HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) (6pkg) #1
Road Numbers Included: 286280, 286307, 286320, 286346, 286365, 286401
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
HO GP9RM - DCC & Sound - Canadian National (Large Noodle) #7009
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
N Scale ACF 3560 Center-Flow Covered Hopper - Cancarb ACFX #74080
Features:
Prototypical painting and lettering
Plastic body with die cast chasis
Removable coal load
Product Information
The Atlas Trainman ACF 3560 Center-Flow Covered Hopper is based on common steel cars used by many railroads for handling potash, fertilizers, chemicals and more. It features an injection-molded body with applied plastic details where appropriate, smooth paint, crisp lettering and AccuMate(R) knuckle couplers.
Evans X72 Box car: Conrail Large Logo - Single Car #266873
Detail Variations:
As operated between 1976 to the 1990s.
6-pack includes the following numbers:
#266873
#266899
#269252
#269325
#269377
#269423
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
BNSF w/ PTC #5915
BNSF Features:
All units feature new BNSF style cab roof antennas
Antenna Dome
PTC antenna in polybag
Variety of in-service details per protype road number
Narrow front snowplow
Nose door with window
High number boards
4-window cab side windows
Desktop control stand
Sunshades
Salem air filter
Rear brake wheel
Hi-adhesion trucks
High rear sand filler
Low rear vertical headlight
GENESIS DIESEL LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Replacement parts available
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included
Road number specific features:
#5915
Silver -replacement- plow
HO Scale - 1946-55 Fruehauf Livestock Trailer - Unpainted and Resin Cast Kit
HO Gunderson 6276 50Ft Plate F Boxcar - BKTY #156881
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
HO Kenworth W900L Sleeper Cab Tractor w/Pneumatic Bulk Trailer - Red, White, Chrome
ESU Cable Harness with 8 pin socket according to NEM 652, DCC Colour Wire, Length = 11.81inch 30cm
N Scale Short-Shank Body-Mount Coupler - Bulk Pack Kit (10 Pair)
This kit contains:
(x20) coupler knuckle shanks, ( PN #001 95 251)
(x20) coupler lip shanks (PN #001 95 295)
(x20) snap-together draft gear boxes (PN #001 95 101)
(x20) lids (PN #001 95 165)
(x20) shims (PN #001 95 522)
(x20) centering springs
(x20) 00-90 screws
(x20) trip pins (enough parts to make 10 pair #1015 couplers)
N Scale 4-Bay Cylindrical Grain Hopper - Potacan
Features include:
- NMRA profile wheels
- needle-point axles
- body-mounted E-Z Mate(R) Mark II couplers
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - PTTX #93493
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO SD70M - DCC & Sound - Ontario Northland/ONT Flared #2121
Detailed Information
ONT FEATURES:
Ex-NS
EMD deck mounted front and rear ditch lights
PTC antenna array
Late 4-panel radiator body
Late sloped EMD cab nose
Small EMD front plow
Late EMD trucks with exposed bearings
The Ontario Northland Railway is operated by the Ontario Northland Transportation Commission, part of the government of Ontario, Canada. During late 2022, ONT purchased a small batch of ex-NS flared SD70Ms. As of recently, only 2 have been repainted so far. We are offering both as new additions to your model railroad!
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low profile? Barber S-2-A with Timken rotating caps
Wheels: CNC-Machined 36in Wheels
Detroit Toledo & Ironton (DTI) Delivery 1970 Magenta shows off one of the most-requested paint schemes for the Tangent Greenville 86ft Box Car System. We appreciate the patience of DT&I modelers, as we wanted to get this car right with the correct 1970 Greenville body with accurate DT&I Magenta paint and lettering. This Magenta DT&I group totaled 54 cars ? It was also the first group to be delivered for use in the new Ford Brownstown Parts Distribution facility pool. Yes, these cars were pooled, so that means these beautiful Magenta 86ft giants served Ford US Parts Depots coast to coast in the Ford BRO pool lanes. Note the prototype photo on our website that shows a DT&I BRO car behind a GN painted, BN-restenciled SD45 presumably photographed on BN headed to Seattle. The DT&I cars feature the distinctive Brownstown body style, with extra vertical rivet rows at the ends of the side sheets. An accurate End-Of-Car Cushioning underframe shows off the 100-Ton Low profile Barber S-2-A trucks, 36in wheels and Timken rotating caps.
HO EMD SW9 - DC/ Silent - Santa Fe (ATSF Bookend Scheme) #2435
Santa Fe:
Delivered in 1953
Unique stepped louvers on hood
-Trash can- style spark arrestors
Large cab sunshades on front and rear cab windows
Carbody handrails
Working Pyle 360 warning light
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO International 4900 Crew Cab Fire Truck - Red
Keep your HO cities safe with a fleet of SceneMaster vehicles on the job! Typical of equipment serving communities big or small, features include:
- Licensed replica of popular International trucks
- Must-have for HO model railroads
- Perfect size for collectors
- Positionable parts on many models
- Fully assembled and painted
- Die-cast metal and plastic parts
This medium-duty truck line was introduced in the late 1980s. Powered by a Navistar DT inline six-cylinder diesel engine capable of up to 350 horsepower, the 4900 series has been a great starting point for a wide range of commercial vehicles, including delivery vans, single- and dual-axle semi tractors, as well as fire apparatus and other government applications.
INTERNATIONAL(R) and other International Truck trademarks are licensed by International Truck Intellectual Property Company, LLC.
Rough-Edged Paint Out Blanks
Decal set with a variety of shapes and sizes of blank paint patches in 5 colors - light gray, oxide red, mineral red, boxcar red, and black.
HO Chocolate Factory - Kit
Here is a great trackside industry for your contemporary HO railroad! The Cornerstone Chocolate Factory is typical of regional specialty producers supplying chocolate to other food producers. A super value with three detailed structure kits and accessories, check out these additional features:
- Separate two-story brick office
- Large main building w/truck pull-in and loading dock
- Railcar and truck receiving building
- Gravity-feed upright storage tanks
- Pipe bridge w/piping
- Unloading/loading rack for tank cars, hoppers and semi-trailers
- Roof-top vents and three large air conditioners, electrical equipment box and meters, truck docks with weather bellows, roadside sign
- Easily adapted to other modern industries w/road and rail access
- Molded in 4 colors with clear acetate
DIMENSIONS:
Main Building: 20-13/16 x 9-3/8 x 6-3/16 inches (53 x 23.7 x 15.6cm)
Receiving Building: 8-7/8 x 5-15/16 x 4-1/2 inches (22.4 x 15.1 x 11.6cm)
Storage Tanks: 4-7/16 x 2-3/16 x 7-1/2 inches (11.2 x 5.54 x 19cm)
Office: 5-29/32 x 3-1/2 x 2-15/16 inches (15 x 9 x 7.4cm)
N Scale Flexi Flo Hopper (Early) - Penn Central (Ex NYC Patchout) - 6-pack
Road Numbers Include:
#897802
#897808
#897812
#897813
#897815
#897823
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
Russell Snowplow - Ready to Run - Great Northern #X-1520 (Big Sky Blue)
Product Information
Take on winters worst with a WalthersProto Russell Snowplow on the job! In service since the 1920s, all-steel plows like this are a must have for railroads big and small, and look great spotted on a siding or near the engine shed during the warmer months too! Completely retooled and superbly detailed, each HO Scale model features:
Limited edition - one time run of these roadnumbers!
Prototypes in service 1920s to present
Fully-assembled, railroad ready - undecorated kit also available
Factory-installed grab irons
Complete underbody w/brake gear & piping
Custom front truck for tighter curves
Detailed flanger
Thin profile stirrups
Window -glass-
Ultra-Smooth rolling metal axles and 33inch wheelsets
Proto MAX(TM) metal knuckle coupler on rear of plow
Railroad-Specific Details:
See-through -steel- or original -wood- running boards
Sturdy hinged & positionable side wings in two styles w/wire cross braces
Fitted w/original or one of three styles of late headlights as appropriate
Bettendorf or roller bearing rear truck
HO - 24Ft Ribbed Ore Car w/Load - B&LE #20717
Detailed Information
MODEL FEATURES:
Removable load
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied brake wheel
Machined metal wheels
Weighted for trouble free operation
Solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 15inch
PROTOTYPE AND BACKGROUND INFO:
Iron ore is a rock from which metallic iron can be extracted. About 98percent of the mined iron ore is used to make steel. Many railroads around the great lakes have unit trains that transport mined iron ore to transport via barge for processing. These trains are very distinctive with train sets of small cars carrying very heavy loads of dense iron ore.
SDN144K0a w/Sound
Features:
Board replacement Mobile Sound/Motor/Function Decoder with SoundFX
Board replacement decoder for N Scale Kato P42, E8, PA1, F40 and similar locos
Dual E8/F40 diesel sound scheme pre-loaded compatible with Sound Project downloads!
Includes 13mm 8 Ohm round speaker & 330uF capacitor.
Current Rating 1.0 Amp (1.3 Amps Peak)
Size 2.15inch x 0.55inch x 0.14inch
55.5mm x 13.8mm x 3.6mm
Installation Board replacement
Function Outputs 4-200mA
Function Type FX3
N Scale 150ft Modern Highway Overpass w/4 Piers
The Rix Modern Highway Overpass for N scale is modeled after the bridges built today to span over railroad tracks. This style of bridge is typical of most new construction and is used all over the country. The Rix Modern Highway Overpass consist of 50 foot spans which interlock together so that any length bridge can be built. The piers are designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy.
Dimensions: 150 x 25 scale feet
11-1/4 x 1-7/8 inches.
Includes: Beams, railings, roadway, and 4 piers.
N Scale 100-Ton 3-Bay Ribside Open Hopper w/Tarps 4-Pack - (FOAM) - SOO Line
60839, 60853, 60867, 60899
Product Information
A coal train standard from the 1960s on, cars feature an injection-molded body, realistic load, fine paint and lettering and Magne-Matic(R) magnetic knuckle couplers.
HO GE P42DC - DCC Ready - VIA/Love The Way #908
Detailed Information
VIA FEATURES:
VIA-added extra nose light
VIA style antenna array
Dual 5-chime forward facing horns
Forward and reverse red marker lights
VIA approved artwork
Starting in 2017, VIA began to add wrapped schemes for their P42DC fleet. By 2019, -Love the Way- in both English and French was applied to a few select units with each side having a different version. In Nov. 2019, VIA applied the -Poppy- scheme, a tribute to veterans, to a small handful of units.
ROAD NUMBER SPECIFIC FEATURES:
#908
-Love the Way- scheme
English left side
French right side.
#911
-Love the Way- scheme
English right side
French left side.
#916
-Poppy- Scheme
P40DC/P42DC SERIES LOCOMOTIVE FEATURES:
Officially licensed product of Amtrak (Amtrak-painted units)
Officially licensed product of Via Rail Canada (Via painted units)
Officially licensed product of Operation Lifesaver (Operation Lifesaver-painted unit)
4 different nose variations: Amtrak as-built with strobes, Amtrak as-built without strobes, Amtrak rebuilt, and Via
Operating marker lights front and rear on Tsunami2 equipped models
Rear marker lights installed, but not connected on DCC Ready models
Newly-tooled lit number boards
Flashing strobe light and -Big-Hole- emergency light on equipped Amtrak units (Operational on DCC only)
Flashing ditch lights on non-strobe equipped Amtrak units synced with horn blow (Operational on DCC only)
Flexible rubber MU hoses
Flexible rubber trainline hose
Separately applied wire handrails
Exhaust stack
Photo etched metal radiator fan grille
Highly-detailed underframe including air tanks with air lines, air filter, and air dryer with two different types of rock shields
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting including operating ditch lights and red marker lights
Completely-redesigned die-cast frame for superior tractive effort
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
5/32 inch OD Square Aluminum Tube - 0.014inch Thick x 12inch Long
Square Aluminum Tube (1 pc)
Outside Diameter: 5/32 inch
Plastruct 90205 ABS 3/8 Square Tube (4pcs pkg)
Specifications in Inches
Height: 3/8 (9.5 mm)
Width 3/8 (9.5 mm)
Inner Diameter 1/4 (6.4mm)
Length 15
HO RTR 70 Ton 2 Ballast Hopper w/ Side Chutes - Conrail #53830
Blt. 6-53
Product Information
Perfect for work train service on our railroad, Bowser HO Scale ready-to-run 70-Ton 2-Bay Ballast Hoppers with Side Chutes (Ballast Gates) feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make these 70-Ton Ballast Hoppers welcome additions to any diesel-era freight train consist.
Deep Pour Water - Clear
Create underwater features with Deep Pour Water and Water Undercoats for submerged water scenes or to imitate depth. Add Water Tints when modeling any aquatic ecosystem and Surface Waters for the illusion of water movement and undeniable realism. Deep Pour Water dries hard and will not crack, is non-shrinking, and will not become discolored over time.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Takumi Side Feed Dual Action Airbrush
SPECIFICATIONS:
Spray Performance Category: All-Star Versatility
Series: Eclipse
Spray Scale: Fine to Wide
Optimal Working Pressure: 25 - 35 psi (0.17 - 0.24 Mpa)
Head System: E3 - Needle, Nozzle, Nozzle Cap
Nozzle Type: Compression Fit
Feed Style: Side
Paint Capacity: 0.24 oz (7 ml)
Action: Dual
Handle Type: Single Cut, Preset
Net Weight (lbs): 0.62
Net Weight (kg): 0.28
Assembled Dimensions (in): 7.75 x 1.65 x 4.32
Assembled Dimensions (mm): 197 x 42 x 110
Mastering a craft might take a lifetime. Hours of practice and years of study until the hand and the mind become one: until there is no distance between the imagination and the materials. In Japan, such skilled artisans are called Takumi.
Iwata Eclipse Takumi Side Feed Airbrush, first and foremost, has all of the spray attributes of Iwata Eclipse Series airbrushes. In addition this side feed model has a redesigned, compact body style for improved control and balance. This, combined with a new gravity assisted side feed cup improves paint flow, making Takumi remarkably responsive. The two-piece 0.24 oz/7 ml cup design disassembles for easy cleaning and siphon cut lid helps reduce paint build-up.
Who sprays with Iwata Eclipse Takumi Side Feed Dual Action Airbrush?
- Artisans looking for unparalleled responsiveness and balance
- Those who want an inspired gravity assisted two-piece side feed cup design with siphon cut lid that vastly improves paint flow and minimizes clogging when compared to old-style cups
- Professional Painters and hobbyists spraying fine to wide level of detail
- Those who want the ease of Eclipses compression fit drop in nozzle
- Right or left-handed users
- 0.10 oz / 3 ml cup option sold separately
HO 7in Green Jewels (12/pkg)
JUNECO B-17 - 7inch JEWELS - GREEN - PACKAGE OF 12. HO SCALE - BUT CAN BE USED IN OTHER SCALES - MEASURES 0.080inch
HO EMD FT A+B Set - DC/DCC/Sound - Great Northern (GN As Delivered) #408-C + 408-D
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15246
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Enterprise 2-Bay Covered Hopper - Penn Central PC #881497
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO 1958 Cu Ft 2 Bay Hopper
Frisco #83562
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
Trinity 3230 Covered Hopper - Chicago Freight Car #3108
FEATURES:
All new tooling
Ready to run
Injection molded plastic
Fine scale detail
Separately applied wire grab irons
Separately applied wire cut levers
Etched metal roofwalks
Crisp painting and printing
HO Alco FA-1 & FB-1 Set - DCC & Sound - Canadian Pacific (Block Scheme) #4026, 4415
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20299
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
N Scale 53Ft Containers - HUB Group (DA Markings) Set #1 (3 pkg)
Road Numbers: 634334, 634406, 634608
FEATURES:
Side corrugations with an 8-55-8 arrangement
Front wall with 10 vertical corrugations
Roof with 6-54-6 corrugations
1-3-1 beveled doors
Placard holders on front wall, sides and door
Each set comes as a 3-pack w/different road numbers
Output: 24V AC 1000mA
Powers up to 50 lights and connects to Just Plug Light Hub or Expansion Hub, each sold separately.
HO IC Centralia Steel Wide-vision Caboose - Illinois Central Gulf (IC Orange I-Ball Repaint 1974+) #199414
Product: IC Centralia Steel Wide-vision Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber or Gould Caboose Roller Bearing with separate brake beam part as appropriate for each paint scheme
Wheels: CNC-Machined 33inch Wheels
DC/DCC Lighting Features: interior lighting as well as lighted IC(G) box-style red-green markers
Illinois Central Gulf (ICG) -Orange I-Ball Repaint 1974+- represents a common repaint scheme applied by the now Illinois Central Gulfs Centralia Shops. The GM&O and IC merged in August of 1972, and cabooses were painted with a new version of the logo: The ICs -split rail- was filled in to form the ICGs -solid I.- The ICG didnt bother to mask off the aluminum window frames, so they are now orange with the rest of the carbody. These accurate repaint car numbers are carefully selected from the 1972-built group of cabooses. That means they feature a Pullman -bow-tie- panel roof. But there is more to it that that - along with PS panels, the roof features a completely different construction layout, and Apex walkway than the earlier Stanray-equipped series. The underframe details also match the 1972 Centralia lot, including accurate brake components layout and the classic IC-style battery box. This group of cabooses was built with Microphor chemical toilets, so there is no visible dump pipe on the underframe. Take a minute to enjoy the finer details of this model, including Timken style roller bearings and flexible rubber air hoses. The fully-painted interior is illuminated with LED -warm- lights to replicate incandescent bulbs, and the ends feature accurate, lighted IC(G) box-style red-green markers for the era.
HO Scale G2 SD90MAC Diesel - DCC & Sound - Indiana Railroad #9025
Detailed Information
INRD FEATURES:
Former CEFX units; major spotting featured remain
#9025 features special -warbonnet- 25th Anniversary paint
EOTD above left rear of fuel tank
Indiana Railroad has 15 SD90MACs on long term lease from CIT group. 4 of the 10 units sent to NS from CIT group came from INRD. Currently the fleet wears the attractive red & white scheme applied to most Indiana Railroad units, while #9025 wears a special -25th Anniversary- paint.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Intermodal Yard Pavement - Kit
DIMENSIONS:
Landing Pads: 15 Pieces 8-15/16 x 3-3/16 inches (22.7 x 8cm)
Roadway: 5 Pieces 8-15/16 x 1-15/16 inches (22.7 x 4.9cm)
Crane-way: 5 Pieces 8-15/16 x 1-1/8 inches (22.7 x 2.8cm)
Concrete Grade Crossing (matches 933-4121, also available separately):
Crossing Center: 2 Pieces 9 x 1/2 inches (22.8 x 1.2cm)
Crossing Edges: 4 Pieces 9 x 1/4 inches (2.8 x 0.6cm)
FEATURES:
- Must-have for container and piggyback yards
- Great for modern diesel-era layouts
- Modular design allows easy expansion by combining with additional kits, sold separately
- Realistic drainage detail
- Molded in concrete gray
- Includes Modern Concrete Grade Crossing sections that match 933-4121, sold separately
- Easy-to-build plastic kit
HO Modern Steel Highway Overpass with Concrete Sides - Kit
Product Information
Modernize your HO streets and highways with the Cornerstone Modern Steel Highway Overpass with Concrete Sides kit! Packed with authentic detail and designed for easy construction, the prototypes offer a lighter, cost-effective design thats typically found on high-speed routes handling heavy traffic. Other features include:
Typical of pre-stressed concrete highway overpasses seen all across North America
Fits highway scenes from the 1960s to the present
Round and Square Support Columns included in short and tall styles to clear railroad or highway below
Build as single or double span - easily combine kits (each sold separately) for a larger assembly
Easy to install in new or existing layout scenes
Detailed abutments with molded cut lines for easy customizing
Parts molded in concrete gray
HO 59Ft 4550 Cu. Ft. Cylindrical Covered Hopper - Round Hatch - CNLX, Plain #5052
National Steel Car Co. 59Ft, 4550 Cu. Ft. Cylindrical Covered Hopper - Round Hatch
The car is commonly referred to as the -Canadian grain car-. Between 1972 and 1985 almost 20,000 cars were built for the Canadian government to assist the Canadian railways in transporting vast quantities of grain. Canadian National, Canadian Pacific, and other companies own or lease this type of car.
Round Hatch cars feature 4 round roof hatches, numerous wire details, etched metal roof walks, laser sharp painting and lettering, accurate colors, 100 ton trucks with 36inch metal wheelsets, and metal knuckle couplers.
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
HO 40ft ACF Welded Boxcar w/8ft Youngstown Door - Erie Lackawanna #55876
Create authentic freights for your diesel-era layout with the Walthers Mainline 40ft American Car and Foundry Welded Boxcar with 8ft Door! Introduced in the late 1950s, the wider door opening was popular with shippers and receivers, allowing fast and easy access for forklifts.
Serving into the 1980s, these layout-ready models feature:
-Limited edition - one time run of these road numbers!
-Prototypes in general freight service from late 1950s to 1980s and beyond
-Detailed 10-panel body
-8ft Youngstown doors
-Late Stanray 4/4 improved Dreadnaught ends
-Stanray diagonal panel roof
-Apex see-through steel running boards
-Correct 33in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
Built-&-Ready Landmark Structures - The Depot
Assembled - 6-9/16 x 4 inches (16.7 x 10.2cm)
The Depot is a classic whistle stop depot suitable for any layout. It features clapboard siding, a weathered cedar shake roof, covered outside passenger waiting area and a modeled interior that includes a ticket clerk figure standing before an open ticket window. Scene-setting details include a lamppost, posted train schedule, luggage carts, benches, semaphore, pigeons sitting on the roof, signage, decals and many more.
The Depot also includes one installed warm white interior LED light equipped with a plug compatible with the Just Plug Lighting System. 25mA RoHS Compliant.
