Athearn - HO RTR PS-2 2600 Covered Hopper - Baltimore & Ohio - #600241
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
HO ACF 4600 3-Bay Centerflow Hopper - The Andersons Inc. (AEX-Ex GTW) #389
This hopper is Primed-for-Grime
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
HO RTR ACF 4650 3-Bay Hopper - Southern Pacific #496475
Date: BLT 9-79
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AABX #206023
AN OTTER VALLEY EXCLUSIVE
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
6mm Static Grass - Spring Grass (20g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
HO Scale SD30C-ECO - DCC & Sound - Canadian Pacific #5013
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
HO Fence Base Billboard - Kit - 1940s-50s Movie Stars for RC Cola (2pk)
Billboards feature movie stars promoting RC Cola.
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Maine Central - Pine Tree #802
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO 85ft ACF Dome Diner Coach w/lights - Union Pacific (Colorado Eagle) #8004
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
Unique to the Union Pacific, the Dome Diner offered patrons fine dining and unequalled views of the beautiful scenery. This car was built by American Car & Foundry in 1955 and numbered 8004. Today it is named for the Missouri Pacific streamliner that was the first to feature dome coaches.
HO GMD-1 - DCC & Sound - Canadian National (1400s Stripes) #1408
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
HO GE 44 Tonner Phase III - DC/DCC/Sound - Sante Fe (Zebra Stripe) #463
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
0.012 inch Thick Stainless Steel Flat Strip - 1/2inch x 12inch
Stainless Steel Flat Strip 12inch Long (1 pc)
HO P42DC - DCC & Sound - VIA #917
Detailed Information
VIA FEATURES:
VIA-added extra nose light
VIA style antenna array
Dual 5-chime forward facing horns
Forward and reverse red marker lights
VIA approved artwork
Starting in 2017, VIA began to add wrapped schemes for their P42DC fleet. By 2019, -Love the Way- in both English and French was applied to a few select units with each side having a different version. In Nov. 2019, VIA applied the -Poppy- scheme, a tribute to veterans, to a small handful of units.
P40DC/P42DC SERIES LOCOMOTIVE FEATURES:
Officially licensed product of Amtrak (Amtrak-painted units)
Officially licensed product of Via Rail Canada (Via painted units)
Officially licensed product of Operation Lifesaver (Operation Lifesaver-painted unit)
4 different nose variations: Amtrak as-built with strobes, Amtrak as-built without strobes, Amtrak rebuilt, and Via
Operating marker lights front and rear on Tsunami2 equipped models
Rear marker lights installed, but not connected on DCC Ready models
Newly-tooled lit number boards
Flashing strobe light and -Big-Hole- emergency light on equipped Amtrak units (Operational on DCC only)
Flashing ditch lights on non-strobe equipped Amtrak units synced with horn blow (Operational on DCC only)
Flexible rubber MU hoses
Flexible rubber trainline hose
Separately applied wire handrails
Exhaust stack
Photo etched metal radiator fan grille
Highly-detailed underframe including air tanks with air lines, air filter, and air dryer with two different types of rock shields
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting including operating ditch lights and red marker lights
Completely-redesigned die-cast frame for superior tractive effort
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Equipped with dual 28mm round speakers
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Kit - 33-1/2 x 3 x 11 inches 83.7 x 7.5 x 27.5cm
Part of the new Cornerstone Engineered Bridge System
For more information about the Cornerstone Engineered Bridge System click here
Prototypes provide maximum clearance for vessels on busy waterways
Low-speed motor & gear drive included
Add to new or existing scenery with Single-Track Railroad Bridge Concrete Abutments (#933-4551, sold separately)
Use with Walthers Code 83 Bridge Track (948-886, sold separately)
Has clearance for todays taller equipment
Authentic trusses, chords, counterweight & other details
Bridge tenders shanty & interlocking tower
Molded in two colors and clear plastic
Walthers HO SceneMaster International(R) 4900 Single-Axle Semi Tractor Only - Assembled UPS 2 Axles
Licensed replica of popular International(R) trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled & painted
Die-cast metal and plastic parts
HO ET44 Tier 4 - DCC Equipped - CN/100th Anniversary #3108
Road number 3108 Has a black cab roof; does not have the circle graphic on the nose
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
Fox Valley Models N Bi-level Auto Rack
Union Pacific
Features:
Die-cast underframe
Finely Molded Details
Etched Metal Panels
Formed Wire
Sharp Painting & Lettering
Multiple Road Numbers
Die-Cast Underframe
Metal Wheelsets
Micro-Trains Trucks & Couplers
AK Interactive Interior Streaking Effects
Enamel Product.
With this product we can create a streaking grime effect on the light tones of the interior of all of our vehicles.
Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look
Exclusive London Transit Commission (Orange/Brown)#129 16 - Adelaide
Detail Variations:
Early-style engine door
4-window exit door
all other parts in polybag
Standee Windows
Deluxe New Look Bus models also feature:
Interior lighting
Working headlights and tail lights
Illuminated front destination sign
Painted seatback handrails
Two-tone seats (where appropriate)
A 9-12 volt DC power supply (not included) is required to power the lighting features.
HO New Look Bus Kansas City
Destination Sign:
25 Troost-Express #626
Detail Variations:
Bus-o-rama Panels
Air Conditioner
Rear EIP Exhaust Package
4-window exit door
Late-style engine door
Lichen - Dark Green (86.6 in3)
This natural product is a longtime favorite of hobbyists. Its unique texture realistically blends easily with other foliages. It is non-toxic, non-flammable, and hygroscopic.
Use for any scale to model bushes, moss and other ground cover, or use as tree foliage to model quick and economical tree masses. Lichen is available in five solid colors and three mixes. Attach to Tree Armatures with Hob-e-Tac(R). Attach to layout with Scenic Glue(TM).
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
Factory installed Celcon handrails
Individually applied wire formed grab irons
5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
See-through cab windows
DCC Ready 21-pin NEM plug
LED Illuminated front and rear headlights
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brand of track
Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMDs most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
PROTOTYPE MANUFACTURER: EMD
Axles: 4
LIGHTED: LED Lighting
Minimum Age Recommendation: 14 years
Is Assembly Required: No
HO Chemical Tankcar - Ethyl Corporation (EBAX) #6259
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Wireform safety handrails
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 15inch
HO RTR Thrall Rebuilt 40Ft Well Car - Trailer-Train (DTTX - Maroon Logo) #53233
(yellow, black; Large Maroon Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers, order now - limited quantity available
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
70-ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Red Farm Tractor (2pk)
FEATURES:
- Detail for any farm or rural scene from the 1950s to the present
- Ready-to-use loads for flatcars or trucks
- Hitch up to Plow and Planter set (949-4162, sold separately) for more realism
20Ft Corrugated Containers with Corrugated Doors, CMA CGM 2pk
052461(3) / 063081(1)
Color Powder - Red Iron Oxide (0.30 oz)
Create a wide range of realistic weathering, fading, shading and other effects on structures, rolling stock, scenery and more. PanPastel Colors are professional artists quality soft pastels made with the finest quality pigments for the most concentrated color possible! While they can be mixed and blended like paint, they go on dry (great for use on wood or paper) with no need for water or solvents, and produce very little dust. Each comes in a unique plastic pan to keep them separate and clean, plus they thread securely together making them easy to store or transport from your workbench to your layout. Use straight from the package or mix shades, and apply directly to any surface. With no drying time, colors go on true so you see results instantly! They are highly resistant to fading over time and they are easily washed off if you want to start over.
HO Greenville 86Ft Quad Plug Door Box Car - X60R Repaint 1976+ Large Logo - Conrail #295610
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Conrail (CR) -X60GR Repaint 1976+ Large Logo- is our first Greenville 86ft auto parts offering in the -early Conrail- era. These X60GR class cars represent the former Penn Central X-60-R original delivery cars that were produced in 1970. Conrail repainted some of these cars at Meadville, PA at the former EL shops, complete with a gigantic can opener between the paired set of doors. These 1970 cars have truck-mounted brake gear, End-of-Car Cushioning components and Gypsum crossover platforms along with accurate 70-Ton trucks and 33inch wheels. Our Conrail 1976 models are ready to operate with four different road numbers!
HO 60ft PS Auto Box - Southern Pacific/SP #621125
MODEL FEATURES:
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Fully detailed full cushion underframe
- Full underframe detail: air brake reservoir, control valve,
- Separately applied door closure rods, side ladders, metal grab irons and brake cylinder with plumbing and brake rod details
- etched metal end platforms
- 100-Ton roller bearing trucks with operating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Machined metal wheels
- Weighted for trouble free operation
- Multiple road numbers
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
During the 1960s, Ford Motor Company, Pullman Standard and Santa Fe pooled their resources to develop a standard boxcar to meet the transportation needs of automobile manufacturers in the United States. Delivered in 1965, the Pullman Standard auto parts boxcar is the most prolific example of this type of freight car. It ultimately changed the face of automobile manufacturing and rail transportation.
PRIMED FOR GRIME MODELS FEATURE:
- Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Some Prime for Grime models feature paint scheme variations.
Walthers Scene Master Construction Lane Markers
Keep traffic moving safely through and around any HO construction site with the SceneMaster(TM) Construction Lane Marker Kit. Typical of smaller lane and sidewalks signs used since the 1990s, the kit is designed for easy assembly, and features:
Great detail for highway and other construction scenes
Pre-finished panels with red and white stripes
3 different panel sizes - smallest can be used in N Scale
Liquid to adapt your decals to any surface. Wet the decal with the solution and a brush after place it. Leave for a few minutes, then with the help of the brush, adapt it to the surface to fully integrate it. With this product no decal will resist, no matter how complicated the surface be. And only with one product!
N Scale Curved Track - 7 inch, 45-Degree Curve (4pk)
(Need 8 Pieces for a Complete Circle)
HO Scale Turnout - Code 83 Nickel Silver Rail #6 Left-Hand
Evergreen Scale Models - Opaque White Polystyrene I-Beam .080In x 14In (4 pcs pkg)
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Early CWSX (6 pkg) #1
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
140003
140005
140008
140016
140017
140020
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Scale Thrall 53Ft Articulated Well Car Set - TTX (Blue Ex-BRAN) #888737 (3pkg)
Features:
Each car consists of three wells--A,B & C.
Walkway variants specific to prototype
Etched metal detailing
Detailed air reservoirs
Detailed brake valves
Sharp hand grabs and stirrups
Runs on 18inch radius
Recommended for 22inch radius
Floor pin holes for Atlas and other brands of containers
Product Information
When the domestic intermodal container market settled out in the late 90s, the 53Ft long container emerged the winner. Car builders responded with new wells of like size to accommodate the new standard. Introduced in series service in early 2000, Thralls triple 53Ft articulated well car was certainly the best looking of the 53Ft wells. Angular wheel cutouts, 3 flared-bottom wide and 8 narrow side posts give this intermodal age well car character.
HO AutoScenes - Tim Burr Logging
Tim shouts last-minute instructions to his driver who takes the lumbering load of logs to the sawmill!
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
VIA RAIL (EARLY) (1978 to mid 1990s)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
3 Ft Sections Cork Roadbed N Scale 5 pcs
These lightweight pieces of cork roadbed are easy to use by any modeler: materials can be easily shaped and cut. Constructed with consistent thickness, each section is beveled for a realistic look. Features excellent sound absorption.
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
GE C30-7, BNSF #5175, Green and Orange w/Paragon3 Sound/DC/DCC
FEATURES
NEW Paragon3 Sound & Operation System FEATURING ROLLING THUNDERTM with Authentic Sounds and Prototypical Operation in both DC and DCC environments
Locomotive Composition: ABS Body with Die Cast Chassis
Couplers: (2) Operating Kadee or Compatible
Compatible Tracks: Code 70, 83, 100 Rail
Minimum Operating Radius: 18 in or greater
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1820
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO AutoScenes - Backhoe
Intricately detailed vintage backhoe makes a great addition to any layout construction scene. Includes two figures.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
HO G2.0 SD60M Tri-Clops - DCC & Sound - Ex-BN CIT Group (CBFX) #6025
Primed for Grime Locomotive
CBFX FEATURES:
Ex-BN, unique patches/paint per road number
Small EMD plow, faded paint effect
Front deck mounted ditch lights
Cab door with window
After BNSF sold off some of their aging fleet of SD60Ms, a small batch were purchased by CIT group as leased power. They can be found on many different railroads as extra power.
ROAD NUMBER SPECIFIC FEATURES:
#6025
Black reporting marks on cab
small CIT logo on body
faded BN logo on nose
yellow frame stripes.
#6028 `
White reporting marks on cab
large CIT logo on body
painted out BN nose logo
yellow frame stripes.
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Warranty service available
Minimum radius: 18inch Recommended radius 22inch
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
Animated roller bearing caps
SOUND-EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Intermountain Railway Company 14-Panel Coalporter(R) Coal Gondola Mitsui Rail Capital MBKX (silver, blue)
#301008
ProtoThrottle - Blue Face Plate
The ProtoThrottle Realistic Control Stand Throttle mimics a standard EMD control stand including full detent throttle and reverser handles, a spring-loaded horn handle, a push-on/push-off bell button, and fully programmable front and rear headlights with a setting for ditch lights. In addition, the ProtoThrottle comes with a robust faceplate machined from aluminum, including prototype bezels, and anodized to give the look and feel of a real control stand.
FEATURES:
- Fully wireless throttle
- Eight detent throttle handle
- Reverser handle with centered position
- Brake handle and spring-loaded horn handle
- Push-on/push-off bell button
- Front and rear headlight knobs with dim and ditch light settings
- Auxiliary buttons that can be assigned to any DCC function
- Works with any standard DCC decoder
- Interfaces to any DCC system (with separate receiver specific to your DCC system)
- Highly configurable to suit your operating style
- Designed and built in the USA!
- Securely store your throttle with the ProtoThrottle Pocket (sold separately)
- EMD-style knob and handle upgrades available from Scottys Model Shop
Specifications:
- Approximate Dimensions: 7.6(L) x 3.2(W) x 3.0(H) inches
- Approximate Weight: 15oz
- Powered by 2x AA batteries (not included)
HO GMD SD40-2W - DCC & Sound - Canadian National (Sergeant Stripes) #5341
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. DCC with Sound version features LokSound V5 decoder.
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
Plastruct 90174 Butyrate Half Round Profile 3/8 (3 pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
GRAY
OUTSIDE DIAMETER (O.D.)
3/8
9.5mm
INSIDE DIAMETER (I.D.)
1/4
6.4mm
THICKNESS IN INCHES
1/16
THICKNESSS IN MM
1.6mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
HALF ROUND PROFILES Use for the top housing unit of corrugated roll-up doors, large scale gutters and bannister railings, and decorative trim for inside and outside buildings.
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC (6 pkg) #1
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Includes Road Numbers:
200000
200015
200020
200027
200048
200061
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - TROX #3515
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Decoder Buddy Mini
Makes Your HO Scale 21-Pin Decoder Installations Easy!
The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications. there has also been interest in HOn3 and S-Gauge applications.
- This mother board does not include the 21 Pin Decoder.
- This mother board requires soldering.
- These printed circuit board is NOT INTENDED FOR USE IN A DC SYSTEM.
The mother board includes:
- One 21 Pin Decoder receptacle
- Two pairs of track input pads
- One pair of motor input pads
- One set of stay alive pads (U+ , GND and if necessary a third control wire )
- One pair of speaker pads
This motherboard is equipped with resistors for use with LED lighting. (separate axial 2.2K) (Also available with 0 ohm, 750 ohm and custom specified resistors for function outputs. This accommodates incandescent lamps or bulbs.) It is IMPORTANT to realize that resistors must be used when LEDs are connected to the four lighting outputs of the Mini!!! The resistors may be soldered in line when purchased or the included resistors may be soldered inline upon installation. Remember there are different incandescent lamp voltages and current draw that also have to be taken into consideration.
HO 89ft Thrall Enclosed Tri-Level Auto Carrier - Chicago & North Western/ETTX Flat #802647
Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these Walthers Proto models! Introduced in the mid-1970s especially to carry automobiles, the prototypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89ft flatcars with sidesill cut-outs and 28in wheels for added clearance. In service all across North America, the racks carry the owners logos, and most ride on flatcars leased from TTX with ETTX reporting marks.
A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
-Limited edition - one time run of these numbers!
-Prototypes in service from the 1970s to the present
-Factory-installed grab irons
-Separately molded and applied side ladders
-Ultra-smooth rolling metal axles with correct 28in wheels
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24in radius is recommended for operation.
Peco Code 83 SL 8376 Streamline #7 Insulfrog Turnout - Nickel Silver Right Hand Curved HO Scale Track
Shipped from Ontario Canada
Aluminum Flat Sheet - 0.064inch x 4inch x 10inch
1 piece
Length: 10inch
Width: 4inch
Thickness:0.064inch
Stoddarts Ltd. - 3D Railroad Wall Artwork - Pennsylvania RR Logo
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- Weyerhauser #1105
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 53ft GSC Flatcar - Conrail #715691
FEATURES:
- One-time run of these car numbers, limited quantity available, order now!
- Now with die cast metal body for excellent performance empty or loaded
- Prototypes in service from 1950s to early 2000s - some in work train service today
- Used to carry all kinds of cargo including machinery, lumber, steel shapes, rail and various building materials
- Fully assembled with finely detailed body and deck
- Correct 33 inch RP-25 metal wheelsets
- Proto MA(TM) metal knuckle couplers
HO Tire Plant - Kit
Product Information
Put your HO modeling in high gear with Walthers Auto Industry series! Check out the structure kits from Cornerstone, WalthersProto Bi-Level and Tri-Level Auto Racks and SceneMaster Vehicles to bring the industry to life. Features of this kit include:
Brick curtain-style structure fits 1920s to the present
Two smoke stacks, water tank, enclosed rail car dock, truck dock
Large carbon black storage silo
Molded in two colors and clear plastic
Colorful decal signs
HO 10 Inch Track Alignment Gauges - Curved - 22 Inch Radius
RibbonRail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking, and joining rail. Track Alignment Gauges are precision machined to NMRA standards and will work on any code of HO Scale rail. Available in many curve radii as well as straight.
Roof Texture - Gray - 8.81 oz (250 g)
HO Single BiLevel Commuter Car - Undecorated Coach - Series 3 Body
Note: Unnumbered coaches do not include decals. Decals are available from Highball Graphics.
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
Enamel Paint - Panzer Grey Streaking Grime - 35mL
A very special product for doing streaking grime effects over dark grey surfaces such as German vehicles painted with Panzer Grey. Also suitable for other effects such as add chromatic richness to any piece or surface. This enamel should be mixed well and then painted in vertical lines on the sides of the model. After, you just blend with a clean brush moist with Enamel Thinner to produce some great realistic streaking grime effects.
N Scale 40ft Boxcars - CN Buffalo (4pk), with Jewel Cases
Road #429004, 429049, 429053, 429245
Built in the mid-1950s to carry newsprint, these 40ft boxcars with Bettendorf trucks were converted to carry grain in the late 1980s, in a project financed by the Government of Canada. They were known as Buffalo Boxcars. Canadian National is one of the largest railroads headquartered in Canada, with over 20,000 miles of track and service from Canada into the United States.
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
HO Canadian National - Steam Locomotives (1931-1960) - Waterslide Decals
HO SD70M - DCC & Sound - EMDX/Maroon/Black #7018
Detailed Information
EMDX FEATURES:
Solid maroon/black scheme
Large EMD front plow
Round EMD style front ditch lights
Can-style roof antenna
Early EMD trucks with hidden bearings
During 1995, EMD built 22 SD70Ms for their lease fleet, including 3 official demonstrators built in 1992. Painted in 2 schemes (solid EMD maroon and black, and maroon, grey and silver), EMD was able to provide many different railroads to test and compare their new 710 prime mover to other current models. These could be seen all over the US and added a splash of color when mixed in locomotive consists. By the early 2000s, they were sold to CSX and eventually painted into CSX colors.
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Scale GP38 - DCC & Sound - Southern (High Nose) #2797
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO 7/32 inch Open Web Truss - Cellform Style (2pcs)
Use for roof trusses, space frames and other modern and/or futuristic steel structures. Precision Injection Molded in Styrene Plastic. Manufactured with a special tongue and groove connection feature to quickly and accurately attain the desired length.
