Faller 170492 - Expert Liquid Cement - Glue (25g)
Expert Liquid Cement - Glue (25g)
Bob Smith Industries 126 Super-Gold 1/2 oz
BSI Super-Gold insta-cure
Bob Smith Industries 302 - Extra Fine Extender Tip (6pcs)
Extra Fine Extender Tip (6pcs)
Woodland Scenics 195 - Hob-e-Tac Adhesive - 2 fl oz
Hob-e-Tac Adhesive - 2 fl oz
Bob Smith Industries 105 - Plastic-Cure Brush-On Gap Filling Cyanoacrylate Glue (.5oz)
Plastic-Cure Brush-On Gap Filling Cyanoacrylate Glue (.5oz)
Bob Smith Industries 301 - Extender Tip (6pcs)
Extender Tip (6pcs)
Testors Corp. 3501 - Cement for Plastics/Polystyrene - 5/8 fl oz Tube
Cement for Plastics/Polystyrene - 5/8 fl oz Tube
Bob Smith Industries Insta-Set 2fl.oz. spray
Bob Smith Industries Insta-Set 2fl.oz. spray
Bob Smith Industires Slow Cure 30 Minute Epoxy (4.5oz)
Bob Smith Industires Slow Cure Epoxy 4.5oz
Woodland Scenics 644 Static-Tac - Field System - Adhesive Glue
12 fl-oz- 354 mL Adhesive Glue
Bob Smith Industires Mid Cure Epoxy
Bob Smith Industries Mid Cure Epoxy
Bob Smith Industries Maxi-Cure Extra Thick Glue 1/2 OZ
Maxi-Cure Extra Thick Glue 1/2 oz
Woodland Scenics 5161 - ReadyGrass Mat Accessories - Mat Adhesive - 7oz
ReadyGrass Mat Accessories - Mat Adhesive - 7oz
Bob Smith Industries Insta-Cure 2 Oz Gap Filling medium
Insta-cure Glue
AK Interactive 118 Gravel and Sand Fixer Enamel 100ml
Enamel adhesive
Bob Smith Industries Insta-Clean Sticker Residue Remover 2oz
Insta-Clean Sticker Residue Remover
Peco PSG-10 - Static Grass Basing Glue
Static Grass Basing Glue
Bob Smith Industries 101 Insta-Cure 1/2 oz Super Thin
Insta-cure Glue
Bob Smith Industries Un-Cure 1 Oz
Un-Cure CA remover
Bob Smith Industries 116 Insta-Cure Coral Frag Glue .7oz
Insta-Cure Coral Frag Glue .7oz
Pacer Technology 56 - ZAP Formula 560 - Canopy Glue (2 fl.oz.)
ZAP Formula 560 - Canopy Glue (2 fl.oz.)
Bob Smith Industires 201- Quick-Cure 5 Minute Epoxy (4.5oz)
Bob Smith Industries Quick-Cure 5 Minute Epoxy (4.5oz)
Bob Smith Industries Super-Gold 1/2oz Glue
BSI Super-Gold insta-cure
Woodland Scenics 190 Scenic Glue
Scenic Glue
Woodland Scenics Field System 643 Tuft Tac
Tuft Tac
Peco PSG-13 - Pump Action Layering Spray
Pump Action Layering Spray
Bob Smith Industries Super-Gold 1oz
BSI Super-Gold insta-cure
Bob Smith Industries 120 Insta-Flex Clear Rubber-Toughened CA Glue 1oz
Bob Smith Industries 119 Insta-Flex Clear Rubber-Toughened CA Glue 10z
Bob Smith Industries 141 Foam Cure, 30ml
Bob Smith Industries 141 Foam Cure, 30ml
Bob Smith Industries 119 Insta-Flex Flexible Thin CA Glue 1oz
Bob Smith Industries 119 Insta-Flex Flexible Thin CA Glue 1oz
Bob Smith Industries - Extra Long Extender Tip (4pcs)
Extra Long Extender Tip (4pcs)
Bob Smith Industries Maxi-Cure Extra Thick Glue 2oz
Maxi-Cure Extra Thick Glue
Microscale MI11 - MicroBond Advanced Adhesive for Slippery Plastics - MicroPrep (1-1/2oz)
MicroBond Advanced Adhesive for Slippery Plastics - MicroPrep (1-1/2oz)
Bob Smith Industires 202- Quick-Cure 5 Minute Epoxy (9oz)
Bob Smith Industries Quick-Cure 5 Minute Epoxy (9oz)
Bob Smith Industries 322 - Fine Tip Non-Clog Glue Applicator (4pcs)
Fine Tip Non-Clog Glue Applicator (4pcs)
Flex-i-File Plast-I-Weld Solvent Cement 2oz
Flex-i-File Plast-I-Weld Solvent Cement 2oz
Bob Smith Industrie 152 - Insta-Set CA Glue Accelerator - 8oz Bottle
Insta-Set CA Glue Accelerator - 8oz Bottle
Bob Smith Industries 102 Insta-Cure 1 oz Super Thin
Insta-cure Glue
Testors Corp. 281216 - Liquid Cement for Plastics 1 oz
Liquid Cement for Plastic 1oz
Tamiya Paints 87038 Liquid Plastic Cement - Extra Thin - 1.4oz 40mL - Glue
Liquid Plastic Cement - Extra Thin - 1.4oz 40mL
Walthers Goo 1oz 29.lmL Tube
Walthers Goo 1oz 29.lmL Tube
Bob Smith Industries Insta-Cure 1/2 oz
Insta-cure Glue
Woodland Scenics 198 - Scenic Accents Glue - 1.25oz (37mL)
Scenic Accents Glue - 1.25oz (37mL)
Faller 170490 - Super Expert Liquid Cement - Glue (25g)
Super Expert Liquid Cement - Glue (25g)
Woodland Scenics 1445 Low Temp Foam Glue Gun
Low Temp Foam Glue Gun
Testors Corp. 3511 - Contour Modelling Putty - 5/8 fl oz Tube
Contour Modelling Putty - 5/8 fl oz Tube
Bob Smith Industries Maxi-Cure Extra Thick Glue 1oz
Maxi-Cure Extra Thick Glue
Bob Smith Industries 321 - Regular Tip Non-Clog Applicator (4pcs)
Regular Tip Non-Clog Applicator (4pcs)
Bob Smith Industires Slow Cure 30 Minute Epoxy 9oz
Bob Smith Industires Slow Cure Epoxy
Bob Smith Industries Insta-Cure 1 Oz Gap Filling medium
Insta-cure Glue
Expert Liquid Cement - Glue (25g)
Faller Super Expert Liquid Plastic Cement bonds plastics quickly and permanently and is the choice of experienced modelers. The easy-to-handle bottle features a special hollow needle applicator and protective cap.
BSI-127 Super-Gold Insta-Cure Odorless thin glue 1/2 Oz
SUPER-GOLD+â„¢ is our odourless INSTA-CURE CA
Non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes.
The SUPER-GOLDs do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic.
SUPER-GOLD is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET to one piece and apply SUPER-GOLD+â„¢ to the other before joining. Excess INSTA-SET may create too much heat, which can melt the foam. Both SUPER-GOLDs cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Size 14.25g/ 1/2oz
Item: BSI-126
Extra Fine Extender Tip (6pcs)
For use over the standard top, it allows BSI thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a time.
Thin CA tends to run everywhere, so these allow precise application.
Hob-e-Tac Adhesive - 2 fl oz
Hob-e-Tac is a multi-purpose, water-soluble, high-tack adhesive. It is perfect for attaching clump-foliage to tree armatures. Also, use to glue field grass and fine-leaf foliage to your layout.
Plastic-Cure Brush-On Gap Filling Cyanoacrylate Glue (.5oz)
Features:
-CA glue with a brush on applicator
-Easy to use – Brush on one surface and hold tightly for 10 seconds.
-Fast Drying!
-Bonds most plastics.
Plastic-Cure is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in many cases is an easier way to apply the CA. As long as brush is put back into the bottle after use, the bristles of the brush will not harden. Care must be taken, however, not to introduce foreign material into the bottle. The brush should not be used, for example, to apply CA to wood that has been freshly sanded. Plastic-Cure will also bond wood, but its brush applicator at times will not be the best way to apply it. Plastic-Cure is superior for the application of false nails and wraps on fingernails, where its brush is the preferred method of application.
Extender Tip (6pcs)
For use over BSIs standard #312 top. Can be used with all thicknesses of CA except IC-Gel.
The flexible tip can be cut to the length and/or inside diameter that is needed for a particular application.
Cement for Plastics/Polystyrene - 5/8 fl oz Tube
Cement for Plastic Models is specially formulated for joining all polystyrene plastics and can be used in the construction of plastic model kits and may also repair many common household products made of polystyrene or ABS plastics.
DIRECTIONS FOR USE:
Pre-assemble parts without cement to insure proper fit. Trim or file where necessary. When cementing painted or plated parts, scrape away paint or plating from surfaces to be joined. Apply cement sparingly to one surface and press firmly together.
AVOID CEMENT ON FINGER TIPS, AS GLUE SMUDGED ON AREAS NOT TO BE JOINED CANNOT BE REMOVED.
It will also discolor or cloud up clear parts.
Do not use on clear parts.
Bob Smith Industries Insta-Set 2fl.oz. spray
Accelerator
Foam safe
compatible with plastic and foam
for all CS glues
Bob Smith Industires Slow Cure Epoxy 30 Min 4.5oz
Bonds wood, metal, foam, and fiberglass
Strong waterproof with 4500 PSI bonds
12 fl-oz- 354 mL Adhesive Glue
Woodland Scenics Field System Static-Tac is specially formulated and has the right viscosity for adhering Static Grass and Briar Patch. It comes in a bottle with a graduated tip that works for large or small areas. Static-Tac is an easy-to-spread adhesive that dries to a clear matte finish for realistic results.
Bob Smith Industries Mid Cure Epoxy 15 Min
Bonds wood, metal, foam, and fiberglass
Strong waterproof with 3800 PSI bonds
BSI-111 Maxi-Cure Extra Thick Glue 1/2 oz
ReadyGrass Mat Accessories - Mat Adhesive - 7oz (207mL)
Product Information
Use for permanent or temporary mounting of ReadyGrass Mats on any surface; can also be used for mounting puzzles and posters to art board.
BSI-107 2 Oz
Gap Filling Medium- 5-10 sec Glue
Adhesive to fix down all kinds of earth, gravel, small stones, sand, etc to your bases. This special adhesive, with an alcohol base, is much more effective than the traditional white glue. The white glue tends to leave a plastic finish over the surface giving an unreal aspect and also tends not to expand well through the material. But this new adhesive expands rapidly and is adsorbed by the stones and sand saving a lot of time when fixing down rubble for example. This product is easily cleaned using alcohol, can be applied using an airbrush or paint brush and the drying process can be accelerated with a hairdryer or any other type of heat source. Although it’s matt when it dries, on smooth surfaces it can leave a light satin mark, however, this can be removed with a matt varnish.
Original product of AK-interactive, don’t choose copies.
BSI-100 2 oz
Insta-Clean Sticker Residue Remover
Works on all surfaces, including: glass, cardboard, plastic, fiberglass and everything else. INSTA-CLEAN is ideal for removing price stickers and their adhesive residue. INSTA-CLEAN will also remove scuff marks that regular household cleaners wont touch.
Static Grass Basing Glue
BSI- 101- Super Thin 1-3 Sec Glue
BSI-161 Un-Cure CA remover 1 Oz
Insta-Cure Coral Frag Glue .7oz
IC-GEL is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE. IC-GEL, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL that you want.
IC-GEL is an excellent putty for plastic models. It will fill any void and can be formed to many shapes. Applying INSTA-SET allows IC-GEL to be sanded or filed to final shape in less than 20 seconds. Autobody repair workers have finished their jobs in a fraction of the time by using IC-GEL with the additional advantage over normal body putties of superior bonding to metal surfaces.
IC-GEL?s most popular application is for the bonding of fragments of live coral (frags) to underwater rocks in aquariums. It has proven to be non-toxic to aquatic organisms and provides instant bonding for the propagation of the coral. IC-Gel has a superior shelf life of over three years and its application nozzle makes it the easiest of all CAs to apply.
ZAP Formula 560 - Canopy Glue (2 fl.oz.)
- Clear, fast drying
- Bonds canopies & plastic parts to almost anything!
- Remains flexible
Bob Smith Industries Quick-Cure 5 Minute Epoxy (4.5oz)
This is a nine ounce package of Bob Smith Industries QUIK-CURE 5 Minute Epoxy. QUIK-CURE 5 Minute epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE shouldnt be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE is the only BSI epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE can be handled after 15 minutes. Full strength is reached in 1 hour.
BSI-121 Super-Gold Insta-Cure Odorless thin glue
Foam Safe
Scenic Glue
Formulated especially for model landscaping. Dries clear with a matte (flat) finish, is flexible and leaves no residue. Use to attach various foliage, bushes, underbrush and lichen. Does not become brittle after drying.
Tuft Tac
-Model tufts of grass
-High tack adhesive
-Repositionable
-Water soluble
Pump Action Layering Spray
BSI-127 Super-Gold Insta-Cure Odorless thin glue 1 Oz
Foam Safe
Bob Smith Industries 119 Insta-Flex Clear Rubber-Toughened CA Glue 10z
Insta-Flex+ clear rubber toughened has similar qualities to our black IC-2000 but can be used in applications where you do not want the adhesive to be seen. The carbon component of IC-2000 that gives the CA its black color also contributes to its unsurpassed strength. Since INSTA-FLEX+ has this carbon removed, its strength is a little less than IC-2000 but still superior to standard CA's. When esthetics are important and a flexible bond is required, INSTA-FLEX+ is your best choice. It forms superior bonds to soft urethane and vinyl plastics. Both INSTA-FLEX and INSTA-FLEX+ work well when bonding R/C car tires. When a joint has a larger than normal gap, flexible CA's provide superior shock resistent bonds.
Bob Smith Industries 141 Foam Cure, 30ml
Bob Smith Industries 119 Insta-Flex Flexible Thin CA Glue 1oz
Extra Long Extender Tip (4pcs)
For use over the standard top, they provide a rigid tip with extended length to get thin and gap filling CA into hard to reach areas.
They are very resistant to clogging and can be cleaned by soaking in acetone.
BSI-113 Maxi-Cure Extra Thick Glue 2oz
MicroBond Advanced Adhesive for Slippery Plastics - MicroPrep (1-1/2oz)
Made especially for gluing slippery engineering plastics such as Delrin, Celcon and others, this adhesive system is ideal for attaching and repairing the handrails and other fine details on many of todays cars and locos. MicroBond has sheer strength and stands up to expansion and contraction of different materials, so it can be used on rubber, assorted ABS and styrene plastics, brass, steel, resins, leather, wood and more (not intended for foam surfaces). Bonds in one minute, cures in five. When using with engineering plastics, treat the bonding surface with MicroPrep (sold separately) before gluing.
When working with difficult to bond surfaces, such as those made of Delrin, Celcon and other engineering plastics, apply MicroPrep first. Simply apply with brush or use the spray action nozzle and allow to evaporate before gluing with MicroBond (sold separately) or painting with your favorite paint (enamels tend to adhere better after longer evaporation).
Bob Smith Industries Quick-Cure 5 Minute Epoxy (9oz)
This is a nine ounce package of Bob Smith Industries QUIK-CURE 5 Minute Epoxy. QUIK-CURE 5 Minute epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE shouldnt be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE is the only BSI epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE can be handled after 15 minutes. Full strength is reached in 1 hour.
Fine Tip Non-Clog Glue Applicator (4pcs)
6 inch long pipette for the application of thin CAs. Can also be used for the fine application of Insta-Set accelerator and for applying fine lubricating oils. CA can be kept in the applicator for two weeks.
Flex-i-File Plast-I-Weld Solvent Cement 2oz
Water-clear plastic fusing adhesive. Dissolves a thin layer of each surface to form a welded joint. Makes permanent bonds on ABS, Styrene, Butyrate and Acrylic plastics.
Insta-Set CA Glue Accelerator - 8oz Bottle
Insta-Set is a catalyst which acts as an accelerator ( activator ) that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization.
INSTA-SET in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together.
Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET significantly enhances a joints strength. For difficult to bond materials, INSTA-SET can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
BSI- 102- Super Thin 1-3 Sec Glue 1oz
Liquid Cement for Plastics
Fast-Drying Liquid Cement with Precision Applicator; Use for polystyrene and ABS plastic; Bonds plastic by dissolving and cementing; Precision applicator makes easy work of gluing even small intricate detailed parts.
AVOID CEMENT ON FINGER TIPS, AS GLUE SMUDGED ON AREAS NOT TO BE JOINED CANNOT BE REMOVED.
It will also discolor or cloud up clear parts.
Do not use on clear parts.
Liquid Plastic Cement - Extra Thin - 1.4oz 40mL
For styrene, thin formula allows for precise application, with applicator brush.
Walthers Goo 1oz 29.lmL Tube
GOO(R) is the all-purpose adhesive that grips almost anything. It never lets go. GOO is perfect for building or repairing jobs on your layout and around the house. The easy contact action of GOO produces fast-setting joints with any material. GOO works with all types of metals including steel, brass, aluminum, copper and more. It also works on plastic, wood cardboard, china, leather, vinyl, ceramics, paper, concrete and many more surfaces. GOO is a permanent rubber base adhesive that s shockproof-its as flexible as rubber. Joints won t crack when flexed back and forth, won t break loose when the temperature changes and won t weaken when wet or damp. It sticks forever! Repair shoes.
For more precise applications of GOO right from the tube, pick up a pack of Micro Tips (#904-302)! Easily added to GOO tubes or most any 3/16 inches diameter glue nozzle, the end can be trimmed for a faster/wider application if needed.
BSI-106
Gap Filling Medium- 5-10 sec Glue
Scenic Accents Glue - 1.25oz (37mL)
Specially formulated to attach Scenic Accents or any type of figure or detail to a layout or diorama. Figures can be positioned without waiting for glue to dry. And since it stays tacky, they can be placed in one position, picked up and moved to another without regluing at any time. Accent Glue leaves no puddles or residue. Its water-soluble and a small brush applicator is included.
Super Expert Liquid Cement - Glue (25g)
Faller Super Expert Liquid Plastic Cement bonds plastics quickly and permanently and is the choice of experienced modelers. The easy-to-handle bottle features a special hollow needle applicator and protective cap.
Low Temp Foam Glue Gun
The Glue Gun, with Low Temp Foam Glue Sticks, operates at a temperature that will not damage foam and it bonds instantly. Bonds to foam, plastic, wood, paper and many other craft materials. Two glue sticks are included. 120v - 40Watt - 300mA
Use only Woodland Scenics Low Temp Foam Glue Sticks (ST1446)
Contour Modelling Putty - 5/8 fl oz Tube
Testors Contour Putty is used for filling seams, gaps, and creating custom features on plastic models. Dries to a hard light gray finish that can be sanded and painted.
BSI-111 Maxi-Cure Extra Thick Glue 1oz
Regular Tip Non-Clog Applicator (4pcs)
6 inch long pipette for the application of gap filling and extra-thick CA. CA is sucked up into the applicator by inserting it into an open CA bottle with the bulb at the end compressed, like an eyedropper.
Bob Smith Industires Slow Cure Epoxy 30 Min 9oz
Bonds wood, metal, foam, and fiberglass
Strong waterproof with 4500 PSI bonds
BSI-107 1 Oz
Gap Filling Medium- 5-10 sec Glue