HO Value Line RTR - 13 Panel Coalporter - NYC (Conrail Quality) #505616
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52R class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Music to My Ears
4 Musicians w/Instruments, drum set, base fiddle , flute, piano
HO Straight Track Sections - 9 3/4in (246mm) (4/pkg)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes!
Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation.
Suitable for all types of layouts, temporary or permanent, this modular track system features an integrally molded roadbed for realistic appearance.
Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
HO 60Ft Bulkhead Flat - Southern Pacific SP #509322
MODEL FEATURES:
Separately applied end details and brake wheel
33inch machined metal wheels with RP25 contours
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO 40ft 16K Gallon Tank Car - Minnesota Corn Processors/DMIX #190194
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Scale Ford F-100 Pickup Truck - Southern
VEHICLE MODEL FEATURES:
Side view mirrors
Headlight glazing
Interior detail
Under carriage detail
Moveable tailgate hatch
HO Scenic Accents Snowball fight 6pk
HO PTC Antenna for EMD (1/pk)
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AABX #206022
AN OTTER VALLEY EXCLUSIVE!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Greenville 86ft Double Plug Door Box Car - PRR #110052
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: October 2021
Pennsylvania Railroad (PRR) X60B -Delivery 1964- 1965+ Era is our first PRR offering in the Greenville auto parts world and of course PRR purchased a large group of 145 cars prior to the PC merger. Painted in the characteristic PRR freight car red colors with large PRR keystone and gold -Cushioned Load- stenciling, these cars are sure to be crowd pleasers and were seen widely. The PRR prototype car was modified in 1965, with the removal of the roof running board, the lowering of the Miner brake wheel housing and removal of high grab irons and end ladders. If you look closely, you can see all of these -remnants- on the sides and ends of the model. Even the roof on the model features the old bolt locations of the running board supports! 70T Trucks with 33inch wheels and rotating -Timken- roller bearing caps finish off this X60B offering. Our PRR masterpieces are available in six different numbers. PRR/PC/CR fans rejoice, if you model prior to about 1985 you need these!
HO RTR 53Ft Platewall RoadRailer Trailer - Norfolk Southern (Triple Crown) #463526
Norfolk Southern
Triple Crown Medium Logo
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
HO G2.0 SD60M-3 Tri-Clops - DCC & Sound - BNSF #1405
BNSF FEATURES:
Ex-BN, new -wedge- logo paint
Electronic bell
Angled electrical cabinet
Road number specific features
Starting in the mid 2010s, BNSF overhauled a batch of SD60Ms. They were re-wired, rebuilt, repainted, and had remote control equipment installed in most of them. BNSF classifies these as -SD60M-3s-. In this run, we are offering two road units, and one yard service version. 1405 retains it older BN carbody with brake wheel, while 1416 and 8131 has the newer rebuilt body with electronic brake ratchet. All 3 show slightly different versions of the current BNSF scheme.
ROAD NUMBER SPECIFIC FEATURES:
#1405
Small EMD plow
-Skate- style antennas on the cab roof angles
front and rear ditch lights
brake wheel.
#1416
Small EMD plow
strobe light (effect in DCC)
front and rear ditch lights
unique front number board font
remote control decals, new BNSF style electronic brake ratchet.
#8131
No plow
strobe light (effect in DCC)
front ditch lights
-Yard service only- lettering
remote control decals, new BNSF style electronic brake ratchet.
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately ?painted and ?printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Warranty service available
Minimum radius: 18inch Recommended radius 22inch
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
Animated roller bearing caps
SOUND-EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO 4650 Centerflow Hopper - Wisconsin Central (CN) #87044
Features:
Etched metal roof walks
Detailed brake gear
Blackened metal wheels
Accurate painting and printing
100-ton roller-bearing trucks and body mounted AccuMate couplers with screw-attached coupler pockets.
AccuMate couplers are made under license from AccuRail, Inc.
HO RTR 50Ft ACF Exterior Post Boxcar - Railbox #30116
Product Information
Serve shippers on your HO railroad with these WalthersMainline 50Ft ACF Exterior-Post Boxcars. Responding to a growing shortage of serviceable cars, ACF and other builders unveiled a new generation of bigger equipment in the 1970s with increased width and height to improve carrying capacity. Today, theyre still in service for Railbox and many other roads, where they can be found moving all types of cargo. Features of these models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes seen from coast-to-coast 1974 to the present
Handles all types of general freight loading
Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
41Ft 3inch Truck Centers
15Ft 2inch Tall
10Ft 8inch Wide
Fully assembled
Correct 33inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO B-50-15 Boxcar - As Built w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #15691
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
HO - Air Horns (Unpainted Brass Casting) - Leslie S-3L, 3-Chime
N Scale AutoFlood III RD Coal Hopper - CEFX #600568
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO GP40 - Gold DCC & Sound - Penn Central #3144
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
Adjustable Stick-On Weights - 2oz
12 inch Long Round Copper Rod - 3/32 inch Diameter (4 pkg)
Round Copper Rod - package of 4
Diameter: 3/32 inch
Round Hay Bale - 20 pcs.
Bring rural areas to life in minutes with this set of 20 Round Hay Bales! Fully assembled and ready to add to scenes new or old, each features a realistic color and texture. Perfect for detailing fields and farm scenes, they also make great loads for boxcars, and flatbed wagons or trucks.
St Marys #3076
MODEL FEATURES:
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied wire grab irons
Separately applied brake wheel and end ladders
Etched end platforms
Machined metal wheels
Weighted for trouble free operation
33in solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18in
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per road number matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
HO EMD FT A+B Set - DC/Silent - Reading (Black & Green) #258A + 258B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO Steam Generator Exhaust Stack - Plastic (2pk)
Evergreen Scale Models - Opaque White Polystyrene H-Column .080In x 14In (4 pcs pkg)
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504837
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
Drive Mechanism w/Cable & Actuator
Mounting bracket and mechanism utilize the Tortoise(tm) (not included) and a special drive wire cable assembly to remotely actuate any crossing gate, train order or semaphore signal having a vertical control wire extending below the layout. Positive, adjustable stops are provided at both ends of travel. Can drive two cables from the one drive mechanism, if desired. Adjustable for all scales.
Kalmbach Publishing Book -Model Railroaders Guide to Bridgers and Trestles
The Model Railroaders Guide to Bridges & Trestles from Kalmbach is your one-stop source for information on prototype bridges. This book will guide you through the history of the various bridge types from the first days of railroading through today, showing older bridge types still in use, older bridge types that are now obsolete, and new concrete and steel designs. This also book includes the history of various types of bridges, tells about how bridges have evolved in design and size and how bridges fit in with other related scenic elements. It also discusses many bridge types including wood trestles, stone and concrete arches, culverts, wood and steel truss bridges, steel plate-girder bridges and cantilevers. Its loaded with information to help model railroaders choose appropriate bridges for the region, era, and type of railroad they model. Model Railroaders Guide to Bridges & Trestles is one of many Kalmbach model railroading how-to books.
HO GE C30-7 - DCC & Sound - Norfolk Southern #8008
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
HO 36ft Old-Time Wood Boxcar - Cotton Belt #16796
Late - Conrail Grey Med Logo #888841
Late - Conrail Grey Quality Logo #889095
HO Kenworth T680 Day-Cab Tractor with Cryogenic Tank Trailer
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Southern Pacific(TM) Rack / Flatcar #515404
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO FCA 52ft 100-Ton Bulkhead Flatcar - CWLX #200086
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2016 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
60ft ACF Auto Parts SD Box Car Canadian National
MODEL FEATURES:
- 70-ton roller-bearing trucks with blackened metal wheels and adjustable screws
- Authentically painted and lettered detailed body with sliding doors and distinctive “Precision Design” recessed panels
- Prototypically designed roof and ends with full rivet detail
-Detailed die-cast metal underframe for improved operation
-Separate brake system and air reservoir
- Cushion underframe with extended coupler pockets
-Accurate painting and printing
- AccuMate operating knuckle couplers with mounting screws
- Roof overspray
N Scale True-Scale Coupler - Black Long Shank pkg(20)
Product Information
Micro-Trains True-Scale Couplers are specifically designed for accurate scale size, more prototypical features, proper scale-distance between cars and no slinky effect when operating. This easy-to-assemble and install body mount coupler consists of a draft gear box, lid, knuckle, lip shank and a separate plug-in air hose. There are no springs. They are uncoupled manually using a sharp toothpick or a needle and can be joined by simply pushing the cars together. These couplers are to scale so they will not couple with existing larger N scale couplers. For those who have Magne-Matic or other coupler systems, you can use a conversion car with a Magne-Matic installed on one end and a True-Scale coupler on the other.
HO PC&F 5241 CUFT - Boxcar - Boston & Maine - Single Car #3317
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Scale Mast-Arm Traffic Lights - Just Plug Lighting - pkg(4)
Product Information
Woodland Scenics N Scale Just Plug Traffic Lights are ready to place right out of the package and come hand-painted and authentically weathered. The Traffic Lights are pre-wired and made for use with the Just Plug Lighting System. Whether at rural intersections or on busy city streets, they add action to any scene. Check out the entire N Scale Just Plug line of lighting and accessories.
Mast Arm Traffic Lights hang over part of the intersection and are used for intersections located on suburban or small-town roads. They are single-faced and the package includes two red and two green lights, enough for one four-way intersection.
Digitrax PS615 - 90W AC/DC 15VDC 6 Amp Power Supply
PS615 90W AC/DC 15VDC 6 amp power supply for use with all Digitrax Command Stations and Boosters operating at 5 amps.
High-efficiency power supply
15 VDC output
Accepts different cord sets
Meets MEPS VI and DOE VI efficiency standards
CE for EM compatibility and IEC 60950, UL, and FCC safety requirements
Full galvanic isolation of output voltage from AC input
RoHS environmentally sensitive manufacturing
Compact and lightweight
Power indicator light
For Use With - Evolution Starter Set
Over current and overload protected
HO Just Plug Lighted Vehicle - Cool Convertible
Rag-top down and summer in mind, this convertible is ready for a Sunday drive!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
HO FMC 5077 SSD Boxcar - Railbox #17721
MASTER MODEL FEATURES:
- Single or Double Sliding Door where appropriate
- Multiple body styles
- Metal knuckle couplers
- Plate B Box Car
- X-Panel Roof
HO International(R) 4300 Crew Cab Dump Truck - Orange Cab, Silver Dump Bed
40Ft Corrugated Container Ocean Network Express 2pk
TLLU #620498(6) UETU #620540(5)
HO 13,600 Gallon Acid Tank Car - GE Rail Services (NATX) #130011
ETA: July 2023
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Spray Can - Smoke (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 5820 Covered Hopper - Procor/UNPX (Low Black Solid) (6pk)
Includes the following numbers, all individually packaged:
#122392
#122521
#122670
#122674
#122776
#122954
Era: 1990s+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO RTR 68Ft Bulkhead Flatcar - Trailer Train TTPX #82119
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
Factory installed Celcon handrails
Individually applied wire formed grab irons
5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
See-through cab windows
DCC Ready 21-pin NEM plug
LED Illuminated front and rear headlights
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brand of track
Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMDs most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
PROTOTYPE MANUFACTURER: EMD
Axles: 4
LIGHTED: LED Lighting
Minimum Age Recommendation: 14 years
Is Assembly Required: No
40Ft Corrugated Container Ocean Network Express 2pk
TLLU #62052727(8), UETU #620570(0)
RS-18u, DCC & Sound - CP Rail w/Multimark #1820
Era:1980-1998
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
HO Alco RS3-M Chop Nose - DCC & Sound - Delaware & Hudson: Lightening Stripe #505
Photo courtesy Mike Herman Family
Delivery Expected Early 2024
Details:
RS-3 units #4115, #4106, #4107, #4113, #4122, #4112, #4119, and #4128 were rebuilt by Morrison Knudsen into RS-3m units (numbered #501-508, respectively) between December of 1975 and March of 1976. The locomotives were re-engined with the 2,000 horsepower ALCo 12-cylinder 251C engine, and the long hood was raised six inches to accommodate the larger engine. The dynamic brakes were also moved to a box behind the cab.
International 4900 Single-Axle Semi Tractor - Assembled note single truck only
Licensed Replicas of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Positionable Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
This medium-duty truck line was introduced in the late 1980s. Powered by a Navistar DT inline six-cylinder diesel engine capable of up to 350 horsepower, the 4900 series has been a great starting point for a wide range of commercial vehicles, including delivery vans, single- and dual-axle semi tractors, as well as fire apparatus and other government applications
HO 40ft ACF Modernized Welded Boxcar - Lehigh Valley #66186
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Marine Industries Piggyback Flatcar - Canadian Pacific #505668
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
HO 40Ft Boxcar w/ Early Improved Dreadnaught Ends - Great Northern (Chinese Red) #21695
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - SOO Line #136012
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Single Lamp Post Street Light - 3 sets
Use to light street corners, sidewalks, parks and more. 20mA/set RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 0.484 in w x 2.76 in h (12.3 mm w x 70.1 mm h)
Walthers SceneMaster HO Flexible Self-Adhesive Paved Roadway Vintage Highway (White Dashed Centerline, White Solid Edge Markings)
HO Ford LNT 9000 - Old Milwaukee Decal
Track & Rail Cleaner & Conditioner 8oz.
Cleans your track and lays down a non-slippery conductive film that will improve current flow.This will enhance the operation of DCC and Sound Systems. May be used with most track cleaning cars.
There are a number of track cleaning devices out there: Centerline, Trix, Atlas, CMX, and Aztex are some of the cars available. You need to apply Track Cleaner to the cloth rollers or discs on these machines. Run around the track, replace the rollers of cloth with a dry pad or cloth, and run again. This will remove the residue and you should be ready to roll!
Right Hand
Powered solenoid turnout machine
5-1/2in Long, Cut #2 Needle File - Square, Carded File (1pc)
HO GE U25B Low Hood - DCC & Sound - Great Northern: Empire Builder Scheme #2500
The HO scale U25B Locomotive features:
Phase I, II & III units represented in 1st run. (Phase IV & other units will come with future runs)
Single-window style for low nose units. (Double-window in future runs)
Both low- & high-short hood versions
Early high- & later low-style side doors.
Road specific details for each model
Working step lights on low-short hood models
Different roadname-specific exhaust stacks
Roadname-specific battery box doors on engineers side
Roadname-specific air cleaner boxes on rear
Working inspection lights on all units
Lighted control stand inside cab
Different types of fuel & air tanks, as appropriate
HO EMD SD7 - DC/Silent - Southern Pacific (Black Widow) #5331
Southern Pacific
- Steam generator equipment details on short hood
- Correct Mars style -ash can- light on both ends of the locomotive
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO 40Ft Refrigerated Container - CSAV Set #2 (3 pkg)
Road Numbers: CRLU 7253341, CRLU 7253399, CRLU 7253450
(White/Blue/Red)
MASTER MODEL FEATURES:
40-foot High-Cube Refrigerated Container
Composite materials sandwich-sides design
Detailed picture window refrigeration unit with separate parts
ISO Type 45R1
Five hinge / four bar doors with OUT style handles
Each set comes as a 3-pack
HO Ultimate Mobil Gas Station Detail Set
Custom details, sign sheets, and pole sign to complete a Mobil Gas Station Scene.
HO Scale US&S Double Door Cabinet
Our three-inch 1/16in tube, sold separately, fits down inside this larger diameter (5/64in OD, 0.066 ID) non-removable tube inside the cabinet. This makes a nice flange at the top of the cabinet. These cabinets will accommodate any length mast.
HO EMD GP40R - DCC & Sound - Canadian National (Ex-IC) #3117
2012+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO 85Ft General American G85 Flatcar - GTTX (Yellow) #300477
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
50Ft Smooth HC Plug Box - BNSF/Round Logo #712702
Detailed Information
MODEL FEATURES:
Former MDC tooling
Brand new paint schemes
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Separate brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister safely holds model for convenient storage
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of -In Service- equipment; -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per road number matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
1/4 inch OD Square Aluminum Tube - 0.014inch Thick x 12inch Long
Square Aluminum Tube (1 pc)
Outside Diameter: 1/4 inch
Athearn Genesis HO 13,600 Gallon Acid Tank Car, MDCX #1083
Athearn Item #: ATHG25632
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Two different body phases (early and late)
Many separately applied details
Etched metal walkways
Different top platforms as appropriate per prototype
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18in
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry (TM) scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
N Scale 50Ft NACC Box - Delaware & Hudson D&H #28037
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
HO 89ft Thrall Bi-Level Auto Carrier - CN/GTW #504121
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
N Scale NSC 5111 50Ft Plug-Door Boxcar - Quebec Gatineau #75106
MASTER MODEL FEATURES:
Bodies: 5111 or 5277 cubic foot styles
Ends: Nine or ten corrugations
Painted safety rails
Doors: 9ft or 10ft plug doors
Side Sills: Deep or shallow sills
Trucks: 70- or 100-ton
HO 40ft ACF Modernized Welded Boxcar - Green Bay & Western #623
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - DEAX #11333
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 50Ft FMC 5077 Double Door Box - Southern Pacific SP #246045
MODEL FEATURES:
Separately applied grab irons, end ladders and brake wheel
Photo-etched cross-over platform
33inch machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
Testors - Spray Enamel - Gloss Red
Testors 3 oz Aerosols come in over 50 popular colors and 9 different finishes. They offer superior adhesion to a variety of surfaces including wood, metal, glass, terra cotta, ceramic bisque and more. They are fast drying and easy-to-apply which means quick project completion.
HO GMD SD40-2W - DC/DCC Ready - CN (Non Dynamic Sergeant Stripes) #5357
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20128
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
53Ft High Cube Container - CP - Gray(2-pack 731775 and 731788)
2020 Release
Detail Variations:
All-new numbers
CPPU 731775
CPPU 731788
The Rapido Trains HO Scale 53ft container is a beauty way to go. The insulated dry boxes are ubiquitous to intermodal trains across Canada and the United States. While a good portion of these containers can be found on domestic trains across Canada, they are also seen throughout the US Midwest and as far south as New Orleans.
The containers will also come with an optional heater box and fuel tank, correctly decorated and installed as appropriate for each paint scheme. All containers come assembled with an easily-removable floor so that additional weight can be added as-desired by the end customer.
Available in a wide range of paint schemes including both railway-owned containers as well as those owned by various transportation and shipping companies.
Atlas 823 - HO Code 100 - Nickel Silver Rail - 3in Straight Section (4pcs)
Athearn Roundhouse 78050 HO Dash 9-44CW DCC Ready UP/Nose Shield
No9728
MODEL FEATURES:
Non-illuminated ditch lights
Three cab variations
See-through cab windows
Factory applied sunshades, frame-mounted bell, exhaust stack, brake wheel, rear sand filler, air tanks
Separately-applied wire grab irons
Fine scale handrails
Steerable or Hi-ad trucks with separate shock struts and brake cylinders per prototype
5,000 gallon fuel tank
McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run out of the box
Painted and printed for realistic decoration
Highly detailed, injection molded body
Quick Plug and play technology: DCC ready with both 8 and 9 pin connectors
Bi-directional constant lighting so headlight brightness remains consistent
Incandescent bulbs for realistic color and appearance
All-wheel drive with precision gears for smooth and quiet operation
Heavy die-cast frame for greater traction and more pulling power
All-wheel electrical pickup provides reliable current flow
5-pole skew wound motor with precision-machined flywheels and dual-link drive train for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Packaging interior safely holds the model for convenient storage
Minimum radius: 18inch
Recommended radius: 22inch
HO EMD GP7 - DC/DCC Ready - Amtrak (Orange) #777
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
AMTK FEATURES:
NEW! Non-Dynamic with roof access hatches
1700-gallon fuel tank
Partial skirting above fuel tank
Front and rear flashing emergency beacon (in DCC mode only)
Flashing xenon strobes (in DCC mode only)
Wheel bearings per prototype
In the late 1970s Amtrak acquired a fleet of second-hand GP7s which were painted in a bright orange color for use in maintenance-of-way service (MOW). These highly visible units were quickly and unofficially named -Pumpkins- by the railfan community. They were frequently spotted hauling Amtrak ballast cars, flat cars equipped with special racks to carry rail, or gondolas that were used to gather scrap steel and wooden ties that accumulated on the right-of-way. Aside from MOW use, these units were used to couple Amtrak express Roadrailers to soon-to- arrive passenger trains. Pumpkins could also be found in service on non-Amtrak rails. For example, Amtrak -Pumpkins- were involved in the rebuilding of the Doylestown branch for the Southeastern Pennsylvania Transit Authority (SEPTA), and the Atlantic City line for New Jersey Transit. This bright paint scheme with unique details such as cab mounted strobes and end mounted emergency beacons will surely be an -attention grabber- on your layout.
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO RTR Ford C Telesqurt - White
Key Features
Ford licensed model
Factory assembled with all detail parts applied
Medium wheelbase chassis with conventional cab
Fully extending Telesqurt arm with fire monitor and photo-etched ladders
Molded cab interior with seperately applied steering wheel
Clear molded windows
Vinyl tires
Detailed Information
Overview:
The Ford C Telesqurt is the latest addition to Athearns Ready To Roll line of fire vehicles. Designed to bring the maximum amount of fire suppression right where it is needed, the Telesqurts telescoping boom raises to place the fire monitor in the thick of the action. This exacting replica is sure to fit right in to any HO fire department.
