HO & O Gauge LokPilot 5 DCC Decoder - 21MTC NEM660
Features:
We know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5DCC packed with function outputs. Depending on the interface version, each LokPilot offers 5 DCC Decoder at least 10 amplified function outputs with 250mA output current each. In the executions with PluX22 or 21MTC interface there are 4 outputs to control servos or Logic level outputs added. All-important lighting functions are available. The brightness of each output can be set separately. The decoder masters automatic pushing and pulling when uncoupling for ROCO, Krois and Telex couplings.
Motor control:
The engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors. Operation - The typical hum is a thing of the past. The load control now has up to10 CVs which can be adjusted for difficult cases. The unique Autotune function enables the automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to 1.5A of motor current. Enough juice even for older motors.
Operational safety:
On request, a Power Pack can be fitted to the LokPilot 5 DCC to bridge dirty rail sections.
Protection:
Of course, all function outputs and the motor output are protected against overload.
We want you to enjoy your decoder for as long as possible.
Opaque White Polystyrene V-Groove Siding Sheet (12in x24in) .040inch Groove Spacing
1 Sheet per pack
0.020Inch thick
Groove spacing is center to center of grooves.
Product Information
Used on freight and passenger cars; as well as railroad, commercial and residential buildings. Many 19th- and early 20th-century structures had panels of V-Groove siding applied in horizontal, vertical and diagonal patterns, or in combination with clapboard and novelty siding for decorative effects. These opaque white, sheets are pre-scribed to match different widths of lumber.
HO 89Ft Bethlehem Flush-Deck Flatcar - TTX WTTX #157939
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers
Athearn HO GP7/9 Set Blomberg B Assy (4)
HO 50ft PS 5277 Cu.Ft. Exterior Post Boxcar - Rock Island #302160
FEATURES:
- Laser Sharp Painting and Printing
- 33 inch InterMountain Precision Metal Wheelsets
- Kadee #178 Metal Knuckle Couplers
Date: NEW 8-79
Minimum Radius - 22 inches
N Scale 50ft Plug-Door Track-Cleaning Boxcar - Western Pacific #56057
FEATURES:
- Silver Series Rolling Stock ? Fully Assembled
- Highly Detailed Painted Bodies with Precision Graphics (where applicable)
- Blackened Machined Metal Wheels with RP25 Contours, Magnetically Operated E-Z Mate Couplers
- Non-magnetic Blackened Brass Axles with Needle-point Bearings, Celcon Trucks
- Added Weight for Optimum Tracking Performance
- Track-Cleaning Replacement Pads, item #16999, also available
HO GP40 - Gold DCC & Sound - CP Rail #4600
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
HO Evergreen Tree Value Pack - Ready Made Trees - Blue Spruce (13)
4 - 6 inches (10.1 - 15.2 cm)
The best value in a ready-made tree and the quickest way to add trees to a layout!
Trees have planting pin and optional, detachable base for temporary placement.
HO Large Lump/ Egg Coal Load - Fits 32-1/2inch Scale 2-Bay Hoppers (6 pkg)
Product Information
Load will fit most 2 bay hoppers on the market including Atlas, Athearn, MDC & Bowser hoppers. They can be easily modified to fit in other open hoppers. Load length is 32 1/2 scale feet.
Burlington Northern #513932
Limited edition - one time run of these roadnumbers
Used to haul coal all across US
In service mid-1960s to mid-2000s
New die cast underframe
New sloped sheet braces
New updated brake gear
Correct 36 inch turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO - 3D Red Fire Bucket (10 per package)
HO End-of-Track Bumper - Unpainted Metal (1)
HO 40ft ACF Modernized Welded Boxcar - Detroit & Mackinac #3118
FEATURES:
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #136082
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO Wood Coaling Tower - Plastic Kit
Product Information
Based on a typical two-track design, the Walthers Cornerstone Wood Coaling Tower will be a focal point in any engine terminal. Towers like this were built in yards at servicing facilities as well as along the mainlines and branchlines to refuel engines on the road. This easy-to-build plastic model features a realistic coal bunker plus detailed chutes and mechanisms. A hopper unloading shed sits along one side for receiving coal. Like the prototype, it can serve two tracks at once, making it an ideal choice for maximizing service in minimum space. Place it in the vicinity of a roundhouse or engine shed, turntable, water tank and sand tower and youll have a complete engine servicing facility for your railroad. The Wood Coaling Tower could still be standing in a late-steam or early-diesel era scene, a reminder of how things used to be.
See the selection of Cornerstone railroad maintenance structures here.
Based on a typical North American railroad structure
Serves two tracks
Includes coal delivery shed
Loaded with separate details
Includes decal signs
Molded in appropriate colors
Servicing track centers are 2-1/2inch (6.4cm) Hoist track is 3-1/2inch (8.9cm) from centerline of track under the tower.
HO GE U25B Low Hood - DCC & Sound - New Haven #2509
The HO scale U25B Locomotive features:
Phase I, II & III units represented in 1st run. (Phase IV & other units will come with future runs)
Single-window style for low nose units. (Double-window in future runs)
Both low- & high-short hood versions
Early high- & later low-style side doors.
Road specific details for each model
Working step lights on low-short hood models
Different roadname-specific exhaust stacks
Roadname-specific battery box doors on engineers side
Roadname-specific air cleaner boxes on rear
Working inspection lights on all units
Lighted control stand inside cab
Different types of fuel & air tanks, as appropriate
HO Straight Sections - 6-7/8 inches (174mm)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes! Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation. Suitable for all types of layouts, whether temporary or permanent. This modular track system features an integrally molded roadbed for realistic appearance. Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
U&K Plastics - Note Colour - Roof White, Side Walls Blue
43-1/2 X 40 (office) & 70 X 60 (warehouse) Scale Feet / 6 X 5-1/2 & 9-5/8 X 8-1/4 541-0102
GP40-2 - DCC & Sound - DT&I #408
Detailed Information
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; were excited to include new features often requested, to the GP40-2 and upcoming Genesis models.
DT&I FEATURES:
Chickenwire radiator grills
Front & rear drop steps & footboards
Gong bell on nose
Pilot grabs
Illuminated strobe (effect on DCC+sound version)
No dynamic brakes
2600 gallon fuel tank
Firecracker antenna
Nathan M3 horn
All-weather window on engineers side
DT&I style extra grab irons on nose
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
PROTOTYPE SPECIFIC INFORMATION
By the early 1970s, many first generation diesels were reaching the end of their service lives. The most common replacement locomotives became the GP40-2. EMD began production of the 16-cylinder, turbocharged, 3000 horsepower engine in 1972. These locomotive were developed for service where higher horsepower and faster service were preferable. A major feature for the GP40-2 was the introduction of the -dash 2- modular electrical cabinet. For more than 40 years, the GP40-2 has worked main line freights, locals, switching jobs, yard service, and helper service. Many remain in service today.
Yellow LED (603 size)
G (1:24) Custom Spiral Staircase (1pc)
Use in interior applications where a spiral staircase in desired. Combine with other staircases to achieve any configuration. Precision Injection Molded in Styrene Plastic
SCALE
G
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
19/64In
HEIGHT IN MM
7.5mm
WIDTH IN INCHES
1-35/64In
WIDTH IN MM
39.3mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
4-5/32In
LENGTH IN MM
100mm
HO MP15AC - DCC & Sound - Union Pacific (Yard) #1400
Detailed Information
UPY FEATURES:
Operating front and rear ditch lights
Horn style per road number
Firecracker antenna
This release depicts several of the former MILW MP15ACs that wound up on the Union Pacific. The -UPY- reporting mark denotes -Union Pacific Yard-, and is used to avoid number conflicts with other UP units.
LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Windshield wipers
Lift rings
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
NEW FEATURES:
Operating ditch lights (if equipped)
Operating ground lights
Newly designed motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Excellent low-speed operation
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 1955 Ford F-100 Pickup - Pennsylvania Railroad #A3077
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Rubber tires
HO SD70ACe - DCC/Sound - Progress Rail #4834
PRLX FEATURES:
- Ex CSX units
- Cab high mount headlight
- Nose door without window
- Rear ladder located conductor side
#4831:
- Inverter cabinet with solid X-panel compartment
#4843:
- Inverter cabinet with X-panel compartment and vertical grille
FEATURES:
- New for the SD70ACe, LED lighting
- Correctly-sized illuminated ditch lights (front only)
- Snowplow
- Front and rear trainline air hose with silver tips
- Multiple unit (MU) hoses with silver tips
- Coupler cut bars
- Train line air hoses
- Flat or tapered front and rear anticlimbers
- Safety tread on the walkways
- Nose or cab mounted headlight
- Standard or isolated cab
- Windshield wipers
- Tinted side windows
- Mirrors
- Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
- Airchime K5LLA horn with square or tube style mounting bracket
- GPS Domes or PTC antennas per prototype
- Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
- See-through radiator fans
- Etched dynamic brake grille and screen with appropriate grid detail underneath
- Dynamic brake louver variations per prototype
- Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
- Early or late hand brake housing and wheel
- Early or Late Sander Brackets
- Factory installed wire grab irons
- Jacking pads per prototype
- Plumbing alongside the frame appropriate to the specific railroad and purchase order
- Fuel tanks with single or dual fuel fillers
- HTCR or HTSC trucks per prototype
- Non-sound QuickPlug equipped with NEM 21-pin DCC plug
- McHenry scale knuckle spring couplers
- Minimum radius: 18in
- Recommended radius: 22in
SOUND EQUIPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
EP-5 Electric Loco - DCC & Sound - New Haven, Delivery #377
Detail Variations:
No Vents
HO Model Features:
Accurately scaled from prototype blueprints
Period-correct detail options, including carbody, pantograph and hardware variations
Accurate paint and lettering
Several road numbers per paint scheme (where applicable)
Full cab interior
New Haven delivery and repaint schemes (repainted units have smaller NH logo on nose and re-positioned/larger nose road number)
Directional operating pantographs (sound models only)
DC/Silent or DC/DCC/Sound versions available
DC/DCC/Sound version features an ESU Loksound decoder with accurate -Jet- recordings
Complete lighting package including headlights, class lights, ground lights and cab interior lighting
Factory-installed MacDonald-Cartier metal couplers
B-100-40 Boxcar: Golden West - Ventura County - Single Car #140001
Detail Variations:
6-pack includes the following numbers:
#140001
#140002
#140006
#140009
#140014
#140017
Our B-100-40 model features the following details:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Genuine Kadee #158 Whisker couplers
Newly tooled trucks with turned metal 36 Inch wheels
Separate door rods and door tracks
Road number specific number patches
Separately applied coupler cut levers
HO Thomas & Friends - Clarabel Coach
Annie and Clarabel are Thomas faithful coaches and help him carry passengers around the Island of Sodor. Annie only carries passengers. Clarabel is a composite coach. She has two sections, one for passengers and the other for luggage. Annie is always the first coach pulled by Thomas and travels facing him. Clarabel always travels behind Annie facing away from Thomas.
FEATURES:
- Clarabel is a composite (mixed service) coach
- Featuring a detailed character face and realistic body shell
- All-metal wheels with factory-installed international-style hook-and-loop couplers
- Runs on Bachmann HO Scale E-Z Track, and is Compatible with all popular brands of HO track
- The perfect addition to your Thomas and Friends collection
- Product Measurements: Length 5, Width 1.25, Height 1.8 inches
N Scale Modern Tagger Graffiti Decals - Set #11 (9pcs)
Love it or hate it, graffiti is everywhere. We do not condone painting graffiti on real railroad cars, buildings, bridges, etc. and it is against the law. But defacing your model railroad with Blair Lines Graffiti Decals is fun and still legal as far as we know! All decals are reproductions of graffiti found on real railroad cars.
All of these graffiti decal sets are now lasercut! What this means is you will no longer have to trim these decals close. You only have to cut a couple of small tabs and soak the sheet in water. As an added bonus, the decals are now printed on white decal paper making them more opaque!
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .312In x 14In (3 pcs pkg)
HO AutoFlood III RD Coal Hopper - GLFX #8017
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO NSC 60ft Ingot Flat Car - RTAX Ebenezer Railcar Services
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
Highway Overpass Roadway Kit
includes - 4-22 Ft (3 inches) wide by 50 Ft (7 inches ) wide roadways
Note - Pikestuff guardrails not included
The Rix Modern Highway Overpass for HO scales is modeled after the bridges built today to span over railroad tracks. This style of bridge is typical of most new construction and is used all over the country. The Rix Modern Highway Overpass consist of 50 foot spans which interlock together so that any length bridge can be built.
HO EMD SW9 - DC/ Silent - Canadian Pacific (CP Block Scheme) #7402
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Canadian Pacific:
Delivered in 1953 / GMDD
Short side handrails
Small number boards next to the headlight
Large barrel style headlight
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO EMD SW9 - DCC & Sound - Louisville & Nashville (L&N Grey Scheme) #2269
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Louisville & Nashville:
Delivered in 1950
Short side handrails
Carbody style handrails
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO GE Dash 8-40C - DCC & Sound - w/ Front & Rear Ditch Lights - Canadian National #2028
First built for Union Pacific in the late 1980s by General Electric, the DASH 8-40C diesel locomotives were identified by an enlarged exhaust stack and the mounting of the dynamic brake grids in a square-like unit behind the cab, which housed an enlarged equipment blower fan. These six-axle, 4,000 hp engines are still in service today in North America.
Features:
Ditch lights (8-40CW only)
Number boards, sand fill hatch, and marker lights where appropriate by railroad (8-40CW only)
Realistic die-cast underframe
Factory-equipped with AccuMate knuckle couplers
Coupler pocket designed to accept AccuMate Proto-couplers
Highly detailed coupler cut bars
Multiple unit hoses and trainline hoses
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Directional lighting
Painted crew members
Snowplow and piping on trucks
Recommended minimum radius: 22inch
Atlas Master Series Gold Additional Features:
ESU Sound equipped
Railroad Model Craftsman, January 2024 - Magazine
Features:
Pennsylvania Railroad Nassau Division - by JOHN SETHIAN ? This freelanced O scale empire recalls PRR heavy electric action in central New Jersey.
Pennsylvania Railroad X-53 Boxcar - by JAMES KINKAID ? First of a two-part series on the first 50? plug-door boxcars built by PRR in 1959-1960.
Scratchbuild a CP Sand Tower - by PATRICK LAWSON ? Using styrene and 3D-printed parts to build a model of the sand tower at Nelson, B.C.
Boston & Maine SW1 1109 in HO - by CHRIS ADAMS ? Adding details, paint, and weathering to a Walthers model to recreate a specific B&M switcher.
Build an Inexpensive End-of-Train Light - by DICK WISSBAUM ? A simple circuit powered by track current to add a bit of animation to a caboose.
The End: A Caboose Gallery - by OTTO M. VONDRAK ? Cabooses could be found on the end of every freight train well into the 1980s.
Departments:
Safety Valve ? Letters from our readers
Receiving Yard ? New product reports and industry news/compiled by Harry K. Wong
Test Track ? In-depth reviews of new hobby products
Rail Books ? Jersey Central Baldwin Switchers/review by Harry K. Wong
Timetable ? Listings of railroad-related events contributed by our readers
Perspective ? Just Another Small Coaling Tower/Wayne Wesolowski
Boomer Trail ? RPM Meets/Dan Munson and Harry K. Wong
Branch Line on a Shelf ? Expanding Operations on a Small Layout/Scott Thornton
Painting & Weathering ? South of the Border: NdeM Alco RS-1/Miles Callan
Diverging Points ? Backdrops/Jason Shron
Editor's Notebook ? Commentary from your editor/Otto M. Vondrak
Dealer Directory ? Listing of recommended hobby dealers
Index of Advertisers
HO 85ft General American G85 Flatcar - Southern Pacific #512089
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
HO Union X-3 Tankcar - UTLX (1930s Paint) #32007
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO 60ft Hi-Cube Plate F Boxcar - TBOX #889378
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO 54ft 23K Funnel-Flow Tank Car - ADM #25705
Add variety to your modern HO fleet with these WalthersProto replicas of the 54ft 23,000-Gallon Funnel-Flow Tank Car! Packed with details including the unique funnel-shaped body that speeds unloading on the prototypes, other features include:
- One time run of these roadnumbers, order now - limited quantity available!
- Introduced in the 1960s, still built and operated today
- Prototypes handle all types of petroleum and food products
- Etched metal walkways and platforms
- Factory-applied grab irons
- Brake train pipe and brake rigging underbody detail
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling metal axles and 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Scale H1b Hudson Steam - DC/DCC Ready - Canadian Pacific (Beaver Shield) No #
-Late walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO EMD GP39-2 - DCC & Sound - CSX/YN3 #4307
Detailed Information
CSX FEATURES:
Ex-RDG
Early phase 1 body
Illuminated number boards
Front and rear ditch lights
5-chime horn
RV style roof mounted A/C
Nose toilet hatch
Correct CSX artwork and colors
Chessie/CSX -mail slot- style battery box doors
CSX purchased 20 ex-Reading/D&H GP39-2s in the late 1980s. They operate alongside CSXs other EMD GPs providing power for locals, haulers, and road switching assignments. Most of the fleet can still be seen operating today.
ROAD NUMBER SPECIFIC FEATURES:
#4300
Front and rear CSX style ditch lights (alternate flash in DCC mode)
small front EMD plow
mixed Hyatt and Timkin bearing Blomberg B trucks with outer brake shoes removed
#4307
Front and rear CSX style ditch lights (alternate flash in DCC mode)
small front EMD plow
mixed Hyatt and Timkin bearing Blomberg B trucks with outer brake shoes still installed
#4311
Front tall EMD style and rear CSX style ditch lights (alternate flash in DCC mode)
small front EMD plow
mixed Hyatt and Timkin bearing Blomberg B trucks with outer brake shoes removed
GP39-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Kato Unitrack 20-015 N Scale - 186mm (7 5/16in) Ash Pit Track 2 pcs
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO HEP E8A + A Set - DCC & Sound - Illinois Central (Executive - Gray & Black) #100/101
The IC and CN E9A Details Include:
Photo courtesy of Craig Walker
Correct HEP muffler and hatch
Modified pilots
Blanked sides with appropriate grille work
Roof-mounted cooling coils
Non-skirted fuel tanks
Hyatt roller bearing journal covers
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Accurate E8 sounds provided by ESU LokSound
Complete lighting effects headlights, recessed ditch lights in nose, class lights, backup lights, ground lights, cab lights and more. (Not all lighting features will work in DC mode.)
Numerous road-specific detail parts in both plastic and etched metal.
HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) #484985
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Brake Vent Valve - Regulator pkg(2)
HO Code 100 Remote Control Snap-Switch(R) - Right Turnout
This Atlas HO Scale Code 100 Snap-Switch Turnout features Code 100 nickel-silver rail with black molded-plastic ties and a plastic frog. The turnout comes equipped with an attached remote controlled, above-benchwork electric switch machine. The switch machine can be thrown with a Switch Control Box, 150-56 (sold separately). The 18 inch radius turnout also includes a 1/3 18 inch radius curve compensator track so for planning it equals one 18 inch curved section. The Snap-Switch turnout can also be thrown manually using the small sliding lever on the turnout. The track geometry of Code 100 track matches that of Code 83 Snap Track, so Code 100 track can be substituted for Code 83 in various Snap Track track plans when using adaptor track joiners (sold separately).
CN Piggyback Trailer - Unpainted and Resin Cast Kit
HO Scale Thrall 53Ft Articulated Well Car Set - TTX (Forward Thinking Large) #728257 (3pkg)
Features:
Each car consists of three wells--A,B & C.
Walkway variants specific to prototype
Etched metal detailing
Detailed air reservoirs
Detailed brake valves
Sharp hand grabs and stirrups
Runs on 18inch radius
Recommended for 22inch radius
Floor pin holes for Atlas and other brands of containers
Product Information
When the domestic intermodal container market settled out in the late 90s, the 53Ft long container emerged the winner. Car builders responded with new wells of like size to accommodate the new standard. Introduced in series service in early 2000, Thralls triple 53Ft articulated well car was certainly the best looking of the 53Ft wells. Angular wheel cutouts, 3 flared-bottom wide and 8 narrow side posts give this intermodal age well car character.
HO Outhouse- Laser Cut Wood Kit
2 pieces
HO MLW M420 - DCC Ready- Ontario Southland Railway(Red/White/Blue) #646 Otter Valley Railroad Exclusive
Each model comes with a signed certificate of authenticity from CEOs of Ontario Southland and Otter Valley Railroad
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
Airbrush Professional Set Double Action
Specs:
Part Number: TG-3AS
Type: Double Action, Internal mix, Gravity feed
Head Size: Size 1 (.25MM) Size 2 (.38mm) Size 3 (.66mm)
Fluid Packing: Can spray solvent or water based fluids
Air Volume: 20 PSI at .5 CFM
Air Pressure: 20-75 PSI
Air Inlet: 1/4-20 Thread (Paasche thread) - adapters available
Bottle size: N/A
Spray Pattern: HairLine to 1-1/2 With Fan up to 3
Weight: 1 Lbs
Finish: Chrome plated body
The D500SR airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The D500SR is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses.
The compressor features include:
1/5 HP piston compressor
Regulator & moisture trap
Delivers 1-35 PSI depending on airbrush being used
Standard Paasche 1/4NPT hose fitting
1/8 BPS hose adaptor for competitor hoses
Auto shutoff feature
Carrying handle
Quiet: noise level is 47 Dbs
7 piece airbrush cleaning kit. Can be used to clean any airbrush.
N Scenic Accent Figures - Black Angus Cows (11pcs)
Black angus cows and calves, in various poses, hang out in the pasture!
SD70M-2, CITX #140 - DCC & Sound - SoundTraxx Tsunami2 sound
New for the SD70ACe and SD70M-2, LED lighting
Antenna Dome
Early cab
Nose mount headlight
Nose door with no window
Early handrails
New for the SD70ACe and SD70M-2, LED lighting
Correctly-sized operating ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or tube style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Jacking pads per prototype
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
HTCR or HTSC trucks per prototype
Non-sound QuickPlug equipped with NEM 21-pin DCC plug
McHenry scale knuckle spring couplers
Minimum radius: 18 inch
Recommended radius: 22 inch
HO Single-Track Railroad Bridge Concrete Piers 2-Pack - Kit
Product Information
This Walthers Cornerstone HO Scale Single-Track Railroad Bridge Concrete Pier kit is perfect for use with Cornerstone single-track bridges and is part of the Cornerstone HO Scale Engineered Bridge System. This kit can be built with or without a cutwater and molded cut lines allow you to customize the height to fit your bridge height. The kit includes parts for two single-track concrete bridge piers and comes molded in a concrete base color.
Part of the Cornerstone HO Scale Engineered Bridge System.
Common prototype design used with various types of bridges
Fits steam, diesel and modern eras
Use with Cornerstone single-track railroad bridges (sold separately)
Simulates poured concrete construction
Build with or without cutwater ends for extra realism
Adaptable to other bridges
Parts for two complete piers
Molded cut lines for easy height adjustment to 4-11/32, 3-15/16, 3-1/2, 2-3/4 and 1-31/32inch 13, 11, 9, 7 & 5cm
PLEASE NOTE: If you are planning on installing piers with the wider Single Track Truss Bridge (933-3185, sold separately), use the Double-Track Railroad Bridge Concrete Pier 2-Pack (933-4552), sold separately.
N Scenic Accents(R) Figures -- News stand
Plastruct 90023 ABS I Beam 1/8
1/8 x 15in
.32 x 38.1cm pkg(7)
N Scale Concrete Slab Double-Track Straight Viaduct - 9-3/4in (2pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly.
The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
N Scale Concrete Tie Straight Double-Track - 2-7/16 inches (2/pkg)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
Tru Color Paint 027 - Acrylic -D&H Blue - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
50ft Ext Post High Cube Plug Door Box - Wisconsin Central #1739
MODEL FEATURES:
Former MDC tooling
Brand new paint schemes
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Separate brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 18inch
W&LE #78932, #80905, #80913, #80913
MODEL FEATURES:
Wire and plastic handrails, stirrup steps, ladders and underbody details
Separately applied brake gear including brake wheel, air reservoir, and brake cylinder
Bettendorf or roller bearing trucks with 33In machined metal wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers
Painted and printed for realistic decoration
Weighted for trouble-free operation
Interior plastic blister safely holds the model for convenient storage
Window packaging for easy viewing
Fully assembled
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
The development of the hopper car went along with the development of automated handling of such commodities, with automated loading and unloading facilities.
Open hopper cars are used for commodities such as coal, which can suffer exposure with less detrimental effect. Hopper cars have been used by railways worldwide whenever automated cargo handling has been desired.
Atlas Brush Company 255-100 10/0 Taklon Ultra Mini Brush
Walthers SceneMaster All Scale - Tear and Plant Meadow Grass - Light Green
Measures 7-7/8In x 9In 20 x 23cm
Product Information
SceneMaster ready-to-use Tear and Plant products are perfect for adding grass in large areas. Available in a variety of styles and seasonal colors to add realistic vegetation to any layout from Z to G Scale, ready-to-use mats are flexible to fit uneven terrain and are easily cut or torn to fit available space. Use Tear and Plant Grass Mats along with other SceneMaster scenery materials to add realism to your layout!
Realistic plants in minutes - requires no special skills!
Easily cut or torn into smaller pieces or to fit available space
Great for adding a realistic variety of plants to any area
Flexible for easy use on uneven terrain
Ready to use
Varied colors and flocking for added realism
Flexible transparent base blends into existing scenery
HO EMD FT A+B Set - DC/Silent - Great Northern (GN As Delivered) #402-A + 402-B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
Model Wash - Olive Green - 35ml Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Olive Green is recommended for adding shadows around rivets or recessed details on vehicles painted in Olive Green or faded Pale Green.
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Green
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
HO MI-JACK Translift(R) Intermodal Crane - Kit
DIMENSIONS:
7-3/8 x 3-3/4 inches (18.7 x 9.5cm)
This Walthers Cornerstone HO Scale MI-JACK Translift Intermodal Crane is based on the versatile crane that moves trailers and containers between trains and trucks or container chassis. Its wide enough to straddle the intermodal car and two rows of trailers or containers parked side by side, making short work of loading or unloading.
- Must-have detail for 1970s and later intermodal terminals
- Used worldwide
- Holds containers or trailers
- Adjustable parts to model a working crane
- Includes magnets to hold containers
- Colorful decals
HO USRA Single-Sheathed Boxcar: Maine Central
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
3/16 inch OD Round Aluminum Tube 0.014inch Thick x 12inch Long
Round Aluminum Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 3/16 inch
HO 5820 Covered Hopper - Procor/UNPX (Union Carbide) (6pk)
Includes the following numbers, all individually packaged:
#122023
#122026
#122041
#122044
#122059
#122068
Era: November 1977+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO Just Plug Lighted Vehicle - Comfy Cruise
This cruiser will take every opportunity to hit the blacktop, whether you are going for a scenic drive or a city run!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
Tru Color Paint 168 - Acrylic - Iron Oxide - 1oz
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - MRRX #4806
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale 52Ft Mill Gondola - CEFX #30240
Detailed Information
MODEL FEATURES:
Body-mounted McHenry knuckle couplers installed
Fully assembled and ready for your layout
Screw mounted trucks for accurate tracking
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
60ft Pullman-Standard Flatcar - Ready to Run -- Illinois Terminal
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
GMD SD40-2f - DCC Ready - CP Rail (Round Porthole, White Stripe) #9010
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
HO Value Line RTR - 13 Panel Coalporter - Conrail #503077
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Flat Brushable Acrylic - Earth - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
Canadian National #D100
Phase 1 RDC Spotting Features:
-Low headlight (CN later added their unique top hat headlights to these units to accomodate diaphragms)
-Manufactured truck sideframes Large cab and end-door windows
-Numberboards on the car sides next to the doors
-Optional, separate pilot mounted to body
-Small curved skirts next to the end steps
-Rooftop fluting ends in-line with the end doors
-Two sloped rectangular grills over the radiator/fan sections on each side separated by a solid pane
Model Features:
-Rapidos acclaimed stainless steel finish
-Separate underframe piping and conduit Loads of roadname-specific details
-Working Gyralite & ditch lights (where appropriate)
-Fabricated or cast truck sideframes (as appropriate)
-Separate grab irons and front door chains
-Etched-metal roof grills and fan covers Lit number boards and class lights
-Detroit or Cummins engine sounds (as appropriate)
-Standard bell or E-bell sounds (as appropriate)
HO New Look Bus - Golden Gate Transit (San Francisco) - 70 Golden Gate Bridge - Deluxe #866
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
9-1/4 x 16-7/8 x 6-1/2 inches - 23.5 x 42.8 x 16.4cm
Interior Inspection Pits, Platforms & Craneway
Use with Classic or Modern Power
Holds up to 3 Locos up to 17 inches long each.
HO Custom Brown Crates - Auto (4pk)
Pre-painted brown and labeled with assorted auto parts labels.
HO Value Line RTR - 13 Panel Coalporter - Conrail Quality #505535
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO Scale Thrall 53Ft Articulated Well Car Set - TTX (Forward Thinking Large) #728576 (3pkg)
Features:
Each car consists of three wells--A,B & C.
Walkway variants specific to prototype
Etched metal detailing
Detailed air reservoirs
Detailed brake valves
Sharp hand grabs and stirrups
Runs on 18inch radius
Recommended for 22inch radius
Floor pin holes for Atlas and other brands of containers
Product Information
When the domestic intermodal container market settled out in the late 90s, the 53Ft long container emerged the winner. Car builders responded with new wells of like size to accommodate the new standard. Introduced in series service in early 2000, Thralls triple 53Ft articulated well car was certainly the best looking of the 53Ft wells. Angular wheel cutouts, 3 flared-bottom wide and 8 narrow side posts give this intermodal age well car character.
HO 16,000-Gallon Clay Slurry Tank - UTLX (3pk) #2
MODEL FEATURES:
- Separately applied fittings nozzle, manway, and small safety valve nozzle
- See-through Photo-etched metal walkways and end platforms
- Full brake plumbing and rigging including brake wheel, air reservoir cylinder, triple valve, brake linkage, trainline, brake rod, large brake
- Printed marking on the sides, ends, and top of the tank body
- Fine scale side ladders
- Placard holders
- Printed marking on the sides, ends, and top of the tank body
- Equipped with McHenry AAR upper/lower shelf couplers
- 36 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Multi-packs feature unique road numbers
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Kaolin, a fine white clay, is produced by the natural chemical weathering of aluminum silicate minerals such as feldspar. Mined in the southeast United States (primarily Georgia and Florida), kaolin is used in the manufacture of ceramics, bricks, light bulbs, cosmetics, medicines and food additives. The largest use is in the manufacturing of paper, especially in creating glossy paper. Kaolin is shipped both as a dry powder in covered hoppers and in tank cars with water as a slurry. In the slurry form the weight of water requires the tank cars be smaller capacity compared to other liquids such as ethanol and LPG. Identical tank cars are also used to haul calcium carbonate slurry, used in the making of lime and cement.
One of the more modern versions of the 16K Gallon Tank car is designed and manufactured by UTLX Manufacturing Inc (formerly Union Tank Car). The car is a 286K (referring to a 286,000 pound gross rail load limit) design with a capacity of approximately 16,000 gallons. The capacity varies slightly between UTLX and Englehard, the operators of the cars. The car is an AAR Plate C clearance car with a 111-inch I.D. tank and an overall length of 44 feet. For a complete bottom unloading the car incorporates a Funnel-Flow design. The cars are lined and kept in dedicated service to avoid cross-contamination.
HO Maxwell Ave. Porch Kit
The Rix Maxwell Ave. Porch Kit is molded in styrene plastic and features clapboard gable, asphalt shingle roofing, brick porch, doors and steps.
Dimensions:
9 deep x 21 wide x 17 tall scale feet
1-1/4 x 2-7/8 x 2-3/8 inches
HO RTR 40Ft Single-Door Steel Boxcar - Great Northern (Large Rocky Logo) #3869
(Big Sky Blue, white)
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. Check out the entire line of Bowser HO Scale ready-to-run boxcars.
HO 60ft Flat Car - Southern Pacific (3pk)
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
Plastruct 91008 Grey ABS Sheet .125 (2pcs pkg)
Specifications In Inches:
Thickness: .125
Width: 7 (175mm)
Length: 12 (300mm)
Athearn Genesis HO 13,600 Gallon Acid Tank Car, Procor #16530
Athearn Item #: ATHG25643
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Two different body phases (early and late)
Many separately applied details
Etched metal walkways
Different top platforms as appropriate per prototype
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18in
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry (TM) scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Evergreen Scale Models - OD White Polystyrene Rod .10In x 14In (5 pcs pkg)
HO EMD GP7 - DCC & Sound - Undecorated Non-Dynamic - Phase II
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
UNDEC FEATURES:
Optional parts include...
Dual Leslie A-200s or single S3L horn
Winterization hatch
1200 and 1600 gallon fuel tanks
Speed recorder
Foot boards
Dual MU receptacles
-Nail-, -Firecracker-, and Sinclair -Ice Skate- antennas
In 1949 EMD unveiled the GP7, a general-purpose road-switcher that was suitable for a variety of tasks on the railroad. The GP7 went through several production variations, known as -phases- by railroad enthusiasts. -Phase II- units were typified by the addition of a box on the walkways on the firemans side, as well as the (optional) addition of dynamic brakes. This undecorated release is a good option for do-it-yourself modelers or freelancers, and comes with a selection of common, optional detail parts as well.
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO Code 83 Nickel Silver DCC Friendly #6 Turnout - Right Hand
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 83 rail!
Combining great looks and great performance in a complete system, each item comes fully assembled and features:
-Thin profile ties in realistic dark brown with enhanced wood grain detail
-Fine profile molded spike and tie plate details on each tie
-Spike-mounting holes positioned next to the rail
-Molded starter points on underside of ties for fasteners
-Custom formulated nickel silver rail for outstanding electrical conductivity
In addition to these details, each DCC-friendly Code 83 Turnout features:
-Snap-action points
-Solid rail points for better conductivity
-Isolated frogs with built-in jumper for powering as desired
-Current jumpers entering and leaving the frogs
-Insulated tie bar
HO 10 Inch Track Alignment Gauges - Curved - 36 Inch Radius
RibbonRail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking, and joining rail. Track Alignment Gauges are precision machined to NMRA standards and will work on any code of HO Scale rail. Available in many curve radii as well as straight.
HO 40Ft Smooth Side Containers - SeaLand SEAU #1 (3pkg)
MODEL FEATURES:
Fully assembled
Easily stackable
Each container is individually numbered
N scale Privacy Fence - Kit
Easy-to-assemble N Scale Fences from Woodland Scenics feature modular design and include gates, detailed hinges and planter pins for easy installation. Each fence kit includes parts to build 192 scale feet of fencing. Fences for all kinds of scenes are available as part of the line of Woodland Scenics N Scale scenery details.
Evergreen Scale Models 9904 - .010in Yellow Transparent Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
DN163K0B 1 Amp N Scale Mobile Decoder for Kato N scale F3 A & B
Features:
Designed to fit the Kato N scale F3 A & B
Golden-White LEDs for added realism
Decoder Lock equipped
Evergreen Scale Models 4041 .040in Opaque White Polystyrene Clapboard Siding (1sheet)
Tru Color Paint - Acrylic - EMD Late Demo Blue - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Enterprise 2-Bay Covered Hopper - New York Central (NYC Gothic) #881429
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO Heavy-Duty Off-Road Dump Truck - Yellow
HO Alphabet & Number - Stencil Gothic Railroad - Black - Waterslide Decals
HO B-50-15 Boxcar - As Built w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #15245
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Cotton Belt St. Louis South Western
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
HO NSC Ballast Hopper - Canadian National (Maintenance Scheme) #302153
1976+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO - Bracketed Air and Signal Lines
Air and signal lines in a mounting bracket, as installed on the pilot of dual service and passenger locos. Parts for two engines.
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
Factory installed Celcon handrails
Individually applied wire formed grab irons
5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
See-through cab windows
DCC Ready 21-pin NEM plug
LED Illuminated front and rear headlights
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brand of track
Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMDs most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
PROTOTYPE MANUFACTURER: EMD
Axles: 4
LIGHTED: LED Lighting
Minimum Age Recommendation: 14 years
Is Assembly Required: No
HO ALCo RS-3, Phase 3 - DCC/Sound - Lehigh Valley #212
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- fuel tank
- can motor
- flywheels
- blackened wheels with RP25 flanges and knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound V5 decoder
IJN Gray Green Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO Delivery G43A 2-1968 Gondola - Penn Central #576104
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inchh Wheels
PC -Delivery G43A 2-1968- in the original Penn Central green paint scheme, and a PC version we have not yet offered! These gorgeous models have 2 placards in place for the PC reporting marks, road numbers, and ACI label on the left side of the car. On the right side is an additional placard that includes a PC logo and Penn Central lettering. These placards are utilized on this class of PC car since these cars have side corrugations on each panel, where they knew that putting paint on the corrugations would not last very long! These cars have corrugated ends, and the Tangent replica includes oxide red car interiors ? on the interior walls and ends ? like the prototype. We even duplicated the slight green overspray on the inside end corners! The 100-Ton trucks feature accurate rotating -Timken- caps.
HO 40Ft Refrigerated Container - CSAV Set #2 (3 pkg)
Road Numbers: CRLU 7253341, CRLU 7253399, CRLU 7253450
(White/Blue/Red)
MASTER MODEL FEATURES:
40-foot High-Cube Refrigerated Container
Composite materials sandwich-sides design
Detailed picture window refrigeration unit with separate parts
ISO Type 45R1
Five hinge / four bar doors with OUT style handles
Each set comes as a 3-pack
1955-57 GMC 660 Tandem Axle Tractor - Unpainted and Resin Cast Kit
Spray Can - Metallic Green (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 40ft 16K Gallon Tank Car - Corn Products Corp/CCLX #1350
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
N Scale AutoFlood III RD Coal Hopper - CEFX #600530
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO Magnetic Signal Co. Model 10 Wigwag Flagman
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian Pacific #304661
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Precision Cutting Kit, Carded -- Miniature Cutting Set w/K1 Knife
great starter kit, may be green or blue
mat is 5.5" - 9"
14 cm x 22.8 cm
Double sided
HO Scale - 1951-55 White Freightliner Long WB Tandem Day Cab Tractor - Unpainted and Resin Cast Kit
Tru Color Paint - Aerosol Spray Paint Can - Weathered Black- 4.5oz (135mL)
Tru-Color Aerosol Spray Paint is ideal for painting any model when you dont have an airbrush. This solvent-based acrylic paint is great for weathering and wide-are coverage. Available in railroad and weathering colors, Tru-Color spray paint comes in spray cans as well as in liquid colors designed for brush or airbrushing.
85 ft Budd Large-Window Coach - Ready to Run - Alaska Railroad
(silver, blue)
Product Information
Add more seating on your classic streamliner quickly and easily with this WalthersMainline HO Scale 85Ft Budd Large-Window Coach! Nicely detailed, affordably priced and built tough for years of dependable service, this car is based on fluted-side cars used across the continent. 85Ft Budd Large-Window Coaches are perfect for use with other WalthersMainline HO Scale streamlined passenger cars.
Model passenger service in minutes at WalthersMainline prices!
Based on streamlined cars used by many roads
Eight authentic car types
Operates on 18 Inch radius curves
Correct prototype 85Ft length
Tinted window glazing
Fully assembled, ready for fun on your railroad
Rugged construction for years of service
Detailed body
Full interior
Correct 36 Inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
LED interior lights available separately
Molded drill starter points for add-on wire grab irons (sold separately)
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140096
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO BiLevel Commuter Car - UTA FrontRunner - Set #2
Salt Lake City
Includes: Cab: 109 Coaches: 201, 208 (Series 4)
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO Kenworth W900L Sleeper Cab Tractor w/Pneumatic Bulk Trailer - Red Zone
Tru Color Paint - Flat Brushable Acrylic - Flesh - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
HO 59Ft 4550 Cu. Ft. Cylindrical Covered Hopper - Trough Hatch - Santa Fe (ex-Koppel) #317649
National Steel Car Co. 59Ft, 4550 Cu. Ft. Cylindrical Covered Hopper - Trough Hatch
The car is commonly referred to as the -Canadian grain car-. Between 1972 and 1985 almost 20,000 cars were built for the Canadian government to assist the Canadian railways in transporting vast quantities of grain. Canadian National, Canadian Pacific, and other companies own or lease this type of car.
The trough hatch cars feature road name specific parallel ribbed roof hatches, diagonal ribbed -zig-zag- roof hatches, or smooth flat hatches as per the prototype. All cars feature numerous wire details, etched metal roof walks, laser sharp painting and lettering, accurate colors, 100 ton trucks with 36inch metal wheelsets, and metal knuckle couplers.
EMD E8A (DC/DCC/Sound) New York Central - Cigar Band #4059
Rapidos E8 model features:
3D laser-scanned body shell
Accurate nose and roof contours
Seven different noses
Three different back ends
Two different sides – with and without lifting lug covers
Three different steam generator options
36inch fan, 48inch fan or non-dynamic brake options
Single- or dual-headlight configurations
Freight or passenger pilots
Three styles of side grills
Original porthole sides or rebuilt with blanked sides (including unique variations)
Skirted or non-skirted fuel tanks
Original square and sloped or Hyatt roller bearing journal boxes
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Complete lighting effects – headlights, class lights, backup lights, ground lights, cab lights and more
Numerous road-specific detail parts in both plastic and etched metal
Details Include:
Side portholes
No dynamic brakes
Single MU door nose, right of headlight
Freight pilot
Standard rear
Cab-side walkway
Cab side lifting lug covers
Hyatt bearing trucks
Dual steam generators, widely spaced
Vertical Farr grill
No skirts
Pilot MU hoses
HO H-6-G - DC/Silent - Painted/ Unlettered - Steel Cab
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
High Self Adhesive Daffodil Tuft Strips - 4mm (10 strips)
10 4mm high self adhesive daffodil tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.
HO Grain Dryer - Kit
Product Information
The Walthers Cornerstone HO Scale Grain Dryer is based on structures found at elevators, feed mills and on farms across the continent. Featuring realistic sheet metal construction complete with panel lines, the Grain Dryer can be used with all kinds of metal grain handling bins and silos. Typically, grain dryers are connected to other structures with the Grain Conveyor (933-3124, sold separately). All Grain Dryer parts are molded in an appropriate base color and complete instructions are provided.
Use with other Walthers Cornerstone grain handling structures
Realistic sheet metal construction
Easy to build plastic kit
Molded in appropriate color
HO Storefront Signs - Main St. (Set #1)
Blair Line HO Scale Business and Storefront signs are printed in appropriate colors on thin plastic for easy assembly or placement with plastic cement or CA glue. Colorful signs are based on real signs and many include two identical signs for back-to-back, two-sided mounting. Steam and diesel-era signs make great roadside, street-side, trackside and structure details.
HO GP9RM - DCC Ready - Canadian National (Stripes) #4000
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO USRA Single-Sheathed Boxcar: D&H
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Grab Irons .012inch Wire - pkg(12)
HO Lightweight Coach - CNR - 1954 Scheme #5598
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
Detroit Toledo and Ironton - DT and I #9625
Key Features
•Fully assembled and ready for your layout
•Upgrades include seperately applied grab irons and stirrup steps
•33†solid nickel silver wheels with RP25 contours operate on all popular brands of track
•McHenry scale knuckle spring couplers installed
Acrylic Flat Colors - Light Blue - 3/4oz (23mL) Bottle
XF-23
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
Port Sharing Device
Use the Port Sharing Device with a Light Hub or Sequencing Light Hub to add up to four Stick-On or Nano LED Lights per Light Port.
HO NSC 5304 Boxcar - Canadian National (Delivery w/ Green Door) #557634
The Rapido NSC 5304 cu.ft. CN Combo Door Boxcar features:
Separate grab irons installed at the factory
100-ton Barber S-2 trucks, with metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe
Mold-A-Scene Plaster-1/2 Gallon - Dry
Mold-A-Scene is a plaster material that can be shaped like modeling clay, but sets like plaster, without a mold. Its longer setting time allows a modeler to add terrain contours to new or existing scenery. It is excellent for dioramas, layouts and models, as well as volcanoes and other school projects. Dries overnight.
Excel Hobby Blades - Self Healing Cutting Mat - Green - 18In x 24In
The Excel Blades Self-Healing Mat is a must-have accessory for hobbyists and designers who frequently use cutting tools.
12 x 18In in size
Available in Green and Clear
Features a one-inch grid pattern for accurate cutting and trimming
These cutting mats feature a surface material that absorbs cuts from a sharp Excel Blades knife.
The cutting mat reserves the surfaces around your work space and protects it from sharp tools creating damage to the area.
Phthalate free
Made from PVC
Vallejo 73826 - Model Wash - Weathering FX - Mud and Grass - 40mL Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Blue Grey is recommended for vehicles with a Panzer Grey base color, as well as all vehicles with a similar grey base.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - CIL Monon #9146
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Morning Sun Books Inc. Minnesota Mining Railroads in Color Volume 2
Minnesota Mining Railroads in Color Volume 2 from Morning Sun Books is a look at two iron ore hauling railroads, Reserve Mining Company and Erie Mining Company, plus their successors. These two private industrial mainline railroads were constructed in the mid-1950s to support new taconite iron ore processing operations and fielded a wide variety of first generation diesel models. This volume covers the history of these operations as well as locomotives and rolling stock!
HO EMD SW9 - DC/ Silent - Santa Fe (ATSF Bookend Scheme) #2424
Santa Fe:
Delivered in 1953
Unique stepped louvers on hood
-Trash can- style spark arrestors
Large cab sunshades on front and rear cab windows
Carbody handrails
Working Pyle 360 warning light
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO 85ft Pullman-Standard Regal Series 4-4-2 Sleeper - BNSF
Passengers on your Walthers Proto Combined Super Chief/El Capitan are sure to have a memorable trip aboard the 85ft Pullman-Standard 4-4-2 Regal series Sleepers! Santa Fe purchased 16 of these spacious sleepers, fitted with four double-bedrooms, four compartments, and two drawing rooms for postwar Super Chief service, which were later used on other name trains and served with Amtrak.
Ready for operation or display, features of this Walthers Proto replica include:
- Real metal finish simulates stainless steel
- Correct GSC 41-NDO Outside Swing Hanger trucks as used in the 1960s
- Factory-installed grab irons
- Prototypically accurate window tinting
- Window gasket details as appropriate
- Sprung operating diaphragms
- Modeler-installed extended drawbars for 22 inch radius curves included
- Turned metal RP-25 wheelsets and correct trucks with built-in electrical contacts
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24 inch radius is recommended for operation.
HO Scale SD30C-ECO - DCC & Sound - Canadian Pacific #5026
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
Hi-Tech Details HO 6003 Universal Antenna Dome GE Version for BNSF and UP
Features
Molded in white plastic and ready for finish to be applied.
HO 57ft Mechanical Reefer - Union Pacific/ARMN #756036
Move all kinds of perishable products on your HO railroad with Walthers Mainline 57ft Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s.
Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including:
-Limited edition - one time run of these roadnumbers
-Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
-Keystone or Hydra-Cushion underframe detail as appropriate
-Short ladders and low hand brakes
-9ft Youngstown plug door with separate latch bars
-Authentic Stanray peaked, ribbed roof with capped exhaust stack
-Detailed underbody with brake gear and fuel tanks
-70-ton roller bearing trucks
-Correct 33in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO Vintage Gas Station Signs - Skelly (50)
Contains 50 full color signs from the 1930s-1950s. HO Scale. Unique weathering and application instructions included in all poster/sign packs.
HO Union X-3 Tankcar - Products Tank Car (PX) #33451
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO ALCo RS-3, Phase 3 - DCC/Sound - Burlington Northern #4082
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- fuel tank
- can motor
- flywheels
- blackened wheels with RP25 flanges and knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound V5 decoder
HO Scale 1956-66 White 4000 Single Axle Day Cab Tractor - Unpainted and Resin Cast Kit
N Scale Wide-Vision Caboose - CSX: Safety First Scheme #21195
The Rapido Trains N scale Wide Vision Caboose features:
Super-detailed underbody including all separate air and brake piping
Free rolling Barber-Bettendorf caboose trucks
Detailed interior
Full end detail, including uncoupling levers
Separate metal grab irons installed at the factory
Interior Battery powered lighting and operating end marker lights
Optional roof mounted air conditioner
Knuckle Couplers mounted at the correct height
Optional fuel oil tank details (Road name dependent)
HO 40ft Milwaukee Road Rib Side Boxcar - Modern Paint Scheme #33283
Date: MS 11-72
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- Etched Metal Roofwalk or No Roofwalk Per Prototype
- 33 Inch Intermountain Precision Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
Iowa Scaled Engineering - ProtoThrottle Premium Handle Upgrade
Upgrade your ProtoThrottle with these premium handles! Kit includes:
2 - Short (3/4") Brass Handles
1 - Long (1") Brass Handle
1 - Short (3/4") Red Plastic Handle
All Scale Layout Wire - 50Ft (15.2m) - Green
Product Information
Atlas Layout Wire is 20 gauge stranded copper wire and is great for general use on layouts in any scale. Its available in five colors that match the 5-Conductor Ribbon Wire 150-312 (sold separately). Each reel has 50Ft 15.2m of wire. Layout Wire is part of the line of Atlas electrical accessories and lighting.
OVR Exclusive - HO Bi-Level Auto Rack - CP Rail/TTGX #603539
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO 65Ft Deck Truss Bridge Kit - Code 100 Nickel Silver Rail
Product Information
The Atlas HO Scale Code 100 65Ft Deck Truss Bridge is based on a commonly used bridge used across North America. The bridge is supplied with Code 100 nickel silver rail on its deck surface and is compatible with all Code 100 track. For track planning purposes it is 9inch(22.9cm) long - the same size as a standard piece of straight Snap Track.
Code 83 Through Plate Girder Bridge Kit, Double Track
Girder measures 8 inches Long
Track piece measures 9 inches Long
Highly detailed
Prototypical bridge track
Easy assembly
HO SD70ACe - DCC & Sound - Montana Rail Link (MRL) #4308
Overview
MRL FEATURES:
Lit Number Boards
Truck lights
Nose mounted headlight
Early Brake wheel
As-delivered scheme
In 2005, MRL ordered 16 SD70ACes from EMD to help replace the aging fleet of their older EMD power. They were painted at CEECO in Tacoma WA and placed into service shortly after.
SD70ACE SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian National #621333
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO ET44 Tier 4 - DCC & Sound - CN Heritage/BC Rail #3115
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO Slab-Side Covered Hopper - CGLX #402
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
HO UAC TurboTrain Completion Pack: CN Rail
#203-226-251 + IC-34 #261
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model.
N Scale Flexi Flo Hopper (Late) - MDTX Repaint #897878
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286346
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
HO MLW M420 - DCC & Sound - British Columbia (Two-Tone Stripe) #646
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO 73Ft Center Partition Car - TTX (w/Yellow Conspicuity Stripes) #857020
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
10Ft 6In Modified 1937 AAR Boxcar - Erie - Large Herald #80227
N Scale 40ft Corrugated LC Container - K-Line #1 (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered
HO Laser-Cut Acrylic Wheel Masks for WalthersProto/LL Proto 2000 33 Inch Wheels
These paint masks are precision cut to fit popular high quality HO scale wheel sets. It not only keeps paint off of the wheel treads leaving just the front and back wheel faces and axle exposed for color, but keeps the modeler?s hands clean as well. The mask will hold four axles and, once painted, each of its fingers can be individually pulled apart to release one wheel set at a time. Unlike cardboard masks, these will last for years! The mask is easy to assemble from 5 clear acrylic parts; a plastic solvent glue is all that is required.
HO Peterbilt 389 Sleeper Cab Tractor w/Pneumatic Bulk Trailer - Orange, Silver, Chrome
HO Scale GE ET44AC -Tier 4 EF-644t - Sound & DCC - Canadian National #3009
This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units
OTHER DETAILS INCLUDE:
Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
Sound locomotives are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
HO One-Piece Brick Smokestack - Assembled (2pk)
DIMENSIONS:
1-1/4 x 10-1/4 inches (3.2 x 25.7cm)
Detail any industry along your railroad with the Walthers Cornerstone HO scale one-piece brick smokestack. Great for steam-era and transition-era scenes, many still stand today. Perfect for upgrading other kits or completing scratch-building or kit-bashing projects, One-piece brick smokestacks feature finer brick detail and are molded in one piece so there is no assembly necessary and no seem to hide. Package includes two one-piece brick smokestacks. One-piece brick smokestacks can be used with many Cornerstone HO scale industry kits.
- Realistic brickwork
- Molded in appropriate color
Dust Dabber
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
HO GMD-1 - DC/Silent - Canadian National (1900s Noodle w/ Red Cab) #1907
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
HO 5820 Covered Hopper - Procor/UNPX (Low Black Solid) #122954
Era: 1990s+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO Vulcan Manufacturing Company - Kit
Product Information
Found in many cities, the prototypes for steel fabricators like the Walthers Cornerstone Vulcan Manufacturing Co. generate lots of business for the local railroads. Raw materials arrive from the steel mills, and some finished pieces are also delivered by rail. Others are shipped by a fleet of trucks. The kit includes the detailed main building, with its realistic brickwork and tall smoke stack. Out in the yard, detailed trusses and a canopy roof are provided to model an overhead crane. Decals for the big Vulcan Manufacturing sign out front are also included.
Great for steam or diesel-era layouts
Brick main building with clerestory
Square brick smokestack
Detailed trusses and a canopy roof (Overhead Crane 933-3102, sold separately)
Molded in appropriate colors
Realistic decals
HO 50Ft FMC 5283 DD Boxcar - Southern Pacific /Plain #244565
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Positionable sliding double doors
Body-mounted McHenry operating scale knuckle couplers
Painted and printed for realistic decoration
Precision machined metal wheels
Highly-detailed, injection molded body
Weighted for optimum performance
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
HO Hyundai 48ft Exterior Post - NACS #680023
PROTOTYPE TYPE:
48ft Exterior Post containers were introduced in 1986 and were a common site on nearly all double stack container trains of the later 80s, 90s, and 2000s. These containers were used for domestic freight service and were purchased by numerous railroads and freight operators in large numbers. These containers were a unique design in which the front and side container panels were supported by aluminum channel posts mounted outside of the container box to provide additional capacity space for larger pallet stacks within the container interior. The posts are a simple spotting feature for these styles of containers. Hyundai was one of a handful of manufacturers of exterior post containers, and while nearly-identical in design to one of their competitors, the additional drainage channel on the top of the container at the head end, and full-height end corner posts differentiate this container from its competitors design. Some of these containers served secondary lives for more than one operator, leading to some interesting graphic combinations over their lifespans. Changes to over-the-road length allowances for 53ft containers and trailers brought about the eventual demise of the 48ft container and a majority of them were withdrawn from service during the mid-2000s and beyond, though limited numbers still remain in service today.
FEATURES:
Hyundai Roof Configuration Version:
A unique feature of the Hyundai design was the additional water drainage channel near the front end of the container and the forward vertical framing members that extended the full height of the container. We have modeled the detail that differentiates this container from those of other manufacturers of 48ft exterior post containers.
Sharp And Accurate Paint And Lettering:
Classonemodelworks.com provides accurate paint and lettering taken from photographs of the prototype, and numbering that matches the class numbers for each operator or railroad. Our containers come with the exterior posts already painted to match the aluminum color of the prototype containers and galvanized coloring for the upper and lower structural channels.
Accurately Dimensioned:
These containers have been accurately reproduced from hand-measured field dimensions of the actual containers, right down to every visible detail. Classonemodelorks.com stands for accuracy and we strive to provide that with every model we produce.
Accurate scale Door latching Details:
Classonemodelworks.com believes in providing models that accurately depict the prototype equipment. Keeping that as our core, we are proud to provide highly-detailed cast door locking bars, latching mechanisms, door bumpers and angled bar lifter.
HO White Striping - 1 and 2 Inch Widths - Decals
Description: (formerly 87-124-1) Stripes - 1 and 2 inch widths - White
HO United Petroleum Refining - Kit
FEATURES:
- Easy-to-build plastic kit
- Fits diesel-era layouts
- Main fractionating tower
- Furnace, piping and heat exchanger details
- Combine multiple kits for a larger complex
- Decal warning signs
- Molded in appropriate base colors
MEASUREMENTS:
13-1/2 x 8-1/4 x 15 inches
HO Hyundai 48ft Exterior Post - BNSF/HUB Group #684226
PROTOTYPE TYPE:
48ft Exterior Post containers were introduced in 1986 and were a common site on nearly all double stack container trains of the later 80s, 90s, and 2000s. These containers were used for domestic freight service and were purchased by numerous railroads and freight operators in large numbers. These containers were a unique design in which the front and side container panels were supported by aluminum channel posts mounted outside of the container box to provide additional capacity space for larger pallet stacks within the container interior. The posts are a simple spotting feature for these styles of containers. Hyundai was one of a handful of manufacturers of exterior post containers, and while nearly-identical in design to one of their competitors, the additional drainage channel on the top of the container at the head end, and full-height end corner posts differentiate this container from its competitors design. Some of these containers served secondary lives for more than one operator, leading to some interesting graphic combinations over their lifespans. Changes to over-the-road length allowances for 53ft containers and trailers brought about the eventual demise of the 48ft container and a majority of them were withdrawn from service during the mid-2000s and beyond, though limited numbers still remain in service today.
FEATURES:
Hyundai Roof Configuration Version:
A unique feature of the Hyundai design was the additional water drainage channel near the front end of the container and the forward vertical framing members that extended the full height of the container. We have modeled the detail that differentiates this container from those of other manufacturers of 48ft exterior post containers.
Sharp And Accurate Paint And Lettering:
Classonemodelworks.com provides accurate paint and lettering taken from photographs of the prototype, and numbering that matches the class numbers for each operator or railroad. Our containers come with the exterior posts already painted to match the aluminum color of the prototype containers and galvanized coloring for the upper and lower structural channels.
Accurately Dimensioned:
These containers have been accurately reproduced from hand-measured field dimensions of the actual containers, right down to every visible detail. Classonemodelorks.com stands for accuracy and we strive to provide that with every model we produce.
Accurate scale Door latching Details:
Classonemodelworks.com believes in providing models that accurately depict the prototype equipment. Keeping that as our core, we are proud to provide highly-detailed cast door locking bars, latching mechanisms, door bumpers and angled bar lifter.
HO 48ft Spread Axle Highboy Trailer
HO RTR 50Ft ACF Exterior Post Boxcar - CSX Transportation #130039
Product Information
Serve shippers on your HO railroad with these WalthersMainline 50Ft ACF Exterior-Post Boxcars. Responding to a growing shortage of serviceable cars, ACF and other builders unveiled a new generation of bigger equipment in the 1970s with increased width and height to improve carrying capacity. Today, theyre still in service for Railbox and many other roads, where they can be found moving all types of cargo. Features of these models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes seen from coast-to-coast 1974 to the present
Handles all types of general freight loading
Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
41Ft 3inch Truck Centers
15Ft 2inch Tall
10Ft 8inch Wide
Fully assembled
Correct 33inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 50ft 6in Boxcar - CSX #136023
Features:
- Prototypical non-terminating corrugated ends
- Diagonal paneled roof
- Single 10-foot YSD design sliding door (non-operating)
- Detailed cross-member attachment rivets on the side sills
- Weighted, detailed underframes
- True scale dimensions with accurate details
- Equipped with AccuMate knuckle couplers
HO 50Ft PS 5277 Box - Lake Superior and Ishpeming LS&I #2708
MODEL FEATURES:
Single 10Ft Pullman Standard door
Separately applied grab irons, end ladders, and brake wheel
Photo-etch coupler cross-over platform
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
All Scale Classic Trees - Ready Made - Cherry Blossom Trees, 1-3/4 - 2-1/4 inches (3pk)
Cherry Blossoms are deciduous trees that thrive in sunlight and temperate climates. These trees are commonly found all over the Northern Hemisphere. Cherry Blossoms are easily recognized by their pink or white flowers that bloom in the spring. Use a combination of types and sizes of trees throughout your layout for superior realism. Trees have a planting pin and an optional detachable base for temporary placement.
HO EMD FT A+B Set - DC/Silent - AT&SF (Freight Scheme) #100L + 100A
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO Motorized 90ft Turntable - 13-3/4 Inch Overall Diameter
Sure to be the focal point of any HO scale engine terminal, this Walthers Cornerstone 90ft motorized turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, most smaller turntables were placed adjoining the roundhouse and servicing tracks. This 90 ft turntable is large enough to turn typical locomotives as large as a 2-8-2 Mikado or 4-6-2 Pacific. It will look great at smaller terminals, at junctions, and anywhere else steam locomotives must be turned.
TURNTABLE FEATURES:
- Typical of tables built from 1900s on - some still in service today
- Fits most engine terminals
- Holds locos up to 12-3/8 inches long
- User-friendly, illustrated instructions simplify operation and programming
- Layout mounting templates for pit and Cornerstone Turntable Control Box
- Control Box included for use on layouts with DC or DCC train control
CONTROL BOX FEATURES:
- Programmable indexing for up to 99 different tracks
- One-touch 180-degree bridge rotation in either direction
- Simplified LED display with adjustable brightness
- Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately)
Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately)
Atlas - N Scale GP-9 TT - Gold DCC Sound - Grand Trunk #4921
Features:
Powered low friction drive
Blackened metal wheels
Dual brass flywheels
Directional lighting
Golden-white LEDs
AccuMate couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
AccuMate couplers are made under license from AccuRail, Inc
Modern Freight Cars by Jeff Wilson
In Modern Freight Cars from Kalmbach, noted modeler and former Model Railroader Magazine staffer Jeff Wilson provides an overview of freight cars from the 1960s through today. This is an essential guide for model railroaders who model the 1960s through today, as well as railfans and freight train enthusiasts. The book features more than 200 photos and covers various types of cars, including boxcars, hoppers, and gondolas, and how they evolved, as well as new car types, including intermodal cars and 89-foot auto tracks. Modern Freight Cars: Rolling Stock from the 60s Through Today also gives a deeper look into how different industries use freight cars, when cars entered service, and the dates when rules and restrictions took place. Other topics include:
Freight car evolution (size and weight increases; new car types)
Car components (brake systems, trucks, and couplers)
Hi-cube and specialty boxcars
Intermodal cars (flat, spine, and well cars)
Open and enclosed auto racks
Mechanical and cryogenic refrigerator cars
Center-beam flatcars
And much more!
Talus - Coarse Gray (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings and or road cuts. Intermix grades and blend shades for the most realism. Color Natural Talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle Talus and secure with Scenic Cement (#191).
Particle size- Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
Evergreen Scale Models - Opaque White Polystyrene Channel .080In x 14In (4 pcs pkg)
HO 36ft Old-Time Wood Boxcar - Missouri, Kansas, & Texas #75598
HO Intermountain 4-Panel Coalporter, Canadian National
CNA Website scheme
Features:
Sharp Painting and Lettering
Prototype Accurate Paint Schemes
Multiple Road Numbers
InterMountain 100 Ton Trucks with 36in Metal Wheelsets
Metal Knuckle Couplers
HO FMC 5503 Double Door Boxcar - St. Maries River Road #52032
Features:
Double Sliding Doors
Wire grabs
Etched parts
Plate C Box Car
X-Panel Roof
HO MLW M420 - DC/DCC Ready - Canadian National (North American Scheme) #3561
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
White River Productions - Model Railroad News, December 2023 - Magazine
PRODUCT NEWS:
- Locomotives & Rolling Stock
- Vehicles & Loads
- Structures, Scenery & more
- Books & more
HO-Scale Reviews
- Iconic New York Central Power Bachmann J3a Hudson 4-6-4 Steam Locomotive
- Lightfooted RS-11 Rapido Trains Central Vermont RS-11 Diesel Locomotive
- Wide-Vision Celebrates 50th Athearn Roundhouse BN Caboose
- Bulk Up Canadian Style Walthers Proto CC&F Bulkhead Flatcar
- What If Burlington Had Not Seen Red? Broadway Limited Imports GP20 Diesel Locomotive
Verde AC4400CW ScaleTrains Ferrosur AC400CW Diesel Locomotive
- New Trinity Covered Hopper Walthers Mainline 4750 Covered Hopper
- FMC Double Door Rides Again Atlas FMC 5077 Union Pacific Boxcar
- Record-Breaking Mallard Hornby America Starter Train Set
- Celebrated Convertible Brekina 1975 Cadillac Eldorado
- They Are Everywhere! Walthers Cornerstone The Bargain Depot Kit
N-SCALE REVIEWS:
- Green Machines InterMountain Railway Co. MKT F7A/F7B Diesel Locomotives
O-SCALE REVIEW:
- ACF Two-Bay Hopper Atlas Premier Great Northern CenterFlow Hopper
BOOK REVIEW:
- Classic Armour Yellow Era Four Ways Wests Union Pacific Color Pictorial 1950s?1980s
COLUMNS & DEPARTMENTS:
- Editorial and Letters
- Prototype Profile: General Electric C30-7 and C36-7
- Timetable
- From The Archive: HOs Original GP40s
- Dealer Directory
- Advertising Index
HO Evans 53Ft Double Plug-Door Boxcar - Ralston Purina (As Delivered) #142
Features:
70-ton roller-bearing trucks
Blackened metal wheels
Two-piece underframe
Separate brake cylinder
Air reservoir
End platforms
AccuMate couplers
AccuMate couplers are made under license from AccuRail, Inc.
N Scale Track-Bed - 24ft Continuous Roll
Track-Bed Roll offers a smooth application. It deadens sound, requires no pre-soaking like cork, remains flexible and will not dry out or become brittle. Aligns well with cork or Homasote applications. Also works great for H0n3 and Hon30 gauge.
Install easily with Foam Tack Glue (#1444). Pin in place with Foam Nails (#1432).
1 roll/pkg- 1/8 inch depth x 1-1/4 inches wide x 24 feet long
HO AutoFlood III RD Coal Hopper - CEFX #600555
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
W&LE #78007
MODEL FEATURES:
Wire and plastic handrails, stirrup steps, ladders and underbody details
Separately applied brake gear including brake wheel, air reservoir, and brake cylinder
Bettendorf or roller bearing trucks with 33In machined metal wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers
Painted and printed for realistic decoration
Weighted for trouble-free operation
Interior plastic blister safely holds the model for convenient storage
Window packaging for easy viewing
Fully assembled
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
The development of the hopper car went along with the development of automated handling of such commodities, with automated loading and unloading facilities.
Open hopper cars are used for commodities such as coal, which can suffer exposure with less detrimental effect. Hopper cars have been used by railways worldwide whenever automated cargo handling has been desired.
Evergreen Scale Models 4080 .080in Opaque White Polystyrene V Groove Siding (1sheet)
N Scale EMD SD70ACe - Paragon4 Sound/DC/DCC - UP (Missouri Pacific Heritage Livery) #1982
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up (except for rubber traction tire)
- ABS Plastic Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, and Cut Levers
- Prototypical Light Operation with Separately Controllable Headlight, Rear Light, Cab Light, and Front Ditch Lights
- Prototypically Accurate Sounds for an EMD SD70ACe Locomotive
- Microtrains-compatible Couplers (2)
- Will Operate on Code 55, Code 70, and Code 80 Rail
- Minimum Operating Radius: 9.75 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
HO Galvanized Culvert Pipe - 60 Inches (2pk)
Specifications
Scale: HO (1:87)
Sizes: 0.69 inch
Length: 3.4 inches
Galvanized steel culvert pipes have been around for over a century and serve many purposes from storm sewers to drain pipe and even irrigation. Found where roads or railroads cross low lying areas, streams, or other waterways, these galvanized pipes provide a pathway for water to flow while reducing erosion at these critical crossings.
Suitable for any era, these galvanized culvert pipes will look right at home on your layout. Each HO-scale pipe section is 25 scale feet long and comes in a variety of diameters, suitable for many different applications. Hollow throughout, each pipe features realistic corrugations both inside and out.
HO 53Ft Gunderson Husky-Stack Well Car & Containers - Arkansas & Oklahoma AOK (3pkg)
Road Numbers Include;
73503
73545
73609
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
HO Scale - 1951-55 White Freightliner Tandem Axle Day Cab Tractor - Unpainted and Resin Cast Kit
Woodland Scenics Static Grass 613 2mm Dark Green
HO Straight Track (5-7/8 inches)(2pk)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes. Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation! Suitable for all types of layouts, whether temporary or permanent. This modular track system features an integrally molded roadbed for realistic appearance. Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
HO 68Ft Bulkhead Flatcar - TTX (Forward Thinking) #804309
Features:
Side stake pockets
Simulated tie-loops
Fishbelly center-sill
Prototypical pull-plates and lift rings
Code 83 - 19 Degree Crossing
B-100-40 Boxcar: Golden West - Ventura County - Single Car #140011
Detail Variations:
6-pack includes the following numbers:
#140000
#140003
#140008
#140011
#140013
#140016
Our B-100-40 model features the following details:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Genuine Kadee #158 Whisker couplers
Newly tooled trucks with turned metal 36 Inch wheels
Separate door rods and door tracks
Road number specific number patches
Separately applied coupler cut levers
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.188 (10pcs pkg)
HO 36ft Old-Time Wood Boxcar - Missouri, Kansas, & Texas #75590
HO Passenger Car Trucks 41-N-11: 4-Wheel, Inside Swinghanger (1 pair)
B-100-40 Boxcar: Golden West - Ventura County - Single Car #140003
Detail Variations:
6-pack includes the following numbers:
#140000
#140003
#140008
#140011
#140013
#140016
Our B-100-40 model features the following details:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Genuine Kadee #158 Whisker couplers
Newly tooled trucks with turned metal 36 Inch wheels
Separate door rods and door tracks
Road number specific number patches
Separately applied coupler cut levers
EP-5 Electric Loco - DCC & Sound - New Haven, Delivery #373
Detail Variations:
With Vents
HO Model Features:
Accurately scaled from prototype blueprints
Period-correct detail options, including carbody, pantograph and hardware variations
Accurate paint and lettering
Several road numbers per paint scheme (where applicable)
Full cab interior
New Haven delivery and repaint schemes (repainted units have smaller NH logo on nose and re-positioned/larger nose road number)
Directional operating pantographs (sound models only)
DC/Silent or DC/DCC/Sound versions available
DC/DCC/Sound version features an ESU Loksound decoder with accurate -Jet- recordings
Complete lighting package including headlights, class lights, ground lights and cab interior lighting
Factory-installed MacDonald-Cartier metal couplers
North American-Style Code 83 Hayes Bumper 2-Pack
HO Scale
Light Rust Deposits
The perfect product to recreate a rust texture in a light rust color in surfaces of vehicles or accessories. Once they are dry, they have the same scale appearance as real crusted rust. The finish is extremely authentic and can be combined with other tones for more realism.
HO Scale - 1966-77 Chevys 9500 Low Mount Cab Tandem Axle Short Hood Tractor - Unpainted and Resin Cast Kit
HO Coalveyor Bathtub Gondola - David Joseph (Blue) #30918
FEATURES:
Die-cast chassis
Ready-to-run
Interior bracing
Removable coal load
AccuMate couplers
Brake detail
100-ton roller-bearing trucks
Fine scale wheels
Accurate painting and printing
These cars were usually run in blocks of 4-12 units, carrying
construction and demolition debris.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX (6 pkg) #17
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
6
18
33
56
66
78
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO RTR 57Ft Trinity Spine Car - 3 Car Set - TTRX/Faded #361041
ETA: November 2022
Detailed Information
MODEL FEATURES:
Precision die-cast metal spine structure
Etched metal walkways
Separately applied brake piping
Fine ladder detail
Weighted for optimal performance
McHenry scale knuckle spring couplers installed
33inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Trailer hitches come separately in raised and collapsed configurations so the customer can apply them to the model to suit their preferences
Minimum radius: 20inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO 70-Ton 12-Panel Hopper - Pennsylvania (H39A Block Lettering) #280002
PRR Built with Crown Trucks
Blt.8-62
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO Canadian National Diesels (1995+) - Hoods & Switchers - Decals
Circa: 1995+
Scale: HO Scale
Equipment Type: Diesel - Hoods & Switchers
Description: Canadian National Diesels (1995+)-Diesel - Hoods & Switchers - Waterslide Decal
GMD SD40-2f - DCC & Sound - CP (Round Porthole Sill Dashes) #9023
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
Acrylic Glossy Colors - Clear Red - 3/4oz (23mL) Bottle
X-27
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
36 inch Long Music Wire - .032inch Diameter pkg(4)
#4800 Tube and Wire
A staple of many scratchbuilding projects, K&S Engineering Music Wire is available in many different diameters and lengths. This steel wire is easily bent using pliers and other conventional hand tools. Perfect for use as handrails, grab irons, simulated piping, mounting pins for scenery and structures and more.
HO Laser-Cut Acrylic Wheel Masks for Intermountain/Reboxx 36 Inch Wheels
These paint masks are precision cut to fit popular high quality HO scale wheel sets. It not only keeps paint off of the wheel treads leaving just the front and back wheel faces and axle exposed for color, but keeps the modeler?s hands clean as well. The mask will hold four axles and, once painted, each of its fingers can be individually pulled apart to release one wheel set at a time. Unlike cardboard masks, these will last for years! The mask is easy to assemble from 5 clear acrylic parts; a plastic solvent glue is all that is required.
60ft Pullman-Standard Flatcar - Ready to Run -- TTX VTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 50ft 6in Boxcar - CSX #136043
Features:
- Prototypical non-terminating corrugated ends
- Diagonal paneled roof
- Single 10-foot YSD design sliding door (non-operating)
- Detailed cross-member attachment rivets on the side sills
- Weighted, detailed underframes
- True scale dimensions with accurate details
- Equipped with AccuMate knuckle couplers
HO Scale 89ft Channel Side Flatcar - Trailer-Train/JTTX #930124
(yellow, black; General Service)
Built especially for the bigger trailers entering service in the 1960s, this Walthers Mainline model of the 89ft channel side flatcar is a must for period intermodal modeling in HO scale. Based on the F89F flatcars owned by Trailer Train and many railroads, over the years these cars carried 28, 40, 45, 48, and 53ft trailers.
FEATURES INCLUDE:
- One time run of these road-numbers, limited quantity available!
- Heavy die-cast metal underframe for great performance empty or loaded
- Used in piggyback and other service 1963 to the present
- Prototypical C-shaped steel channel side sills
- Detailed brake gear
- Swinging coupler pocket for 18 inch radius curves
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Features classic vintage architecture, an expertly weathered stucco-over-brick exterior, tall arched windows, gilded kick plates on front doors, a decorative tile facade and carved wood trim. Includes window treatments and decals. The building features a first-floor printed interior and two warm white LED lights - a lighted marquee and one interior light.
The installed LED lighting is compatible with the Just Plug(TM) Lighting System. 50mA RoHS compliant
Measures:
2-1/4 x 2-3/4 x 2-13/16in
5.7 x 7 x 7.1cm
HO Bathtub Coal Gondola - MLMX/ Sims Metal #371
Built: 10-08
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
Expand container traffic on your 1960s and 70s era HO layout with this series of authentic models from - SceneMaster, featuring:
- Standard end-door and right-side door versions as appropriate
- Authentic rivet, door latch and hinge details
- Colorful period schemes
- Perfect period loads for WalthersMainline G85 and 60ft Pullman-Standard VTTX container flatcars (each sold separately)
N Scale Flexible Roadway - Gray Country Road (100 x 2.9 cm)
(divided into 2 rolls)
Pre-colored, self-adhesive material in a variety of authentic colors and surfaces to create custom roads.
Approx. 3-1/4 feet long.
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
HO RTR 68Ft Railgon Gondola - CSXT #491015
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
Spray Can - NATO Green (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO EMD SW9 - DC/ Silent - Santa Fe (ATSF Bookend Scheme) #2435
Santa Fe:
Delivered in 1953
Unique stepped louvers on hood
-Trash can- style spark arrestors
Large cab sunshades on front and rear cab windows
Carbody handrails
Working Pyle 360 warning light
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO NSC 60ft Ingot Flat Car - RTAX Liberty Railway Services
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
HO Rotary Snowplow & F7B Locomotive - DCC Ready - Northern Pacific NP #42/#42-B
ROTARY SNOWPLOW FEATURES:
Electrically driven motor to operate the rotary blades
Clear plastic cab and/or portal windows
McHenry operating scale knuckle couplers on rear of the snowplow
Highly-detailed, injection-molded body
Fully-assembled and ready-to-run out of the box
Painted and printed for realistic decoration
Highly-detailed, injection-molded body
Minimum radius: 18inch
Recommended radius: 22inch
F7B LOCOMOTIVE FEATURES:
5-pole motor with precision-machined flywheels and multi-link drive train for trouble-free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Heavy die-cast frame for greater traction and more pulling power
Clear plastic portal windows
McHenry operating scale knuckle couplers
DCC Ready 21 pin plug
Machined metal wheels with RP25 contours
Fully-assembled and ready-to-run out of the box
Painted and printed for realistic decoration
Highly-detailed, injection-molded body
Minimum radius: 18inch
Recommended radius: 22inch
RTR 67Ft Trinity 6351 4-Bay Covered Hopper - ADM
Product Information
Expand grain traffic in minutes with layout-ready WalthersProto(R) 67Ft Trinity 6351 Four-Bay Covered Hoppers! Introduced in the early 2000s, these large-capacity cars are industry favorites for handling dired distillers grains (DDG), malt and many other food products. Other features of these HO Scale replicas include:
Limited edition - one time run of these roadnumbers!
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct 36Inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO - Nathan K5LA 5-Chime Air Horn w/Shields - Lost Wax Brass Casting
Gunderson Multi-Max Auto Rack - CP SOO
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
HO NSC 3800 Covered Hopper - TH&B (Delivery Scheme) #1515
They are back, again! The famous Rapido 3800 cu.ft. Cylindrical Hoppers make a triumphant ~THIRD~ return with new road numbers and paint schemes!
FEATURES INCLUDE:
- Round-hatch or Trough-hatch design
- Correct Dofasco S-2 100-ton trucks
- Two body variations with 6- or 11-side panels
- Three brake equipment variations and optional additional air reservoir on NSC cars (if applicable)
- Etched running boards and brake crossover platform
- Factory-installed air pipes and coupler cut levers
- Finely molded plastic walkway supports and end cages
- Full separate air piping and brake equipment details
HO Layouts for Every Space - Book
This book contains 11 challenging HO layouts for unusual spaces, both large and small. Each plan is accompanied by complete instructions on benchwork, tracklaying, wiring, scenery and more. Intermediate to advanced skill levels! If you are looking for layout track plans and beginners advice, check out this Atlas book!
HO 4-8-4 Class FEF-2 - Sound/DC/DCC with Smoke - Union Pacific TTG w/Aluminum #827
The Northern type locomotives on the Union Pacific were built by Alco Schenectady Works in 3 classes between August 1937 and December 1944. The first class, designated FEF-1, for Four Eight Four, comprised numbers 800-819. Fitted with 77-inch drivers and a 300-pound boiler pressure, UP was impressed by their performance and took delivery of 15 additional 4-8-4 locomotives in Aug-Oct 1939, numbers 820-834. These locomotives were equipped with 80-inch drivers and larger 14-wheel centipede style tenders with a 23,500 gallon capacity and were class FEF-2. In Dec 1944, 10 additional 4-8-4 locomotives were delivered, these equipped with low-backpressure double stacks, numbered 835-844, and designated FEF-3. All three classes developed 63,800 lbs of tractive effort.
Throughout their service careers multiple modifications were made, including conversion to oil, feedwater heater systems, addition of smoke lifters (designated Wind Wings on UP drawings) and a Mars light, and replacement of stacks from singles to doubles and even triple stacks. UP 844, the final steam locomotive delivered to UP, has been in continuous service on Union Pacific since it was built in 1944; renumbered from UP 844 to UP 8444 between June 1962 and June 1989.
In this production, BLI is modeling the FEF-2 Class and also the #844 with its Mars Light. Notable features are listed below:
Accurately modeled FEF-2 double stack and triple stack - prototypically accurate for each road number
Accurately modeled turret casing
Individual side rods
Centipede-style oil tenders with finely detailed oil inserts. #844 has the Heritage Fleet containment dam, other road numbers do not.
Options for Worthington and Sellers FWH
Wind Wings on models where prototypically accurate
Prototypically accurate FEF-2 front end and pilot (except #844)
Walschaerts Valve Gear
#844 as it ran from 1989-2013, with Mars Light
HO Scale G2 AC4400CW - DCC & Sound - Union Pacific #6289
Detailed Information
UP FEATURES:
Primed for Grime
GPS pod
Replaced AC unit in UP yellow
Regular spare knuckle holder on rear pilot
The Union Pacific acquisition of the Southern Pacific in 1996 saw the transfer of SP newly acquired AC4400CWs to a new railroad. As they were essentially brand new, there was no push to repaint these units and they existed for several years without modification. Eventually the AC4400CWs were renumbered with simple patches over the SP paint, but as this was done on a unit-by-unit basis where they were, the patches all had a measure of uniqueness.
ROAD NUMBER SPECIFIC FEATURES:
#6193
Formerly SP 138; Wears two UP shields on the nose (sometimes referred to as cheek shields), UP shield on rear patched in yellow reporting marks in grey faded grey and red to represent the significant sun-bleaching these units received.
#6289
Formerly SP 289; Infamous -Flaming Patch-Job- unit with a distinctive stylized flames on rear of locomotive, Single UP shield over faded SP logo on front yellow sill stripe modern PTC Antenna boxes.
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO GMD SD40-2W - DCC & Sound - CNNA (Non Dynamic Map/ Oper. Strobe Lites) #5362
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
HO Modern Yard Tractor - Atchison, Topeka, & Santa Fe #5344
Completely assembled
Many separately applied parts
Interior details
Rubber tires
Photo-etched steps and rear deck
Adjustable 5th wheel height
Clear window glazing
As seen in intermodal yards around the country
PROTOTYPE AND BACKGROUND INFO:
A terminal tractor, also known as a yard tractor, is a kind of semi-tractor intended to move semi-trailers within a cargo yard, warehouse facility, or intermodal facility, much like a switcher locomotive is used to position railcars.
HO 20K Gallon Acid Tank Car - GATX #23082
Era: 1991-2009, 2010-Present Day
MODEL FEATURES:
- Multiple road numbers
- Many separately-applied details
- Etched metal walkways
- Different top platforms as appropriate per prototype
- Different brake systems as appropriate per prototype
- Separate wire grabs and handrails
- Trucks with animated rotating bearing caps
- Minimum radius: 18 inches
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Body-mounted, McHenry scale double-shelf knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod
details
- Machined metal wheels with RP25 contours operate on all popular brands of track
PSC Transfer Van - Canadian National #76568
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
Tear & Plant Meadow Mat - Summer Meadow
DIMENSIONS:
8-5/8 x 7-7/8 inches (21.9 x 20cm)
FEATURES:
- Can be used for HO, N, O or larger scales
- A realistic grass meadow in minutes!
- Easily cut or torn into smaller pieces or to fit you available space
- Great for adding long grass to medium and large areas
- Flexible for easy use on uneven terrain
- Ready to use
- Varied colors and flocking for added realism
- Includes 10 individual grass tufts too!
- Flexible transparent base blends into existing scenery
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14087
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
-Factory installed Celcon handrails
-Individually applied wire formed grab irons
-5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
-See-through cab windows
-DCC Ready 21-pin NEM plug
-LED Illuminated front and rear headlights
-Nickel plated, blackened machined wheels
-Wheels with RP25 contours operate on all popular brand of track
-Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMD’s most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
Intermountain Railway Company 14-Panel Coalporter(R) Coal Gondola Mitsui Rail Capital MBKX (silver, blue)
#300951
N Scenic Accents(R) N Scale -- Welders & Accessories
Bring your layout to life with N scale Scenic Accents figures and accents that tell your layout story with authentic detail.
HO AutoFlood III RD Coal Hopper - PGNX #1153
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Walthers SceneMaster All Scale - Tear and Plant Bushes - Light Green
Measures 7-7/8In x 9In 20 x 23cm
Product Information
SceneMaster ready-to-use Tear and Plant products are perfect for adding grass in large areas. Available in a variety of styles and seasonal colors to add realistic vegetation to any layout from Z to G Scale, ready-to-use mats are flexible to fit uneven terrain and are easily cut or torn to fit available space. Use Tear and Plant Grass Mats along with other SceneMaster scenery materials to add realism to your layout!
Realistic plants in minutes - requires no special skills!
Easily cut or torn into smaller pieces or to fit available space
Great for adding a realistic variety of plants to any area
Flexible for easy use on uneven terrain
Ready to use
Varied colors and flocking for added realism
Flexible transparent base blends into existing scenery
N Scale Flexi Flo Hopper (Late) - CR (Conrail Repaint) #897684
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Penn Central Rack, Trailer Train Flatcar (TTBX) #961930
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504977
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
HO Scale H1a Hudson Steam - DC/DCC Ready - Canadian Pacific (Spans the World) #2808
-Late walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO RTR FMC 3-Bay 4700 Covered Hopper - Western Pacific #12099
Detailed Information
MODEL FEATURES:
Separately applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, brake cylinder and triple valve
100-ton trucks with 36inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
Factory applied roof walk, roof hatch, end details, ladders and wire grab irons
Two outlet grate variations
Accurately painted and printed on a highly detailed, injection molded body
Window packaging for easy viewing
Minimum radius: 18inch
See-through etched metal end platforms
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Interior plastic blister safely holds the model for convenient storage
All 3-packs feature unique road numbers
HO Enterprise 2-Bay Covered Hopper - New York Central (NYC Gothic) #881239
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20372
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Battery Case
Use as an alternative to the Just Plug Power Supply to power Light Hubs, Sequencing Light Hubs and Expansion Hubs.
-Two 9-Volt batteries not included
Enamel Product.
A new high quality enamel product, developed for scale aircraft models, with an improved flow for easy creation of depth, and emphasis of surface detail. Forget complex mixes or infinity of colors. This product is perfectly suitable for aircraft models which are painted in a black color.
HO Enterprise 2-Bay Covered Hopper - New York Central (NYC Gothic) #881850
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO Built-&-Ready Landmark Structures - Ethyls Gas & Service
Product Information
This vintage gas and service station with its open-beamed overhang, the old globed gas pumps, decals, signage and scene-setting detail is loaded with charm and nostalgia. Details include trash cans, an old bench and chair, cola machine, ice machine and pallets of old junk and car parts. The fenced outdoor service area features an oil-stained concrete floor, a lift, free-standing kerosene tank, old tires, dolly, pole lights and loads more.
HO NSC 5304 Boxcar - Canadian National (Delivery w/ Green Door) #557303
The Rapido NSC 5304 cu.ft. CN Combo Door Boxcar features:
Separate grab irons installed at the factory
100-ton Barber S-2 trucks, with metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe
Tsunami 2 TSU-pnem Digital Sound Decoder for Baldwin & Other Diesels Sounds
1-1/16 x 13/32 x 3/16 inches - 27 x 10.5 x 5mm
Prime Movers - Rio Grande Southern Galloping Goose, Dual Whitcomb, Fairbanks-Morse, GE GTEL UP Slab Side, GE GTEL UP Veranda, GE GTEL UP Big Blow - A unit, GE GTEL UP Big Blow - B unit, Cummins QSK19C x3 GenSet
9 Pin board
The TSU-PNEM is a 9 Pin sound decoder suitable for use in many manufacturers models such as those made by Atlas Athearn and InterMountain Models. It is suitable for a wide variety of models from HO to S scale.
9 EMD Prime Movers
Dimensions: 30.5 x 15.5 x 6.5mm
Max. Motor Stall Current: 2A
Function Outputs: 6
Max. Function Current: 100mA (each output)
Audio Amplifier: 2 Watts, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
16-bit Digital Sound
1A Motor Stall Current
Over 50 Sound Effects with Selectable Reverb
Functioning Engine, Train and Dynamic Brakes
Reactive Dynamic Digital Exhaust
6 Function Outputs with over 20 Hyperlight Effects
Hyperdrive2 Advanced Motor Control
DCC Track Voltage 7.5V – 22V
No speaker included
HO Fieldstone Barn Base & Ramp - Kit
Product Information
The Walthers Cornerstone Fieldstone Barn Base and Ramp is a perfect complement to the Walthers Cornerstone Meadowhead Barn (933-3330). This foundation kit is typical for rural buildings placed on hilly ground and the ramp allows easy access to the barn for equipment or animals. This accessory kit comes in unpainted cast resin and features detailed rockwork, molded doors and windows cast in place. The Fieldstone Barn Base and Ramp is easy to assemble and can be painted using compatible hobby paints.
Easy-to-build resin kit
Doors and windows cast in place
Includes foundation walls and separate ramp
Fits Meadowhead Barn (933-3330 sold separately)
Measures:
Base: 6-3/8 x 4-3/16 x 1-1/16inch (16.1 x 10.6 x 2.6cm)
Ramp: 3-1/2 x 2-1/2 x 1-3/16inch (8.8 x 6.3 x 3cm)
HO EMD SD70M-2 Diesel - DCC & Sound - New Brunswick Southern Railway (Maine Northern) #6405
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
NBSR FEATURES:
Former NS units
Front and rear ditch lights
PTC antennas
The New Brunswick Southern Railway is a Canadian short line which, combined with its sister company Eastern Maine Railway, connects Saint John, New Brunswick, with Brownville Junction, Maine. A sister company, Maine Northern Railway operates a separate 258 mile line. In 2021, a group of six former Norfolk Southern SD70M-2 locomotives arrived on the property. Painted green and yellow, each component roads
name is on two locomotives; all are owned by the New Brunswick Southern.
ROAD NUMBER SPECIFIC FEATURES:
#6401 New Brunswick Southern lettering
#6402 New Brunswick Southern lettering
#6403 Maine Northern lettering
#6404 Maine Northern lettering
#6405 Eastern Maine Lettering
#6406 Eastern Maine Lettering
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Rock Molds Boulders
Highly detailed, flexible and durable rock molds can be used to cast small boulders, rock outcroppings, top rocks for fields and creeks, or make entire rock faces by combining castings produced with these molds.
Use this mold to make big rocks, used at quarry sites, mining operations, road cuts and more. Mold is flexible and reusable.
5inch x 7inch (12.7 cm x 17.8 cm)
HO SD70M - DCC & Sound - EMDX/Maroon/Black #7018
Detailed Information
EMDX FEATURES:
Solid maroon/black scheme
Large EMD front plow
Round EMD style front ditch lights
Can-style roof antenna
Early EMD trucks with hidden bearings
During 1995, EMD built 22 SD70Ms for their lease fleet, including 3 official demonstrators built in 1992. Painted in 2 schemes (solid EMD maroon and black, and maroon, grey and silver), EMD was able to provide many different railroads to test and compare their new 710 prime mover to other current models. These could be seen all over the US and added a splash of color when mixed in locomotive consists. By the early 2000s, they were sold to CSX and eventually painted into CSX colors.
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO CA-9 ICC Caboose w/Lights DCC Ready - Union Pacific #25668
ETA: August 2021
Detailed Information
PROTOTYPE AND BACKGROUND INFORMATION
Built by International Car Company in 1967, UPs CA-9 class numbered 100 cabooses. The cars were very similar to the earlier CA-8 and later CA10 designs, but had minor differences in end cages and windows. The cars originally featured square safety slogans, and these were later changed to rectangular slogans. The eye-catching safety slogans made the cars distinctive; the later slogan boards were removable and could be swapped from car to car, meaning that certain road numbers wore several over the course of their lives.
ROAD NUMBER SPECIFIC FEATURES:
#25658, 25668, 25661 Early slogans, P on cupola representing Pool service,unique scheme with 14 inch reporting marks and 8-inch -Union Pacific-, as- built or modernized cupola windows as appropriate
#906251 MOW Office car, painted -Kenefick green,- Era: 1990s+
#25629, 25616 Later rectangular slogan boards, red P on cupola representing Pool service, modernized windows, Era: late 1970s+
N Scale FP45 - DCC & Sound - SF/Kodachrome #5991
Detailed Information
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
McHenry scale knuckle couplers
5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
LED headlight
Heavy die-cast frame for greater traction and more pulling power
Jewel case blister packaging securely holds for the model
Replacement parts available
Non-skid end walks
Fine-scale end handrails for scale appearance
Detailed and painted cab interior with control stand
4,000 gallon fuel tank
Flexicoil-C sideframes with high brake cylinders
Flush mounted portal window glass
Snow plow or plate welded pilot
Minimum radius: 9 3/4Inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
HO RTR ACF 4650 3-Bay Hopper - Great Northern #171728
Date: 11-66
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO FMC 60ft Hi-Cube Ex-Post Boxcar - GTW #384700
MODEL FEATURES:
- Single 10ft Youngstown door
- Separately applied grab irons, end ladders, and brake wheel
- Photo-etch coupler cross-over platform
- Highly-detailed, injection-molded body
- 36 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Minimum radius: 18 inches
HO 70 Ton 13 Panel 3-Bay Hopper Car - Pennsylvania (H37B w/ Crown Trucks) #272209
Ready to Run.
Features:
Crisp details and sharp painting and printing,
metal wheels and knuckle couplers
1st time offered with the correct Trucks
Morning Sun Books Inc. Chesapeake & Ohio Power In Color Volume 2
Stephen Timko
The massive fleet of over 560 GP7s and ?9s, to the modest purchases of Baldwin and Alco models, including the late first-generation SD18s are featured! Includes the Pere Marquette-ordered EMD BL2s.
HO Code 83 Nickel Silver - Bridge Track End Piece Set
Track is the most important model on your HO scale layout, and Walthers Track makes it easy to create realistic mainlines, sidings, and more with Code 83 rail!
Combining great looks and great performance in a complete system, each item comes fully assembled and features:
- Thin profile ties in realistic dark brown with enhanced wood grain detail
- Fine profile molded spike and tie plate details on each tie
- Spike-mounting holes positioned next to the rail
- Molded starter points on underside of ties for fasteners
- Custom formulated nickel silver rail for outstanding electrical conductivity
Set includes:
- Two Bridge Track End Pieces
- Two end piece -wood- Filler Ties
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #6
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO AutoFlood III RD Coal Hopper - PGNX #1132
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Early - Staley #35058
HO Scenic Accents(R) Figurines -- Miners pkg(6)
HO 34Ft Ribbed Hopper - Pennsylvania (4 pkg) #1
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Removable coal load in each car
Machined metal wheels
Mchenry scale knuckle spring couplers installed
A total of 9 different road numbers available for each road name
Minimum radius: 15inch
Gunderson Multi-Max Auto Rack - CSX
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
Lichen Medium Green
Small Bag - 86.6 in³ (1.41 dm³)
Natural lichen blends in a variety of colors and textures when combined with other Woodland Scenics landscape products, such as Turf and Foliage.
HO The Shops w/Add-On Office - Kit
This kit is designed with cut lines on the back side of the walls so that door and window locations are optional. Kit includes doors, windows, roof vents and down spouts.
Dimensions: 70 X 80 Scale Feet / 9-11/16 X 11-1/16 inches
Centerline between doors: 20 Scale feet. 2-3/4 inches
SubTerrain System - 4% Incline Starter Set
4/pkg - each piece elevates from 0 - 1 inch within 24 inches and measures 2-1/2 inches wide x 24 inches long
Incline Starters are wedges of high-density foam used to start your track on an incline or decline. Each piece in a package elevates/lowers the track to/from a designated number of inches within a 24 inch stretch, allowing for a smooth transition from one height to another.
To install, pin in place with foam nails and attach with foam tack glue or the low temp foam glue gun and glue sticks. Use alone or with risers.
Athearn Genesis - HO ACF 4600 3-Bay Centerflow Hopper - The Rock #800207
Estimated time of arrival: May 2021
Detailed Information
MODEL FEATURES:
Three body styles:
Early- High side ladder & brake wheel, single side stiffener
Mid- Low brake wheel, short side ladders both ends, single side stiffener
Late- As above but with double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble free operation
Genesis 100-ton trucks with 36Inch machined metal wheels and animated spinning roller bearing caps
ROCK FEATURES:
Era: 1978+
The Rock: As-Delivered. Late style body with stiffener ribs and low brake wheel.
PROTOTYPE AND BACKGROUND INFO:
The 3-bay CenterFlow covered hopper first entered service in the mid-1960s, built by American Car and Foundry. The cars handle loads such as grain, corn and similar bulk commodities. The Centerflow design relies on the cars rounded body to provide structural strength - eliminating the traditional center sill, and making gravity unloading easier. Our 3-bay car represents the common 4600 cu.ft. capacity version. The railroads looking to replace their aging 40Ft box cars in grain service needed a modern hopper design - one that could operate within the tighter Plate B clearances for light branchline and industrial service. ACFs design won them many contracts from a plethora of railroads. One can find these cars still in revenue service today in grain trains and other similar service.
Specifications
PROTOTYPE MANUFACTURER: American Car & Foundry
TRUCK STYLE: Genesis 100-ton
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1970s+
Minimum Age Recommendation: 14 years
Is Assembly Required: No
HO 60Ft Gunderson 7550 Double Door Boxcar - TTX #664434
MASTER MODEL FEATURES:
All New Tooling!
Separate ladders, hand brake and door rods
Door stirrup, unique to the 7538
Single or double plug door as per the prototype
Roof with 3 Stanray X-panels and 3 diagonal center panels
Brake arrangement offset to A end of body
Crisp, accurate lettering and paint details
HO CPR D10 - DCC Ready - Tender w/ Wiring Harness - Black Unlettered
Both tender styles: coal and oil, can be made from this model.
87032 Masking Tape - 18mm
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SECX #2315
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Assorted Personal Doors -
White Styrene
6 doors total
Evergreen Scale Models - Opaque White Polystyrene T Shape .141In x 14In (3 pcs pkg)
The TH&B Ontarian Magazine - Volume 17, Number 4
Official Journal of the Toronto, Hamilton, & Buffalo Railway Historical Society.
This issue includes:
- Part One of the History of the TH&B's Van Fleet by John Spring
- Industry Profile - Columbian Carbon by Paul Hurly
- 75th Anniversary of the H.O. Model Engineers Society by Ron Tuff
- Form 1003, Train Consist Report, FT-1 Kinnear Yard Lift, 10-21-66
- TH&B Historical Society Executive Report
N Scale 40Ft Standard Height Container - Ocean Network Express (TLLU) Set #1 (2pkg)
FEATURES:
Separately applied door rods and handles
Optional separate vents
Prototypically accurate -beveled- all corrugated sides
Each set comes as a 2-pack
1/32 Star Wars A New Hope: Darth Vader Tie Fighter w/Pilot - Kit
CLASSIC STAR WARS MODEL KIT: MPC presents the Darth Vader Tie Fighter from the 1977 sci-fi movie, Star Wars: A New Hope. This classic MPC model kit returns, better than ever, with new detail and figure, it makes a great project for an experienced modeler or Star Wars fan. Add it to your collection today!
NEW DETAIL & FIGURE: This improved edition of the Darth Vader Tie Fighter kit features retooled top & bottom hatches, a detailed cockpit, clear blaster parts, and an ALL-NEW Darth Vader pilot figure. The kit also includes simple instructions and beautifully restored vintage packaging.
FEATURES:
- Skill level 2, paint & glue required
- 54 parts
- Molded-in gray
- Dome display base and metal support rod
- ALL-NEW Darth Vader pilot figure
- Built scale: 7.5 inches wide
HO Lift Rings - 0.012 inch Wire (20pk)
Rapido 044505 HO FM H16.44, With Sound & DCC, Milwaukee Road Orange & Black Scheme No.429
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AABX (6 pkg) #13
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
2305
2308
2312
2315
2320
2330
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Evans X72 Box car: Penn Central w/ Small Logo - Single Car #266879
Detail Variations:
As operated between 1973 to 1976.
6-pack includes the following numbers:
#266500
#266822
#266899
#269175
#269447
#269990
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
HO Greenville 86ft Double Plug Door Box Car - Erie Lackawanna #92003
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: August 2021
Erie Lackawanna (EL) -Original 1965- represents the first of four Erie Lackawanna orders for Greenville 86ft Double-Door box cars. Delivered in 1965, this group of 100 cars featured Center-of-Car Cushioning with truck mounted brakes. This car includes the large spelled out Erie Lackawanna on the left side of the car, and a large gold -Cushioned Car- and large white Erie Lackawanna diamond logo at the right side of the car. We sweat the little details too – our model is equipped with an accurate Ajax hand brake, Apex crossover platforms and 70T trucks with 33inch wheels and rotating Timken roller bearing caps. Remember those truck mounted brakes mentioned earlier? Yes, our trucks have the correct truck mounted brake beam to match that important detail. Finally, this Erie Lackawanna offering was part of the Fords Chicago Stamping Pool, resulting in an accurate Chicago Heights, Illinois return route stencil. Our EL masterpieces are available in six different numbers. EL Fans rejoice!
HO 85Ft General American G85 Flatcar - GTTX (Yellow) #300444
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
Plastic-Cure Brush-On Gap Filling Cyanoacrylate Glue (.5oz)
Features:
-CA glue with a brush on applicator
-Easy to use – Brush on one surface and hold tightly for 10 seconds.
-Fast Drying!
-Bonds most plastics.
Plastic-Cure is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in many cases is an easier way to apply the CA. As long as brush is put back into the bottle after use, the bristles of the brush will not harden. Care must be taken, however, not to introduce foreign material into the bottle. The brush should not be used, for example, to apply CA to wood that has been freshly sanded. Plastic-Cure will also bond wood, but its brush applicator at times will not be the best way to apply it. Plastic-Cure is superior for the application of false nails and wraps on fingernails, where its brush is the preferred method of application.
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- Canadian Pacific
Trailer Train 60ft Pullman-Standard bulkhead flatcar #304660
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Union X-3 Tankcar - UTLX (1930s Paint) #33917
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO EMD GP40 - DCC & Sound - SSW/ Cotton Belt #7602
1966+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO Modern 50Ft Highway Overpass - with Pier
The Rix Modern Highway Overpass for HO scales is modeled after the bridges built today to span over railroad tracks. This style of bridge is typical of most new construction and is used all over the country. The Rix Modern Highway Overpass consist of 50 foot spans which interlock together so that any length bridge can be built. The piers are designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy.
HO NSC Ballast Hopper - Amtrak #11638
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO 1980 Volvo N 10 Dump Truck - Assembled - Mint Green, Gray
This HO Scale 1980 Volvo N 10 Dump Truck by Brekina is based on the workhorse tipper-style dump truck used in North America and worldwide. This detailed model features an injection-molded plastic body with fine decoration, interior seats, window glazing and chrome-plated parts as appropriate.
N Scale ACF Type 27 Riveted 8,000 Gallon Tank Car - Champion Oils / Sterling Fuel #6020
N Scale Scenic Accents Details - Park Benches (6/pkg)
Woodland Scenics N Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and hand painted for extra realism. The People Sitting figure set includes six assorted adult figures in standing and walking poses.
Spray Can - Bright Mica Red (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - MRRX #4814
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO GMD SD40-2W - DC/DCC Ready - CN (Non Dynamic Sergeant Stripes) #5357
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
Glosscote Clear Finish - 3oz Spray Can
Clear lacquer dries to a transparent, high gloss protective finish that does not alter the color.
HO Trinity 3230 Covered Hopper - Cargill Salt (CLSX) #3203
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
The Trinity 3230 Pressure Differential covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
HO EMD SW9 - DCC & Sound - Canadian National (CN Black Scheme) #7009
Photo says: Model will include various detail parts to modernize appearance
Preliminary artwork and drawings. Subject to changes or revisions before production
Canadian National:
Delivered in 1952 / GMDD
CN style spark arrestors (in polybag)
Large barrel style headlight
Frame mounted side handrails
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO SceneMaster City Street Accessory Package
Adds extra realism to streets and structures
Found in cities big and small from the 1960s to the present
Great value with:
- 2 curbside mailboxes
- 2 post-/wall-mounted mailboxes
- 6 trashcans w/dome tops
- 4 fire hydrants (2 each of 2 styles)
- 2 double-sided bike racks (each holds 12 bikes) --
- 2 single-sided bike racks (each holds six bikes) --
- 6 parking meters
- Phone booth w/phone
- Phone enclosure w/phone
-Easy assembly, with appropriate decals for the finishing touch
--Bicycles are available separately
Bikes with Accessories Kit
Mega Graffiti Decals Set #11
9 Design Tags
All of our graffiti decal sets are now laser cut. What this means is you no longer will have to trim the decal close. You only have to cut a couple of small tabs and soak the sheet in water. The trimming has been done for you by our laser cutter. As an added bonus the decals are printed on white decal paper making them more opaque.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #56
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Doors (White Styrene) - Double Personnel Door w/ Windows
7-1/2 x 6-1/2 scale feet / 1 x 7/8 inches
HO GATC 1917-Design 10,000 Gal. Tank Car - IOX Imperial Oil Limited 1918+ #5475
Product: GATC 1917-design 10000 Gallon Tank Car
Scale: HO Scale 1:87.1
Truck: Tangent ASF 50-Ton Cast Steel Spring Plank Truck with separate brake beams
Wheels: CNC-Machined 33inch Flat Back Wheels
IOX -Imperial Oil Limited- 1918+ is the earliest tank car from our 2022 release, and it is a black car with white stenciling. This car is lettered for -Imperial Oil Limited- which was initially part of Standard Oil before the break-up in 1911. At the time of the break-up Imperial Oil was transferred to Jersey Standard Oil, which was later renamed to Exxon. This car has lots of stenciling on it, and includes imperial gallonages on the ends of the car, but also has -United States Safety Appliances Standard- lettering. Our IOX -Imperial Oil Limited- replicas come with era-correct K-brakes
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Brown
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
HO Dash 8-40CM - DCC Ready - BCR: Faded Red/White/Blue #4604 - OVR Exclusive
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
HO UAC TurboTrain Completion Pack: VIA Set #2
#263-257-254 + IC-34 #264
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model.
HO ALCo RS-3 - DCC & Sound - Norfolk & Western #300
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
Analog (DC) version has 21 pin socket for DCC module.
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629
or
TCS #EU-821 8 function decoder
FEATURES:
Blue with Yellow lettering,
7 foot cab,
Cab mount horn,
Body side number boards,
Under deck storage box,
Dynamic brakes
HO Assorted Dock Cranes (5, 7, 9 ft)
A unique Streaking Grime effect specifically designed for vehicles painted in a tri-color camouflage scheme like those used by NATO but can be used in any vehicle. Create realistic streaks and rainmarks with this light colored enamel effect. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from lower parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.
HO AutoFlood III RD Coal Hopper - PGNX #1214
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
GLa 2-Bay Hopper: New York, Ontario & Western - 6(pkg)
Features:
All-new tooling
Scaled from original blueprints
Die cast frame and floor for optimum weight
Full interior rivet and bracing details
Factory installed wire grab irons
K- or AB-brake gear installed as appropriate
Factory installed Kadee #158 couplers in narrow draft gear box
Turned metal wheels in correct PRR 12D-F8 trucks
Accurate paint and lettering
Multiple road numbers available for each paint scheme and railroad
Detail Variations:
As operated from 1933 to the 1953
6-pack includes the following numbers, all individually packaged:
#1205
#1237
#1263
#1312
#1618
#2315
HO GP40-2 - DCC Ready - CSXT #6441
Detailed Information
CSX FEATURES:
Newly tooled rear slug connection boxes
Large front anticlimber
Mid production with corrugated grilles
Body-mounted side bell
Chessie/CSX style front rock plow
K5 horn
Lit class lights and number boards (effect in DCC)
During the late 1980s, CSX Transportation modified many of their GP40-2s into -slug mothers- that powered RDMT (CSX term, short for Road-Mate) road slugs. The -slug- is a term used for (in most cases) a secondary locomotive that has a removed/deactivated engine but kept its traction motors. The -mother- unit at slow speeds can produce enough power to provide electric current to other traction motors using the same amount of fuel consumption. The -mother- and -slug- combination can provide the power of two locomotives using a single diesel powered unit. CSX liked the results, and modified many older GP30 and GP35s into road slugs, retaining their cab controls so that they could still be operated in lead position, but without the noise from the prime mover.
ROAD NUMBER SPECIFIC FEATURES:
#6427
-Stripe- repaint
regular radiator fans
-mail slot- battery box doors
#6429
-Stealth- repaint
regular radiator fans
regular battery box doors
#6441
-Stealth- repaint
Q radiator fans
-mail slot- battery box doors
large exhaust silencer
nose toilet hatch
GP40-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Tru Color Paint - Acrylic - CSX (Y2K) Blue - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 53ft Singamas Corrugated-Side Container - Canadian National
(gray, red; CN Intermodal Logo)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes
HO Chemical Tankcar - Hooker Chemicals #1350
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Wireform safety handrails
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 15inch
Talus - Extra Coarse Buff (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings, and/or road cuts. Intermix grades and blend shades for the most realism. Color natural talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle talus and secure with scenic cement (#191).
Particle size - Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
RTR 60Ft Gundreson Box Car - CPR #218363
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO F89-F89ft 8in TOFC Flatcar - XTTX #153209
MODEL FEATURES:
- Die-cast underframe
- Weighted for trouble free operation
- Raised and lowered hitches included
- Use for dedicated intermodal trains or mixed freight
- Detailed deck
- Wire formed brake plumbing
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Separately applied wire grab irons on and ladders
- Separately applied brake ratchet
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Machined metal wheels
- Wheels with RP25 contours operate on Code 55, 70, 75, 80, 83, and 100 rail
- Body mounted McHenry operating scale knuckle couplers
- Minimum radius: 22 inches
- Recommended radius: 24 inches +
- XTTX version: cars have 4 hitches to handle different trailer lengths. Extra raised and collapsed hitches included to model any configuration.
Spray Can - Navy Blue (US NAVY) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AWWX 6 Pack
4602, 4608, 4609, 4618, 4621, 4631
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Tangent Scale Models HO Greenville 86ft Boxcar CSX
CSX -Repaint 1991+ leads off this release, offering examples of repaints from B&Os first order of cars in 1969. Applying CSX paint to a Tangent replica is not a walk in the park ? It is all about the big AND little details. This car features the large CSX logo on the center of the sides and accurate Ease up! stickers on the corners. Apparently, the more the better, since CSX also applied tiny Ease up! stickers on each door. Yes, we have faithfully reproduced this extraordinarily small detail. Get out your magnifying glass if you want to read the CSX Quality Check oval sticker applied above the COTS by Grand Rapids employees. This Greenville car features Morton style crossover platforms, an Ajax hand brake housing, accurate End-of-Car Cushioning details with truck mounted brake hardware, and 70-Ton Barber S-2 Trucks with 33in wheels and accurate Timken roller bearing caps. Check out the CSX-specific modern features in this release, including the large tack board mounting location on the door and the single and double third arms on the top door tracks. We are now offering CSX in six different numbers!
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
HO/HOn3 Code 70 Narrow Gauge Flex-track - Non-weathered 3ft Section (6pcs)
Flex-Trak features scale size ties, tie plates and spikes, irregular tie spacing, natural brown tie color and nickel-silver rail. 3ft lengths.
HO EMD SW9 - DC/ Silent - Canadian National (CN Black Scheme) #7000
Photo says: Model will include various detail parts to modernize appearance
Preliminary artwork and drawings. Subject to changes or revisions before production
Canadian National:
Delivered in 1952 / GMDD
CN style spark arrestors (in polybag)
Large barrel style headlight
Frame mounted side handrails
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
Tangent Scale Models HO PS4750 Covered Hopper ROCK -Delivery Blue 6-1978
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ROCK -Delivery Blue 6-1978- is available in the Blue Original 1978 scheme. Our -R- black and white logo and blue color is stunningly executed, check it out for yourself. ROCK lettering done right is something to behold, with accurate data stencil breaks and careful duplication of ROCKs data style. This is Tangent-accurate hand-drawn artwork. We have also matched the 1978 ROCK details including body-mounted brake center sill linkage, Miner outlet gates, a Universal hand brake and matching Universal brake wheel.
HO NSC 64 Ft 6000 Cubic Gondola HS - TLPX/ Triple M Metals #2241
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
N Scale 50Ft NACC Box - Dresser Magcobar #42984
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
N Scale Laser-Cut 2-Lane Curved Wood Grade Crossing - 18-20in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights.
HO Kartrak ACI Labels - Decals
Decal set with 96 different ACI labels useful from late 1960s to present on cars and locomotives. Unlike other ACI labels on the market, these use gray (not pure white) for the lightest colored bars to more closely match the prototype. Note that these have been printed using a screen + offset technique to provide a higher quality decal.
HO Railroad Bridge Stone Wing Walls - Resin Casting - One Each Left & Right
DIMENSIONS:
Approximately: 3-3/4 x 7/16 x 4 inches
FEATURES:
- Common prototype design used with various types of bridges
- Fits steam, diesel and modern-eras
- Highly detailed parts
- Use with Cornerstone single-track bridges
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Duluth, Winnipeg & Pacific - Delivery #3607
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO 19,600 Gallon Tank Car - Cerestar (NATX) #190145
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Built: BLT 11-99
Spray Can - Dark Mica Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Tidy Track - Dust Monkeys (4pk)
Dust Monkeys are an easy, convenient way to remove dust from track and stop further accumulation during regular train operation. They hang from rolling stock axles out of sight!
HO 40ft 16K Gallon Tank Car - Archer-Daniels-Midland/ADMX #15810
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO RTR 53Ft Jindo Container - Crowley (3pkg) #2
MODEL FEATURES:
Newest vertical rib front
Easily stackable
Separately applied door closure rods
Fully assembled
Each container individually numbered
Razor sharp printing and painting
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Yellow) #505373
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
RTR 60Ft Gunderson DD HC Box, BNSF/Wedge #761217
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO Scale 70-ton Freight Trucks w/Journal Boxes (1 pair)
WHEELSET FEATURES:
- Accurate turned metal construction
- Insulated on one side
- Blackened
- Non-magnetic
- RP-25 flanges
Our semi-scale wheels feature a narrower tread but with an RP-25 flange for maximum compatibility with commercial track products. These will drop right into most HO scale trucks for a visual and operational improvement!
HO 1967 Ford Galaxie - Clearwater Aqua, White
Mini Metals - Assembled
HO Marine Industries Piggyback Flatcar - Single Undecorated-Assembled - CP Version
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
N Scale 36ft Old Time Stock Car - CCCC #2444
MODEL FEATURES:
- Era: 1890s-1910s+
- Separately applied roof walk
- Molded truss rods with turnbuckles
- Highly-detailed, injection molded body
- Screw mounted trucks for accurate tracking
- Truck mounted magnetically operated knuckle couplers
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Fully assembled and ready-to-run
HO EMD F7A/F7A Set - DCC Ready - Wabash #1169-A/#1189
Detailed Information
WAB FEATURES:
F7 Phase I
No dynamic brakes
Dual single-note air horns (A-units)
Passenger pilot
Cooling coils on roof
Wabash units 1158-1189 were delivered in 1951-52. In the 1960s, they were renumbered into the 600-726 series. Wabash 1189 has been preserved and is currently operational at a railroad museum in Illinois.
ROAD NUMBER SPECIFIC FEATURES:
#625
Nose MU connection
cut skirts
#631
Nose MU connection
cut skirts
#1169-A
Full Skirt
#1189
Full Skirt
F-UNIT SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Windshield wipers
Lift rings
Wire grab irons
Sanding lines
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Directional constant lighting
Headlight brightness remains constant
Separately-applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes & retention tanks
Speed recorder unless noted
See-through cab windows and full cab interior
Etched metal fan grilles
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO GMD SD40-2 - DCC Ready - St. Lawrence & Hudson #5636
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO Scale SD30C-ECO - DCC & Sound - Canadian Pacific #5041
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Milwaukee Road Rack / Trailer-Train Flatcar TTBX #941676
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
International(R) 4300 2-Axle Truck with Tree Trimmer Body - Assembled -- White cab, body and boom
60ft Pullman-Standard Flatcar - Ready to Run -- Alaska Railroad
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
SubTerrain-System-Foam-Accessories-Road-System-Smooth-It 1 qt size
Smooth-It is a plaster material that is used to smooth rough spots, create streets, roads and parking lots. Mix with water and apply directly to any clean hard surface. Covers 26Ft by 3inch by 1/4inch (HO Scale - two-lane highway).
HO EMD SW9 - LokSound 5 Sound & DCC - Toronto, Hamilton, & Buffalo #55
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- ESU LokSound 5 sound for DCC and DC layouts
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
HO, N, TT - LED Lighting Strip w/DCC Decoder and Red Marker Lights - Warm White
The LokSound by ESU LED Interior Lighting Strips are perfect for lighting HO and N Scale passenger car interiors operating on DCC layouts. Theyre designed for use only on track power (electrical wipers and accessories available separately). Offered with warm white (397-50708) or yellow (397-50709) LEDs they allow you to match your lighting color to your modeling era. The strips include a small potentiometer so you can adjust the brightness. For shorter cars or cabooses the strips can be cut. The red marker LEDs are on wire leads for easy placement where needed.
The integral ESU decoder supports both Motorola(R) and DCC, and also works on DC analogue layouts. The operating mode is detected automatically. In addition to the basic maximum brightness adjusted with the control knob on the lighting strip, brightness may be further adjusted by means of the software. Various prototypical lighting effects such as soft dimming, fluorescent lamp effect, faulty fluorescent lamp, battery powered lighting and many others provide realistic results. The 11 LEDs are wired in several groups, which can be switched separately. Function mapping allows you to assign the LEDs to the function button of your choice. Two additional outputs may be used for the red end-of-train lights or for directional lighting in a cab control car. All effects can also be programmed once the lighting strip has been installed and the values of your DCC LED Interior Lighting Strips can be read on a programming track.
Spray Can - Matte White (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
0.012 inch Thick Stainless Steel Flat Strip - 1/2inch x 12inch
Stainless Steel Flat Strip 12inch Long (1 pc)
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - MRRX #4819
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO International 4300 Utility Truck w/Drill - Assembled - White
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Position-able Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
Introduced in 2002 to replace the 4000-series trucks of the 1990s, the medium-duty 4300 was built in three variations and became a very popular chassis for a variety of commercial applications. Today, they are still in production as the International Durastar.
All Scale Classic Trees - Ready Made - Flowering Tree 2-3 inch (4pk)
Fruit and foliage are applied by hand, lending a unique and realistic quality to every tree. Trees have planting pin and optional detachable base for temporary placement.
HO Delivery Target Red 1953+ Steel Bay Window Caboose - Illinois Terminal #982
Product: St. Louis Car Co. Illinois Terminal Steel Bay Window Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Gould plain-bearing trucks with separate brake beam part
Wheels: CNC-machined standard RP25 .110inch tread 33inch wheels
DC/DCC Lighting Features: Interior Lights
Illinois Terminal (ITC) -Delivery Target Red 1953+- is the first of three different Illinois Terminal schemes we are offering in our first production run of St. Louis Car Company cabooses. These cars feature a safety-inspired bright -target- red paint. The caboose also has other colors present on the exterior, including -canary yellow- handrails and steps. Additionally, the Standard Railway Equipment roof received a coat of light gray paint. The prototype Illinois Terminal lettering above the cupola and the ITC with road number was applied onto thin metal placards which were bolted onto the car side and had an off-white appearance, which we have replicated this -off-white- reflective color with our graphics. Similar to our NYC offerings, our models include large (unlit) oil lanterns on one end of the caboose. The fully-painted and apportioned interior for these models includes the two tone green scheme as found in the original cabooses. Check out those double bunks as you peek through the large windows. Our Illinois Terminal delivery scheme cabooses are available in two road numbers.
G2 Dash 9-44CW - DCC Ready - Southern Pacific #8107
ETA: Late October 2022
Detailed Information
SP FEATURES:
1994 as-built appearance
Early (-dog leg-) stepwell gussets
Sinclair antennas
Nathan P3 horn
Large SP plow
SP NOTES:
The SP 8100s were some of the last mainline power delivered to the SP proper. The engines were used on all types of trains, in multiple with other class members of other SP 6-axle power. Many of them survive to this day, albeit repainted into Union Pacific colors.
DASH 9 SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
HO NSC 64 Ft 6000 Cubic Gondola HS - NMPX/ Niagara Metals #2352
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO Steam Turrett - Brass Casting
HO 40Ft Hi-Cube Dry Containers - Maersk Sealand (3pk) Set #1
3 pack road numbers include : MSKU 836088/836426/836519
Body: Type A
Door: Type C
Latch: Type C
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
HO Hal's Hobbies
Dimensions: 20 X 36 Kit designed for right hand street corner.
Recessed front entry door.
Balcony and railing included.
HO 1958 Cu Ft 2 Bay Covered Hopper - Closed sides
ATSF #181840
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
SD-1 Signal Driver
Logic and output drivers to control any 3-lamp, 3-color block signal. Will power LED or lamp-type signals. LED-type requires common positive (anode) connection of all LEDs. Detection circuits (such as BD-1) are needed for a minimum of three blocks to display all three aspects.
Features
All scales
Drives LEDs or Incandescent Lamps
10-18 volt DC input
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Nickel Plate Road #558
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15452
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO FM H16-44, Standard DC, New Haven: Alpert Scheme No.1609
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO NSC Ballast Hopper - Amtrak #11659
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
N Scale Long Barrel Ore Hopper - CN Mineral Brown #346623
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO Scale NSC 73Ft Centerbeam Flatcar - Trailer Train (TTZX) #861205
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
HO PS-2-4427 High Side Covered Hopper - CPAA Delivery 1-1970 #388323
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36in 8243; Wheels
Canadian Pacific CPAA NA Delivery 1-1970 shows as-delivered gray cars leased from North American Car Corporation to Canadian Pacific. These cars feature the distinctive NAHX Roman-style data lettering that also carries over to the CPAA reporting marks and numbers. The North American Car black/white/red badge down along the sill provides a tiny bit of color to this gray lease scheme. The models come equipped with Youngstown EZ-Roll gravity gates and Apex-style end crossover platforms. With a 1970 build date, these Pullman-Standard lot cars leased to NAHX include center sill supports between the bays and open-style end running board supports. The finely printed capacity data and internal liner data varies between each car number. And yes, dont worry, these NAHX cars have their accurate serial number stencils along the centersill of the car on each side. Black 100-ton Barber S-2 trucks with accurate (and rotating!) Timken caps finish the model.
HO FGE 57Ft Mechanical Reefer - DCC Ready - SFLC #1834
Detailed Information
57Ft MECHANICAL REEFER FEATURES:
Available with onboard SoundTraxx sound
Scaled from prototype manufacturers drawings and field measurements
Repaints often vary by road number in the size and style of the reporting marks, car numbers and patch shapes
See-through protective screens on the genset end
Detroit Diesel 2-71 Genset visible inside
End wall corrugation visible inside
Inner refrigerator bulkhead
See through end platforms
Two different exhaust stack types: straight pipe with -flapper- or T-shaped -smokejack- per prototype and era
Full underframe detail including Keystone cushioning, air brake reservoir, control valve, brake cylinder, brake plumbing, and fuel tank
Factory applied end ladders and door closure rods
Trainline hoses with silver ends
Three different coupler cut lever styles per prototype
Body-mounted or truck-mounted brakes per prototype
McHenry operating scale knuckle couplers
100-ton roller bearing trucks with rotating bearing caps
Fully-assembled and ready-to-run
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Machined metal wheels with RP25 contours
Weighted for trouble-free operation
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO Storefront Signs - Main St. (Set #3)
Blair Line HO Scale Business and Storefront signs are printed in appropriate colors on thin plastic for easy assembly or placement with plastic cement or CA glue. Colorful signs are based on real signs and many include two identical signs for back-to-back, two-sided mounting. Steam and diesel-era signs make great roadside, street-side, trackside and structure details.
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
Models depict in-service locomotives from the mid-1990s and beyond.
Road name and road number-specific painting and lettering.
Multiple road numbers offered.
New and improved high-torque motor and drive mechanism guarantees smooth operation.**
Operating radiator fans. Improved radiator fan drive unit with quieter operation and selective fan control.**
All-wheel power pickup and all-axle drive.
Heavy die-cast, zinc alloy chassis.
AuroraJanney scale head replica couplers installed.
NMRA RP-25 wheel contour with Code 110 tread width.
Minimum radius: 18? (recommended 22?)
* Lighting functionality is limited on DC models operating on DC track power.
** Improvement over our previously-released HO scale SD60F.
DC Version Features:
DCC ready with 21MTC connector.
Dual sugar-cube speakers (functional after installation of a DCC sound decoder).
Operates on DC track.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14093
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Evergreen Scale Models - Opaque White Polystyrene Z Channel .250In x 14In (2 pcs pkg)
HO 60ft PS Flatcar - Trailer Train/VTTX #97697
(yellow, black TT logo)
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
9-pin to DCC Medium Plug - Long Harness (3 inches)
HO Duplex Sleeper - VIA Rail Canada #1118 / Egerton
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO Code 100 Nickel Silver DCC-Friendly #5 Turnout - Right Hand
Track is the most important model on your HO layout, and Walthers Track makes it easy to create realistic mainlines, sidings, and more! Combining great looks and great performance, each Code 100 item comes fully assembled and features:
- Thin profile ties in realistic dark brown with enhanced wood grain detail
- Fine profile molded spike and tie plate details on each tie
- Spike-mounting holes positioned next to the rail
- Molded starter points on underside of ties for center spikes
- Custom formulated nickel silver rail for improved electrical conductivity
Intermountain HO Scale ACF Center Flow Hopper Western Maryland #604951
HO Bathtub Coal Gondola - MLMX/ Sims Metal #351
Built: 10-08
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
Alco RS-11 Conrail 7651 DCC & Sound
ESU LokSound Installed
The Rapido HO Scale RS-11 model features:
•Correct hood and roof profiles 3D scanned from the prototype
•Operating number boards, headlights and green and white class lights and cab control stand lighting
•Rapido innovative dead straight metal side handrails with plastic stanchions
•Roadname-specific details including steps, lights, equipment boxes, handrails, fuel tanks, air intake louvers and more!
•Full underbody piping, conduits and steam lines, where appropriate
•Correct roadname-specific corner steps
•Separate grab irons and wire handrails installed at the factory
•Heavy, die-cast chassis and full, multi-colour/color interior
•Rapido proven 5-pole skew-wound motor with dual flywheels and silky-smooth drive
•DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound)
•Accurate sounds recorded from a real Alco 251B prime mover
•Factory-installed Macdonald-Cartier couplers mounted at the correct height
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x10) .011In x .112In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 1 X 10 LUMBER SIZE IN HO SCALE
HO NSC 3650 cf 66Ft Railgon - GNTX #295566
Aurora Miniatures North America Inc. is proud to offer the National Steel Car 3650 cf 66ft Railgon Gondola in HO scale. These Canadian-built modern 66? gondolas were introduced in 2012, they were assigned the GNTX reporting mark and painted in the prominent Railgon scheme with a large Tuscan red TTX logo on a yellow background. They can be found across North America in steel mill service. Similar-looking gondolas were also built for BNSF, Canadian Pacific and other owners. We are offering 20 unique GNTX numbers along with a ?Data Only? version for the first production run.
VIA Rail HEP 1 (2020 to Present)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
N Scale ACF 3560 Center-Flow Covered Hopper - Cancarb ACFX #74072
Features:
Prototypical painting and lettering
Plastic body with die cast chasis
Removable coal load
Product Information
The Atlas Trainman ACF 3560 Center-Flow Covered Hopper is based on common steel cars used by many railroads for handling potash, fertilizers, chemicals and more. It features an injection-molded body with applied plastic details where appropriate, smooth paint, crisp lettering and AccuMate(R) knuckle couplers.
HO 89ft Thrall Bi-Level Auto Carrier - CN/GTW #504128
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
N Scale Dash 8-40CM - DCC Ready - Canadian National: Stripes #2405
Our N Scale Dash 8-40CM model features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
Heavy, die-cast chassis with a powerful motor and dual flywheels
Operational headlights and rear lights with operational factory-installed ditch lights (plus rock lights on BCOL locomotives)
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
Factory-installed couplers mounted at the correct height
HO Glacier Gravel Company - Kit
Product Information
Add aggregate traffic to your layout with this rugged trackside structure. The HO Scale Walthers Cornerstone Glacier Gravel Co. is a model of a stone crusher-washer with equipment for loading rail cars or trucks. Railroads have an enormous appetite for crushed rock. A mile of mainline can gobble up thousands of tons. Glacier Gravel Co. will help satisfy your railroads appetite for rock.
This easy-to-build kit looks great as part of a stone quarry operation, alongside mines like the New River Mining Co. 933-3017 and Coal Flood Loader 933-3051, in a mine, or as part of a slag recovery operation down the track from the steel mill buildings. Matching conveyor sections 933-3149 are available separately for customizing your Glacier Gravel operation as needed. Detailed parts capture the look of concrete and steel construction. The kit features corrugated construction on a heavy poured concrete foundation/loading tunnel. Conveyors to a truck dump and feeder from the quarry complete the facility. Rock crushers similar to this have been in use since the 1940s, so Glacier Gravel Co. will fit perfectly into transition and modern era layouts. The main building can accommodate two tracks inside and includes a detailed loading bin. Glacier Gravel Co. also includes decal signs and complete instructions. Glacier Gravel Co. is just one of a wide variety of Cornerstone industrial buildings.
Easy-to-build plastic kit
Use as a stand-alone rock crusher and loader or as part of a larger quarry or mine
Fits 1940s and later modeling eras
Handle hoppers, gondolas or trucks on up to three loading pockets
Molded in appropriate colors
Decal signs for several businesses
As shown Glacier Gravel Co. measures: 9-3/8 x 11 x 10-1/4inch (23.8 x 27.9 x 26cm)
N Scale Scenic Accent Figures - Farm Horses (6/pkg)
HO G2 SD80MAC - DCC & Sound - CSX/YN2 #801
CSX FEATURES:
Former CR units
Operating forward and reverse red marker lights
Correct horn and antennas per road number
Approved by CSX experts
Just as a batch of SD80MACs were sent to NS after the CR split, CSX acquired a batch as well. After a short period of running around patched, they were all repainted into CSXs -YN3- scheme. Only one, CSX 801 (which was renumbered to 4591), received the -YN2- scheme. It eventually got the YN3 treatment.
ROAD NUMBER SPECIFIC FEATURES:
#801
Fresh YN2 repaint with CR details.
#4591
YN2 paint with patched numbers
K5 horn
white painted roof with GPS dome.
#4590
YN3 repaint
-Spirit of Benning-
Leslie 3-chime horn
white painted roof with GPS dome.
#4600
YN3 repaint
K-5 horn
white painted roof with GPS dome.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
CV chart included in the box
HO NSC Ballast Hopper - CP Rail (Branchline) #456191
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO Hawker-Siddeley Van - Caboose - Canadian National - As-Delivered (Red/Orange Steps) - #79323
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
HO 89ft Thrall Bi-Level Auto Carrier - CN/GTW #504100
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
HO - Nathan K2 K12 2-Chime Air Horn - Lost Wax Brass Casting
HO NSC Ballast Hopper - CSX #965685
1980s+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16153
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
AK Interactive Dark Mud -matt dark mud wash
HO Code 83 Nickel Silver Rail 36in (0.9m) (17/pkg)
Each piece is 36 inches (0.9m) long; 51 feet (15.5m) total length.
Perfect for do-it-yourself and custom track projects, WalthersTrack Bulk Rail can also be used with various Cornerstone Bridge kits, available separately.
Other features include:
-Matches rails used on WalthersTrack Code 83 products
-Fits mounting points on Cornerstone HO open deck bridges (sold separately)
-Great for do-it-yourself and custom track work
-Custom-formulated nickel silver rail for outstanding electrical conductivity
HO Scale 1980-1985 Chevrolet Caprice Sedan - Assembled - Green
The Rapido Chevrolet Caprice and Impala cars feature:
Both Wagon or Sedan carbodies
1980s body style designed from photos and drawings
Multiple front grille designs covering the entire 1980s
Real rubber tires (and white walls too, where appropriate)
Multiple rim designs (wire spoke, dog dish and more)
Realistic chrome finish on bumpers, rims and more!
HO - Nathan K5 Air Horn K5LR2
12 fl-oz- 354 mL Adhesive Glue
Woodland Scenics Field System Static-Tac is specially formulated and has the right viscosity for adhering Static Grass and Briar Patch. It comes in a bottle with a graduated tip that works for large or small areas. Static-Tac is an easy-to-spread adhesive that dries to a clear matte finish for realistic results.
48Ft All Purpose Well Car - TTX (Next Load Any Road) #456301
Features:
Floor with correct ovals and cut-outs.
Two hitches
Etched walkways
Four IBC bins.
Detailed brake components
Prototypically accurate paint schemes
Recommended 24inch radius
Railroading and the Automobile Industry
Softcover, 96 Pages
Product Information
Railroading and the Automobile Industry from Kalmbach is a great informational guide for adding automotive industry models and operations to your layout. Authored by noted modeler and former Model Railroader Magazine associate editor Jeff Wilson you will find plenty of information about open and enclosed auto racks, auto parts boxcars, assembly plants, and automobile train switching and other operations.
RTR 53Ft Jindo Container, PACU (3pkg)
Era: 2007+
Primed For Grime
MODEL FEATURES:
Fully assembled
Newest vertical rib front
Easily stackable
Separately applied door closure rods
Each container individually numbered
Razor sharp printing and painting
SmokeBox Graphics Compressed Lettering Boxcars
Decal set covers leased boxcars including BKTY, EEC, LRS, WRWK, and others using distinctive compressed lettering. Full data and stencils for up to four cars, billboard lettering for two. Includes truck side frame reporting marks, red brake shoe labels, and green cleaning stickers. View. Pairs well with our dark yellow reflective strips
Athearn - HO RTR PS-2 2600 Covered Hopper - Baltimore & Ohio - #600401
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
HO 52Ft Mill Gondola - GONX Railgon #310222
NEW FEATURES:
Refined end-sheet molded-on details
Improved rivet and bolt details
Corrected wire grab-iron placements
New top-chord details
New jack reinforcement pad details
New coupler cut lever mounting details
MODEL FEATURES:
Separately applied wire grab irons
Body-mounted McHenry operating scale knuckle couplers
33inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO Vancouver Iron Works Piggyback Flatcar - Canadian National #688105
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
Mini-Panel - Automation Controller for NCE DCC Systems
Use one button to control multiple switches or macros on your NCE DCC system. You can have up to 30 pushbuttons, toggle switches, block detectors,etc. Can be connected for control of turnouts, signals and other devices. Easy programming, just plug in a Pro Cab or a Powercab. Simple hook up, one Cab Bus connection and 2 wires for each pushbutton or other input device. Can be used to perform simple automatic train control and other layout automation tasks.
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Norfolk & Western
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
SD45-2 - DCC/Sound - HATX #909 (#2)
Detailed Information
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
Models equipped with DCC+Sound will have the new 645E3 20-cylinder prime mover recording by SoundTraxx
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; we are excited to include new features often requested, to the SD45-2 and upcoming Genesis models.
HATX FEATURES:
Windwings per prototype
Nose mounted headlight
Small anticlimber
Standard height Intertial hatch, exhaust stack, fan housings
Black or white numberboards per prototype
Firecracker or Sinclair antenna per prototype
3-or-5 chime horn per prototype
Frame mounted bell
Commonly used in lease service starting in the late 1980s. Prototype railroads would lease locomotives during power shortages and traffic upturns. These particular units were leased to several eastern roads including Grand Trunk Western and CSX.
LOCOMOTIVE FEATURES:
Safety tread on walkways
Fine-scale handrails for scale appearance
Factory applied wire grab irons
Windshield wipers
See through cab windows
Detailed and painted cab interior
Sliding side cab windows
Metal lift rings
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with a 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately painted and printed paint schemes
Body mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
New LEDs for trouble free operation
Bi-directional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18in
Recommended radius: 22in
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2
Sound units operate in both DC and DCC
Some functions are limited in DC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes CV chart included in operators manual
PROTOTYPE INFO:
The SD45-2 was an initial success; it was a complete improvement or upgrade as part of EMDs Dash 2 line; it had little to almost absolutely no flaws during the early stages of production and during the models official introduction. It was both popular and compatible with the original SD45 as well, with its large 20-cylinder engine. The SD45-2 lasted somewhat longer than most SD45 units on various owners rosters.
HO Doors (White Styrene) - Entryway Type w/Single Large Window - pkg(3)
N Scale 40Ft Standard Height Container - United Arab Shipping Co (UACU) Set #1 (2pkg)
FEATURES:
Separately applied door rods and handles
Optional separate vents
Prototypically accurate -beveled- all corrugated sides
Each set comes as a 2-pack
Pink Engineer Strap Hat - Toddler
This is the real McCoy, the most authentic engineer hat ? heavy, hickory striped denim in both blue and pink. Both hats are available in four size ranges: infant, toddler, child, and adult. Each can be either elastic back or snap back. These are the finest engineer hats on the market!
N Scale 1970 Bedford RLHZ Green Goddess Self-Propelled Pump - Glamorgan Fire Service
HO Scale - 1966-77 Chevys 9500 High Mount Cab Tandem Axle Short Hood Tractor - Unpainted and Resin Cast Kit
HO Trailer Train (TTX) - 50Ft, 60Ft, 68Ft, 85Ft, & 89Ft Flat Car, Boxcar Red Scheme - Decals
Circa: 1960s
Scale: HO Scale
Description: Trailer Train (TTX) - 50Ft, 60Ft, 68Ft, 85Ft, & 89Ft Flat Car, Boxcar Red Scheme. - Waterslide Decal - HO Scale
N Scale Model 3 Magnetic Flagman Wigwag Signal
Magnetic in the description means that the prototype was made by the Magnetic Signal Company (the name of the company) The Magnetic Signal Company of Los Angeles, California, was the manufacturer of the ubiquitous -Magnetic Flagman- wigwag railroad crossing (or level crossing) signal seen all over California and the western states.
3-Cluster MU Hoses 36in - Pre-1980 Locos
HO Concrete Stepped Tunnel Abutment (2pk)
DIMENSIONS:
4-1/2 x 3-1/2 inches
HO PS-2-4427 High Side Covered Hopper - CPAA Delivery 1-1970 #388219
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36in 8243; Wheels
Canadian Pacific CPAA NA Delivery 1-1970 shows as-delivered gray cars leased from North American Car Corporation to Canadian Pacific. These cars feature the distinctive NAHX Roman-style data lettering that also carries over to the CPAA reporting marks and numbers. The North American Car black/white/red badge down along the sill provides a tiny bit of color to this gray lease scheme. The models come equipped with Youngstown EZ-Roll gravity gates and Apex-style end crossover platforms. With a 1970 build date, these Pullman-Standard lot cars leased to NAHX include center sill supports between the bays and open-style end running board supports. The finely printed capacity data and internal liner data varies between each car number. And yes, dont worry, these NAHX cars have their accurate serial number stencils along the centersill of the car on each side. Black 100-ton Barber S-2 trucks with accurate (and rotating!) Timken caps finish the model.
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- Canadian National #621306
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO EMD SW1200 -DC/Silent - Conrail (ex PRR) #9353
(Type A Trucks)
The HO Scale Rapido SW1200 features:
- Designed from original blueprints and field measurements
- Heavy diecast frame, chassis and gearboxes for superior pulling power
- Rapidos renowned silky smooth-running drive system
- Working cab interior light and inspection lights
- Fully detailed Type A or Flexicoil trucks, as appropriate
- Full cab interior with working cab interior light and non-working fire extinguisher and fridge (where appropriate)
- Working headlights and illuminated number boards at both ends
- Some models have a rotary beacon or flasher/strobe as appropriate
- Separate handrails, including crash bars inside the cab
- Multiple exhaust stack and battery box door styles
- With or without working drop steps, as appropriate
- Incredible underbody piping and conduit detail - a Rapido hallmark!
- DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings from a 567 prime mover
Perfect for moving bulk loads of all kinds that dont require protection from the weather, the WalthersMainline 34ft 100-Ton Two-Bay Hopper is a versatile addition to HO operations!
One time run of these road numbers, order now - limited quantity available!
In service from the 1970s to the present
Used to haul ballast, sand, gravel, ore and other bulk loads
Factory-applied door and brake details
Heavy die-cast metal underframe
Add a realistic load in minutes with the cast resin Chooch Gravel Load (214-7292) sold separately
Correct 36in RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 50ft FMC Combo Door Boxcar - Railbox/ABOX (Late) #50078
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Weighted for optimum performance
- Minimum radius: 18 inches
- Body-mounted, McHenry operating scale knuckle couplers
- Fully assembled and ready for your layout
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
N Scale 10x12 Freight Doors - pkg(2)
HO G2.0 SD60M Tri-Clops - DCC & Sound - SOO #6060
Expected ETA: December 2022
Detailed Information
SOO FEATURES:
Large EMD plow w/red edges
Cab door without window
Winterization hatch
Leslie 3-chime horn
Roof mounted strobe (operates in DCC)
In 1989, Soo Line purchased 5 SD60Ms from EMD, numbered 6058-6062. They were all painted in this attractive and bright -Candy Apple- red scheme, and could be seen all over the system. Soo was known to run these as a single unit in hot-shot TOFC trains as in the image below. After Soo Line was folded into the CP Rail System, these units remained in Soo colors for a long while before finally being repainted in CP Rail colors.
ROAD NUMBER SPECIFIC FEATURES:
#6058
As delivered -Candy Apple- scheme
#6060
As delivered -Candy Apple- scheme
#6062
Early patch
Soo features
added front ditch lights
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Warranty service available
Minimum radius: 18inch Recommended radius 22inch
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
Animated roller bearing caps
SOUND-EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO 60ft Hi-Cube Plate F Boxcar - Trailer Train TTX #663173
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO GP40-2 Diesel - DCC & Sound - Chessie/CSX #6121
CSX - PATCHED FEATURES:
- Offered by popular demand
- Correct horn per prototype
- Side hood mounted bell
- Chessie -mail slot- battery box doors
- Front and rear Chessie style rock plows
- All-new artwork provided by noted CSX railroad expertsy
GP40-2 LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18 inches
SOUND-EQUPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of -In Service- equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Lackawanna (DL&W Phoebe Show) #51383
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Erie #79192
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Plastruct 90366 ABS 1-1.25inch Strip Stock Dark Grey (4pcs pkg)
60ft Pullman-Standard Flatcar - Ready to Run -- TTX OTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 85Ft Budd Dome Coach - Ready to Run - Amtrak Phase I
Product Information
Provide passengers spectacular views of the scenery on your classic streamliner quickly and easily with this WalthersMainline HO Scale 85Ft Budd Dome-Coach! Nicely detailed, affordably priced and built tough for years of dependable service, this car is based on fluted-side cars used my many North American railroads. 85Ft Budd Dome-Coach are perfect for use with other WalthersMainline HO Scale streamlined passenger cars.
Model passenger service in minutes at WalthersMainline prices!
Based on streamlined cars used by many roads
Eight authentic car types
Operates on 18inch or larger radius curves
Correct prototype 85Ft length
Tinted window glazing
Fully assembled, ready for fun on your railroad
Rugged construction for years of service
Detailed body
Full interior
Correct 36inch turned metal RP-25 wheelsets
Proto MAX(TM) metal knuckle couplers
LED interior lights available separately
Molded drill starter points for add-on wire grab irons (sold separately)
Officially licensed by Amtrak Amtrak is a registered service mark of the National Railroad Passenger Corporation
HO Value Line RTR - 13 Panel Coalporter - CSXT (Gray) #390938
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Genesis Motor Retrofit Kit for RTR SD45/SD40 with Included extended Dog-Bone universal - 2pcs.
Features
Used with the DCC-Sound Ready underframe only. Earlier models that do not have the Sound Ready starburst on the box will be able to obtain the underframe (ATH98542) separately.
Simple Installation
Molded on motor saddle mounts
Included extended Dog-Bone universal
Included mounting screws
Balanced Flywheels
DCC Ready- NMRA 8 pin and Decoder Harness plugs
Pre-soldered motor wire leads
- For Models produced after 8/2013
Overview
Three benefits to Genesis power to your RTR Locomotives:
Streamlined DCC speed curves
Lower motor current draw
Quieter motor operation for DCC Sound
Note - only 2 Included extended Dog-Bone universal - not 6 as pictured
EMD F3A w/ DCC & Sound - New York Central - Lightning Stripe #1621
Completely assembled with a powerful, smooth drive, wire handrails and grab irons.
Signal Extension Cable - All Scales Signal System Long - 72inch 183cm
WoodLand Scenics N Scale Retaining Walls Six Concrete Sections
Easy to color
Realistic detail
Meets NMRA specifications
High density castings
Track Maintenance Roto Wheel Cleaner Replacement Roto Pads for HO Scale, N Scale Tracks
Replacement pads for Roto Wheel Cleaner(#785-4561 HO and 785-4560 N), sold separately.
Easy to apply
Will not scratch wheels
HO EMD GP7 - DC/DCC Ready - Erie Lackawanna EL #1221
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
EL FEATURES:
Re-Lettered Erie units; post 1960
Dynamic or non-dynamic, depending on road number
Two single-chime horns
-Canvas- sunshades
Long-hood-forward operation
Curved spark arrestors
In 1960, the Delaware, Lackawanna and Western Railroad merged with the Erie Railroad to form Erie-Lackawanna. The Erie had owned a sizeable number of EMD GP7s, which were all less than 10 years old at the time of the merger and still giving good service. Rather than spend precious money to repaint these units immediately, the EL decided to retain the Erie paint scheme, but omitted the -wings- on the ends of the units and added their own logos. The units continued in this guise until the mid-to-late 1960s when most were repainted in the grey-and-maroon EL scheme.
ROAD NUMBER SPECIFIC FEATURES:
#1207 Dynamic brakes
#1214 Dynamic brakes
#1221 Non-dynamic brakes
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SmokeBox Graphics HO Reweigh Patches 1960-1974
Decal set with patch data for reweighed freight cars. Covers dates from 1960-1974 (change in allowable axle load thru COTS). Weights for 50, 70, and 100 ton cars, plus repack and brake test stencils. Two styles, 60+ reweigh stations. Includes 8.5x11 fold-out sheet guide with prototype information
HO Scale Battery Tubs/ Wells - 4pkg
These tubs/wells were used by many railroad lines before AC power became readily available. This is a package of four.
HO Norfolk Southern G41A Repaint 1976 w/o Hoods PRR Shops G41A Coil Car
NS GP67 Repaint 2005+ is an exciting release for us. NS rebuilt some of their G41A cars around 2000 and placed them in the GP67 class. These rebuilds were changed from 6 troughs to 5 troughs to accommodate larger diameter coils. This major change, along with yellow trough bracing, makes these cars really stand out in the crowd. The Tangent offering picks up in 2005+, where the NS cars have received their conspicuity stripes. The troughs received not-so-subtle wide white stripes down the centerline of the car to assist loading. If you read the data carefully, you will find accurate 50 Year Life Extension stenciling and painted diamonds labeling the cars for HOT steel coil service. The 125-Ton trucks feature NS reporting mark and car numbers along with 38in wheels and rotating Timken caps. These are some HOT cars for the modern era.
SPECIFICATIONS:
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
N Scale Roundhouse Kit
Plastic model that assembles easily.
Molded in mutliple colors for added realism.
Modular construction for easy expansion.
Brick detail.
3-stalls spaced at 15 degrees with opening doors.
Each stall fits maximum 8 inch locomotive over couplers.
Two different styles of ventilators.
An office which can be positioned in multiple locations.
Designed to work with Atlas N scale turntable (#2790) and motor drive (#2791).
Model can be painted and weathered to match box photo.
Add more roundhouse units to your model railroad layout to create a bigger facility.
Assembly instructions.
HO scale Picket Fence - Kit
Easy-to-assemble HO Scale Fences from Woodland Scenics feature modular design and include gates, detailed hinges and planter pins for easy installation. Each fence kit includes parts to build 192 scale feet of fencing. Fences for all kinds of scenes are available as part of the line of Woodland Scenics N Scale scenery details.
4mm Static Grass - Autumn Grass (20g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. Mixing various lengths and colours of grasses can produce highly realistic textures and effects.
N Scale Short-Shank Body-Mount Coupler - Bulk Pack Kit (10 Pair)
This kit contains:
(x20) coupler knuckle shanks, ( PN #001 95 251)
(x20) coupler lip shanks (PN #001 95 295)
(x20) snap-together draft gear boxes (PN #001 95 101)
(x20) lids (PN #001 95 165)
(x20) shims (PN #001 95 522)
(x20) centering springs
(x20) 00-90 screws
(x20) trip pins (enough parts to make 10 pair #1015 couplers)
Golden Taklon Detail Brush Set (4pcs)
Round Taklon Brushes with synthetic filament.
Includes 4 Round Brushes, sizes: 1 each of 2/0, 0, 1, 2
- Can be used in all kinds of paints: water, oil, enamels, varnish, lacquer, bronzes, etc.
Cleaning:
After using in water colors, simply clean with soap and warm water and shape to a point. If used in paints other than water colour, clean brush with thinner and wash out thinner with warm water and soap and shape. Allow brush to dry thoroughly before reusing in anything except water color.
9ml pan (D) - Paynes Grey Tint
Each PanPastel Color is loaded with the highest quality artists pigments; and is made using a unique manufacturing process requiring minimal binder, resulting in rich, ultra soft and low dust colors. PanPastel Colors can be mixed for an infinite palette of colors.
Each pan contains 9ml (0.30 fl oz) of color. 40percent more than the average pastel stick, and yielding approx. 4-5 times more coverage.
Taklon Spotter Detail Brush Set (4pcs)
Set Includes Sizes: 0, 3/0, 5/0, 10/0
Lamp Post Street Lights - 3 units
Use to light depots, rail yards, alley ways, sidings, parking lots and more. 20mA/set. RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 1.125 in h x .125 in w (25 mm h x 2 mm w)
Lumberjacks - Scenic Accents(R)
HO 40Ft PS-1 Boxcar - ATSF (Bx57 Grand Canyon) #31671
Date: BLT 5-50
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
N Scale Single Track Straight Viaduct - 7-5/16inch (18.6cm) - 2pkg
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated.
Theres no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and youre ready to go.
HO 70-Ton 12-Panel Hopper - Pennsylvania (H39 Arched Ends) #274001
Blt.7-58
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CWSX #140078
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Sunbathers Standing & Lying (6 pkg)
Details Badende
The -Bathers- figure set contains a group of 6 bathers in various different poses.
Evergreen Scale Models 113 Opaque White Polystyrene Strips 14in .015x.060 (10pcs pkg)
Dimensions: 70 X 40 Scale Feet / 9-5/8 X 5-1/2 Inches - kit
This kit is designed with cut lines on the back side of the walls so that door and window locations are optional. Kit includes doors, windows, roof vents and down spouts.
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Weyerhaeuser #1102
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Z/N/HO Scale 1 Amp Wired Mobile Decoder
- Size: .55 x .4 x .148 inch
- 14mm x 10.23mm x 3.77mm
- Z/N/HO Scale
- 1.0 Amp/1.5 Amps Peak
- 4 FX3 Functions, 0.5 Amp
- FX3 Function outputs for prototypical lighting effects and on/off control:
- Constant Brightness Lighting with directional or independent control.
- Optimized selectable LED or incandescent lamp operation
- Realistic Effects like Ditch lights, Mars lights, strobes, and many more
- Configurable Pulse Function available on all function outputs.
- FX3 & Standard Function Qualifiers operate functions based on direction,
- F0 on or off, direction and F0, and whether loco is moving.
- Function Mapping for custom function setup.
- Master Light Switch turns off all lights & functions with one keystroke.
- Advanced Consist Function Controls.
- Digitrax LocoMotion® System-Your locomotives look like the real thing.
- The Digitrax LocoMotion System makes them run like the real thing, too!
- Scaleable Speed Stabilization (Back EMF) with simple setup & 256 level resolution.
- Torque Compensation.
- 128 Speed Step operation (14 or 28 steps can also be used).
- Momentum with acceleration and deceleration.
- Normal Direction of Travel is user selectable.
- Switching Speed feature for easier and faster access to yard speeds.
- 3 Step Speed Tables set start, mid and max voltage for custom control.
- 28 Step Speed Tables with 256 level resolution for precise control.
- Program CVs using any Digitrax Compatible Control system without havingto buy any extra equipment.
- 2 Digit and 4 Digit Addressing.
- Basic, Advanced & UniVersal Consisting.
- SuperSonic motor drive for silent operation.
- Direct mode programming.
- Decoder Reset CV with or without speed table reset.
- Transponder Equipped ready for transponding on your Layout.
- Motor Isolation Protection helps prevent damage to your decoder.
- Automatic Analog Mode Conversion when running on DC layout.
- Decoder Lock for individual programming of multiple decoders in one loco.
Tangent Scale Models HO V3 PS4750 Covered Hopper CNW Ex-ROCK Blue w/ White CNW
CNW Ex- ROCK -Blue w/ White CNW- V3 is a second banditized ROCK scheme variation. After the ROCK bankruptcy, CNW and other railroads assumed ownership of former ROCK freight cars, including this series of PS4750s. We have represented some aging of the car body color with faded blue paint. For this version, the large R and The Rock and the reporting mark/number have been painted out. A black CNW herald has been added to the upper right corner of the car, just like the prototype.
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
Wiring Connector for Tortoise Switch Machine - 12-Volt
Accu-Lites SNAPS! is an easy wiring connector for the Tortoise Slow Motion Switch Machine. It is composed of a connector that SNAPS onto the Tortoise and an eight-position wiring block for wiring up the Tortoise.
NOTE: These are used for the older switch machines!!
HO SD45-2 - DCC Ready - HATX #912
Era: 1991-2009
HATX FEATURES:
These two units came to the Helm Atlantic fleet in the 1990s from CSX. Helm never got around to painting them so their previous owners tattered and faded paint schemes give these models a unique look.
ROAD NUMBER SPECIFIC FEATURES:
#912
- Ex-Clinchfield unit
- High number board headlight arrangement
- Sinclair radio antenna
#913
- Ex-Seaboard Coast Line unit
- Nose mounted headlight
- Whip style radio antenna
SD45-2 LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18 inches
- Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO Class D10g 4-6-0 - DC/Silent - Canadian Pacific #926
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
Trinity 3-Bay Hopper - BORX, pkg(3) #1
ETA: October 2021
Detailed Information
MODEL FEATURES:
Two body styles represent 10-panel and 12-panel variations
New body styles N including BNSF with stiffeners
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Coupler cutbar and Air hose on each end
Separately applied end cages and etched end platforms
Photo-etched metal roofwalk
Weighted for trouble free operation
Machined metal wheels
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Standard size coupler draft gear box with screw mounted lid
Fully assembled and ready for your layout
Replacement parts available
Minimum radius: 18inch
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
PROTOTYPE AND BACKGROUND INFO:
Trinity Steel was founded by C. J. Bender in Dallas in 1933. The company didnt enter into the railroad freight car market until 1984, when Trinity acquired the railcar designs and production facilities of the Pullman-Standard Car Manufacturing Company, once the largest railcar manufacturer in North America. That same year Trinity also acquired the railcar designs of General American Transportation Corporation. In 1986 the rail car designs and production facilities of Greenville Steel Car Company were purchased, including the auto rack designs of Portec-Paragon. Also acquired in 1986 were the railcar designs of North American Car Corporation, and in 1987 Ortner Freight Car was acquired.
With this collective experience across several facilities, Trinity developed many new designs that became ubiquitous to present day railroading. One of their most famous designs is the 3-bay 5161cuft covered hopper. This covered hopper is optimized to transport agricultural products, sugar, dry chemicals, or other similar products and can be seen in unit train assignments all over North America. Introduced around 1995, these cars are extremely common today and owned by many Class 1 and short line railroads alike.