canada.
ROAD NUMBER SPECIFIC FEATURES:
#5201
- Ex: DMIR. Short fuel tank
- triple clasp brakes
- M3 horn
- UP style plows
- all-weather windows
- ditch lights on both ends
- Classified as a SD38AC
#5202
- Ex-BLE. Medium fuel tank
- high-mount truck brakes
- M3 horn
- UP style plows
- all-weather window
- ditch lights on both ends
- Classified as a SD38AC
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
Plate ACI Placards -8pkg
In 1967 the rail industry introduced a nationwide system to track freight cars as they moved across the railroad network. The visual result of this technology was the application of ACI labels to the side of freight cars. These labels – or placards – were required on all freight cars from 1968 to -1979, although the labels lasted far longer than that and can still be seen today. These finely-executed placards allow you to reproduce this detail on your freight car fleet, and include correct dimensions. HO ET44 Tier 4 - DCC Equipped - Kansas City Southern #5008
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units. Light Rust Deposits
The perfect product to recreate a rust texture in a light rust color in surfaces of vehicles or accessories. Once they are dry, they have the same scale appearance as real crusted rust. The finish is extremely authentic and can be combined with other tones for more realism. HO RTR 45Ft Fruehauf Z-Van Trailer - Southern Pacific #250111
Detailed Information
MODEL FEATURES:
Separately applied mud flaps
Rubber tires
Fully-assembled and ready to use out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration HO Flexi-Van 40ft Trailer - Milwaukee Road #3 (2pk)
(logo and Flexi-Van Placard; side doors)
Capture the color and variety of early intermodal operations with SceneMaster flexi-van trailer 2-Packs! Introduced in 1958 with removable wheels for use on specially-equipped flexi-van flatcars, they were later converted to standard 40ft trailers for road and rail service and served into the 1980s.
FEATURES:
- End or side doors as appropriate
- Detailed wheels and bogie with landing gear 1:87 NFI Xcelsior XN40: DDOT Detroit
FEATURES:
-Diecast metal.
-Pad-printed graphics.
-Very limited edition!
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX (6 pkg) #4
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Includes Road Numbers:
21125
21173
21200
21212
21268
21294
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate HO Lightweight Coach - Amtrak - Phase I #6445
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper HO Enterprise 2-Bay Covered Hopper - GFCX #110
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme Code 83 Snap Track - 3 Inches Straight - 4 pcs in blister package
Brown Tie - 3 inches per section HO Just Plug Lighted Vehicle - Green Pickup
This little pickup still has a few thousand miles left and is up for anything!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle) HO 45ft CIMC Container - Crowley
(brown, white)
FEATURES:
- Based on common size & style used worldwide
- Fully-assembled & ready to use
- Colorful paint & lettering schemes
- Separate door latch details
- Realistic loads for WalthersMainline(R) & WalthersProto(R) well cars, sold separately
- Great detail for terminals, highways & industrial scenes HO Scale GP38 - DCC & Sound - Santa Fe (Yellow Warbonnet w/ Class Lights) #2337
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO Flatcar w/Logging Crane - CP Rail #304860
(Red, black, Multimark Logo)
This Walthers Trainline HO Scale Flatcar with Logging Crane is great for adding to any freight train on your layout or train set. Trainline freight cars feature RP-25 metal wheels for superior performance on all kinds of track including smaller scale-sized Code 70 and larger rail. With their added weight, body-mounted knuckle couplers, and wheel tread matched to National Model Railroad Association standards, wheels on Trainline rolling stock are compatible with almost all North American HO model railroads and can be used as you expand your railroad. Other features of this Flatcar with Logging Crane include molded details that stand up to handling during operation and realistic paint schemes for good looks.
-Fully assembled, ready to run
-Perfect for use with Trainline Log Dump Cars
-Colorful paint and lettering schemes
-Fully assembled, ready to run
-Use with any HO Scale train set
-Body-mounted magnetic knuckle couplers
-RP-25 metal wheels
N Scale 60ft Coach Car - New York Central #1959
FEATURES:
- Based upon C&NW and CNJ prototypes
- Full scale dimensions and details
- All cars include separately applied window glazing, diaphragms and roof vents
- Observation car includes separately applied end railing details and a drumhead
- Detailed interiors (excluding baggage car)
- AccuMate operating knuckle couplers Ultra Fine Red Sable Brush - Size 3/0 All Scale Classic Trees - Ready Made - Early Light 5-6inch (2 pkg)
5 to 6inch, 12.7 to 15.2cm Tall
Product Information
Make Realistic Scenery in Minutes
Give your layout a change of scenery with Woodland Classic Trees from Woodland Scenics. Fully assembled and ideal for foreground detail, the selection includes several types of trees along with hedgerows. The models are finely detailed with painted, flexible trunks and foliage with natural contrast to enhance any layout or diorama. A unique planting pin and detachable base allow for temporary placement, or ease of removal for cleaning and maintenance. Easily mixed and matched to capture the variety found in nature, trees range from 3/4 to 9inch tall, making them ideal for modelers in all popular scales. Small Wooden Coaling Station - Kit
3 x 5-5/8 x 7-13/16 in
(7.8 x 14.1 x 19.7cm)
Steam-era modelers - especially those of you with limited space - check out this Small Wooden Coaling Station from Cornerstone! Based on a 40-ton capacity prototype, its a perfect combination of compact footprint and terrific detail ideal for branch lines, short lines, or smaller end-point terminals.
Features of this detailed HO structure kit include:
Signature steam-era structure!
Based on a 40-ton capacity CB&Q prototype
Typical of small towers used on many railroads big or small
Compact footprint ideally sized for most HO layouts
Highly detailed support timbers, machinery house, grate, coal chute, counterweights and more
Use alongside other Cornerstone structures (each available separately) to build a complete engine terminal
Molded in gray plastic
HO Milton A. Corporation - Kit
This kit is built up from individual components from several of our existing Pikestuff kits. We have done the kit-bashing for you by providing you with the parts and instructions to build a unique building from the Pikestuff inventory. A small amount of cutting is required without cut lines but cutting the soft plastic is easy and the instructions will guide you through each step along the way.
Dimensions: 4-1/8 X 8-1/4 and 9-3/4 X 11 inches X 7 inches tall. HO 85ft General American G85 Flatcar - Erie Lackawanna #8737
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches HO 37ft General American Meat Reefer - Armour #11890
Rapidos 37ft Meat Reefers Feature:
- Complete underbody with all piping
- Super-detailed Barber S-1 trucks
- (Insulated turned blackened metal wheelsets)
- Accurate roof hatches and hardware
- See-through brake platforms
- Separate grabs, ladders and roofwalk
- Accurate paint schemes
- Multiple car numbers per scheme
- Factory-installed Macdonald-Cartier couplers
- Available in singles or multi-packs.
All Scale Learning Kit - Rock Faces
Learn to make, install and color realistic rock formations. The kit contains enough product to make four to five rocks.
Value-packed tools specifically developed to teach beginning modelers and other hobbyists how to use the Terrain and Landscape Systems. Learn to sculpt terrain, cast, color and install rocks, landscape various scenes, create paved areas, make trees, model water features and other scenic details. Reseal packages for easy storage. HO 2600 Gallon Fuel Tank Set - EMD HO 60ft NSC 5150 3-Bay Covered Hopper - Cargill (ICMX) #1007
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended. Western Cullen-Beacon Set (6) HO GE Type Air Filter - Set w/Mount & Pipes N Scale Pole-Mast LED Street Light - 6.5cm Tall
Faller N Scale LED streetlights are perfect for illuminating scenes on your layout. Each has long-lasting LEDs complete with wired-in resistor for easy connection to 12 to 16V power. Athearn Roundhouse HO 50ft ACF Boxcar AD&N #8102
Detailed Information
MODEL FEATURES:
70-ton Roller Bearing trucks with 33in wheels
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Body mounted McHenry operating scale knuckle couplers
Wheels with RP25 contours operate on Code 70, 75, 83, 100 rail
Minimum radius: 18in
Specifications
COUPLER STYLE: McHenry Scale Knuckle HO F89F Trailer - RTTX/Yellow #151894
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast underframe
- Wire formed brake plumbing
- Detailed deck
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Minimum radius: 22 inches
- Recommended radius: 24 inches Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - New York Central - Capital Scheme #8005
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover HO 10 Inch Track Alignment Gauges - Curved - 30 Inch Radius
RibbonRail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking, and joining rail. Track Alignment Gauges are precision machined to NMRA standards and will work on any code of HO Scale rail. Available in many curve radii as well as straight. HO USRA Single-Sheathed Boxcar: PRR (Youngstown door)
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels Tru Color Paint - Acrylic - GO Transit Dark Green - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). Oval Speaker - 25 X 14mm
This small speaker is perfect for narrow hood diesels and anywhere else where space is at a premium.
Dimensions: 25 x 14 x 5.2mm(D)
Frequency Response: 740Hz - 4kHz
Power: 1 Watt (Nominal) 1.5 Watts (Peak)
Impedance: 8 Ohms HO 40Ft Boxcar w/ Early Improved Dreadnaught Ends - Great Northern (Chinese Red) #21901
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme Built-&-Ready Landmark Structures - Dansbury Depot
Assembled - 7-1/2 x 5-9/16in (19 x 14.1cm)
The most important building in any small town is the local depot. A gateway to the outside world, it was also the first thing a visitor saw when they stepped off the train! As a result, railroads went to great lengths to build attractive stations, painting them in company colors and adding a variety of trim to make the basic structure more handsome.
Small towns along your line will be delighted to have this building alongside the tracks. Its complete with a high platform, nonworking train order signal and platform lamps, luggage, baggage wagon, benches and much more.
HO Evans 100 Ton Coil Car - Chicago & North Western #39603 HO EMD SD9 - DCC & Sound - Chicago & North Western #6605
Chicago & North Western
- Rebuilt at the Oelwein Shops with chopped down nose - a first in HO Scale!
- Modified panels on side sills of locomotive
- Modified/plated over details of dynamic brake blister (Smooth plating over where grilles once were)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more! HO AutoFlood III RD Coal Hopper - PGNX #1180
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO Coarse Turf - Burnt Grass FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends HO Single BiLevel Commuter Car - Metrolink (White Ribbon) #187
Los Angeles - Series 3
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality HO 53ft Jindo Container - Canadian Pacific Set #1 (3pk)
(#234415, 234423, 234448) (RED/WHITE)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting Acrylic Flat Colors - Flat Aluminum - 3/4oz (23mL) Bottle
XF-16
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish. HO Scale - 46/47 Mercury Half Ton Flatbed- Unpainted and Resin Cast Kit Amtrak Phase 3 (late) - set #4
Consist numbers- 156, 157, 179, 180, 181
Turboliner features:
Accurately designed using original blueprints and field measurements
Tinted windows, full interior details and flicker-free interior lighting
Separate factory installed grab irons
Full underbody details and highly-detailed trucks, including third-rail shoes
Both Power Cars come with smooth, reliable drive systems for optimal performance
Working headlights, marker lights and cab-mounted strobe lights
DCC models feature accurate sounds sourced and remastered from original videos HO Steam Turrett - Brass Casting HO Ashmore Hotel - Kit
DIMENSIONS:
8-5/8 x 4-7/16 x 13-7/8 inches (21.9 x 11.2 x 35.3cm)
The Walthers Cornerstone HO Scale Ashmore Hotel is a high-rise structure that is ideal for any downtown or big city layout scene. This 11-story building features a granite facade and ornate trim. Its easily customized using three street-level facades that represent the early 1900s, the 1950s and the modern era making it great for steam or diesel-era layouts. Modular design also allows you to combine kits for a longer, wider to taller model and it can also be built as a background structure against your painted or printed backdrop scene to add depth.
HO 1976 Chevy Stepside Pickup - Midnight Black
This pickup is perfect for North American street and highway scenes. This detailed truck features a die cast metal body, interior seats, window glazing and authentic decoration. Perfect for rural scenes or carting loads around town, this truck is a great addition to any 1970s and later layout scene. 85ft General American G85 Flatcar - Trailer Train - Santa Fe #89775
Product Information:
Limited edition - one time run of these road numbers
Prototypes handled trailers and containers from 1961 to mid-1980s - used for general service loading into the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in up or down position or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
33In turned metal wheelsets
Proto MAX metal knuckle couplers
Add more realism in minutes with SceneMaster trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24In
HO Bi-Level Auto Rack - UP Rack/TTGX Flat Car #981785
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
Spray Can - Medium Sea Gray #2 (RAF) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface. Metra #99
Model Features:
•Scaled from field measurements & diagrams of a GO F59PH
•End metal handrails with plastic stanchions
•Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
•All-metal etched grilles
•Full cab interior
•Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
•Operating headlights, rear light, and ditch lights
•GO units feature functioning tri-color class lights (white, green and red)
•American units feature functioning red marker lights
•Accurate sounds recorded from a GM 12-710G3A
•DCC/Sound units come equipped with an ESU LokSound decoder
HO MLW M630 - DCC & Sound - CP Rail (Multimark) #4570
5inch stripe w/water expansion tank, no ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound V5 decoder.
Bowser does not recommend LOK sound locos for use on DC layouts. HO 89Ft Flatcar w/Tri-Level Open Auto Rack - St. Louis San Francisco Rack/ Trailer-Train Flatcar #913646
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers HO N5 Caboose - Reading & Northern #477514
N-5 Caboose – now with separate hand grabs!
Ready to Run with added brake wheel, air tank, brake cylinder, triple valve, free rolling trucks with metal wheels and knuckle couplers. 1/4 inch OD Round Brass Tube - 0.029inch Thick x 12inch Long
Round Brass Tube (1 pc)
Outside Diameter: 1/4 inch Detailed Information
MODEL FEATURES:
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
McHenry scale knuckle spring couplers installed
Painted and printed for realistic decoration
Weighted for trouble free operation
33in machined metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
The use of ice to refrigerate and preserve food dates back to prehistoric times. Through the ages, the seasonal harvesting of snow and ice was a regular practice of many cultures. By the turn of the 20th century, manufactured ice became more common. The Pacific Fruit Express (PFE), for example, maintained seven natural harvesting facilities, and operated 18 artificial ice plants. Their largest plant (located in Roseville, California) produced 1,100 tons of ice daily, and Rosevilles docks could accommodate up to 254 cars. At the industry’s peak, 1,200,000 tons of ice was produced for refrigerator car use annually.
A late-19th century wood-bodied reefer required re-icing every 250 miles (400 km) to 400 miles (640 km). The typical ice-bunker reefer from the 1920s were originally constructed with wood sheathing. Later, these early wood constructed cars would be replaced with steel constructed cars with plywood interiors by the 1940s. Vents in the bunker at the end of the car, along with slots in the wood floor racks, allowed cool air to circulate around the contents.
Specifications
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1940 - 1960
Minimum Age Recommendation: 14 years
Is Assembly Required: No HO HEP E8A + A Set - DCC & Sound - Canadian National (Executive - Noodle) #102/103
The IC and CN E9A Details Include:
Photo courtesy of Craig Walker
Correct HEP muffler and hatch
Modified pilots
Blanked sides with appropriate grille work
Roof-mounted cooling coils
Non-skirted fuel tanks
Hyatt roller bearing journal covers
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Accurate E8 sounds provided by ESU LokSound
Complete lighting effects ? headlights, recessed ditch lights in nose, class lights, backup lights, ground lights, cab lights and more. (Not all lighting features will work in DC mode.)
Numerous road-specific detail parts in both plastic and etched metal. HO International 4300 Utility Truck w/Drill - Assembled - White
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Position-able Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
Introduced in 2002 to replace the 4000-series trucks of the 1990s, the medium-duty 4300 was built in three variations and became a very popular chassis for a variety of commercial applications. Today, they are still in production as the International Durastar.
HO GMD SD40-2W - DC/DCC Ready - CN (Non Dynamic Sergeant Stripes) #5361
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low profile? Barber S-2-A with Timken rotating caps
Wheels: CNC-Machined 36in Wheels
Detroit Toledo & Ironton (DTI) Delivery 1970 Magenta shows off one of the most-requested paint schemes for the Tangent Greenville 86ft Box Car System. We appreciate the patience of DT&I modelers, as we wanted to get this car right with the correct 1970 Greenville body with accurate DT&I Magenta paint and lettering. This Magenta DT&I group totaled 54 cars ? It was also the first group to be delivered for use in the new Ford Brownstown Parts Distribution facility pool. Yes, these cars were pooled, so that means these beautiful Magenta 86ft giants served Ford US Parts Depots coast to coast in the Ford BRO pool lanes. Note the prototype photo on our website that shows a DT&I BRO car behind a GN painted, BN-restenciled SD45 presumably photographed on BN headed to Seattle. The DT&I cars feature the distinctive Brownstown body style, with extra vertical rivet rows at the ends of the side sheets. An accurate End-Of-Car Cushioning underframe shows off the 100-Ton Low profile Barber S-2-A trucks, 36in wheels and Timken rotating caps. Ortner 5-Bay Rapid Discharge Hopper - OMAX (5-pack)
MODEL FEATURES:
-Removable load
-Decorated models fully-assembled and ready to run out of the box
-Highly-detailed, injection-molded body
-Separately applied wire grab irons on side ladders
-Separately applied brake wheel
-Body mounted McHenry operating scale knuckle couplers
-Minimum radius: 18inch
-All 5 packs come with unique road numbers
-Machined metal wheels with RP25 contours operate on all popular brands of track
-IPSX, OMAX, and SMEX are coal service cars. CBNS, HLMX, and ITGX are sugar beet service cars
-Sugar beet service cars will include newly-developed etched upper extensions included in poly bag
PROTOTYPE AND BACKGROUND INFORMATION:
The unit train concept was pioneered by Ortner Freight Car Co. in 1960 as an effort to streamline bulk cargo unloading. Robert Ortner, developer of the rapid-discharge door system, targeted unloading a train of rapid discharge cars in 30 minutes to an hour. Previously this same task would take four hours or longer. Unit trains shuttle back and forth between mines and power plants eliminating dwell time in yards. The concept has become ubiquitous to the modern railroading scene. In more recent years many of these cars have been converted to sugar beet hauling service and had capacity extensions installed.
HO RTR 40Ft Steel Side Boxcar - Delaware Lackawanna & Western (Blue Coal) #51502
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. HO Silver Springs Bus Terminal - Kit
The Cornerstone Series Silver Springs Terminal is based on the streamlined structures that were built across the continent beginning in the late 30s. The clean lines of streamlined designs were applied to everything from light switch plates to vacuum cleaners; all evoked the look of speedy streamlined trains. With its curved windows and corrugated canopies, this transit terminal perfectly captures the look of the era. Bus stations similar to Silver Springs Terminal are still found in many cities, so this model will be a welcome addition to any transition- or diesel- era layout!
- Perfect for your layouts 1930s and later
- Classic streamline modern design
- Includes boarding canopy
- Realistic signs
- Fits steam or diesel eras
- Easy-to-build plastic kit
- Molded in appropriate base colors plus clear glazing
The finished structure measures: 11-1/4 x 8-3/4 x 3-1/2 inches (28.5 x 22.2 x 8.8cm)
HO Scenic Accent Figures - Young & Old (3 Pairs)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism. Racing Blue Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name. Thomas & Friends Thomas with Annie and Clarabel Ready To Run Electric Train Set - HO Scale. Thomas and his loyal coaches Annie and Clarabel are carrying a number of very important passengers, and you are invited in join in their travel fun! This HO scale electric train set is the perfect way to begin your Thomas and Friends collection. This ready-to-run train set includes: Thomas the Tank Engine with moving eyes, Annie coach with international style hook-and-loop couplers, Clarabel coach with international style hook-and-loop couplers, 36in circle of snap-fit E-Z Track? with 11 pieces of curved track and 1 curved plug-in terminal rerailer, power pack and speed controller, illustrated instruction manual.
Build your Thomas & Friends collection one friend at a time!
Features:
Complete Ready To Run Train Set
Powered by a Thomas the Tank Engine with Moving Eyes
Includes; Annie and Clarabel Coaches with International-Style Hook and Loop Couplers
36in Circle of Snap-Fit E-Z Track, Power Pack and Speed Controller
illustrated instruction manual
HO Scale 1:87
Retail Package Measurements: L 19.5 in., W 3 in., H 18 in. 72Ft Centerbeam Flatcar with Standard Beam - Ready to Run - Southern #601070
Product Information
Shipping lumber by train is easy for your HO railroad with a fleet of WaltherMainline 72Ft Centerbeam Flatcars on the job! Designed to speed loading and unloading, these bigger cars entered service in the 1980s and quickly became a favorite with shippers and customers. These nicely detailed models are based on earlier cars built with oval cut-outs (popularly known as -opera windows-) on the centerbeam to reduce overall weight, which are still in service with a wide range of railroads and lumber producers. Other features include:
Limited edition - one time run of these roadnumbers!
Heavy die-cast metal underframe for excellent tracking
Correct 36In turned metal wheelsets
Proto MA metal knuckle couplers N Scale 52Ft Mill Gondola - CEFX (3pkg)
Detailed Information
MODEL FEATURES:
Body-mounted McHenry knuckle couplers installed
Fully assembled and ready for your layout
Screw mounted trucks for accurate tracking
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust Testors - Spray Enamel - Metallic Gold
Testors 3 oz Aerosols come in over 50 popular colors and 9 different finishes. They offer superior adhesion to a variety of surfaces including wood, metal, glass, terra cotta, ceramic bisque and more. They are fast drying and easy-to-apply which means quick project completion. HO Union X-3 Tankcar - UTLX (1930s Paint) (6 pkg) #2
Detail Variations:
Equipped with KC brakes
6-pack includes the following numbers, all individually packaged:
#32007
#32179
#34824
#33873
#33917
#35881
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme. Decoder Buddy Mini 2.2K Axial
The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications. There has also been interest in HOn3 and S-Gauge applications.
N Scale 40Ft Refrigerated Container - ONE Set #1 (3 pkg)
Road Numbers: SZLU 9564004, 9544707, 9556478
MASTER MODEL FEATURES:
Features:
Prototypically accurate Daikin reefers
40-foot High-Cube Refrigerated Container
Composite materials sandwich-sides design
Detailed picture window refrigeration unit with separate parts
ISO Type 45R1
Five hinge / four bar doors with OUT style handles
Each set comes as a 3-pack Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- SP -B-70-54 Delivery 2-1970
Product: Greenville 86′ Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Southern Pacific: This B-70-54 group covers SPs first order of quad door cars that were part of the GM Stamping Pool out of Cleveland, Ohio on the B&O. The scheme, of course, is simply one of the coolest paint jobs ever applied to a Greenville 86ft boxcar. Hold this car in your hand to appreciate the nuanced differences between white stenciling and SP Lettering Gray stenciling. From the huge dark gray arrows pointing to the centered SP logo, to the smallest black door handle detail, it?s all there. The SP cars feature their as-built 1970 appearance that includes Apex crossover platforms, a Universal hand brake housing (with separate long handle!) and a Universal brake wheel. SP ordered their cars with Center-Of-Car cushioning, and we have duplicated this setup, with a complete COCC underframe and draft gear. 70-Ton Trucks with 33in wheels and rotating Timken roller bearing caps finish off this replica. These SP replicas are Ready-To-Operate in eight numbers! Ballast Bag - Fine Light Gray (21.6 in3)
Realistically model railroad track, crushed rock, and stones.
Easy to use and colorfast. HO - Siemens ACS-64 - DCC & Sound - Amtrak/Demonstrator (Flag)
Features:
DCC sound-equipped ACS-64 includes a TCS WOWSound CD-Quality 16-bit 44,100Hz decoder with Audio Assist
Sounds package includes: horn, bell, cooling fan/power inverter, pantograph extension and retraction, coupler close/release, brake release and application, momentum, crew alert, grade crossing quill, departing and arriving station announcements, and more
Keep-Alive device for uninterrupted operation, even over dirty track and remappable light functions, die-cast frame, and selector switch for choice between rail and pantograph operation.
Performs best on 22inch radius curves or greater
HO Scale 1:87
Product Measurements: L 9.5 in., W 1.5 in., H 2 in.
Retail Package Measurements: L 12.5 in., W 2 in., H 3.5 in. F30A 50Ft Flat Car: PRR 1960s Era #475003
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
Delaware & Hudson #9063 (black, yellow, Spelled-Out Road name)
Ready to Run
Crisp details and sharp painting and printing
Metal wheels
Knuckle couplers HO Bi-Level Auto Rack - CSX/TTGX Flat Car #993086
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
Evergreen Scale Models 2100 .100in Opaque White Polystrene V Groove Siding (1 Sheet)
.020in (.50mm)THICK X .100in ( 2.5mm) GROOVE SPACING X .018in (.45mm) GROOVE WIDTH. GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
AVAILABLE IN 6inch X 12inch AND 12inch X 24inch SHEET SIZES HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian Pacific #304666
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers Acrylic Paint - B&M Blue (1oz)
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). HO ALCo RS-3, Phase 3 - DCC/Sound - Boston & Maine #1512
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- fuel tank
- can motor
- flywheels
- blackened wheels with RP25 flanges and knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound V5 decoder HO RTR 55 F-100 Panel Truck - Reliable Plumbing
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Clear window glazing
- Rubber tires 87032 Masking Tape - 18mm Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.06 (10pcs pkg) HO High Speed Limit Signs (16pk) HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14087
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate HO 40Ft Wood Reefer - UTRX #11633
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch HO GMD SD40-2W - DC/DCC Ready - CN (Non Dynamic Sergeant Stripes) #5360
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights HO SD70 - DCC Ready - Norfolk Southern #2567
NS FEATURES:
Acquired by NS after 1998-1999 split of Conrail
Antennas and conduits on cab and long hood
Nathan K5LAR24 horn
Cab vent
Air Conditioner
Small front plow
-Dual- fuel sight glasses
Late fuel tank
Spare knuckle brackets on rear pilot
This group of former Conrail SD70s joined the NS fleet in 1998 because of the split up of Conrail between NS and CSX. Early repaints featured diagonal dashes along the frame.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?- Enamel Product.
This enamel wash is specially designed to bring out the details in gray warships typical of many nationalities from the Kriegsmarine, United States Navy, or Imperial Japanese Navy. Also it can be used in other subjects such as aircraft or gray tanks.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows.
The excess of the wash can be easily removed with a clean brush and White Spirit. HO Trenton Works 6348 CN Boxcar - Canadian National (w/ Conspicuity Stripes) #598145
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme HO Custom Brown Wood Barrels - Food/Flour (5pk)
Pre-painted brown and labeled. Assorted product labels in each set. HO G2.0 SD60M Tri-Clops - DCC & Sound - Ex-BN CIT Group (CBFX) #6028
Primed for Grime Locomotive
CBFX FEATURES:
Ex-BN, unique patches/paint per road number
Small EMD plow, faded paint effect
Front deck mounted ditch lights
Cab door with window
After BNSF sold off some of their aging fleet of SD60Ms, a small batch were purchased by CIT group as leased power. They can be found on many different railroads as extra power.
ROAD NUMBER SPECIFIC FEATURES:
#6025
Black reporting marks on cab
small CIT logo on body
faded BN logo on nose
yellow frame stripes.
#6028 `
White reporting marks on cab
large CIT logo on body
painted out BN nose logo
yellow frame stripes.
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately ?painted and ?printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Warranty service available
Minimum radius: 18inch Recommended radius 22inch
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
Animated roller bearing caps
SOUND-EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #00006
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate HO EMD FT A+B Set - DC/DCC/Sound - AT&SF (Freight Scheme) #100L + 100A
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate. Tru Color Paint 007 - Acrylic -Primer - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). HO 72Ft Centerbeam Flatcar w/Standard Beam - Duluth, Winnipeg & Pacific #626675
Product Information
Shipping lumber by train is easy for your HO railroad with a fleet of WaltherMainline 72Ft Centerbeam Flatcars on the job! Designed to speed loading and unloading, these bigger cars entered service in the 1980s and quickly became a favorite with shippers and customers. These nicely detailed models are based on earlier cars built with oval cut-outs (popularly known as -opera windows-) on the centerbeam to reduce overall weight, which are still in service with a wide range of railroads and lumber producers. Other features include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1980s to the present
Heavy die-cast metal underframe for excellent tracking
Correct 36inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Model loaded cars in minutes with SceneMaster Wrapped Lumber Loads (#949-3121-series, each sold separately)
HO Valley Growers Association Steel Grain Elevator - Kit
DIMENSIONS
Elevator: 4-3/8 x 6-1/2 x 11 inches (11 x 16 x 28.5cm)
Ramp: 5-1/2 x 2-1/2 x 1/2 inches (14 x 6.2 x 1.2cm)
Office: 2-3/4 x 1-1/2 x 1-1/2 inches (7 x.3.8 x 3.8cm)
Bin: 7-1/4 x 4-1/8 x 4-1/4 inches (19 x 10.5 x 10.5cm)
Rural grain elevators like the prototypes for the Walthers Cornerstone Valley Growers Association were somehow more than just a trackside industry. The elevator was, and in some place still is, the center of many rural communities. And in a few places it WAS the community. Handling grain from local farms and selling it to distant markets, many of these older buildings are still active today as stand-alone facilities or as part of larger grain and feed mill complexes that sprouted up around them. Steel elevators came into use in the 1920s as steel sheets became affordable. In fact, many wooden elevators were sheathed in steel for fire resistance. With its colorful signs and period styling, this corrugated-metal elevator is perfect for your layout and your favorite era from the 1920s to today. The kit includes the main elevator, plus a wood storage bin and wooden office, all with realistic wall textures. Separate doors and windows add to the realism, along with colorful decals for several grain companies. If your steam or diesel-era railroad hauls grain then you need the Valley Growers Association grain elevator along your line.
- Realistic corrugated-metal construction
- Includes elevator, office and trackside storage bin
- Use with other Walthers Cornerstone grain handling structures
- Easy-to-build plastic kit
- Molded in appropriate colors
HO 1975 Buick Estate Wagon - Dark Green
This wagon is perfect for North American street and highway scenes. This detailed station wagon features a die cast metal body, interior seats, window glazing and authentic decoration. Perfect for a family vacation or carting groceries around town, this station wagon sis a great addition to any 1970s and later layout scene. Late - Conrail Grey Quality Logo #888886 ATOM DCC Block Detector
The Iowa Scaled Engineering ATOM is a reliable, easy-to-install, single-channel DCC block detector. Compatible with a wide variety of other block detectors on the market, the ATOM provides two open collector outputs (one for detection, one for no detection) with optional pull-up resistors and easy pushbutton sensitivity adjustment. Since it is based on a current transformer, the detector maintains isolation between your track and signal systems.
This version has screw terminals for the power and output connections. For our friends invested in C/MRI, we offer an alternate version of the ATOM (part number CKT-BD1-CMRI) with a plug that connects directly into the C/MRI detector motherboard and provides a drop-in replacement for the DCCOD.
FEATURES:
- Isolated, current-transformer based detection for DCC
- Highly sensitive (~1mA, equivalent to a 10k ohms)
- Simple single button sensitivity adjustment
- Two opposite polarity, open-collector outputs (40V / 250mA capable)
- Optional built-in 10k output pull-up resistors
- Powered from 5V to 24V
Typical Applications:
- Detect block occupancy for signal systems
- Activate grade crossing signals
- Trigger sounds
- C/MRI track occupancy inputs
Specifications:
2.0(L) x 1.5(W) x 0.875(H) inches N Scale Union Station - Kit
Details:
American Prototype
Ornate front entrance with realistic cut-stone wall detail
Fits steam or diesel-era layouts from the 1900s and beyond
Realistic decals
realistic columns, canopies and non-working clock detail
Easy-to-build plastic kit
Molded in appropriate colors
Product Information
For generations of travelers, Union Station was the magical gateway to and from the world. The Walthers Cornerstone Union Station will be the gateway to your layout! Here is where the journeys of the finest trains on the line started and ended. Where travelers rushed to make their connections. And thousands of commuters began and ended their workday. Where space was limited in larger towns and cities, two or more railroads would often combine their resources to build and operate major terminal stations. Monuments to the power and success of railroading, they also projected the spirit of the community they served and the promise of excellent service for anyone who traveled by train.
Union Station is a fitting tribute to the grand terminals that served railroading for over 100 years. Whether your line runs heavyweights and steam, the flashy diesel streamliners of the 40s and 50s, or any of the colorful schemes and equipment of the Amtrak-era, Union Station is an ideal focal point for passenger operations. Designed to capture the look and feel of similar prototypes across America, it puts big detail in a small space without overwhelming your layout. If space is limited, it can be the focal point of operations for an entire layout. And best of all, this unique kit is based on an American prototype, so it looks right and fits perfectly without kitbashing. All the classic design elements are here, from the tall support columns to the nonworking clock on the roof. Each wall captures the look of cut-stone construction and is molded in color so painting is an option. Separate doors and windows, along with molded-in cut lines on the back of each wall simplify customizing. The large roof is neatly detailed with large skylights and numerous vents to make it more realistic. End-door canopies, realistic decals and many other details are also included.
As shown Union Station measures: 16 x 6 x 5-1/2inch (40 x 15 x 16.2cm) HO RTR SW1500 Switcher - DCC & Sound - Conrail #9619
ETA: January 2023
Detailed Information
SSW FEATURES:
SP-style lighting package with -head knocker- style Gyralight fixtures
P-3 horn
Flexicoil trucks
As-delivered configuration with footboard pilots, pilot face grab irons, early cut levers and corner frame gussets
1,100 gallon fuel tank
Full cab interior
In the first half of 1968 the Cotton Belt received their first SW1500s and they came with all the features of their SP counterparts of that era.
SW 1500 LOCOMOTIVE FEATURES:
Detailed cab interior
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Drop steps unless noted
MU stands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Exhaust stacks
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
Printed numberboards
Fine scale handrails
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc) SN2AB - N Scale Mainline Signaling Kit
N scale Mainline Signaling Kit including:
- 2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws.
- Makes all of your signals plug n play with small 10 pin connectors.
- Can be used as a basic N scale signal.
- Mounting board and hardware included.
- Current setting resistors are built in to the board.
- Easy mainline setup with A and B mast configurations.
- Pads are provided to make it easy to attach any signal to the mast base.
- This product is intended for use with the SE74.
The Digitrax Plug N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE74 signal driver cable.
This product is intended for use with the SE74 and other Digitrax signaling decoders. Spray Can - Coral Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint. Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- SP -B-70-54 Delivery 2-1970
Product: Greenville 86′ Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Southern Pacific: This B-70-54 group covers SPs first order of quad door cars that were part of the GM Stamping Pool out of Cleveland, Ohio on the B&O. The scheme, of course, is simply one of the coolest paint jobs ever applied to a Greenville 86ft boxcar. Hold this car in your hand to appreciate the nuanced differences between white stenciling and SP Lettering Gray stenciling. From the huge dark gray arrows pointing to the centered SP logo, to the smallest black door handle detail, it?s all there. The SP cars feature their as-built 1970 appearance that includes Apex crossover platforms, a Universal hand brake housing (with separate long handle!) and a Universal brake wheel. SP ordered their cars with Center-Of-Car cushioning, and we have duplicated this setup, with a complete COCC underframe and draft gear. 70-Ton Trucks with 33in wheels and rotating Timken roller bearing caps finish off this replica. These SP replicas are Ready-To-Operate in eight numbers! Acrylic Flat Colors - Desert Yellow - 3/4oz (23mL) Bottle
XF-59
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish. HO 89ft Thrall Bi-Level Auto Carrier - FEC/TTGX #156353
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation. Bi-Level Auto Racks - BNSF New Image - Orange Rack on TTGX Flat Car #TTGX 978188 N Scale Curved Track Section - 45-Degree, 8-1/2 inch Diameter (4pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go! HO 40Ft Hi-Cube Dry Containers - Maersk Line (Small Logo) (3pk)
3 pack road numbers include : MSKU 129707/130415/137673
Body: Type A
Door: Type C
Latch: Type C
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before. HO F45 - DCC/Sound - Wisconsin Central #6653
WC FEATURES:
- Purchased from Santa Fe in 1995; retired in 2001
- Operated in road service with each other and other WC power
- Details remained much the same as on Santa Fe
- WC F45s were equipped with ditch lights soon after repainting. Genesis F45 tooling does not accommodate ditch lights; however, we will include two ditch light housings and LEDS in the box for modelers to install if they wish.
ROAD NUMBER SPECIFIC FEATURES:
#6653
- Large and small Firecracker antennas
- RS3L horn
#6655
- Large and small Firecracker antennas
- P-3 horn on stand
#6656
- Small firecracker antenna
- and ATSF-style antenna stands
- RS3L horn
LOCOMOTIVE FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Coupler cut levers
- Flexible rubber MU hoses
- Flexible rubber trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Fine-scale Celcon handrails for scale appearance
- Windshield wipers
- Lift rings
- Wire grab irons
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Sander lines
- McHenry scale knuckle couplers - Kadee compatible
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED bulbs for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
- Flush mounted port hole window glass
- Flexicoil-C sideframes with high brake cylinders
- Minimum radius: 18 inches
- Recommended radius: 22 inches
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
HO 89Ft Bethlehem Flush-Deck Flatcar - Santa Fe #296640
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers HO 59Ft 4550 Cu. Ft. Cylindrical Covered Hopper - Trough Hatch - Santa Fe (ex-Koppel) #317649
National Steel Car Co. 59Ft, 4550 Cu. Ft. Cylindrical Covered Hopper - Trough Hatch
The car is commonly referred to as the -Canadian grain car-. Between 1972 and 1985 almost 20,000 cars were built for the Canadian government to assist the Canadian railways in transporting vast quantities of grain. Canadian National, Canadian Pacific, and other companies own or lease this type of car.
The trough hatch cars feature road name specific parallel ribbed roof hatches, diagonal ribbed -zig-zag- roof hatches, or smooth flat hatches as per the prototype. All cars feature numerous wire details, etched metal roof walks, laser sharp painting and lettering, accurate colors, 100 ton trucks with 36inch metal wheelsets, and metal knuckle couplers. HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) #484643
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme HO ACF 4600 3-Bay Centerflow Hopper - C&NW #180053
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #242
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
HO Assembled #148 Whisker Metal Couplers - Medium (9/32 inch) Centerset Shank (2pair)
The #148 Whisker Metal Coupler will work anywhere a NO.5 Coupler will work.
This industry leading coupler features an all metal coupler head, shank, and Whisker centering spring and comes complete with insulated draft gearbox and lid. The #148 Magne-Matic Whiske Metal Coupler may be mounted with the included #242 Snap-Together Gearbox or with other manufacturers cast-on coupler pockets.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #28 coupler.
Package Includes:
(2) Pair Assembled #148 Whisker Metal Couplers in #242 Gearboxes
(2) Extra #622 Knuckle Springs
#148 Whisker Metal Coupler Features:
Material - Metal
Shank Length - Medium (9/32inch) (center hole to back of coupler head)
Coupler Offset - Centerset
Knuckle Spring - #622
Centering System - Whisker
Head - Standard Head
#242 Snap-Together Gearbox Features:
Material - Insulated Plastic
Lid Type - Snap-Together
Dimensions - 7/16L x 5/16W x 1/8H inch
HO EMD GP40 - DCC & Sound - MKT (Green & Yellow) #216
1982+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO 53ft Jindo Container - EMP ex-FEC Set #2 (3pk)
(#968402, 968423, 968437) (BLUE/YELLOW)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting HO 13,600 Gallon Acid Tank Car - Union Tank Car/Black (UTLX) (3pkg)
ETA: July 2023
Road Numbers: 13848, 13877, 13880
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track N Code 70 Bridge Flex Track HO - 3D Stack Of Presents (4/Pkg) HO 40Ft PS-1 Boxcar - Port Huron & Detroit #1158
Date: BK 7-62
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch HO 1937 AAR 40Ft Boxcar - Round Corner Ends - New York Central (NYC Green) #157247
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme HO 1.5 Amp Premium Decoder w/Digitrax Easy Connect 9 Pin to DCC Medium Plug - 1.0 inch Harness
- .672 x 1.074 x .259 inch
- 17.08mm x 27.28mm x 6.6mm
- Digitrax Easy Connect 9 Pin Harness
- 1.5 Amp/2 Amp Peak Current Rating
- 6 FX3 Functions, 0.5 Amp Total Function Current Rating
▪ FX3 Function outputs for prototypical lighting effects and on/off control:
- Constant Brightness Lighting with directional or independent control.
- Realistic Effects like Ditch lights, Mars lights, strobes, and many more
- FX3 & Standard Function Qualifiers operate functions based on direction,
- F0 on or off, direction and F0, and whether loco is moving.
- FX3 effects optimized for selectable LED or lamp operation
- Configurable FX3 Pulse Function available on all function outputs.
- Function Remapping for custom function setup.
- Master Light Switch turns off all lights & functions with one keystroke.
- Advanced Consist Function Controls
▪ Digitrax LocoMotion® System-Your locomotives look like the real thing.
- The Digitrax LocoMotion System makes them run like the real thing, too!
- Torque Compensation for smooth as silk silent operation.
- 128 Speed Step operation (14 or 28 steps can also be used).
- Momentum with acceleration and deceleration.
- Normal Direction of Travel is user selectable.
- Switching Speed feature for easier and faster access to yard speeds.
- 3 Step Speed Tables set start, mid and max voltage for custom control.
- 28 Step Speed Tables with 256 level resolution for precise control.
▪ Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.
▪ Series 6 Decoder Features.
▪ 2 Digit and 4 Digit Addressing.
▪ Basic, Advanced & Universal Consisting.
▪ SuperSonic motor drive for silent operation.
▪ Scaleable Speed Stabilization ( Back EMF) for smooth operations.
▪ Direct mode programming.
▪ Decoder Reset CV with or without speed table reset.
▪ Transponder Equipped ready for transponding on your Layout.
▪ Motor Isolation Protection helps prevent damage to your decoder.
▪ DCC Compatible.
▪ FCC Part 15, Class B RFI compliant.
HO EMD GP7 - DCC & Sound - Maine Central MEC #563
Detailed Information
MEC FEATURES:
Winterization hatch
Full sill skirts
Nose-mounted bell
Tall MU stands
Maine Central continued the process of dieselization of their freight operations in Fall 1950 and 1953 with the purchase of 9 EMD GP7 locomotives equipped with dynamic brakes. We are offering these units in MECs -simplified- green paint scheme for the first time in our Genesis product line.
ROAD NUMBER SPECIFIC FEATURES:
#563
Unique MEC logo on front and rear ? New color formulation of gold color based on input from MEC modelers
#564
-Simplified- green paint scheme
#566
-Simplified- green paint scheme
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control Brown 1/16inch 1.5mm Fibers, 3-1/2oz 100g
Model more realistic grass in minutes in any scale
Great for lawns, farm fields, railroad and highway right-of-way and more
Six realistic colors - made exclusively for Walthers by Noch
Easily applied with Noch Static Grass Applicators, Grass Dispenser Bottle or Gras-Master 2.0 (each sold separately)
3-1/2 Ounce 100g reclosable plastic bags HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4573
5inch stripe w/water expansion tank, no ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127420
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs HO ET44 Tier 4 - DCC & Sound - CN Heritage/Illinois Central #3008
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units. Tru Color Paint - Acrylic - Burlington Red - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). Pan Head Screws 1/72 x 1/8inch
Steel Pan Head Slotted Machine Screw 1-72 x 1/8inch, 10 pcs
Screws are fully threaded. Length is measured from under the head.
HO Modern Sectional House with Garage - Kit
Product Information
Perfect for first-time HO home buyers or empty-nesters, the Modern Sectional House with Garage kit is a great addition to modern-era layouts! Featuring two complete structure kits designed for easy construction, the finished models are complete with:
Perfect HO home set with two complete structure kits
Typical of factory-built homes seen all across North America
Must-have for modern layouts
Use as stand-alone home or as part of an entire neighborhood
House includes two nonworking porch lights, electric and gas meters, high-efficiency furnace inlet and outlet pipes, front window shutters and two styles of doors
Garage can be built with one large or two small overhead doors
Detailed wall framing inside garage
Both structures molded in three matching colors
Measures: House - 6-7/8 x 3-5/16 x 2inch 17.5 x 8.4 x 5.2cm Garage - 3-1/8 x 3-1/8 x 2inch 7.9 x 7.9 x 5cm (over eaves) HO Code 83 Ladder Track System Turnout - #5b Left Hand Curved Diverging Track
This unique system of five different #5 turnouts allows you to make more compact yards in a given space. The system includes curved diverging track turnouts, which allow a higher ladder track angle, several lapped turnouts and a standard #5 turnout.
Turnouts feature nickel silver rail, brown ties and cast-metal frogs. Forest Green
Models tree foliage for medium to large trees and low-to-medium ground covers, such as bushes, trees and shrubs. Use for any scale, colorfast and blends with other foliage.
Available in six realistic colors and great for making small trees too! Each package includes 32 oz volume of material. Underbrush works well for medium ground cover or undergrowth. It blends with our Foliage, Field Grass and Turf products.
1. Apply Scenic Glue (S190) to layout.
2. Press Underbrush into glue and allow to dry. HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15433
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate HO EMD F7A/F7A Set - DCC & Sound - Wabash #1169-A/#1189
Detailed Information
WAB FEATURES:
F7 Phase I
No dynamic brakes
Dual single-note air horns (A-units)
Passenger pilot
Cooling coils on roof
Wabash units 1158-1189 were delivered in 1951-52. In the 1960s, they were renumbered into the 600-726 series. Wabash 1189 has been preserved and is currently operational at a railroad museum in Illinois.
ROAD NUMBER SPECIFIC FEATURES:
#625
Nose MU connection
cut skirts
#631
Nose MU connection
cut skirts
#1169-A
Full Skirt
#1189
Full Skirt
F-UNIT SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Windshield wipers
Lift rings
Wire grab irons
Sanding lines
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Directional constant lighting
Headlight brightness remains constant
Separately-applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes & retention tanks
Speed recorder unless noted
See-through cab windows and full cab interior
Etched metal fan grilles
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Individual sound boards installed in both A and B units (sound units only)
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA-compatible in DCC mode
Excellent low-speed operation
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Lighting effects such as beacons, Gyralight where prototypically accurate
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box HO Gunderson Multi-Max Auto Rack - Canadian Pacific (Beaver) #697886
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering GLa 2-Bay Hopper: New York, Ontario & Western #1312
Detail Variations:
Single Car
As operated from 1933 to the 1953
Features:
All-new tooling
Scaled from original blueprints
Die cast frame and floor for optimum weight
Full interior rivet and bracing details
Factory installed wire grab irons
K- or AB-brake gear installed as appropriate
Factory installed Kadee #158 couplers in narrow draft gear box
Turned metal wheels in correct PRR 12D-F8 trucks
Accurate paint and lettering
Multiple road numbers available for each paint scheme and railroad
HO RTR PS 4740 Covered Hopper - CATX #5020
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Body-mounted McHenry operating scale knuckle couplers
36inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Multi-packs feature unique road numbers
Weighted for optimum performance
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch N Scale AutoScenes - Billy Browns Coupe
Billy Brown takes a spin in his pride and joy!
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:160 N scale models.
Figures included as shown. HO Enterprise 2-Bay Covered Hopper - GFCX #134
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Early CWSX #140047
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate EP-5 Electric Loco - DCC & Sound - Penn Central, Black #4975
Detail Variations:
With Vents
HO Model Features:
Accurately scaled from prototype blueprints
Period-correct detail options, including carbody, pantograph and hardware variations
Accurate paint and lettering
Several road numbers per paint scheme (where applicable)
Full cab interior
New Haven delivery and repaint schemes (repainted units have smaller NH logo on nose and re-positioned/larger nose road number)
Directional operating pantographs (sound models only)
DC/Silent or DC/DCC/Sound versions available
DC/DCC/Sound version features an ESU Loksound decoder with accurate -Jet- recordings
Complete lighting package including headlights, class lights, ground lights and cab interior lighting
Factory-installed MacDonald-Cartier metal couplers HO EMD SW9 - DC/ Silent - Generic Industrial Yellow - Unlettered
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor HO USRA Single-Sheathed Boxcar: D&H
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels HO Bathtub Coal Gondola - MWCX (ex-CP) #100429
Built: 3-06
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch 60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- TTX
Trailer Train 60ft Pullman-Standard bulkhead flatcar #92333
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0018
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
- Flexicoil Trucks
The HO Scale Rapido SW1200 features:
- Designed from original blueprints and field measurements
- Heavy diecast frame, chassis and gearboxes for superior pulling power
- Rapidos renowned silky smooth-running drive system
- Working cab interior light and inspection lights
- Fully detailed Type A or Flexicoil trucks, as appropriate
- Full cab interior with working cab interior light and non-working fire extinguisher and fridge (where appropriate)
- Working headlights and illuminated number boards at both ends
- Some models have a rotary beacon or flasher/strobe as appropriate
- Separate handrails, including crash bars inside the cab
- Multiple exhaust stack and battery box door styles
- With or without working drop steps, as appropriate
- Incredible underbody piping and conduit detail - a Rapido hallmark!
- DC/Silent or DC/DCC/Sound versions featuring an ESU LokSound decoder with accurate recordings from a 567 prime mover
HO Scale Grumman LLV Delivery Truck Kit
This kit features a resin body, cast pewter frame and details, etched stainless steel doors and mirrors, water-slide decals, laser cut glazing and detailed instructions. The doors can be positioned opened or closed. To avoid any issues, the decals have been modified to be more generic as is pictured here. Detailed instructions can be viewed by visiting the Showcaseminiatures.net website Tru Color Paint - Acrylic - Clear Gloss - 2oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (Two-Tone Gray) #7023
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box HO GE Dash 9-44CW - DCC & Sound - Burlington Northern Santa Fe (BNSF Heritage I) #1044
BNSF FEATURES:
High-mounted number boards
K3 horn
Front ditch lights
ATSF -Gullwing- cab
Standard brass bell
Part of the first new BNSF locomotive order to be painted in the then new official corporate colors, these -Heritage- GE units became affectionately known by railfans as -Pumpkins- based upon the Great Northern colors used on some early diesels. Some are still running today in this scheme.
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box HO 50ft FMC Combo Door Boxcar - Railbox/ABOX #51963
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Weighted for optimum performance
- Minimum radius: 18 inches
- Body-mounted, McHenry operating scale knuckle couplers
- Fully assembled and ready for your layout
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust Edge Connector for Tortoise(TM) Switch Machine w/Green PC Board (2pk)
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include servo-based slow-motion Switch Machines, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
Designed to simplify converting your existing Tortoise(TM) Switch Machine, the Edge Connector features:
- Plug and play wiring for Tortoise(TM) Switch Machines manufactured before June 2020 with smaller, tan PC board (sold separately).
- Includes 6 inch motor connection cable with plug for direct connection to Stall Motor Controller 942-161 (sold separately).
HO 57ft Mechanical Reefer - Union Pacific/ARMN #756036
Move all kinds of perishable products on your HO railroad with Walthers Mainline 57ft Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s.
Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including:
-Limited edition - one time run of these roadnumbers
-Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
-Keystone or Hydra-Cushion underframe detail as appropriate
-Short ladders and low hand brakes
-9ft Youngstown plug door with separate latch bars
-Authentic Stanray peaked, ribbed roof with capped exhaust stack
-Detailed underbody with brake gear and fuel tanks
-70-ton roller bearing trucks
-Correct 33in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
Adjustable Stick-On Weights - 2oz HO EMD GP40 - DCC & Sound - Wisconsin Central #3011
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO GP7 - DCC & Sound - Bangor And Aroostook #63
BAR FEATURES:
- Winterization hatch
- Bell mounted on short hood
- Sloped pilots with footboards
- Large fuel tanks
- Square MU boxes with pipe bases and dual receptacles
BAR was an early supporter of EMDs road switcher concept, purchasing 12 GP7s in late 1949 and another 4 in 1952. Starting in the early 1960s, the units were repainted in a simplified solid blue scheme. The former BAR 73 was selected in 1975 to receive a colorful scheme of red, white, and blue to commemorate the nations Bicentennial. The unit carried the name Jeremiah OBrien, a Maine patriot, and a new number, 1776. The BAR GP7s were true travelers, being leased to the PRR starting in 1951 to assist with summer ore traffic, an agreement which lasted through the Penn Central era. They were also leased to the LV and LIRR to assist with power shortages on those roads.
LOCOMOTIVE FEATURES:
- Coupler cut levers
- Trainline and MU hoses
- Drop steps unless noted
- MU stands
- Nub style walkway tread
- Windshield wiper
- Lift rings
- Wire grab irons
- Windshield wipers
- Sander lines
- Bell placement & type per prototype
- Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
- Blomberg-B trucks with appropriate bearing caps
- Speed recorder unless noted
- See-through cab windows and full cab interior
- Fine-scale Celcon handrails for scale appearance
- Etched metal radiator intake grilles and fan grilles
- Air tanks mounted below sill unless noted
- Body-mounted McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18inch
SOUND EQUIPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes Conifer Tree Value Pack - Ready Made Trees
4 - 6inch 10 - 15cm Tall pkg(24)
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors. Great Lakes Ore Boat Kit - Unpainted and Resin Cast HO Curved Track - 22.5 Degrees - 16-7/8 Inch Radius (4pk)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes. Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation! Suitable for all types of layouts, whether temporary or permanent. This modular track system features an integrally molded roadbed for realistic appearance. Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections. HO GP38-2 - DCC Ready - Grand Trunk Western (GTW) #5856
Detailed Information
GTW FEATURES:
Ex-Rock Island
Mid/Late Phase
Large anticlimber
3600 gallon fuel tank
Xenon Strobe
M-3 Horn
Small EMD front plow
Blomberg B trucks
Firecracker antenna
88inch Nose with removed class lights
After the demise of the Rock Island in 1980 many of their locomotives were sold to other railroads. The GTW purchased some of these GP38-2s and painted them into this catchy red and blue scheme. Our models represent the pre-ditch light era.
ROAD NUMBER SPECIFIC FEATURES:
#5853
Large GT logo
Long hood mounted horn
White Xenon beacon (operational with DCC)
All-weather window
#5861
Large GT logo
Long hood mounted horn
White Xenon beacon (operational with DCC)
All-weather window
#5856
OLS with small GT logo
Cab mounted horn
White Xenon beacon (operational with DCC)
All-weather window
GP38-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO Dash 8-40CM - DCC & Sound - Canadian National: Website #2400
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height Kit
Includes 50 Feet of ladder, ladder brackets and level gauge UT6D - Duplex Radio Utility Throttle
FEATURES:
-Works with compatible LocoNet Systems
-Compact size for easy one-handed operation
-Color 1.5 inch LCD Display Screen
-Full numeric keys for easy locomotive selection
-Fine speed control with encoder knob
-Forward/Reverse toggle switch with braking
-On/Off Switch, uses AA or BP600MH batteries
-2 or 4 Digit Locomotive decoder access, provide over
-9,000 loco addresses
-29 Functions
-Digitrax Infrared operation with UR90/91/92
-Duplex wireless with UR93/92
-Duplex Scanner and Duplex settings editor
-Over 2000 turnout decoder addresses
-Locomotive Recall feature
-Convenient Throttle Option Setup
-Detachable LocoNet cable and Lanyard
-Replaces the UT4
HO Farm Combine w/Grain & Corn Heads - Kit
Product Information
Put this easy-to-build Walthers SceneMaster vehicle kit to work along your HO layout! Perfect for any farm scene, the detailed model includes complete instructions and features:
Designed for easy assembly - illustrated step-by-step instructions
Highly detailed to bring HO layouts to life
Build with your choice of corn or grain heads - both included
Use with SceneMaster Harvest Corn (949-1141) or Wheat Fields (949-1143, both sold separately)
Adaptable as load for flatcar or truck
Includes trailer for head transport
Positonable parts for added realism
Molded in two colors and clear plastic
Photo shows assembled model. HO 1980 Volvo N 10 Dump Truck - Assembled - Mint Green, Gray
This HO Scale 1980 Volvo N 10 Dump Truck by Brekina is based on the workhorse tipper-style dump truck used in North America and worldwide. This detailed model features an injection-molded plastic body with fine decoration, interior seats, window glazing and chrome-plated parts as appropriate. Athearn HO Scale - RTR 30,000 Gallon Ethanol Tank Car - CHSX - #255010
Detailed Information
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in HO Bathtub Coal Gondola - DREX (ex-Procor) #104061
Built: 5-05
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch HO Modern Water Tower - Kit
Product Information
The prototypes for the Walthers Cornerstone HO Scale Modern Water Tower are landmarks in small towns, big cities and at factories. In use since the 1960s, steel Water Towers like these are common sights today. In use, water towers like this maintain a constant pressure in the underground supply pipelines during periods of peak demand. Because theyre usually the first thing visitors see, most have the village or business name on the side. Some are also adorned with the state, town slogan or logo, and occasionally, a big happy face. This easy-to-build plastic kit features a body with realistic weld lines, plus a service door entrance and overflow pipe at the base. Decals for three different town names and more are also included. The Modern Water Tower is one of a wide variety of Cornerstone HO Scale industrial buildings.
A landmark in small towns and big cities
Great for 1960s and later layouts
Easy-to-build plastic kit
Authentic overflow pipe, access doorway and non-working top warning light
Includes city name decals
As shown the Modern Water Tower kit measures: 9-1/2inch (23.7cm) Tall x 3-1/8inch (7.8cm) Diameter HO SP 3/4 Dome-Lounge w/Flat Sides - Amtrak (Phase 1) #9372
-Overland Style
Rapidos SP Dome Lounge Cars Features:
Designed from original blueprints and field measurements of existing cars
Two fully-detailed interior configurations
Multi-colour interior decoration
Two underbody arrangements
Accurate interior and exterior paint and decoration
Full flicker-free track-powered interior lighting
Lighting (prototypically) in the dome roof
Accurate free-rolling trucks
Metal magnetic knuckle couplers .040in x .375in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
6in x 12in SHEET HO EMD SD10 - DCC & Sound - Milwaukee Road #546
Milwaukee Road
- SD10 model designation given by Milwaukee Road for their capital rebuild program of their old SD7s and SD9s
- A first in HO Scale plastic models
- Single fuel tank
Chopped short hood and modified cab
- Later style Horst air intake
- Rotary beacon
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more! HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Big Sky Blue) #5177
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme Output: 24V AC 1000mA
Powers up to 50 lights and connects to Just Plug Light Hub or Expansion Hub, each sold separately. HO Scale GP38 - DC/DCC Ready - Santa Fe (Yellow Warbonnet w/o Class Lights) #2346
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO Dash 9-44CW - DCC/Sound - UP #9696
UP FEATURES:
- Patched and renumbered former CNW units
- Patch, logo placement, and burn marks per prototype road #
- Nathan K3LA horn
- Primered replacement engine compartment doors
ROAD NUMBER SPECIFIC FEATURES:
#9675
- Primered replacement air conditioner
- replacement equipment door from a UP-painted loco, medium-height snowplow
#9696
- UP logos on sides of nose
- burn marks on engine compartment
- ghost outline of original CNW road number (8632)
- large snowplow
#9741
- UP logos on side equipment doors
- medium snowplow
- lasted in CNW paint until at least 2018
DASH 9-44CW SERIES LOCOMOTIVE FEATURES:
- Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
- Etched, see-through walkway steps
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - Conrail
#53870
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers. Dust Effects & White Spirit Enamel Paint Set -011, 015, 022
35ml X 3 jars per set HO PC&F 5241 CUFT - Boxcar - BKTY Patch 2 (UP) - Single Car #153475
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme HO 60ft Hi-Cube Plate F Boxcar - BNSF #761192
Bring your freight car fleet up to date in minutes with the Walthers Mainline(R) 60ft Hi-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft Hi-Cube Plate F Boxcar include:
-Limited edition - one time run of these roadnumbers
-Prototypes now in service with TTX and several railroads
-Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
-Prototypically correct roof with both X and diagonal panels
-Separately applied latch bars
-Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
-100-ton roller bearing trucks
-36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
Product Information
Serve a wide range of HO industries with the 37ft 2980 Cubic-Foot Two-Bay Covered Hoppers from WalthersMainline. Based on prototypes introduced in the late 1980s, they can be found hauling cement, fracking sand, roofing granules and similar loads. Features of the layout-ready models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from late 1980s to the present
Separately molded and applied hopper gates
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately Kitty Korner
What downtown area would be complete without a gentleman s club? Kit includes full-color signs and complete painting and aging instructions. Guaranteed to be an attention getter!
Cast Hydrocal plaster walls, plastic door & windows and full color paper signs and awnings.
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
HO RTR 70 Ton 2 Ballast Hopper w/ Side Chutes - Conrail #53818
Blt. 6-53
Product Information
Perfect for work train service on our railroad, Bowser HO Scale ready-to-run 70-Ton 2-Bay Ballast Hoppers with Side Chutes (Ballast Gates) feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make these 70-Ton Ballast Hoppers welcome additions to any diesel-era freight train consist. HO Code 83 Ladder Track System Turnout - #5e Right Hand Last Ladder
This unique system of five different #5 turnouts allows you to make more compact yards in a given space. The system includes curved diverging track turnouts, which allow a higher ladder track angle, several lapped turnouts and a standard #5 turnout.
Turnouts feature nickel silver rail, brown ties and cast-metal frogs. HO Scale - GATC 2600 Airslide Hopper - GATX #47066
Detailed Information
MODEL FEATURES:
Genesis models include:
Cars include railroad and roadnumber specific detail
Models also feature Genesis details cut levers and train line hoses
Early GATC Airslide body: no angled end gusset plates; channel-section vertical posts at bolsters
Detailed underbody including outlet piping
Rectangular or oval shaker brackets
Gravity or gravity-pneumatic outlets
See through metal roof walk
Factory installed wire grab irons and brake piping
Separately applied round roof hatches and brake wheel
Bettendorf or Roller bearing trucks with animated spinning roller bearing caps
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Machined metal wheels
Weighted for trouble free operation
33inch machined metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch HO Cattails (60 pack)
Low spots and swampy areas are easy to model with the SceneMaster Cattails in HO! Perfect along railroads and highways, theyre a must-have detail by any stream, creek, pond or lake shore too. Designed for easy assembly and installation in new or existing scenes, the set includes 60 cattails molded in color. HO Bi-Level Auto Rack - Norfolk Southern/TTGX Flat Car #973881
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO 89ft Thrall Enclosed Tri-Level Auto Carrier - Norfolk Southern/ETTX Flat #33488/700392
Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these Walthers Proto models! Introduced in the mid-1970s especially to carry automobiles, the prototypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89ft flatcars with sidesill cut-outs and 28in wheels for added clearance. In service all across North America, the racks carry the owners logos, and most ride on flatcars leased from TTX with ETTX reporting marks.
A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
-Limited edition - one time run of these numbers!
-Prototypes in service from the 1970s to the present
-Factory-installed grab irons
-Separately molded and applied side ladders
-Ultra-smooth rolling metal axles with correct 28in wheels
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24in radius is recommended for operation.
HO 53ft Railgon Gondola - Railgon/GONX #310570
(as-built; black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Value Line RTR - 13 Panel Coalporter - Conrail #503061
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended. HO GE Dash 9-44CW - DCC & Sound - Canadian National CN #2522
CN FEATURES:
Canadian 4-window cab with high-mounted number boards
K3 horn
Front ditch lights
Front class lights
Rear single style headlight
Cab-mounted brass bell
Canadian National purchased 23 safety cab Dash 9 locomotives from GE in late 1994. Classed as -C44-9WL-, these locomotives were seen all over the system and featured a 4-window Canadian style cab, front and rear anticlimbers, and single rear headlight.
ROAD NUMBER SPECIFIC FEATURES:
#2506 Later appearance with right side yellow number board numbers and missing left side -American Continent- map art
#2510 As-delivered appearance
#2522 As-delivered appearance
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box Sequencing Light Hub
Bring your layout to life with a Sequencing Light Hub. Add up to four Just Plug lights that individually sequence on and off. Includes dimmer and speed controls. Turn sequencing off to use as a Light Hub. Add an optional Auxiliary Switch for convenient operation. HO 19,600 Gallon Tank Car - Tate & Lyle #51007
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Date: BLT 3-98 HO 40ft ACF Modernized Welded Boxcar - Penn Central #138166
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers Atlas - N Scale GP-9 TT - Gold DCC Sound - Toronto Hamilton & Buffalo #403
Features:
Powered low friction drive
Blackened metal wheels
Dual brass flywheels
Directional lighting
Golden-white LEDs
AccuMate couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
AccuMate couplers are made under license from AccuRail, Inc HO/N Flexible Herringbone Dark Red Brick Sheet (2-Pack) - Small
Product Information
The Chooch Enterprises Flexible Brick Wall Sheet is hand cast in super-detailed flexible vinyl. Easy to use, each pack comes with peel and stick permanent adhesive, which adheres to any flat, smooth surface. Thin material is easy to cut with a No. 11 blade or scissors. Brick sheets are painted in a base wash of color. Use the sheets right out of the package or paint with water-based acrylics. Each sheet measures 3-3/4 x 12inch 9.5 x 30.5cm. Three sizes of sheets are available with this texture: Small for N and HO Scales; Medium for HO Scale; and Large for HO, S and O Scales. Flexible Brick Wall Sheet 2-Packs are part of the extensive line of Chooch flexible walls and paving sheets.
EMD GP9 Phase II, High Short Hood - Standard DC - Soo Line #2412
(white, red, black)
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today.
Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21-pin DCC plug
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
Based on units in service from the 1960s to 1980s with:
Leslie S-2M and single chime air horns
Firecracker radio antenna
Working Pyle-National beacon
Short-hood forward operation
Pyle late dual sealed beam headlights
Super non-lifting type spark arrestors
Winterization hatch HO Windmill - Built & Ready Landmark Structures
Assembled - 3-5/8 x 1-3/4 inches 9.2 x 4.5cm Lichen - Dark Green Mix (173 in3)
This natural product is a longtime favorite of hobbyists. Its unique texture realistically blends easily with other foliages. It is non-toxic, non-flammable, and hygroscopic.
Use for any scale to model bushes, moss and other ground cover, or use as tree foliage to model quick and economical tree masses. Lichen is available in five solid colors and three mixes. Attach to Tree Armatures with Hob-e-Tac(R). Attach to layout with Scenic Glue(TM). HO GP9 - DCC & Sound - Great Northern #682
ETA: May 2023
Detailed Information
GN FEATURES:
Winterization hatch with horn mounted on top
Long hood-forward operation
-Nail- style antenna
GN style fuel tank skirts
In 1967, Great Northern introduced a new paint scheme, consisting of blue, white, and dark grey-green. Known as the Big Sky Blue scheme, it took its name from an unofficial nickname for the state of Montana. Several of GNs GP9 locos received the treatment as depicted here.
In 1970, GN was merged with the other Hill roads to form Burlington northern; however, the Big Sky Blue painted units survived for some time after with a simple BN patch.
ROAD NUMBER SPECIFIC FEATURES:
#682
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#683
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#688
Dynamic brakes
bell mounted on long hood
#690
Dynamic brakes
bell mounted on long hood
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20084
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Norfolk & Western Rack & Flatcar #412024
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers HO Rivoli Theatre - Kit
DIMENSIONS:
6-1/8 x 9-3/4 x 7-1/2 inches (15.3 x 24.3 x 18.7cm)
FEATURES:
- Perfect for your layouts Main Street
- Brick exterior with Art Deco facade
- Realistic colorful graphics for signboard, window displays and marquee
- Fits steam or diesel eras
- Easy-to-build plastic kit
- Molded in four colors plus clear glazing
Rustic Cabin
These preassembled, hand-painted and fully detailed structures are great for for detailing country scence in just a few minutes.
Woodland Scenics HO Scale Rustic Cabin is based on a getaway in the woods or a disheveled shanty on the wrong side of the tracks. This fully assembled building features old board and batten siding, a covered porch and shake shingle roof. Two rocking chairs on the porch provide a convenient location to watch a sunrise, and a milk can sits off to the side. Additional features include a pile of wood to prepare for cold nights, a wood stove pipe, a bent TV antenna, and an electric meter on the back of the cabin. The Rustic Cabin also has a Just Plug(TM) LED porch light for extra realism. Check out the entire line of Woodland Scenics HO Scale Built-&-Ready Landmark Houses.
HO Trinity 3-Bay Hopper - CAGX (3pk) #1
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust HO NSC Ballast Hopper - Canadian National (Maintenance Scheme) #302241
1976+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale Craft Plywood Sheet - 12 x 24inch x 1/2inch Thick - Single Piece
Perfect for painting, staining, stenciling and wood burning
Cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use
1/2inch (1.27cm) Thick x 12 x 24inch (30.4 x 60.9cm)
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov N Scale NSC 5277 50Ft Plug-Door Boxcar - Canadian National CNIS #413039
MASTER MODEL FEATURES:
Bodies: 5111 or 5277 cubic foot styles
Ends: Nine or ten corrugations
Painted safety rails
Doors: 9ft or 10ft plug doors
Side Sills: Deep or shallow sills
Trucks: 70- or 100-ton
Tangent Scale Models HOICC I-18 Steel Bay Window Caboose, Chessie System (B&O)
Product: ICC B&O I-18 Steel Bay Window Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Gould Caboose Roller Bearing with separate brake beam part
Wheels: CNC-Machined 33inch Wheels
DC/DCC Lighting Features: Interior lights (dim!), Scale-size Pyle lanterns
Baltimore & Ohio (B&O) Blue Simplified 1969+ represents a full B&O Blue repaint by the DuBois Shops in July of 1969. This simplified scheme example does not have the familiar -B&O- above the bay window. If you look closely, notice the B&O applied the modernized version of the Capitol Dome logo along with an ACI label. While the Chessie-era I-18s get so much attention with the various paint schemes, we like to shine a light on the subtle yet interesting blue repaints as well! Lighting features on this model include prototypically dim interior lights and lit Pyle lanterns. HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21173
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate HO CA-8 Early Caboose w/Lights w/DCC & Sound - Union Pacific #25578
ETA: August 2021
Detailed Information
Union Pacific CA-8 Caboose FEATURES:
Caboose trucks with swing arms, friction or animated roller bearing bearing caps as prototype appropriate
Various safety slogans, in both early banner style with green lettering and late vinyl decal with special graphics
Sliding cupola side windows
Cupola-mounted marker lights when appropriate
25576 is offered in an early CA-8 Pool service configuration HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23074
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate N Scale 50Ft Boxcar - GATX (BKTY) #151172
Built in 1977 by FMC for Hartford & Slocomb Railroad, these 50Ft boxcars with Barber Roller Bearing trucks were later operated by the New Orleans Public Belt. Eventually, Union Pacific received the cars and painted them in their boxcar red scheme, with ex-Missouri-Kansas-Texas -BKTY- reporting mark and GATX lettering. N Scale CV-1 Compact Oval Set
Complete oval with 8 pieces of 6 inch curves and 4 pieces of 124mm (4 7/8 inches) straight pieces.
Includes a rerailer and feeder track. HO AutoFlood III RD Coal Hopper - CEFX (6pk) #3
Includes the following numbers, all individually packaged:
#600600
#600612
#600626
#600644
#600568
#600673
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low profile? Barber S-2-A with Timken rotating caps
Wheels: CNC-Machined 36in Wheels
Detroit Toledo & Ironton (DTI) Delivery 1970 Magenta shows off one of the most-requested paint schemes for the Tangent Greenville 86ft Box Car System. We appreciate the patience of DT&I modelers, as we wanted to get this car right with the correct 1970 Greenville body with accurate DT&I Magenta paint and lettering. This Magenta DT&I group totaled 54 cars ? It was also the first group to be delivered for use in the new Ford Brownstown Parts Distribution facility pool. Yes, these cars were pooled, so that means these beautiful Magenta 86ft giants served Ford US Parts Depots coast to coast in the Ford BRO pool lanes. Note the prototype photo on our website that shows a DT&I BRO car behind a GN painted, BN-restenciled SD45 presumably photographed on BN headed to Seattle. The DT&I cars feature the distinctive Brownstown body style, with extra vertical rivet rows at the ends of the side sheets. An accurate End-Of-Car Cushioning underframe shows off the 100-Ton Low profile Barber S-2-A trucks, 36in wheels and Timken rotating caps. Perfect for moving bulk loads of all kinds that dont require protection from the weather, the WalthersMainline 34ft 100-Ton Two-Bay Hopper is a versatile addition to HO operations!
One time run of these road numbers, order now - limited quantity available!
In service from the 1970s to the present
Used to haul ballast, sand, gravel, ore and other bulk loads
Factory-applied door and brake details
Heavy die-cast metal underframe
Add a realistic load in minutes with the cast resin Chooch Gravel Load (214-7292) sold separately
Correct 36in RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers HO Waterslide Decals - Cargill 50ft Freight/Tank Cars - Corn Syrup HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1757
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
1/24 Scale - SCX24 RTR 2021 Ford Bronco 4WD Truck Brushed - Red
Axial reaches a new peak in 1/24 scale realism with this officially licensed Ford Bronco 4WD that tops the proven SCX24 platform with a highly detailed ABS hard body. Ideal for indoor or outdoor trails, its a must for Ford fans and RC enthusiasts of all ages!
- Factory-assembled and ready-to-run, with 3-channel radio, 030 brushed motor, servo, ESC/receiver unit and AA transmitter batteries included
- Officially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tire
- Bonus second decal sheet for optional customization
- Nitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheels
- Working lights in front, with molded lenses on all four corners of the body
In The Box:
(1) Axial SCX24 Ford Bronco 1/24 Scale 4WD RTR
(1) Horizon Hobby 2.4GHz 3-Channel Radio System
(1) Axial AS-1 Micro Servo
(1) Horizon Hobby ESC/Receiver Combo
(1) Dynamite USB LiPo Charger
(1) Dynamite 88T 030-Size Brushed Electric Motor With Pinion
(1) Dynamite 350mAh 2S 30C 7.4V LiPo Battery
(4) AA Batteries for Transmitter
(2) Decal Sheets
(1) Product Manual
Needed to Complete:
Nothing ? everything is included in the box! HO Steel Railroad Bridge Tower - Kit
Product Information
Walthers Cornerstone Steel Railroad Bridge Towers are just the thing for constructing impressive steel viaducts on your layout. This kit includes parts for a tower used for supporting deck girder bridges of varying lengths. Bridge Towers are easily cut to different heights.
Add realism to your HO railroad with the Cornerstone Engineered Bridge System!
Part of the Cornerstone Engineered Bridge System.
Common prototype design used with various types of bridges
Fits steam, diesel and modern-eras
Highly detailed parts
Easily cut to three different heights
Two sizes of concrete pedestals included
Use with Cornerstone Standard 30Ft, 50Ft and 70Ft Deck Girder Bridges (each sold separately) to model a continuous viaduct
Assembled model measures:
Length: 4-7/16inch (11.3cm)
Width at Base: 4-1/2inch (11.4cm)
Width at Top: 1-13/64inch (3cm)
Height: 10inch (25.4cm)
Footings Large: 29/32inch (2.5cm)
Tall Small: 1/2inch (1.5cm Tall)
Photo shows a typical viaduct modeled with Steel Railroad Bridge Tower Bent 2-Pack (#933-4555), 30Ft Standard Level Single-Track Railroad Deck Girder Bridge (#933-4505) and 70Ft Standard Level Single-Track Railroad Deck Girder Bridge (#933-4507), each sold separately HO Operating Ground Throw Kit - High Level Switch Stand .190inch Travel Sprung w/Lantern & Targets
Easy Manual Turnout Control Without Touching Your Rails
Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw. Molded on pin for direct mounting. All 100 series (Rigid) stands require modelers to fabricate a spring connecting link between the stand and the turnout. All 200 series units (Sprung) have internal springs so they can be connected directly to the turnout throwbar. Measurements indicate the maximum amount of side-to-side travel when the lever is thrown. For use with Atlas, Roco, Peco, Micro Engineering and Shinohara switches.
Use 947-1196 Brass Wood Screws pkg(24) #1; 3/8 x .070inch to mount turnout to table. HO Wrapped Lumber Load for 72ft Centerbeam Flatcar - Nascor
(black, blue)
Put your railroad to work moving these Walthers SceneMaster Wrapped Lumber Loads from sawmills to local building suppliers. Made especially for the HO Walthers Mainline 72ft Centerbeam Flatcars (#910-4800 series, each sold separately) and adaptable to most cars with a similar interior length, each is pre-painted and lettered in authentic schemes, and snaps easily onto the car to add realistic detail in a matter of minutes! 1940s - 1950s Gas Pumps - Unpainted - pkg(2)
Kit includes hose, nozzle, and pump pieces for two pump assemblies HO Stencil Railroad Roman - Alphabet & Numbers - Black - Waterslide Decals
Description: Stencil Railroad Roman - Alphabet & Number - Black HO Scale - 16, 12, 8, 6, 4 inches Bi-Level Auto Racks - BNSF Rack & Flat Car - Circle Logo #300309 HO MP15AC - DCC Ready - Lake State Railway #1501
Detailed Information
LSRC FEATURES:
MU hose holders on each end
Operating front and rear ditch lights
Air filter box, horn, decal placement, and antenna style per road number
Lake State Railway began operations in 1992. LSRC operates on former D&M lines in the lower peninsula region of Michigan. Commodities carried include aggregates, coal, and grain. In 2016, LSRC acquired two MP15AC locomotives from Union Pacific. 1501 is a former MKT unit, and 1502 was formerly owned by MILW.
LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Windshield wipers
Lift rings
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
NEW FEATURES:
Operating ditch lights (if equipped)
Operating ground lights
Newly designed motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers PRLX ex Warbonnet #238
Expected in November 2020
Locomotive features:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Sound equipped models also feature:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PRLX features:
All PRLX locomotives are Primed for Grime with road numberspecific patches and fading
Many of BNSFs SD75Ms were in storage by 2014-2015. The 20plus year old units were definately past their prime at this point, however, most of them still had a future. Norfolk Southern bought a total of seven units, to become NS 2800-2806. In addition, Progress Rail Leasing (PRLX) bought a large group of the units. They arrived to PRLX wearing several paint schemes, including the Santa Fe Warbonnet as well as BNSFs Heritage II paint. The units were hastily patched and placed into service, as of this writing they are leased to CN and KCS, but future leasing assignments are likely.
Primed for grime models feature:
Duplicated look and feel of -In Service- equipment, -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per roadnumber matching each corresponding side to the prototype
Perfect starting point for adding grime and rust Trim Film - Blue 4.5 in x 7.5 inch sheet - Waterslide Decal HO Industrial/Commercial Detail Set
(Unfinished Metal Casting) Built-&-Ready Landmark Structures - Old Windmill
Assembled - 3-3/8 x 2-3/16 inches
(8.57 x 5.55 cm) HO CA-8 Early Caboose w/Lights w/DCC & Sound - Union Pacific #25511
Detailed Information
Union Pacific CA-8 Caboose FEATURES:
Caboose trucks with swing arms, friction or animated roller bearing bearing caps as prototype appropriate
Various safety slogans, in both early banner style with green lettering and late vinyl decal with special graphics
Sliding cupola side windows
Cupola-mounted marker lights when appropriate
25576 is offered in an early CA-8 Pool service configuration HO 60ft Hi-Cube Plate F Boxcar - Trailer Train TBOX #661025
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers #1710 Roundhead Stainless Steel Screws 2-56 x 5/8 inch- 12pcs Spray Can - Pearl Green (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint. Drill Bit #74 - 0.0225inch Diameter (2 pkg)
Product Information
Walthers Drill Bits are the right tools for all kinds of hobby projects, from detailing locomotives and cars, to scratchbuilding, wiring and more. Theres a full range of common wire gauge - jewelers drill bit sizes from number 80 to 43, and each pack includes two ready-to-use bits. Walthers miniature hardware is a complete range of ready-to-use parts and tools for hobby projects, including wood, machine and nylon insulating screws, plus appropriate hex nuts and washers, in assorted standard sizes (machine and wood screws may be brass or brass plated). Drill Bits are part of the line of Walthers miniature hardware and tools. Bi-Level Auto Racks - BNSF Rack & Flat Car - Circle Logo #300292 MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present HO - 4750 Cubic Foot Rib-Sided - 3-Bay Covered Hopper - Illinois Central - #765858
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-Etched Metal Roofwalk
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch Athearn HO - 40ft Ribbed 3-bay Ballast Hopper - New York Central- #1 - 4pack
950089, 950140, 950239, 950363
Removable load
Separately applied wire grab irons and brake wheel
Solid nickel silver wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch HO 35Ft Fruehauf Integral-Post Volume Van - Boston & Maine #10264
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers. HO Laser-Cut 2-Lane Curved Wood Grade Crossing - 14-16in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights. HO RTR ACF 4650 3-Bay Hopper - Norfolk Southern #251122
Date: 8-92
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists. Spray Can - Olive Drab (100mL) TS-5
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint. Downtown Deco N Scale - Addams Avenue Part Three - Kit
2 5/8Inch X 2 3/4Inch
Add character to urban areas along your railroad with this series of structure kits. The models feature detailed walls made of cast Hydrocal, plastic windows and doors, along with full-color signs and awnings. Each can be assembled with basic hobby tools, and easy to understand step-by-step instructions walk you through construction, from gluing the kit together to final painting and weathering.
This typical skid row/downtown hotel includes the -Palace Hotel & Card Room-, -Reds Bar- and the -Downtown Apartments.-
Morgan Olson Route Star Van - USPS
Modernize HO highways in minutes with these new Morgan Olson(R) Route Star Van replicas! Based on the popular delivery vehicles seen from coast-to-cast, these layout-ready models include a wide range of details and colorful printed graphics. Check out these other great features:
Newly tooled officially licensed replica!
Contemporary delivery vans and food truck versions!
Five authentic body styles with correct rear doors
Prototypes seen all across North America serving small businesses & fleet operators
Fully assembled
Full-color graphics
Detailed driving compartment w/interior bulkhead
HO ACF PD3500 Flexi Flo Hopper -
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990
Car No. 897878
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers Spray Can - Brown JGSDF (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint. Chicago & North Western(TM) #11967 (yellow, green; Employee Owned Logo) - Ready to Run
Now you can add one of the most versatile machines every built to your maintenance-of-way fleet with the WalthersProto Jordan Spreader! Used to profile and grade drainage ditches during warmer weather, when the flakes start flying, Jordans can be found plowing snow and pushing it back from the tracks. These HO replicas are based on the model 2-200 Spreader-Ditcher-Snowplow used by dozens of railroads, which have been in service year round since the 1920s. Featuring all-new tooling, the models are a perfect companion to the WalthersProto Russell Snowplows (sold separately) and feature:
Limited edition - one-time run of these numbers
Factory-installed grab irons
Positionable wings and moldboards can be raised and lowered
Built tough with durable metal hinges and other details
Complete underbody with brake gear and piping
Thin profile stirrups
Cab window glass
Railroad-specific details
Horizontal or vertical air reservoir
Original or one of 3 later headlight styles as appropriate
70-ton roller bearing or Bettendorf trucks as appropriate
Single-chime air horn placement
Ultra-smooth rolling metal axles and 33in wheelsets
Proto MAX(TM) metal knuckle couplers
HO RTR 60Ft Flatcar - SOO Line #5531
MODEL FEATURES:
Working drop ends. Gently lift up & push inward to fold ends down.
Separately applied wire grab irons
Interior detailing
Decorated models fully-assembled and ready to run out of the box
Machined metal wheels and RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Minimum radius: 18inch HO EMD GP40 - DCC & Sound - Western Pacific (Zephyr) #3514
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO USRA Single-Sheathed Boxcar: RF&P
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels HO GMD SD40-2W - DCC & Sound - CNNA (Non Dynamic Map/ Oper. Strobe Lites) #5362
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights 2-Amp 12-Volt Filtered DC Power Supply - Walthers Layout Control System
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
See the entire system!
The Walthers Layout Control System 2-Amp 12V Filtered DC Power Supply features:
12V filtered DC power designed especially for Walthers Layout Control System
Powers up to 16 switch machines using Distribution Blocks (#942-111, sold separately)
Perfect for powering all types of layout accessories
Tangent Scale Models HO Greenville 86ft Boxcar CSX
CSX -Repaint 1991+ leads off this release, offering examples of repaints from B&Os first order of cars in 1969. Applying CSX paint to a Tangent replica is not a walk in the park ? It is all about the big AND little details. This car features the large CSX logo on the center of the sides and accurate Ease up! stickers on the corners. Apparently, the more the better, since CSX also applied tiny Ease up! stickers on each door. Yes, we have faithfully reproduced this extraordinarily small detail. Get out your magnifying glass if you want to read the CSX Quality Check oval sticker applied above the COTS by Grand Rapids employees. This Greenville car features Morton style crossover platforms, an Ajax hand brake housing, accurate End-of-Car Cushioning details with truck mounted brake hardware, and 70-Ton Barber S-2 Trucks with 33in wheels and accurate Timken roller bearing caps. Check out the CSX-specific modern features in this release, including the large tack board mounting location on the door and the single and double third arms on the top door tracks. We are now offering CSX in six different numbers!
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
1/8In Fluorescent Red Rod (7pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Red
HEIGHT IN INCHES
1/8In
HEIGHT IN MM
3.2mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16198
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Early Yellow) #475264
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons HO Storefront Signs - Industrial & Manufacturing
Blair Line HO Scale Business and Storefront signs are printed in appropriate colors on thin plastic for easy assembly or placement with plastic cement or CA glue. Colorful signs are based on real signs and many include two identical signs for back-to-back, two-sided mounting. Steam and diesel-era signs make great roadside, street-side, trackside and structure details. HO 45ft Trailer - Fredrickson #327
MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- Fully-assembled and ready to use out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration HO 26Ft Can-Car Dry-Van Trailer - CP Express #7538
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today! HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20016
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate 3/64 inch OD Round Brass Tube - 0.006inch Thick x 12inch Long (2 pkg)
Round Brass Tube 0.006inch Wall thickness x 12inch Long - package of 2
Outside Diameter: 3/64 inch FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1788
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO USRA Single-Sheathed Boxcar: N&W
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels Precision Oiler
The Zona Precision Oiler comes filled with general purpose, lightweight, plastic-compatible oil in a hypodermic dispenser. This oiler is ideal for precision lubricating in hard to reach places. Code 83 Rerailers (3/pkg)
Atlas code 83 line is fine quality, prototypical track for the modeler who is looking for track that is more exact-to-scale than code 100. Atlas code 83 track has fine brown ties and smaller nickel silver rail.
HO 85ft General American G85 Flatcar - GTTX (Brown) #300391
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches HO FMC 4700 Covered Hopper - NAHX (3pk)
MODEL FEATURES:
- Separately-applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, -brake cylinder and triple valve
- 100-ton trucks with 36 inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
- Factory applied roof walk, roof hatch, end details, ladders, and wire grab irons
- Two outlet grate variations
- Accurately painted and printed on a highly detailed, injection molded body
- See-through etched metal end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- All 3-packs feature unique road numbers
- Minimum radius: 18 inches HO EMD GP7 - DCC & Sound - Erie Lackawanna EL #1207
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
EL FEATURES:
Re-Lettered Erie units; post 1960
Dynamic or non-dynamic, depending on road number
Two single-chime horns
-Canvas- sunshades
Long-hood-forward operation
Curved spark arrestors
In 1960, the Delaware, Lackawanna and Western Railroad merged with the Erie Railroad to form Erie-Lackawanna. The Erie had owned a sizeable number of EMD GP7s, which were all less than 10 years old at the time of the merger and still giving good service. Rather than spend precious money to repaint these units immediately, the EL decided to retain the Erie paint scheme, but omitted the -wings- on the ends of the units and added their own logos. The units continued in this guise until the mid-to-late 1960s when most were repainted in the grey-and-maroon EL scheme.
ROAD NUMBER SPECIFIC FEATURES:
#1207 Dynamic brakes
#1214 Dynamic brakes
#1221 Non-dynamic brakes
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch HO 40ft ACF Modernized Welded Boxcar - Erie Lackawanna #88225
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers Track Conditioner with Pads - 1/2oz
Now you can not only clean your track but you can condition the rails for top-notch performance of all your motive power! This conditioner will clean your track while laying down a non-slippery conductive film that will improve current flow. Use to enhance the operation of DCC and sound systems as well as DC train operation, and eliminate erratic stops and starts, flickering lights, and poor conductivity. Use the included pads to apply the solution to the rails for uniform application.
(Will not harm plastic ties.) Tangent Scale Models Delivery 1969 - Gunderson 6089 50ft BoxCar D&RGW
Denver & Rio Grande (D&RGW) Delivery 1969 is an exciting release for us. The distinctive D&RGW Grande Gold orange paint coupled with black ends and carefully added roof overspray makes a model that is simply stunning. The prototype Rio Grande graphics were carefully fitted to the available 7 panels of space to the right of the doors. The white paint at the tops of the ends reminds you that this is a high-cube car. The Rio Grande cars feature truck mounted brake details, faithfully replicated with accurate truck-mounted brake beam details and no body-mounted brake cylinder on the Hydra-Cushion underframe. The Tangent D&RGW model also features accurate unpainted Morton style crossover platforms, early 5-board large tack boards on the sides and ends and an Ajax handbrake. Don?t forget to check out those accurate Hyatt rotating roller bearing caps on the 70-ton Birdsboro foundry Barber S-2 trucks!
Product: Gunderson 6089 50ft High Cube Boxcar
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Birdsboro foundry Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 33in Wheels HO FMC 4700 Covered Hopper - UNPX #121022
MODEL FEATURES:
- Separately-applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, -brake cylinder and triple valve
- 100-ton trucks with 36 inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
- Factory applied roof walk, roof hatch, end details, ladders, and wire grab irons
- Two outlet grate variations
- Accurately painted and printed on a highly detailed, injection molded body
- See-through etched metal end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- All 3-packs feature unique road numbers
- Minimum radius: 18 inches HO EMD F40PH - DCC/Sound - Amtrak (Phase II) #284
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
PSC Transfer Van - Canadian National #76555
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
8 Pin NEM652 with Speaker 11x15mm
Note: Please write in the customer notes if you want a sound file programmed and with the locomotive description and/or ESU Sound File Number.
The LokSound 5 Fx is a special feature of the LokSound family: it has no output and is specially designed for use in control cars or drive heads, which require a sound but do not have a model drive themselves. By omitting the engine part, it can still offer all the sound features of the other LokSound 5 members on a size of only 21.5mm x 15.5mm.
LokSound 5 Fx decoders are offered with an 8-pole interface according to NEM652 or a 21MTC cutting point and always come with an 11 x 15 mm sugar cube loudspeaker and sound capsule kit.
Modes
Like all family members, the LokSound 5 Fx is a true multi-protocol decoder. It masters the DCC data format as well as Motorola(R), Selectrix(R) and M4. In DCC format, 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses and up to 32 functions. With the help of RailComPlus(R) technology, the decoders register fully automatically at a suitable digital center.
It masters all DCC programming modes and can be both driven and programmed with compatible digital centers: Thanks to RailCom(R), it is possible to read out the CV values on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.
Motorola(R) users benefit from up to 28 driving steps at 255 addresses. Three additional Motorola(R) addresses enable the triggering of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.The M4 protocol allows automatic login to mfx(R)-compatible control panels.
The LokSound 5 Fx Decoder detects the Marklin(R) brake distances as well as ZIMO(R) HLU brake commands or the Lenz(R) ABC system. Also the brakes with DCC brake blocks or with DC voltages possible. It also stops with a Selectrix(R) brake diode. An ABC commuter train system allows automatic commuting between two stations.
The LokSound 5 decoder can be used on analog DC and AC webs.
The decoder switches on-the-fly fully automatically between operating modes. Most of the time, nothing needs to be adjusted.
Sound
The LokSound 5 Fx decoder can play up to 12 channels simultaneously. Each channel can be resolved with up to 16 bits / 31250 kHz and offers hi-fi quality on your system. There is virtually no difference to the original audible anymore. A Class-D audio output stage with up to 3W output controls the speakers, which may have between 4 ohms and 32 ohms impedance. A 128 Mbit sound memory provides enough capacity.
All individual noises can be adjusted individually in the volume. The super-flexible sound gine without a rigid schedule allows the exemplary simulation of all conceivable rail vehicles.
Functions
There are also some lights to turn on in the control car or drive head. Thats why we have equipped the LokSound 5 Fx with 6 reinforced function outputs. In the version with 21MTC interface, 6 outputs are added for controlling servos or logic level outputs. All important lighting functions are available. The brightness of each output can be set separately.
Motor
Although the LokSound 5 Fx itself does not have an engine output, it still simulates one. This is used for synchronization with the motor car, where ideally a full-fledged LokSound 5 decoder performs its service. In the train bandage, this ensures that the brake squeak takes place at the same time or that the lamps also switch the direction of travel at the same time.
Operational reliability
A PowerPack can be connected to the LokSound 5 micro DCC Direct Kato USA on request to bridge dirty rail section HO 73Ft Center Partition Car - Norfolk Southern #120391
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius HO 5820 Covered Hopper - Procor/UNPX (Union Carbide) #122026
Era: November 1977+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
Ballast - Coarse Gray Blend - Shaker (57.7 in3)
Use ballast and coal for any scale to model realistic railroad track, gravel roads, crushed rock and stones, hopper loads, and coal piles. Available in several colors and sizes, you can mix and match for a superior realistic effect. Ballast and coal are lightweight and easy to use. Watch the Woodland Scenics video about how to apply it and attach with scenic cement!
ALLERGY CAUTION: Ballast contains tree nut by-products. 6mm Static Grass - Spring Grass (20g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX (6 pkg) #6
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Includes Road Numbers:
21125
21173
21200
21268
21294
20299
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate HO NSC 60ft Ingot Flat Car - RTAX Liberty Railway Services
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
Code 83 Crossing - Nickel Silver w/Brown Ties - 60 Degrees
DCC Friendly HO 20K Gallon Acid Tank Car - GATX #29015
Era: 1991-2009, 2010-Present Day
MODEL FEATURES:
- Multiple road numbers
- Many separately-applied details
- Etched metal walkways
- Different top platforms as appropriate per prototype
- Different brake systems as appropriate per prototype
- Separate wire grabs and handrails
- Trucks with animated rotating bearing caps
- Minimum radius: 18 inches
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Body-mounted, McHenry scale double-shelf knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod
details
- Machined metal wheels with RP25 contours operate on all popular brands of track N Scale FM H-24-66 Phase 2 Trainmaster - Silver Standard DC - Canadian Pacific (Late) #8917
Features:
Ends with large number boards and a single headlight
Golden-white LEDs
Directional lighting
Painted safety rails
Etched metal grilles
Blackened metal wheels
Factory-installed AccuMate magnetic knuckle couplers
Atlas Master Series Silver Additional Features:
Atlas Silver Sound Ready models are equipped with a speaker for easy conversion to sound with the addition of a decoder.
AccuMate couplers are made under license from AccuRail, Inc N Scale Railroad Decal Set - Canadian Pacific Modern Boxcars 1970+ HO MIL 3800 Covered Hopper - CP (Delivery Scheme) #382676
They are back, again! The famous Rapido 3800 cu.ft. Cylindrical Hoppers make a triumphant ~THIRD~ return with new road numbers and paint schemes!
FEATURES INCLUDE:
- Round-hatch or Trough-hatch design
- Correct Dofasco S-2 100-ton trucks
- Two body variations with 6- or 11-side panels
- Three brake equipment variations and optional additional air reservoir on NSC cars (if applicable)
- Etched running boards and brake crossover platform
- Factory-installed air pipes and coupler cut levers
- Finely molded plastic walkway supports and end cages
- Full separate air piping and brake equipment details Vintage Motor Hotel with Office and Restaurant - Kit
If you hit the highways in the 1950s and 60s for business or fun, these classic roadside motels are forever a part of your memories and now they can be part of your HO layout with the Cornerstone Vintage Motor Hotel with Office and Restaurant Kit! A great value with three complete structure kits for one low price, other features include:
Two different styles of big roadside signs - decals for Westwind, Shadetree, Desert View and Green Valley Hotels
Printed paper curtains
Molded in six colors and clear plastic
Add more rooms with the matching Vintage Motor Hotel Kit (#933-3488, sold separately)
Office: 5 x 3-1/16 x 1-3/4in (12.7 x 7.7 x 4.4cm)
Hotel: 10-3/16 x 4 x 2-5/8in (25.8 x 10.1 x 6.6cm)
Restaurant: 6-3/4 x 5-5/8 x 3-1/4in (17.1 x 14.2 x 8.2cm)
Signs: Style #1 w/Base: 3-1/4 x 7/8 x 3-3/4in (8.2 x 2.2 x 9.5cm)
Style #2 w/Base: 3 x 7/8 x 3-5/8in (7.6 x 2.2 x 9.2cm)
HO 55Ft Evans 4780 Covered Hopper - Boston & Maine #5412
Product Information
Expand grain traffic along your HO railroad with a fleet of WalthersProto 55ft Evans 4780 Covered Hoppers! Introduced in 1977 and still going strong today, they can be found handling all types of grains and dried distillers grains used for animal feed. Fully assembled and ready for service, features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint and lettering
Ultra-smooth rolling 36inch RP-25 turned wheelsets
Proto MAX(TM) metal knuckle couplers 10Ft 6In Modified 1937 AAR Boxcar - Gulf, Mobile & Ohio #53015 HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21125
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate HO Glass-Fiber Style Cushion Coil-Car Hood - Kit (2pk)
Add a modern touch to your Walthers Proto or older Walthers 50ft Evans Coil Cars with this easy to build HO kit. Based on the later glass-fiber covers that replaced older steel styles, parts for two undecorated hoods are included. HO Value Line RTR - 13 Panel Coalporter - Conrail Quality #505321
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch Atlas Trainman HO
2 Bay Off set Hopper with Flat Ends Canadian Pacific #357017 Built-&-Ready Landmark Structures - Dugans Paint Store
Assembled - 4-19/32 x 3-5/8 x 4-1/2 inches
(11.6 x 9.2 x 11.4cm)
Color your city scenes with Dugans Paint Store. The fully assembled model is custom painted, expertly weathered and loaded with architectural detail. Accessories include full roof detail with ductwork, custom signage, colorful awnings, benches, a fire escape and more. Includes window treatments and dry transfer decals plus a first-floor printed interior and one warm white LED light, compatible with the Just Plug Lighting System. 25mA RoHS compliant. HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140007
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate HO 68Ft Railgon Gondola - Southern Pacific #365190
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers Light Green
Models tree foliage for medium to large trees and low-to-medium ground covers, such as bushes, trees and shrubs. Use for any scale, colorfast and blends with other foliage.
Available in six realistic colors and great for making small trees too! Each package includes 32 oz volume of material. Underbrush works well for medium ground cover or undergrowth. It blends with our Foliage, Field Grass and Turf products.
1. Apply Scenic Glue (S190) to layout.
2. Press Underbrush into glue and allow to dry. 12inch Long Round Aluminum Rod - 1/8 inch Diameter
Round Aluminum Rod - not hollow (1 pc)
Outside Diameter: 1/8 inch HO EMD SW9 - DCC & Sound - Boston & Maine (B&M As Delivered) #1224
Boston & Maine:
Delivered in 1952
-Trash can- style spark arrestors
Deck mounted side handrails
Hood mounted number boards (road number specific)
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor HO Parking Meters (20/pkg)
HO drivers may not like them, but these detailed Parking meters from SceneMaster are a great detail for your downtowns! Perfect for layouts from the 1950s to the present, the set includes 20 ready to install meters. Each one-piece meter is molded in gray and easily painted to match the prototypes. Use them with the SceneMaster Parking Lot (#949-1260) and Parking Lot Concrete Barriers (#949-4178), both sold separately, model a complete scene! G2 SD70M-2 - DCC & Sound - FEC #106
Genisis 2.0 Features:
See-through pilot steps, Lit Marker Lights (CN)
LIT numberboards & ground lights
Detailed Information
FEC NOTES:
Florida East Coast received a group of 4 SD70M-2s in 2008, painted in the RailAmerica scheme. The units were often found on mainline trains with GP40-2s, SD40-2s and the roads other SD70M-2s.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Etched see-through steps
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights HO Scale SD30C-ECO - DCC & Sound - Canadian Pacific #5038
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank. HO NSC 64 Ft 6000 Cubic Gondola HS - XRMX #2202
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate HO Vancouver Iron Works Piggyback Flatcar - Canadian National #688109
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
(Black, Red) HO 70-Ton 12-Panel Hopper - Pennsylvania (H39 Bethlehem Blt.) #667232
Blt.2-60
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers. HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian Pacific #304661
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers HO Code 100 Insulfrog Large Radius Turnout - Right Hand
If you wish to mix wheel standards on your 00/H0 layout, this is the trackage to choose. Code 100 rail allows flange depths up to 1.6mm which means that both vintage and current stock will run happily together.
The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make it easy to build convenient, complex and aesthetically pleasing formations using combinations of small, medium and large radius turnouts and crossings.
Technical Specification:
Length: 258mm
Frog Angle: 12 Degrees
Radius: 1524mm
USE:
SL10 Conducting Rail Joiners: Nickel Silver for PECO Code 100 track
SL11 Insulated Rail Joiners for PECO Code 100 track
SL14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork HO Modern 50Ft Highway Overpass - with Pier
The Rix Modern Highway Overpass for HO scales is modeled after the bridges built today to span over railroad tracks. This style of bridge is typical of most new construction and is used all over the country. The Rix Modern Highway Overpass consist of 50 foot spans which interlock together so that any length bridge can be built. The piers are designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy.
HO MP15DC Gold - DCC & Sound w/ Ditch Lights - LTEX #1502
Features:
Three different hood styles (angled air filter box, square air filter box, standard hood)
Exhaust stacks: with or without muffler
Long hood sand fill: recessed or extended
Rear sand fill: Three variations of sand boxes behind cab
Pilot: standard or with snow plow
Additional Features:
Separately-applied scale detail parts include: windshield wipers, metal grab irons, coupler cut levers, multiple-unit hoses, snow plow, train line hoses, fine scale handrails, and more!
See through step detail on sill
Etched metal radiator grilles
Painted crew members
Factory-equipped with AccuMate knuckle couplers
Coupler pocket designed to accept AccuMate Proto-couplers
Five-pole skewed armature motor w/ dual flywheels for optimum performance at all speeds
Directional lighting with golden-white LEDs
Atlas Master Series Gold Features:
ESU LokSound decoder, supporting all DCC programming modes.
Flexible mapping of function keys F0 to F31.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor and more. HO EMD SW7 - DCC & Sound - Conrail #8905
From coach and freight yards to primary power for shortlines, the WalthersMainline SW7 is a perfect choice for your HO layout! Delivering 1200-horsepower from an updated 567A prime mover, the prototypes proved popular with both railroads and industrial lines, with nearly 500 produced in just two years. Based on Phase II production units constructed from 1950 to 1951 with several still in service, each layout-ready model is packed with features including:
- One time run of these roadnumbers, order now - limited quantity available
- Used by dozens of railroads and industrial lines for switching, local and branch line service with several preserved today!
Based on Phase 2 prototypes built from 1950 to 1951 with:
- Wire grille radiator cover
- Dual tall conical exhaust stacks
- Large front radiator grille
- Single straight hood to cab transition
- 6 louvered side doors with letterboard gap
- Small square center cab windows
- Factory-installed grab irons on hood and cab
- With or without footboards as appropriate
- 4 styles of headlights to match prototype practice as appropriate:
- Original large single
- Retrofit horizontal dual
- Retrofit dual vertical
- Dual sealed beam
Available with ESU(R) Sound and DCC for DCC and DC layouts featuring:
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch 567A prime mover sounds
- Compressor
Same powerful drive as WalthersProto(R) locos featuring:
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Dual machined brass flywheels
- Heavy die cast metal chassis
- Constant and directional LED headlights
- Next18 DCC Plug
- RP-25 metal wheels
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
Alternate horns and bell sounds can be programmed on the sound decoder using these CVs:
Horns: CV163 = Leslie A-200
CV163 = Wabco Single Chime
CV163 = Nathan M3
CV163 = Leslie S3L
Bells: CV164 = Bronze Bell (default)
CV164 = Steel Bell
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present HO EMD GP7 - DCC & Sound - Maine Central MEC #564
Detailed Information
MEC FEATURES:
Winterization hatch
Full sill skirts
Nose-mounted bell
Tall MU stands
Maine Central continued the process of dieselization of their freight operations in Fall 1950 and 1953 with the purchase of 9 EMD GP7 locomotives equipped with dynamic brakes. We are offering these units in MECs -simplified- green paint scheme for the first time in our Genesis product line.
ROAD NUMBER SPECIFIC FEATURES:
#563
Unique MEC logo on front and rear ? New color formulation of gold color based on input from MEC modelers
#564
-Simplified- green paint scheme
#566
-Simplified- green paint scheme
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control SubTerrain System - Foam Risers (1/2in)
4/pkg - 1/2 x 2-1/2 x 24 inches (1.27 cm x 6.35 cm x 60.9 cm)
Risers are generally used with incline/decline starters to create varying grades on your layout. Risers are easily flexed to form curves and work on plywood or foam bases. To install, pin in place with foam nails and attach with foam tack glue or low temp foam glue gun and glue sticks. HO CA-8 Early Caboose w/Lights w/DCC & Sound - Union Pacific #25576
Detailed Information
Union Pacific CA-8 Caboose FEATURES:
Caboose trucks with swing arms, friction or animated roller bearing bearing caps as prototype appropriate
Various safety slogans, in both early banner style with green lettering and late vinyl decal with special graphics
Sliding cupola side windows
Cupola-mounted marker lights when appropriate
25576 is offered in an early CA-8 Pool service configuration HO Alco FA-1 & FB-1 Set - DCC Ready - Canadian Pacific (Block Scheme) #4026, 4415
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds HO GP40-2 - DCC Ready - ONT #2201
Detailed Information
ONT FEATURES:
Ex-B&M
Corrugated grilles
Non-dynamic hatch
Front and rear ditch lights
Side-mounted hood bell
M3 horn on long hood
Blomberg M trucks
Large fuel tank
Large front anticlimber
Small EMD front plow
Lit number boards and class lights if equipped (effect in DCC)
The Ontario Northland Railway is operated by the Ontario Northland Transportation Commission, part of the government of Ontario, Canada. Purchased in 2005, these ex-BM GP40-2s were repainted into this bright and vibrant scheme. A few kept their nose class lights after rebuild. The units have been seen operating in both freight and passenger service.
ROAD NUMBER SPECIFIC FEATURES:
#2200
Ex BM 311; class lights
#2201
Ex BM 300; removed class lights from nose
#2202
Ex BM 304; nose class lights only
GP40-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch 50ft Ext Post High Cube Plug Door Box - Wisconsin Central #1739
MODEL FEATURES:
Former MDC tooling
Brand new paint schemes
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Separate brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 18inch HO PC&F 5241 CUFT - Boxcar - BKTY Patch 1 (UP) - Single Car #153411
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme HO Scale GP38 - DC/DCC Ready - Southern (High Nose) #2754
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO 50ft PC&F, 8ft & 6ft Boxcar - SSW/GWS #27377
MODEL FEATURES:
- Separate wireform grab irons, etched metal coupler platforms, and/or etched metal roofwalk
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- Weighted for optimum performance
- Separately applied wire grab irons where applicable
- Trucks with animated rotating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Body-mounted, McHenry scale double-shelf knuckle couplers
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
- Minimum radius: 18 inches
- Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust HO Value Line RTR - 13 Panel Coalporter - NYC (Conrail Quality) #505804
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52R class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch Fir 4 - 6inch 10 - 15cm Tall pkg(13
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors. HO MI-JACK Translift(R) Intermodal Crane - Kit
DIMENSIONS:
7-3/8 x 3-3/4 inches (18.7 x 9.5cm)
This Walthers Cornerstone HO Scale MI-JACK Translift Intermodal Crane is based on the versatile crane that moves trailers and containers between trains and trucks or container chassis. Its wide enough to straddle the intermodal car and two rows of trailers or containers parked side by side, making short work of loading or unloading.
- Must-have detail for 1970s and later intermodal terminals
- Used worldwide
- Holds containers or trailers
- Adjustable parts to model a working crane
- Includes magnets to hold containers
- Colorful decals
RTR 52Ft Mill Gondola, TFM #60047
MODEL FEATURES:
Fully assembled and ready for your layout
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
33In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
Open top cars, such as gondolas, have been a mainstay on railroads for decades as they are ideal for carrying large, bulky loads such as coil steel or scrap metal loaded by crane. Bowser HO 50Ft 2 Door Boxcar Reading No 19206
Ready to run
Roller Bearing Trucks with 36in wheels
Knuckle couplers HO 66ft Bulkhead Flatcar - Undecorated National Steel Car
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.04 (10pcs pkg) HO 50ft Waffle HC Plug Door Boxcar - SCL #90947
MODEL FEATURES:
- Separate brake wheel
- Body-mounted McHenry operating scale knuckle couplers
- Machined wheels with RP25 contours
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches Gravel - Gray Fine
Gravel is sized to model gravel roads more realistically. Use Accent for shoulders and to model bare spots on roads.
Gravel- 10.8 in3
Accent Powder- 1.8 in3
Coverage: Models a gravel road 14 feet x 2 inches HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels PRR X31A Single-Door Boxcar: Plain Keystone - Single Car #70008
(1961-1968)
Detail Variations:
6-pack includes the following numbers:
#68377
#70008
#70094
#70178
#70274
#76625
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale HO H-6-D - DC/Silent - Canadian National Railway (Straight Wafer) #1330
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts. HO EMD GP9 Phase II - DCC & Sound - Undecorated
Loksound 5 sound
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today. Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21mtc connector
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
A great starting point for a custom-build, features of this model include:
Dynamic w/48inch fan and nondynamic long hoods
Single fuel filler on sill
Drop steps
Footboards
8 styles of MU stands and receptacles
MU hose clusters front and rear
Ratchet- and Peacock-style handbrakes
Steam generator and piping
Pyle (early and late) and Mars dual-sealed beam headlights
See-through 36inch and 48inch fans w/separate blades
Roof-mounted air tanks and piping (-torpedo tubes-)
Rounded and Square winterization hatches
Harco, C&O, Super lifting and non-lifting and N&W-style spark arrestors
Folded-style cab window deflectors
Canvas and metal sunshades
Two all-weather cab windows
Blomberg Type B sideframes w/separate swing hangers and brake cylinders
Roller bearing, sloped, square and plain bearings
Separate speed recorder and Automatic Train Stop (ATS) shoe
Two styles of fuel tanks; 1200/600-gallon fuel and water and 1600-gallon Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x12) .011In x .135In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 1 X 12 LUMBER SIZE IN HO SCALE HO EMD GP15T Diesel - DCC & Sound - CSX #1518
ETA: July 2023
Detailed Information
CSX FEATURES:
Unique art per road number
Ditch lights on both ends
Timken roller bearings
5-chiime horn
Expert approved artwork and colors
By the mid 1990s, CSX started to adapt yellow ends and frame stripes to some of their diesels to be more visible at grade crossings and help prevent collisions. This was a simple way of updating the paint scheme without a full repaint. Both the black frame (Blue Stripe) and blue frame (Blue Down) examples are represented in this run for some variety to your fleet. Each road number offered has different art details between them.
ROAD NUMBER SPECIFIC FEATURES:
#1504
-Blue stripe- repaint with yellow ends and frame stripe
C&O sub lettering
whip antenna
large front plow
unique number board font
#1513
-Blue stripe- repaint with yellow ends and frame stripe
CSXT sub lettering
whip antenna
large front plow
crooked CSX lettering on right side
#1518
-Blue down- repaint with yellow ends and frame stripe
CSXT sub lettering
whip antenna
Chessie front rock plow
GP15 SERIES LOCOMOTIVE FEATURES:
Operating Class Lights (DCC only)
Operating Number boards
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box 1940-49 REO Speedwagon - Unpainted and Resin Cast Kit 4A for G Scale, Screw Terminals, No Recorded Sound Files
For Scale: O & S The LokSound V5 XL decoder is intended for use in all applications where the required power exceeds the current limits of a LokSound 5 decoder. Ideally, these are 0 and S scale locomotives. Despite its compact dimensions of only 50.8 mm x 25.4 mm x 14 mm, the V5 XL is equipped with a dual speaker output and integrated PowerPack. The LokSound V5 XL Screw is equipped with multiple screw connectors. HO GE C30-7 - DCC & Sound - Burlington Northern (Early Scheme) #5526
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s. N Scale 52Ft Mill Gondola - C&O Railgon #351342
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch HO 60ft PS Flatcar - Burlington Northern #630844
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers HO UAC TurboTrain (DC/DCC/Sound): VIA #2 - 5 Car Set
#149-204-259-229-154
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model. HO GSC 41-HR Metal Passenger Trucks w/36in Metal Wheels
Used on many Pullman-built lightweight cars from 1941 to 1943. An easy upgrade for new and older HO Scale passenger cars, WalthersProto trucks are fully assembled and ready to use with built-in electrical contacts for car lighting and 36in turned metal RP-25 wheels. Chicago & North Western #39641
Built: BLT 2-69 RBLT 7-84
Metal wheel sets , Kadee #5 installed HO 50ft Ext-Post Hi-Cube Plug Boxcar - Columbia & Cowlitz #3037
MODEL FEATURES:
- Separately applied brake wheel and stirrups
- Highly-detailed, injection-molded body
- Metal wheels with RP25 contours operate on all popular brands of track
- Minimum radius: 18 inches Tru Color Paint 010 - Acrylic - Black - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). Concrete Lamp Post - Just Plug(TM) package of 3
modern street lights HO 53ft Singamas Corrugated-Side Container - TMX Intermodal
(green, white, black, red)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes HO Greenville 86Ft Double Plug Door Box Car - CSXT (Boxcar Scheme 2019+) #180844
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
CSXT -Boxcar Scheme 2019+- throws a -modern era- repaint into this release mix. This Tangent model replicates the most modern incarnation of the CSXT scheme we have found yet applied to Greenville 86Ft boxcars, starting in 2019. For those keeping score, this is a former Chessie C&O 1978 car, with its 5-grab body style and body mounted brake hardware. The times, they are a-changin, and this car has an updated appearance for 2019-2020+ layouts. Notice the lack of a COTS panel on the paint job, vertical conspicuity striping, the correct placement of the large tackboard near the reporting marks, and the modification of the -third arm- layout on the left hand door. Those yellow-painted grab irons look classy! We even threw in the tiny one-inch 2020 Door inspection data patch, so we apologize to the 2019 guys for technically bumping the era forward one year. This car is ready to roll behind those CSX GEs. HO EMD Underframe Mount Bells (2pk) HO Steel Water Tank - Kit
Product Information
Add detail to your steam locomotive servicing facility with the Walthers Cornerstone HO Scale Steel Water Tank. A must-have for any steam-era layout, equipment like this could be found in terminals large and small. Water was vital to railroad operations in the days of steam. Thousands of gallons were needed to keep the engines hot and the railroad running. But as locos grew bigger, older tanks were often unable to meet demand. When plate steel became cheap enough to use as a building material in the 1920s, railroads began replacing decaying wooden towers with all-steel designs. These larger capacity tanks were usually erected away from the tracks, supplying water to thirsty locos via standpipes. This allowed the most versatility, as the standpipes could be erected where they were needed most. This was a common option for engine terminals and some smaller stations, where there was simply no room for the big tanks. Many of these steel tanks lasted beyond the days of steam and still supply water to shops or other company facilities. Perfect for serving your biggest and best steam power, this kit offers all the versatility of the prototype. It requires a small amount of layout space and comes with two standpipes which you can install wherever you want. Detailed parts are molded in color, while complete instructions make construction fast and fun. For the finishing touch, decal signs are provided. Use the Steel Water Tank in your layout scenes with other Cornerstone HO Scale railroad buildings.
North American prototype
Must-have for steam locomotive servicing scenes
Detailed tank supports
Two standpipes
Molded in appropriate colors
The finished Steel Water Tank model measures: 3-7/16 x 3-7/16 x 7inch (8.5 x 8.5 x 17.5cm) HO Code 83 Curved Snap Track - 18 Inch Radius (6/pkg)
Atlas HO Scale Code 83 Snap Track features brown ties and nickel-silver rail. Its perfect for modelers of all skill levels looking for high quality, prototypical-looking track with a near-scale rail height. Brown ties feature molded centerline nail holes for easy mounting with #2540 track nails. Fully compatible with all Code 83 Snap Track and conventional Code 83 track systems. Adapter track joiners #551 are available so you can also use Code 100 track on the same layout if desired. The track geometry of Code 83 track matches that of Code 100 Snap Track, so Code 83 track can be substituted for Code 100 in various Snap Track track plans. HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Erie #79008
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme HO H21A 4-Bay Hopper - K Brakes - Pennsylvania (PRR Red, Circle Keystone) #179378
1930+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Ready to Run.
Features:
Crisp details and sharp painting and printing,
metal wheels and knuckle couplers
1st time offered with the correct Trucks N Scale Horizon Fleet Dinette - Amtrak Phase III Wide #53504
Super-detailed, as is Tradition
Rapido brings their experience with passenger car models to this long warranted fleet of cars used for intercity travel across America (and even into Canada). The Rapido cars will feature the same great attention to detail youve come to expect, including free-rolling wheels, detailed underbodies, interior lighting and more.
Coach, Dinette and Club Dinette cars available
Full underbody details unique to each car style
Full multi-color interior detail with separate seats
Folding steps or fixed stairs as appropriate
GSI G70 trucks with free-rolling, turned-metal wheelsets
Accurate painting and lettering
Constant interior lighting in DC and DCC
Working marker lights
Separately-applied metal grab irons HO RTR PS-2 2600 Covered Hopper - Grand Trunk Western (GTW) #111132
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track N Scale AutoFlood III RD Coal Hopper - UP/CMO #504337
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
FEATURES:
- One time run of these road numbers, order now - limited quantity available
- Prototypes seen from coast-to-coast 1974 to the present
- Handles all types of general freight loading
- Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
- 41ft 3in Truck Centers
- 15ft 2in Tall
- 10ft 8in Wide
- Fully assembled
- Correct 33in RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers Evergreen Scale Models Opaque White Polystyrene Strips 14in .125x.250 (5pcs pkg) HO Scale H1b Hudson Steam - DCC & Sound - Canadian Pacific (Delivery) #2816
-Early walkway w/smoke deflectors
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius HO RTR PS 4740 Covered Hopper - Norfolk & Western #176854
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Body-mounted McHenry operating scale knuckle couplers
36inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Multi-packs feature unique road numbers
Weighted for optimum performance
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Brown
Product Information
The LokSound by ESU Super Thin Wire is AWG 36, .5mm, 36AWG super flexible wire. It comes in a 30Ft 10m roll and is matched to common DCC colors. HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4557
8inch stripe w/out water expansion tank, w/ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder HO GE Dash 9-44CW - DC/DCC Ready - Canadian National CN #2510
CN FEATURES:
Canadian 4-window cab with high-mounted number boards
K3 horn
Front ditch lights
Front class lights
Rear single style headlight
Cab-mounted brass bell
Canadian National purchased 23 safety cab Dash 9 locomotives from GE in late 1994. Classed as -C44-9WL-, these locomotives were seen all over the system and featured a 4-window Canadian style cab, front and rear anticlimbers, and single rear headlight.
ROAD NUMBER SPECIFIC FEATURES:
#2506 Later appearance with right side yellow number board numbers and missing left side -American Continent- map art
#2510 As-delivered appearance
#2522 As-delivered appearance
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
Evergreen Scale Models 3025 .025in Opaque White Polystyrene Passenger Car Siding (1sheet) Evans X72A Box car: APASCO - GE Leasing - Single Car #6112
Detail Variations:
6-pack includes the following numbers:
#6005
#6040
#6077
#6112
#6122
#6150
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels HO Intermountain 4-Panel Coalporter, Canadian National
CNA Website scheme
Features:
Sharp Painting and Lettering
Prototype Accurate Paint Schemes
Multiple Road Numbers
InterMountain 100 Ton Trucks with 36in Metal Wheelsets
Metal Knuckle Couplers Tru Color Paint - Acrylic - Vermont Red - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). 2mm Static Grass - Summer Grass (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Minneapolis & St. Louis (M&StL Red) #54992
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme N Scale 100-Ton 3-Bay Ribside Open Hopper w/Tarps 4-Pack - (FOAM) - SOO Line
60839, 60853, 60867, 60899
Product Information
A coal train standard from the 1960s on, cars feature an injection-molded body, realistic load, fine paint and lettering and Magne-Matic(R) magnetic knuckle couplers. HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286320
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation N Scale Short Barrel Ore Hopper - Ontario Northland: Progressive Green #6524
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms Ballast - Fine Light Gray - Shaker (57.7 in3)
Use ballast and coal for any scale to model realistic railroad track, gravel roads, crushed rock and stones, hopper loads, and coal piles. Available in several colors and sizes, you can mix and match for a superior realistic effect. Ballast and coal are lightweight and easy to use. Watch the Woodland Scenics video about how to apply it and attach with scenic cement!
ALLERGY CAUTION: Ballast contains tree nut by-products. HO Champion Brake Wheels - Red Oxide (8pcs)
8 brake wheels for freight cars. Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.125 (10pcs pkg) HO RTR 53Ft Jindo Container - UPSU (3pkg) #2
MODEL FEATURES:
Newest vertical rib front
Easily stackable
Separately applied door closure rods
Fully assembled
Each container individually numbered
Razor sharp printing and painting
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CWSX #140008
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
N Scale Amtrak "Rainbow Era" 8 Car Set
Like its locomotives, all of Amtrak?s rolling stock was inherited from predecessor railroads such as Penn Central. Since there wasn?t time enough to implement uniform branding on Amtrak?s fleet come May 1st, 1971, most trains were comprised of varied rolling stock from multiple railroads resulting in a colorful, or rainbow-like appearance. By 1972, Amtrak developed its Phase I livery and began repainting its fleet of heritage coaches, however due to the size and service demand of the fleet, this process took several years causing the ?rainbow era? to last well into the decade. HO RTR SD40T-2 - DCC Ready - D&RGW Rio Grande #5353
DRGW FEATURES:
81inch nose
Functioning nose light
Sinclair Antenna
Correct sized fuel tank
See-through lower air intakes
Snow plow
Ratchet style brake
Dual fuel fillers
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Separately applied air tanks
See through cab windows
Welded ECAFB
Photoetch windshield wipers
LED Lighting
HTC truck sideframes
All-wheel electrical pickup
See-through dynamic brake fans
-Mushroom- nose vent on right side
Separately applied wire grab irons
Fully assembled and ready-to-run
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox speific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body
Painted and printed for realistic decoration
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for troublefree operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Replacement parts available including motor brushes
Recommended radius: 22inch 0.025 inch Thick Brass Flat Sheet - 6x12inch
Brass Flat Sheet 6inch Wide x 12inch Long (1 pc)
15 x 30cm Flexible Vinyl Stone Wall Arches - Style 1 - Small Arches
DIMENSIONS:
6 Small & 5 Medium: 2-1/2in & 4-5/8in 6.3 & 11.7cm
Product Information
Add realistic detail to HO structures with this set of Stone Wall Arches from Chooch Enterprises. Molded in flexible vinyl thats easy to cut with scissors or hobby knife, they can be finished with acrylic paints (sold separately) for added realism. HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Orange) #506416
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012. Brass Strip - 12inch x 3/4inch x .032inch
Length: 12inch
Width: 3/4inch
Thickness:0.032inch HO Scenic Accents - Firemen to the Rescue (8pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
A set of firemen, a little girl, a dog, cat and a ladder. One fireman cares for the little girl, one fireman is signaling above his head, one fireman is standing, watching another fireman on a ladder rescue a treed kitty. HO USRA Composite Drop-Bottom Gondola -Ready to Run- Michigan Central #12217
Date: BLT 8-19
All are Ready-to-Run
-Laser Cut Wood Sides and Floor
-Laser Sharp Painting and Printing
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch HO USRA Composite Drop-Bottom Gondola -Ready to Run- Michigan Central #12031
Date: BLT 8-19
All are Ready-to-Run
-Laser Cut Wood Sides and Floor
-Laser Sharp Painting and Printing
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch HO 55Ft Evans 4780 Covered Hopper - ADM (UELX) #30248
(Yellow molecule logo)
Product Information
Expand grain traffic along your HO railroad with a fleet of WalthersProto 55ft Evans 4780 Covered Hoppers! Introduced in 1977 and still going strong today, they can be found handling all types of grains and dried distillers grains used for animal feed. Fully assembled and ready for service, features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint and lettering
Ultra-smooth rolling 36inch RP-25 turned wheelsets
Proto MAX(TM) metal knuckle couplers HO Scale - 1937 Studebaker COE Gasoline Tank Truck - Unpainted and Resin Cast Kit HO MP15DC Gold - DCC & Sound w/ Ditch Lights - Norfolk Southern #2372
Features:
Three different hood styles (angled air filter box, square air filter box, standard hood)
Exhaust stacks: with or without muffler
Long hood sand fill: recessed or extended
Rear sand fill: Three variations of sand boxes behind cab
Pilot: standard or with snow plow
Additional Features:
Separately-applied scale detail parts include: windshield wipers, metal grab irons, coupler cut levers, multiple-unit hoses, snow plow, train line hoses, fine scale handrails, and more!
See through step detail on sill
Etched metal radiator grilles
Painted crew members
Factory-equipped with AccuMate knuckle couplers
Coupler pocket designed to accept AccuMate Proto-couplers
Five-pole skewed armature motor w/ dual flywheels for optimum performance at all speeds
Directional lighting with golden-white LEDs
Atlas Master Series Gold Features:
ESU LokSound decoder, supporting all DCC programming modes.
Flexible mapping of function keys F0 to F31.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor and more. HO SD38 - DCC Ready - Conrail (NS) #3805
ROAD NUMBER SPECIFIC FEATURES:
#3805
- White patch with black numbers
- faded paint effect
- triple clasp brakes
- large fuel tank
- rear mounted Leslie 3 chime horn
- front ditch lights
- angled cab roof antenna
- Prime A/C
- small EMD plow
#3818
- Black patch with white numbers
- faded paint effect
- triple clasp brakes
- large fuel tank
- rear mounted Leslie 3 chime horn
- front ditch lights
- cab roof antenna
- Prime A/C
- no plow
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO Code 83 Plastic Insulating Rail Joiners (24pcs)
Use Atlas HO Scale Code 83 Plastic Insulating Rail Joiners to join and electrically isolate sections of track. Joiners will work with any brand of Code 83 rail! HO GP50 - DCC & Sound - Norfolk Southern #7054
Detailed Information
NS FEATURES:
Phase I Body with rounded blower housing
Long hood forward setup with high short hood
Southern style 5-chime horns on both ends
Long hood mounted bell
Dual Firecracker antennas
Timkin bearing trucks
Hood mounted walkway lights (non-operational)
Large EMD style plows and ditch lights on both ends
Built in 1980 for the Southern Railway, these distinct high nose long hood forward locomotives were painted into Norfolk Southern colors after the Southern / Norfolk Western merger of 1982. They retained most of the as built features other than ditch lights added in the 1990s.
ROAD NUMBER SPECIFIC FEATURES:
#7037
Earlier NS scheme with dashed frame stripes
#7054
Newer NS -horse-head- logo with solid frame stripes
#7085
Earlier NS scheme with solid frame stripes
GP50 LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Walkway tread
Lift rings
Sander lines
Windshield wipers
McHenry scale knuckle couplers - Kadee compatible
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504977
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme. HO 48ft Galvanized Steel Stiffened Backdrop Grain Bin - Kit
(Narrow - 2.66 inch Corrugation)
(NOTE: this backdrop bin is not a full round bin - it is cut 4ft beyond halfway to simplify placing the bin against a flat backdrop while still allowing room for the walkways, conveyors, and other equipment at the top.)
Corrugated steel grain bins are a staple in any agricultural setting, placed on farms, elevators, industries, and beside railroad tracks. Used with a variety of farm commodities, these bins provide a safe, dry place to store that commodity until it goes to market.
With several styles to choose from, these grain bins will look right at home on your layout. They feature prototypical corrugations, realistic galvanized steel appearance, various side sheet heights, and a variety of diameters.
Narrow corrugation bins have corrugations spaced a scale 2.66 inches and the rings are 32 inches tall. Wide corrugation bins have corrugations spaced 4 inches apart with 44 inch tall rings.
All bins are easy to assemble - just stack the rings, glue them together, attach the roof and you are done! Every ring comes as one solid piece, so no time consuming and messy assembly of individual side sheet pieces to create each ring, saving you time and frustration!
What size bin will fit your space? Try our grain bin size calculator or printable template.
https://www.iascaled.com/store/GrainBinSizeCalculators
https://iascaled.com/docs/ho-bin/GBM-HO.pdf HO Greenville 86ft Double Plug Door Box Car - DT&I #26753
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Release Date: August 2020 (original), August 2021 (re-release with 4 new numbers)
DTI -Original 1971- is one scheme we could not resist choosing for our first run, and for good reason. The huge DT&I lettering and compass painted on a baby blue carbody screams early 1970s greatness. The -We have the connections- logo is true, with a return route to BN in Duluth MN! Typical of Greenville builder paint schemes, the doors are not painted but left bare aluminum. This car comes equipped with ACI label and a WK routing code hand painted on the side of the car, like the prototype. While the stenciling has significant lettering variation, the small details are specific to DT&I specs, including end of car cushioning, gypsum crossover platforms, and Universal brake housing. Ah, and look closely: We even have the correct (and all-new) 100-Ton Barber S-2-C -Low Profile- trucks with Timken bearings and truck mounted brake beams. Available in 4 numbers! Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Seaboard Air Line - Delivery #102
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover N Budd RDC-1 (Ph 2) - DC/DCC/Sound - CP Rail (Action Red)
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height HO Benches (8 pkg)
Product Information
Heres a must-have detail from SceneMaster(TM) that will bring HO Scale station platforms, city parks, bus stops and more to life in minutes! The set includes eight benches that are ready to install anywhere along your railroad. For the finsihing touch, add some SceneMaster Figures, available separately.
Please Note: Figure shown in photo is not included. HO Delivery Target Red 1953+ Steel Bay Window Caboose - Illinois Terminal #980
Product: St. Louis Car Co. Illinois Terminal Steel Bay Window Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Gould plain-bearing trucks with separate brake beam part
Wheels: CNC-machined standard RP25 .110inch tread 33inch wheels
DC/DCC Lighting Features: Interior Lights
Illinois Terminal (ITC) -Delivery Target Red 1953+- is the first of three different Illinois Terminal schemes we are offering in our first production run of St. Louis Car Company cabooses. These cars feature a safety-inspired bright -target- red paint. The caboose also has other colors present on the exterior, including -canary yellow- handrails and steps. Additionally, the Standard Railway Equipment roof received a coat of light gray paint. The prototype Illinois Terminal lettering above the cupola and the ITC with road number was applied onto thin metal placards which were bolted onto the car side and had an off-white appearance, which we have replicated this -off-white- reflective color with our graphics. Similar to our NYC offerings, our models include large (unlit) oil lanterns on one end of the caboose. The fully-painted and apportioned interior for these models includes the two tone green scheme as found in the original cabooses. Check out those double bunks as you peek through the large windows. Our Illinois Terminal delivery scheme cabooses are available in two road numbers. B-100-40 Boxcar: Golden West - Ventura County - Single Car #140011
Detail Variations:
6-pack includes the following numbers:
#140000
#140003
#140008
#140011
#140013
#140016
Our B-100-40 model features the following details:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Genuine Kadee #158 Whisker couplers
Newly tooled trucks with turned metal 36 Inch wheels
Separate door rods and door tracks
Road number specific number patches
Separately applied coupler cut levers HO 1975 Cadillac Eldorado Convertible - Gold
This HO Scale 1975 Cadillac Eldorado Convertible from Brekina is based on the luxury automobile seen across North America. It was a popular car offered in sedan and convertible models. Spotting features of the 1975 include rectangular headlamps, an egg crate grille, full rear wheel openings sans fender skirts and sharper, crisper lines resulting in a sleeker appearance reminiscent of the 1967-1970 models. Only minor revisions appeared on the 1976 edition. This model features a detailed injection-molded plastic body with fine decoration, interior seats and window glazing and chrome-plated parts as appropriate. This model is ideal for your 1970s and later street scenes. Plastruct 90002 1/16in Angle HO EMD SD10 - DCC & Sound - Dakota, Minnesota & Eastern #548
Dakota Minnesota & Eastern --Conditional Announcement-
- Ex-SOO, nee-MILW units - same features
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more! HO 10 Inch Track Alignment Gauges - Curved - 38 Inch Radius
RibbonRail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking, and joining rail. Track Alignment Gauges are precision machined to NMRA standards and will work on any code of HO Scale rail. Available in many curve radii as well as straight. LokSound V5 DCC Micro 8-Pin Sound Decoder
(SPEAKER AND ENCLOSURE SOLD SEPARATELY!)
Note - If you want sound installed it the decoder, write the sound file number or the locomotive you are putting it into, in the customer comments section at the check out.
For Gauge: N, HO, & HOn3
21mm x 10mm (0.827 x 0.394 inch)
The LokSound 5 DCC Micro has an NMRA 8-pin Plug [via adapter Next18 to 8-Pin Plug] and can be plugged into a circuit board with an NMRA 8 pin female receptacle. With a footprint of 21mm x 10 mm it is one of the smallest full-featured sound decoders available. The V5 DCC Micro is also suitable for H0 locomotives where space is an issue. LokSound V5 DCC Micro decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types.
Consult your locomotive manual to determine the appropriate type of decoder.
Operating Modes:
The V5 decoder supports all DCC programming modes! There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.
The LokSound 5 decoder supports the Märklin® braking sections, ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. The locomotive with a LokSound 5 decoder will also come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.
The LokSound 5 decoder is suitable for analog DC operation, AC and DCC command control.
Sound:
The LokSound V5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and for all practical purposes, one cannot detect any difference to the original. A dual class D audio power amplifier with 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.
The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail movements. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your locomotives.
Functions:
Subject to the type of interface, every LokSound V5 Micro has at least 6 amplified outputs as well as one logic output with multiple lighting functions available. The brightness of each output may be adjusted separately.
Motor control:
The LokSound V5 Micro decoder supplies up to 0.75A motor current and motor control has been improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz results in silent operation, particularly for coreless motors making motor hum a thing of the past. Load control can now be adjusted with up to 10 separate CVs and will manage even the most difficult motor control issues. The unique Auto-Tune function facilitates the automatic calibration of the decoder to perfectly match the motor.
HO Hex Coupling Kit
Includes:
Couplings to connect 4 Hex Flywheels or do 2 locos!
Slide hex end on square shaft, cut to length, glue. Simple and easy! Hobos - 3 Unpainted Figures HO Hyundai 48ft Exterior Post - EMP #254545
PROTOTYPE TYPE:
48ft Exterior Post containers were introduced in 1986 and were a common site on nearly all double stack container trains of the later 80s, 90s, and 2000s. These containers were used for domestic freight service and were purchased by numerous railroads and freight operators in large numbers. These containers were a unique design in which the front and side container panels were supported by aluminum channel posts mounted outside of the container box to provide additional capacity space for larger pallet stacks within the container interior. The posts are a simple spotting feature for these styles of containers. Hyundai was one of a handful of manufacturers of exterior post containers, and while nearly-identical in design to one of their competitors, the additional drainage channel on the top of the container at the head end, and full-height end corner posts differentiate this container from its competitors design. Some of these containers served secondary lives for more than one operator, leading to some interesting graphic combinations over their lifespans. Changes to over-the-road length allowances for 53ft containers and trailers brought about the eventual demise of the 48ft container and a majority of them were withdrawn from service during the mid-2000s and beyond, though limited numbers still remain in service today.
FEATURES:
Hyundai Roof Configuration Version:
A unique feature of the Hyundai design was the additional water drainage channel near the front end of the container and the forward vertical framing members that extended the full height of the container. We have modeled the detail that differentiates this container from those of other manufacturers of 48ft exterior post containers.
Sharp And Accurate Paint And Lettering:
Classonemodelworks.com provides accurate paint and lettering taken from photographs of the prototype, and numbering that matches the class numbers for each operator or railroad. Our containers come with the exterior posts already painted to match the aluminum color of the prototype containers and galvanized coloring for the upper and lower structural channels.
Accurately Dimensioned:
These containers have been accurately reproduced from hand-measured field dimensions of the actual containers, right down to every visible detail. Classonemodelorks.com stands for accuracy and we strive to provide that with every model we produce.
Accurate scale Door latching Details:
Classonemodelworks.com believes in providing models that accurately depict the prototype equipment. Keeping that as our core, we are proud to provide highly-detailed cast door locking bars, latching mechanisms, door bumpers and angled bar lifter. Spray Can - Metallic Gold (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint. HO Chemical Tankcar - Procor (3pkg)
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Wireform safety handrails
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 15inch HO Horizon Club-Dinette - Amtrak (Phase lV) #58103
PHASE SPECIFIC FEATURES:
- Half dinette, half business-class seating
- Modified parlor end-doors
- Fixed end-door steps
GENERAL FEATURES:
- Coach, Dinette, Club-Dinette car body styles
- All-new ADA Coach cars
- All-new car numbers
- Full underbody and interior detail
- Correct GSI G70 trucks with metal wheelsets and reliable power pickup
- Accurate painting and lettering
- Tinted windows
- Improved interior lighting in both DC and DCC
- Independently-controllable end marker lights
- Metal side grab irons
HO 40Ft PS-1 Boxcar - ATSF (Bx57 Grand Canyon) #31740
Date: BLT 5-50
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch N Scale Scenic Accents(R) Figures -- Checker Players HO Operating Ground Throw - Sprung 0.190 inch Travel
Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw.
Molded on pin for direct mounting. Plastruct 91005 Gray ABS 0.060 (2pcs pkg)
Specifications In Inches:
Thickness: .060 (1.5mm)
Width: 7 (175mm)
Length: 12 (300mm)
HO Scale - 1966-77 GMC 9500 Low Mount Cab Tandem Axle Short Hood Tractor - Unpainted and Resin Cast Kit Norfolk Southern Locomotive Directory 2006-2007 148 pages, 6 x 9inch, softcover, 200+ photos, unit-by-unit listing of every unit on the NS roster on January 1, 2007.
HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) #742975
1935+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory. HO Jordan Spreader - Kit - Undecorated
Now you can add one of the most versatile machines every built to your maintenance-of-way fleet with the Walthers Proto Jordan Spreader! Used to profile and grade drainage ditches during warmer weather, when the flakes start flying, Jordans can be found plowing snow and pushing it back from the tracks. These HO replicas are based on the model 2-200 Spreader-Ditcher-Snowplow used by dozens of railroads, which have been in service year round since the 1920s. Featuring all-new tooling, the models are a perfect companion to the Walthers Proto Russell Snowplows (sold separately) and feature:
-Limited edition - one-time run of these numbers
-Factory-installed grab irons
-Positionable wings and moldboards can be raised and lowered
-Built tough with durable metal hinges and other details
-Complete underbody with brake gear and piping
-Thin profile stirrups
-Cab window glass
Railroad-specific details:
-Horizontal or vertical air reservoir
-Original or one of 3 later headlight styles as appropriate
-70-ton roller bearing or Bettendorf trucks as appropriate
-Single-chime air horn placement
-Ultra-smooth rolling metal axles and 33in wheelsets
-Proto MAX(TM) metal knuckle couplers
HO GE C30-7 - DCC Ready - CSX (YN2 Scheme) #7047
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s. Great Lakes Freighter Kit - Unpainted and Resin Cast
Our Great Lakes Freighter is patterned after a St. Lawrence canaller. While canallers have the look of a typical freighter, they were much shorter, as their size was restricted by the locks on the St. Lawrence River prior to the Seaway opening in 1959.
This is an ideal prototype, as no selective compression is required to have a layout sized boat. It is also suitable for most modeling eras, as these boats sailed from the turn of the century, with some surviving up into the early 1980s. Common commodities for these boats would include coal, grain, cement, and iron ore.
Kit includes all parts, fittings, and accessories for a complete model, including etched brass stanchions, and a fully detailed wheelhouse interior. Main structural assembly is simplified by the use of one piece castings. Model measures 36inches in length and 6inches wide, representing a 258ft long freighter. Additional mid-sections are available separately for those who require a longer boat.
Twin Lamp Post - 3 sets
Use to light street corners, sidewalks, parks, rail yards and more. 20mA/set RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 0.484 in w x 2.76 in h (12.3 mm w x 70.1 mm h) HO MLW M420 A/B Set - DC/DCC Ready - British Columbia (Lightning Stripe) #642, 686
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #676712
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory. HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Western Pacific #20001
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #137313
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory. Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low profile? Barber S-2-A with Timken rotating caps
Wheels: CNC-Machined 36in Wheels
Detroit Toledo & Ironton (DTI) Delivery 1970 Magenta shows off one of the most-requested paint schemes for the Tangent Greenville 86ft Box Car System. We appreciate the patience of DT&I modelers, as we wanted to get this car right with the correct 1970 Greenville body with accurate DT&I Magenta paint and lettering. This Magenta DT&I group totaled 54 cars ? It was also the first group to be delivered for use in the new Ford Brownstown Parts Distribution facility pool. Yes, these cars were pooled, so that means these beautiful Magenta 86ft giants served Ford US Parts Depots coast to coast in the Ford BRO pool lanes. Note the prototype photo on our website that shows a DT&I BRO car behind a GN painted, BN-restenciled SD45 presumably photographed on BN headed to Seattle. The DT&I cars feature the distinctive Brownstown body style, with extra vertical rivet rows at the ends of the side sheets. An accurate End-Of-Car Cushioning underframe shows off the 100-Ton Low profile Barber S-2-A trucks, 36in wheels and Timken rotating caps. HO Mark IV Code 100 Right Hand Curved Turnout
This Atlas Code 100 Customline Curved Turnout features nickel silver rail and black plastic ties that match other Atlas Code 100 trackage. This turnout can be set up as a remote or manual switch depending on which switch machine is added by the modeler. The turnout also features die-cast points and an isolated, die-cast metal frog with a power contact. You can use this power contact option to energize the frog and prevent loss of power when a locomotive is passing through. The outside radius of the turnout is 30 inches and the inside radius is 22 inches. ADMX #52340
(gray, blue; Molecule Logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. They have worn a wide range of colorful paint and lettering schemes over the years, 59ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59ft Cylindrical Hoppers feature:
Limited Edition - one time run of these roadnumbers!
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36In turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers HO Code 83 Snap Track - 15 Inches Radius Curve
Brown Tie, nickel silver rail.
Pricing is per single piece.
All Atlas code 83 track has brown ties and nickel silver rail.
12 pcs. to circle HO EMD SD9 - DC/Silent - Baltimore & Ohio #771
Baltimore & Ohio
- Correctly oriented cab interior for long hood forward operation
- Single fuel tank (First time done on a plastic model!)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more! HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - Santa Fe (ATSF) #350019
Product Information
Serve a wide range of HO industries with the 37ft 2980 Cubic-Foot Two-Bay Covered Hoppers from WalthersMainline. Based on prototypes introduced in the late 1980s, they can be found hauling cement, fracking sand, roofing granules and similar loads. Features of the layout-ready models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from late 1980s to the present
Separately molded and applied hopper gates
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately HO Alco RS-3 - DCC & Sound - Spokane, Portland & Seattle - as delivered - #94
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. DCC/Sound version features LokSound V5 decoder.
Plastruct 90408 ABS 1in Warren Open Web Truss (2pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1
HEIGHT IN MM
25.4mm
WIDTH IN INCHES
1-27/32
WIDTH IN MM
46.8mm
THICKNESS IN INCHES
5/16
THICKNESSS IN MM
7.9mm
LENGTH IN INCHES
12
LENGTH IN MM
300mm
USE DESCRIPTION
ABS OPEN WEB TRUSS – WARREN STYLE 2 Use for roof trusses, bridges, conveyors, space frames and other steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or pro PS-2 2003 2-Bay Covered Hopper - Denver & Rio Grande Western #18010
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers 1956 Chevy 210 Four Door Sedan - Unpainted and Resin Cast Kit Plastic-Insulated Transition Rail Joiners pkg(8) -- Code 83 to 70 North American-Style - Code 83 #6 Turnout - Streamline - Right Hand, Unifrog HO 73Ft Center Partition Car - Union Pacific #275189
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius HO 53ft Jindo Container - CSX (How Tomorrow Moves) UMXU Set #1 (3pk)
(#232521, 232604, 232651) (BLUE/YELLOW)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting HO Alco FA-1 & FB-1 Set - DCC & Sound - Canadian Pacific (Script Scheme) #4015, 4406
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds HO EMD SW9 - DC/ Silent - Canadian Pacific (CP Block Scheme) #7405
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Canadian Pacific:
Delivered in 1953 / GMDD
Short side handrails
Small number boards next to the headlight
Large barrel style headlight
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor HO RTR 40Ft Single-Door Steel Boxcar - Western Pacific #1953
(orange, silver, black)
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. Check out the entire line of Bowser HO Scale ready-to-run boxcars. HO Coal Trestle - Kit
DIMENSIONS:
24-1/2 x 4-3/8 x 1-3/4 inches (62.3 x 11.1 x 4.4cm)
Make quick work of coal deliveries in tight spaces with the HO Coal Trestle kit from Cornerstone! Installed in tight city lots and rural locations, the prototypes used gravity to speed unloading (and return to the railroads) of hoppers from the 1900s to the 1960s.
FEATURES:
- Molded ramp simplifies modeling track on grade
- Detailed trestle with supports, abutment, railing and walkway - optional bulkheads to build below-track storage bins also included
- Separate coal conveyor - prototypes also moved sand and gravel from hoppers to trucks
- Great addition to trackside coal dealers, lumber and building materials yards, heavy industries and more HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (Sand) #7021
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box HO Brass Chain - 12 Inches - 27 Links Per Inch
A-Line Chain is great for detailing all kinds of models in all scales. Available in a variety of sizes measured as links per inch, chain is also available in multiple kinds of metals. HO EMD SW9 - DC/ Silent - Erie Lackawanna (EL Gray & Maroon) #437
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Erie Lackawanna:
1970 Repaint
Optional -beehive- style spark arrestors with short stacks in polybag
Deck mounted side handrails
Carbody style handrails
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years. HO USRA Double sheathed wood boxcar
Wabash
Includes road numbers 79687, 79834, 79945, 80176
During World War I the US railroads were struggling to keep up with wartime traffic, in part because of a shortage of service- able freight cars. In an attempt to solve this problem, President Wilson nationalized the railroads under the United States Railway Administration, or USRA. One of the first tasks assigned to the USRA was to develop common designs for new freight cars. Among these was a 40ft double-sheathed wood boxcar with a fishbelly steel underframe.
Starting in 1918, nearly 25,000 copies of the double-sheathed boxcar were built and delivered to 24 railroads throughout the country. The cars were well received, and many cars continued in regular service on many roads into the 1950s with many updated to the newer AB-brake system.
Rapido’s new model of the USRA double-sheathed boxcar features an all-new body with correct fishbelly underframe and correct free-standing details. Models will be equipped with either KC or AB brakes as appropriate. These cars fill a need for a state-of-the-art model of this common car on any transition-era or earlier period layout.
Model Features
Accurate new tooling
Correct details including roof and handbrake
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Accurate decoration
Fully decorated and assembled
Factory-installed Macdonald-Cartier couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels WalthersMainline HO EMD SD70ACe-DCC ready Union Pacific
Bring the power of todays railroading to your HO Scale layout with the WalthersMainline EMD SD70ACe diesels. Starting with the SD70 introduced in 1992, the prototype underwent a number of upgrades and in 2005 the more powerful SD70ACe was unveiled with AC traction motors. Today, these colorful locos can be found on the rosters of lines big and small. Nicely detailed and affordably priced, additional features include:
Limited edition - one time run of these road numbers!
One of the backbones of contemporary loco fleets
Prototypes in service 2005 to the present
Easily handles 18in radius curves (22in or larger recommended)
LED Lighting includes:
High or low headlight per prototype
Working front ditch lights
Constant and directional lights
Fully assembled
21-Pin DCC plug
Same powerful drive as WalthersProto(R) locos featuring:
5-pole skew-wound motor
14:1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Dual machined brass flywheels
Heavy die cast metal chassis
Molded drill starter points for grab irons - easily added with SD70ACe Diesel Detail Kit (910-251, sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Make your WalthersMainline SD70ACe more realistic with these accessories, available separately:
SD70ACe Detail Kit
Walthers Double Ended Pin Vise
Walthers Drill Bits
HO 19,600 Gallon Tank Car - Cerestar (NATX) #190145
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Built: BLT 11-99
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127408
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (NATO Green) #7020
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box Athearn HO Scale - RTR 30,000 Gallon Ethanol Tank Car - CTCX - #1 - 3pack
Detailed Information
301135, 301140, 301155
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in HO Trinity 3-Bay Hopper - AGPX (3pk) #1
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust HO Elevator Add-on Silos - Kit -
This kit measures: 9 x 4-1/2 x 9 in (22.8 x 11.4 x 22.8cm)
This Cornerstone structure kit provides parts to build four matching concrete silos for the ADM(R) Grain Elevator (933-3022 sold separately) and lengthen the corrugated metal headhouse. HO EMD SD70M-2 Diesel - DCC & Sound - Providence and Worcester Railroad P&W #4301
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
PW FEATURES:
Former FEC units
Repainted into orange and black
Horns mounted on the side of the long hood; separate horn styles for each road number
P&Ws two units were originally painted orange and brown and ran for several years in this guise. In 2021 they were repainted into the orange-and black scheme of parent company Genesee and Wyoming.
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box N Budd RDC-1 (Ph 2) - DC/Silent - CP Rail (Action Red)
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height HO EMD GP40 - DCC & Sound - SSW/ Cotton Belt #7607
1966+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO 50Ft PCF B70 Boxcar - w/ Youngstown Doors - SSW/Cotton Belt (with DFL) #66830
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership. G2 Dash 9-44CW - DCC & Sound - FMG #007
ETA: Late October 2022
Detailed Information
FMG FEATURES:
Spare knuckles on rear pilot
FMG-specific handrails with extra railing
Front-only ditch lights mounted on anticlimber
Nathan K5LA horn
FMG NOTES:
Part of a late-production MRL order, these SD70ACes also feature 6-step walkways like the BNSF units. The MRL units have standard GPS dome antennas on the cab roof.
The railways 240-wagon iron ore trains are amongst the heaviest trains in the world. The 1,435 mm (4 ft 8 1⁄2 in) (standard gauge) heavy haul railway is used by 35,200-metric ton (34,644-long-ton; 38,801-short-ton) trains up to 2.5 kilometres (1.6 mi) long carrying 29,000 metric tons (28,542 long tons; 31,967 short tons) of ore at 40-tonne (39-long-ton; 44-short-ton) axleload (the weight of the two 4,000-horsepower (3.0 MW) engines is extra). The railway is available to other miners for a fee.
FMG rosters a fleet of high horsepower 6-axle locomotives, including 15 Dash 9-44CWs.
DASH 9 SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box Tru Color Paint 044 - Acrylic -Penn Central Green 1 oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). GLa 2-Bay Hopper: PRR Shadow Keystone - 6(pkg)
Features:
All-new tooling
Scaled from original blueprints
Die cast frame and floor for optimum weight
Full interior rivet and bracing details
Factory installed wire grab irons
K- or AB-brake gear installed as appropriate
Factory installed Kadee #158 couplers in narrow draft gear box
Turned metal wheels in correct PRR 12D-F8 trucks
Accurate paint and lettering
Multiple road numbers available for each paint scheme and railroad
Detail Variations:
As operated from 1954 to 1961
6-pack includes the following numbers, all individually packaged:
#153843
#154123
#155472
#701626
#702186
#705934 F30A 50Ft Flat Car: Penn Central #701550
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
PRR X31A Double-Door Boxcar: Shadow Keystone, Late - Single Car #69287
Detail Variations:
6-pack includes the following numbers:
#69007
#69156
#69287
#69371
#69483
#69492
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale G2 SD70M-2 - DCC Ready - CN #8921
Genisis 2.0 Features:
See-through pilot steps, Lit Marker Lights (CN)
LIT numberboards & ground lights
Detailed Information
CN NOTES:
Part of CNs large fleet of SD70M-2s, these units are equipped with operating marker lights for DPU service. As part of the railroads new heritage program, CN 8952 was painted in the GTW scheme, and CN 8898 received the the special placards celebrating CN independence on the sides of its nose.
ROAD NUMBER SPECIFIC FEATURES:
#8898
White cab roof
CN heritage decals on each side
#8921
Standard CN Web Address paint scheme
#8934
Mismatched compartment doors on left side
#8952
Grand Truck Western Heritage Unit
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Etched see-through steps
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage Diesel EMD SD40-2 - Saint Lawrence & Hudson #5627
ESU LokSound DCC & Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch N Scale 1970 Bedford RLHZ Green Goddess Self-Propelled Pump - Glamorgan Fire Service HO Galvanized Culvert Pipe - 24 Inches (4pk)
Specifications
Scale: HO (1:87)
Sizes: 0.28 inch
Length: 3.4 inches
Galvanized steel culvert pipes have been around for over a century and serve many purposes from storm sewers to drain pipe and even irrigation. Found where roads or railroads cross low lying areas, streams, or other waterways, these galvanized pipes provide a pathway for water to flow while reducing erosion at these critical crossings.
Suitable for any era, these galvanized culvert pipes will look right at home on your layout. Each HO-scale pipe section is 25 scale feet long and comes in a variety of diameters, suitable for many different applications. Hollow throughout, each pipe features realistic corrugations both inside and out. HO 40Ft Hi-Cube Dry Containers - Maersk Sealand (3pk) Set #1
3 pack road numbers include : MSKU 836088/836426/836519
Body: Type A
Door: Type C
Latch: Type C
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before. HO Vintage Firearms & Sporting Signs - 1940-60s (40)
Vintage Firearms and Sporting Signs printed on 2 paper sheets. All-New bluetooth controlled Tsunami2 DCC Sound Decoder
Blunami will change the way you enjoy the model railroading hobby
The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.
Currently the app is only available for Apple iOS devices (versions 8 or newer). The app offers an easy graphic interface to adjust all Blunami settings and features with drop-downs and slider bars. All programming can be done through the app, as well as with your DCC system. You no longer need to understand CVs or own a command station to run your trains!
HO Pressureaide Covered Hopper - Archer Daniels Midland (Leaf) #50016
(gray, blue, green, Leaf Logo) 1:87 1966 GM 4107 - Indiana Motor Coach Co. HO 40ft ACF Modernized Welded Boxcar - Detroit & Mackinac #3118
FEATURES:
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers HO UAC TurboTrain Additional Coach: Late Amtrak
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model. N Scale 1978 Ford Fairmount Sedan - Black
Features:
Side view mirrors
Head and tail light glazing
Interior detail
Simulated rubber tires
Under carriage detail HO 59Ft Cylindrical Hopper - Toronto, Hamilton & Buffalo #1505
(black, white; Bow Tie Logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
One time run of these roadnumbers, order now - limited quantity available
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers Great Lakes Steam Diesel Tugboat Kit - Unpainted and Resin Cast
(1/87 Scale)
These steam tugs were seen all over the Great Lakes from 1900 until their conversion to diesel during the 1950s. This kit is a waterline model, based upon the Great Lakes Towing Companys 81 L.C. Sabin.
-Cast Polyurethane Resin Kit
-Easy Assembly
-Details Moulded in Place
-Accurate
-Less Trucks and Couplers
Try Sylvans Resin Prep! Helps prepare your model for painting!
Part #SSM-A001
Carrier Reefer Unit
Kit - Fits Any Semi Reefer Trailer
NO More to be Made Again !!! HO SW1000 Switcher - DCC & Sound - BNSF #3617
ETA: June 2023
Detailed Information
BNSF FEATURES:
Roof mounted beacon (Flash function in DCC only)
Fire cracker antenna
MU hoses
Winterization cab window
In the late 1960s CB&Q purchased a small group of EMDs new SW1000 switching locomotive that were incorporated into the new Burlington Northern roster after the 1970 merger. BN then purchased their own SW1000s shortly thereafter. In 1996 that fleet was then absorbed into the BNSF roster while retaining the BN green and white paint scheme. That BN heritage is clearly demonstrated in this Primed For Grime release. Many of the SW1000s retained their green paint up until retirement from the BNSF roster.
SW1000 LOCOMOTIVE NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SW1000 LOCOMOTIVE STANDARD FEATURES:
Lit ground lights
Detailed cab interior
Drop steps unless noted
MU stands
Exhaust stack
Printed numberboards
Fine scale handrails
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Cube Speaker for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Excellent low-speed operation
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust HO EMD GP7R - DC/DCC Ready - Chicago & North Western CNW #4140
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
CNW FEATURES:
NEW! Non-Dynamic with roof access hatches
1700-gallon fuel tank
Partial skirting above fuel tank
All-weather firemans side window
Flashing xenon strobe (in DCC mode only)
Wheel bearings per prototype
Era: 1982+
Era: 1993+
Era: 1982+
Chicago & North Western-
-Union Pacific Licensed Product
These Ex-CRI&P units were purchased by C&NW second-hand from Precision National in 1981, serving the railroad in a variety of service for the next 15+ years. 4160 became inoperable in 1998. In 2007 it was moved to the Illinois Railway Museum and repainted into the blue and white Rock Island paint scheme.
ROAD NUMBER SPECIFIC FEATURES:
#4140 Phase III body, 5-Chime Horn, Firecracker antenna, Front snowplow
#4160 Phase II body with 86inch Doors, 3-Chime Horn, Spark arrestors, Front snowplow
#4193 Phase II body with 86inch Doors, 5-Chime Horn, Front snowplow
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch HO SD38 - DCC/Sound - CanDo Rail Services #5201
CCGX FEATURES:
CanDo Rail Services is a contracting company based out of Brandon, Manitoba, Canada. They preform track maintenance for large industries, operates as a shortline, and contracts switching services in Ontario, Manitoba, and Alberta Canada.
ROAD NUMBER SPECIFIC FEATURES:
#5201
- Ex: DMIR. Short fuel tank
- triple clasp brakes
- M3 horn
- UP style plows
- all-weather windows
- ditch lights on both ends
- Classified as a SD38AC
#5202
- Ex-BLE. Medium fuel tank
- high-mount truck brakes
- M3 horn
- UP style plows
- all-weather window
- ditch lights on both ends
- Classified as a SD38AC
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
Plate ACI Placards -8pkg
In 1967 the rail industry introduced a nationwide system to track freight cars as they moved across the railroad network. The visual result of this technology was the application of ACI labels to the side of freight cars. These labels – or placards – were required on all freight cars from 1968 to -1979, although the labels lasted far longer than that and can still be seen today. These finely-executed placards allow you to reproduce this detail on your freight car fleet, and include correct dimensions. HO ET44 Tier 4 - DCC Equipped - Kansas City Southern #5008
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units. Light Rust Deposits
The perfect product to recreate a rust texture in a light rust color in surfaces of vehicles or accessories. Once they are dry, they have the same scale appearance as real crusted rust. The finish is extremely authentic and can be combined with other tones for more realism. HO RTR 45Ft Fruehauf Z-Van Trailer - Southern Pacific #250111
Detailed Information
MODEL FEATURES:
Separately applied mud flaps
Rubber tires
Fully-assembled and ready to use out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration HO Flexi-Van 40ft Trailer - Milwaukee Road #3 (2pk)
(logo and Flexi-Van Placard; side doors)
Capture the color and variety of early intermodal operations with SceneMaster flexi-van trailer 2-Packs! Introduced in 1958 with removable wheels for use on specially-equipped flexi-van flatcars, they were later converted to standard 40ft trailers for road and rail service and served into the 1980s.
FEATURES:
- End or side doors as appropriate
- Detailed wheels and bogie with landing gear 1:87 NFI Xcelsior XN40: DDOT Detroit
FEATURES:
-Diecast metal.
-Pad-printed graphics.
-Very limited edition!
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX (6 pkg) #4
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Includes Road Numbers:
21125
21173
21200
21212
21268
21294
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate HO Lightweight Coach - Amtrak - Phase I #6445
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper HO Enterprise 2-Bay Covered Hopper - GFCX #110
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme Code 83 Snap Track - 3 Inches Straight - 4 pcs in blister package
Brown Tie - 3 inches per section HO Just Plug Lighted Vehicle - Green Pickup
This little pickup still has a few thousand miles left and is up for anything!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle) HO 45ft CIMC Container - Crowley
(brown, white)
FEATURES:
- Based on common size & style used worldwide
- Fully-assembled & ready to use
- Colorful paint & lettering schemes
- Separate door latch details
- Realistic loads for WalthersMainline(R) & WalthersProto(R) well cars, sold separately
- Great detail for terminals, highways & industrial scenes HO Scale GP38 - DCC & Sound - Santa Fe (Yellow Warbonnet w/ Class Lights) #2337
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO Flatcar w/Logging Crane - CP Rail #304860
(Red, black, Multimark Logo)
This Walthers Trainline HO Scale Flatcar with Logging Crane is great for adding to any freight train on your layout or train set. Trainline freight cars feature RP-25 metal wheels for superior performance on all kinds of track including smaller scale-sized Code 70 and larger rail. With their added weight, body-mounted knuckle couplers, and wheel tread matched to National Model Railroad Association standards, wheels on Trainline rolling stock are compatible with almost all North American HO model railroads and can be used as you expand your railroad. Other features of this Flatcar with Logging Crane include molded details that stand up to handling during operation and realistic paint schemes for good looks.
-Fully assembled, ready to run
-Perfect for use with Trainline Log Dump Cars
-Colorful paint and lettering schemes
-Fully assembled, ready to run
-Use with any HO Scale train set
-Body-mounted magnetic knuckle couplers
-RP-25 metal wheels
N Scale 60ft Coach Car - New York Central #1959
FEATURES:
- Based upon C&NW and CNJ prototypes
- Full scale dimensions and details
- All cars include separately applied window glazing, diaphragms and roof vents
- Observation car includes separately applied end railing details and a drumhead
- Detailed interiors (excluding baggage car)
- AccuMate operating knuckle couplers Ultra Fine Red Sable Brush - Size 3/0 All Scale Classic Trees - Ready Made - Early Light 5-6inch (2 pkg)
5 to 6inch, 12.7 to 15.2cm Tall
Product Information
Make Realistic Scenery in Minutes
Give your layout a change of scenery with Woodland Classic Trees from Woodland Scenics. Fully assembled and ideal for foreground detail, the selection includes several types of trees along with hedgerows. The models are finely detailed with painted, flexible trunks and foliage with natural contrast to enhance any layout or diorama. A unique planting pin and detachable base allow for temporary placement, or ease of removal for cleaning and maintenance. Easily mixed and matched to capture the variety found in nature, trees range from 3/4 to 9inch tall, making them ideal for modelers in all popular scales. Small Wooden Coaling Station - Kit
3 x 5-5/8 x 7-13/16 in
(7.8 x 14.1 x 19.7cm)
Steam-era modelers - especially those of you with limited space - check out this Small Wooden Coaling Station from Cornerstone! Based on a 40-ton capacity prototype, its a perfect combination of compact footprint and terrific detail ideal for branch lines, short lines, or smaller end-point terminals.
Features of this detailed HO structure kit include:
Signature steam-era structure!
Based on a 40-ton capacity CB&Q prototype
Typical of small towers used on many railroads big or small
Compact footprint ideally sized for most HO layouts
Highly detailed support timbers, machinery house, grate, coal chute, counterweights and more
Use alongside other Cornerstone structures (each available separately) to build a complete engine terminal
Molded in gray plastic
HO Milton A. Corporation - Kit
This kit is built up from individual components from several of our existing Pikestuff kits. We have done the kit-bashing for you by providing you with the parts and instructions to build a unique building from the Pikestuff inventory. A small amount of cutting is required without cut lines but cutting the soft plastic is easy and the instructions will guide you through each step along the way.
Dimensions: 4-1/8 X 8-1/4 and 9-3/4 X 11 inches X 7 inches tall. HO 85ft General American G85 Flatcar - Erie Lackawanna #8737
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches HO 37ft General American Meat Reefer - Armour #11890
Rapidos 37ft Meat Reefers Feature:
- Complete underbody with all piping
- Super-detailed Barber S-1 trucks
- (Insulated turned blackened metal wheelsets)
- Accurate roof hatches and hardware
- See-through brake platforms
- Separate grabs, ladders and roofwalk
- Accurate paint schemes
- Multiple car numbers per scheme
- Factory-installed Macdonald-Cartier couplers
- Available in singles or multi-packs.
All Scale Learning Kit - Rock Faces
Learn to make, install and color realistic rock formations. The kit contains enough product to make four to five rocks.
Value-packed tools specifically developed to teach beginning modelers and other hobbyists how to use the Terrain and Landscape Systems. Learn to sculpt terrain, cast, color and install rocks, landscape various scenes, create paved areas, make trees, model water features and other scenic details. Reseal packages for easy storage. HO 2600 Gallon Fuel Tank Set - EMD HO 60ft NSC 5150 3-Bay Covered Hopper - Cargill (ICMX) #1007
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended. Western Cullen-Beacon Set (6) HO GE Type Air Filter - Set w/Mount & Pipes N Scale Pole-Mast LED Street Light - 6.5cm Tall
Faller N Scale LED streetlights are perfect for illuminating scenes on your layout. Each has long-lasting LEDs complete with wired-in resistor for easy connection to 12 to 16V power. Athearn Roundhouse HO 50ft ACF Boxcar AD&N #8102
Detailed Information
MODEL FEATURES:
70-ton Roller Bearing trucks with 33in wheels
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Body mounted McHenry operating scale knuckle couplers
Wheels with RP25 contours operate on Code 70, 75, 83, 100 rail
Minimum radius: 18in
Specifications
COUPLER STYLE: McHenry Scale Knuckle HO F89F Trailer - RTTX/Yellow #151894
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast underframe
- Wire formed brake plumbing
- Detailed deck
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Minimum radius: 22 inches
- Recommended radius: 24 inches Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - New York Central - Capital Scheme #8005
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover HO 10 Inch Track Alignment Gauges - Curved - 30 Inch Radius
RibbonRail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking, and joining rail. Track Alignment Gauges are precision machined to NMRA standards and will work on any code of HO Scale rail. Available in many curve radii as well as straight. HO USRA Single-Sheathed Boxcar: PRR (Youngstown door)
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels Tru Color Paint - Acrylic - GO Transit Dark Green - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). Oval Speaker - 25 X 14mm
This small speaker is perfect for narrow hood diesels and anywhere else where space is at a premium.
Dimensions: 25 x 14 x 5.2mm(D)
Frequency Response: 740Hz - 4kHz
Power: 1 Watt (Nominal) 1.5 Watts (Peak)
Impedance: 8 Ohms HO 40Ft Boxcar w/ Early Improved Dreadnaught Ends - Great Northern (Chinese Red) #21901
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme Built-&-Ready Landmark Structures - Dansbury Depot
Assembled - 7-1/2 x 5-9/16in (19 x 14.1cm)
The most important building in any small town is the local depot. A gateway to the outside world, it was also the first thing a visitor saw when they stepped off the train! As a result, railroads went to great lengths to build attractive stations, painting them in company colors and adding a variety of trim to make the basic structure more handsome.
Small towns along your line will be delighted to have this building alongside the tracks. Its complete with a high platform, nonworking train order signal and platform lamps, luggage, baggage wagon, benches and much more.
HO Evans 100 Ton Coil Car - Chicago & North Western #39603 HO EMD SD9 - DCC & Sound - Chicago & North Western #6605
Chicago & North Western
- Rebuilt at the Oelwein Shops with chopped down nose - a first in HO Scale!
- Modified panels on side sills of locomotive
- Modified/plated over details of dynamic brake blister (Smooth plating over where grilles once were)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more! HO AutoFlood III RD Coal Hopper - PGNX #1180
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO Coarse Turf - Burnt Grass FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends HO Single BiLevel Commuter Car - Metrolink (White Ribbon) #187
Los Angeles - Series 3
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality HO 53ft Jindo Container - Canadian Pacific Set #1 (3pk)
(#234415, 234423, 234448) (RED/WHITE)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting Acrylic Flat Colors - Flat Aluminum - 3/4oz (23mL) Bottle
XF-16
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish. HO Scale - 46/47 Mercury Half Ton Flatbed- Unpainted and Resin Cast Kit Amtrak Phase 3 (late) - set #4
Consist numbers- 156, 157, 179, 180, 181
Turboliner features:
Accurately designed using original blueprints and field measurements
Tinted windows, full interior details and flicker-free interior lighting
Separate factory installed grab irons
Full underbody details and highly-detailed trucks, including third-rail shoes
Both Power Cars come with smooth, reliable drive systems for optimal performance
Working headlights, marker lights and cab-mounted strobe lights
DCC models feature accurate sounds sourced and remastered from original videos HO Steam Turrett - Brass Casting HO Ashmore Hotel - Kit
DIMENSIONS:
8-5/8 x 4-7/16 x 13-7/8 inches (21.9 x 11.2 x 35.3cm)
The Walthers Cornerstone HO Scale Ashmore Hotel is a high-rise structure that is ideal for any downtown or big city layout scene. This 11-story building features a granite facade and ornate trim. Its easily customized using three street-level facades that represent the early 1900s, the 1950s and the modern era making it great for steam or diesel-era layouts. Modular design also allows you to combine kits for a longer, wider to taller model and it can also be built as a background structure against your painted or printed backdrop scene to add depth.
HO 1976 Chevy Stepside Pickup - Midnight Black
This pickup is perfect for North American street and highway scenes. This detailed truck features a die cast metal body, interior seats, window glazing and authentic decoration. Perfect for rural scenes or carting loads around town, this truck is a great addition to any 1970s and later layout scene. 85ft General American G85 Flatcar - Trailer Train - Santa Fe #89775
Product Information:
Limited edition - one time run of these road numbers
Prototypes handled trailers and containers from 1961 to mid-1980s - used for general service loading into the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in up or down position or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
33In turned metal wheelsets
Proto MAX metal knuckle couplers
Add more realism in minutes with SceneMaster trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24In
HO Bi-Level Auto Rack - UP Rack/TTGX Flat Car #981785
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
Spray Can - Medium Sea Gray #2 (RAF) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface. Metra #99
Model Features:
•Scaled from field measurements & diagrams of a GO F59PH
•End metal handrails with plastic stanchions
•Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
•All-metal etched grilles
•Full cab interior
•Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
•Operating headlights, rear light, and ditch lights
•GO units feature functioning tri-color class lights (white, green and red)
•American units feature functioning red marker lights
•Accurate sounds recorded from a GM 12-710G3A
•DCC/Sound units come equipped with an ESU LokSound decoder
HO MLW M630 - DCC & Sound - CP Rail (Multimark) #4570
5inch stripe w/water expansion tank, no ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound V5 decoder.
Bowser does not recommend LOK sound locos for use on DC layouts. HO 89Ft Flatcar w/Tri-Level Open Auto Rack - St. Louis San Francisco Rack/ Trailer-Train Flatcar #913646
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers HO N5 Caboose - Reading & Northern #477514
N-5 Caboose – now with separate hand grabs!
Ready to Run with added brake wheel, air tank, brake cylinder, triple valve, free rolling trucks with metal wheels and knuckle couplers. 1/4 inch OD Round Brass Tube - 0.029inch Thick x 12inch Long
Round Brass Tube (1 pc)
Outside Diameter: 1/4 inch Detailed Information
MODEL FEATURES:
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
McHenry scale knuckle spring couplers installed
Painted and printed for realistic decoration
Weighted for trouble free operation
33in machined metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
The use of ice to refrigerate and preserve food dates back to prehistoric times. Through the ages, the seasonal harvesting of snow and ice was a regular practice of many cultures. By the turn of the 20th century, manufactured ice became more common. The Pacific Fruit Express (PFE), for example, maintained seven natural harvesting facilities, and operated 18 artificial ice plants. Their largest plant (located in Roseville, California) produced 1,100 tons of ice daily, and Rosevilles docks could accommodate up to 254 cars. At the industry’s peak, 1,200,000 tons of ice was produced for refrigerator car use annually.
A late-19th century wood-bodied reefer required re-icing every 250 miles (400 km) to 400 miles (640 km). The typical ice-bunker reefer from the 1920s were originally constructed with wood sheathing. Later, these early wood constructed cars would be replaced with steel constructed cars with plywood interiors by the 1940s. Vents in the bunker at the end of the car, along with slots in the wood floor racks, allowed cool air to circulate around the contents.
Specifications
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1940 - 1960
Minimum Age Recommendation: 14 years
Is Assembly Required: No HO HEP E8A + A Set - DCC & Sound - Canadian National (Executive - Noodle) #102/103
The IC and CN E9A Details Include:
Photo courtesy of Craig Walker
Correct HEP muffler and hatch
Modified pilots
Blanked sides with appropriate grille work
Roof-mounted cooling coils
Non-skirted fuel tanks
Hyatt roller bearing journal covers
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Accurate E8 sounds provided by ESU LokSound
Complete lighting effects ? headlights, recessed ditch lights in nose, class lights, backup lights, ground lights, cab lights and more. (Not all lighting features will work in DC mode.)
Numerous road-specific detail parts in both plastic and etched metal. HO International 4300 Utility Truck w/Drill - Assembled - White
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Position-able Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
Introduced in 2002 to replace the 4000-series trucks of the 1990s, the medium-duty 4300 was built in three variations and became a very popular chassis for a variety of commercial applications. Today, they are still in production as the International Durastar.
HO GMD SD40-2W - DC/DCC Ready - CN (Non Dynamic Sergeant Stripes) #5361
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low profile? Barber S-2-A with Timken rotating caps
Wheels: CNC-Machined 36in Wheels
Detroit Toledo & Ironton (DTI) Delivery 1970 Magenta shows off one of the most-requested paint schemes for the Tangent Greenville 86ft Box Car System. We appreciate the patience of DT&I modelers, as we wanted to get this car right with the correct 1970 Greenville body with accurate DT&I Magenta paint and lettering. This Magenta DT&I group totaled 54 cars ? It was also the first group to be delivered for use in the new Ford Brownstown Parts Distribution facility pool. Yes, these cars were pooled, so that means these beautiful Magenta 86ft giants served Ford US Parts Depots coast to coast in the Ford BRO pool lanes. Note the prototype photo on our website that shows a DT&I BRO car behind a GN painted, BN-restenciled SD45 presumably photographed on BN headed to Seattle. The DT&I cars feature the distinctive Brownstown body style, with extra vertical rivet rows at the ends of the side sheets. An accurate End-Of-Car Cushioning underframe shows off the 100-Ton Low profile Barber S-2-A trucks, 36in wheels and Timken rotating caps. Ortner 5-Bay Rapid Discharge Hopper - OMAX (5-pack)
MODEL FEATURES:
-Removable load
-Decorated models fully-assembled and ready to run out of the box
-Highly-detailed, injection-molded body
-Separately applied wire grab irons on side ladders
-Separately applied brake wheel
-Body mounted McHenry operating scale knuckle couplers
-Minimum radius: 18inch
-All 5 packs come with unique road numbers
-Machined metal wheels with RP25 contours operate on all popular brands of track
-IPSX, OMAX, and SMEX are coal service cars. CBNS, HLMX, and ITGX are sugar beet service cars
-Sugar beet service cars will include newly-developed etched upper extensions included in poly bag
PROTOTYPE AND BACKGROUND INFORMATION:
The unit train concept was pioneered by Ortner Freight Car Co. in 1960 as an effort to streamline bulk cargo unloading. Robert Ortner, developer of the rapid-discharge door system, targeted unloading a train of rapid discharge cars in 30 minutes to an hour. Previously this same task would take four hours or longer. Unit trains shuttle back and forth between mines and power plants eliminating dwell time in yards. The concept has become ubiquitous to the modern railroading scene. In more recent years many of these cars have been converted to sugar beet hauling service and had capacity extensions installed.
HO RTR 40Ft Steel Side Boxcar - Delaware Lackawanna & Western (Blue Coal) #51502
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. HO Silver Springs Bus Terminal - Kit
The Cornerstone Series Silver Springs Terminal is based on the streamlined structures that were built across the continent beginning in the late 30s. The clean lines of streamlined designs were applied to everything from light switch plates to vacuum cleaners; all evoked the look of speedy streamlined trains. With its curved windows and corrugated canopies, this transit terminal perfectly captures the look of the era. Bus stations similar to Silver Springs Terminal are still found in many cities, so this model will be a welcome addition to any transition- or diesel- era layout!
- Perfect for your layouts 1930s and later
- Classic streamline modern design
- Includes boarding canopy
- Realistic signs
- Fits steam or diesel eras
- Easy-to-build plastic kit
- Molded in appropriate base colors plus clear glazing
The finished structure measures: 11-1/4 x 8-3/4 x 3-1/2 inches (28.5 x 22.2 x 8.8cm)
HO Scenic Accent Figures - Young & Old (3 Pairs)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism. Racing Blue Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name. Thomas & Friends Thomas with Annie and Clarabel Ready To Run Electric Train Set - HO Scale. Thomas and his loyal coaches Annie and Clarabel are carrying a number of very important passengers, and you are invited in join in their travel fun! This HO scale electric train set is the perfect way to begin your Thomas and Friends collection. This ready-to-run train set includes: Thomas the Tank Engine with moving eyes, Annie coach with international style hook-and-loop couplers, Clarabel coach with international style hook-and-loop couplers, 36in circle of snap-fit E-Z Track? with 11 pieces of curved track and 1 curved plug-in terminal rerailer, power pack and speed controller, illustrated instruction manual.
Build your Thomas & Friends collection one friend at a time!
Features:
Complete Ready To Run Train Set
Powered by a Thomas the Tank Engine with Moving Eyes
Includes; Annie and Clarabel Coaches with International-Style Hook and Loop Couplers
36in Circle of Snap-Fit E-Z Track, Power Pack and Speed Controller
illustrated instruction manual
HO Scale 1:87
Retail Package Measurements: L 19.5 in., W 3 in., H 18 in. 72Ft Centerbeam Flatcar with Standard Beam - Ready to Run - Southern #601070
Product Information
Shipping lumber by train is easy for your HO railroad with a fleet of WaltherMainline 72Ft Centerbeam Flatcars on the job! Designed to speed loading and unloading, these bigger cars entered service in the 1980s and quickly became a favorite with shippers and customers. These nicely detailed models are based on earlier cars built with oval cut-outs (popularly known as -opera windows-) on the centerbeam to reduce overall weight, which are still in service with a wide range of railroads and lumber producers. Other features include:
Limited edition - one time run of these roadnumbers!
Heavy die-cast metal underframe for excellent tracking
Correct 36In turned metal wheelsets
Proto MA metal knuckle couplers N Scale 52Ft Mill Gondola - CEFX (3pkg)
Detailed Information
MODEL FEATURES:
Body-mounted McHenry knuckle couplers installed
Fully assembled and ready for your layout
Screw mounted trucks for accurate tracking
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust Testors - Spray Enamel - Metallic Gold
Testors 3 oz Aerosols come in over 50 popular colors and 9 different finishes. They offer superior adhesion to a variety of surfaces including wood, metal, glass, terra cotta, ceramic bisque and more. They are fast drying and easy-to-apply which means quick project completion. HO Union X-3 Tankcar - UTLX (1930s Paint) (6 pkg) #2
Detail Variations:
Equipped with KC brakes
6-pack includes the following numbers, all individually packaged:
#32007
#32179
#34824
#33873
#33917
#35881
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme. Decoder Buddy Mini 2.2K Axial
The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications. There has also been interest in HOn3 and S-Gauge applications.
N Scale 40Ft Refrigerated Container - ONE Set #1 (3 pkg)
Road Numbers: SZLU 9564004, 9544707, 9556478
MASTER MODEL FEATURES:
Features:
Prototypically accurate Daikin reefers
40-foot High-Cube Refrigerated Container
Composite materials sandwich-sides design
Detailed picture window refrigeration unit with separate parts
ISO Type 45R1
Five hinge / four bar doors with OUT style handles
Each set comes as a 3-pack Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- SP -B-70-54 Delivery 2-1970
Product: Greenville 86′ Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Southern Pacific: This B-70-54 group covers SPs first order of quad door cars that were part of the GM Stamping Pool out of Cleveland, Ohio on the B&O. The scheme, of course, is simply one of the coolest paint jobs ever applied to a Greenville 86ft boxcar. Hold this car in your hand to appreciate the nuanced differences between white stenciling and SP Lettering Gray stenciling. From the huge dark gray arrows pointing to the centered SP logo, to the smallest black door handle detail, it?s all there. The SP cars feature their as-built 1970 appearance that includes Apex crossover platforms, a Universal hand brake housing (with separate long handle!) and a Universal brake wheel. SP ordered their cars with Center-Of-Car cushioning, and we have duplicated this setup, with a complete COCC underframe and draft gear. 70-Ton Trucks with 33in wheels and rotating Timken roller bearing caps finish off this replica. These SP replicas are Ready-To-Operate in eight numbers! Ballast Bag - Fine Light Gray (21.6 in3)
Realistically model railroad track, crushed rock, and stones.
Easy to use and colorfast. HO - Siemens ACS-64 - DCC & Sound - Amtrak/Demonstrator (Flag)
Features:
DCC sound-equipped ACS-64 includes a TCS WOWSound CD-Quality 16-bit 44,100Hz decoder with Audio Assist
Sounds package includes: horn, bell, cooling fan/power inverter, pantograph extension and retraction, coupler close/release, brake release and application, momentum, crew alert, grade crossing quill, departing and arriving station announcements, and more
Keep-Alive device for uninterrupted operation, even over dirty track and remappable light functions, die-cast frame, and selector switch for choice between rail and pantograph operation.
Performs best on 22inch radius curves or greater
HO Scale 1:87
Product Measurements: L 9.5 in., W 1.5 in., H 2 in.
Retail Package Measurements: L 12.5 in., W 2 in., H 3.5 in. F30A 50Ft Flat Car: PRR 1960s Era #475003
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
Delaware & Hudson #9063 (black, yellow, Spelled-Out Road name)
Ready to Run
Crisp details and sharp painting and printing
Metal wheels
Knuckle couplers HO Bi-Level Auto Rack - CSX/TTGX Flat Car #993086
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
Evergreen Scale Models 2100 .100in Opaque White Polystrene V Groove Siding (1 Sheet)
.020in (.50mm)THICK X .100in ( 2.5mm) GROOVE SPACING X .018in (.45mm) GROOVE WIDTH. GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
AVAILABLE IN 6inch X 12inch AND 12inch X 24inch SHEET SIZES HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian Pacific #304666
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers Acrylic Paint - B&M Blue (1oz)
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). HO ALCo RS-3, Phase 3 - DCC/Sound - Boston & Maine #1512
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- fuel tank
- can motor
- flywheels
- blackened wheels with RP25 flanges and knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound V5 decoder HO RTR 55 F-100 Panel Truck - Reliable Plumbing
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Clear window glazing
- Rubber tires 87032 Masking Tape - 18mm Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.06 (10pcs pkg) HO High Speed Limit Signs (16pk) HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14087
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate HO 40Ft Wood Reefer - UTRX #11633
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch HO GMD SD40-2W - DC/DCC Ready - CN (Non Dynamic Sergeant Stripes) #5360
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights HO SD70 - DCC Ready - Norfolk Southern #2567
NS FEATURES:
Acquired by NS after 1998-1999 split of Conrail
Antennas and conduits on cab and long hood
Nathan K5LAR24 horn
Cab vent
Air Conditioner
Small front plow
-Dual- fuel sight glasses
Late fuel tank
Spare knuckle brackets on rear pilot
This group of former Conrail SD70s joined the NS fleet in 1998 because of the split up of Conrail between NS and CSX. Early repaints featured diagonal dashes along the frame.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?- Enamel Product.
This enamel wash is specially designed to bring out the details in gray warships typical of many nationalities from the Kriegsmarine, United States Navy, or Imperial Japanese Navy. Also it can be used in other subjects such as aircraft or gray tanks.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows.
The excess of the wash can be easily removed with a clean brush and White Spirit. HO Trenton Works 6348 CN Boxcar - Canadian National (w/ Conspicuity Stripes) #598145
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme HO Custom Brown Wood Barrels - Food/Flour (5pk)
Pre-painted brown and labeled. Assorted product labels in each set. HO G2.0 SD60M Tri-Clops - DCC & Sound - Ex-BN CIT Group (CBFX) #6028
Primed for Grime Locomotive
CBFX FEATURES:
Ex-BN, unique patches/paint per road number
Small EMD plow, faded paint effect
Front deck mounted ditch lights
Cab door with window
After BNSF sold off some of their aging fleet of SD60Ms, a small batch were purchased by CIT group as leased power. They can be found on many different railroads as extra power.
ROAD NUMBER SPECIFIC FEATURES:
#6025
Black reporting marks on cab
small CIT logo on body
faded BN logo on nose
yellow frame stripes.
#6028 `
White reporting marks on cab
large CIT logo on body
painted out BN nose logo
yellow frame stripes.
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately ?painted and ?printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Warranty service available
Minimum radius: 18inch Recommended radius 22inch
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
Animated roller bearing caps
SOUND-EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #00006
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate HO EMD FT A+B Set - DC/DCC/Sound - AT&SF (Freight Scheme) #100L + 100A
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate. Tru Color Paint 007 - Acrylic -Primer - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). HO 72Ft Centerbeam Flatcar w/Standard Beam - Duluth, Winnipeg & Pacific #626675
Product Information
Shipping lumber by train is easy for your HO railroad with a fleet of WaltherMainline 72Ft Centerbeam Flatcars on the job! Designed to speed loading and unloading, these bigger cars entered service in the 1980s and quickly became a favorite with shippers and customers. These nicely detailed models are based on earlier cars built with oval cut-outs (popularly known as -opera windows-) on the centerbeam to reduce overall weight, which are still in service with a wide range of railroads and lumber producers. Other features include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1980s to the present
Heavy die-cast metal underframe for excellent tracking
Correct 36inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Model loaded cars in minutes with SceneMaster Wrapped Lumber Loads (#949-3121-series, each sold separately)
HO Valley Growers Association Steel Grain Elevator - Kit
DIMENSIONS
Elevator: 4-3/8 x 6-1/2 x 11 inches (11 x 16 x 28.5cm)
Ramp: 5-1/2 x 2-1/2 x 1/2 inches (14 x 6.2 x 1.2cm)
Office: 2-3/4 x 1-1/2 x 1-1/2 inches (7 x.3.8 x 3.8cm)
Bin: 7-1/4 x 4-1/8 x 4-1/4 inches (19 x 10.5 x 10.5cm)
Rural grain elevators like the prototypes for the Walthers Cornerstone Valley Growers Association were somehow more than just a trackside industry. The elevator was, and in some place still is, the center of many rural communities. And in a few places it WAS the community. Handling grain from local farms and selling it to distant markets, many of these older buildings are still active today as stand-alone facilities or as part of larger grain and feed mill complexes that sprouted up around them. Steel elevators came into use in the 1920s as steel sheets became affordable. In fact, many wooden elevators were sheathed in steel for fire resistance. With its colorful signs and period styling, this corrugated-metal elevator is perfect for your layout and your favorite era from the 1920s to today. The kit includes the main elevator, plus a wood storage bin and wooden office, all with realistic wall textures. Separate doors and windows add to the realism, along with colorful decals for several grain companies. If your steam or diesel-era railroad hauls grain then you need the Valley Growers Association grain elevator along your line.
- Realistic corrugated-metal construction
- Includes elevator, office and trackside storage bin
- Use with other Walthers Cornerstone grain handling structures
- Easy-to-build plastic kit
- Molded in appropriate colors
HO 1975 Buick Estate Wagon - Dark Green
This wagon is perfect for North American street and highway scenes. This detailed station wagon features a die cast metal body, interior seats, window glazing and authentic decoration. Perfect for a family vacation or carting groceries around town, this station wagon sis a great addition to any 1970s and later layout scene. Late - Conrail Grey Quality Logo #888886 ATOM DCC Block Detector
The Iowa Scaled Engineering ATOM is a reliable, easy-to-install, single-channel DCC block detector. Compatible with a wide variety of other block detectors on the market, the ATOM provides two open collector outputs (one for detection, one for no detection) with optional pull-up resistors and easy pushbutton sensitivity adjustment. Since it is based on a current transformer, the detector maintains isolation between your track and signal systems.
This version has screw terminals for the power and output connections. For our friends invested in C/MRI, we offer an alternate version of the ATOM (part number CKT-BD1-CMRI) with a plug that connects directly into the C/MRI detector motherboard and provides a drop-in replacement for the DCCOD.
FEATURES:
- Isolated, current-transformer based detection for DCC
- Highly sensitive (~1mA, equivalent to a 10k ohms)
- Simple single button sensitivity adjustment
- Two opposite polarity, open-collector outputs (40V / 250mA capable)
- Optional built-in 10k output pull-up resistors
- Powered from 5V to 24V
Typical Applications:
- Detect block occupancy for signal systems
- Activate grade crossing signals
- Trigger sounds
- C/MRI track occupancy inputs
Specifications:
2.0(L) x 1.5(W) x 0.875(H) inches N Scale Union Station - Kit
Details:
American Prototype
Ornate front entrance with realistic cut-stone wall detail
Fits steam or diesel-era layouts from the 1900s and beyond
Realistic decals
realistic columns, canopies and non-working clock detail
Easy-to-build plastic kit
Molded in appropriate colors
Product Information
For generations of travelers, Union Station was the magical gateway to and from the world. The Walthers Cornerstone Union Station will be the gateway to your layout! Here is where the journeys of the finest trains on the line started and ended. Where travelers rushed to make their connections. And thousands of commuters began and ended their workday. Where space was limited in larger towns and cities, two or more railroads would often combine their resources to build and operate major terminal stations. Monuments to the power and success of railroading, they also projected the spirit of the community they served and the promise of excellent service for anyone who traveled by train.
Union Station is a fitting tribute to the grand terminals that served railroading for over 100 years. Whether your line runs heavyweights and steam, the flashy diesel streamliners of the 40s and 50s, or any of the colorful schemes and equipment of the Amtrak-era, Union Station is an ideal focal point for passenger operations. Designed to capture the look and feel of similar prototypes across America, it puts big detail in a small space without overwhelming your layout. If space is limited, it can be the focal point of operations for an entire layout. And best of all, this unique kit is based on an American prototype, so it looks right and fits perfectly without kitbashing. All the classic design elements are here, from the tall support columns to the nonworking clock on the roof. Each wall captures the look of cut-stone construction and is molded in color so painting is an option. Separate doors and windows, along with molded-in cut lines on the back of each wall simplify customizing. The large roof is neatly detailed with large skylights and numerous vents to make it more realistic. End-door canopies, realistic decals and many other details are also included.
As shown Union Station measures: 16 x 6 x 5-1/2inch (40 x 15 x 16.2cm) HO RTR SW1500 Switcher - DCC & Sound - Conrail #9619
ETA: January 2023
Detailed Information
SSW FEATURES:
SP-style lighting package with -head knocker- style Gyralight fixtures
P-3 horn
Flexicoil trucks
As-delivered configuration with footboard pilots, pilot face grab irons, early cut levers and corner frame gussets
1,100 gallon fuel tank
Full cab interior
In the first half of 1968 the Cotton Belt received their first SW1500s and they came with all the features of their SP counterparts of that era.
SW 1500 LOCOMOTIVE FEATURES:
Detailed cab interior
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Drop steps unless noted
MU stands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Exhaust stacks
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
Printed numberboards
Fine scale handrails
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc) SN2AB - N Scale Mainline Signaling Kit
N scale Mainline Signaling Kit including:
- 2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws.
- Makes all of your signals plug n play with small 10 pin connectors.
- Can be used as a basic N scale signal.
- Mounting board and hardware included.
- Current setting resistors are built in to the board.
- Easy mainline setup with A and B mast configurations.
- Pads are provided to make it easy to attach any signal to the mast base.
- This product is intended for use with the SE74.
The Digitrax Plug N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE74 signal driver cable.
This product is intended for use with the SE74 and other Digitrax signaling decoders. Spray Can - Coral Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint. Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- SP -B-70-54 Delivery 2-1970
Product: Greenville 86′ Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Southern Pacific: This B-70-54 group covers SPs first order of quad door cars that were part of the GM Stamping Pool out of Cleveland, Ohio on the B&O. The scheme, of course, is simply one of the coolest paint jobs ever applied to a Greenville 86ft boxcar. Hold this car in your hand to appreciate the nuanced differences between white stenciling and SP Lettering Gray stenciling. From the huge dark gray arrows pointing to the centered SP logo, to the smallest black door handle detail, it?s all there. The SP cars feature their as-built 1970 appearance that includes Apex crossover platforms, a Universal hand brake housing (with separate long handle!) and a Universal brake wheel. SP ordered their cars with Center-Of-Car cushioning, and we have duplicated this setup, with a complete COCC underframe and draft gear. 70-Ton Trucks with 33in wheels and rotating Timken roller bearing caps finish off this replica. These SP replicas are Ready-To-Operate in eight numbers! Acrylic Flat Colors - Desert Yellow - 3/4oz (23mL) Bottle
XF-59
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish. HO 89ft Thrall Bi-Level Auto Carrier - FEC/TTGX #156353
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation. Bi-Level Auto Racks - BNSF New Image - Orange Rack on TTGX Flat Car #TTGX 978188 N Scale Curved Track Section - 45-Degree, 8-1/2 inch Diameter (4pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go! HO 40Ft Hi-Cube Dry Containers - Maersk Line (Small Logo) (3pk)
3 pack road numbers include : MSKU 129707/130415/137673
Body: Type A
Door: Type C
Latch: Type C
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before. HO F45 - DCC/Sound - Wisconsin Central #6653
WC FEATURES:
- Purchased from Santa Fe in 1995; retired in 2001
- Operated in road service with each other and other WC power
- Details remained much the same as on Santa Fe
- WC F45s were equipped with ditch lights soon after repainting. Genesis F45 tooling does not accommodate ditch lights; however, we will include two ditch light housings and LEDS in the box for modelers to install if they wish.
ROAD NUMBER SPECIFIC FEATURES:
#6653
- Large and small Firecracker antennas
- RS3L horn
#6655
- Large and small Firecracker antennas
- P-3 horn on stand
#6656
- Small firecracker antenna
- and ATSF-style antenna stands
- RS3L horn
LOCOMOTIVE FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Coupler cut levers
- Flexible rubber MU hoses
- Flexible rubber trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Fine-scale Celcon handrails for scale appearance
- Windshield wipers
- Lift rings
- Wire grab irons
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Sander lines
- McHenry scale knuckle couplers - Kadee compatible
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED bulbs for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
- Flush mounted port hole window glass
- Flexicoil-C sideframes with high brake cylinders
- Minimum radius: 18 inches
- Recommended radius: 22 inches
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
HO 89Ft Bethlehem Flush-Deck Flatcar - Santa Fe #296640
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers HO 59Ft 4550 Cu. Ft. Cylindrical Covered Hopper - Trough Hatch - Santa Fe (ex-Koppel) #317649
National Steel Car Co. 59Ft, 4550 Cu. Ft. Cylindrical Covered Hopper - Trough Hatch
The car is commonly referred to as the -Canadian grain car-. Between 1972 and 1985 almost 20,000 cars were built for the Canadian government to assist the Canadian railways in transporting vast quantities of grain. Canadian National, Canadian Pacific, and other companies own or lease this type of car.
The trough hatch cars feature road name specific parallel ribbed roof hatches, diagonal ribbed -zig-zag- roof hatches, or smooth flat hatches as per the prototype. All cars feature numerous wire details, etched metal roof walks, laser sharp painting and lettering, accurate colors, 100 ton trucks with 36inch metal wheelsets, and metal knuckle couplers. HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) #484643
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme HO ACF 4600 3-Bay Centerflow Hopper - C&NW #180053
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #242
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
HO Assembled #148 Whisker Metal Couplers - Medium (9/32 inch) Centerset Shank (2pair)
The #148 Whisker Metal Coupler will work anywhere a NO.5 Coupler will work.
This industry leading coupler features an all metal coupler head, shank, and Whisker centering spring and comes complete with insulated draft gearbox and lid. The #148 Magne-Matic Whiske Metal Coupler may be mounted with the included #242 Snap-Together Gearbox or with other manufacturers cast-on coupler pockets.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #28 coupler.
Package Includes:
(2) Pair Assembled #148 Whisker Metal Couplers in #242 Gearboxes
(2) Extra #622 Knuckle Springs
#148 Whisker Metal Coupler Features:
Material - Metal
Shank Length - Medium (9/32inch) (center hole to back of coupler head)
Coupler Offset - Centerset
Knuckle Spring - #622
Centering System - Whisker
Head - Standard Head
#242 Snap-Together Gearbox Features:
Material - Insulated Plastic
Lid Type - Snap-Together
Dimensions - 7/16L x 5/16W x 1/8H inch
HO EMD GP40 - DCC & Sound - MKT (Green & Yellow) #216
1982+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO 53ft Jindo Container - EMP ex-FEC Set #2 (3pk)
(#968402, 968423, 968437) (BLUE/YELLOW)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting HO 13,600 Gallon Acid Tank Car - Union Tank Car/Black (UTLX) (3pkg)
ETA: July 2023
Road Numbers: 13848, 13877, 13880
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track N Code 70 Bridge Flex Track HO - 3D Stack Of Presents (4/Pkg) HO 40Ft PS-1 Boxcar - Port Huron & Detroit #1158
Date: BK 7-62
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch HO 1937 AAR 40Ft Boxcar - Round Corner Ends - New York Central (NYC Green) #157247
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme HO 1.5 Amp Premium Decoder w/Digitrax Easy Connect 9 Pin to DCC Medium Plug - 1.0 inch Harness
- .672 x 1.074 x .259 inch
- 17.08mm x 27.28mm x 6.6mm
- Digitrax Easy Connect 9 Pin Harness
- 1.5 Amp/2 Amp Peak Current Rating
- 6 FX3 Functions, 0.5 Amp Total Function Current Rating
▪ FX3 Function outputs for prototypical lighting effects and on/off control:
- Constant Brightness Lighting with directional or independent control.
- Realistic Effects like Ditch lights, Mars lights, strobes, and many more
- FX3 & Standard Function Qualifiers operate functions based on direction,
- F0 on or off, direction and F0, and whether loco is moving.
- FX3 effects optimized for selectable LED or lamp operation
- Configurable FX3 Pulse Function available on all function outputs.
- Function Remapping for custom function setup.
- Master Light Switch turns off all lights & functions with one keystroke.
- Advanced Consist Function Controls
▪ Digitrax LocoMotion® System-Your locomotives look like the real thing.
- The Digitrax LocoMotion System makes them run like the real thing, too!
- Torque Compensation for smooth as silk silent operation.
- 128 Speed Step operation (14 or 28 steps can also be used).
- Momentum with acceleration and deceleration.
- Normal Direction of Travel is user selectable.
- Switching Speed feature for easier and faster access to yard speeds.
- 3 Step Speed Tables set start, mid and max voltage for custom control.
- 28 Step Speed Tables with 256 level resolution for precise control.
▪ Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.
▪ Series 6 Decoder Features.
▪ 2 Digit and 4 Digit Addressing.
▪ Basic, Advanced & Universal Consisting.
▪ SuperSonic motor drive for silent operation.
▪ Scaleable Speed Stabilization ( Back EMF) for smooth operations.
▪ Direct mode programming.
▪ Decoder Reset CV with or without speed table reset.
▪ Transponder Equipped ready for transponding on your Layout.
▪ Motor Isolation Protection helps prevent damage to your decoder.
▪ DCC Compatible.
▪ FCC Part 15, Class B RFI compliant.
HO EMD GP7 - DCC & Sound - Maine Central MEC #563
Detailed Information
MEC FEATURES:
Winterization hatch
Full sill skirts
Nose-mounted bell
Tall MU stands
Maine Central continued the process of dieselization of their freight operations in Fall 1950 and 1953 with the purchase of 9 EMD GP7 locomotives equipped with dynamic brakes. We are offering these units in MECs -simplified- green paint scheme for the first time in our Genesis product line.
ROAD NUMBER SPECIFIC FEATURES:
#563
Unique MEC logo on front and rear ? New color formulation of gold color based on input from MEC modelers
#564
-Simplified- green paint scheme
#566
-Simplified- green paint scheme
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control Brown 1/16inch 1.5mm Fibers, 3-1/2oz 100g
Model more realistic grass in minutes in any scale
Great for lawns, farm fields, railroad and highway right-of-way and more
Six realistic colors - made exclusively for Walthers by Noch
Easily applied with Noch Static Grass Applicators, Grass Dispenser Bottle or Gras-Master 2.0 (each sold separately)
3-1/2 Ounce 100g reclosable plastic bags HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4573
5inch stripe w/water expansion tank, no ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127420
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs HO ET44 Tier 4 - DCC & Sound - CN Heritage/Illinois Central #3008
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units. Tru Color Paint - Acrylic - Burlington Red - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). Pan Head Screws 1/72 x 1/8inch
Steel Pan Head Slotted Machine Screw 1-72 x 1/8inch, 10 pcs
Screws are fully threaded. Length is measured from under the head.
HO Modern Sectional House with Garage - Kit
Product Information
Perfect for first-time HO home buyers or empty-nesters, the Modern Sectional House with Garage kit is a great addition to modern-era layouts! Featuring two complete structure kits designed for easy construction, the finished models are complete with:
Perfect HO home set with two complete structure kits
Typical of factory-built homes seen all across North America
Must-have for modern layouts
Use as stand-alone home or as part of an entire neighborhood
House includes two nonworking porch lights, electric and gas meters, high-efficiency furnace inlet and outlet pipes, front window shutters and two styles of doors
Garage can be built with one large or two small overhead doors
Detailed wall framing inside garage
Both structures molded in three matching colors
Measures: House - 6-7/8 x 3-5/16 x 2inch 17.5 x 8.4 x 5.2cm Garage - 3-1/8 x 3-1/8 x 2inch 7.9 x 7.9 x 5cm (over eaves) HO Code 83 Ladder Track System Turnout - #5b Left Hand Curved Diverging Track
This unique system of five different #5 turnouts allows you to make more compact yards in a given space. The system includes curved diverging track turnouts, which allow a higher ladder track angle, several lapped turnouts and a standard #5 turnout.
Turnouts feature nickel silver rail, brown ties and cast-metal frogs. Forest Green
Models tree foliage for medium to large trees and low-to-medium ground covers, such as bushes, trees and shrubs. Use for any scale, colorfast and blends with other foliage.
Available in six realistic colors and great for making small trees too! Each package includes 32 oz volume of material. Underbrush works well for medium ground cover or undergrowth. It blends with our Foliage, Field Grass and Turf products.
1. Apply Scenic Glue (S190) to layout.
2. Press Underbrush into glue and allow to dry. HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15433
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate HO EMD F7A/F7A Set - DCC & Sound - Wabash #1169-A/#1189
Detailed Information
WAB FEATURES:
F7 Phase I
No dynamic brakes
Dual single-note air horns (A-units)
Passenger pilot
Cooling coils on roof
Wabash units 1158-1189 were delivered in 1951-52. In the 1960s, they were renumbered into the 600-726 series. Wabash 1189 has been preserved and is currently operational at a railroad museum in Illinois.
ROAD NUMBER SPECIFIC FEATURES:
#625
Nose MU connection
cut skirts
#631
Nose MU connection
cut skirts
#1169-A
Full Skirt
#1189
Full Skirt
F-UNIT SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Windshield wipers
Lift rings
Wire grab irons
Sanding lines
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Directional constant lighting
Headlight brightness remains constant
Separately-applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes & retention tanks
Speed recorder unless noted
See-through cab windows and full cab interior
Etched metal fan grilles
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Individual sound boards installed in both A and B units (sound units only)
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA-compatible in DCC mode
Excellent low-speed operation
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Lighting effects such as beacons, Gyralight where prototypically accurate
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box HO Gunderson Multi-Max Auto Rack - Canadian Pacific (Beaver) #697886
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering GLa 2-Bay Hopper: New York, Ontario & Western #1312
Detail Variations:
Single Car
As operated from 1933 to the 1953
Features:
All-new tooling
Scaled from original blueprints
Die cast frame and floor for optimum weight
Full interior rivet and bracing details
Factory installed wire grab irons
K- or AB-brake gear installed as appropriate
Factory installed Kadee #158 couplers in narrow draft gear box
Turned metal wheels in correct PRR 12D-F8 trucks
Accurate paint and lettering
Multiple road numbers available for each paint scheme and railroad
HO RTR PS 4740 Covered Hopper - CATX #5020
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Body-mounted McHenry operating scale knuckle couplers
36inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Multi-packs feature unique road numbers
Weighted for optimum performance
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch N Scale AutoScenes - Billy Browns Coupe
Billy Brown takes a spin in his pride and joy!
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:160 N scale models.
Figures included as shown. HO Enterprise 2-Bay Covered Hopper - GFCX #134
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Early CWSX #140047
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate EP-5 Electric Loco - DCC & Sound - Penn Central, Black #4975
Detail Variations:
With Vents
HO Model Features:
Accurately scaled from prototype blueprints
Period-correct detail options, including carbody, pantograph and hardware variations
Accurate paint and lettering
Several road numbers per paint scheme (where applicable)
Full cab interior
New Haven delivery and repaint schemes (repainted units have smaller NH logo on nose and re-positioned/larger nose road number)
Directional operating pantographs (sound models only)
DC/Silent or DC/DCC/Sound versions available
DC/DCC/Sound version features an ESU Loksound decoder with accurate -Jet- recordings
Complete lighting package including headlights, class lights, ground lights and cab interior lighting
Factory-installed MacDonald-Cartier metal couplers HO EMD SW9 - DC/ Silent - Generic Industrial Yellow - Unlettered
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor HO USRA Single-Sheathed Boxcar: D&H
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels HO Bathtub Coal Gondola - MWCX (ex-CP) #100429
Built: 3-06
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch 60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- TTX
Trailer Train 60ft Pullman-Standard bulkhead flatcar #92333
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0018
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21125
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO EMD SW1200 - DCC/Sound - Chicago & North Western #1211
- Flexicoil Trucks
The HO Scale Rapido SW1200 features:
- Designed from original blueprints and field measurements
- Heavy diecast frame, chassis and gearboxes for superior pulling power
- Rapidos renowned silky smooth-running drive system
- Working cab interior light and inspection lights
- Fully detailed Type A or Flexicoil trucks, as appropriate
- Full cab interior with working cab interior light and non-working fire extinguisher and fridge (where appropriate)
- Working headlights and illuminated number boards at both ends
- Some models have a rotary beacon or flasher/strobe as appropriate
- Separate handrails, including crash bars inside the cab
- Multiple exhaust stack and battery box door styles
- With or without working drop steps, as appropriate
- Incredible underbody piping and conduit detail - a Rapido hallmark!
- DC/Silent or DC/DCC/Sound versions featuring an ESU LokSound decoder with accurate recordings from a 567 prime mover
HO Scale Grumman LLV Delivery Truck Kit
This kit features a resin body, cast pewter frame and details, etched stainless steel doors and mirrors, water-slide decals, laser cut glazing and detailed instructions. The doors can be positioned opened or closed. To avoid any issues, the decals have been modified to be more generic as is pictured here. Detailed instructions can be viewed by visiting the Showcaseminiatures.net website Tru Color Paint - Acrylic - Clear Gloss - 2oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (Two-Tone Gray) #7023
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box HO GE Dash 9-44CW - DCC & Sound - Burlington Northern Santa Fe (BNSF Heritage I) #1044
BNSF FEATURES:
High-mounted number boards
K3 horn
Front ditch lights
ATSF -Gullwing- cab
Standard brass bell
Part of the first new BNSF locomotive order to be painted in the then new official corporate colors, these -Heritage- GE units became affectionately known by railfans as -Pumpkins- based upon the Great Northern colors used on some early diesels. Some are still running today in this scheme.
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box HO 50ft FMC Combo Door Boxcar - Railbox/ABOX #51963
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Weighted for optimum performance
- Minimum radius: 18 inches
- Body-mounted, McHenry operating scale knuckle couplers
- Fully assembled and ready for your layout
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust Edge Connector for Tortoise(TM) Switch Machine w/Green PC Board (2pk)
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include servo-based slow-motion Switch Machines, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
Designed to simplify converting your existing Tortoise(TM) Switch Machine, the Edge Connector features:
- Plug and play wiring for Tortoise(TM) Switch Machines manufactured before June 2020 with smaller, tan PC board (sold separately).
- Includes 6 inch motor connection cable with plug for direct connection to Stall Motor Controller 942-161 (sold separately).
HO 57ft Mechanical Reefer - Union Pacific/ARMN #756036
Move all kinds of perishable products on your HO railroad with Walthers Mainline 57ft Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s.
Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including:
-Limited edition - one time run of these roadnumbers
-Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
-Keystone or Hydra-Cushion underframe detail as appropriate
-Short ladders and low hand brakes
-9ft Youngstown plug door with separate latch bars
-Authentic Stanray peaked, ribbed roof with capped exhaust stack
-Detailed underbody with brake gear and fuel tanks
-70-ton roller bearing trucks
-Correct 33in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
Adjustable Stick-On Weights - 2oz HO EMD GP40 - DCC & Sound - Wisconsin Central #3011
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO GP7 - DCC & Sound - Bangor And Aroostook #63
BAR FEATURES:
- Winterization hatch
- Bell mounted on short hood
- Sloped pilots with footboards
- Large fuel tanks
- Square MU boxes with pipe bases and dual receptacles
BAR was an early supporter of EMDs road switcher concept, purchasing 12 GP7s in late 1949 and another 4 in 1952. Starting in the early 1960s, the units were repainted in a simplified solid blue scheme. The former BAR 73 was selected in 1975 to receive a colorful scheme of red, white, and blue to commemorate the nations Bicentennial. The unit carried the name Jeremiah OBrien, a Maine patriot, and a new number, 1776. The BAR GP7s were true travelers, being leased to the PRR starting in 1951 to assist with summer ore traffic, an agreement which lasted through the Penn Central era. They were also leased to the LV and LIRR to assist with power shortages on those roads.
LOCOMOTIVE FEATURES:
- Coupler cut levers
- Trainline and MU hoses
- Drop steps unless noted
- MU stands
- Nub style walkway tread
- Windshield wiper
- Lift rings
- Wire grab irons
- Windshield wipers
- Sander lines
- Bell placement & type per prototype
- Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
- Blomberg-B trucks with appropriate bearing caps
- Speed recorder unless noted
- See-through cab windows and full cab interior
- Fine-scale Celcon handrails for scale appearance
- Etched metal radiator intake grilles and fan grilles
- Air tanks mounted below sill unless noted
- Body-mounted McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18inch
SOUND EQUIPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes Conifer Tree Value Pack - Ready Made Trees
4 - 6inch 10 - 15cm Tall pkg(24)
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors. Great Lakes Ore Boat Kit - Unpainted and Resin Cast HO Curved Track - 22.5 Degrees - 16-7/8 Inch Radius (4pk)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes. Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation! Suitable for all types of layouts, whether temporary or permanent. This modular track system features an integrally molded roadbed for realistic appearance. Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections. HO GP38-2 - DCC Ready - Grand Trunk Western (GTW) #5856
Detailed Information
GTW FEATURES:
Ex-Rock Island
Mid/Late Phase
Large anticlimber
3600 gallon fuel tank
Xenon Strobe
M-3 Horn
Small EMD front plow
Blomberg B trucks
Firecracker antenna
88inch Nose with removed class lights
After the demise of the Rock Island in 1980 many of their locomotives were sold to other railroads. The GTW purchased some of these GP38-2s and painted them into this catchy red and blue scheme. Our models represent the pre-ditch light era.
ROAD NUMBER SPECIFIC FEATURES:
#5853
Large GT logo
Long hood mounted horn
White Xenon beacon (operational with DCC)
All-weather window
#5861
Large GT logo
Long hood mounted horn
White Xenon beacon (operational with DCC)
All-weather window
#5856
OLS with small GT logo
Cab mounted horn
White Xenon beacon (operational with DCC)
All-weather window
GP38-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO Dash 8-40CM - DCC & Sound - Canadian National: Website #2400
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height Kit
Includes 50 Feet of ladder, ladder brackets and level gauge UT6D - Duplex Radio Utility Throttle
FEATURES:
-Works with compatible LocoNet Systems
-Compact size for easy one-handed operation
-Color 1.5 inch LCD Display Screen
-Full numeric keys for easy locomotive selection
-Fine speed control with encoder knob
-Forward/Reverse toggle switch with braking
-On/Off Switch, uses AA or BP600MH batteries
-2 or 4 Digit Locomotive decoder access, provide over
-9,000 loco addresses
-29 Functions
-Digitrax Infrared operation with UR90/91/92
-Duplex wireless with UR93/92
-Duplex Scanner and Duplex settings editor
-Over 2000 turnout decoder addresses
-Locomotive Recall feature
-Convenient Throttle Option Setup
-Detachable LocoNet cable and Lanyard
-Replaces the UT4
HO Farm Combine w/Grain & Corn Heads - Kit
Product Information
Put this easy-to-build Walthers SceneMaster vehicle kit to work along your HO layout! Perfect for any farm scene, the detailed model includes complete instructions and features:
Designed for easy assembly - illustrated step-by-step instructions
Highly detailed to bring HO layouts to life
Build with your choice of corn or grain heads - both included
Use with SceneMaster Harvest Corn (949-1141) or Wheat Fields (949-1143, both sold separately)
Adaptable as load for flatcar or truck
Includes trailer for head transport
Positonable parts for added realism
Molded in two colors and clear plastic
Photo shows assembled model. HO 1980 Volvo N 10 Dump Truck - Assembled - Mint Green, Gray
This HO Scale 1980 Volvo N 10 Dump Truck by Brekina is based on the workhorse tipper-style dump truck used in North America and worldwide. This detailed model features an injection-molded plastic body with fine decoration, interior seats, window glazing and chrome-plated parts as appropriate. Athearn HO Scale - RTR 30,000 Gallon Ethanol Tank Car - CHSX - #255010
Detailed Information
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in HO Bathtub Coal Gondola - DREX (ex-Procor) #104061
Built: 5-05
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch HO Modern Water Tower - Kit
Product Information
The prototypes for the Walthers Cornerstone HO Scale Modern Water Tower are landmarks in small towns, big cities and at factories. In use since the 1960s, steel Water Towers like these are common sights today. In use, water towers like this maintain a constant pressure in the underground supply pipelines during periods of peak demand. Because theyre usually the first thing visitors see, most have the village or business name on the side. Some are also adorned with the state, town slogan or logo, and occasionally, a big happy face. This easy-to-build plastic kit features a body with realistic weld lines, plus a service door entrance and overflow pipe at the base. Decals for three different town names and more are also included. The Modern Water Tower is one of a wide variety of Cornerstone HO Scale industrial buildings.
A landmark in small towns and big cities
Great for 1960s and later layouts
Easy-to-build plastic kit
Authentic overflow pipe, access doorway and non-working top warning light
Includes city name decals
As shown the Modern Water Tower kit measures: 9-1/2inch (23.7cm) Tall x 3-1/8inch (7.8cm) Diameter HO SP 3/4 Dome-Lounge w/Flat Sides - Amtrak (Phase 1) #9372
-Overland Style
Rapidos SP Dome Lounge Cars Features:
Designed from original blueprints and field measurements of existing cars
Two fully-detailed interior configurations
Multi-colour interior decoration
Two underbody arrangements
Accurate interior and exterior paint and decoration
Full flicker-free track-powered interior lighting
Lighting (prototypically) in the dome roof
Accurate free-rolling trucks
Metal magnetic knuckle couplers .040in x .375in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
6in x 12in SHEET HO EMD SD10 - DCC & Sound - Milwaukee Road #546
Milwaukee Road
- SD10 model designation given by Milwaukee Road for their capital rebuild program of their old SD7s and SD9s
- A first in HO Scale plastic models
- Single fuel tank
Chopped short hood and modified cab
- Later style Horst air intake
- Rotary beacon
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more! HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Big Sky Blue) #5177
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme Output: 24V AC 1000mA
Powers up to 50 lights and connects to Just Plug Light Hub or Expansion Hub, each sold separately. HO Scale GP38 - DC/DCC Ready - Santa Fe (Yellow Warbonnet w/o Class Lights) #2346
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO Dash 9-44CW - DCC/Sound - UP #9696
UP FEATURES:
- Patched and renumbered former CNW units
- Patch, logo placement, and burn marks per prototype road #
- Nathan K3LA horn
- Primered replacement engine compartment doors
ROAD NUMBER SPECIFIC FEATURES:
#9675
- Primered replacement air conditioner
- replacement equipment door from a UP-painted loco, medium-height snowplow
#9696
- UP logos on sides of nose
- burn marks on engine compartment
- ghost outline of original CNW road number (8632)
- large snowplow
#9741
- UP logos on side equipment doors
- medium snowplow
- lasted in CNW paint until at least 2018
DASH 9-44CW SERIES LOCOMOTIVE FEATURES:
- Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
- Etched, see-through walkway steps
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - Conrail
#53870
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers. Dust Effects & White Spirit Enamel Paint Set -011, 015, 022
35ml X 3 jars per set HO PC&F 5241 CUFT - Boxcar - BKTY Patch 2 (UP) - Single Car #153475
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme HO 60ft Hi-Cube Plate F Boxcar - BNSF #761192
Bring your freight car fleet up to date in minutes with the Walthers Mainline(R) 60ft Hi-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft Hi-Cube Plate F Boxcar include:
-Limited edition - one time run of these roadnumbers
-Prototypes now in service with TTX and several railroads
-Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
-Prototypically correct roof with both X and diagonal panels
-Separately applied latch bars
-Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
-100-ton roller bearing trucks
-36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OAKX #62
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - CSX #242077
Product Information
Serve a wide range of HO industries with the 37ft 2980 Cubic-Foot Two-Bay Covered Hoppers from WalthersMainline. Based on prototypes introduced in the late 1980s, they can be found hauling cement, fracking sand, roofing granules and similar loads. Features of the layout-ready models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from late 1980s to the present
Separately molded and applied hopper gates
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately Kitty Korner
What downtown area would be complete without a gentleman s club? Kit includes full-color signs and complete painting and aging instructions. Guaranteed to be an attention getter!
Cast Hydrocal plaster walls, plastic door & windows and full color paper signs and awnings.
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
HO RTR 70 Ton 2 Ballast Hopper w/ Side Chutes - Conrail #53818
Blt. 6-53
Product Information
Perfect for work train service on our railroad, Bowser HO Scale ready-to-run 70-Ton 2-Bay Ballast Hoppers with Side Chutes (Ballast Gates) feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make these 70-Ton Ballast Hoppers welcome additions to any diesel-era freight train consist. HO Code 83 Ladder Track System Turnout - #5e Right Hand Last Ladder
This unique system of five different #5 turnouts allows you to make more compact yards in a given space. The system includes curved diverging track turnouts, which allow a higher ladder track angle, several lapped turnouts and a standard #5 turnout.
Turnouts feature nickel silver rail, brown ties and cast-metal frogs. HO Scale - GATC 2600 Airslide Hopper - GATX #47066
Detailed Information
MODEL FEATURES:
Genesis models include:
Cars include railroad and roadnumber specific detail
Models also feature Genesis details cut levers and train line hoses
Early GATC Airslide body: no angled end gusset plates; channel-section vertical posts at bolsters
Detailed underbody including outlet piping
Rectangular or oval shaker brackets
Gravity or gravity-pneumatic outlets
See through metal roof walk
Factory installed wire grab irons and brake piping
Separately applied round roof hatches and brake wheel
Bettendorf or Roller bearing trucks with animated spinning roller bearing caps
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Machined metal wheels
Weighted for trouble free operation
33inch machined metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch HO Cattails (60 pack)
Low spots and swampy areas are easy to model with the SceneMaster Cattails in HO! Perfect along railroads and highways, theyre a must-have detail by any stream, creek, pond or lake shore too. Designed for easy assembly and installation in new or existing scenes, the set includes 60 cattails molded in color. HO Bi-Level Auto Rack - Norfolk Southern/TTGX Flat Car #973881
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO 89ft Thrall Enclosed Tri-Level Auto Carrier - Norfolk Southern/ETTX Flat #33488/700392
Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these Walthers Proto models! Introduced in the mid-1970s especially to carry automobiles, the prototypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89ft flatcars with sidesill cut-outs and 28in wheels for added clearance. In service all across North America, the racks carry the owners logos, and most ride on flatcars leased from TTX with ETTX reporting marks.
A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
-Limited edition - one time run of these numbers!
-Prototypes in service from the 1970s to the present
-Factory-installed grab irons
-Separately molded and applied side ladders
-Ultra-smooth rolling metal axles with correct 28in wheels
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24in radius is recommended for operation.
HO 53ft Railgon Gondola - Railgon/GONX #310570
(as-built; black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Value Line RTR - 13 Panel Coalporter - Conrail #503061
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended. HO GE Dash 9-44CW - DCC & Sound - Canadian National CN #2522
CN FEATURES:
Canadian 4-window cab with high-mounted number boards
K3 horn
Front ditch lights
Front class lights
Rear single style headlight
Cab-mounted brass bell
Canadian National purchased 23 safety cab Dash 9 locomotives from GE in late 1994. Classed as -C44-9WL-, these locomotives were seen all over the system and featured a 4-window Canadian style cab, front and rear anticlimbers, and single rear headlight.
ROAD NUMBER SPECIFIC FEATURES:
#2506 Later appearance with right side yellow number board numbers and missing left side -American Continent- map art
#2510 As-delivered appearance
#2522 As-delivered appearance
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box Sequencing Light Hub
Bring your layout to life with a Sequencing Light Hub. Add up to four Just Plug lights that individually sequence on and off. Includes dimmer and speed controls. Turn sequencing off to use as a Light Hub. Add an optional Auxiliary Switch for convenient operation. HO 19,600 Gallon Tank Car - Tate & Lyle #51007
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Date: BLT 3-98 HO 40ft ACF Modernized Welded Boxcar - Penn Central #138166
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers Atlas - N Scale GP-9 TT - Gold DCC Sound - Toronto Hamilton & Buffalo #403
Features:
Powered low friction drive
Blackened metal wheels
Dual brass flywheels
Directional lighting
Golden-white LEDs
AccuMate couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
AccuMate couplers are made under license from AccuRail, Inc HO/N Flexible Herringbone Dark Red Brick Sheet (2-Pack) - Small
Product Information
The Chooch Enterprises Flexible Brick Wall Sheet is hand cast in super-detailed flexible vinyl. Easy to use, each pack comes with peel and stick permanent adhesive, which adheres to any flat, smooth surface. Thin material is easy to cut with a No. 11 blade or scissors. Brick sheets are painted in a base wash of color. Use the sheets right out of the package or paint with water-based acrylics. Each sheet measures 3-3/4 x 12inch 9.5 x 30.5cm. Three sizes of sheets are available with this texture: Small for N and HO Scales; Medium for HO Scale; and Large for HO, S and O Scales. Flexible Brick Wall Sheet 2-Packs are part of the extensive line of Chooch flexible walls and paving sheets.
EMD GP9 Phase II, High Short Hood - Standard DC - Soo Line #2412
(white, red, black)
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today.
Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21-pin DCC plug
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
Based on units in service from the 1960s to 1980s with:
Leslie S-2M and single chime air horns
Firecracker radio antenna
Working Pyle-National beacon
Short-hood forward operation
Pyle late dual sealed beam headlights
Super non-lifting type spark arrestors
Winterization hatch HO Windmill - Built & Ready Landmark Structures
Assembled - 3-5/8 x 1-3/4 inches 9.2 x 4.5cm Lichen - Dark Green Mix (173 in3)
This natural product is a longtime favorite of hobbyists. Its unique texture realistically blends easily with other foliages. It is non-toxic, non-flammable, and hygroscopic.
Use for any scale to model bushes, moss and other ground cover, or use as tree foliage to model quick and economical tree masses. Lichen is available in five solid colors and three mixes. Attach to Tree Armatures with Hob-e-Tac(R). Attach to layout with Scenic Glue(TM). HO GP9 - DCC & Sound - Great Northern #682
ETA: May 2023
Detailed Information
GN FEATURES:
Winterization hatch with horn mounted on top
Long hood-forward operation
-Nail- style antenna
GN style fuel tank skirts
In 1967, Great Northern introduced a new paint scheme, consisting of blue, white, and dark grey-green. Known as the Big Sky Blue scheme, it took its name from an unofficial nickname for the state of Montana. Several of GNs GP9 locos received the treatment as depicted here.
In 1970, GN was merged with the other Hill roads to form Burlington northern; however, the Big Sky Blue painted units survived for some time after with a simple BN patch.
ROAD NUMBER SPECIFIC FEATURES:
#682
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#683
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#688
Dynamic brakes
bell mounted on long hood
#690
Dynamic brakes
bell mounted on long hood
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20084
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Norfolk & Western Rack & Flatcar #412024
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers HO Rivoli Theatre - Kit
DIMENSIONS:
6-1/8 x 9-3/4 x 7-1/2 inches (15.3 x 24.3 x 18.7cm)
FEATURES:
- Perfect for your layouts Main Street
- Brick exterior with Art Deco facade
- Realistic colorful graphics for signboard, window displays and marquee
- Fits steam or diesel eras
- Easy-to-build plastic kit
- Molded in four colors plus clear glazing
Rustic Cabin
These preassembled, hand-painted and fully detailed structures are great for for detailing country scence in just a few minutes.
Woodland Scenics HO Scale Rustic Cabin is based on a getaway in the woods or a disheveled shanty on the wrong side of the tracks. This fully assembled building features old board and batten siding, a covered porch and shake shingle roof. Two rocking chairs on the porch provide a convenient location to watch a sunrise, and a milk can sits off to the side. Additional features include a pile of wood to prepare for cold nights, a wood stove pipe, a bent TV antenna, and an electric meter on the back of the cabin. The Rustic Cabin also has a Just Plug(TM) LED porch light for extra realism. Check out the entire line of Woodland Scenics HO Scale Built-&-Ready Landmark Houses.
HO Trinity 3-Bay Hopper - CAGX (3pk) #1
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust HO NSC Ballast Hopper - Canadian National (Maintenance Scheme) #302241
1976+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale Craft Plywood Sheet - 12 x 24inch x 1/2inch Thick - Single Piece
Perfect for painting, staining, stenciling and wood burning
Cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use
1/2inch (1.27cm) Thick x 12 x 24inch (30.4 x 60.9cm)
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov N Scale NSC 5277 50Ft Plug-Door Boxcar - Canadian National CNIS #413039
MASTER MODEL FEATURES:
Bodies: 5111 or 5277 cubic foot styles
Ends: Nine or ten corrugations
Painted safety rails
Doors: 9ft or 10ft plug doors
Side Sills: Deep or shallow sills
Trucks: 70- or 100-ton
Tangent Scale Models HOICC I-18 Steel Bay Window Caboose, Chessie System (B&O)
Product: ICC B&O I-18 Steel Bay Window Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Gould Caboose Roller Bearing with separate brake beam part
Wheels: CNC-Machined 33inch Wheels
DC/DCC Lighting Features: Interior lights (dim!), Scale-size Pyle lanterns
Baltimore & Ohio (B&O) Blue Simplified 1969+ represents a full B&O Blue repaint by the DuBois Shops in July of 1969. This simplified scheme example does not have the familiar -B&O- above the bay window. If you look closely, notice the B&O applied the modernized version of the Capitol Dome logo along with an ACI label. While the Chessie-era I-18s get so much attention with the various paint schemes, we like to shine a light on the subtle yet interesting blue repaints as well! Lighting features on this model include prototypically dim interior lights and lit Pyle lanterns. HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21173
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate HO CA-8 Early Caboose w/Lights w/DCC & Sound - Union Pacific #25578
ETA: August 2021
Detailed Information
Union Pacific CA-8 Caboose FEATURES:
Caboose trucks with swing arms, friction or animated roller bearing bearing caps as prototype appropriate
Various safety slogans, in both early banner style with green lettering and late vinyl decal with special graphics
Sliding cupola side windows
Cupola-mounted marker lights when appropriate
25576 is offered in an early CA-8 Pool service configuration HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23074
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate N Scale 50Ft Boxcar - GATX (BKTY) #151172
Built in 1977 by FMC for Hartford & Slocomb Railroad, these 50Ft boxcars with Barber Roller Bearing trucks were later operated by the New Orleans Public Belt. Eventually, Union Pacific received the cars and painted them in their boxcar red scheme, with ex-Missouri-Kansas-Texas -BKTY- reporting mark and GATX lettering. N Scale CV-1 Compact Oval Set
Complete oval with 8 pieces of 6 inch curves and 4 pieces of 124mm (4 7/8 inches) straight pieces.
Includes a rerailer and feeder track. HO AutoFlood III RD Coal Hopper - CEFX (6pk) #3
Includes the following numbers, all individually packaged:
#600600
#600612
#600626
#600644
#600568
#600673
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low profile? Barber S-2-A with Timken rotating caps
Wheels: CNC-Machined 36in Wheels
Detroit Toledo & Ironton (DTI) Delivery 1970 Magenta shows off one of the most-requested paint schemes for the Tangent Greenville 86ft Box Car System. We appreciate the patience of DT&I modelers, as we wanted to get this car right with the correct 1970 Greenville body with accurate DT&I Magenta paint and lettering. This Magenta DT&I group totaled 54 cars ? It was also the first group to be delivered for use in the new Ford Brownstown Parts Distribution facility pool. Yes, these cars were pooled, so that means these beautiful Magenta 86ft giants served Ford US Parts Depots coast to coast in the Ford BRO pool lanes. Note the prototype photo on our website that shows a DT&I BRO car behind a GN painted, BN-restenciled SD45 presumably photographed on BN headed to Seattle. The DT&I cars feature the distinctive Brownstown body style, with extra vertical rivet rows at the ends of the side sheets. An accurate End-Of-Car Cushioning underframe shows off the 100-Ton Low profile Barber S-2-A trucks, 36in wheels and Timken rotating caps. Perfect for moving bulk loads of all kinds that dont require protection from the weather, the WalthersMainline 34ft 100-Ton Two-Bay Hopper is a versatile addition to HO operations!
One time run of these road numbers, order now - limited quantity available!
In service from the 1970s to the present
Used to haul ballast, sand, gravel, ore and other bulk loads
Factory-applied door and brake details
Heavy die-cast metal underframe
Add a realistic load in minutes with the cast resin Chooch Gravel Load (214-7292) sold separately
Correct 36in RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers HO Waterslide Decals - Cargill 50ft Freight/Tank Cars - Corn Syrup HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1757
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
1/24 Scale - SCX24 RTR 2021 Ford Bronco 4WD Truck Brushed - Red
Axial reaches a new peak in 1/24 scale realism with this officially licensed Ford Bronco 4WD that tops the proven SCX24 platform with a highly detailed ABS hard body. Ideal for indoor or outdoor trails, its a must for Ford fans and RC enthusiasts of all ages!
- Factory-assembled and ready-to-run, with 3-channel radio, 030 brushed motor, servo, ESC/receiver unit and AA transmitter batteries included
- Officially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tire
- Bonus second decal sheet for optional customization
- Nitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheels
- Working lights in front, with molded lenses on all four corners of the body
In The Box:
(1) Axial SCX24 Ford Bronco 1/24 Scale 4WD RTR
(1) Horizon Hobby 2.4GHz 3-Channel Radio System
(1) Axial AS-1 Micro Servo
(1) Horizon Hobby ESC/Receiver Combo
(1) Dynamite USB LiPo Charger
(1) Dynamite 88T 030-Size Brushed Electric Motor With Pinion
(1) Dynamite 350mAh 2S 30C 7.4V LiPo Battery
(4) AA Batteries for Transmitter
(2) Decal Sheets
(1) Product Manual
Needed to Complete:
Nothing ? everything is included in the box! HO Steel Railroad Bridge Tower - Kit
Product Information
Walthers Cornerstone Steel Railroad Bridge Towers are just the thing for constructing impressive steel viaducts on your layout. This kit includes parts for a tower used for supporting deck girder bridges of varying lengths. Bridge Towers are easily cut to different heights.
Add realism to your HO railroad with the Cornerstone Engineered Bridge System!
Part of the Cornerstone Engineered Bridge System.
Common prototype design used with various types of bridges
Fits steam, diesel and modern-eras
Highly detailed parts
Easily cut to three different heights
Two sizes of concrete pedestals included
Use with Cornerstone Standard 30Ft, 50Ft and 70Ft Deck Girder Bridges (each sold separately) to model a continuous viaduct
Assembled model measures:
Length: 4-7/16inch (11.3cm)
Width at Base: 4-1/2inch (11.4cm)
Width at Top: 1-13/64inch (3cm)
Height: 10inch (25.4cm)
Footings Large: 29/32inch (2.5cm)
Tall Small: 1/2inch (1.5cm Tall)
Photo shows a typical viaduct modeled with Steel Railroad Bridge Tower Bent 2-Pack (#933-4555), 30Ft Standard Level Single-Track Railroad Deck Girder Bridge (#933-4505) and 70Ft Standard Level Single-Track Railroad Deck Girder Bridge (#933-4507), each sold separately HO Operating Ground Throw Kit - High Level Switch Stand .190inch Travel Sprung w/Lantern & Targets
Easy Manual Turnout Control Without Touching Your Rails
Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw. Molded on pin for direct mounting. All 100 series (Rigid) stands require modelers to fabricate a spring connecting link between the stand and the turnout. All 200 series units (Sprung) have internal springs so they can be connected directly to the turnout throwbar. Measurements indicate the maximum amount of side-to-side travel when the lever is thrown. For use with Atlas, Roco, Peco, Micro Engineering and Shinohara switches.
Use 947-1196 Brass Wood Screws pkg(24) #1; 3/8 x .070inch to mount turnout to table. HO Wrapped Lumber Load for 72ft Centerbeam Flatcar - Nascor
(black, blue)
Put your railroad to work moving these Walthers SceneMaster Wrapped Lumber Loads from sawmills to local building suppliers. Made especially for the HO Walthers Mainline 72ft Centerbeam Flatcars (#910-4800 series, each sold separately) and adaptable to most cars with a similar interior length, each is pre-painted and lettered in authentic schemes, and snaps easily onto the car to add realistic detail in a matter of minutes! 1940s - 1950s Gas Pumps - Unpainted - pkg(2)
Kit includes hose, nozzle, and pump pieces for two pump assemblies HO Stencil Railroad Roman - Alphabet & Numbers - Black - Waterslide Decals
Description: Stencil Railroad Roman - Alphabet & Number - Black HO Scale - 16, 12, 8, 6, 4 inches Bi-Level Auto Racks - BNSF Rack & Flat Car - Circle Logo #300309 HO MP15AC - DCC Ready - Lake State Railway #1501
Detailed Information
LSRC FEATURES:
MU hose holders on each end
Operating front and rear ditch lights
Air filter box, horn, decal placement, and antenna style per road number
Lake State Railway began operations in 1992. LSRC operates on former D&M lines in the lower peninsula region of Michigan. Commodities carried include aggregates, coal, and grain. In 2016, LSRC acquired two MP15AC locomotives from Union Pacific. 1501 is a former MKT unit, and 1502 was formerly owned by MILW.
LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Windshield wipers
Lift rings
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
NEW FEATURES:
Operating ditch lights (if equipped)
Operating ground lights
Newly designed motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers PRLX ex Warbonnet #238
Expected in November 2020
Locomotive features:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Sound equipped models also feature:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PRLX features:
All PRLX locomotives are Primed for Grime with road numberspecific patches and fading
Many of BNSFs SD75Ms were in storage by 2014-2015. The 20plus year old units were definately past their prime at this point, however, most of them still had a future. Norfolk Southern bought a total of seven units, to become NS 2800-2806. In addition, Progress Rail Leasing (PRLX) bought a large group of the units. They arrived to PRLX wearing several paint schemes, including the Santa Fe Warbonnet as well as BNSFs Heritage II paint. The units were hastily patched and placed into service, as of this writing they are leased to CN and KCS, but future leasing assignments are likely.
Primed for grime models feature:
Duplicated look and feel of -In Service- equipment, -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per roadnumber matching each corresponding side to the prototype
Perfect starting point for adding grime and rust Trim Film - Blue 4.5 in x 7.5 inch sheet - Waterslide Decal HO Industrial/Commercial Detail Set
(Unfinished Metal Casting) Built-&-Ready Landmark Structures - Old Windmill
Assembled - 3-3/8 x 2-3/16 inches
(8.57 x 5.55 cm) HO CA-8 Early Caboose w/Lights w/DCC & Sound - Union Pacific #25511
Detailed Information
Union Pacific CA-8 Caboose FEATURES:
Caboose trucks with swing arms, friction or animated roller bearing bearing caps as prototype appropriate
Various safety slogans, in both early banner style with green lettering and late vinyl decal with special graphics
Sliding cupola side windows
Cupola-mounted marker lights when appropriate
25576 is offered in an early CA-8 Pool service configuration HO 60ft Hi-Cube Plate F Boxcar - Trailer Train TBOX #661025
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers #1710 Roundhead Stainless Steel Screws 2-56 x 5/8 inch- 12pcs Spray Can - Pearl Green (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint. Drill Bit #74 - 0.0225inch Diameter (2 pkg)
Product Information
Walthers Drill Bits are the right tools for all kinds of hobby projects, from detailing locomotives and cars, to scratchbuilding, wiring and more. Theres a full range of common wire gauge - jewelers drill bit sizes from number 80 to 43, and each pack includes two ready-to-use bits. Walthers miniature hardware is a complete range of ready-to-use parts and tools for hobby projects, including wood, machine and nylon insulating screws, plus appropriate hex nuts and washers, in assorted standard sizes (machine and wood screws may be brass or brass plated). Drill Bits are part of the line of Walthers miniature hardware and tools. Bi-Level Auto Racks - BNSF Rack & Flat Car - Circle Logo #300292 MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present HO - 4750 Cubic Foot Rib-Sided - 3-Bay Covered Hopper - Illinois Central - #765858
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-Etched Metal Roofwalk
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch Athearn HO - 40ft Ribbed 3-bay Ballast Hopper - New York Central- #1 - 4pack
950089, 950140, 950239, 950363
Removable load
Separately applied wire grab irons and brake wheel
Solid nickel silver wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch HO 35Ft Fruehauf Integral-Post Volume Van - Boston & Maine #10264
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers. HO Laser-Cut 2-Lane Curved Wood Grade Crossing - 14-16in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights. HO RTR ACF 4650 3-Bay Hopper - Norfolk Southern #251122
Date: 8-92
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists. Spray Can - Olive Drab (100mL) TS-5
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint. Downtown Deco N Scale - Addams Avenue Part Three - Kit
2 5/8Inch X 2 3/4Inch
Add character to urban areas along your railroad with this series of structure kits. The models feature detailed walls made of cast Hydrocal, plastic windows and doors, along with full-color signs and awnings. Each can be assembled with basic hobby tools, and easy to understand step-by-step instructions walk you through construction, from gluing the kit together to final painting and weathering.
This typical skid row/downtown hotel includes the -Palace Hotel & Card Room-, -Reds Bar- and the -Downtown Apartments.-
Morgan Olson Route Star Van - USPS
Modernize HO highways in minutes with these new Morgan Olson(R) Route Star Van replicas! Based on the popular delivery vehicles seen from coast-to-cast, these layout-ready models include a wide range of details and colorful printed graphics. Check out these other great features:
Newly tooled officially licensed replica!
Contemporary delivery vans and food truck versions!
Five authentic body styles with correct rear doors
Prototypes seen all across North America serving small businesses & fleet operators
Fully assembled
Full-color graphics
Detailed driving compartment w/interior bulkhead
HO ACF PD3500 Flexi Flo Hopper -
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990
Car No. 897878
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers Spray Can - Brown JGSDF (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint. Chicago & North Western(TM) #11967 (yellow, green; Employee Owned Logo) - Ready to Run
Now you can add one of the most versatile machines every built to your maintenance-of-way fleet with the WalthersProto Jordan Spreader! Used to profile and grade drainage ditches during warmer weather, when the flakes start flying, Jordans can be found plowing snow and pushing it back from the tracks. These HO replicas are based on the model 2-200 Spreader-Ditcher-Snowplow used by dozens of railroads, which have been in service year round since the 1920s. Featuring all-new tooling, the models are a perfect companion to the WalthersProto Russell Snowplows (sold separately) and feature:
Limited edition - one-time run of these numbers
Factory-installed grab irons
Positionable wings and moldboards can be raised and lowered
Built tough with durable metal hinges and other details
Complete underbody with brake gear and piping
Thin profile stirrups
Cab window glass
Railroad-specific details
Horizontal or vertical air reservoir
Original or one of 3 later headlight styles as appropriate
70-ton roller bearing or Bettendorf trucks as appropriate
Single-chime air horn placement
Ultra-smooth rolling metal axles and 33in wheelsets
Proto MAX(TM) metal knuckle couplers
HO RTR 60Ft Flatcar - SOO Line #5531
MODEL FEATURES:
Working drop ends. Gently lift up & push inward to fold ends down.
Separately applied wire grab irons
Interior detailing
Decorated models fully-assembled and ready to run out of the box
Machined metal wheels and RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Minimum radius: 18inch HO EMD GP40 - DCC & Sound - Western Pacific (Zephyr) #3514
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO USRA Single-Sheathed Boxcar: RF&P
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels HO GMD SD40-2W - DCC & Sound - CNNA (Non Dynamic Map/ Oper. Strobe Lites) #5362
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights 2-Amp 12-Volt Filtered DC Power Supply - Walthers Layout Control System
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
See the entire system!
The Walthers Layout Control System 2-Amp 12V Filtered DC Power Supply features:
12V filtered DC power designed especially for Walthers Layout Control System
Powers up to 16 switch machines using Distribution Blocks (#942-111, sold separately)
Perfect for powering all types of layout accessories
Tangent Scale Models HO Greenville 86ft Boxcar CSX
CSX -Repaint 1991+ leads off this release, offering examples of repaints from B&Os first order of cars in 1969. Applying CSX paint to a Tangent replica is not a walk in the park ? It is all about the big AND little details. This car features the large CSX logo on the center of the sides and accurate Ease up! stickers on the corners. Apparently, the more the better, since CSX also applied tiny Ease up! stickers on each door. Yes, we have faithfully reproduced this extraordinarily small detail. Get out your magnifying glass if you want to read the CSX Quality Check oval sticker applied above the COTS by Grand Rapids employees. This Greenville car features Morton style crossover platforms, an Ajax hand brake housing, accurate End-of-Car Cushioning details with truck mounted brake hardware, and 70-Ton Barber S-2 Trucks with 33in wheels and accurate Timken roller bearing caps. Check out the CSX-specific modern features in this release, including the large tack board mounting location on the door and the single and double third arms on the top door tracks. We are now offering CSX in six different numbers!
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
1/8In Fluorescent Red Rod (7pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Red
HEIGHT IN INCHES
1/8In
HEIGHT IN MM
3.2mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16198
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Early Yellow) #475264
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons HO Storefront Signs - Industrial & Manufacturing
Blair Line HO Scale Business and Storefront signs are printed in appropriate colors on thin plastic for easy assembly or placement with plastic cement or CA glue. Colorful signs are based on real signs and many include two identical signs for back-to-back, two-sided mounting. Steam and diesel-era signs make great roadside, street-side, trackside and structure details. HO 45ft Trailer - Fredrickson #327
MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- Fully-assembled and ready to use out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration HO 26Ft Can-Car Dry-Van Trailer - CP Express #7538
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today! HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20016
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate 3/64 inch OD Round Brass Tube - 0.006inch Thick x 12inch Long (2 pkg)
Round Brass Tube 0.006inch Wall thickness x 12inch Long - package of 2
Outside Diameter: 3/64 inch FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1788
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO USRA Single-Sheathed Boxcar: N&W
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels Precision Oiler
The Zona Precision Oiler comes filled with general purpose, lightweight, plastic-compatible oil in a hypodermic dispenser. This oiler is ideal for precision lubricating in hard to reach places. Code 83 Rerailers (3/pkg)
Atlas code 83 line is fine quality, prototypical track for the modeler who is looking for track that is more exact-to-scale than code 100. Atlas code 83 track has fine brown ties and smaller nickel silver rail.
HO 85ft General American G85 Flatcar - GTTX (Brown) #300391
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches HO FMC 4700 Covered Hopper - NAHX (3pk)
MODEL FEATURES:
- Separately-applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, -brake cylinder and triple valve
- 100-ton trucks with 36 inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
- Factory applied roof walk, roof hatch, end details, ladders, and wire grab irons
- Two outlet grate variations
- Accurately painted and printed on a highly detailed, injection molded body
- See-through etched metal end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- All 3-packs feature unique road numbers
- Minimum radius: 18 inches HO EMD GP7 - DCC & Sound - Erie Lackawanna EL #1207
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
EL FEATURES:
Re-Lettered Erie units; post 1960
Dynamic or non-dynamic, depending on road number
Two single-chime horns
-Canvas- sunshades
Long-hood-forward operation
Curved spark arrestors
In 1960, the Delaware, Lackawanna and Western Railroad merged with the Erie Railroad to form Erie-Lackawanna. The Erie had owned a sizeable number of EMD GP7s, which were all less than 10 years old at the time of the merger and still giving good service. Rather than spend precious money to repaint these units immediately, the EL decided to retain the Erie paint scheme, but omitted the -wings- on the ends of the units and added their own logos. The units continued in this guise until the mid-to-late 1960s when most were repainted in the grey-and-maroon EL scheme.
ROAD NUMBER SPECIFIC FEATURES:
#1207 Dynamic brakes
#1214 Dynamic brakes
#1221 Non-dynamic brakes
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch HO 40ft ACF Modernized Welded Boxcar - Erie Lackawanna #88225
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers Track Conditioner with Pads - 1/2oz
Now you can not only clean your track but you can condition the rails for top-notch performance of all your motive power! This conditioner will clean your track while laying down a non-slippery conductive film that will improve current flow. Use to enhance the operation of DCC and sound systems as well as DC train operation, and eliminate erratic stops and starts, flickering lights, and poor conductivity. Use the included pads to apply the solution to the rails for uniform application.
(Will not harm plastic ties.) Tangent Scale Models Delivery 1969 - Gunderson 6089 50ft BoxCar D&RGW
Denver & Rio Grande (D&RGW) Delivery 1969 is an exciting release for us. The distinctive D&RGW Grande Gold orange paint coupled with black ends and carefully added roof overspray makes a model that is simply stunning. The prototype Rio Grande graphics were carefully fitted to the available 7 panels of space to the right of the doors. The white paint at the tops of the ends reminds you that this is a high-cube car. The Rio Grande cars feature truck mounted brake details, faithfully replicated with accurate truck-mounted brake beam details and no body-mounted brake cylinder on the Hydra-Cushion underframe. The Tangent D&RGW model also features accurate unpainted Morton style crossover platforms, early 5-board large tack boards on the sides and ends and an Ajax handbrake. Don?t forget to check out those accurate Hyatt rotating roller bearing caps on the 70-ton Birdsboro foundry Barber S-2 trucks!
Product: Gunderson 6089 50ft High Cube Boxcar
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Birdsboro foundry Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 33in Wheels HO FMC 4700 Covered Hopper - UNPX #121022
MODEL FEATURES:
- Separately-applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, -brake cylinder and triple valve
- 100-ton trucks with 36 inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
- Factory applied roof walk, roof hatch, end details, ladders, and wire grab irons
- Two outlet grate variations
- Accurately painted and printed on a highly detailed, injection molded body
- See-through etched metal end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- All 3-packs feature unique road numbers
- Minimum radius: 18 inches HO EMD F40PH - DCC/Sound - Amtrak (Phase II) #284
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
PSC Transfer Van - Canadian National #76555
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
8 Pin NEM652 with Speaker 11x15mm
Note: Please write in the customer notes if you want a sound file programmed and with the locomotive description and/or ESU Sound File Number.
The LokSound 5 Fx is a special feature of the LokSound family: it has no output and is specially designed for use in control cars or drive heads, which require a sound but do not have a model drive themselves. By omitting the engine part, it can still offer all the sound features of the other LokSound 5 members on a size of only 21.5mm x 15.5mm.
LokSound 5 Fx decoders are offered with an 8-pole interface according to NEM652 or a 21MTC cutting point and always come with an 11 x 15 mm sugar cube loudspeaker and sound capsule kit.
Modes
Like all family members, the LokSound 5 Fx is a true multi-protocol decoder. It masters the DCC data format as well as Motorola(R), Selectrix(R) and M4. In DCC format, 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses and up to 32 functions. With the help of RailComPlus(R) technology, the decoders register fully automatically at a suitable digital center.
It masters all DCC programming modes and can be both driven and programmed with compatible digital centers: Thanks to RailCom(R), it is possible to read out the CV values on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.
Motorola(R) users benefit from up to 28 driving steps at 255 addresses. Three additional Motorola(R) addresses enable the triggering of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.The M4 protocol allows automatic login to mfx(R)-compatible control panels.
The LokSound 5 Fx Decoder detects the Marklin(R) brake distances as well as ZIMO(R) HLU brake commands or the Lenz(R) ABC system. Also the brakes with DCC brake blocks or with DC voltages possible. It also stops with a Selectrix(R) brake diode. An ABC commuter train system allows automatic commuting between two stations.
The LokSound 5 decoder can be used on analog DC and AC webs.
The decoder switches on-the-fly fully automatically between operating modes. Most of the time, nothing needs to be adjusted.
Sound
The LokSound 5 Fx decoder can play up to 12 channels simultaneously. Each channel can be resolved with up to 16 bits / 31250 kHz and offers hi-fi quality on your system. There is virtually no difference to the original audible anymore. A Class-D audio output stage with up to 3W output controls the speakers, which may have between 4 ohms and 32 ohms impedance. A 128 Mbit sound memory provides enough capacity.
All individual noises can be adjusted individually in the volume. The super-flexible sound gine without a rigid schedule allows the exemplary simulation of all conceivable rail vehicles.
Functions
There are also some lights to turn on in the control car or drive head. Thats why we have equipped the LokSound 5 Fx with 6 reinforced function outputs. In the version with 21MTC interface, 6 outputs are added for controlling servos or logic level outputs. All important lighting functions are available. The brightness of each output can be set separately.
Motor
Although the LokSound 5 Fx itself does not have an engine output, it still simulates one. This is used for synchronization with the motor car, where ideally a full-fledged LokSound 5 decoder performs its service. In the train bandage, this ensures that the brake squeak takes place at the same time or that the lamps also switch the direction of travel at the same time.
Operational reliability
A PowerPack can be connected to the LokSound 5 micro DCC Direct Kato USA on request to bridge dirty rail section HO 73Ft Center Partition Car - Norfolk Southern #120391
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius HO 5820 Covered Hopper - Procor/UNPX (Union Carbide) #122026
Era: November 1977+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
Ballast - Coarse Gray Blend - Shaker (57.7 in3)
Use ballast and coal for any scale to model realistic railroad track, gravel roads, crushed rock and stones, hopper loads, and coal piles. Available in several colors and sizes, you can mix and match for a superior realistic effect. Ballast and coal are lightweight and easy to use. Watch the Woodland Scenics video about how to apply it and attach with scenic cement!
ALLERGY CAUTION: Ballast contains tree nut by-products. 6mm Static Grass - Spring Grass (20g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX (6 pkg) #6
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Includes Road Numbers:
21125
21173
21200
21268
21294
20299
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate HO NSC 60ft Ingot Flat Car - RTAX Liberty Railway Services
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
Code 83 Crossing - Nickel Silver w/Brown Ties - 60 Degrees
DCC Friendly HO 20K Gallon Acid Tank Car - GATX #29015
Era: 1991-2009, 2010-Present Day
MODEL FEATURES:
- Multiple road numbers
- Many separately-applied details
- Etched metal walkways
- Different top platforms as appropriate per prototype
- Different brake systems as appropriate per prototype
- Separate wire grabs and handrails
- Trucks with animated rotating bearing caps
- Minimum radius: 18 inches
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Body-mounted, McHenry scale double-shelf knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod
details
- Machined metal wheels with RP25 contours operate on all popular brands of track N Scale FM H-24-66 Phase 2 Trainmaster - Silver Standard DC - Canadian Pacific (Late) #8917
Features:
Ends with large number boards and a single headlight
Golden-white LEDs
Directional lighting
Painted safety rails
Etched metal grilles
Blackened metal wheels
Factory-installed AccuMate magnetic knuckle couplers
Atlas Master Series Silver Additional Features:
Atlas Silver Sound Ready models are equipped with a speaker for easy conversion to sound with the addition of a decoder.
AccuMate couplers are made under license from AccuRail, Inc N Scale Railroad Decal Set - Canadian Pacific Modern Boxcars 1970+ HO MIL 3800 Covered Hopper - CP (Delivery Scheme) #382676
They are back, again! The famous Rapido 3800 cu.ft. Cylindrical Hoppers make a triumphant ~THIRD~ return with new road numbers and paint schemes!
FEATURES INCLUDE:
- Round-hatch or Trough-hatch design
- Correct Dofasco S-2 100-ton trucks
- Two body variations with 6- or 11-side panels
- Three brake equipment variations and optional additional air reservoir on NSC cars (if applicable)
- Etched running boards and brake crossover platform
- Factory-installed air pipes and coupler cut levers
- Finely molded plastic walkway supports and end cages
- Full separate air piping and brake equipment details Vintage Motor Hotel with Office and Restaurant - Kit
If you hit the highways in the 1950s and 60s for business or fun, these classic roadside motels are forever a part of your memories and now they can be part of your HO layout with the Cornerstone Vintage Motor Hotel with Office and Restaurant Kit! A great value with three complete structure kits for one low price, other features include:
Two different styles of big roadside signs - decals for Westwind, Shadetree, Desert View and Green Valley Hotels
Printed paper curtains
Molded in six colors and clear plastic
Add more rooms with the matching Vintage Motor Hotel Kit (#933-3488, sold separately)
Office: 5 x 3-1/16 x 1-3/4in (12.7 x 7.7 x 4.4cm)
Hotel: 10-3/16 x 4 x 2-5/8in (25.8 x 10.1 x 6.6cm)
Restaurant: 6-3/4 x 5-5/8 x 3-1/4in (17.1 x 14.2 x 8.2cm)
Signs: Style #1 w/Base: 3-1/4 x 7/8 x 3-3/4in (8.2 x 2.2 x 9.5cm)
Style #2 w/Base: 3 x 7/8 x 3-5/8in (7.6 x 2.2 x 9.2cm)
HO 55Ft Evans 4780 Covered Hopper - Boston & Maine #5412
Product Information
Expand grain traffic along your HO railroad with a fleet of WalthersProto 55ft Evans 4780 Covered Hoppers! Introduced in 1977 and still going strong today, they can be found handling all types of grains and dried distillers grains used for animal feed. Fully assembled and ready for service, features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint and lettering
Ultra-smooth rolling 36inch RP-25 turned wheelsets
Proto MAX(TM) metal knuckle couplers 10Ft 6In Modified 1937 AAR Boxcar - Gulf, Mobile & Ohio #53015 HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21125
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate HO Glass-Fiber Style Cushion Coil-Car Hood - Kit (2pk)
Add a modern touch to your Walthers Proto or older Walthers 50ft Evans Coil Cars with this easy to build HO kit. Based on the later glass-fiber covers that replaced older steel styles, parts for two undecorated hoods are included. HO Value Line RTR - 13 Panel Coalporter - Conrail Quality #505321
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch Atlas Trainman HO
2 Bay Off set Hopper with Flat Ends Canadian Pacific #357017 Built-&-Ready Landmark Structures - Dugans Paint Store
Assembled - 4-19/32 x 3-5/8 x 4-1/2 inches
(11.6 x 9.2 x 11.4cm)
Color your city scenes with Dugans Paint Store. The fully assembled model is custom painted, expertly weathered and loaded with architectural detail. Accessories include full roof detail with ductwork, custom signage, colorful awnings, benches, a fire escape and more. Includes window treatments and dry transfer decals plus a first-floor printed interior and one warm white LED light, compatible with the Just Plug Lighting System. 25mA RoHS compliant. HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140007
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate HO 68Ft Railgon Gondola - Southern Pacific #365190
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers Light Green
Models tree foliage for medium to large trees and low-to-medium ground covers, such as bushes, trees and shrubs. Use for any scale, colorfast and blends with other foliage.
Available in six realistic colors and great for making small trees too! Each package includes 32 oz volume of material. Underbrush works well for medium ground cover or undergrowth. It blends with our Foliage, Field Grass and Turf products.
1. Apply Scenic Glue (S190) to layout.
2. Press Underbrush into glue and allow to dry. 12inch Long Round Aluminum Rod - 1/8 inch Diameter
Round Aluminum Rod - not hollow (1 pc)
Outside Diameter: 1/8 inch HO EMD SW9 - DCC & Sound - Boston & Maine (B&M As Delivered) #1224
Boston & Maine:
Delivered in 1952
-Trash can- style spark arrestors
Deck mounted side handrails
Hood mounted number boards (road number specific)
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor HO Parking Meters (20/pkg)
HO drivers may not like them, but these detailed Parking meters from SceneMaster are a great detail for your downtowns! Perfect for layouts from the 1950s to the present, the set includes 20 ready to install meters. Each one-piece meter is molded in gray and easily painted to match the prototypes. Use them with the SceneMaster Parking Lot (#949-1260) and Parking Lot Concrete Barriers (#949-4178), both sold separately, model a complete scene! G2 SD70M-2 - DCC & Sound - FEC #106
Genisis 2.0 Features:
See-through pilot steps, Lit Marker Lights (CN)
LIT numberboards & ground lights
Detailed Information
FEC NOTES:
Florida East Coast received a group of 4 SD70M-2s in 2008, painted in the RailAmerica scheme. The units were often found on mainline trains with GP40-2s, SD40-2s and the roads other SD70M-2s.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Etched see-through steps
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights HO Scale SD30C-ECO - DCC & Sound - Canadian Pacific #5038
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank. HO NSC 64 Ft 6000 Cubic Gondola HS - XRMX #2202
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate HO Vancouver Iron Works Piggyback Flatcar - Canadian National #688109
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15110
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO 1969 Dodge Charger Daytona
(Black, Red) HO 70-Ton 12-Panel Hopper - Pennsylvania (H39 Bethlehem Blt.) #667232
Blt.2-60
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers. HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian Pacific #304661
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers HO Code 100 Insulfrog Large Radius Turnout - Right Hand
If you wish to mix wheel standards on your 00/H0 layout, this is the trackage to choose. Code 100 rail allows flange depths up to 1.6mm which means that both vintage and current stock will run happily together.
The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make it easy to build convenient, complex and aesthetically pleasing formations using combinations of small, medium and large radius turnouts and crossings.
Technical Specification:
Length: 258mm
Frog Angle: 12 Degrees
Radius: 1524mm
USE:
SL10 Conducting Rail Joiners: Nickel Silver for PECO Code 100 track
SL11 Insulated Rail Joiners for PECO Code 100 track
SL14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork HO Modern 50Ft Highway Overpass - with Pier
The Rix Modern Highway Overpass for HO scales is modeled after the bridges built today to span over railroad tracks. This style of bridge is typical of most new construction and is used all over the country. The Rix Modern Highway Overpass consist of 50 foot spans which interlock together so that any length bridge can be built. The piers are designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy.
HO MP15DC Gold - DCC & Sound w/ Ditch Lights - LTEX #1502
Features:
Three different hood styles (angled air filter box, square air filter box, standard hood)
Exhaust stacks: with or without muffler
Long hood sand fill: recessed or extended
Rear sand fill: Three variations of sand boxes behind cab
Pilot: standard or with snow plow
Additional Features:
Separately-applied scale detail parts include: windshield wipers, metal grab irons, coupler cut levers, multiple-unit hoses, snow plow, train line hoses, fine scale handrails, and more!
See through step detail on sill
Etched metal radiator grilles
Painted crew members
Factory-equipped with AccuMate knuckle couplers
Coupler pocket designed to accept AccuMate Proto-couplers
Five-pole skewed armature motor w/ dual flywheels for optimum performance at all speeds
Directional lighting with golden-white LEDs
Atlas Master Series Gold Features:
ESU LokSound decoder, supporting all DCC programming modes.
Flexible mapping of function keys F0 to F31.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor and more. HO EMD SW7 - DCC & Sound - Conrail #8905
From coach and freight yards to primary power for shortlines, the WalthersMainline SW7 is a perfect choice for your HO layout! Delivering 1200-horsepower from an updated 567A prime mover, the prototypes proved popular with both railroads and industrial lines, with nearly 500 produced in just two years. Based on Phase II production units constructed from 1950 to 1951 with several still in service, each layout-ready model is packed with features including:
- One time run of these roadnumbers, order now - limited quantity available
- Used by dozens of railroads and industrial lines for switching, local and branch line service with several preserved today!
Based on Phase 2 prototypes built from 1950 to 1951 with:
- Wire grille radiator cover
- Dual tall conical exhaust stacks
- Large front radiator grille
- Single straight hood to cab transition
- 6 louvered side doors with letterboard gap
- Small square center cab windows
- Factory-installed grab irons on hood and cab
- With or without footboards as appropriate
- 4 styles of headlights to match prototype practice as appropriate:
- Original large single
- Retrofit horizontal dual
- Retrofit dual vertical
- Dual sealed beam
Available with ESU(R) Sound and DCC for DCC and DC layouts featuring:
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch 567A prime mover sounds
- Compressor
Same powerful drive as WalthersProto(R) locos featuring:
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Dual machined brass flywheels
- Heavy die cast metal chassis
- Constant and directional LED headlights
- Next18 DCC Plug
- RP-25 metal wheels
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
Alternate horns and bell sounds can be programmed on the sound decoder using these CVs:
Horns: CV163 = Leslie A-200
CV163 = Wabco Single Chime
CV163 = Nathan M3
CV163 = Leslie S3L
Bells: CV164 = Bronze Bell (default)
CV164 = Steel Bell
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present HO EMD GP7 - DCC & Sound - Maine Central MEC #564
Detailed Information
MEC FEATURES:
Winterization hatch
Full sill skirts
Nose-mounted bell
Tall MU stands
Maine Central continued the process of dieselization of their freight operations in Fall 1950 and 1953 with the purchase of 9 EMD GP7 locomotives equipped with dynamic brakes. We are offering these units in MECs -simplified- green paint scheme for the first time in our Genesis product line.
ROAD NUMBER SPECIFIC FEATURES:
#563
Unique MEC logo on front and rear ? New color formulation of gold color based on input from MEC modelers
#564
-Simplified- green paint scheme
#566
-Simplified- green paint scheme
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control SubTerrain System - Foam Risers (1/2in)
4/pkg - 1/2 x 2-1/2 x 24 inches (1.27 cm x 6.35 cm x 60.9 cm)
Risers are generally used with incline/decline starters to create varying grades on your layout. Risers are easily flexed to form curves and work on plywood or foam bases. To install, pin in place with foam nails and attach with foam tack glue or low temp foam glue gun and glue sticks. HO CA-8 Early Caboose w/Lights w/DCC & Sound - Union Pacific #25576
Detailed Information
Union Pacific CA-8 Caboose FEATURES:
Caboose trucks with swing arms, friction or animated roller bearing bearing caps as prototype appropriate
Various safety slogans, in both early banner style with green lettering and late vinyl decal with special graphics
Sliding cupola side windows
Cupola-mounted marker lights when appropriate
25576 is offered in an early CA-8 Pool service configuration HO Alco FA-1 & FB-1 Set - DCC Ready - Canadian Pacific (Block Scheme) #4026, 4415
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds HO GP40-2 - DCC Ready - ONT #2201
Detailed Information
ONT FEATURES:
Ex-B&M
Corrugated grilles
Non-dynamic hatch
Front and rear ditch lights
Side-mounted hood bell
M3 horn on long hood
Blomberg M trucks
Large fuel tank
Large front anticlimber
Small EMD front plow
Lit number boards and class lights if equipped (effect in DCC)
The Ontario Northland Railway is operated by the Ontario Northland Transportation Commission, part of the government of Ontario, Canada. Purchased in 2005, these ex-BM GP40-2s were repainted into this bright and vibrant scheme. A few kept their nose class lights after rebuild. The units have been seen operating in both freight and passenger service.
ROAD NUMBER SPECIFIC FEATURES:
#2200
Ex BM 311; class lights
#2201
Ex BM 300; removed class lights from nose
#2202
Ex BM 304; nose class lights only
GP40-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch 50ft Ext Post High Cube Plug Door Box - Wisconsin Central #1739
MODEL FEATURES:
Former MDC tooling
Brand new paint schemes
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Separate brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 18inch HO PC&F 5241 CUFT - Boxcar - BKTY Patch 1 (UP) - Single Car #153411
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme HO Scale GP38 - DC/DCC Ready - Southern (High Nose) #2754
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO 50ft PC&F, 8ft & 6ft Boxcar - SSW/GWS #27377
MODEL FEATURES:
- Separate wireform grab irons, etched metal coupler platforms, and/or etched metal roofwalk
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- Weighted for optimum performance
- Separately applied wire grab irons where applicable
- Trucks with animated rotating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Body-mounted, McHenry scale double-shelf knuckle couplers
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
- Minimum radius: 18 inches
- Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust HO Value Line RTR - 13 Panel Coalporter - NYC (Conrail Quality) #505804
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52R class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch Fir 4 - 6inch 10 - 15cm Tall pkg(13
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors. HO MI-JACK Translift(R) Intermodal Crane - Kit
DIMENSIONS:
7-3/8 x 3-3/4 inches (18.7 x 9.5cm)
This Walthers Cornerstone HO Scale MI-JACK Translift Intermodal Crane is based on the versatile crane that moves trailers and containers between trains and trucks or container chassis. Its wide enough to straddle the intermodal car and two rows of trailers or containers parked side by side, making short work of loading or unloading.
- Must-have detail for 1970s and later intermodal terminals
- Used worldwide
- Holds containers or trailers
- Adjustable parts to model a working crane
- Includes magnets to hold containers
- Colorful decals
RTR 52Ft Mill Gondola, TFM #60047
MODEL FEATURES:
Fully assembled and ready for your layout
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
33In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
Open top cars, such as gondolas, have been a mainstay on railroads for decades as they are ideal for carrying large, bulky loads such as coil steel or scrap metal loaded by crane. Bowser HO 50Ft 2 Door Boxcar Reading No 19206
Ready to run
Roller Bearing Trucks with 36in wheels
Knuckle couplers HO 66ft Bulkhead Flatcar - Undecorated National Steel Car
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.04 (10pcs pkg) HO 50ft Waffle HC Plug Door Boxcar - SCL #90947
MODEL FEATURES:
- Separate brake wheel
- Body-mounted McHenry operating scale knuckle couplers
- Machined wheels with RP25 contours
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches Gravel - Gray Fine
Gravel is sized to model gravel roads more realistically. Use Accent for shoulders and to model bare spots on roads.
Gravel- 10.8 in3
Accent Powder- 1.8 in3
Coverage: Models a gravel road 14 feet x 2 inches HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels PRR X31A Single-Door Boxcar: Plain Keystone - Single Car #70008
(1961-1968)
Detail Variations:
6-pack includes the following numbers:
#68377
#70008
#70094
#70178
#70274
#76625
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale HO H-6-D - DC/Silent - Canadian National Railway (Straight Wafer) #1330
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts. HO EMD GP9 Phase II - DCC & Sound - Undecorated
Loksound 5 sound
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today. Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21mtc connector
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
A great starting point for a custom-build, features of this model include:
Dynamic w/48inch fan and nondynamic long hoods
Single fuel filler on sill
Drop steps
Footboards
8 styles of MU stands and receptacles
MU hose clusters front and rear
Ratchet- and Peacock-style handbrakes
Steam generator and piping
Pyle (early and late) and Mars dual-sealed beam headlights
See-through 36inch and 48inch fans w/separate blades
Roof-mounted air tanks and piping (-torpedo tubes-)
Rounded and Square winterization hatches
Harco, C&O, Super lifting and non-lifting and N&W-style spark arrestors
Folded-style cab window deflectors
Canvas and metal sunshades
Two all-weather cab windows
Blomberg Type B sideframes w/separate swing hangers and brake cylinders
Roller bearing, sloped, square and plain bearings
Separate speed recorder and Automatic Train Stop (ATS) shoe
Two styles of fuel tanks; 1200/600-gallon fuel and water and 1600-gallon Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x12) .011In x .135In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 1 X 12 LUMBER SIZE IN HO SCALE HO EMD GP15T Diesel - DCC & Sound - CSX #1518
ETA: July 2023
Detailed Information
CSX FEATURES:
Unique art per road number
Ditch lights on both ends
Timken roller bearings
5-chiime horn
Expert approved artwork and colors
By the mid 1990s, CSX started to adapt yellow ends and frame stripes to some of their diesels to be more visible at grade crossings and help prevent collisions. This was a simple way of updating the paint scheme without a full repaint. Both the black frame (Blue Stripe) and blue frame (Blue Down) examples are represented in this run for some variety to your fleet. Each road number offered has different art details between them.
ROAD NUMBER SPECIFIC FEATURES:
#1504
-Blue stripe- repaint with yellow ends and frame stripe
C&O sub lettering
whip antenna
large front plow
unique number board font
#1513
-Blue stripe- repaint with yellow ends and frame stripe
CSXT sub lettering
whip antenna
large front plow
crooked CSX lettering on right side
#1518
-Blue down- repaint with yellow ends and frame stripe
CSXT sub lettering
whip antenna
Chessie front rock plow
GP15 SERIES LOCOMOTIVE FEATURES:
Operating Class Lights (DCC only)
Operating Number boards
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box 1940-49 REO Speedwagon - Unpainted and Resin Cast Kit 4A for G Scale, Screw Terminals, No Recorded Sound Files
For Scale: O & S The LokSound V5 XL decoder is intended for use in all applications where the required power exceeds the current limits of a LokSound 5 decoder. Ideally, these are 0 and S scale locomotives. Despite its compact dimensions of only 50.8 mm x 25.4 mm x 14 mm, the V5 XL is equipped with a dual speaker output and integrated PowerPack. The LokSound V5 XL Screw is equipped with multiple screw connectors. HO GE C30-7 - DCC & Sound - Burlington Northern (Early Scheme) #5526
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s. N Scale 52Ft Mill Gondola - C&O Railgon #351342
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch HO 60ft PS Flatcar - Burlington Northern #630844
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers HO UAC TurboTrain (DC/DCC/Sound): VIA #2 - 5 Car Set
#149-204-259-229-154
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model. HO GSC 41-HR Metal Passenger Trucks w/36in Metal Wheels
Used on many Pullman-built lightweight cars from 1941 to 1943. An easy upgrade for new and older HO Scale passenger cars, WalthersProto trucks are fully assembled and ready to use with built-in electrical contacts for car lighting and 36in turned metal RP-25 wheels. Chicago & North Western #39641
Built: BLT 2-69 RBLT 7-84
Metal wheel sets , Kadee #5 installed HO 50ft Ext-Post Hi-Cube Plug Boxcar - Columbia & Cowlitz #3037
MODEL FEATURES:
- Separately applied brake wheel and stirrups
- Highly-detailed, injection-molded body
- Metal wheels with RP25 contours operate on all popular brands of track
- Minimum radius: 18 inches Tru Color Paint 010 - Acrylic - Black - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding). Concrete Lamp Post - Just Plug(TM) package of 3
modern street lights HO 53ft Singamas Corrugated-Side Container - TMX Intermodal
(green, white, black, red)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes HO Greenville 86Ft Double Plug Door Box Car - CSXT (Boxcar Scheme 2019+) #180844
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
CSXT -Boxcar Scheme 2019+- throws a -modern era- repaint into this release mix. This Tangent model replicates the most modern incarnation of the CSXT scheme we have found yet applied to Greenville 86Ft boxcars, starting in 2019. For those keeping score, this is a former Chessie C&O 1978 car, with its 5-grab body style and body mounted brake hardware. The times, they are a-changin, and this car has an updated appearance for 2019-2020+ layouts. Notice the lack of a COTS panel on the paint job, vertical conspicuity striping, the correct placement of the large tackboard near the reporting marks, and the modification of the -third arm- layout on the left hand door. Those yellow-painted grab irons look classy! We even threw in the tiny one-inch 2020 Door inspection data patch, so we apologize to the 2019 guys for technically bumping the era forward one year. This car is ready to roll behind those CSX GEs. HO EMD Underframe Mount Bells (2pk) HO Steel Water Tank - Kit
Product Information
Add detail to your steam locomotive servicing facility with the Walthers Cornerstone HO Scale Steel Water Tank. A must-have for any steam-era layout, equipment like this could be found in terminals large and small. Water was vital to railroad operations in the days of steam. Thousands of gallons were needed to keep the engines hot and the railroad running. But as locos grew bigger, older tanks were often unable to meet demand. When plate steel became cheap enough to use as a building material in the 1920s, railroads began replacing decaying wooden towers with all-steel designs. These larger capacity tanks were usually erected away from the tracks, supplying water to thirsty locos via standpipes. This allowed the most versatility, as the standpipes could be erected where they were needed most. This was a common option for engine terminals and some smaller stations, where there was simply no room for the big tanks. Many of these steel tanks lasted beyond the days of steam and still supply water to shops or other company facilities. Perfect for serving your biggest and best steam power, this kit offers all the versatility of the prototype. It requires a small amount of layout space and comes with two standpipes which you can install wherever you want. Detailed parts are molded in color, while complete instructions make construction fast and fun. For the finishing touch, decal signs are provided. Use the Steel Water Tank in your layout scenes with other Cornerstone HO Scale railroad buildings.
North American prototype
Must-have for steam locomotive servicing scenes
Detailed tank supports
Two standpipes
Molded in appropriate colors
The finished Steel Water Tank model measures: 3-7/16 x 3-7/16 x 7inch (8.5 x 8.5 x 17.5cm) HO Code 83 Curved Snap Track - 18 Inch Radius (6/pkg)
Atlas HO Scale Code 83 Snap Track features brown ties and nickel-silver rail. Its perfect for modelers of all skill levels looking for high quality, prototypical-looking track with a near-scale rail height. Brown ties feature molded centerline nail holes for easy mounting with #2540 track nails. Fully compatible with all Code 83 Snap Track and conventional Code 83 track systems. Adapter track joiners #551 are available so you can also use Code 100 track on the same layout if desired. The track geometry of Code 83 track matches that of Code 100 Snap Track, so Code 83 track can be substituted for Code 100 in various Snap Track track plans. HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Erie #79008
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme HO H21A 4-Bay Hopper - K Brakes - Pennsylvania (PRR Red, Circle Keystone) #179378
1930+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Bowser SD40-2
There are no available products under this category.
 Special
|
Your cart
Customer Login
Manufacturers
- Accurail
- A-Line
- AK INTERACTIVE
- Athearn
- Atlas
- Aurora Miniatures
- Bachmann Trains
- Blair Line
- BLMA Models
- Bob Smith Industries Glue
- Bowser
- Broadway Limited Imports
- Busch
- Caboose Industries
- Circuitron
- Class One Models
- CMX Clean Machine
- Chooch
- DCC Specialties
- Deluxe Innovations
- Diecast Masters
- Digitrax
- Downtown Deco
- ESU
- Evergreen
- Excel Hobby
- Faller Gmbh
- Fox Valley
- Herpa Models
- Hi-Tech Details
- ITLA Scale Models
- Intermountain
- K&S Engineering
- Kadee
- Kalmbach Book
- Kato
- Kato Unitrack
- Juneco
- Labelle-Lubricants
- Microscale Decal
- Micro Engineering
- Midwest Cork
- Miniatronics Corp
- Morning Sun Book
- Monroe Models
- NCE
- New Rail Models
- NMRA
- Noch Scenery
- OVRTRAINS Private Label
- Panpastel
- Peco
- Pikestuff
- Plastruct
- Preiser Kg
- Rapido Trains
- Ribbonrail
- River Point Station
- Rix Products
- Smokebox Graphics Decals
- Soundtraxx
- Stoddarts ltd
- Sylvan Scale Models
- Tamiya
- Tangent
- Trucks N Stuff
- Vallejo Model Wash
- Walthers
- Woodland Scenics
- Micro Trains
Users online:
872
unregistered customer(s)
,
8
registered customer(s)
Copyright © 2003-2024 Otter Valley Railroad Model Trains - Tillsonburg, Ontario Canada