MODEL FEATURES:
Ford licensed model
Fully extending Telesqurt arm with fire monitor and photo-etched ladders
Clear molded windows
These models are unnumbered and unlettered
Medium wheelbase chassis with conventional cab
Molded cab interior with seperately applied steering wheel
Vinyl tires
Herzog #3914
FEATURES:
- Prototypically accurate dimensions
- Accurate paint schemes
- 100 Ton roller bearing, truck mounted couplers
HO Mainline Detail Set - Relay & Phone Boxes (16)
(Unfinished metal castings)
Zephyr Express: All-in-one Command Station/Booster/Throttle - Starter Set
Zephyr Express gives you simple to use Digitrax Complete Train Control for a great price. It offers simplified advanced train operation for any size layout and is fully expandable. You will not have to start over when you want to do more with your railroad!
Zephyr Express Set Includes:
- DCS52 All-In-One Throttle/Command Station/Booster to run your layout
- PS314 Power supply to provide power to run your DCS52
- One LT1 LocoNet Cable & Decoder Test Kit
- Zephyr Express Quickstart Guide
- Zephyr Express Manual
- Digitrax Decoder Manual
Zephyr Express Offers:
- Cost effective entry level LocoNet Compatible system
- Color 2.4 inch LCD Screen.
- Large Backlit Keypad.
- Speed control knob and direction switch with brake.
- Integrated USB Computer Interface
- Easy 2 and 4 digit addressing.
- Smooth speed control.
Run multiple trains at once without blocking!
- Run up to 20 addresses at the same time on your system.
- Run up to 20 throttles at the same time on your system.
Jump Ports for using DC power packs as additional throttles:
- Use one or two smooth DC power packs as throttles to control DCC equipped locomotives.
- Simple, cost effective way to add more throttles to your Zephyr Express set.
- Makes it easy to share the fun of DCC with layout visitors and young operators.
- Functions on locos controlled by Jump throttles remain active.
Over 9000 Locomotive Addresses:
- Use Address 00 to run one or more locos without DCC decoders
- Two Digit Addressing is easy to use. (Address 01-127)
- Four Digit Addressing-use the number painted on your engines as its address.
3.0 Amps of Power to run multiple trains:
- Booster outputs 13V DC for safe operation in N and HO scales.
Function Control:
- Control lights and sound with 29 functions (F0-F28)
- Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
- Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder).
Stationary Decoders, Turnout Control & Turnout Position Reporting:
- Access to stationary decoder control for turnouts and other devices.
- Control 2000+ stationary decoder addresses.
Consisting:
- Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos.
- Advanced consisting, allows only advanced consist capable mobile decoders.
- Basic consisting, program decoders to run on same address.
Decoder Programming:
- Built in read/write programmer that can read and write all CVs.
- Supports Direct programming (Digitrax preferred method). Also supports paged & register mode programming.
- Operations mode programming can be used to program decoders on the layout.
Expandability with Digitrax LocoNet:
- Use Zephyr Express as a starting point for your Digitrax LocoNet System, then add components.
- Use Zephyr Express as an expansion set with Digitrax equipment you already have installed.
- Add Radio or IR via LocoNet. Just plug-in a UR90, or UR92 receiver and add IR and/or Radio throttles.
HO Portec 3000 Covered Hopper - WINCHESTER & WESTERN #1017
Features:
- Ready to run
- Injection molded plastic
- Fine scale detail with many separately applied parts
- 2 Body and roofwalk variations to accurately match the prototype
- 2 styles of vibrator brackets
- Highly detailed end cages and brake gear
- 100 Ton Trucks
- Metal Couplers
- Etched metal roofwalks and end platforms
- Crisp painting and printing
HO FMC 5077 SSD Boxcar - WRWK/GATX #1405
MASTER MODEL FEATURES:
- Single or Double Sliding Door where appropriate
- Multiple body styles
- Metal knuckle couplers
- Plate B Box Car
- X-Panel Roof
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Late Script Logo) #286363
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
HO SW1000 Switcher - DCC & Sound - BNSF #3609
ETA: June 2023
Detailed Information
BNSF FEATURES:
Roof mounted beacon (Flash function in DCC only)
Fire cracker antenna
MU hoses
Winterization cab window
In the late 1960s CB&Q purchased a small group of EMDs new SW1000 switching locomotive that were incorporated into the new Burlington Northern roster after the 1970 merger. BN then purchased their own SW1000s shortly thereafter. In 1996 that fleet was then absorbed into the BNSF roster while retaining the BN green and white paint scheme. That BN heritage is clearly demonstrated in this Primed For Grime release. Many of the SW1000s retained their green paint up until retirement from the BNSF roster.
SW1000 LOCOMOTIVE NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SW1000 LOCOMOTIVE STANDARD FEATURES:
Lit ground lights
Detailed cab interior
Drop steps unless noted
MU stands
Exhaust stack
Printed numberboards
Fine scale handrails
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Cube Speaker for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Excellent low-speed operation
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OAKX #37
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
N Scale J. Franks Grocery - Built & Ready Landmark Structures - Assembled
Product Information
Modeled after the independently owned grocery stores that began sprouting up in the early 1900s and that can still be seen today in cities and small towns throughout America. Details and accessories include loading dock with dolly, large display windows, awnings, kiddie ride and more. The building features window treatments and you can add lighting to accentuate the included printed interior.
HO Consumer Product Signs - 1940-50s (42)
Consumer Product Signs 1940s-50s. Contains 42 full color posters and signs. HO Scale. Unique weathering and application instructions included in all poster/sign packs.
HO 72Ft Centerbeam Flatcar w/Standard Beam - Duluth, Winnipeg & Pacific #626675
Product Information
Shipping lumber by train is easy for your HO railroad with a fleet of WaltherMainline 72Ft Centerbeam Flatcars on the job! Designed to speed loading and unloading, these bigger cars entered service in the 1980s and quickly became a favorite with shippers and customers. These nicely detailed models are based on earlier cars built with oval cut-outs (popularly known as -opera windows-) on the centerbeam to reduce overall weight, which are still in service with a wide range of railroads and lumber producers. Other features include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1980s to the present
Heavy die-cast metal underframe for excellent tracking
Correct 36inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Model loaded cars in minutes with SceneMaster Wrapped Lumber Loads (#949-3121-series, each sold separately)
HO Ultimate Soda Jerk Detail Set - Decorated
Power Pro Cab06r
Wireless intermediate cab with LED display, encoder speed and internal antenna.
GATC 20,000-Gallon GS Tank - GATX/Cargill #45977
MODEL FEATURES:
- Fully-assembled and ready to run out of the box
- All models are representative of prototypical paint schemes
- Weighted for trouble-free operation
- Body mounted McHenry operating scale knuckle couplers
- 70 or 100-ton Roller Bearing trucks with animated spinning bearing caps per prototype
- 33 inch (70-ton) or 36 inch (100-ton) machined metal wheels with RP25 contours operate on all popular brands of track
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- 3-Packs feature unique numbers not available separately!
- Highly-detailed, injection-molded body
- Separately applied brake wheel and ladders
- Painted and printed for realistic decoration
- Replacement parts available
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Perfect starting point for adding grime and rust
- Faded base colors matched to the prototype
HO Custom Air Compressors (2pk)
Pre-painted and labeled upright air compressors.
HO GP9 DCC Ready - Toronto, Hamilton, & Buffalo #401
ERA: Early 1960-1970s
THB FEATURES:
-Steam Generator Intake & Exhaust
-Long hood nose mounted bell
-Separate ACI plates included
-Roof mounted air tanks
TH&Bs 3 steam generator equipped GP9s began service in 1954 and effectively vanquished steam on this small Canadian railroad. Their time in passenger service was relatively short and they served out their time in freight service all the way into the CP Rail era.
LOCOMOTIVE FEATURES:
-Trainline and MU hoses
-Coupler cut levers
-Drop steps unless noted
-MU stands
-Nub style walkway tread
-Bell placement & type per prototype
-Fine-scale handrails for scale appearance
-Wire grab irons
-Lift rings
-Windshield wipers
-See-through cab windows and full cab interior
-Etched metal radiator intake grilles and fan grilles
-Air tanks mounted below sill unless noted
-Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
-Blomberg-B trucks with appropriate bearing caps
-Sander lines
-Speed recorder unless noted
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately-painted and printed paint schemes
-Body-mounted McHenry operating scale knuckle couplers
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
-All-wheel drive with precision gears for smooth and quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-Bidirectional constant LED lighting so headlight brightness remains constant
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds the model for safe storage
-Replacement parts available
-Minimum radius: 18in
SOUND EQUPPED MODELS ALSO FEATURE
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
HO Arched Pratt Truss Railroad Bridge - Single Track - Kit
Dimensions:
23 x 3-1/16 x 5-1/4in
(58.4 x 7.8 x 13.3cm)
This Walthers Cornerstone HO Scale Single-Track Arched Pratt Truss Railroad Bridge kit is based on standard-design single-track steel bridges constructed to handle heavier trains on railroads from coast to coast. It is part of the Cornerstone Engineered Bridge System and is designed to be compatible with system abutments and bridge piers. This detailed model matches NMRA overhead clearances and will clear tall cars such as double-stack container cars and tall auto racks. It is ideal for use with the Walthers Code 83 Bridge Track 948-886 or other trackage of your choice. Single-Track Arched Pratt Truss Railroad Bridge kit parts come molded in dark gray plastic and feature simulated steel construction.
-Part of the Cornerstone HO Scale Engineered Bridge System.
-Standard design built to handle heavier trains by many railroads
-Fits steam, diesel and modern eras
-Used where extra clearance is needed below
-Matches NMRA overhead clearance; clears double-stacks and similar tall cars
-Easily added to new or existing scenery
-Simulated steel construction with detailed girders, lattice work & rivets
-Use with Walthers Code 83 Bridge Track (948-886 sold separately) plus flexible, sectional and hand-laid track or your own rail
-Molded in dark gray plastic
Rust Streaks Enamel Paint - 35ml Bottle
Rusty Wash Effect
Enamel type streaking for modelling.
Rust and corrosion streaks and stains are easily produced using this reddish-brown color.
Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look
Acrylic Glossy Colors - Gold Leaf - 3/4oz (23mL) Bottle
X-12
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
N Scale 60ft Coach Car - Wabash #1404
FEATURES:
- Based upon C&NW and CNJ prototypes
- Full scale dimensions and details
- All cars include separately applied window glazing, diaphragms and roof vents
- Observation car includes separately applied end railing details and a drumhead
- Detailed interiors (excluding baggage car)
- AccuMate operating knuckle couplers
HO Scale 30Ft Transformer Bank Kit
This is a life-like, -look like the real deal- little kit that includes everything you see in the picture, including the wires. The pole comes pre-painted and weathered to look like the real deal. Kit includes one pole, two cross arms, three transformer boxes, three drop-down fuses, one control box, two copper wires, and one longer brass wire (that can be painted) that connects the transformers to the control box. This kit works well with any of our other power pole kits and components. The transformers pictured are our medium sized transformers.
A word about our Power Pole Kits: A 30 Ft. HO Scaled pole would be 4.1 inches in height. A 40 Ft. pole would be 5.5 inches. These poles are sharpened on the base and are slightly taller than these dimensions to allow for pole insertion into your scenery.
HO Union Pacific Flyer - Train Set
Assembly and breakdown of trains in the railway yard is tough work, but this 0-6-0 steam switcher is ready to get the job done. Assemble your consist, clear the yard and move your freight to its final destination with the Pacific Flyer! Assembly and breakdown of trains in the railway yard is tough work, but this 0-6-0 steam switcher is ready to get the job done. Assemble your consist, clear the yard and move your freight to its final destination with the Pacific Flyer! Watch the video below to see the set in action!
https://www.youtube.com/watch?v=VKMACxKMGUU
This ready-to-run train set includes:
- 0-6-0 steam locomotive and tender with operating headlight
- gondola
- box car
- offset cupola caboose
- body-mounted E-Z Mate couplers
- 36 inch circle of snap-fit E-Z Track, including 11 pieces of curved track, and 1 curved plug-in terminal rerailer
power pack and speed control
- illustrated instruction manual
HO EMD SW9 - DC/ Silent - Union Pacific (UP As Delivered Slogan) #1826
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Union Pacific:
Features the as-delivered slogans -DEPENDABLE TRANSPORTATION- on the right hand side of the cab, and -SERVES ALL THE WEST- on the left hand side of the cab.
Delivered in 1953
Optional -beehive- style spark arrestors with short stacks in polybag
Carbody style handrails
Extra tall -safety end rails- on the cab end
Reflectolite flashing warning light
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
Norfolk Southern NS Honor Our Veterans #6920 - LED Lights
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
NS built 4000 gallon fuel tank
Roof mounted sinclair antennas
NS designed snow plow
Different cab panel louver arrangement per prototype
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
LED lighting including:
Headlights
Illuminated deck mounted ditchlights front and rear
Numberboards
Ground lights above front trucks
Long hood mounted Nathan 5-chime air horn
Sunshades
Rounded or rectangular cab windows per prototype
Flexible rubber multiple unit (MU) hoses with silver glad hands
Flexible rubber front and rear trainline air hose with silver glad hands
Step wells feature seperately applied individual see through photo-etch steps
Coupler cut levers with loops
Anticlimbers
Safety tread on the walkways
Anti-glare panel painted on the nose
Factory applied photo-etch windshield wipers & lift rings
See through and tinted cab windows
Detailed and painted cab interior with control stand, display screens, detailed crew seats
See-through radiator fans
Factory installed wire grab irons
Fine-scale handrails for scale appearance
Underframe mounted E-bell
HT-C trucks with Timken bearings
McHenry scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18 inch
Recommended radius: 22 inch
HO 50ft PS 5277 Cu.Ft. Exterior Post Boxcar - GTW #309362
FEATURES:
- Laser Sharp Painting and Printing
- 33 inch InterMountain Precision Metal Wheelsets
- Kadee #178 Metal Knuckle Couplers
Date: BLT 9-74
Minimum Radius - 22 inches
HO 73Ft Center Partition Car - Canadian Pacific (SOO) #600373
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
Enamel Paint - Panel Line Accent Color - Gray (40mL)
Tamiya Panel Line enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml)
Examples of use:
Black is a general-purpose color and can be used for any type of model. Brown is great for military models as well as highlighting details on bright colors such as Yellow or Orange. Gray is perfect for White or Light Gray parts where Black may be too distinct.
Note:
Plastic parts may become brittle when using Tamiya Panel Line accent colors. Avoid using on movable parts and take care when applying to load-bearing areas. Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying it onto the model. Take care when applying on flat base coat colors as Accent Color paints may permeate more readily.
HO 16,000-Gallon Clay Slurry Tank - SHPX (3pk) #2
MODEL FEATURES:
- Separately applied fittings nozzle, manway, and small safety valve nozzle
- See-through Photo-etched metal walkways and end platforms
- Full brake plumbing and rigging including brake wheel, air reservoir cylinder, triple valve, brake linkage, trainline, brake rod, large brake
- Printed marking on the sides, ends, and top of the tank body
- Fine scale side ladders
- Placard holders
- Printed marking on the sides, ends, and top of the tank body
- Equipped with McHenry AAR upper/lower shelf couplers
- 36 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Multi-packs feature unique road numbers
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Kaolin, a fine white clay, is produced by the natural chemical weathering of aluminum silicate minerals such as feldspar. Mined in the southeast United States (primarily Georgia and Florida), kaolin is used in the manufacture of ceramics, bricks, light bulbs, cosmetics, medicines and food additives. The largest use is in the manufacturing of paper, especially in creating glossy paper. Kaolin is shipped both as a dry powder in covered hoppers and in tank cars with water as a slurry. In the slurry form the weight of water requires the tank cars be smaller capacity compared to other liquids such as ethanol and LPG. Identical tank cars are also used to haul calcium carbonate slurry, used in the making of lime and cement.
One of the more modern versions of the 16K Gallon Tank car is designed and manufactured by UTLX Manufacturing Inc (formerly Union Tank Car). The car is a 286K (referring to a 286,000 pound gross rail load limit) design with a capacity of approximately 16,000 gallons. The capacity varies slightly between UTLX and Englehard, the operators of the cars. The car is an AAR Plate C clearance car with a 111-inch I.D. tank and an overall length of 44 feet. For a complete bottom unloading the car incorporates a Funnel-Flow design. The cars are lined and kept in dedicated service to avoid cross-contamination.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CMBX #1614
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Peco HO Code 83 SL E 8382 Streamline #8 Electrofrog Turnout - Nickel Silver Left Hand
Brown Ties - New North American-Style Turnouts from Peco
These new HO Scale Code 83 turnouts from Peco add more track options for modelers who use Code 83 track. Based on American Railroad Engineering Association drawings, these turnouts have been designed to meet NMRA standards. Peco Code 83 track features ties molded in creosote-colored flexible plastic that mimics the look of the prototype, plus wood grain, tie plate and appropriate spike details. All track and turnouts feature the correct prototypical tie spacing and all are DCC friendly.
Electrofrog turnouts and crossings feature powered (conductive) frogs for enhanced locomotive electrical pickup and may require special wiring/rail gapping in certain track configurations. Instructions are included with each turnout.
Shipped from Ontario Canada
HO EMD GP40R - DCC & Sound - Illinois Central #3121
Mid 90s
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO Scale 1980-1985 Chevrolet Impala Sedan - Assembled - Police (Black/White)
The Rapido Chevrolet Caprice and Impala cars feature:
Both Wagon or Sedan carbodies
1980s body style designed from photos and drawings
Multiple front grille designs covering the entire 1980s
Real rubber tires (and white walls too, where appropriate)
Multiple rim designs (wire spoke, dog dish and more)
Realistic chrome finish on bumpers, rims and more!
Plastruct 90365 ABS 1.25 x 24 Plastic Strip Stock (5pcs pkg)
HO 5820 Covered Hopper - Procor/UNPX (No Procor Logo) (6pk)
Includes the following numbers, all individually packaged:
#123400
#123519
#123521
#123566
#123590
#123596
Era: 1988+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO FMC 5503 Double Door Boxcar - St. Maries River Road #52027
Features:
Double Sliding Doors
Wire grabs
Etched parts
Plate C Box Car
X-Panel Roof
HO 85ft Pullman Standard 36-Seat Diner - BNSF (Fred Harvey) #11
FEATURES:
- Real metal finish simulates stainless steel
- Correct GSC 41-NDO Outside Swing Hanger trucks as used in the 1960s
- Factory-installed grab irons
- Prototypically accurate window tinting
- Window gasket details as appropriate
- Sprung operating diaphragms
- Modeler-installed extended drawbars for 22 inch radius curves included
- Turned metal RP-25 wheelsets and correct trucks with built-in electrical contacts
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24 inch radius is recommended for operation.
HO RTR 68Ft Railgon Gondola - BNSF #518507
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO 85ft General American G85 Flatcar - Union Pacific #53025
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
HO RTR ACF 4650 3-Bay Hopper - Penn Central #886729
Date: NEW 11-65
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO 50ft Waffle HC Plug Door Boxcar - IC #581109
MODEL FEATURES:
- Separate brake wheel
- Body-mounted McHenry operating scale knuckle couplers
- Machined wheels with RP25 contours
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
HO SD70M - DCC & Sound - PRLX ex CSX #4695
Detailed Information
CSX & PRLX FEATURES:
CSX units are former EMD demonstrators. In a roster increasingly dominated by GE, a group of these venerable units have been sold to Progress rail, returning the units to lease service once again.
Early Cab with nose window
Customer-installed GPS dome included in box
K5LA horn
Spare knuckles on rear pilot
Appropriately-colored MU cables
Early 5000 gallon fuel tank
Large or small snowplow per prototype
Illuminated front ditch lights; flash when horn is activated on DCC and Sound Version
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO NSC 60ft Ingot Flat Car - HPJX National Steel Car
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
RibbonRail 5inch Track Alignment Gauges - 28inch Curved HO Gauge
Slide between rails to correctly gauge rails. Helps in laying, spiking and joining rail. Precision machined to NMRA standards. Works in all code size track. Total Length 5inch.
Shipped from Ontario Canada.
HO Bi-Level Auto Rack - Transportación Ferroviaria Mexicana (TFM)/TTGX Flat Car #987753
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO Row House - Kit
Product Information
Walthers Cornerstone Row Houses are perfect for adding big city realism to your layout. Each kit includes a pair of brick side-by-side homes with a raised concrete basement foundation with windows. In many locales row houses line the streets near large factories such as steel mills and can also be found in entire neighborhoods in urban settings. Full blocks of identical homes are easy to model by combining several kits side by side. If you have densely populated neighborhoods on your steam or diesel-era layout use the Row Houses to add realism to your layout along with other Cornerstone HO Scale housing.
Classic home for big city neighborhoods
Found in the heart of many North American cities for over 100 years
Easily combined to build a typical block or entire neighborhood of homes
Printed window treatments
Separate doors, windows, steps and downspouts
Molded in three colors and clear plastic
As shown the Row Houses kit measures: 7-13/16 x 4-9/32 x 4inch (19.8 x 10.8 x 10.1cm)
DT602 - Advanced Super Throttle
The DT602 Advanced super throttle gives you direct control of two locos at a time with all the powerful features and flexibility serious model railroaders demand.
Available in standard tethered or Radio Duplex. The DT602 is designed to handle nearly every aspect of layout control.
With the DT602 you can run trains, create consists, set up routes, control up to 29 functions including sounds and so much more. With the soft On/Off switch and advanced power saving modes you can now operate longer than ever.
All DT602s are factory equipped with Infrared capability. Just add a UR90 and you can use infrared for wireless operation. DT602Ds are equipped with Duplex Radio, using existing UR92s for operation.
Features:
-Works with compatible LocoNet systems
-Color 2.4in LCD Display Screen
-Advanced menu system and displays
-Built-in scrolling help and prompting
-Soft ON/OFF switch, with zero OFF power-drain
-Advanced display Power Saving for longer wireless battery operation
-No more 9V batteries to remove! Throttles are now powered in wireless modes by 3 AA cells!
