Otter Valley Railroad Model Trains - Aylmer, Ontario Canada :: N Scale :: Command & Control :: ESU 58820 N, TT, HO - LokSound V5 DCC Direct Sound Decoder

ESU 58820 N, TT, HO - LokSound V5 DCC Direct Sound Decoder

save 16%
ESU 58820 N, TT, HO - LokSound V5 DCC Direct Sound Decoder
LokSound V5 DCC Direct Sound Decoder

LokSound 5 micro DCC blank decoder, 8-pin NEM652

Note - Email what sound file number you want installed into decoder. In the customer comments section at the check out.

ESU 58820 LokSound 5 DCC Direct Sound Decoder- 21mm x 10mm

For Gauge: N, TT, and small HO vehicles

The LokSound V5 DCC Direct fits into most N scale locomotives.
It will fit many N scale locos such as:

•Atlas

•Athearn Genesis

•Broadway Limited

•Bowser

•Intermountain

•Rapido

•Kato


OPERATING MODES:

The LokSound 5 micro is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

This decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Control Unit 6021.

The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.

The LokSound 5 micro decoder is also suitable for analogue DC and AC layouts.

SOUND:

The LokSound 5 micro decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A double class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.

The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.

The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.

FUNCTIONS:

Despite its small dimensions the LokSound 5 micro decoder has at least 6 amplified function outputs as well as one logic output. There are two more logic outputs on the Next18 interface, which alternately may be employed to control RC servos. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.

MOTOR CONTROLS:

Motor control of the LokSound 5 micro has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique Auto Tune function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 micro decoder supplies sufficient motor current (up to 0.75 A) for the intended applications.
Details
SKU 397-58820
Quantity in stock 5 item(s) available
Price: CA$124.99
Quantity
Add to wish list
 

Send to friend

 
: *
: *
: *
 
 

Customer feedback

 
Customer Reviews
There have been no reviews for this product.
Add your review here
Product rating: *
Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):