HO 30Ft Single-Track Railroad Through Girder Bridge - Low Level Kit
Product Information
This authentic Walthers Cornerstone Low-Level 30Ft Single-Track Railroad Deck Girder Bridge is typical of bridges used for decades on lines large and small. Railroad deck girder bridges are used in all kinds of arrangements across the continent. Use this kit as a stand-alone bridge supported by Cornerstone Engineered Bridge System bridge abutments or as part of a larger viaduct with piers, Steel Railroad Bridge Towers or Bridge Tower Bents. Once in place, add WalthersTrack Code 83 Bridge Track 948-83004 or other trackage of your choice (each sold separately). Kit parts come molded in dark gray plastic and feature simulated steel construction.
As shown the low-Level 30Ft Single-Track Railroad Deck Girder Bridge measures: 4-1/8 x 1-3/8 x 1-1/8inch (10.4 x 3.4 x 2.8cm)
Part of the Cornerstone Engineered Bridge System
One of the most popular railroad bridge designs with unlimited overhead and side clearance for passing trains
Fits steam, diesel and modern-eras
Available in four common lengths to match prototype practice
Build with open or ballasted deck
Perfect as approach spans for bigger Cornerstone and other bridge kits
Add to new or existing scenery with Single-Track Center Piers (933-4550) and Abutments (933-4551) available separately
Use with WalthersTrack Code 83 Bridge Track (948-83004 sold separately) plus flexible, sectional and hand-laid track or your own rail
Detailed plastic parts molded in dark gray
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - DEAX #11344
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .030In x 6In x 12In (2 pcs pkg)
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - JAMX #2007
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 4-6-6-4 Steam Challenger - DCC & Sound - Union Pacific (TTG) #3997
Detailed Information
Union Pacific
In the spring of 1941 UP locomotive designers began working on a locomotive to team up with the new 4-8-8-4 Big Boys then under construction at Alco. The Big Boys were designed to pull heavy freights up the Wasatch Range in Utah to the division point at Green River, WY. What was needed was a locomotive to take over at that point that could speed the freights eastward across the Wyoming Division. Building on their experience with the original CSA 4-6-6-4 Challengers UP and Alcos designers developed a newer and better Challenger type locomotive. The result was a group of 65 4-6-6-4 Challenger built in three separate groups during World War II.
ROAD NUMBER SPECIFIC FEATURES:
#3985
Modern Excursion version
Oil Burner
Era 1980s - 2000s
#3933
Coal Burner
Dual smoke stack
Tender bunker coal extensions
Era 1940s - 1959
#3967
Coal Burner
Dual smoke stack
Smoke Lifters
Era 1940s - 1959
#3997
Coal Burner
Dual smoke stack
Tender bunker coal extensions
Era 1940s - 1959
UP painted several of their Challengers in their two-tone grey paint scheme for passenger service. They also added smoke lifters and converted many to oil burners as well.
ROAD NUMBER SPECIFIC FEATURES:
#3976
Two-tone grey w/ yellow lettering and striping. Oil burner
Dual smoke stack. Era: Late 1940s - Mid-1950s.
STEAM LOCOMOTIVE FEATURES:
Illuminated number boards and headlights
Headlight turns off in reverse
Illuminated directional back-up light in the tender
Correctly operating eccentric cranks
Adjustable top cab vent and cab windows
Pivoting front and rear engines for negotiating 18inch radius curves
Current pick-up on all driver and wheels
Boiler backhead with full details and printed gauges
Synchronized chuff, whistle, bell, blow-down, air compressor, dyno and pop-off valve sounds
User-controlled whistle, short whistle, bell, squeal, coupler crash, injector, water stop and light dimmer
Individually-applied detail parts, including brass-painted bell and whistle, piping, valves, generator, steps, air pump, air tanks, reverser and coupler lift bar
Front coupler pocket can be inserted to mount operating coupler
Minimum recommended radius: 22inch
NEW FEATURES:
Dual cube speakers for great sound quality
Lighted firebox flicker effect with see-through firebox door
Upgraded headlight lighting with brighter LED
Improved loco-to-tender connection harness for increased durability and serviceability
SOUND EQUIPPED MODELS ALSO FEATURE
Tender-mounted DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, whistle, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Scale Santa Fe Refrigerator Car -El Capitan #34853
RR27 CLM
HO ALCo RS-3 - DCC/Sound - CP (Script) #8441
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
Wire Harness, 18-pin (Next18) Socket to Open Wires w/Heat Shrink Tube
HO 40Ft Standard Height Container - Ocean Network Express ONE (TLLU) Set #2
FEATURES:
40Ft based on corrugated design with logo panels
All containers feature opening doors
Accurate painting and lettering
3 pieces per set
VW Panel Van Red/Orange 1:43 Scale
HO Rollerskaters & Skateboarders (6)
HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) #743816
1935+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO Union X-3 Tankcar - Atlantic Refining #32652
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO SD70M - DCC Ready - Lake State Railway LSRC #6431
Detailed Information
LSRC FEATURES:
Ex-UP
Small EMD front plow
Round front deck mounted ditch lights
PTC antenna array
Late EMD trucks with exposed bearings
The Lake State Railway operates 375 miles of track and is based out of Saginaw, Michigan. They recently purchased a small batch of Ex-UP SD70Ms painted into their bright new livery. The 2 numbers we are offering were the first to be repainted and often ran together in consist.
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO FMC 60ft DD/SS Hi-Cube Boxcar - Norfolk Southern #620027
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
MODEL FEATURES:
- Double 8 foot Youngstown doors
- Photo-etched coupler cross-over platform
- Separately applied grab irons, end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for trouble-free operation
- Body-mounted McHenry operating scale knuckle couplers
- 70 or -100 ton roller bearing trucks with 33 or 36 inch wheels per prototype
- Machined metal wheels with RP25 contours
- Minimum radius: 18 inches
N Scale Single-Track Curved Viaduct - R249-45 (R 9-13/16in-45)(2/pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO EMD SD7 - DCC & Sound - Southern Pacific (Orange Lettering/ Black Widow) #5318
Southern Pacific
- Steam generator equipment details on short hood
- Correct Mars style -ash can- light on both ends of the locomotive
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Sylvan Scale Models HO DP-0062 Etched Brass CPR Caboose Steps/Ladder
HO Brake Vent Valve - Regulator pkg(2)
CNR Scale Test Car - Unpainted and Resin Cast Kit
HO EMD SW9 - DC/ Silent - Canadian Pacific (CP Block Scheme) #7405
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Canadian Pacific:
Delivered in 1953 / GMDD
Short side handrails
Small number boards next to the headlight
Large barrel style headlight
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
Atlas HO 20004688 45Ft Matson Corrugated Containter 3 pk
HO 53ft Railgon Gondola - Canadian National #188235
Product Information
A must-have model for any HO layout from the 1980s to the present, the WalthersMainline 53Ft Railgon Gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53Ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
A great addition to your HO freight car fleet, the models feature:
One time run of these roadnumbers, order now - limited quantity available
Based on Railgon 310000 series cars
Used in nationwide pool service from 1980 to the present - many later leased and relettered by new operators
Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
100-ton roller-bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Greenville 86Ft Double Plug Door Box Car - C&O/Chessie (Delivery 10-1977) #493122
- Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
- CNC-Machined 36 Inch Wheels
Chessie System (C&O) Delivery 1978 is our first Chessie C&O offering in the Greenville world and of course we had to make a big splash with this scheme. This C&O order is huge ? 275 cars were delivered in October and November of 1977. They feature the late Greenville phase details with 5 grab irons at the left and right corners of the body. With that fantastic Chessie C&O blue, white excess height end painting, and galvanized silver roofs, they are sure to stand out on your layout. The cars include exact and accurate Chessie C&O data, as applied by Greenville, including metric units! This model features body-mounted brake rods, Gypsum-style crossover platforms and 100-Ton Low Profile Barber S-2-C Roller Bearing Trucks with accurate rotating Timken caps. This is a big and prototypically-relevant series of cars. SKUs -01 through -06 have October 1977 build data and SKUs -07 through -12 have November 1977 build data. Chessie fans, who loves you?!
Rail Pal(TM) 2-Sided Pad Rescue (Heavy Cleaning)/Maintenance (Cleaning)
for HO Scale, N Scale, O Scale Tracks
Handy for quick fixes. One side is a Rescue Pad, the other a Maintenance Pad.
Remove build-ups and oxidation
Smooth burrs and track imperfections
Improve track conductivity
Ballast - Medium Gray - Shaker (57.7 in3)
Use ballast and coal for any scale to model realistic railroad track, gravel roads, crushed rock and stones, hopper loads, and coal piles. Available in several colors and sizes, you can mix and match for a superior realistic effect. Ballast and coal are lightweight and easy to use. Watch the Woodland Scenics video about how to apply it and attach with scenic cement!
ALLERGY CAUTION: Ballast contains tree nut by-products.
HO ALCo RS-3, Phase 3 - DCC/Sound - Burlington Northern #4082
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- fuel tank
- can motor
- flywheels
- blackened wheels with RP25 flanges and knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound V5 decoder
HO SP C-40-3 Steel Cupola Caboose - Southern Pacific (Serif with NO Underline) #1232
1953+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
HO 85ft General American G85 Flatcar - TTX (Brown) #300086
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
N Scale Pullman-Standard 5277 Cubic Foot Boxcar - Canadian National - #419214
Date: LRC 10-93
Dark Green
Models tree foliage for medium to large trees and low-to-medium ground covers, such as bushes, trees and shrubs. Use for any scale, colorfast and blends with other foliage.
Available in six realistic colors and great for making small trees too! Each package includes 32 oz volume of material. Underbrush works well for medium ground cover or undergrowth. It blends with our Foliage, Field Grass and Turf products.
1. Apply Scenic Glue (S190) to layout.
2. Press Underbrush into glue and allow to dry.
HO GP38 Silver - DCC Ready - CENTRAL MAINE & QUEBEC RAILWAY #3812
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers,metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional features include:
Etched metal radiator and dynamic brake fans (included where appropriate per road name).
Dynamic Brake options: standard range, extended range or non-dynamic brake hatch used where appropriate per road name.
Three fuel tank variations: 2,600, 3,000 and 3,600 gallon used where appropriate per road name
Atlas Master Series Silver Additional Features:
NMRA 21-pin plug for DCC (Decoder-ready)
Silver Sound Ready
Atlas Silver Sound Ready models are equipped with a speaker for easy conversion to sound with
the addition of a decoder.
EP-5 Electric Loco - DCC & Sound - New Haven, Delivery #377
Detail Variations:
No Vents
HO Model Features:
Accurately scaled from prototype blueprints
Period-correct detail options, including carbody, pantograph and hardware variations
Accurate paint and lettering
Several road numbers per paint scheme (where applicable)
Full cab interior
New Haven delivery and repaint schemes (repainted units have smaller NH logo on nose and re-positioned/larger nose road number)
Directional operating pantographs (sound models only)
DC/Silent or DC/DCC/Sound versions available
DC/DCC/Sound version features an ESU Loksound decoder with accurate -Jet- recordings
Complete lighting package including headlights, class lights, ground lights and cab interior lighting
Factory-installed MacDonald-Cartier metal couplers
HO Trenton Works 6348 CN Boxcar - Canadian National (w/ Conspicuity Stripes) #598153
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
HO Greenville 86ft Double Plug Door Box Car - Bx-106 Original 1965 ATSF #36918
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: October 2021
Atchison, Topeka, and Santa Fe (ATSF) Bx-106 -Delivery 1965- offers one of the most iconic railroad logos so frequently seen on freight cars over the decades: the Santa Fe -circle-cross.- This car has the largest one you will ever see on an HO scale freight car! This group of cars represents Santa Fes BX-106 class, their second order of Greenville cars. These cars stand out with the large -Super Shock Control- and -Auto Parts- lettering and all of that beautiful fine ATSF car data. Dont forget the six really neat small Santa Fe -circle cross- logos on the bottom of the car that act as delinators! This 1965-built Greenville car features accurate Apex style crossover platforms, an Elcon-National hand brake housing and accurate Center-of-Car Cushioning details with truck mounted brake hardware. Check out those 70-Ton Barber S-2A Roller Bearing Trucks, with 33inch wheels and accurate -Hyatt- roller bearing caps. We are now offering six ATSF numbers in the railroads classy bright red scheme with white stenciling.
HO Flexible Textured Freight Car Load Sheets - Stone Rip Rap - Large
HO EMD SD70ACe - DCC Ready - UP/Spirit of UP #1943
Brand new UP heritage locomotive 1st time offered removable PTC antenna array roof secured w/ magnets Nose mount headlight and ditchlights now LED Late handrails SD70ACe AND SD70M-2
SPECIFIC FEATURES: New for the SD70ACe and SD70M-2, LED lighting Correctly-sized operating ditch lights Snowplow Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or -tube- style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Jacking pads per prototype
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
HTCR or HTSC trucks per prototype
Non-sound QuickPlug equipped with NEM 21-pin DCC plug
McHenry scale knuckle spring couplers
Minimum radius: 18inch
Recommended radius: 22inch
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Early CWSX #140003
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO New Look Bus - New York Bus Service -New York City - Deluxe #1498
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
HO HEP E8A + A Set - DC/ Silent - Canadian National (Executive - Green & Gold) #102/103
The IC and CN E9A Details Include:
Photo courtesy of Craig Walker
Correct HEP muffler and hatch
Modified pilots
Blanked sides with appropriate grille work
Roof-mounted cooling coils
Non-skirted fuel tanks
Hyatt roller bearing journal covers
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Complete lighting effects headlights, recessed ditch lights in nose, class lights, backup lights, ground lights, cab lights and more. (Not all lighting features will work in DC mode.)
Numerous road-specific detail parts in both plastic and etched metal.
HO PC&F 5241 CUFT - Boxcar - St. Lawrence & Atlantic (SLR) - Single Car #179
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 35Ft Fruehauf Integral-Post Volume Van - Nickel Plate #T-271
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16135
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO EMD SW9 - DC/ Silent - Canadian Pacific (CP Block Scheme) #7402
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Canadian Pacific:
Delivered in 1953 / GMDD
Short side handrails
Small number boards next to the headlight
Large barrel style headlight
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
RTR 60Ft Gunderson DD Hi-Cube Box - TFM #2091
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
B-100-40 Boxcar: Golden West - Ventura County - Single Car #140001
Detail Variations:
6-pack includes the following numbers:
#140001
#140002
#140006
#140009
#140014
#140017
Our B-100-40 model features the following details:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Genuine Kadee #158 Whisker couplers
Newly tooled trucks with turned metal 36 Inch wheels
Separate door rods and door tracks
Road number specific number patches
Separately applied coupler cut levers
HO EMD SW9 - DCC Ready - Grand Trunk Western #7013
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- Next18 plug for easy DCC conversion at any time (decoder sold separately)
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
Plaster Cloth - Triple Roll (1 roll/pkg - 8 in x 15 yd, 30 ft2)
Triple Roll - Get three times as much. Perfect for large projects. Packaged in resealable bag.
Plaster Cloth is the easy, convenient method for modeling lightweight land contours and terrain base. The plaster-coated cloth creates a durable hard shell, designed to accept Earth Colors Liquid Pigment, paints, plaster castings and landscape materials easily, with realistic results. Use to fill seams or gaps around rocks, tunnels, and terrain to blend terrain features.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX #16129
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
Resin Prep
NEW Size - now in 8 ozs
Sylvan Scale Models own brand of mould release cleaner. Effectively removes all traces of mould release agent from cast resin parts, allowing for better paint adhesion. This is an organic, pleasant smelling citrus based cleaner that does not contain any petroleum distillates. Do not allow this or other solvent type cleaners to come in contact with styrene. Follow directions and cautions on bottle. Sold ONLY at hobby shops. Each bottle contains 3 ounces. A -must have- on every resin kit modellers hobby bench.
LOCOMOTIVE FEATURES:
CN “website†scheme
CN style plow
Correct trucks per road number
Forward and reverse ditch lights
Nathan K3L horn
#5620/#5624
Late EMD trucks
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
Tall Steel Viaduct Length Extension - 60Ft - Note picture in the middle is this kit
Tall steel viaducts are some of the most spectacular and interesting types of bridges. They are used by railroads to span wide and/or steep valleys, often replacing wooden trestles. These HO and HOn3 Tall Steel Viaducts are available in three base kits, three length extension kits, a height extension kit which adds a 4th and 5th story, and a tower kit. The various kits allow you to design and build your own custom bridge of any length from one to five stories high, with full towers or bents, and straight or curved. A 10-page instruction sheet with over 35 photos and illustrations is included. These bridges are beautifully detailed and are often the centerpiece structure on modelers layouts.
HO SD-26 Gold w/ Ditchlights - DCC & Sound - Guilford Rail System (ST) w/ Conspicuity Stripes #643
Atlas Master Series Gold Features:
-ESU LokSound decoder, supporting all DCC programming modes.
-Flexible mapping of function keys F0 to F31.
-Follows all NMRA DCC standards and recommended practices.
-Lighting effects to match the prototype, including Gyralight and Mars light where appropriate.
-Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
PROTOTYPE INFORMATION:
With over 220 units produced by EMD between July 1958 and March 1963, the SD-24 locomotive generated a total of 2,400 hp with its turbocharged 567D-3 prime mover and C-C wheel arrangement. The majority of SD-24s produced were purchased by four roads: Chicago Burlington & Quincy, Santa Fe, Southern, and Union Pacific. Atlas HO scale model features details unique to each road name:
Burlington (CB&Q): High nose, single-chime air horn on short hood, Gyra-light on short hood (non-operating), winterization hatch
Santa Fe: Low nose, 3-chime horn mounted on left side of hood behind cab
Southern: High nose, 5-chime horn mounted on cab, bell detail on short hood
Union Pacific: Low nose, 3-chime horn mounted between 2nd and 3rd radiator fans, winterization hatch
Guilford 615, 643 & MAERSK (ATSF): equipped with ditch lights
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- Trailer Train with B&O Bulkhead #92270
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Evans X72 Box car: Penn Central w/ Small Logo - Single Car #266850
Detail Variations:
As operated between 1973 to 1976.
6-pack includes the following numbers:
#266577
#266850
#269268
#269320
# 269827
#269899
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
HO Post-1960s Cantilever Grade Crossing Signal - Single-Lane
FEATURES:
- Long-lasting LEDs
- Adds animation and realism to model street scenes
- Modern American cantilever-style signals as used in many communities
- Correct scale dimensions
- Install in minutes in new or existing scenery
- Fully assembled, ready to use
- Color-coded hook up wires
- Operate with Crossing Signal Controller (949-4359, sold separately)
HO Code 100 Curved Double Radius Turnout - Streamline- Left Hand, Electrofrog
Nominal radius - outside: 60In (1524mm), inside 30In (762mm); length: 10-5/32In (256mm).
N Scale Tall Steel Viaduct Tower - Two 4-Story Bents
HO 50Ft PCF B70 Boxcar - w/ ONT/ Youngstown Doors - Ontario Northland #2803
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
Tsunami2 Digital Sound Decoder - 21-Pin NEM form factor - GE Diesel Locomotives
Dimensions: 30.5 x 15.5 x 6.5mm
Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output)
Function Outputs: 8
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V, 22V
Sound Channels: 16
The NEW TSU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more!
The TSU-21PNEM8 can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches.
HO/N Flexible Herringbone Dark Red Brick Sheet (2-Pack) - Small
Product Information
The Chooch Enterprises Flexible Brick Wall Sheet is hand cast in super-detailed flexible vinyl. Easy to use, each pack comes with peel and stick permanent adhesive, which adheres to any flat, smooth surface. Thin material is easy to cut with a No. 11 blade or scissors. Brick sheets are painted in a base wash of color. Use the sheets right out of the package or paint with water-based acrylics. Each sheet measures 3-3/4 x 12inch 9.5 x 30.5cm. Three sizes of sheets are available with this texture: Small for N and HO Scales; Medium for HO Scale; and Large for HO, S and O Scales. Flexible Brick Wall Sheet 2-Packs are part of the extensive line of Chooch flexible walls and paving sheets.
X-25 Mini Acrylic - Clear Red - 10mL Bottle
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or airbrushing. These paints can be used on styrene resins, Styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.
When airbrushing be certain to use any of the following Tamiya thinners: Items-81020, 81030, 81040, 81520, 87077.
Tamiya bottle paint label meanings and quick tips:
- X appointed colors have a glossy finish while XF designated colors are flat finish.
- The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
- Items 81521 and 81021 (Tamiya X-21 Flat Base) can be used as a flattening agent on Tamiya Gloss bottle paints. Simply add any X-gloss color then add flat base. Mixing ratio: 1:1
- The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
- For better paint brushing results use Tamiya Paint Retarder (item 87114) for a smoother brushstroke free finish.
CNR Short Barrel Ore Car - Five Pack - Unpainted and Resin Cast Kit
Conoco The Hottest Brand
Woodland Scenics HO Scale Just Plug Lighted Billboards are an easy way to add lighting effects to your layout. Whether along a rural highway, on city rooftops or on busy streets they add flair to any scene. Used as signs for advertising local shops and destinations, they are staples across North America. Designed to work with the Just Plug Lighting System.
Each Just Plug Lighted Billboard includes factory-installed LED lighting drawing just 20mA.
-Warm white LEDs
-Easy installation
B-18 - HO 7in Amber Jewels (12/pkg)
HO SCALE - BUT CAN BE USED IN OTHER SCALES - MEASURES 0.080 inches
Industrial Water Tank - Kit - 2-3/4 x 2-3/4 x 9in
7 x 7 x 22.9cm
This small, steel industrial water tank was built in 1904 by Chicago Bridge and Iron for the textile mill at Glencoe Village, North Carolina, and is still standing. This exact reproduction is complete right down to the overlapping steel panels on the roof with scale rivet detail and the unique angled ladder. The base is 2-3/4in (6.9cm) square and the model stands 9in (22.8cm) tall. The kit features injection-molded styrene parts, including a one-piece tank for ease of assembly; phosphor bronze guy wires and turnbuckles are also included.
Spray Can - Light Gray (USAF) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
Cab Control Wireless DCC System w/WiFi Throttle
(7Amp, Set with power supply 110V-240VA, USA, Output 15-21V)
Cab Control Features:
- All DCC modes (14, 28, 128 speed steps) Long and short addresses
- Over 16,000 locomotives can be arranged and controlled
- Up to 28 functions per locomotive
- All Scales can be used with the Cab Control system with the variable voltage 7Amp Power Supply
Built-in WLAN Access Point:
- Creates a unique Wifi-Network for your Mobile Control II Wireless throttles
- Supports at least 32 Mobile Control II Wireless Controllers Compliant with all relevant IEEE WLAN standards.
- Suitable for use in America and Europe
- The Cab Control features a LAN port to connect the box to your home network.
- Via the home network, the Cab Control can be connected to Model Rail Road Control Software.
ECoSlink port:
- For easy connection with our ESU boosters, Cab Control supports ECoSlink, a high speed, CAN based bus system.
- The Cab Control built-in booster has so much power that, in most cases, you do not need additional ones.
HOOK UP:
Hook up is simple with the Cab Control system. All you have to do is plug the 7 Amp power supply into the Cab Control box and then hook up your Cab Control box to your track for track power and its ready to go! The wireless controllers automatically connect to the system via WLAN.
UPGRADABLE:
On occasion new features will be added to the Cab Control system. Gone are the days of having to send your DCC command station back to the manufacturer for updates! When a new update becomes available it is as simple as loading this to a USB Data stick and plugging it in to the back of the system. Easy!
PROTECTION:
Each Cab Control system meets the relevant requirements regarding safety and operation on a layout. The track outlet is protected against overload as well as short circuits. Each Cab Control system can differentiate between a genuine short, and a momentary current drain when passing over switches or gaps. We place value on the indestructibility of the device, just like we do with our mobile decoders.
EXPANSION:
As the Cab Control System uses the ESU Mobile Control II Wireless Throttles, expansion is easy as these throttles are already available and will connect automatically to the Integrated Control Unit. The system can also be used with the ECoSBoost Boosters using the ECoSlink Terminals when more power is needed for large layouts.
CAB CONTROL - HANDHELD WIRELESS THROTTLE
Ergonomics & Functionality Combined:
When you hold your Cab Control Throttle in your hands for the first time you will immediately notice its excellent ergonomics. All Parts of the screen can easily be reached with one hand, and unlike a cell phone throttle, the most important functions can even be reached without looking giving you the ability to watch your trains and not needing to watch your throttle. This is due to the central, motorized throttle knob with end stop. With this knob you can delicately control the speed of your trains and change direction.
For activating functions simply touch the icons on the display. The display also serves for changing functions ? exactly the same way as you know it from your mobile phone. Finally, two buttons each on either side serve for changing direction or triggering the most important functions. These side buttons are user editable giving you the choice of what you want to control with them.
Colorized Function Icons are displayed showing what function does what. Gone are the days of having to memorize what function button control what decoder feature.
Running Locomotives:
The Cab Control Throttles can control all locomotives registered in the system and supports 14, 28 or 128 speed steps. All of the important locomotive properties such as name, a picture, function mapping as well as easily identifiable icons for function buttons will be taken from the Integrated Control Unit and will be displayed correctly.
You may switch up to 28 functions for each locomotive, which, of course, can either be momentary or continuous functions. You read that correctly! EVERY Function Button can be momentary or latching depending on your use! No more limitations on how you function map your decoders.
As standards are constantly changing and the number of DCC function buttons is increased a simple update will allow for even more!
Controlling Accessories:
The Cab Control System has the ability to run over 1000 magnetic accessories!
More Fun in Operations:
The high resolution (480 x 800 pixels, 280 dpi), backlit TFT display of the CabControl Throttle always keeps you up to date on the most important operating parameters. Furthermore, you can see if another operator controls a certain locomotive or if an emergency stop has been triggered. The permanently installed, powerful Lithium polymer rechargeable battery will serve you right through the most extensive operating sessions giving 5-8 hours of operation based on how you are using your throttles. Recharge the batteries of your CabControl simply by using the USB port on the Integrated Control Unit and the supplied Micro USB Cable or the battery charger of your mobile phone or any other USB port.
Open Platform:
The Cab Control Throttles are based on the Android operating system. We have created a powerful basis for this open, globally used operating system: The ARM Cortex A8 microprocessor clocked with 1.3 GHz and controls a high resolution 3.2 inch TFT color display. A capacitive touch screen assures touch-free data entry. For communicating with the outside world there is an USB port and a WLAN interface. Thanks to the standardized radio control interface, trouble free operation of your layout can be assured at any time. The range can be extended with WLAN repeaters, if necessary.
Due to the open platform design you may add further apps for the Google Play Store at any time.
HO Ready Made Realistic Trees Value Pack - Mixed Green 3 - 5inch 7.5 -12.5cm Tall pkg(14)
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors.
N Scale Unpainted Hydrocal Castings - Cut Stone Retaining Walls (6 pkg)
Use Retaining Walls alone, installed adjacent to each other to create straight or curved walls or use with Tunnel Portals. Cut to varying heights to create stepped, winged walls. 6 ea. Color with Earth Colors Liquid Pigments. 135ft (41.15m)scale length
1mm Static Grass - Patchy Grass (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
N Scale Double-Track Truss Bridge - 9-3/4in (24.8cm) - Black
HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - DT&I
#85000
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
Red, Black, Gray Load, Black Trucks
The Schnabel cars unique design allows it to carry extremely heavy or oversized loads, such as generators and transformers for power stations, by making the load an element of the car. The two tapered lifting arms that hold the load resemble a birds beak, which gave the car its name Schnabel is from the German for carrying-beak-wagon -Tragschnabelwagen. Schnabel is a funny name for a seriously powerful freight car.
Features include:
16 sets of 125-ton roller-bearing trucks
prototypically correct 36 inch metal wheels
RP25 wheel contours
8 span bolsters
detailed transformer load
molded hydraulic lines and pumps
27.5 inches long
E-Z Mate Mark II couplers
This model performs best on 22 inch radius curves or greater.
ReadyGrass Mat Accessories - Mat Adhesive - 7oz (207mL)
Product Information
Use for permanent or temporary mounting of ReadyGrass Mats on any surface; can also be used for mounting puzzles and posters to art board.
HO Downspouts for 5Ft Roof Overhang - pkg(4)
HO Scenic Accents(R) - Wedding Bouquet Toss (6pcs)
All available women line up! The bride is tossing her bouquet!
Complete your scene and bring it to life with affordable works of art in HO scale. Sculpted in fine detail and hand-painted, they add color, humor and interest to any layout. Scenic Accents figures have a natural charm and a realistic appearance that steal the show! Attach with Scenic Accents Glue and position with Gentle Grips.
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1808
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
1/4 inch OD Round Aluminum Tube 0.014inch Thick x 12inch Long
Round Aluminum Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 1/4 inch
Walthers Mainline HO EMD F7 A B Set - ESU Sound/DCC- Penn Central
Add classic diesel power to your HO roster in minutes with Walthers Mainline F7 diesels! Introduced in 1949 as railroads began dieselizing with a vengeance, they were equally at home in freight or passenger service. Delivered in a rainbow of color schemes for nearly every railroad in America, many served into the 1980s. Ready to take on any assignment on your HO railroad, features of Walthers Mainline F7 locomotives include:
Prototypes in freight and passenger service from 1949 to the 1980s
Powered A and B units
Colorful paint and lettering schemes
Factory-installed handrails
Available with ESU Sound for DCC and DC layouts featuring:
- 4 function outputs with brightness control by CV
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch prime mover sounds
- Compressor
- Dynamic brake
- Multiple realistic lighting effects
Same powerful drive as WalthersProto(R) locos featuring:
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet, easy multiple unit operation
- All-wheel drive and electrical pickup
- Dual machined brass flywheels
- Heavy die cast metal chassis
LED Mars Light (upper) and headlight (lower) on A Unit
21-pin plug on Standard DC models for easy DCC conversion
Correct size RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs, which have known issues with our decoders.
Alternate horns and bell sounds can be programmed on the sound decoder using these CVs:
Horns: CV163 = 0 - Leslie A-200
CV163 = 1 - Wabco Single Chime
CV163 = 2 - Nathan M3
CV163 = 3 - Leslie S3L
Bells: CV164 = 0 - Bronze Bell (default)
CV164 = 1 - Steel Bell
Additional information on DCC functions:
ESU CV List
ESU Function Mapping
ESU Function Output
Officially licensed by Amtrak Amtrak is a registered service mark of the National Railroad Passenger Corporation
20Ft Corrugated Containers with Corrugated Doors, Mitsui OSK Lines 2pk
MOAU 035542(0) and MOAU 035537(5)
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended.
HO TTC G-Class Subway - Unpowered - 2-car Train + Display Platform #5000+5001
INCLUDES: ST. CLAIR STATION PLATFORM DISPLAY BASE
Each Rapido Toronto Subway Car features:
Design created from original factory drawings and field measurements
Fully detailed interiors including seats, hand holds and lighting
Working lights: headlights, rear marker lights, destination sign
Fully detailed underbodies
Wire grab irons
DC/DCC ready or DCC/Sound (Display models are unpowered)
Display models include lighting powered by an included 12V DC power supply
Ages 14 and up. This is not a toy.
Evergreen Scale Models - OD White Polystyrene Rod .125In x 14In (4 pcs pkg)
HO EMD SD70ACe Diesel - DCC Ready - Progress Rail (EMDX) #2121
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
PRLX FEATURES:
Late production units with isolated cabs and PTC antennas
Large inverter cabinet grills
Front and rear ditch lights
Due to surplus production line capacity, Progress Rail outshopped several locomotives in the early 2020s (some sources indicate that these units were to be part of a Norfolk Southern order). The two units on offer here are known as -Tier 4 Credit SD70ACes-, and are produced using -banked- credits that are obtained from the production of tier 4 emissions-compliant units.
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
HO FMC 60ft DD/SS Hi-Cube Boxcar - Norfolk Southern #620019
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
MODEL FEATURES:
- Double 8 foot Youngstown doors
- Photo-etched coupler cross-over platform
- Separately applied grab irons, end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for trouble-free operation
- Body-mounted McHenry operating scale knuckle couplers
- 70 or -100 ton roller bearing trucks with 33 or 36 inch wheels per prototype
- Machined metal wheels with RP25 contours
- Minimum radius: 18 inches
HO GE 44 Tonner Phase Ic - DC/DCC/Sound - Southern Pacific (Tiger Stripe) #1900
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
HO Signal Hooded Modern (Single Head-Right)
HO 26Ft Can-Car Dry-Van Trailer w/ Side Door - CN Piggyback #260003
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
Tangent Scale Models Delivery 1969 - Gunderson 6089 50ft BoxCar D&RGW
Denver & Rio Grande (D&RGW) Delivery 1969 is an exciting release for us. The distinctive D&RGW Grande Gold orange paint coupled with black ends and carefully added roof overspray makes a model that is simply stunning. The prototype Rio Grande graphics were carefully fitted to the available 7 panels of space to the right of the doors. The white paint at the tops of the ends reminds you that this is a high-cube car. The Rio Grande cars feature truck mounted brake details, faithfully replicated with accurate truck-mounted brake beam details and no body-mounted brake cylinder on the Hydra-Cushion underframe. The Tangent D&RGW model also features accurate unpainted Morton style crossover platforms, early 5-board large tack boards on the sides and ends and an Ajax handbrake. Don?t forget to check out those accurate Hyatt rotating roller bearing caps on the 70-ton Birdsboro foundry Barber S-2 trucks!
Product: Gunderson 6089 50ft High Cube Boxcar
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Birdsboro foundry Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 33in Wheels
HO Storefront Signs - Main St. (Set #3)
Blair Line HO Scale Business and Storefront signs are printed in appropriate colors on thin plastic for easy assembly or placement with plastic cement or CA glue. Colorful signs are based on real signs and many include two identical signs for back-to-back, two-sided mounting. Steam and diesel-era signs make great roadside, street-side, trackside and structure details.
Built & Ready Landmark Structures - U.S. Post Office
Assembled - 4-1/8 x 4-3/32 x 2-3/4 inches (10.4 x 10.3 x 7cm)
The Woodland Scenics(R) Letters, Parcels & Post is there for all your mailing needs. Hand-painted and weathered, this layout-ready post office features wood walls sitting atop a stone foundation and is and loaded with plenty of details to set the scene. Features include a covered porch that provides a place to wait when the lines are long, and a set of stairs leading to a side door. A chimney, rear loading dock and an unattached mailbox for dropping off mail at any time of day round out the detailing. Letters, Parcels & Post also contains interior and exterior LED lighting to show off the printed interior. The installed LED lighting is designed for use with the Just Plug(R) Lighting System. 30mA current draw.
HO MLW M420 A/B Set - DCC & Sound - BC Rail (Red/White/Blue) #644, 684
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO The Atomic Cafe - Hydrocal Casting Kit
You can not get a more classic looking Downtown Deco kit than this one! This 25th Anniversary kit features all new master patterns, full color signs, rooftop details, a bit of deteriorated concrete sidewalk, and complete assembly & painting instructions.
DIMENSIONS:
4 x 6-1/2 inches.
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21012
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Shaper Sheet Plaster offers an extended working time and bonds with Shaper Sheet to form a permanent, hard surface. The longer working time makes Shaper Sheet Plaster ideal for covering large projects. Use it as an adhesive for attaching castings to plaster. Accepts Earth Colorsâ„¢ Liquid Pigment.
Net Wt. 4 lbs (1.81 kg)
N Scale 52Ft Mill Gondola - Wisconsin Central #54001
Detailed Information
MODEL FEATURES:
Body-mounted McHenry knuckle couplers installed
Fully assembled and ready for your layout
Screw mounted trucks for accurate tracking
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
Kitty Korner
What downtown area would be complete without a gentleman s club? Kit includes full-color signs and complete painting and aging instructions. Guaranteed to be an attention getter!
Cast Hydrocal plaster walls, plastic door & windows and full color paper signs and awnings.
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
Tangent Scale Models HO Greenville 86ft Boxcar CSX
CSX -Repaint 1991+ leads off this release, offering examples of repaints from B&Os first order of cars in 1969. Applying CSX paint to a Tangent replica is not a walk in the park ? It is all about the big AND little details. This car features the large CSX logo on the center of the sides and accurate Ease up! stickers on the corners. Apparently, the more the better, since CSX also applied tiny Ease up! stickers on each door. Yes, we have faithfully reproduced this extraordinarily small detail. Get out your magnifying glass if you want to read the CSX Quality Check oval sticker applied above the COTS by Grand Rapids employees. This Greenville car features Morton style crossover platforms, an Ajax hand brake housing, accurate End-of-Car Cushioning details with truck mounted brake hardware, and 70-Ton Barber S-2 Trucks with 33in wheels and accurate Timken roller bearing caps. Check out the CSX-specific modern features in this release, including the large tack board mounting location on the door and the single and double third arms on the top door tracks. We are now offering CSX in six different numbers!
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Gunderson Maxi III Well Car (5-Unit Set) - Ferromex #5019
MODEL FEATURES:
- Fully assembled and ready for your layout
- Weighted for optimum performance
- Razor sharp painting and printing
- Prototypically correct 33 and 38 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Body mounted McHenry operating scale knuckle couplers
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- Replacement parts available
- Minimum radius: 18 inches
60ft Pullman-Standard Flatcar - Ready to Run -- OTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
HO GP40-2 Diesel - DCC & Sound - Seaboard System #6615
SBD FEATURES:
- Ex-SCL and Ex-L&N
- Nose headlight
- 5-Chime horn
- Fire cracker antenna
- No plow
- All-new artwork provided by noted SBD railroad experts
ROAD NUMBER SPECIFIC FEATURES:
#1640
- Early phase
- Ex-SCL
- Chicken wire grilles
- 3200 Gal fuel tank
#6608
- Mid/Late Phase
- Ex-L&N
- Q-fans
- corrugated grilles
- 3800 Gal fuel tank
- exhaust silencer
- front anti-climber
#6615
- Mid/Late Phase
- Ex-L&N
- Q-fans
- corrugated grilles
- 3800 Gal fuel tank
- exhaust silencer
- front anti-climber
GP40-2 LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18 inches
SOUND-EQUPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
Large Brass Oval Tube - 0.014 Thick x 12 inch Long
Large Brass Oval Tube (1 pc)
Wall Thickness: 0.014inch
All Scale Classic Trees - Ready Made - Blue Needle 3-1/2 - 5-1/2 inch (4pkg)
Make Realistic Scenery in Minutes!!
Give your layout a change of scenery with Woodland Classic Trees from Woodland Scenics. Fully assembled and ideal for foreground detail, the selection includes several types of trees along with hedgerows. The models are finely detailed with painted, flexible trunks and foliage with natural contrast to enhance any layout or diorama. A unique planting pin and detachable base allow for temporary placement, or ease of removal for cleaning and maintenance. Easily mixed and matched to capture the variety found in nature, trees range from 3/4 to 9inch tall, making them ideal for modelers in all popular scales.
HO Ontario Northland (ONT) - New Image Diesel Hoods - Waterslide Decals
Diesel EMD SD40-2 - Saint Lawrence & Hudson #5627
ESU LokSound DCC & Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
VIA Rail HEP 1 (2020 to Present)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
HO Greenville 86Ft Double Plug Door Box Car - Canadian National (Delivery 10-1978) #795117
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Canadian National (CN) -Delivery 10-1978- is our first Greenville 86Ft auto parts offering in Canadian National. The CN rostered a few orders of Greenville cars, but this order for 80 cars in 1978 was the largest. The 1978 cars have body-mounted brake gear and End-of-Car Cushioning components, along with that signature 5-grab iron body that makes them stand out from any other style of 86Ft Greenville box car. Some of these cars have lasted in their original CNA brown delivery scheme for a long time - we can verify an example to at least 2016! We know this scheme is a big deal - and we thank our CN fans for their patience. We wanted to release it with the correct body grab iron details.
HO USRA Single-Sheathed Boxcar: Maine Central
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO PC&F 5241 CUFT - Boxcar - Berlin Mills - 6 Pack
206, 244, 291, 331, 360, 413
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
Models depict in-service locomotives from the mid-1990s and beyond.
Road name and road number-specific painting and lettering.
Multiple road numbers offered.
New and improved high-torque motor and drive mechanism guarantees smooth operation.**
Operating radiator fans. Improved radiator fan drive unit with quieter operation and selective fan control.**
All-wheel power pickup and all-axle drive.
Heavy die-cast, zinc alloy chassis.
AuroraJanney scale head replica couplers installed.
NMRA RP-25 wheel contour with Code 110 tread width.
Minimum radius: 18? (recommended 22?)
* Lighting functionality is limited on DC models operating on DC track power.
** Improvement over our previously-released HO scale SD60F.
DC Version Features:
DCC ready with 21MTC connector.
Dual sugar-cube speakers (functional after installation of a DCC sound decoder).
Operates on DC track.
Fir 4 - 6inch 10 - 15cm Tall pkg(13
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors.
Spray Can - Mica Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Children Playing Soccer w/Goal Posts (8pcs)
HO New Look Bus Santa Monica
Destination Sign:
8 Ocean Park, National Blvd/UCLA
Detail Variations:
Air Conditioner
Left-side Emergency Door
4-window exit door
Early-style engine door
Standee Windows
Roof-top Fleet Numbers
Intercity branding
N Scale Short Barrel Ore Hopper - CN Mineral Brown #346054
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Southern #10119
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Ballast - Fine Buff - Shaker (57.7 in3)
Use ballast and coal for any scale to model realistic railroad track, gravel roads, crushed rock and stones, hopper loads, and coal piles. Available in several colors and sizes, you can mix and match for a superior realistic effect. Ballast and coal are lightweight and easy to use. Watch the Woodland Scenics video about how to apply it and attach with scenic cement!
ALLERGY CAUTION: Ballast contains tree nut by-products.
N Scale KW Hi-Rail Grapple Truck
The grapple truck is the perfect fit for maintenance services such as picking up bulky waste, brush and debris around the rail yard and on the right-of-way. It is an excellent complement to railroad construction projects and useful for cross-tie loading and transporting.
HO - 89ft Thrall Bi-Level Auto Carrier - Ready To Run -CSX
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6inch (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
Factory-installed grab irons
Separately-applied ladders and brake equipment
Ultra-smooth rolling metal axles with 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24inch radius is recommended for operation.
HO 13,600 Gallon Acid Tank Car - GE Rail Services (NATX) #130005
ETA: July 2023
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Late Red) #475058
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
36in Smooth-Back RP-25 Wheelsets - Pkg (12)
Smooth wheelsets are most commonly found on all diesel era rolling stock. Kadee wheelsets are manufactured to the most exacting standards and feature: RP-25 contour, non-magnetic metal wheels and insulated needlepoint axles.
Wheelset Features:
- Code 110
- Accurate markings
- Incredible detail true to prototype
- Non-magnetic metal wheels
- Smooth tracking free rolling contoured insulated axles
- RP-25 free rolling wheels
- Needlepoint Axles
- Freight & Passenger
HO SD75I - DCC Ready - Canadian National #5750
CN FEATURES:
SD75I body with isolated cab and turbo bulge
Many Canadian-specific detail parts, including:
Ribbed anticlimbers
Raised walkways
CN medium plow on front
CN rock pilot on rear
No HVAC louvers under cab
Pyle early headlights
Large grabirons on cab face
K-3 horn with all bells forward
Spare knuckles on rear pilot
HTCR-II trucks
Large & small Sinclair antennas
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
PRR X31A Double-Door Boxcar: Shadow Keystone, Early - Single Car #69324
Detail Variations:
As operated between 1954 ad 1967.
6-pack includes the following numbers:
#69012
#69081
#69138
#69215
#69324
#69459
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
HO GE C30-7 - DCC Ready - CSX (YN2 Scheme) #7047
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
Refill Tapes - Coarse Grit (6pk)
Tough, flexible tapes for wet or dry application on lightweight, high strength, anodized aluminum frames. Unlike needle files, FLEX-I-FILE automatically follows compound curves, contour changes and fillets w/o leaving scratches or flatspots.
-Removes flash from plastic or metal castings.
-Smoothes and polishes rough surfaces and seams.
-Follows irregular or flowing contours.
-Provides a delicate touch for hairline accuracy.
Use with product 232-123 or 232-700
N Scale 53ft Corrugated Container - COFC #618025
HO RTR 45Ft Fruehauf Z-Van Trailer - Denver & Rio Grande #230086
Detailed Information
MODEL FEATURES:
Separately applied mud flaps
Rubber tires
Fully-assembled and ready to use out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
N Scale Pole Barn and Sheds - Kit
Product Information
This versatile kit will add a lot of detail to any N Scale scene! The Cornerstone Pole Barn and Sheds kit features:
Great value with Pole Barn, Large Shed, One-Car Garage and Small Shed included!
Separate doors and windows
Fits 1950s to the present
Typical of service and support facilities at todays intermodal terminals, classification yards and industrial parks
Measure
Pole Barn: 4-7/8 x 3-11/16 x 1-15/16inch (12.3 x 9.3 x 4.9cm)
Large Shed: 1-3/4 x 1-3/8 x 15/16inch (4.4 x 3.4 x 2.3cm)
One-car Garage:: 1-1/2 x 1 x 7/8inch (3.8 x 2.5 x 2.2)
Small Shed: 1 x 7/8 x 5/8inch (2.5 x 2.2 x 1.5cm)
Detailed Information
MODEL FEATURES:
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
McHenry scale knuckle spring couplers installed
Painted and printed for realistic decoration
Weighted for trouble free operation
33in machined metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
The use of ice to refrigerate and preserve food dates back to prehistoric times. Through the ages, the seasonal harvesting of snow and ice was a regular practice of many cultures. By the turn of the 20th century, manufactured ice became more common. The Pacific Fruit Express (PFE), for example, maintained seven natural harvesting facilities, and operated 18 artificial ice plants. Their largest plant (located in Roseville, California) produced 1,100 tons of ice daily, and Rosevilles docks could accommodate up to 254 cars. At the industry’s peak, 1,200,000 tons of ice was produced for refrigerator car use annually.
A late-19th century wood-bodied reefer required re-icing every 250 miles (400 km) to 400 miles (640 km). The typical ice-bunker reefer from the 1920s were originally constructed with wood sheathing. Later, these early wood constructed cars would be replaced with steel constructed cars with plywood interiors by the 1940s. Vents in the bunker at the end of the car, along with slots in the wood floor racks, allowed cool air to circulate around the contents.
Specifications
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1940 - 1960
Minimum Age Recommendation: 14 years
Is Assembly Required: No
HO FMC 5077 SSD Boxcar - Railbox #17721
MASTER MODEL FEATURES:
- Single or Double Sliding Door where appropriate
- Multiple body styles
- Metal knuckle couplers
- Plate B Box Car
- X-Panel Roof
N Scale 1960s Volkswagen Camper Van - Assembled -- Marino Yellow, White
HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) #484643
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
ESU Mobile Control II Throttle Holder
FEATURES:
- Easily Mount To Fascia
- Charges Throttle In Holder
- USB Cable & Magnet Included
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #1179
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
ACC Black Booster Terminal Plug
- Black Color Matches Original Plugs Shipped with DB220 Boosters
- Replacement for lost or damaged booster terminal connectors
- Specifically for DB220, compatible with all Digitrax Boosters/Command Stations
HO Flatcar w/Logging Crane - Union Pacific #14936
This Walthers Trainline HO Scale Flatcar with Logging Crane is great for adding to any freight train on your layout or train set. Trainline freight cars feature RP-25 metal wheels for superior performance on all kinds of track including smaller scale-sized Code 70 and larger rail. With their added weight, body-mounted knuckle couplers, and wheel tread matched to National Model Railroad Association standards, wheels on Trainline rolling stock are compatible with almost all North American HO model railroads and can be used as you expand your railroad. Other features of this Flatcar with Logging Crane include molded details that stand up to handling during operation and realistic paint schemes for good looks.
-Fully assembled, ready to run
-Perfect for use with Trainline Log Dump Cars
-Colorful paint and lettering schemes
-Fully assembled, ready to run
-Use with any HO Scale train set
-Body-mounted magnetic knuckle couplers
-RP-25 metal wheels
HO Scale H1b Hudson Steam - DC/DCC Ready - Canadian Pacific (Spans the World) #2814
-Late walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO EMD GP9 Phase 2 w/High Hood - DCC & Sound - SOO Line #2553
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
Product Information
The WalthersMainline Phase II High-Hood GP9 is a must-have model for your first-generation diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as -phase two- GP9s. Like its prototypes, many still going strong today, the WalthersMainline Phase II High Hood GP9 is the perfect power for any assignment and features:
Standard high short hood
Based on as-built units produced from 1955 to 1957 (Phase II)
Limited edition - one time run of these roadnumbers!
Scale width hood with correct contours
With or without dynamic brakes as appropriate
Front and rear footboards
See-through steps
Same powerful drive as WalthersProto(R) locos featuring:
Five-pole skew-wound motor
14 to 1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Machined brass flywheel
Heavy die-cast metal chassis
Constant and directional LED headlights
21-pin DCC plug
Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately)
HO Chemical Distributor - Kit
FEATURES:
All-new contemporary trackside industry!
Perfect stand-alone or as part of a larger operation
Fits 1960s to present day
Great value with 5 complete structures:
- Main Building
- Shipping Building
- Free-standing Office
- Storage tanks with containment basin
- Pipe Bridge
Detailed steel walls
Dual-loading rack for shipping building interior
Two loading racks for rail cars
Four truck docks with doors and seals
Realistic piping
Molded in five colors
Measures:
Office - 1-13/16 x 5-13/16 x 2-1/4 inches
Main Building - 13-13/16 x 9-3/8 x 5-1/8 inches
Shipping Building - 9-1/2 x 5-7/16 x 5 inches
Storage Tanks - 5-11/16 x 5-1/2 x 5-1/2 inches
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
HO Union X-3 Tankcar - UTLX (1930s Paint) #32179
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO Custom-Line Code 83 - #8 Left Hand Turnout
Custom-Line Turnouts are prototypically accurate, featuring blackened metal frogs and rivetless switch points that provide superior electrical conductivity. These turnouts can be powered using an under-table switch machine or standard remote and manual code 83 switch machines. All Custom-Line Turnouts have the same geometry as the current Atlas code 100 versions, for drop-in installation in Atlas and other layout plans.
Please note that you cannot substitute a Custom-Line for a Snap-Switch as their geometries are different.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AABX #206027
AN OTTER VALLEY EXCLUSIVE
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #1132
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15110
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Enamel Product.
The perfect wash for modern aircraft exhausts. This color also works perfectly on scifi models and metallic parts Just shake well before use and you can apply it directly to your model to create depth in the details of the aircraft exhausts and engine parts. This is an enamel product and can by dissolved using our white spirit or ODOURLESS TURPENTINE. We recommend that this product is applied to surfaces that have been painted or varnished with acrylic paint.
N Scale 50Ft NACC Box - Dresser Magcobar #42999
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
HO B36-7 - DCC & Sound - Southern Pacific #7769
The B36-7 Locomotive features:
Incredible underframe detail including piping, a ridiculous number of separately-applied parts and full cab interior
Dead straight metal side handrails with plastic stanchions
A crazy level of road-specific detail options, with different pilots, anticlimbers, plows, fuel tanks, air dryers, antennas, wind deflectors, headlight locations, air-conditioning units, different bodies, multiple nose and rear end styles, three versions of drop step and so on...
With or without class lights (as appropriate)
Conrail locomotives come with their unique -red bug eye- marker lights
Equipped with ditch lights - on front and/or rear - as appropriate
ATSF and Southern Pacific locomotives have Stratolite beacons
Three styles of operating, flashing ditch lights, front & rear (as appropriate)
Working headlights in correct location, switchable number boards at both ends and cab interior headlight
Metal Knuckle Couplers
All units come equipped with DCC/ESU LokSound
HO 26Ft Can-Car Dry-Van Trailer - Canada Cartage #8H0375
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
HO Scale Thrall 53Ft Articulated Well Car Set - TTX (Blue Ex-BRAN) #888737 (3pkg)
Features:
Each car consists of three wells--A,B & C.
Walkway variants specific to prototype
Etched metal detailing
Detailed air reservoirs
Detailed brake valves
Sharp hand grabs and stirrups
Runs on 18inch radius
Recommended for 22inch radius
Floor pin holes for Atlas and other brands of containers
Product Information
When the domestic intermodal container market settled out in the late 90s, the 53Ft long container emerged the winner. Car builders responded with new wells of like size to accommodate the new standard. Introduced in series service in early 2000, Thralls triple 53Ft articulated well car was certainly the best looking of the 53Ft wells. Angular wheel cutouts, 3 flared-bottom wide and 8 narrow side posts give this intermodal age well car character.
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) #653247
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO Alco RS3-M Chop Nose - DCC Ready - Delaware & Hudson: Bi Centennial #1776
Photo courtesy Mike Herman Family
Delivery Expected Early 2024
Details:
RS-3 units #4115, #4106, #4107, #4113, #4122, #4112, #4119, and #4128 were rebuilt by Morrison Knudsen into RS-3m units (numbered #501-508, respectively) between December of 1975 and March of 1976. The locomotives were re-engined with the 2,000 horsepower ALCo 12-cylinder 251C engine, and the long hood was raised six inches to accommodate the larger engine. The dynamic brakes were also moved to a box behind the cab.
HO NSC Ballast Hopper - CSX #965545
1980s+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO EMD GP40 - DCC Ready - RF&P (Blue and Grey) #127
1982+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
N Scale 50ft FMC Combo Door Boxcar - Railbox/ABOX (Late) #50113
Era: 1971-1990, 1991-2009, 2010-Present Day
MODEL FEATURES:
- Screw mounted, Roller bearing style trucks
- Scale profile brake wheel
- Accurately painted and printed for prototypical realism
- Body-mounted, McHenry operating scale knuckle couplers
- Machined metal wheels operates on Code 55 and 80 rail
- Weighted for optimum performance
- Highly detailed, injection-molded body
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Bulk Pack - Whisker Metal Couplers - Long (25/64 inch) Centerset Shank (25pair)
The next evolution of model train couplers starts and ends with the Kadee Whisker series of couplers. The scale size and detail of the #58 coupler has long been popular with model railroaders, so we knew we had to offer a Whisker version. The #156 is a Long Centerset scale sized coupler with smaller head and knuckle for a more prototypical look. The #156 features an even longer-lasting and more reliable design. No more fumbling with centering springs. No more multi-piece assemblies. The #156 Whisker coupler is a true drop-in coupler. Use Kadee Whisker couplers in your next model and enjoy the most reliable and smooth coupling experience you have ever had. Always made right here in the USA with legendary Made In America quality.
The #156 is interchangeable with the #26, #36, #146, and most manufacturers Long Centerset OEM knuckle couplers. For a #36 equivalent use the #156 in a #252 Gearbox.
Package Includes:
- (25) Pair #156 Scale Whisker Metal Couplers - Long Centerset Shank
- (10) Spare #625 Knuckle Springs
(Gearboxes not included)
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. For insulated couplers use the #26 coupler.
HO Code 83 Nickel Silver Rail - Wooden Ties - Flex Track (25pk)
Peco Code 83 track items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings.
Technical Specification:
Length: 3ft each
USE:
SL110 Conducting Rail Joiners: Nickel Silver for PECO Code 83 track
SL111 Insulated Rail Joiners for PECO Code 83 track
SL14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork
3/64 inch Diameter Round Brass Rod - 12inch Long (4 pkg)
GLa 2-Bay Hopper: PRR Circle Keystone - 6(pkg) #2
Features:
All-new tooling
Scaled from original blueprints
Die cast frame and floor for optimum weight
Full interior rivet and bracing details
Factory installed wire grab irons
K- or AB-brake gear installed as appropriate
Factory installed Kadee #158 couplers in narrow draft gear box
Turned metal wheels in correct PRR 12D-F8 trucks
Accurate paint and lettering
Multiple road numbers available for each paint scheme and railroad
Detail Variations:
As operated from 1934 to 1954
6-pack includes the following numbers, all individually packaged:
#163872
#164438
#164584
#164921
#167363
#168912
HO Canadian National ex IC 50Ft Boxcars - 1990+ - Waterslide Decals
Description: HO scale - Illinois Central (IC) Canadian National ex IC 50Ft Boxcars Circa 1990+
HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Early Red) #475008
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
Gunderson Maxi III Well Car (5-Unit Set) - Ferromex #5011
MODEL FEATURES:
- Fully assembled and ready for your layout
- Weighted for optimum performance
- Razor sharp painting and printing
- Prototypically correct 33 and 38 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Body mounted McHenry operating scale knuckle couplers
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- Replacement parts available
- Minimum radius: 18 inches
HO 72Ft Centerbeam Flatcar w/Standard Beam - Duluth, Winnipeg & Pacific #626675
Product Information
Shipping lumber by train is easy for your HO railroad with a fleet of WaltherMainline 72Ft Centerbeam Flatcars on the job! Designed to speed loading and unloading, these bigger cars entered service in the 1980s and quickly became a favorite with shippers and customers. These nicely detailed models are based on earlier cars built with oval cut-outs (popularly known as -opera windows-) on the centerbeam to reduce overall weight, which are still in service with a wide range of railroads and lumber producers. Other features include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1980s to the present
Heavy die-cast metal underframe for excellent tracking
Correct 36inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Model loaded cars in minutes with SceneMaster Wrapped Lumber Loads (#949-3121-series, each sold separately)
HO 40Ft Standard Height Container - Cosco Shipping (CSNU) Set #2
FEATURES:
40Ft based on corrugated design with logo panels
All containers feature opening doors
Accurate painting and lettering
3 pieces per set
HO 39Ft Trinity 3281 2-Bay Covered Hopper - Blue Circle Cement #251
Product Information
WalthersMainline makes it easy to add more business to your HO Scale railroad with the 39Ft Trinity 3281 2-Bay Covered Hoppers! Built especially to handle heavier materials, theyre often seen in unit trains moving loads of fracturing sand to new oil fields. Based on the later production prototypes introduced in the 1990s with seven side panels (two narrow and five large), they can also be found moving cement, bentonite and other heavier cargoes. Ready for service in a variety of modern schemes, each with four numbers, theyre perfect for serving the Cornerstone(R) Glacier Industrial Sands (933-4035), or the Road-to-Rail Aggregate Transfer (933-4036) structure kits, both sold separately. Features of these models include:
One time run of these roadnumbers, order now - limited quantity available
In service from late 1990s to the present
Built especially for heavier materials including fracking sand, cement, bentonite and more
Separately applied brake gear, running board, discharge gates, inlet hatches and end ladder cages
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
Kit - 4 Each of 2 Styles
Part of the Cornerstone Modern Industrial Park series - read more here!
Typical of large capacity air conditioners and air handling units used on many industries, businesses & public buildings
Perfect for modeling roof- or ground-mounted equipment
Two complete spruces with parts for eight units (four each of two styles)
Spray Can - NATO Black (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Enterprise 2-Bay Covered Hopper - Penn Central PC #881832
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO GP38-2 - DCC Ready - Grand Trunk Western (GTW) #5856
Detailed Information
GTW FEATURES:
Ex-Rock Island
Mid/Late Phase
Large anticlimber
3600 gallon fuel tank
Xenon Strobe
M-3 Horn
Small EMD front plow
Blomberg B trucks
Firecracker antenna
88inch Nose with removed class lights
After the demise of the Rock Island in 1980 many of their locomotives were sold to other railroads. The GTW purchased some of these GP38-2s and painted them into this catchy red and blue scheme. Our models represent the pre-ditch light era.
ROAD NUMBER SPECIFIC FEATURES:
#5853
Large GT logo
Long hood mounted horn
White Xenon beacon (operational with DCC)
All-weather window
#5861
Large GT logo
Long hood mounted horn
White Xenon beacon (operational with DCC)
All-weather window
#5856
OLS with small GT logo
Cab mounted horn
White Xenon beacon (operational with DCC)
All-weather window
GP38-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO 50ft PS 5277 Cu.Ft. Exterior Post Boxcar - Rock Island #302160
FEATURES:
- Laser Sharp Painting and Printing
- 33 inch InterMountain Precision Metal Wheelsets
- Kadee #178 Metal Knuckle Couplers
Date: NEW 8-79
Minimum Radius - 22 inches
Bob Smith Industries Quick-Cure 5 Minute Epoxy (4.5oz)
This is a nine ounce package of Bob Smith Industries QUIK-CURE 5 Minute Epoxy. QUIK-CURE 5 Minute epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE shouldnt be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE is the only BSI epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE can be handled after 15 minutes. Full strength is reached in 1 hour.
HO FMC 5077 SSD Boxcar - Vermont Railway #3548
MASTER MODEL FEATURES:
- Single or Double Sliding Door where appropriate
- Multiple body styles
- Metal knuckle couplers
- Plate B Box Car
- X-Panel Roof
FMC Chemicals SHPX (996H) - In Service 1966 #76002
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO NSC Ballast Hopper - Canadian National (Branchline) #90165
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO 70-Ton 12-Panel Hopper - Southern #74690
Blt.6-66
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO 4-Bay Cylindrical Grain Hopper - CN North America #371897
FEATURES:
- blackened metal wheels
- body mounted couplers
- non-magnetic axles
N Scale 50Ft NACC Box - Delaware & Hudson D&H #28033
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
United Parcel Service UPS Package Truck (Car) - Modern Shield Logo
Die Cast
Now its easy to add UPS(R) service to your HO layout with this exciting series of officially licensed replicas from Walthers that includes Cornerstone structure kits, SceneMaster vehicles and figures!
Based on the P-600 that is been a fixture of the delivery fleet since 1965, these purpose-built vehicles offer 600 cubic feet of cargo space and are still going strong today! The models come fully assembled, finished in the correct UPS Brown and lettered in gold with authentic logos.
HO 1950s-1982 Checker Sedan Taxi - Assembled -- Winnipeg
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - PTTX #93436
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Bathtub Coal Gondola - MWCX (ex-CP) #100416
Built: 3-06
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO GP9RM - DCC & Sound - Canadian National (Large Noodle) #7008
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO 50Ft PCF B70 Boxcar - w/ ONT/ Youngstown Doors - Ontario Northland (4 pkg)
Includes Road Numbers:
2800, 2802, 2803, 2807
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
HO RTR ACF 4650 3-Bay Hopper - SOO Line #74177
Date: BLT 11-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO EMD SD10 - DCC & Sound - Milwaukee Road #553
Milwaukee Road
- SD10 model designation given by Milwaukee Road for their capital rebuild program of their old SD7s and SD9s
- A first in HO Scale plastic models
- Single fuel tank
Chopped short hood and modified cab
- Later style Horst air intake
- Rotary beacon
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO Scale - 1937 Studebaker COE Beverage Truck - Unpainted and Resin Cast Kit
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Seaboard Air Line - Delivery #101
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO ALCo RS-3 - DCC Ready - Norfolk & Western #306
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
Analog (DC) version has 21 pin socket for DCC module.
DCC non sound recommended decoder for Current Production (21 pin socket)
ESU #59629
or
TCS #EU-821 8 function decoder
FEATURES:
- Blue with Yellow lettering
- 7 foot cab
- cab mount horn
- body side number boards
- under deck storage box
- dynamic brakes
Bob Smith Industries 119 Insta-Flex Clear Rubber-Toughened CA Glue 10z
Insta-Flex+ clear rubber toughened has similar qualities to our black IC-2000 but can be used in applications where you do not want the adhesive to be seen. The carbon component of IC-2000 that gives the CA its black color also contributes to its unsurpassed strength. Since INSTA-FLEX+ has this carbon removed, its strength is a little less than IC-2000 but still superior to standard CA's. When esthetics are important and a flexible bond is required, INSTA-FLEX+ is your best choice. It forms superior bonds to soft urethane and vinyl plastics. Both INSTA-FLEX and INSTA-FLEX+ work well when bonding R/C car tires. When a joint has a larger than normal gap, flexible CA's provide superior shock resistent bonds.
Excel Hobby Blades - Self Healing Cutting Mat - Green - 5.5In x 9In, 14cm x 22.9cm
HO Value Line RTR - 13 Panel Coalporter - CSXT (Gray) #390431
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO Alphabets - Railroad Gothic - Red - Waterslide Decal
Description: (formerly 87-70-5) Alphabets - Railroad Gothic - Red
HO Scale Butterfly Style Station Platform Shelter - Kit
Product Information
Butterfly-Style Station Platform Shelters are a great addition to the Walthers Cornerstone HO Scale Union Station kit and other railroad passenger depots. For passengers at any station the platform was the first and last stop for every passenger. Tall walkways allowed passengers fast and easy access to and from trains. The hard surface made it easy to wheel baggage and mail carts into place, as well as supplies for the diner or other cars. And since no one liked being too wet or warm, a roof provided some protection from the elements. As an alternate to costly train sheds, North American railroads tried three distinct styles of station platforms including the Busch, Umbrella and Butterfly types. Of these, the Butterfly (so named because of its up-swept, wing-shaped roof) was cheaper to build and eliminated the maintenance headaches of other designs. Providing plenty of ventilation for engine exhaust and just enough protection from the sun and rain for passengers, Butterfly platforms gained widespread popularity early in the 20th century.
Building a detailed terminal scene for your passenger trains is easy with this kit. Based on the almost universal Butterfly design, platforms of this type can be found at stations in big cities and outlying suburbs where they have served passengers for many years. The kit includes parts for four complete platforms and features a modular design so you can combine multiple kits to make longer platforms. To get passengers to and from trains safely, a pair of optional underground subway stairway entrances are included to add realistic detail without a lot of work. Wooden walkway crossings between tracks, platform benches, detailed steel columns, platform signboards and realistic details are all included. Ideal for use with any steam, transition or diesel-era layout, these train depot platform shelters look great alongside Cornerstone Union Station 933-3094, sold separately, and similar station facilities. The Butterfly-Style Station Platform Shelters kit is one of a wide variety of Cornerstone HO Scale railroad structures.
Great for steam or diesel-era layouts
Underground stairway entrances included
Modular design allows easy expansion with additional kits, sold separately
Molded in appropriate colors
Includes four benches, wooden cart crossings, signboards and other details
Easy-to-build plastic kit
HO FMC 4700 Covered Hopper - AFEX (3pk)
MODEL FEATURES:
- Separately-applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, -brake cylinder and triple valve
- 100-ton trucks with 36 inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
- Factory applied roof walk, roof hatch, end details, ladders, and wire grab irons
- Two outlet grate variations
- Accurately painted and printed on a highly detailed, injection molded body
- See-through etched metal end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- All 3-packs feature unique road numbers
- Minimum radius: 18 inches
HO 7/32 inch Open Web Truss - Cellform Style (2pcs)
Use for roof trusses, space frames and other modern and/or futuristic steel structures. Precision Injection Molded in Styrene Plastic. Manufactured with a special tongue and groove connection feature to quickly and accurately attain the desired length.
SCALE
ALL
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
7/32
HEIGHT IN MM
5.6mm
WIDTH IN INCHES
1/4
WIDTH IN MM
6.4mm
THICKNESS IN INCHES
3/32
THICKNESSS IN MM
2.4mm
LENGTH IN INCHES
4-1/16
LENGTH IN MM
100mm
RTR 52Ft Mill Gondola, TFM #60099
MODEL FEATURES:
Fully assembled and ready for your layout
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
33In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
Open top cars, such as gondolas, have been a mainstay on railroads for decades as they are ideal for carrying large, bulky loads such as coil steel or scrap metal loaded by crane.
N Scale Roller Bearing Trucks with short ext. couplers (1pair)
Titanium White 9ml pan (D)
Each PanPastel Color is loaded with the highest quality artists pigments; and is made using a unique manufacturing process requiring minimal binder, resulting in rich, ultra soft and low dust colors. PanPastel Colors can be mixed for an infinite palette of colors.
Each pan contains 9ml (0.30 fl oz) of color. 40percent more than the average pastel stick, and yielding approx. 4-5 times more coverage.
Diesel EMD SD40-2 BC Rail #753
ESU LokPilot DCC -motor and light control
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
1950-54 34Ft Tandem Fruehauf Trailer - Unpainted and Resin Cast Kit
HO 85ft ACF 44-Seat Coach - Union Pacific (Portland Rose) #5473
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
One of five original coaches now in the Heritage Fleet, this car was delivered new in 1954 from American Car & Foundry with seating for 44 patrons. Today, UPP #5473 is named for the UP train that connected Portland and Chicago for over 40 years
10Ft 6In Modified 1937 AAR Boxcar - Toledo, Peoria & Western #7022
HO 45Ft Trailmobile Dry-Van Trailer - Canada Cartage #492L45HT
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
Peco SL 111 Nylon Insulating Rail Joiners HO Scale - Code 70, Code 75, Code 83
New part number for SL8311 for Code 83 Nylon Insulating Rail Joiners HO Scale
12 pc package
Circuit Board Power Bus,
HO-Scale / Fits: RS-2, RSC-2, SD40-2 Sold out at Kato
HO RTR Thrall Rebuilt 40Ft Well Car - Trailer-Train (DTTX - Red TTX and Next Road logo) #53240
(yellow, black, small red TTX and Next Road logo, yellow conspiracy marks)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers, order now - limited quantity available
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
70-ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
EMD GP9 Phase II, High Short Hood - Standard DC - Norfolk & Western #769
(blue, yellow)
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today.
Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21-pin DCC plug
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
Based on units in service from the 1960s to 1980s with:
Leslie RS-5T-R air horn
Whip-style radio antenna
Long-hood forward operation
N&W-style bracket and bell
N&W-style spark arrestors
N&W-style etched metal sunshades
Pyle late dual sealed beam headlight
Plastruct 90221 ABS 1/4 rectangle Tube (6pcs pkg)
Specifications In Inches :
Height: 1/4 (6.4mm)
Width: 3/16 (4.8mm)
Wall: 1/16 (1.6mm)
Length: 15
GLa 2-Bay Hopper: Cambria & Indiana - 6(pkg)
Features:
All-new tooling
Scaled from original blueprints
Die cast frame and floor for optimum weight
Full interior rivet and bracing details
Factory installed wire grab irons
K- or AB-brake gear installed as appropriate
Factory installed Kadee #158 couplers in narrow draft gear box
Turned metal wheels in correct PRR 12D-F8 trucks
Accurate paint and lettering
Multiple road numbers available for each paint scheme and railroad
Detail Variations:
As operated from the 1930s to the 1950s
6-pack includes the following numbers, all individually packaged:
#1501
#1523
#1579
#1692
#2005
#2021
HO 26Ft Can-Car Dry-Van Trailer - Canada Cartage #8H0386
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
Model Railroading in Small Spaces-2nd Edition
Provides creative approaches for building compact layouts and covers how to build seven different layouts.
HO Bethlehem 3350 CuFt Quad Coal Hopper - SBD/CSXT (Black Repaint 1987+) #345871
Repaint Date: 6-87
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36 Inch Wheels
SBD/CSXT Black Repaint 1987+ takes us back to early days of the CSX. In 1987, the ex-L&N South Louisville Car Shops were still in full swing, repainting cars. These repaints featured SBD reporting marks and the now-familiar CSX logo on the hopper car sides. This group of CSX repaints is pulled from ex-L&N Bethlehem cars built in 1976. The models feature an accurate body for this ex-L&N series, including rounded top chord corner caps, paired lower posts at the side bolsters, and tiny accurate triangle supports on the bottom chord near the bolster posts. The B-end of the model features an accurate Universal 7400 high handbrake, modern brake wheel and Morton-style brake step. Inside, the models have a gorgeous (and removable!) flood-style coal load. These coal cars roll on Tangent 100-ton Barber S-2 trucks with separate truck brake beams and rotating Timken caps. The CSX lettering on the cars is carefully replicated, and includes varying CAPY data, South Louisville paint codes and COTS data across the different car numbers. Its time to haul coal!!
Micro Coat Flat - 1 oz. bottle (Clear Flat finish)
The Micro Coat finishes are more than just a pretty look. This is one tough finish and a real breakthrough in a modern formulation of water reducible acrylic resin. For models that get a lot of handling this is the answer.
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20372
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - ATSF #88721
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
RTR 60Ft Gunderson DD HC Box, BNSF/Wedge #761228
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SECX #2330
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 57ft Trinity 4750 3-Bay Covered Hopper - KCS #310557
FEATURES:
- One-time run of these roadnumbers, order now - limited quantity available!
- Prototypes introduced in 1990 - thousands still in service today
- Clerestory-style roof
- Late Trinity-style jacking pads and pulling tabs
- 1990s-era square cornered roof hatches
- Detailed hopper gates with vibrator brackets & outlets
- Perfect for serving Cornerstone(R) grain elevators, sold separately
- 100-ton trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PS-2 2003 2-Bay Covered Hopper - Northern Pacific #75403
MODEL FEATURES:
- Fully assembled and ready-to-run
- Photo-etched roof walks
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Weighted for trouble-free operation
- Window packaging for easy viewing
- Interior plastic blister safely holds the model for convenient storage
- Body mounted McHenry scale knuckle spring couplers
- Machined metal wheels with RP25 contours operate on all popular brands of track
- All 4-packs come with unique road numbers
Tangent Scale Models PS4750 Covered Hopper- MKT- Original 12-1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
MKT Original 12-1979 in the eye-catching green scheme with the large yellow MKT painted on the flanks of the car. Like our BN models, the Tangent PS4750 is the only model on the market to match MKTs one and only order of PS4750s, from the jacking pads, brake system, roof hatches, etc. Check out the prototypical Ellcon-National Peacock D-1600 hand brake and the Brenco-3 style rotating roller bearing caps!
HO 53Ft Gunderson Husky-Stack Well Car & Containers - TTX (Patched Logo) #645259
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Norfolk & Western
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Enamel Pigment Fixer - 35mL
High quality pigment fixer for modeling!
Recommended product to adhere pigments to the surfaces of your models and bases. Use capillary effect to allow fluid to flow over pigment powder. Once dried, pigments are permanently adhered to the surface and return to dry color!
HO 50Ft PCF B70 Boxcar - w/ Superior Doors - SSW/Cotton Belt #67198
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
Tru Color Paint - Acrylic - Erie Lackawanna Gray - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
Tweezers - Cross-Locking
4-3/4inch/ 12.1cm Length
HO GMD-1 - DCC & Sound - Canadian National (1900s Noodle w/ Red Cab) #1915
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- IHB Indiana Harbor Belt #819002
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
N Scale CAPITAL FINANCE CBTX TANK CAR - # 738159
This 56' tank car with Barber Roller Bearing trucks was built by TrinityRail in 2016 for CIT Group/Capital Finance and is used in unit train service for flammable liquids. CIT Group/Capital Finance is a financial holding company that offers railcar leasing options.
HO 1988 G43B Coil Svc. Gondola w/ Coil Racks (Coils Not Included) - Conrail (CR) #601805
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -1988 G43B Coil Svc.- With Coil Racks ? Coils Not Included in the now-classic Conrail red paint. This series represents the former PC-painted G43B series. Conrail maintained the lettering locations that PC did, painting the Conrail reporting marks, road number, and Conrail can opener logo in the same locations PC had stenciled them. The G43B prototype features cushion draft gear, giving the model a distinctive look compared to the other G43 classes. The top chord of the car has a -COIL STEEL LOADING ONLY- stencil to remind customers and railroad officers that the car is equipped with coil racks. Our model has coil racks too, and we sell beautifully executed steel coils for this car separately. We recommend a load of four coils if you want to replicate most prototype loading patterns ? for the size of coil we created. Yes, we did the math. These Conrail coil service gondolas are offered in 12 road numbers and feature details appropriate for these 1969-built cars.
1/4 inch OD Square Aluminum Tube - 0.014inch Thick x 12inch Long
Square Aluminum Tube (1 pc)
Outside Diameter: 1/4 inch
Phase1b - American Versions New York Central DCC & Sound M461
ESU Loksound & DCC
Accurate Phase 1 and Phase 2 details and fluting
Correct Phase 1b, Phase 1c and Phase 2 roof blisters
Rapidos acclaimed -stainless steel- finish
Full interior detail with constant lighting
Two five-pole, skew-wound motors hidden in the actual engine bays
Crazy amount of underbody detail
Separate underframe piping and conduit
Lit number boards and class lights
Optional working front door Mars light, if appropriate
Fabricated or cast truck sideframes, as appropriate
All wheels powered
Separate grab irons and front door chains
Etched-metal roof grills and fan covers
Wrap-around nose fluting, if appropriate
Separate diaphragms, if appropriate
Loads of roadname-specific details
Tangent Scale Models HO V5 PS4750 Covered Hopper CNW Ex-ROCK Blue w/ Black CNW
CNW Ex- ROCK -Blue w/ black CNW- V4 is a second banditized ROCK scheme variation. After the ROCK bankruptcy, CNW and other railroads assumed ownership of former ROCK freight cars, including this series of PS4750s. We have represented some aging of the car body color with faded blue paint. For this version, the large R and The Rock and the reporting mark/number have been painted out. A black CNW herald has been added to the upper right corner of the car, just like the prototype.
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
HO GP9RM Mother & Slug - DCC & Sound - Canadian National (Early) #7230, 216
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
The GP9RM Slug features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks with outside brake shoes or Flexicoil trucks
Traction motor details on gearbox
Detailed walkway tread
Metal side handrails
Footboard pilots or curved plate pilots on appropriate road numbers
Working head lights
Both models are available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200140
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
N Scale Code 80, Large Radius, Curved Turnout - Right Hand
This ever-popular trackage system for N offers a choice of either wooden or concrete type sleeper flexible track and a wide range of turnouts and crossings in both Insulfrog and Electrofrog types.
Suitable for all makes of N Gauge trains and compatible with PECO Setrack.
Technical Specification:
Length: 160mm
Frog Angle: 8 Degrees
Radius: 457 x 914mm
Recommended to be used with:
SL-310 Conducting Rail Joiners: Nickel Silver for PECO Code 80/55 track
SL-311 Insulated Rail Joiners for PECO Code 80/55 track
SL-14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork
Glosscote Clear Finish - 3oz Spray Can
Clear lacquer dries to a transparent, high gloss protective finish that does not alter the color.
SmokeBox Graphics Buffalo Creek ACF 40in Boxcars
Decal set covers both orders of ACF 10in-5in IH boxcars (1953 welded side and 1956 riveted side). Each package includes two of the decal artwork shown on the instruction sheet and will complete up to two cars
Flags (11) and Mailboxes (8) - Canadian flags used from 1965-present
These SceneMaster accessories are a great way to detail any modern HO layout! The set includes 10 small and one large flag printed in full color and complete with poles, perfect for display at schools, homes, factories, businesses and all types of government and public buildings. The set also includes eight mailboxes (4 open and 4 closed) with posts, perfect for many city neighborhoods or farm homes.
HO RTR ACF 4650 3-Bay Hopper - ATSF (Gray Ga-150) #305102
Date: BLT 6-65
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0062
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Feed & Seed Store Signs
Blair Line HO Scale Business and Storefront signs are printed in appropriate colors on thin plastic for easy assembly or placement with plastic cement or CA glue. Colorful signs are based on real signs and many include two identical signs for back-to-back, two-sided mounting. Steam and diesel-era signs make great roadside, street-side, trackside and structure details.
HO GP40-2 Diesel - DCC & Sound - Ferromex #3013
FXE FEATURES:
- Ex-FNM
- Chicken wire grilles
- Standard dynamic brakes
- 3200 Gal fuel tank
ROAD NUMBER SPECIFIC FEATURES:
#3007
- Large plow
- Nathan P-3 horn
- forward ditch lights
#3013
- Large plow
- Nathan M-3 horn
- forward ditch lights
GP40-2 LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18 inches
SOUND-EQUPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - BLUX #1006
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) #182493
1935+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
SD70MAC Diesel, w/ DCC & Sound- PRLX #9551
Era: 1994+
Primed For Grime
EMD SD70MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
First time ever with front and rear Rubber MU hoses, Trainline hoses, Cut levers, and rear Spare
PRLX FEATURES:
Progress Rail ended up with quite a few ex BNSF units when their lease expired. While roaming the whole system, they were picked up by NS and CSX as extra lease power and can been still seen operating today.
LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PROTOTYPE SPECIFIC INFORMATION
During the early-1990s, EMD teamed-up with German engineering company Siemens to produce a freight locomotive that was capable of providing AC-traction drive currents, and thus providing a high-horsepower rating and lower fuel consumption for railroads which had an ever-increasing demand for saving fuel consumption by using a lesser amount of units to haul most of their trains.
The EMD SD70MAC was first introduced in early 1993, and began production later-on during the same year after numerous tests and improvements were made. Since then, the EMD SD70MAC has been a staple of heavy freight lines across the country.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OFOX (6 pkg) #9
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
1720
1774
1799
1838
1860
1866
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
RS-18u, DCC & Sound - CP Rail w/Multimark #1832
Era:1980-1998
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
HO RTR ACF 4650 3-Bay Hopper - Western Pacific #11777
(Feather Logo)
Date: BLT 5-82
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO - RTR FMC 60Ft DD/SS Hi-Cube Box - Conrail/NYC #221774
Detailed Information
MODEL FEATURES:
Double 8Ft Youngstown doors
Separately applied grab irons, end ladders, and brake wheel
Photo-etched coupler cross-over platform
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Weighted for trouble free operation
Newly tooled -70 or -100 ton roller bearing trucks with 33inch or 36inch wheels per prototype
Machined metal wheels and RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18inch
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
Railroad Model Craftsman, January 2024 - Magazine
Features:
Pennsylvania Railroad Nassau Division - by JOHN SETHIAN ? This freelanced O scale empire recalls PRR heavy electric action in central New Jersey.
Pennsylvania Railroad X-53 Boxcar - by JAMES KINKAID ? First of a two-part series on the first 50? plug-door boxcars built by PRR in 1959-1960.
Scratchbuild a CP Sand Tower - by PATRICK LAWSON ? Using styrene and 3D-printed parts to build a model of the sand tower at Nelson, B.C.
Boston & Maine SW1 1109 in HO - by CHRIS ADAMS ? Adding details, paint, and weathering to a Walthers model to recreate a specific B&M switcher.
Build an Inexpensive End-of-Train Light - by DICK WISSBAUM ? A simple circuit powered by track current to add a bit of animation to a caboose.
The End: A Caboose Gallery - by OTTO M. VONDRAK ? Cabooses could be found on the end of every freight train well into the 1980s.
Departments:
Safety Valve ? Letters from our readers
Receiving Yard ? New product reports and industry news/compiled by Harry K. Wong
Test Track ? In-depth reviews of new hobby products
Rail Books ? Jersey Central Baldwin Switchers/review by Harry K. Wong
Timetable ? Listings of railroad-related events contributed by our readers
Perspective ? Just Another Small Coaling Tower/Wayne Wesolowski
Boomer Trail ? RPM Meets/Dan Munson and Harry K. Wong
Branch Line on a Shelf ? Expanding Operations on a Small Layout/Scott Thornton
Painting & Weathering ? South of the Border: NdeM Alco RS-1/Miles Callan
Diverging Points ? Backdrops/Jason Shron
Editor's Notebook ? Commentary from your editor/Otto M. Vondrak
Dealer Directory ? Listing of recommended hobby dealers
Index of Advertisers
Tru Color Paint 019 - Acrylic - Atchison, Topeka & Santa Fe Brown (Pre-1945) - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
Steel Ladle Section & Cribbing
High Levels of Detail
HO Scale
Cast Resin
Gray Paint
FEATURES:
- One time run of these road numbers, order now - limited quantity available
- Prototypes seen from coast-to-coast 1974 to the present
- Handles all types of general freight loading
- Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
- 41ft 3in Truck Centers
- 15ft 2in Tall
- 10ft 8in Wide
- Fully assembled
- Correct 33in RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Santa Fe Interlocking Tower - Kit
Product Information
The Walthers Cornerstone HO Scale Santa Fe Interlocking Tower makes adding authentic ATSF structures to your railroad easier than ever. Used in many locations along the railroad, this stucco texture tower will look great at any junction or yard along your Santa Fe-themed layout set in the steam or classic-diesel era. Although based on a standard ATSF building, this tower is typical of those seen along other railroads as well. The Santa Fe Interlocking Tower kit is one of a wide variety of Cornerstone HO Scale railroad structures.
Designed from ATSF standard plans
Ball and cross medallions, stucco finish and diamond-pattern shingled roof
Typical of towers used across the Santa Fe system
Molded in two colors plus clear window glazing
Cornerstone HO Scale railroad structures.
The Santa Fe Interlocking Tower measures: 2-7/8 x 4-7/8 x 5-1/8inch (7.3 x 12.3 x 13cm)
Acrylic - C&O/B&O Gray - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO F30A 50Ft Flat Car MOW w/Deck Rails - Conrail (CR MOW) #58723
This car does NOT include sleeper or camp vans
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
HO EMD GP40 - DCC Ready - SSW/ Cotton Belt #7604
1966+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Central Valley 2003 CVT Tie Strip pkg(50) - Mainline w/8 Ft 6 Inches Ties
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
HO Uncoupler Gluing Jig - For installing #312, #321, and #322 Uncouplers
Uncoupler gluing jig is designed to aid in the precision installation of uncouplers in track.
HO Cable Excavator w/Bucket - Kit
Product Information
Put this easy-to-build Walthers SceneMaster vehicle kit to work along your HO layout! The model features:
Designed for easy assembly - illustrated step-by-step instructions
Highly detailed to bring HO layouts to life
Plastic parts molded in realistic colors
Typical of shovels used from the 1950s to 1990s
Detailed crawler chassis, boom and bucket
Photo shows assembled model.
HO Thrall 2743 Gondola - CEFX (Ex-CP) #33472
FEATURES:
Prototypical scale height reflecting the new higher capacities standard.
Fourteen side posts
Detailed brake components
Etched platform
Etched end reinforcement plate
Detailed ladders and stirrups
Metal hand grabs
Metal brake rods
Air hoses
Corner pins and correct open notch
Detailed side post support angle plates
Optional coupler pocket for Kadee #78 or Accumate Scale Coupler
Accurate painting and lettering
Ready-to-run
HO GP18 - DCC & Sound - Lehigh Valley #303
Detailed Information
LV FEATURES:
Nathan 3-chime horn
Dynamic brakes
Winterization hatch
Forward facing fuel tank
Pilot mounted footboards
One of the anthracite roads of the northeast U.S., Lehigh Valley bought four GP18s (built in mid-1960) numbered 302-305. The units served throughout the 1960s and into the mid-1970s. Lehigh Valley was folded into the U.S. governments bailout of Penn Central and became a founding member of Conrail in 1976. The collection of four GP18s went on from Lehigh Valley to serve Conrail as 7496-7499. The units initially wore patched out Lehigh Valley dress with -CR- markings and all eventually saw repainting into Conrail blue. Among the four GP18s, 304 was rebuilt with a chopped nose during the time it worked for Lehigh Valley; the other three retained high short hoods.
ROAD NUMBER SPECIFIC FEATURES:
#302
1964 era Tuscan red scheme
#303
1964 era Tuscan red scheme
#305
1971 era Cornell Red scheme with large letters and barrier stripes. Modified -cut- conductors side skirt
Long hood mounted paper air filter box
Flat-top dynamic brake fan
GP18 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Accurately-painted and printed paint schemes
Body-mounted McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO Icehouse and Platform - Kit
Product Information
The Walthers Cornerstone Icehouse and Icing Platform brings back the heady days of railroading when fast freights forwarded meat and produce to market in ice-cooled reefers. From the 1880s to the 1970s, ice-cooled reefers were a fixture of railroading. Solid trains raced across country with their perishable loads riding in long strings of refrigerator cars. Supplying ice for the cars in transit was a huge industry. Railroads built ice houses and platforms, like this kit, about every 250-300 miles. Here, entire trains could be serviced and on the move in minutes. This complete kit includes a detailed icehouse, based on a prototype in Antigo, Wisconsin, plus a modular icing platform, from a Pacific Fruit Express design. Lots of add-on details, including an optional platform roof (used in warm areas to shade ice and slow melting), roof vents and 24 ice blocks are included. The plastic parts are molded in color for easy assembly and complete instructions are provided.
The Icehouse and Icing Platform is just one of a wide variety of Cornerstone food industry structures.
Prototypical wooden icehouse
Found along railroads from the 1800s to the 1970s
Icing platform serves
24 ice blocks
Molded in appropriate colors
Completed model w/Platform: 18-1/2 x 6-1/4inch (46.9 x 15.8cm)
Icehouse: 4-3/4 x 10-3/4 x 5inch (12 x 27.3 x 12.7cm)
Pacific Coast Lumber Boat Kit - Tiverton - Unpainted and Resin Cast
Based on the S. S. Tiverton
Owned by Olsen & Mahoney
HISTORY:
The steam ship Tiverton was typical of wooden Pacific Coast Lumber ships known as stream schooners built in the late 1800s and early 1900s. These steam schooners originated when some enterprising mariner placed a small boiler and engine in a sailing schooner. There were designed to carry sawed lumber from ports in northern California, Washington and Oregon to the burgeoning cities of San Francisco and Los Angeles. They ranged in size from about 125 feet to over 200 feet. The Tiverton at just over 150 feet was one of the smaller ones. She was built at Hoquiam, Washington in 1906. In 1933 she ran aground and was wrecked on Humboldt Bar.
HO 85ft ACF 44-Seat Coach w/lights - Union Pacific (Sunshine Special) #5480
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
Delivered new in 1954 from American Car & Foundry with seating for 44, the car is currently named for a Missouri Pacific train running between St. Louis and various Texas cities from 1915 to 1948 when the new Texas Eagle took over its route.
Norfolk Southern NS #2802
These were former ATSF and BNSF Locomotives. Units were acquired in September 2014 via NRE.
SD75M body with turbo -bulge-
Early dynamic brake grills
Nathan 5 chime horn
Two grab irons on cab roof
Tinted cab windows
Nose door with window
Short sunshade brackets
Large and small Sinclair antennas
SD75M 4-step walkway
Spare knuckles and holders on rear pilot
Drop grab irons (MU hose holders) on rear pilot
Low-tab mounted AEI tags
Early jacking pads
Front round top ditch lights
EMD low plow
MU receptacles w/ yellow MU cables front and rear
Late 5000 gallon fuel tank
Stem-mounted fuel gauge and late sight glass
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Operating ditch lights
MU receptacles and cables per prototype
Pilot face spare knuckles and brackets per prototype
Early or late anticlimbers
3 or 4 step walkways
AEI tags mounted on the frame or jacking pads per prototype
Safety tread on the walkways
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Anti-glare panel painted on the nose
Windshield wipers
Tinted or clear cab windows per prototype
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Standard or Freight-style brake wheel
See-through radiator fans
Lift rings
Factory installed wire grab irons
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Dual sanding lines
Rear pilot drop grab iron (MU hose retainer) pre prototype
DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on Code 55 and larger rail
Incandescent bulbs for realistic appearance
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Recommended radius: 22inch
Onboard DCC decoder with SoundTraxx Tsunami sound
HO RTR 70 Ton 2 Ballast Hopper w/ Side Chutes - ATSF #177158
Blt. 5-57
Product Information
Perfect for work train service on our railroad, Bowser HO Scale ready-to-run 70-Ton 2-Bay Ballast Hoppers with Side Chutes (Ballast Gates) feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make these 70-Ton Ballast Hoppers welcome additions to any diesel-era freight train consist.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO Scenic Accents(R) - Welders & Accessories (16pcs)
A set of three men, with protective welding helmets and gloves, working with an assortment of mig and spot welders, a plasma cutter and gas cylinders - complete with angle iron pieces.
Complete your scene and bring it to life with affordable works of art in HO scale. Sculpted in fine detail and hand-painted, they add color, humor and interest to any layout. Scenic Accents figures have a natural charm and a realistic appearance that steal the show! Attach with Scenic Accents Glue (#785-198) and position with Gentle Grip tweezers (#785-200).
HO PS4427 High Side Covered Hopper - CN (Ex-WC) (Conspicuity 2008+) #82114
Truck: Tangent 100-ton Barber S-2 trucks with rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36 Inch Wheels
Canadian National CN ex-WC Conspicuity 2008+ replicates a group of CN red cars for the modern era. The Wisconsin Central inherited its PS4427s in the form of ex-MILW cars at the 1987 startup of the railroad. WC PS4427s survived all this time, and many were repainted by CN at the former IC Centralia, IL car shop. (Recall that the CN took control of the WC in 2001.) These cars feature conspicuity striping on the sides and ends.
Each of the four car numbers is visually different, with photo-specific application of data, logo, conspicuity stripes and jacking pad details. The cars retain their ex-MILW build features, like solid end running board supports and center sill supports between the bays. The ends feature replacement style Morton crossover platforms and replacement smooth roof hatches.
Acrylic Flat Colors - Flat Aluminum - 3/4oz (23mL) Bottle
XF-16
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO Clear Classification Lights (12pk) - 0.052 Inch Diameter
Detail Associates HO scale clear classification and headlight lenses are based on those used on many diesel locomotives and some rolling stock. Parts are molded in clear plastic and can easily be colored using appropriate translucent paints or permanent markers.
HO Scale GP38 - DCC & Sound - Norfolk Southern (High Nose w/ Ditch Lights) #2768
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO Christmas Figures (6pkg)
Bring new life to your layout with ready-to-use Walthers SceneMaster figure sets!
Each figure is carefully sculpted with realistic detail and hand-painted.
Thick Kerf Saw - Woodcraft Saw - 14 TPI (Pull Stroke)
HO Trinity 3-Bay Hopper - KRIX #56043
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO GP40 - Gold DCC & Sound - CP Rail #4600
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
HO EMD F7A - DCC Ready - Wabash #631
Detailed Information
WAB FEATURES:
F7 Phase I
No dynamic brakes
Dual single-note air horns (A-units)
Passenger pilot
Cooling coils on roof
Wabash units 1158-1189 were delivered in 1951-52. In the 1960s, they were renumbered into the 600-726 series. Wabash 1189 has been preserved and is currently operational at a railroad museum in Illinois.
ROAD NUMBER SPECIFIC FEATURES:
#625
Nose MU connection
cut skirts
#631
Nose MU connection
cut skirts
#1169-A
Full Skirt
#1189
Full Skirt
F-UNIT SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Windshield wipers
Lift rings
Wire grab irons
Sanding lines
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Directional constant lighting
Headlight brightness remains constant
Separately-applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes & retention tanks
Speed recorder unless noted
See-through cab windows and full cab interior
Etched metal fan grilles
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO Class D10k 4-6-0 - DC/Silent - Canadian Pacific #1063
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
HO 40ft ACF Modernized Welded Boxcar - Green Bay & Western #623
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
N Scale Graffiti Decal Set - Contemporary Graffiti #2 - Waterslide Decals
60ft Pullman-Standard Flatcar - Ready to Run -- Illinois Terminal
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
RTR 52Ft Mill Gondola, GONX/ RailGon #310877
MODEL FEATURES:
Fully assembled and ready for your layout
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
33In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
Open top cars, such as gondolas, have been a mainstay on railroads for decades as they are ideal for carrying large, bulky loads such as coil steel or scrap metal loaded by crane.
HO Greenville 86Ft Quad Plug Door Box Car - X60R Repaint 1988+ - Conrail #244127
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Conrail (CR) -X60R Repaint 1988+- offers a 1988 Conrail shop repaint of the Penn Central 1970-delivered cars. These cars were painted in Conrail brown paint in 1988 complete with the Conrail logo stenciling in white. This 1970-built Greenville group features accurate End-of-Car Cushioning details, replacement Morton style crossover platforms and truck mounted brake hardware. This X60R group of cars ride on 70-Ton Barber S-2 Birdsboro Roller Bearing Trucks, with 33inch wheels and accurate rotating -Brenco-6- roller bearing caps. These beauties are available with four different road numbers!
HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #900220
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO Hawker-Siddeley Van - Caboose - Canadian National - Late - (Black Steps) - #79242
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
OIF and OEF US (Sand) Modern Vehicles Streaking Effects - Enamel Paint - 35ml
The perfect color for a wash in modern US vehicles OIF and OEF. This Dirt color wash has been specifically suited for use over Modern US sand colored vehicles.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows. The excess of the wash can be easily removed with a clean brush and White Spirit.
F30A 50Ft Flat Car: PRR 1960s Era #474312
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
N12SR
Version 3.3 Measures: 11/32 x 11/16 x 1/8inch (8.6 x .18 x 3.2cm)
1 Amp (1.25 Amp peak) rating and two function outputs
N Scale Flexi Flo Hopper (Late) - Penn Central (Billboard Repaint) #897892
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127459
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO 10 Inch Track Alignment Gauges - Curved - 18 Inch Radius
RibbonRail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking, and joining rail. Track Alignment Gauges are precision machined to NMRA standards and will work on any code of HO Scale rail. Available in many curve radii as well as straight.
HO 40Ft Hi-Cube Dry Containers - Maersk Line (Small Logo) (3pk)
3 pack road numbers include : MSKU 129707/130415/137673
Body: Type A
Door: Type C
Latch: Type C
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
HO Addams Ave. - Part One - Cast Hydrocal Kit
DIMENSIONS: 8 x 5 inches
This seedy looking block of stores includes a Pawn Shop, Liquor Store, Tattoo Parlor and Bar. Part One of a Five Part series. Includes richly detailed hydrocal castings, full color signs, plastic doors & windows & complete assembly & painting instructions.
HO AAR 1944 Boxcar - Illinois Terminal #6025
Expand HO freight service with these colorful Walthers Mainline models based on the popular American Association of Railroads (AAR) standard boxcar design from 1944. Used for all types of general loading, the durable steel cars were still going strong into the 1980s.
Features of these models include:
-Limited Edition - one time run of these road numbers
-4-4 Improved Dreadnaught ends
-Murphy panel roof
-See-through Apex steel running board
-6ft Youngstown doors
-10ft 6in Interior height
-AAR (Tab) side sills
-Correct 33in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO Pivoting Turnout Linkage
Description:
For controlling turnouts from underneath the layout by choke rod or switch machine.
- Virtually impossible to see from above
- Works with any type switch machine
- Can be used with choke rod
- Comes with mounting screws and piano wire
HO 19,600 Gallon Tank Car - Cerestar (NATX) #190190
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Built: BLT 11-99
60Ft PS-1 Boxcar - Grand Trunk Western - BCR #383479
Beginning in the 1960s, automakers approached rail carriers with the desire for larger freight cars to transport auto parts from suppliers to manufacturing centers. In response, the 60Ft auto parts boxcar was introduced. Carrying a wide variety of auto components including engine blocks, transmissions, brake drums, and others, these cars were a fixture throughout North America for the next four decades and can still be found in service today. Often times, entire trains of auto parts and related cars could be seen near major production facilities as automakers switched to just-in-time delivery methods, requiring prompt deliveries from the railroads providing service. It was common to see trains consisting of 50Ft, 60Ft, and 86Ft boxcars, specially modified flat cars to carry lightweight chassis, and autoracks all destined for one auto or truck manufacturing facility. As the auto industry supply chains evolved and manufacturing facilities were consolidated, many of the 60Ft boxcars were used in other markets and could be found hauling a variety of goods including appliances, paper goods, cardboard, and similar items.
Tru Color Paint - Acrylic - Maine Central Yellow - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO MLW M630 - DC/DCC Ready - British Columbia Railway BCR #719
Two tone green w/lightning stripe, Face mounted ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX (6 pkg) #17
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
6
18
33
56
66
78
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO CP Rail Covered Hoppers - 3-Bay Center Flow - Decals
Circa: 1994-97
Scale: HO Scale
Equipment Type: Hopper - Center Flow - 3-Bay - CP Rail
HO Marine Industries Piggyback Flatcar - Canadian Pacific (6 pkg) #1
Includes Road Numbers:
505625, 50629, 505631, 505643, 505649, 505652
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
HO 45Ft Trailmobile Dry-Van Trailer - Taggart Trucking #5406
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
HO F30A 50Ft Flat Car w/Sleeper Van - Conrail (CR MOW) #62109
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
Rapidos F30 Camp Cars Feature
All-new camp trailer loads in four styles
End railings and platforms
Photetched details
Multiple car numbers per scheme
HO RTR 55 F-100 Panel Truck - REA
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
HO Custom Barrels Blue Feed & Seed (5pk)
Pre-painted blue with yellow tops and labeled. Assorted product labels in each set.
HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #903984
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Slimy Grime & Fuel Stains Enamel Paint Set (25, 26, 27)
35ml X 3 jars per set
Accessory Switch (SPDT) - for fitting to turnout motor - (switch machine)
HO Signal Searchlight - Double Head - US&S Cabinet (UP)
HO 50ft Superior Plug Door Box - British Columbia #4713
MODEL FEATURES:
- All models are representative of prototypical paint schemes
- 70-ton Roller Bearing trucks with 33 inch wheels
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Separately applied brake wheel and ladders
- Machined metal wheels
- Weighted for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
N 1967 Ford Galaxie - Burnt Amber, White (2)
HO 40ft Fruehauf Trailer - The Rock #209260
Era: 1971-1990, 1991-2009, 2010-Present Day
MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- 2 or 4 door rods per prototype
- Wheeled or shoe-style landing gear per prototype
- Fully-assembled and ready to use out of the box
- Highly-detailed, injection-molded body
HO Scenic Accents - Cougars and Cubs (6pcs)
Six cool cats ready to sit in the more wild areas of your layout. Two adults stalk prey, while mama lounges and enjoys three frisky cubs!
SD70M-2, CITX #140 - DCC & Sound - SoundTraxx Tsunami2 sound
New for the SD70ACe and SD70M-2, LED lighting
Antenna Dome
Early cab
Nose mount headlight
Nose door with no window
Early handrails
New for the SD70ACe and SD70M-2, LED lighting
Correctly-sized operating ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or tube style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Jacking pads per prototype
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
HTCR or HTSC trucks per prototype
Non-sound QuickPlug equipped with NEM 21-pin DCC plug
McHenry scale knuckle spring couplers
Minimum radius: 18 inch
Recommended radius: 22 inch
Lift Rings - Flat - Mounts on Pilot Beam - pkg(8)
Tru Color Paint - Acrylic - Concrete - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
4785 PS2-CD Covered Hopper - Early End Frame - Conrail - Gray Quality Logo #886920
Shaper Sheet (18 x 72 inch roll)
Use this unique material to model all types of terrain. The strong, pliable sheet can be shaped and reshaped to create any level of detail, and it holds its form without any understructure. This material is formulated to mechanically bond with the plaster to create a thin, hard shell ready for landscaping. Ideal for layouts, backdrops, dioramas, displays and arts & crafts.
1 Roll/pkg - 9 inches wide x 72 inches long, 4.5 ft2
HO Scale G2 AC4400CW - DCC Ready - CEFX #1002
Detailed Information
CEFX FEATURES:
Nathan K-3 Horn
Late body features
Late radiator lift rings
Evenly spaced rear grab irons
Engine air intake moved rearward
Notched fuel tank
Tank welded to underframe
Long handrail on left jogs over capacitor box
Double rail behind cab on left side
AAR style control stand
Electric air dryer
GE Hi-Adhesion trucks
Outside struts on opposite sides of trucks
Front ditch lights
The CIT Group placed two orders late in the production of the AC4400CW. They represent some of the newest features added to the AC4400CW line before its discontinuation. The first group was purposely built with Union Pacific features to whom they were originally leased. The second group was leased to the Canadian Pacific and share spotting features with late model CP AC4400CWs. Both wear CIT Groups distinctive -Blueberry- scheme with CEFX reporting marks.
ROAD NUMBER SPECIFIC FEATURES:
#1002
GPS Dome
High number boards
#1020
GPS Dome
High number boards
#1048
Sinclair Antenna package
Low number boards
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately ?painted and ?printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO 4 1/2in Clear Jewels (12/pkg)
JUNECO B-11 - 4 1/2inch JEWELS - CLEAR - PACKAGE OF 12. HO SCALE - BUT CAN BE USED IN OTHER SCALES - MEASURES 0.050inch
HO 40Ft Refrigerated Container - Crowley Set #2 (3 pkg)
Road Numbers: CMCU 5536692, CMCU 5536732, CMCU 5536753
(White/Black)
MASTER MODEL FEATURES:
40-foot High-Cube Refrigerated Container
Composite materials sandwich-sides design
Detailed picture window refrigeration unit with separate parts
ISO Type 45R1
Five hinge / four bar doors with OUT style handles
Each set comes as a 3-pack
13th Annual Edition CRHA Niagara Division - 2024 Calendar
Written by: Andy Panko
Recognizing 65 years since the last passenger service of the Niagara, St. Catherines and Toronto Railway
HO/HOn3 Code 70 Narrow Gauge Flex-track - Non-weathered 3ft Section (6pcs)
Flex-Trak features scale size ties, tie plates and spikes, irregular tie spacing, natural brown tie color and nickel-silver rail. 3ft lengths.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SECX 6 Pack
2305, 2308, 2312, 2315, 2320, 2330
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
0.023 inch Thick Stainless Steel Flat Strip - 3/4inch x 12inch
Stainless Steel Flat Strip 12inch Long (1 pc)
HO Code 100 Streamline Large Radius, Electrofrog
Nominal radius 1524mm, angle 12 degrees, length 258mm
N Scale Red Wing Milling Co. - Kit
Product Information
Flour mills have changed dramatically since the water-powered mills of the 1800s. The Walthers Cornerstone Red Wing Milling Co. captures the look and feel of contemporary mills in a size that fits most layouts. 1950s and later mills produce enormous quantities of flour and other milled grains. They once received grain in boxcars and have since moved to covered hoppers. Outbound flour and meal moves out in Airslide(R) and similar covered hoppers as well as in bulk hopper trucks. The modern concrete Red Wing Milling Co. features truck and rail loading facilities, blowers, vents, separate doors and windows, and full-color decal signs.
As shown the finished kit measures: 6-5/8 x 4-7/8inch 16.5 x 12cm
Contemporary trackside industry
Prototypes receive grain in covered hoppers or boxcars, ship flour in Airslide hoppers, boxcars and by truck
Exterior dust collectors, fire escape ladders and other details
Railcar loading canopy
Truck loading doors
Easy-to-build plastic kit
Realistic decal signs
Athearn Roundhouse HO 50ft ACF Boxcar C&NW #155193
Detailed Information
MODEL FEATURES:
70-ton Roller Bearing trucks with 33in wheels
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Body mounted McHenry operating scale knuckle couplers
Wheels with RP25 contours operate on Code 70, 75, 83, 100 rail
Minimum radius: 18in
Specifications
COUPLER STYLE: McHenry Scale Knuckle
C-27 ICC Caboose w/Tsunami Sound & Lights - B&O/Chessie System #C-3915
The ultimate detail with the best Genesis features.
International Car Co. began specializing in caboose production as early as 1941. When the railroads entered the 1960s, many needed to replace their aging, in some cases home shop built, cabooses. International Car responded with a product that could be tailored to each railroads specific needs. Using quality components and modern engineering, ICC became a leading name within the industry.
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
ICC CABOOSE FEATURES:
- Better than brass detail including roadname and road number specific detail Laser-Sharp Painting and Printing
- Interior seating for the addition of crew figures.
- See-through End Platforms and Steps
- Flush Window Glazing
- Wire-form Grab Irons
- Caboose trucks with animated rotating bearing or static friction bearing caps
- Axle Generator Details
- Body-Mounted McHenry® scale knuckle-spring Couplers
- Machined Metal RP25 Profile Wheel Sets
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Separate wireform grab irons, etched metal coupler platforms
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for trouble-free operation
- Window packaging for easy viewing, plus interior plastic blister safely holds the model for convenient storage
- Multiple road numbers
- Minimum radius: 18in
LED LIGHT EQUIPPED FEATURES:
- LED lighting for long life and reliable operation
- On-board DCC Decoder by NCE
- Operates in DCC and Analog (DC) with lighting Functions Controllable in DCC
- Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
- LED Interior Lights
- All functions NMRA compatible in DCC mode
SOUND EQUIPPED MODELS ALSO FEATURE:
- Soundtraxx Tsunami SoundCar decoder w/ included sounds:
- Air horn or conductors whistle as appropriate
- Clickety-clack with optional wheel flat spot sounds
- Brake set/release sounds including retainers and brake squeal
- Big Hole emergency brake application sound
- Handbrake tie-down/release
- Adjustable flange squeal
- Air, horn, and bell sounds work seamlessly with Soundtraxx locomotive sound decoders
- Supports Advanced Consisting in DCC
- Full DCC functions available when operated in DCC mode
- All functions NMRA compatible in DCC mode
B&O CHESSIE FEATURES:
- Brand NEW ICC B&O Style body
- Angled window screens
- Early style axle-driven generator
- Caboose trucks with roller bearing caps
- Ash pans
- Toilet Drain
- Illuminated marker lights, where appropriate
- Reflectors on end cages
- Overhanging, diagonal-panel roof with or without blank panel at smoke jack per prototype
- Overhanging, x-panel roof for the B&O Chessie caboose
Chessie #3835, #3887, #3915 features: First time ever C26A version. Dayco axle generator with notched undeframe.
Chessie C-3771 Gold Caboose - Unique safety slogan and Gold and Silver Paint
HO RTR ACF 4650 3-Bay Hopper - Norfolk Southern #251064
Date: 8-92
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
N Scale Single-Track Curved Viaduct - 11-1/8in (45mm)(2/pkg)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly.
The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - GATX #56270
Built: ARG 8-60
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
HO EMD SD70ACe Diesel - DCC & Sound - Union Pacific #8478
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
UP FEATURES:
Early production units built 2005-2006
PTC antennas
Modernized inverter cabinets
Front ditch lights only
Recent repaints
In July of 2022, Union Pacific debuted new locomotive paint schemes. There are several variations, but they all feature the UP shield on the nose, minus the -wings-. The -Union Pacific- lettering in red returns to the flanks of the locomotives, and a smaller version of the American Flag adorns the nose corners. We are offering several versions of this paint scheme which have been spotted roaming the rails recently.
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 60ft Flat Car - OTTX/Brown Logo #97079
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO 100-Ton Open Hopper - Penn Central #480624
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
HO EMD SD9 - DCC & Sound - Burlington Northern #6237
Burlington Northern
- Former CBQ units (Phase IV, first time for a plastic model!)
- Correct 5-step, BN walkway
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
PS-2 2003 2-Bay Covered Hopper - Southern Pacific #401509
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
RS-18u, DCC Ready - CP Rail w/Multimark #1837
Era:1986-1998
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
HO Wet-Dry Grain Storage Bins (2pk) - Kit
DIMENSIONS:
Each: 3-5/8 x 3-5/8 x 12 inches (8.6 x 8.6 x 30.5cm)
Cornerstone Wet-Dry Grain Storage Bins are signature structures for modern grain-handling scenes. This HO structure kit includes parts for two tall, corrugated-metal structures, perfect for a small facility or as part of a larger complex. If your post-1960s railroad hauls grain, these grain storage bins will look great at any elevator!
- Parts for two complete bins
- Fine simulated corrugated metal details
- Realistic simulated steel supports and crossbraces
- Safety cage ladders
- One-piece roof
- Molded in appropriate colors
HO Chemical Tank Car - UP (3pk)
MODEL FEATURES:
- Separately applied brake wheel
- Wire form safety handrails
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Machined metal wheels with RP25 contours
- Highly-detailed, injection-molded body
- Minimum radius: 15 inch
- 3-packs feature unique road numbers
RS-18u, DCC & Sound - Ontario Southland #182
Era:2006-Present
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - KRRX #4713
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale GE ES44AC - DC - Canadian Pacific #8701
Model Features:
- Multiple body styles to reflect different as delivered railroad specifications
- Powerful five-pole KATO motor with dual brass flywheels
- Directional Headlight and illuminated, preprinted numberboards
- Illuminated ditch lights
- Kato magnetic knuckle coupler
- Drop in DCC compatible with the Train Control Systems K1D4 and Digitrax DN163K1C
Universal Rail Joiners - Code 55/80 - Nylon Insulating (12pcs)
HO FM H16-44, Standard DC, Canadian Pacific: Action Red Scheme No.8712
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
LED Bulb - Long/Standard Length 6.35mm (12)
HO GP38-2 - DCC/Sound - EMD Lease #813
EMDX FEATURES:
- Built as Penn Central
- Lighted class lights
- Lighted number boards
- Correct horn per road number
- Short fuel tank
- Sinclair antenna
ROAD NUMBER SPECIFIC FEATURES:
#788
- Ex-CR #7988
- mid phase w/ chicken wire grilles
- Operation Lifesaver
- Leslie 3-chime horn
- front small EMD plow
- rear Weed-cutter plow
- unique scheme
#813
- Ex-CR #8013
- mid phase w/ chicken wire grilles
- 4-stack exhaust
- Nathan 3-chime horn
- front small EMD plow
- rear Weed-cutter plow
- black fuel/air tanks
- small cab numbers
#825
- Ex-CR #8025
- mid phase w/ chicken wire grilles
- Nathan 3-chime horn
- front Weed-cutter plow
- maroon fuel/air tanks
- large cab numbers
- named The Kristen
GP38-2 SERIES LOCOMOTIVE FEATURES:
- Operating Class Lights
- Operating Number boards
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
Plastruct 91251 Clear Plastic Sheet .030 (3pcs pkg)
.030x7x12 inches
HO EMD SW1200 - DCC/Sound - Penn Central (ex NH) #9186
(Flexicoil Trucks)
Note: #9186 will NOT feature the larger Penn Central lettering on the hood.
The HO Scale Rapido SW1200 features:
- Designed from original blueprints and field measurements
- Heavy diecast frame, chassis and gearboxes for superior pulling power
- Rapidos renowned silky smooth-running drive system
- Working cab interior light and inspection lights
- Fully detailed Type A or Flexicoil trucks, as appropriate
- Full cab interior with working cab interior light and non-working fire extinguisher and fridge (where appropriate)
- Working headlights and illuminated number boards at both ends
- Some models have a rotary beacon or flasher/strobe as appropriate
- Separate handrails, including crash bars inside the cab
- Multiple exhaust stack and battery box door styles
- With or without working drop steps, as appropriate
- Incredible underbody piping and conduit detail - a Rapido hallmark!
- DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings from a 567 prime mover
HO Procor 3000CuFt Aluminum Hopper w/Handrails - UNPX/ Procor Wordmark #127280
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
Models depict in-service locomotives from the mid-1990s and beyond.
Road name and road number-specific painting and lettering.
Multiple road numbers offered.
New and improved high-torque motor and drive mechanism guarantees smooth operation.**
Operating radiator fans. Improved radiator fan drive unit with quieter operation and selective fan control.**
All-wheel power pickup and all-axle drive.
Heavy die-cast, zinc alloy chassis.
AuroraJanney scale head replica couplers installed.
NMRA RP-25 wheel contour with Code 110 tread width.
Minimum radius: 18? (recommended 22?)
* Lighting functionality is limited on DC models operating on DC track power.
** Improvement over our previously-released HO scale SD60F.
DC Version Features:
DCC ready with 21MTC connector.
Dual sugar-cube speakers (functional after installation of a DCC sound decoder).
Operates on DC track.
Burlington Northern #513955
Limited edition - one time run of these roadnumbers
Used to haul coal all across US
In service mid-1960s to mid-2000s
New die cast underframe
New sloped sheet braces
New updated brake gear
Correct 36 inch turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers
N Scale 4-Bay Cylindrical Grain Hopper - Potacan
Features include:
- NMRA profile wheels
- needle-point axles
- body-mounted E-Z Mate(R) Mark II couplers
20Ft Corrugated Containers with Corrugated Doors, Safmarine 2pk
482335(1) and 783218(4)
X-25 Mini Acrylic - Clear Green - 10mL Bottle
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or airbrushing. These paints can be used on styrene resins, Styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.
When airbrushing be certain to use any of the following Tamiya thinners: Items-81020, 81030, 81040, 81520, 87077.
Tamiya bottle paint label meanings and quick tips:
- X appointed colors have a glossy finish while XF designated colors are flat finish.
- The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
- Items 81521 and 81021 (Tamiya X-21 Flat Base) can be used as a flattening agent on Tamiya Gloss bottle paints. Simply add any X-gloss color then add flat base. Mixing ratio: 1:1
- The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
- For better paint brushing results use Tamiya Paint Retarder (item 87114) for a smoother brushstroke free finish.
N Scale Bettendorf Trucks w/ long ext. couplers (1pair)
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SSTX #2021
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO FM H16-44, With Sound & DCC, Canadian Pacific: Action Red Scheme No.8716
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO 40ft 16K Gallon Tank Car - Tru Sweet/UTLX #75845
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Alco FA-1 - DCC Ready - Canadian Pacific (Block Scheme) #4008
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
Tamiya America, Inc Tamiya Putty (Basic Type), TAM87053
Putty is designed for use with plastic models. Before curing it can also be thinned with Tamiya Lacquer Thinner.
Use for repairing plastic models. This putty can also be used for repairing and covering surfaces of metal and wooden models.
53ft Wabash Plate Trailer - Schneider #F45555
MODEL FEATURES:
Separately applied tractor-trailer, landing gear assembly, and mud flaps
Sliding rear bogie
Two or five hole painted wheels
Rubber tires
Sand shoes applied with removable glue
New tooling
Fully-assembled and ready to use out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
PRIMED FOR GRIME MODELS FEATURE:
-Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
-Patches applied and shaped per road number matching each corresponding side to the prototype
-Duplicated look and feel of In Service equipment - Tattered and Torn just like the real thing
-Some Prime for Grime models feature paint scheme variations
PROTOTYPE HISTORY:
Once the US Department of Transportation declaring that all national networks (US and Interstate highways) and all other networks within ten miles must allow the operation of 53-foot semitrailers without requiring special permits for length, the industry was quick to adopt the now-ubiquitous 53-foot vans. One of the first 53ft vans was the Wabash Plate Trailer in the late 1990s.
HO FCA 52ft 100-Ton Bulkhead Flatcar - CWLX #200065
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2016 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
N Scale 7 Wall Fans & 15 Wall Vents - Laser-Cut Wood Kit
HO Yard Utility Building - Kit
This kit is designed with cut lines on the back side of the walls so that the door and window locations are optional.
Dimensions:12 X 12 scale feet / 1-5/8 X 1-5/8 inches
42Ft Coil Steel Car - Norfolk Southern Protect III #165960
Features:
Prototypical painting and lettering
See-through walks
Removable hood
Inside floor detail
Cut-levers
Perfect for moving bulk loads of all kinds that dont require protection from the weather, the WalthersMainline 34ft 100-Ton Two-Bay Hopper is a versatile addition to HO operations!
One time run of these road numbers, order now - limited quantity available!
In service from the 1970s to the present
Used to haul ballast, sand, gravel, ore and other bulk loads
Factory-applied door and brake details
Heavy die-cast metal underframe
Add a realistic load in minutes with the cast resin Chooch Gravel Load (214-7292) sold separately
Correct 36in RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Laser Cut Structure - F.S. Jones Painting - Kit
Product Information
A Great Small Business for your HO Layout
F.S. Jones painting is typical of small wooden business buildings from the early 1900s. This detailed kit features a diminutive wooden structure, concrete loading dock and plenty of full-color signs.
Dimensions:
4-3/4 x 1-3/4inch (12.1 x 4.5cm)
#107 HO Scale Disconnect Log Car w/out logs Kit
Highly detailed logging equipment. Die-cast center beam, metal trucks, ribbed back wheels, log bunks and falling stakes. Comes with couplers. (without logs) One pair trucks
Master Craftsman Kit
Evergreen Scale Models - Opaque White Polystyrene H-Column .060In x 14In (4 pcs pkg)
HO CSX Diesels (1989-2002) Diesel - Blue, Grey, & Yellow Scheme - Decals
Circa: 1989-02
Scale: HO Scale
Equipment Type: Diesel - Blue, Grey, & Yellow Scheme (YN2)
Description: CSX Diesels (1989-2002) -Diesel - Blue, Grey, & Yellow Scheme- - Waterslide Decal - HO Scale
Whisker Scale Self-Centering Knuckle Couplers - Magne-Matic - Medium 9/32in Centerset Shank with #242 Draft Gear Boxes - 50 Pack
The #158 coupler will work anywhere a NO.5, #28, #38, #58, #118, #119 & #148 Coupler will work
This industry leading coupler features an all metal coupler head, shank, and Whisker centering spring. The #158 Magne-Matic Whisker Metal Coupler may be mounted with the #213, #232, #234, #242, #252, #262 Gearboxes (not included) or with other manufacturers cast-on coupler pockets.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.
High Self Adhesive Daffodil Tuft Strips - 4mm (10 strips)
10 4mm high self adhesive daffodil tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.
LOCOMOTIVE FEATURES:
CN “website†scheme
CN style plow
Correct trucks per road number
Forward and reverse ditch lights
Nathan K3L horn
#5606/#5617
Early EMD trucks
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
HO Pennsylvania Railroad G41A Repaint 1976 w/ Hoods PRR Shops G41A Coil Car
PRR G41A Delivery 1966 w/Hoods shows off the classic, as-delivered PRR Freight Car Red with those distinctive 1960s PRR Keystone logos on the hoods. PRR lettering is something that we like to get right, so feel free to pause and read all of those little lettering elements. We have duplicated the prototypes yellow paint masking for the hood guides and hood stacking brackets. These cars have such a distinctive look, from their rounded hoods to the extended cushioned draft gear and 125-Ton Trucks. Speaking of those hoods: Yes, they are removeable. Yes, they are stackable. Yes, you can even purchase extras. And since those hoods are removeable, we took extra care to paint the interior troughs and apply appropriate loading badges, trough data and centerline striping. Underneath the PRR G41A, you will find an accurate Hydroframe-60 Center-of-Car Cushioning system with Truck mounted brake hardware. The release rod even passes through the side of the car, just as you expect it to. The PRR G41A rides on Tangents new 125-Ton trucks with Truck mounted brake beam details and 38in wheels with rotating Timken bearings. SKUs -01 through -05 were built in 1-1966, and SKUs -06 through -12 were built in 2-1966.
Also, these cars look great loaded with our all-new coil loads sold separately!
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
HO RTR 55 F-100 Panel Truck - Police/Black
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
HO Code 83 Plastic Insulating Rail Joiners (24pcs)
Use Atlas HO Scale Code 83 Plastic Insulating Rail Joiners to join and electrically isolate sections of track. Joiners will work with any brand of Code 83 rail!
HO Hawker-Siddeley Van - Caboose - Canadian National - Late - (Black Steps) - #79223
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
87032 Masking Tape - 18mm
HO Ditch Lights - Late Style w/Lenses (2pk)
20-Piece High-Speed Steel Twist Drill Set
The Zona High Speed Steel Twist Drill Set includes a plastic dispenser with one each of high speed twist drills in wire gauge Nos. 61 p 80 (.025inch p .053inch). For use in small pin vise and other hand tools that hold wire gauges or in rotary tools with micro chucks.
N Scale Graffiti Decal Set - Modern Graffiti - Waterslide Decals
Scale: N Scale
Description: Modern Graffiti decal set. Add realism to your model railroad set with this Modern Graffiti decal set. Since the invention of the spray can it is all too common for railroad cars to have graffiti. The -artists- get to the cars faster than the railroad companies can clean it up! Many aspects of railroad scenery, such as buildings and billboards, also suffer from this. Featuring modern-style graffiti art in various sizes, this is the perfect choice for your modern railroad set.
HO 40Ft Refrigerated Container - ONE Set #2 (3 pkg)
Road Numbers: SZLU 9555316, SZLU 9563862, SZLU 9548908
(White/Pink)
MASTER MODEL FEATURES:
40-foot High-Cube Refrigerated Container
Composite materials sandwich-sides design
Detailed picture window refrigeration unit with separate parts
ISO Type 45R1
Five hinge / four bar doors with OUT style handles
Each set comes as a 3-pack
N Scale Long Barrel Ore Hopper - CN Mineral Brown #346558
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO Ground Throw Switch (2pk)
1953/68 Diamond T734 Tandem Tractor - Unpainted and Resin Cast Kit
HO 53ft Reefer Container - Cool Train
A cool addition to contemporary HO intermodal operations, the Scenemaster 53ft Reefer Container will look great on rails or roads!
Features include:
- All-new model!
- Prototypes now in domestic service across North America hauling perishable food products
- Highly detailed refrigeration unit
- Realistic body details
- Colorful, contemporary paint and lettering schemes
- Perfect loads for WalthersProto or WalthersMainline well cars (sold separately)
- Instant detail for terminals, highways and industrial scenes
- Fully assembled, ready to use
HO 36ft Chemical Tank Car - Ethyl/EBAX #6007
FEATURES:
- One-time run of these road numbers, order now, limited quantity available!
- Newly tooled tank with bolted jacket
- Perfect for steam- and diesel-era freight service
- Prototypes carried all types of chemicals between producers and end-users
- Small chemical/pressure dome
- See-through platform
- Correct 33 inch turned metal RP-25 wheelsets
- Proto MAX(TM) metal knuckle couplers
Trinity 3230 Covered Hopper - CIT Group/Capital Finance #95943
FEATURES:
All new tooling
Ready to run
Injection molded plastic
Fine scale detail
Separately applied wire grab irons
Separately applied wire cut levers
Etched metal roofwalks
Crisp painting and printing
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
HO EMD GP7 - DCC & Sound - Precision National PNC #1508
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
PNC FEATURES:
Different wheel bearing styles per prototype
Full skirts
1200-gallon fuel tanks
Sunshades
Cut levers
In the early 1970s Precision National was a one of the first companies that remanufactured diesel locomotives and then leased them out to railroads that needed them to bolster their fleets when they were power short. Their shops were located in Mount Vernon, IL which later on became the home for National Railway Equipment, a company that became a major supplier of leased and rebuilt diesels locomotives. PNC developed a uniform green and yellow paint scheme for their lease fleet that could be seen around the country.
ROAD NUMBER SPECIFIC FEATURES:
#1508 Front nose oscillating signal light (functions in DCC), spark arrestors, non-dynamic brake hatch
#4207 Foot board pilots, Dynamic brakes, Tall MU stands
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO GATC 4500 Covered Hopper - CRDX/ADM #4882
(ADM Blue Lease 9-1966)
- Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
- CNC-Machined 36 Inch Wheels
CRDX ADM Blue Lease 9-1966 is one of those schemes that defines the word sharp. ADM leased these cars from Chicago Freight Car Leasing Company (CRDX) and they were painted in a wonderful ADM dark blue with white graphics. These models duplicate the CRDX prototypes with Morton roof walkways and body mounted brake gear. Look closely at the bays, and you will notice the distinctive Wine Combo style outlet gates that allowed for either normal gravity unloading or low pressure air-assisted pneumatic unloading depending on the commodity. The B-end features an accurate Morton brake step and Ajax power brake. The low retainer valve is mounted near the air reservoir, just like the prototype. The black 100-ton Barber S-2 trucks have accurate rotating Timken bearing caps!
HO NSC 64 Ft 6000 Cubic Gondola HS - XRMX #2207
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO Trinity 3-Bay Hopper - KRIX (3pk) #1
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO PC&F 5241 CUFT - Boxcar - St. Lawrence & Atlantic (SLR) - Single Car #186
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
PRR X31A Double-Door Boxcar: Circle Keystone - Automobile - Single Car #69321
Detail Variations:
Built 1934-35, as operated to approx. 1954.
6-pack includes the following numbers:
#69005
#69177
#69308
#69321
#69379
#69402
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
1:32 ABS LADDER (2pcs)
Use as straight ladders commonly found in numerous industrial, commercial, and residential applications. Note, in most industrial applications using a fixed ladder, a cage is also desirable. See CL Safety Cage & Ladder Sets. Precision Injection Molded in Gray ABS Plastic.
Ideal for all outdoor or professional model construction where model life is critical.
SCALE
1:32
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/8In
HEIGHT IN MM
9.5mm
WIDTH IN INCHES
39/64In
WIDTH IN MM
15.5mm
LENGTH IN INCHES
15In
LENGTH IN MM
375mm
1 Amp N/HO Scale Mobile Decoder with Short 8 pin Harness
Fits Many N/HO Locomotives with 8 pin Medium Socket
- Size: .55 x .404 x .2 inch (13.9mm x 10.3mm x 5 mm)
- N/HO Scale
- Digitrax Easy Connect 8 Pin Harness
- 1.0 Amp/1.5 Amps Peak
- 3 FX3 Functions, 0.5 Amp
- FX3 Function outputs for prototypical lighting effects and on/off control:
- Constant Brightness Lighting with directional or independent control.
- Optimized selectable LED or incandescent lamp operation
- Realistic Effects like Ditch lights, Mars lights, strobes, and many more
- Configurable Pulse Function available on all function outputs.
- FX3 & Standard Function Qualifiers operate functions based on direction,
- F0 on or off, direction and F0, and whether loco is moving.
- Function Mapping for custom function setup.
- Master Light Switch turns off all lights & functions with one keystroke.
- Advanced Consist Function Controls.
- Digitrax LocoMotion® System - Your locomotives look like the real thing.
- The Digitrax LocoMotion System makes them run like the real thing, too!
- Scaleable Speed Stabilization (Back EMF) with simple setup & 256 level resolution.
- Torque Compensation.
- 128 Speed Step operation (14 or 28 steps can also be used).
- Momentum with acceleration and deceleration.
- Normal Direction of Travel is user selectable.
- Switching Speed feature for easier and faster access to yard speeds.
- 3 Step Speed Tables set start, mid and max voltage for custom control.
- 28 Step Speed Tables with 256 level resolution for precise control.
- Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.
- Digitrax Easy Connect 8 Pin Plug to 8 pin medium plug for Track, Motor and Function Control.
- 2 Digit and 4 Digit Addressing.
- Basic, Advanced & Universal Consisting.
- SuperSonic motor drive for silent operation.
- Direct mode programming.
- Decoder Reset CV with or without speed table reset.
- Transponder Equipped ready for transponding on your Layout.
- Motor Isolation Protection helps prevent damage to your decoder.
- Automatic Analog Mode Conversion when running on DC layout.
- Decoder Lock for individual programming of multiple decoders in one loco.
HO NSC 64 Ft 6000 Cubic Gondola HS - MWCX #102858
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO GE U50 Diesel - DCC & Sound - Santa Fe #1657
ETA: July 2023
Detailed Information
ATSF FEATURES:
Beacon (Flash function in DCC only)
Classification lights (Function in DCC only)
Working Truck lights
Number board lights
Separate see-through air intake grills
MU hoses
Our Legendary Liveries series seeks to explore the -what if- questions that some folks like to indulge in. Like many other railroads in the late 1950s and early 1960s Santa Fe was looking to push the envelope in locomotive horsepower by purchasing engines like EMDs 2400-horsepower SD24, Alcos 2400-horsepower RSD-15 and GEs new groundbreaking 2500-horsepower U25B in 1962. Might they have joined their western counterparts UP and SP and taken a gamble on the U50 too? We think that it looks sharp in Santa Fes dress blues.
U50 SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated classification lights
Illuminated number boards
See-through air intakes
4-cube speakers
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Four cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Talus - Coarse Brown (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings, and/or road cuts. Intermix grades and blend shades for the most realism. Color natural talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle talus and secure with scenic cement (#191).
Particle size - Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200080
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
HO NSC 64 Ft 6000 Cubic Gondola HS - TLPX/ Triple M Metals #2235
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO 54ft 23K Funnel-Flow Tank Car - ADM #25602
Add variety to your modern HO fleet with these WalthersProto replicas of the 54ft 23,000-Gallon Funnel-Flow Tank Car! Packed with details including the unique funnel-shaped body that speeds unloading on the prototypes, other features include:
- One time run of these roadnumbers, order now - limited quantity available!
- Introduced in the 1960s, still built and operated today
- Prototypes handle all types of petroleum and food products
- Etched metal walkways and platforms
- Factory-applied grab irons
- Brake train pipe and brake rigging underbody detail
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling metal axles and 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Tsunami 2 TSU-1100 Digital Sound Decoder for Steam Models
Dimensions: 27 by 10.5 by 5mm Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output) Function Outputs: 6
Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V
HO FMC 60ft Hi-Cube Ex-Post Boxcar - UP/Brown #560310
MODEL FEATURES:
- Single 10ft Youngstown door
- Separately applied grab irons, end ladders, and brake wheel
- Photo-etch coupler cross-over platform
- Highly-detailed, injection-molded body
- 36 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Minimum radius: 18 inches
Atlas HO 70000037 HO Code 100 Through Plate Girder Bridge Kit, Single Track Canadian National
Features
Girder measures 8 inches Long
Track piece measures 9 inches Long
Highly detailed
Prototypical bridge track
Easy assembly
- colour of ties - black
HO G43A Repaint 1980 Mill Gondola - Conrail (CR) #576127
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -G43A Repaint 1980- in the classic Conrail red paint scheme. This series represents the former PC-painted G43A series. Conrail retained the placards that were present on these original PC-painted cars from 12 years before. The Conrail reporting marks and road number are on the same three placards that PRR used, following the PC practices. Conrail then made new placards for the Conrail can opener logo and the two COTS panels, making a total of six placards on this model, on each side! The 100-Ton Barber S-2 trucks are equipped with rotating -Timken- caps and feature CR reporting marks and car number stenciling on the truck side frame, just like the prototype. This Conrail model is a true mill gondola, meaning it is not designated for coil steel loading; it has a steel floor. These Conrail mill gondolas feature details appropriate for the 1968-built car. SKUs 01 through 06 have a shop date of 5-80, while SKUs -07 through -12 feature an 8-80 shop date.
Alco RS-11 Conrail 7644 DCC & Sound
ESU LokSound Installed
The Rapido HO Scale RS-11 model features:
•Correct hood and roof profiles 3D scanned from the prototype
•Operating number boards, headlights and green and white class lights and cab control stand lighting
•Rapido innovative dead straight metal side handrails with plastic stanchions
•Roadname-specific details including steps, lights, equipment boxes, handrails, fuel tanks, air intake louvers and more!
•Full underbody piping, conduits and steam lines, where appropriate
•Correct roadname-specific corner steps
•Separate grab irons and wire handrails installed at the factory
•Heavy, die-cast chassis and full, multi-colour/color interior
•Rapido proven 5-pole skew-wound motor with dual flywheels and silky-smooth drive
•DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound)
•Accurate sounds recorded from a real Alco 251B prime mover
•Factory-installed Macdonald-Cartier couplers mounted at the correct height
HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - Santa Fe (ATSF) #350037
Product Information
Serve a wide range of HO industries with the 37ft 2980 Cubic-Foot Two-Bay Covered Hoppers from WalthersMainline. Based on prototypes introduced in the late 1980s, they can be found hauling cement, fracking sand, roofing granules and similar loads. Features of the layout-ready models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from late 1980s to the present
Separately molded and applied hopper gates
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
Acrylic Flat Colors - Flat Red - 3/4oz (23mL) Bottle
XF-7
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
Evans X72A Box car: Conrail w/ Small Logo - Single Car #299844
Detail Variations:
As operated between 1976 to the 1990s.
6-pack includes the following numbers:
#229023
#229199
#229328
#229377
#229493
#229844
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
Evergreen Scale Models 9009 - .005in Plain Opaque White Polystyrene Sheet (3 Sheets)
6in x 12in SHEET
HO Diesel Detail Kit for Alco PA-PB
Product Information
Make your WalthersMainline locos even more realistic in minutes with this Diesel Detail Kit! The complete set of HO grab irons fits the standard locations on the model, and theyre made of durable, factory-formed stainless steel wire. This 14-piece set includes a complete set of standard grab irons and lift rings to upgrade one Alco PA or PB unit including:
2 pilot grabs for PA
2 right rear grab irons for PA/PB
2 left rear grab irons for PA/PB
8 Alco-style lift rings
Illustrated instructions
HO GMD SD40-2f - DCC Ready - CP Rail #9006
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO Crossing Flashers - Set of 2 Working Signals
Product Information
Make HO Scale highways safer and more realistic with these working models from SceneMaster featuring:
Two US-style crossbucks with forward-facing LEDs
Fits layouts from the 1960s to the present
Fully-assembled for easy installation in new or existing scenes
Operate with Grade Crossing Signal Controller #949-4359 (sold separately)
HO Scale Branchline 3 32 2mm Thick 1-9 16 Top Width 1-7 8 Base Width 25 Roll
N Scale 33 Inch Metal wheel Set - 8/pkg
HO Scale GP38 - DCC & Sound - Santa Fe (Yellow Warbonnet w/o Class Lights) #2329
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
N Scale Grain Elevator w/Ladders and Platforms
Two-60ft or one-120ft Elevator(s).
Rix Products N Scale Grain Elevator. This elevator represents the style of elevator used all over the country at farms and industries. The Rix N Scale Grain Elevator offers a highly detailed elevator with ladders, platforms and distribution box. The Grain Elevator can be built in 30 foot increments up to any height you wish. Color matches galvanized metal. Grain bins not included.
TRACK RUST PIGMENT
Ultrafine high quality pigment for modelling.
The definitive collection of pigments designed exclusively for modelers. A series of basic necessary and frequently used colors mixable between. AK Interactive pigments are much finer than any of the existing products on the market and contain nearly 3 times the quantity of other leading brands at a lower price .These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve. Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.
HO McGraw Oil Company - Kit
Storage Tanks: 6-1/2 x 6-1/2 x 5 inches
Pump houses: 2-3/8 x 5-1/2 x 3 inches
FEATURES:
- Fits to 1930s to the 1970s
- Realistic brick office and pump house
- Arrange to fit available space on your layout
- Includes loading rack with piping
- Four steel storage tanks with retention berm
- Decal signs for several business names
- Molded in appropriate colors
HO Trinity 3-Bay Hopper - NS (3pk) #1
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
Ballast Bag - Medium Gray (21.6 in3)
Realistically model railroad track, crushed rock and stones.
Easy to use and colorfast.
HO RTR 68Ft Bulkhead Flatcar - Canadian National CN #622409
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
Double Clip, Extra Hands w/Magnifier
Extra hands is designed to assist in holding of objects leaving hands free to work on projects while also providing magnify glass to gain more sight of object. Weighted base assists in precise positioning of objects with alligator clamps attached to ball joints for holding at any angle. Multiple adjustable points of positioning to ensure full movement of object.
Used on: paper, cardstock, stencils, film, photographs, tape, plastic, wood, cloth, leather, cardboard, cricut, cork, vinyl, foam boards, and most other light-weight crafting.
Used for: holding and stabilizing during bookscraping, model making, wood carving, professional experiments, school projects, and crafting.
Used by : graphic designers, hobbyists, students, teachers, wood workers, model makers, scrapbookers, quillers, and crafters; and general art purposes.
North American-Style Code 100 Inspection Pit
Perfect for use in loco servicing scenes, roundhouses, engine houses and more. Includes pit, Code 83 rail and details.
Total Length 11.7in 297mm long
Penn Central in the Conrail Era - Volume 5: 1995-1999
Author: Stephen M. Timko
Released: June 1, 2021
Hardcover, 128 Pages
The final look, year by year, at former Penn Central property under Conrail ownership from 1995-1999. Featuring a chapter on former Penn Central motive power, equipment, and structures.
Brass Strip - 12inch x 1/2inch x .032inch
Length: 12inch
Width: 1/2inch
Thickness:0.032inch
1947-55 32Ft Fruehauf Aerovan w/ Mayflower Decals - Unpainted and Resin Cast Kit
N Scale Urban Steel Overpass - Kit
With Angled Wing Walls: 7-1/4 x 5-1/2 x 1-13/16 inches (18. 5 x 14 x 4.5cm)
With Straight Wing Walls: 5-15/16 x 6-1/2 x 1-13/16 inches (15 x 16.3 x 4.5cm)
Combine roads and rails easily in N Scale scenes with the Cornerstone Urban Steel Overpass kit. This highly detailed structure is typical of common designs in use from the 1900s on as increasing auto traffic made replacement of grade crossings a better option, and many are still in use today. A realistic addition to commercial, industrial or residential areas!
FEATURES:
- Builds double-track railroad ballasted-deck bridge with two-lane roadway below
- Scale 15ft 6 inch (4.7m) overhead clearance between roadway and bridge deck side girders
- Highly detailed girders, beams and columns with scale rivets molded in medium gray
- Separate wing walls can be installed to fit straight or angled installations
NixTrainz Decoder Buddy V5
The V5 has 12 Aux outputs for lights. Twelve are present on the small connector board and two are paired to the motherboard and associated with the frame. The track and speaker pads stayed the same size. The pads on the small connector board got a little smaller. These pads are all separated and have holes to help hold the wires. The stay alive pads moved to the other side of the motherboard out from under the decoder and are in an easy place to solder to like the original. From a little closer to the situation than I used to be, I might say a Steam / Diesel split might align with the two Decoder Buddys as well as a 1997 date split between the two due to ditch light requirements by the FRA. Both are exactly the same size. You get to make the choice! Fortunately both Decoder Buddys have been accepted by both installers and modelers.
HO ALCo RS-3, Phase 3 - DCC/Sound - Boston & Maine #1512
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- fuel tank
- can motor
- flywheels
- blackened wheels with RP25 flanges and knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound V5 decoder
Light Gun Metal Mini Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO Scale 85 ACF 48-Seat Diner - Union Pacific 302 Overland (Heritage Fleet; Armour Yellow, gray, red)
In response to many requests, Walthers is pleased to announce HO models of the historic Union Pacific train honoring the late President George H. W. Bush, which will include a WalthersMainline SD70ACe 4141, and select WalthersProto cars from the Heritage Fleet. Each car comes fully assembled for operation or display, with a variety of features as noted below. Perfect for fan trips and special events behind 4141 and other UP power
First time with factory-printed UPP numbers and car names
Baggage car includes full-color Presidential Seal decal
Finished in modern-era UP excursion scheme
Factory-installed grab irons
Prototypically accurate window tinting as appropriate
Delivered as a lunch counter cafe and lounge in 1949, car 5015 was later held for special service. Rebuilt as a custom 36-seat diner in 1988 with round tables, it received a new wood interior decor in 2005. Named in honor of the original Overland Flyer, which ran from 1887 to 1890 when it was replaced by the Overland Limited, and UP also advertised itself as as the Overland Route for many years.
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24inch radius is recommended for operation.
HO Enterprise 2-Bay Covered Hopper - Canadian National (MOW Grey) (3pkg) #1
3-Pack includes the following numbers, all individually packaged: #53307, #53308, #53351
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15306
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Evergreen Scale Models 3035 .035in Opaque White Polystyrene Passenger Car Siding (1sheet)
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - MRRX #4814
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Birch Plywood Sheet - 12 x 24inch x 1/64inch Thick - Single Piece
Perfect for painting, staining, stenciling and wood burning
Cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use
1/64inch (.0156inch) Thick x 12 x 24inch (30.4 x 60.9cm)
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov
HO GATC 2600 Airslide Hopper - Rock Island #8525
MODEL FEATURES:
- Three different body styles
- Rectangular or oval shaker brackets
- See-through metal roof walk
- Highly detailed, injection molded body
- Fully-assembled and ready-to-run out of the box
- Detailed underbody including outlet piping
- Gravity or gravity-pneumatic outlets
- Roller bearing or Bettendorf trucks
- Factory installed wire grab irons and brake piping
- Coupler cut levers and train air lines
- Machined metal wheels
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Operates on all popular brands of track
- Minimum radius: 18 inch
HO 40Ft PS-1 Boxcar - Ann Arbor (Direct Route) #1409
Date: BLT 4-57
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
Road Number Specific Details:
#1401, 1405, 1406
Have Pullman 8Ft Raised Panel Door
#1402, 1404, 1409
Have Pullman 8Ft Corrugated Door
HO 19,600 Gallon Tank Car - GATX (MCP) #73607
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Date: BLT 3-98
Finishing Enamel - Fluorescent Blue - Bottle (1/4oz)
1:87 2020 Proterra Catalyst Electric Bus - MTA New York City
By Awesome Diecast
DUPX #14797
FREIGHT CAR FEATURES:
New road numbers
Highly detailed, injection-molded body
Two different body phases (early and late)
Different top platforms as appropriate per prototype
Different brake systems as appropriate per prototype
Many separately applied details
Etched metal walkways
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Minimum radius: 18in
Recommended radius: 22in
GENESIS FREIGHT CAR FEATURES:
Fully-assembled and ready-to-run out of the box
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Trucks with animated rotating bearing caps
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted, McHenry scale double-shelf knuckle couplers
Multiple road numbers
Window packaging for easy viewing, plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Walthers Layout Control System - Single Color LED Fascia Indicator (Green)
Works for HO, N, Z, S, and O Scales
This 21st century approach to turnout control uses servo-based components, and features color-coded plug-and-play wiring to eliminate cutting and soldering. The heart of the system is the fully assembled Switch Machine that has a low current draw and comes with great features including an integrated DCC accessory decoder, as well as user-selectable options for quick and easy customizing.
HO EMD GP40 - DCC Ready - Wisconsin Central #3023
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
F30A 50Ft Flat Car: Penn Central - 6(pkg)
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
6-pack includes the following numbers, all individually packaged:
#701096
#701482
#701550
#701832
#701987
#702058
HO 40ft Corrugated HC Container - ONE (3/pkg) Set 1
MODEL FEATURES:
-Factory assembled with many detail parts applied
-Three different road numbers per pack
-Some SKUs feature multiple logos and/or decoration variations
PROTOTYPE AND BACKGROUND INFO:
An intermodal container is a large standardized shipping container, designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport from ship to rail to truck without unloading and reloading their cargo. Forty-five foot containers such as this model are commonly used in situations where increased capacity is needed. Corrugating the sheet metal used for the sides and roof contributes significantly to the containers rigidity and stacking strength, just like in corrugated iron or in cardboard boxes. International (ISO) containers have castings with openings for twist lock fasteners at each of the eight corners, to allow gripping the box from above, below, or the side, and they can be stacked up to ten units high for storage.
N Scale Hot Air Balloon - Kit
DIMENSIONS:
9.7cm Diameter, 13.5cm Tall
HO 1950s Sedan - Yellow
MODEL FEATURES:
- Factory assembled with detail parts applied
- Molded interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
- Beacon or taxi sign where appropriate
N Scale AutoFlood III RD Coal Hopper - CEFX: Single Car, INRD 2,000,000TH Car Load Special #600480
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO RTR ACF 4650 3-Bay Hopper - Western Pacific #11793
(Feather Logo)
Date: BLT 5-82
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
EMD/Blue #1203 - DCC Ready
EMD Demo/Lease -Blue
Leader PTC Antenna Array
New feature: Water sight glass
SD70ACe AND SD70M-2 SPECIFIC FEATURES
Correctly-sized operating ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or -tube- style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Standard grille or Canadian-style -louver- dynamic brake intakes
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Different jacking pads
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
New version HTCR or HTSC trucks
Non-sound QuickPlug equipped with NMRA 8-pin and 9-pin DCC plugs
McHenry scale knuckle spring couplers
Minimum radius: 18inch
Recommended radius: 22inch
HO Rotary Snowplow & F7B Locomotive - DCC Ready - Northern Pacific NP #42/#42-B
ROTARY SNOWPLOW FEATURES:
Electrically driven motor to operate the rotary blades
Clear plastic cab and/or portal windows
McHenry operating scale knuckle couplers on rear of the snowplow
Highly-detailed, injection-molded body
Fully-assembled and ready-to-run out of the box
Painted and printed for realistic decoration
Highly-detailed, injection-molded body
Minimum radius: 18inch
Recommended radius: 22inch
F7B LOCOMOTIVE FEATURES:
5-pole motor with precision-machined flywheels and multi-link drive train for trouble-free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Heavy die-cast frame for greater traction and more pulling power
Clear plastic portal windows
McHenry operating scale knuckle couplers
DCC Ready 21 pin plug
Machined metal wheels with RP25 contours
Fully-assembled and ready-to-run out of the box
Painted and printed for realistic decoration
Highly-detailed, injection-molded body
Minimum radius: 18inch
Recommended radius: 22inch
HO Bi-Level Auto Rack - Transportación Ferroviaria Mexicana (TFM)/TTGX Flat Car #995949
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO 50Ft PCF B70 Boxcar - w/ Superior Doors - Canadian National #555007
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
HO MP15AC - DCC & Sound - CSX #1180
Detailed Information
CSX FEATURES:
Early YN3 repaints
Operating front and rear ditch lights
Timken bearing caps
Horn style per road number
CSX operates a large group of MP15ACs of L&N and SCL heritage. Many have been repainted into the -YN3- scheme of dark blue and yellow.
ROAD NUMBER SPECIFIC FEATURES:
#1161
RV style air conditioner
#1179
Strobe lights
spare coupler knuckles on rear pilot
#1180
CSX angled-style ditch lights on rear
spare coupler knuckles on rear pilot
LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Windshield wipers
Lift rings
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
NEW FEATURES:
Operating ditch lights (if equipped)
Operating ground lights
Newly designed motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Excellent low-speed operation
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Evergreen Scale Models 118 Opaque White Polystyrene Strips 14in .015x.188 (10pcs pkg)
HO 60ft Bulkhead Flatcar - MILW #67231
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
HO Concession Trailer - Pop-Tastic Popcorn
HO SP 3/4 Dome-Lounge w/Flat Sides - Southern Pacific (General Service) #3603
-Overland Style
Rapidos SP Dome Lounge Cars Features:
Designed from original blueprints and field measurements of existing cars
Two fully-detailed interior configurations
Multi-colour interior decoration
Two underbody arrangements
Accurate interior and exterior paint and decoration
Full flicker-free track-powered interior lighting
Lighting (prototypically) in the dome roof
Accurate free-rolling trucks
Metal magnetic knuckle couplers
Model Master - Enamel Thinners - Clear
1.75oz/ 51.8mL bottle
VIA Rail HEP 1 (1998 to Present)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
40Ft Corrugated Container Ocean Network Express 2pk
TLLU #607537(0) UETU #407554(5)
Motorizing Kit Fits Swing Bridge, Oil Pumps, Turntable & Other Kits (All Sold Separately)
Animate your models in minutes with this fully-assembled drive. It features a drop-in mount for Walthers Double Track Swing Bridge (933-3088) and 90 Ft Turntable Kit (933-3171) as well as the Walking Beam Oil Pumps in HO (933-3170) or N Scale (933-3248), all sold separately. The kit can easily be adapted to other models. It is complete with a rugged motor and has 360:1 gearing to insure smooth, slow speeds.
Downtown Deco HO 1064 Chop Suey Take Out
This miniscule structure will fit just about anywhere on your layout and while it is small in stature, it more than makes up for it in character.
Every detail of the old brick walls is captured form the cracks and chips to the mortar and patching.
This is the perfect kit for those who love the look oh hydrocal kits but were always afraid to try one.
included are highly detailed hydrocal castings, plastic doors, full color signs and most importantly: complete easy to understand assembly, painting, and weathering instructions.
1 1/2 in by 4 in
HO Norfolk Southern G41A Repaint 1976 w/o Hoods PRR Shops G41A Coil Car
NS GP67 Repaint 2005+ is an exciting release for us. NS rebuilt some of their G41A cars around 2000 and placed them in the GP67 class. These rebuilds were changed from 6 troughs to 5 troughs to accommodate larger diameter coils. This major change, along with yellow trough bracing, makes these cars really stand out in the crowd. The Tangent offering picks up in 2005+, where the NS cars have received their conspicuity stripes. The troughs received not-so-subtle wide white stripes down the centerline of the car to assist loading. If you read the data carefully, you will find accurate 50 Year Life Extension stenciling and painted diamonds labeling the cars for HOT steel coil service. The 125-Ton trucks feature NS reporting mark and car numbers along with 38in wheels and rotating Timken caps. These are some HOT cars for the modern era.
SPECIFICATIONS:
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
HO F7A EMD - DCC & Sound - Bessemer & Lake Erie/Freight #721A
B&LE UNITS FEATURE:
- First time in Genesis for later BLE orange & black scheme
- Back-up lights
- Winterization hatch
- Nathan M3 horn (A-units) / Leslie A-125 horn (B-unit)
- A-Units: Whip antenna, cab vent, nose side grab irons
LOCOMOTIVE FEATURES:
- Full cab interior
- Wire grab irons
- Coupler cut levers
- See-through cab windows
- Flexible rubber trainline hose
- Flexible rubber MU hoses
- Windshield wipers
- Lift rings
- Blomberg-B trucks
- Sander lines
- Directional constant lighting
- Headlight brightness remains constant
- Separately applied photo etched metal and injection molded detail parts
- Detailed fuel tank with fuel fillers, fuel gauges, breather pipes & retention tanks
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Accurately-painted and printed paint schemes
- McHenry scale knuckle couplers - Kadee compatible
- Fully-assembled and ready-to-run
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
- Replacement parts available
- Minimum radius: 18 inches
- Recommended radius: 22 inches
SOUND EQUPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Individual sound boards installed in both A and B units (sound units only)
- Engine, horn, and bell sounds work in DC
- Some functions are limited in DC
- All functions NMRA compatible in DCC mode
- Excellent low-speed operation
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Lighting effects such as beacons, Gyralight where prototypically accurate
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
4785 PS2-CD Covered Hopper - Early End Frame - Conrail - Gray Quality Logo #886874
HO Peterbilt 389 Sleeper Cab Tractor w/Pneumatic Bulk Trailer - First Class Services
(red, white, chrome)
HO NSC 3294 Mechanical Reefer - CP Rail (Multimark Repaint) #287229
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
HO - 40ft Ribbed 3-bay Ballast Hopper - New York Central- #950004
Removable load
Separately applied wire grab irons and brake wheel
Solid nickel silver wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
Flat Brushable Acrylic - Seasoned Brown Wood - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
GP7 Diesel, A+B Sets, w/ DCC & Sound - ATSF Zebra Stripe #2791/2791A
Era: 1950s+
ATSF FEATURES:
Forward and Rear facing single chime horns on A units only
Dynamic brakes
-Canvas- sunshades (A units)
Fuel tank skirts with rounded cutouts
Intricate -Zebra Stripe- paint scheme
LOCOMOTIVE FEATURES:
Trainline and MU hoses
Coupler cut levers
Drop steps unless noted
MU stands
-Nub- style walkway tread
Bell placement & type per prototype
Fine-scale handrails for scale appearance
Wire grab irons
Lift rings
Windshield wipers
See through cab windows and full cab interior
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Sander lines
Speed recorder unless noted
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Body mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Replacement parts available
Minimum radius: 18In
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included
PROTOTYPE INFO:
In 1949, EMD introduced the GP7. The basic design followed most diesel switchers with the addition of a short hood instead of an end-cab. The hoods were also full height to better accommodate the diesel engine and mechanical and electrical components.
In 1954 EMD upgraded the GP7 to become the 1,750 horsepower GP9. Externally, the first GP9s were virtually unchanged from the last GP7s. Later versions would include different louver arrangements and the last ones would come without the frame skirting. The GP9 was available with all of the fuel tank, steam generator, and dynamic brake options as the GP7, including -torpedo tube- air tanks mounted on the roof.
Many railroads chose to rebuild their GP7s and GP9s for continued service. Often times, it was cheaper to do this rather than purchasing brand-new locomotives.
HO PS-2 2893 3-Bay Covered Hopper - Chessie C&O #2063
MODEL FEATURES:
Separately applied round roof hatches
Photo-etched metal roof walk
Factory applied wire grab irons
Detailed outlets
Separate brake cylinder, valve, and air reservoir with wire brake plumbing
Weighted for optimum performance
33inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Minimum radius: 18inch
HO Enterprise 2-Bay Covered Hopper - Canadian National (MOW Red) #53317
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO Scale G2 SD90MAC Diesel - DCC & Sound - Indiana Railroad #9004
Detailed Information
INRD FEATURES:
Former CEFX units; major spotting featured remain
#9025 features special -warbonnet- 25th Anniversary paint
EOTD above left rear of fuel tank
Indiana Railroad has 15 SD90MACs on long term lease from CIT group. 4 of the 10 units sent to NS from CIT group came from INRD. Currently the fleet wears the attractive red & white scheme applied to most Indiana Railroad units, while #9025 wears a special -25th Anniversary- paint.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO RTR 85Ft Budd Big Dome Bar Lounge Dormitory - Lighted - Santa Fe #60
Business Train (Real Metal Finish)
Lighted
Product Information
Modeling one of Santa Fes most unique cars is easy with the 85Ft Budd Big Dome Bar Lounge Dormitory! Tailor-made for enjoying trackside scenery, the glass-enclosed upper deck offered superb views for 57 passengers in coach seats, with 18 additional lounge seats. The lower level provided an additional small lounge area, along with dormitory space for 12 crewmen. Ready for operation or display, features of this WalthersProto replica include:
Real metal finish simulates stainless steel
Factory-installed grab irons
Prototypically accurate window tinting
Window gasket details as appropriate
Sprung operating diaphragms
Modeler-installed extended drawbars for 22Inch radius curves included
Turned metal RP-25 wheelsets and correct trucks with built-in electrical contacts
Proto MAX metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24Inch radius is recommended for operation.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #33
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO 50ft Covered Gondola - RI #3833
MODEL FEATURES:
- 70-ton Roller Bearing trucks
- Removable cover
- Separately-applied brake wheel
- Weighted for optimum performance
- 33 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Body-mounted McHenry operating scale knuckle couplers
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inch
PROTOTYPE AND BACKGROUND INFO:
Gondolas are low-sided railroad cars that are used for hauling bulky loads that don not need protection from the weather. The Roundhouse 50ft gondola is representative of larger cars that began appearing on the rails in the early 1950s, and many survive today working for modern roads and contractors.
Spray Can - Field Gray #2 (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO GP40 - Gold DCC & Sound - Penn Central #3144
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
HO FMC 60ft Hi-Cube Ex-Post Boxcar - CP Rail/MILW #620
MODEL FEATURES:
- Single 10ft Youngstown door
- Separately applied grab irons, end ladders, and brake wheel
- Photo-etch coupler cross-over platform
- Highly-detailed, injection-molded body
- 36 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Minimum radius: 18 inches
Juneco Scale Models Diesel Loco Snow Plow
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Pennsylvania Rack, Trailer Train Flatcar (TTBX) #930036
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20218
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Atlas Trainman HO
2 Bay Off set Hopper with Flat Ends Canadian Pacific #357093