-Can use recharged AA batteries
-Available in standard tethered or Radio Duplex
-Duplex Scan for available Networks and radio signal strength. Run without cords!
-All throttles come with a LocoNet cord that can be unplugged, and is replaceable
-Dual throttle controls let you control two locos simultaneously
-Run locomotives with encoder click knobs for both speed and direction control
-Full numeric keypad makes loco selection simple
-Control light and sound effects functions with the press of a button
-Control 29 functions (F0-F28).
-Function active/inactive indicators
-Convenient step-by-step throttle option set up
-Supports simplified decoder programming
-Simplified 2 or 4 digit addressing setup
-Over 9,000 locomotive decoder addresses
-Supports turnout and stationary decoder control
-Over 2000 turnout decoder addresses
-Fast clock display
-Recall feature
-Advanced Route editor
HO SD70ACe - DCC & Sound - Union Pacific/D&RGW #1989
Overview
UP HERITAGE FEATURES:
Unique heritage paint schemes introduced in 2006
Detailed to represent the units as the look currently
PTC antenna roofs
Animated rotating roller bearing caps
Re-tooled plows with grab irons
Union Pacific unveiled 6 SD70ACe locomotives with unique -Heritage- paint schemes in 2005 and 2006 to commemorate roads which they had absorbed or merged. These roads are the MP, WP, MKT, SP, DRGW, and CNW. The locomotives are numbered after the years which the mergers took place, or, in the case of the DRGW unit, the year that Rio Grande Industries acquired the assets of Southern Pacific.
SD70ACE SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Belt Conveyor Kit
Extend the reach of your new rock crusher. These parts match the conveyors included in #933-3062, so you can customize your installation to fit your layout.
HO FGE 57Ft Mechanical Reefer - DCC & Sound - BNSF #795010
Detailed Information
57Ft MECHANICAL REEFER FEATURES:
Available with onboard SoundTraxx sound
Scaled from prototype manufacturers drawings and field measurements
Repaints often vary by road number in the size and style of the reporting marks, car numbers and patch shapes
See-through protective screens on the genset end
Detroit Diesel 2-71 Genset visible inside
End wall corrugation visible inside
Inner refrigerator bulkhead
See through end platforms
Two different exhaust stack types: straight pipe with -flapper- or T-shaped -smokejack- per prototype and era
Full underframe detail including Keystone cushioning, air brake reservoir, control valve, brake cylinder, brake plumbing, and fuel tank
Factory applied end ladders and door closure rods
Trainline hoses with silver ends
Three different coupler cut lever styles per prototype
Body-mounted or truck-mounted brakes per prototype
McHenry operating scale knuckle couplers
100-ton roller bearing trucks with rotating bearing caps
Fully-assembled and ready-to-run
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Machined metal wheels with RP25 contours
Weighted for trouble-free operation
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Sound recorded from actual genset
Sound randomly cycles on and off
Utilizes minimum track power
Raise and lower the volume by adjusting the potentiometer
HO EMD FT A+B Set - DC/Silent - Milwaukee (1948 Repaints) #35D + 35C
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO Bi-Level Commuter Coach-Cab Car Set - Metra (3 pkg) #2
(Nippon Sharyo Type)
Road Numbers:
#6064 Coach, #6093 Coach, #8584 Cab Car
Features:
Designed from prototype drawings with the cooperation of Metra
Illuminated directional LED headlight, ditchlights, and red marker lights
Interior includes seat details and LED illumination
21-pin plug for optional DCC operation
Provision for mounting a speaker
Separately applied air horn, antenna, lift lugs, and diaphragms
Free-rolling metal wheels
Equipped with metal couplers
Recommend 22Inch minimum radius
HO NSC Ballast Hopper - Canadian National (Branchline) #90040
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20252
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
GP38-2 EMD - DCC/Sound - EJ&E #700
Detailed Information
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; were excited to include new features often requested, to the GP38-2 and upcoming Genesis models.
EJE FEATURES:
Phase I with narrow spaced radiator fans and chicken wire radiator grilles
Standard range dynamic brake
Xenon strobe, effect with DCC+Sound version
Firecracker antennas
-Mushroom- vent on cab roof
Long hood mounted 3-chime air horn on bracket
Underframe mounted bell
Detailed 2600 gallon fuel tank with vertical sight glass
Blomberg-B trucks with leaf springs and Hyatt bearings
All-weather windows on both sides of cab
Post-delivery -in-service- appearance with handrail verticals and step edges painted safety yellow.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
road number as listed - photo may show a different one
Brass Strip - 12inch x 1/4inch x .032inch
Length: 12inch
Width: 1/4inch
Thickness:0.032inch
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
HO Sunbathers in Active Poses (6 pkg)
Details Badende
The -Bathers- figure set contains a group of 6 bathers in various different poses.
HO Dash 8-40CM - DCC Ready - BCR: Faded Red/White/Blue #4620 - OVR Exclusive
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
HO RTR 50Ft ACF Exterior Post Boxcar - CSX Transportation #129766
Product Information
Serve shippers on your HO railroad with these WalthersMainline 50Ft ACF Exterior-Post Boxcars. Responding to a growing shortage of serviceable cars, ACF and other builders unveiled a new generation of bigger equipment in the 1970s with increased width and height to improve carrying capacity. Today, theyre still in service for Railbox and many other roads, where they can be found moving all types of cargo. Features of these models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes seen from coast-to-coast 1974 to the present
Handles all types of general freight loading
Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
41Ft 3inch Truck Centers
15Ft 2inch Tall
10Ft 8inch Wide
Fully assembled
Correct 33inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO PC&F 5241 CUFT - Boxcar - St. Lawrence & Atlantic (SLR) - Single Car #168
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Early - Staley #35037
HO 50ft FMC Combo Door Boxcar - Missouri Pacific #367263
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Weighted for optimum performance
- Minimum radius: 18 inches
- Body-mounted, McHenry operating scale knuckle couplers
- Fully assembled and ready for your layout
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
Juneco Scale Models Canadian National Wheel Stops - fits over rails (4/pkg)
HO International 4300 Utility Truck w/Bucket Lift - Assembled - White
Colorful railroad logo decals sized to fit for quick conversion to maintenance-of-way service including BNSF, CN, ATSF, BN, CP Rail, CNW(TM), NS, Chessie, DRGW(TM), MILW, KCS, CR, CSX, SOU, SP(TM) & UP(R)
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Position-able Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
Introduced in 2002 to replace the 4000-series trucks of the 1990s, the medium-duty 4300 was built in three variations and became a very popular chassis for a variety of commercial applications. Today, they are still in production as the International Durastar.
HO High Cube DD Plug Box - BCOL #100438
MODEL FEATURES:
Separately applied brake wheel
Underbody with brake system details
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
Chicago & North Western(TM) #11967 (yellow, green; Employee Owned Logo) - Ready to Run
Now you can add one of the most versatile machines every built to your maintenance-of-way fleet with the WalthersProto Jordan Spreader! Used to profile and grade drainage ditches during warmer weather, when the flakes start flying, Jordans can be found plowing snow and pushing it back from the tracks. These HO replicas are based on the model 2-200 Spreader-Ditcher-Snowplow used by dozens of railroads, which have been in service year round since the 1920s. Featuring all-new tooling, the models are a perfect companion to the WalthersProto Russell Snowplows (sold separately) and feature:
Limited edition - one-time run of these numbers
Factory-installed grab irons
Positionable wings and moldboards can be raised and lowered
Built tough with durable metal hinges and other details
Complete underbody with brake gear and piping
Thin profile stirrups
Cab window glass
Railroad-specific details
Horizontal or vertical air reservoir
Original or one of 3 later headlight styles as appropriate
70-ton roller bearing or Bettendorf trucks as appropriate
Single-chime air horn placement
Ultra-smooth rolling metal axles and 33in wheelsets
Proto MAX(TM) metal knuckle couplers
HO ALCO RS-3 - DCC & Sound - Greenbay & Western #308
Details:
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound Select decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
Photo: Kewaunee, WI 6-20-64 Stanely R McCarthey (Eddie Gross Collection)
Details:
- Red & Grey
- marker lights
- horn on cab
- bell
- MU receptacles
#1715 Stainless Steel Screw Assortment 4 of each
Help avoid down time and work stoppage by making sure the proper mounting hardware is available at all times. Each screw assortment contains 8 of the most popular screw sizes (4 each) for most of your coupler mounting needs.
4 Each
0-48 x 1/8inch Metal
0-48 x 3/16inch Metal
0-48 x 1/4inch Metal
0-48 x 3/8inch Metal
0-80 x 1/8inch Stainless Steel
0-80 x 1/4inch Stainless Steel
0-80 x 3/8inch Stainless Steel
0-80 x 1/2inch Stainless Steel
HO 60ft Flat Car - OTTX/Red Logo #92008
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO Union X-3 Tankcar - Atlantic Refining #32642
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
Tortoise Edge Card Connector - 2020 Update w/Wider Connection (1/pkg)
This Tortoise Edge Card Connector fits the Tortoise Switch Machine. Designed for a snug fit without shims, the edge connector provides locations for the solderless connection of wires for control of electrical devices connected to the Tortoise turnout motor.
HO ACF 4600 3-Bay Centerflow Hopper - Gulf Mobile & Ohio (3 pkg) #1
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
HO EMD SW9 - DCC & Sound - Illinois Central (IC Black Scheme) #467
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Illinois Central:
Delivered in 1951
Road style end rails with drop steps
Short side handrails
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1779
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO Gunderson Multi-Max Auto Rack - Utah Central Railway #1044
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
HO PC&F 5241 CUFT - Boxcar - EEC Patch 2 - Single Car #3155
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
9ml pan (D) - Burnt Sienna Shade
Each PanPastel Color is loaded with the highest quality artists pigments; and is made using a unique manufacturing process requiring minimal binder, resulting in rich, ultra soft and low dust colors. PanPastel Colors can be mixed for an infinite palette of colors.
Each pan contains 9ml (0.30 fl oz) of color. 40percent more than the average pastel stick, and yielding approx. 4-5 times more coverage.
HO 40Ft PS-1 Boxcar - Lake Superior & Ishpeming #2426
Date: BLT 8-58
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
.040in x .1875in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
6in x 12in SHEET
HO 40ft Fruehauf Trailer - Mo-Pac #202241
Era: 1971-1990, 1991-2009, 2010-Present Day
MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- 2 or 4 door rods per prototype
- Wheeled or shoe-style landing gear per prototype
- Fully-assembled and ready to use out of the box
- Highly-detailed, injection-molded body
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Weyerhaeuser #1117
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Peterbilt 579 Sleeper Cab Tractor - 53ft Reefer Trailer - Doug Andrus Trucking (maroon, white)
This fully assembled HO Scale Kenworth T680 Sleeper Cab Tractor with 53Ft Dry Van Trailer from Trucks n Stuff is perfect for your modern-era highway scenes or as part of your vehicle collection. The tractor is patterned after a widely used tractor and features a detailed die cast body with injection-molded details. The 53Ft Dry Van Trailer features a detailed plastic body with factory-applied details and realistic decoration. This model is assembled and ready for your layout scenes or truck collection.
HO International CE School Bus - Assembled - Yellow/White
Product Information
Licensed Replica of Popular International Bus
Must-Have for HO Model Railroads
Perfect Size for Collectors
Positionable Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
Get the kids to school safe and on time with a fleet of these buses serving your school district. Integrated Coach built thousands of CE School Buses beginning in 2002 and many continue their duties today, all over North America.
INTERNATIONAL(R) and other International Truck trademarks are licensed by International Truck Intellectual Property Company, LLC.
#1708 Roundhead Stainless Steel Screws 2-56 x 3/8inch- 12pcs
HO MLW M420 - DC/DCC Ready - Canadian National (North American Scheme) #3576
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO 68Ft Bulkhead Flatcar - BNSF #546014
Features:
Side stake pockets
Simulated tie-loops
Fishbelly center-sill
Prototypical pull-plates and lift rings
HO ACF 2970 Covered Hopper - CSXT #220634
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons, stirrup steps and brake wheel
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Screw-mounted express-type trucks
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
All Scale Track Cutter
Xuron track cutters are suitable for use with HO, N and Z Scale nickel silver rail. The track cutter provides clean, flat cuts to speed laying track.
HO Scale H1b Hudson Steam - DC/DCC Ready - Canadian Pacific (Spans the World) #2815
-Late walkway w/smoke deflectors
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO EMD GP9 Phase 2 w/High Hood - DCC & Sound - GTW #4443
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
Product Information
The WalthersMainline Phase II High-Hood GP9 is a must-have model for your first-generation diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as -phase two- GP9s. Like its prototypes, many still going strong today, the WalthersMainline Phase II High Hood GP9 is the perfect power for any assignment and features:
Standard high short hood
Based on as-built units produced from 1955 to 1957 (Phase II)
Limited edition - one time run of these roadnumbers!
Scale width hood with correct contours
With or without dynamic brakes as appropriate
Front and rear footboards
See-through steps
Same powerful drive as WalthersProto(R) locos featuring:
Five-pole skew-wound motor
14 to 1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Machined brass flywheel
Heavy die-cast metal chassis
Constant and directional LED headlights
21-pin DCC plug
Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately)
HO 53ft Reefer Container - JB Hunt
A cool addition to contemporary HO intermodal operations, the Scenemaster 53ft Reefer Container will look great on rails or roads!
Features include:
- All-new model!
- Prototypes now in domestic service across North America hauling perishable food products
- Highly detailed refrigeration unit
- Realistic body details
- Colorful, contemporary paint and lettering schemes
- Perfect loads for WalthersProto or WalthersMainline well cars (sold separately)
- Instant detail for terminals, highways and industrial scenes
- Fully assembled, ready to use
N Scale Locomotive Coupler Conversion Kits - Con-Cor PB-1 Powered
Description
N Scale Package includes one front and one rear coupler. This conversion fits: Con-Cor: PB-1 diesel.
HO 53ft Singamas Corrugated-Side Container - Canadian National
(gray, red; Three Modes, Noodle Logo)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes
HO RTR 33,900 Gallon LPG Tank/ Flat - UTLX #910453
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Three different body phases: early, flat panel, and late
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports and tank saddles
Photo etched metal walkways and end platforms
Wire safety rails and end handrails
Printed placards
Full underframe detail featuring body mounted brakes or truck mounted brakes as per prototype
Body-mounted, McHenry scale double-shelf knuckle couplers
100 ton trucks with animated rotating bearing caps
Machined metal wheels with RP25 contours
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Weighted for optimum performance
Minimum radius: 18inch — Recommended radius: 22inch
HO Scale 40Ft Down-Line Regulator Assembly Kit
The natural poles in this kit come already painted depicting weather-stained, pressure treated wood. The other parts are cast in metal -just like the prototype- and ready to be painted. The kit comes with everything that you see in the picture, including the wires needed to make this look like the real thing Duro Brand CA glue recommended. The transformers in this kit feature our large sized transformers.
A word about our Power Pole Kits: A 30 Ft. HO Scaled pole would be 4.1 inches in height. A 40 Ft. pole would be 5.5 inches. These poles are sharpened on the base and are slightly taller than these dimensions to allow for pole insertion into your scenery.
HO Scale Thrall 53Ft Articulated Well Car Set - TTX (Blue Ex-BRAN) #888685 (3pkg)
Features:
Each car consists of three wells--A,B & C.
Walkway variants specific to prototype
Etched metal detailing
Detailed air reservoirs
Detailed brake valves
Sharp hand grabs and stirrups
Runs on 18inch radius
Recommended for 22inch radius
Floor pin holes for Atlas and other brands of containers
Product Information
When the domestic intermodal container market settled out in the late 90s, the 53Ft long container emerged the winner. Car builders responded with new wells of like size to accommodate the new standard. Introduced in series service in early 2000, Thralls triple 53Ft articulated well car was certainly the best looking of the 53Ft wells. Angular wheel cutouts, 3 flared-bottom wide and 8 narrow side posts give this intermodal age well car character.
Code 55 Nickel-Silver Rail Joiners
RTR 60Ft Gundreson Box Car - GACX (3-pkg)
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
#1703 Roundhead Stainless Steel Screws 2-56 x 1/8inch- 12pcs
HO Detail Set for Athearn Genesis - SD70M Union Pacific
Contains the Following Parts:
- Snow Plow (PL-303)
- Fuel Tank Details
- Air Tank Details
- Sander Pipe Details for Trucks
- Fuel Tank Brackets
- Air Filter Details W/Mounts
- Brake-Vent Regulators (BV-245)
- Various Underframe Parts
- Air Horn P-3 (AH-175)
- Spare Knuckle and Holder (SK-196)
Additional Parts Added:
- AU-300 Auxiliary Detail Set
HO - Siemens ACS-64 - DCC & Sound - Amtrak/Demonstrator (Flag)
Features:
DCC sound-equipped ACS-64 includes a TCS WOWSound CD-Quality 16-bit 44,100Hz decoder with Audio Assist
Sounds package includes: horn, bell, cooling fan/power inverter, pantograph extension and retraction, coupler close/release, brake release and application, momentum, crew alert, grade crossing quill, departing and arriving station announcements, and more
Keep-Alive device for uninterrupted operation, even over dirty track and remappable light functions, die-cast frame, and selector switch for choice between rail and pantograph operation.
Performs best on 22inch radius curves or greater
HO Scale 1:87
Product Measurements: L 9.5 in., W 1.5 in., H 2 in.
Retail Package Measurements: L 12.5 in., W 2 in., H 3.5 in.
Track Maintenance Roto Wheel Cleaner Replacement Roto Pads for HO Scale, N Scale Tracks
Replacement pads for Roto Wheel Cleaner(#785-4561 HO and 785-4560 N), sold separately.
Easy to apply
Will not scratch wheels
G2 SD70M-2 - DCC Ready - VTR #431
Genisis 2.0 Features:
See-through pilot steps, Lit Marker Lights (CN)
LIT numberboards & ground lights
Detailed Information
VTR NOTES:
Starting in 2007, Florida East Coast leased four blue-and-yellow SD70M-2s for mainline service. When the lease expired in 2015, the units were purchased by First Union Rail and subsequently split between Vermont Railway and Providence & Worcester, with two units going to each railroad. Vermont Railways units were soon painted into that roads attractive scheme of red with white trim, and continue to see service on mainline trains today.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Etched see-through steps
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
HO SD70ACU - DCC & Sound - Canadian Pacific (Heritage Scheme) #7019
ETA: October 2023
Detailed Information:
CP FEATURES:
CP Heritage Units with -Block- lettering and alternate masking
Heritage Unit nose detail configuration
Blue flag bracket
High mounted nose door lock
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Maxi I Well Car - 40 Ft- 5 Car Set - Early - K Line/ Rail Bridge #1012
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched walkways
Separately applied brake piping and trainline hoses
Fine ladder detail
Delicate cross-bracing on the floor
Weighted for optimum performance
Razor sharp painting and printing
Prototypically correct 33 In and 38 In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry lower shelf operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18 In
Talus - Extra Coarse Gray (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings and or road cuts. Intermix grades and blend shades for the most realism. Color Natural Talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle Talus and secure with Scenic Cement (#191).
Particle size- Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
Dalman 2-Level (Talgo Style w/Knuckle Coupler)
with Medium Extension Magne-Matic couplers - Assembled
For Con-Cor and Bachmann cars, rolling stock
This style, considered -modern era- came on the scene in the late -60s.
HO EMD SD70M-2 Diesel - DCC & Sound - New Brunswick Southern Railway #6402
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
NBSR FEATURES:
Former NS units
Front and rear ditch lights
PTC antennas
The New Brunswick Southern Railway is a Canadian short line which, combined with its sister company Eastern Maine Railway, connects Saint John, New Brunswick, with Brownville Junction, Maine. A sister company, Maine Northern Railway operates a separate 258 mile line. In 2021, a group of six former Norfolk Southern SD70M-2 locomotives arrived on the property. Painted green and yellow, each component roads
name is on two locomotives; all are owned by the New Brunswick Southern.
ROAD NUMBER SPECIFIC FEATURES:
#6401 New Brunswick Southern lettering
#6402 New Brunswick Southern lettering
#6403 Maine Northern lettering
#6404 Maine Northern lettering
#6405 Eastern Maine Lettering
#6406 Eastern Maine Lettering
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO GMD SD40-2 - DCC & Sound - Ontario Northland #1733
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
N Budd RDC-1 (Ph 2) - DC/Silent - BC Rail (Blue)
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height
Athearn - HO RTR PS-2 2600 Covered Hopper -Winchester & Western - #4004
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
HO ET44 Tier 4 - DCC Equipped - CN/100th Anniversary #3242
Road number 3108 Has a black cab roof; does not have the circle graphic on the nose
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
N Scale 3-Dome Tank Car - Ready to Run Silver Series - Quaker State
Product Information
This Bachmann Silver Series ACF 36ft 6inch 10,000-Gallon Tank Car is based on cars used to carry a variety of petroleum products for many decades. This detailed N Scale tank car is complete with separate handrails and ladders, realistic decoration, metal wheels and body-mounted E-Z Mate knuckle couplers
HO ALCo RS-3 - DCC/Sound - Interstate #32
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO NSC Ballast Hopper - Union Pacific (Early) #901103
1976+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO 24ft Galvanized Steel Grain Bin - Kit
(Wide - 4 inch Corrugation)
Corrugated steel grain bins are a staple in any agricultural setting, placed on farms, elevators, industries, and beside railroad tracks. Used with a variety of farm commodities, these bins provide a safe, dry place to store that commodity until it goes to market.
With several styles to choose from, these grain bins will look right at home on your layout. They feature prototypical corrugations, realistic galvanized steel appearance, various side sheet heights, and a variety of diameters.
Narrow corrugation bins have corrugations spaced a scale 2.66 inches and the rings are 32 inches tall. Wide corrugation bins have corrugations spaced 4 inches apart with 44 inch tall rings.
