Circuitron 5303 - Snapper Switch Machine Power Supply
Snapper Switch Machine Power Supply
ESU 54672 HO/ N Scale Power Pack Energy Storage For Lok-Sound
Power Pack Energy Storage For Lok-Sound
245-UR93 Digitrax UR93 Duplex Radio Transceiver
Digitrax UR93 Duplex Radio Transceiver
Digitrax LNWI LocoNet WiFi Interface
Digitrax LNWI LocoNet WiFi Interface
Walthers Layout Control 101 - Universal Switch Machine - Vertical
Universal Switch Machine - Vertical
ESU 50310 - Cab Control Wireless DCC System w/WiFi Throttle
Cab Control Wireless DCC System w/WiFi Throttle
Soundtraxx 886007 - HO & N Scale TSU-N18 Tsunami2 Sound Decoder for Electric Locomotives
HO & N Scale TSU-N18 Tsunami2 Sound Decoder for Electric Locomotives
Digitrax SDCK Signal Driver Cable Kit
Signal Driver Cable Kit
Digitrax EVOX - Evolution Express Advanced 5A/8A - Starter Set
Evolution Express Advanced 5A/8A - Starter Set
NCE 205 - All Scale BD20 - Block Detector Module
All Scale BD20 - Block Detector Module
Digitrax LT1
Tester for Decoders & LocoNet Cables
NCE 200 - Auxiliary Input Unit (For Block Detection)
Auxiliary Input Unit (For Block Detection)
Walthers Cornerstone 2321 - HO & N Turntable Advanced Control Module - For DCC Operation
HO & N Turntable Advanced Control Module - For DCC Operation
Digitrax DCS52 - Zephyr Express: All-in-one Command Station/Booster/Throttle - Starter Set
Zephyr Express: All-in-one Command Station/Booster/Throttle - Starter Set
DCC Specialties RRamp Meter V1
DCC Specialties RRamp Meter V1
Snapper Switch Machine Power Supply
Solid state, provides positive power to dual-coil switch machines. Protects from burnout due to stuck pushbuttons, short circuits, etc. Operates off accessory terminals of power pack or transformer up to 25V. 24V input can activate 5 to 10 coils simultaneously if connected to same control. Instant recycle time. Includes a section of Printed Circuit Mounting Track (PCMT).
Power Pack Energy Storage For Lok-Sound
The new ESU PowerPack Maxi has been developed as the powerful complement to the LokSound L V4.0 decoder. It can, of course, provided there is sufficient space, also be connected to all LokPilot V4.0, LokSound V4.0 or LokSound V4.0 M4 decoders. It provides uninterrupted power to your locomotive when traversing dirty track and long turnout ladders. All sound, lighting and motor functions are buffered with the aid of two energy storage capacitors enabling your models – subject to the total energy consumption - to continue running for up to three seconds.
The PowerPack Maxi incorporates an integral charging circuit controlled by the decoder. Therefore it may be connected even during programming. The charging current is limited in order to avoid an undue load on the booster, in case there are several models in the same booster sector.
The buffer time can be reduced by means of a CV. This may be useful to assure the correct stopping position ahead of signals showing the Stop aspect (red signal).
The space requirements of the PowerPack Maxi of about 27.5 mm x 15.7 mm x 13 mm must be taken into account when installing this unit.
A three-pole wire harness connects the PowerPack Maxi to the decoder. The wires are already soldered to the PowerPack Maxi but must be soldered to the appropriate solder pads of the decoder.
Please note that due to technical reasons the PowerPack cannot operate in analogue mode: Buffering is therefore not possible in analogue mode.
UR93 Features:
Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support).
More than double the radio range of UR92 Duplex units.
Improved multi-path performance for cluttered layouts.
Plug and Play setup, PS14 Universal power supply included.
Compatible to be mixed with UR92 LocoNet Duplex Radio systems, for added coverage and improved reception.
Status LEDS.
Supports combinations of DT602D/DE and DT500D, DT402D and UT4D Duplex Radio throttles.
UR93E available for countries that require EN-300-328 Wireless conformity.
Digitrax LNWI LocoNet WiFi Interface
The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. The apps available can be downloaded from this page.
Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile Wi-Fi devices and Apps.
Compatible with most Android and Apple devices running supported throttle apps
Easy Setup and Configuration. A single LNWI works out of the box, with no additional configuration required.
Provides up to 32 LocoNet Throttle functionality per LNWI, with compatible apps and Command Station.
Up to 8 LNWI can be supported per LocoNet
Multiple LNWI units automatically resolve SSID with no additional configuration
Optional Wi-Fi WPA2 security for layout operations in public.
Option switches to fully customize all device settings
LocoNet Compatible
Universal Switch Machine - Vertical
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC or DC power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator-control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
The Walthers Layout Control System Vertical Switch Machine features:
- Fully assembled, servo-based unit with approximately one second throw speed
- Integrated DCC accessory decoder
- Two built-in 5A switches to power turnout frogs, signals, track blocks and more
- Self-locking mechanism for reliable positioning - servo power turns off when motion is complete
- Adjustable throw and tension from 1/32 inch to 1/2 inch for turnouts in any scale from Z to O
- Factory-assembled with output rod in centered position for fast and easy under-benchwork mounting
- Wire in minutes with included cables
- Outputs for both single or bi-color LEDs
- Connecting cable included - easily expanded with Connecting Cable (#942-112, sold separately)
Cab Control Wireless DCC System w/WiFi Throttle
(7Amp, Set with power supply 110V-240VA, USA, Output 15-21V)
Cab Control Features:
- All DCC modes (14, 28, 128 speed steps) Long and short addresses
- Over 16,000 locomotives can be arranged and controlled
- Up to 28 functions per locomotive
- All Scales can be used with the Cab Control system with the variable voltage 7Amp Power Supply
Built-in WLAN Access Point:
- Creates a unique Wifi-Network for your Mobile Control II Wireless throttles
- Supports at least 32 Mobile Control II Wireless Controllers Compliant with all relevant IEEE WLAN standards.
- Suitable for use in America and Europe
- The Cab Control features a LAN port to connect the box to your home network.
- Via the home network, the Cab Control can be connected to Model Rail Road Control Software.
ECoSlink port:
- For easy connection with our ESU boosters, Cab Control supports ECoSlink, a high speed, CAN based bus system.
- The Cab Control built-in booster has so much power that, in most cases, you do not need additional ones.
HOOK UP:
Hook up is simple with the Cab Control system. All you have to do is plug the 7 Amp power supply into the Cab Control box and then hook up your Cab Control box to your track for track power and its ready to go! The wireless controllers automatically connect to the system via WLAN.
UPGRADABLE:
On occasion new features will be added to the Cab Control system. Gone are the days of having to send your DCC command station back to the manufacturer for updates! When a new update becomes available it is as simple as loading this to a USB Data stick and plugging it in to the back of the system. Easy!
PROTECTION:
Each Cab Control system meets the relevant requirements regarding safety and operation on a layout. The track outlet is protected against overload as well as short circuits. Each Cab Control system can differentiate between a genuine short, and a momentary current drain when passing over switches or gaps. We place value on the indestructibility of the device, just like we do with our mobile decoders.
EXPANSION:
As the Cab Control System uses the ESU Mobile Control II Wireless Throttles, expansion is easy as these throttles are already available and will connect automatically to the Integrated Control Unit. The system can also be used with the ECoSBoost Boosters using the ECoSlink Terminals when more power is needed for large layouts.
CAB CONTROL - HANDHELD WIRELESS THROTTLE
Ergonomics & Functionality Combined:
When you hold your Cab Control Throttle in your hands for the first time you will immediately notice its excellent ergonomics. All Parts of the screen can easily be reached with one hand, and unlike a cell phone throttle, the most important functions can even be reached without looking giving you the ability to watch your trains and not needing to watch your throttle. This is due to the central, motorized throttle knob with end stop. With this knob you can delicately control the speed of your trains and change direction.
For activating functions simply touch the icons on the display. The display also serves for changing functions ? exactly the same way as you know it from your mobile phone. Finally, two buttons each on either side serve for changing direction or triggering the most important functions. These side buttons are user editable giving you the choice of what you want to control with them.
Colorized Function Icons are displayed showing what function does what. Gone are the days of having to memorize what function button control what decoder feature.
Running Locomotives:
The Cab Control Throttles can control all locomotives registered in the system and supports 14, 28 or 128 speed steps. All of the important locomotive properties such as name, a picture, function mapping as well as easily identifiable icons for function buttons will be taken from the Integrated Control Unit and will be displayed correctly.
You may switch up to 28 functions for each locomotive, which, of course, can either be momentary or continuous functions. You read that correctly! EVERY Function Button can be momentary or latching depending on your use! No more limitations on how you function map your decoders.
As standards are constantly changing and the number of DCC function buttons is increased a simple update will allow for even more!
Controlling Accessories:
The Cab Control System has the ability to run over 1000 magnetic accessories!
More Fun in Operations:
The high resolution (480 x 800 pixels, 280 dpi), backlit TFT display of the CabControl Throttle always keeps you up to date on the most important operating parameters. Furthermore, you can see if another operator controls a certain locomotive or if an emergency stop has been triggered. The permanently installed, powerful Lithium polymer rechargeable battery will serve you right through the most extensive operating sessions giving 5-8 hours of operation based on how you are using your throttles. Recharge the batteries of your CabControl simply by using the USB port on the Integrated Control Unit and the supplied Micro USB Cable or the battery charger of your mobile phone or any other USB port.
Open Platform:
The Cab Control Throttles are based on the Android operating system. We have created a powerful basis for this open, globally used operating system: The ARM Cortex A8 microprocessor clocked with 1.3 GHz and controls a high resolution 3.2 inch TFT color display. A capacitive touch screen assures touch-free data entry. For communicating with the outside world there is an USB port and a WLAN interface. Thanks to the standardized radio control interface, trouble free operation of your layout can be assured at any time. The range can be extended with WLAN repeaters, if necessary.
Due to the open platform design you may add further apps for the Google Play Store at any time.
HO & N Scale TSU-N18 Tsunami2 Sound Decoder for Electric Locomotives
Dimensions: 25 x 10.5 x 4.1mm
Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output)
Function Outputs: 6
Audio Amplifier: 1 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
BIG sound in a small package! The small size of our new Tsunami2 TSU-N18 decoder makes it ideal for both N and small HO models that come equipped with a NEXT18 socket. Installations can not get any easier. Simply plug this decoder in and enjoy all of the Tsunami2 features you know and love!
You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive dynamic digital exhaust, functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. Soundtraxx also offers a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12 in each diesel version), whistles (90), airhorns (40+), couplers, dynamos and more!
The TSU-N18 can be wired to a CurrentKeeper to maintain performance over dirty track and switches.
Signal Driver Cable Kit
Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets.
Use this kit to make signal driver cables to connect your SE8c to the signals on the railroad. Make the cables any length that you desire and place the signal connectors at the locations where you will install signals. All the signals are carried neatly in the ribbon cable so you can avoid a “bird’s nest” under your layout.
Evolution Express Advanced 5A/8A - Starter Set
Everything you need to get started with Advanced Digitrax Command Control. Evolution Express is perfect for most home and club layouts. It offers excellent speed control, prototypical consisting, the full range of programming features and much more. Maximum capacity, maximum features. Take it to the max with Evolution Express!
Evolution Express Set Includes:
- DCS210+ Command Station/Booster With Intelligent AutoReverse
- DT602 Super LocoNet Throttle
- UP5 Universal Panel
- PS615 Power Supply
- Evolution Express Manual
The DT602 Advanced Super Throttle & DCS210+ Advanced Command Station Offers:
- Works with compatible LocoNet systems
- Color 2.4 inch LCD Display Screen
- Advanced menu system and displays
- Built-in scrolling help and prompting
- Soft ON/OFF switch, with zero OFF power-drain
- Advanced display Power Saving for longer wireless battery operation
- No more 9V batteries to remove! Throttles are now powered in wireless modes by 3 AA cells!
- Can use recharged AA batteries
- Available in standard tethered or Radio Duplex
- Duplex Scan for available Networks and radio signal strength. Run without cords!
- All throttles come with a LocoNet cord that can be unplugged, and is replaceable
- Dual throttle controls let you control two locos simultaneously
- Run locomotives with encoder click knobs for both speed and direction control
- Full numeric keypad makes loco selection simple
- Control light and sound effects functions with the press of a button
- Control 29 functions (F0-F28).
- Function active/inactive indicators
- Convenient step-by-step throttle option set up
- Supports simplified decoder programming
- Simplified 2 or 4 digit addressing setup
- Over 9,000 locomotive decoder addresses
- Supports turnout and stationary decoder control
- Over 2000 turnout decoder addresses
- Fast clock display
- Recall feature
- Advanced Route editor
- USB Interface
Big System Capacity for Big Layouts:
- Run up to 100 addresses at the same time on your system.
- Run up to 100 throttles at the same time on your system.
Over 9000 Locomotive Addresses:
- Address 00 for operation of one loco or MU consist without decoders
- Two Digit Addressing is easy to use. (Address 01-127)
- Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+)
5 or 8 Amps of Power to Run More Trains:
- Selectable Scale Voltage for Safe Operation in ALL Scales
- Customizable Voltage Settings
- 5 amps of power with included PS615 power supply
- 8 amps with PS2012E power supply (sold separately)
Function Control:
- Control 29 functions (F0-F28).
- Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
- Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities).
Two DCC Outputs are Better than One!
- Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders!
- Use one output for a braking section while the other runs the layout.
Decoder Programming:
- Built in read/write programmer lets you program and read back CV values.
- Supports Paged programming (Digitrax preferred method). Also supports direct, register and ops mode programming.
Consisting:
- Supports Universal consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even analog locos.
- Advanced consisting and Basic consisting, too!
- Nested consisting where consists can be consisted together.
Stationary Decoders, Turnout Control & Turnout Position Reporting:
- Access to stationary decoder control for turnouts and other devices.
- DT602 reports turnout position based on last command sent.
- Control 2000+ stationary decoder addresses.
Routes:
- Turnout List/Route capability to simplify complex yard operations.
- EZ routes button for simplified Command Station route programming
Customizable System Options:
- Turn audible warnings on or off.
- Set up purging options.
- Multi-format command station mode.
- Loco Reset button for easy system purging
UP5 Universal Panel:
- Makes LocoNet hook up simple!
- 2 LocoNet jacks for hooking up your LocoNet network.
- 3 throttle jacks for hooking up throttles and other non-RailSync devices.
Expandability:
- Evolution is just the beginning for large, complex layouts that emphasize prototypical operations.
- With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more.
- DCS210+ comes with 3 LocoNet ports for easy expandability and a USB interface!
Other Advanced Features:
- IPL updatable firmware for continued product improvements
- Device Query and Device Statistics to help with troubleshooting
- Input Mode to help set up detection on your layout
- Uses Expanded slots
All Scale BD20 - Block Detector Module
The BD-20 block detector module is normally used to indicate the presence of a locomotive, caboose or other rolling stock in a track section by sensing electrical current drawn by that rolling stock. Locomotives will naturally trigger the detector because they draw current through their DCC decoder. Unpowered rolling stock will not trigger the detector unless equipped with some means of drawing current from the rails such as lights or resistor wheel sets.
The BD20 needs to be as close to the section being detected as possible to avoid false detection triggered by long runs of cable. For the BD20 to work correctly ALL feeders for the section being detected must go thru the BD20. The best practice is to have one BD20 per feeder, and only one feeder per section of track. That section should be isolated from all other sections by using gaps or insulating rail joiners.
The BD20 acts like a normally open switch that gets triggered by sensing current going thru the coil. In a typical application you connect the outputs of the BD20 to something (Logic + 5 to 12vdc) that will react to a ground short. we use it to trigger the inputs of the AIU. Most signal systems work the same way.
The BD20 is a detection device and cannot drive a signal directly unless you want to use the external LED connection in some fashion. An AIU is an input device that detects a 5v line being shorted to ground, such as the output of a BD20. The AIU then puts this information on the NCE Cab Bus. Neither device (BD20 or AIU) are directly related to signaling. They do detection and notification.
Tester for Decoders & LocoNet Cables
The LT1 consists of a harness with 6 conductor Telco type wire and a male plug, a tester with a female 6 conductor jack and a protection resistor.
Auxiliary Input Unit (For Block Detection)
The Auxiliary Input Unit (AIU) provides a means of connecting external devices such as switch contacts, Block Detectors (BD20), or other sensors to the NCE Cab Bus or Command Station. These external devices can be anything that supplies an electrical connection between the input pins (1-14) and the pins marked GND Connects to the NCE cab bus using RJ12 6 wire jack.
HO & N Turntable Advanced Control Module - For DCC Operation
Product Information:
The Walthers Cornerstone Turntable Advanced Control Module makes it possible to operate your Motorized Turntable using DCC, serial UART, keypad or switch contacts. For DCC applications this circuit will function as a stationary decoder with no CV or programming required. The Turntable Advanced Control Module includes the circuit, Connection cable and complete instructions.
Adds DCC, serial UART, keypad and switch contact input modes including:
- DCC control using stationary decoder protocols
- Numeric Keypad
- Button per track
- Rotary selector switch
- Control box emulation
- Serial Rx/Tx UART port
- Digital outputs for remote dual digit display and controlling track power relays to selectively power service tracks automatically
Measures: 2-3/4in (70mm) x 4-3/16in (107mm)
Please Note: This unit is designed for use only with the following Motorized Turntables, each sold separately:
- HO Scale 90ft 933-2860
- HO Scale 110ft 933-2851
- HO Scale 130ft 933-2859
- N Scale 130ft 933-2618
Zephyr Express: All-in-one Command Station/Booster/Throttle - Starter Set
Zephyr Express gives you simple to use Digitrax Complete Train Control for a great price. It offers simplified advanced train operation for any size layout and is fully expandable. You will not have to start over when you want to do more with your railroad!
Zephyr Express Set Includes:
- DCS52 All-In-One Throttle/Command Station/Booster to run your layout
- PS314 Power supply to provide power to run your DCS52
- One LT1 LocoNet Cable & Decoder Test Kit
- Zephyr Express Quickstart Guide
- Zephyr Express Manual
- Digitrax Decoder Manual
Zephyr Express Offers:
- Cost effective entry level LocoNet Compatible system
- Color 2.4 inch LCD Screen.
- Large Backlit Keypad.
- Speed control knob and direction switch with brake.
- Integrated USB Computer Interface
- Easy 2 and 4 digit addressing.
- Smooth speed control.
Run multiple trains at once without blocking!
- Run up to 20 addresses at the same time on your system.
- Run up to 20 throttles at the same time on your system.
Jump Ports for using DC power packs as additional throttles:
- Use one or two smooth DC power packs as throttles to control DCC equipped locomotives.
- Simple, cost effective way to add more throttles to your Zephyr Express set.
- Makes it easy to share the fun of DCC with layout visitors and young operators.
- Functions on locos controlled by Jump throttles remain active.
Over 9000 Locomotive Addresses:
- Use Address 00 to run one or more locos without DCC decoders
- Two Digit Addressing is easy to use. (Address 01-127)
- Four Digit Addressing-use the number painted on your engines as its address.
3.0 Amps of Power to run multiple trains:
- Booster outputs 13V DC for safe operation in N and HO scales.
Function Control:
- Control lights and sound with 29 functions (F0-F28)
- Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
- Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder).
Stationary Decoders, Turnout Control & Turnout Position Reporting:
- Access to stationary decoder control for turnouts and other devices.
- Control 2000+ stationary decoder addresses.
Consisting:
- Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos.
- Advanced consisting, allows only advanced consist capable mobile decoders.
- Basic consisting, program decoders to run on same address.
Decoder Programming:
- Built in read/write programmer that can read and write all CVs.
- Supports Direct programming (Digitrax preferred method). Also supports paged & register mode programming.
- Operations mode programming can be used to program decoders on the layout.
Expandability with Digitrax LocoNet:
- Use Zephyr Express as a starting point for your Digitrax LocoNet System, then add components.
- Use Zephyr Express as an expansion set with Digitrax equipment you already have installed.
- Add Radio or IR via LocoNet. Just plug-in a UR90, or UR92 receiver and add IR and/or Radio throttles.
DCC Specialties RRamp Meter V1
- The only inexpensive device that accurately measures DCC Volts/Amps.
- Also measures AC and DC Volts/Amps.
- Costs less than DVMs that cannot measure DCC. Ver II rated at 10 Amps
- Measures true RMS Volts/Amps, +/- 2%.
- Suitable for all scales.
- No batteries required.
- Designed for Left/Right-hand use.
- PCB length 5.63 inches