SCALE
ALL
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
7/32
HEIGHT IN MM
5.6mm
WIDTH IN INCHES
1/4
WIDTH IN MM
6.4mm
THICKNESS IN INCHES
3/32
THICKNESSS IN MM
2.4mm
LENGTH IN INCHES
4-1/16
LENGTH IN MM
100mm
1/4 inch OD Round Stainless Steel Rod - 22 Gauge x 12inch Long
Round Stainless Steel Rod - Not hollow (1 pc)
Outside Diameter: 1/4 inch
HO RTR ACF 4650 3-Bay Hopper - Golden West #CRLE 524501
Built: BLT 6-90
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
Saber Saw Set
.022inch thick blade, 4-1/2inch long, 3/8inch wide. Ideal for large inside cuts and for cutting through thick material. Set also includes #36408 -push- & the #36406 -pull- miniture keyhole saber blades.
HO Telegraph Poles & Cross Arms - Kit
Transform your steam-, diesel- or modern-era right-of-way with the SceneMaster Telegraph Poles and Crossarms kit in HO. Typical of the line poles that carried signal, phone and telegraph wires for railroads and private firms, they can still be seen trackside today. The kit features plastic parts molded in a gray-brown wood color, and includes 10 poles with two molded crossarms, plus 20 add-on crossarms for easy customizing.
HO 53ft Stoughton Container - HUB/BNSF (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stack-able
- Separately applied door closure rods
- Each container individually numbered
- Razor sharp printing and painting
PROTOTYPE INFORMATION:
An intermodal container (also known as a container, freight container, ISO container, shipping container, hi-cube container, box, sea container, container van) is a standardized reusable steel box. Intermodal containers are used to store and move materials and products efficiently and securely in the global containerized intermodal freight transport system. Intermodal indicates that the container can be used across various modes of transport, (from ship to rail to truck) without unloading and reloading its contents. Lengths of containers, which each have a unique ISO 6346 reporting mark, vary from 8 to 56 feet (2.438 to 17.069 m) and heights from 8 feet (2.438 m) to 9 feet 6 inches (2.896 m). There are about 17 million intermodal containers in the world of varying types to suit different cargoes!
HO Two-Story Farm House - Kit
Perfect for the city or country family, this two-story home is loaded with details. Theres a peel and stick -tin- roof, along with a small lean-to for the back that can be used as a mud room, summer kitchen or bathroom. The front porch features delicate, laser-cut trim. A pair of cast metal chimneys round out the kit.
Finished model measures:
4-3/4inch Long,
3-1/2inch wide
and 4-1/4inch tall
(11.8 x 8.7 x 10.6 cm).
Red
From traffic accidents to chemical spills, the Hazardous Materials Unit provides a critical role in the modern Fire Department, carrying equipment and personnel ready to handle some of the most challenging and dangerous situations.
This heavy-duty rig is perfect for assignment to a firehouse in the industrial district of any HO scale city, and looks great parked with your collection too!
Each SceneMaster vehicle is a highly detailed replica, using diecast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
Fine Turf - Earth - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15209
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO EMD SW9 - DC/ Silent - Canadian National (CN Black Scheme) #7000
Photo says: Model will include various detail parts to modernize appearance
Preliminary artwork and drawings. Subject to changes or revisions before production
Canadian National:
Delivered in 1952 / GMDD
CN style spark arrestors (in polybag)
Large barrel style headlight
Frame mounted side handrails
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO 40Ft PS-1 Boxcar - Lake Superior & Ishpeming #2403
Date: BLT 8-58
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
Styrene Sidewalk Sheet - 3/8in x 3/8in Opaque White Polystyrene Sidewalk (1 Sheet)
.021in (.53mm) GROOVE SPACING.
.040in THICK.
6in x 12in SHEET
60ft Pullman-Standard Flatcar - Ready to Run -- TTX VTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO ACF 2970 Covered Hopper - BNSF (3pk)
MODEL FEATURES:
-Round or trough hatches
-Photo-etched metal roof walk
-Separately applied wire grab irons and stirrup steps
-Separate brake cylinder, valve and air reservoir with wire brake plumbing
-Detailed outlets
-Multiple road numbers
-Fully-assembled and ready-to-run out of the box
-Accurately painted and printed
-Highly detailed, injection molded body
-Separately applied brake wheel
-Machined metal wheels
-Screw mounted trucks
-Body mounted McHenry operating scale knuckle couplers
-Weighted for trouble free operation
-Wheels with RP25 contours operate on all popular brands of track
-Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
-Minimum radius: 18in
PROTOTYPE INFORMATION:
The 2-bay covered hopper first entered service in the 1950s. The cars handle loads such as cement, sand and similar denser bulk commodities. In the 1960s, American Car and Foundry introduced the Centerflow design. The Centerflow relies on the cars rounded body to provide structural strength without the added weight of bracing, as well as making gravity unloading easier. This 2-bay car came in a 2,970-cubic foot capacity.
N Scale Low Speed Limit Signs (18pk)
HO AutoScenes - Rustys Regret
This abandoned car suffers from years of neglect...needs an owner!
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
PSC Transfer Van - Canadian National #76557
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
HO RTR 53Ft Platewall RoadRailer Trailer - Conrail/ Norfolk Southern (Triple Crown) #463145
(white, Medium Logo, NS-CR Logos)
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
HO GE 44 Tonner Phase IV - DC/DCC/Sound - Pennsylvania #9333
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.125 (10pcs pkg)
HO Kartrak ACI Labels - Decals
Decal set with 96 different ACI labels useful from late 1960s to present on cars and locomotives. Unlike other ACI labels on the market, these use gray (not pure white) for the lightest colored bars to more closely match the prototype. Note that these have been printed using a screen + offset technique to provide a higher quality decal.
Metal Burnishing Fluid - 100mL
A new faster formula (works in seconds), and at a more competitive price. This has extensively tested and formulated, and improved this product, at AK-Interactive. With their Metal Burnishing fluid, you can naturally weather and rust white metal tracks. Just dip the tracks in the liquid for a few seconds and the metal will begin to appear dark and rusty very quickly, easily and effortlessly. You can vary the effect using different dilutions and varying lengths of soak. Using less product, you can achieve even better results than with their previous formula.
HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Canadian Pacifc (CP) Modern Boxcars - 1970+ - Waterslide Decals
Description: This set will cover a variety of Canadian Pacific modern boxcars with and without the CP Beaver Herald. CP began purchasing and rebuilding boxcars of both Plate Band Plate C clearances. CP would then rebuild the cars often raising the roofs of the Plate B cars to a Plate C. Many former Rail Box and other 1970s per diem cars were acquired by CP for this rebuild program and can still be found in service today. USE WITH: MC-4389 (Reflector Stripes), MC-5003 (Late COTS Panel)
HO Scale SD30C-ECO - DCC & Sound - Canadian Pacific #5009
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
HO H-6-G - DCC & Sound - Canadian National Railway (Straight Wafer) #1541
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) #485424
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #00044
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale High Speed Limit Signs (18pk)
F30A 50Ft Flat Car: Penn Central #702058
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
HO GMD SD40-2 - DCC Ready - CP Rail: As Delivered #5674
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO International 4900 Crew Cab Fire Truck - Red
Keep your HO cities safe with a fleet of SceneMaster vehicles on the job! Typical of equipment serving communities big or small, features include:
- Licensed replica of popular International trucks
- Must-have for HO model railroads
- Perfect size for collectors
- Positionable parts on many models
- Fully assembled and painted
- Die-cast metal and plastic parts
This medium-duty truck line was introduced in the late 1980s. Powered by a Navistar DT inline six-cylinder diesel engine capable of up to 350 horsepower, the 4900 series has been a great starting point for a wide range of commercial vehicles, including delivery vans, single- and dual-axle semi tractors, as well as fire apparatus and other government applications.
INTERNATIONAL(R) and other International Truck trademarks are licensed by International Truck Intellectual Property Company, LLC.
Yellow
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Positionable Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
HO GE Dash 9-44CW - DCC & Sound - Burlington Northern Santa Fe (BNSF Heritage I) #999
BNSF FEATURES:
High-mounted number boards
K3 horn
Front ditch lights
ATSF -Gullwing- cab
Standard brass bell
Part of the first new BNSF locomotive order to be painted in the then new official corporate colors, these -Heritage- GE units became affectionately known by railfans as -Pumpkins- based upon the Great Northern colors used on some early diesels. Some are still running today in this scheme.
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
Athearn Roundhouse HO 50ft ACF Boxcar AD&N #8102
Detailed Information
MODEL FEATURES:
70-ton Roller Bearing trucks with 33in wheels
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Body mounted McHenry operating scale knuckle couplers
Wheels with RP25 contours operate on Code 70, 75, 83, 100 rail
Minimum radius: 18in
Specifications
COUPLER STYLE: McHenry Scale Knuckle
2mm Static Grass - Autumn Grass (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16051
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Master Series - GE B23-7 - DCC/Sound - Finger Lakes Railway #2310
FEATURES:
The Atlas B23-7 locomotive model includes such optional/road name specific details as:
- Pilots with and without anti-climber
- Cab headlights or low-nose headlights
- Cab with 4 or 2 side windows
- Phase 1 or 2 sill/chassis used where appropriate
- Bell mounted under the sill or on the long hood
- FB-2, AAR type B, or Blomberg truck side-frames used where appropriate per road name
ADDITIONAL FEATURES:
- Separately-applied scale detail parts include: windshield wipers, metal grab irons, coupler cut levers,
multiple-unit hoses, snow plow, train line hoses, fine scale handrails, and more!
- See through step detail on sill
- Etched metal radiator grilles
- Painted crew members
- Factory-equipped with AccuMate knuckle couplers
- Coupler pocket designed to accept AccuMate Proto-couplers
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Directional lighting
HO 60ft Hi-Cube Plate F Boxcar - TFM #20091
Transportacion Ferroviaria de Mexico (Boxcar Red, TFM Logo)
Bring your freight car fleet up to date in minutes with the Walthers Mainline(R) 60ft Hi-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft Hi-Cube Plate F Boxcar include:
-Limited edition - one time run of these roadnumbers
-Prototypes now in service with TTX and several railroads
-Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
-Prototypically correct roof with both X and diagonal panels
-Separately applied latch bars
-Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
-100-ton roller bearing trucks
-36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO PA-2 + PB-2 Demonstrator Set - DCC Ready - Alco-General Electric #8375
The 2nd Run ALCO PA and PB Features:
Photo courtesy of NHRTHA
Correct nose and roof profiles 3D-scanned from the prototype
Loads of roadname-specific details
ATSF re-powered units feature unique roof blister and EMD style
fans
A units and A-B sets available
Dynamic or non-dynamic brake versions, where appropriate
Full underbody piping and conduit
Separate grab irons and handrails installed at the factory
Etched-metal grilles, where appropriate
Lit number boards
Full cab interior
Operating Gyralite or red Mars light, where appropriate
Rapidos proven drive system
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options
ESU LokSound V5 Decoder
Peco PL10 Switch Machine
Easy-to Install Motor for Peco Turnouts
Unit installs directly beneath the turnout and makes positive contact without linkage or other complex connections. Just cut a hole in your bench work deep enough to clear the motor and install.
The pin is 3cm long.
Simple, reliable and good value. Requires a rectangular hole 40mm x 24mm when clipped directly to the underside of a Peco Turnout. Use the PL-12/12X if above baseboard mounting is required; attaching PL-13 and 15 Switches will enable switching for automatic polarity etc.
Recommended to be used with:
PL-26 Passing Contact Switches
PL-34 Turnout Motor Wiring Harnesses
PL-27 Switch Console Units
N Scale Glacier Gravel Co. - Kit
The finished model measures:
5-5/8 x 6-5/8 x 6-1/8 inches (14.3 x 16.8 x 15.6cm)
Add aggregate traffic to your layout with this rugged trackside structure. The Walthers Cornerstone Glacier Gravel Co. is a model of a stone crusher-washer with equipment for loading rail cars or trucks. Railroads have an enormous appetite for crushed rock. A mile of mainline can gobble up thousands of tons. Glacier Gravel Co. will help satisfy your railroads appetite for rock. This easy-to-build kit looks great as part of a stone quarry operation, in a mine, or as part of a slag recovery operation down the track from the steel mill buildings. Detailed parts capture the look of concrete and steel construction. The kit features corrugated construction on a heavy poured concrete foundation/loading tunnel. Conveyors to a truck dump and feeder from the quarry complete the facility. Rock crushers similar to this have been in use since the 1940s, so Glacier Gravel Co. will fit perfectly into transition and modern era layouts. The main building can accommodate two tracks inside and includes a detailed loading bin. Glacier Gravel Co. also includes decal signs and complete instructions.
- Easy-to-build plastic kit
- Use as a stand-alone rock crusher and loader or as part of a larger quarry or mine
- Fits 1940s and later modeling eras
- Two loading tracks
- Molded in appropriate colors
- Decal signs included
Plastruct 90472 HO ABS Hand Rail (2pcs pkg)
SCALE
HO
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
7/16
HEIGHT IN MM
11.1mm
WIDTH IN INCHES
3/4
WIDTH IN MM
19.1mm
LENGTH IN INCHES
6
LENGTH IN MM
150mm
USE DESCRIPTION
ABS HAND RAILS Use for hand rails on platforms, walkways, balconies and any other elevated structures with public access. Precision Injection Molded in Gray ABS. Ideal for all outdoor or professional
HO 60ft Hi-Cube Plate F Boxcar - Union Pacific #961579
Bring your freight car fleet up to date in minutes with the Walthers Mainline(R) 60ft Hi-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft Hi-Cube Plate F Boxcar include:
-Limited edition - one time run of these roadnumbers
-Prototypes now in service with TTX and several railroads
-Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
-Prototypically correct roof with both X and diagonal panels
-Separately applied latch bars
-Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
-100-ton roller bearing trucks
-36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
Built-&-Ready Landmark Structures - Grannys House
Assembled - 3-3/4 x 5-7/16 inches (9.5 x 13.8cm)
A quiet little home with a rose arbor and Grannys living room rug airing out on the porch. The grandkids are visiting, as evidenced by the scooters leaning on the side of the house and the toys on the porch.
Gunderson Multi-Max Auto Rack - CP SOO
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
Atlas Brush Company 55 3pc 10/0 #0 #1 Taklon Brush Set
Coarse Turf - Yellow Grass - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
HO Pre-Blackened Brass Chain - 12 Inches - 27 Links Per Inch
A-Line Chain is great for detailing all kinds of models in all scales. Available in a variety of sizes measured as links per inch, chain is also available in multiple kinds of metals.
HO Alco FA-1 - DCC & Sound - Canadian Pacific (Block Scheme) #4010
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
Enamel type filter for modelling
Filters are designed to achieve a subtle tonal variation for especially vehicles in monotone camouflage colors. Shake and apply directly from the bottle with a moist flat brush.
This grey filter allows us to change subtly the base tone of white winter surfaces such as tanks, spaceships, light colored aircraft, or vehicles of the United Nations. Making it more accurate and authentic color. At the same time, the filter adds depth and richness to our vehicle or accessory, preparing it for the next paint steps. Use the filters by moistening a brush and applying it without flooding the surface, to enrich hues in your models, unify camouflage, or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution, or searching for the correct colors for our vehicle. These filters are enamel based and can be cleaned or diluted with Odorless Enamel Thinner.
F30A 50Ft Flat Car: Conrail MOW #59606
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
HO SD40T-2 - DCC & Sound - Southern Pacific (Speed Letter) #8237
ETA: May 2023
Detailed Information
SP -SPEED LETTERING- FEATURES:
88inch nose with brake wheel
Cab mounted A/C
Relocated P3 horn
Front ditch lights
Removed front and rear SP light package
Modified front L window
Extended range dynamic brakes
In an attempt to revise their image, SP began to use a new -Speed Lettering- scheme adapted in 1991. Also, during this time, they started to remove parts of their well-known light packages. If a light component failed, it would have to be fixed, thus taking the locomotive out of service. To reduce maintenance costs, SP started to actively remove these extra lights leaving empty brackets and plates where they were once installed. Other changes included the addition of front ditch lights and the horn being relocated to the rear hood.
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Photo-etched windshield wipers
Separately applied air tanks
LED Lighting
HTC truck sideframes
Welded ECAFB
All-wheel electrical pickup
See-through dynamic brake fans
Separately applied wire grab irons
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox specific for the tunnel motor
Speed recorder attached to appropriate axle per prototype
McHenry operating scale knuckle couplers
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Fully assembled and ready-to-run
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
1951 Studebaker Starlight Coupe Resin Cast Kit
N Scale EMD SD70ACe - Paragon4 Sound/DC/DCC - UP (Missouri Pacific Heritage Livery) #1982
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up (except for rubber traction tire)
- ABS Plastic Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, and Cut Levers
- Prototypical Light Operation with Separately Controllable Headlight, Rear Light, Cab Light, and Front Ditch Lights
- Prototypically Accurate Sounds for an EMD SD70ACe Locomotive
- Microtrains-compatible Couplers (2)
- Will Operate on Code 55, Code 70, and Code 80 Rail
- Minimum Operating Radius: 9.75 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
HO 89ft Thrall Enclosed Tri-Level Auto Carrier - TTX/ETTX Flat #331154/710851
Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these Walthers Proto models! Introduced in the mid-1970s especially to carry automobiles, the prototypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89ft flatcars with sidesill cut-outs and 28in wheels for added clearance. In service all across North America, the racks carry the owners logos, and most ride on flatcars leased from TTX with ETTX reporting marks.
A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
-Limited edition - one time run of these numbers!
-Prototypes in service from the 1970s to the present
-Factory-installed grab irons
-Separately molded and applied side ladders
-Ultra-smooth rolling metal axles with correct 28in wheels
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24in radius is recommended for operation.
HO Single Comet Commuter Coach - Montreal AMT (Late Lake Scheme) #727
The Rapido Trains HO scale Comet Cars features:
Designed from field measurements as well as original blueprints and documents.
Full interior detail including individual seats, and unparalleled underbody detail incl. all pipes and boxes
Extremely free-rolling inside-bearing trucks with metal wheelsets
Tinted windows and accurate painting and lettering
All-wheel electrical pickup and advanced circuitry for flicker-free lighting on both DC and DCC layouts
Coaches feature controllable interior and end marker lights using the included magnetic wand
Cab Coach lighting controlled using the magnetic wand on both DC and DCC layouts
HO 60ft Flat Car - OTTX/Red Logo #92020
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
Code 83 Warren Truss Bridge - HO Scale
HO GE C30-7 - DCC Ready - Norfolk Southern #8049
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
72Ft Centerbeam Flatcar with Standard Beam - Ready to Run - Southern #601120
Product Information
Shipping lumber by train is easy for your HO railroad with a fleet of WaltherMainline 72Ft Centerbeam Flatcars on the job! Designed to speed loading and unloading, these bigger cars entered service in the 1980s and quickly became a favorite with shippers and customers. These nicely detailed models are based on earlier cars built with oval cut-outs (popularly known as -opera windows-) on the centerbeam to reduce overall weight, which are still in service with a wide range of railroads and lumber producers. Other features include:
Limited edition - one time run of these roadnumbers!
Heavy die-cast metal underframe for excellent tracking
Correct 36In turned metal wheelsets
Proto MA metal knuckle couplers
HO Gunderson Multi-Max Auto Rack - Canadian Pacific (Beaver) #697974
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
2mm Static Grass - Summer Flowers Grass (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
HO Alco FA-1 - DCC & Sound - Canadian National #9402
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO 53ft Jindo Container - Ferromex Set #2 (3pk)
(#232603, 232618, 232624) (GRAY/RED)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting
HO 17,360 Gallon Chlorine Tank Car HOKX
FEATURES:
-Brake rigging molded separately
- Scale handrails
- Metal safety bars, tank fittings and safety placards
- AccuMate couplers
- Screw-attached 100-ton roller-bearing trucks for added reliability
- Accurate painting and lettering
- Brake wheel chain
Mold-A-Scene Plaster-1/2 Gallon - Dry
Mold-A-Scene is a plaster material that can be shaped like modeling clay, but sets like plaster, without a mold. Its longer setting time allows a modeler to add terrain contours to new or existing scenery. It is excellent for dioramas, layouts and models, as well as volcanoes and other school projects. Dries overnight.
HO 26Ft Can-Car Dry-Van Trailer - Canada Cartage #8H0375
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Gulf Oil (Repaint) #5024
Built: 11-35
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
1956/72 IHC-190 Tandem Tractor - Unpainted and Resin Cast Kit
HO EMD GP7 - DC/DCC Ready - Amtrak (Orange) #777
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
AMTK FEATURES:
NEW! Non-Dynamic with roof access hatches
1700-gallon fuel tank
Partial skirting above fuel tank
Front and rear flashing emergency beacon (in DCC mode only)
Flashing xenon strobes (in DCC mode only)
Wheel bearings per prototype
In the late 1970s Amtrak acquired a fleet of second-hand GP7s which were painted in a bright orange color for use in maintenance-of-way service (MOW). These highly visible units were quickly and unofficially named -Pumpkins- by the railfan community. They were frequently spotted hauling Amtrak ballast cars, flat cars equipped with special racks to carry rail, or gondolas that were used to gather scrap steel and wooden ties that accumulated on the right-of-way. Aside from MOW use, these units were used to couple Amtrak express Roadrailers to soon-to- arrive passenger trains. Pumpkins could also be found in service on non-Amtrak rails. For example, Amtrak -Pumpkins- were involved in the rebuilding of the Doylestown branch for the Southeastern Pennsylvania Transit Authority (SEPTA), and the Atlantic City line for New Jersey Transit. This bright paint scheme with unique details such as cab mounted strobes and end mounted emergency beacons will surely be an -attention grabber- on your layout.
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Plastruct 90021 ABS I Beam 1/16 x 10in
HO 1976 Chevy Stepside Pickup - Tangier Orange
This pickup is perfect for North American street and highway scenes. This detailed truck features a die cast metal body, interior seats, window glazing and authentic decoration. Perfect for rural scenes or carting loads around town, this truck is a great addition to any 1970s and later layout scene.
GLa 2-Bay Hopper: PRR Shadow Keystone - 6(pkg)
Features:
All-new tooling
Scaled from original blueprints
Die cast frame and floor for optimum weight
Full interior rivet and bracing details
Factory installed wire grab irons
K- or AB-brake gear installed as appropriate
Factory installed Kadee #158 couplers in narrow draft gear box
Turned metal wheels in correct PRR 12D-F8 trucks
Accurate paint and lettering
Multiple road numbers available for each paint scheme and railroad
Detail Variations:
As operated from 1954 to 1961
6-pack includes the following numbers, all individually packaged:
#153843
#154123
#155472
#701626
#702186
#705934
Blair Avenue Kit Part One 4 x 6inch
Turn the -wrong side of the tracks- into everyone s favorite part of town with this set of neat commercial structures. Based on actual buildings, the kit includes both the Photo Studio and Chinese Restaurant, with detailed castings that capture the look of the prototype s old stone and brick construction
For more detail on how to start and finish model go to downtowndeco .com TUTORIALS WITH RANDY HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
HO 70 Ton 9 Panel Open Hopper - Alaska #14734
FEATURES:
True scale dimensions with accurate details
Weighted, detailed underframes
Equipped with AccuMate Knuckle Couplers
Trucks equipped with free-rolling metal wheels
Accurate painting and lettering
Removable coal load
1:87 1980 Flxible 53102 Transit Bus with Bus-O-Rama Boards, MTA New York
Esso Service Station (1946-1965)-Gas Stations - Waterslide Decal
RTR 60Ft Gundreson Box Car - AOK #112077
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO B-50-15 Boxcar - As Built w/ Murphy Roof - Southern Pacific (1946 to 1952 scheme) #15102
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
HO RTR 68Ft Bulkhead Flatcar - Western Pacific(TM) #1466
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
HO 60Ft Bulkhead Flat - Southern Pacific SP (3pkg)
Road numbers: #509349, 509381, 509440
MODEL FEATURES:
Separately applied end details and brake wheel
33inch machined metal wheels with RP25 contours
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO Grain Dryer - Kit
Product Information
The Walthers Cornerstone HO Scale Grain Dryer is based on structures found at elevators, feed mills and on farms across the continent. Featuring realistic sheet metal construction complete with panel lines, the Grain Dryer can be used with all kinds of metal grain handling bins and silos. Typically, grain dryers are connected to other structures with the Grain Conveyor (933-3124, sold separately). All Grain Dryer parts are molded in an appropriate base color and complete instructions are provided.
Use with other Walthers Cornerstone grain handling structures
Realistic sheet metal construction
Easy to build plastic kit
Molded in appropriate color
HO 89Ft Bethlehem Flush-Deck Flatcar - TTX WTTX #157939
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers
HO Scale NSC 73Ft Centerbeam Flatcar - CP Rail #318145
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
PS-2 2003 2-Bay Covered Hopper - Denver & Rio Grande Western #18334
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
HO SD38 - DCC Ready - CanDo Rail Services #5202
CCGX FEATURES:
CanDo Rail Services is a contracting company based out of Brandon, Manitoba, Canada. They preform track maintenance for large industries, operates as a shortline, and contracts switching services in Ontario, Manitoba, and Alberta Canada.
ROAD NUMBER SPECIFIC FEATURES:
#5201
- Ex: DMIR. Short fuel tank
- triple clasp brakes
- M3 horn
- UP style plows
- all-weather windows
- ditch lights on both ends
- Classified as a SD38AC
#5202
- Ex-BLE. Medium fuel tank
- high-mount truck brakes
- M3 horn
- UP style plows
- all-weather window
- ditch lights on both ends
- Classified as a SD38AC
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO GE C30-7 - DCC & Sound - Norfolk & Western (Black Scheme) #8068
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
HO NSC 5304 Boxcar - Canadian National (Delivery w/ Green Door) #557353
The Rapido NSC 5304 cu.ft. CN Combo Door Boxcar features:
Separate grab irons installed at the factory
100-ton Barber S-2 trucks, with metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe
HO 50Ft FMC 5077 Double Door Box - Southern Pacific SP #246045
MODEL FEATURES:
Separately applied grab irons, end ladders and brake wheel
Photo-etched cross-over platform
33inch machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
N Scale RTL Turboliner Coach - Amtrak (Phase III Late) #187
The Rapido N Scale Rohr Turboliner features:
Accurately designed using original blueprints and field measurements
Tinted windows, interior details and flicker-free interior lighting
Separate factory installed grab irons
Highly-detailed trucks including third-rail shoes
Working headlights, marker lights and cab-mounted strobe lights
Both Power Cars come with smooth, reliable drive systems for optimal performance
All wheel electrical pickup. Yes, we mean every ... single ... wheel!
Rapido Trains Inc. is pleased to bring speed to the rails with the Amtrak Rohr Turboliner in N Scale!
In the early days of Amtrak, efforts were made to improve passenger services along key corridors. Following the success of the French-built RTG Turboliners in the mid-1970s in the Midwest, Amtrak turned to Rohr Industries in California to build modernized Turboliners for use along the Empire Corridor.
Entering service starting in September 1976, these new RTL Turboliners quickly proved their value, bringing passengers back to the rails. Equipped with third-rail shoes, they operated on electric power through New Yorks Grand Central Terminal (and later Penn Station), switching to gas-turbine power once out of New York City. Painted in Amtraks stunning red, white and blue Phase III paint scheme, they operated on most Empire Corridor services, as well as regular appearances on the Adirondack to and from Montreal in the early years. Occasional equipment needs even put the Turbos on other rare adventures outside their normal call of duty, including the Niagara Rainbow to Detroit via Southwestern Ontario, and the Maple Leaf to Toronto via Niagara Falls.
After nearly 20 years of service under their belts, Amtrak selected one RTL set in 1994 to be rebuilt into what would be called the RTL-II, incorporating several improvements including new turbines, a remodelled interior, a striking new demonstrator paint scheme, in addition to extending the lifespan of the set for several more years. While this set continued in service until 2003, no other RTL-II sets were ever commissioned.
Further redevelopments and improvements of the fleet into the RTL-IIIs was never fully realized, and all were retired from active service in 2004. Conventional equipment has since been utilized on the Empire Corridor services in place of the once mighty Turboliners.
1/16 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (3 pcs)
Outside Diameter: 1/16 inch
Concave Carving Blades (5pk)
Medium & Heavy Duty Replacement Blades (Fit K2, K5 & K6 Handles)
HO Greenville 86ft Double Plug Door Box Car - Penn Central #295164
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Release Date: August 2021
Penn Central (PC) -Original 1968- is our second foray into the world of Penn Central 86ft Boxcars. Previously, our PC offering was a repaint of a former PRR car. This time? We are living to the words of our last press release, where we promised delivery PC cars in the future. That future is now: the Greenville-painted original PC cars, classed as X-60M, are here. Built in October 1968, these cars have the large PC graphics on the side of the car. The -When Empty Return to- stenciling is to Chicago Heights IL, again representing the service to/from the Ford Chicago Stamping Plant. PC-distinctive details stand out on this replica, including a gorgeous Peacock 850 hand brake and Morton crossover platforms. 100-Ton Trucks with 36inch wheels and rotating Timken roller bearing caps finish off this PC offering. These stunning models are now available in eight road numbers – do not miss them! Can you ever have too many 86ft PC Greenville box cars? We don’t think so…
Thru Girder Bridge 100 Ft Double Track
Injection molded, pre-colored, high impact styrene kit.
Multiple kits can be combined to build a custom bridge of any length.
Superb detail includes lateral bracing, crossbeams, stringers, and rivet plates, all with extensive rivet detail. Bridge can be modeled with square or rounded girder ends.
Parts included allow bridge to be built with an open or ballasted deck.
HO Code 83 Bridge Flex-Trak is included.
Bridge is a scale 100 Ft long by 28 Ft high to the rail tops. The double track bridge has 17 Ft track centers.
HO Procor 3000CuFt Aluminum Hopper w/Handrails - UNPX/ Procor Wordmark #127232
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
SubTerrain System - Foam Risers (3/4in)
4/pkg - 3/4 x 2-1/2 x 24 inches (1.9 cm x 6.35 cm x 60.9 cm)
Risers are generally used with incline/decline starters to create varying grades on your layout. Risers are easily flexed to form curves and work on plywood or foam bases. To install, pin in place with foam nails and attach with foam tack glue or low temp foam glue gun and glue sticks.
HO Bathtub Coal Gondola - MLMX/ Sims Metal #322
Built: 10-08
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO 89ft Thrall Bi-Level Auto Carrier - Burlington Northern/TTGX #159561
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Built-&-Ready Landmark Structure - Home Sweet Home
Assembled - 4-1/4 x 7-1/8 inches (10.8 x 18.1cm)
Classic Victorian architecture housed under a characteristic Mansard roof, a vintage weather vane and intricately styled dormers complete with flowered window boxes. Ma and Pa sit quietly on the front porch watching the world go by while old dog thinks about chasing Kitty around the yard. Other details include bracketed eaves, back porch with propped-open screen door, storm cellar, woodpile, propane tank and more.
HO Brick Post Office - Kit
Perfect for new suburbs or small towns, the Cornerstone Brick Post Office delivers big detail to a small area! Typical of satellite facilties in use from the 1950s to the present, this HO model features:
-Detailed brick walls, separate windows, nonworking security lights, plus gas and electric meters
-Trash cans, curbside mailboxes, 2 styles of bike racks, fire hydrant, phone booth and parking meters all included for extra realism
-Colorful decal signs
-Molded in 4 colors
7-7/8 x5-11/16x3-1/16in
20x14.4x7.7cm
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX 15000 Series 6 Pack
15306,15354,15392,15429,15433,15452
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 68Ft Railgon Gondola - Southern Pacific #365035
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO EMD SW9 - DC/ Silent - Union Pacific (UP As Delivered Slogan) #1846
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Union Pacific:
Features the as-delivered slogans -DEPENDABLE TRANSPORTATION- on the right hand side of the cab, and -SERVES ALL THE WEST- on the left hand side of the cab.
Delivered in 1953
Optional -beehive- style spark arrestors with short stacks in polybag
Carbody style handrails
Extra tall -safety end rails- on the cab end
Reflectolite flashing warning light
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Chinese Red) #5307
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
HO Plastic Couplers w/Gearboxes - Medium (9/32 inch) Overset Shank (2pair)
This industry leading coupler features plastic standard coupler with metal knuckle, and #634 standard centering spring and comes complete with insulated draft gearbox and lid. The #22 Magne-Matic Plastic Coupler may be mounted with the included #213 or #232 Gearbox or with most other manufacturers cast-on coupler pockets.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.
Package Includes:
- (2) Pair #22 Plastic Shank Couplers - Medium Overset Shank
- (2) Pair #634 Centering Spring NO.5 Style
- (2) Pair #213 .055 inch ID & .100 inch ID Bushing/Sleeves
- (2) Pair #212 Talgo Truck Adaptors
- (2) Pair #213 Gearboxes
- (2) Pair #232 Gearboxes
- (2) #622 Knuckle Springs
HO U33B - DCC/Sound - Guilford (Boston & Maine) #190
FEATURES:
- Flush-mounted radiator screens and air intake screens on the long hood - early phase
- Built-out area on the top of the front and rear pilots - early phase
- Corrugated radiator and air intake screens, with a flat pilot face - late phase
- Optional separate electrical equipment box will be included on the left side walkway behind the cab per the prototype
- AAR-B or Blomberg trucks will be used when appropriate
- Separately-applied detail parts including: windshield wipers, metal grab irons, coupler cut levers, fine scale handrails & more!
- Five pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Directional lighting with Golden-white LEDs
- Blackened metal wheels
ATLAS MASTER GOLD (DCC/SOUND):
- ESU LokSound decoder, supporting all DCC programming modes
- Flexible mapping of function keys F0 to F31
- Follows all NMRA DCC standards and recommended practices
- Lighting effects to match the prototype, including Gyralight and Mars light where appropriate
- Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
HO PC&F 5241 CUFT - Boxcar - Saratoga & North Creek (SNC) - 6 Pack
3209, 3258, 3274, 3285, 3370, 3391
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO EMD GP40R - DCC Ready - Canadian National (Ex-IC) #3123
2012+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO 40ft Corrugated LC Container - Hanjin #2 (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered
HO 1988 G43B Coil Svc. Gondola w/ Coil Racks (Coils Not Included) - Conrail (CR) #601816
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -1988 G43B Coil Svc.- With Coil Racks ? Coils Not Included in the now-classic Conrail red paint. This series represents the former PC-painted G43B series. Conrail maintained the lettering locations that PC did, painting the Conrail reporting marks, road number, and Conrail can opener logo in the same locations PC had stenciled them. The G43B prototype features cushion draft gear, giving the model a distinctive look compared to the other G43 classes. The top chord of the car has a -COIL STEEL LOADING ONLY- stencil to remind customers and railroad officers that the car is equipped with coil racks. Our model has coil racks too, and we sell beautifully executed steel coils for this car separately. We recommend a load of four coils if you want to replicate most prototype loading patterns ? for the size of coil we created. Yes, we did the math. These Conrail coil service gondolas are offered in 12 road numbers and feature details appropriate for these 1969-built cars.
HO IC Centralia Steel Wide-vision Caboose - Illinois Central (IC Gray Repaint 1988+) #199402
Product: IC Centralia Steel Wide-vision Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber or Gould Caboose Roller Bearing with separate brake beam part as appropriate for each paint scheme
Wheels: CNC-Machined 33inch Wheels
DC/DCC Lighting Features: interior lighting as well as lighted flashing FRA red lights
Illinois Central (IC) -Gray Repaint 1988+- shows off the -New- IC corporate image of the time period, which was later referred to as -Death Star.- The ICG removed the -G- in early 1988, and the new slimmed-down railroad adopted an all-new logo and color scheme palette. Centralia painted cabooses in a classy gray with white lettering, including the -New Image- IC logo. The prototype numbers selected for this offering are from the 1972 IC lot with Pullman roofs. These cabooses feature accurate plated windows and plated end marker light boxes. The interior is lit along with era-appropriate flashing FRA red lights applied to each end. That beautiful gray paint allows you to pause and peek at many little details. Did you notice the intricately rendered -Junior JAL-Tread- raised-cleat treadplate on the extended end walkways and step treads? How about that detailed oil tank gauge, fuel oil fill and floor spill drain on the A End of the caboose? This scheme is available in 4 prototypically accurate numbers, with each SKU featuring slightly different lettering and data placement to match the prototypes.
N Scale 40ft Boxcars - CN Buffalo (4pk), with Foam Nest
Road #429004, 429049, 429053, 429245
Built in the mid-1950s to carry newsprint, these 40ft boxcars with Bettendorf trucks were converted to carry grain in the late 1980s, in a project financed by the Government of Canada. They were known as Buffalo Boxcars. Canadian National is one of the largest railroads headquartered in Canada, with over 20,000 miles of track and service from Canada into the United States.
HO FMC 4700 Covered Hopper - VUHX #110
MODEL FEATURES:
- Separately-applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, -brake cylinder and triple valve
- 100-ton trucks with 36 inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
- Factory applied roof walk, roof hatch, end details, ladders, and wire grab irons
- Two outlet grate variations
- Accurately painted and printed on a highly detailed, injection molded body
- See-through etched metal end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- All 3-packs feature unique road numbers
- Minimum radius: 18 inches
HO Enterprise 2-Bay Covered Hopper - GFCX #134
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
Plastruct 91002 ABS Sheet 0.02 (5pcs pkg)
Specifications in Inches:
Thickness: .020 (0.5mm)
Width: 7 (175mm)
Length: 12 (300mm)
HO 13/32 inch Open Web Truss - Cellform Style (2pcs)
Use for roof trusses, space frames and other modern and/or futuristic steel structures. Precision Injection Molded in Styrene Plastic. Manufactured with a special tongue and groove connection feature to quickly and accurately attain the desired length.
SCALE
ALL
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
5/16
HEIGHT IN MM
7.9mm
WIDTH IN INCHES
13/32
WIDTH IN MM
10.3mm
THICKNESS IN INCHES
7/64
THICKNESSS IN MM
2.8mm
LENGTH IN INCHES
4-1/16
LENGTH IN MM
100mm
HO RTR 68Ft Bulkhead Flatcar - Western Pacific(TM) #1489
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21015
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO AutoFlood III RD Coal Hopper - UP/CMO #504273
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Cal Scale Rerail Frog in Bracket Side Mount pkg(2)
Die cast metal
HO - Siemens ACS-64 - DCC & Sound - Amtrak #619
Features:
DCC sound-equipped ACS-64 includes a TCS WOWSound CD-Quality 16-bit 44,100Hz decoder with Audio Assist
Sounds package includes: horn, bell, cooling fan/power inverter, pantograph extension and retraction, coupler close/release, brake release and application, momentum, crew alert, grade crossing quill, departing and arriving station announcements, and more
Keep-Alive device for uninterrupted operation, even over dirty track and remappable light functions, die-cast frame, and selector switch for choice between rail and pantograph operation.
Performs best on 22inch radius curves or greater
HO Scale 1:87
Product Measurements: L 9.5 in., W 1.5 in., H 2 in.
Retail Package Measurements: L 12.5 in., W 2 in., H 3.5 in.
HO 10 Inch Track Alignment Gauges - Curved - 36 Inch Radius
RibbonRail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking, and joining rail. Track Alignment Gauges are precision machined to NMRA standards and will work on any code of HO Scale rail. Available in many curve radii as well as straight.
FEATURES:
- One time run of these road numbers, order now - limited quantity available
- Prototypes seen from coast-to-coast 1974 to the present
- Handles all types of general freight loading
- Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
- 41ft 3in Truck Centers
- 15ft 2in Tall
- 10ft 8in Wide
- Fully assembled
- Correct 33in RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Athearn HO Scale - RTR 30,000 Gallon Ethanol Tank Car - CTCX - #1 - 3pack
Detailed Information
301135, 301140, 301155
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
Urban Retaining Walls - Kit
Combine roads and rails easily in N Scale scenes with the Cornerstone Urban Retaining Walls kit. This highly detailed and versatile model is adaptable to new or existing layouts, and offers various options to build common designs supporting elevated railroad rights-of-way in areas where increasing auto traffic required eliminate of level tracks and grade crossings. A realistic addition to any commerical, residential or industrial area from the 1900s to the present, the kit features:
-Simplifies modeling elevated tracks in new or existing scenery
-Simulates poured concrete walls built from the 1900s on
-Easily expanded by combining kits and customized with molded cut lines
-Easy to use with Urban Steel Overpass (933-3871) - adaptable to other bridge kits
-Great value with 56 parts molded in concrete gray including:
-8 tall, 4-panel retaining sidewalls each: 4-3/4in Long x 1-1/2in Tall 120 x 38.40mm
-4 tall 3-panel retaining end walls each 3in Long x 1-1/2in Tall 76.2 x 38.40mm
-8 short, 4-panel retaining walls each 4-3/4in Long x 1/2in Tall 120 x 14.4mm
-8 tall connectors
-8 short connectors
-4 customizable interior reinforcing cross pieces
-8 Railings
-8 short wall supports
Peco SL 111 Nylon Insulating Rail Joiners HO Scale - Code 70, Code 75, Code 83
New part number for SL8311 for Code 83 Nylon Insulating Rail Joiners HO Scale
12 pc package
HO 40ft 16K Gallon Tank Car - Amaizo/UTLX #66821
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Minneapolis & St. Louis (M&StL Red) #54992
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO NSC Ballast Hopper - CP Rail #457030
1984+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO RTR 68Ft Railgon Gondola - Chicago Heights Terminal Transfer #287074
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO 2-8-0 Consolidation - Sound/DC/DCC with Smoke - Canadian National #2124
Industry-leading Model Features:
ALL-NEW Paragon4 Sound & Control System
Synchronized Puffing Smoke with Chuff Sound
Variable Puffing Smoke Intensity and timing
Integral DCC Decoder with Back EMF for Industry Best Slow Speed Operation in DC and DCC
Precision Drive Mechanism engineered for continuous heavy load towing and smooth slow speed operation
5-Pole Can Motor with Skew Wound Armature
Heavy Die Cast Boiler, Tender Body, and Chassis for Increased Tractive Effort
Premium Caliber Painting with Authentic Paint Scheme
Prototypical Light Operation with Separately Controllable Headlight, Reverse Light, Cab Light, and Front Marker Lights
Factory-installed Engineer and Fireman Figures
Many Separately Applied Details such as Handrails, Grab Irons, Ladders, Piping, Cab Glass, Whistle, Brass Bell, Markers, and Many Others
Equipped with Rubber Traction Tires for Increased Pulling Power
Recommended Minimum Radius: 18 inches
Prototypical Sounds of an early USRA steam locomotive, with several alternative whistles
Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLIs own integral DCC Decoder factory installed. Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limiteds Paragon3 Series models.
Paragon4 Sound & Control System Features:
Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
Built-In capacitor pack to navigate imperfect track
Capacitor Pack automatically disabled on program track for full compatibility with JMRI Decoder Pro
Pro Lighting Mode offers individual control of all lights on model
Switcher Mode for precise low speed control.
Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
High Resolution Audio
Quillable Whistle for various whistle lengths and patterns
Choice of 3 selectable Horns
Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
Adjustable bell ringing interval for faster or slower bell
Numerous user-mappable functions with available keys
Johnson Bar Sound at Direction Change
Multiple realistic passenger and crew sounds play on command
Grade Crossing Automatic Signal
Automatic Forward / Reverse Signal - When activated, stopping triggers and stop whistle toot. When moving forward from a stopped position, toots twice. When moving in reverse. toots three times.
Chuff sound intensity varies with load
Individually adjustable sound volumes for each effect
EZ Reset Button for quick return to factory default settings
HO Bi-Level Auto Rack - Union Pacific/TTGX Flat Car #158925
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO GMD SD40-2W - DC/DCC Ready - Canadian National (Sergeant Stripes) #5341
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
N Scale Single Portal - Random Stone (2pk)
Tunnel portals, retaining walls, culverts, and roads reinforce natural terrain contours and add functionality, realism, and interest to your layout!
Create the look of a random stone portal over a single N scale track. Color with Earth Colors Liquid Pigment.
DIMENSIONS:
Outside: 3-1/8 W x 2-11/16 H inches (7.93 cm x 6.82 cm) each
Inside: 1-9/16 W x 1-15/16 H inches (3.96 cm x 4.92 cm) each
HO PS-2-4427 High Side Covered Hopper - CPAA Delivery 1-1970 #388162
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36in 8243; Wheels
Canadian Pacific CPAA NA Delivery 1-1970 shows as-delivered gray cars leased from North American Car Corporation to Canadian Pacific. These cars feature the distinctive NAHX Roman-style data lettering that also carries over to the CPAA reporting marks and numbers. The North American Car black/white/red badge down along the sill provides a tiny bit of color to this gray lease scheme. The models come equipped with Youngstown EZ-Roll gravity gates and Apex-style end crossover platforms. With a 1970 build date, these Pullman-Standard lot cars leased to NAHX include center sill supports between the bays and open-style end running board supports. The finely printed capacity data and internal liner data varies between each car number. And yes, don?t worry, these NAHX cars have their accurate serial number stencils along the centersill of the car on each side. Black 100-ton Barber S-2 trucks with accurate (and rotating!) Timken caps finish the model.
HO Union X-3 Tankcar - Procor Limited #38110
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO 45Ft Trailmobile Dry-Van Trailer w/ Side Door - CN Piggyback #204910
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
HO Scale Code 83 Flex-Track Brown Tie 25 pcs, 36inch 90cm Long Section
Use RibbonRail Tools to make radius accurate the first time.
Patterned Sheets - Safety Tread - Double Diamond Plate (2pk)
Color: White
Scale: 1:48
Description: Accurately Vacuum Formed in .020 (0.5mm) Styrene sheet. The listed scales are only suggestions as many patterns have no definitive size.
Quantity: Pack of 2
Height in Inches: 7 inches
Height in MM: 175mm
Width in Inches: 12 inches
Width in MM: 300mm
Material: Styrene
Thickness in Inches: 0.020
Thickness in MM: 0.5mm
HO GE C30-7 - DCC Ready - ATSF Santa Fe (Early Scheme) #8025
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
HO Auto-Max Carrier - WRWK #68155
Era: 2016+
MODEL FEATURES:
- Separately applied ladders, brake rigging, stirrups, and handbrake details
- Simulated corrugated roof
- Full articulation with flexible diaphragm
- Safety striping
- 70-ton roller bearing trucks
- 33 inch machined metal wheels with RP25 contours
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
In 1999, Gunderson began production of the Auto-Max articulated auto rack car. This unique car can carry 22 SUVs on three sets of internal ramps. Measuring over 140 feet long and 20 feet tall from the railhead, the Auto-Max pushes the operational and clearance limits of the railroad industry.
Tru Color Paint - Acrylic - Alaska Railroad Yellow - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
N Scale Graffiti Decal Set - Contemporary Graffiti #2 - Waterslide Decals
Walthers SceneMaster 3161 HO Scale - Wrapped Lumber Load for 72 FT Centerbeam Flatcar - Weyerhaueser
Put your railroad to work moving these Walthers SceneMaster Wrapped Lumber Loads from sawmills to local building suppliers. Made especially for the WalthersMainline 72Ft Centerbeam Flatcars ( 910-4800 series, each sold separately), each is prepainted and lettered in authentic schemes, and snaps easily onto the car to add realistic detail in a matter of minutes.
HO Evans 53Ft Double Plug-Door Boxcar - Ralston Purina (As Delivered) #103
Features:
70-ton roller-bearing trucks
Blackened metal wheels
Two-piece underframe
Separate brake cylinder
Air reservoir
End platforms
AccuMate couplers
AccuMate couplers are made under license from AccuRail, Inc.
HO RTR Thrall 5-Unit Rebuilt 40Ft Well Car - Trailer-Train DTTX #748204 A-E
(yellow, Small Red Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft on both single and five-unit cars. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers - limited quantiuty, order now!
100- and 70-ton roller bearing trucks
Correct 36inch and 33inch RP-25 turned metal wheelsets
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
Proto MAX(TM) metal knuckle couplers
HO Dash 8-40CM - DCC & Sound - Canadian National: Stripes #2405
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
85ft General American G85 Flatcar - Trailer Train - GTTX - Brown #300345
Product Information:
Limited edition - one time run of these road numbers
Prototypes handled trailers and containers from 1961 to mid-1980s - used for general service loading into the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in up or down position or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
33In turned metal wheelsets
Proto MAX metal knuckle couplers
Add more realism in minutes with SceneMaster trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24In
HO 40Ft High Cube Outside Braced Boxcar - Southern Pacific #659101
HO GP9 - DCC Ready - Chesapeake & Ohio #6173
ETA: May 2023
Detailed Information
C&O FEATURES:
Short hood mounted bell
Forward 5-chime horn
Dynamic brakes
Tall exhaust covers
Expert approved art
Between 1955 and 1957 C&O bought 363 GP9s. These units were the backbone of the fleet, used on both road trains as well as local service. In the mid 60s C&O adopted a new simplified paint scheme with the large C&O initials on the long hood. Although the purchase of newer high horsepower units displaced many GP9s to secondary service, most of the fleet soldiered on into the mid 80s. Many units were retired in this version of C&O dress. These road numbers lasted into the mid 1980s which allow the widest range of modelers to benefit from this release.
ROAD NUMBER SPECIFIC FEATURES:
#682
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#683
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#688
Dynamic brakes
bell mounted on long hood
#690
Dynamic brakes
bell mounted on long hood
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
N Scale Short Barrel Ore Hopper - CN Scale Test Car #52283
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO F89-F89ft 8in TOFC Flatcar - XTTX #150247
MODEL FEATURES:
- Die-cast underframe
- Weighted for trouble free operation
- Raised and lowered hitches included
- Use for dedicated intermodal trains or mixed freight
- Detailed deck
- Wire formed brake plumbing
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Separately applied wire grab irons on and ladders
- Separately applied brake ratchet
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Machined metal wheels
- Wheels with RP25 contours operate on Code 55, 70, 75, 80, 83, and 100 rail
- Body mounted McHenry operating scale knuckle couplers
- Minimum radius: 22 inches
- Recommended radius: 24 inches +
- XTTX version: cars have 4 hitches to handle different trailer lengths. Extra raised and collapsed hitches included to model any configuration.
Static Grass Basing Glue
Copper Flat Sheet - 0.025inch x 4inch x 10inch
1 piece
Length: 10inch
Width: 4inch
Thickness:0.025inch
Evergreen Scale Models 4080 .080in Opaque White Polystyrene V Groove Siding (1sheet)
HO MLW FPA-2u & FPB-2u - DCC/Sound - VIA Rail Canada #6759 & 6859
The entire FPA-2u and FPB-2u production is a CONDITIONAL RELEASE. If Rapido receives enough pre-orders by the order deadline, then production will proceed! If not, then they will never tool these models, and your deposit will be credited back to you.
The Rapido FPA-2u and FPB-2u models feature:
- The only HO scale MLW FPA-2u and FPB-2u units ever. Full stop. End quote.
- Operating headlights, class lights and back-up lights
- Canadian-cast Dofasco Type B trucks
- Full underbody piping and conduit
- Separate grab irons and handrails
- Correct MLW-specific large-capacity fuel tanks
- Heavy, die-cast chassis
- Rapidos improved 5-pole motor with dual flywheels
- Full, multi-color interior
- DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
- Accurate sounds recorded from the REAL FPA-2u #6758
- Improved light grey color on the CN 1961 scheme
HO EMD SD7 - DC/Silent - Southern Pacific (Black Widow) #5323
Southern Pacific
- Steam generator equipment details on short hood
- Correct Mars style -ash can- light on both ends of the locomotive
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO ACF 4600 3-Bay Centerflow Hopper - DT&I/Brown #10333
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
HO - 4750 Cubic Foot Rib-Sided - 3-Bay Covered Hopper - Illinois Central - #765977
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-Etched Metal Roofwalk
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO Class D10h 4-6-0 - DC/Silent - Canadian Pacific #1022
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
HO Locomotive Data 2010+ - Decals
This complex sheet includes 340+ different styles of data used on locomotives with a total of 2100+ total decals. Auto Start, Caution, Electrical, Fire Extinguisher, etc. labels for both EMD and GE are all included. Sheet comes with full color 11x17 fold-out sheet guide.
HO SD90MAC-H Phase I - DCC & Sound - Union Pacific #8509
Detailed Information
UP FEATURES:
#8503 & #8500 represent the first renumbering, originally delivered as #8203 and #8160 respectively.
#8509, #8512, and #8520 are modeled with the starter capacitor removed and the EOT mounted further forward on the fuel tank.
Union Pacific became the only buyer of the SD90MAC-H, known to them as SD90AC, when Canadian Pacific transferred their order to the Phase 2 variant. The first 7 were considered pre-production units and wore 2-3 numbers during their lifetime. The 8500 series we are offering represents the second and third order of SD90MAC-Hs that were delivered between 1997-1999 and before their final renumbering to the 8900 series.
SD90MAC-H SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and ?printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO Ultimate Soda Jerk Detail Set - Decorated
HO Code 100 Single Slip Insulfrog - New Design
Angle: 12 degree
Length: 249mm (9 ¾in)
Nominal Radius: 610mm (24in)
HO PS4750 Covered Hopper - SOO Line (Original 1-1980) #75459
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
SOO -Original 1-1980- brings back a popular PS4750 paint scheme. We offered a different 1979 group of SOO cars about 8 years ago (!) and ever since, our mailbox has been full of requests for MORE SOO. We are very pleased to finally offer another SOO lot, this time from the 400-car 1980 Pullman group. These covered hoppers feature truck mounted brake beams, a side-mount train air line and scale-sized Miner -Selflok- outlet gates. Painted in that special shade of -Soo Line White- (Soo modelers know exactly what we mean), the models show off the classic yellow wheat stalk graphics and green SOO LINE roadname. An accurate and critical car for SOO and CP Rail modelers and lovers of the PS4750 everywhere, these cars continue to serve in grain and in buffer car services.
Back-Up Nose-Mounted Lights - Pyle Type E & F Units (2)
- Single sealed beam.
1:32 ABS LADDER (2pcs)
Use as straight ladders commonly found in numerous industrial, commercial, and residential applications. Note, in most industrial applications using a fixed ladder, a cage is also desirable. See CL Safety Cage & Ladder Sets. Precision Injection Molded in Gray ABS Plastic.
Ideal for all outdoor or professional model construction where model life is critical.
SCALE
1:32
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/8In
HEIGHT IN MM
9.5mm
WIDTH IN INCHES
39/64In
WIDTH IN MM
15.5mm
LENGTH IN INCHES
15In
LENGTH IN MM
375mm
HO EMD SD60M - Standard DC - Soo Line #6061
FEATURES:
- Limited edition - one time run of these roadnumbers!
- Prototypes in service 1989 to the present in main line & regional service
- First SD60M safety cab with three-piece windshield
- Open grating on steps
- 21-pin DCC plug
- Same powerful drive as WalthersProto(R) locos featuring:
5-pole skew-wound motor
14:1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant & directional LED headlights
- Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately
- RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
HO Bathtub Coal Gondola - DREX (ex-Procor) #104061
Built: 5-05
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
Built & Ready Landmark Structures - U.S. Post Office
Assembled - 4-1/8 x 4-3/32 x 2-3/4 inches (10.4 x 10.3 x 7cm)
The Woodland Scenics(R) Letters, Parcels & Post is there for all your mailing needs. Hand-painted and weathered, this layout-ready post office features wood walls sitting atop a stone foundation and is and loaded with plenty of details to set the scene. Features include a covered porch that provides a place to wait when the lines are long, and a set of stairs leading to a side door. A chimney, rear loading dock and an unattached mailbox for dropping off mail at any time of day round out the detailing. Letters, Parcels & Post also contains interior and exterior LED lighting to show off the printed interior. The installed LED lighting is designed for use with the Just Plug(R) Lighting System. 30mA current draw.
Power Truck - HTC-SD40-2/40T-2/45T-2- 1 per pack
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX 6 Pack
800, 802, 804, 805, 808, 809
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Signal - Hooded Modern (Head Only)
Pkg of 1
HO 50ft 100-Ton 4-Bay Hopper - CSX #346080
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from mid-1960s to mid-2000s
- Standard car for 1980s and later Powder River unit coal trains serving power plants
- Also used to transport stone and other bulk loads
- Die-cast metal underframe for excellent performance loaded or empty
- Sloped sheet braces & update brake gear
- Correct 36 inch turned metal RP-25 wheels
- Proto MAX(TM) metal knuckle couplers
5/16 inch OD Round Stainless Steel Tube - 22 Gauge x 12inch Long
Round Stainless Steel Tube (1 pc)
Outside Diameter: 5/16 inch
N Scale Flexi Flo Hopper (Late) - MDTX Repaint #897885
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO 5820 Covered Hopper - Procor/UNPX (Union Carbide) #122044
Era: November 1977+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO SD70M - DCC & Sound - EMDX/Maroon/Black #7024
Detailed Information
EMDX FEATURES:
Solid maroon/black scheme
Large EMD front plow
Round EMD style front ditch lights
Can-style roof antenna
Early EMD trucks with hidden bearings
During 1995, EMD built 22 SD70Ms for their lease fleet, including 3 official demonstrators built in 1992. Painted in 2 schemes (solid EMD maroon and black, and maroon, grey and silver), EMD was able to provide many different railroads to test and compare their new 710 prime mover to other current models. These could be seen all over the US and added a splash of color when mixed in locomotive consists. By the early 2000s, they were sold to CSX and eventually painted into CSX colors.
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO SD38 - DCC Ready - CanDo Rail Services #5201
CCGX FEATURES:
CanDo Rail Services is a contracting company based out of Brandon, Manitoba, Canada. They preform track maintenance for large industries, operates as a shortline, and contracts switching services in Ontario, Manitoba, and Alberta Canada.
ROAD NUMBER SPECIFIC FEATURES:
#5201
- Ex: DMIR. Short fuel tank
- triple clasp brakes
- M3 horn
- UP style plows
- all-weather windows
- ditch lights on both ends
- Classified as a SD38AC
#5202
- Ex-BLE. Medium fuel tank
- high-mount truck brakes
- M3 horn
- UP style plows
- all-weather window
- ditch lights on both ends
- Classified as a SD38AC
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
Spray Can - Light Green (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO F45 - DCC/Sound - Wisconsin Central #6655
WC FEATURES:
- Purchased from Santa Fe in 1995; retired in 2001
- Operated in road service with each other and other WC power
- Details remained much the same as on Santa Fe
- WC F45s were equipped with ditch lights soon after repainting. Genesis F45 tooling does not accommodate ditch lights; however, we will include two ditch light housings and LEDS in the box for modelers to install if they wish.
ROAD NUMBER SPECIFIC FEATURES:
#6653
- Large and small Firecracker antennas
- RS3L horn
#6655
- Large and small Firecracker antennas
- P-3 horn on stand
#6656
- Small firecracker antenna
- and ATSF-style antenna stands
- RS3L horn
LOCOMOTIVE FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Coupler cut levers
- Flexible rubber MU hoses
- Flexible rubber trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Fine-scale Celcon handrails for scale appearance
- Windshield wipers
- Lift rings
- Wire grab irons
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Sander lines
- McHenry scale knuckle couplers - Kadee compatible
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED bulbs for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
- Flush mounted port hole window glass
- Flexicoil-C sideframes with high brake cylinders
- Minimum radius: 18 inches
- Recommended radius: 22 inches
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
HO FMC 5503 Double Door Boxcar - Minnesota, Dakota & Western #7181
Features:
Double Sliding Doors
Wire grabs
Etched parts
Plate C Box Car
X-Panel Roof
HO Scale - 53Ft Hyundai Hi-Cube Container 2-Pack - Late Roof Schneider - SNLU #977980,978048
HO GP50 - DCC & Sound - Norfolk Southern #7054
Detailed Information
NS FEATURES:
Phase I Body with rounded blower housing
Long hood forward setup with high short hood
Southern style 5-chime horns on both ends
Long hood mounted bell
Dual Firecracker antennas
Timkin bearing trucks
Hood mounted walkway lights (non-operational)
Large EMD style plows and ditch lights on both ends
Built in 1980 for the Southern Railway, these distinct high nose long hood forward locomotives were painted into Norfolk Southern colors after the Southern / Norfolk Western merger of 1982. They retained most of the as built features other than ditch lights added in the 1990s.
ROAD NUMBER SPECIFIC FEATURES:
#7037
Earlier NS scheme with dashed frame stripes
#7054
Newer NS -horse-head- logo with solid frame stripes
#7085
Earlier NS scheme with solid frame stripes
GP50 LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Walkway tread
Lift rings
Sander lines
Windshield wipers
McHenry scale knuckle couplers - Kadee compatible
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO 100-Ton Open Hopper - Southern Pacific #481120
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
N Scale New River Mining Company - Kit
Product Information
The prototypes for coal mine tipples like the N Scale Walthers Cornerstone New River Mining Company kit are typical of 1950s corrugated structures, many of which are still served today. Based on a trackside coal tipple for loading hoppers or gondolas, this easy-to-build kit features realistic corrugated metal construction, steel supports and separate ladders and stairways. New River is set up to load hoppers on three tracks, and if youre modeling a mine that loads coal trucks for short hauls you can choose to replace a track with a road. The New River Mining Co. also includes a conveyor with supports that can be run underground into the mine or distant mine head. New River Mining is just one of a wide variety of Cornerstone N Scale industrial buildings.
Authentic coal tipple for late steam or diesel eras
Typical of coal loaders across the continent
Use alone at trackside or as part of a larger coal mine operation
Realistic corrugated metal construction
Conveyor and supports for above or below-ground operations
Separate slack bin
Handle hoppers, gondolas or trucks on three loading pockets
Separate windows, walkway and stairs
Includes main building, truck loading facility and conveyor
Easy-to-build plastic kit
Molded in appropriate colors and clear glazing
As shown New River Mining Company measures:
Main Building: 7-1/2 x 5-3/8 x 5-5/8inch (19 x 13.6 x 14.2cm)
Truck Building: 4-1/4 x 1-5/8 x 4-3/8inch (10.7 x 4.1 x 11.1cm)
N Scale Double Track Plate Girder Bridge 7-13/32inch 186mm (black)
HO All-Weather Cab Window - Plastic w/Glazing 0.4 x 0.48 inch (2pk)
HO RTR PS-2 2600 Covered Hopper - Norfolk & Western (NW) #170729
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
RTR 60Ft DD Hi-Cube Box - UP/Building America #1
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO 40ft ACF Modernized Welded Boxcar - Pennsylvania Railroad #87516
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO EMD SW900 - LokSound 5 Sound & DCC - Lehigh Valley #121
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- ESU LokSound 5 sound for DCC and DC layouts
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
EMD #8000
EMD SD80MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Models equipped with marker lights will be illuminated
Rubber MU hoses for durability
All New Tooling
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
See through steps
Illuminated ground lights
Front and Rear Illuminated Numberboards
Presenting EMDs 5,000HP 6-axle diesel in a whole new level of authenticity. Starting in 1995, EMD revived the 20 cylinder engine design, last seen in the SD45, and introduced the 5,000 HP SD80MAC. Athearn is pleased to announce this locomotive in Genesis 2.0.
EMD FEATURES:
Illuminated front and rear red marker lights
Illuminated Ditchlights alternately flash per prototype w/ effect on DCC+Sound version
Three–panel dynamic intake per EMD prototype
LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE:
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Digitrax SDXN147K1E - Series 7 Drop in Sound Decoder
8 CV-Selectable Steam & Diesel Sound Schemes Included
Mobile Decoder with SoundFX v3
For Kato SD40-2 and similar
Drop-in light board replacement
1.0 Amp/2 Amps Peak
4 FX3 Functions, 200ma Output
8 Ohm 9x18x4 mm oval speaker
100uF Capacitor
HO Scale GP38 - DC/DCC Ready - Norfolk Southern (High Nose w/ Ditch Lights) #2795
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO EMD SD70ACe Diesel - DCC Ready - Norfolk Southern (Savannah & Atlanta Heritage) #1065
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
NS FEATURES:
Swapable alternate roof with leader PTC antenna array
(Also available separately [ATHG68899])
High-mounted headlight
Isolated cab
Front and rear illuminated ditch lights
Late handrails
Norfolk Southern - Heritage
In 2012, Norfolk Southern unveiled a group of 20 locomotives painted to honor their predecessor roads. In the late 2010s, the units had their roof configurations modified to accept Positive Train Control antennas. Both roof styles are included.
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
HO Lightweight Coach - Erie Lackawanna #1306
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO GMD SD40-2 - DCC Ready - Canadian Pacific: B Unit #5769
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
N Scale 52Ft Mill Gondola - Wisconsin Central #54241
Detailed Information
MODEL FEATURES:
Body-mounted McHenry knuckle couplers installed
Fully assembled and ready for your layout
Screw mounted trucks for accurate tracking
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
RTR 30,000 Gallon Ethanol Tank Car - GATX (3 pack) Set 3
Detailed Information
MODEL FEATURES:
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Body-mounted, McHenry operating scale upper and lower shelf knuckle coupler
Photo-etched metal walkways and end platforms
100 ton roller bearing trucks with 36 Inch machined metal wheels
Weighted for trouble-free operation
Minimum radius: 18 Inch; Recommended radius: 22 Inch
Highly-detailed, injection-molded body
Wire safety rails and end handrails
RP25 contours operate on all popular brands of track
Window packaging with Interior plastic blister for easy viewing
All 3-packs feature unique road numbers
HO GE ES44DC - DCC & Sound - CSX/Boxcar #5250
ETA: June 2023
Detailed Information
CSX FEATURES:
K5HL horn
Regular bell
Low cab headlight
High mounted rear headlight
Large plow
Rear drop step
Alternating front ditch lights (Function in DCC mode)
Accurate colors and artwork
ROAD NUMBER SPECIFIC FEATURES:
#5226
As-Delivered YN3 paint scheme
#5228
Unique primer painted version with CSX logo on the nose#5245
#5245
As-Delivered YN3 paint scheme#5250
#5250
Later CSX -Boxcar- logo repaint
ES44 SERIES LOCOMOTIVE FEATURES:
Illuminated ditch lights
Tinted cab windows
Large antenna dome
GPS dome
Hand brake panel grille
Nathan K5HL horn
5000-gallon fuel tank
Low or high front headlight per prototype
See through dynamic brake intakes
Low or high front headlight per prototype
See through dynamic brake intakes
Short auxiliary cab rear left-side doors
Right side forward electrical cabinet with X-Panel
Engine compartment side grab irons (Non-CP Units only)
No engine compartment side grab irons (CP Units only)
Flush radiator compartment doors
Flush heat exchanger housing and top radiator grilles (Non-CP Units only)
Raised heat exchanger housing and top radiator grilles (CP Units only)
Dynamic brake exhaust vents spaced per prototype
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Intermountain Railway Company 14-Panel Coalporter(R) Coal Gondola Mitsui Rail Capital MBKX (silver, blue)
#300990
N Scale Curved Track - 15-Degrees (4pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed.
The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of
derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
Perfect for moving bulk loads of all kinds that dont require protection from the weather, the WalthersMainline 34ft 100-Ton Two-Bay Hopper is a versatile addition to HO operations!
One time run of these road numbers, order now - limited quantity available!
In service from the 1970s to the present
Used to haul ballast, sand, gravel, ore and other bulk loads
Factory-applied door and brake details
Heavy die-cast metal underframe
Add a realistic load in minutes with the cast resin Chooch Gravel Load (214-7292) sold separately
Correct 36in RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
N Scale 40ft HC Corrugated Container - ONE (2pk)
(Painted Cherry Blossom Magenta)
FEATURES:
- All New Tooling; -42- corrugated sides.
- IBC(Inter-Box Connecting pins) in scale ISO locations.
- JTC Magnetic connecting system: 3-magnets bottom & metal top plate.
- Detailed printing as per photographs.
- The IBC pins mate with JTC 40ft open top containers with Magnets, JTC 20ft containers with Magnets, Atlas 40ft containers, and future Jacksonville Terminal Company containers.
- Compatible with JTC Retro-fit underframe kits to stack M-T and S-T brand containers on top.
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) (6pk) #2
Includes the following numbers, all individually packaged:
#652973
#653245
#653287
#653000
#653023
#653036
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO EMD SD7 - DCC & Sound - Southern Pacific (Orange Lettering/ Black Widow) #5318
Southern Pacific
- Steam generator equipment details on short hood
- Correct Mars style -ash can- light on both ends of the locomotive
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO Alphabets - Railroad Roman - Black - Waterslide Decals
Equipment Type: Railroad Roman - Standard - Black
Description: (formerly 87-69-2) Alphabets - Railroad Roman - Black - Waterslide Decal - HO Scale
3/8 inch OD Round Stainless Steel Rod - 22 Gauge x 12inch Long
Round Stainless Steel Rod - Not hollow (1 pc)
Outside Diameter: 3/8 inch
Sisters of Mercy Thrift Store - Kit
Foot print 6 X 4 inches -15 X 10cm
What skid row would be complete without a second hand store? This kit features a rooftop water tank and funky cracked stucco. Included are detailed hydrocal castings, full-color signs, laser-cut doors and windows and complete easy-to-understand assembling, painting and aging instructions.
Cast Hydrocal plaster walls, plastic door & windows and full color paper signs and awnings. Perfect for your business district from the cracked stucco to the rusty tin staircase, this building is just brimming with character. This kit features detailed Hydrocal castings, plastic doors and complete, easy-to-understand directions.
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
HO MLW M420 - DCC & Sound - BC Rail (Red/White/Blue) #642
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
Evergreen Scale Models - Opaque White Polystyrene Channel .060In x 14In (4 pcs pkg)
HO EMD GP35 Low Nose - No-Sound / DC - Canadian Pacific #5004 (action red, white, black, multimark logo)
This HO Scale Stealth Series EMD GP35 from Broadway Limited is based on the ubiquitous EMD GP35 4-axle diesel-electric locomotive built by EMD and subsequently General Motors Diesel in the mid 1960s. Over 1300 of these locomotives were produced, and they were operated by virtually every major railroad in the United States. Addtionally 26 units were built for Canadian railroads and another 57 units were built for Mexican railroads. These freight locomotives were powered by EMD 567D3A 16-cylinder engines that generated 2500 horsepower.
This Stealth Series no-sound/DCC-ready model operates on DC out of the box, or a modeler can easily install their DCC decoder of choice. Out of the box, front and rear lights are directional, and other lights are always ON with track power. Additionally some lighting functions may be missing depending on selected aftermarket decoder the modeler installs. This model includes a 21-pin decoder socket so you can add your favorite DCC or sound decoder when you're ready. It also features a built-in speaker so you won't have to add one later. Other features include a heavy die cast chassis and select roadname-specific details. Its wheels profiled to operate on Code 70 and larger rail and curves of 18" radius but larger curves are recommended. The EMD GP35 is one of many Broadway Limited HO Scale Paragon4 locomotives.
HO 7600 Garbage Truck - Assembled Sanitation District
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Position-able Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
Also known as the WorkStar, this series of technologically sophisticated, heavy-duty trucks is powered by an 11-liter (390 horsepower) or 13-liter (475 horsepower) diesel engine, and can be built on a single- or dual-axle platform. The combination of power and versatility make it a favorite with construction, mining and utility companies.
INTERNATIONAL(R) and other International Truck trademarks are licensed by International Truck Intellectual Property Company, LLC
Woodland Scenics Static Grass 619 4mm Light Green
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CWSX Data Only
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Tunnel Portals Concrete
Great for single track tunnels entrances and exits. Color with Earth Colors Liquid Pigments.
Outside dimensions: 2 7/8inch w x 2 1/2inch h.
Inside dimensions:1 7/16inch w x 1 7/8inch h.
HO 53Ft Gunderson Husky-Stack Well Car & Containers - Canadian Pacific #527307
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (6 pkg) #2
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
16095 Black with Black Truck Caps
16104 Black with Black Truck Caps
16118 Black with Black Truck Caps
16129 Black with Black Truck Caps
16135 Black with Black Truck Caps
16153 Black with Black Truck Caps
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
SmokeBox Graphics HO DF5987 Stencil Style Data
Decal set with a variety of data for 50 foot boxcars, including weights, dimensional data, door markings, and maintenance stencils in both black and white. Useful for data on patches or partial repaints, especially over graffiti. Will provide complete data for up to four cars, and partial data for several more
HO Code 83 Nickel Silver DCC Friendly #6 Turnout - Right Hand
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 83 rail!
Combining great looks and great performance in a complete system, each item comes fully assembled and features:
-Thin profile ties in realistic dark brown with enhanced wood grain detail
-Fine profile molded spike and tie plate details on each tie
-Spike-mounting holes positioned next to the rail
-Molded starter points on underside of ties for fasteners
-Custom formulated nickel silver rail for outstanding electrical conductivity
In addition to these details, each DCC-friendly Code 83 Turnout features:
-Snap-action points
-Solid rail points for better conductivity
-Isolated frogs with built-in jumper for powering as desired
-Current jumpers entering and leaving the frogs
-Insulated tie bar
HO - Nathan Diesel Air Horn (Brass Casting) - 5 Chime K5
Accent Shakers (2pcs)
-For plant hues and flowers
-Multiple opening sizes
-Easy fill
HO GE C30-7 - DCC & Sound - ATSF Santa Fe (Early Scheme) #8051
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
HO 73Ft Center Partition Car - Union Pacific #275227
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended.
Athearn Genesis HO 13,600 Gallon Acid Tank Car, UTLX 3 set
Athearn Item #: ATHG25629
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Two different body phases (early and late)
Many separately applied details
Etched metal walkways
Different top platforms as appropriate per prototype
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18in
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry (TM) scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
HO Procor 3000CuFt Aluminum Hopper w/Handrails - UNPX/ Procor Wordmark #127241
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
CP RAIL (1968 to early 1980s)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
HO 50ft Evans Double-Door Plug Boxcar - Wisconsin Central #1017
MODEL FEATURES
-Fully assembled and ready for your layout
-Separately applied end ladders, brake wheel and underbody details
-Weighted for optimum performance
-Machined RP25 profile 33in metal wheels
-McHenry scale knuckle spring couplers installed
N Scale Bridge Abutment (2pk)
- Common prototype design used with various types of bridges
- Fits steam-, diesel- and modern-eras
- Simulates poured concrete construction
- Molded cut lines for easy height adjustment to 2-11/16, 2-3/16 or 1-3/4 inches
- Molded in gray plastic
- Use with Cornerstone Single-Track Arched Pratt Truss Bridge (933-3870), Double-Track Truss Bridge (933-3242), Through Plate-Girder Bridge (933-3820), and Bridge Piers (933-3880) each sold separately - adaptable to most model bridges
Standard Assembly with Wing Walls measures:
Single-Track: 7-3/8 inches length x 5/8 inch width
Double-Track: 8-9/16 inch length x 5/8 inch width
Height with Headwalls:
Short Headwall: 3-1/2 inches
Large Headwall: 3-3/4 inches
Wing Walls (each): 3-1/8 x 1/8 x 3-3/8 inches
HO Alphabets - Railroad Roman - Blue - Waterslide Decals
Description: (formerly 87-69-7) Alphabets - Railroad Roman - Blue - Waterslide Decal - HO Scale. Letters & Numbers are scaled to 4inch, 6inch. 8inch, 12inch & 16inch height
HO 4650 Centerflow Hopper - Wisconsin Central (CN) #87044
Features:
Etched metal roof walks
Detailed brake gear
Blackened metal wheels
Accurate painting and printing
100-ton roller-bearing trucks and body mounted AccuMate couplers with screw-attached coupler pockets.
AccuMate couplers are made under license from AccuRail, Inc.
HO 85ft General American G85 Flatcar - Union Pacific #53030
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
HO GE P42DC - DCC & Sound - Amtrak/Phase IV #97
Detailed Information
AMTK FEATURES:
5-Chime forward facing horn
Antenna arrangement per road number
Front and rear marker lights
Amtrak approved artwork
By 1996, production of the P40DC was replaced by the P42DC. Amtrak took delivery of over 200 units and placed them in service to ultimately replace the aging and tired EMD F40 fleet. Horsepower was increased from 4000 to 4250. Many P40DCs were upgraded to P42DC standards by the late 2000s.
ROAD NUMBER SPECIFIC FEATURES:
#8
Phase IV repaint
large and small Sinclair antennas
original style nose
#24
Phase IV repaint
large and small Sinclair antennas
original style nose
#97
Phase IV repaint
large and small Sinclair antennas
original style nose
#203
New Special Operation Lifesaver paint scheme
various grouped antennas
bolted nose
P40DC/P42DC SERIES LOCOMOTIVE FEATURES:
Officially licensed product of Amtrak (Amtrak-painted units)
Officially licensed product of Via Rail Canada (Via painted units)
Officially licensed product of Operation Lifesaver (Operation Lifesaver-painted unit)
4 different nose variations: Amtrak as-built with strobes, Amtrak as-built without strobes, Amtrak rebuilt, and Via
Operating marker lights front and rear on Tsunami2 equipped models
Rear marker lights installed, but not connected on DCC Ready models
Newly-tooled lit number boards
Flashing strobe light and -Big-Hole- emergency light on equipped Amtrak units (Operational on DCC only)
Flashing ditch lights on non-strobe equipped Amtrak units synced with horn blow (Operational on DCC only)
Flexible rubber MU hoses
Flexible rubber trainline hose
Separately applied wire handrails
Exhaust stack
Photo etched metal radiator fan grille
Highly-detailed underframe including air tanks with air lines, air filter, and air dryer with two different types of rock shields
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting including operating ditch lights and red marker lights
Completely-redesigned die-cast frame for superior tractive effort
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Equipped with dual 28mm round speakers
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Burlington Northern #513922
Limited edition - one time run of these roadnumbers
Used to haul coal all across US
In service mid-1960s to mid-2000s
New die cast underframe
New sloped sheet braces
New updated brake gear
Correct 36 inch turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO EMD SD40-2 - DCC Ready - New York, Susquehanna & Western #3018
With these easy to use and affordable locomotives, you can digitally control speed, lighting, and direction!
-DCC equipped
-All-metal chassis
-5-pole motor
-Operating headlights
-E-Z Mate(TM) couplers
-Compatible with all NMRA-compliant DCC systems
-Performs best on 18 inch radius curves or greater
HO GMD SD40-3 - DCC & Sound - Canadian Pacific #5103
(Two Operating Beacons on the Roof)
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
Tru Color Paint - Acrylic - Vermont Red - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO EMD SW9 - DCC & Sound - Boston & Maine (B&M As Delivered) #1220
Boston & Maine:
Delivered in 1952
-Trash can- style spark arrestors
Deck mounted side handrails
Hood mounted number boards (road number specific)
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
OVR Exclusive - HO Bi-Level Auto Rack - Canadian National/TTGX #702404
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO RTR Thrall Rebuilt 40Ft Well Car - Trailer-Train (DTTX - Maroon Logo) #53045
(yellow, black; Large Maroon Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers, order now - limited quantity available
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
70-ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - GE Rail Services Corporation/ITLX #30023
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Prototypes in service from late 1980s to the present
- Separately molded and applied hopper gates
- Correct 36 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
HO Merchants Row VII - Kit
DIMENSIONS:
10-1/2 x 6-7/8 x 5-3/8 inches (26.6 x 15.5 x 13.6cm)
FEATURES:
- New Left-corner block with 3 different stores
- Modernized facades and entrances
- Fits late 1940s to the present
- Full-color 1950s-1960s vintage signs for different businesses
- Great addition to big city or small town business districts
- Separate back porch, downspouts and stairway
- Easily mix and match with other Merchants Row kits (each sold separately) to create a custom business district
- Molded in four colors and clear plastic
Conrail #4117
EMD SD80MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Models equipped with marker lights will be illuminated
Rubber MU hoses for durability
All New Tooling
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
See through steps
Illuminated ground lights
Front and Rear Illuminated Numberboards
Presenting EMDs 5,000HP 6-axle diesel in a whole new level of authenticity. Starting in 1995, EMD revived the 20 cylinder engine design, last seen in the SD45, and introduced the 5,000 HP SD80MAC. Athearn is pleased to announce this locomotive in Genesis 2.0.
CR FEATURES:
Illuminated front and rear red marker lights
Illuminated Ditchlights alternately flash per prototype w/ effect on DCC+Sound version
Four–panel dynamic intake per CR prototype
LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE:
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO LH Manual Turnout 19-1/4in Radius - 9-3/4in Long
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes.
Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation.
Suitable for all types of layouts, temporary or permanent, this modular track system features an integrally molded roadbed for realistic appearance.
Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
HO ET44 Tier 4 - DCC & Sound - CN Heritage/BC Rail #3115
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
1955-56 GMC 1/2 Ton Pickup - Unpainted and Resin Cast Kit
Evergreen Scale Models - Opaque White Polystyrene H-Column .188In x 14In (3 pcs pkg)
Greatland Sugar Refining - Kit
Buildings as shown measure:
Processing Plant: 9-1/8 x 6 x 7-1/2 in (22.8 x 15 x 18.7cm)
Warehouse: 8-3/4 x 3-1/2 x 4-1/2 in (21.8 x 8.7 x 11.2)
Boilerhouse: 4-1/2 x 2-3/4 x 2-3/8 in (11.2 x 6.8 x 5.9cm)
Easy-to-build plastic kit
Brick construction
Three separate buildings
Great for steam and classic diesel-era layouts
Perfect for use with gondolas, hoppers, covered hoppers, boxcars and tank cars
Realistic decal signs
Molded in appropriate colors
Required for completion:
Plastic glue
Modeling knife
Acrylic paint recommended
Spray Can - Pure Red (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 89ft Thrall Enclosed Tri-Level Auto Carrier - Norfolk Southern/ETTX Flat #33488/700392
Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these Walthers Proto models! Introduced in the mid-1970s especially to carry automobiles, the prototypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89ft flatcars with sidesill cut-outs and 28in wheels for added clearance. In service all across North America, the racks carry the owners logos, and most ride on flatcars leased from TTX with ETTX reporting marks.
A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
-Limited edition - one time run of these numbers!
-Prototypes in service from the 1970s to the present
-Factory-installed grab irons
-Separately molded and applied side ladders
-Ultra-smooth rolling metal axles with correct 28in wheels
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24in radius is recommended for operation.
PSC Transfer Van - Canadian National #76568
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
HO 45Ft Trailmobile Dry-Van Trailer - Smith Transport #58300
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
N Scale Flexi Flo Hopper (Late) - Penn Central (Billboard Repaint) - 6-pack
Road Numbers Include:
#897825
#897840
#897854
#897861
#897887
#897892
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
5/16 inch OD Round Aluminum Tube - 0.035inch Thick x 12inch Long
Round Aluminum Tube (1 pc)
Outside Diameter: 5/16 inch
HO 57Ft Mechanical Reefer - Burlington Northern (BNFE) #780398
Product Information
Move all kinds of perishable products on your HO railroad with WalthersMainline 57Ft Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s. Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including:
One time run of these roadnumbers, order now - limited quantity available
Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
Keystone or Hydra-Cushion underframe detail as appropriate
Short ladders and low hand brakes
9Ft Youngstown plug door with separate latch bars
Authentic Stanray peaked, ribbed roof with capped exhaust stack
Detailed underbody with brake gear and fuel tanks
70-ton roller bearing trucks
Correct 33Inch RP-25 turned-metal wheelsets
Proto MAX metal knuckle couplers
HO 68Ft Railgon Gondola - CSX Transportation #491497
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO - EMD GP35 - LokSound 5 DCC & Sound - Norfolk & Western #1319
Make one of EMD's most popular roadswitcher models part of your diesel fleet in minutes with the WalthersProto(R) GP35! This series has the thinner sidesills found on Phase I C/D production units and includes:
NEW - Phase I C/D side sill
NEW - Based on units built from 1963 to mid-1965 - many still in service
NEW - High-hood Norfolk & Western and Southern Railway models
NEW - Available with LokSound 5 Sound & DCC for DCC or DC layouts
One time run of these roadnumbers, order now - limited quantity available!
Road-specific details
See-through steps
See-through radiator and dynamic brake fans w/etched brass grilles
Nose-mounted lever-style handbrake
Front and Rear (as appropriate) class lights w/separate clear lenses
Photo-etched small metal lift rings
Detailed cab interior with crew figures
Five-pole, skew-wound, high-torque, high-efficiency can motor
Helical gears with 14:1 ratio for smooth, ultra-quiet running
LED constant & directional headlights
Easy multiple-unit operation
Correct size RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
For more information see the ESU Full Throttle Quick Start Guide available here.
Road-specific features of this model include:
NEW - High short hood
NEW - Southern-style MU receptacles
Brass Nathan M5 air horn
Brass firecracker radio antenna
Short hood forward operation
Hood-mounted walkway lights (nonworking)
4 jack pads
Front and rear MU hose boxes w/footboards
MU hoses and train air line
MU receptacles
Flat air filter hatch
Standard dynamic brake
Southern-style bell bracket and bell
Flat air filter
Extended range dynamic brake
Wind deflectors
Etched metal straight edge sunshades
AAR B 9'4" sideframes w/early covered roller bearings
2300-gallon standard fuel tank w/drain pipe
HO New Look Bus Denver TramWays
Destination Sign:
20-Fitzsimons
Detail Variations:
Left-side Emergency Door
4-window exit door
Early-style engine door
Standee Windows
60 ft NSC 5150 3-bay Covered Hopper - Union Pacific #90568
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. They have worn a wide range of colorful paint and lettering schemes over the years, 59ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59ft Cylindrical Hoppers feature:
Limited Edition - one time run of these roadnumbers!
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36In turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers
3/16 inch Diameter Round Brass Rod - 12inch Long
1 Piece
All Scale Tortoise Switch Machine Replacement Parts - Fulcrums (12 pkg)
Product Information
Replacement parts for Circuitron Tortoise Switch Machines make it easy for you to maintain your turnout motors in tip-top shape! Common parts available include Spring Wires, Retaining Screws, Fulcrums, Output Arms with attached contacts and Circuit Boards. See the entire line of Circuitron Tortoise Switch Machines and products.
HO AutoFlood III RD Coal Hopper - CEFX (6pk) #3
Includes the following numbers, all individually packaged:
#600600
#600612
#600626
#600644
#600568
#600673
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO Code 70 Nickel Silver DCC-Friendly #4 Turnout - Right Hand
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 70 rail! Combining great looks and great performance in a complete system, each item comes fully assembled and features:
- Matches 100-pound rail used on secondary main lines, branches, yard leads and sidings
- Narrow width ties molded in realistic dark brown with enhanced wood grain detail
- Fine profile molded spike and tie plate details on each tie
- Spike-mounting holes positioned next to the rail
- Molded starter points on underside of ties for Track Nails (948-86103, sold separately)
- Custom formulated nickel silver rail for outstanding electrical conductivity
9-pin to DCC Medium Plug - Short Harness (1 inch)
HO 1973 Peterbilt 359 Sleeper-Cab Tractor - Turquoise, White
This HO Scale 1973 Peterbilt 359 Sleeper-Cab Tractor by Brekina is based on the workhorse long-distance semi tractor of the 1970s and 1980s. This detailed model features an injection-molded plastic body with fine decoration, interior seats, window glazing and chrome-plated parts as appropriate.
HO 36ft Chemical Tank Car - Vulcan Chemical/GATX #33763
FEATURES:
- One-time run of these road numbers, order now, limited quantity available!
- Newly tooled tank with bolted jacket
- Perfect for steam- and diesel-era freight service
- Prototypes carried all types of chemicals between producers and end-users
- Small chemical/pressure dome
- See-through platform
- Correct 33 inch turned metal RP-25 wheelsets
- Proto MAX(TM) metal knuckle couplers
N Scale AutoFlood III RD Coal Hopper - CEFX #600527
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
Stainless Steel Hex Nuts 2-56 - 12 pcs.
HO 89Ft Bethlehem Flush-Deck Flatcar - TTX KTTX #960039
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers
HO Code 100 Curved Double Radius Turnout - Streamline- Left Hand, Electrofrog
Nominal radius - outside: 60In (1524mm), inside 30In (762mm); length: 10-5/32In (256mm).
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Black
Spray Can - JGSDF Olive Drab (100mL) TS-70
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Deluxe Gas Station Interior Detail Set (18)
Unfinished metal cast details to complete the look of your filling station interior. Floor jacks, tool chests, tires, air compressor, etc.
HO Union X-3 Tankcar - UTLX (1920s Paint) #33471
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
Spray Can - Dark Green (IJA) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
HO AutoFlood III RD Coal Hopper - GLFX #8035
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO GMD-1 - DC/Silent - Canadian National (1900s Noodle w/ Red Cab) #1907
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
1941-46 32Ft Fruehauf 32Ft Fruehauf Bekins Moving Van Resin Cast Kit
N Scale Single Track Straight Viaduct - 7-5/16inch (18.6cm) - 2pkg
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated.
Theres no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and youre ready to go.
HO ACF 2970 Covered Hopper - NAHX Corning #90401
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons, stirrup steps and brake wheel
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Screw-mounted express-type trucks
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
Iwata Eclipse - HP-BS Gravity Feed Dual Action Airbrush
FEATURES:
Spray Performance Category: All-Star Versatility
Series: Eclipse
Spray Scale: Fine to Wide
Optimal Working Pressure: 25 - 35 psi (0.17 - 0.24 Mpa)
Head System: E3 - Needle, Nozzle, Nozzle Cap
Nozzle Type: Compression Fit
Feed Style: Gravity
Paint Capacity: 0.05 oz (1.50 ml)
Action: Dual
Handle Type: Single Cut
Net Weight (lbs): 0.19
Net Weight (kg): 0.09
Assembled Dimensions (in): 0.67 x 5.71 x 2.05
Assembled Dimensions (mm): 17 x 145 x 52
Iwata Eclipse Series airbrushes are known for their versatility. Eclipses high flow allows it to atomize a wider variety of liquids with less need for reducing or thinning. Eclipse Series offers a broad spray range, as compared to other airbrushes, where it is possible to achieve a controlled fine line to controlled wide spray.
This airbrush has a 1.5 ml fluid cup and is ideal when using small amounts of spray medium!
The Eclipse Series feature an exclusive compression fit nozzle that is easy to clean and assemble. The quick flush cutaway handle allows easy access to the needle so that you can quickly empty the paint reservoir for cleaning. Iwatas spring-steel needle resists breakage and our needle packings are solvent resistant for longevity. Iwata Eclipse airbrushes come with a head cap spanner that is used to remove the head cap when accessing the nozzle. Also included is Iwata Lube, which is used to lubricate the needle and main lever mechanism. Hugely popular, Iwata Eclipse Series airbrushes offer all-star versatility!
Who sprays with All-Star Versatility? Makers and creators who...
- Spray with fine to wide level of detail and scale
- Want the ease of a drop-in nozzle
- Have beginner to high-level airbrush skills
- Use thin to thicker viscosity or pearlized spray materials
- Are hobbyist or professional painters
- Want to spray many types of things using one airbrush!
HO FM H16-44, Standard DC, Canadian National: Wet Noodle Scheme No.2205
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO Lightweight Coach - Erie Lackawanna #1323
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
Talus - Coarse Buff (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings, and/or road cuts. Intermix grades and blend shades for the most realism. Color natural talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle talus and secure with scenic cement (#191).
Particle size - Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
Athearn - HO RTR PS-2 2600 Covered Hopper - Baltimore & Ohio - #600401
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
HO Double-Track Railroad Bridge Stone Pier - Resin Casting
DIMENSIONS:
Approximately 5-3/4 x 1-3/16 x 5-3/16 inches
FEATURES:
- Common prototype design used with various types of bridges
- Fits steam, diesel and modern-eras
- Highly detailed parts
- Use with Cornerstone double-track bridges
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0014
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO F89F Trailer w/40ft Trailer - TTX/Yellow #153958, The Rock Trailer
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast underframe
- Wire formed brake plumbing
- Detailed deck
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Minimum radius: 22 inches
- Recommended radius: 24 inches
40FT Z-VAN REEFER TRAILER MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- Wheeled or shoe-style landing gear per prototype
- 2 or 4 door rods per prototype
- Fully-assembled and ready to use out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
HO USRA Single-Sheathed Boxcar: Maine Central
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Highway Tractor Stripes & Flames - Decals
Circa: 1950-80
Scale: HO Scale
Equipment Type: Striping - Flames
Description: Highway Tractor Stripes & Flames - Waterslide Decal - HO Scale
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SECX #2305
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO NSC 64 Ft 6000 Cubic Gondola HS - IMRX (6 pkg) #1
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Includes Road Numbers:
2283
2288
2298
2300
2317
2343
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO Code 100 Remote Control Snap-Switch(R) - Left Turnout
This Atlas HO Scale Code 100 Snap-Switch Turnout features Code 100 nickel-silver rail with black molded-plastic ties and a plastic frog. The turnout comes equipped with an attached remote controlled, above-benchwork electric switch machine. The switch machine can be thrown with a Switch Control Box, 150-56 (sold separately). The 18 inch radius turnout also includes a 1/3 18 inch radius curve compensator track so for planning it equals one 18 inch curved section. The Snap-Switch turnout can also be thrown manually using the small sliding lever on the turnout. The track geometry of Code 100 track matches that of Code 83 Snap Track, so Code 100 track can be substituted for Code 83 in various Snap Track track plans when using adaptor track joiners (sold separately).
72Ft Centerbeam Flatcar with Standard Beam - Ready to Run - Southern #601070
Product Information
Shipping lumber by train is easy for your HO railroad with a fleet of WaltherMainline 72Ft Centerbeam Flatcars on the job! Designed to speed loading and unloading, these bigger cars entered service in the 1980s and quickly became a favorite with shippers and customers. These nicely detailed models are based on earlier cars built with oval cut-outs (popularly known as -opera windows-) on the centerbeam to reduce overall weight, which are still in service with a wide range of railroads and lumber producers. Other features include:
Limited edition - one time run of these roadnumbers!
Heavy die-cast metal underframe for excellent tracking
Correct 36In turned metal wheelsets
Proto MA metal knuckle couplers
HO Ice-Cream Vendors & People (6)
HO GP18 - DCC & Sound - Lehigh Valley #302
Detailed Information
LV FEATURES:
Nathan 3-chime horn
Dynamic brakes
Winterization hatch
Forward facing fuel tank
Pilot mounted footboards
One of the anthracite roads of the northeast U.S., Lehigh Valley bought four GP18s (built in mid-1960) numbered 302-305. The units served throughout the 1960s and into the mid-1970s. Lehigh Valley was folded into the U.S. governments bailout of Penn Central and became a founding member of Conrail in 1976. The collection of four GP18s went on from Lehigh Valley to serve Conrail as 7496-7499. The units initially wore patched out Lehigh Valley dress with -CR- markings and all eventually saw repainting into Conrail blue. Among the four GP18s, 304 was rebuilt with a chopped nose during the time it worked for Lehigh Valley; the other three retained high short hoods.
ROAD NUMBER SPECIFIC FEATURES:
#302
1964 era Tuscan red scheme
#303
1964 era Tuscan red scheme
#305
1971 era Cornell Red scheme with large letters and barrier stripes. Modified -cut- conductors side skirt
Long hood mounted paper air filter box
Flat-top dynamic brake fan
GP18 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Accurately-painted and printed paint schemes
Body-mounted McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO F30A MOW Camp Trailer: Painted, Unlettered Sleeper Trailer
This trailer does not come with a flatcar
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - KRRX #4719
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
1:87 Cat D5 Dozer with Fine Grading Undercarriage and Foldable Blade
Product Dimensions: 3 x 1.5x 1.5 in.
Features and Details:
Authentic Cat Machine Yellow paint
Authentic Cat trade dress
Detailed interior
Movable and foldable front blade
Rear ripper raises and lowers
Movable tracks
High Line Series Packaging:
Collectible, full-color printed metal box, including machine photos and specifications. Die-cut foam insert protects model within the box. Cardboard outer box provides additional protection.
HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) #745324
1935+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO Scenic Accent Figures - Roofers (6 pkg)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism.
0.012 inch Thick Stainless Steel Flat Strip - 3/4inch x 12inch
Stainless Steel Flat Strip 12inch Long (1 pc)
HO Penn Central - PC-Hood & Cab Unit Diesels - Decals
N scale Track Assortment - Set B
Straight Sections - 4 Each:
1-1/2 inch (38mm)
1-5/16 inch (33mm)
Spray Can - Semi Gloss Clear (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO AutoFlood III RD Coal Hopper - CEFX #600612
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO GE 44 Tonner Phase Ic Body - DC/DCC Ready - Generic Industrial: Yellow
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
PRR X31A Double-Door Boxcar: Circle Keystone - Single Car #69245
Detail Variations:
Built 1934-35, as operated to approx. 1954.
6-pack includes the following numbers:
#69024
#69172
#69245
#69312
#69375
#69434
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
SmokeBox Graphics Buffalo Creek ACF 40in Boxcars
Decal set covers both orders of ACF 10in-5in IH boxcars (1953 welded side and 1956 riveted side). Each package includes two of the decal artwork shown on the instruction sheet and will complete up to two cars
UTLX #910201
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Highly detailed, injection-molded body
Three different body phases: early, flat panel, and late
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports and tank saddles
Photo etched metal walkways and end platforms
Wire safety rails and end handrails
Printed placards
Three different road numbers
Minimum radius: 18In
Recommended radius: 22In
GENESIS FREIGHT CAR FEATURES:
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Full underframe detail featuring body mounted brakes or truck mounted brakes as per prototype
100 ton trucks with animated rotating bearing caps
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted, McHenry scale double-shelf knuckle couplers
Multiple road numbers, unique numbers between singles and 3-packs
N Scale 33 Inch Metal wheel Set - 8/pkg
HO Trinity 3-Bay Hopper - AGPX (3pk) #2
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO GP40 - Silver DCC Ready - CP Rail #4611
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Atlas Master Series Silver Additional Features:
NMRA 8-pin plug for DCC (Decoder-ready)
HO 40Ft Fruehauf Fluted Side Volume Van - Southern Pacific #A-5651-RT
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
Scene Master Heavy-Duty Container Crane - Kit
Product Information
Serve smaller HO intermodal terminals with the new heavy-duty container crane kit from SceneMaster! Similar cranes fitted with container lifting equipment can be found dockside at many ports, and are often called on to handle heavier boxes at bigger facilities. Features of this detailed kit include:
Typical of specially-equipped cranes in use from the 1990s to the present
Detailed cab interior, lattice boom, crawler drive and more
Molded in yellow, gray, black and white plastic
Illustrated step-by-step instructions
Detail in minutes with SceneMaster 20ft and 40ft Containers, available separately
N Scale 48Ft Ribbed Side Container - Genstar
(White & Blue)
Product Information
Modernize your HO intermodal operations in minutes with these SceneMaster Containers, featuring:
Improved door latch detail
Great detail for terminals and industrial scenes
Realistic loads for any well car
Ready to use
HO 60ft NSC 5150 3-Bay Covered Hopper - Archer-Daniels-Midland (ADMX) #52293
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Hot Wire Foam Cutter
The Hot Wire Foam Cutter makes clean, precise cuts, adjusts for angled cuts and cuts a path 4-1/2 inches wide x 6 inches deep. Cutter heats instantly and leaves no mess!
Use straight-rod option to cut in tight places and for faster cuts. Straight-rod cuts a path 3-1/2 x 6 inches.
The hot wire Foam cutter attachment: Bow & Guide (purchased separately) adds versatility to the hot wire foam cutter. Attach the guide for precise angle cuts.
Only use the nichrome replacement wire. To avoid the emission of toxic fumes, we recommend using the hot Wire foam cutter and the bow & guide on Woodland Scenics foam products only.
Flat Brushable Acrylic - Roof Brown - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
N Scale 1960s-1970s Hillman Imp - Assembled -- Willow Green
Peco Code 83 SL 8377 Streamline #7 Insulfrog Turnout - Nickel Silver Left Hand Curved HO Scale Track
Shipped from Ontario Canada
RTR 57Ft trinity 3-unit Spine Car - TTRX #361044
Expected time of arrival : April 2021
MODEL FEATURES:
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Precision die-cast metal spine structure
Etched metal walkways
Separately applied brake piping
Highly detailed customer applied trailer hitches
53Ft trailer and container are perfect loads for the 57Ft spine car
Fine ladder detail
Weighted for optimal performance
33Inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers installed
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Machined metal wheels
Minimum radius: 20Inch
PROTOTYPE AND BACKGROUND INFO:
Intermodal transportation requires specialized rail equipment which is, on occasion, too specialized. To allow more flexibility in loading containers and trailers at terminals all-purpose spine cars were developed. These cars can be configured to allow loading of trailers of varying lengths, from 28Ft pups to 53Ft high capacity units. With the trailer hitches collapsed containers can also be loaded. 40Ft, 45Ft 48Ft and 53Ft containers call all be accommodated on these cars as well as 20Ft models provided they are mounted to a chassis.
The prototype for our model is based on a Trinity-built car owned by the TTX Company. These 70-ton cars (TTX class RAF30A) numbered TTRX 360817-361116 first appeared on the rails in the late 1990s. The Athearn model is faithful to the prototype allowing modelers to load a variety of trailers and containers.
Specifications
PROTOTYPE MANUFACTURER: Trinity
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990s+
HO Flexible Self-Adhesive Paved Roadway - Cobblestone (Red)
39-3/8 x 2-5/8in
(1m x 66mm)
Pave HO Scale roads, streets and highways quickly and easily with Walthers SceneMaster Flexible Self-Adhesive Paved Roadway sets! Made from a unique flexible material that is self-adhesive, simply combine straight sections, and curves, or cut to fit and press in place. Each features a realistic surface color, as well as appropriately colored centerlines and fog lines along the outside edge of the pavement for modern or vintage paved roadways.
-Model North American roads in minutes
-Realistic surface color with correct striping for US roads in various eras
-Ready to use, self adhesive and flexible - easy to add to new or existing scenery
-Mix and match with other Roadway sections, each sold separately
HO SD60M Tri-Clops - DCC Ready - Hudson Bay Railway HBRY #6001
Detailed Information
HBRY FEATURES:
Ex-UP
Illuminated front number boards
Front ditch lights
Late notched nose
The Hudson Bay Railway is a Canadian short line formed in 1997 operating between Saskatchewan and Manitoba. It operates over 810 miles of former CN trackage. Recently, HBRY have been upgrading their locomotive fleet with ex UP SD60Ms painted into this beautiful blue and grey scheme.
ROAD NUMBER SPECIFIC FEATURES:
#6001
PTC antenna array
large UP plow
#6007
Firecracker antenna
large EMD plow
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
EMD HTC trucks with animated bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Accurately painted and printed paint schemes
Packaging securely holds for the model for safe storage
Minimum radius: 18inch Recommended radius 22inch
Drill Bit #76 - 0.020inch Diameter (2 pkg)
Product Information
Walthers Drill Bits are the right tools for all kinds of hobby projects, from detailing locomotives and cars, to scratchbuilding, wiring and more. Theres a full range of common wire gauge - jewelers drill bit sizes from number 80 to 43, and each pack includes two ready-to-use bits. Walthers miniature hardware is a complete range of ready-to-use parts and tools for hobby projects, including wood, machine and nylon insulating screws, plus appropriate hex nuts and washers, in assorted standard sizes (machine and wood screws may be brass or brass plated). Drill Bits are part of the line of Walthers miniature hardware and tools.
HO GE 44 Tonner Phase Ic - DC/DCC/Sound - Milwaukee Road #991
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
HO Bathtub Gondola w/Load - EAMX 3pk Set #3
ERA: 1979+
MODEL FEATURES:
-Separately applied grab irons, end ladders, and brake wheel
-Weighted for trouble free operation
-Roller bearing trucks with 36in machined metal wheels and RP25 contours operate on all popular brands of track
-Body mounted McHenry operating scale knuckle couplers
-Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
-Replacement parts available
-Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
With the advent of rotary dumpers, the bathtub gondola allowed the railroads to haul more bulk cargo per carload than conventional open top hoppers. The absence of unloading gates and other appliances that affect internal capacity allowed for additional capacity per car. This improved transportation efficiency for these assigned service cars. The term Bathtub gondola is due to the internal shape of the car.
HO GMD SD40-2 - DCC & Sound - Ontario Northland #1733
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO GP9 w/DCC & Sound - Union Pacific #341
ERA: Late 1950s & Early 1960s
UP FEATURES:
-Phase III Cab Unit- First time in Genesis
-Dynamic brakes
-Underframe mounted bell
-Phase I B-units
-Winterization hatch
UPs Phase III GP9s began service on the UP in 1957 lasting into the 1970s. While the majority of these 300 class units were modified significantly there were 5 that survived in their as-built configuration all the way up until retirement. We are offering 3 of them in this production run. Note that they could be seen in service with the UPs Veranda style Turbines.
UPs fleet of 75 Phase I GP9B units were built in in the Spring of 1954 and remained in service until the mid-1970s. These ubiquitous units could be seen in service system wide on mainline freights as well as branch line locals. They could also be seen with in service assisting Veranda Turbines.
LOCOMOTIVE FEATURES:
-Trainline and MU hoses
-Coupler cut levers
-Drop steps unless noted
-MU stands
-Nub style walkway tread
-Bell placement & type per prototype
-Fine-scale handrails for scale appearance
-Wire grab irons
-Lift rings
-Windshield wipers
-See-through cab windows and full cab interior
-Etched metal radiator intake grilles and fan grilles
-Air tanks mounted below sill unless noted
-Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
-Blomberg-B trucks with appropriate bearing caps
-Sander lines
-Speed recorder unless noted
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately-painted and printed paint schemes
-Body-mounted McHenry operating scale knuckle couplers
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
-All-wheel drive with precision gears for smooth and quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-Bidirectional constant LED lighting so headlight brightness remains constant
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds the model for safe storage
-Replacement parts available
-Minimum radius: 18in
SOUND EQUPPED MODELS ALSO FEATURE
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
HO EMD FT A+B Set - DC/DCC/Sound - Northern Pacific (NP Pine Tree Scheme) #5409D + 5409C
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
N Scale Hot Air Balloon - Kit
DIMENSIONS:
9.7cm Diameter, 13.5cm Tall
Extension Cable, Plug - Socket, Length: 48 inches (5pk)
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
The Walthers Layout Control System Extension Cable features:
- Easily extend connections to Controllers or Power Distribution Block
- Pack of five cables, each 48 inches (1.2m) long
- Fully assembled with servo style connectors
HO Bi-Level Auto Rack - Conrail/TTGX Flat Car #604132
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO CP Rail - Passenger Cars (1969-1978) - Waterslide Decals
5/8 inch Open Web Truss - Warren Style (1pc)
Excellent for towers and booms. Also good for roof trusses, bridges, conveyors, and space frames. Tee flange on one edge only allows easy registered assembly for triangular and square sections as pictured at left. Protruding side of flange may be removed if desired. Precision Injection Molded in Dark Gray ABS Plastic.
Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
5/8
HEIGHT IN MM
15.9mm
WIDTH IN INCHES
1-3/32
WIDTH IN MM
27.8mm
THICKNESS IN INCHES
11/64
THICKNESSS IN MM
4.4mm
LENGTH IN INCHES
11
LENGTH IN MM
275mm
N Utility System - Substation - Built-up
Product Information
Complete the Woodland Scenics N Scale Utility System with the Substation to accurately model power distribution. Use Single Crossbar Pre-Wired Poles to simulate the power connection from this hand-painted, detailed structure to every building on a layout. Features include insulators, cables, a circuit breaker and a detached control building. Pair with Chain Link Fence (sold separately) for further realism. Check out the entire Woodland Scenics N Scale Utility System.
HO 53Ft Gunderson Husky-Stack Well Car & Containers - Arkansas & Oklahoma AOK #73609
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
HO Scenics Accents - Dock Workers (6pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail!
Includes six dock workers, two crates, and one pallet. One dock worker is holding up his hand to signify stopping an operation. One is opening a crate, one is dragging a pallet, two are carrying a crate and another is looking up, surveying a project.
HO RTR SD40T-2 - DCC & Sound - D&RGW Rio Grande #5344
DRGW FEATURES:
81inch nose
Functioning nose light
Sinclair Antenna
Correct sized fuel tank
See-through lower air intakes
Snow plow
Ratchet style brake
Dual fuel fillers
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Separately applied air tanks
See through cab windows
Welded ECAFB
Photoetch windshield wipers
LED Lighting
HTC truck sideframes
All-wheel electrical pickup
See-through dynamic brake fans
-Mushroom- nose vent on right side
Separately applied wire grab irons
Fully assembled and ready-to-run
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox speific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body
Painted and printed for realistic decoration
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for troublefree operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Replacement parts available including motor brushes
Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard Econami Sound by SoundTraxx
Sound units operate in both DC and DCC
Sound units operate in both DC and DCC
All functions NMRA compatible in DCC mode
Full DCC functions available when operated in DCC mode
Some functions are limited in DC
Engine, horn, and bell sounds work in DC
Slow speed control
All functions NMRA compatible in DCC mode
CV chart included in the box
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO 45Ft Trailmobile Dry-Van Trailer w/Side Door - CP Rail #282100
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
HO Scenic Accents - Carpenter Crew - Scenic Accents(R)
Light Diffusing Window Film - Just Plug Lighting System
216 Square Inches 1394 Square Centimeters
Diffuses light evenly throughout when lights are on and eliminates the need for a building interior. Blocks the outside view through the windows of an empty building, while still allowing light to shine through the windows from the inside. Use the optional Window Tint together with Diffusing Film to make windows appear dark when lights are off. Material is easy to apply and Tint and Film will each cover approximately 216 square inches (13.9 sq dm) of window space.
Rapido 753111 - HO New Look Bus - GO Transit (Toronto) Late - York Mills Subway via Yorkdale - Deluxe #1050
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
HO NSC 5304 Boxcar - Canadian National (Delivery w/ Green Door) #557537
The Rapido NSC 5304 cu.ft. CN Combo Door Boxcar features:
Separate grab irons installed at the factory
100-ton Barber S-2 trucks, with metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe
HO 50ft PS 5277 Cu.Ft. Exterior Post Boxcar - Rock Island #302115
FEATURES:
- Laser Sharp Painting and Printing
- 33 inch InterMountain Precision Metal Wheelsets
- Kadee #178 Metal Knuckle Couplers
Date: NEW 8-79
Minimum Radius - 22 inches
HO Enterprise 2-Bay Covered Hopper - Penn Central PC #881559
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO TTC G-Class Subway - DC/DCC/Sound - A-B Train #1 #5034+5035 (1 Married Pair-2 cars)
Available as:
Gorgeous display model of a two-car train in St. Clair Station, OR
Four-car, operating model (silent or equipped with SOUND), OR
Two-car, operating add-on model (silent or equipped with SOUND)
Each Rapido Toronto Subway Car features:
Design created from original factory drawings and field measurements
Fully detailed interiors including seats, hand holds and lighting
Working lights: headlights, rear marker lights, destination sign
Fully detailed underbodies
Wire grab irons
DC/DCC ready or DCC/Sound (Display models are unpowered)
Display models include lighting powered by an included 12V DC power supply
Ages 14 and up. This is not a toy.
GP39-2 Diesel, DCC & Sound - Delaware & Hudson #7401
ETA: October 2021
Detailed Information
DH FEATURES:
Reading style cab roof rain gutter
2900 gallon fuel tank.
Cab wind deflectors
Ratchet style hand brake.
Ditch lights on 7401 & 7407
Electrical cabinet door on engineers side
These ex-Reading units were conveyed to to D&H when Conrail was formed in 1976. They were badly needed since D&H had doubled in size. Consequently they were patched quickly. Some eventually received full D&H paint when they were rebuilt.
ROAD NUMBER SPECIFIC FEATURES:
Unit was part of small group of D&H GP39-2s that were rebuilt in 1989. In the process they received full D&H paint jobs and ditch lights.
LOCOMOTIVE FEATURES:
All units are powered
Heavy die-cast frame for greater traction and more pulling power
DCC-ready features Quick Plug plug-and-play technology with both 21-pin connector (DCC-Ready only)
Factory installed SoundTraxx Tsunami2 sound and DCC decoder (DCC+sound units only)
Tsunami sounds are compatible with both DCC and DC operation (DCC+sound units only)
Genesis driveline with balanced five pole skew wound motor and dual flywheels
Directional constant lighting-featuring LEDs; headlight brightness remains constant
Scaled from prototype resources including drawings, field measurements, photographs, and more
Separately applied photo etched metal and injection molded detail parts:
Cab interior
Coupler cut levers
MU and Trainline hoses
Windshield wipers
Lift rings
Wire grab irons Sander lines
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body mounted McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Detailed Blomberg-B trucks with prototype-specific wheel bearings
Replacement parts available
Minimum radius: 18inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 decoder pre-installed
Sound units operate in both DC and DCC
Individual sound boards installed in both A and B units (sound units only)
All functions NMRA compatible in DCC mode
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Slow speed control
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Lighting effects such as beacons and Gyralight where prototypically accurate
A and B units often include sound decoders with different default pitch shift, so MU lashups sound unique
PROTOTYPE SPECIFIC INFORMATION
In the decade between 1974 and 1984, EMD produced the GP39-2 for seven North American railroads. The basic design followed most four axle road diesel switchers for the time. Borrowing improvements from the GP38-2 and GP40-2 designs, this mid-horsepower road switcher utilized a turbocharged 12-cylinder EMD 645E3 diesel engine for its prime mover. With 4 fewer cylinders, the smaller engine provided a distinctive long hood on the phase II and phase III bodies, where the clean room/engine compartment doors were set back from the cab further than predecessor locomotives.
Sensitivity to fuel economy in the 1970s justified the GP39-2 in the locomotive market. It also laid the ground work for EMD to start exploring locomotive designs that utilize engines with larger piston displacement yet possess fewer cylinders. This approach has become the foundation to modern locomotive technology.
Juneco Scale Models Round Shovel - Spade (4/pkg)
HO EMD SD7 - DC/Silent - Bessemer & Lake Erie #454
Bessemer & Lake Erie
- Unique -B&LE- style sand fill door hatches
- Long hood forward operation
- Extra large pilot step and corresponding additional stepwell step (First time done on a plastic model!)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO ESU V5 21-Pin Sound Decoder for Royal Hudson
An ESU LokSound version 5.0 decoder loaded with Rapidos own sound recordings!
Detail Variations:
- ESU LokSound version 5.0
- Recorded from prototype equipment
- Easy-to-install 21-pin chip
NOTE: No speaker is included!!
HO 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - GE Rail Services Corporation/ITLX #30194
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Prototypes in service from late 1980s to the present
- Separately molded and applied hopper gates
- Correct 36 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
HO TM High-Cube Container - ESIU, Set #2
Contains Numbers: 10007, 10012, 10023, 10045
MASTER MODEL FEATURES:
Prototypical paint schemes
Simulated forklift pockets
Detailed chain securement
Fire port on one side
HO Single BiLevel Commuter Car - Undecorated Coach - Series 2 Body
Note: Unnumbered coaches do not include decals. Decals are available from Highball Graphics.
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO AutoFlood III RD Coal Hopper - PGNX #1125
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO 45ft Smooth Side Trailer - Red
MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- Red and white conspicuity stripes
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - IWXX (Hunter Green) #220057
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
G (1:24) ABS Stair Rail (1pc)
Use for hand rails on stairways. Precision Injection Molded in Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
Tip: ABS Stair Rails may be curved to fit circular application by softening them in warm water or heating with a hair dryer. Stairs may be modified to fit the circumference of a tank or other curved surface by cutting off the stair stringer from the side to be cemented. Tape the stair in place. Attach each stair step separately
SCALE
G
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1-3/4In
HEIGHT IN MM
44.5mm
WIDTH IN INCHES
3In
WIDTH IN MM
76.2mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
24In
LENGTH IN MM
600mm
Cast Resin Freight Car Load - 120-Ton Ships Driveshaft Bearing - 6-1/4 Inches Long
New Freight Car Loads From Chooch!!
Ready-to-use freight car loads are just the thing for adding realism to your layout scenes and freight car fleet. Chooch cast-resin loads are patterned after typical industrial machinery and appliances shipped by rail. Each comes completely decorated for added authenticity. These new loads are available in multiple sizes; large loads are usable in HO, S, and O Scales, small loads are good for HO and N freight cars and scenes. Mid-sized pieces are ideal for HO, but some may be suitable for larger or smaller scales.
Trinity 3230 Covered Hopper - Chicago Freight Car #3104
FEATURES:
All new tooling
Ready to run
Injection molded plastic
Fine scale detail
Separately applied wire grab irons
Separately applied wire cut levers
Etched metal roofwalks
Crisp painting and printing
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) (6pkg) #1
Road Numbers Included: 286280, 286307, 286320, 286346, 286365, 286401
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Red
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
4785 PS2-CD Covered Hopper - Early End Frame - New York Central 138-H #886953
HO SD9043MAC - DCC Ready - Union Pacific #8037
ETA: October 2023
Detailed Information
UP FEATURES:
Leslie 3-chime horn
Large EMD plow
Front ditch lights
During the horsepower race of the 1990s, EMD offered an -upgradable- SD90MAC. EMDs 6000hp 256H prime mover was still being tested for reliability and issues at the time and UP needed power quickly. To combat this, EMD offered the SD90 with the 4300hp 710 prime mover in its place until the 256H prime mover was ready to be installed after successful testing. Unfortunately, the 256H was deemed too problematic and the conversion was never completed. UP classed these as SD9043MACs. Purchased in 1996, these big brutes were initially used in coal drag service before ultimately being used in other types of service. They were factory delivered with the -We Will Deliver- slogan. By the mid 2010s, a large batch were sold to NS for rebuilding into SD70ACUs.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights
Illuminated number boards
Etched, see-through walkway steps
Dual Sugarcube speakers for optimal sound quality
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined
flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field
measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
HO 1937 AAR 40Ft Boxcar - CP5/5 Ends - Canadian Pacific (Spans the World) #226741
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Foliage Clusters - Medium Green (50.8 in3)
Model bushes, hedges, shrubs, trees, and other high ground cover, and use on hillsides to model tree masses.
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Gulf Oil (Repaint) #5078
Built: 11-35
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
Sterling Salt #49044
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
The Rapido HO Scale F7B and F9B feature:
Designed from original GMD blueprints and field measurements
The only 100% accurate GMD-built F7B and F9B locomotives – This is not a stand-in
Road-number and era-specific details applied at the factory
Steam generator or no steam generator panel as appropriate
Correct bodyside grilles as appropriate
Correct end details including unique CN steam generator end louvers
Backup light in correct location for CN or CP
Unmatched underbody details including air piping
Operational backup light (DCC)
Drive system designed for silky-smooth slow-speed operation
Metal Macdonald-Cartier Knuckle Couplers
DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings
Several road numbers per paint scheme
HO SD60 - DCC/Sound - SOO Line #6049
MODEL FEATURES:
Locomotives come with railroad-specific details including: Operating beacon (in DCC/Sound version), horn, winterized hatch, antenna, handrails, etc.
SPECIFICATIONS:
DCC: Equipped with Econami2
PROTOTYPE MANUFACTURER: EMD
Axles: 6
LIGHTED: LED Lighting
PROTOTYPE AND BACKGROUND INFO:
In 1984, Electro-Motive (EMD) introduced the 60 series locomotive. These had many improvements over the earlier models including features such as: New and improved EMD 710 power plant producing 3600 HP, wheel slip control, computerized cabinet replacing the older and unreliable components.