All bins are easy to assemble - just stack the rings, glue them together, attach the roof and you are done! Every ring comes as one solid piece, so no time consuming and messy assembly of individual side sheet pieces to create each ring, saving you time and frustration!
What size bin will fit your space? Try our grain bin size calculator or printable template.
https://www.iascaled.com/store/GrainBinSizeCalculators
https://iascaled.com/docs/ho-bin/GBM-HO.pdf
Modern Lumber Transload - Kit
Product Information:
Bring new business to your HO railroad with the Modern Lumber Transload kit! Based on facilities found in industrial parks, rail yards and distribution centers, the prototypes transfer loads from road to rail and back to road for local or long-distance delivery. Perfect for layouts from the 1990s to the present, features of this detailed Cornerstone structure kit include:
-Two covered storage sheds with interior lumber racks
-Concrete paving with between-tracks crossover - use with Code 83 WalthersTrack and others (each sold separately)
-Side-loading ramp for boxcars and oversize loads
-Office with separate windows, doors, high-efficiency furnace inlet and outlet pipes, and gas and electric meters
-Parts for 10 dimensional lumber stacks including
-Two each 2inch x 4inch x 10Ft
-Two each 4inch x 4inch x 10Ft
-Three each 2inch x 4inch x 16Ft
-Three each 4inch x 4inch x 16Ft
-Molded in five colors
Measures: Storage Sheds, each - 9-3/4 x 4-1/2 x 2-3/4inch 24.7 x 11.4 x 6.9cm Office - 4-3/4 x 5 x 2inch 12 x 12.7 x 5cm Paving Sections, each - 8-3/4 x 4-3/8 x 5/32inch 22.2 x 11.1 x 0.3cm
HO GP40 - Gold DCC & Sound - Operation Lifesaver (50th Anniversary)
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
HO Scale - 53Ft Hyundai Container Early Version 2-Pack - Trailer Bridge
Car #231972, 232684
HO 4 1/2in Green Jewels (12/pkg)
JUNECO B-11 - 4 1/2inch JEWELS - CLEAR - PACKAGE OF 12. HO SCALE - BUT CAN BE USED IN OTHER SCALES - MEASURES 0.050inch
HO Greenville 86ft Double Plug Door Box Car - B&O #492506
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Release Date: August 2021
Baltimore and Ohio (B&O) -Original 1969- offers one of the most iconic railroad logos so frequently seen on freight cars over the decades: the B&O Capitol Dome logo. Representing B&Os first order of cars, which were initially assigned to Pontiac service, these cars also include the glorious yellow -script- -Cushion Underframe- stenciling so commonly found on the railroads pre-Chessie boxcars. All of that beautiful B&O car data is present, from the intricate -Cushion Underframe- script to the tiniest -Freightmaster- branded cushioning badge on the end of the car. This 1969-built Greenville car features accurate Apex style crossover platforms and a Universal hand brake housing. Check out those 100-Ton -Low Profile- Barber S-2-C Roller Bearing Trucks, with 36inch wheels and accurate Timken rotating caps. We are pleased to offer six B&O numbers in the railroads classy blue scheme with yellow stenciling.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15155
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO 50ft NACC Boxcar - Delaware & Hudson #28037
MODEL FEATURES:
- Three road numbers
- Applied metal grab irons and etched end platforms
- Pullman Standard or Superior plug doors
- Pullman Standard or Stanray (Superior) roof (to match prototype)
- Ready-To-Roll 70 ton trucks
- Machined 33 inch metal wheels with RP25 contours
- Body mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Minimum radius: 18 inches
HO GP7 - DCC Ready - Bangor And Aroostook #1776
ETA: November 2022
Detailed Information
BAR FEATURES:
Winterization hatch
Bell mounted on short hood
Sloped pilots with footboards
Large fuel tanks
Square MU boxes with pipe bases and dual receptacles
BAR was an early supporter of EMDs road switcher concept, purchasing 12 GP7s in late 1949 and another 4 in 1952. Starting in the early 1960s, the units were repainted in a simplified solid blue scheme. The former BAR 73 was selected in 1975 to receive a colorful scheme of red, white, and blue to commemorate the nations Bicentennial. The unit carried the name Jeremiah OBrien, a Maine patriot, and a new number, 1776. The BAR GP7s were true travelers, being leased to the PRR starting in 1951 to assist with summer ore traffic, an agreement which lasted through the Penn Central era. They were also leased to the LV and LIRR to assist with power shortages on those roads.
LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch
OVR Exclusive - HO Bi-Level Auto Rack - CP Rail/TTGX #253586
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO RTR 55 F-100 Panel Truck - REA
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
HO FMC 5503 Double Door Boxcar - Minnesota, Dakota & Western #7181
Features:
Double Sliding Doors
Wire grabs
Etched parts
Plate C Box Car
X-Panel Roof
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - BNSF #545104
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Just Plug Lighting System - Nano LED (2pk) - Green
Small in size, big in brightness. Ready to plug into Light Hub, sold separately. Simulates individual bulb. 30AWG gauge wire. Two lights with 24 inches wire lead and plug.
HO RTR SW1500 Switcher - DCC & Sound - Conrail #9619
ETA: January 2023
Detailed Information
SSW FEATURES:
SP-style lighting package with -head knocker- style Gyralight fixtures
P-3 horn
Flexicoil trucks
As-delivered configuration with footboard pilots, pilot face grab irons, early cut levers and corner frame gussets
1,100 gallon fuel tank
Full cab interior
In the first half of 1968 the Cotton Belt received their first SW1500s and they came with all the features of their SP counterparts of that era.
SW 1500 LOCOMOTIVE FEATURES:
Detailed cab interior
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Drop steps unless noted
MU stands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Exhaust stacks
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
Printed numberboards
Fine scale handrails
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Motorcyclists 3 Riders and 2 Bikes
Bring new life to your layout with ready-to-use Walthers SceneMaster figure sets! Each figure is carefully sculpted with realistic detail and hand-painted (unless noted).
HO, N, TT - LED Lighting Strip w/taillight - Warm White
The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars. As usual for all ESU lighting strips, you can adjust the brightness according to your wishes with the help of a small variable resistor (potentiometer). Thanks to built-in voltage control the brightness remains almost constant even when conventional driving. To bridge prolonged power interruptions, you may add a PowerPack. Of course, the lighting strips can be arbitrarily cut to fit the cars of all manufacturers and comes with a red taillight.
HO GP18 - DCC Ready - Lehigh Valley #305
Detailed Information
LV FEATURES:
Nathan 3-chime horn
Dynamic brakes
Winterization hatch
Forward facing fuel tank
Pilot mounted footboards
One of the anthracite roads of the northeast U.S., Lehigh Valley bought four GP18s (built in mid-1960) numbered 302-305. The units served throughout the 1960s and into the mid-1970s. Lehigh Valley was folded into the U.S. governments bailout of Penn Central and became a founding member of Conrail in 1976. The collection of four GP18s went on from Lehigh Valley to serve Conrail as 7496-7499. The units initially wore patched out Lehigh Valley dress with -CR- markings and all eventually saw repainting into Conrail blue. Among the four GP18s, 304 was rebuilt with a chopped nose during the time it worked for Lehigh Valley; the other three retained high short hoods.
ROAD NUMBER SPECIFIC FEATURES:
#302
1964 era Tuscan red scheme
#303
1964 era Tuscan red scheme
#305
1971 era Cornell Red scheme with large letters and barrier stripes. Modified -cut- conductors side skirt
Long hood mounted paper air filter box
Flat-top dynamic brake fan
GP18 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Accurately-painted and printed paint schemes
Body-mounted McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
AK Interactive Pigments North Africa Dust
Ultrafine high quality pigment for modelling.
The definitive collection of pigments designed exclusively for modelers. A series of basic necessary and frequently used colors mixable between. AK Interactive pigments are much finer than any of the existing products on the market and contain nearly 3 times the quantity of other leading brands at a lower price .These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve. Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit
Spray Can - Olive Drab (100mL) TS-5
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Scenic Accents - Workers with Forklift 4 figures
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail
Assembled
The Woodland Scenics(R) Grillin & Chillin Trailer features a large front deck with an awning, trashcan, a TV antenna for entertainment on rainy days and a window air conditioning unit for beating the summer heat. This Built-&-Ready Landmark Structure comes with a printed interior and two LED lights. The installed LED lighting is designed for use with the Just Plug(R) Lighting System. 50mA current draw.
HO ALCo RS-3 - DCC Ready - Delaware & Hudson #4075
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4565
8inch stripe w/out water expansion tank, w/ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
HO SD60E - DCC & Sound - Norfolk Southern NS #9-1-1
Detailed Information
NS 9-1-1 FEATURES:
3900 gallon EMD fuel tank
Cab mounted PTC antenna array
NS designed snow plow
Horse head style blower duct kick plate
Different cab panel louver arrangement per prototype
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
LED lighting including:
Headlights
Illuminated deck mounted ditchlights front and rear
Numberboards
Ground lights above front trucks
Long hood mounted Nathan 5-chime air horn
Sunshades
Rounded or rectangular cab windows per prototype
Flexible rubber multiple unit (MU) hoses with silver glad hands
Flexible rubber front and rear trainline air hose with silver glad hands
Step wells feature seperately applied individual see through photo-etch steps
Coupler cut levers with loops
Anticlimbers
Safety tread on the walkways
Anti-glare panel painted on the nose
Factory applied photo-etch windshield wipers & lift rings
See through and tinted cab windows
Detailed and painted cab interior with control stand, display screens, detailed crew seats
See-through radiator fans
Factory installed wire grab irons
Fine-scale handrails for scale appearance
Underframe mounted E-bell
HT-C trucks with Timken bearings
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
McHenry scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Recommended radius: 22inch
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Frame mounted 1inch high fidelity premium speaker
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO EMD GP7R - DCC & Sound - Chicago & North Western CNW #4193
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
CNW FEATURES:
NEW! Non-Dynamic with roof access hatches
1700-gallon fuel tank
Partial skirting above fuel tank
All-weather firemans side window
Flashing xenon strobe (in DCC mode only)
Wheel bearings per prototype
Era: 1982+
Era: 1993+
Era: 1982+
Chicago & North Western-
-Union Pacific Licensed Product
These Ex-CRI&P units were purchased by C&NW second-hand from Precision National in 1981, serving the railroad in a variety of service for the next 15+ years. 4160 became inoperable in 1998. In 2007 it was moved to the Illinois Railway Museum and repainted into the blue and white Rock Island paint scheme.
ROAD NUMBER SPECIFIC FEATURES:
#4140 Phase III body, 5-Chime Horn, Firecracker antenna, Front snowplow
#4160 Phase II body with 86inch Doors, 3-Chime Horn, Spark arrestors, Front snowplow
#4193 Phase II body with 86inch Doors, 5-Chime Horn, Front snowplow
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Metal Burnishing Fluid - 100mL
A new faster formula (works in seconds), and at a more competitive price. This has extensively tested and formulated, and improved this product, at AK-Interactive. With their Metal Burnishing fluid, you can naturally weather and rust white metal tracks. Just dip the tracks in the liquid for a few seconds and the metal will begin to appear dark and rusty very quickly, easily and effortlessly. You can vary the effect using different dilutions and varying lengths of soak. Using less product, you can achieve even better results than with their previous formula.
HO Value Line RTR - 13 Panel Coalporter - CSXT (Gray) #390355
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Resin Prep
NEW Size - now in 8 ozs
Sylvan Scale Models own brand of mould release cleaner. Effectively removes all traces of mould release agent from cast resin parts, allowing for better paint adhesion. This is an organic, pleasant smelling citrus based cleaner that does not contain any petroleum distillates. Do not allow this or other solvent type cleaners to come in contact with styrene. Follow directions and cautions on bottle. Sold ONLY at hobby shops. Each bottle contains 3 ounces. A -must have- on every resin kit modellers hobby bench.
Soundtraxx - TSU8F -PNP Baldwin and Others, 8Function Tsunami 2 Sound Decoder - Plug and Play Form Factor
The TSU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturers diesel models such as those made by Atlas, Athearn, Bowser, Kato and InterMountain Models. It is suitable for a wide variety of models from HO to S scale. The TSU2-PNP8 includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. There are two additional function outputs added to the existing TSU2-PNP design using the same lighting circuit and processor pins added for FX7 and FX8. Lighting outputs are compatible with 12-14V bulbs, 1.5V bulbs or LEDs with external resistors.
Features:
Tsunami2 diesel sound decoders are full of new features including over 50 sound effects including engine startup and shutdown, engine prime mover through all eight notches, Straight-to-8, HEP mode, 13 bells, over 40 airhorns, 4 air compressors, dynamic brakes, radiator fans, brake squeal, and more!
Each diesel version (EMD, GE, etc.) contains up to 9 manufacturer specific prime movers (Turbo, Non-turbo, etc.)
First ever Diesel Dynamic Digital Exhaust (DDE) for a more authentic operating experience
Startup, shutdown and exhaust through 8 notches
Automatic or manual notching
Functioning dynamic brake with variable load sound and adjustable braking rate
Over 40 air horns
Selectable compressors, bells, and couplers
First ever Fireman Ed is ready to work on the locomotive, with general service, cab sounds and more!
Clickety-clack, fueling, and authentic cab chatter add realism
Prototypically correct HEP modes and steam heat for authentic passenger train operations
Tsunami2 Overview:
The Tsunami2 is an all-new premium flagship decoder from SoundTraxx, packed with many new features and sound effects to help enhance the realism and fun with both sound and operation. Tsunami2 leads the industry in processing power with a 32-bit processor that provides the necessary horsepower to support 28 functions, 16 polyphonic sound channels, tons of sound and lighting effects, and advanced motor control.
Tsunami2 Digital Sound Decoders integrate a full-featured sound system, Hyperlight lighting effects, Hyperdrive2 advanced motor control, and a DCC decoder into a single package. Tsunami2 Digital Sound Decoders offer over 50 individual sounds, and over 20 lighting effects in each model!
We have added a host of new recordings including: whistles, horns, bells, compressors – and remastered favorites from years past. These new recordings provide nearly limitless choices for your customer! Multiple prototypes in every model means no time spent on a computer downloading files or purchasing special programs. In addition, more powerful audio output, two volume mixers, and our ever-popular Equalizer make the digitized recordings of real engines loud, clear and ultra-flexible.
1:87 1980 Flxible 53102 Transit Bus, AC Transit San Francisco
HO SD60 - DCC/Sound - Chicago & North Western #8041
MODEL FEATURES:
Locomotives come with railroad-specific details including: Operating beacon (in DCC/Sound version), horn, winterized hatch, antenna, handrails, etc.
SPECIFICATIONS:
DCC: Equipped with Econami2
PROTOTYPE MANUFACTURER: EMD
Axles: 6
LIGHTED: LED Lighting
PROTOTYPE AND BACKGROUND INFO:
In 1984, Electro-Motive (EMD) introduced the 60 series locomotive. These had many improvements over the earlier models including features such as: New and improved EMD 710 power plant producing 3600 HP, wheel slip control, computerized cabinet replacing the older and unreliable components.
This design spawned into many other upgrades within its class like the modernized wide cab, Isolated cab, and even the start of AC traction technology.
These locomotives were suited for just about any mainline service that could be thrown at them. The model was fairly popular with class one railroads, with Norfolk Southern purchasing the most at 151 units. Most of them are still in service today. Norfolk Southern in 2010 started a large full rebuild program of their SD60s (including purchasing cores from other sources) into SD60Es, which rebuilt them from the frame up with new electrical components and a newly designed cab to improve visibility and forward crash impact safety.
HO Shredded Scrap Metal Pile - 4-1/4 x 3-1/4 Inches
Pre-painted cast-resin junk piles are ideal for adding realism to your scenes and cars.
N Scenic Accent Figures - Children
HO 100-Ton Open Hopper - BNSF #616657
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
Fine Turf - Soil
25.2 Cubic Inches Per Package
Use Soil Fine Turf to model realistic grass, low ground cover and for highlighting and accenting landscape. It is colorfast and blends naturally with other foliage. Use for any scale.
HO 5820 Covered Hopper - Procor/UNPX (Union Carbide) #122068
Era: November 1977+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO 20ft Corrugated Container - CGM/CGTU #2 (3pk)
MODEL FEATURES:
- Fully-assembled
- Easily stackable
- Each container is individually numbered
PROTOTYPE AND BACKGROUND INFO:
An intermodal container is a large, standardized shipping container, designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport ? from ship to rail to truck ? without unloading and reloading their cargo. Corrugating the sheet metal used for the sides and roof contributes significantly to the containers rigidity and stacking strength, just like in corrugated iron or in cardboard boxes. International containers have castings with openings for twistlock fasteners 20 feet apart on the eight corners, to allow gripping the box from above, below, or the side, and they can be stacked up to five units high for storage.
HO Vancouver Iron Works Piggyback Flatcar - Canadian National #688025
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
RSC-14, DCC & Sound - Undecorated
Era:1975 - early 1990s
The Rapido Trains RSC-14 features include:
-Accurately designed using a 3D sscan of a real RS-18 and accurate measurements of real A-1-A trucks
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, bi-colour class lights and illuminated cab control stand
-Roadnumber-specific intercooler detail
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail incl. traction motor cables and other piping, re-railer and other parts.
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels.
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC/Silent(21-pin DCC Ready) or DC/DCC/Sound(ESU LokSound) options
-Accurate recordings from a real ALCo 251B prime mover under load.
HO ACF PD3500 Flexi Flo Hopper -
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990
Car No. 897868
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
1948-53 Chevy COE Reefer Truck - Unpainted and Resin Cast Kit
Warm White
No electrical knowledge or special tools needed, just plug and you are done. The Just Plug(TM) Lighting System is a quick and easy way to add realism and interest to new and existing layouts and other projects. Individual bulb brightness can be controlled, and the modular design allows for easy expansion. Just Plug is compatible with DCC and works for any scale.
Features
2 lights per pack
Includes 24 inches cables
Ready to plug into Light Hub (sold separately)
Adhesive-backed for simple installation
Signal Extension Cable - All Scales Signal System Short - 12inch 30.5cm
N Scale - Modern Container Ship Kit - MV Manchester Mercurio
The Manchester Mercurio & Manchester Rapido were built in Gijon, Spain in 1971. They were chartered to Manchester Lines of England for use on the Great Lakes. Manchesters ocean going ships would deliver containers to the Port of Montreal. The containers would be reloaded onto these smaller ships for final delivery to various ports on the US side of the Great Lakes The ships were powered by a 7200BHP Sulzer 6RD68 diesel engine equipped with a reversible pitch propeller. Manchester continued this operation until about 1980 when it was discontinued. At that time the containers were brought into Halifax and transferred to rail for delivery to the US Midwest and by truck to their final destination. The charter on the ships was allowed to lapse and they were returned to the builder. They were sold to various parties over the years and operated mainly in the Mediterranean and Atlantic under different names. The Mercurio sank in 1999 and the Rapido was cut up for scrap in 2002.
Our model is suitable for most model railroads in that it is only 280 scale feet long ( 21inch). It can also be used as a regular general cargo vessel.
N Scale 50ft FMC Combo Door Boxcar - Railbox/ABOX (Early) #50456
Era: 1971-1990, 1991-2009, 2010-Present Day
MODEL FEATURES:
- Screw mounted, Roller bearing style trucks
- Scale profile brake wheel
- Accurately painted and printed for prototypical realism
- Body-mounted, McHenry operating scale knuckle couplers
- Machined metal wheels operates on Code 55 and 80 rail
- Weighted for optimum performance
- Highly detailed, injection-molded body
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO EMD SD9 - DC/Silent - Baltimore & Ohio #768
Baltimore & Ohio
- Correctly oriented cab interior for long hood forward operation
- Single fuel tank (First time done on a plastic model!)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
RTR 30RTR 30,000 Gallon Ethanol Tank Car - MWTX (3 pack)
Detailed Information
11260, 11625, 112701
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
HO RTR 68Ft Railgon Gondola - BNSF #518561
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO 70 Ton 13 Panel 3-Bay Hopper Car - Pennsylvania (H37B Simplified) #272601
Ready to Run.
Features:
Crisp details and sharp painting and printing,
metal wheels and knuckle couplers
HO 85Ft General American G85 Flatcar - Santa Fe #290787
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
HO G2 SD80MAC - DCC & Sound - Conrail #4108
Detailed Information
CR FEATURES:
As-delivered paint scheme
Front and rear operating red marker lights
Leslie 3-chime horn
Small EMD front plow
Pilot mounted front ditch lights
In 1995, Conrail placed an order for 30 SD80MACs, being the sole original purchaser. They were painted like the then-recently delivered SD70MACs. This would end up being the last new locomotive order CR would place before they were split up between CSX and NS in 1999.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
CV chart included in the box
HO U30C Phase 1 Gold - DCC & Sound - Delaware & Hudson #703
MASTER MODEL FEATURES:
Adirondack floating bolster trucks with or without bearing caps as appropriate per railroad
Coupler pocket designed to accept AccuMate Proto-couplers
Golden-white LEDs
Antenna detail where appropriate per road name
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Directional lighting
With or without nose headlight as appropriate per railroad
Non-operating cab roof-top beacon detail where appropriate per road name
Detailed crew members
Marker lights with separate lenses
Snowplow
Separately-applied drop steps
Recommended radius: 22inch
ANALOG (DC) OPERATION FEATURES:
Please note that the Atlas Quantum Engineer will NOT operate an Atlas Gold Series locomotive equipped with a LokSound Select decoder on an analog (DC) layout. However, the sound and lighting functions of the LokSound Select decoder in the Atlas Gold Series U30C locomotive can be controlled by an easy-to-use basic DCC system
Also note that on a DC-powered layout, a DCC and sound equipped locomotive (such as the Atlas Gold Series U30C) CANNOT be consisted with another locomotive that does not
also have both DCC and sound. (This statement does NOT apply to DCC-equipped locomotives operating on a DCC layout.
Sound Functionality Features (Gold Models with ESU Sound Only ):
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals. Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided for true realism.
DCC OPERATION FEATURES:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
A total of six DCC function outputs are available
Follows all NMRA DCC standards and recommended practices.
Note: Due to the higher starting voltage required to operate the sound system, it is not possible to MU a non-sound-equipped loco in DC (analog) mode
N Scale 50ft FMC Combo Door Boxcar - Railbox/ABOX #51952
Era: 2010-Present Day
MODEL FEATURES:
- Screw mounted, Roller bearing style trucks
- Scale profile brake wheel
- Accurately painted and printed for prototypical realism
- Body-mounted, McHenry operating scale knuckle couplers
- Machined metal wheels operates on Code 55 and 80 rail
- Weighted for optimum performance
- Highly detailed, injection-molded body
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO MLW M630 - DCC & Sound - BC Rail #722
R-W-B Hockey Stick, recessed nose ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound V5 decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
HO EMD SD9 - ESU LokSound 5 Sound & DCC - DM&IR Arrowhead #158
Power up your HO freight operations with Walthers Proto SD9 diesels!
The debut of the SD9 in 1954 marked the next step forward for EMD's Special Duty line of six-axle diesels, and introduced the new 567C prime mover delivering 1,750 horsepower. Ideal for demanding assignments in helper, yard, transfer and heavy freight service, with its weight spread over six axles, the SD9 was also well suited to branch line duties. By the time production ended in 1959, 515 SD9s were in service on over a dozen railroads and some are still going strong!
From superb paint and lettering to railroad-specific details, and available with ESU LokSound Select for DCC and DC layouts, WalthersProto SD9 locos come ready for service and feature:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1954 to the present - several preserved today
Used in helper, yard, transfer, heavy freight and branch line service
Available with ESU LokSound 5 sound and DCC for DCC or DC layouts
Road- and era-specific details
Formed wire grab irons
Etched-metal lift rings
21-pin DCC plug
Correct size RP-25 metal wheels
All-wheel drive and electrical pick up
5 pole, skew-wound, high-torque, high-efficiency can motor
Helical gears with 14:1 ratio for smooth, quiet running
Easy multiple-unit operation
Superb paint and lettering
Warm white LED constant and directional headlights
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
Road-specific features of this WalthersProto replica include:
Brass Nathan P3 air horn
Whip-style radio antenna w/mast and SP-style conduit
SP 5-light package w/Mars dual sealed-beam headlights, Gyralight & UDE emergency light for DCC; operating headlights & front Gyralight on DC units
Cab-mount wind deflectors
Photo-etched cab sunshades
Rolled-style handrail stanchions
Drop steps
SP-style pilot plows front and rear
Dynamic brakes
Roof-mounted air cooling piping
MU hoses
Bi-Level Auto Racks - BNSF Rack & Flat Car - Circle Logo #300309
Tru Color Paint - Acrylic - Light Imitation Gold - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Weyerhaeuser #1110
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
G2 SD70M-2 - DCC Ready - CN #8921
Genisis 2.0 Features:
See-through pilot steps, Lit Marker Lights (CN)
LIT numberboards & ground lights
Detailed Information
CN NOTES:
Part of CNs large fleet of SD70M-2s, these units are equipped with operating marker lights for DPU service. As part of the railroads new heritage program, CN 8952 was painted in the GTW scheme, and CN 8898 received the the special placards celebrating CN independence on the sides of its nose.
ROAD NUMBER SPECIFIC FEATURES:
#8898
White cab roof
CN heritage decals on each side
#8921
Standard CN Web Address paint scheme
#8934
Mismatched compartment doors on left side
#8952
Grand Truck Western Heritage Unit
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Etched see-through steps
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
N Scale 36ft Wide-Vision Caboose - Chesapeake & Ohio #3260
The Wide-Vision Caboose (also known as Extended-Vision Caboose) was designed with a wider cupola projecting from its sides. After World War II, train cars began to be taller and wider than their predecessors. The extended cupola assisted the trains crew in seeing beyond both the tops and sides of the train cars ahead. This caboose design saw service on most U.S. Railroads. Bachmanns Wide-Vision Cabooses are fully assembled and come in a variety of colors and road names.
FEATURES INCLUDE:
- highly detailed painted bodies with precision graphics
- blackened machined metal wheels with RP25 contours
- magnetically operated, body-mounted E-Z Mate Mark II couplers
- non-magnetic blackened brass axles with needle-point bearings
- Celcon trucks
- added weight for optimum tracking performance
- N scale 1:160
HO 40Ft Fruehauf Fluted Side Volume Van - Northern Pacific #50-396
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
HO MLW M630 - DCC & Sound - British Columbia Railway BCR #721
Two tone green w/lightning stripe, Face mounted ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound V5 decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - New Haven (Script) #30172
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO RTR 45Ft Fruehauf Z-Van Trailer - Conrail/ Trailvan #202204
Detailed Information
MODEL FEATURES:
Separately applied mud flaps
Rubber tires
Fully-assembled and ready to use out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
HO Portec 3000 Covered Hopper - Boston & Maine
Features:
- Ready to run
- Injection molded plastic
- Fine scale detail with many separately applied parts
- 2 Body and roofwalk variations to accurately match the prototype
- 2 styles of vibrator brackets
- Highly detailed end cages and brake gear
- 100 Ton Trucks
- Metal Couplers
- Etched metal roofwalks and end platforms
- Crisp painting and printing
HO GMD SD40-2 - DCC Ready - Algoma Central #185
Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound Select decoder. Analog (DC) version has 21 pin socket for DCC module.
Bowser does not recommend LOK sound locos for use on DC layouts.
Features LokSound Select decoder, GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, Flywheels, Can motor, RP25 flange, KD couplers
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
HO RTR SD40 (SD40-2) - DCC Ready - FURX #3001
Detailed Information
FURX FEATURES:
SD40 rebuilds, from many sources
Front ditch lights
Correct details per road number
Rear mounted break wheel
ROAD NUMBER SPECIFIC FEATURES:
#3001
Ex-SOO. Smaller 3600 gal fuel tank
extended range dynamic brakes
large EMD plow
deck mounted front ditch lights
#3005
Ex NDM. Large 4000 gal fuell tank
extended range dynamic brakes
Canadian style plow
pilot mounted front ditch lights
#3025
Ex-MP. Large 4000 gal fuel tank
regular dynamic brakes
small EMD plow
pilot mounted front ditch lights
extra MP style jacking pads
LOCOMOTIVE FEATURES:
LED lighting
Photo-etched stainless steel windshield wipers
Fully assembled and ready-to-run
Separately applied wire grab irons
Separately applied air tanks
Coupler cut levers
Rubber MU hoses
Fine scale handrails molded in engineering plastic
Non-sound version features 21-pin NEM DCC plug
See-through dynamic brake and radiator fans
Curved radiator fan grab iron
Exhaust stack
Frame mounted bell (unless noted)
Detailed 4000 gallon fuel tank (unless different capacity is noted)
Flexicoil-C trucks with high or low brake cylinders (per prototype)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body featuring new tooling
Painted and printed for realistic decoration
See through cab windows
Bi-directional LED lighting
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
Recommended radius: 22inch
HO 36in Normal Tread - All Metal Precision Wheelsets-12pk
Tangent Scale Models is proud to offer our 36inch -normal tread- CNC-machined brass wheelsets for those who want to replace their current wheels with wheels that roll better and look better than those from other brands. Tangent wheels are leaders in quality in HO scale. We offer them in 100 count bags and 12 count blister packages. Offered in a 1.004inch axle length, our 36inch wheels can be used in trucks from virtually any brand. 36-inch prototype wheels are used on virtually all cars greater than 80 tons, making them the most common wheel for post-1960 modeling (with increasing frequency as time went on). Try our wheels to improve the operation of your equipment!
40Ft Refrigerated Container [3-Pack] NYK Line Set #1
Set Numbers Include:711406, 711450, 711474
MASTER MODEL FEATURES:
Prototypically accurate Daikin reefers
40-foot High-Cube Refrigerated Container
Composite materials sandwich-sides design
Detailed picture window refrigeration unit with separate parts
ISO Type 45R1
Five hinge / four bar doors with OUT style handles
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Black
HO SD70ACe - DCC Ready - Union Pacific #8679
Overview
UP FEATURES:
Unique paint scheme with no flag
Hood, cab, cab roof, and headlight placement vary per prototype
UP 8321 was the first, and for some time only, SD70ACe on the roster to be repainted without the American Flag. The early-production unit features as-built cab roof details, a rear horn bracket, and non-isolated cab.
SD70ACE SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Early - Staley #35094
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO Scenic Accent Figures - Backyard Basics (5 pkg)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism.
HO 53ft Jindo Container - Canadian Pacific Set #2 (3pk)
(#234456, 234467, 234474) (RED/WHITE)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting
N Scenic Accents(R) -- Family Fishing
HO EMD SW9 - DC/ Silent - Canadian National (CN Black Scheme) #7004
Photo says: Model will include various detail parts to modernize appearance
Preliminary artwork and drawings. Subject to changes or revisions before production
Canadian National:
Delivered in 1952 / GMDD
CN style spark arrestors (in polybag)
Large barrel style headlight
Frame mounted side handrails
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO Enterprise 2-Bay Covered Hopper - GFCX #101
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127481
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
1955-56 GMC 1/2 Ton Pickup - Unpainted and Resin Cast Kit
G2 SD70M-2 - DCC & Sound - FEC #107
Genisis 2.0 Features:
See-through pilot steps, Lit Marker Lights (CN)
LIT numberboards & ground lights
Detailed Information
FEC NOTES:
Florida East Coast received a group of 4 SD70M-2s in 2008, painted in the RailAmerica scheme. The units were often found on mainline trains with GP40-2s, SD40-2s and the roads other SD70M-2s.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Etched see-through steps
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
HO Scenic Accents - Sitting & Waiting (7pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
This set includes two men, three women, a child and a dog. A mother and her child wait, perhaps for a bus. A dog sits close by. A woman and man sit, engaged in conversation and another man and woman sit close together, just enjoying each others company.
HO Seated People - Set #1 (7pcs)
Bring new life to your layout with ready-to-use Walthers SceneMaster figure sets. Each figure is carefully sculpted with realistic detail and hand-painted (unless noted).
NOTE: Only 1 bench is included.
Craft Plywood Sheet - 6 x 12inch x 1/2inch Thick - (3 pkg)
Perfect for painting, staining, stenciling and wood burning
Cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use
1/2inch (1.27cm) Thick x 6 x 12inch (15.2 x 30.4cm)
6 piece package
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov
GLa 2-Bay Hopper: PRR Circle Keystone #168912
Detail Variations:
Single car
As operated from 1934 to 1954
Features:
All-new tooling
Scaled from original blueprints
Die cast frame and floor for optimum weight
Full interior rivet and bracing details
Factory installed wire grab irons
K- or AB-brake gear installed as appropriate
Factory installed Kadee #158 couplers in narrow draft gear box
Turned metal wheels in correct PRR 12D-F8 trucks
Accurate paint and lettering
Multiple road numbers available for each paint scheme and railroad
HO Bi-Level Auto Rack - Norfolk Southern/TTGX Flat Car #704294
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
Cement for Plastics/Polystyrene - 5/8 fl oz Tube
Cement for Plastic Models is specially formulated for joining all polystyrene plastics and can be used in the construction of plastic model kits and may also repair many common household products made of polystyrene or ABS plastics.
DIRECTIONS FOR USE:
Pre-assemble parts without cement to insure proper fit. Trim or file where necessary. When cementing painted or plated parts, scrape away paint or plating from surfaces to be joined. Apply cement sparingly to one surface and press firmly together.
AVOID CEMENT ON FINGER TIPS, AS GLUE SMUDGED ON AREAS NOT TO BE JOINED CANNOT BE REMOVED.
It will also discolor or cloud up clear parts.
Do not use on clear parts.
Norfolk Southern #7228
EMD SD80MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Models equipped with marker lights will be illuminated
Rubber MU hoses for durability
All New Tooling
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
See through steps
Illuminated ground lights
Front and Rear Illuminated Numberboards
Presenting EMDs 5,000HP 6-axle diesel in a whole new level of authenticity. Starting in 1995, EMD revived the 20 cylinder engine design, last seen in the SD45, and introduced the 5,000 HP SD80MAC. Athearn is pleased to announce this locomotive in Genesis 2.0.
NS FEATURES:
Illuminated Ditchlights alternately flash per prototype w/ effect on DCC+Sound version
#7228:
Ex CSX unit with walkway mounted digital fuel gauge
Ex CSX style roof and antennas
Cab marker lights plated over.
Rear marker lights present & painted over
Equipped with RS-3L air horn.
LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE:
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
N Scale Short Barrel Ore Hopper - CN Mineral Brown #346062
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO 50ft Covered Gondola - NKP #44814
MODEL FEATURES:
- 70-ton Roller Bearing trucks
- Removable cover
- Separately-applied brake wheel
- Weighted for optimum performance
- 33 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Body-mounted McHenry operating scale knuckle couplers
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inch
PROTOTYPE AND BACKGROUND INFO:
Gondolas are low-sided railroad cars that are used for hauling bulky loads that don not need protection from the weather. The Roundhouse 50ft gondola is representative of larger cars that began appearing on the rails in the early 1950s, and many survive today working for modern roads and contractors.
HO Siemens ALC-42 Charger - Amtrak
Based on the highly successful SC-44 Charger, the ALC-42 is designed specifically for cross-country service on Americas most scenic and storied routes, displaying an updated appearance with a new nose profile and cab door configuration. Thanks to both Siemens and Amtrak(R), Bachmanns ALC-42 has been developed using original design documentation and employs prototype field recordings for maximum realism. Features include a TCS WOWSound(R) CD-quality 16-bit 44,100Hz decoder with Audio Assist(R) for easy configuration without CVs, and a Keep-Alive(R) device for uninterrupted operation, even over dirty track. The WOWSound(R) diesel-electric locomotive package includes an authentic horn, bell, prime mover, startup/shutdown, compressor, cooling fan, coupler close/release, brake release/application, crew alert, grade crossing quill, station announcements, and more.
Features include:
DCC sound-equipped for sound, speed, direction, and lighting control
TCS true CD quality audio in 16-bit 44,100Hz sound
Keep-Alive(R) device that keeps your engine running during power interruptions due to dirty track or loss of electrical contact
voice-guided Audio Assist(R) programming tool for easy set-up of almost all decoder functionality
dual-mode NMRA-compliant decoder
directional headlights
interior corridor work lights
marker lights
steady/alternate flashing ditch lights
die-cast frame
separately applied windshield wipers, grab irons and detail parts
performs best on 22in radius curves or greater
Alaska Railroad #1508 - DCC & Lok Sound
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, can motor, flywheels, nickel silver wheels with RP25 flanges and KD® couplers. Analog (DC) version features NMRA 8 & 21 pin plug for DCC, DCC/Sound version features LokSound Select Dual-Mode decoder which allows locomotive to be used on DC as well as on DCC layouts.
Atlas Brush Company 970-1 #1 Golden Taklon Detail Brush
HO GMD SD40-2 - DCC & Sound - CP Rail: As Delivered #5789
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
1937 Studebaker Long Wheelbase Cab and Chassis - Unpainted and Resin Cast Kit
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
N Scale AutoFlood III RD Coal Hopper - CEFX #600612
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20210
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Atlas Brush Company 255-100 10/0 Taklon Ultra Mini Brush
HO RTR PS 4740 Covered Hopper - MKT #4391
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Body-mounted McHenry operating scale knuckle couplers
36inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Multi-packs feature unique road numbers
Weighted for optimum performance
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
HO GATC 1917-Design 10,000 Gal. Tank Car - ARR Alaska Railroad 1955+ #9011
Product: GATC 1917-design 10000 Gallon Tank Car
Scale: HO Scale 1:87.1
Truck: Tangent ASF 50-Ton Cast Steel Spring Plank Truck with separate brake beams
Wheels: CNC-Machined 33inch Flat Back Wheels
ARR -Alaska Railroad- 1955+ is a tank car offering that many of you have asked for over the years. This tank car is painted in the Alaska Railroads silver tank paint scheme with black lettering, with paint and brake dates of 1955. The tanks other lettering shows a 1919 car build date. The underframe is black with white stenciling. These cars were in various services however the primary service for the fleet was to move oil from North Pole to Anchorage. Our Alaska Railroad 1955+ replicas come with era-correct AB-brakes.
HO Marine Industries Piggyback Flatcar - Canadian Pacific #505643
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
HO 85ft ACF 48-Seat Diner - Lighted - Union Pacific (City of Denver) #5011
Union Pacific Heritage Fleet
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
Built as Lunch Counter Cafe Lounge in 1959 and originally numbered 5015, this car returned to special service as the Overland in 1988, named for UPs Overland Flyer and the later Overland Limited, which were both named for UPs Overland Route.
HO GP40-2 - DCC & Sound - CSXT #6429
Detailed Information
CSX FEATURES:
Newly tooled rear slug connection boxes
Large front anticlimber
Mid production with corrugated grilles
Body-mounted side bell
Chessie/CSX style front rock plow
K5 horn
Lit class lights and number boards (effect in DCC)
During the late 1980s, CSX Transportation modified many of their GP40-2s into -slug mothers- that powered RDMT (CSX term, short for Road-Mate) road slugs. The -slug- is a term used for (in most cases) a secondary locomotive that has a removed/deactivated engine but kept its traction motors. The -mother- unit at slow speeds can produce enough power to provide electric current to other traction motors using the same amount of fuel consumption. The -mother- and -slug- combination can provide the power of two locomotives using a single diesel powered unit. CSX liked the results, and modified many older GP30 and GP35s into road slugs, retaining their cab controls so that they could still be operated in lead position, but without the noise from the prime mover.
ROAD NUMBER SPECIFIC FEATURES:
#6427
-Stripe- repaint
regular radiator fans
-mail slot- battery box doors
#6429
-Stealth- repaint
regular radiator fans
regular battery box doors
#6441
-Stealth- repaint
Q radiator fans
-mail slot- battery box doors
large exhaust silencer
nose toilet hatch
GP40-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 40Ft Ortner 100-Ton Open Aggregate Hopper - Southern Pacific #481340
Product Information
Move heavy bulk loads for your railroads customers with a fleet of WalthersProto 40Ft Ortner 100-ton Open Aggregate Hoppers. Highly detailed and fully assembled, other features include:
One time run of these roadnumbers, order now - limited quantity available!
Distinctive high-sided design in service from 1970s to present
Prototypes used for hauling heavy aggregates including limestone, iron ore and taconite pellets, gravel, sand and more
Factory-installed air-equipped door details as appropriate
Factory-installed wire grab irons and end railings
Removable load included
Detailed brake gear
Weighted for excellent tracking
Ultra-smooth rolling metal axles and RP-25 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
HO Union X-3 Tankcar - Procor Limited #37777
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO GE 44 Tonner Phase IV - DC/DCC/Sound - Canadian National (Green) #1
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
SubTerrain System Foam Accessories - Road System Paving Tape
Use this adhesive-backed foam tape to create straight-edged forms for paving, even on curves. Use to model streets, roads, sidewalks and parking lots. Easy to apply and remove. Includes Spreader. Roll makes a road approximately 15 feet long (4.57 m).
Roll measures 1/4inch w x 1/16inch h x 30Ft l (6 mm x 1.5 mm x 9.14 m)
HO 50Ft PCF B70 Boxcar - w/ Youngstown Doors - SSW/Cotton Belt #66707
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
HO 35Ft Fruehauf Integral-Post Volume Van - PRR: 1950s #35 C 537
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
N Scale 60ft Coach Car - Toronto, Hamilton, & Buffalo #72
FEATURES:
- Based upon C&NW and CNJ prototypes
- Full scale dimensions and details
- All cars include separately applied window glazing, diaphragms and roof vents
- Observation car includes separately applied end railing details and a drumhead
- Detailed interiors (excluding baggage car)
- AccuMate operating knuckle couplers
Model Wash - Dark Rust - 35ml Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Dark Rust is recommended for rust effects and winter scenes, cold scenes and decay or abandoned vehicles, metallic structures or all kind of metallic parts.
91 Interior Weathering Set - Enamel & Acrylic Paint Set (92, 93, 94,)
35ml X 3 jars per set
The interior paint of AFV s used to be a problem for even the most experienced of modelers. This set makes this task easy with three different products. First of all we have an acrylic paint which represents the interior color of German vehicles during WWII. This color also can be used for the interiors of many other AFV s. Also, we have included two weathering products, one for interior washes and another for streaking effects over the surface of interiors.
This set contains:
_ AK-092 RAL Cremeweiss.
_ AK-093 Wash for Interiors.
_ AK-094 Streaking Effects for Interior.
HO EMD GP40 - DCC & Sound - Canadian National (Large Noodle) #4017
1967+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
60ft Pullman-Standard Flatcar - Ready to Run -- TTX VTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO C&O Cupola Caboose - Detroit, Toledo & Ironton #130
Features:
True scale dimensions with accurate details
Weighted, detailed underframes
Trucks equipped with free-rolling metal wheels
Equipped with AccuMate Knuckle Couplers
Accurate painting and lettering
AccuMate couplers are made under license from AccuRail, Inc.
HO - Leslie RS3L 3-Chime Air Horn - Lost Wax Brass Casting
N Scale AutoFlood III RD Coal Hopper - CEFX #600673
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
LOCOMOTIVE FEATURES:
CN “website” scheme
CN style plow
Correct trucks per road number
Forward and reverse ditch lights
Nathan K3L horn
#5620/#5624
Late EMD trucks
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plug™ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial” truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steer”, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M” in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan” cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared” radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
EMD SD70ACe,w/DCC Ready - Progress Rail #4834
Detailed Information
NEW FEATURES FOR ALL SD70ACES IN THIS ANNOUNCEMENT:
The effort continues to enhance Athearn Genesis models per customer requests and feedback. Moving forward, the EMD SD70ACe will posess the following features:
All lighting now feature new LEDs
Rubber MU hoses for durability
PRLX FEATURES:
Ex CSX units
Cab high mount headlight
Nose door without window
Rear ladder located conductor side
#4831:
Inverter cabinet with solid X-panel compartment
#4843:
Inverter cabinet with X-panel compartment and vertical grille
SD70ACE AND SD70M-2 SPECIFIC FEATURES
New for the SD70ACe and SD70M-2, LED lighting
Correctly-sized illuminated ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or -tube- style mounting bracket
GPS Domes or PTC antennas per prototype
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Jacking pads per prototype
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
HTCR or HTSC trucks per prototype
Non-sound QuickPlug equipped with NEM 21-pin DCC plug
McHenry scale knuckle spring couplers
Minimum radius: 18inch
Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of -In Service- equipment; -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per road number matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
HO - 4750 Cubic Foot Rib-Sided - 3-Bay Covered Hopper - ICG Plain
The model is equipped with etched metal roofwalks, metal wheelsets, and metal knuckle couplers
HO 13,600 Gallon Acid Tank Car - Procor/White (PROX) #16502
ETA: July 2023
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
HO 1958 Cu Ft 2 Bay Hopper
D&RGW #18409
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
HO H-6-G - DCC & Sound - Canadian National Railway (Tilted Wafer) #1391
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO SD38 - DCC/Sound - CanDo Rail Services #5201
CCGX FEATURES:
CanDo Rail Services is a contracting company based out of Brandon, Manitoba, Canada. They preform track maintenance for large industries, operates as a shortline, and contracts switching services in Ontario, Manitoba, and Alberta Canada.
ROAD NUMBER SPECIFIC FEATURES:
#5201
- Ex: DMIR. Short fuel tank
- triple clasp brakes
- M3 horn
- UP style plows
- all-weather windows
- ditch lights on both ends
- Classified as a SD38AC
#5202
- Ex-BLE. Medium fuel tank
- high-mount truck brakes
- M3 horn
- UP style plows
- all-weather window
- ditch lights on both ends
- Classified as a SD38AC
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO MLW M420 MR20c - DCC & Sound - Canadian National (Stripes) #3560
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO - Nathan K2 K12 2-Chime Air Horn - Lost Wax Brass Casting
Basic Model Railroad Benchwork - Second Edition
Softcover Book by Jeff Wilson
Jeff Wilson covers the full range of benchwork skills and materials from beginner shelf layouts to experienced modelers assembling a room-sized layout. New color photos and illustrations highlight lift-out sections and swinging access gates.
HO Straight Roadbed Track Section - 8-15/16in (227mm) (2/pkg)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes! Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation.
Suitable for all types of layouts, temporary or permanent, this modular track system features an integrally molded roadbed for realistic appearance.
Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
HO Duplex Sleeper - Great Northern #1168 / Red Gap Pass
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
N Scale ACF 39Ft 2-Bay CF Covered Hopper - Round Hatches - CSX NYC (Tan) #875045
Product Information
This ready-to-run N Scale ACF 39Ft 2-Bay Center-Flow Covered Hopper with Round Hatches from Micro-Trains(R) is based on cars built beginning in the 1960s, making it ideal for your diesel-era freight into the 2020s and beyond. Covered hoppers such as this are used for hauling grain, fertilizer, frac sand and other bulk, granulated materials. This covered hopper features free-rolling Delrin(R) trucks with contoured axles, truck-mounted Magne-Matic(R) couplers and interior weights. Cars also include thin-profile foot stirrups, brake wheels and fine decoration. This ACF 2-Bay Center Flow Covered Hopper is one of many Micro-Trains N Scale freight cars.
577 Fine Long Weathering Brush
Specifically designed to apply washes with greater precision than a normal brush, in those hard to reach areas.
HO EMD SD7 - DCC & Sound - Rio Grande (Bumble Bee) #5304
Denver & Rio Grande Western
- Correctly replicated side sill reflectors
- Short hood forward operation
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO 40Ft PS-1 Boxcar - ATSF (Bx57 Super Chief) #31417
Date: BLT 5-50
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Southern #10168
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Universal Cable Connector
For Use with HO, N, and O signals
HO G2 Dash 9-40C - DCC Ready - Norfolk Southern #8777
NORFOLK SOUTHERN FEATURES:
- Thoroughbred paint scheme for 2013-2014 to 2018 appearance
- Each road number decorated different per repainted status
- Curved engine compartment hood profile
- Early tabbed dynamic brake intake panels
- Vertical mounted struts mounted on side frames with 40 inch wheels per prototype
- #8777: Early dynamic brake exhaust fascia
- #8820 & #8855: Late dynamic brake exhaust fascia
- Sound version features onboard DCC decoder with SoundTraxx Tsunami2 sound
DASH 9 SERIES LOCOMOTIVE FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Coupler cut levers
- Flexible rubber MU hoses for durability
- Flexible rubber trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Fine-scale Celcon handrails for scale appearance
- Windshield wipers
- Lift rings
- Wire grab irons
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Sander lines
- McHenry scale knuckle couplers - Kadee compatible
- Genesis drive line with 5-pole skew wound motor, precision machined flywheels, and multi-link drive train
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
SOUND EQUIPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO Kenworth T680 Day-Cab Tractor with Cryogenic Tank Trailer
GP7 Diesel, DCC/ Ready - B&O/ Chessie #5610
Era: 1970s+
CHESSIE FEATURES:
#5610:
Nathan M3 horn
spark arestors
non dynamic
long hood forward setup.
LOCOMOTIVE FEATURES:
Trainline and MU hoses
Coupler cut levers
Drop steps unless noted
MU stands
-Nub- style walkway tread
Bell placement & type per prototype
Fine-scale handrails for scale appearance
Wire grab irons
Lift rings
Windshield wipers
See through cab windows and full cab interior
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Sander lines
Speed recorder unless noted
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Body mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Replacement parts available
Minimum radius: 18In
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included
PROTOTYPE INFO:
In 1949, EMD introduced the GP7. The basic design followed most diesel switchers with the addition of a short hood instead of an end-cab. The hoods were also full height to better accommodate the diesel engine and mechanical and electrical components.
In 1954 EMD upgraded the GP7 to become the 1,750 horsepower GP9. Externally, the first GP9s were virtually unchanged from the last GP7s. Later versions would include different louver arrangements and the last ones would come without the frame skirting. The GP9 was available with all of the fuel tank, steam generator, and dynamic brake options as the GP7, including -torpedo tube- air tanks mounted on the roof.
Many railroads chose to rebuild their GP7s and GP9s for continued service. Often times, it was cheaper to do this rather than purchasing brand-new locomotives.
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
Blair Avenue Kit Part One 4 x 6inch
Turn the -wrong side of the tracks- into everyone s favorite part of town with this set of neat commercial structures. Based on actual buildings, the kit includes both the Photo Studio and Chinese Restaurant, with detailed castings that capture the look of the prototype s old stone and brick construction
For more detail on how to start and finish model go to downtowndeco .com TUTORIALS WITH RANDY HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
HO NSC 60ft Ingot Flat Car - RTAX Ebenezer Railcar Services
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
HO 55Ft Evans 4780 Covered Hopper - ADM (UELX) #60120
Product Information
Expand grain traffic along your HO railroad with a fleet of WalthersProto 55ft Evans 4780 Covered Hoppers! Introduced in 1977 and still going strong today, they can be found handling all types of grains and dried distillers grains used for animal feed. Fully assembled and ready for service, features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint and lettering
Ultra-smooth rolling 36inch RP-25 turned wheelsets
Proto MAX(TM) metal knuckle couplers
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16118
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale 48Ft Ribbed Side Container - Genstar
(White & Blue)
Product Information
Modernize your HO intermodal operations in minutes with these SceneMaster Containers, featuring:
Improved door latch detail
Great detail for terminals and industrial scenes
Realistic loads for any well car
Ready to use
HO Scenic Accents - Train Personnel (8pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
Three Porters heft baggage while another stands empty-handed. The conductor checks his pocket watch and the Captain seems to be yelling, All aboard!
HO 68Ft Bulkhead Flatcar - TTX #804299
Features:
Side stake pockets
Simulated tie-loops
Fishbelly center-sill
Prototypical pull-plates and lift rings
HO EMD SD7 - DCC & Sound - Bessemer & Lake Erie #455
Bessemer & Lake Erie
- Unique -B&LE- style sand fill door hatches
- Long hood forward operation
- Extra large pilot step and corresponding additional stepwell step (First time done on a plastic model!)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Fuel Stains Enamel Paint - 35ml Bottle
Enamel type effect for modelling
The definitive mixture to make fuel spilled effects in any type of modern or classic vehicle. This is not product to make oil and grease effects. This product is good mainly to make fuel spilled effects only with a great realism. This product is enamel and it can be blended with the rest of our colors and it is diluted with our White Spirit.
HO 4650 Centerflow Hopper - Farmland (CO-OP) #3433
Features:
Etched metal roof walks
Detailed brake gear
Blackened metal wheels
Accurate painting and printing
100-ton roller-bearing trucks and body mounted AccuMate couplers with screw-attached coupler pockets.
AccuMate couplers are made under license from AccuRail, Inc.
HO 37ft General American Meat Reefer - Union Refrigerator Transit (URTX) #63080
Rapidos 37ft Meat Reefers Feature:
- Complete underbody with all piping
- Super-detailed Barber S-1 trucks
- (Insulated turned blackened metal wheelsets)
- Accurate roof hatches and hardware
- See-through brake platforms
- Separate grabs, ladders and roofwalk
- Accurate paint schemes
- Multiple car numbers per scheme
- Factory-installed Macdonald-Cartier couplers
- Available in singles or multi-packs.
HO Greenville 86Ft Double Plug Door Box Car - Canadian National (Delivery 10-1978) #795115
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Canadian National (CN) -Delivery 10-1978- is our first Greenville 86Ft auto parts offering in Canadian National. The CN rostered a few orders of Greenville cars, but this order for 80 cars in 1978 was the largest. The 1978 cars have body-mounted brake gear and End-of-Car Cushioning components, along with that signature 5-grab iron body that makes them stand out from any other style of 86Ft Greenville box car. Some of these cars have lasted in their original CNA brown delivery scheme for a long time - we can verify an example to at least 2016! We know this scheme is a big deal - and we thank our CN fans for their patience. We wanted to release it with the correct body grab iron details.
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200075
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
N Scale Horizon Fleet Dinette - Amtrak Phase III Wide #53504
Super-detailed, as is Tradition
Rapido brings their experience with passenger car models to this long warranted fleet of cars used for intercity travel across America (and even into Canada). The Rapido cars will feature the same great attention to detail youve come to expect, including free-rolling wheels, detailed underbodies, interior lighting and more.
Coach, Dinette and Club Dinette cars available
Full underbody details unique to each car style
Full multi-color interior detail with separate seats
Folding steps or fixed stairs as appropriate
GSI G70 trucks with free-rolling, turned-metal wheelsets
Accurate painting and lettering
Constant interior lighting in DC and DCC
Working marker lights
Separately-applied metal grab irons
PM42 Breakout Board
The Accu-Lites PM42 Breakout Board is set up to accept up to two inputs and four distinct outputs. Each output can be configured with jumpers to make it a reversing section. The board comes with one set of jumpers that allows you to set that particular section to reversing, assuming the correct OpSwitches have been set inside the PM42s memory.
ESU 50341 Speaker set, Single 11x15mm, Modular Soundbox kit for 20mm, 23mm, 16x25mm
With our new modular speaker baffle set suitable for a single miniature speaker you can easily assemble your tailormade speaker baffle for two miniature speakers. Both – diameter and height – can be individually adapted to suit your needs. Even with one speaker the audio pressure is considerably better than with one circular speaker intended for these dimensions.
The popular sugar cube speaker 11x15mm and 8 Ohm impedance is supplied with a sealed mounting plate. First select one of the three base frames subject to the type of speaker you want to assemble, namely a circular frame with either 20mm or 23mm diameter or a rectangular type with 16x25mm. After you have inserted the speaker into the base frame you may now determine the height of the speaker baffle. The minimum height is 6mm, which can be raised to 8mm, 9mm, 10mm, 11mm or 13mm by adding up to three intermediate frames. The set contains two 2mm high and one 3mm high intermediate frame. They can easily be fixed with some glue suitable for plastic materials.
The higher the speaker baffle, the better the bass fidelity. It certainly pays off to utilize the entire space available.
Morgan Olson Route Star Van - Central Beverage Distributors
Modernize HO highways in minutes with these new Morgan Olson(R) Route Star Van replicas! Based on the popular delivery vehicles seen from coast-to-cast, these layout-ready models include a wide range of details and colorful printed graphics. Check out these other great features:
Newly tooled officially licensed replica!
Contemporary delivery vans and food truck versions!
Five authentic body styles with correct rear doors
Prototypes seen all across North America serving small businesses & fleet operators
Fully assembled
Full-color graphics
Detailed driving compartment w/interior bulkhead
N Scale 53Ft Containers - HUB (Union Pacific) Set #1 (3 pkg)
Road Numbers: 249228, 249249, 249360
FEATURES:
Side corrugations with an 8-55-8 arrangement
Front wall with 10 vertical corrugations
Roof with 6-54-6 corrugations
1-3-1 beveled doors
Placard holders on front wall, sides and door
Each set comes as a 3-pack w/different road numbers
HO Modern Brake Wheels for Freight Cars (8/pkg)
Delivery Van - Bel Aire Flowers
Expected Delivery: March 2020
At the curb or on the job, add color and variety to your HO vehicle fleet with SceneMaster Service and Delivery Vans!
Based on contemporary designs used by all kinds of businesses big and small, youll also find them in the ranks of the fire and rescue service.
Factory painted and printed in full color, the finished models look great on layouts and in collections.
Highly detailed, perfect for layout or collection
Each also includes modeler-applied side mirrors for more realism.
BSI-161 Un-Cure CA remover 1 Oz
HO EMD SW9 - DC/ Silent - New York Central (NYC As Delivered) #8925
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO RTR 60Ft Flatcar - Burlington Northern BN #630843
MODEL FEATURES:
Working drop ends. Gently lift up & push inward to fold ends down.
Separately applied wire grab irons
Interior detailing
Decorated models fully-assembled and ready to run out of the box
Machined metal wheels and RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Minimum radius: 18inch
HO Kansas City-Style Post-War PCC Streetcar - DCC & Sound - SEPTA (Ex-Toronto) #2246
Maroon/Cream
Sign: 60 Richmond Westmoreland
HO EMD GP9 Phase II with Chopped Nose - Standard DC/DCC Ready - Canadian National #4002
Product Information
WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they are nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features:
One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present
Limited edition - one time run of these roadnumbers!
Scale width hood with correct contours
See-through steps
Same powerful drive as WalthersProto(R) locos featuring:
Five-pole skew-wound motor
14 to 1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Machined brass flywheel
Heavy die-cast metal chassis
Constant and directional LED headlights
21-pin DCC plug
Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately)
Built-&-Ready Landmark Structures - Drive-n-Dine
Assembled - 7-3/4 x 5-1/4 inches (19.7 x 13.3cm)
Drive in to this beauty and you will be transported back in time! The little diner features a huge ice cream cone on its roof, soda straw supports for the awning, two carhops, bikes, benches, a spilled trashcan and a lamppost. Includes wiring for interior light.
N Scale Common Standard Low Switch Stands - Kit (4pk)
HO RTR 68Ft Bulkhead Flatcar - Canadian National CN #622378
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
HO NSC Ballast Hopper - Amtrak #11616
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO ACF 3-Bay Cylindrical Hopper - Potacan #743
PROTOTYPE INFORMATION:
Introduced in 1961 by ACF to haul sand, clay, salt, grain and bulk plastics, the Cylindrical Hopper was the first commercially successful
tank-type covered hopper car design. A few of the more than 4,000 cars of this type built through 1966 can still be seen in service today across the United States.
MASTER MODEL FEATURES:
See-through roof walks
Blackened metal wheels
Free-rolling 100-ton trucks
Detailed brake gear
AccuMate couplers
Fine painting and printing
HO NSC 3800 Covered Hopper - TH&B (Delivery Scheme) #1520
They are back, again! The famous Rapido 3800 cu.ft. Cylindrical Hoppers make a triumphant ~THIRD~ return with new road numbers and paint schemes!
FEATURES INCLUDE:
- Round-hatch or Trough-hatch design
- Correct Dofasco S-2 100-ton trucks
- Two body variations with 6- or 11-side panels
- Three brake equipment variations and optional additional air reservoir on NSC cars (if applicable)
- Etched running boards and brake crossover platform
- Factory-installed air pipes and coupler cut levers
- Finely molded plastic walkway supports and end cages
- Full separate air piping and brake equipment details
SD45-2 - DCC/Sound - CSX (Solid Grey) #8951
Detailed Information
NEW FEATURES:
•All-new LED lighting
•Rubber MU hoses for durability
•Models equipped with DCC+Sound will have the new 645E3 20-cylinder prime mover recording by SoundTraxx
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; we are excited to include new features often requested, to the SD45-2 and upcoming Genesis models.
CSX FEATURES:
•EMD large style snow plow
•Firecracker antenna
•Leslie RS5L horn air horn
•Nose mounted headlight
•Small anticlimber
•Chickenwire radiator grilles
LOCOMOTIVE FEATURES:
•Safety tread on walkways
•Fine-scale handrails for scale appearance
•Factory applied wire grab irons
•Windshield wipers
•See through cab windows
•Detailed and painted cab interior
•Sliding side cab windows
•Metal lift rings
•Fully-assembled and ready-to-run
•DCC-ready features Quick Plug plug-and-play technology with a 21-pin NEM connector
•Scaled from prototype resources including drawings, photographs, and more
•Accurately painted and printed paint schemes
•Body mounted McHenry operating scale knuckle couplers
•Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
•All-wheel drive with precision gears for smooth and quiet operation
•All-wheel electrical pickup provides reliable current flow
•Wheels with RP25 contours operate on all popular brands of track
•New LEDs for trouble free operation
•Bi-directional constant lighting so headlight brightness remains constant
•Heavy die-cast frame for greater traction and more pulling power
•Packaging securely holds for the model for safe storage
•Minimum radius: 18in
•Recommended radius: 22in
SOUND EQUIPPED MODELS ALSO FEATURE:
•Onboard DCC decoder with SoundTraxx Tsunami2
•Sound units operate in both DC and DCC
•Some functions are limited in DC
•Engine, horn, and bell sounds work in DC
•All functions NMRA compatible in DCC mode
•Slow speed control
•Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
•Many functions can be altered via Configuration Value (CV) changes
•CV chart included in operators manual
PROTOTYPE INFO:
The SD45-2 was an initial success; it was a complete improvement or upgrade as part of EMDs Dash 2 line; it had little to almost absolutely no flaws during the early stages of production and during the models official introduction. It was both popular and compatible with the original SD45 as well, with its large 20-cylinder engine. The SD45-2 lasted somewhat longer than most SD45 units on various owners rosters.
HO ACF 5250 4-Bay Covered Hopper - ARCO Polymers (NDYX) #83
Features:
Ready to run
Injection molded plastic
Fine scale detail
Etched metal roof walk
Metal knuckle couplers
Road specific hatch and outlet configurations
Road specific roof walk variations
Three body style variations
Separately applied wire grab irons and wire brake lines
Crisp painting/printing
Free-rolling 100-ton trucks
HO Scenic Accents - Wildlife Standoff (6pcs)
A feisty trophy-buck fends off three wolves while the fourth howls for reinforcements!
HO NSC Ballast Hopper - BC Rail (Late) #2872
1990+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO GP38 Gold - DCC Sound - FURX #5525
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate? knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
AccuMate? couplers are made under license from AccuRail, Inc.
Sound Features for Gold Series :
(DCC Operation)
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F31 .
Follows all NMRA DCC standards and recommended practices
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes ?on the fly? are provided for true realism
1/16In Fluorescent Green Rod (10pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic.
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
GREEN
HEIGHT IN INCHES
1/16In
HEIGHT IN MM
1.6mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
Manchester Liners/Modern Container Ship - Unpainted and Resin Cast
FEATURES:
- White Polyurethane Resin Kit
- Unique One Piece Castings for Easy Assembly
- Built at Gijon, Spain 1971
- Scrapped at Aliaga, Turkey 2002
- Typical Short Sea Container Ship
- Measures 39-3/8 Inches Long When Complete
- All Deck Fittings Included
- Waterline Model
- Era: Suitable for 1960s to Present
- Full Color Instructions
- Decals Included
Tangent Scale Models HO PS4750 Covered Hopper - KCS - Delivery Brown
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
KCS -Delivery Brown 12-1979- The KCS scheme is simple and eye-catching, with the tall KCS reporting marks, white circle delineators and brown matching trucks. The center sill correctly models the brake linkage access holes on one side of the car, just like the real ones. This is a big scheme, and we know our KCS customers have been a patient group. Our KCS terra cotta colored masterpieces accurately depict their Pullman-Standard prototypes.
Acrylic Flat Colors - Flat Green - 3/4oz (23mL) Bottle
XF-5
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO SD40T-2 - DCC & Sound - D&RGW (Rio Grande) #5405
ETA: May 2023
Detailed Information
DRGW FEATURES:
88inch nose with brake wheel
Large Sinclair antenna
Relocated P3 horn
Tall front ditch lights
Stratolight Beacon
Small EMD plow
Extended range dynamic brakes
The 1990s was an interesting time for some railroads. An example of this would be SP-era Rio Grande SD40T-2s. SP has always been known for having a plethora of lights on their diesels. During this period, Stratolight beacons and front ditch lights were added to many DRGW locomotives. With the combination of the factory installed nose Mars lights, these were affectionately nicknamed as -xmas tree- lights by some railfans.
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Photo-etched windshield wipers
Separately applied air tanks
LED Lighting
HTC truck sideframes
Welded ECAFB
All-wheel electrical pickup
See-through dynamic brake fans
Separately applied wire grab irons
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox specific for the tunnel motor
Speed recorder attached to appropriate axle per prototype
McHenry operating scale knuckle couplers
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Fully assembled and ready-to-run
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO Sunflower Field - Kit (60pcs)
Add a splash of color to modern farm fields or gardens with the SceneMaster Sunflower Field kit! The HO model includes parts molded in colors to make 60 plants and complete instructions.
HO SD38 - DCC Ready - B&LE #867
BLE FEATURES:
Later large paper air filter box dynamic brakes, cab mounted gyra-light (upper light only), smaller fuel tank, ditch lights, no plow, rear brake wheel, extra jacking pads, yellow frame stripe, painted lower steps.
ROAD NUMBER SPECIFIC FEATURES:
#866
- Leslie 3 chime horn
- black painted left side walkway
- front and rear ditch lights
- battery danger decals
- modern loop style coupler cut lever
#867
- Leslie 3 chime horn
- front and rear ditch lights
- red coupler cut lever
#868
- Silver P3 horn and cab light housing
- Front ditch lights
- repainted nose and battery box effect
- faded lower steps effect
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Cotton Belt St. Louis South Western
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
4mm Static Grass - Summer Grass (20g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. Mixing various lengths and colours of grasses can produce highly realistic textures and effects.
HO ALCo RS-3 - DCC/Sound - Ontario Northland #1306
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO Greenville 86ft Double Plug Door Box Car - CB&Q #15023
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Release Date: August 2021
Chicago, Burlington, and Quincy (CB&Q) -Original 1-1969- is our first Greenville 86ft auto parts offering for any of the -Hill Lines.- CB&Q was the only Hill Line railroad to take delivery of auto parts cars, and this release represents the first of CB&Qs two orders of Greenville prototypes. Delivered in 1969 when the BN merger plan called for green car deliveries, these cars had their pre-merger paint scheme, complete with large -Burlington- lettering. For return route stenciling, these cars state -When Empty Return To GTW RR Pontiac MICH- on the side. For additional context for how far and wide these cars traveled, these cars served into Canada. The car side has one and a half inch stenciling stating -This Car Too High To Clear St. Clair Tunnel Port Huron Michigan.- This warning lettering varied from car to car, and we have duplicated this with car-number specific and car-side specific placement of St. Clair tunnel stenciling! The CB&Q cars feature 100-Ton -Low Profile- Barber S-2-C Roller Bearing Trucks, with 36inch wheels, complete with accurate Hyatt rotating caps. These models are ready to operate with four different road numbers!
PS-2 2003 2-Bay Covered Hopper - Denver & Rio Grande Western #18010
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
HO RTR 55 F-100 Panel Truck - Police/Black
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
HO PS4427 High Side Covered Hopper - CN (Ex-WC) (Conspicuity 2008+) #82114
Truck: Tangent 100-ton Barber S-2 trucks with rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36 Inch Wheels
Canadian National CN ex-WC Conspicuity 2008+ replicates a group of CN red cars for the modern era. The Wisconsin Central inherited its PS4427s in the form of ex-MILW cars at the 1987 startup of the railroad. WC PS4427s survived all this time, and many were repainted by CN at the former IC Centralia, IL car shop. (Recall that the CN took control of the WC in 2001.) These cars feature conspicuity striping on the sides and ends.
Each of the four car numbers is visually different, with photo-specific application of data, logo, conspicuity stripes and jacking pad details. The cars retain their ex-MILW build features, like solid end running board supports and center sill supports between the bays. The ends feature replacement style Morton crossover platforms and replacement smooth roof hatches.
HO Gold S-4 - DCC & Sound - Grand Trunk Western #8200
Features Include:
Newly tooled with improved cab design
5-pole skewed armature motor for reliable operation
Dual-flywheels for maximum performance at all speeds
Factory-equipped with AccuMate knuckle couplers
Exceptional painting and printing
Sturdy die-cast mainframe and gear cases
Atlas Master Series Gold Features:
ESU LokSound decoder, supporting all DCC programming modes.
Flexible mapping of function keys F0 to F31.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor and more.
HO Union X-3 Tankcar - Procor Limited #32978
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO Value Line RTR - 13 Panel Coalporter - Conrail #503075
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO 60ft Flat Car - OTTX/Brown Logo #97079
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO GE ES40DC - DCC & Sound - Norfolk Southern #75088
ETA: June 2023
Detailed Information
NS FEATURES:
K5HL horn
Electronic bell
High cab headlight
High mounted rear headlight
Large plow
Rear anticlimber
Alternating front and rear ditch lights (Function in DCC mode)
ROAD NUMBER SPECIFIC FEATURES:
#7500
As-Delivered paint scheme
#7508
As-Delivered paint scheme#7511
#7511
As-Delivered paint scheme#7561
#7561
Unique primer painted version
ES44 SERIES LOCOMOTIVE FEATURES:
Illuminated ditch lights
Tinted cab windows
Large antenna dome
GPS dome
Hand brake panel grille
Nathan K5HL horn
5000-gallon fuel tank
Low or high front headlight per prototype
See through dynamic brake intakes
Low or high front headlight per prototype
See through dynamic brake intakes
Short auxiliary cab rear left-side doors
Right side forward electrical cabinet with X-Panel
Engine compartment side grab irons (Non-CP Units only)
No engine compartment side grab irons (CP Units only)
Flush radiator compartment doors
Flush heat exchanger housing and top radiator grilles (Non-CP Units only)
Raised heat exchanger housing and top radiator grilles (CP Units only)
Dynamic brake exhaust vents spaced per prototype
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO RTR 40Ft Single-Door Steel Boxcar - Great Northern (Large Rocky Logo) #3897
(Big Sky Blue, white)
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. Check out the entire line of Bowser HO Scale ready-to-run boxcars.
HO Fruit/Food Crates - Large, Brown (4pk)
A variety of food product crates with colorful labels, including: Irish Beauty, Jims Sweet Potatoes, Washington Apples, Jo Jo Melons, Greenspot, American Maid Pears, Red Crown and Big Chief Tomatoes.
HO 13/32 inch Open Web Truss - Cellform Style (2pcs)
Use for roof trusses, space frames and other modern and/or futuristic steel structures. Precision Injection Molded in Styrene Plastic. Manufactured with a special tongue and groove connection feature to quickly and accurately attain the desired length.
SCALE
ALL
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
5/16
HEIGHT IN MM
7.9mm
WIDTH IN INCHES
13/32
WIDTH IN MM
10.3mm
THICKNESS IN INCHES
7/64
THICKNESSS IN MM
2.8mm
LENGTH IN INCHES
4-1/16
LENGTH IN MM
100mm
HO Bettendorf T-Section Self Centering Trucks - 33 Inch Ribbed Back HGC Wheels
HGC Two Piece Fully Equalized Trucks Features:
- Self Centering Action - Trucks self align themselves parallel with the car for easier placement on track.
- Code 110 (.110) #523 33 Inch Ribbed Back Wheels
- HGC Weighs nearly the same as Metal Trucks
- Superior Rolling Ability
- Clip on Brake Pads
- Accurate Markings
- Incredible Detail True to Prototype
- Non-Magnetic Metal Wheels
- Highly Flexible Fully Equalized Trucks
- Smooth tracking Free Rolling Contoured Insulated Plastic Axles
- RP-25 Free Rolling Wheels
- Patent number 7,434,518 B2
HO GMD SD40-2 - DCC & Sound - Wheeling & Lake Erie (ex BCR) #6358
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars,
operating headlight, window glass, road name specific details, roadname specific fuel tanks,
can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC,
DCC with Sound version features LokSound Select decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
Fine Red Sable Brush - Size 0
HO ICC B&O I-18 Steel Bay Window Caboose - Chessie System (B&O 1979+) #C-3039
Product: ICC B&O I-18 Steel Bay Window Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Gould Caboose Roller Bearing with separate brake beam part
Wheels: CNC-Machined 33inch Wheels
DC/DCC Lighting Features: Interior lights (Dim!), -Box- marker lamps and Red FRA flashing end light
Chessie System (B&O) -1979+- illustrates Chessie I-18s that have been modernized. Specifically, these 1973 Chessie DuBois paint jobs are being offered in their 1979 configuration. What does that mean for these models? First, the Pyle side markers have been replaced with the later era Chessie Box Markers. Gone is the underframe toilet pipe, replaced with the waste holding tank and chlorinator. FRA red flashers have been installed on the ends. And of course, we have duplicated the little lettering additions and changes along the way, like updated COTS panels. Each of these models is slightly different, as we duplicate the specific side and end lettering nuances of the prototype numbers. Lighting features include prototypically dim interior lights, lit box markers, and red flashing end lights. The FRA flashing red end light is worth noting - it has the correct flash rate and decay of the real thing. No -generic- LED flash here!
5/16 inch Open Web Truss - Pratt Style (2pcs)
Use for roof trusses, bridges, conveyors, space frames and other steel structures. Precision Injection Molded in Silver Styrene Plastic. Manufactured with detail on one side only. If structure will be visible from both sides, it may be desirable to cement two pieces back-to-back for realism.
SCALE
ALL
MATERIAL
STYRENE
COLOR
SILVER
HEIGHT IN INCHES
5/16
HEIGHT IN MM
7.9mm
WIDTH IN INCHES
1/4
WIDTH IN MM
6.4mm
THICKNESS IN INCHES
.040
THICKNESSS IN MM
1.0mm
LENGTH IN INCHES
4
LENGTH IN MM
100mm
40Ft Corrugated Container NYK Logistics 2pk
NYKU #812286(9) , NYRU #824354(1)
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OAKX #14
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO2/HO3 Knurled Brass Roller for Tracking Cleaning Car
HO Scale GP38 - DC/DCC Ready - Norfolk Southern (High Nose w/ Ditch Lights) #2768
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
N Scale Concrete Slab Double-Oval Track Set - V17 (4.8 x 2.8ft)
Setup Dimensions:
4ft 9-5/8 x 2ft 9-5/8 inches (146.3 x 85.3cm)
HO 85ft ACF Dome Lounge Coach w/lights - Union Pacific (Walter Dean) #9005
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
As UP transformed its Streamliners into Domeliners in 1955, 15 new Dome-Lounge Observations were delivered to bring up the rear of the flagship streamliners. Within a year however this proved to be a problem. The cars quickly lost their unique ends and were rebuilt as Dome-Lounges. Named for the famed UP-SP-CNW Streamliner, the prototype has its original windows and lighting for use at the end of the train.
HO Andrews (1898) Trucks w/33in Ribbed Back Wheels - Metal Fully Sprung (1pair)
Mounts with a #2 or 2-56 screw.
Mounting Screws not Included.
The Andrews truck is also a turn of the century design that was long lived. It represents one of the first steps in the development of the modern freight truck with its cast frame. The journal boxes are bolted to the main frame. This truck was used through the end of the 1950s although by that time was only used in lighter applications such as refrigerator cars. Andrews trucks are probably still used were logging railroads remain in operation.
Metal Fully Sprung Trucks Features:
Code 110 (.110) #523 33in Ribbed Back Wheels
Accurate Markings
Incredible Detail True to Prototype
Non-Magnetic Metal Wheels
Highly Flexible Sprung Trucks
Metal Sideframes & Fully Sprung Bolster
Smooth tracking Free Rolling Contoured Insulated Plastic Axles
RP-25 Free Rolling Wheels
#637 HO Scale Truck Springs
Patent number 5,768,999
Package Includes:
(2) Each #509 Andrews (1898) Trucks (assembled)
HO Safety Striping - Assorted styles - 5 and 3 inch Heights - Waterslide Decals
HO AutoScenes - Fritzs Front Loader
These three guys are ready to do some heavy lifting around your layout with their equipment!
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
N Scenic Accent Figures - Yorkshire Pigs (12pcs)
Yorkshire oinkers includes sows, feeders, and piglets!
HO Numberboards Diesel - Lightable - Decals
Clear Numbers on Black Background
Circa: 1940s-90s
Scale: HO Scale
Equipment Type: Diesel - Lightable
Description: Numberboards Diesel - Lightable - Waterslide Decal - HO Scale
PS-2 2003 2-Bay Covered Hopper - MILW (4-pack)
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
HO Scale H1a Hudson Steam - DCC & Sound - Canadian Pacific (Delivery) #2803
-Early walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
Tsunami2 Digital Sound Decoder - 21-Pin NEM form factor - Assorted Locomotives
Will work for a variety of locomotives.
Dimensions: 30.5 x 15.5 x 6.5mm
Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output)
Function Outputs: 8
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
The NEW TSU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more!
The TSU-21PNEM8 can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches.
HO FM H16-44, With Sound & DCC, Canadian National: Wet Noodle Scheme No.2202
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
All Scale Realistic Trees Kits - Green Deciduous Medium Green - 3/4 - 3inch Tall pkg(21)
Six selections of tree kits in deciduous or conifer styles ranging in size from 3/4inch to 8inch give you the opportunity to make easy and truly unique trees for your layout. Create the armature shape you want then add as much or as little foliage as desired. Easy for beginners.
HO MLW M420 A/B Set - DC/DCC Ready - British Columbia (Lightning Stripe) #645, 688
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO NSC 64 Ft 6000 Cubic Gondola HS - MWCX #102858
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO RTR ACF 2970 Covered Hopper - Norfolk and Western #180402
Detailed Information
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons and stirrup steps
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple road numbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
W&LE #78007
MODEL FEATURES:
Wire and plastic handrails, stirrup steps, ladders and underbody details
Separately applied brake gear including brake wheel, air reservoir, and brake cylinder
Bettendorf or roller bearing trucks with 33In machined metal wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers
Painted and printed for realistic decoration
Weighted for trouble-free operation
Interior plastic blister safely holds the model for convenient storage
Window packaging for easy viewing
Fully assembled
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
The development of the hopper car went along with the development of automated handling of such commodities, with automated loading and unloading facilities.
Open hopper cars are used for commodities such as coal, which can suffer exposure with less detrimental effect. Hopper cars have been used by railways worldwide whenever automated cargo handling has been desired.
PSC Transfer Van - Canadian National #76678
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20016
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Bi-Level Auto Racks - Providence & Worcester #190062
All are Ready-to-Run.
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene-
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage.
HO Greenville 86Ft Double Plug Door Box Car - CSXT (Boxcar Scheme 2019+) #180651
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
CSXT -Boxcar Scheme 2019+- throws a -modern era- repaint into this release mix. This Tangent model replicates the most modern incarnation of the CSXT scheme we have found yet applied to Greenville 86Ft boxcars, starting in 2019. For those keeping score, this is a former Chessie C&O 1978 car, with its 5-grab body style and body mounted brake hardware. The times, they are a-changin, and this car has an updated appearance for 2019-2020+ layouts. Notice the lack of a COTS panel on the paint job, vertical conspicuity striping, the correct placement of the large tackboard near the reporting marks, and the modification of the -third arm- layout on the left hand door. Those yellow-painted grab irons look classy! We even threw in the tiny one-inch 2020 Door inspection data patch, so we apologize to the 2019 guys for technically bumping the era forward one year. This car is ready to roll behind those CSX GEs.
HO 1955 Chevy Cameo Pickup - Red, Ivory
This pickup is perfect for North American street and highway scenes. This detailed truck features a die cast metal body, interior seats, window glazing and authentic decoration. Perfect for rural scenes or carting loads around town, this truck is a great addition to any 1950s or later layout scene.
1 Inch Wide Sanding Stick
2.54cm Wide Cloth, 120 Grit Abrasive Strip
HO 36ft Chemical Tank Car - Vulcan Chemical/GATX #33776
FEATURES:
- One-time run of these road numbers, order now, limited quantity available!
- Newly tooled tank with bolted jacket
- Perfect for steam- and diesel-era freight service
- Prototypes carried all types of chemicals between producers and end-users
- Small chemical/pressure dome
- See-through platform
- Correct 33 inch turned metal RP-25 wheelsets
- Proto MAX(TM) metal knuckle couplers
Bells for Diesel Locos (Brass Castings) - Hood/Switcher Unit Style in Bracket
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.08 (10pcs pkg)
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
Tru Color Paint 158 - Acrylic -CP Rail Gray 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Code 100 Streamline Large Radius, Electrofrog
Nominal radius 1524mm, angle 12 degrees, length 258mm
HO Figures - Pigs (9)
Populate your layout with miniature figures from all walks of life!
HO Stock Yard - 2 Pens - Kit
Product Information
Cattle and livestock were important traffic on every U.S. and Canadian railroad from the steam era into the 1960s and the Walthers Cornerstone Stock Pens kit makes it easy to bring this traffic to your HO Scale railroad. Federal laws mandated that animals be rested and fed en route, so stock pens like this could be found in yards as well as near small towns and at remote sidings along the mainline. Huge stockyards, covering several acres, could be found in big cities, and packing plants needed pens to hold livestock. With its modular design, this kit builds everything from a small town loading stock pen to a big city stockyard. The kit includes detailed parts for two realistic pens with loading chutes aligned to the doors on coupled 40ft stock cars, plus a lean-to for shelter or feeding.
Realistic stock pen kit
Parts for two pens
Feeding lean-to structure
Loading chutes align to the doors on coupled 40ft stock cars
Great for steam or early diesel-era layouts
Molded in appropriate colors
HO & N Scale Operating Ground Throw - Sprung 0.165 inch Travel w/Selectable End Fittings
Sprung ground throws are designed to be connected directly to the turnout taking advantage of the internal stainless steel springs. Sprung ground throws are designed to be connected directly to the turnout taking advantage of the internal stainless steel springs. A shim to raise the stand to tie level and five different end fittings to connect to most turnouts are provided: hook end for Atlas, blade for Roco, hole for PECO, small round pin for Micro Engineering and round pin for Shinohara and others.
HO GATC 4500 Covered Hopper - CRDX/ADM #4880
(ADM Blue Lease 9-1966)
- Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
- CNC-Machined 36 Inch Wheels
CRDX ADM Blue Lease 9-1966 is one of those schemes that defines the word sharp. ADM leased these cars from Chicago Freight Car Leasing Company (CRDX) and they were painted in a wonderful ADM dark blue with white graphics. These models duplicate the CRDX prototypes with Morton roof walkways and body mounted brake gear. Look closely at the bays, and you will notice the distinctive Wine Combo style outlet gates that allowed for either normal gravity unloading or low pressure air-assisted pneumatic unloading depending on the commodity. The B-end features an accurate Morton brake step and Ajax power brake. The low retainer valve is mounted near the air reservoir, just like the prototype. The black 100-ton Barber S-2 trucks have accurate rotating Timken bearing caps!
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Orange) #506992
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
HO Lasercut Graffiti Decals Mega Set - Set #9 pkg(9)
9 Design -Tags-
All of our graffiti decal sets are now lasercut. What this means is you no longer will have to trim the decal close. You only have to cut a couple of small tabs and soak the sheet in water. The trimming has been done for you by our laser cutter! As an added bonus the decals are printed on white decal paper making them more opaque.
Love it or hate it, graffiti is everywhere. We do not condone painting graffiti on real railroad cars, buildings, bridges, etc. and it is against the law. But defacing your model railroad with Blair Lines Graffiti Decals is fun and still legal as far as we know! All decals are reproductions of graffiti found on real railroad cars. Decals are not shown actual size.
N Scale 3230 Covered Hopper - CIT Group (CBFX) #440522
Features:
- All new tooling
- Ready to run
- Injection molded plastic
- Fine scale detail
- Etched metal roofwalks
- Crisp painting and printing
- Magnetic couplers
- Metal wheelsets
The Trinity 3230 Pressure Differential (PD) covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
HO EMD GP40 Mother and Slug - DCC Ready - Union Pacific #3000, S-300
1997+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Slug is fully powered! Motor tucked into frame and body
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Peel n Place Tufts - Medium Green Prairie Grass
The Woodland Scenics Peel n Place Tufts allow you to model a variety of grassy plants often found in fields, meadows and pastures. Available in several styles of grasses and flowers, these tufts are ready-made and can be used right out of the package. Simply peel the tufts from the tray and place them where desired. Combine Peel n Place Tufts with other Woodland Scenics scenery materials to enhance your layout.
N Scale Shipping Warehouse Flat - Kit
The old Comet Manufacturing kit has been revamped into a background flat perfect for a long string of cars. This hydrocal kit has great brick detail, a new set of signs, easy-to-install printed windows and complete painting and aging instructions.
Atlas - N Scale GP-7 PH 1- Gold DCC Sound - New York Central #5608
Features:
Powered low friction drive
Blackened metal wheels
Dual brass flywheels
Directional lighting
Golden-white LEDs
AccuMate couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
AccuMate couplers are made under license from AccuRail, Inc
HO 60ft Hi-Cube Plate F Boxcar - Union Pacific #961496
Bring your freight car fleet up to date in minutes with the Walthers Mainline(R) 60ft Hi-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft Hi-Cube Plate F Boxcar include:
-Limited edition - one time run of these roadnumbers
-Prototypes now in service with TTX and several railroads
-Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
-Prototypically correct roof with both X and diagonal panels
-Separately applied latch bars
-Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
-100-ton roller bearing trucks
-36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers