Trinity 3-Bay Hopper - BORX #500099
ETA: October 2021
Detailed Information
MODEL FEATURES:
Two body styles represent 10-panel and 12-panel variations
New body styles N including BNSF with stiffeners
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Coupler cutbar and Air hose on each end
Separately applied end cages and etched end platforms
Photo-etched metal roofwalk
Weighted for trouble free operation
Machined metal wheels
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Standard size coupler draft gear box with screw mounted lid
Fully assembled and ready for your layout
Replacement parts available
Minimum radius: 18inch
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
PROTOTYPE AND BACKGROUND INFO:
Trinity Steel was founded by C. J. Bender in Dallas in 1933. The company didnt enter into the railroad freight car market until 1984, when Trinity acquired the railcar designs and production facilities of the Pullman-Standard Car Manufacturing Company, once the largest railcar manufacturer in North America. That same year Trinity also acquired the railcar designs of General American Transportation Corporation. In 1986 the rail car designs and production facilities of Greenville Steel Car Company were purchased, including the auto rack designs of Portec-Paragon. Also acquired in 1986 were the railcar designs of North American Car Corporation, and in 1987 Ortner Freight Car was acquired.
With this collective experience across several facilities, Trinity developed many new designs that became ubiquitous to present day railroading. One of their most famous designs is the 3-bay 5161cuft covered hopper. This covered hopper is optimized to transport agricultural products, sugar, dry chemicals, or other similar products and can be seen in unit train assignments all over North America. Introduced around 1995, these cars are extremely common today and owned by many Class 1 and short line railroads alike.
Gunderson Maxi III Well Car (5-Unit Set) - TTX #73456
MODEL FEATURES:
- Fully assembled and ready for your layout
- Weighted for optimum performance
- Razor sharp painting and printing
- Prototypically correct 33 and 38 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Body mounted McHenry operating scale knuckle couplers
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- Replacement parts available
- Minimum radius: 18 inches
85Ft Budd 10-6 Sleeper UP Heritage Fleet - Ready to Run - Standard - Union Pacific, Willie James #202
(Armour Yellow, gray, red)
Product Information
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
Perfect for fan trip and excursion service
Modern-Era UP excursion scheme
Factory-Printed Car Names and UPP reporting marks
Factory-installed grab irons
Prototypically accurate window tinting
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24inch radius is recommended for operation.
Delivered new by Budd in 1950, this car started life as 10-6 sleeper -Pacific Domain.- Used as staff car #202 after 1972, it received the name -Cabarton- in 1980. Remodeled as a crew car with four bedrooms in 1989, it was renamed in early 2009 to honor long-time UP executive chef Willie James. Today, the car serves as a support center for the excursion trains, and includes both a large kitchen and dining/lounge area.
Spray Can - Pure Orange (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 60ft NSC 5150 3-Bay Covered Hopper - Cargill (ICMX) #1124
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Custom Small Propane Tank - Silver
Pre-painted and labeled in mixed propane brand labels.
HO ET44 Tier 4 - DCC Equipped - CN Heritage/BC Rail #3115
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
G (1:24) ABS Hand Rail (1pc)
Use for hand rails on platforms, walkways, balconies and any other elevated structures with public access. Precision Injection Molded in Gray ABS.
Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
Tip: ABS hand rails may be curved to fit circular applications by softening them in warm water or heating with a hair dryer.
SCALE
G
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1-3/4In
HEIGHT IN MM
44.5mm
WIDTH IN INCHES
3In
WIDTH IN MM
76.2mm
LENGTH IN INCHES
24In
LENGTH IN MM
600mm
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
HO Lightweight Coach - CNR - 1954 Scheme #5598
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO 73Ft Center Partition Car - Canadian Pacific (SOO) #600373
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
Drill Bit #62 - 0.038inch Diameter (2 pkg)
Product Information
Walthers Drill Bits are the right tools for all kinds of hobby projects, from detailing locomotives and cars, to scratchbuilding, wiring and more. Theres a full range of common wire gauge - jewelers drill bit sizes from number 80 to 43, and each pack includes two ready-to-use bits. Walthers miniature hardware is a complete range of ready-to-use parts and tools for hobby projects, including wood, machine and nylon insulating screws, plus appropriate hex nuts and washers, in assorted standard sizes (machine and wood screws may be brass or brass plated). Drill Bits are part of the line of Walthers miniature hardware and tools.
HO SD70 - DCC & Sound - NS/ex CR Patch #2580
Detailed Information
NS EX CR FEATURES:
Same details as Conrail units below
Aquired by NS after 1998-1999 split of Conrail. Lasted several years before recieving full NS paint
CR FEATURES:
Nathan K5LAR24 horn
CR-specific antennas and conduits on cab and long hood
Air Conditioner
Small front plow
Dual fuel sight glasses
Late fuel tank
Spare knuckle brackets on rear pilot
Spare knuckle basket on walkway
Cab vent
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Alco RS-11, 2nd Run - Diesel Locomotive - DCC Ready - Maine Central - Pine Tree #801
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
Tangent Scale Models HO Conrail PC Samuel Rea Shops 4600 Covered Hopper
Product: PC Samuel Rea Shops 4600 Covered Hopper System
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps
Wheels: CNC-Machined 36in Wheels
Conrail (CR) H51C -Quality Gray Repaint 1992- replicates the 1990s-2000s look for the 400-car H51C class. Conrail repainted many cars in their Conrail Quality scheme, and we think the SRS 4600s look particularly sharp! This CR car has later-era gravity gates, replacements for the original Youngstown gates. The car body is equipped with body-mounted brake hardware with center-tube linkage. Sam Rea built the car with a ribbed roof hatch, a low brake housing and a side-mounted train air line the length of the car, all features that are present on this Tangent replica. The B-end has as accurate Ajax hand brake, modern brake wheel, and a replacement Morton crossover walkway. Check out those gorgeous 100-ton Barber S-2 trucks with proper body-style brake beam and rotating Timken caps! This Conrail Quality H51C is painted in light gray with black graphics for the 1992+ era. Look in the upper right corner, and you will notice the ex-PC car number! RTR Conrail Quality and ready to work on your railroad.
HO MP15AC - DCC Ready - Lake State Railway #1502
Detailed Information
LSRC FEATURES:
MU hose holders on each end
Operating front and rear ditch lights
Air filter box, horn, decal placement, and antenna style per road number
Lake State Railway began operations in 1992. LSRC operates on former D&M lines in the lower peninsula region of Michigan. Commodities carried include aggregates, coal, and grain. In 2016, LSRC acquired two MP15AC locomotives from Union Pacific. 1501 is a former MKT unit, and 1502 was formerly owned by MILW.
LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Windshield wipers
Lift rings
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
NEW FEATURES:
Operating ditch lights (if equipped)
Operating ground lights
Newly designed motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
The definitive collection of pigments designed exclusively for modelers. A series of basic necessary and frequently used colors mixable between. AK Pigments are extremely fine .These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve. Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.
HO SD70ACe - DCC & Sound - Norfolk Southern #1112
Overview
NS FEATURES:
Late-production 11XX series units
PTC Antenna roofs
Late handbrake wheel, anticlimbers, jacking pads & EFCO buttons
Extra MU detail parts included
Built in 2014, these NS units came with isolated cabs and PTC antennas. 175 were built on this order, and all are still on the active roster, albeit with 9 units currently in storage. They are used on all types of freight trains.
SD70ACE SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
White River Productions - Model Railroad News, January 2024 - Magazine
Product News
Locomotives & Rolling Stock
Vehicles & Loads
Structures, Scenery & more
Books & more
HO-Scale Reviews
Landmark Locomotive? Rapido Trains Early Phase U25B Diesel Locomotive
Six-Axle Returns? Hornby Hobbies/Rivarossi U25C Diesel Locomotive
A U-Boat in Blue? Atlas U33B Diesel Locomotive
Rear End Perfection? Tangent Scale Models Wide-Vision Caboose
Tantalizing Tunnel Motors? Athearn SD40T-2 Diesel Locomotive
Kit Classics Adds Caboose? ScaleTrains Steel Cupola Caboose
N-Scale Review
New Mill Gondola? Micro-Trains Line 65-foot Mill Gondola
O-Scale Review
Rebuilt Well and Tall Container? Atlas Rebuilt Well Car and 40-foot High-Cube Container
Book Review
Little Rock? Lots of Possibilities?Barton Jenning?s The Little Rock
From the Archive
HO Collector presents AHM Old-Time Freight Cars
Columns & Departments:
Editorial & Letters
Prototype Profile?Early EMD Six-Axles SD7 and SD9
Timetable
Dealer Directory
Advertising Index
10Ft 6In Modified 1937 AAR Boxcar - Southern Billboard #20128
HO Vancouver Iron Works Piggyback Flatcar - Canadian National #688031
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
HO 100-Ton Open Hopper - Upper Merion Plymouth #7418
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
HO Budd Slumbercoach - Amtrak (Phase 1) #2027 Loch Ness
All new from the ground up, the Rapido Slumbercoach features:
Designed from original blueprints
Full Rapido level of underbody detail including separate pipes and conduits
Full multi-color interior detail including roomette doors
Track-powered interior lighting (operable on both DC and DCC)
Accurate GSC 41-NDO-11 trucks with disc brake detail
Etched-metal end gates
Sprung diaphragms
Rapidos renowned stainless-steel finish
HO Laser-Cut 2-Lane Curved Wood Grade Crossing - 17-19in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights.
HO Master MP-36 - DCC/Sound - MBTA #010
Features:
- Golden-white LEDs
- Realistic die-cast underframe
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Realistic lighting effects including ditch lights and in-cab light
- Metal knuckle couplers
- Detailed cab interior
- Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
- Coupler cut levers
- Multiple unit hoses and trainline hoses
- Recommended 22 inch radius with Atlas passenger cars
DCC Ready Units:
- Equipped with a speaker for easy conversion to sound with the addition of a decoder.
DCC ESU LokSound Functionality Features:
- Over 20 sound effects are available including Head-end Power (HEP), engine start-up and shutdown, prime mover sounds through all eight
notches, bell, air horn, air compressor, dynamic brakes and more.
- There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
Peco PLS-135 Stationary Decoder
Peco Products PLS-135 SmartSwitch Stationary Decoder for use with PLS-100 for DCC control
The Peco-PLS 135 SmartSwitch Stationary Decoder can be operated by a DCC controller, and uses the constant DCC voltage in the rails as its power supply. The decoder is also easy to program, and is compatible with most makes of DCC control systems.
Scenery Mortar - Gray Rocks (17-1/2oz)
Self-adhesive putty can be used to create all kinds of scenic formations. Mix one part mortar with one part water, knead into a pasty dough and apply. Stays workable for up to four hours, dries completely in two days.
HO Enterprise 2-Bay Covered Hopper - Canadian National (MOW Red) (3pkg) #1
3-Pack includes the following numbers, all individually packaged: #53314, #53315, #53317
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
UR93 Features:
Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support).
More than double the radio range of UR92 Duplex units.
Improved multi-path performance for cluttered layouts.
Plug and Play setup, PS14 Universal power supply included.
Compatible to be mixed with UR92 LocoNet Duplex Radio systems, for added coverage and improved reception.
Status LEDS.
Supports combinations of DT602D/DE and DT500D, DT402D and UT4D Duplex Radio throttles.
UR93E available for countries that require EN-300-328 Wireless conformity.
HO RTR 68Ft Bulkhead Flatcar - Illinois Central #978742
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
HO 53ft Jindo Container - EMP ex-FEC Set #1 (3pk)
(#968376, 968384, 968399) (BLUE/YELLOW)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting
N Scale Dash 8-40CM - DCC & Sound - BC Rail: Red/White/Blue #4603
Our N Scale Dash 8-40CM model features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
Heavy, die-cast chassis with a powerful motor and dual flywheels
Operational headlights and rear lights with operational factory-installed ditch lights (plus rock lights on BCOL locomotives)
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
Factory-installed couplers mounted at the correct height
HO GE Dash 9-44CW - DC/DCC Ready - Burlington Northern Santa Fe (BNSF Heritage I) #999
BNSF FEATURES:
High-mounted number boards
K3 horn
Front ditch lights
ATSF -Gullwing- cab
Standard brass bell
Part of the first new BNSF locomotive order to be painted in the then new official corporate colors, these -Heritage- GE units became affectionately known by railfans as -Pumpkins- based upon the Great Northern colors used on some early diesels. Some are still running today in this scheme.
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO EMD FT A+B Set - DC/DCC/Sound - Burlington (CB&Q) #110-A + 110-B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
Circuitron 8101 - Gate/Semaphor Actuator - Extra Cable and Actuatores.
Gunderson Maxi III Well Car (5-Unit Set) - Southern Pacific #513827
MODEL FEATURES:
- Fully assembled and ready for your layout
- Weighted for optimum performance
- Razor sharp painting and printing
- Prototypically correct 33 and 38 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Body mounted McHenry operating scale knuckle couplers
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- Replacement parts available
- Minimum radius: 18 inches
HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - CSX #242046
Product Information
Serve a wide range of HO industries with the 37ft 2980 Cubic-Foot Two-Bay Covered Hoppers from WalthersMainline. Based on prototypes introduced in the late 1980s, they can be found hauling cement, fracking sand, roofing granules and similar loads. Features of the layout-ready models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from late 1980s to the present
Separately molded and applied hopper gates
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
60ft Pullman-Standard Flatcar - Ready to Run -- Illinois Terminal
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
O Scale FasTrack - The Polar Express, Ice Track (4pcs)
Track illuminates and flickers as the train runs over the track! For added fun, place the icy lake map under the track to re-create the chaotic icy lake scene, as depicted in the The Polar Express motion picture!THE POLAR EXPRESS and all related characters and elements & Warner Bros. Entertainment Inc. (s23)
- 4 pieces of O36 illuminated FasTrack curved track
- Includes a 47 x 23 inch icy lake track map
PRODUCT SPECIFICATIONS
Gauge: O Gauge
Power: Electric
EMD GP9 Phase II, High Short Hood - Standard DC - Canadian Pacific #8617
(Action Red, white, black, Multimark Logo)
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today.
Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21-pin DCC plug
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
Based on units in service during the 1970s - 1980s with:
Short-hood forward operation
Nathan K3 air horn
Sinclair radio antenna
Pyle early dual sealed beam headlight
CP-style bell and bracket
Winterization hatch
Sloped buffer block
Peacock brakewheel and stand
HO 40Ft Ortner 100-Ton Open Aggregate Hopper - Blue Circle Cement WBCX #73018
Product Information
Move heavy bulk loads for your railroads customers with a fleet of WalthersProto 40Ft Ortner 100-ton Open Aggregate Hoppers. Highly detailed and fully assembled, other features include:
One time run of these roadnumbers, order now - limited quantity available!
Distinctive high-sided design in service from 1970s to present
Prototypes used for hauling heavy aggregates including limestone, iron ore and taconite pellets, gravel, sand and more
Factory-installed air-equipped door details as appropriate
Factory-installed wire grab irons and end railings
Removable load included
Detailed brake gear
Weighted for excellent tracking
Ultra-smooth rolling metal axles and RP-25 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
HO 35Ft Fruehauf Integral-Post Volume Van - PRR: 1950s #35 C 542
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
HO GP40-2L Diesel - DCC & Sound - Indiana Harbor Belt #4020
IHB FEATURES:
- Painted over class lights
- Long hood-mounted horn
- Cab-mounted bell
- Removed plow
- Sinclair antenna
- 3600 Gallon fuel tank
ROAD NUMBER SPECIFIC FEATURES:
#4020
- Dual rear headlight
- square EMD ditch lights
- modified truck side frames
#4021
- Single rear headlight
- square EMD ditch lights
#4022
- Single rear headlight
- small round ditch lights
GP40-2 LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18 inches
SOUND-EQUPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO - Nathan K5 Air Horn K5LR3
HO SD60 - DCC/Sound - Union Pacific #2197
MODEL FEATURES:
Locomotives come with railroad-specific details including: Operating beacon (in DCC/Sound version), horn, winterized hatch, antenna, handrails, etc.
SPECIFICATIONS:
DCC: Equipped with Econami2
PROTOTYPE MANUFACTURER: EMD
Axles: 6
LIGHTED: LED Lighting
PROTOTYPE AND BACKGROUND INFO:
In 1984, Electro-Motive (EMD) introduced the 60 series locomotive. These had many improvements over the earlier models including features such as: New and improved EMD 710 power plant producing 3600 HP, wheel slip control, computerized cabinet replacing the older and unreliable components.
This design spawned into many other upgrades within its class like the modernized wide cab, Isolated cab, and even the start of AC traction technology.
These locomotives were suited for just about any mainline service that could be thrown at them. The model was fairly popular with class one railroads, with Norfolk Southern purchasing the most at 151 units. Most of them are still in service today. Norfolk Southern in 2010 started a large full rebuild program of their SD60s (including purchasing cores from other sources) into SD60Es, which rebuilt them from the frame up with new electrical components and a newly designed cab to improve visibility and forward crash impact safety.
HO 33 Inch Ball-Bearing Insulated Brass Wheelsets (12/pkg)
Nickel Silver Plated Brass Insulated Wheelsets
These wheels follow NMRA RP-25 Standards.
One wheel is insulated from the all-metal axle.
The entire wheelset is non-magnetic.
The axle length is 1.006in (+- .004in)
28in wheels are used on modern Tri-Level Autoracks, some Bi-Level Autoracks, and some older intermodal cars such as Impack spine cars, front runners & four runners - check your prototype.
33in wheels are used on 50 & 70 ton capacity cars (CAPY approximately 150,000 LBS or less).
36in wheels are used on 100 ton capacity cars (CAPY approximately 200,000 LBS), and on all passenger cars no matter the era.
38in wheels are used on 150 ton capacity cars, primarily the center connection trucks on modern intermodal cars with 33in wheels at the coupler ends.
(Cabooses can use either 33in or 36in wheels depending on the prototype.)
The CAPY information is typically printed on model freight cars and can be used as a guide. Some cars have the wheel size printed on the sides or ends of the car in the data. If you are ever unsure of which size to use, you can simply replace the wheels currently on the car with the same size.
Wheel diameter can be measured with a caliper:
28in wheels measure (28/87.1=.321in) in HO scale.
33in wheels measure (33/87.1=.378in) in HO scale.
36in wheels measure (36/87.1=.413in) in HO scale.
38in wheels measure (38/87.1=.436in) in HO scale.
(87.1 = HO scale to prototype ratio. HO scale is 87.1 times smaller than the prototype).
N Scale 40Ft Standard Height Container - China Shipping (CCLU) Set #2 (2pkg)
FEATURES:
Separately applied door rods and handles
Optional separate vents
Prototypically accurate -beveled- all corrugated sides
Each set comes as a 2-pack
HO RTR Trinity Rail 3281 Cu Ft 2-Bay Covered Hopper - First Union Rail (WSOX) #804981
(2011, gray, green, red, yellow conspicuity marks)
Product Information
This HO Scale TrinityRail 3281 Cu.Ft. 2-Bay Covered Hopper is based on a common late-1990s and later prototype commonly used to haul frac sand, roofing granules and similar materials. With the boom in frack sand traffic it isnt uncommon to see these prototypes used in unit trains. Prototype cars measure 41ft-11inch long, and the cars are equipped with three or five round loading hatches and a pair of gravity outlets for commodity off-loading. Compared with earlier 2-bay covered hoppers, these cars are distinctive. Notably, an overhanging arched roof, heavy top reinforcement stiffener, and folded jack pads at the bolster are spotting features for the Trinity 3281. This design has proven to be popular with shippers and railroads alike. The HO scale freight car features an injection-molded body, applied wire grab irons, photo-etched walkways and working shelf-type knuckle couplers without trip pins for scale appearance. Other details include roadnumbers printed on the truck sideframes, coupler cut levers, NMRA compliant car weight, trucks with spinning bearing caps, multiple roadnumbers per scheme and graffiti on select roadnumbers.
1/8 inch OD Square Aluminum Tube - 0.014inch Thick x 12inch Long
Square Aluminum Tube (1 pc)
Outside Diameter: 1/8 inch
HO Telltales - Kit
Product Information
Make your HO operations safer with this authentic SceneMaster Telltale kit that features:
Newly tooled layout accessory kit!
Used throughout the steam- and early diesel-eras
Installed at both ends of tunnels, bridges and structures with limited overhead clearance
Provided advance warning to brakeman on tops of cars of approaching danger
Parts to build two single track Telltales
Designed for easy construction and installation
Great detail alongside Chooch Tunnel Portals, Cornerstone Bridges and other structure kits, each sold separately
Plastruct 90005 Angle ABS 3/16
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.125 (8pcs pkg)
HO RTR 60Ft Flatcar - Delaware & Hudson D&H #16144
MODEL FEATURES:
Working drop ends. Gently lift up & push inward to fold ends down.
Separately applied wire grab irons
Interior detailing
Decorated models fully-assembled and ready to run out of the box
Machined metal wheels and RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Minimum radius: 18inch
HO GE Dash 9-44CW - DC/DCC Ready - Arizona and California ARZC #4400
ARZC FEATURES:
Former BNSF units acquired in 2022
Details match BNSF 4300 class
PTC antennas
ARZC acquired several former BNSF Dash 9s in 2022. The most powerful units on the roster, they were numbered in the 4400 series to reflect this. The units are shown without their company logos.
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
Gunderson Maxi III Well Car (5-Unit Set) - TTX (Forward Thinking) #74059
MODEL FEATURES:
- Fully assembled and ready for your layout
- Weighted for optimum performance
- Razor sharp painting and printing
- Prototypically correct 33 and 38 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Body mounted McHenry operating scale knuckle couplers
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- Replacement parts available
- Minimum radius: 18 inches
HO GE C30-7 - DCC & Sound - CSX (YN2 Scheme) #7041
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
HO 4650 Centerflow Hopper BNSF
The Atlas HO Scale ACF(R) 4650 3-Bay Centerflow Covered Hopper is based on cars built by American Car & Foundry (ACF) in the 1960s, with another production run in the 1970s, these large capacity covered hoppers are used to carry grain, salt, dried kaolin clay, sugar and other bulk materials that have to be protected from the weather.
These HO models include etched-metal, see-through roofwalks, detailed brake gear, authentic 100-ton roller bearing trucks with blackened metal wheels and body-mounted Accumate(R) couplers with screw-attached coupler pockets. Undecorated models come with optional parts for three different types of loading hatches and two styles of discharge outlets. ACF(R) 4650 3-Bay Centerflow Covered Hoppers come prepainted and lettered in a variety of railroad-owned schemes with details appropriate for the early (pre-1971) or late (post-1971) production.
HO GE C30-7 - DCC Ready - CSX (YN2 Scheme) #7047
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
HO 5820 Covered Hopper - Procor/UNPX (Union Carbide) #122026
Era: November 1977+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
N, TT, HO Scale LokSound 5 Micro DCC/MM/SX/M4 - Next18 Decoder
(SPEAKER AND ENCLOSURE SOLD SEPARATELY!)
Note - If you want sound installed it the decoder, write the sound file number or the locomotive you are putting it into, in the customer comments section at the check out.
For Gauge: N, HO, & TT
The LokSound 5 micro is a little wonder: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we have ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small HO vehicles. All LokSound decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types.
The LokSound 5 micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.
Operating modes:
The LokSound 5 micro is a true multi protocol decoder. It supports DCC as well as Motorola, Selectrix and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus the decoders register themselves fully automatically on suitable command stations.
This decoder supports all DCC programming modes and thanks to RailCom, you may read out the CV values on the main, provided you have a command station supporting RailCom. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.
Motorola users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Control Unit 6021.
The M4 protocol supports the automatic registration on mfx compatible central units.
The LokSound decoder supports the Marklin braking sections just as well as the ZIMO HLU braking commands or the Lenz ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.
The LokSound 5 micro decoder is also suitable for analogue DC and AC (!) layouts.
Sound:
The LokSound 5 micro decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A double class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 ? 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.
The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.
The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.
Functions:
Despite its small dimensions, the LokSound 5 micro decoder has at least 6 amplified function outputs as well as one logic output. There are two more logic outputs on the Next18 interface, which alternately may be employed to control RC servos. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements ? known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO and Krois, as well as Telex couplers.
Motor control:
Motor control of the LokSound 5 micro has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique Auto Tune function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 micro decoder supplies sufficient motor current (up to 0.75 A) for the intended applications.
LokSound 5 micro DCC:
The LokSound 5 Micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.
HO AutoScenes - Ikes Ice Cream Truck
Ike needs only to ring the bell and the kids come running! Truck wheels spin. Set includes 3 children and Ike attached to the exit door of the truck.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
HO 40ft ACF Modernized Welded Boxcar - Pennsylvania Railroad #87520
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Foliage Clusters - Dark Green (50.8 in3)
Model bushes, hedges, shrubs, trees, and other high ground cover, and use on hillsides to model tree masses.
Sterling Salt #49031
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
Saber Saw Set
.022inch thick blade, 4-1/2inch long, 3/8inch wide. Ideal for large inside cuts and for cutting through thick material. Set also includes #36408 -push- & the #36406 -pull- miniture keyhole saber blades.
HO - Airhorns (Unpainted Brass Casting) - Delaware & Hudson Nathan M-3RT1
w/Bracket; 2 Bells Forward, 1 Back
HO 4-Bay Cylindrical Grain Hopper - Heritage Fund #396400
FEATURES:
- blackened metal wheels
- body mounted couplers
- non-magnetic axles
HO RTR Trinity Rail 3281 Cu Ft 2-Bay Covered Hopper - CIT Group/ Capital Finance (NRLX) #34041
(Ex-Ciment Quebec, 2005, gray, yellow conspicuity marks)
Product Information
This HO Scale TrinityRail 3281 Cu.Ft. 2-Bay Covered Hopper is based on a common late-1990s and later prototype commonly used to haul frac sand, roofing granules and similar materials. With the boom in frack sand traffic it isnt uncommon to see these prototypes used in unit trains. Prototype cars measure 41ft-11inch long, and the cars are equipped with three or five round loading hatches and a pair of gravity outlets for commodity off-loading. Compared with earlier 2-bay covered hoppers, these cars are distinctive. Notably, an overhanging arched roof, heavy top reinforcement stiffener, and folded jack pads at the bolster are spotting features for the Trinity 3281. This design has proven to be popular with shippers and railroads alike. The HO scale freight car features an injection-molded body, applied wire grab irons, photo-etched walkways and working shelf-type knuckle couplers without trip pins for scale appearance. Other details include roadnumbers printed on the truck sideframes, coupler cut levers, NMRA compliant car weight, trucks with spinning bearing caps, multiple roadnumbers per scheme and graffiti on select roadnumbers.
Acrylic Flat Colors - Sky Gray - 3/4oz (23mL) Bottle
XF-19
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO RTR SD40 (SD40-2) - DCC Ready - FURX #3025
Detailed Information
FURX FEATURES:
SD40 rebuilds, from many sources
Front ditch lights
Correct details per road number
Rear mounted break wheel
ROAD NUMBER SPECIFIC FEATURES:
#3001
Ex-SOO. Smaller 3600 gal fuel tank
extended range dynamic brakes
large EMD plow
deck mounted front ditch lights
#3005
Ex NDM. Large 4000 gal fuell tank
extended range dynamic brakes
Canadian style plow
pilot mounted front ditch lights
#3025
Ex-MP. Large 4000 gal fuel tank
regular dynamic brakes
small EMD plow
pilot mounted front ditch lights
extra MP style jacking pads
LOCOMOTIVE FEATURES:
LED lighting
Photo-etched stainless steel windshield wipers
Fully assembled and ready-to-run
Separately applied wire grab irons
Separately applied air tanks
Coupler cut levers
Rubber MU hoses
Fine scale handrails molded in engineering plastic
Non-sound version features 21-pin NEM DCC plug
See-through dynamic brake and radiator fans
Curved radiator fan grab iron
Exhaust stack
Frame mounted bell (unless noted)
Detailed 4000 gallon fuel tank (unless different capacity is noted)
Flexicoil-C trucks with high or low brake cylinders (per prototype)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body featuring new tooling
Painted and printed for realistic decoration
See through cab windows
Bi-directional LED lighting
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
Recommended radius: 22inch
3/16 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 3/16 inch
SD45-2 - DCC/Sound - HATX #910 (#3)
Detailed Information
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
Models equipped with DCC+Sound will have the new 645E3 20-cylinder prime mover recording by SoundTraxx
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; we are excited to include new features often requested, to the SD45-2 and upcoming Genesis models.
HATX FEATURES:
Windwings per prototype
Nose mounted headlight
Small anticlimber
Standard height Intertial hatch, exhaust stack, fan housings
Black or white numberboards per prototype
Firecracker or Sinclair antenna per prototype
3-or-5 chime horn per prototype
Frame mounted bell
Commonly used in lease service starting in the late 1980s. Prototype railroads would lease locomotives during power shortages and traffic upturns. These particular units were leased to several eastern roads including Grand Trunk Western and CSX.
LOCOMOTIVE FEATURES:
Safety tread on walkways
Fine-scale handrails for scale appearance
Factory applied wire grab irons
Windshield wipers
See through cab windows
Detailed and painted cab interior
Sliding side cab windows
Metal lift rings
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with a 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately painted and printed paint schemes
Body mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
New LEDs for trouble free operation
Bi-directional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18in
Recommended radius: 22in
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2
Sound units operate in both DC and DCC
Some functions are limited in DC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in operators manual
PROTOTYPE INFO:
The SD45-2 was an initial success; it was a complete improvement or upgrade as part of EMDs Dash 2 line; it had little to almost absolutely no flaws during the early stages of production and during the models official introduction. It was both popular and compatible with the original SD45 as well, with its large 20-cylinder engine. The SD45-2 lasted somewhat longer than most SD45 units on various owners rosters.
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
HO SD45T-2 - DCC & Sound - Bessamer & Lake Erie #900
Detailed Information
BLE FEATURES:
Cab headlight with upper gyralight (Operates in DCC mode)-unique to BLE
Standard window cab
Leslie 3-chime Horn on long hood
Pilot mounted front ditch lights
Small front anticlimber
In the early 2000s, BLE went on the used locomotive market looking for heavy and reliable motive power. They purchased 11 former SP/SSW SD45T-2s designating them as SD40-3s. These units were rebuilt with the removal of the SP nose headlight, -L- window cab, and large front plow. Additions included front ditch lights, a unique BLE-style cab headlight with upper gyra light and lower standard headlight, MU catches on the front pilot, and the horn being moved to the long hood.
SD45T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Photo-etched windshield wipers
Separately applied air tanks
LED Lighting
HTC truck sideframes
See-through cab windows
Welded electrical cabinet air filter box
All-wheel electrical pickup
See-through dynamic brake fans
Separately applied wire grab irons
Rubber trainline and MU hoses with silver ends
Standard late Dash-2 cab with or without -L- window per prototype
See-through radiator grilles with new rear truck gearbox specific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry operating scale knuckle couplers
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Chassis accepts Genesis motor retro fit kit for an even higher performance motor.
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Highly-detailed, injection molded body
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Economi sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO 50Ft FMC 5283 DD Boxcar - BNSF #223999
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Positionable sliding double doors
Body-mounted McHenry operating scale knuckle couplers
Painted and printed for realistic decoration
Precision machined metal wheels
Highly-detailed, injection molded body
Weighted for optimum performance
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
HO Marine Industries Piggyback Flatcar - Canadian Pacific #505659
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
N Scale 50Ft NACC Box - Delaware & Hudson D&H #28042
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
HO EMD GP7 - DCC & Sound - Erie Lackawanna EL #1214
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
EL FEATURES:
Re-Lettered Erie units; post 1960
Dynamic or non-dynamic, depending on road number
Two single-chime horns
-Canvas- sunshades
Long-hood-forward operation
Curved spark arrestors
In 1960, the Delaware, Lackawanna and Western Railroad merged with the Erie Railroad to form Erie-Lackawanna. The Erie had owned a sizeable number of EMD GP7s, which were all less than 10 years old at the time of the merger and still giving good service. Rather than spend precious money to repaint these units immediately, the EL decided to retain the Erie paint scheme, but omitted the -wings- on the ends of the units and added their own logos. The units continued in this guise until the mid-to-late 1960s when most were repainted in the grey-and-maroon EL scheme.
ROAD NUMBER SPECIFIC FEATURES:
#1207 Dynamic brakes
#1214 Dynamic brakes
#1221 Non-dynamic brakes
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO Heavyweight 6-Wheel Metal Passenger Trucks w/RP-25 Metal Wheels - Type 242A - 1 Pair
Product Information
The prototypes of this truck featured one-piece cast sideframes and were used on a wide range of heavyweight equipment. These trucks fit the Walthers (932-series) Heavyweight 12-1 Sleeper, 14-Section Sleeper and 3-2 Observation (all out of production), but adaptable to many other models. An easy upgrade for new and older HO Scale passenger cars, WalthersProto trucks are fully assembled and ready to use with built-in electrical contacts for car lighting and 36inch turned metal RP-25 wheels.
N Scale 3-Dome Tank Car - Ambrose Wine Inc.
These specialized cars were actually three complete tanks riding on one frame. They could be used to ship different types of petroleum products, such as gasoline, kerosene and home heating oil, or different grades of gasoline such as regular, super and premium to smaller customers from the 1920s to the 60s.
Colorful and completely assembled, the models feature body-mounted EZ-Mate II knuckle couplers.
PRR X31A Single-Door Boxcar: Shadow Keystone, Late - Single Car #76700
(1957-1960)
Detail Variations:
6-pack includes the following numbers:
#67408
#67417
#70173
#70384
#70410
#76700
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
HO EMD SW9 - DCC & Sound - Boston & Maine (B&M As Delivered) #1231
Boston & Maine:
Delivered in 1952
-Trash can- style spark arrestors
Deck mounted side handrails
Hood mounted number boards (road number specific)
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) #741003
1935+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO 36 Inch High Detail Semi-Scale Insulated Brass Wheelsets (12/pkg)
The front and back profile of these wheels is more prototypically accurate.
These wheels follow NMRA RP-25 Standards.
One wheel is insulated from the all metal axle.
The entire wheelset is non-magnetic.
The axle length is 1.006in (+- .004in).
Peco HO Code 83 SL E 8381 Streamline #8 Electrofrog Turnout - Nickel Silver Right Hand
Brown Ties - New North American-Style Turnouts from Peco
These new HO Scale Code 83 turnouts from Peco add more track options for modelers who use Code 83 track. Based on American Railroad Engineering Association drawings, these turnouts have been designed to meet NMRA standards. Peco Code 83 track features ties molded in creosote-colored flexible plastic that mimics the look of the prototype, plus wood grain, tie plate and appropriate spike details. All track and turnouts feature the correct prototypical tie spacing and all are DCC friendly.
Electrofrog turnouts and crossings feature powered (conductive) frogs for enhanced locomotive electrical pickup and may require special wiring/rail gapping in certain track configurations. Instructions are included with each turnout.
Shipped from Ontario Canada
HO 10 Inch Track Alignment Gauges - Curved - 30 Inch Radius
RibbonRail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking, and joining rail. Track Alignment Gauges are precision machined to NMRA standards and will work on any code of HO Scale rail. Available in many curve radii as well as straight.
HO & N Scale Van Dyke Farm Windmill (2pk) - Kit
This kit can be easily modified for use in N Scale.
DIMENSIONS:
1-5/8 x 1-5/8 x 8-3/4 inches (4.1 x 4.1 x 22.2cm)
The Cornerstone Series Van Dyke Farm Windmill kit brings a finely detailed, easy-to-build windmill kit to HO Scale. The kit includes parts for two windmills plus a cement base and wood well cap. The prototypes have been in use since the 1880s and are still in use today. The kit is adjustable to four different heights so you can add unique structures to several farm or ranch scenes. Farm Windmills are must-haves for rural scenes on your layout.
- Includes parts for two windmills
- Common farm structure
- Adjustable to four different heights
- Cement base and wooden well cap
- realistic 10ft diameter blade
- North American prototype for steam and diesel eras
- Molded in appropriate base color
- Easy-to-build plastic kit
All Scale Tidy Track Maintenance - Rail Tracker Cleaning Kit
The Rail Tracker cleaning tool actually follows the track and hugs the rail while you clean. This tool makes it easy to clean hard-to-reach areas like inside tunnels, around structures and under power lines!
Kit includes all you need to clean and maintain your track. Package doubles as a tray for storage. Replacement pads available. Designed to work on N, HO, HOn3 and three-rail O scale track.
HO Roadside Mail Boxes & City Mailboxes - Kit
Put your stamp of approval on this HO SceneMaster Modern Roadside and City Mailboxes kit!
Perfect for steam, diesel, and modern eras, the set includes parts to build four each (eight total) large standard and drive-up collection boxes, plus 12 rural mailboxes!
Track Magic Liquid Track Cleaner - 1.7oz Bottle
Deluxe Materials Track Magic is a special cleaning fluid for model rail and slot car tracks electrical contacts and wheels that:
- Maximizes conductivity and reliability
- Works in low power and confined space situations
- Revives old electric contacts and improves new ones
- Is safe on plastic, foam, acrylic and enamel paint
- Is safe in track cleaning vehicles
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
N Scale Arch Bar Trucks w/o couplers (1pair)
HO 45Ft Trailmobile Dry-Van Trailer - Taggart Trucking #5431
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
Stainless Steel Flat Sheet - 0.018inch x 4inch x 10inch
1 piece
Length: 10inch
Width: 4inch
Thickness:0.018inch
RS-18u, DCC & Sound - Ottawa Central #1865
Era:1998-2008
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
HO GE U25B Low Hood - DCC & Sound - New Haven #2509
The HO scale U25B Locomotive features:
Phase I, II & III units represented in 1st run. (Phase IV & other units will come with future runs)
Single-window style for low nose units. (Double-window in future runs)
Both low- & high-short hood versions
Early high- & later low-style side doors.
Road specific details for each model
Working step lights on low-short hood models
Different roadname-specific exhaust stacks
Roadname-specific battery box doors on engineers side
Roadname-specific air cleaner boxes on rear
Working inspection lights on all units
Lighted control stand inside cab
Different types of fuel & air tanks, as appropriate
HO PS 40ft Boxcar w/7ft Door - Southern Pacific (Delivery 1950+) #102199
Product: Pullman-Standard Southern Pacific Lines Postwar 40ft6in Box Car with 10ft Height and 7ft Doors
Scale: HO Scale 1:87.1
Truck: Tangent ASF 50-ton A-3 Ride Control trucks
Wheels: 33 inch wheels, with front and back detail and accurate tapered axles
HO 17,360 Gallon Chlorine Tank Car HOKX
FEATURES:
-Brake rigging molded separately
- Scale handrails
- Metal safety bars, tank fittings and safety placards
- AccuMate couplers
- Screw-attached 100-ton roller-bearing trucks for added reliability
- Accurate painting and lettering
- Brake wheel chain
HO Kansas City-Style Post-War PCC Streetcar - DCC & Sound - Toronto Transit Commission #4777
Maroon/Cream
Destination: Earlscourt Lansdowne
N Scale Prairie Co-Op Elevator - Kit
Classic small town terminal elevator
Typical of concrete elevators in use from 1915 to today
Used with all types of grain
Square design with four silos
Off-center head house
Cement block unloading shed
Cement block office with truck scale
Loading spouts for boxcars & covered hoppers
Separate dust collector, vents & sampling arm
Molded in white, light gray & clear plastic
Finished model measures:
Main Structure: 5-3/16 x 3-3/16 x 7-1/4 inches 13.1 x 8 x 18.4cm
Office/Scale House: 2-5/8 x 2-1/16 x 1-3/8 inches 6.6 x 5.2 x 3.4cm
Truck Scale: 1 x 3-1/2 inches 2.5 x 8.8cm
HO FM H16-44, Standard DC, Canadian National: Wet Noodle Scheme No.2202
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO SD60 - DCC/Sound - EMD #2
MODEL FEATURES:
Locomotives come with railroad-specific details including: Operating beacon (in DCC/Sound version), horn, winterized hatch, antenna, handrails, etc.
SPECIFICATIONS:
DCC: Equipped with Econami2
PROTOTYPE MANUFACTURER: EMD
Axles: 6
LIGHTED: LED Lighting
PROTOTYPE AND BACKGROUND INFO:
In 1984, Electro-Motive (EMD) introduced the 60 series locomotive. These had many improvements over the earlier models including features such as: New and improved EMD 710 power plant producing 3600 HP, wheel slip control, computerized cabinet replacing the older and unreliable components.
This design spawned into many other upgrades within its class like the modernized wide cab, Isolated cab, and even the start of AC traction technology.
These locomotives were suited for just about any mainline service that could be thrown at them. The model was fairly popular with class one railroads, with Norfolk Southern purchasing the most at 151 units. Most of them are still in service today. Norfolk Southern in 2010 started a large full rebuild program of their SD60s (including purchasing cores from other sources) into SD60Es, which rebuilt them from the frame up with new electrical components and a newly designed cab to improve visibility and forward crash impact safety.
HO Galvanized Culvert Pipe - 60 Inches (2pk)
Specifications
Scale: HO (1:87)
Sizes: 0.69 inch
Length: 3.4 inches
Galvanized steel culvert pipes have been around for over a century and serve many purposes from storm sewers to drain pipe and even irrigation. Found where roads or railroads cross low lying areas, streams, or other waterways, these galvanized pipes provide a pathway for water to flow while reducing erosion at these critical crossings.
Suitable for any era, these galvanized culvert pipes will look right at home on your layout. Each HO-scale pipe section is 25 scale feet long and comes in a variety of diameters, suitable for many different applications. Hollow throughout, each pipe features realistic corrugations both inside and out.
6mm Static Grass - Spring Grass (20g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
HO 1987 Chevrolet Caprice Sedan - New York Police Department - 75th Precinct #2907
This HO Scale 1987 Chevrolet Caprice Sedan from Brekina is based on the widely driven North American sedan. The model features a detailed injection-molded plastic body with fine decoration, interior seats and window glazing and chrome-plated parts as appropriate. This model is ideal for your 1980s and later street scenes.
HO 85ft General American G85 Flatcar - GTTX (Brown) #300333
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
HO Etched Brass Cab Sunshades - Comfort Cab (4pk)
Replace fragile plastic shades with durable brass etchings. Great for models which are handled often. Shades are adjustable and include mounting instructions.
HO EMD SW1200 - DCC Ready - Soo Line #328
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- Next18 plug for easy DCC conversion at any time (decoder sold separately)
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
HO Steel Railroad Bridge Tower Bent 2-Pack - Kit
Product Information
Walthers Cornerstone Steel Railroad Bridge Tower Bents are just the thing for constructing impressive steel viaducts on your layout. This kit includes parts for two tower bents used for supporting deck girder bridges of varying lengths.
Add realism to your HO railroad with the Cornerstone Engineered Bridge System!
Part of the Cornerstone Engineered Bridge System.
Common prototype design used with various types of bridges
Fits steam, diesel and modern-eras
Highly detailed parts
Easily cut to three different heights
Two sizes of concrete pedestals included
Use with Cornerstone Standard 30Ft, 50Ft and 70Ft Deck Girder Bridges (each sold separately) to model a continuous viaduct
Each Steel Railroad Bridge Tower Bent measures:
Width at Base: 4-1/2inch (11.4cm)
Width at Top: 1-13/64inch (3cm)
Height: 10inch (25.4cm)
Footings Large: 29/32inch (2.5cm)
Tall Small: 1/2inch (1.5cm)
Photo shows a typical viaduct modeled with Steel Railroad Bridge Tower Bent 2-Packs (933-4555), and 70Ft Standard Level Single-Track Railroad Deck Girder Bridges (933-4507), each sold separately:
NCE Decoders -- N14IP - Plug In For ConCor PA1, 4-8-4, etc. 4 Function N Scale
Available with an eight pin plug in. Four function outputs. 1 Amp rating, 1.25 Amp peak. Measures 1.15inch x 0.4inchx 0.12inch.
This is an EPF (extended packet format) decoder supporting:
Silent Running TM motor drive
Torque Compensation for ultra smooth low speed performance
Programmable Start, Mid and Maximum speed works for all speed modes
Motor rating 1.3 Amp continuous, 2 Amp peak (stall)
Four function outputs each with independent lighting effects generators
Select from 15 different lighting effects (Mars, strobes, beacon, flicker, etc)
Lighting outputs can be mapped to different functions
Uploadable speed table interpolated to 128 speed steps
Decoder assisted consisting
Support for all forms of DCC programming
Decoder programming lock mechanism
Brake on DC feature assists automatic train control
Intermountain HO - Norfolk Southern (Ex0 Southern)
60 ft Wood Deck Flat Car
Features sharp paint and lettering, wire details, laser-cut wood decks, metal wheelsets and Kadee(R) couplers.
HO 50ft Covered Gondola - NKP #44821
MODEL FEATURES:
- 70-ton Roller Bearing trucks
- Removable cover
- Separately-applied brake wheel
- Weighted for optimum performance
- 33 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Body-mounted McHenry operating scale knuckle couplers
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inch
PROTOTYPE AND BACKGROUND INFO:
Gondolas are low-sided railroad cars that are used for hauling bulky loads that don not need protection from the weather. The Roundhouse 50ft gondola is representative of larger cars that began appearing on the rails in the early 1950s, and many survive today working for modern roads and contractors.
Blended Turf - Earth Blend - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
N Scale GSI 48Ft Bulkhead Flat Car - BC Rail #51738
Features:
Die-cast body
Detailed deck
Detailed bulkhead lattices
Read-to-run
Superb paint & Lettering
Metals Bank
Cast Hydrocal plaster walls, plastic door & windows and full color paper signs and awnings. Perfect for your business district from the cracked stucco to the rusty tin staircase, this building is just brimming with character. A real blue collar working man s bank, kit features detailed Hydrocal castings, plastic doors and complete, easy-to-understand directions.
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
HO - Leslie Air Horn RS5R24
Atlas - N Scale GP-9 TT - Gold DCC Sound - Toronto Hamilton & Buffalo #403
Features:
Powered low friction drive
Blackened metal wheels
Dual brass flywheels
Directional lighting
Golden-white LEDs
AccuMate couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
AccuMate couplers are made under license from AccuRail, Inc
Modern Yard Office - Kit
Update your HO operations with the Modern Yard Office kit from Cornerstone. This easy-to-build structure is typical of container conversions used by many railroads to update or replace older offices and features:
-Compact facility perfect for todays freight, passenger or intermodal yards
-Separate doors and windows, air conditioner, electrical box, smokejack, decorative panels and more
-Printed interior
-Detailed plastic parts, molded in 3 colors
-Complete your installation with Trackside Signal Ducts (933-4091 sold separately)
HO F30D 50Ft TOFC Flat Car - Early Style - Undecorated Single Car
This car does NOT come with a trailer
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
HO Roman Stencil Letters & Numbers - Black - 12, 6, 4inch - Waterslide Decals
Description: (formerly 87-326-2) Alphabets - Roman Freight Stencil - Black
N Scale Code 55 - Metal Rail Joiners (24pk)
HO NSC 5277 PD Boxcar - British Columbia Railway #851012
FEATURES:
Bodies: 5111 or 5277 cubic foot styles
Ends: Nine or ten corrugations
Doors: 9ft or 10ft plug doors
Side Sills: Deep or shallow sills
Corner Posts: A special limited run of the Grand Trunk Western cars without the corner posts will be available.
Trucks: 70- or 100-Ton
Suggested minimum radius of 22inch
HO Diesel Detail Kit for EMD SD70ACe
Product Information
Make your WalthersMainline locos even more realistic in minutes with this Diesel Detail Kit! The complete set of HO grab irons fits the standard locations on the model, and theyre made of durable, factory-formed stainless steel wire. The set details one model and includes illustrated instructions.
Parts in this 24-piece set include:
2 Long straight grab irons for rear hood
13 Drop-type grabs for long and short hoods
1 L-shaped grab for top of long hood
2 cab brow grabs, one each left and right
3 Drop-type grabs for inverter
1 Straight grab for hood mount above inverter
2 Straight grabs for outside edges of front hood
HO NSC Ballast Hopper - Herzog (Early) #6307
1977+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO GMD-1 - DCC & Sound - Canadian National (1900s Green) #1912
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
HO FMC 4700 Covered Hopper - VUHX (3pk)
MODEL FEATURES:
- Separately-applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, -brake cylinder and triple valve
- 100-ton trucks with 36 inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
- Factory applied roof walk, roof hatch, end details, ladders, and wire grab irons
- Two outlet grate variations
- Accurately painted and printed on a highly detailed, injection molded body
- See-through etched metal end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- All 3-packs feature unique road numbers
- Minimum radius: 18 inches
HO 60ft Hi-Cube Plate F Boxcar - BNSF #761274
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline(R) 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 40Ft Fruehauf Exterior-Post Volume Van - PRR: 1960s #200578
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
HO/OO - Metal Lamp Post (3/pkg)
Add distinctive detail to your layout!
Use to light city streets, sidewalks, downtown areas, parks, bridges and more.
20mA set
HO scale dimensions - 0.875 w x 4in h (22.2 mm w x 101.6 mm h)
HO Double-Track Concrete Pointed Bridge Pier - Fits Central Valley Double-Track Truss Bridge
HO 1988 G43B Coil Svc. Gondola w/ Coil Racks (Coils Not Included) - Conrail (CR) #601833
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -1988 G43B Coil Svc.- With Coil Racks ? Coils Not Included in the now-classic Conrail red paint. This series represents the former PC-painted G43B series. Conrail maintained the lettering locations that PC did, painting the Conrail reporting marks, road number, and Conrail can opener logo in the same locations PC had stenciled them. The G43B prototype features cushion draft gear, giving the model a distinctive look compared to the other G43 classes. The top chord of the car has a -COIL STEEL LOADING ONLY- stencil to remind customers and railroad officers that the car is equipped with coil racks. Our model has coil racks too, and we sell beautifully executed steel coils for this car separately. We recommend a load of four coils if you want to replicate most prototype loading patterns ? for the size of coil we created. Yes, we did the math. These Conrail coil service gondolas are offered in 12 road numbers and feature details appropriate for these 1969-built cars.
HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - Penn Central
#51573
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO RTR 65Ft 6inch Mill Gondola - Alaska ARR #13801
MODEL FEATURES:
Working drop ends. Gently lift up & push inward to fold ends down.
Separately applied wire grab irons
Interior detailing
Decorated models fully-assembled and ready to run out of the box
Machined metal wheels and RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Minimum radius: 18inch
HO RTR PS-2 2600 Covered Hopper - MKT #1333
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - IWXX (Hunter Green) (6 pkg) #1
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
220001
220007
220008
220014
220016
220020
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Baler/Logger - Kit
Product Information
The prototypes for the Walthers Cornerstone Baler-Logger receive loose, mixed materials (or sometimes automobiles) and crushes the material into compact cubes for easy storage or transport in gondolas or by truck. Sometimes the material is piled on the ground where it can later be picked up by an electromagnetic or grapple-type crane.
While offered as an accessory for use with the Walthers Cornerstone Washington Salvage Scrap Yard kits, this Baler-Logger is an ideal addition to any industry that processes scrap metals. Scrap yards, the steel industry and economic markets are closely linked. The demand, and the price paid for scrap governs how long a yard will store or how quickly it sells its scrap. If demand or prices are low for any product, volumes for that product build up and the piles get high. When demand and prices rise, stored volumes are sold off quickly to generate a profit. Washington Salvage Scrap Yard is actually two businesses - an auto salvage business and a scrap business. Washington Salvage Scrap Yard includes easy-to-build plastic kits like the Baler-Logger. As well as cast-resin ready-to-use scenery details like junk auto piles. Check out all of the Washington Salvage Scrap Yard
and related kits!
Great detail for metal processors or industries with scrap steel
Concrete base and steel supports
Easy-to-build plastic kit
Molded in appropriate base color
Measures: 4-5/8 x 1-3/8 x 1-1/4inch (11.7 x 3.4 x 3.1cm)
HO Rotary Dumper - Kit
Keep raw materials moving along your railroad with the Cornerstone Rotary Dumper kit! Designed to unload cars without the need for uncoupling, the prototypes serve a variety of industries that require large volumes of bulk material such as coal, woodchips and limestone. Designed for easy construction, this detailed structure kit features:
- Essential detail for modern heavy industries
- Prototypes in service from the 1970s to the present
- Use with powerplants, paper mills, steel mills and more
- Highly detailed plastic parts
- Model a complete power grid with these Cornerstone kits, including the Coal Conveyor with Transfer House (#933-4171), Modern High-Voltage Transmission Towers (#933-3343), Lakeshore Energy Power Plant (#933-4172), Substation (#933-4175), Intermediate Height Wood Utility Poles (#933-4173), plus SceneMaster Utility Poles (#949-4120) and Utility Company Vehicles (#949-11636 series), each sold separately
- Kit measures: 10 x 6-1/8 x 3-1/4 inches (25.4 x 15.5 x 8.2cm)
Required depth clearance: 2-3/8 inches (6cm)
N Scale 40Ft Hi Cube Ribbed Side Container - K-Line
Product Information
Modernize your HO intermodal operations in minutes with these SceneMaster Containers, featuring:
Improved door latch detail
Great detail for terminals and industrial scenes
Realistic loads for any well car
Ready to use
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286320
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
HO ACF 50Ft 6In Boxcar - Railbox (Large Logo) #32745
FEATURES:
Prototypical non-terminating corrugated ends
Diagonal paneled roof
Single 10-foot YSD design sliding door (non-operating)
Detailed cross-member attachment rivets on the side sills
Weighted, detailed underframes
True scale dimensions with acccurate details
Equipped with AccuMate knuckle couplers
HO 73ft 3in Greenville 7,000 Cu.Ft. Wood Chip Hopper - ATSF #165077
One of the lightest loads moved by rail, wood chips require one of the biggest cars and they are easy to add to HO operations with these Walthers Mainline Greenville 7000-cubic Foot Woodchip Hoppers! Back by popular demand, features of these models include:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from early 1970s to the present
- Designed especially for moving woodchips from sawmills to paper mills
- Prototypical interior bracing
- Authentic door latch details
- Detailed brake gear
- Heavy die-cast metal underframe
- 100-ton trucks with correct 36 inch turned metal RP-25 wheels
- Proto MAX(TM) metal knuckle couplers
PRR X31A Single-Door Boxcar: Circle Keystone - Single Car #69347
Detail Variations:
Built 1934-35, as operated to approx. 1954.
6-pack includes the following numbers:
#67758
#68074
#69347
#70002
#70183
#70248
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
HO Intermountain 4-Panel Coalporter, Canadian National
CNA Website scheme
Features:
Sharp Painting and Lettering
Prototype Accurate Paint Schemes
Multiple Road Numbers
InterMountain 100 Ton Trucks with 36in Metal Wheelsets
Metal Knuckle Couplers
85Ft RTR P-S Regal Series 4-4-2 Sleeper - Santa Fe (Regal Hunt) #64
Business Train (Real Metal Finish)
Non Lighted
Product Information
Passengers on your WalthersProto Combined Super Chief / El Capitan are sure to have a memorable trip aboard the 85Ft Pullman-Standard 4-4-2 Regal series Sleepers! Santa Fe purchased 16 of these spacious sleepers fitted with four double-bedrooms, four compartments and two drawing rooms for postwar Super Chief service, which were later used on other name trains and served with Amtrak. Ready for operation or display, features of this WalthersProto replica include:
Real metal finish simulates stainless steel
Correct GSC 41-NDO Outside Swing Hanger trucks as used in the 1960s
Factory-installed grab irons
Prototypically accurate window tinting
Window gasket details as appropriate
Sprung operating diaphragms
Modeler-installed extended drawbars for 22Inch radius curves included
Turned metal RP-25 wheelsets and correct trucks with built-in electrical contacts
Proto MAX metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24Inch radius is recommended for operation.
HO MP15DC Gold - DCC & Sound w/ Ditch Lights - LTEX #1503
Features:
Three different hood styles (angled air filter box, square air filter box, standard hood)
Exhaust stacks: with or without muffler
Long hood sand fill: recessed or extended
Rear sand fill: Three variations of sand boxes behind cab
Pilot: standard or with snow plow
Additional Features:
Separately-applied scale detail parts include: windshield wipers, metal grab irons, coupler cut levers, multiple-unit hoses, snow plow, train line hoses, fine scale handrails, and more!
See through step detail on sill
Etched metal radiator grilles
Painted crew members
Factory-equipped with AccuMate knuckle couplers
Coupler pocket designed to accept AccuMate Proto-couplers
Five-pole skewed armature motor w/ dual flywheels for optimum performance at all speeds
Directional lighting with golden-white LEDs
Atlas Master Series Gold Features:
ESU LokSound decoder, supporting all DCC programming modes.
Flexible mapping of function keys F0 to F31.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor and more.
HO 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - GE Rail Services Corporation/ITLX #30320
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Prototypes in service from late 1980s to the present
- Separately molded and applied hopper gates
- Correct 36 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
HO H21E 4-Bay Hopper - Pennsylvania (PRR Black, Plain Keystone) #747892
1961+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
New York Central (silver, black)
Bridge Billboards for your Layout
Railroads once considered bridges as locations to fly the company flag, so many painted them with logos and billboard advertising. These plate-girder bridges are based on those used across the continent and each comes decorated with period railroad graphics. The layout-ready models also feature nickel-silver Code 100 rail
HO F30A 50Ft Flat Car MOW w/Deck Rails - Conrail (CR MOW) #58709
This car does NOT include sleeper or camp vans
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
42Ft Coil Steel Car - Norfolk Southern Protect III #165945
Features:
Prototypical painting and lettering
See-through walks
Removable hood
Inside floor detail
Cut-levers
HO EMD SD50 - DCC and Sound - Chessie System C&O #8561
Product Information
This WalthersMainline EMD SD50 is perfect for heavy freight service on your HO Scale railroad. As demand for higher-horsepower units and better fuel economy continued to grow in the late 1970s, EMD began testing a new six-axle model in 1979, which entered production as the SD50 in 1981. Like the prototype, this locomotive is a great addition to your railroads fleet of heavy diesel road units. The WalthersMainline SD50 has the features you want to make it a star performer on your layout!
One time run of these road numbers, order now - limited quantity available!
Prototypes in main line, regional and lease-fleet service from 1984 to the present
Updated power trucks with HT-C sideframes
Open grating on steps
Phase Two body shell with molded drill starter points for grab irons in EMD SD50-60 Diesel Detail Kit (910-256) sold separately
Correct size RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Equipped with ESU sound and DCC for use on DCC and DC layouts featuring:
4 Function outputs with brightness control by CV
Fully DCC compatible
14, 28, 128 speed steps
Dual-mode DC-DCC
4 Air horns changeable by CVs
2 Bells changeable by CVs
Same powerful drive as WalthersProto(R) locos featuring:
5-pole skew-wound motor
14:1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Dual machined brass flywheels
Heavy die-cast metal chassis
Constant and directional LED headlights
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
HO Alco FA-1 - DCC & Sound - Canadian Pacific (Block Scheme) #4008
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
Tortoise Edge Card Connector - 2020 Update w/Wider Connection (1/pkg)
This Tortoise Edge Card Connector fits the Tortoise Switch Machine. Designed for a snug fit without shims, the edge connector provides locations for the solderless connection of wires for control of electrical devices connected to the Tortoise turnout motor.
HO 37ft General American Meat Reefer - Oscar Mayer (Largo Logo) #66072
Rapidos 37ft Meat Reefers Feature:
- Complete underbody with all piping
- Super-detailed Barber S-1 trucks
- (Insulated turned blackened metal wheelsets)
- Accurate roof hatches and hardware
- See-through brake platforms
- Separate grabs, ladders and roofwalk
- Accurate paint schemes
- Multiple car numbers per scheme
- Factory-installed Macdonald-Cartier couplers
- Available in singles or multi-packs.
HO 3200 Gallon Fuel Tank Set - EMD
NYC As Delivered (963H) - In Service 1965
Car Number: 885893
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
F30A 50Ft Flat Car: Conrail MOW #59727
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
HO H21E 4-Bay Hopper - Pennsylvania (PRR Black, Plain Keystone) (6pkg)
1961+
6-Pack includes the following numbers, all individually packaged: #746460, #746647, #746983, #747504, #747892, #748099
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
N Scale AutoFlood III RD Coal Hopper - UP/CMO #504318
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO ACF 2970 Covered Hopper - ACFX #44520
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons, stirrup steps and brake wheel
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Screw-mounted express-type trucks
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO 70-Ton 12-Panel Hopper - Conrail #435622
Blt.6-60
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
SPFE #459898
Fully assembled and ready for your layout
Razor sharp printing and painting
Weighted for optimum performance
McHenry scale knuckle spring couplers installed
Machined RP25 profile 33In metal wheels with RP25 contours operate on all popular brands of tack
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18In
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Chesapeake & Ohio C&O #5001
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Plastruct 90121 Brass Insert Wire .045 (10pcs pkg)
SCALE
ALL
MATERIAL
BRASS
OUTSIDE DIAMETER (O.D.)
0.45
1.1mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
HO NSC 5304 Boxcar - Canadian National (Delivery w/ Green Door) #557606
The Rapido NSC 5304 cu.ft. CN Combo Door Boxcar features:
Separate grab irons installed at the factory
100-ton Barber S-2 trucks, with metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe
Talus - Fine Natural (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings and or road cuts. Intermix grades and blend shades for the most realism. Color Natural Talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle Talus and secure with Scenic Cement (#191).
Particle size- Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
HO Pressureaide Covered Hopper - ACFX (Conspicuity Stripes Venturi) #51405
(white, blue, Conspicuity Stripes Venturi)
Tru Color Paint - Acrylic - BNSF Green - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - KRRX #4719
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Code 100 Streamline Large Radius, Electrofrog
Nominal radius 1524mm, angle 12 degrees, length 258mm
HO RTR FMC 3-Bay 4700 Covered Hopper - Klemme Coop #182919
Detailed Information
MODEL FEATURES:
Separately applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, brake cylinder and triple valve
100-ton trucks with 36inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
Factory applied roof walk, roof hatch, end details, ladders and wire grab irons
Two outlet grate variations
Accurately painted and printed on a highly detailed, injection molded body
Window packaging for easy viewing
Minimum radius: 18inch
See-through etched metal end platforms
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Interior plastic blister safely holds the model for convenient storage
All 3-packs feature unique road numbers
RS-18u, DCC & Sound - Ontario Southland #181
Era:2006-Present
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
12inch Long Round Aluminum Rod - 3/8 inch Diameter
Round Aluminum Rod - not hollow (1 pc)
Outside Diameter: 3/8 inch
HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Early Yellow) #475264
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
HO Scale 89ft Channel Side Flatcar - Trailer-Train #151360
(yellow, black; 40ft Trailer Service)
Built especially for the bigger trailers entering service in the 1960s, this Walthers Mainline model of the 89ft channel side flatcar is a must for period intermodal modeling in HO scale. Based on the F89F flatcars owned by Trailer Train and many railroads, over the years these cars carried 28, 40, 45, 48, and 53ft trailers.
FEATURES INCLUDE:
- One time run of these road-numbers, limited quantity available!
- Heavy die-cast metal underframe for great performance empty or loaded
- Used in piggyback and other service 1963 to the present
- Prototypical C-shaped steel channel side sills
- Detailed brake gear
- Swinging coupler pocket for 18 inch radius curves
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 50ft Ext-Post Hi-Cube Plug Boxcar - AOK #14118
MODEL FEATURES:
- Separately applied brake wheel and stirrups
- Highly-detailed, injection-molded body
- Metal wheels with RP25 contours operate on all popular brands of track
- Minimum radius: 18 inches
N Scale AAR 40ft Steel Boxcar - Ready to Run Silver Series - Wabash
Product Information
This Bachmann Silver Series AAR 40ft Steel Boxcar is based on cars used for moving all kinds of freight that needed protection from theft and weather. These durable 40ft steel boxcars were once a common sight on railroads large and small. features a detailed injection-molded body with applied roofwalk, realistic decoration, metal wheels and E-Z Mate magnetic knuckle couplers.
HO AutoFlood III RD Coal Hopper - PGNX #1202
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO EMD SD70ACU - DCC Ready - Canadian Pacific CP (Grey, Red, Black) #7022
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
HO 1960s & 70s Yard Crewmen (6pk)
Bring scenes along your HO layout to life with this set of six SceneMaster figures! Perfect for period yard scenes or out on the mainline, the set includes six layout-ready figures, molded in realistic poses and finished in authentic colors.
Add-On Wall Section - Blue - For Most Kits - 20 Scale Feet Long
Molded in blue and white, use these parts to extend the length of most Pikestuff Kits. Wall sections measure 20 scale feet wide (2-3/4in). Includes two wall and roof sections, plus concrete foundation and glue strips.
Fine Turf - Yellow Grass - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
HO Norfolk Southern G41A Repaint 1976 w/o Hoods PRR Shops G41A Coil Car
NS GP67 Repaint 2005+ is an exciting release for us. NS rebuilt some of their G41A cars around 2000 and placed them in the GP67 class. These rebuilds were changed from 6 troughs to 5 troughs to accommodate larger diameter coils. This major change, along with yellow trough bracing, makes these cars really stand out in the crowd. The Tangent offering picks up in 2005+, where the NS cars have received their conspicuity stripes. The troughs received not-so-subtle wide white stripes down the centerline of the car to assist loading. If you read the data carefully, you will find accurate 50 Year Life Extension stenciling and painted diamonds labeling the cars for HOT steel coil service. The 125-Ton trucks feature NS reporting mark and car numbers along with 38in wheels and rotating Timken caps. These are some HOT cars for the modern era.
SPECIFICATIONS:
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
N Scenic Accent Figures - Black Angus Cows (11pcs)
Black angus cows and calves, in various poses, hang out in the pasture!
HO RTR ACF 2970 Covered Hopper - Winchester and Western (W&W) (3pkg)
Detailed Information
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons and stirrup steps
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple road numbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
N Scale 100-Ton 3-Bay Ribside Open Hopper w/Tarps 4-Pack - (FOAM) - SOO Line
60839, 60853, 60867, 60899
Product Information
A coal train standard from the 1960s on, cars feature an injection-molded body, realistic load, fine paint and lettering and Magne-Matic(R) magnetic knuckle couplers.
HO 1973 Peterbilt 359 Sleeper-Cab Tractor - Red, Yellow
This HO Scale 1973 Peterbilt 359 Sleeper-Cab Tractor by Brekina is based on the workhorse long-distance semi tractor of the 1970s and 1980s. This detailed model features an injection-molded plastic body with fine decoration, interior seats, window glazing and chrome-plated parts as appropriate.
HO 50Ft FMC 5283 DD Boxcar - Canadian National #555054
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Positionable sliding double doors
Body-mounted McHenry operating scale knuckle couplers
Painted and printed for realistic decoration
Precision machined metal wheels
Highly-detailed, injection molded body
Weighted for optimum performance
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
Peel n Place Tufts - Medium Green Grass
The Woodland Scenics Peel n Place Tufts allow you to model a variety of grassy plants often found in fields, meadows and pastures. Available in several styles of grasses and flowers, these tufts are ready-made and can be used right out of the package. Simply peel the tufts from the tray and place them where desired. Combine Peel n Place Tufts with other Woodland Scenics scenery materials to enhance your layout.
0.025 inch Thick Brass Flat Sheet - 6x12inch
Brass Flat Sheet 6inch Wide x 12inch Long (1 pc)
15 x 30cm
HO - AAR Hopper - Grand Trunk Western - #111625
This ready-to-run HO Scale 70-ton AAR 3-bay hopper car is factory decorated for Grand Trunk Western in the as-delivered mineral red scheme. Build date is 12/52 with NEW weigh date, pack date, and brake test date also in 12/52. Model features wire grab irons, metal wheelsets, metal knuckle couplers, interior bracing, and removable coal load. Graphics were created by Smokebox and have been intricately reproduced, including builder's logos and brake cylinder stencils.
This Smokebox Graphics Exclusive is a limited production with only 75 of each number available.
The car number for Item 8132 is GTW 111625.
Trinity 3-Bay Hopper - BORX #500107
ETA: October 2021
Detailed Information
MODEL FEATURES:
Two body styles represent 10-panel and 12-panel variations
New body styles N including BNSF with stiffeners
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Coupler cutbar and Air hose on each end
Separately applied end cages and etched end platforms
Photo-etched metal roofwalk
Weighted for trouble free operation
Machined metal wheels
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Standard size coupler draft gear box with screw mounted lid
Fully assembled and ready for your layout
Replacement parts available
Minimum radius: 18inch
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
PROTOTYPE AND BACKGROUND INFO:
Trinity Steel was founded by C. J. Bender in Dallas in 1933. The company didnt enter into the railroad freight car market until 1984, when Trinity acquired the railcar designs and production facilities of the Pullman-Standard Car Manufacturing Company, once the largest railcar manufacturer in North America. That same year Trinity also acquired the railcar designs of General American Transportation Corporation. In 1986 the rail car designs and production facilities of Greenville Steel Car Company were purchased, including the auto rack designs of Portec-Paragon. Also acquired in 1986 were the railcar designs of North American Car Corporation, and in 1987 Ortner Freight Car was acquired.
With this collective experience across several facilities, Trinity developed many new designs that became ubiquitous to present day railroading. One of their most famous designs is the 3-bay 5161cuft covered hopper. This covered hopper is optimized to transport agricultural products, sugar, dry chemicals, or other similar products and can be seen in unit train assignments all over North America. Introduced around 1995, these cars are extremely common today and owned by many Class 1 and short line railroads alike.
HO Bay Window Caboose - DCC Ready w/Lights - Western Pacific #485
ETA: January 2023
Detailed Information
The ultimate detail with the best Genesis features.
International Car Co. began specializing in caboose production as early as 1941. When the railroads entered the 1960s, many needed to replace their aging, in some cases home shop built, cabooses. International Car responded with a product that could be tailored to each railroads specific needs. Using quality components and modern engineering, ICC became a leading name within the industry.
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
WP 481 SERIES FEATURES:
WP 481 Class caboose
Air whistle (Functions in DCC)
Functioning marker and interior lights in DCC
WPs last order of new cabooses came from International Car in 1980. Of the six cars in this order only one of them, #482, had the WP letters printed on each end of the car. All six came with roof-mounted fire cracker style antennas.
ICC CABOOSE FEATURES:
Better than brass detail including roadname and road number specific detail Laser-Sharp Painting and Printing
Interior seating for the addition of crew figures.
Flush Window Glazing
Wire-form Grab Irons
Caboose trucks with animated rotating bearing or static friction bearing caps
Axle Generator Details
Body-Mounted McHenry scale knuckle-spring Couplers
Fully assembled and ready-to-run out of the box
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Separate wire form grab irons, etched metal coupler platforms
Coupler lift bars, trainline hoses, brake hoses, and hardware
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Weighted for optimum performance
Window packaging for easy viewing, plus interior plastic blister safely holds the model for convenient storage
Multiple Road numbers
Minimum radius: 18inch
LED LIGHT EQUIPPED FEATURES:
LED lighting for long life and reliable operation
On-board DCC Decoder by NCE
Operates in DCC and Analog (DC) with lighting Functions Controllable in DCC
Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era (not all cars have marker lights)
LED Interior Lights
All functions NMRA compatible in DCC mode
9-pin to DCC Medium Plug - Short Harness (1 inch)
N Budd RDC-1 (Ph 1) - DC/Silent - Painted, Unlettered
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height
Code 83 Crossing - Nickel Silver w/Brown Ties - 30 Degrees
also includes four 1inch straight sections
Note - package was opened but was not used in layout
HO Scale NSC 73Ft Centerbeam Flatcar - Trailer Train (TTZX) #861209
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
Trinity 3230 Covered Hopper - Chicago Freight Car #3092
FEATURES:
All new tooling
Ready to run
Injection molded plastic
Fine scale detail
Separately applied wire grab irons
Separately applied wire cut levers
Etched metal roofwalks
Crisp painting and printing
HO Elevator Add-on Silos - Kit -
This kit measures: 9 x 4-1/2 x 9 in (22.8 x 11.4 x 22.8cm)
This Cornerstone structure kit provides parts to build four matching concrete silos for the ADM(R) Grain Elevator (933-3022 sold separately) and lengthen the corrugated metal headhouse.
HO 50Ft Ex-Post Mechanical Reefer - CPR #286280
Detailed Information
MODEL FEATURES:
Body-mounted McHenry operating scale knuckle couplers
Fully assembled and ready-to-run
Precision machined metal wheels
Wheels with RP25 contours operate on all popular brands of track
Painted and printed for realistic decoration
Weighted for optimum performance
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 15inch
HO RTR ACF 4650 3-Bay Hopper - Norfolk Southern #251097
Date: 8-92
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO TM High-Cube Container - DSEU, Set #2
Contains Numbers: 70459, 70899, 70385, 70150
MASTER MODEL FEATURES:
Prototypical paint schemes
Simulated forklift pockets
Detailed chain securement
Fire port on one side
HO Horizon Coach - Amtrak (Phase Vl) #54511
PHASE SPECIFIC FEATURES:
- 68-seat coach interior
- Modified parlor end-doors
- Fixed end-door steps
GENERAL FEATURES:
- Coach, Dinette, Club-Dinette car body styles
- All-new ADA Coach cars
- All-new car numbers
- Full underbody and interior detail
- Correct GSI G70 trucks with metal wheelsets and reliable power pickup
- Accurate painting and lettering
- Tinted windows
- Improved interior lighting in both DC and DCC
- Independently-controllable end marker lights
- Metal side grab irons
Athearn Genesis HO 13,600 Gallon Acid Tank Car, Chevron #687000
Athearn Item #: ATHG25646
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Two different body phases (early and late)
Many separately applied details
Etched metal walkways
Different top platforms as appropriate per prototype
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18in
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry (TM) scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Athearn - N Scale 2 Bay 2600 Covered Hopper - Winchester & Western - #4007
Flush or overhanging roof per prototype
Etched metal roofwalks
Factory installed wire roofwalk grab irons
McHenry knuckle spring couplers installed
Weighted for optimum performance
Accurately painted and printed for prototypical realism
Minimum radius: 9 3/4"
HO Canadian National ex IC 50Ft Boxcars - 1990+ - Waterslide Decals
Description: HO scale - Illinois Central (IC) Canadian National ex IC 50Ft Boxcars Circa 1990+
Walthers SceneMaster All Scale - Tear and Plant Bushes - Dark Green
Measures 7-7/8In x 9In 20 x 23cm
Product Information
SceneMaster ready-to-use Tear and Plant products are perfect for adding grass in large areas. Available in a variety of styles and seasonal colors to add realistic vegetation to any layout from Z to G Scale, ready-to-use mats are flexible to fit uneven terrain and are easily cut or torn to fit available space. Use Tear and Plant Grass Mats along with other SceneMaster scenery materials to add realism to your layout!
Realistic plants in minutes - requires no special skills!
Easily cut or torn into smaller pieces or to fit available space
Great for adding a realistic variety of plants to any area
Flexible for easy use on uneven terrain
Ready to use
Varied colors and flocking for added realism
Flexible transparent base blends into existing scenery
HO FM H-24-66 Train Master Phase 2 - Silver DCC Ready - CP Rail #8911
Separately-applied door handles
Real metal springs on trucks
Realistic die-cast underframe
Five-pole skewed armature motor with dual-flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate? couplers
Painted crew figures
Separately-installed fine scale handrails
Etched metal radiator grilles
Electronic Dual-Mode Decoder (e-DMD) (Gold Series only) that allows your locomotive to run in DCC or DC
NMRA 8-pin plug for DCC (Silver Series only)
Railroad specific details (Lighted classification lights on some models
Atlas Master? Series Silver Additional Features:
NMRA 21-pin plug for DCC (Decoder-ready)
Sound Features for Gold Series :
(DCC Operation)
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F31 .
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes ?on the fly? are provided for true realism.
AccuMate? couplers are made under license from AccuRail, Inc.
Silver Sound Ready
HO 3-Stall Modern Roundhouse - Kit
Product Information
The Walthers Cornerstone 3-Stall Modern Roundhouse will be a hallmark of later steam-era railroading on your HO layout. If you model the diesel era youll also find this kit to be a centerpiece of your servicing facility since some of these classics are still used today for servicing diesels. No matter the weather, workers could easily inspect and service locos under cover. Size was based on the number of engines coming and going in any 24-hour period, with the busiest terminals requiring full-circle roundhouses.
This detailed 3-Stall Modern Roundhouse model includes three stalls on 10-degree centers to make the most of your available space like the prototype. And with a modular design, you can add as many stalls as your railroad requires using the Modern Roundhouse Add-On Stalls (933-2901, sold separately). For more realism, interior and exterior brick wall details, fine windows, floor inspection pits and much more are all standard. Locos up to 125 scale feet long fit easily inside the 3-Stall Modern Roundhouse and parts for a single 145 foot long stall are also included as many modern roundhouses were expanded to handle large locos like Mallets.
Authentic North American prototype
Holds engines up to 125 scale feet long
Includes stall for bigger engines up to 145 scale feet long
Modular design - easily expanded to a full circle
Compact 10-degree stall spacing
Interior and exterior brick detail
Fine window details
Floor inspection pits
Decal signs included
Model a complete engine terminal scene with related Cornerstone HO Scale railroad buildings.
As shown the Modern Roundhouse measures: Standard Building: 17-3/4 x 16 x 5-1/2inch (44.3 x 40 x 13.7cm) With Extended Stall: 20-1/8inch (50.3cm) Long Pit Depth: 5/16inch (.78cm)
53 Ft CIMC Containers - Exel (3 pack) #1
Era:2007+
MODEL FEATURES:
-Fully assembled
-Newest horizontal rib front
-Easily stackable
-Separately applied door closure rods
-Each container individually numbered
-Razor sharp printing and painting
HO The Shops w/Add-On Office - Kit
This kit is designed with cut lines on the back side of the walls so that door and window locations are optional. Kit includes doors, windows, roof vents and down spouts.
Dimensions: 70 X 80 Scale Feet / 9-11/16 X 11-1/16 inches
Centerline between doors: 20 Scale feet. 2-3/4 inches
HO 4750 Cubic Foot Rib-Sided 3-Bay Covered Hopper - Klemme Coop #4247
These ready-to-run cars feature injection-molded bodies with separately applied metal grab irons and etched metal roofwalks! Cars include trucks and brass wheelsets, weights and Kadee #5 magnetic knuckle couplers.
HO 50ft PS-2 CD 4427 Covered Hopper - Northern Pacific #76290
Add a signature car to your covered hopper fleet with the Walthers Mainline 50ft Pullman-Standard PS-2 CD 4427 3-Bay Covered Hoppers!
Fully assembled and finished in a variety of colorful schemes perfect for 1960s to early 2000s layouts, features include:
-Limited edition - one time run of these car numbers!
-Prototypes handled all types of grains, feed and similar loads
-Matches prototype dimensions
-See-through running boards
-4-3-4 exterior rib pattern
-Bottom outlet gate details
-Placard name plates as appropriate
-Correct 36in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO Peterbilt 389 Sleeper Cab Tractor w/Pneumatic Bulk Trailer - First Class Services
(red, white, chrome)
HO EMD SD9 - DC/Silent - Burlington Northern #6229
Burlington Northern
- Former CBQ units (Phase IV, first time for a plastic model!)
- Correct 5-step, BN walkway
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO 89Ft Bethlehem Flush-Deck Flatcar - TTX WTTX #157939
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers
HO 40ft 16K Gallon Tank Car - Tru Sweet/UTLX #75845
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Sinclair Antennas (2pcs)
4 x 6 x 2-1/16 inch - 10 x 15 x 5.8cm
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1808
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
N Budd RDC-1 (Ph 2) - DC/Silent - BC Rail (Blue)
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height
HO EMD FT A+B Set - DC/Silent - Reading (Black & Green) #258A + 258B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
G2 SD70M-2 - DCC Ready - Norfolk Southern #2675
Genisis 2.0 Features:
See-through pilot steps, Lit Marker Lights (CN)
LIT numberboards & ground lights
Detailed Information
NS FEATURES:
Alternate PTC roof included in box
NS NOTES:
126 EMD SD70M-2s were delivered to NS in 2005 and 2006. Consistent with NS practice at the time, the units were rated at 4000 horsepower instead of the typical 4300. The units were equipped with ditch lights on each end and used in heavy mainline service.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Etched see-through steps
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
HO CA-8 Late Caboose w/Lights w/DCC & Sound - Union Pacific #25509
ETA: August 2021
Detailed Information
Union Pacific CA-8 Caboose FEATURES:
Caboose trucks with swing arms, friction or animated roller bearing bearing caps as prototype appropriate
Various safety slogans, in both early banner style with green lettering and late vinyl decal with special graphics
Sliding cupola side windows
Cupola-mounted marker lights when appropriate
25576 is offered in an early CA-8 Pool service configuration
HO EMD GP35 Low Nose - No-Sound / DC - Chesapeake & Ohio #3529 (blue,yellow)
This HO Scale Stealth Series EMD GP35 from Broadway Limited is based on the ubiquitous EMD GP35 4-axle diesel-electric locomotive built by EMD and subsequently General Motors Diesel in the mid 1960s. Over 1300 of these locomotives were produced, and they were operated by virtually every major railroad in the United States. Addtionally 26 units were built for Canadian railroads and another 57 units were built for Mexican railroads. These freight locomotives were powered by EMD 567D3A 16-cylinder engines that generated 2500 horsepower.
This Stealth Series no-sound/DCC-ready model operates on DC out of the box, or a modeler can easily install their DCC decoder of choice. Out of the box, front and rear lights are directional, and other lights are always ON with track power. Additionally some lighting functions may be missing depending on selected aftermarket decoder the modeler installs. This model includes a 21-pin decoder socket so you can add your favorite DCC or sound decoder when you're ready. It also features a built-in speaker so you won't have to add one later. Other features include a heavy die cast chassis and select roadname-specific details. Its wheels profiled to operate on Code 70 and larger rail and curves of 18" radius but larger curves are recommended. The EMD GP35 is one of many Broadway Limited HO Scale Paragon4 locomotives.
ZipZ(TM) Connection System - For Tortoise(TM) and SMAIL(TM) - Kit (6pk)
Now layout wiring can be easily connected to the ZipZ terminal block and then the edge connector simply slides onto the TORTOISE or SMAIL circuit board. No soldering necessary to the machine. ZipZ also fits the older TORTOISE circuit boards (the tan ones).
Available in a single piece package, a cost saving 6 pack and for even more savings, a 6 piece do-it-yourself kit version where soldering IS required...but not to the switch machine!
NOTE: Comes as a kit of 6.
Parts Only...Soldering Is Required.
N Scale 2-Bay Hopper - Penn Central #74216 (Weathered, Jade Green, small logo)
These GA-105-class covered hoppers with Bettendorf trucks were built in 1957 in a series of 500 cars.
HO EMD SD9 - DC/Silent - Chicago, Burlington & Quincy #834
-white frame
Chicago, Burlington & Quincy
- Phase IV (First time for a plastic model!)
- Higher short hood with a corresponding cab height
- Cornered-off section on the long hood behind the cab
- Two 48inch radiator fans as opposed to the normal (four) 36inch fans
- Conduit pipes were removed from the top of the radiator
- No ladders on the short hood end
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Drill Bit #78 - 0.016inch Diameter (2 pkg)
Product Information
Walthers Drill Bits are the right tools for all kinds of hobby projects, from detailing locomotives and cars, to scratchbuilding, wiring and more. Theres a full range of common wire gauge - jewelers drill bit sizes from number 80 to 43, and each pack includes two ready-to-use bits. Walthers miniature hardware is a complete range of ready-to-use parts and tools for hobby projects, including wood, machine and nylon insulating screws, plus appropriate hex nuts and washers, in assorted standard sizes (machine and wood screws may be brass or brass plated). Drill Bits are part of the line of Walthers miniature hardware and tools.
LOCOMOTIVE FEATURES:
CN “website†scheme
CN style plow
Correct trucks per road number
Forward and reverse ditch lights
Nathan K3L horn
#5606/#5617
Early EMD trucks
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
HO GMD SD40-2 - DCC & Sound - Canadian Pacific: Golden Beaver #5778
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO Alco FA-1 & FB-1 Set - DCC & Sound - Canadian Pacific (Block Scheme) #4026, 4415
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
All Scale Layout Wire - 50Ft (15.2m) - Red
Product Information
Atlas Layout Wire is 20 gauge stranded copper wire and is great for general use on layouts in any scale. Its available in five colors that match the 5-Conductor Ribbon Wire 150-312 (sold separately). Each reel has 50Ft 15.2m of wire. Layout Wire is part of the line of Atlas electrical accessories and lighting.
Angus Van: Ontario Northland - Chevron #125
The Angus Van features:
Super-detailed underbody including all separate air and brake piping
Super-detailed Barber-Bettendorf caboose trucks
Full multi-coloured interior with proper floor texture
Interior handrails and opening windows in the cupola
See-through, etched metal end platforms and steps
Full end detail, including uncoupling levers
Separate grab irons installed at the factory
Improved, full interior lighting with all-wheel pickup and better rolling trucks
Operating red marker lights
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
HO 60ft NSC 5150 3-Bay Covered Hopper - Union Pacific #90725
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Right Hand - Ho Scale
Cut Stone - Double Track
Tunnel Portals are high density Hydrocal castings that are easy to stain with Earth Color Liquid Pigments. Hydrocal is a product of US Gypsum.
HO GE Dash 9-44CW - DCC & Sound - Burlington Northern Santa Fe (BNSF Heritage I) #960
BNSF FEATURES:
High-mounted number boards
K3 horn
Front ditch lights
ATSF -Gullwing- cab
Standard brass bell
Part of the first new BNSF locomotive order to be painted in the then new official corporate colors, these -Heritage- GE units became affectionately known by railfans as -Pumpkins- based upon the Great Northern colors used on some early diesels. Some are still running today in this scheme.
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
STEEL MILL BOTTLE CAR KIT
Bottle Cars are an integral and unique piece of rolling stock for the steel industry. This Kit, originally created in cooperation with Dean Freytag and Railroad Model Craftsman (RMC), allows custom construction of 2 12-wheel Pollock Bottle Cars. Kit instructions are actually the RMC article originally published in November, 1994. A must for every layout incorporating a steel mill.
TRUCKS, COUPLERS AND HARDWARE NOT INCLUDED.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15110
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Scale 80s GMC Brigadier Dump Truck Kit
This 1980s Era GMC is ready for your material moving needs. Precision cast pewter wheels, tires and details combined with a resin cab and dump bed are designed for easy assembly and painting. Clear parts enhance the finished model. Windshield panels are laser cut and the kit includes photo-etch details. Put this short hood 9500 muscle to work delivering bulk material on your pike. Detailed instructions can be viewed by visiting the Showcaseminiatures.net website
HO Code 83 Nickel Silver DCC-Friendly Curved Turnout - 20 and 24inch Radius- Right Hand
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 83 rail!
Combining great looks and great performance in a complete system, each item comes fully assembled and features:
-Thin profile ties in realistic dark brown with enhanced wood grain detail
-Fine profile molded spike and tie plate details on each tie
-Spike-mounting holes positioned next to the rail
-Molded starter points on underside of ties for fasteners
-Custom formulated nickel silver rail for outstanding electrical conductivity
In addition to these details, each DCC-friendly Code 83 Turnout features:
-Snap-action points
-Solid rail points for better conductivity
-Isolated frogs with built-in jumper for powering as desired
-Current jumpers entering and leaving the frogs
-Insulated tie bar
5-1/2in Long, Cut #2 Needle File - Round, Carded File (1pc)
40Ft Corrugated Container NYK Logistics 2pk
NYKU #839280(1) , NYKU #829986(0)
CR #892129
MODEL FEATURES:
Round hatches or trough hatches
Painted and printed for realistic decoration with multiple road numbers
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Separate brake wheel
Weighted for trouble free operation
Machined metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
The 4-bay covered hopper first entered service in the 1960s. The cars handle loads such as diatomaceous earth, plastic pellets and similar bulk commodities. In the 1960s, American Car and Foundry introduced the Center Flow design. The Center Flow relies on the cars rounded body to provide structural strength without the added weight of bracing, as well as making gravity unloading easier. This 4-bay car came in a 5,250-cubic foot capacity.
HO PS 40ft Boxcar w/7ft Door - Southern Pacific (Delivery 1950+) #102176
Product: Pullman-Standard Southern Pacific Lines Postwar 40ft6in Box Car with 10ft Height and 7ft Doors
Scale: HO Scale 1:87.1
Truck: Tangent ASF 50-ton A-3 Ride Control trucks
Wheels: 33 inch wheels, with front and back detail and accurate tapered axles
N Scale 52Ft Mill Gondola - CEFX (3pkg)
Detailed Information
MODEL FEATURES:
Body-mounted McHenry knuckle couplers installed
Fully assembled and ready for your layout
Screw mounted trucks for accurate tracking
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO ALCo RS-3 - DCC Ready - CN (Green) #3038
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
Bells for Diesel Locos (Brass Castings) - Hood/Switcher Unit Style in Bracket
Trinity 3-Bay Hopper - AMDX, pkg(3) #1
ETA: October 2021
Detailed Information
MODEL FEATURES:
Two body styles represent 10-panel and 12-panel variations
New body styles N including BNSF with stiffeners
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Coupler cutbar and Air hose on each end
Separately applied end cages and etched end platforms
Photo-etched metal roofwalk
Weighted for trouble free operation
Machined metal wheels
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Standard size coupler draft gear box with screw mounted lid
Fully assembled and ready for your layout
Replacement parts available
Minimum radius: 18inch
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
PROTOTYPE AND BACKGROUND INFO:
Trinity Steel was founded by C. J. Bender in Dallas in 1933. The company didnt enter into the railroad freight car market until 1984, when Trinity acquired the railcar designs and production facilities of the Pullman-Standard Car Manufacturing Company, once the largest railcar manufacturer in North America. That same year Trinity also acquired the railcar designs of General American Transportation Corporation. In 1986 the rail car designs and production facilities of Greenville Steel Car Company were purchased, including the auto rack designs of Portec-Paragon. Also acquired in 1986 were the railcar designs of North American Car Corporation, and in 1987 Ortner Freight Car was acquired.
With this collective experience across several facilities, Trinity developed many new designs that became ubiquitous to present day railroading. One of their most famous designs is the 3-bay 5161cuft covered hopper. This covered hopper is optimized to transport agricultural products, sugar, dry chemicals, or other similar products and can be seen in unit train assignments all over North America. Introduced around 1995, these cars are extremely common today and owned by many Class 1 and short line railroads alike.
HO Laser-Cut Acrylic Wheel Mask for Kadee 33 Inch Wheels
These paint masks are precision cut to fit popular high quality HO scale wheel sets. It not only keeps paint off of the wheel treads leaving just the front and back wheel faces and axle exposed for color, but keeps the modeler?s hands clean as well. The mask will hold four axles and, once painted, each of its fingers can be individually pulled apart to release one wheel set at a time. Unlike cardboard masks, these will last for years! The mask is easy to assemble from 5 clear acrylic parts; a plastic solvent glue is all that is required.
HO 40Ft Boxcar w/ Early Improved Dreadnaught Ends - Great Northern (Chinese Red) #21901
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
N Scale 40Ft Hi Cube Ribbed Side Container - Mitsui OSK Lines
Product Information
Modernize your HO intermodal operations in minutes with these SceneMaster Containers, featuring:
Improved door latch detail
Great detail for terminals and industrial scenes
Realistic loads for any well car
Ready to use
N Scale GATC 2600 Airslide Hopper - GACX #42385
MODEL FEATURES:
- Detailed underbody including outlet piping
- Rectangular or oval shaker brackets
- Gravity or gravity-pneumatic outlets
- Machined metal wheels
- Factory installed wire grab irons and brake piping
- Separately applied round roof hatches and brake wheel
- Roller bearing or Bettendorf trucks
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed
- Highly detailed, injection molded body
- Weighted for trouble-free operation
- Body mounted McHenry operating scale knuckle couplers
- Clear plastic jewel box for convenient storage
- Operates on all popular brands of track
- Minimum radius: 9-3/4 inches
Norfolk Southern #7228
EMD SD80MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Models equipped with marker lights will be illuminated
Rubber MU hoses for durability
All New Tooling
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
See through steps
Illuminated ground lights
Front and Rear Illuminated Numberboards
Presenting EMDs 5,000HP 6-axle diesel in a whole new level of authenticity. Starting in 1995, EMD revived the 20 cylinder engine design, last seen in the SD45, and introduced the 5,000 HP SD80MAC. Athearn is pleased to announce this locomotive in Genesis 2.0.
NS FEATURES:
Illuminated Ditchlights alternately flash per prototype w/ effect on DCC+Sound version
#7228:
Ex CSX unit with walkway mounted digital fuel gauge
Ex CSX style roof and antennas
Cab marker lights plated over.
Rear marker lights present & painted over
Equipped with RS-3L air horn.
LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE:
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
GP15-1 - DCC Ready - Burlington Northern Santa Fe No.1478
In the mid-1970s EMD developed the new GP15-1 model in an
effort to offer their customers a replacement for their medium sized
road switchers which were wearing out. Many railroads (i.e. ATSF,
SP & ICG) were rebuilding their older road switchers and EMD
wanted to offer them a different option. Unfortunately there were not
a lot of takers and only 310 units were built for US railroads. This
small 1,500 horsepower unit came with a radiator intake section
similar in appearance to the special one that EMD was using on
the larger SD40/45T-2 models being produced for the Rio Grande
and Southern Pacific to alleviate overheating issues in their many
tunnels. Railfans dubbed these lager units Tunnel Motors which
led to the smaller GP15-1s receiving the moniker -Baby Tunnel
motors.- Many GP15-1s remain in service today for major Class 1
railroads, regional railroads and shortlines.
BNSF FEATURES:
Ex- SLSF units
Front and rear ditch lights
Spare knuckles on rear pilot
Friscos 25 GP15-1 units became a part of the BN system in 1980, and many survived to see the BNSF merger as well. Only one unit is known to have received BNSF orange and green paint; the others wore faded coats on BN green paint for the rest of their service lives.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED bulbs for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
ROAD NUMBER SPECIFIC FEATURES:
No.1481
Primed for Grime unit in BN paint
Leslie RS3L horn on cab
88in Nose with blanked gyralight
Front snowplow
Large and small firecracker antennas; Era Late 1990s+
No.1495
Primed for Grime unit in BN paint
88in Nose with BNSF-style headlight; blanked cab headlight
Nathan K3LA horn on long hood
Large and small firecracker antennas; Era Late 1990s+
No.1478
Full BNSF H1 paint
88in Nose with BNSF style headlight; blanked cab headlight
Leslie RS3L horn on long hood
Whip and small firecracker antennas; Era Late 1990s+
HO ICC Caboose w/Lights - DCC Ready - Seaboard #5663
ETA: April 2022
Detailed Information
The ultimate detail with the best Genesis features.
International Car Co. began specializing in caboose production as early as 1941. When the railroads entered the 1960s, many needed to replace their aging, in some cases home shop built, cabooses. International Car responded with a product that could be tailored to each railroads specific needs. Using quality components and modern engineering, ICC became a leading name within the industry.
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
Seaboard Air Line FEATURES:
Each caboose has a different safety slogan
Friction Bearing Trucks
Separately applied non-functioning marker lamps included
ICC CABOOSE FEATURES:
Better than brass detail including roadname and road number specific detail and laser-sharp painting and printing
Interior seating for the addition of crew figures.
See-through end platforms and steps
Flush window glazing
Wire-form grab irons
Caboose trucks with animated rotating bearing or static friction bearing caps
Axle generator details
Body-mounted McHenry scale knuckle-spring Couplers
Machined metal RP25 profile wheel sets
Fully-assembled and ready-to-run out of the box
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Separate wireform grab irons, etched metal coupler platforms
Coupler lift bars, trainline hoses, brake hoses, and hardware
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Weighted for trouble-free operation
Multiple road numbers
Minimum radius: 18inch
LED LIGHT EQUIPPED FEATURES:
LED lighting for long life and reliable operation
On-board DCC Decoder by NCE – Operates in DCC and Analog (DC) with lighting functions controllable in DCC
Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
(not all cars have marker lights)
LED Interior Lights
All functions NMRA compatible in DCC mode
HO Cooter's Liquor - Hydrocal Casting Kit
Beer, wine, lottery tickets, & girlie mags, what else could a guy need? This kit would look great next to the tattoo parlor or strip club. Includes very cool stucco/brick castings, full color signs and complete assembly, painting & ageing instructions.
DIMENSIONS:
4 x 4-1/2 inches.
HO FMC 5503 Double Door Boxcar - St. Maries River Road #52032
Features:
Double Sliding Doors
Wire grabs
Etched parts
Plate C Box Car
X-Panel Roof
HO 89Ft Bethlehem Flush-Deck Flatcar - TTX RTTX #159075
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers
N Scale 53ft Stoughton Containers - EMP, Set #1 (3pk)
MODEL FEATURES:
- Fully assembled
- Magnetically stackable
- Each container individually numbered
- Razor sharp printing and painting
HO Auto-Max Carrier - CMO #800025
Era: Late 2000+
MODEL FEATURES:
- Separately applied ladders, brake rigging, stirrups, and handbrake details
- Simulated corrugated roof
- Full articulation with flexible diaphragm
- Safety striping
- 70-ton roller bearing trucks
- 33 inch machined metal wheels with RP25 contours
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
In 1999, Gunderson began production of the Auto-Max articulated auto rack car. This unique car can carry 22 SUVs on three sets of internal ramps. Measuring over 140 feet long and 20 feet tall from the railhead, the Auto-Max pushes the operational and clearance limits of the railroad industry.
HO Slab-Side Covered Hopper - Canadian Pacific #381128
8 Hatch
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
N Scale City Water Tower - Kit
Product Information
The prototypes for the Walthers Cornerstone City Water Tower are landmarks in small towns, big cities and at factories. In use since the early 1900s, steel water tanks like these are still common sights today. Proudly emblazoned with the name of the town or company, you will also find them at hospitals, college campuses and military bases.
Easy to add to layout scenes, kit parts come molded in appropriate colors. Authentic details include a conical roof, caged ladder, and concrete base. A set of alphabet decals is included so you can personalize your water tower with town names, industries and more. The City Water Tower is just one of a wide variety of Cornerstone N Scale kits.
The completed City Water Tower measures: 2-3/8 x 2-3/8 x 7inch (6 x 6 x 17.7cm)
Easy-to-build plastic kit
Realistic latticework supports
Includes alphabet decals
Molded in appropriate colors
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - New York Central (NYC Green) #157813
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO EMD SW1200 - DCC Ready - Soo Line #324
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- Next18 plug for easy DCC conversion at any time (decoder sold separately)
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
C-27 ICC Caboose w/Tsunami Sound & Lights - B&O/Chessie System #C-3915
The ultimate detail with the best Genesis features.
International Car Co. began specializing in caboose production as early as 1941. When the railroads entered the 1960s, many needed to replace their aging, in some cases home shop built, cabooses. International Car responded with a product that could be tailored to each railroads specific needs. Using quality components and modern engineering, ICC became a leading name within the industry.
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
ICC CABOOSE FEATURES:
- Better than brass detail including roadname and road number specific detail Laser-Sharp Painting and Printing
- Interior seating for the addition of crew figures.
- See-through End Platforms and Steps
- Flush Window Glazing
- Wire-form Grab Irons
- Caboose trucks with animated rotating bearing or static friction bearing caps
- Axle Generator Details
- Body-Mounted McHenry® scale knuckle-spring Couplers
- Machined Metal RP25 Profile Wheel Sets
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Separate wireform grab irons, etched metal coupler platforms
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for trouble-free operation
- Window packaging for easy viewing, plus interior plastic blister safely holds the model for convenient storage
- Multiple road numbers
- Minimum radius: 18in
LED LIGHT EQUIPPED FEATURES:
- LED lighting for long life and reliable operation
- On-board DCC Decoder by NCE
- Operates in DCC and Analog (DC) with lighting Functions Controllable in DCC
- Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
- LED Interior Lights
- All functions NMRA compatible in DCC mode
SOUND EQUIPPED MODELS ALSO FEATURE:
- Soundtraxx Tsunami SoundCar decoder w/ included sounds:
- Air horn or conductors whistle as appropriate
- Clickety-clack with optional wheel flat spot sounds
- Brake set/release sounds including retainers and brake squeal
- Big Hole emergency brake application sound
- Handbrake tie-down/release
- Adjustable flange squeal
- Air, horn, and bell sounds work seamlessly with Soundtraxx locomotive sound decoders
- Supports Advanced Consisting in DCC
- Full DCC functions available when operated in DCC mode
- All functions NMRA compatible in DCC mode
B&O CHESSIE FEATURES:
- Brand NEW ICC B&O Style body
- Angled window screens
- Early style axle-driven generator
- Caboose trucks with roller bearing caps
- Ash pans
- Toilet Drain
- Illuminated marker lights, where appropriate
- Reflectors on end cages
- Overhanging, diagonal-panel roof with or without blank panel at smoke jack per prototype
- Overhanging, x-panel roof for the B&O Chessie caboose
Chessie #3835, #3887, #3915 features: First time ever C26A version. Dayco axle generator with notched undeframe.
Chessie C-3771 Gold Caboose - Unique safety slogan and Gold and Silver Paint
Contour Modelling Putty - 5/8 fl oz Tube
Testors Contour Putty is used for filling seams, gaps, and creating custom features on plastic models. Dries to a hard light gray finish that can be sanded and painted.
HO Marine Industries Piggyback Flatcar - Canadian Pacific #505652
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
HO Scale Loading Dock Ramp - 4pkg
Forklift Dock Plates, package of 4
HO G43A Repaint 1980 Mill Gondola - Conrail (CR) #576156
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -G43A Repaint 1980- in the classic Conrail red paint scheme. This series represents the former PC-painted G43A series. Conrail retained the placards that were present on these original PC-painted cars from 12 years before. The Conrail reporting marks and road number are on the same three placards that PRR used, following the PC practices. Conrail then made new placards for the Conrail can opener logo and the two COTS panels, making a total of six placards on this model, on each side! The 100-Ton Barber S-2 trucks are equipped with rotating -Timken- caps and feature CR reporting marks and car number stenciling on the truck side frame, just like the prototype. This Conrail model is a true mill gondola, meaning it is not designated for coil steel loading; it has a steel floor. These Conrail mill gondolas feature details appropriate for the 1968-built car. SKUs 01 through 06 have a shop date of 5-80, while SKUs -07 through -12 feature an 8-80 shop date.
HO Custom Brown Wood Barrels - Food/Flour (5pk)
Pre-painted brown and labeled. Assorted product labels in each set.
Enamel Paint - Panzer Grey Streaking Grime - 35mL
A very special product for doing streaking grime effects over dark grey surfaces such as German vehicles painted with Panzer Grey. Also suitable for other effects such as add chromatic richness to any piece or surface. This enamel should be mixed well and then painted in vertical lines on the sides of the model. After, you just blend with a clean brush moist with Enamel Thinner to produce some great realistic streaking grime effects.
Gunderson Maxi III Well Car (5-Unit Set) - Southern Pacific #513832
MODEL FEATURES:
- Fully assembled and ready for your layout
- Weighted for optimum performance
- Razor sharp painting and printing
- Prototypically correct 33 and 38 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Body mounted McHenry operating scale knuckle couplers
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- Replacement parts available
- Minimum radius: 18 inches
HO Greenville 86Ft Quad Plug Door Box Car - Building America Repaint 2011+ - Union Pacific (SP) #616541
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Union Pacific (SP) -Building America Repaint 2011+- answers a frequently-requested paint scheme for the modern modelers! Who cannot love the classy Union Pacific graphics? In 1970, Southern Pacific (SP) ordered two different lots of Greenville quad door auto parts box cars (yes, we will offer original SP down the road). While some of these lasted in original SP paint into the 2010s, many of them saw Building America paint in a program fashion. These cars represent the SP cars after painting, and they retain their SP reporting marks but include a full complement of UP stenciling styles, UP shield, and UP Building America graphics. The underframe features accurate Center-of-Car Cushioning details with extended draft gear and this replica rides on 70-Ton Barber S-2 Roller Bearing Trucks with 33inch wheels, rotating -Timken- caps and truck mounted brake details. Each individual car features number-specific data, delineator, and tack board placement. In other words, each is a -little- different! Collect all four while you can, and enjoy this modern-era offering!
Fine Turf - Burnt Grass - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
HO RTR ACF 4650 3-Bay Hopper - SOO Line #74205
Date: BLT 11-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO 40Ft Refrigerated Container - ONE Set #1 (3 pkg)
Road Numbers: SZLU 9564004, SZLU 9544707, SZLU 9556478
(White/Pink)
MASTER MODEL FEATURES:
40-foot High-Cube Refrigerated Container
Composite materials sandwich-sides design
Detailed picture window refrigeration unit with separate parts
ISO Type 45R1
Five hinge / four bar doors with OUT style handles
Each set comes as a 3-pack
HO Custom Barrels Blue Feed & Seed (5pk)
Pre-painted blue with yellow tops and labeled. Assorted product labels in each set.
HO EMD SW9 - DCC & Sound - New York Central (NYC As Delivered) #8930
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
Taklon Spotter Detail Brush Set (4pcs)
Set Includes Sizes: 0, 3/0, 5/0, 10/0
NYC As Delivered (963H) - In Service 1965
Car Numbers: 885827
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
The Rapido HO Scale F7B and F9B feature:
Designed from original GMD blueprints and field measurements
The only 100% accurate GMD-built F7B and F9B locomotives – This is not a stand-in
Road-number and era-specific details applied at the factory
Steam generator or no steam generator panel as appropriate
Correct bodyside grilles as appropriate
Correct end details including unique CN steam generator end louvers
Backup light in correct location for CN or CP
Unmatched underbody details including air piping
Operational backup light (DCC)
Drive system designed for silky-smooth slow-speed operation
Metal Macdonald-Cartier Knuckle Couplers
DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings
Several road numbers per paint scheme
Rescue Mission
Urban Realism for your HO Layout from Downtown Deco
Not all parts of town are shiny and new. Older areas, often along the tracks, show their age. Occasionally, churches or other service organizations open safe places for those down on their luck like the Rescue Mission. This new kit from Downtown Deco features highly detailed cast-Hydrocal® walls with plastic details. The model comes with complete assembly and finishing instructions. Use it to add authenticity to an older commercial district on your layout.
Cast Hydrocal plaster walls, plastic door & windows and full color paper signs and awnings.
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
Built-&-Ready Landmark Structures - Deuces Bike Shop
Assembled - 5 x 6 inches (12.7 x 15.2cm)
Spice up the seedy side of your layout town with historical flare. This fully assembled structure represents a nostalgic easy rider setting with incredible detail. Exterior details include a weathered metal roof and siding, signs and decals, an old pop machine and a fenced yard loaded with a junkyard dog, old bike parts and other details.
HO GATC 2600 Airslide Hopper - GACX (2pk)
MODEL FEATURES:
- Three different body styles
- Rectangular or oval shaker brackets
- See-through metal roof walk
- Highly detailed, injection molded body
- Fully-assembled and ready-to-run out of the box
- Detailed underbody including outlet piping
- Gravity or gravity-pneumatic outlets
- Roller bearing or Bettendorf trucks
- Factory installed wire grab irons and brake piping
- Coupler cut levers and train air lines
- Machined metal wheels
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Operates on all popular brands of track
- Minimum radius: 18 inch
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #18
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Code 100 Nickel Silver DCC-Friendly #5 Turnout - Left Hand
Track is the most important model on your HO layout, and Walthers Track makes it easy to create realistic mainlines, sidings, and more! Combining great looks and great performance, each Code 100 item comes fully assembled and features:
- Thin profile ties in realistic dark brown with enhanced wood grain detail
- Fine profile molded spike and tie plate details on each tie
- Spike-mounting holes positioned next to the rail
- Molded starter points on underside of ties for center spikes
- Custom formulated nickel silver rail for improved electrical conductivity
HO USRA Single-Sheathed Boxcar: D&H
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
2mm Static Grass - Patchy Grass (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
N Scale Modern Tagger Graffiti Decals - Set #14 (10pcs)
Love it or hate it, graffiti is everywhere. We do not condone painting graffiti on real railroad cars, buildings, bridges, etc. and it is against the law. But defacing your model railroad with Blair Lines Graffiti Decals is fun and still legal as far as we know! All decals are reproductions of graffiti found on real railroad cars.
All of these graffiti decal sets are now lasercut! What this means is you will no longer have to trim these decals close. You only have to cut a couple of small tabs and soak the sheet in water. As an added bonus, the decals are now printed on white decal paper making them more opaque!
HO 5820 Covered Hopper - Procor/UNPX (Low Black Solid) #122670
Era: 1990s+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO Delivery Target Red 1953+ Steel Bay Window Caboose - Illinois Terminal #982
Product: St. Louis Car Co. Illinois Terminal Steel Bay Window Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Gould plain-bearing trucks with separate brake beam part
Wheels: CNC-machined standard RP25 .110inch tread 33inch wheels
DC/DCC Lighting Features: Interior Lights
Illinois Terminal (ITC) -Delivery Target Red 1953+- is the first of three different Illinois Terminal schemes we are offering in our first production run of St. Louis Car Company cabooses. These cars feature a safety-inspired bright -target- red paint. The caboose also has other colors present on the exterior, including -canary yellow- handrails and steps. Additionally, the Standard Railway Equipment roof received a coat of light gray paint. The prototype Illinois Terminal lettering above the cupola and the ITC with road number was applied onto thin metal placards which were bolted onto the car side and had an off-white appearance, which we have replicated this -off-white- reflective color with our graphics. Similar to our NYC offerings, our models include large (unlit) oil lanterns on one end of the caboose. The fully-painted and apportioned interior for these models includes the two tone green scheme as found in the original cabooses. Check out those double bunks as you peek through the large windows. Our Illinois Terminal delivery scheme cabooses are available in two road numbers.
HO Portec 3000 Covered Hopper - Midwest Railcar (MCEX) - #330241
Features:
- Ready to run
- Injection molded plastic
- Fine scale detail with many separately applied parts
- 2 Body and roofwalk variations to accurately match the prototype
- 2 styles of vibrator brackets
- Highly detailed end cages and brake gear
- 100 Ton Trucks
- Metal Couplers
- Etched metal roofwalks and end platforms
- Crisp painting and printing
Set of 2
Use these molds to cast the rocks to line the edges a creek, river, etc. Molds are flexible and reusable. Set of 2 different molds - 5inch x 7inch (12.7 cm x 17.7 cm) each
Choose from a wide variety of durable, flexible and finely detailed rock molds. Use Lightweight Hydrocal to cast small boulders, rock outcroppings, rocks for fields and creeks or entire rock faces. Color with Earth Colors Liquid Pigment
RC Filter (Snubber)
Features
Use with any DCC system to prevent large voltage spikes.
Reduces or eliminates voltage spikes on long runs of DCC bus wire
Protects decoders from damaging inductive voltage spikes
Solve temporary loss of control or runaway problems
Preserves DCC waveform accuracy
you experience the following?
1) loss of train control but not running away.
2) Runaway engines (Take off)
3) Loss of decoder programming.
4) Decoders blowing up.
5) Any combination of above.
Then you should consider installing RC filters on the track.
WHERE DO I INSTALL THE RC FILTERS?
Put the very first one on a given track bus at the FAR end of long track bus run.
Repeat for every track bus you have. Why at the FAR end? The booster already has some RC filtering capability built in which covers the starting point of the track bus. The RC filter you install will provide the same capability at the opposite FAR end. Together they work on filtering the middle of the track bus. A divide and conquer approach to the problem that has it roots in engineering principles
HO PC&F 5241 CUFT - Boxcar - Saratoga & North Creek (SNC) - Single Car #3370
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Greenville 86Ft Double Plug Door Box Car - Norfolk & Western (Delivery 1-1978) #861499
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Norfolk & Western (NW) -Delivery 1978- replicates another major player in the world of Greenville 86Ft Boxcars. The NW rostered several Greenville series, but the 1978 order was the biggest. In fact, this 1978 B-138 class of 317 cars was the biggest Greenville order of any railroad. The bold NW graphics are almost understated on a boxcar of this size, but this paint scheme is one example that literally defines modern auto parts trains. The NW cars feature the correct late-Greenville body with 5 grab irons on each side along with body mounted brake gear. Those gorgeous 100-Ton -Low Profile- Barber S-2-C trucks show off the accurate rotating Timken bearing caps. SKUs -01 through -06 have January 1978 data and SLUs -07 through -12 have February 1978 data.
HO Intermountain 4-Panel Coalporter, Canadian National
CNA Website scheme
Features:
Sharp Painting and Lettering
Prototype Accurate Paint Schemes
Multiple Road Numbers
InterMountain 100 Ton Trucks with 36in Metal Wheelsets
Metal Knuckle Couplers
HO 50ft PS 5277 Cu.Ft. Exterior Post Boxcar - GTW #309362
FEATURES:
- Laser Sharp Painting and Printing
- 33 inch InterMountain Precision Metal Wheelsets
- Kadee #178 Metal Knuckle Couplers
Date: BLT 9-74
Minimum Radius - 22 inches
HO Union X-3 Tankcar - Procor Limited #37466
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO USRA Composite Drop-Bottom Gondola -Ready to Run- Michigan Central #12350
Date: BLT 8-19
All are Ready-to-Run
-Laser Cut Wood Sides and Floor
-Laser Sharp Painting and Printing
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Rust Streaks Enamel Paint - 35ml Bottle
Rusty Wash Effect
Enamel type streaking for modelling.
Rust and corrosion streaks and stains are easily produced using this reddish-brown color.
Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look
HO Dash 8-40CM - DCC & Sound - BC Rail: Red/White/Blue #4607
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
HO Scale G2 AC4400CW - DCC & Sound - Kansas City Southern #4614
Detailed Information
KCS FEATURES:
Nathan K5LAR24 horn
Late body features
PTC antennas and GPS domes
Late, notched fuel tank
Central air intake moved rearward
Fuel tank welded to frame
Evenly spaced rear grab iron
High number boards
Extended Range Dynamic Brakes
Electric air dryer
GE steerable trucks
Front and Rear ditch lights
Two handrails above inverter cabinet
A 50-unit order was delivered before the turn of the century in the KCS gray paint scheme. Beginning in 2007, these units were renumbered and repainted into the attractive -Southern Belle- paint scheme that they wear today. With the recent merger of KCS and CP, these locomotives are expected to be seen across the entire Continent.
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Late Script Logo) #286387
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20218
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO 40Ft Ortner 100-Ton Open Aggregate Hopper - Blue Circle Cement WBCX #73022
Product Information
Move heavy bulk loads for your railroads customers with a fleet of WalthersProto 40Ft Ortner 100-ton Open Aggregate Hoppers. Highly detailed and fully assembled, other features include:
One time run of these roadnumbers, order now - limited quantity available!
Distinctive high-sided design in service from 1970s to present
Prototypes used for hauling heavy aggregates including limestone, iron ore and taconite pellets, gravel, sand and more
Factory-installed air-equipped door details as appropriate
Factory-installed wire grab irons and end railings
Removable load included
Detailed brake gear
Weighted for excellent tracking
Ultra-smooth rolling metal axles and RP-25 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
HO - Siemens ACS-64 - DCC & Sound - Amtrak/Mobility Scheme #602
Features:
DCC sound-equipped ACS-64 includes a TCS WOWSound CD-Quality 16-bit 44,100Hz decoder with Audio Assist
Sounds package includes: horn, bell, cooling fan/power inverter, pantograph extension and retraction, coupler close/release, brake release and application, momentum, crew alert, grade crossing quill, departing and arriving station announcements, and more
Keep-Alive device for uninterrupted operation, even over dirty track and remappable light functions, die-cast frame, and selector switch for choice between rail and pantograph operation.
Performs best on 22inch radius curves or greater
HO Scale 1:87
Product Measurements: L 9.5 in., W 1.5 in., H 2 in.
Retail Package Measurements: L 12.5 in., W 2 in., H 3.5 in.
HO Downspouts for 5Ft Roof Overhang - pkg(4)
RTR 60Ft Gundreson Box Car - TTX #889015
Primed for Grime
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Primed for Grime Models Feature:
-Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
-Patches applied and shaped per road number matching each corresponding side to the prototype
-Duplicated look and feel of -In Service- equipment; -Tattered and Torn- just like the real thing
-Some Prime for Grime models feature paint scheme variations
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO H-6-G - DCC & Sound - Canadian National Railway (Straight Wafer) #1389
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO Scale US&S Switch Timer/ Lock - 4pkg
This is a package of four
HO EMD SD7 - DC/Silent - Bessemer & Lake Erie #451
Bessemer & Lake Erie
- Unique -B&LE- style sand fill door hatches
- Long hood forward operation
- Extra large pilot step and corresponding additional stepwell step (First time done on a plastic model!)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO Concession Trailer - Pop-Tastic Popcorn
HO SD9043MAC - DCC Ready - Union Pacific #8026
ETA: October 2023
Detailed Information
UP FEATURES:
Leslie 3-chime horn
Large EMD plow
Front ditch lights
During the horsepower race of the 1990s, EMD offered an -upgradable- SD90MAC. EMDs 6000hp 256H prime mover was still being tested for reliability and issues at the time and UP needed power quickly. To combat this, EMD offered the SD90 with the 4300hp 710 prime mover in its place until the 256H prime mover was ready to be installed after successful testing. Unfortunately, the 256H was deemed too problematic and the conversion was never completed. UP classed these as SD9043MACs. Purchased in 1996, these big brutes were initially used in coal drag service before ultimately being used in other types of service. They were factory delivered with the -We Will Deliver- slogan. By the mid 2010s, a large batch were sold to NS for rebuilding into SD70ACUs.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights
Illuminated number boards
Etched, see-through walkway steps
Dual Sugarcube speakers for optimal sound quality
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined
flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field
measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Insignia White Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
W&LE #78932, #80905, #80913, #80913
MODEL FEATURES:
Wire and plastic handrails, stirrup steps, ladders and underbody details
Separately applied brake gear including brake wheel, air reservoir, and brake cylinder
Bettendorf or roller bearing trucks with 33In machined metal wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers
Painted and printed for realistic decoration
Weighted for trouble-free operation
Interior plastic blister safely holds the model for convenient storage
Window packaging for easy viewing
Fully assembled
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
The development of the hopper car went along with the development of automated handling of such commodities, with automated loading and unloading facilities.
Open hopper cars are used for commodities such as coal, which can suffer exposure with less detrimental effect. Hopper cars have been used by railways worldwide whenever automated cargo handling has been desired.
1:87 1999 TMC RTS Transit Bus: TTC Toronto
Destination: 11 Bayview to Davisville STN
- Pad-printed graphics
- Limited edition
- All diecast metal
Spray Can - Gray Violet (Luftwaffe) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
HO 40ft Fruehauf Trailer - Penn Central #295532
Era: 1971-1990, 1991-2009, 2010-Present Day
MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- 2 or 4 door rods per prototype
- Wheeled or shoe-style landing gear per prototype
- Fully-assembled and ready to use out of the box
- Highly-detailed, injection-molded body
Evergreen Scale Models - Opaque White Polystyrene I-Beam .188In x 14In (3 pcs pkg)
HO 53Ft Gunderson Husky-Stack Well Car - Arkansas & Oklahoma AOK (2pkg) #73530, 73649
Does not include containers
Road Numbers Include:
73530
73649
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
BLMA HO - 18inch Drop Grab Irons (20/pkg)
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200095
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
HO ACF 2970 Covered Hopper - CSX/Tan #226684
MODEL FEATURES:
-Round or trough hatches
-Photo-etched metal roof walk
-Separately applied wire grab irons and stirrup steps
-Separate brake cylinder, valve and air reservoir with wire brake plumbing
-Detailed outlets
-Multiple road numbers
-Fully-assembled and ready-to-run out of the box
-Accurately painted and printed
-Highly detailed, injection molded body
-Separately applied brake wheel
-Machined metal wheels
-Screw mounted trucks
-Body mounted McHenry operating scale knuckle couplers
-Weighted for trouble free operation
-Wheels with RP25 contours operate on all popular brands of track
-Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
-Minimum radius: 18in
PROTOTYPE INFORMATION:
The 2-bay covered hopper first entered service in the 1950s. The cars handle loads such as cement, sand and similar denser bulk commodities. In the 1960s, American Car and Foundry introduced the Centerflow design. The Centerflow relies on the cars rounded body to provide structural strength without the added weight of bracing, as well as making gravity unloading easier. This 2-bay car came in a 2,970-cubic foot capacity.
HO 50ft Evans DD Plug Boxcar - HS #11471
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
Plastruct 91253 Clear Plastic Sheet .060 (2pcs pkg)
.060 x 7 x12 inches
HO Doors (White Styrene) - Roll-up Loading - pkg(2)
9-1/2 x 12 scale feet / 1-5/16 x 1-5/8 inches
HO Grass Tufts - 1/4 inch - Short Wild Mix (104pcs)
Walthers SceneMaster HO Scale ready-to-use Grass Tufts are perfect for adding longer grass and weeds in small areas. They are available in realistic lengths and colors to simulate overgrown vegetation in HO and larger scales. Easily mixed and matched with other SceneMaster scenery materials to add realism to your layout!
- Great for adding long vegetation to small areas
- Pre-shaped and ready to use
- Ideal along fences, highway or railroad rights-of-way and more
- Flexible transparent bases
HO C425 PH2 DCC Sound BC Rail
FEATURES:
- C425 Phase 2 models include cab with either horizontal or vertical headlights per the prototype
- Models include redesigned AAR style truck sideframes with separate brake cylinders and separate bearing cap detail (included when appropriate per the prototype).
- Directional lighting w/ golden-white LEDs
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Factory-equipped with AccuMate knuckle couplers
- Analog version features NMRA 8 pin plug for DCC
- Separately-applied wire grab irons, ladders, and drop steps
- Separately-applied marker lenses
- Improved painting and printing w/painted handrails
- Two painted crew members
Sound Features for Gold Series:
DCC Operation
- Supports all DCC-programming modes
- Flexible mapping of function keys F0 to F28.
- A total of six DCC function outputs are available
- Follows all NMRA DCC standards and recommended practices.
Analog (DC) Operation
- The LokSound Select Dual-Mode decoder allows your Atlas Gold Series locomotive to be used on DC as well as on DCC layouts.
- Please note that the Atlas Quantum Engineer will NOT operate an Atlas Gold Series locomotive equipped with a LokSound Select decoder on an analog (DC) layout. However, the sound and lighting functions of the LokSound Select decoder in the Atlas Gold Series C424/425 locomotive can be controlled by an easy-to-use basic DCC system.
- Also note that on a DC-powered layout, a DCC and sound equipped locomotive (such as the Atlas Gold Series C424/425) CANNOT be consisted with another locomotive that does not also have both DCC and sound. (This statement does NOT apply to DCC-equipped locomotives operating on a DCC layout.)
Sound Functionality
- Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
- There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
HO GE AC4400CW - DCC & Sound - Quebec Cartier Railway QCM #28
Detailed Information
QCM FEATURES:
Medium plow
Low mount number boards
Walkway mounted ditch lights
Mid/late production units
Long hood mounted red beacon
5-chime horn
GE style self-steering trucks
The Quebec Cartier Railway (QCM) operates approximately 260 miles of track in the Canadian province of Quebec hauling large amounts of Iron Ore. Known for their fleet of Alco locomotives, QCM turned to GE for a small batch of new AC4400s beginning in 2001 to replace their aging Alco fleet. A unique feature of these units is a red beacon mounted on the long hood which operates in the cold weather climates to warn against possible freezing coolant.
AC4400CW SERIES LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Scale G2 AC4400CW - DCC & Sound - CSX #1
CSX FEATURES:
Front ditch lights
Prime air dryer
Low number boards
Equipped with a CSX standard -tow-chain-
CSX purchased more AC4400CWs than any other railroad, spanning almost the entire production period. This includes three of the first six produced which have distinctive spotting features compared to all other units. A lightning bolt graphic was applied under the road number making these easy to identify as AC traction motors. Unique to CSX, all these units are equipped with hooks to carry a length of chain under the walkway.
ROAD NUMBER SPECIFIC FEATURES:
#1
Named Spirit of West Virginia
One of the original six AC4400CWs built
Re-trucked and renumbered from the originally delivered 9100 series
Holden K5H Horn
early body with central air intake forwards
unique angled grab irons on top of the nose
radiator grills on right side are evenly sized (a feature that didnt last with later models)
unevenly spaced rear grab irons
vertical handrail behind invertor cabinet
extended range dynamic brakes
early no-notch fuel tank
bolted on fuel tank
PTC antenna array
GE Steerable trucks.
#17
K5LAR24 horn
PTC antenna array
early body features
central air intake in forward position
early no-notch fuel tank
bolted on fuel tank
unevenly spaced rear grab irons
vertical handrail behind inverter cabinet
lipped Exhaust tub
extended dynamic brakes
GE Hi-Adhesion trucks
struts on all 4 corners of each truck
delivered with inside struts but modified to outside braced struts. This model represents the later modified version.
#420
K5LAR24 horn
late body features
central air intake moved rearward
late fuel tank with notch
fuel tank welded to frame
evenly spaced rear grab iron
handrail behind invertor cabinet jogged for capacitor box
two handrails above inverter cabinet
late antenna package
GE steerable trucks.
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO MLW M630 - DCC & Sound - CP Rail (Multimark) #4573
8inch stripe w/ water expansion tank and ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound V5 decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
HO PS-2-4427 High Side Covered Hopper - TLDX Delivery Cargill 7-1967 #7251
Product: Pullman-Standard PS-2CD 4427 ?High Side? Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with Timken rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36″ Wheels
? TLDX ?Delivery Cargill 7-1967? shows a classic private leasing delivery scheme, with the large round Cargill placard filling the side of the car. This car features all of the Pullman phase details for the era, including center sill supports between the bays, open end running board supports, Miner gravity gates and ribbed-style roof hatches. The model is equipped with 100-ton Barber S-2 trucks with separately applied brake beams along with rotating Timken caps
HO Alco RS3-M Chop Nose - DCC & Sound - Western New York & Pennsylvania #406
Photo courtesy of David Stewart
Delivery Expected Early 2024
Details:
RS-3 units #4115, #4106, #4107, #4113, #4122, #4112, #4119, and #4128 were rebuilt by Morrison Knudsen into RS-3m units (numbered #501-508, respectively) between December of 1975 and March of 1976. The locomotives were re-engined with the 2,000 horsepower ALCo 12-cylinder 251C engine, and the long hood was raised six inches to accommodate the larger engine. The dynamic brakes were also moved to a box behind the cab.
Tru Color Paint - Acrylic - Vermont Red - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO SD90MAC-H Phase I - DCC & Sound - Union Pacific #8500
Detailed Information
UP FEATURES:
#8503 & #8500 represent the first renumbering, originally delivered as #8203 and #8160 respectively.
#8509, #8512, and #8520 are modeled with the starter capacitor removed and the EOT mounted further forward on the fuel tank.
Union Pacific became the only buyer of the SD90MAC-H, known to them as SD90AC, when Canadian Pacific transferred their order to the Phase 2 variant. The first 7 were considered pre-production units and wore 2-3 numbers during their lifetime. The 8500 series we are offering represents the second and third order of SD90MAC-Hs that were delivered between 1997-1999 and before their final renumbering to the 8900 series.
SD90MAC-H SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and ?printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200075
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
Clear Blue Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO 40ft 16K Gallon Tank Car - Minnesota Corn Processors/DMIX #190194
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
0.020 inch Diameter Round Brass Rod - 12inch Long (5 pkg)
Acrylic Flat Colors - Neutral Gray - 3/4oz (23mL) Bottle
XF-53
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO Single-Track Cut-Stone Viaduct - Variable Height
Features:
Available in single track or double track widths
Kit contains single arch and two half-arch ends - combine kits for longer applications
Can be used w/o pier units for lower heights such as in urban settings
Concrete double track viaduct also suitable for O scale single track applications
Length - 18inch
Width - overall (Single) = 3 1/4inch, (Double) = 5 1/4inch
Width - btw. walkways (Single) = 2 1/8inch, (Double) =4 1/8inch
Height (w/ piers) - to deck = 9 5/8inch, to top of railings = 10 3/8inch
Height (w/o piers) - to deck = 3 1/2inch, to top of railings = 4 1/4 inch
HO 55Ft Evans 4780 Covered Hopper - ADM (UELX) #10028
Product Information
Expand grain traffic along your HO railroad with a fleet of WalthersProto 55ft Evans 4780 Covered Hoppers! Introduced in 1977 and still going strong today, they can be found handling all types of grains and dried distillers grains used for animal feed. Fully assembled and ready for service, features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint and lettering
Ultra-smooth rolling 36inch RP-25 turned wheelsets
Proto MAX(TM) metal knuckle couplers
HO MLW M420 MR20b - DCC & Sound - Canadian National (Stripes) #3559
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO GE U25B Low Hood - DCC & Sound - Penn Central #2668
The HO scale U25B Locomotive features:
Phase I, II & III units represented in 1st run. (Phase IV & other units will come with future runs)
Single-window style for low nose units. (Double-window in future runs)
Both low- & high-short hood versions
Early high- & later low-style side doors.
Road specific details for each model
Working step lights on low-short hood models
Different roadname-specific exhaust stacks
Roadname-specific battery box doors on engineers side
Roadname-specific air cleaner boxes on rear
Working inspection lights on all units
Lighted control stand inside cab
Different types of fuel & air tanks, as appropriate
HO Row House - Kit
Product Information
Walthers Cornerstone Row Houses are perfect for adding big city realism to your layout. Each kit includes a pair of brick side-by-side homes with a raised concrete basement foundation with windows. In many locales row houses line the streets near large factories such as steel mills and can also be found in entire neighborhoods in urban settings. Full blocks of identical homes are easy to model by combining several kits side by side. If you have densely populated neighborhoods on your steam or diesel-era layout use the Row Houses to add realism to your layout along with other Cornerstone HO Scale housing.
Classic home for big city neighborhoods
Found in the heart of many North American cities for over 100 years
Easily combined to build a typical block or entire neighborhood of homes
Printed window treatments
Separate doors, windows, steps and downspouts
Molded in three colors and clear plastic
As shown the Row Houses kit measures: 7-13/16 x 4-9/32 x 4inch (19.8 x 10.8 x 10.1cm)
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - RSGX #4328
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
GE Detail Set - for Southern Pacific, CSX Transportation, Norfolk Southern & Canadian Pacific
Die-cast metal
85ft General American G85 Flatcar - Trailer Train - New Haven #16034
Product Information:
Limited edition - one time run of these road numbers
Prototypes handled trailers and containers from 1961 to mid-1980s - used for general service loading into the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in up or down position or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
33In turned metal wheelsets
Proto MAX metal knuckle couplers
Add more realism in minutes with SceneMaster trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24In
HO EMD GP9 Phase 2 w/High Hood - Standard DC - DT&I #984
FEATURES:
- Standard high short hood
- Based on as-built units produced from 1955 to 1957 (Phase II)
- Limited edition - one time run of these roadnumbers!
- Scale width hood with correct contours
- With or without dynamic brakes as appropriate
- Front and rear footboards or front plow and flat rear pilot as appropriate
- See-through steps
- Same powerful drive as WalthersProto(R) locos featuring:
- Five-pole skew-wound motor
- 14 to 1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Machined brass flywheel
- Heavy die-cast metal chassis
- Constant and directional warm white
- Correct size RP-25 metal wheels
- LED headlights
- DCC-ready with 21-pin (mtc) DCC plug
- Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately)
HO 60Ft Gunderson 7550 Double Door Boxcar - TTX #663810
MASTER MODEL FEATURES:
All New Tooling!
Separate ladders, hand brake and door rods
Door stirrup, unique to the 7538
Single or double plug door as per the prototype
Roof with 3 Stanray X-panels and 3 diagonal center panels
Brake arrangement offset to A end of body
Crisp, accurate lettering and paint details
HO Brass CPR RS-3 #8435 DC/Nonsound- Estate Brass Locomotive
Display picture is accurate to the item being sold.
Pre-owned, but in great condition!
Comes in the original Box!
This brass unit has been left unpainted
Please note that this item is final sale.
No refunds or exchanges.
G2 Dash 9-44CW - DCC Ready - Santa Fe #618
ETA: Late October 2022
Detailed Information
ATSF FEATURES:
As-delivered details
Sinclair & EOT antennas
Prime air filters & air dryer
Leslie RS3L horn
Early (-dog-leg-) stepwell gussets
ATSF-specific plow with open MU doors
Front-only ditch lights mounted on pilot face
Truck & nose grab iron style per prototype road #
ATSF NOTES:
ATSF 600-699 were some of the last units delivered to Santa Fe before the BNSF merger. Painted in the famous -Superfleet- scheme, they handled priority trains across the system. Being relatively new, the units were a low priority for repainting, and several survive today today wearing their faded original paint.
DASH 9 SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
HO MLW M630 - DCC & Sound - CP Rail (Multimark) #4510
5inch stripe w/water expansion tank and ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound V5 decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (Sand) #7021
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 66ft Bulkhead Flatcar - British Columbia (Dark Green) (6pk)
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
HO ACF 5250 Covered Hopper - Hercules Pro-Fax (HPCX) #50404
Features:
Ready to run
Injection molded plastic
Fine scale detail
Etched metal roof walk
Metal knuckle couplers
Road specific hatch and outlet configurations
Road specific roof walk variations
Three body style variations
Separately applied wire grab irons and wire brake lines
Crisp painting/printing
Free-rolling 100-ton trucks
HO GP50 - DCC & Sound - Norfolk Southern #7054
Detailed Information
NS FEATURES:
Phase I Body with rounded blower housing
Long hood forward setup with high short hood
Southern style 5-chime horns on both ends
Long hood mounted bell
Dual Firecracker antennas
Timkin bearing trucks
Hood mounted walkway lights (non-operational)
Large EMD style plows and ditch lights on both ends
Built in 1980 for the Southern Railway, these distinct high nose long hood forward locomotives were painted into Norfolk Southern colors after the Southern / Norfolk Western merger of 1982. They retained most of the as built features other than ditch lights added in the 1990s.
ROAD NUMBER SPECIFIC FEATURES:
#7037
Earlier NS scheme with dashed frame stripes
#7054
Newer NS -horse-head- logo with solid frame stripes
#7085
Earlier NS scheme with solid frame stripes
GP50 LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Walkway tread
Lift rings
Sander lines
Windshield wipers
McHenry scale knuckle couplers - Kadee compatible
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140087
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
RTR 60Ft Gundreson Box Car - CPR #218363
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO Scale G2 SD90MAC Diesel - DCC & Sound - Canadian Pacific #9144
Detailed Information
CP FEATURES:
CP-specific cab and access doors
Front only ditch lights mounted above the walkway
As per prototype, ground light only on engineer side.
Raised walkways for snow management
Dual trainlines
No blue flag holders on engineers side of cab
CP Golden Beaver paint scheme
Canadian Pacific purchased 60 SD90MACs with delivery beginning in 1998. Their purpose was to pull freight between Ontario and British Columbia. The entire fleet has been rebuilt into SD70ACus as of 2020.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO PC&F 5241 CUFT - Boxcar - Guilford - (B&M) - Single Car #3292
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO EMD GP40 - DCC Ready - SSW/ Cotton Belt #7600
1966+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Evergreen Scale Models - Opaque White Polystyrene T Shape .141In x 14In (3 pcs pkg)
HO 4650 Centerflow Hopper - Wisconsin Central (CN) #87044
Features:
Etched metal roof walks
Detailed brake gear
Blackened metal wheels
Accurate painting and printing
100-ton roller-bearing trucks and body mounted AccuMate couplers with screw-attached coupler pockets.
AccuMate couplers are made under license from AccuRail, Inc.
HO G43A Repaint 1980 Mill Gondola - Conrail (CR) #576127
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -G43A Repaint 1980- in the classic Conrail red paint scheme. This series represents the former PC-painted G43A series. Conrail retained the placards that were present on these original PC-painted cars from 12 years before. The Conrail reporting marks and road number are on the same three placards that PRR used, following the PC practices. Conrail then made new placards for the Conrail can opener logo and the two COTS panels, making a total of six placards on this model, on each side! The 100-Ton Barber S-2 trucks are equipped with rotating -Timken- caps and feature CR reporting marks and car number stenciling on the truck side frame, just like the prototype. This Conrail model is a true mill gondola, meaning it is not designated for coil steel loading; it has a steel floor. These Conrail mill gondolas feature details appropriate for the 1968-built car. SKUs 01 through 06 have a shop date of 5-80, while SKUs -07 through -12 feature an 8-80 shop date.
N Scale Concrete Slab Double-Track Easement Curve, Right & Left - Radius 22.5 (15-16 3/8 inches)
HO BNSF Rail Chief - Train Set
You will command the rails with our striking Rail Chief set. Complete with miniature people and a signal bridge, this 130-piece set will let you oversee your own detailed railroading empire.
This ready-to-run train set includes:
- EMD GP40 diesel locomotive with operating headlight
- open quad hopper
- gondola
- steel reefer
- offset cupola caboose
- body-mounted E-Z Mate couplers
- 47 x 38 inch oval of snap-fit E-Z Track, including 12 pieces curved track, 1 piece straight track, and 1 plug-in terminal rerailer
- signal bridge
- 36 miniature figures
- 24 telephone poles
- 48 railroad and street signs
- power pack and speed controller
- illustrated instruction manual
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - PTTX #93477
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Red LED (603 Size)
Wire - 13inches long
HO Scenic Accents - People Talking (6)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
The people in this set seem to be conversing. An elderly woman has a sweater over her arm. A man stands next to another woman with his arm around her shoulder. A woman waves, while two other men get about their business.
HO Milwaukee Beer & Ale Brewery - Kit
Product Information
Skoal! Prost! Salut! No matter how you say it, the handsome Walthers Cornerstone HO Scale Milwaukee Beer and Ale Brewery building will be the toast of your railroad. Many started as small, local suppliers, eventually growing into huge operations, thanks to the railroads. In every era, these facilities require an amazing variety of freight cars. Boxcars and hoppers bring in grains and malt, as well as empty barrels, bottles, bottle caps or cans. Hoppers haul in coal and one or two may depart with loads of broken glass. Gondolas haul scrap aluminum. Tank cars arrive with natural gas, or corn syrup, while others carry beer in bulk. Insulated boxcars and reefers bring in hops, then haul the finished products to market.
Milwaukee Beer and Ale will add plenty of operation to your present railroad, and if space is limited, it can be the main industry of a small switching layout. Its ornate trim, brick construction and various sizes and shapes of windows and doors (all molded separately) make it look right in any era. Its perfect as the main building in a vintage scene, or as an older part of a modern complex.
This easy-to-build kit as shown measures 12-3/8 x 10 x 12inch (31.4 x 25.4 x 30.5cm). Milwaukee Beer and Ale is one of many Cornerstone HO Scale industrial buildings.
Vintage brick architecture
Great for early-1900s to present industrial scenes
Molded in appropriate colors
Decal signs
Easy-to-build plastic kit
Talus - Medium Gray (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings, and/or road cuts. Intermix grades and blend shades for the most realism. Color natural talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle talus and secure with scenic cement (#191).
Particle size - Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
Erie Lackawanna #2516 (gray, maroon, yellow, gray Roof)
Add classic diesel power to your roster or collection with this series of ready-to-run and highly detailed models with featuring upgraded handrails (correct for all phases), 9 Ft 4 inch AAR B trucks, metal MU hoses, air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, can motor, flywheels, nickel silver wheels with RP-25 flanges and knuckle couplers.
HO Scale G2 AC4400CW - DCC & Sound - Chicago & North Western #8816
CNW FEATURES:
Holden K5H Horn
Early body features
Desk style control stand
Fuel tank without notch
Unevenly spaced rear grab irons
Front ditch lights
Fuel tank bolted to the frame
Low number boards
Extended range dynamic brakes
Lipped exhaust tub
As delivered Antenna package
GE Hi-Adhesion trucks
Inside struts on all truck sides
Central air intake in forward position
An earlier purchaser of the AC4400CW, the units purchased by Chicago & Northwestern were again dressed in the attractive -Lighting Stripe- paint scheme, but now with the addition of an Operation Lifesaver decoration on the long hood. The AC traction paired well with the long heavy coal trains CNW was pulling out of the Powder River Basin. Many of these units lasted well after the UP acquisition of CNW in their original paint or with minor patching. These early versions rode on the first iteration of the Hi-Adhesion trucks with struts on all four corners of each trucks that were both shorter and inboard of the brake cylinders compared to later variations.
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO SD90MAC-H Phase I - DCC & Sound - Union Pacific #8503
Detailed Information
UP FEATURES:
#8503 & #8500 represent the first renumbering, originally delivered as #8203 and #8160 respectively.
#8509, #8512, and #8520 are modeled with the starter capacitor removed and the EOT mounted further forward on the fuel tank.
Union Pacific became the only buyer of the SD90MAC-H, known to them as SD90AC, when Canadian Pacific transferred their order to the Phase 2 variant. The first 7 were considered pre-production units and wore 2-3 numbers during their lifetime. The 8500 series we are offering represents the second and third order of SD90MAC-Hs that were delivered between 1997-1999 and before their final renumbering to the 8900 series.
SD90MAC-H SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and ?printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
53Ft High Cube Container - CP - Red (2-pack 732333 and 732382)
2020 Release
Detail Variations:
All-new numbers
CPPU 732333
CPPU 732382
The Rapido Trains HO Scale 53ft container is a beauty way to go. The insulated dry boxes are ubiquitous to intermodal trains across Canada and the United States. While a good portion of these containers can be found on domestic trains across Canada, they are also seen throughout the US Midwest and as far south as New Orleans.
The containers will also come with an optional heater box and fuel tank, correctly decorated and installed as appropriate for each paint scheme. All containers come assembled with an easily-removable floor so that additional weight can be added as-desired by the end customer.
Available in a wide range of paint schemes including both railway-owned containers as well as those owned by various transportation and shipping companies.
Adapter Board 21MTC to 9-Pin JST (for Athearn locomotives)
Perfect for Athearn (and others) this new 9 pin (female) 21MTC (Male) adaptor board allows the popular 6 output ESU 21 MTC LokSound and LokPilot decoders to be easily added to your favorite locomotive.
More Functions:
More and more locomotives now have front and rear headlights and front and rear flashing ditch lights. In order to accommodate for this in DCC 6 function outputs need to be used. As 8 and 9 pin DCC plugs only allow for 3 and 4 outputs respectively, this new adaptor board will allow easy conversion to our 6 function decoders. 4 Outputs though the 9 pin plug and 2 more on solder pads.
1.5 Volt Lighting:
As Athearn normally uses 1.5 volt bulbs it is often easier to use the supplied resistance in the Motherboards for those lights. This new adaptor board also includes 1.5 volt light resistance for the additional 2 outputs that do not already go through the 9 pin JST plug. ESU decoders also include the ability to dim the outputs to match perfectly the onboard resistance with the adaptor resistance if needed. There are also solder bridges for bypassing this resistance if bulbs are not used.
In addition there are extra common pads and solder pads for speakers directly on the adaptor board.
Adding Great DCC and Sound with all the proper lighting has never been so easy.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - GAXX #6424
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Vallejo 73823 - Model Wash - Weathering FX - Slime Grime Light - 40mL Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Blue Grey is recommended for vehicles with a Panzer Grey base color, as well as all vehicles with a similar grey base.
HO scale Picket Fence - Kit
Easy-to-assemble HO Scale Fences from Woodland Scenics feature modular design and include gates, detailed hinges and planter pins for easy installation. Each fence kit includes parts to build 192 scale feet of fencing. Fences for all kinds of scenes are available as part of the line of Woodland Scenics N Scale scenery details.
HO RTR 48Ft Husky Stack Wellcar - NWCX #984
Detailed Information
MODEL FEATURES - 48Ft HUSKY STACK WELL CAR:
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
48Ft well cabable of carrying 20Ft - 48Ft containers on the bottom and up to 53Ft containers on top
HO Custom Oil Barrels - Pennzoil (5pk)
Pre-painted black and yellow and labeled in Pennzoil brand.
HO 60ft Hi-Cube Plate F Boxcar - TBOX #889550
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO Scale Thrall 53Ft Articulated Well Car Set - TTX (Blue Ex-BRAN) #888685 (3pkg)
Features:
Each car consists of three wells--A,B & C.
Walkway variants specific to prototype
Etched metal detailing
Detailed air reservoirs
Detailed brake valves
Sharp hand grabs and stirrups
Runs on 18inch radius
Recommended for 22inch radius
Floor pin holes for Atlas and other brands of containers
Product Information
When the domestic intermodal container market settled out in the late 90s, the 53Ft long container emerged the winner. Car builders responded with new wells of like size to accommodate the new standard. Introduced in series service in early 2000, Thralls triple 53Ft articulated well car was certainly the best looking of the 53Ft wells. Angular wheel cutouts, 3 flared-bottom wide and 8 narrow side posts give this intermodal age well car character.
HO MLW M630 - DCC & Sound - CP Rail (Multimark) #4561
8inch stripe w/ water expansion tank and ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound V5 decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Illinois Central Gulf Rack / Trailer-Train Flatcar TTBX #965506
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO EMD GP9 Phase II, High Short Hood - DCC & Sound - Grand Trunk Western GTW #4922
Loksound 5
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today. Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21mtc connector
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
A great starting point for a custom-build, features of this model include:
Dynamic w/48inch fan and nondynamic long hoods
Single fuel filler on sill
Drop steps
Footboards
8 styles of MU stands and receptacles
MU hose clusters front and rear
Ratchet- and Peacock-style handbrakes
Steam generator and piping
Pyle (early and late) and Mars dual-sealed beam headlights
See-through 36inch and 48inch fans w/separate blades
Roof-mounted air tanks and piping (-torpedo tubes-)
Rounded and Square winterization hatches
Harco, C&O, Super lifting and non-lifting and N&W-style spark arrestors
Folded-style cab window deflectors
Canvas and metal sunshades
Two all-weather cab windows
Blomberg Type B sideframes w/separate swing hangers and brake cylinders
Roller bearing, sloped, square and plain bearings
Separate speed recorder and Automatic Train Stop (ATS) shoe
Two styles of fuel tanks; 1200/600-gallon fuel and water and 1600-gallon
Evans X72A Box car: APASCO - GE Leasing - Single Car #6077
Detail Variations:
6-pack includes the following numbers:
#6005
#6040
#6077
#6112
#6122
#6150
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
13/32 inch Vertical Railing (2pcs)
Use for hand rails, stair rails, roof trusses, grating and other steel structures. Precision Injection Molded in Styrene Plastic. May also be used for trellises, fencing window bars, etc.
SCALE
ALL
MATERIAL
STYRENE
COLOR
VARIOUS
HEIGHT IN INCHES
13/32
HEIGHT IN MM
10.3mm
WIDTH IN INCHES
3/32
WIDTH IN MM
2.4mm
THICKNESS IN INCHES
.050
THICKNESSS IN MM
1.3mm
LENGTH IN INCHES
6-7/8
LENGTH IN MM
175mm
HO 53ft Singamas Corrugated-Side Container - XPO Logistics
(white, black, red)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #6
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
With Short Extended Couplers 1 Pair
with Short Extension Magne-Matic couplers - Assembled
For Con-Cor and Bachmann cars, rolling stock
This style, considered -modern era- came on the scene in the late -60s.
Micro-Trains trucks feature detailed sideframes molded in durable engineering plastic
HO EMD SW9 - DC/ Silent - Erie Lackawanna (EL Gray & Maroon) #437
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Erie Lackawanna:
1970 Repaint
Optional -beehive- style spark arrestors with short stacks in polybag
Deck mounted side handrails
Carbody style handrails
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO H21A 4-Bay Hopper - K Brakes - Pennsylvania (PRR Red, Circle Keystone) #173648
1930+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Small Business Centre Center
Kit - 18-1/4 x 10-7/16 x 5-1/4 inches - 46.3 x 26.5 x 13.3cm as shown
A fixture of contemporary industrial parks, the Cornerstone Small Business Center is a perfect location for any HO Scale start-up company! Based on similar tip-up style structures seen all across North America, the kit includes a modern front facade with large office-style windows and entry doors, as well as a raised sidewalk, while the back wall provides easy access and a drive-in door for trucks
Part of the Cornerstone Modern Industrial Park series - read more here!
Great location for modern small businesses and light manufacturing operations
Contemporary facade with large office windows and double doors for front & side entrances
Raised walkway simplifies scenery construction for authentic higher front parking lot and lower truck dock on back wall as seen at many facilities
Four correct height truck dock doors with weather bellows/seals and inside loading door
Printed signs for a variety of businesses
Tip-up concrete panel construction fits layouts from the 1980s to the present
Build in multiple configurations or customize in minutes with molded cut lines, expand with additional kits or build bigger with add-on accessories available separately
Electrical box, roof vents and four roof-mounted air conditioners included
Modern square security lights - upgrade to working models with Modern Wall Light 3-Pack (949-4318, sold separately)
Molded in 5 colors and clear plastic
HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Circle Keystone w/ Coal Slogan) #256661
1941+
Full slogan reads -Coal Goes to War-.
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Athearn HO Scale - RTR 30,000 Gallon Ethanol Tank Car - CHSX - #255010
Detailed Information
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
Exclusive London Transit Commission (Orange/Brown)#138 13 - Wellington Rd
Detail Variations:
Early-style engine door
4-window exit door
all other parts in polybag
Standee Windows
Deluxe New Look Bus models also feature:
Interior lighting
Working headlights and tail lights
Illuminated front destination sign
Painted seatback handrails
Two-tone seats (where appropriate)
A 9-12 volt DC power supply (not included) is required to power the lighting features.
HO EMD SD70ACe - ESU(R) Sound & DCC - Canadian National #8004
(red, black, white; Web site)
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Thousands in service from 2005 to the present
- Fully assembled
- 21-pin DCC plug
- Easily handles 18 inch radius curves (22 inch or larger recommended)
- Six powered axles per unit
- Molded drill starter points for grab irons - easily added with the EMD Diesel Detail Kit (910-251, sold separately)
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
Equipped with ESU Sound for DCC and DC layouts featuring:
- 4 function outputs with brightness control by CV
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch prime mover sounds
- Compressor
- Dynamic brake
- Multiple realistic LED lighting effects
-High or low headlights per prototype
- Working front ditch lights
- Constant and directional lights
Same powerful drive as WalthersProto(R) locos featuring:
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant and directional LED lights
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
HO 53ft Railgon Gondola - Conrail #587105
(Boxcar Red, white, Quality Logo)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Lightweight Coach - Missouri Pacific - Jenks Blue #480
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO Lightweight Coach -VIA Rail Canada #5647
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO Trinity 3-Bay Hopper - DJTX #96087
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
Ultrafine high quality pigment for modelling.
The definitive collection of pigments designed exclusively for modelers. A series of basic necessary and frequently used colors mixable between. AK Interactive pigments are much finer than any of the existing products on the market and contain nearly 3 times the quantity of other leading brands at a lower price .These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve. Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.
HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Early Yellow) #475264
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Early Yellow) #475027
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
HO GP40-2 Diesel - DCC Ready - Seaboard System #6608
SBD FEATURES:
- Ex-SCL and Ex-L&N
- Nose headlight
- 5-Chime horn
- Fire cracker antenna
- No plow
- All-new artwork provided by noted SBD railroad experts
ROAD NUMBER SPECIFIC FEATURES:
#1640
- Early phase
- Ex-SCL
- Chicken wire grilles
- 3200 Gal fuel tank.
#6608
- Mid/Late Phase
- Ex-L&N
- Q-fans
- corrugated grilles
- 3800 Gal fuel tank
- exhaust silencer
- front anti-climber
#6615
- Mid/Late Phase
- Ex-L&N
- Q-fans
- corrugated grilles
- 3800 Gal fuel tank
- exhaust silencer
- front anti-climber
GP40-2 LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18 inches
EMD/Blue #1204 - DCC Ready
EMD Demo/Lease -Blue
Leader PTC Antenna Array
New feature: Water sight glass
SD70ACe AND SD70M-2 SPECIFIC FEATURES
Correctly-sized operating ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or -tube- style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Standard grille or Canadian-style -louver- dynamic brake intakes
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Different jacking pads
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
New version HTCR or HTSC trucks
Non-sound QuickPlug equipped with NMRA 8-pin and 9-pin DCC plugs
McHenry scale knuckle spring couplers
Minimum radius: 18inch
Recommended radius: 22inch
N Scale Short Barrel Ore Hopper - CN Mineral Brown #346054
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
New York Central #1842 - ESU DCC & Lok Sound
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, can motor, flywheels, nickel silver wheels with RP25 flanges and KD® couplers. Analog (DC) version features NMRA 8 & 21 pin plug for DCC, DCC/Sound version features LokSound Select Dual-Mode decoder which allows locomotive to be used on DC as well as on DCC layouts.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AWWX #4631
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Metal Tire Changer/Air Dispenser - Pre-painted & Labeled
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200080
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
HO USRA CPR Clone Boxcar: Canadian Pacific - Late #235636
Detail Variations:
As decorated post-1960
Equipped with wood doors
Rapidos CP clone USRA single-sheathed boxcar features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Scale G2 SD90MAC Diesel - DCC & Sound - Canadian Pacific #9112
Detailed Information
CP FEATURES:
CP-specific cab and access doors
Front only ditch lights mounted above the walkway
As per prototype, ground light only on engineer side.
Raised walkways for snow management
Dual trainlines
No blue flag holders on engineers side of cab
CP Golden Beaver paint scheme
Canadian Pacific purchased 60 SD90MACs with delivery beginning in 1998. Their purpose was to pull freight between Ontario and British Columbia. The entire fleet has been rebuilt into SD70ACus as of 2020.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Scrap Yard Conveyor - Kit
Product Information
The prototypes for the Walthers Cornerstone Scrap Yard Conveyor receive cut scrap metal from the Ferrous Shear or bales from the Baler-Logger and moves them into a truck or gondola for shipment. Sometimes the material is piled on the ground where it can later be picked up by an electromagnetic or grapple-type crane.
While offered as an accessory for use with the Walthers Cornerstone Washington Salvage Scrap Yard kits, this conveyor is an ideal addition to any industry that processes scrap metals. Scrap yards, the steel industry and economic markets are closely linked. The demand, and the price paid for scrap governs how long a yard will store or how quickly it sells its scrap. If demand or prices are low for any product, volumes for that product build up and the piles get high. When demand and prices rise, stored volumes are sold off quickly to generate a profit. Washington Salvage Scrap Yard is actually two businesses - an auto salvage business and a scrap business. Washington Salvage Scrap Yard includes plastic kits and ready-to-use cast resin details. The plastic kits are easy to assemble and come with complete instructions.
Great detail for metal processors or industries with scrap steel
Concrete base and steel supports
Easy-to-build plastic kit
Molded in appropriate base color
Measures: 9-1/4 x 1-3/4 x 3-3/8inch (23.4 x 4.4 x 8.5cm)
Carving Plaster (3.5 lbs)
Carving Plaster is a unique plaster with an extended application time and carves easily when dry. Use it to carve rock faces, bridge abutments, piers and other custom terrain and structure formations. Scores easily for stone, brick and cobblestone effects. Great for arts and crafts. Accepts Earth Colors Liquid Pigment.
Net Wt. 3.5 lbs (1.58 kg)
HO SP 3/4 Dome-Lounge w/Fluted Sides - Southern Pacific (Overland) #3602
-Overland Style
Rapidos SP Dome Lounge Cars Features:
Designed from original blueprints and field measurements of existing cars
Two fully-detailed interior configurations
Multi-colour interior decoration
Two underbody arrangements
Accurate interior and exterior paint and decoration
Full flicker-free track-powered interior lighting
Lighting (prototypically) in the dome roof
Accurate free-rolling trucks
Metal magnetic knuckle couplers
HO GE 44 Tonner Phase Ic - DC/DCC/Sound - Rio Grande (Black & Yellow) #38
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
N Scale 52Ft Mill Gondola - NOKL #322204
Detailed Information
MODEL FEATURES:
Body-mounted McHenry knuckle couplers installed
Fully assembled and ready for your layout
Screw mounted trucks for accurate tracking
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO 70 Ton 13 Panel 3-Bay Hopper Car - Penn Central (H37B) #458824
Ready to Run.
Features:
Crisp details and sharp painting and printing,
metal wheels and knuckle couplers.
Tru Color Paint 080 - Acrylic - Imitation Aluminum - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO New Look Bus Milwaukee County (MCTS)
Destination Sign:
Milwaukee
Detail Variations:
Left-side Emergency Door
4-window exit door
Early-style engine door
Standee Windows
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20186
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Tru Color Paint 084 - Acrylic - Maersk Sealand Blue- 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
These decoders are built to eliminate annoying motor hum and buzz at slow speeds.
This HO sized decoder is designed to fit Locomotives with a 8 pin socket such as:
Kato RS2/RSC2 and C44-9, SD40-2, SD45, Stewart VO-1000, Intermountain F7, Atlas U23B and U30B,U33C, U36C, C30-7, U23B, GP40,AEM-7, GP7, Bachmann Spectrum Steam, locomotives, LifeLike FA1, ER Models Sharknose, Fp7, in HO Scale. The easiest installation possible, just plug it in! 1.3 Amp rating (2 Amp peak). Six function outputs and Silent RunningTM too! Size: 0.80inch x 0.65inch x 0.110inch.
HO Half-Rounded Top Spark Arrestors - F-Units & Early GPs (1 Pair)
LOCOMOTIVE FEATURES:
No.4696
Ex-EMD Lease unit. White cab roof
CSX-style GPS Dome
Large EMD plow
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
HO 60ft Hi-Cube Plate F Boxcar - Union Pacific #354455
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO Greenville 86ft Double Plug Door Box Car - Wabash #55070
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: August 2021
Wabash -Original 1964- 1965+ Era is one of the many -classic- 1960s schemes seen on these cars, and represents one of the last schemes the railroad wore before being merged into the Norfolk and Western! This rolling billboard features Wabashs classy dark blue scheme with large Wabash lettering, and then undoubtedly the largest Wabash flag applied to any rolling stock, adorned with the -Follow the Flag- logo. Pure class. These cars were delivered in 1964 with full running boards but were soon modified in 1965. These significant modifications included the removal of the roof running board, the lowering of the brake wheel housing and removal of high grab irons and end ladders. Our Wabash model replicates this 1965+ look with exact features: an accurate 1964-built body, bolt -remnants- on the sides and ends of the model, and a roof with the old bolt locations of the running board supports! The features go on and on, including an accurate -lowered- Miner hand brake, 1965 replacement full-width Apex crossover platforms, 70T trucks with 33inch wheels, truck-mounted brake details and rotating Brenco-6 roller bearing caps. This stunning model is available in four numbers. (Please note there is no SKU 1/2 for this production).
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Norfolk & Western
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
HO Code 83 Snap Track - 9in Straight Sections (6/pkg)
PS-2 2003 2-Bay Covered Hopper - MILW (4-pack)
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
N Scale AutoFlood III RD Coal Hopper - CEFX - 6 pack #2
Contains Road Numbers:
600530
600547
600555
600568
600580
600593
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO Enterprise 2-Bay Covered Hopper - MSGX (Flo-Sweet) #223
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO 60ft Hi-Cube Plate F Boxcar - Union Pacific #354543
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Nickel Plate NKP (6pkg)
6-Pack includes the following numbers, all individually packaged: #17405, #17486, #17438, #17514, #17546, #17691
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Pressureaide Covered Hopper - OMYA #51066
(white, blue)
HO 1950s Sedan - Red
MODEL FEATURES:
- Factory assembled with detail parts applied
- Molded interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
- Beacon or taxi sign where appropriate
HO Alco FA-1 - DCC & Sound - Canadian Pacific (Script Scheme) #4025
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO 60ft NSC 5150 3-Bay Covered Hopper - Archer-Daniels-Midland (ADMX) #52293
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200140
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
Vallejo 73801 - Model Wash - Weathering FX - Russian Splash Mud - 40mL Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Blue Grey is recommended for vehicles with a Panzer Grey base color, as well as all vehicles with a similar grey base.
N Scale FM H-24-66 Phase 2 Trainmaster - Gold DCC & Sound - Canadian Pacific (Late) #8913
Features:
Ends with large number boards and a single headlight
Golden-white LEDs
Directional lighting
Painted safety rails
Etched metal grilles
Blackened metal wheels
Factory-installed AccuMate magnetic knuckle couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
Follows all NMRA DCC standards and recommended practices.
ESU LokSound Features (GOLD LOCOMOTIVES ONLY):
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are up to 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided for true realism.
AccuMate couplers are made under license from AccuRail, Inc
HO Scale GP38 - DC/DCC Ready - CSX (Grey, Blue & Black/ S Scheme) #2046
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO Waterslide Decal - Internet Era Business Signs Vol. 1
Description:
Internet Era Business Signs like Sysco, Pinnacle Builders, Potential Industries, PGI, Liberty Lincoln and others.
All Scale Classic Trees - Ready Made - Apple Trees 2-3inch (4 pkg)
2 to 3inch 5.1 to 7.6cm tall
Product Information
Make Realistic Scenery in Minutes
Give your layout a change of scenery with Woodland Classic Trees from Woodland Scenics. Fully assembled and ideal for foreground detail, the selection includes several types of trees along with hedgerows. The models are finely detailed with painted, flexible trunks and foliage with natural contrast to enhance any layout or diorama. A unique planting pin and detachable base allow for temporary placement, or ease of removal for cleaning and maintenance. Easily mixed and matched to capture the variety found in nature, trees range from 3/4 to 9inch tall, making them ideal for modelers in all popular scales.
60ft Pullman-Standard Flatcar - Ready to Run -- TTX VTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Tru Color Paint - Acrylic - CSX (Y2K) Gray - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Chinese Red) #5307
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15452
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended.
HO EMD GP40 - DCC Ready - RF&P (Blue and Grey) #122
1982+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Sterling Salt #48921
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
SmokeBox Graphics Compressed Lettering Boxcars
Decal set covers leased boxcars including BKTY, EEC, LRS, WRWK, and others using distinctive compressed lettering. Full data and stencils for up to four cars, billboard lettering for two. Includes truck side frame reporting marks, red brake shoe labels, and green cleaning stickers. View. Pairs well with our dark yellow reflective strips
HO Modern Yard Tractor - Norfolk Southern #562821
Completely assembled
Many separately applied parts
Interior details
Rubber tires
Photo-etched steps and rear deck
Adjustable 5th wheel height
Clear window glazing
As seen in intermodal yards around the country
PROTOTYPE AND BACKGROUND INFO:
A terminal tractor, also known as a yard tractor, is a kind of semi-tractor intended to move semi-trailers within a cargo yard, warehouse facility, or intermodal facility, much like a switcher locomotive is used to position railcars.
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21294
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar CSX
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
HO Gunderson 6276 50Ft Plate F Boxcar - COER #101891
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
Plastruct Inc. 2 - Plastic Weld - Plastic Solvent Cement - 2oz (59.1mL)
A colorless, liquid, plastic-fusing adhesive. Dissolves a thin layer of each surface to form a welded joint as strong as the surrounding area. Bonds styrene, ABS, butrate and acrylics.
HO 85Ft General American G85 Flatcar - GTTX (Brown) #300330
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
HO Bathtub Coal Gondola - MLMX/ Sims Metal #322
Built: 10-08
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO G2 Dash 9-40C - DCC Ready - Norfolk Southern #8777
NORFOLK SOUTHERN FEATURES:
- Thoroughbred paint scheme for 2013-2014 to 2018 appearance
- Each road number decorated different per repainted status
- Curved engine compartment hood profile
- Early tabbed dynamic brake intake panels
- Vertical mounted struts mounted on side frames with 40 inch wheels per prototype
- #8777: Early dynamic brake exhaust fascia
- #8820 & #8855: Late dynamic brake exhaust fascia
- Sound version features onboard DCC decoder with SoundTraxx Tsunami2 sound
DASH 9 SERIES LOCOMOTIVE FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Coupler cut levers
- Flexible rubber MU hoses for durability
- Flexible rubber trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Fine-scale Celcon handrails for scale appearance
- Windshield wipers
- Lift rings
- Wire grab irons
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Sander lines
- McHenry scale knuckle couplers - Kadee compatible
- Genesis drive line with 5-pole skew wound motor, precision machined flywheels, and multi-link drive train
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
SOUND EQUIPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO USRA Composite Drop-Bottom Gondola -Ready to Run- Michigan Central #12165
Date: BLT 8-19
All are Ready-to-Run
-Laser Cut Wood Sides and Floor
-Laser Sharp Painting and Printing
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO 68Ft Bulkhead Flatcar - TTX (Forward Thinking) #804309
Features:
Side stake pockets
Simulated tie-loops
Fishbelly center-sill
Prototypical pull-plates and lift rings
HO 5820 Covered Hopper - Procor/UNPX (BF Goodrich) #122157
Era: 1978+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
Single Lamp Post Street Light - 3 sets
Use to light street corners, sidewalks, parks and more. 20mA/set RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 0.484 in w x 2.76 in h (12.3 mm w x 70.1 mm h)
Brickworks Storage Building -- Kit -
-Typical of storage & transfer buildings moving loads from road to rail from the 1920s to the present
-Perfect for modeling sorting sheds and shipping buildings at any brickworks
-Easily adapted to all kinds of industries big or small
-Realistic corrugated siding, two loading platforms and positionable dock doors
-2 large and 5 small brick stacks, with 12 pallets included for added realism
-Molded in four colors
9 x 4-1/4 x 3-1/2in 22.5 x 10.6 x 8.7cm
HO EMD SW9/1200 - LokSound 5 Sound & DCC - Undecorated
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- ESU LokSound 5 sound for DCC and DC layouts
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
Tin Shack
Assembled - 1-7/16 x 1-3/16 x 1-3/16 inches
It is rusted metal walls and weather beaten door shows its true age after standing tall for nearly thirty years through the rain, sun, and snow. The building includes a corrugated metal roof and walls with a little rust and a wooden door. A barrel of iron and an old wheel can be seen leaning against the wall. Exterior details are unattached for customized placement or addition to other structures. Add along the track or behind factories, businesses, and homes to create even more realistic detail.
HO Scale - 1937 Studebaker Single Axle Stake Body Truck - Unpainted and Resin Cast Kit
4785 PS2-CD Covered Hopper - Late End Frame - Round Hatch - Lauhoff Grain #36020
HO Trinity 3230 Covered Hopper - Greenbrier Management Services (BNBX) #95486
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
The Trinity 3230 Pressure Differential covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) #485444
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO New Look Bus Edmonton Transit - Route 51 to Capilano #511 Deluxe
White Scheme
Deluxe New Look Bus models also feature:
Interior lighting
Working headlights and tail lights
Illuminated front destination sign
Painted seatback handrails
Two-tone seats (where appropriate)
A 9-12 volt DC power supply (not included) is required to power the lighting features.
HO MP15DC Gold - DCC & Sound w/ Ditch Lights - Norfolk Southern #2368
Features:
Three different hood styles (angled air filter box, square air filter box, standard hood)
Exhaust stacks: with or without muffler
Long hood sand fill: recessed or extended
Rear sand fill: Three variations of sand boxes behind cab
Pilot: standard or with snow plow
Additional Features:
Separately-applied scale detail parts include: windshield wipers, metal grab irons, coupler cut levers, multiple-unit hoses, snow plow, train line hoses, fine scale handrails, and more!
See through step detail on sill
Etched metal radiator grilles
Painted crew members
Factory-equipped with AccuMate knuckle couplers
Coupler pocket designed to accept AccuMate Proto-couplers
Five-pole skewed armature motor w/ dual flywheels for optimum performance at all speeds
Directional lighting with golden-white LEDs
Atlas Master Series Gold Features:
ESU LokSound decoder, supporting all DCC programming modes.
Flexible mapping of function keys F0 to F31.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor and more.
9/32 inch OD Round Brass Tube - 0.029inch Thick x 12inch Long
Round Brass Tube (1 pc)
Outside Diameter: 9/32 inch
Airbrush Cleaning Kit
Iwata Airbrush Cleaning Kit includes the same great tools Iwata Technicians use to clean and restore airbrushes to perfect working conditioning. Containing all the essential cleaning items including; Medea Airbrush Cleaner, Medea Thread Sealer, Extra Small Cleaning Brushes, Non-Shedding Pipe Cleaners, Iwata Nozzle Wrench, Iwata LED Magnifier, Iwata Premium Airbrush Lubricant and Illustrated Step-by-step cleaning instructions you will be well on your way to perfect airbrush maintenance any time.
HO FM H16-44, With Sound & DCC, Canadian National: Wet Noodle Scheme No.2217
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Mobilgas #201
Date: BLT 9-28
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
Pre-painted & Labeled Metal Gas Pumps - Dlx Conoco
- Pre-painted and decorated with the logo of the company named.
N Scale Common Standard Low Switch Stands - Kit (4pk)
HO Code 83 Nickel Silver Rail Only - Weathered 3ft (33pk)
HO Intermountain 4-Panel Coalporter, Canadian National
CNA Website scheme
Features:
Sharp Painting and Lettering
Prototype Accurate Paint Schemes
Multiple Road Numbers
InterMountain 100 Ton Trucks with 36in Metal Wheelsets
Metal Knuckle Couplers
Spray Can - Silver Leaf (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO GP9RM - DCC Ready - Canadian National (Stripes) #4105
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
Model Wash - Light Rust - 35ml Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Light Rust is recommended for rust effects and winter scenes, cold scenes and decay or abandoned vehicles, metallic structures or all kind of metallic parts.
Figurines - Ordinary People (6)
HO FMC 4700 Covered Hopper - NAHX (3pk)
MODEL FEATURES:
- Separately-applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, -brake cylinder and triple valve
- 100-ton trucks with 36 inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
- Factory applied roof walk, roof hatch, end details, ladders, and wire grab irons
- Two outlet grate variations
- Accurately painted and printed on a highly detailed, injection molded body
- See-through etched metal end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- All 3-packs feature unique road numbers
- Minimum radius: 18 inches
N Scale RTL Turboliner Coach/ Snack Bar - Amtrak (Phase III Late) #186
The Rapido N Scale Rohr Turboliner features:
Accurately designed using original blueprints and field measurements
Tinted windows, interior details and flicker-free interior lighting
Separate factory installed grab irons
Highly-detailed trucks including third-rail shoes
Working headlights, marker lights and cab-mounted strobe lights
Both Power Cars come with smooth, reliable drive systems for optimal performance
All wheel electrical pickup. Yes, we mean every ... single ... wheel!
Rapido Trains Inc. is pleased to bring speed to the rails with the Amtrak Rohr Turboliner in N Scale!
In the early days of Amtrak, efforts were made to improve passenger services along key corridors. Following the success of the French-built RTG Turboliners in the mid-1970s in the Midwest, Amtrak turned to Rohr Industries in California to build modernized Turboliners for use along the Empire Corridor.
Entering service starting in September 1976, these new RTL Turboliners quickly proved their value, bringing passengers back to the rails. Equipped with third-rail shoes, they operated on electric power through New Yorks Grand Central Terminal (and later Penn Station), switching to gas-turbine power once out of New York City. Painted in Amtraks stunning red, white and blue Phase III paint scheme, they operated on most Empire Corridor services, as well as regular appearances on the Adirondack to and from Montreal in the early years. Occasional equipment needs even put the Turbos on other rare adventures outside their normal call of duty, including the Niagara Rainbow to Detroit via Southwestern Ontario, and the Maple Leaf to Toronto via Niagara Falls.
After nearly 20 years of service under their belts, Amtrak selected one RTL set in 1994 to be rebuilt into what would be called the RTL-II, incorporating several improvements including new turbines, a remodelled interior, a striking new demonstrator paint scheme, in addition to extending the lifespan of the set for several more years. While this set continued in service until 2003, no other RTL-II sets were ever commissioned.
Further redevelopments and improvements of the fleet into the RTL-IIIs was never fully realized, and all were retired from active service in 2004. Conventional equipment has since been utilized on the Empire Corridor services in place of the once mighty Turboliners.
CNR Long Barrel Ore Car - Five Pack - Unpainted and Resin Cast Kit
RTR 52Ft Mill Gondola, CW/ Oregon Steel #5000
MODEL FEATURES:
Fully assembled and ready for your layout
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
33In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
Open top cars, such as gondolas, have been a mainstay on railroads for decades as they are ideal for carrying large, bulky loads such as coil steel or scrap metal loaded by crane.
Tangent Scale Models Delivery 1969 - Gunderson 6089 50ft BoxCar D&RGW
Denver & Rio Grande (D&RGW) Delivery 1969 is an exciting release for us. The distinctive D&RGW Grande Gold orange paint coupled with black ends and carefully added roof overspray makes a model that is simply stunning. The prototype Rio Grande graphics were carefully fitted to the available 7 panels of space to the right of the doors. The white paint at the tops of the ends reminds you that this is a high-cube car. The Rio Grande cars feature truck mounted brake details, faithfully replicated with accurate truck-mounted brake beam details and no body-mounted brake cylinder on the Hydra-Cushion underframe. The Tangent D&RGW model also features accurate unpainted Morton style crossover platforms, early 5-board large tack boards on the sides and ends and an Ajax handbrake. Don?t forget to check out those accurate Hyatt rotating roller bearing caps on the 70-ton Birdsboro foundry Barber S-2 trucks!
Product: Gunderson 6089 50ft High Cube Boxcar
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Birdsboro foundry Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 33in Wheels
N Scale Curved Track - 7 inch, 45-Degree Curve (4pk)
(Need 8 Pieces for a Complete Circle)
HO 1957-1965 Cadillac Eldorado Brougham - Ebony, Stainless Steel