This design spawned into many other upgrades within its class like the modernized wide cab, Isolated cab, and even the start of AC traction technology.
These locomotives were suited for just about any mainline service that could be thrown at them. The model was fairly popular with class one railroads, with Norfolk Southern purchasing the most at 151 units. Most of them are still in service today. Norfolk Southern in 2010 started a large full rebuild program of their SD60s (including purchasing cores from other sources) into SD60Es, which rebuilt them from the frame up with new electrical components and a newly designed cab to improve visibility and forward crash impact safety.
Acrylic Flat Colors - Sea Blue - 3/4oz (23mL) Bottle
XF-17
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
Z/N/HO Scale 1 Amp Scale Decoder with 6 Pin NEM 651 type plug
- Size: .36 x .42 x .13 inch
(9.05mm x 10.61mm x 2.67mm)
- Z/N/HO Scale
- 1.0 Amp/1.5 Amps Peak
- 2 FX3 Functions, 0.5 Amp with 6 Pin NEM 651 type plug
- FX3 Function outputs for prototypical lighting effects and on/off control:
- Constant Brightness Lighting with directional or independent control.
- Optimized selectable LED or incandescent lamp operation
- Realistic Effects like Ditch lights, Mars lights, strobes, and many more
- Configurable Pulse Function available on all function outputs.
- FX3 & Standard Function Qualifiers operate functions based on direction,
- F0 on or off, direction and F0, and whether loco is moving.
- Function Mapping for custom function setup.
- Master Light Switch turns off all lights & functions with one keystroke.
- Advanced Consist Function Controls.
- Digitrax LocoMotion System - Your locomotives look like the real thing.
- The Digitrax LocoMotion System makes them run like the real thing, too!
- Scaleable Speed Stabilization (Back EMF) with simple setup & 256 level resolution.
- Torque Compensation.
- 128 Speed Step operation (14 or 28 steps can also be used).
- Momentum with acceleration and deceleration.
- Normal Direction of Travel is user selectable.
- Switching Speed feature for easier and faster access to yard speeds.
- 3 Step Speed Tables set start, mid and max voltage for custom control.
- 28 Step Speed Tables with 256 level resolution for precise control.
- Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.
- 2 Digit and 4 Digit Addressing.
- Basic, Advanced & Universal Consisting.
- SuperSonic motor drive for silent operation.
- Direct mode programming.
- Decoder Reset CV with or without speed table reset.
- Transponder Equipped ready for transponding on your Layout.
- Motor Isolation Protection helps prevent damage to your decoder.
- Automatic Analog Mode Conversion when running on DC layout.
- Decoder Lock for individual programming of multiple decoders in one loco.
HO Vancouver Iron Works Piggyback Flatcar - Canadian National (6 pkg) #2
Includes Road Numbers:
688102, 688105, 688109, 688123, 688127, 688163
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
N Scale Just Plug Built-&-Ready - Carvers Butcher Shoppe
Every town has a local butcher to supply the finest cuts around, and N scale Carvers Butcher Shoppe only offers the best. This building is hand-painted with authentic weathering, including peeling paint and worn cedar shake shingles on the roof. The interior features a 3D meat counter with a selection of the freshest delicacies. If you peek into the windows of the loading dock door, you will see a variety of meats hanging for the best flavor and tenderness. Additional features include loads of signage, stairs, a water hose, and an entryway porch.
The structure also comes with pre-installed LED lighting made for use with the Just Plug Lighting System.
30mA RoHS Compliant.
Built-&-Ready structures are hand-painted, highly detailed ready-to-place buildings that include decals and window treatments.
N Scale 40Ft Standard Height Container - United Arab Shipping Co (UACU) Set #1 (2pkg)
FEATURES:
Separately applied door rods and handles
Optional separate vents
Prototypically accurate -beveled- all corrugated sides
Each set comes as a 2-pack
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #00033
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .060In x 6In x 12In (1 pc pkg)
HO 50Ft FMC 5283 DD Boxcar - Canadian National #555156
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Positionable sliding double doors
Body-mounted McHenry operating scale knuckle couplers
Painted and printed for realistic decoration
Precision machined metal wheels
Highly-detailed, injection molded body
Weighted for optimum performance
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
HO Alco RS-3 - DCC & Sound - Chesapeake & Ohio as delivered - #5601
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. DCC/Sound version features LokSound V5 decoder.
Rock Mold - Classic Rock
Make rocks for riverbanks, road embankments or anywhere you want an outcropping of large rocks.
The mold is flexible and reusable.
Rocks range in size from smallest: 3/4 L x 5/8 W x 1/4 H inch to largest: 5 5/8 L x 2 5/8 W x 2 5/8 H inch.
HO F30A 50Ft Flat Car w/Sleeper Van - Conrail (CR MOW) #62089
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
Rapidos F30 Camp Cars Feature
All-new camp trailer loads in four styles
End railings and platforms
Photetched details
Multiple car numbers per scheme
HO Code 83 Nickel Silver DCC-Friendly #8 Turnout - Left Hand
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 83 rail!
Combining great looks and great performance in a complete system, each item comes fully assembled and features:
-Thin profile ties in realistic dark brown with enhanced wood grain detail
-Fine profile molded spike and tie plate details on each tie
-Spike-mounting holes positioned next to the rail
-Molded starter points on underside of ties for fasteners
-Custom formulated nickel silver rail for outstanding electrical conductivity
In addition to these details, each DCC-friendly Code 83 Turnout features:
-Snap-action points
-Solid rail points for better conductivity
-Isolated frogs with built-in jumper for powering as desired
-Current jumpers entering and leaving the frogs
-Insulated tie bar
HO 60ft Bulkhead Flatcar - PGE #16021
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
HO 5820 Covered Hopper - Procor/UNPX (No Procor Logo) #123590
Era: 1988+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
Tall Steel Viaduct Length Extension - 60Ft - Note picture in the middle is this kit
Tall steel viaducts are some of the most spectacular and interesting types of bridges. They are used by railroads to span wide and/or steep valleys, often replacing wooden trestles. These HO and HOn3 Tall Steel Viaducts are available in three base kits, three length extension kits, a height extension kit which adds a 4th and 5th story, and a tower kit. The various kits allow you to design and build your own custom bridge of any length from one to five stories high, with full towers or bents, and straight or curved. A 10-page instruction sheet with over 35 photos and illustrations is included. These bridges are beautifully detailed and are often the centerpiece structure on modelers layouts.
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x3) .011In x .033In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 1 X 3 LUMBER SIZE IN HO SCALE
HO - Air Horns (Unpainted Brass Casting) - Leslie S-5TRPO; 3 Forward and 2 Back
5/32In Fluorescent Blue Rod (5pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
BLUE
HEIGHT IN INCHES
5/32In
HEIGHT IN MM
4.0mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
HO Duplex Sleeper - CNR - 1954 Scheme #1115 / Edmundston
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
Van Hool CX45 MotorCoach: New Facade - ABC Van Hool (Gray)
Diecast metal
Limited edition!
HO 37ft General American Meat Reefer - Oscar Mayer (Largo Logo) #66052
Rapidos 37ft Meat Reefers Feature:
- Complete underbody with all piping
- Super-detailed Barber S-1 trucks
- (Insulated turned blackened metal wheelsets)
- Accurate roof hatches and hardware
- See-through brake platforms
- Separate grabs, ladders and roofwalk
- Accurate paint schemes
- Multiple car numbers per scheme
- Factory-installed Macdonald-Cartier couplers
- Available in singles or multi-packs.
HO GE U50 Diesel - DCC & Sound - General Electric #5000
ETA: July 2023
Detailed Information
GE FEATURES:
Beacon (Flash function in DCC only)
Classification lights (Function in DCC only)
Working Truck lights
Number board lights
Separate see-through air intake grills
MU hoses
Our Legendary Liveries series seeks to explore the -what if- questions that some folks like to indulge in. In the early 1960s GE sent their U25Bs out on demonstration tours around the country in their attractive red and white paint scheme. So, we wondered what if they had done the same thing with the U50? We think that the scheme looks rather striking on this massive beast of a locomotive. So, is your railroad interested in maybe jumping into the horsepower race?
U50 SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated classification lights
Illuminated number boards
See-through air intakes
4-cube speakers
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Four cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Flexi-Van 40ft Trailer - Santa Fe (2pk)
(Piggy Back Service; end doors)
Capture the color and variety of early intermodal operations with SceneMaster flexi-van trailer 2-Packs! Introduced in 1958 with removable wheels for use on specially-equipped flexi-van flatcars, they were later converted to standard 40ft trailers for road and rail service and served into the 1980s.
FEATURES:
- End or side doors as appropriate
- Detailed wheels and bogie with landing gear
Bowser HO 50Ft 2 Door Boxcar Reading No 19206
Ready to run
Roller Bearing Trucks with 36in wheels
Knuckle couplers
Factory - kit
Quick & easy to build
Add fun to any HO scale train set or layout
Plastic parts molded in colors - no painting needed
Colorful printed signs
Complete instructions
Classic American designs found on railroads big & small
Tru Color Paint 015 - Thinner for Acrylic Paint - 1oz
Red - 0ne unit
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Positionable Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
HO General Electric (GE) ES44AC/ ES44DC - GEVO Data - Decals
Scale: HO Scale
Equipment Type: ES44AC - ES44DC - GEVO - Data
HO EMD FT A+B Set - DC/Silent - AT&SF (Freight Scheme) #110 + 110A
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO F89F Trailer - TTX/Yellow #153221
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast underframe
- Wire formed brake plumbing
- Detailed deck
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Minimum radius: 22 inches
- Recommended radius: 24 inches
HO - Air Horns (Unpainted Brass Casting) - Nathan 3-Chime K3L (Canadian National Diesels)
HO F89F Trailer - TTX/Brown #151111
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast underframe
- Wire formed brake plumbing
- Detailed deck
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Minimum radius: 22 inches
- Recommended radius: 24 inches
HO Stepped Tunnel Abutment - Cut Stone (1 Pair)
DIMENSIONS:
Base - 4-1/2 inches (11.4cm)
Max Height - 3-1/2 inches (8.9cm)
HO SD90MAC-H Phase I - DCC Ready - Union Pacific #8509
Detailed Information
UP FEATURES:
#8503 & #8500 represent the first renumbering, originally delivered as #8203 and #8160 respectively.
#8509, #8512, and #8520 are modeled with the starter capacitor removed and the EOT mounted further forward on the fuel tank.
Union Pacific became the only buyer of the SD90MAC-H, known to them as SD90AC, when Canadian Pacific transferred their order to the Phase 2 variant. The first 7 were considered pre-production units and wore 2-3 numbers during their lifetime. The 8500 series we are offering represents the second and third order of SD90MAC-Hs that were delivered between 1997-1999 and before their final renumbering to the 8900 series.
SD90MAC-H SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and ?printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
N Scale Short Barrel Ore Hopper - Ontario Northland: Progressive Green #6508
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
In celebration of the 50th anniversary of Bay Area Rapid Transit (BART) in 2022, Rapido Trains is very pleased to be bringing you the BART Legacy Fleet in HO Scale! Produced in close collaboration with the Bay Area Rapid Transit, this represents Rapidos first foray into the rail-based rapid transit market!
Since its opening in 1972, Bay Area Rapid Transit trains have moved commuters and riders around the San Francisco Bay Area using these iconic cars. These pioneering cars were designed specifically to reduce association with aging transit equipment used in other cities. Instead of using traditional railcar manufacturers, BART signed a contract with Rohr Industries to create their first transit vehicles and contracted industrial design firm Sundberg Ferar to develop the trains futuristic look. Besides being recognized for its status as a ground-breaking achievements of civil engineering, BART is also known for its roster of very distinctive rolling stock. The original cab and center cars (A Cars and B cars) built by Rohr Industries between 1968 and 1975 were mechanically identical, with the exception of the cab overhanging one end of the A cars. Despite being the face of the system, the streamlined fiberglass cab became an operational issue as they limited
flexibility in building trainsets. To resolve this, the first of the C Cars were delivered in 1987 by Alsthom, featuring a more traditional flat cab, allowing them to be used both on the ends as well as in the middle of the consist. Additional C Cars were built by Morrison- Knudsen between 1994 and 1996. BART has run these trains for 50 years, with the external appearance largely unchanged since the initial concepts toured around the Bay.
With BART structures paralleling the Santa Fe, Southern Pacific, and Western Pacifics Bay Area lines, these have continually served as a sharp contrast to the often grimy freight service through the area, with sleek aluminum cars flying past freight drags and commuter service on elevated viaducts paralleling the railroad right-of-way
Each Rapido BART Car features:
- Designed from original blueprints, design drawings and field measurements.
- Track-powered flicker-free interior lighting compatible with DC and DCC layouts.
- Directional lighting, including headlights and red tail lights.
- NEM-style close-coupling system, so your cars always remain as close as possible through any trackwork.
- Minimum 18in radius (22in radius preferred).
- Full, multi-color interior detailing.
- Low-profile drive system in A and C cars allowing for a complete interior with no visible motor.
- Full underbody detail including separate electrical lines, conduit and equipment boxes.
- Highly-detailed, non-operating couplers on A and C cars.
- DCC-equipped models feature accurate sound recordings
HO Budd Slumbercoach - New York Central #10803
All new from the ground up, the Rapido Slumbercoach features:
Designed from original blueprints
Full Rapido level of underbody detail including separate pipes and conduits
Full multi-color interior detail including roomette doors
Track-powered interior lighting (operable on both DC and DCC)
Accurate GSC 41-NDO-11 trucks with disc brake detail
Etched-metal end gates
Sprung diaphragms
Rapidos renowned stainless-steel finish
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - DEAX #11133
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
GE Detail Set - for Southern Pacific, CSX Transportation, Norfolk Southern & Canadian Pacific
Die-cast metal
N Scale Short Barrel Ore Hopper - Ontario Northland: Progressive Green (6pkg) #1
Road Numbers Include:
6501, 6505, 6508, 6512, 6517, 6520
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO Alco FA-1 - DCC & Sound - Great Northern #440D
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO Scale - HO 30,000 Gallon Ethanol Tank Car - UTLX - #2 - 3pack
212883, 212887, 212893
Detailed Information
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
HO Dash 8-40CM - DCC Ready - BCR: Faded Red/White/Blue #4604 - OVR Exclusive
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
Peel n Place Tufts - Light Green Grass
The Woodland Scenics Peel n Place Tufts allow you to model a variety of grassy plants often found in fields, meadows and pastures. Available in several styles of grasses and flowers, these tufts are ready-made and can be used right out of the package. Simply peel the tufts from the tray and place them where desired. Combine Peel n Place Tufts with other Woodland Scenics scenery materials to enhance your layout.
HO GMD SD40-2f - DCC & Sound - Canadian Pacific: Beaver Logo #9023
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
3-Blade Propeller - 120mm x 70mm
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Western Pacific (6pkg)
6-Pack includes the following numbers, all individually packaged: #20001, #20006, #20015, #20081, #20112, #20189
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 85Ft General American G85 Flatcar - GTTX (Yellow) #300477
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
HO EMD SD60M w/DCC & Sound, Norfolk Southern NS #6805
Detailed Information
Norfolk Southern SD60M
#6776
Era: 2004+
#6783
Era: 2009+
#6790
Era: 2004+
#6805
Era: 2011+
All road numbers
Paint scheme: Horsehead
New road numbers
Previous run: March 2009
Working pilot mounted ditch lights when operated using DCC
EMD low snowplow
Conrail-style marker lights
Leslie S-3L-R air horn
Small Sinclair antenna for EOT telemetry
Large Sinclair antenna
Small cab mirror mounted on engineer’s side
Tall cab mirrors
LSL indicator light
Small auxiliary cabinet
Flush Conrail-style dynamic brake intake grille
Recessed radiator fans
SD60I-M FEATURES
Fully-assembled and ready-to-run
Multiple unit (MU) hoses with silver glad hands
Front and rear trainline air hose with silver glad hands
Coupler cut levers with loops
Anticlimbers
Safety tread on the walkways
Square corner left-side cab door with window
Anti-glare panel painted on the nose
Factory applied windshield wipers
See through cab windows
Detailed and painted cab interior with control stand, display screens, detailed crew seats
See-through radiator fans
Factory installed wire grab irons and lift rings
Fine-scale handrails for scale appearance
Underframe mounted bell
Detailed 4,500 gallon fuel tank
HT-C trucks with Timken bearings
DCC-ready features Quick Plugâ„¢ plug-and-play technology with both 8- and 9-pin connector
McHenry scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on Code 70, 83, and 100 rail
Incandescent bulbs for realistic appearance
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Recommended radius: 22inch
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami decoder
Sound units operate in both DC and DCC
Some functions are limited in DC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Slow speed control
Program a multiple unit (MU) lashup with lead unity only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Whisker Scale Self-Centering Knuckle Couplers - Magne-Matic - Medium 9/32in Centerset Shank with #242 Draft Gear Boxes - 25 Pack
The #158 coupler will work anywhere a NO.5, #28, #38, #58, #118, #119 & #148 Coupler will work
This industry leading coupler features an all metal coupler head, shank, and Whisker centering spring. The #158 Magne-Matic Whisker Metal Coupler may be mounted with the #213, #232, #234, #242, #252, #262 Gearboxes (not included) or with other manufacturers cast-on coupler pockets.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.
HO Hyundai 48ft Exterior Post - EMP #254118
PROTOTYPE TYPE:
48ft Exterior Post containers were introduced in 1986 and were a common site on nearly all double stack container trains of the later 80s, 90s, and 2000s. These containers were used for domestic freight service and were purchased by numerous railroads and freight operators in large numbers. These containers were a unique design in which the front and side container panels were supported by aluminum channel posts mounted outside of the container box to provide additional capacity space for larger pallet stacks within the container interior. The posts are a simple spotting feature for these styles of containers. Hyundai was one of a handful of manufacturers of exterior post containers, and while nearly-identical in design to one of their competitors, the additional drainage channel on the top of the container at the head end, and full-height end corner posts differentiate this container from its competitors design. Some of these containers served secondary lives for more than one operator, leading to some interesting graphic combinations over their lifespans. Changes to over-the-road length allowances for 53ft containers and trailers brought about the eventual demise of the 48ft container and a majority of them were withdrawn from service during the mid-2000s and beyond, though limited numbers still remain in service today.
FEATURES:
Hyundai Roof Configuration Version:
A unique feature of the Hyundai design was the additional water drainage channel near the front end of the container and the forward vertical framing members that extended the full height of the container. We have modeled the detail that differentiates this container from those of other manufacturers of 48ft exterior post containers.
Sharp And Accurate Paint And Lettering:
Classonemodelworks.com provides accurate paint and lettering taken from photographs of the prototype, and numbering that matches the class numbers for each operator or railroad. Our containers come with the exterior posts already painted to match the aluminum color of the prototype containers and galvanized coloring for the upper and lower structural channels.
Accurately Dimensioned:
These containers have been accurately reproduced from hand-measured field dimensions of the actual containers, right down to every visible detail. Classonemodelorks.com stands for accuracy and we strive to provide that with every model we produce.
Accurate scale Door latching Details:
Classonemodelworks.com believes in providing models that accurately depict the prototype equipment. Keeping that as our core, we are proud to provide highly-detailed cast door locking bars, latching mechanisms, door bumpers and angled bar lifter.
Tamiya America, Inc Tamiya Putty (White)
Putty is designed for use with plastic models. Before curing it can also be thinned with Tamiya Lacquer Thinner.
Use for repairing and modifying plastic models. This putty can also be used for repairing and covering surfaces of metal and wooden models.
HO 85Ft General American G85 Flatcar - VTTX #300230
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
HO MLW M420 - DC/DCC Ready - British Columbia (Lightning Stripe) #643
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
N Scale Railroad Decal Set -- Canadian Pacific NSC and Trinity Covered Hoppers
HO ET44 Tier 4 - DCC & Sound - Kansas City Southern #5014
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO F30D 50Ft TOFC Flat Car w/ Trailer - Pennsylvania PRR (Delivery) #475331
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons