With Short Extended Couplers 1 Pair
with Short Extension Magne-Matic couplers - Assembled
For Con-Cor and Bachmann cars, rolling stock
This style, considered -modern era- came on the scene in the late -60s.
Micro-Trains trucks feature detailed sideframes molded in durable engineering plastic
60Ft PS-1 Boxcar - Grand Trunk Western - Blue #383371
Beginning in the 1960s, automakers approached rail carriers with the desire for larger freight cars to transport auto parts from suppliers to manufacturing centers. In response, the 60Ft auto parts boxcar was introduced. Carrying a wide variety of auto components including engine blocks, transmissions, brake drums, and others, these cars were a fixture throughout North America for the next four decades and can still be found in service today. Often times, entire trains of auto parts and related cars could be seen near major production facilities as automakers switched to just-in-time delivery methods, requiring prompt deliveries from the railroads providing service. It was common to see trains consisting of 50Ft, 60Ft, and 86Ft boxcars, specially modified flat cars to carry lightweight chassis, and autoracks all destined for one auto or truck manufacturing facility. As the auto industry supply chains evolved and manufacturing facilities were consolidated, many of the 60Ft boxcars were used in other markets and could be found hauling a variety of goods including appliances, paper goods, cardboard, and similar items.
HO 50Ft PS-1 Double Door Boxcar - Detroit & Toledo Shore Line #5207
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-Etched Metal Roofwalk or No Roofwalk Per Prototype
-33inch InterMountain Precision Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
Tru Color Paint - Flat Brushable Acrylic - CN Yellow - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
40Ft Steel Side Box Car (DF2 Dixie Line Blt 10-53) -Ready to Roll- L&N #46718
Evergreen Scale Models - Opaque White Polystyrene Square Tubing .312In x 14In (2 pcs pkg)
HO New Look Bus Santa Monica
Destination Sign:
3 Lincoln Blvd, Montana Avenue
Detail Variations:
Air Conditioner
Left-side Emergency Door
4-window exit door
Early-style engine door
Standee Windows
Roof-top Fleet Numbers
Intercity branding
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Conrail
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
HO 85ft ACF 48-Seat Diner - Lighted - Union Pacific (City of Denver) #5011
Union Pacific Heritage Fleet
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
Built as Lunch Counter Cafe Lounge in 1959 and originally numbered 5015, this car returned to special service as the Overland in 1988, named for UPs Overland Flyer and the later Overland Limited, which were both named for UPs Overland Route.
HO RTR 68Ft Railgon Gondola - BNSF #518507
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO - ACF 5250 CF Hopper - Glasshopper II (RNDX) #165
HO SD70M - DCC & Sound - Ontario Northland/ONT Flared #2120
Detailed Information
ONT FEATURES:
Ex-NS
EMD deck mounted front and rear ditch lights
PTC antenna array
Late 4-panel radiator body
Late sloped EMD cab nose
Small EMD front plow
Late EMD trucks with exposed bearings
The Ontario Northland Railway is operated by the Ontario Northland Transportation Commission, part of the government of Ontario, Canada. During late 2022, ONT purchased a small batch of ex-NS flared SD70Ms. As of recently, only 2 have been repainted so far. We are offering both as new additions to your model railroad!
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Scale G2 AC4400CW - DCC & Sound - CSX #1
CSX FEATURES:
Front ditch lights
Prime air dryer
Low number boards
Equipped with a CSX standard -tow-chain-
CSX purchased more AC4400CWs than any other railroad, spanning almost the entire production period. This includes three of the first six produced which have distinctive spotting features compared to all other units. A lightning bolt graphic was applied under the road number making these easy to identify as AC traction motors. Unique to CSX, all these units are equipped with hooks to carry a length of chain under the walkway.
ROAD NUMBER SPECIFIC FEATURES:
#1
Named Spirit of West Virginia
One of the original six AC4400CWs built
Re-trucked and renumbered from the originally delivered 9100 series
Holden K5H Horn
early body with central air intake forwards
unique angled grab irons on top of the nose
radiator grills on right side are evenly sized (a feature that didnt last with later models)
unevenly spaced rear grab irons
vertical handrail behind invertor cabinet
extended range dynamic brakes
early no-notch fuel tank
bolted on fuel tank
PTC antenna array
GE Steerable trucks.
#17
K5LAR24 horn
PTC antenna array
early body features
central air intake in forward position
early no-notch fuel tank
bolted on fuel tank
unevenly spaced rear grab irons
vertical handrail behind inverter cabinet
lipped Exhaust tub
extended dynamic brakes
GE Hi-Adhesion trucks
struts on all 4 corners of each truck
delivered with inside struts but modified to outside braced struts. This model represents the later modified version.
#420
K5LAR24 horn
late body features
central air intake moved rearward
late fuel tank with notch
fuel tank welded to frame
evenly spaced rear grab iron
handrail behind invertor cabinet jogged for capacitor box
two handrails above inverter cabinet
late antenna package
GE steerable trucks.
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO Amtrak NPCU Cabbage - DC/DCC/Sound - Amtrak (Phase III) #90222
The Rapido Trains HO scale Amtrak NPCU -Cabbage- features:
Fully powered, available in silent DC or DC/DCC/Sound
DC models are DCC-ready with a 21-pin plug
Accurate enlarged marker lights, supplementary air reservoirs and K5LA horn
Operating, flashing ditch lights
Operating strobe lights and marker lights
User-controlled operating number boards
Etched-metal radiator grilles and windshield wipers
Separate handrails and grab irons installed at the factory
Rapidos proven 5-pole, skew-wound motor and silky-smooth drive system
Metal, magnetic Macdonald-Cartier Couplers mounted at the correct height
Second release paint schemes include:
Amtrak Phase III
Amtrak Phase V
Amtrak Phase V -Downeaster-
Amtrak -Salutes Our Veterans-
HO Scale Dump Bed
This dump bed is from our Brigadier Dump Truck kit #3005.
HO Dash 8-40CM - DCC & Sound - BC Rail: Red/White/Blue #4607
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
N Scale Flexi Flo Hopper (Early) - New York Central (NYC As Delivered) - 6-pack
Road Numbers Include:
#885800
#885804
#885809
#885811
#885818
#885823
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO GE Dash 9-44CW - DCC & Sound - Burlington Northern Santa Fe (BNSF Heritage I) #999
BNSF FEATURES:
High-mounted number boards
K3 horn
Front ditch lights
ATSF -Gullwing- cab
Standard brass bell
Part of the first new BNSF locomotive order to be painted in the then new official corporate colors, these -Heritage- GE units became affectionately known by railfans as -Pumpkins- based upon the Great Northern colors used on some early diesels. Some are still running today in this scheme.
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
RS-18u, DCC Ready - Ontario Southland #181
Era:2006-Present
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Evergreen Scale Models Opaque White Polystyrene Strips 14in .250x.250 (3pcs pkg)
HO Waterslide Decals - Santa Fe Steam Locomotives - Silver Lettering
HO 54ft 23K Funnel-Flow Tank Car - Corn Products #1988
Add variety to your modern HO fleet with these WalthersProto replicas of the 54ft 23,000-Gallon Funnel-Flow Tank Car! Packed with details including the unique funnel-shaped body that speeds unloading on the prototypes, other features include:
- One time run of these roadnumbers, order now - limited quantity available!
- Introduced in the 1960s, still built and operated today
- Prototypes handle all types of petroleum and food products
- Etched metal walkways and platforms
- Factory-applied grab irons
- Brake train pipe and brake rigging underbody detail
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling metal axles and 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Value Line RTR - 13 Panel Coalporter - NYC (Conrail Quality) #505741
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52R class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO H21A 4-Bay Hopper - K Brakes - Pennsylvania (PRR Red, Circle Keystone) #176737
1930+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
PS-2 2003 2-Bay Covered Hopper - MILW #99708
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SECX #2308
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Evergreen Scale Models 9020 - .020in Plain Opaque White Polystyrene Sheet (3 Sheets)
6in x 12in SHEET
HO Value Line RTR - 13 Panel Coalporter - CSXT (Black) #385155
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
PSC Transfer Van - Canadian National #76553
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.08 (10pcs pkg)
HO 5820 Covered Hopper - DCLX (Dow Chemical) #7194
Era: 1988+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
#1710 Roundhead Stainless Steel Screws 2-56 x 5/8 inch- 12pcs
HO USRA Single-Sheathed Boxcar: C&O
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- Canadian Pacific
Trailer Train 60ft Pullman-Standard bulkhead flatcar #304670
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO RTR Thrall 5-Unit Rebuilt 40Ft Well Car - Trailer-Train DTTX #748106 A-E
(yellow, Small Red Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft on both single and five-unit cars. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers - limited quantiuty, order now!
100- and 70-ton roller bearing trucks
Correct 36inch and 33inch RP-25 turned metal wheelsets
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
Proto MAX(TM) metal knuckle couplers
HO RTR SD40-2 - DCC & T2 Sound - EMD Lease (EMDX) #6313
EMD FEATURES:
- Ex MILW
- Short fuel tank
- Leslie 3-chime horn
- Early radiator grilles
- 2 different plows (in poly bag)
- Fire cracker antenna
- Bell mounted behind the cab on the conductors side
Not only was EMD known for building locomotives, they also had a lease fleet of used ones. Power-short railroads could lease power on a short-term or long-term basis. Since the contracts would leave EMD to take care of maintenance, railroads could focus on other things. These brightly painted locos could be found on just about any railroad.
SD40-2 LOCOMOTIVE FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Coupler cut levers
- Flexible rubber MU hoses for durability
- Flexible rubber trainline hose
- See-through cab windows
- Fine-scale Celcon handrails for scale appearance
- Photo-etch stainless steel windshield wipers
- Wire grab irons
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Separately applied air tanks
- DCC-ready Non-sound version features 21-pin NEM DCC plug
- See-through dynamic brake and radiator fans
- Exhaust stack
- Frame mounted bell (unless noted)
- Detailed 4000 gallon fuel tank (unless different capacity is noted)
- McHenry scale knuckle couplers - Kadee compatible
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- Bi-directional LED lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
- Warranty service available
- Minimum radius: 18 inches
- Recommended radius: 22 inches
SOUND-EQUIPPED MODELS ALSO FEATURE
- Dual cube speakers
- Onboard DCC/Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127481
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #242
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
Brass Strip - 12inch x 1/4inch x .025inch
Length: 12inch
Width: 1/4inch
Thickness:0.025inch
HO New Look Bus Dallas Transit System (DTS)
Destination Sign:
73 Spring Green East
Detail Variations:
Air Conditioner
Left-side Emergency Door
4-window exit door
Early-style engine door
Standee Windows
C-27 ICC Caboose w/lights - B&O/Chessie System #C-3835
The ultimate detail with the best Genesis features.
International Car Co. began specializing in caboose production as early as 1941. When the railroads entered the 1960s, many needed to replace their aging, in some cases home shop built, cabooses. International Car responded with a product that could be tailored to each railroads specific needs. Using quality components and modern engineering, ICC became a leading name within the industry.
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
ICC CABOOSE FEATURES:
- Better than brass detail including roadname and road number specific detail Laser-Sharp Painting and Printing
- Interior seating for the addition of crew figures.
- See-through End Platforms and Steps
- Flush Window Glazing
- Wire-form Grab Irons
- Caboose trucks with animated rotating bearing or static friction bearing caps
- Axle Generator Details
- Body-Mounted McHenry® scale knuckle-spring Couplers
- Machined Metal RP25 Profile Wheel Sets
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Separate wireform grab irons, etched metal coupler platforms
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for trouble-free operation
- Window packaging for easy viewing, plus interior plastic blister safely holds the model for convenient storage
- Multiple road numbers
- Minimum radius: 18in
LED LIGHT EQUIPPED FEATURES:
- LED lighting for long life and reliable operation
- On-board DCC Decoder by NCE
- Operates in DCC and Analog (DC) with lighting Functions Controllable in DCC
- Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
- LED Interior Lights
- All functions NMRA compatible in DCC mode
SOUND EQUIPPED MODELS ALSO FEATURE:
- Soundtraxx Tsunami SoundCar decoder w/ included sounds:
- Air horn or conductors whistle as appropriate
- Clickety-clack with optional wheel flat spot sounds
- Brake set/release sounds including retainers and brake squeal
- Big Hole emergency brake application sound
- Handbrake tie-down/release
- Adjustable flange squeal
- Air, horn, and bell sounds work seamlessly with Soundtraxx locomotive sound decoders
- Supports Advanced Consisting in DCC
- Full DCC functions available when operated in DCC mode
- All functions NMRA compatible in DCC mode
B&O CHESSIE FEATURES:
- Brand NEW ICC B&O Style body
- Angled window screens
- Early style axle-driven generator
- Caboose trucks with roller bearing caps
- Ash pans
- Toilet Drain
- Illuminated marker lights, where appropriate
- Reflectors on end cages
- Overhanging, diagonal-panel roof with or without blank panel at smoke jack per prototype
- Overhanging, x-panel roof for the B&O Chessie caboose
Chessie #3835, #3887, #3915 features: First time ever C26A version. Dayco axle generator with notched undeframe.
Chessie C-3771 Gold Caboose - Unique safety slogan and Gold and Silver Paint
Budd Manor Sleeper - Seaboard, Cedartown
Each Baggage Dorm includes:
Realistic stainless steel finish
Track-powered interior lighting compatible with DC and DCC layouts
Full underbody detail including separate air, steam and electrical lines
Separate metal grab irons, stirrups and end gates
Accurate D22 brake equipment and piping
Super-detailed 41-NDO-11 trucks with end frames
Full, multi-color interior detail
3D CP beaver shields on CPR models - not just a printed picture!
Sprung diaphragms
Metal Macdonald-Cartier knuckle couplers
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - New York Central (NYC Green) #157092
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
NCE 160 N Scale N12-NEM 6 Pin Decoder
Plug in 4 function decoder with 6 pin NEM 651 Connector
Dimensions H 2.65 mm W 8.77 mm L including pins 19.41 mm
40ft NP 10000-series boxcar: Northern Pacific 1940 Small Monad Scheme #10287
HO Scale Thrall 53Ft Articulated Well Car Set - TTX (Forward Thinking Large) #728257 (3pkg)
Features:
Each car consists of three wells--A,B & C.
Walkway variants specific to prototype
Etched metal detailing
Detailed air reservoirs
Detailed brake valves
Sharp hand grabs and stirrups
Runs on 18inch radius
Recommended for 22inch radius
Floor pin holes for Atlas and other brands of containers
Product Information
When the domestic intermodal container market settled out in the late 90s, the 53Ft long container emerged the winner. Car builders responded with new wells of like size to accommodate the new standard. Introduced in series service in early 2000, Thralls triple 53Ft articulated well car was certainly the best looking of the 53Ft wells. Angular wheel cutouts, 3 flared-bottom wide and 8 narrow side posts give this intermodal age well car character.
HO 50ft FMC Combo Door Boxcar - MD&W #10004
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Weighted for optimum performance
- Minimum radius: 18 inches
- Body-mounted, McHenry operating scale knuckle couplers
- Fully assembled and ready for your layout
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Greenville 86Ft Quad Plug Door Box Car - BS-84 Claytor Repaint 1987+ - Southern (NS) #42409
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Southern (SOU) NS-era -BS-84 Claytor Repaint 1987+- is a very common 1980s paint job in the world of auto parts cars, this one for the Norfolk Southern (NS) system. After the NS merger, NS continued to paint cars in pre-NS schemes, this -Claytor scheme- repaint included. The Southern cars were built in February of 1970 as part of a lot that included the distinctive Center-Of-Car cushioning details. We have duplicated those same features underneath and on the ends, with the extended draft gear. The Claytor repaint features the original Apex crossover platforms with a Universal brake stand and brakewheel. Check out those gorgeous new 70-Ton Barber S-2 Birdsboro Foundry trucks with rotating -Timken- roller bearing caps, just like the prototype. These beauties are available with four road numbers!
Built-&-Ready Landmark Structures - Community Church
Assembled - 5-1/4 x 6-13/16 x 7-3/8 inches (13.3 x 17.3 x 18.7cm)
Features double entry doors with frosted glass panes, clapboard siding and tall stained glass windows.
60ft Pullman-Standard Flatcar - Ready to Run -- TTX VTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Walthers Cornerstone HO Scale Brick Sheets come molded in several appropriate colors, and are great for kitbashing, filling in windows and doors and other customizing projects. Each brick sheet measures 4 x 9-3/4in 10.1 x 24.7cm. These Brick Sheets are part of the line of Walthers HO Scale parts.
Includes four sheets
Realistic US-style brick pattern
Use for kitbashing and customizing
HO Modern Concrete Highway Overpass - Kit
Product Information
Modernize your HO streets and highways with the Cornerstone Modern Concrete Highway Overpass kit! Packed with authentic detail and designed for easy construction, the prototypes are typically found on routes handling hight-speeds and heavy traffic. Other features include:
Typical of pre-stressed concrete highway overpasses seen all across North America
Fits highway scenes from the 1960s to the present
Round and Square Support Columns included in short and tall styles to clear railroad or highway below
Build as single or double span - easily combine kits (each sold separately) for a larger assembly
Easy to install in new or existing layout scenes
Detailed abutments with molded cut lines for easy customizing
Parts molded in concrete gray
N Scale 89Ft Autorack - Canadian Pacific #543028
Built in 2005 and rebuilt in 2019, this Canadian Pacific 89Ft autorack with Barber Roller Bearing trucks featured an enclosed rack structure, a design that became the universal standard for most railroads. Commonly used to this day, the design prevented vandalism and pilferage and helped to protect vehicles from the elements.
50Ft Berwick Box Car - Detroit Toledo and Ironton
#18852
MODEL FEATURES:
Ready-To-Run
Full under body detail with brake rigging
Overhanging X-panel roof
Non-terminating sine wave ends
Separately applied wire grabs
Detailed end ladders and brake gear
Accurate painting and printing
Blackened metal wheels
AccuMate couplers
HO 34Ft Ribbed Hopper - NYC (4 pkg) #2
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Removable coal load in each car
Machined metal wheels
Mchenry scale knuckle spring couplers installed
A total of 9 different road numbers available for each road name
Minimum radius: 15inch
Evergreen Scale Models 2037 .037in Opaque White Polystyrene HO Scale Freight Car Siding (1 Sheet Pack)
.020in (.5mm)THICK X .037in( .95mm) GROOVE SPACING.
GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
REPLICATES 3.25in GROOVE SPACING IN HO SCALE
AVAILABLE IN 6in X 12in AND 12in X 24in SHEET SIZES
HO Pressureaide Covered Hopper - OMYA #51928
(white, blue)
N Scale Curved Track - 45-Degrees - 13-3/4 Inch Radius (4pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO Single Track Cut Stone Tunnel Portal
(4-1/2 x 4-1/2Ft) 11 cm X 11 cm
Product Features
Hand cast in durable resin.
Exquisite cut stone detail!
Single track entrance.
Can be cut with razor saws, and shaped with files.
Product Specifications
Scale: HO 1:87
Width: 4-1/4Ft (108mm)
Height: 4-3/8Ft (110mm)
Radio Antennas - Can Type, Plastic - pkg(6)
Used by ATSF and UP.
O (1:48) ABS Stair Rail (1Pc)
Use for hand rails on stairways. Precision Injection Molded in Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
Tip: ABS Stair Rails may be curved to fit circular application by softening them in warm water or heating with a hair dryer. Stairs may be modified to fit the circumference of a tank or other curved surface by cutting off the stair stringer from the side to be cemented. Tape the stair in place. Attach each stair step separately
SCALE
O
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
7/8In
HEIGHT IN MM
22.2mm
WIDTH IN INCHES
1-1/2In
WIDTH IN MM
38.1mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
24In
LENGTH IN MM
600mm
HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Chinese Red) #5160
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
HO ALCo RS-3 - DCC/Sound - CN (Green) #3023
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
3/32In Fluorescent Red Rod (8pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Red
HEIGHT IN INCHES
3/32In
HEIGHT IN MM
2.4mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
G (1:24) Custom Straight Staircase (1pc)
Use in interior applications where a closed casing is desired. Combine with other staircases to achieve many configurations. Precision Injection Molded in Styrene Plastic. ASSEMBLY REQUIRED
SCALE
G
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
19/64In
HEIGHT IN MM
7.5mm
WIDTH IN INCHES
1-9/16In
WIDTH IN MM
39.7mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
7-1/2In
LENGTH IN MM
190mm
HO ALCo RS-3 - DCC Ready - Norfolk & Western #306
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
Analog (DC) version has 21 pin socket for DCC module.
DCC non sound recommended decoder for Current Production (21 pin socket)
ESU #59629
or
TCS #EU-821 8 function decoder
FEATURES:
- Blue with Yellow lettering
- 7 foot cab
- cab mount horn
- body side number boards
- under deck storage box
- dynamic brakes
HO Instant Horizons(TM) Background Scene - Desert to Country
DIMENSIONS: 24 x 36 inches
Create a unique background for your layout with Instant Horizons. Easy to install, these printed backdrops add depth and distance by creating a smooth transition between you actual scenery and backdrop.
These special views smooth the transition between different kinds of scenery, creating a more natural and realistic change.
HO Scale EMD Style Diesel Shock Absorber/ Snubber - pkg(4)
Product Information:
GP/SD 40 and some GP/SD 40-2 units.
HO Scale GRS Cabinet
Our three-inch 1/16in tube, sold separately, fits down inside this larger diameter (5/64in OD, 0.066 ID) non-removable tube inside the cabinet. This makes a nice flange at the top of the cabinet. These cabinets will accommodate any length mast.
Service Van - Fire & Rescue
Expected Delivery: March 2020
At the curb or on the job, add color and variety to your HO vehicle fleet with SceneMaster Service and Delivery Vans!
Based on contemporary designs used by all kinds of businesses big and small, youll also find them in the ranks of the fire and rescue service.
Factory painted and printed in full color, the finished models look great on layouts and in collections.
Highly detailed, perfect for layout or collection
Each also includes modeler-applied side mirrors for more realism.
HO AutoFlood III RD Coal Hopper - PGNX #1132
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Seaboard Air Line #19703
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
BTN8 Momentary SPST Normally Open Pushbutton - Red (8/pk)
1/4 inch (6.35mm) mounting hole.
HO 53ft Reefer Container - Marten
A cool addition to contemporary HO intermodal operations, the Scenemaster 53ft Reefer Container will look great on rails or roads!
Features include:
- All-new model!
- Prototypes now in domestic service across North America hauling perishable food products
- Highly detailed refrigeration unit
- Realistic body details
- Colorful, contemporary paint and lettering schemes
- Perfect loads for WalthersProto or WalthersMainline well cars (sold separately)
- Instant detail for terminals, highways and industrial scenes
- Fully assembled, ready to use
Downtown Deco N Scale - The Trackside Tavern - Kit
HO Bathtub Coal Gondola - DREX (ex-CP) #1008
Built: 5-05
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
Styrene Sidewalk Sheet - 3/16in x 3/16in Opaque White Polystyrene Sidewalk (1 Sheet)
.013in (.33mm) GROOVE SPACING.
.040in THICK.
6in x 12in SHEET
HO Dragline - Kit
Product Information
Put this easy-to-build Walthers SceneMaster vehicle kit to work along your HO layout! The model features:
Designed for easy assembly - illustrated step-by-step instructions
Highly detailed to bring HO layouts to life
Used for all types of excavation & quarrying work from the 1950s to the present
Detailed crawler chassis, cab, lattice boom & bucket
Molded in 4 colors and clear plastic
Photo shows assembled model.
BSI- 102- Super Thin 1-3 Sec Glue 1oz
Tangent Scale Models HO Penn Central PC Samuel Rea Shops 4600 Covered Hopper
Product: PC Samuel Rea Shops 4600 Covered Hopper System
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps
Wheels: CNC-Machined 36in Wheels
Penn Central (PC) H51 Delivery Gray 9-1968 is one of those schemes that just defines a car type. The first 261 4600 cars built by PC Sam Rea were H51 class in late 1968. Painted light gray with black bays, the cars feature a small PC logo between the ribs on the right side of the car. Those black bays look sharp and show off the white PC reporting marks on the centersill, a feature carefully duplicated on this model. Check out that Peacock 6500 brake housing and beautiful modern brake wheel. The prototypes truck-mounted brake gear translates to little things on the model like a missing brake cylinder on the B-End. The 4 individual brake cylinders are actually mounted on the truck brake beams, duplicated on our 100-ton Barber S-2 trucks! The bays are equipped with Wine outlet gates with their distinctive gear housing mechanism on the one side. Penn Central lettering is something that we take great pride in here at Tangent. This is industry-leading Tangent artwork and graphics: carefully duplicated based on real photos, not generic diagrams. These Penn Central beauties are ready to operate on your layout.
EMD GP40 High Nose w/Sound DCC LokSound- Master Gold - Norfolk & Western (Blue/Imitation Gold) #1329
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake sqeals.
Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) #744293
1935+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO EMD SW900 - LokSound 5 Sound & DCC - Southern Pacific #2278
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- ESU LokSound 5 sound for DCC and DC layouts
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
HO EMD GP15T Diesel - DCC & Sound - Apalachicola Northern #722
ETA: July 2023
Detailed Information
AN FEATURES:
Nose-mounted single Grya light (Operational in DCC)
Operating class lights
5-chime horn
Roof mounted A/C
Unique body configuration
Apalachicola Northern was a 96-mile shortline running between Chattahoochee and Port Saint Joe, Florida. They rostered 3 unique GP15Ts which they ordered from EMD in 1983. They featured a non-dynamic hood, turbo charged prime mover, nose mounted Gyra light, and canvas sunshades. Delivered in a bright yellow scheme, by the mid 1990s they received a vibrant dark blue paint job. By 2010/11, the GP15Ts were purchased by the Genesee and Wyoming Group. Two (ex #720 and 722) were sent for use on their Bay Line Railroad in Alabama.
GP15 SERIES LOCOMOTIVE FEATURES:
Operating Class Lights (DCC only)
Operating Number boards
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 85ft ACF 44-Seat Coach - Union Pacific (Sunshine Special) #5480
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
Delivered new in 1954 from American Car & Foundry with seating for 44, the car is currently named for a Missouri Pacific train running between St. Louis and various Texas cities from 1915 to 1948 when the new Texas Eagle took over its route.
HO MLW M420 - DCC & Sound - Providence & Worcester (90s Scheme) #2005
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
10Ft 6In Modified 1937 AAR Boxcar - Southern Billboard #20440
40Ft Corrugated Container Beacon Horizon Lines 2pk
309572(1)/109610(0)
N Scale 60ft Coach Car - Wabash #1401
FEATURES:
- Based upon C&NW and CNJ prototypes
- Full scale dimensions and details
- All cars include separately applied window glazing, diaphragms and roof vents
- Observation car includes separately applied end railing details and a drumhead
- Detailed interiors (excluding baggage car)
- AccuMate operating knuckle couplers
HO RTR ACF 2970 Covered Hopper - ACF Demo #44504
Detailed Information
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons and stirrup steps
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple road numbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
HO MLW M420 - DCC & Sound - Providence & Worcester (As Delivered) #2003
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO 40Ft PS-1 Boxcar - Norfolk & Western (Black Repaint) #42506
Date: NK 9-73
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
Walthers SceneMaster 6050 HO Beef Cattle (16 pk)
Bring your HO farm scenes to life in minutes with this ready-to-use figure set! Molded in realistic poses
All Scale Tortoise Switch Machine Replacement Parts - Circuit Board
Product Information
Replacement parts for Circuitron Tortoise Switch Machines make it easy for you to maintain your turnout motors in tip-top shape! Common parts available include Spring Wires, Retaining Screws, Fulcrums, Output Arms with attached contacts and Circuit Boards. See the entire line of Circuitron Tortoise Switch Machines and products.
HO - ACF 5250 CF Hopper - Penn Central #897050
HO 60ft Hi-Cube Plate F Boxcar - BNSF #761255
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO SD70M - DCC & Sound - Union Pacific #4454
UP FEATURES:
UP lightning stripe scheme
Early SD70M body
Nathan K-3 horn
Air Dryer
Spare knuckles on rear pilot
Prime air filters
HTCR-II trucks
EMD low plow
Red sill stripe
GPS dome
Small can & Sinclair antennas
-Under Warranty- on cab
Late style fuel tank & breather piping
This release of UP SD70Ms depicts units from the first order, with early (non-flared) SD70M bodies in their as-built appearance. For later-era operations, a consumer-applied GPS dome is included.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Greenville 86Ft Double Plug Door Box Car - Conrail (Delivery 4-1978) #297805
- Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
- CNC-Machined 36 Inch Wheels
Conrail (CR) Delivery 1978 shows off the timeless CR boxcar freight scheme, and the car class that served the longest! While Conrail did absorb numerous predecessor series of 86ft Auto Parts Boxcars from Greenville, Thrall, Pullman and SRS, there was only ONE group of cars ordered and delivered new to Conrail. This 1978 Greenville order is significant, numbering 312 cars. The Tangent replica duplicates all of the delivery lettering exactly as applied by Greenville, from the big Conrail logo down to the 2 inch data and stencil marks. No generic CR data or fonts here ? this is hand-drawn from exact photos. The CR cars feature accurate body-mounted brake gear with all those visible rods and assemblies hanging below the car side just like they should. Did you notice the third arm mechanisms at the top of each door? We did, too ? they are accurate and appropriate for this car, as-built. SKUs -01 through -03 feature April 1978 data, and SKUs -04 through -12 feature May 1978 data. This is a big series of cars and they are ready to haul auto parts on your layout.
Anti-Glare Panels Lt Bl&Maro
HO Recovery Boiler House - Superior Paper - Kit
Product Information
Paper mills are some of the busiest spots along many railroads. The HO Scale Walthers Cornerstone Superior Paper Recovery Boiler House kit is a vital part of your layouts mill complex. Brown stock, the fiber and water solution produced in the Kraft mill, is concentrated in the recovery boiler via evaporation into a substance called black liquor. As the level of concentration increases, raw rosin is created, skimmed off the top, mixed with other chemicals and heated to produce tall oil. The tall oil is stored in tanks and shipped by rail or truck to manufacturers who use it in the production of glue, rubber, ink, soap and lubricants. The remaining black liquor is burned in the boiler to generate steam and energy for the entire facility. Other cooking chemicals are recovered at this stage for reuse in the paper mill.
The Recovery Boiler House will look great near other Superior Paper Co. mill buildings. If used by itself, this building makes a great addition to many modern industries.
The Recovery Boiler House measures: 11-3/4 x 8 x 17inch (29.8 x 20.3 x 43.1cm). The Superior Paper Recovery Boiler House is one of many Cornerstone HO Scale industrial buildings.
A major component of
Large industrial structure in a layout-sized space
Perfect for 1960s and later layouts
Use with other paper mill buildings
Makes a freat addition to other large industrial complexes
Tall rooftop tanks stacks
Molded in appropriate colors
F30A 50Ft Flat Car: PRR Delivery #475187
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
Spray Can - Gray Violet (Luftwaffe) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
HO Trinity 3-Bay Hopper - NS #294188
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
Athearn HO - 40ft Ribbed 3-bay Ballast Hopper - Union Pacific - #2 - 4pack
901462, 901477, 901505, 901508
Removable load
Separately applied wire grab irons and brake wheel
Solid nickel silver wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21069
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Tree Armatures - Deciduous - 2 - 3in (57/pk)
2 to 3inch (5.1 to 7.6cm)
Product Information
Use with all types of foliage to make trees. These unbreakable yet bendable armatures will not spring back to their original shape. Use pin on bottom of trunk for permanent mounting, or use the optional base for temporary placement. Ideal for use with Fine-Leaf and Clump Foliage (both sold separately).
Machinists Scriber - Single Ended, 100mm
HO GE Dash 9-44CW - DC/DCC Ready - Burlington Northern Santa Fe (BNSF Wedge) #4437
BNSF FEATURES:
High-mounted number boards
K3 horn
Front ditch lights
ATSF -Gullwing- cab
Standard brass bell
Part of BNSFs order in 1999, these were originally painted in the -Heritage 2- scheme from the factory. Over time with normal wear and tear, these units paint began to fade. As they got outshopped for major repairs, some were repainted into BNSFs current -Wedge- scheme. It was also common to see different variations of paint and parts used. Air conditioners and antennas were commonly changed out over time as seen on other equipment. We offer these variations based on collected research photos.
ROAD NUMBER SPECIFIC FEATURES:
#4433 Standard large dome antenna
#4437 Large dome antenna with dual -Skate- style antennas
#4484 Standard large dome antenna
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
N Old Homestead - Built & Ready Landmark Structures - Assembled
Product Information
Shes a bit rough around the edges and the prefect representation of an old rural bungalow, beautifully weathered and loaded with detail. Features include an outhouse, rusting propane tank, a couple of old barrels, a mailbox, old Bowser asleep on the front porch and more.
Measures: 2-1/32 x 2-29/32inch 5.2 x 7.4cm
HO SD38 - DCC/Sound - B&LE #866
BLE FEATURES:
Later large paper air filter box dynamic brakes, cab mounted gyra-light (upper light only), smaller fuel tank, ditch lights, no plow, rear brake wheel, extra jacking pads, yellow frame stripe, painted lower steps.
ROAD NUMBER SPECIFIC FEATURES:
#866
- Leslie 3 chime horn
- black painted left side walkway
- front and rear ditch lights
- battery danger decals
- modern loop style coupler cut lever
#867
- Leslie 3 chime horn
- front and rear ditch lights
- red coupler cut lever
#868
- Silver P3 horn and cab light housing
- Front ditch lights
- repainted nose and battery box effect
- faded lower steps effect
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO Procor 3000CuFt Aluminum Hopper w/Handrails - UNPX/ Procor Wordmark #127280
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO 89ft Thrall Enclosed Tri-Level Auto Carrier - TTX/ETTX Flat #331154/710851
Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these Walthers Proto models! Introduced in the mid-1970s especially to carry automobiles, the prototypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89ft flatcars with sidesill cut-outs and 28in wheels for added clearance. In service all across North America, the racks carry the owners logos, and most ride on flatcars leased from TTX with ETTX reporting marks.
A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
-Limited edition - one time run of these numbers!
-Prototypes in service from the 1970s to the present
-Factory-installed grab irons
-Separately molded and applied side ladders
-Ultra-smooth rolling metal axles with correct 28in wheels
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24in radius is recommended for operation.
High Self Adhesive Wild Meadow Grass Tuft Strips - 4mm (10 strips)
10 4mm high self adhesive Wild Meadow Grass tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.
N Scale PS 4427 Covered Hopper - B&O #602901
MODEL FEATURES:
- Body-mounted McHenry knuckle spring couplers installed
- Screw mounted trucks for accurate tracking
- Roller bearing trucks
- 36 inch machined metal wheels and RP25 contours
- Operates on Code 55 and 80 rail
- Weighted for optimum performance
- Packed in a jewel box for great display and storage opportunities
- Razor sharp painting and printing
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
Athearn Genesis HO 13,600 Gallon Acid Tank Car, Procor 3pk
Athearn Item #: ATHG25645
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Two different body phases (early and late)
Many separately applied details
Etched metal walkways
Different top platforms as appropriate per prototype
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18in
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry (TM) scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
HO 60ft Hi-Cube Plate F Boxcar - Union Pacific #354543
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
Champagne Gold Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
PSC Transfer Van - Canadian National #76577
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
HO 60ft Flat Car - Southern Pacific #599322
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO NSC 60ft Ingot Flat Car - RTAX Ebenezer Railcar Services
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
N Scale Scenic Accents Details - Park Benches (6/pkg)
Woodland Scenics N Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and hand painted for extra realism. The People Sitting figure set includes six assorted adult figures in standing and walking poses.
SFLC #254355 (Set 3) (5)
Detailed Information
MODEL FEATURES:
•Fully assembled and ready for your layout
•Separately applied wire grab irons and etched walkways
•Separately applied brake piping and trainline hoses
•Fine ladder detail
•Delicate cross-bracing on the floor
•Weighted for optimum performance
•Razor sharp painting and printing
•Prototypically correct 33in and 38in solid nickel silver wheels with RP25 contours operate on all popular brands of track
•Body mounted McHenry lower shelf operating scale knuckle couplers
•Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
•Replacement parts available
•Minimum radius: 18in
PRIMED FOR GRIME MODELS FEATURE:
•Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
•Faded base colors matched to the prototype
•Patches applied and shaped per road number matching each corresponding side to the prototype
•Perfect starting point for adding grime and rust
Canada Southern #3354
Bowser ready-to-run 70-Ton Offset Hoppers are based on typical cars used across the continent for hauling coal and aggregates. Layout-ready cars feature accurate decoration, molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton Offset Hopper is a great addition to your transition or classic diesel-era car fleet.
N Scenic Accents(R) Figures -- Graveside Service (5 Figures & Coffin)
Woodland Scenics N Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and hand painted for extra realism.
HO 52Ft Mill Gondola - GONX Railgon #310900
NEW FEATURES:
Refined end-sheet molded-on details
Improved rivet and bolt details
Corrected wire grab-iron placements
New top-chord details
New jack reinforcement pad details
New coupler cut lever mounting details
MODEL FEATURES:
Separately applied wire grab irons
Body-mounted McHenry operating scale knuckle couplers
33inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO RTR SD39 - DCC & Sound - Copper Basin Railway #303
CBRY FEATURES:
In the late 1980s, Copper Basin RY picked up some surplus Ex-SP SD39s for their copper concentrate trains in AZ. When purchased, they were kept pretty close to the old SP-specs other than the removal of some of the oscillating lights and the bell being moved to the long hood. They were repainted into this unique copper and grey paint scheme. Our models depict these details such as: front and rear large plows, rear brake wheel, P-3 Horns, FARR grilles, removed red warning lights, and road number-specific trucks and headlight placement.
ROAD NUMBER SPECIFIC FEATURES:
#302
Ex-SP 5321
high-mounted brake cylinder trucks
relocated headlight
unique front and rear stripe pattern, P-3 horn with mis-matched bells
removed red warning lights
modified L-window cab
whip antennas
#303
Ex-SP 5323
low-mounted brake cylinder trucks
unique front and rear stripe pattern, P-3 horn
removed red warning lights
modified L-window cab
whip antennas
white painted roof #304
#304
Ex-SP 5324
low-mounted brake cylinder trucks
unique front and rear stripe pattern, P-3 horn
removed red warning lights
modified L-window cab
whip antennas
white painted roof
SD39 SERIES LOCOMOTIVE FEATURES:
Separately applied air tanks
Coupler cut levers
Rubber MU hoses
Photo-etch stainless steel windshield wipers
Fine scale handrails
Non-sound version features 21-pin NEM DCC plug
See-through dynamic brake and radiator fans
Curved radiator fan grab iron
Exhaust stack
Frame-mounted bell (unless noted)
Detailed 4000 gallon fuel tank (unless different capacity is noted)
Flexicoil-C trucks with high or low brake cylinders (per prototype)
McHenry scale knuckle spring couplers
See-through cab windows
Bi-directional LED lighting
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Painted and printed for realistic decoration
Highly-detailed, injection molded body
Minimum radius: 18inch
Recommended radius: 22inch
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard Econami sound decoder by Soundtraxx
Engine startup sound sequence
Dynamic brake sound or Non-Dynamic Straight to idle on F4
Extra prime mover and horn sounds exclusive to Athearn
Sounds recorded from a real EMD 12-645E3
Multiple bell sound files user configurable via Configuration Value (CV)
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Current Keeper ready with on board expansion plug
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via CV changes
Juneco Scale Models Back Up Light - MLW Pyle Double Horizontal w/jewels, plastic (2/pkg)
HO Unpainted 3D Figures - Police & Perps (5pcs)
INCLUDES:
- 2 Police Officers
- 2 Perps
- Plus a passenger for the back seat of the car
NOTE: The police car is NOT included.
Suitable for any scene but made specifically to go with the Rapido HO scale Chevy Impala police car!
LOCOMOTIVE FEATURES:
CN “website†scheme
CN style plow
Correct trucks per road number
Forward and reverse ditch lights
Nathan K3L horn
#5620/#5624
Late EMD trucks
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
#1708 Roundhead Stainless Steel Screws 2-56 x 3/8inch- 12pcs
HO ATSF PS4750 Covered Hopper - Santa Fe (Delivery Gray 10-1979) #315932
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
ATSF -Delivery Gray 10-1979- is now available in the distinguished light gray paint with light blue -Santa Fe- lettering. This light gray scheme is very different from the previous Tangent ATSF offerings! The Santa Fe GA-905 class were built by Pullman Standard and leased from North American Car Corporation. Check out that sharp red/white/blue NACC badge! Featured details include prototypically accurate body-mounted brake hardware and scale-sized Miner -Selflok- outlet gates. We didnt stop there. This car is loaded with accurate Pullman-applied ATSF graphics and data. From the distinctive narrow style Roman numbers to individual North American Car Corp. car serial numbers on the center sill ? its all there.
Plastruct 90106 OD 1/4 Butyrate Tubing (7pcs pkg)
HO Greenville 86Ft Quad Plug Door Box Car - X60R Repaint 1976+ Large Logo - Conrail #295610
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Conrail (CR) -X60GR Repaint 1976+ Large Logo- is our first Greenville 86ft auto parts offering in the -early Conrail- era. These X60GR class cars represent the former Penn Central X-60-R original delivery cars that were produced in 1970. Conrail repainted some of these cars at Meadville, PA at the former EL shops, complete with a gigantic can opener between the paired set of doors. These 1970 cars have truck-mounted brake gear, End-of-Car Cushioning components and Gypsum crossover platforms along with accurate 70-Ton trucks and 33inch wheels. Our Conrail 1976 models are ready to operate with four different road numbers!
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Penn Central
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Evergreen Scale Models Opaque White Polystyrene Strips 14in .10x.188 (7pcs pkg)
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504969
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
HO GE AC4400CW - DCC & Sound - BNSF #5700
Detailed Information
BNSF FEATURES:
As-delivered appearance
Small plow
High mount number boards
Walkway mounted ditch lights
Late production units
K3 horn
BNSF/ATSF -Gullwing- style cab
Large roof GPS dome
Delivered in 2004, BNSF AC4400CWs 5654-5717 represented the continuation of a string of GE A.C. traction purchases dating back to 1999. As A.C. traction motors are well-suited to moving heavy loads at lower speeds, the units were usually found on coal trains, although they did appear on other types of service as well. Interestingly, in 2015, forty-one units (including 5665) were leased to Metrolink to serve as lead units while their cab cars were repaired, lasting in this service for about one year.
AC4400CW SERIES LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
N Scale ACF 50Ft 6In Boxcar - Pan Am #32018
FEATURES:
Prototypical non-terminating corrugated ends
Diagonal paneled roof
Single 10-foot YSD design sliding door (non-operating)
Detailed cross-member attachment rivets on the side sills
Weighted, detailed underframes
True scale dimensions with acccurate details
Equipped with AccuMate knuckle couplers
HO Alco FA-1 - DCC & Sound - Union Pacific #1635
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0018
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
PS-2 2003 2-Bay Covered Hopper - Denver & Rio Grande Western #18327
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
HO Large Farm Trailer - Kit
Product Information
Make quick work of all kinds of jobs around your contemporary HO farm with the Scenemaster Large Farm Trailer kit. Designed for easy construction with parts molded in colors, put your finished model to work behind most farm tractors, available separately.
Early - Staley #35094
HO FMC 60ft DD/SS Hi-Cube Boxcar - Cotton Belt/SSW #62671
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
MODEL FEATURES:
- Double 8 foot Youngstown doors
- Photo-etched coupler cross-over platform
- Separately applied grab irons, end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for trouble-free operation
- Body-mounted McHenry operating scale knuckle couplers
- 70 or -100 ton roller bearing trucks with 33 or 36 inch wheels per prototype
- Machined metal wheels with RP25 contours
- Minimum radius: 18 inches
Built & Ready Landmark Structures - Bettys Burning Building
Assembled - 3 x 4-5/16 x 5-5/8 inches (7.5 x 10.9 x 14.3cm)
Great for the center of an action-packed layout, this 3-story brownstone includes flickering lighting effects that create the illusion of a burning building. Custom paint and weathering add the finishing touch of a scorched exterior. The building also includes a exterior yellow light, printed interior and loads of details and scene-setting accessories such as signage, a bicycle leaning against the side, dumpster, wrought iron fire escapes, window treatments and more.
HO Broken Stumps (14pcs)
Use these lead-free metal castings to model wooded areas realistically where the trees might have rotted away or were damaged by a natural disaster. Castings include a base pin to allow easy attachment to layout.
ADMX #52340
(gray, blue; Molecule Logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. They have worn a wide range of colorful paint and lettering schemes over the years, 59ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59ft Cylindrical Hoppers feature:
Limited Edition - one time run of these roadnumbers!
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36In turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Pressureaide Covered Hopper - Archer Daniels Midland (Leaf) #50076
(gray, blue, green, Leaf Logo)
Wisconsin Central #1033
FEATURES:
70-ton roller-bearing trucks
Blackened metal wheels
Two-piece underframe
Separate brake cylinder
Air reservoir
End platforms
AccuMate couplers
HO 50Ft FMC 5077 Double Door Box - Southern Pacific SP #246045
MODEL FEATURES:
Separately applied grab irons, end ladders and brake wheel
Photo-etched cross-over platform
33inch machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO TTC G-Class Subway - DC/DCC/Sound - A-B Train #2 #5098+5099 (1 Married Pair)
Available as:
Gorgeous display model of a two-car train in St. Clair Station, OR
Four-car, operating model (silent or equipped with SOUND), OR
Two-car, operating add-on model (silent or equipped with SOUND)
Each Rapido Toronto Subway Car features:
Design created from original factory drawings and field measurements
Fully detailed interiors including seats, hand holds and lighting
Working lights: headlights, rear marker lights, destination sign
Fully detailed underbodies
Wire grab irons
DC/DCC ready or DCC/Sound (Display models are unpowered)
Display models include lighting powered by an included 12V DC power supply
Ages 14 and up. This is not a toy.
Enamel Paint - Panel Line Accent Color - Dark Brown (40mL)
Tamiya Panel Line enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml)
Examples of use:
Black is a general-purpose color and can be used for any type of model. Brown is great for military models as well as highlighting details on bright colors such as Yellow or Orange. Gray is perfect for White or Light Gray parts where Black may be too distinct.
Note:
Plastic parts may become brittle when using Tamiya Panel Line accent colors. Avoid using on movable parts and take care when applying to load-bearing areas. Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying it onto the model. Take care when applying on flat base coat colors as Accent Color paints may permeate more readily.
HO Delivery G43A 2-1968 Gondola - Penn Central #576062
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inchh Wheels
PC -Delivery G43A 2-1968- in the original Penn Central green paint scheme, and a PC version we have not yet offered! These gorgeous models have 2 placards in place for the PC reporting marks, road numbers, and ACI label on the left side of the car. On the right side is an additional placard that includes a PC logo and Penn Central lettering. These placards are utilized on this class of PC car since these cars have side corrugations on each panel, where they knew that putting paint on the corrugations would not last very long! These cars have corrugated ends, and the Tangent replica includes oxide red car interiors ? on the interior walls and ends ? like the prototype. We even duplicated the slight green overspray on the inside end corners! The 100-Ton trucks feature accurate rotating -Timken- caps.
HO ALCo RS-3 - DCC Ready - Ontario Northland #1306
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
N Scale Dash 8-40CM - DCC & Sound - BC Rail: Red/White/Blue #4603
Our N Scale Dash 8-40CM model features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
Heavy, die-cast chassis with a powerful motor and dual flywheels
Operational headlights and rear lights with operational factory-installed ditch lights (plus rock lights on BCOL locomotives)
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
Factory-installed couplers mounted at the correct height
HO PTC Antenna for EMD (1/pk)
HO 1937 AAR 40Ft Boxcar - CP5/5 Ends - Canadian Pacific (Spans the World) #227270
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Plastruct 91881 Brown Brick Paper Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
7-1/2 x 10
HO PS4750 Covered Hopper - L&N Family Lines (Original 12-1980) #242159
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
LN Family Lines -Original 12-1980- is an exciting offering for us, championed by Family Lines and CSX modelers alike. Built in 1980, the L&N cars have those distinctive wider jacking tabs associated with much (but not all!) of Pullmans late production. The center sill correctly models the brake linkage -access holes- on one side of the car, just like the real ones. Notice the side posts - they are the proper -closed hole- style at the bottom. This matches the L&N order exactly. Our 100-ton Barber S-2 trucks are beige to match the body paint. This is a big scheme, and we know the Family Lines modelers have been very patient.
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Southern Pacific #32971
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Budd Baggage-Dorm Original Scheme - VIA Rail #607
Each Baggage-Dorm includes:
Realistic stainless steel finish
Track-powered interior lighting compatible with DC and DCC layouts
Full underbody detail including separate air, steam and electrical lines
Separate metal grab irons, stirrups and end gates
Accurate D22 brake equipment and piping
Super-detailed 41-NDO-11 trucks with end frames
Full, multi-color interior detail
3D CP beaver shields on CPR models - not just a printed picture!
Sprung diaphragms
Metal Macdonald-Cartier knuckle couplers
GP39-2 Diesel, DCC & Sound - RDG #3401
ETA: October 2021
Detailed Information
RDG FEATURES:
Reading style cab roof rain gutter
2900 gallon fuel tank
Cab wind deflectors
Ratchet style hand brake
Electrical cabinet door on engineers side
In 1974 Reading received 20 GP39-2s from EMD. During their short careers on the Reading these 2300 HP, 12-cylinder turbocharged units were used system wide in all types of service, including coal and ore trains, hot shot freights and locals.
LOCOMOTIVE FEATURES:
All units are powered
Heavy die-cast frame for greater traction and more pulling power
DCC-ready features Quick Plug plug-and-play technology with both 21-pin connector (DCC-Ready only)
Factory installed SoundTraxx Tsunami2 sound and DCC decoder (DCC+sound units only)
Tsunami sounds are compatible with both DCC and DC operation (DCC+sound units only)
Genesis driveline with balanced five pole skew wound motor and dual flywheels
Directional constant lighting-featuring LEDs; headlight brightness remains constant
Scaled from prototype resources including drawings, field measurements, photographs, and more
Separately applied photo etched metal and injection molded detail parts:
Cab interior
Coupler cut levers
MU and Trainline hoses
Windshield wipers
Lift rings
Wire grab irons Sander lines
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body mounted McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Detailed Blomberg-B trucks with prototype-specific wheel bearings
Replacement parts available
Minimum radius: 18inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 decoder pre-installed
Sound units operate in both DC and DCC
Individual sound boards installed in both A and B units (sound units only)
All functions NMRA compatible in DCC mode
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Slow speed control
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Lighting effects such as beacons and Gyralight where prototypically accurate
A and B units often include sound decoders with different default pitch shift, so MU lashups sound unique
PROTOTYPE SPECIFIC INFORMATION
In the decade between 1974 and 1984, EMD produced the GP39-2 for seven North American railroads. The basic design followed most four axle road diesel switchers for the time. Borrowing improvements from the GP38-2 and GP40-2 designs, this mid-horsepower road switcher utilized a turbocharged 12-cylinder EMD 645E3 diesel engine for its prime mover. With 4 fewer cylinders, the smaller engine provided a distinctive long hood on the phase II and phase III bodies, where the clean room/engine compartment doors were set back from the cab further than predecessor locomotives.
Sensitivity to fuel economy in the 1970s justified the GP39-2 in the locomotive market. It also laid the ground work for EMD to start exploring locomotive designs that utilize engines with larger piston displacement yet possess fewer cylinders. This approach has become the foundation to modern locomotive technology.
3/16 inch OD Round Stainless Steel Rod - 22 Gauge x 12inch Long
Round Stainless Steel Rod - Not hollow (1 pc)
Outside Diameter: 3/16 inch
Athearn Roundhouse HO 50ft ACF Boxcar FEC #23127
MODEL FEATURES:
70-ton Roller Bearing trucks with 33in wheels
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Body mounted McHenry operating scale knuckle couplers
Wheels with RP25 contours operate on Code 70, 75, 83, 100 rail
Minimum radius: 18in
Specifications
COUPLER STYLE: McHenry Scale Knuckle
HO 59Ft Cylindrical Hopper - RTR - Canadian National #376537
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
One time run of these roadnumbers, order now - limited quantity available
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Thrall High Side Gondola w/Load - LEF&C (3pk) #1
MODEL FEATURES:
- Removable load
- Wire and plastic handrails, stirrup steps, ladders and underbody details
- Factory applied ladders, stirrup steps, and wire grab
- Highly-detailed, injection molded body
- 100-ton trucks with 36 inch wheels with RP25 contours operate on all popular brands of track
- McHenry scale knuckle spring couplers
- Highly-detailed, injection molded body
- Weighted for trouble-free operation
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Thrall was a recognizable freight car manufacturing company in the 1960s to 1980s. Their designs still carry on today. The company focused on building specialized freight cars including high side gondolas, and rotary-dump gondolas for coal. In the 1980s, Thrall acquired five competing railcar manufacturers and became the largest such manufacturer of these cars in the United States.
In the 1960s, coal haulage shifted from open hopper cars to high-sided gondolas. Using a gondola, the railroads are able to haul a larger amount of coal per car since gondolas do not include the equipment needed for unloading. However, since these cars do not have hatches for unloading the products shipped in them, railroads must use rotary car dumpers (mechanisms that hold a car against a short section of track as the car and track are slowly rotated upside down to empty the car) or other means to empty them.
HO Heavyweight 6-Wheel Metal Passenger Trucks w/RP-25 Metal Wheels - Type 2411 - 1 Pair
Product Information
The prototypes of this truck featured one-piece cast sideframes and were used on a wide range of heavyweight equipment. These trucks fit the Walthers (932-series) Heavyweight 12-1 Sleeper, 14-Section Sleeper and 3-2 Observation (all out of production), but adaptable to many other models. An easy upgrade for new and older HO Scale passenger cars, WalthersProto trucks are fully assembled and ready to use with built-in electrical contacts for car lighting and 36inch turned metal RP-25 wheels.
HO F7A EMD - DCC & Sound - Bessemer & Lake Erie/Freight #728A
B&LE UNITS FEATURE:
- First time in Genesis for later BLE orange & black scheme
- Back-up lights
- Winterization hatch
- Nathan M3 horn (A-units) / Leslie A-125 horn (B-unit)
- A-Units: Whip antenna, cab vent, nose side grab irons
LOCOMOTIVE FEATURES:
- Full cab interior
- Wire grab irons
- Coupler cut levers
- See-through cab windows
- Flexible rubber trainline hose
- Flexible rubber MU hoses
- Windshield wipers
- Lift rings
- Blomberg-B trucks
- Sander lines
- Directional constant lighting
- Headlight brightness remains constant
- Separately applied photo etched metal and injection molded detail parts
- Detailed fuel tank with fuel fillers, fuel gauges, breather pipes & retention tanks
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Accurately-painted and printed paint schemes
- McHenry scale knuckle couplers - Kadee compatible
- Fully-assembled and ready-to-run
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
- Replacement parts available
- Minimum radius: 18 inches
- Recommended radius: 22 inches
SOUND EQUPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Individual sound boards installed in both A and B units (sound units only)
- Engine, horn, and bell sounds work in DC
- Some functions are limited in DC
- All functions NMRA compatible in DCC mode
- Excellent low-speed operation
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Lighting effects such as beacons, Gyralight where prototypically accurate
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
HO MLW FPA-2u & FPB-2u - DCC/Sound - VIA Rail Canada #6759 & 6859
The entire FPA-2u and FPB-2u production is a CONDITIONAL RELEASE. If Rapido receives enough pre-orders by the order deadline, then production will proceed! If not, then they will never tool these models, and your deposit will be credited back to you.
The Rapido FPA-2u and FPB-2u models feature:
- The only HO scale MLW FPA-2u and FPB-2u units ever. Full stop. End quote.
- Operating headlights, class lights and back-up lights
- Canadian-cast Dofasco Type B trucks
- Full underbody piping and conduit
- Separate grab irons and handrails
- Correct MLW-specific large-capacity fuel tanks
- Heavy, die-cast chassis
- Rapidos improved 5-pole motor with dual flywheels
- Full, multi-color interior
- DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
- Accurate sounds recorded from the REAL FPA-2u #6758
- Improved light grey color on the CN 1961 scheme
Spray Can - Dark Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 60ft Hi-Cube Plate F Boxcar - BNSF #761082
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline(R) 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO ET44 Tier 4 - DCC Equipped - CN/100th Anniversary #3221
Road number 3108 Has a black cab roof; does not have the circle graphic on the nose
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO Greenville 86Ft Quad Plug Door Box Car - Delivery 12-1969 - GTW #305774
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Grand Trunk Western (GTW) -Delivery 12-1969- is notable for several reasons. First, the classy GTW scheme looks especially good on this car (in our humble opinion) with the large GT logo centered between the paired doors. Second, GTW was the largest purchaser of Greenvilles quad door box car design, making them highly statistically relevant for modelers in the US and Canada. Painted in the characteristic GTW blue color with white stenciling, these cars are sure to be crowd pleasers and were seen widely. The GTW cars feature their as-built 1969 appearance that includes Gypsum crossover platforms, Ajax brake hand brake housing, Greenville-applied tack board locations and that beautiful End-of-Car Cushioning underframe setup. 70-Ton Trucks with 33inch wheels and rotating -Benco-6- roller bearing caps finish off this dominant offering. Our GTW masterpieces are available in eight different numbers.
HO SD60 - DCC/Sound - SOO Line #6054
MODEL FEATURES:
Locomotives come with railroad-specific details including: Operating beacon (in DCC/Sound version), horn, winterized hatch, antenna, handrails, etc.
SPECIFICATIONS:
DCC: Equipped with Econami2
PROTOTYPE MANUFACTURER: EMD
Axles: 6
LIGHTED: LED Lighting
PROTOTYPE AND BACKGROUND INFO:
In 1984, Electro-Motive (EMD) introduced the 60 series locomotive. These had many improvements over the earlier models including features such as: New and improved EMD 710 power plant producing 3600 HP, wheel slip control, computerized cabinet replacing the older and unreliable components.
This design spawned into many other upgrades within its class like the modernized wide cab, Isolated cab, and even the start of AC traction technology.
These locomotives were suited for just about any mainline service that could be thrown at them. The model was fairly popular with class one railroads, with Norfolk Southern purchasing the most at 151 units. Most of them are still in service today. Norfolk Southern in 2010 started a large full rebuild program of their SD60s (including purchasing cores from other sources) into SD60Es, which rebuilt them from the frame up with new electrical components and a newly designed cab to improve visibility and forward crash impact safety.
HO 5820 Covered Hopper - Procor/UNPX (Low Black Solid) #122776
Era: 1990s+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
N Scale Grain Elevator w/Ladders and Platforms
Two-60ft or one-120ft Elevator(s).
Rix Products N Scale Grain Elevator. This elevator represents the style of elevator used all over the country at farms and industries. The Rix N Scale Grain Elevator offers a highly detailed elevator with ladders, platforms and distribution box. The Grain Elevator can be built in 30 foot increments up to any height you wish. Color matches galvanized metal. Grain bins not included.
HO EMD GP39-2 - DCC & Sound - Portland and Western PNWR #2311
Detailed Information
PNWR FEATURES:
Ex-ATSF
Early Phase 1 body
Front and rear ditch lights
Illuminated number boards
Nathan 3-chime horn
Removed class lights
Small EMD front plow
Large front anticlimber
-Switcher- style walkway steps
Blomberg M trucks
Road number specific antenna placement
The Portland and Western was founded in 1995 taking over former Southern Pacific branch lines in Oregon. It operates a combined 516 miles of track throughout the state and is part of the large Genesee & Wyoming Railroad group. The PNWR also has a subsidiary, the Willamette and Pacific. The WPRR motive power can be seen on PNWR trains as they were used anywhere on the system as needed. Major transported commodities pertain to the lumber industry, but also include many other goods. They operate many older EMD locomotives, some dating back to the 1950s! The ex-Santa Fe GP39-2s become a favorite on the railroad, with a few still painted in Santa Fe colors.
ROAD NUMBER SPECIFIC FEATURES:
#2304
Genesee and Wyoming corporate scheme -Corvallis-
Xenon beacon (effect in DCC mode)
unique white logo on nose, cab mounted headlights
alternate flashing ditch lights (effect in DCC mode)
standard bell
#2311
Faded Santa Fe colors with W&P/P&W patches
nose mounted headlight
alternate flash ditch lights (effect in DCC mode)
standard bell
#2316
Genesee and Wyoming corporate scheme -Albany-
25th anniversary logo
cab mounted headlights
standard ditch lights
electronic bell
GP39-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Union Tank Car #17334
Built: 7-37
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
HO F89F Trailer - TTX/Brown #152206
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast underframe
- Wire formed brake plumbing
- Detailed deck
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Minimum radius: 22 inches
- Recommended radius: 24 inches
HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Early Red) #475083
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
Diesel EMD SD40-2 - Saint Lawrence & Hudson #5615
ESU LokSound DCC & Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
HO Straight Track Sections - 9 3/4in (246mm) (4/pkg)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes!
Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation.
Suitable for all types of layouts, temporary or permanent, this modular track system features an integrally molded roadbed for realistic appearance.
Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
HO Roman Stencil Letters & Numbers - Black - 12, 6, 4inch - Waterslide Decals
Description: (formerly 87-326-2) Alphabets - Roman Freight Stencil - Black
HO SD70ACe - DCC & Sound - Norfolk Southern #1112
Overview
NS FEATURES:
Late-production 11XX series units
PTC Antenna roofs
Late handbrake wheel, anticlimbers, jacking pads & EFCO buttons
Extra MU detail parts included
Built in 2014, these NS units came with isolated cabs and PTC antennas. 175 were built on this order, and all are still on the active roster, albeit with 9 units currently in storage. They are used on all types of freight trains.
SD70ACE SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO EMD MP15AC Diesel - DCC & Sound - Southern Pacific #2734
SP FEATURES:
Ground lights
Nathan P3 horn
Hood-mounted bell
Large fuel tank
SP style cab number boards
Full SP light package on both ends
Looking for heavier road switching power, SP turned to EMD in 1975 for 58 MP15ACs to add to their roster. A small batch, #2732-2735 were used as slug mothers mated to a rebuilt EMD switcher slug for use in Roseville, California. Many of them were absorbed into the UP at the merger. After their tenure on the UP came to a close, quite a few found service on lease fleets and short lines still seen operating today.
MP15AC LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Lift rings
Windshield wipers
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Operating ditch lights (if equipped)
Operating ground lights
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and -printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Plastruct 91251 Clear Plastic Sheet .030 (3pcs pkg)
.030x7x12 inches
HO Scale H1b Hudson Steam - DC/DCC Ready - Canadian Pacific (Delivery) #2816
-Early walkway w/smoke deflectors
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO Scale - 1951-55 Tandem Axle Fruehauf 34Ft West Coast Style Reefer - Unpainted and Resin Cast Kit
HO EMD SD40-2 - DCC Ready - New York, Susquehanna & Western #3018
With these easy to use and affordable locomotives, you can digitally control speed, lighting, and direction!
-DCC equipped
-All-metal chassis
-5-pole motor
-Operating headlights
-E-Z Mate(TM) couplers
-Compatible with all NMRA-compliant DCC systems
-Performs best on 18 inch radius curves or greater
48Ft All Purpose Well Car - TTX #456262
Features:
Floor with correct ovals and cut-outs.
Two hitches
Etched walkways
Four IBC bins.
Detailed brake components
Prototypically accurate paint schemes
Recommended 24inch radius
Late - Conrail Grey Quality Logo #889095
HO Scale Code 83 Flex-Track Brown Tie 25 pcs, 36inch 90cm Long Section
Use RibbonRail Tools to make radius accurate the first time.
N Scale Modern Tagger Graffiti Decals - Set #6 (9pcs)
Love it or hate it, graffiti is everywhere. We do not condone painting graffiti on real railroad cars, buildings, bridges, etc. and it is against the law. But defacing your model railroad with Blair Lines Graffiti Decals is fun and still legal as far as we know! All decals are reproductions of graffiti found on real railroad cars.
All of these graffiti decal sets are now lasercut! What this means is you will no longer have to trim these decals close. You only have to cut a couple of small tabs and soak the sheet in water. As an added bonus, the decals are now printed on white decal paper making them more opaque!
HO Scale AMD103/P42 - DCC Ready - Amtrak (50th Anniversary Phase 5) #46
Detailed Information
AMTRAK FEATURES:
Amtraks five commemorative 50th Anniversary P42 locomotives were created to celebrate 50 years as Americas Railroad, each with a different design. The lineup includes old favorites (Phase I and Dash 8 Phase III), a present day (Phase V) and two new designs (Midnight Blue and Phase VI). Athearn is working closely with Amtrak to authentically replicate each of these special liveries that will be operating across their system.
Collect all five!
-Concept art provided by Amtrak and
may vary from actual Locomotive
ROAD NUMBER SPECIFIC FEATURES:
#46
Bolt-on nose
PTC antenna farm
#100
Bolt-on nose
PTC antenna farm
AMD103/P42 SERIES LOCOMOTIVE FEATURES:
Officially licensed product of Amtrak (Amtrak-painted units)
3 different nose variations: Amtrak as-built, Amtrak rebuilt, and Via
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Flexible rubber MU hoses
Flexible rubber trainline hose
Scaled from prototype resources including drawings, field measurements, photographs, and more
Separately applied wire handrails
Exhaust stack
Photo etched metal radiator fan grille
Highly-detailed underframe including air tanks with air lines, air filter, and air dryer with two different types of rock shields
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting including operating ditch lights and red marker lights
Completely-redesigned die-cast frame for superior tractive effort
Packaging securely holds model for safe storage
Fully-assembled and ready-to-run
Accurately painted and printed paint schemes
N Scale AutoFlood III RD Coal Hopper - CEFX #600530
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO 60ft PS Auto Box - Southern Pacific/SP #621125
MODEL FEATURES:
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Fully detailed full cushion underframe
- Full underframe detail: air brake reservoir, control valve,
- Separately applied door closure rods, side ladders, metal grab irons and brake cylinder with plumbing and brake rod details
- etched metal end platforms
- 100-Ton roller bearing trucks with operating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Machined metal wheels
- Weighted for trouble free operation
- Multiple road numbers
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
During the 1960s, Ford Motor Company, Pullman Standard and Santa Fe pooled their resources to develop a standard boxcar to meet the transportation needs of automobile manufacturers in the United States. Delivered in 1965, the Pullman Standard auto parts boxcar is the most prolific example of this type of freight car. It ultimately changed the face of automobile manufacturing and rail transportation.
PRIMED FOR GRIME MODELS FEATURE:
- Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Some Prime for Grime models feature paint scheme variations.
HO ACF 5250 Covered Hopper - ARCO Polymers (NDYX) #86
Features:
Ready to run
Injection molded plastic
Fine scale detail
Etched metal roof walk
Metal knuckle couplers
Road specific hatch and outlet configurations
Road specific roof walk variations
Three body style variations
Separately applied wire grab irons and wire brake lines
Crisp painting/printing
Free-rolling 100-ton trucks
HO ACF 2970 Covered Hopper - MKT (3pk)
MODEL FEATURES:
-Round or trough hatches
-Photo-etched metal roof walk
-Separately applied wire grab irons and stirrup steps
-Separate brake cylinder, valve and air reservoir with wire brake plumbing
-Detailed outlets
-Multiple road numbers
-Fully-assembled and ready-to-run out of the box
-Accurately painted and printed
-Highly detailed, injection molded body
-Separately applied brake wheel
-Machined metal wheels
-Screw mounted trucks
-Body mounted McHenry operating scale knuckle couplers
-Weighted for trouble free operation
-Wheels with RP25 contours operate on all popular brands of track
-Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
-Minimum radius: 18in
PROTOTYPE INFORMATION:
The 2-bay covered hopper first entered service in the 1950s. The cars handle loads such as cement, sand and similar denser bulk commodities. In the 1960s, American Car and Foundry introduced the Centerflow design. The Centerflow relies on the cars rounded body to provide structural strength without the added weight of bracing, as well as making gravity unloading easier. This 2-bay car came in a 2,970-cubic foot capacity.
Colored Weathering Powder - Medium Rust (1oz)
There are several basic methods and approaches to using these powders and we are sure you will probably develop a few of your own! These powders are intended to make rolling stock, buildings, and detail pieces look old, dirty, dusty, rusty, faded, and generally the worse for wear after being exposed to the elements of weather, travel, pollution, and mechanical wear and tear.
#1716 Stainless Steel And Nylon Screw Assortment 4 of each
Help avoid down time & work stoppage by making sure the proper mounting hardware is available at all times. Each screw assortment contains 8 of the most popular screw sizes (4 each) for most of your coupler mounting needs.
4 Each
1-72 x 1/8inch Stainless Steel
1-72 x 1/4inch Stainless Steel
1-72 x 3/8inch Stainless Steel
1-72 x 1/2inch Stainless Steel
2-56 x 1/2inch Nylon Plastic
2-56 x 1/4inch Stainless Steel
2-56 x 3/8inch Stainless Steel
2-56 x 1/2inch Stainless Steel
HO Scale US&S Switch Timer/ Lock - 4pkg
This is a package of four
Fine Turf - Green Grass - Bag (21.6 in3)
Use Green Grass Fine Turf to model low grasses, leaves and weeds. Highlight and accent trees and landscape to add color variations. It is colorfast and blends naturally with other foliage. Use for any scale.
Individual bag provides enough Fine Turf to create realistic landscape on various areas of your layout.
0.025 inch Thick Copper Flat Sheet - 6x12inch
Copper Flat Sheet 0.025 inch Thick (1 pc)
15.2 x 30cm
HO Scale Color Light Signal Head
This signal head can be used with any of our Signal Ground Mast Assemblys to create your own unique Color Light signal build. The kit consist of pewter and resin parts and detailed instructions. Our Color Light LED Assembly (must be purchased separately) is designed to fit into this signal head to make lighting this signal head easier.
60ft Pullman-Standard Flatcar - Ready to Run -- TTX VTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Evergreen Scale Models 9007 - .015in Clear Oriented Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
HO RTR SW1500 Switcher - DCC & Sound - Conrail #9617
ETA: January 2023
Detailed Information
SSW FEATURES:
SP-style lighting package with -head knocker- style Gyralight fixtures
P-3 horn
Flexicoil trucks
As-delivered configuration with footboard pilots, pilot face grab irons, early cut levers and corner frame gussets
1,100 gallon fuel tank
Full cab interior
In the first half of 1968 the Cotton Belt received their first SW1500s and they came with all the features of their SP counterparts of that era.
SW 1500 LOCOMOTIVE FEATURES:
Detailed cab interior
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Drop steps unless noted
MU stands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Exhaust stacks
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
Printed numberboards
Fine scale handrails
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
HO Enterprise 2-Bay Covered Hopper - New York Central (NYC Gothic) #881424
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
Gunderson Multi-Max Auto Rack - Norfolk Southern
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
HO Spur & Yard Track Derail w/Switch Stand & Two Styles of Posts & Decals (1 Set)
HO RTR 40Ft Offset Ballast Hopper w/Load - Wisconsin Central #110
Detailed Information
MODEL FEATURES:
Removable load
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied wire grab irons and brake wheel
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Replacement parts available
Minimum radius: 15inch
Solid nickel silver wheels with RP25 contours operate on all popular brands of track
G2 Dash 9-44CW - DCC & Sound - CN #2572
ETA: Late October 2022
Detailed Information
CN FEATURES:
CN -teardrop window- cab
Nathan K3L airhorn
Canadian style ribbed anticlimbers
Electronic fuel gauges
Spare knuckles on rear pilot
No air condiitoner
Late (angled) stepwell gussets
Canadian AAR style control stand
Front and rear ditch lights mounted on anticlimbers
Standard medium front snowplow; small CN style rear rock plow
Wi-tronix antenna included in poly bag; install for 2010+ era
CN NOTES:
After receiving an order for Dash 9-44CWLs with Canadian 4-window cabs, CN reverted to the standard 2-window configuration for its subsequent orders. However, to increase the crews visibility, CN requested that the front windows be modified with angled panes (these are known as -tear drop- windows).
DASH 9 SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Beginners Guide to HO Model Railroading - for the Novice Model Railroader Book # 9
Level 1 - Beginner
Contains layouts HO-1 through HO-12. Entry level instruction book offers 12 layout plans, large clear diagrams, benchwork information, and track laying instructions and tips.
Plans can be built with Atlas Code 83 or Code 100 track.
Now includes Atlas Master DCC wiring instructions
Newly revised book contains twelve layouts built with either Atlas code 100 or code 83 track. Now includes code 83 track products required listings (in addition to code 100 listings); large, clear layout diagrams; and complete contruction and wiring instructions. Written in modern, simple language,. Perfect for the novice.
Approx. 1/4 inch OD Round Brass Tube (Streamline) 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch (Streamline)
Outside Diameter: 1/8 inch
HO PS-2-4427 High Side Covered Hopper - Wisconsin Central WC Restencil 1987+ #97838
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
Wisconsin Central WC Ex-Milwaukee Restencil 1987+ throws a little bit of love to the early days of the Wisconsin Central. The WC startup freight car fleet was a rag-tag group of patched cars. Our WC model features the patches and reweigh data of a 20-year-old MILW car, including MILW 1980s data and the new WC reporting marks for its new owner. The yellow is also a slightly darker shade on the model, to reflect dirt and era-appropriate color changes. Yes, we even applied the accurate WCL Railcars Inc. lessee stencil on the bottom right corner. With an original 1967 built date, these WC Ex-MILW cars follow the details of earlier PS4427 High Side prototypes, including center sill supports between the bays and solid end running board supports. We have also applied replacement roof hatches and Morton-style crossover platforms on each end, modeling its 1980s appearance. This is cool example of 1987 Regional Railroading.
HO Slopped Bearings Cap (8pcs)
HO RTR PS-2 2600 Covered Hopper - L&N #201534
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
HO Scale GP38 - DC/DCC Ready - CSX (Grey & Blue/ B Scheme) #2013
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO EMD GP40R - DCC & Sound - Canadian National (Ex-IC) #3123
2012+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO MLW M630 - DCC/Sound - PGE #713
(Two tone green w/lightning stripe, face mounted ditch lights)
Ready To Run and Fully Detailed!
Features:
- MU Hoses
- air hoses
- windshield wipers
- operating headlight
- window glass
- can motor
- flywheels
- blackened nickel silver wheels with RP25 flanges
- knuckle couplers
- handrails installed
DCC and Sound version features LokSound V5 decoder.
Analog (DC) version has 21 pin socket for DCC module. (recommended decoder - ESU #59629)
Sound Retro Fit kit C628 loco: #691-1225
HO SD60M Wide Cab Diesel - DCC & Sound - Union Pacific, As Delivered #6364
Expected in May 2022
Detailed Information
UP FEATURES:
Large EMD plow
Front ditch lights
Nose headlights
Included in this run of UP SD60Ms are both early and current versions. These locomotives were used in just about every service, hauling coal and fast intermodel, to drag freights and locals. As of a few years ago, a small batch were taken out of retirement, repainted and sent back out to work.
We are offering both as-delivered and current versions to satisfy UP modelers in different eras.
ROAD NUMBER SPECIFIC FEATURES:
#2442
Post 2018 repaints with flag and wings scheme
yellow sill
modern PTC antenna setup
Nathan M-3 horn.
#2457
Post 2018 repaints with flag and wings scheme
yellow sill
modern PTC antenna setup
Nathan M-3 horn.
#6317
As-delivered appearance in 1993. Red-sill
Leslie 3-Chime horn
fire cracker antenna.
#6364
As-delivered appearance in 1993. Red-sill
Leslie 3-Chime horn
fire cracker antenna.
LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully-assembled and ready-to-run
Replacement parts available
Minimum radius: 18inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Light Green
Available in six realistic colors and great for making bushes, hedges, shrubs and trees. Each package includes 12 oz volume of material
Talus - Extra Coarse Gray (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings and or road cuts. Intermix grades and blend shades for the most realism. Color Natural Talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle Talus and secure with Scenic Cement (#191).
Particle size- Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
Edge Connector for Tortoise(TM) Switch Machine w/Tan PC Board (2pk)
PLEASE NOTE - this Edge Connector is designed for use with Tortoise(TM) switch machines manufactured before May/June 2020 that feature a tan 33mm wide PC board.
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include servo-based slow-motion Switch Machines, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
Designed to simplify converting your existing Tortoise(TM) Switch Machine, the Edge Connector features:
- Plug and play wiring for Tortoise(TM) Switch Machines manufactured before June 2020 with smaller, tan PC board (sold separately).
- Includes 6 inch motor connection cable with plug for direct connection to Stall Motor Controller 942-161 (sold separately).
40Ft Corrugated Container Ocean Network Express 2pk
TLLU #620498(6) UETU #620540(5)
HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4508
8inch stripe w/ water expansion tank and ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
Conrail Northern Region In Color - Douglas N. Leffler
RELEASED: February 1, 2017
Conrails Northern Region was comprised of three divisions of the former Canada Southern Railway and Michigan Central Railroad routes through Canada and Michigan. These three Conrail divisions were called the Canada Division, Detroit Division and Michigan Division. The illustrations and text in Conrail Northern Region take the reader on a journey on all three divisions from Niagara Falls, Ontario, Canada west to Detroit and beyond through Southern Michigan.
Atlas Ho Scale Code 83 Right Hand Switch Machine
Remote control switch machines allow you to throw the switch (therefore changing the direction of the rails) from a remote location on your layout, rather than on the switch itself. Our Code 83 switch machines are the smallest HO Scale machines on the market! These units will fit on both Code 83 and True-Track and Snap-Switches
Structure - Brick Mission-Style Santa Fe Depot - Kit
The finished Brick Mission-Style Santa Fe Depot measures:
11-5/16 x 6-7/16 x 3-3/4in
(28.7 x 16.3 x 9.5cm)
The Walthers Cornerstone HO Scale Brick Mission-Style Santa Fe Depot is based on a standard Santa Fe design used across the railroad. This style of brick train station was typically used for larger towns that were a county seat. Depending on the location a matching brick freight station was often built as an add-on to the depot or nearby as a freestanding structure. While the depot was a Santa Fe design similarly styled stations were used on several railroads. This easy-to-build kit includes the realistic brick structure, window glazing featuring unique detailing in the operators bay, wood trim, downspouts, a brick platform and realistic printed signs. Many of these structures still stand and many have been repurposed for other uses, so the Brick Mission-Style Santa Fe Depot will look great on any layout set between the 1930s and the present.
Santa Fes standard county seat depot used system wide
Use alone or combine with Brick Freight Station (933-4056, sold separately)
Great station for smaller cities and towns
Detailed brickwork, separate windows and doors
Brick platform
Easy-to-build plastic kit
Molded in three colors and clear glazing
Realistic printed signs
HO 1988 G43B Coil Svc. Gondola w/ Coil Racks (Coils Not Included) - Conrail (CR) #601805
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -1988 G43B Coil Svc.- With Coil Racks ? Coils Not Included in the now-classic Conrail red paint. This series represents the former PC-painted G43B series. Conrail maintained the lettering locations that PC did, painting the Conrail reporting marks, road number, and Conrail can opener logo in the same locations PC had stenciled them. The G43B prototype features cushion draft gear, giving the model a distinctive look compared to the other G43 classes. The top chord of the car has a -COIL STEEL LOADING ONLY- stencil to remind customers and railroad officers that the car is equipped with coil racks. Our model has coil racks too, and we sell beautifully executed steel coils for this car separately. We recommend a load of four coils if you want to replicate most prototype loading patterns ? for the size of coil we created. Yes, we did the math. These Conrail coil service gondolas are offered in 12 road numbers and feature details appropriate for these 1969-built cars.
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
HO SD60I Wide Cab Diesel - DCC & Sound - Terminal Railroad Association #4001
Expected in May 2022
Detailed Information
TRRA FEATURES:
Ex-CR
Isolated Cab
No plow
Small PTC antenna setup
Front ditch lights
Electronic-style bell
Acquired in 2020, these two ex-CR units were purchased and painted into this bright and attractive scheme to operate near the TRRA headquarters in St. Louis, MO.
LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully-assembled and ready-to-run
Replacement parts available
Minimum radius: 18inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Deluxe Custom Gas Pumps - Mobil (2pk)
Pre-painted cherry red, one with white globe. Labeled with Mobil brand.
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
HO 34Ft Ribbed Hopper - BNSF (4 pkg) #2
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Removable coal load in each car
Machined metal wheels
Mchenry scale knuckle spring couplers installed
A total of 9 different road numbers available for each road name
Minimum radius: 15inch
Walthers Cornerstone 3887 N Modern Suburban Station Kit
Product Information
Revitalize commuter service in any trackside community with the Cornerstone HO Scale Modern Suburban Station! This detailed structure kit is typical of updated facilities that have replaced aging depots and is packed with details.
Perfect for suburban communities big or small
Typical of new stations built from the 1970s to the present
Highly detailed brickwork, separate doors and windows
Includes ticket vending machine, station signs, platform access ramp, gas meter, electrical panel, safety and security posts, rooftop air conditioner and vents, and more!
Colorful printed signs
Molded in six colors
Complete your scene with the Modern Parking Lot kit (933-3886, sold separately)
Liquid Cement for Plastics
Fast-Drying Liquid Cement with Precision Applicator; Use for polystyrene and ABS plastic; Bonds plastic by dissolving and cementing; Precision applicator makes easy work of gluing even small intricate detailed parts.
AVOID CEMENT ON FINGER TIPS, AS GLUE SMUDGED ON AREAS NOT TO BE JOINED CANNOT BE REMOVED.
It will also discolor or cloud up clear parts.
Do not use on clear parts.
Road Grader
Put this easy-to-build Walthers SceneMaster vehicle kit to work along your HO layout! The model features:
Designed for easy assembly
Highly detailed to bring HO layouts to life
Must-have for modern highway departments & road construction scenes
Includes ripper, front dozer blade & position able scraper
Cab interior
Molded in two colors and clear plastic
BASIC WEATHERING SET - 3 Bottles - 35ml each
Essential set to reproduce basic weathering effects for all branches of modelling. Chipping liquid (Worn Effects), also includes a neutral wash that is very useful for many colors and our odorless high quality thinner. A set as basic as red, black or white colors.
Includes:
AK-049 Odorless Thinner
AK-088 Worn Effects Acrylic Fluid
AK-677 Neutral Dark Grey Wash
HO Consumer Product Signs - 1940-50s (42)
Consumer Product Signs 1940s-50s. Contains 42 full color posters and signs. HO Scale. Unique weathering and application instructions included in all poster/sign packs.
HO 66ft Bulkhead Flatcar - BCIT (Intl Scheme) #818112
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
Fox Valley Models N Bi-level Auto Rack
Conrail
Features:
Die-cast underframe
Finely Molded Details
Etched Metal Panels
Formed Wire
Sharp Painting & Lettering
Multiple Road Numbers
Die-Cast Underframe
Metal Wheelsets
Micro-Trains Trucks & Couplers
N Scale Short Barrel Ore Hopper - CN Mineral Brown #346045
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO GMD-1 - DCC & Sound - Canadian National (1900s Noodle w/ Red Cab) #1907
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
RTR 52Ft Mill Gondola, GONX/ RailGon #310877
MODEL FEATURES:
Fully assembled and ready for your layout
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
33In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
Open top cars, such as gondolas, have been a mainstay on railroads for decades as they are ideal for carrying large, bulky loads such as coil steel or scrap metal loaded by crane.
HO GMD SD40-2W - DC/DCC Ready - CNNA (Dynamic Map) #5356
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
HO Ultimate Mobil Gas Station Detail Set
Custom details, sign sheets, and pole sign to complete a Mobil Gas Station Scene.
N Scale Bettendorf Trucks w/ long ext. couplers (1pair)
50Ft PS 5277 Box - E&LS #101701
Detailed Information
MODEL FEATURES:
Single 10ft Pullman Standard door
Separately applied grab irons, end ladders, and brake wheel
Photo-etch coupler cross-over platform
Fully-assembled and ready to run out of the box
Painted and printed for realistic decoration
Weighted for trouble free operation
Machined metal wheels and RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of -In Service- equipment; -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per road number matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - CSX #242013
Product Information
Serve a wide range of HO industries with the 37ft 2980 Cubic-Foot Two-Bay Covered Hoppers from WalthersMainline. Based on prototypes introduced in the late 1980s, they can be found hauling cement, fracking sand, roofing granules and similar loads. Features of the layout-ready models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from late 1980s to the present
Separately molded and applied hopper gates
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
HO Thrall High Side Gondola w/Load - LEF&C (3pk) #3
MODEL FEATURES:
- Removable load
- Wire and plastic handrails, stirrup steps, ladders and underbody details
- Factory applied ladders, stirrup steps, and wire grab
- Highly-detailed, injection molded body
- 100-ton trucks with 36 inch wheels with RP25 contours operate on all popular brands of track
- McHenry scale knuckle spring couplers
- Highly-detailed, injection molded body
- Weighted for trouble-free operation
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Thrall was a recognizable freight car manufacturing company in the 1960s to 1980s. Their designs still carry on today. The company focused on building specialized freight cars including high side gondolas, and rotary-dump gondolas for coal. In the 1980s, Thrall acquired five competing railcar manufacturers and became the largest such manufacturer of these cars in the United States.
In the 1960s, coal haulage shifted from open hopper cars to high-sided gondolas. Using a gondola, the railroads are able to haul a larger amount of coal per car since gondolas do not include the equipment needed for unloading. However, since these cars do not have hatches for unloading the products shipped in them, railroads must use rotary car dumpers (mechanisms that hold a car against a short section of track as the car and track are slowly rotated upside down to empty the car) or other means to empty them.
HO Heavy-Duty Fire Engine - Assembled - Red
Product Information
This SceneMaster HO Scale Heavy-Duty Fire Truck fills a critical role in the modern Fire Department, carrying equipment and personnel ready to handle dangerous fires. This heavy-duty rig is perfect for assignment to a firehouse in the industrial district of any HO Scale city (similar vehicles are used for heavy and specialized rescue companies, as well as incident command and control units and mobile hospitals) and looks great parked with your collection too!
Each SceneMaster vehicle is a highly detailed replica, using die cast metal and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations. Use the Heavy-Duty Fire Truck alongside other SceneMaster HO Scale emergency vehicles.
Licensed replica of popular International truck
Must-have for modern HO model railroads
Perfect size for collectors
Fully assembled and painted
Realistic chrome parts as appropriate
Die cast metal and plastic parts
HO C-20 ICC Caboose w/Lights - DCC Ready - Norfolk & Western #500854
ETA: April 2022
Detailed Information
The ultimate detail with the best Genesis features.
International Car Co. began specializing in caboose production as early as 1941. When the railroads entered the 1960s, many needed to replace their aging, in some cases home shop built, cabooses. International Car responded with a product that could be tailored to each railroads specific needs. Using quality components and modern engineering, ICC became a leading name within the industry.
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
NW FEATURES:
N&W C-20 Class caboose
N&W Blue scheme with -Hamburger- style logo
Friction Bearing Trucks
Air horn (Functions in DCC)
Propane tank and basket
Functioning interior lights in DCC
ICC CABOOSE FEATURES:
Better than brass detail including roadname and road number specific detail and laser-sharp painting and printing
Interior seating for the addition of crew figures.
See-through end platforms and steps
Flush window glazing
Wire-form grab irons
Caboose trucks with animated rotating bearing or static friction bearing caps
Axle generator details
Body-mounted McHenry scale knuckle-spring Couplers
Machined metal RP25 profile wheel sets
Fully-assembled and ready-to-run out of the box
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Separate wireform grab irons, etched metal coupler platforms
Coupler lift bars, trainline hoses, brake hoses, and hardware
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Weighted for trouble-free operation
Multiple road numbers
Minimum radius: 18inch
LED LIGHT EQUIPPED FEATURES:
LED lighting for long life and reliable operation
On-board DCC Decoder by NCE – Operates in DCC and Analog (DC) with lighting functions controllable in DCC
Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
(not all cars have marker lights)
LED Interior Lights
All functions NMRA compatible in DCC mode
Digitrax DCS 240+ LocoNet Advanced Command Station
Supports up to 400 locomotives and throttles.
On-board USB port.
Three RJ12 LocoNet ports
Supports SoundFX and sound decoder programming using Digitrax SoundLoader app over USB.
5amp/8amp Booster with multi-scale capability.
Built-in booster transponding detection provides Operations mode CV read back.
Locomotive reset button.
EZ route setup button and system editable routes.
Improved Programming track.
Updated design.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Erie #79054
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Circle Keystone) #727423
1948+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO EMD GP40 Mother and Slug - DCC & Sound - MKT (Green & Yellow) #226, 501
1982+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Slug is fully powered! Motor tucked into frame and body
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Tru Color Paint - Acrylic - BNSF Green - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO PC&F 5241 CUFT - Boxcar - Pan Am - (B&M) - Single Car #3380
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
All Scale Learning Kit - River/Waterfall
Learn to create the illusion of water depth, make a river and a waterfall.
Realistic Water will model a river approximately 1 in w x 28 in l x 1/8 in d (2.54 cm x 71.1 cm x 3.17 mm).
Water Effects will model a waterfall approximately 1 1/4 in w x 5 in l x 3/32 in d (3.17 cm x 12.7 cm x 2.38 mm).
Value-packed tools specifically developed to teach beginning modelers and other hobbyists how to use the Terrain and Landscape Systems. Learn to sculpt terrain, cast, color and install rocks, landscape various scenes, create paved areas, make trees, model water features and other scenic details. Reseal packages for easy storage.
HO Coalveyor Bathtub Gondola - David Joseph (Teal) #30964
FEATURES:
Die-cast chassis
Ready-to-run
Interior bracing
Removable coal load
AccuMate couplers
Brake detail
100-ton roller-bearing trucks
Fine scale wheels
Accurate painting and printing
These cars were usually run in blocks of 4-12 units, carrying
construction and demolition debris.
Tru Color Paint - Acrylic - Empire Builder Orange - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
Built-&-Ready Landmark Structures - Meg A. Watts Transformers
Assembled - 8-7/16 x 6-27/32 inches (21.4 x 17.4cm)
Great for an industrial park or along a railroad spur, this weathered building features full roof details, a rooftop water tower, crated transformers, movable overhead wire spooling assembly, vintage signage and more.
HO Switch Motor & Tie Mount
Simulates electric motors used on prototype turnouts controlled by a dispatcher.
1/2 inch OD Round Aluminum Tube - 0.029inch Thick x 12inch Long
Round Aluminum Tube (1 pc)
Outside Diameter: 1/2 inch
HO 53ft CIMC Container Set, UMAX
Road numbers:254682,254691,254762
Prototype Information:
Contemporary domestic intermodal operations are based on the 53ft long dry-van container. Atlas Model now introduces an entirely different 53ft steel-bodied container in HO scale, the CIMC 53. Present operators include Norfolk Southern, Union Pacific and the recent UMAX.
Features:
Side corrugations with an 8-55-8 arrangement
Front wall with 10 vertical corrugations
Roof with 6-54-6 corrugations
1-3-1 beveled doors
Placard Holders on front wall, sides and door
Each road name comes with three road numbers per pack.
HO 40 ft Hi-Cube Corrugated Container - Ocean Network Express (ONE)
(Magenta w/White Lettering)
This Walthers SceneMaster HO Scale 40ft Hi-Cube Corrugated-Side Container will add a modern touch to your intermodal terminals, highway scenes and railroad operations!
Ready for service on your layout as loads for and well cars and container flatcars.
Features include:
- Improved door latch detail
- Great detail for terminals and industrial scenes
- Realistic loads for any well car
- Ready to use
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Weyerhaeuser #1113
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Tru Color Paint - Acrylic - Santa Fe Red - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Greenville 86ft Double Plug Door Box Car - Penn Central #295148
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Release Date: August 2021
Penn Central (PC) -Original 1968- is our second foray into the world of Penn Central 86ft Boxcars. Previously, our PC offering was a repaint of a former PRR car. This time? We are living to the words of our last press release, where we promised delivery PC cars in the future. That future is now: the Greenville-painted original PC cars, classed as X-60M, are here. Built in October 1968, these cars have the large PC graphics on the side of the car. The -When Empty Return to- stenciling is to Chicago Heights IL, again representing the service to/from the Ford Chicago Stamping Plant. PC-distinctive details stand out on this replica, including a gorgeous Peacock 850 hand brake and Morton crossover platforms. 100-Ton Trucks with 36inch wheels and rotating Timken roller bearing caps finish off this PC offering. These stunning models are now available in eight road numbers – do not miss them! Can you ever have too many 86ft PC Greenville box cars? We don’t think so…
HO 13,600 Gallon Acid Tank Car - Procor/White (PROX) #16502
ETA: July 2023
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
HO Marine Industries Piggyback Flatcar - Canadian Pacific #505704
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
1:87 CAT 12M3 Motor Grader
Details:
1:87, Wheel Loader
Dimensions:
4 x 1½ x 1⅝ in
103 x 37 x 42 mm
HO 40Ft PS-1 Boxcar - Ann Arbor (Direct Route) #1401
Date: BLT 4-57
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
Road Number Specific Details:
#1401, 1405, 1406
Have Pullman 8Ft Raised Panel Door
#1402, 1404, 1409
Have Pullman 8Ft Corrugated Door
Lift Rings - Flat - Mounts on Pilot Beam - pkg(8)
Peco PLS 130 SmartFrog V6
SMARTFROG
The Smartswitch(TM) system can be used to operate turnouts, semaphore signals, level crossing gates and barriers and other moving features. This Smartfrog unit facilitates changing frog polarity when using the Smartswitch system to operate turnouts. Watch the videos to see the potential uses and ease of installation of this system and see our Shows You How booklet No. 24 Operating Points and Signals.
Recommended to be used with:
Suitable for all scales and gauges up to and including Gauge 0
Yellow Silt
Seal your base and add color all at once! Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Undercoat lays a base for creating dark depths to shallow shorelines, and underwater scenes for any aquatic ecosystem. Create customized colors by mixing Water Undercoat together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
HO 40Ft Plug Door Box Car - Thanksgiving 400 Special (PRLX) #1621
Features:
Colorful holiday themed painting and lettering
AccuMate couplers
Roller-bearing or friction-bearing trucks where appropriate
AccuMate couplers are made under license from AccuRail, Inc
Micro Gloss Clear Finish
Water clear, nonyellowing, acrylic resins adhere strongly to paint and plastics and hide decal film. Can be applied with a brush, or airbrushed (40lbs pressure), cleans up with water.
Provides a smooth surface for decaling and produces a high-gloss wet look when dry.
HO Dash 8-40CM - DCC & Sound - Canadian National: Stripes #2427
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
HO Sexy Scenes: Lovers in Action on Chair #1
HO 60ft Bulkhead Flatcar - MILW #67242
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
HO 53ft GSC Flatcar - Delaware & Hudson #16509
FEATURES:
- One-time run of these car numbers, limited quantity available, order now!
- Now with die cast metal body for excellent performance empty or loaded
- Prototypes in service from 1950s to early 2000s - some in work train service today
- Used to carry all kinds of cargo including machinery, lumber, steel shapes, rail and various building materials
- Fully assembled with finely detailed body and deck
- Correct 33 inch RP-25 metal wheelsets
- Proto MA(TM) metal knuckle couplers
HO 19,600 Gallon Tank Car - Tate & Lyle #51007
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Date: BLT 3-98
HO 85ft General American G85 Flatcar - GTTX (Brown) #300316
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
HO Scrap Yard Conveyor - Kit
Product Information
The prototypes for the Walthers Cornerstone Scrap Yard Conveyor receive cut scrap metal from the Ferrous Shear or bales from the Baler-Logger and moves them into a truck or gondola for shipment. Sometimes the material is piled on the ground where it can later be picked up by an electromagnetic or grapple-type crane.
While offered as an accessory for use with the Walthers Cornerstone Washington Salvage Scrap Yard kits, this conveyor is an ideal addition to any industry that processes scrap metals. Scrap yards, the steel industry and economic markets are closely linked. The demand, and the price paid for scrap governs how long a yard will store or how quickly it sells its scrap. If demand or prices are low for any product, volumes for that product build up and the piles get high. When demand and prices rise, stored volumes are sold off quickly to generate a profit. Washington Salvage Scrap Yard is actually two businesses - an auto salvage business and a scrap business. Washington Salvage Scrap Yard includes plastic kits and ready-to-use cast resin details. The plastic kits are easy to assemble and come with complete instructions.
Great detail for metal processors or industries with scrap steel
Concrete base and steel supports
Easy-to-build plastic kit
Molded in appropriate base color
Measures: 9-1/4 x 1-3/4 x 3-3/8inch (23.4 x 4.4 x 8.5cm)
GLa 2-Bay Hopper: New York, Ontario & Western #1312
Detail Variations:
Single Car
As operated from 1933 to the 1953
Features:
All-new tooling
Scaled from original blueprints
Die cast frame and floor for optimum weight
Full interior rivet and bracing details
Factory installed wire grab irons
K- or AB-brake gear installed as appropriate
Factory installed Kadee #158 couplers in narrow draft gear box
Turned metal wheels in correct PRR 12D-F8 trucks
Accurate paint and lettering
Multiple road numbers available for each paint scheme and railroad
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15110
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Master Plus 5250 Covered Hopper - Seaboard Coast Line #260016
Features:
Updated tooling
Ready to run
Injection molded plastic
Fine scale detail
Etched metal roof walk
Metal knuckle couplers
Road specific hatch and outlet configurations
Road specific roof walk variations
Three body style variations
Separately applied wire grab irons and wire brake lines
Crisp painting/printing
Free-rolling 100-ton trucks
Rail Pal(TM) 2-Sided Pad Rescue (Heavy Cleaning)/Maintenance (Cleaning)
for HO Scale, N Scale, O Scale Tracks
Handy for quick fixes. One side is a Rescue Pad, the other a Maintenance Pad.
Remove build-ups and oxidation
Smooth burrs and track imperfections
Improve track conductivity
HO RTR 53Ft Platewall RoadRailer Trailer - Conrail/ Norfolk Southern (Triple Crown) #461393
(white, Large Logo, NS-CR Logos)
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - CIL Monon #9098
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 50ft Waffle HC Plug Door Boxcar - SCL #90947
MODEL FEATURES:
- Separate brake wheel
- Body-mounted McHenry operating scale knuckle couplers
- Machined wheels with RP25 contours
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
HO GP38 Gold - DCC Sound - CENTRAL MAINE & QUEBEC RAILWAY #3812
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate? knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
AccuMate? couplers are made under license from AccuRail, Inc.
Sound Features for Gold Series :
(DCC Operation)
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F31 .
Follows all NMRA DCC standards and recommended practices
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes ?on the fly? are provided for true realism
Green Poly Fiber - 9/16oz (16g)
A synthetic fiber intended for use with ground foam to create undergrowth, vines and economical trees.
HO 16,000-Gallon Clay Slurry Tank - UTLX #12251
MODEL FEATURES:
- Separately applied fittings nozzle, manway, and small safety valve nozzle
- See-through Photo-etched metal walkways and end platforms
- Full brake plumbing and rigging including brake wheel, air reservoir cylinder, triple valve, brake linkage, trainline, brake rod, large brake
- Printed marking on the sides, ends, and top of the tank body
- Fine scale side ladders
- Placard holders
- Printed marking on the sides, ends, and top of the tank body
- Equipped with McHenry AAR upper/lower shelf couplers
- 36 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Multi-packs feature unique road numbers
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Kaolin, a fine white clay, is produced by the natural chemical weathering of aluminum silicate minerals such as feldspar. Mined in the southeast United States (primarily Georgia and Florida), kaolin is used in the manufacture of ceramics, bricks, light bulbs, cosmetics, medicines and food additives. The largest use is in the manufacturing of paper, especially in creating glossy paper. Kaolin is shipped both as a dry powder in covered hoppers and in tank cars with water as a slurry. In the slurry form the weight of water requires the tank cars be smaller capacity compared to other liquids such as ethanol and LPG. Identical tank cars are also used to haul calcium carbonate slurry, used in the making of lime and cement.
One of the more modern versions of the 16K Gallon Tank car is designed and manufactured by UTLX Manufacturing Inc (formerly Union Tank Car). The car is a 286K (referring to a 286,000 pound gross rail load limit) design with a capacity of approximately 16,000 gallons. The capacity varies slightly between UTLX and Englehard, the operators of the cars. The car is an AAR Plate C clearance car with a 111-inch I.D. tank and an overall length of 44 feet. For a complete bottom unloading the car incorporates a Funnel-Flow design. The cars are lined and kept in dedicated service to avoid cross-contamination.
Highway Overpass Roadway Kit
includes - 4-22 Ft (3 inches) wide by 50 Ft (7 inches ) wide roadways
Note - Pikestuff guardrails not included
The Rix Modern Highway Overpass for HO scales is modeled after the bridges built today to span over railroad tracks. This style of bridge is typical of most new construction and is used all over the country. The Rix Modern Highway Overpass consist of 50 foot spans which interlock together so that any length bridge can be built.
HO 40Ft Hi-Cube Dry Containers - Ocean Network Express (ONE Pink) (3pk) Set #1
3 pack road numbers include : ONEU 000001/000087/000659
Body: Type A
Door: Type B
Latch: Type D
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
HO Tidy Track - Dust Monkeys (4pk)
Dust Monkeys are an easy, convenient way to remove dust from track and stop further accumulation during regular train operation. They hang from rolling stock axles out of sight!
N Scale NSC 64 Ft 6000 Cubic Gondola HS - TLPX #2238
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO 1958 Cu Ft 2 Bay Covered Hopper - Closed sides
Chicago and North Western #69383
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
B-100-40 Boxcar: SP/UP Shield Repaint - Single Car #656389
Detail Variations:
6-pack includes the following numbers:
#656293
#656318
#656319
#656389
#TBA
#TBA
Our B-100-40 model features the following details:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Genuine Kadee #158 Whisker couplers
Newly tooled trucks with turned metal 36 Inch wheels
Separate door rods and door tracks
Road number specific number patches
Separately applied coupler cut levers
HO GE C30-7 - DCC & Sound - Conrail #6608
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
N Scale 36ft Old Time Stock Car - CCCC #2444
MODEL FEATURES:
- Era: 1890s-1910s+
- Separately applied roof walk
- Molded truss rods with turnbuckles
- Highly-detailed, injection molded body
- Screw mounted trucks for accurate tracking
- Truck mounted magnetically operated knuckle couplers
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Fully assembled and ready-to-run
HO 4900 Dump Truck w/Snowplow & Salt Spreader
Product Information
Licensed replica of popular International trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled and painted
Die-cast metal and plastic parts
This medium-duty truck line was introduced in the late 1980s. Powered by a Navistar DT inline six-cylinder diesel engine capable of up to 350 horsepower, the 4900 series has been a great starting point for a wide range of commercial vehicles, including delivery vans, single- and dual-axle semi tractors, as well as fire apparatus and other government applications.
INTERNATIONAL(R) and other International Truck trademarks are licensed by International Truck Intellectual Property Company, LLC.
HO Hole-In-One Donut Shop - Kit
FEATURES:
- Fits 1950s to the present
- Unique addition to any suburban layout scene
- Eye-catching rooftop donut
- Three walk-up and large front windows
- Colorful decal signs
- Easy-to-build plastic kit
- Molded in four colors plus clear window glazing
MEASUREMENTS:
5-1/8 x 2-1/2 x 5-1/8 inches
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Nickel Plate Road #558
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO 57ft Mechanical Reefer - Union Pacific/ARMN #756010
Move all kinds of perishable products on your HO railroad with Walthers Mainline 57ft Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s.
Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including:
-Limited edition - one time run of these roadnumbers
-Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
-Keystone or Hydra-Cushion underframe detail as appropriate
-Short ladders and low hand brakes
-9ft Youngstown plug door with separate latch bars
-Authentic Stanray peaked, ribbed roof with capped exhaust stack
-Detailed underbody with brake gear and fuel tanks
-70-ton roller bearing trucks
-Correct 33in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
N Scale 50Ft NACC Box - Delaware & Hudson D&H #28042
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
N Scale 1 Amp Mobile Decoder for Atlas Locomotives
Features:
- Board replacement decoder for Atlas N-Scale SD60, SD60M, SD50 and others
- Golden-White Surface Mount LEDs for added realism
- Decoder Lock equipped
Note: In January 2012, DN163A1 was changed from larger through hole LEDs for lighting to smaller surface mount LEDs. Both versions work the same way. This was a manufacturing change to make the process more efficient.
Do not settle for a decoder without the latest features in your locomotive!
HO ET44 Tier 4 - DCC & Sound - CN Heritage/Elgin, Joliet and Eastern #3023
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO RTR SD40 (SD40-2) - DCC & Sound - FURX #3005
Detailed Information
FURX FEATURES:
SD40 rebuilds, from many sources
Front ditch lights
Correct details per road number
Rear mounted break wheel
ROAD NUMBER SPECIFIC FEATURES:
#3001
Ex-SOO. Smaller 3600 gal fuel tank
extended range dynamic brakes
large EMD plow
deck mounted front ditch lights
#3005
Ex NDM. Large 4000 gal fuell tank
extended range dynamic brakes
Canadian style plow
pilot mounted front ditch lights
#3025
Ex-MP. Large 4000 gal fuel tank
regular dynamic brakes
small EMD plow
pilot mounted front ditch lights
extra MP style jacking pads
LOCOMOTIVE FEATURES:
LED lighting
Photo-etched stainless steel windshield wipers
Fully assembled and ready-to-run
Separately applied wire grab irons
Separately applied air tanks
Coupler cut levers
Rubber MU hoses
Fine scale handrails molded in engineering plastic
Non-sound version features 21-pin NEM DCC plug
See-through dynamic brake and radiator fans
Curved radiator fan grab iron
Exhaust stack
Frame mounted bell (unless noted)
Detailed 4000 gallon fuel tank (unless different capacity is noted)
Flexicoil-C trucks with high or low brake cylinders (per prototype)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body featuring new tooling
Painted and printed for realistic decoration
See through cab windows
Bi-directional LED lighting
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
Recommended radius: 22inch
SOUND EQUPPED MODELS ALSO FEATURE
Onnboard Econami sound decoder by Soundtraxx
Sound units operate in both DC and DCC
Engine startup sound sequence
All functions NMRA compatible in DCC mode
Dynamic brake sound or Non-Dynamic Straight to idle on F4
Some functions are limited in DC
Extra prime mover and horn sounds exclusive to Athearn version
Slow speed control
Multiple bell sound files user configurable via Configuration Value (CV)
CV chart included in the box
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
CV chart included in the box
Current Keeper ready with on board expansion plug
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via CV changes
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - BLUX #1005
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Code 100 Nickel Silver Bridge Track End Set - Includes 2 End Track Pieces, 2 Spacer Ties
FEATURES:
- Models 150-pound rail used on high-speed and heavy traffic lines
- Thin profile ties in realistic dark brown with enhanced wood grain detail
- Fine profile molded spike and tie plate details on each tie
- Spike-mounting holes positioned next to the rail
- Molded starter points on underside of ties for center spikes
- Custom formulated nickel silver rail for improved electrical conductivity
Designed for use with left-over sections of Code 100 Bridge Track (#948-10004, sold separately), this set includes:
- Two Bridge Track End Pieces
- Two end piece wood Filler Ties
HO RTR SD40T-2 - DCC & Sound - Wheeling & Lake Erie/ Ex-D&RGW #5391
ROAD NUMBER #5391 FEATURES:
Ex DRGW
Still in original paint.
Tall ditchlights
K-5 horn
No nose gyralight
White number boards with black numbers.
Small -WE- patch on cab sides.
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Separately applied air tanks
See through cab windows
Welded ECAFB
Photoetch windshield wipers
LED Lighting
HTC truck sideframes
All-wheel electrical pickup
See-through dynamic brake fans
-Mushroom- nose vent on right side
Separately applied wire grab irons
Fully assembled and ready-to-run
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox speific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body
Painted and printed for realistic decoration
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for troublefree operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Replacement parts available including motor brushes
Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard Econami Sound by SoundTraxx
Sound units operate in both DC and DCC
Sound units operate in both DC and DCC
All functions NMRA compatible in DCC mode
Full DCC functions available when operated in DCC mode
Some functions are limited in DC
Engine, horn, and bell sounds work in DC
Slow speed control
All functions NMRA compatible in DCC mode
CV chart included in the box
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
RTR 67Ft Trinity 6351 4-Bay Covered Hopper - CIT Group-Capital Finance
Product Information
Expand grain traffic in minutes with layout-ready WalthersProto(R) 67Ft Trinity 6351 Four-Bay Covered Hoppers! Introduced in the early 2000s, these large-capacity cars are industry favorites for handling dired distillers grains (DDG), malt and many other food products. Other features of these HO Scale replicas include:
Limited edition - one time run of these roadnumbers!
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct 36Inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Enterprise 2-Bay Covered Hopper - Canadian National (CNR Delivery) (6pkg) #1
6-Pack includes the following numbers, all individually packaged: #113025, #113043, #113086, #113094, #113155, #113161
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
Walthers SceneMaster HO Flexible Self-Adhesive Paved Roadway Vintage and Modern No Passing Zone
(Double Yellow Centerline, White Edge Marks
HO SD38 - DCC/Sound - Conrail (NS) #3818
ROAD NUMBER SPECIFIC FEATURES:
#3805
- White patch with black numbers
- faded paint effect
- triple clasp brakes
- large fuel tank
- rear mounted Leslie 3 chime horn
- front ditch lights
- angled cab roof antenna
- Prime A/C
- small EMD plow
#3818
- Black patch with white numbers
- faded paint effect
- triple clasp brakes
- large fuel tank
- rear mounted Leslie 3 chime horn
- front ditch lights
- cab roof antenna
- Prime A/C
- no plow
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
N Scale Single-Track Curved Viaduct - R249-45 (R 9-13/16in-45)(2/pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Undecorated Car
Includes all appropriate optional parts
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Bathtub Coal Gondola - MWCX (ex-CP) #100403
Built: 3-06
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
1/4 inch OD Square Brass Tube 0.014inch Thick x 12inch Long
Square Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 1/4 inch
HO Magnetic Signal Co. Model 13 Wigwag Flagman
Red LEDs purchased separately on this page. This model requires a control circuit if you want it lighted. The banjo is static.---- We cannot guarantee that other red LEDs will fit into this model. LEDs were developed in partnership with Richmond Controls.
HO Waterslide Decals - Cargill 50ft Freight/Tank Cars - Corn Syrup
F30A 50Ft Flat Car: PRR 1960s Era #475179
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
HO Procor 3000CuFt Aluminum Hopper w/Handrails - UNPX/ Procor Wordmark #127267
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO EMD SW9 - DCC & Sound - Boston & Maine (B&M As Delivered) #1224
Boston & Maine:
Delivered in 1952
-Trash can- style spark arrestors
Deck mounted side handrails
Hood mounted number boards (road number specific)
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Early CWSX #140003
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Locomotive & Wagon Weathering - Enamel Paint Set (3)
This set contains:
AK7001: Streaking Grime
AK7002: Rust Streaks
AK7003: Neutral Grey Wash
Brass Strip - 12inch x 1 inch x .032inch
Length: 12inch
Width: 1 inch
Thickness:0.032inch
HO 53ft Railgon Gondola - Seaboard System #481637
(Patched Ex-Railgon, black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft Railgon Gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
A great addition to your HO freight car fleet, the models feature:
-Based on Railgon 310000 series cars
-Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
-Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
-100-ton roller-bearing trucks
-Correct 36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO AutoFlood III RD Coal Hopper - CEFX #600555
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Walthers SceneMaster All Scale - Tear and Plant Meadow Grass - Light Green
Measures 7-7/8In x 9In 20 x 23cm
Product Information
SceneMaster ready-to-use Tear and Plant products are perfect for adding grass in large areas. Available in a variety of styles and seasonal colors to add realistic vegetation to any layout from Z to G Scale, ready-to-use mats are flexible to fit uneven terrain and are easily cut or torn to fit available space. Use Tear and Plant Grass Mats along with other SceneMaster scenery materials to add realism to your layout!
Realistic plants in minutes - requires no special skills!
Easily cut or torn into smaller pieces or to fit available space
Great for adding a realistic variety of plants to any area
Flexible for easy use on uneven terrain
Ready to use
Varied colors and flocking for added realism
Flexible transparent base blends into existing scenery
HO - Nathan Diesel Air Horn (Brass Casting) - 5 Chime K5
59 Ft Cylindrical Hopper - Ready to Run - Logimex NDYX #816903
(gray, black, blue and white logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
-Limited Edition - one time run of these roadnumbers!
-Model of a National Steel Car 4550 cubic foot car
-Fully assembled, ready to run
-Thousands used in North American grain and potash service from 1972 to the present
-Trough or round loading hatches as appropriate
-Four different car numbers for each roadname
-See-through running boards
-Detailed brake gear, roof hatches and end ladders
-Correct 36Inch turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO ACF 4600 3-Bay Centerflow Hopper - ACF Leasing (ACFX) #49597
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
HO H-6-G - DCC & Sound - Canadian National Railway (Tilted Wafer) #1403
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO 5820 Covered Hopper - DCLX (Dow Chemical) #7214
Era: 1988+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO 70-Ton 12-Panel Hopper - Denver & Rio Grande #14718
Blt.6-66
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO Marine Industries Piggyback Flatcar - Canadian Pacific #505652
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SECX #2305
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO PC&F 5241 CUFT - Boxcar - Guilford - (B&M) - Single Car #3249
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Washington Salvage Scrap Yard - Kit
Product Information
Build Scrap Metal Traffic on Your Railroad
The old sayings -everything old is new again- and -one mans trash is anothers treasure- certainly applies to salvage businesses like the Walthers Cornerstone Washington Salvage Yard. Today, the range of man-made materials being recycled into new products is growing and includes all kinds of metals, rubber, plastics, paper and more. Combining office and a large work area into one structure, Washington Salvage is typical of the main buildings at many businesses, especially todays materials recycling facilities found in many communities. And, this combination of brick office and steel garage structure has been common since the 1960s, so your model could also serve as a county or city highway department garage, bus barn for a local mass transit authority, construction company offices, a railroad maintenance vehicle garage, truck or farm equipment dealership or any one of hundreds of similar businesses.
Scrap yards, the steel industry and economic markets are closely linked. The demand, and the price paid for scrap governs how long a yard will store or how quickly it sells its scrap. If demand or prices are low for any product, volumes for that product build up and the piles get high. When demand and prices rise, stored volumes are sold off quickly to generate a profit. Washington Salvage Scrap Yard is actually two businesses - an auto salvage business and a scrap business.
Washington Salvage Scrap Yard models include easy-to-build plastic kits like the main garage and office, as well as cast-resin ready-to-use scenery details like junk auto piles. Check out all of the Washington Salvage Scrap Yard
and related kits!
Great headquarters building for metal processors or industries handling scrap steel
Corrugated metal garage with brick office annex
Great for use as a maintenance garage for railroad or industrial vehicles
Easy-to-build plastic kit
Molded in appropriate base colors
Main Building: 8-3/8 x 9-1/4 x 3-1/2inch (21.2 x 23.4 x 8.8cm)
Scale: 8-5/8 x 1-7/8inch (21.9 x 4.7cm)
HO Code 100 Curved Double Radius Turnout - Streamline- Left Hand, Electrofrog
Nominal radius - outside: 60In (1524mm), inside 30In (762mm); length: 10-5/32In (256mm).
HO Signal - Hooded Modern (Double Head-Right)
1/16 inch OD Round Stainless Steel Rods - 22 Gauge x 12inch Long
Round Stainless Steel Rods - Not hollow (2 pcs)
Outside Diameter: 1/16 inch
Plastruct 90482 HO ABS Stair Rail (2pcs pkg)
SCALE
HO
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
27/64
HEIGHT IN MM
10.7mm
WIDTH IN INCHES
3/4
WIDTH IN MM
19.1mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
6
LENGTH IN MM
150mm
USE DESCRIPTION
ABS STAIR RAIL Use for hand rails on stairways. Precision Injection Molded in Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is critical.
Kenworth T680 Sleeper-Cab Tractor - 53ft Dry Van Trailer - Con-Way Truckload
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
Models depict in-service locomotives from the mid-1990s and beyond.
Road name and road number-specific painting and lettering.
Multiple road numbers offered.
New and improved high-torque motor and drive mechanism guarantees smooth operation.**
Operating radiator fans. Improved radiator fan drive unit with quieter operation and selective fan control.**
All-wheel power pickup and all-axle drive.
Heavy die-cast, zinc alloy chassis.
AuroraJanney scale head replica couplers installed.
NMRA RP-25 wheel contour with Code 110 tread width.
Minimum radius: 18? (recommended 22?)
* Lighting functionality is limited on DC models operating on DC track power.
** Improvement over our previously-released HO scale SD60F.
DC Version Features:
DCC ready with 21MTC connector.
Dual sugar-cube speakers (functional after installation of a DCC sound decoder).
Operates on DC track.
N Scale AutoFlood III RD Coal Hopper - UP/CMO #504360
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO - 24Ft Ribbed Ore Car w/Load - B&LE #20620
Detailed Information
MODEL FEATURES:
Removable load
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied brake wheel
Machined metal wheels
Weighted for trouble free operation
Solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 15inch
PROTOTYPE AND BACKGROUND INFO:
Iron ore is a rock from which metallic iron can be extracted. About 98percent of the mined iron ore is used to make steel. Many railroads around the great lakes have unit trains that transport mined iron ore to transport via barge for processing. These trains are very distinctive with train sets of small cars carrying very heavy loads of dense iron ore.
F30A 50Ft Flat Car: Penn Central #702058
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
AK Interactive 67 DAK Vehicle Streaking Grime Enamel Paint 35mL
Enamel type streaking for modelling.
Grimy grey colored effect ideally suited for creating streaks of dirt over sand and light colored surfaces. Also suitable for other effects such as add chromatic richness to any piece or surface.
Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moistened in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.
HO Code 100 Streamline Large Radius Left, Electrofrog
Nominal radius 1524mm, angle 12 degrees, length 258mm
HO Peterbilt 389 Sleeper Cab Tractor w/Pneumatic Bulk Trailer - Green, Black, Purple, Chrome
HO Steam Engine Bell w/Bracket (Brass Casting) - Old Style w/Ball Top (Rigid)
HO Procor 3000CuFt Aluminum Hopper w/Handrails - UNPX/ Procor Wordmark #127248
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
N Scale Code 55 - Metal Rail Joiners (24pk)
Atlas - N Scale GP-9 TT - Gold DCC Sound - Wabash #495
Features:
Powered low friction drive
Blackened metal wheels
Dual brass flywheels
Directional lighting
Golden-white LEDs
AccuMate couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
AccuMate couplers are made under license from AccuRail, Inc
HO 20K Gallon Acid Tank Car - UCLX #30082
Era: 1991-2009, 2010-Present Day
MODEL FEATURES:
- Multiple road numbers
- Many separately-applied details
- Etched metal walkways
- Different top platforms as appropriate per prototype
- Different brake systems as appropriate per prototype
- Separate wire grabs and handrails
- Trucks with animated rotating bearing caps
- Minimum radius: 18 inches
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Body-mounted, McHenry scale double-shelf knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod
details
- Machined metal wheels with RP25 contours operate on all popular brands of track
HO EMD E8A w/HEP - DC/DCC/Sound - Conrail (OCS) #4020
The Rapido Trains HO scale Conrail OCS E-unit locomotive features:
HEP muffler for 4020-4021 and steam generator details for 4022
Dynamic brake options where appropriate
Sealed, twin-beam headlight configuration
Modified pilots
Correct side grilles
Rebuilt blanked sides (portholes removed) in two variations
Non-skirted fuel tanks
Three chime RS3L and Hancock air whistle air horns included
Hyatt roller bearing journal covers
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Accurate E8 sounds provided by ESU LokSound
Complete lighting effects headlights, class lights, backup lights, ground lights, cab lights, Stratolite or beacons and more. -Not all lighting features will work in DC mode.
Optional user-installed ditch lights.
HO 40Ft Wood Reefer - UTRX #11633
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - SOO Line #136004
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Diesel Detail Kit - For EMD GP9 Phase II
Make your Walthers Mainline HO locos even more realistic in minutes with this Diesel Detail Kit! The complete set of grab irons fits the standard locations on the model, and they are made of durable, factory-formed stainless steel wire, with illustrated instructions included. Designed especially for the Walthers Mainline EMD GP9 Phase II (sometimes known as the Phase 2) 910-20402 series with ESU Sound for DCC or DC operation or 910-14000 series Standard DC locos, this 30-piece set has all standard grab irons and lift rings to do one unit including:
13 Drop-style grab irons
1 Straight grab iron
2 long pilot grab bars for early high hood units
14 photo-etched lift rings
Weathering Powder 1oz (29.6ml) - Dusty Brown
White Pass & Yukon In Color By Kevin J. Holland
Release: July 1, 2016
Kevin J. Holland
North Americas most remote railroad is examined in all its beauty and unique operation.
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504956
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
HO Modern Steel and Concrete Highway Overpass with Pipe Railings
Modernize your HO streets and highways with the Cornerstone Modern Steel and Concrete Highway Overpass with Pipe Railings kit! Packed with authentic detail and designed for easy construction, the prototypes are typically found along lower speed routes with pedestrian and bicycle access as well as along scenic areas. Other features include:
Typical of pre-stressed concrete highway overpasses seen all across North America
Fits highway scenes from the 1960s to the present
Round and Square Support Columns included in short and tall styles to clear railroad or highway below
Build as single or double span - easily combine kits (each sold separately) for a larger assembly
Easy to install in new or existing layout scenes
Detailed abutments with molded cut lines for easy customizing
Parts molded in concrete gray
12-15/16 x 6-1/4in
HO MP15DC Gold - DCC & Sound w/ Ditch Lights - Norfolk Southern #2380
Features:
Three different hood styles (angled air filter box, square air filter box, standard hood)
Exhaust stacks: with or without muffler
Long hood sand fill: recessed or extended
Rear sand fill: Three variations of sand boxes behind cab
Pilot: standard or with snow plow
Additional Features:
Separately-applied scale detail parts include: windshield wipers, metal grab irons, coupler cut levers, multiple-unit hoses, snow plow, train line hoses, fine scale handrails, and more!
See through step detail on sill
Etched metal radiator grilles
Painted crew members
Factory-equipped with AccuMate knuckle couplers
Coupler pocket designed to accept AccuMate Proto-couplers
Five-pole skewed armature motor w/ dual flywheels for optimum performance at all speeds
Directional lighting with golden-white LEDs
Atlas Master Series Gold Features:
ESU LokSound decoder, supporting all DCC programming modes.
Flexible mapping of function keys F0 to F31.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor and more.
Plastruct 90481 N ABS Stair Rail (2pcs pkg)
SCALE
N
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/4
HEIGHT IN MM
6.4mm
WIDTH IN INCHES
7/16
WIDTH IN MM
11.1mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
3-5/8
LENGTH IN MM
90mm
USE DESCRIPTION
ABS STAIR RAIL Use for hand rails on stairways. Precision Injection Molded in Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is critical. High impact character
Tsunami2 Digital Sound Decoder - 21-Pin NEM form factor - EMD Diesel Locomotives
Dimensions: 30.5 x 15.5 x 6.5mm
Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output)
Function Outputs: 8
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
The NEW TSU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more!
The TSU-21PNEM8 can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches.
HO Master MP-36 - DCC/Sound - MBTA #010
Features:
- Golden-white LEDs
- Realistic die-cast underframe
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Realistic lighting effects including ditch lights and in-cab light
- Metal knuckle couplers
- Detailed cab interior
- Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
- Coupler cut levers
- Multiple unit hoses and trainline hoses
- Recommended 22 inch radius with Atlas passenger cars
DCC Ready Units:
- Equipped with a speaker for easy conversion to sound with the addition of a decoder.
DCC ESU LokSound Functionality Features:
- Over 20 sound effects are available including Head-end Power (HEP), engine start-up and shutdown, prime mover sounds through all eight
notches, bell, air horn, air compressor, dynamic brakes and more.
- There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
Atlas HO Scale EMD GP38, Gold Series- With ESU LokSound DCC, Norfolk Southern #5634
Atlas Item #: 10003242
MODEL FEATURES:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional features included but not installed (GP-40s only)
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
SOUND & DCC FEATURES FOR GOLD SERIES:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
Prototype Overview:
In 1966 EMD introduced a new line of locomotives based on the 16-cylinder 645-series prime mover. The
40-series included a six-axle and four-axle model, the latter being the GP40. A total of 1,145 units were
produced between 1966 and 1972. These turbocharged 3,000hp locomotives were used primarily in road
freight service. The GP40 was a versatile locomotive that could be found across the US hauling drag freights
over mountain passes and leading high-speed intermodal trains across flat terrain. Three rooftop radiator fans
at the rear of the long hood differentiate a GP40 from its lower horsepower counterpart, the GP38, which has
two fans at this location.
Concurrent with GP40 production, EMD offered a lower horsepower, non-turbocharged locomotive based on the
same 645-series prime mover. The four-axle GP38 was rated at 2,000 hp and had the advantage of costing less
than the GP40. A total of 727 units were produced between 1966 and 1971 when the model was superseded.
The wheelbase of the GP38 was identical to that of the GP40. Both units shared the same EMD road-switcher
style body that was introduced with the GP35 in 1963. A desire for standardization caused the GP38 to share
the same wheelbase, frame and many external components as the GP40. The GP38 was purchased by large and
small roads alike. It was routinely found in local and road freight service throughout the US. Many GP38s and
40s are still in service today, either having been rebuilt or modified. A locomotive that has withstood the test of
time.
Many options exist on the Atlas GP38 and GP40 models. Some of these are: Long hood with or without dynamic
brakes, multiple fuel tanks, high or shoot hoods, and more.
N Scale ACF 4600 3-Bay Covered Hopper - DT&I #10333
MODEL FEATURES:
- Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
- Round or trough hatches
- Photo-etched metal roofwalk
- Separately applied wire grab irons and stirrup steps
- Detailed outlets
- Multiple roadnumbers
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed
- Highly-detailed, injection molded body
- Separately applied brake wheel
- Screw mounted trucks
- 100-ton trucks with 36 inch machined metal wheels
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Minimum radius: 9-3/4 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO 4700 Covered Hopper - Conrail (959H Repaint 1976) #886421
Truck: Tangent 100-ton Barber S-2 trucks with rotating bearing caps
Wheels: CNC-Machined 36 inch wheels
Conrail (CR) 959H Repaint 1976 illustrates Despatch Shops Incorporateds take on the GATC 4700 design. DSI built 400 Lot 959-H clones in 1965 that share the GATC look except for one major feature: DSI applied a welded roof vs. the standard GATC ribbed roof. Yes, Tangent duplicated this feature with a specific DSI roof for the Lot 959-H, including the DSI weld and rivet detail. This model replicates ex-NYC cars that have received 1976 Conrail oxide paint. Conrail continued to use these interior-lined cars in grain service and fitted the cars with Keystone Portloc gravity gates. This CR model inherits its former-NYC details including the high-mount brake gear and Morton brake step. The cars also kept their high-mount retainer. All those little Conrail paint details are present, like the accurate early CONRAIL under the logo, accurate CR ACI label, and accurate ex-NYC number stencils on the top right of the car side. Of course, Tangent applied white road numbers to the black 100-ton Barber S-2 trucks, matching Conrail prototype practice.
HO EMD GP40 - DCC Ready - MKT (Green & Yellow) #227
1982+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Fine Red Sable Brush - Size 3
Scenic Accents Glue - 1.25oz (37mL)
Specially formulated to attach Scenic Accents or any type of figure or detail to a layout or diorama. Figures can be positioned without waiting for glue to dry. And since it stays tacky, they can be placed in one position, picked up and moved to another without regluing at any time. Accent Glue leaves no puddles or residue. Its water-soluble and a small brush applicator is included.
Tap 00-90 and Drills #62 & #56
Hand Tap and Drill Set made from High Speed Steel. Hand Taps are the versatile, and are popular for use in taping holes for the hobby industry and general tapping. Bottoming Taps are useful for threading blind holes. A bottoming tap has almost no taper at the end because it is designed to thread all the way to the bottom of its reach.
The #1059 Tap and Drill Set is used for installing 00-90 screws.
Package Includes:
(1) 00-90 Tap (bottoming style)
(1) #62 Tap Drill
(1) #56 Clearance Drill
WARNING: Cutting tools may shatter when broken. An approved form of eye protection is strongly recommended.
HO PS4750 Covered Hopper - SOO Line (Original 1-1980) #75461
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
SOO -Original 1-1980- brings back a popular PS4750 paint scheme. We offered a different 1979 group of SOO cars about 8 years ago (!) and ever since, our mailbox has been full of requests for MORE SOO. We are very pleased to finally offer another SOO lot, this time from the 400-car 1980 Pullman group. These covered hoppers feature truck mounted brake beams, a side-mount train air line and scale-sized Miner -Selflok- outlet gates. Painted in that special shade of -Soo Line White- (Soo modelers know exactly what we mean), the models show off the classic yellow wheat stalk graphics and green SOO LINE roadname. An accurate and critical car for SOO and CP Rail modelers and lovers of the PS4750 everywhere, these cars continue to serve in grain and in buffer car services.
HO GP40-2 Diesel - DCC & Sound - Seaboard System #6608
SBD FEATURES:
- Ex-SCL and Ex-L&N
- Nose headlight
- 5-Chime horn
- Fire cracker antenna
- No plow
- All-new artwork provided by noted SBD railroad experts
ROAD NUMBER SPECIFIC FEATURES:
#1640
- Early phase
- Ex-SCL
- Chicken wire grilles
- 3200 Gal fuel tank
#6608
- Mid/Late Phase
- Ex-L&N
- Q-fans
- corrugated grilles
- 3800 Gal fuel tank
- exhaust silencer
- front anti-climber
#6615
- Mid/Late Phase
- Ex-L&N
- Q-fans
- corrugated grilles
- 3800 Gal fuel tank
- exhaust silencer
- front anti-climber
GP40-2 LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18 inches
SOUND-EQUPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO 60Ft Gunderson 7550 Double Door Boxcar - TTX #664059
MASTER MODEL FEATURES:
All New Tooling!
Separate ladders, hand brake and door rods
Door stirrup, unique to the 7538
Single or double plug door as per the prototype
Roof with 3 Stanray X-panels and 3 diagonal center panels
Brake arrangement offset to A end of body
Crisp, accurate lettering and paint details
N Scale ACF 3560 Center-Flow Covered Hopper - Cancarb ACFX #74080
Features:
Prototypical painting and lettering
Plastic body with die cast chasis
Removable coal load
Product Information
The Atlas Trainman ACF 3560 Center-Flow Covered Hopper is based on common steel cars used by many railroads for handling potash, fertilizers, chemicals and more. It features an injection-molded body with applied plastic details where appropriate, smooth paint, crisp lettering and AccuMate(R) knuckle couplers.
HO 40Ft Smooth Side Containers - SeaLand SEAU #2 (3pkg)
MODEL FEATURES:
Fully assembled
Easily stackable
Each container is individually numbered
O Scale - 81ft Great Lakes Freighter MV White Swan - Resin Cast Kit
NOW AVAILABLE IN O SCALE!!
20-1/2 inches long
Waterline resin model kit.
81ft wooden Great Lakes motor vessel
Built in 1922
Wrecked in 1956
Typical of small Great Lakes wooden ships from 1880s to 1940s
Kit includes all details needed to build a complete model!
Thru Girder Bridge 100 Ft Single Track
Injection molded, pre-colored, high impact styrene kit.
Multiple kits can be combined to build a custom bridge of any length.
Superb detail includes lateral bracing, crossbeams, stringers, and rivet plates, all with extensive rivet detail. Bridge can be modeled with square or rounded girder ends.
Parts included allow bridge to be built with an open or ballasted deck.
HO Code 83 Bridge Flex-Trak is included.
Bridge is a scale 100 Ft long by 28 Ft high to the rail tops. The double track bridge has 17 Ft track centers.
HO 53ft GSC Flatcar - Conrail #715556
FEATURES:
- One-time run of these car numbers, limited quantity available, order now!
- Now with die cast metal body for excellent performance empty or loaded
- Prototypes in service from 1950s to early 2000s - some in work train service today
- Used to carry all kinds of cargo including machinery, lumber, steel shapes, rail and various building materials
- Fully assembled with finely detailed body and deck
- Correct 33 inch RP-25 metal wheelsets
- Proto MA(TM) metal knuckle couplers
HO GMD-1 - DC/Silent - Canadian National (1900s Green) #1912
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
HO Standards Gauge
Designed and developed by the NMRA (National Model Railroad Association) Engineering committee, this pocket sized gauge enables you to check all important dimensions on your track and rolling stock as follows:
Gauge of track and turnouts
Flangeway depth and -check gauge-
Clearance
Height of loading platform
If cars do not run correctly, this gauge will help you pinpoint the trouble. Complete instructions come with each gauge
Bi-Level Auto Racks - BNSF Brown - Circle Cross Logo #300160
All are Ready-to-Run.
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene-
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage.
HO Scale NSC 73Ft Centerbeam Flatcar - BNSF (6pkg)
Road Numbers:
562878, 562935, 562960, 563003, 563114, 563181
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
1-72 Nylon Round Head Machine Screws (12pk) - 1/4 x .073 inch
Walthers Nylon Round Head Machine Screws are perfect for your models and for any other model or device that needs miniature insulating screws. Walthers hardware offers matching nuts, as well as washers, hex wrenches, taps and other miniature hardware and tools in standard small sizes. Nylon Round Head Machine Screws are part of the selection of Walthers miniature hardware and tools. Machine and wood screws may be brass or brass plated.
Tangent Scale Models HO PS4750 Covered Hopper ROCK -Delivery Blue 6-1978
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ROCK -Delivery Blue 6-1978- is available in the Blue Original 1978 scheme. Our -R- black and white logo and blue color is stunningly executed, check it out for yourself. ROCK lettering done right is something to behold, with accurate data stencil breaks and careful duplication of ROCKs data style. This is Tangent-accurate hand-drawn artwork. We have also matched the 1978 ROCK details including body-mounted brake center sill linkage, Miner outlet gates, a Universal hand brake and matching Universal brake wheel.
Juneco Scale Models Back Up Light - DDGM Pyle Double Vertical w/jewels, plastic (2/pkg)
HO 50ft Evans Cushion Coil Car - New York Central/P&LE #42193
Designed to speed loading and unloading while protecting large steel coils in transit, the Walthers Proto(R) 50ft Evans Cushion Coil Car is a great way to add steel traffic to any HO layout. These cars feature updated tooling with removable angled, round or glass fiber hoods.
Additional features include:
- One time run of these road numbers, limited quantity available - order now!
- Based on cars in service 1970s to early 2000s
- Prototypes carry larger steel coils used to make automobiles, appliances and food packaging
- Matching, removable hoods in angled, round and glass fiber styles with lifting and stacking brackets
- Fully assembled with etched metal walkways, grab irons, underframe cushioning device, separate brake gear, and more!
- Detailed body with V-shaped load cradle and separate restraints
- Heavy die-cast metal frame for enhanced performance
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Detail your new coil cars in minutes with the Cornerstone Steel Coil Load (#933-1499), sold separately)
- Great for use with Walthers Steel and Auto Industry Series!
Plastruct 91250 Clear Copoly Sheet .010 (3pcs pkg)
.010 CLEAR PLASTIC SHEET
An excellent clear plastic with many uses.
Copolyester is tougher and less prone to split or shatter than Acrylic or Styrene, and is resistent to stress whitening.???? Can be cut with scissors, knife or sawn without burning.?? Glues well to itself, but when gluing to most other plastics an industrial grade Cyanoacrylate Glue is recommended.?? Precision Extruded.
AK Interactive Heavy Chipping Acrylic Fluid
Odorless fluid to create heavy chipping effects
Odorless acrylic fluid to create Scratches Effects.
Odorless and effective acrylic product to replace hairspray and to do effects of wear and scratches on our models. First we paint our model with a dark color or the color that we want to see under the scratches. Afterwards, we can apply directly from an airbrush giving a generous coat to our model. Afterwards, using an acrylic paint, we can make small damage effects. Dampen the surface using a brush and then do the effects using a sharp tool or the same brush. Don’t gamble with any old lacquer and be confident of the result on your model with this new product.
AK product is the original and first in the market
Spray Can - Deep Metallic Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO One-Piece Brick Smokestack - Assembled (2pk)
DIMENSIONS:
1-1/4 x 10-1/4 inches (3.2 x 25.7cm)
Detail any industry along your railroad with the Walthers Cornerstone HO scale one-piece brick smokestack. Great for steam-era and transition-era scenes, many still stand today. Perfect for upgrading other kits or completing scratch-building or kit-bashing projects, One-piece brick smokestacks feature finer brick detail and are molded in one piece so there is no assembly necessary and no seem to hide. Package includes two one-piece brick smokestacks. One-piece brick smokestacks can be used with many Cornerstone HO scale industry kits.
- Realistic brickwork
- Molded in appropriate color
HO RTR 50Ft PS-1 Boxcar - Missouri Kansas Texas (MKT) #90135
Product Information
This ready-to-run Pullman-Standard PS-1 50ft Boxcar with 8ft 6 Panel Door from Kadee features fine detailing, roadname-appropriate details, accurate paint and lettering, correct trucks with metal wheels and scale-sized Magne-Matic couplers.
Tangent Scale Models HO Greenville 86ft Boxcar CSX
CSX -Repaint 1991+ leads off this release, offering examples of repaints from B&Os first order of cars in 1969. Applying CSX paint to a Tangent replica is not a walk in the park ? It is all about the big AND little details. This car features the large CSX logo on the center of the sides and accurate Ease up! stickers on the corners. Apparently, the more the better, since CSX also applied tiny Ease up! stickers on each door. Yes, we have faithfully reproduced this extraordinarily small detail. Get out your magnifying glass if you want to read the CSX Quality Check oval sticker applied above the COTS by Grand Rapids employees. This Greenville car features Morton style crossover platforms, an Ajax hand brake housing, accurate End-of-Car Cushioning details with truck mounted brake hardware, and 70-Ton Barber S-2 Trucks with 33in wheels and accurate Timken roller bearing caps. Check out the CSX-specific modern features in this release, including the large tack board mounting location on the door and the single and double third arms on the top door tracks. We are now offering CSX in six different numbers!
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
HO Ready Made Realistic Trees Value Pack - Deciduous Mixed Green 3/4 - 2inch 1.8-5cm pkg(38)
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors.
HO 5820 Covered Hopper - Procor/UNPX (No Procor Logo) #123596
Era: 1988+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
Dark Green
Mix and match with other foliage to model medium to model large ground covers, create variation in trees, shrubs, bushes and landscape hillsides. Available in five colors and a fall mix. Use for all scales, colorfast and blends naturally with other foliage. Attach to Tree Armatures with Hob-e-Tac. Attach to layout with Scenic Glue. Purchase the Scenery Manual for additional information about how to use the Landscape System.
Particle size is approximately 1/8inch - 1 1/2inch (3 mm - 3.81 mm)
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Weyerhaeuser #1109
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 60ft NSC 5150 3-Bay Covered Hopper - Archer-Daniels-Midland (ADMX) #52333
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Scale Santa Fe Refrigerator Car -El Capitan #34844
RR27 CLM
N Scale 50ft FMC Combo Door Boxcar - Railbox/ABOX #51952
Era: 2010-Present Day
MODEL FEATURES:
- Screw mounted, Roller bearing style trucks
- Scale profile brake wheel
- Accurately painted and printed for prototypical realism
- Body-mounted, McHenry operating scale knuckle couplers
- Machined metal wheels operates on Code 55 and 80 rail
- Weighted for optimum performance
- Highly detailed, injection-molded body
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Canadian General Transit #8051
Date: NEW 8-32
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
Fox Valley Models N Bi-level Auto Rack
Southern
Features:
Die-cast underframe
Finely Molded Details
Etched Metal Panels
Formed Wire
Sharp Painting & Lettering
Multiple Road Numbers
Die-Cast Underframe
Metal Wheelsets
Micro-Trains Trucks & Couplers
HO RTR 85Ft General American G85 Flatcar - VTTX #300530
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24Inch
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Erie #79076
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO RTR 68Ft Bulkhead Flatcar - Canadian National CN #622415
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
HO 1961 Chrysler 300 Convertible - Top Down
(Mardi Gras Red)
HO RTR Thrall 5-Unit Rebuilt 40Ft Well Car - Santa Fe Leasing/SFLC #1006 A-E
(yellow, black, yellow conspicuity stripes)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft on both single and five-unit cars. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers - limited quantiuty, order now!
100- and 70-ton roller bearing trucks
Correct 36inch and 33inch RP-25 turned metal wheelsets
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
Proto MAX(TM) metal knuckle couplers
HO GMD SD40-2 - DCC Ready - CP Rail: As Delivered #5789
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO Track-Bed - 24ft Continuous Roll
Track-Bed Roll offers a smooth application. It deadens sound, requires no pre-soaking like cork, remains flexible and will not dry out or become brittle! Aligns well with cork or Homasote applications.
Install easily with Foam Tack Glue (PN: 1444). Pin in place with Foam Nails (PN: 1432).
1 roll/pkg - 3/16 inch depth x 1-3/4 inches wide x 24 feet long
HO MLW M420 MR20c - DC/DCC Ready - Canadian National (Stripes) #3579
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO Jersey Barriers - 24 Sections
Make HO highways safer in minutes with these layout-ready Jersey Barriers from SceneMaster. A great detail for busy streets from the 1960s to the present, they are also perfect for restricting and directing traffic at construction sites, industrial areas, closed railroad crossings, and at intermodal and military facilites. The set includes 24 layout-ready barriers, molded in concrete gray.
Model Features:
- Scaled from field measurements & diagrams of a GO F59PH
- End metal handrails with plastic stanchions
- Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
- All-metal etched grilles
- Full cab interior
- Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
- Operating headlights, rear light, and ditch lights
- GO units feature functioning tri-color class lights (white, green and red)
- American units feature functioning red marker lights
- Accurate sounds recorded from a GM 12-710G3A
- DCC/Sound units come equipped with an ESU LokSound decoder
HO Scale H1b Hudson Steam - DCC & Sound - Canadian Pacific (Spans the World) #2814
-Late walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
N Scale PS 4427 Covered Hopper - Milwaukee MILW (3pkg)
MODEL FEATURES:
- Body-mounted McHenry knuckle spring couplers installed
- Screw mounted trucks for accurate tracking
- Roller bearing trucks
- 36 inch machined metal wheels and RP25 contours
- Operates on Code 55 and 80 rail
- Weighted for optimum performance
- Packed in a jewel box for great display and storage opportunities
- Razor sharp painting and printing
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
HO RTR 40Ft Single-Door Steel Boxcar - Delaware & Hudson (Bridge Line Logo) #19691
(yellow, blue)
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. Check out the entire line of Bowser HO Scale ready-to-run boxcars.
Evergreen Scale Models - Opaque White Polystyrene I-Beam .100In x 14In (4 pcs pkg)
Tru Color Paint - Acrylic - Graphite - 1oz
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.188 (9pcs pkg)
Scenic Sprayer
Comes with a long siphon tube and spray head that fits the Scenic Cement bottle. Nozzle is adjustable from a mist to a steady stream. May be used for Scenic Cement, Earth Colors Liquid Pigment and other liquids. Made of safe, durable plastic.
HO 50ft PS 5344 Boxcar - GTRA #2055
MODEL FEATURES:
-Decorated models fully-assembled and ready to run out of the box
-Highly-detailed, injection-molded body
-Separately applied wire grab irons
-Separately applied brake wheel and end ladders
-Etched end platforms
-Machined metal wheels
-Weighted for trouble free operation
-33in solid nickel silver wheels with RP25 contours operate on all popular brands of track
-Body mounted McHenry operating scale knuckle couplers
-Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
-Replacement parts available
-Minimum radius: 18in
PRIMED FOR GRIME MODELS FEATURE:
-Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
-Faded base colors matched to the prototype
-Patches applied and shaped per road number matching each corresponding side to the prototype
-Perfect starting point for adding grime and rust
PROTOTYPE AND BACKGROUND INFO:
It was the mid 1970s, and the incentive per diem box car boom was just beginning. New, brightly painted box cars seemed to appear overnight. Many were lettered for various short lines. Pullman Standard (PS) was a significant builder of many of these cars. The 50ft outside post, non-terminating end box car, became the foundation for new per diem cars built in the 1970s. The 50ft PS cars also varied in door configuration and style to better suit each customer.
Today box cars still matter to the railroads. Even with modern containerization, box cars have a higher capacity then allowable on US roads. We are finding today, that 1970s box cars are being rebuilt and put into service for various leasing outfits. These models can still be seen today in the modern railroading scene.
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian National #621346
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Scale - 50/56 Mack LH S/A Tractor- Unpainted and Resin Cast Kit
HO RTR 70 Ton 2 Ballast Hopper w/ Side Chutes - ATSF #177158
Blt. 5-57
Product Information
Perfect for work train service on our railroad, Bowser HO Scale ready-to-run 70-Ton 2-Bay Ballast Hoppers with Side Chutes (Ballast Gates) feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make these 70-Ton Ballast Hoppers welcome additions to any diesel-era freight train consist.
Soundtraxx 810162- Mini Cube 3 Oval Speaker-Baffle Kit
Soundtraxxs newest speaker is the Mini Cube 3. The Mini Cube 3 is only 12 x 5.5 x 3mm, but the sound it produces will blow your mind!
Dimensions: 12.5 x 5.5 x 3mm(D)
Frequency Response: 800Hz - 20kHz
Power: 0.3 Watts (Nominal) 0.5 Watts (Peak)
Impedance: 8 Ohms
HO Scale NSC 73Ft Centerbeam Flatcar - Canadian National #623285
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
N Scale 48ft Rib-Side Container - APC #481713
These 48ft rib-side containers are aluminum with red vertical band and large Red Eagle logo on both sides. At 48ft in length, these containers are commonly seen filling the space in the bottom position of intermodal well-cars, with equal-length or longer containers above them. Now branded American President Lines, APL operates container ships, and intermodal rail and truck services around the world.
1955-56 GMC 1/2 Ton Suburban School Bus - Unpainted and Resin Cast Kit
Evans X72 Box car: Conrail w/ Small Logo - Single Car #229401
Detail Variations:
As operated between 1976 to the 1990s.
6-pack includes the following numbers:
#229077
#229291
#229301
#229398
#229401
#229472
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
HO Rotary Snowplow & F7B Locomotive - DCC Ready - Burlington Northern BNSF #972561/#972577
ROTARY SNOWPLOW FEATURES:
Electrically driven motor to operate the rotary blades
Clear plastic cab and/or portal windows
McHenry operating scale knuckle couplers on rear of the snowplow
Highly-detailed, injection-molded body
Fully-assembled and ready-to-run out of the box
Painted and printed for realistic decoration
Highly-detailed, injection-molded body
Minimum radius: 18inch
Recommended radius: 22inch
F7B LOCOMOTIVE FEATURES:
5-pole motor with precision-machined flywheels and multi-link drive train for trouble-free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Heavy die-cast frame for greater traction and more pulling power
Clear plastic portal windows
McHenry operating scale knuckle couplers
DCC Ready 21 pin plug
Machined metal wheels with RP25 contours
Fully-assembled and ready-to-run out of the box
Painted and printed for realistic decoration
Highly-detailed, injection-molded body
Minimum radius: 18inch
Recommended radius: 22inch
Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- SP -B-70-54 Delivery 2-1970
Product: Greenville 86′ Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Southern Pacific: This B-70-54 group covers SPs first order of quad door cars that were part of the GM Stamping Pool out of Cleveland, Ohio on the B&O. The scheme, of course, is simply one of the coolest paint jobs ever applied to a Greenville 86ft boxcar. Hold this car in your hand to appreciate the nuanced differences between white stenciling and SP Lettering Gray stenciling. From the huge dark gray arrows pointing to the centered SP logo, to the smallest black door handle detail, it?s all there. The SP cars feature their as-built 1970 appearance that includes Apex crossover platforms, a Universal hand brake housing (with separate long handle!) and a Universal brake wheel. SP ordered their cars with Center-Of-Car cushioning, and we have duplicated this setup, with a complete COCC underframe and draft gear. 70-Ton Trucks with 33in wheels and rotating Timken roller bearing caps finish off this replica. These SP replicas are Ready-To-Operate in eight numbers!
N Scale Wide-Vision Caboose - Rock Island #17004
The Rapido Trains N scale Wide Vision Caboose features:
Super-detailed underbody including all separate air and brake piping
Free rolling Barber-Bettendorf caboose trucks
Detailed interior
Full end detail, including uncoupling levers
Separate metal grab irons installed at the factory
Interior Battery powered lighting and operating end marker lights
Optional roof mounted air conditioner
Knuckle Couplers mounted at the correct height
Optional fuel oil tank details (Road name dependent)
HO GMD SD40-2W - DCC & Sound - CN (Non Dynamic Sergeant Stripes) #5360
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. DCC with Sound version features LokSound V5 decoder.
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
HO USRA Single-Sheathed Boxcar: RF&P
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Snapper Switch Machine Power Supply
Solid state, provides positive power to dual-coil switch machines. Protects from burnout due to stuck pushbuttons, short circuits, etc. Operates off accessory terminals of power pack or transformer up to 25V. 24V input can activate 5 to 10 coils simultaneously if connected to same control. Instant recycle time. Includes a section of Printed Circuit Mounting Track (PCMT).
HO 50ft Evans Cushion Coil Car - DT&I #1156
Designed to speed loading and unloading while protecting large steel coils in transit, the Walthers Proto(R) 50ft Evans Cushion Coil Car is a great way to add steel traffic to any HO layout. These cars feature updated tooling with removable angled, round or glass fiber hoods.
Additional features include:
- One time run of these road numbers, limited quantity available - order now!
- Based on cars in service 1970s to early 2000s
- Prototypes carry larger steel coils used to make automobiles, appliances and food packaging
- Matching, removable hoods in angled, round and glass fiber styles with lifting and stacking brackets
- Fully assembled with etched metal walkways, grab irons, underframe cushioning device, separate brake gear, and more!
- Detailed body with V-shaped load cradle and separate restraints
- Heavy die-cast metal frame for enhanced performance
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Detail your new coil cars in minutes with the Cornerstone Steel Coil Load (#933-1499), sold separately)
- Great for use with Walthers Steel and Auto Industry Series!
HO F89-F Bi-Level Auto Rack - Northern Pacific/BTTX #913604
Detailed Information
MODEL FEATURES:
Die-cast underframe
Authentic undulating safety railing
Accurate Whitehead and Kales Auto Rack
Early or late train lines and cut levers per prototype and era
Customer installed end bridge plates (included in box where applicable)
Detailed deck
Wire-formed brake plumbing
Separately applied hand brake per prototype
Separately applied wire grab irons where applicable
Prototypical ride height
70-Ton roller bearing trucks with animated rotating bearing caps installed
Trucks with animated rotating bearing caps
Minimum radius: 22inch - Recommended radius: 24+inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
N Scale 60ft Coach Car - New York Central #1894
FEATURES:
- Based upon C&NW and CNJ prototypes
- Full scale dimensions and details
- All cars include separately applied window glazing, diaphragms and roof vents
- Observation car includes separately applied end railing details and a drumhead
- Detailed interiors (excluding baggage car)
- AccuMate operating knuckle couplers
Flat Brushable Acrylic - Rusted Umber - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
HO - DW Rerailer - Brass 1 Left & 1 Right
HO Scale H1b Hudson Steam - DCC & Sound - Canadian Pacific (Beaver Shield) No #
-Late walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO Galvanized Culvert Pipe - 24 Inches (4pk)
Specifications
Scale: HO (1:87)
Sizes: 0.28 inch
Length: 3.4 inches
Galvanized steel culvert pipes have been around for over a century and serve many purposes from storm sewers to drain pipe and even irrigation. Found where roads or railroads cross low lying areas, streams, or other waterways, these galvanized pipes provide a pathway for water to flow while reducing erosion at these critical crossings.
Suitable for any era, these galvanized culvert pipes will look right at home on your layout. Each HO-scale pipe section is 25 scale feet long and comes in a variety of diameters, suitable for many different applications. Hollow throughout, each pipe features realistic corrugations both inside and out.
HO PA-2 + PB-2 Demonstrator Set - DCC Ready - Alco-General Electric #8375
The 2nd Run ALCO PA and PB Features:
Photo courtesy of NHRTHA
Correct nose and roof profiles 3D-scanned from the prototype
Loads of roadname-specific details
ATSF re-powered units feature unique roof blister and EMD style
fans
A units and A-B sets available
Dynamic or non-dynamic brake versions, where appropriate
Full underbody piping and conduit
Separate grab irons and handrails installed at the factory
Etched-metal grilles, where appropriate
Lit number boards
Full cab interior
Operating Gyralite or red Mars light, where appropriate
Rapidos proven drive system
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options
ESU LokSound V5 Decoder
HO High-Voltage Transmission Tower - Kit (4pkg)
Product Information
Walthers Cornerstone HO Scale High-Voltage Transmission Towers are based on typical steel -high tension- electrical power line supports used across the continent. These tall towers will add realism to your railroads skyline. The set includes four easy-to-build towers with molded-on eyelets for stringing wire (933-3344, sold separately). High-Voltage Transmission Towers are just part of the line of SceneMaster and Cornerstone HO Scale scenery details.
Includes parts for four towers
Great addition to 1950s and later scenes
Perfect in industrial or rural scenes
Parts molded in gray
Use alongside Modern High Voltage Transmission Tower Kit (933-3343 sold separately)
Easily detailed with High-Tension -Wire- (933-3344, sold separately)
Model a complete power grid with the Cornerstone Metro Power & Light (933-4052), Northern Light & Power Powerhouse (933-3021), Northern Light and Power Substation (933-3025), High-Voltage Transmission Tower (933-3121), SceneMaster Electric Utility Pole Set (949-4120) and assorted Utility Trucks (949-11636 to 11895), each sold separately
Each assembled High-Voltage Transmission Tower measures: 2-1/2 x 2-1/2 x 9-3/8inch (6.4 x 6.4 x 23.8cm)
OIF and OEF US (Sand) Modern Vehicles Streaking Effects - Enamel Paint - 35ml
The perfect color for a wash in modern US vehicles OIF and OEF. This Dirt color wash has been specifically suited for use over Modern US sand colored vehicles.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows. The excess of the wash can be easily removed with a clean brush and White Spirit.
RTR 57Ft trinity 3-unit Spine Car - TTRX/Faded Logo #360909
Expected time of arrival : April 2021
Primed for Grime
MODEL FEATURES:
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Precision die-cast metal spine structure
Etched metal walkways
Separately applied brake piping
Highly detailed customer applied trailer hitches
53Ft trailer and container are perfect loads for the 57Ft spine car
Fine ladder detail
Weighted for optimal performance
33Inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers installed
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Machined metal wheels
Minimum radius: 20Inch
PROTOTYPE AND BACKGROUND INFO:
Intermodal transportation requires specialized rail equipment which is, on occasion, too specialized. To allow more flexibility in loading containers and trailers at terminals all-purpose spine cars were developed. These cars can be configured to allow loading of trailers of varying lengths, from 28Ft pups to 53Ft high capacity units. With the trailer hitches collapsed containers can also be loaded. 40Ft, 45Ft 48Ft and 53Ft containers call all be accommodated on these cars as well as 20Ft models provided they are mounted to a chassis.
The prototype for our model is based on a Trinity-built car owned by the TTX Company. These 70-ton cars (TTX class RAF30A) numbered TTRX 360817-361116 first appeared on the rails in the late 1990s. The Athearn model is faithful to the prototype allowing modelers to load a variety of trailers and containers.
Specifications
PROTOTYPE MANUFACTURER: Trinity
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990s+
Safety and Security Posts pkg(20)
Prototypes increase driver awareness of obstacles
Added protection for everything from gas pumps to structure entrances
Ready to use - modernize a scene in minutes
20 posts molded in Safety Yellow
G2 Dash 9-44CW Diesel, DCC & Sound - BNSF Railway H1 #1050
ETA: July 2021
BNSF Railway FEATURES:
2010+ appearance for present day operations
Different art per era appropriate changes
Angled engine compartment hood profile
Early -tabbed- dynamic brake intake panels
Late style dynamic brake exhaust fascia
Modified hood section under exhaust
#1050 Primed for Grime with Heritage 1 body
colors and Heritage 2 logo on long hood
Delivered in 1996-97, this was the first (and only) order of BNSF Dash
9-44CWs to wear the GN-inspired -Heritage I- scheme. Many are still in
service today and can be seen on trains across the system. BNSF 1050 is
unique in that it received yellow BNSF initials on its long hood, as opposed to
the standard green initials.
DASH 9 SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Scaled from prototype resources including drawings, field
measurements, photographs, and more
Accurately –painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined
flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
BRAND NEW GENESIS 2.0 TOOLING!
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in
the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights on front trucks
Illuminated front and rear walkway lights
Illuminated class lights (where applicable)
Animated roller bearing caps
Kalmbach Publishing Book - Model Railroad Bridges and Trestles: Vol 2
Offers more tips for building bridges and trestles. New information and how-tos include modeling a highway underpass, creating a stone arch bridge and more. Learn how to use kits plus get scratch building tips. Ideal for all skill levels.
Coe Rail, Inc. #19303 (brown, white) - Ready to Run
Limited edition - one time run of these roadnumbers
Prototypically correct roof with both X and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
36 inches turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
N Scale Long Barrel Ore Hopper - CN Mineral Brown #646690
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO RTR ACF 4650 3-Bay Hopper - Penn Central #886821
Date: NEW 11-65
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
HO RTR SD39 - DCC & Sound - Southern Pacific #5316
Detailed Information
SP FEATURES:
By the end of the SP in the mid 90s, a small handful of SD39s were used around the LA area, known as -LA Basin Haulers-. They were used for heavy switching duties between Long Beach and West Colton, sometimes venturing off to other areas. Two of the numbers offered (5296 and 5298) were renumbered units to avoid conflict with similar numbered Rio Grande SD45s. They were assigned UP numbers, but were all retired before they could be renumbered. All 3 numbers feature unique faded paint and lettering effect per unit number, working beacon with DCC, large ballast boxes, removed gyralights, modified L-Window cab, rear brake wheel, roof mounted bell, large front plow, and P-3 horn.
ROAD NUMBER SPECIFIC FEATURES:
#5296
Ex SP 5315
hi-brake mounted trucks
early inertial grills
faded to red lettering effect
patched numbers
#5298
Ex SP 5317
hi/low brake mounted trucks
late inertial grills
faded white lettering effect
patched numbers
#5316
Still in its original number
hi-brake mounted trucks
late inertial grills
faded white to red lettering effect
SD39 SERIES LOCOMOTIVE FEATURES:
Separately applied air tanks
Coupler cut levers
Rubber MU hoses
Photo-etch stainless steel windshield wipers
Fine scale handrails
Non-sound version features 21-pin NEM DCC plug
See-through dynamic brake and radiator fans
Curved radiator fan grab iron
Exhaust stack
Frame-mounted bell (unless noted)
Detailed 4000 gallon fuel tank (unless different capacity is noted)
Flexicoil-C trucks with high or low brake cylinders (per prototype)
McHenry scale knuckle spring couplers
See-through cab windows
Bi-directional LED lighting
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Painted and printed for realistic decoration
Highly-detailed, injection molded body
Minimum radius: 18inch
Recommended radius: 22inch
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard Econami sound decoder by Soundtraxx
-Engine startup sound sequence
Dynamic brake sound or Non-Dynamic Straight to idle on F4
Extra prime mover and horn sounds exclusive to Athearn
Sounds recorded from a real EMD 12-645E3
Multiple bell sound files user configurable via Configuration Value (CV)
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Current Keeper ready with on board expansion plug
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via CV changes
Red
This medium-duty truck line was introduced in the late 1980s. Powered by a Navistar DT inline six-cylinder diesel engine capable of up to 350 horsepower, the 4900 series has been a great starting point for a wide range of commercial vehicles, including delivery vans, single- and dual-axle semi tractors, as well as fire apparatus and other government applications.
This heavy-duty rig is perfect for assignment to a firehouse in the industrial district of any HO scale city, and looks great parked with your collection too!
Each SceneMaster vehicle is a highly detailed replica, using diecast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
HO Dash 9-44CW - DCC Ready - UP/Ex-C&NW #9668
MODEL FEATURES:
Non-illuminated ditch lights
Three cab variations
See-through cab windows
Factory applied sunshades, frame-mounted bell, exhaust stack, brake wheel, rear sand filler, air tanks
Separately-applied wire grab irons
Fine scale handrails
Steerable or Hi-ad trucks with separate shock struts and brake cylinders per prototype
5,000 gallon fuel tank
McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run out of the box
Painted and printed for realistic decoration
Highly detailed, injection molded body
Quick Plug and play technology: DCC ready with both 8 and 9 pin connectors
Bi-directional constant lighting so headlight brightness remains consistent
Incandescent bulbs for realistic color and appearance
All-wheel drive with precision gears for smooth and quiet operation
Heavy die-cast frame for greater traction and more pulling power
All-wheel electrical pickup provides reliable current flow
5-pole skew wound motor with precision-machined flywheels and dual-link drive train for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Packaging interior safely holds the model for convenient storage
Minimum radius: 18inch
Recommended radius: 22inch
HO 60Ft Gunderson 7550 Double Door Boxcar - TTX #664444
MASTER MODEL FEATURES:
All New Tooling!
Separate ladders, hand brake and door rods
Door stirrup, unique to the 7538
Single or double plug door as per the prototype
Roof with 3 Stanray X-panels and 3 diagonal center panels
Brake arrangement offset to A end of body
Crisp, accurate lettering and paint details
N Scale Concrete Tie Double-Track Super-Elevated Curve - 45 Degrees, 11/12-3/8 inch Radius
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO ACF 2970 Covered Hopper - ACFX #44520
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons, stirrup steps and brake wheel
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Screw-mounted express-type trucks
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
Sterling Salt #49053
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO ACF 4600 3-Bay Centerflow Hopper - Grand Trunk #138129
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
Model Features:
- Scaled from field measurements & diagrams of a GO F59PH
- End metal handrails with plastic stanchions
- Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
- All-metal etched grilles
- Full cab interior
- Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
- Operating headlights, rear light, and ditch lights
- GO units feature functioning tri-color class lights (white, green and red)
- American units feature functioning red marker lights
- Accurate sounds recorded from a GM 12-710G3A
- DCC/Sound units come equipped with an ESU LokSound decoder
HO EMD SD70ACe Diesel - DCC & Sound - Norfolk Southern (30th Anniversary) #1030
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
NS FEATURES:
Swapable alternate roof with leader PTC antenna array
(Also available separately [ATHG68899])
High-mounted headlight
Isolated cab
Front and rear illuminated ditch lights
Late handrails
Norfolk Southern - Heritage
In 2012, Norfolk Southern unveiled a group of 20 locomotives painted to honor their predecessor roads. In the late 2010s, the units had their roof configurations modified to accept Positive Train Control antennas. Both roof styles are included.
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Slimy Grime Light Enamel Paint - 35ml Bottle
Enamel type effect for modelling.
This light green colored effect is perfect for creating moss and slimy surfaces caused by dampness. Apply and fade with a clean brush moist with Enamel Thinner. Ships, boats, ports, wooden doors and many amphibious vehicles show this effect very particular due to the water and the humidity. Observe real pictures to use them like reference in your models.
You can combined with Slimy grime Dark.
Intermountain HO - HTTX Yellow Trailer Train
60 ft Wood Deck Flat Car
Features sharp paint and lettering, wire details, laser-cut wood decks, metal wheelsets and Kadee(R) couplers.
HO Scale 70s GMC 9500 (Short Hood) Kit
This 1970s Era GMC workhorse is ready for your hauling needs. Precision cast pewter wheels, tires and details combined with a resin cab are designed for easy assembly and painting. Clear parts enhance the finished model. Windshield panels are laser cut and the kit includes waterslide decals. Put this short hood 9500 muscle to work delivering commerce on your pike. Detailed instructions can be viewed on the Showcaseminiatures.net website
Masking Tape for Electronics - Silicone Adhesive
1/4 inches wide, 15 ft long, 0.0025 inches overall thickness
Product ID: 7648A711
Spool Material - Plastic
Tensile Strength - 30 lbs./in. width
Adhesion to Steel - 25 oz./in. width
Electrical Properties - Electrical Insulating
Liner Type - No Liner
Specifications Met - UL 510
Color - Amber
Additional Specifications - SDS
REACH - REACH (EC 1907/2006) (07/16/2019, 201 SVHC) Compliant
RoHS - RoHS 3 (2015/863/EU) compliant
Use this polyimide tape to wrap and splice cables, mask components while soldering, or as a 3D printing surface. It dissipates heat and is an excellent electrical insulator. Tape with silicone adhesive withstands higher temperatures than acrylic adhesive.
HO Enterprise 2-Bay Covered Hopper - GFCX #110
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
Evergreen Scale Models - Opaque White Polystyrene I-Beam .250In x 14In (3 pcs pkg)
Blair Line HO Scale - Mega Set Modern Tagger Graffiti Decals - Set #14 pkg(10)
HO EMD GP35 - Paragon4 Sound/DC/DCC - CP Rail #5004
(Multimark w/5 Inch Stripes)
Ubiquitous on American railroads, the EMD GP35 is a 4-axle diesel-electric locomotive built by EMD and subsequently General Motors Diesel in the mid 1960s. Over 1300 of these locomotives were produced, and they were operated by virtually every major railroad in the United States. Additionally 26 units were built for Canadian railroads and another 57 units were built for Mexican railroads. These freight locomotives were powered by EMD 567D3A 16-cylinder engines that generated 2500 horsepower.
List of individually controllable lights in our EMD GP35 models:
- Headlight
- Rear Light
- Mars Light (SP only)
- Numberboard Lights (Front & Rear)
- Front Classification Lights
- Rear Classification Lights
- Emergency Light (SP only)
- Rotary Beacon (where appropriate)
- Ditch Lights (where appropriate)
- Cab Light
Road-specific detail options that are prototypically accurate for each road name:
- Truck sideframes
- Dynamic brake hatch
- Open & closed type fans
- Short hood detail arrangement
- Long hood end detail arrangement
- High short hood option where accurate
- Horn type and location
- Bell location
- Multiple front pilot types
- Multiple rear pilot types
- Accurate cut lever types
- MU receptacle arrangement
- Multiple sunshade options
- Antenna type and location
- Wind deflector type
- Rooftop AC for ATSF type
- Rotary beacon type and location
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up
- ABS Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, Wipers, and Etched Metal Grills
- Prototypical Light Operation - accurate for each paint scheme
- Prototypically Accurate Sounds for the EMD GP35 Diesel Locomotive
- Metal Kadee-compatible Couplers (2)
- Will Operate on Code 70, Code 83, and Code 100 Rail
- Minimum Operating Radius: 18 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
HO GE 44 Tonner Phase Ic - DC/DCC/Sound - Rio Grande (Black & Yellow) #40
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
HO GP9 - DCC Ready - Great Northern GN #690
GN FEATURES:
Winterization hatch with horn mounted on top
Long hood-forward operation
-Nail- style antenna
GN style fuel tank skirts
In 1967, Great Northern introduced a new paint scheme, consisting of blue, white, and dark grey-green. Known as the Big Sky Blue scheme, it took its name from an unofficial nickname for the state of Montana. Several of GNs GP9 locos received the treatment as depicted here.
In 1970, GN was merged with the other Hill roads to form Burlington northern; however, the Big Sky Blue painted units survived for some time after with a simple BN patch.
ROAD NUMBER SPECIFIC FEATURES:
#682
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#683
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#688
Dynamic brakes
bell mounted on long hood
#690
Dynamic brakes
bell mounted on long hood
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and ?printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
Red
From traffic accidents to chemical spills, the Hazardous Materials Unit provides a critical role in the modern Fire Department, carrying equipment and personnel ready to handle some of the most challenging and dangerous situations.
This heavy-duty rig is perfect for assignment to a firehouse in the industrial district of any HO scale city, and looks great parked with your collection too!
Each SceneMaster vehicle is a highly detailed replica, using diecast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
Atlas - N Scale GP-9 TT - Gold DCC Sound - Toronto Hamilton & Buffalo #403
Features:
Powered low friction drive
Blackened metal wheels
Dual brass flywheels
Directional lighting
Golden-white LEDs
AccuMate couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
AccuMate couplers are made under license from AccuRail, Inc
HO GMD SD40-2 - DCC Ready - St. Lawrence & Hudson #5636
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
Gunderson Multi-Max Auto Rack - CSX
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
DC/DCC/Sound - MLW FB-2 Canadian Pacific (script lettering) #4466
FB-2 and FPB-2 models feature:
Operating back up lights. As appropriate.
Roadname specific details with or without dynamic brakes. As appropriate.
The only HO scale Alco/MLW B unit with accurate phase details including vertical or horizontal battery box louvers and etched metal Farr or mesh side grilles.
Canadian or American cast Type B trucks. As appropriate.
Full underbody piping and conduit.
Correct roadname and manufacturer specific FB-2 and FPB-2 fuel tanks.
Canadian Pacific features:
Phase 2 body with horizontal battery box louvers and Farr grilles.
Dymanic brakes
CP fabricated water tank
Dofasco Type B trucks
HO H-6-G - DC/Silent - Canadian National Railway (Tilted Wafer) #1403
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO Vancouver Iron Works Piggyback Flatcar - Canadian National #688127
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
50Ft Berwick Box Car - Detroit Toledo and Ironton
#18807
MODEL FEATURES:
Ready-To-Run
Full under body detail with brake rigging
Overhanging X-panel roof
Non-terminating sine wave ends
Separately applied wire grabs
Detailed end ladders and brake gear
Accurate painting and printing
Blackened metal wheels
AccuMate couplers
HO New Look Bus Edmonton Transit - Route 38 to University #514 Deluxe
White Scheme
Deluxe New Look Bus models also feature:
Interior lighting
Working headlights and tail lights
Illuminated front destination sign
Painted seatback handrails
Two-tone seats (where appropriate)
A 9-12 volt DC power supply (not included) is required to power the lighting features.
HO FMC 4700 Covered Hopper - C&NW #182959
MODEL FEATURES:
- Separately-applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, -brake cylinder and triple valve
- 100-ton trucks with 36 inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
- Factory applied roof walk, roof hatch, end details, ladders, and wire grab irons
- Two outlet grate variations
- Accurately painted and printed on a highly detailed, injection molded body
- See-through etched metal end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- All 3-packs feature unique road numbers
- Minimum radius: 18 inches
HO 50ft PS 5277 Cu.Ft. Exterior Post Boxcar - Rock Island #302160
FEATURES:
- Laser Sharp Painting and Printing
- 33 inch InterMountain Precision Metal Wheelsets
- Kadee #178 Metal Knuckle Couplers
Date: NEW 8-79
Minimum Radius - 22 inches
HO EMD FT A+B Set - DC/Silent - Northern Pacific (NP Pine Tree Scheme) #5409D + 5409C
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
Brown Unitrack Unijoiner - pkg(20)
Montreal Commuter Early #1303
The Rapido HO Scale FP7 features:
-Designed from original EMD/GMD blueprints and field measurements
-First ever 100% accurate GMD-built FP7 locomotives - This is not a stand-in
-Road-number and era-specific details applied at the factory
-Phase I grilles or Phase II Farr grilles as appropriate
-Steam generator or no steam generator panel as appropriate
-Correct fuel tank, end door, and other unit-specific details
-Unmatched underbody details including air piping
-Full cab interior
-Operational headlight and operational ditch lights (if appropriate)
-Operational numberboards, class lights and backup light (DCC)
-Drive system designed for silky-smooth slow-speed operation
-Metal Macdonald-Cartier Knuckle Couplers
-DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings
-Several road numbers per paint scheme
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
Factory installed Celcon handrails
Individually applied wire formed grab irons
5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
See-through cab windows
DCC Ready 21-pin NEM plug
LED Illuminated front and rear headlights
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brand of track
Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMDs most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
PROTOTYPE MANUFACTURER: EMD
Axles: 4
LIGHTED: LED Lighting
Minimum Age Recommendation: 14 years
Is Assembly Required: No
HO 4-6-6-4 Steam Challenger - DCC & Sound - Union Pacific #3933
Detailed Information
Union Pacific
In the spring of 1941 UP locomotive designers began working on a locomotive to team up with the new 4-8-8-4 Big Boys then under construction at Alco. The Big Boys were designed to pull heavy freights up the Wasatch Range in Utah to the division point at Green River, WY. What was needed was a locomotive to take over at that point that could speed the freights eastward across the Wyoming Division. Building on their experience with the original CSA 4-6-6-4 Challengers UP and Alcos designers developed a newer and better Challenger type locomotive. The result was a group of 65 4-6-6-4 Challenger built in three separate groups during World War II.
ROAD NUMBER SPECIFIC FEATURES:
#3985
Modern Excursion version
Oil Burner
Era 1980s - 2000s
#3933
Coal Burner
Dual smoke stack
Tender bunker coal extensions
Era 1940s - 1959
#3967
Coal Burner
Dual smoke stack
Smoke Lifters
Era 1940s - 1959
#3997
Coal Burner
Dual smoke stack
Tender bunker coal extensions
Era 1940s - 1959
UP painted several of their Challengers in their two-tone grey paint scheme for passenger service. They also added smoke lifters and converted many to oil burners as well.
ROAD NUMBER SPECIFIC FEATURES:
#3976
Two-tone grey w/ yellow lettering and striping. Oil burner
Dual smoke stack. Era: Late 1940s - Mid-1950s.
STEAM LOCOMOTIVE FEATURES:
Illuminated number boards and headlights
Headlight turns off in reverse
Illuminated directional back-up light in the tender
Correctly operating eccentric cranks
Adjustable top cab vent and cab windows
Pivoting front and rear engines for negotiating 18inch radius curves
Current pick-up on all driver and wheels
Boiler backhead with full details and printed gauges
Synchronized chuff, whistle, bell, blow-down, air compressor, dyno and pop-off valve sounds
User-controlled whistle, short whistle, bell, squeal, coupler crash, injector, water stop and light dimmer
Individually-applied detail parts, including brass-painted bell and whistle, piping, valves, generator, steps, air pump, air tanks, reverser and coupler lift bar
Front coupler pocket can be inserted to mount operating coupler
Minimum recommended radius: 22inch
NEW FEATURES:
Dual cube speakers for great sound quality
Lighted firebox flicker effect with see-through firebox door
Upgraded headlight lighting with brighter LED
Improved loco-to-tender connection harness for increased durability and serviceability
SOUND EQUIPPED MODELS ALSO FEATURE
Tender-mounted DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, whistle, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Built-&-Ready Landmark Structures - Old Weathered Barn
Assembled - 7-13/16 x 5-11/16 inches (19.8 x 14.4cm)
Fully assembled and weathered traditional gambrel barn features a concrete silo, fieldstone foundation, shake shingled roof, hayloft door with pulley and rope plus a cupola with vintage weather vane. Siding, windows and barn doors are in various states of disrepair.