HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Orange) #506705
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
HO Single BiLevel Commuter Car - Undecorated Coach - Series 3 Body
Note: Unnumbered coaches do not include decals. Decals are available from Highball Graphics.
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO - 24Ft Ribbed Ore Car w/Load - B&LE (4 pkg) #3
Detailed Information
MODEL FEATURES:
Removable load
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied brake wheel
Machined metal wheels
Weighted for trouble free operation
Solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 15inch
PROTOTYPE AND BACKGROUND INFO:
Iron ore is a rock from which metallic iron can be extracted. About 98percent of the mined iron ore is used to make steel. Many railroads around the great lakes have unit trains that transport mined iron ore to transport via barge for processing. These trains are very distinctive with train sets of small cars carrying very heavy loads of dense iron ore.
HO Wrapped Lumber Load for 72ft Centerbeam Flatcar - Nakina Lumber
(blue)
Put your railroad to work moving these Walthers SceneMaster Wrapped Lumber Loads from sawmills to local building suppliers. Made especially for the HO Walthers Mainline 72ft Centerbeam Flatcars (#910-4800 series, each sold separately) and adaptable to most cars with a similar interior length, each is pre-painted and lettered in authentic schemes, and snaps easily onto the car to add realistic detail in a matter of minutes!
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AWWX #4618
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO VIA HEP2 Coach: Painted, Unlettered
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #677023
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .040In x 6In x 12In (2 pcs pkg)
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - Pennsylvania Railroad PRR Rack/ Trailer-Train Flatcar #908124
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO 53ft Railgon Gondola - Baltimore & Ohio #350169
(patch; black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Two-Car Garage - Kit
3-1/8 x 3-1/8 x 2inch (7.9 x 7.9 x 5cm) over eaves
Perfect for any suburban scene from the 1950s to the present the new HO Cornerstone Two-Car Garage looks great alongside city or country homes. Features of this detailed structure kit include:
Easy upgrade for older or newer homes from the 1950s to the present
Customize in minutes - build with one large or two small overhead doors - both included!
Detailed interior wall framing
Separate entry door and small windows
Evergreen Scale Models 2125 .125in Opaque White Polystyrene V Groove Siding (1 Sheet)
.020in (.50mm)THICK X .125in( 3.2mm) GROOVE SPACING X .021in (.53mm) GROOVE WIDTH. GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
6in X 12in
NYC Cab Signal Box - Unpainted
Commonly used on passenger service RS-3s.
N Scale AutoFlood III RD Coal Hopper - CEFX #600441
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
Cement Ready Mixer Truck
PS-2 2003 2-Bay Covered Hopper - Chicago & North Western #95312
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
Evans X72A Box car: Conrail w/ Small Logo - Single Car #229199
Detail Variations:
As operated between 1976 to the 1990s.
6-pack includes the following numbers:
#229023
#229199
#229328
#229377
#229493
#229844
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
HO Traffic Light - Double Sided
FEATURES:
- Long-lasting LEDs
- Makes model street scenes more realistic
- Common North American-style traffic signal as used in many communities
- Fits popular modeling eras
- Great detail for day or night scenes
- Fully assembled from tough metal parts
- Install in minutes in new or existing scenery
- Color-coded wiring
- Operate with Traffic Light Controller (949-4389 sold separately)
Expand container traffic on your 1960s and 70s era HO layout with this series of authentic models from - SceneMaster, featuring:
- Standard end-door and right-side door versions as appropriate
- Authentic rivet, door latch and hinge details
- Colorful period schemes
- Perfect period loads for WalthersMainline G85 and 60ft Pullman-Standard VTTX container flatcars (each sold separately)
HO NSC Ballast Hopper - BC Rail (Early) #2837
1977+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO 70 Ton 13 Panel 3-Bay Hopper Car - Penn Central (H37B) #459255
Ready to Run.
Features:
Crisp details and sharp painting and printing,
metal wheels and knuckle couplers.
HO Trinity 3-Bay Hopper - GCCX #81072
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
N Scale Laser-Cut 2-Lane Curved Wood Grade Crossing - 9-11in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights.
HO AutoFlood III RD Coal Hopper - PGNX #1180
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO Chemical Tank Car - Sol-U-Phos #207
MODEL FEATURES:
- Separately applied brake wheel
- Wire form safety handrails
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Machined metal wheels with RP25 contours
- Highly-detailed, injection-molded body
- Minimum radius: 15 inch
- 3-packs feature unique road numbers
Spray Can - Base White (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 10 Inch Track Alignment Gauges - Curved - 26 Inch Radius
RibbonRail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking, and joining rail. Track Alignment Gauges are precision machined to NMRA standards and will work on any code of HO Scale rail. Available in many curve radii as well as straight.
HO Pressureaide Covered Hopper - ACFX (Orange Sill Venturi) #59914
(white, blue, orange, Venturi)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.02 (10pcs pkg)
Athearn HO Scale - Power Truck/ Triple Clasp, SD/38/40/45
pkg of 1
HO GP9RM - DCC Ready - Canadian National (Stripes) #4110
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO SD75M - DCC Ready - Santa Fe BNSF #249
Detailed Information
BNSF FEATURES:
Faded paint colors
Small EMD plow
Round deck mounted front ditch lights
Large Sinclair antenna
Early EMD trucks with hidden bearings
Road number specific details and artwork
Part of the original Santa Fe 1994 order, these SD75Ms are depicted as late in their life. Just before they were sold to PRLX, they soldered on looking beaten and battered, but still earning revenue for their owner. Renumbered to the 8200 class in the 2000s, they eventually returned back to their original Santa Fe numbers again, but with BNSF patches.
ROAD NUMBER SPECIFIC FEATURES:
#226
Ex-ATSF 226
small cab numbers
added rear number boards
yellow frame stripes
#231
Ex-ATSF 231
large cab numbers
yellow frame stripes
#249
Ex ATSF 249
large cab numbers
yellow frame stripes
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
Evergreen Scale Models 9903 - .010in Green Transparent Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
HO AutoScenes - Thompsons Traveling Trailer
The Thompsons are headed out for places unknown.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
HO 52Ft Mill Gondola - Norfolk Southern NS #200358
NEW FEATURES:
Refined end-sheet molded-on details
Improved rivet and bolt details
Corrected wire grab-iron placements
New top-chord details
New jack reinforcement pad details
New coupler cut lever mounting details
MODEL FEATURES:
Separately applied wire grab irons
Body-mounted McHenry operating scale knuckle couplers
33inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
Brass Strip - 12inch x 1/4inch x .064inch
Length: 12inch
Width: 1/4inch
Thickness:0.064inch
HO Value Line RTR - 13 Panel Coalporter - Conrail #503077
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Highway Guardrail (3 Pack)
Highway Guardrail (3 Pack) Each guardrail is 25-1/2 scale feet or 3-1/2 inches long and a combined length of 76-1/2 scale feet or 10-1/2 inches long.
N Scale Value Line RTR - AeroFlo Coal Gondola - Canadian National (pkg 6) #2
-A02 Road Numbers: 194130, 194132, 194135, 194186, 194193, 194219
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) (6pkg) #2
Road Numbers Included: 286298, 286311, 286333, 286359, 286388, 286413
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
HO RTR 70 Ton 2 Ballast Hopper w/ Side Chutes - Reading & Northern #107
Product Information
Perfect for work train service on our railroad, Bowser HO Scale ready-to-run 70-Ton 2-Bay Ballast Hoppers with Side Chutes (Ballast Gates) feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make these 70-Ton Ballast Hoppers welcome additions to any diesel-era freight train consist.
HO NSC 64 Ft 6000 Cubic Gondola HS - Data Only (Has AIMX Features) - No Road Number
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
1/32 inch OD Round Brass Tube - 0.006inch Thick x 12inch Long
Round Brass Tube 0.006inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 1/32 inch
Gunderson Maxi III Well Car (5-Unit Set) - Southern Pacific #513827
MODEL FEATURES:
- Fully assembled and ready for your layout
- Weighted for optimum performance
- Razor sharp painting and printing
- Prototypically correct 33 and 38 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Body mounted McHenry operating scale knuckle couplers
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- Replacement parts available
- Minimum radius: 18 inches
Acrylic Paint - B&M Blue (1oz)
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 70-Ton 12-Panel Hopper - Chesapeake & Ohio #151633
Blt.3-63
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO 45Ft Trailmobile Dry-Van Trailer w/Side Door - Caravan Leasing #121637
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
EMD #8001
EMD SD80MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Models equipped with marker lights will be illuminated
Rubber MU hoses for durability
All New Tooling
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
See through steps
Illuminated ground lights
Front and Rear Illuminated Numberboards
Presenting EMDs 5,000HP 6-axle diesel in a whole new level of authenticity. Starting in 1995, EMD revived the 20 cylinder engine design, last seen in the SD45, and introduced the 5,000 HP SD80MAC. Athearn is pleased to announce this locomotive in Genesis 2.0.
EMD FEATURES:
Illuminated front and rear red marker lights
Illuminated Ditchlights alternately flash per prototype w/ effect on DCC+Sound version
Three–panel dynamic intake per EMD prototype
LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE:
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO USRA Single-Sheathed Boxcar: B&O
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Scale G2 AC4400CW - DCC & Sound - Chicago & North Western #8831
CNW FEATURES:
Holden K5H Horn
Early body features
Desk style control stand
Fuel tank without notch
Unevenly spaced rear grab irons
Front ditch lights
Fuel tank bolted to the frame
Low number boards
Extended range dynamic brakes
Lipped exhaust tub
As delivered Antenna package
GE Hi-Adhesion trucks
Inside struts on all truck sides
Central air intake in forward position
An earlier purchaser of the AC4400CW, the units purchased by Chicago & Northwestern were again dressed in the attractive -Lighting Stripe- paint scheme, but now with the addition of an Operation Lifesaver decoration on the long hood. The AC traction paired well with the long heavy coal trains CNW was pulling out of the Powder River Basin. Many of these units lasted well after the UP acquisition of CNW in their original paint or with minor patching. These early versions rode on the first iteration of the Hi-Adhesion trucks with struts on all four corners of each trucks that were both shorter and inboard of the brake cylinders compared to later variations.
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO RTR 40Ft Offset Ballast Hopper w/Load - Wisconsin Central #110
Detailed Information
MODEL FEATURES:
Removable load
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied wire grab irons and brake wheel
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Replacement parts available
Minimum radius: 15inch
Solid nickel silver wheels with RP25 contours operate on all popular brands of track
HO EMD GP40 - DCC & Sound - Wisconsin Central #3014
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Flat-Type Single-Chime - Air Horns (2)
Details West HO Scale locomotive Air Horns are based on those used on locomotives and cab car rooftops. Available in several designs to match a variety of prototypes, each part is a detailed brass casting.
Trinity 3230 Covered Hopper - Chicago Freight Car #3104
FEATURES:
All new tooling
Ready to run
Injection molded plastic
Fine scale detail
Separately applied wire grab irons
Separately applied wire cut levers
Etched metal roofwalks
Crisp painting and printing
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - MRRX #4864
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Double Billboard - Kit
DIMENSIONS:
5-1/2 x 1-1/4 x 2 inches
Penn Central and Conrail Trackside with Engineer Chip Syme
Author: Chip Syme
Released: November 15, 2021
Hardcover, 128 Pages
Join author Chip Syme as he hires on with the Penn Central in 1969 as a fireman through the end of Conrail during his days as an engineer! A lot of good miles and smiles and they are recounted here in terrific photographs and entertaining stories!
HO RTR ACF 4650 3-Bay Hopper - SOO Line #74177
Date: BLT 11-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
The Rustic Water Tower from Woodland Scenics is a vital part of any city water system. Based on a 1900s water tower, structures like this have been local landmarks for over a century and many are still in use. This steel water tower features an elevated water tank, latticework legs, a center inspection scaffold, ladders and a separate pump house. The tower is factory weathered and features applied graffiti for extra realism. The Rustic Water Tower comes equipped with a rooftop LED aircraft warning light designed for use with the Just Plug(R) lighting system
2 1/8 x 2 17/32 x 5 1/2in
5.39 x 6.42 x 13.9 cm
HO GP38-2 - DCC & Sound - Helm Leasing (HLCX) #3814
Detailed Information
HLCX FEATURES:
Ex Texas Mexican Railway
3800 gallon Fuel tank
Blomberg B trucks
Front ditch lights
Front small EMD plow
Firecracker antenna
Helm Leasing is a large locomotive leasing outfit known for providing reliable power to railroads for short term and long term contracts. Many were painted into this very attractive scheme and could be found in service on just about any railroad.
ROAD NUMBER SPECIFIC FEATURES:
#3812
Ex TM #863
Mid/Late phase body
All-weather window
Leslie 3-chime horn
#3814
Ex TM #867
Late phase body
Q-style radiator fans
Nathan P5 horn
Angled blower housing
All- weather window
GP38-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO 53ft Railgon Gondola - Seaboard System #481642
(Patched Ex-Railgon, black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft Railgon Gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
A great addition to your HO freight car fleet, the models feature:
-Based on Railgon 310000 series cars
-Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
-Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
-100-ton roller-bearing trucks
-Correct 36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO - RTR FMC 60Ft DD/SS Hi-Cube Box - Conrail/NYC #221745
Detailed Information
MODEL FEATURES:
Double 8Ft Youngstown doors
Separately applied grab irons, end ladders, and brake wheel
Photo-etched coupler cross-over platform
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Weighted for trouble free operation
Newly tooled -70 or -100 ton roller bearing trucks with 33inch or 36inch wheels per prototype
Machined metal wheels and RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18inch
HO 60ft NSC 5150 3-Bay Covered Hopper - BNSF #495275
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 1973 Kenworth K100 Aerodyne Sleeper Cab Tractor
HO RTR Trinity Rail 3281 Cu Ft 2-Bay Covered Hopper -Holcim (US) GNAX #2627
(2020s, gray, yellow conspicuity marks, DJ Joseph Log
Product Information
This HO Scale TrinityRail 3281 Cu.Ft. 2-Bay Covered Hopper is based on a common late-1990s and later prototype commonly used to haul frac sand, roofing granules and similar materials. With the boom in frack sand traffic it isnt uncommon to see these prototypes used in unit trains. Prototype cars measure 41ft-11inch long, and the cars are equipped with three or five round loading hatches and a pair of gravity outlets for commodity off-loading. Compared with earlier 2-bay covered hoppers, these cars are distinctive. Notably, an overhanging arched roof, heavy top reinforcement stiffener, and folded jack pads at the bolster are spotting features for the Trinity 3281. This design has proven to be popular with shippers and railroads alike. The HO scale freight car features an injection-molded body, applied wire grab irons, photo-etched walkways and working shelf-type knuckle couplers without trip pins for scale appearance. Other details include roadnumbers printed on the truck sideframes, coupler cut levers, NMRA compliant car weight, trucks with spinning bearing caps, multiple roadnumbers per scheme and graffiti on select roadnumbers.
HO 52Ft Mill Gondola - Conrail CR #587281
NEW FEATURES:
Refined end-sheet molded-on details
Improved rivet and bolt details
Corrected wire grab-iron placements
New top-chord details
New jack reinforcement pad details
New coupler cut lever mounting details
MODEL FEATURES:
Separately applied wire grab irons
Body-mounted McHenry operating scale knuckle couplers
33inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO Slab-Side Covered Hopper - Canadian Pacific (CP Script) #380438
6 Hatch
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
N Scale Barber Roller-Bearing Freight Car Trucks - w/ Medium Extended Couplers (1 Pair)
Product Information
Micro-Trains(R) trucks feature detailed sideframes molded in durable engineering plastic.
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
HO ACF 5250 Covered Hopper - General American (GACX) #60438
Features:
Ready to run
Injection molded plastic
Fine scale detail
Etched metal roof walk
Metal knuckle couplers
Road specific hatch and outlet configurations
Road specific roof walk variations
Three body style variations
Separately applied wire grab irons and wire brake lines
Crisp painting/printing
Free-rolling 100-ton trucks
Plastruct 90172 Butyrate Half Round Profile 1/4 (4pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
GRAY
OUTSIDE DIAMETER (O.D.)
1/4
6.4mm
INSIDE DIAMETER (I.D.)
1/8
3.2mm
THICKNESS IN INCHES
1/16
THICKNESSS IN MM
1.6mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
HALF ROUND PROFILES Use for the top housing unit of corrugated roll-up doors, large scale gutters and bannister railings, and decorative trim for inside and outside buildings.
HO Peterbilt 389 Sleeper Cab Tractor w/Pneumatic Bulk Trailer - Lime Green, Black, Chrome
HO 60ft Hi-Cube Plate F Boxcar - Norfolk Southern #469321
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline(R) 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO C-20 ICC Caboose w/Lights - DCC Ready - Norfolk & Western #500854
ETA: April 2022
Detailed Information
The ultimate detail with the best Genesis features.
International Car Co. began specializing in caboose production as early as 1941. When the railroads entered the 1960s, many needed to replace their aging, in some cases home shop built, cabooses. International Car responded with a product that could be tailored to each railroads specific needs. Using quality components and modern engineering, ICC became a leading name within the industry.
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
NW FEATURES:
N&W C-20 Class caboose
N&W Blue scheme with -Hamburger- style logo
Friction Bearing Trucks
Air horn (Functions in DCC)
Propane tank and basket
Functioning interior lights in DCC
ICC CABOOSE FEATURES:
Better than brass detail including roadname and road number specific detail and laser-sharp painting and printing
Interior seating for the addition of crew figures.
See-through end platforms and steps
Flush window glazing
Wire-form grab irons
Caboose trucks with animated rotating bearing or static friction bearing caps
Axle generator details
Body-mounted McHenry scale knuckle-spring Couplers
Machined metal RP25 profile wheel sets
Fully-assembled and ready-to-run out of the box
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Separate wireform grab irons, etched metal coupler platforms
Coupler lift bars, trainline hoses, brake hoses, and hardware
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Weighted for trouble-free operation
Multiple road numbers
Minimum radius: 18inch
LED LIGHT EQUIPPED FEATURES:
LED lighting for long life and reliable operation
On-board DCC Decoder by NCE – Operates in DCC and Analog (DC) with lighting functions controllable in DCC
Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
(not all cars have marker lights)
LED Interior Lights
All functions NMRA compatible in DCC mode
HO Code 83 Nickel Silver DCC Friendly #6 Turnout - Right Hand
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 83 rail!
Combining great looks and great performance in a complete system, each item comes fully assembled and features:
-Thin profile ties in realistic dark brown with enhanced wood grain detail
-Fine profile molded spike and tie plate details on each tie
-Spike-mounting holes positioned next to the rail
-Molded starter points on underside of ties for fasteners
-Custom formulated nickel silver rail for outstanding electrical conductivity
In addition to these details, each DCC-friendly Code 83 Turnout features:
-Snap-action points
-Solid rail points for better conductivity
-Isolated frogs with built-in jumper for powering as desired
-Current jumpers entering and leaving the frogs
-Insulated tie bar
HO Budd Slumbercoach - Amtrak (Phase 1) #2027 Loch Ness
All new from the ground up, the Rapido Slumbercoach features:
Designed from original blueprints
Full Rapido level of underbody detail including separate pipes and conduits
Full multi-color interior detail including roomette doors
Track-powered interior lighting (operable on both DC and DCC)
Accurate GSC 41-NDO-11 trucks with disc brake detail
Etched-metal end gates
Sprung diaphragms
Rapidos renowned stainless-steel finish
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Brown
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
HO U33B - DCC/Sound - Guilford (Boston & Maine) #192
FEATURES:
- Flush-mounted radiator screens and air intake screens on the long hood - early phase
- Built-out area on the top of the front and rear pilots - early phase
- Corrugated radiator and air intake screens, with a flat pilot face - late phase
- Optional separate electrical equipment box will be included on the left side walkway behind the cab per the prototype
- AAR-B or Blomberg trucks will be used when appropriate
- Separately-applied detail parts including: windshield wipers, metal grab irons, coupler cut levers, fine scale handrails & more!
- Five pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Directional lighting with Golden-white LEDs
- Blackened metal wheels
ATLAS MASTER GOLD (DCC/SOUND):
- ESU LokSound decoder, supporting all DCC programming modes
- Flexible mapping of function keys F0 to F31
- Follows all NMRA DCC standards and recommended practices
- Lighting effects to match the prototype, including Gyralight and Mars light where appropriate
- Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
HO Greenville 86ft Double Plug Door Box Car - B20 Repaint 1989+ Norfolk Southern #868172
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: October 2021
Norfolk Southern (NW) B20 Repaint 1989+ offers one of our most requested schemes for this boxcar, a Norfolk Southern option. These cars were painted in NS brown paint in 1989 complete with the NS logo stenciling in white. This 1965-built Greenville group features accurate Center-of-Car Cushioning details, a Hydra-Cushion cylinder and truck mounted brake hardware. The B20 class rides on 70-Ton Barber S-2A Roller Bearing Trucks, with 33inch wheels and accurate rotating -Timken- roller bearing caps. As a reminder, N&W was the largest original purchaser of Greenville 86ft auto parts boxcars from multiple eras, and these cars literally went everywhere. These beauties are available with six road numbers!
HO 40Ft Wood Reefer - Canadian National #207123
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark - 6pkg #1
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
Flat Brushable Acrylic - Flat Light Blue - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
RTR 85 ft Horizon Food Service Car - Amtrak (Phase IV)
(Phase IV, silver, wide blue, thin red and white stripes)
Expected Delivery: January 2021
Product Information
Upgrade Amtrak and commuter service in minutes with WalthersMainline Horizon Fleet Cars! Based on later modifications of a design first introduced in the 1970s, Amtrak purchased 18 Food Service Cars (and 86 coaches) with two different interior arrangements in 1989 - 1990 for use on inter-city runs, where they can still be found today. Nicely detailed, affordably priced and ready for service right out of the box, features of the models include:
Limited edition - one time run of these schemes!
Factory-installed diaphragms
Drawbars for 22Inch or larger radius curves
Improved underbody details
Prototypes in Amtrak(R) and regional commuter service
Tinted windows
Authentic paint and lettering schemes
Correct GSI roller bearing trucks with 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24Inch radius is recommended for operation.
Officially licensed by Amtrak; Amtrak is a registered service mark of the National Railroad Passenger Corporation
HO GE 44 Tonner Phase IV - DC/DCC/Sound - Canadian National (Green) #1
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
Tidy Track(TM) Track Painter - Paint Marker - 1/3oz (10mL) - Weathered Tie
Easily transforms shiny rails and clean ties to look as realistic as the rest of your layout.
-Use before or after installation
-Paint metal or plastic
-Two tips work for all scales
Colour ties a realistic Weathered color.
40Ft Corrugated Container Ocean Network Express 2pk
TLLU #607537(0) UETU #407554(5)
HO 40ft 16K Gallon Tank Car - Corn Products Corp/CCLX #1301
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Cable Laying Party - 3 Workers, Cable Spool, Wheelbarrow
Canadian Pacific Color Guide to Freight and Passenger Equipment -- Volume 2
More than 300 color images of CPR rolling stock in revenue freight and passenger service as well as maintenance of way.
HO Alco FA-1 - DCC Ready - Canadian National #9403
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
N Scale Maple Trees - 2-1/2 - 2-3/4 inches (4pk)
Layout-Ready Trees for Your Railroad!
Bring your urban or countryside railroad to life with realistic trees by Bachmann. Create your own orchard or blanket a hillside in dense forest with deciduous and coniferous trees offered in a variety of sizes. Suitable for all scales. Layout-ready, authentic-looking trees feature realistic colors and their removable bases make adding them to existing scenes quick and easy. SceneScapes trees are part of the line of Bachmann scenery products.
These authentic-looking trees feature realistic colors and their removable based make adding them to existing scenes quick and easy.
N Scale Flexi Flo Hopper (Late) - Penn Central (Billboard Repaint) #897825
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO Trinity 3-Bay Hopper - KRIX (3pk) #2
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
CurrentKeeper
DIMENSIONS:
40 x 6 x 11mm
The SoundTraxx CurrentKeeper is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup or dead frogs to ensure reliable operation of any locomotive in your fleet.
U23B Gold DCC/Sound - C&O Chessie #2313
MASTER MODEL FEATURES:
Snow plow (included when appropriate per road name)
Separately-applied scale detail parts include: windshield wipers, metal grab irons, coupler cut levers, multiple-unit hoses, trainline hoses, fine scale handrails, drop steps and more!
Five pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting with Golden-white LED s
Blackened metal wheels
Additional features:
21-pin Socket for DCC (Silver Series Model)
Detailed cab interior with crew
Exceptional painting and printing
Factory-equipped with AccuMate knuckle couplers
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices
Athearn Genesis G15438 - HO ACF 4600 3-Bay Center Flow Hopper - SOO #74112
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - As above but with double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve, and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36in machined metal wheels and animated spinning roller bearing caps
PROTOTYPE AND BACKGROUND INFO:
The 3-bay Center Flow covered hopper first entered service in the mid-1960s, built by American Car and Foundry. The cars handle loads such as grain, corn, and similar bulk commodities. The Center Flow design relies on the car?s rounded body to provide structural strength - eliminating the traditional center sill and making gravity unloading easier.
Our 3-bay car represents the common 4600 cu.ft. capacity version. The railroads looking to replace their aging 40? box cars in grain service needed a modern hopper design - one that could operate within the tighter Plate B clearances for light branchline and industrial service. ACF?s design won them many contracts from a plethora of railroads. One can find these cars still in revenue service today in grain trains and other similar service.
HO PC&F 5241 CUFT - Boxcar - EEC Patch 2 - Single Car #3139
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 2-Lane Wood Grade Crossing - Kit (2pk)
This Blair Line HO Scale Wood Grade Crossing is ready to install on your highway and road crossings. Similar to those found all over North America, laser-cut wood kits are detailed with laser-etched boards and bolt holes. Add realism to your roads with these laser-cut wood grade crossings. These plank-style crossings feature laser-engraved plank and bolt details. Each highway grade crossing is fully assembled and ready to paint or stain and install.
HO 45Ft Trailmobile Dry-Van Trailer w/Side Door - CP Rail #282138
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
HO New Look Bus Calgary Transit
Destination Sign:
Elbow Drive 3 South
Detail Variations:
Left-side Emergency Door
4-window exit door
Early-style engine door
Standee Windows
N Scale Concrete Tie Straight Double-Track - 2-7/16 inches (2/pkg)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16135
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
RTR 60Ft Gunderson DD Hi-Cube Box - SRY #6048
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO Code 83 Nickel Silver DCC Friendly #6 Turnout - Left Hand
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 83 rail!
Combining great looks and great performance in a complete system, each item comes fully assembled and features:
-Thin profile ties in realistic dark brown with enhanced wood grain detail
-Fine profile molded spike and tie plate details on each tie
-Spike-mounting holes positioned next to the rail
-Molded starter points on underside of ties for fasteners
-Custom formulated nickel silver rail for outstanding electrical conductivity
In addition to these details, each DCC-friendly Code 83 Turnout features:
-Snap-action points
-Solid rail points for better conductivity
-Isolated frogs with built-in jumper for powering as desired
-Current jumpers entering and leaving the frogs
-Insulated tie bar
HO Greenville 86Ft Double Plug Door Box Car - Norfolk & Western (Delivery 1-1978) #861499
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Norfolk & Western (NW) -Delivery 1978- replicates another major player in the world of Greenville 86Ft Boxcars. The NW rostered several Greenville series, but the 1978 order was the biggest. In fact, this 1978 B-138 class of 317 cars was the biggest Greenville order of any railroad. The bold NW graphics are almost understated on a boxcar of this size, but this paint scheme is one example that literally defines modern auto parts trains. The NW cars feature the correct late-Greenville body with 5 grab irons on each side along with body mounted brake gear. Those gorgeous 100-Ton -Low Profile- Barber S-2-C trucks show off the accurate rotating Timken bearing caps. SKUs -01 through -06 have January 1978 data and SLUs -07 through -12 have February 1978 data.
Triple Crown #463502
Medium NS
Ready to Run.
Features:
-Crisp details and sharp painting and printing, metal wheels
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21173
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO 89ft Thrall Bi-Level Auto Carrier - NS/TTGX #159820
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
N Scale NSC 73Ft Centerbeam Flatcar - CP Rail (6pkg)
Road Numbers:
318009, 318034, 318051, 318086, 318107, 318145
The N Scale NSC 73Ft Centerbeam Flatcar features:
Two top truss configurations; early Z pattern and standard closed pattern with tie-down brackets
Two deck configurations; early with risers and mid without riser
Two underbody configurations
Multiple brake stand options
Multiple truck types
Fully detailed underbodies with brake piping and rigging
Free rolling, metal wheelsets
Multiple end cage variants
HO EMD SW900 - LokSound 5 Sound & DCC - Southern Pacific #2278
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- ESU LokSound 5 sound for DCC and DC layouts
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
HO RTR 65Ft 6inch Mill Gondola - Lehigh Valley #34277
MODEL FEATURES:
Working drop ends. Gently lift up & push inward to fold ends down.
Separately applied wire grab irons
Interior detailing
Decorated models fully-assembled and ready to run out of the box
Machined metal wheels and RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Minimum radius: 18inch
Spray Can - Titanium Silver (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Plastruct 90105 OD 3/16 Butyrate Tubing (9pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
WHITE
OUTSIDE DIAMETER (O.D.)
3/16
4.8mm
INSIDE DIAMETER (I.D.)
3/32″
2.4mm
THICKNESS IN INCHES
3/64
THICKNESSS IN MM
1.2mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
TRADITIONAL BUTYRATE ROUND TUBING Use for piping in industrial, residential, commercial and many other model settings. May also be used as round pylons in bridge, pier and other structures.
HO 50ft Ext-Post Hi-Cube Plug Boxcar - Columbia & Cowlitz #3037
MODEL FEATURES:
- Separately applied brake wheel and stirrups
- Highly-detailed, injection-molded body
- Metal wheels with RP25 contours operate on all popular brands of track
- Minimum radius: 18 inches
HO International 7600 3-Axle Hvy-Duty Dump Truck - Assembled - Yellow Cab/Silver Body
Product Information
This Walthers SceneMaster International 7600 3-Axle Heavy-Duty Dump Truck is typical of todays heavy trucks operated by railroads, gas, water and power utilities, as well as city, county and state highway departments.
Also known as the WorkStar, this series of technologically sophisticated, heavy-duty trucks is powered by an 11-liter (390 horsepower) or 13-liter (475 horsepower) diesel engine, and can be built on a single- or dual-axle platform. The combination of power and versatility make it a favorite with railroad, construction, mining and utility companies.
This detailed HO scale model of the International 7600 3-Axle Heavy-Duty Dump Truck will look right at home in construction scenes on your modern-era layout.
Licensed replica of popular International truck
Must-have for HO model railroads
Perfect size for collectors
Fully assembled and painted
Die cast metal and plastic parts
INTERNATIONAL(R) and other International Truck trademarks are licensed by International Truck Intellectual Property Company, LLC.
HO Delivery G43A 2-1968 Gondola - Penn Central #576041
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inchh Wheels
PC -Delivery G43A 2-1968- in the original Penn Central green paint scheme, and a PC version we have not yet offered! These gorgeous models have 2 placards in place for the PC reporting marks, road numbers, and ACI label on the left side of the car. On the right side is an additional placard that includes a PC logo and Penn Central lettering. These placards are utilized on this class of PC car since these cars have side corrugations on each panel, where they knew that putting paint on the corrugations would not last very long! These cars have corrugated ends, and the Tangent replica includes oxide red car interiors ? on the interior walls and ends ? like the prototype. We even duplicated the slight green overspray on the inside end corners! The 100-Ton trucks feature accurate rotating -Timken- caps.
HO EMD GP7 - DCC & Sound - Conrail #5834
Detailed Information
CR FEATURES:
Ex-RDG repaints- first time in Genesis!
Mostly similar spotting features to RDG units also in this run
Leslie S3L horn
Long hood-forward operation
Different wheel bearing styles per prototype
Different fuel tank capacities per prototype
In 1976, the federal government created the Consolidated Rail Corporation (Conrail) to assume control of several bankrupt and/or financially struggling eastern railroads. Among these was the bankrupt Reading Company, whose railroad assets were sold to Conrail on April 1, 1976. Part of this acquisition was a group of 17 EMD GP7 locomotives. While several units were put to work immediately with patched numbers and logos, others were repainted into CRs medium blue scheme- although there was considerable variation from unit to unit. This group of three former Reading GP7s feature a variety of detail and artwork differences and will be right at home running with rebuilt ALCOs and other geeps during early Conrail operations.
ROAD NUMBER SPECIFIC FEATURES:
#5831
Footboard pilots
Early repaint with no -Can Opener- logo
#5834
Unique non-standard -Conrail- font on sides
#5839
Former passenger unit- no dynamic brakes and retains the underframe water tanks
Early repaint with no -Can Opener- logo
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO Class D10h 4-6-0 - DC/Silent - Dominion Atlantic #1046
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
Rapido Bits 102064 N Scale Passenger Car Trucks
Rapido Trains 6-Wheel Passenger Car Trucks feature fully detailed sideframes with separately applied details and a serial number molded on each truck. Trucks feature slippery Celcon plastic bearings for excellent rolling quality, and insulated metal RP-25 wheelsets with one side insulation.
Excel Hobby Blades - Self Healing Cutting Mat - Green - 12In x 18In
HO EMD SD9 - DCC & Sound - Baltimore & Ohio #769
Baltimore & Ohio
- Correctly oriented cab interior for long hood forward operation
- Single fuel tank (First time done on a plastic model!)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO N7 Class Steel Bay Window Caboose - Penn Central (Green Repaint 1975+) #21522
Product: Despatch Shops Inc. NYC Lot 782 – N7 Class Steel Bay Window Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Gould plain-bearing trucks with separate brake beam part
Wheels: CNC-machined standard RP25 .110inch tread 33inch wheels
DC/DCC Lighting Features: Interior Lights and End Marker Lights
Penn Central (PC) N7 Green Repaint 1975+ represents the most common scheme applied by Penn Central to the N7 class of DSI cabooses. Wearing the classic PC green colors that Tangent replicates better than anyone in the industry, these cabooses feature the large road numbers on the left side of the car and the italicized PENN CENTRAL above the cupola. The roof is black per PC practice, who also removed the running board and end ladders at the time of painting. Check out that classic PC replacement smokejack. Dont forget the bright yellow safety steps! The fully-painted interior features black seats and stove, and light green cabinets and walls which was the selected interior color. The interior is lit, as are the tiny pairs of red marker lights on each end that PC applied to these cabooses. Eagle-eyed modelers will notice the -POOL- denotation on the end doors of this caboose to denote their pool service status (i.e. they ran everywhere). Finally we round these cars out with the application of ACI labels, which was a standard PC practice for these cabooses. We offer this scheme in four prototypically-accurate road numbers.
HO 85ft ACF 48-Seat Diner - Lighted - Union Pacific (City of Los Angeles) #4808
Union Pacific Heritage Fleet
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
Built as Lunch Counter Cafe Lounge in 1959 and originally numbered 5015, this car returned to special service as the Overland in 1988, named for UPs Overland Flyer and the later Overland Limited, which were both named for UPs Overland Route.
Fuel Stains Enamel Paint - 35ml Bottle
Enamel type effect for modelling
The definitive mixture to make fuel spilled effects in any type of modern or classic vehicle. This is not product to make oil and grease effects. This product is good mainly to make fuel spilled effects only with a great realism. This product is enamel and it can be blended with the rest of our colors and it is diluted with our White Spirit.
Heavy Forklift
Put this easy-to-build Walthers SceneMaster vehicle kit to work along your HO layout! The model features:
Designed for easy assembly
Highly detailed to bring HO layouts to life
Great detail working heavy industries, lumberyards & similar businesses
Position able lifting arm & fork
Detailed cab with interior
Molded in two colors & clear plastic
Fine Turf - Earth - Bag (21.6 in3)
Use Earth Fine Turf to model the terrains surface and low ground cover. Highlight and accent landscape to add color variations. It is colorfast and blends naturally with other foliage. Use for any scale.
Individual bag provides enough Fine Turf to create realistic landscape on various areas of your layout.
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended.
16-3/8 x 7-1/8 x 5-15/16 inches - 40.9 x 17.8 x 13.2cm.
With its colorful signs and period styling, this HO Scale structure is right at home from 1900 to the present day. Based on a prototype at Waterloo, Iowa, it is perfect for adding action and operation to your railroad. The multi-story building has an elevated cattle chute, attached office, power plant, roof-top details, colorful decals -- everything you need, including four dressed beef for the loading dock.
HO EMD SD9 - DC/Silent - Chicago, Burlington & Quincy #834
-white frame
Chicago, Burlington & Quincy
- Phase IV (First time for a plastic model!)
- Higher short hood with a corresponding cab height
- Cornered-off section on the long hood behind the cab
- Two 48inch radiator fans as opposed to the normal (four) 36inch fans
- Conduit pipes were removed from the top of the radiator
- No ladders on the short hood end
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Evergreen Scale Models 4062 .060in Opeque White Polystyrene Novelty Siding (1sheet)
HO 89Ft Bethlehem Flush-Deck Flatcar - TTX #156225
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers
1:87 1966 GM 4107 - Trailways
HO Scenic Accent Figures - Roofers (6 pkg)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism.
N Scale Farmer Grain (FarMarCo) PS 4427, 4750 and ACF 4650 Covered Hopper - 1968-83 - Waterslide Decals
Circa: 1968-83
Scale: N Scale
Equipment Type: TLDX, EUGX, PTLX, WCDX, PS 4427, 4750 and ACF 4650 Covered Hoppers
Description: This set will cover a variety of FAR-MAR-CO Pullman Standard covered hoppers and the 4650 ACF Centerflow Hopper. FAR-MAR-CO was formed in mid-1968 in the merger of four regional cooperatives in Kansas, Nebraska, and Missouri. Supporting grain movements from terminal elevators to domestic sales destinations or export terminals is a 1000-car jumbo covered rail hopper fleet. FAR-MAR-CO lasted between 1968-1983 before being purchased by the employees and renamed PMS foods Inc. - Waterslide Decal
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
HO ALCo RS-3 - DCC/Sound - CN (Black) #3040
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO DC-21 Pin Motherboard for LEDs (3)
HO Auto-Max Carrier - AOK #501510
Era: 1999+
MODEL FEATURES:
- Separately applied ladders, brake rigging, stirrups, and handbrake details
- Simulated corrugated roof
- Full articulation with flexible diaphragm
- Safety striping
- 70-ton roller bearing trucks
- 33 inch machined metal wheels with RP25 contours
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
In 1999, Gunderson began production of the Auto-Max articulated auto rack car. This unique car can carry 22 SUVs on three sets of internal ramps. Measuring over 140 feet long and 20 feet tall from the railhead, the Auto-Max pushes the operational and clearance limits of the railroad industry.
HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Circle Keystone) #727340
1948+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO Industrial/Commercial Detail Set
(Unfinished Metal Casting)
C-27 ICC Caboose w/Tsunami Sound & Lights - B&O/Chessie System #C-3915
The ultimate detail with the best Genesis features.
International Car Co. began specializing in caboose production as early as 1941. When the railroads entered the 1960s, many needed to replace their aging, in some cases home shop built, cabooses. International Car responded with a product that could be tailored to each railroads specific needs. Using quality components and modern engineering, ICC became a leading name within the industry.
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
ICC CABOOSE FEATURES:
- Better than brass detail including roadname and road number specific detail Laser-Sharp Painting and Printing
- Interior seating for the addition of crew figures.
- See-through End Platforms and Steps
- Flush Window Glazing
- Wire-form Grab Irons
- Caboose trucks with animated rotating bearing or static friction bearing caps
- Axle Generator Details
- Body-Mounted McHenry® scale knuckle-spring Couplers
- Machined Metal RP25 Profile Wheel Sets
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Separate wireform grab irons, etched metal coupler platforms
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for trouble-free operation
- Window packaging for easy viewing, plus interior plastic blister safely holds the model for convenient storage
- Multiple road numbers
- Minimum radius: 18in
LED LIGHT EQUIPPED FEATURES:
- LED lighting for long life and reliable operation
- On-board DCC Decoder by NCE
- Operates in DCC and Analog (DC) with lighting Functions Controllable in DCC
- Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
- LED Interior Lights
- All functions NMRA compatible in DCC mode
SOUND EQUIPPED MODELS ALSO FEATURE:
- Soundtraxx Tsunami SoundCar decoder w/ included sounds:
- Air horn or conductors whistle as appropriate
- Clickety-clack with optional wheel flat spot sounds
- Brake set/release sounds including retainers and brake squeal
- Big Hole emergency brake application sound
- Handbrake tie-down/release
- Adjustable flange squeal
- Air, horn, and bell sounds work seamlessly with Soundtraxx locomotive sound decoders
- Supports Advanced Consisting in DCC
- Full DCC functions available when operated in DCC mode
- All functions NMRA compatible in DCC mode
B&O CHESSIE FEATURES:
- Brand NEW ICC B&O Style body
- Angled window screens
- Early style axle-driven generator
- Caboose trucks with roller bearing caps
- Ash pans
- Toilet Drain
- Illuminated marker lights, where appropriate
- Reflectors on end cages
- Overhanging, diagonal-panel roof with or without blank panel at smoke jack per prototype
- Overhanging, x-panel roof for the B&O Chessie caboose
Chessie #3835, #3887, #3915 features: First time ever C26A version. Dayco axle generator with notched undeframe.
Chessie C-3771 Gold Caboose - Unique safety slogan and Gold and Silver Paint
HO Scale Power Meters Bases - 16pkg
This kit includes 16 power meter bases with weather heads Supply your own 0.020ft or 0.025inch brass wire or styrene rod to fit the length needed between the meter and the weather head according to your structure needs.
Blair Line HO Scale - Graffiti Decals Mega Set - Set #7
RTR 60Ft Gundreson Box Car - MTNR #175150
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO 40ft Fruehauf Trailer - Penn Central #295532
Era: 1971-1990, 1991-2009, 2010-Present Day
MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- 2 or 4 door rods per prototype
- Wheeled or shoe-style landing gear per prototype
- Fully-assembled and ready to use out of the box
- Highly-detailed, injection-molded body
Dual Color LED Accessory Fascia Controller
plus one cable of 942-113 - Plug - Socket extension cable - 48 inches Long
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
See the entire system!
The Walthers Layout Control System Dual Color LED Accessory Controller features:
Compact footprint for space-saving installation
Green/yellow LED indicator - adjustable display to match Switch Machine settings
Single pushbutton operation
Complete instructions with mounting template - use with Control System Turnout Drill Set (#942-140, sold separately)
Fits 1/8 inch or 1/4 inch (0.3 or 0.6cm) thick panels
Connecting cable included - easily expanded with Extension Cable (#942-113, sold separately)
HO 50ft 100-Ton 4-Bay Hopper - Chicago & North Western #63121
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from mid-1960s to mid-2000s
- Standard car for 1980s and later Powder River unit coal trains serving power plants
- Also used to transport stone and other bulk loads
- Die-cast metal underframe for excellent performance loaded or empty
- Sloped sheet braces & update brake gear
- Correct 36 inch turned metal RP-25 wheels
- Proto MAX(TM) metal knuckle couplers
HO 40Ft Standard Height Container - Ocean Network Express ONE (TLLU) Set #1
FEATURES:
40Ft based on corrugated design with logo panels
All containers feature opening doors
Accurate painting and lettering
3 pieces per set
HO RTR 40Ft Single-Door Steel Boxcar - New Haven #36141
(vermillion, black, white)
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. Check out the entire line of Bowser HO Scale ready-to-run boxcars.
HO SP C-40-3 Steel Cupola Caboose - Southern Pacific (Serif with NO Underline) #1101
1953+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
HO Lightweight Coach - Long Island Rail Road #2181
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO 13,600 Gallon Acid Tank Car - Grupo Mexico (MDCX) #1238
ETA: July 2023
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
HO 70-Ton 12-Panel Hopper - Denver & Rio Grande #14718
Blt.6-66
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO Class D10h 4-6-0 - DCC & Sound - Canadian Pacific #1022
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
HO Hawker-Siddeley Van - Caboose - DEVCO Railway #9104
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
Baffle Kit - 20mm
This snap-together baffle kit is designed for use with our 20mm round speakers.
HO SD38 - DCC/Sound - B&LE #868
BLE FEATURES:
Later large paper air filter box dynamic brakes, cab mounted gyra-light (upper light only), smaller fuel tank, ditch lights, no plow, rear brake wheel, extra jacking pads, yellow frame stripe, painted lower steps.
ROAD NUMBER SPECIFIC FEATURES:
#866
- Leslie 3 chime horn
- black painted left side walkway
- front and rear ditch lights
- battery danger decals
- modern loop style coupler cut lever
#867
- Leslie 3 chime horn
- front and rear ditch lights
- red coupler cut lever
#868
- Silver P3 horn and cab light housing
- Front ditch lights
- repainted nose and battery box effect
- faded lower steps effect
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
9ml pan (D) - Ultramarine Blue Shade
Each PanPastel Color is loaded with the highest quality artists pigments; and is made using a unique manufacturing process requiring minimal binder, resulting in rich, ultra soft and low dust colors. PanPastel Colors can be mixed for an infinite palette of colors.
Each pan contains 9ml (0.30 fl oz) of color. 40percent more than the average pastel stick, and yielding approx. 4-5 times more coverage.
HO Tavern & Liquor Store Signs
Blair Line HO Scale Business and Storefront signs are printed in appropriate colors on thin plastic for easy assembly or placement with plastic cement or CA glue. Colorful signs are based on real signs and many include two identical signs for back-to-back, two-sided mounting. Steam and diesel-era signs make great roadside, street-side, trackside and structure details.
HO 50ft PS 5277 Cu.Ft. Exterior Post Boxcar - Rock Island #302133
FEATURES:
- Laser Sharp Painting and Printing
- 33 inch InterMountain Precision Metal Wheelsets
- Kadee #178 Metal Knuckle Couplers
Date: NEW 8-79
Minimum Radius - 22 inches
Athearn Genesis G15437 - HO ACF 4600 3-Bay Center Flow Hopper - SOO #74057
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - As above but with double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve, and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36in machined metal wheels and animated spinning roller bearing caps
PROTOTYPE AND BACKGROUND INFO:
The 3-bay Center Flow covered hopper first entered service in the mid-1960s, built by American Car and Foundry. The cars handle loads such as grain, corn, and similar bulk commodities. The Center Flow design relies on the car?s rounded body to provide structural strength - eliminating the traditional center sill and making gravity unloading easier.
Our 3-bay car represents the common 4600 cu.ft. capacity version. The railroads looking to replace their aging 40? box cars in grain service needed a modern hopper design - one that could operate within the tighter Plate B clearances for light branchline and industrial service. ACF?s design won them many contracts from a plethora of railroads. One can find these cars still in revenue service today in grain trains and other similar service.
HO Snap Track Code 83 Starter Set
Nickel-Silver Rail, Black Ties
Set includes:
One 9inch Straight Section
16 18inch Radius Curved Sections
Two 1/3 18inch Radius Curved Sections
One Rerailer
One Manual Left-hand Switch
One Manual Right-hand Switch
One Pair of Terminal Rail Joiners
HO Slab-Side Covered Hopper (6 Hatch) - Canadian National (CN Noodle) #352100
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
HO 70-Ton 12-Panel Hopper - Erie Lackawanna #33685
Blt.3-74
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
40Ft Corrugated Container NYK Logistics 2pk
NYKU #812286(9) , NYRU #824354(1)
Steam Encounters in Ontario Vol.2 by Ian Wilson
Third in a series of all-colour softcovers featuring Jim Guerin pictures in Ontario and Quebec. This volume showcases CNR and CPR steam and diesel in Ontario from 1956 to 1959.
Escape back to the 1950s railway scene in southwestern Ontario with our third all-colour title in the Encounters series. Sit back, relax, and turn the pages as we resume our adventures with photographer Jim Guerin.
We begin in the spring of 1956, and throughout the pages you will revisit favourite haunts?Bayview/Hamilton Junction, Dundas, Guelph, Kitchener, Galt, Stratford, London, Southampton and Lambton.
The photo reproduction is the same high quality you have come to expect with our Made in Canada product. Ian Wilsons narrative, combined with graphic artist Rebecas photo finishing, is served up to you on the finest glossy archival paper stock by our friends at Ampersand Printing.
As with all our Encounters volumes, you will savour a collection of photographic vignettes, fleeting glimpses. These cover the southwestern Ontario scene between 1956 and 1959. Pick up the 48-page softcover book and lose yourself in the spreads anytime!
Microscale MI-12 Liquid Decal Film 1oz
Everyone should have Micro Liquid Decal Film who models and uses decals. Especially if you have been at it for some time. The typical decal scrap box is not the best place to store decals. Exposed to air, sunlight, and moisture, great swings of temperature or general abuse, and decals will go bad. Or maybe you just always had trouble putting on thin stripes. Micro Liquid Decal Film solves all of those problems and makes a decal which for whatever reason is bad, work again just like new almost immediately. Of course if you have already put it in water it is too late. So if you have some old decals you really have to use, coat them with Micro Liquid Decal Film to be sure. Or if there is any indication that you might have a problem, dont take a chance, you can solve the problem on the spot. Simply take a small brush and coat the image on the decal you want to use. Allow to dry for 20 minutes. Apply the decal as usual. Its that simple.
HO FM H16-44, Standard DC, Canadian Pacific: Action Red Scheme No.8709
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
N Scale 2-Bay Hopper - ATSF #82142
These GA-105-class covered hoppers with Bettendorf trucks were built in 1957 in a series of 500 cars.
1 Inch Sanding Stick Cloth Back - Paper Sanding Strip Assortment (refill for 795-37752)
Includes 2 Each #37765, 37766, 37767, 37768 & 37769
HO GP40-2 - DCC & Sound - DT&I #422
Detailed Information
DTI FEATURES:
Last DT&I scheme
Nose-mounted bell
Xenon beacon (effect in DCC)
M3 horn
Extra nose grab irons
Front plow
Firecracker antenna
Non-dynamic brake hatch
Extra jacking pads
Llit class lights and number boards (effect in DCC)
DT&Is last locomotive order was for GP40-2s #422-425 in late 1979. Painted in their new bright -star- logo, they were built for high-speed TOFC service. Notable DT&I options included: Xenon beacon, nose mounted bell, and non-dynamic brake hatch. GP40-2 #407 was part of the original order from 1972. After being repaired from a wreck in 1979, it was repainted into the new -star- scheme and put back into service.
ROAD NUMBER SPECIFIC FEATURES:
#407
Repainted after wreck
chickenwire grilles
small EMD plow
orange bell
small front anticlimber
#422
Last DT&I locomotive order; corrugated grilles
newly tooled xenon beacon with bracket
large EMD plow
silver bell
large front anticlimber
#424
Last DT&I locomotive order; corrugated grilles
newly tooled xenon beacon with bracket
large EMD plow
silver bell
large front anticlimber
GP40-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 40Ft Fruehauf Fluted Side Volume Van - Pacific Intermountain Express PIE #V4480
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
HO 53ft Reefer Container - Canadian Pacific
A cool addition to contemporary HO intermodal operations, the Scenemaster 53ft Reefer Container will look great on rails or roads!
Features include:
- All-new model!
- Prototypes now in domestic service across North America hauling perishable food products
- Highly detailed refrigeration unit
- Realistic body details
- Colorful, contemporary paint and lettering schemes
- Perfect loads for WalthersProto or WalthersMainline well cars (sold separately)
- Instant detail for terminals, highways and industrial scenes
- Fully assembled, ready to use
HO ET44 Tier 4 - DCC & Sound - Kansas City Southern #5008
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
-Factory installed Celcon handrails
-Individually applied wire formed grab irons
-5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
-See-through cab windows
-DCC Ready 21-pin NEM plug
-LED Illuminated front and rear headlights
-Nickel plated, blackened machined wheels
-Wheels with RP25 contours operate on all popular brand of track
-Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMD’s most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
HO EMD FT A+B Set - DC/Silent - Boston & Maine (B&M Maroon Scheme) #4201A + 4201B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO Bi-Level Auto Rack - BNSF/TTGX Flat Car #254903
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0010
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
The Walthers Cornerstone N Scale Two-Story Frame House is typical of homes constructed by the thousands between the 1870s and 1910s and still in use today. Designed to make it easy to add several non-identical homes to your neighborhood, this easily customizable kit includes two different styles of front walls and porches. The Two-Story Frame House will look great in any steam or diesel-era rural or town scene and features:
Two-story wood home with basement
Classic North American house design for middle-class neighborhoods
Built by the thousands 1870 to 1910s
Includes parts for two different front walls and porches
Separate doors, windows and details
Kit - 3-3/8 x 1-1/2 x 2-3/8in 8.6 x 4 x 5.9cm
HO Enterprise 2-Bay Covered Hopper - Canadian National (CNR Delivery) #113086
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
N Scale AutoScenes - Cop a Kiss
A cop catches a couple stealing kisses in the back seat while walking his beat on Lovers Lane.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:160 N scale models.
Figures included as shown.
HO RTR SD40T-2 - DCC Ready - D&RGW Rio Grande #5353
DRGW FEATURES:
81inch nose
Functioning nose light
Sinclair Antenna
Correct sized fuel tank
See-through lower air intakes
Snow plow
Ratchet style brake
Dual fuel fillers
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Separately applied air tanks
See through cab windows
Welded ECAFB
Photoetch windshield wipers
LED Lighting
HTC truck sideframes
All-wheel electrical pickup
See-through dynamic brake fans
-Mushroom- nose vent on right side
Separately applied wire grab irons
Fully assembled and ready-to-run
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox speific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body
Painted and printed for realistic decoration
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for troublefree operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Replacement parts available including motor brushes
Recommended radius: 22inch
N Scale Hot Air Balloon - Kit
DIMENSIONS:
9.7cm Diameter, 13.5cm Tall
BH1 Tsunami 2 Sound Decoder - ALCO Diesel
Dimensions: 97 x 16 x 7.7mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 8 LED-Friendly Outputs!
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
Get an easy upgrade for your Bachmann Sound Value diesel models with our newest Tsunami2 decoder! The TSU-BH1 offers 8 LED-friendly function outputs so resistors are not required for LEDs! (See the wiring diagrams under product documentation for more information). Light effects are fully remappable and offer full access to our 20+ HyperLight effects.
This decoder is available in 3 sound profiles EMD, GE, and ALCO. For an easy install, simply replace the Sound Value decoder and enjoy all of the Tsunami2 features you love!
This decoder is designed to replace the factory board in the following Bachmann Sound Value Diesel Models: FA-2, FB-2, S-4, E7-A, SD70ACe, ES44AC, GP30, GP38-2, GP40, GP7, and SD40-2.
Fun Tsunami2 features including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and more. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+), couplers, and more!
This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.
Color Powder - Red Iron Oxide (0.30 oz)
Create a wide range of realistic weathering, fading, shading and other effects on structures, rolling stock, scenery and more. PanPastel Colors are professional artists quality soft pastels made with the finest quality pigments for the most concentrated color possible! While they can be mixed and blended like paint, they go on dry (great for use on wood or paper) with no need for water or solvents, and produce very little dust. Each comes in a unique plastic pan to keep them separate and clean, plus they thread securely together making them easy to store or transport from your workbench to your layout. Use straight from the package or mix shades, and apply directly to any surface. With no drying time, colors go on true so you see results instantly! They are highly resistant to fading over time and they are easily washed off if you want to start over.
HO Class D10k 4-6-0 - DC/Silent - Canadian Pacific #1078
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
Drill Bit #66 - 0.033inch Diameter (2 pkg)
Product Information
Walthers Drill Bits are the right tools for all kinds of hobby projects, from detailing locomotives and cars, to scratchbuilding, wiring and more. Theres a full range of common wire gauge - jewelers drill bit sizes from number 80 to 43, and each pack includes two ready-to-use bits. Walthers miniature hardware is a complete range of ready-to-use parts and tools for hobby projects, including wood, machine and nylon insulating screws, plus appropriate hex nuts and washers, in assorted standard sizes (machine and wood screws may be brass or brass plated). Drill Bits are part of the line of Walthers miniature hardware and tools.
HO Scale NSC 73Ft Centerbeam Flatcar - BC Rail #730436
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16181
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.188 (8pcs pkg)
Kadee 1688 1-72 Stainless Steel Screws - 1-72 x 3/8 inches long - pkg(12)
Roundhead
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CWSX (6 pkg) #10
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
140003
140008
140016
140020
140028
140047
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale 50ft FMC Combo Door Boxcar - Railbox/ABOX #51963
Era: 2010-Present Day
MODEL FEATURES:
- Screw mounted, Roller bearing style trucks
- Scale profile brake wheel
- Accurately painted and printed for prototypical realism
- Body-mounted, McHenry operating scale knuckle couplers
- Machined metal wheels operates on Code 55 and 80 rail
- Weighted for optimum performance
- Highly detailed, injection-molded body
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO ET44 Tier 4 - DCC & Sound - CN Heritage/Illinois Central #3008
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO Selling Christmas Trees (5 Figures & 3 Trees)
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
Models depict in-service locomotives from the mid-1990s and beyond.
Road name and road number-specific painting and lettering.
Multiple road numbers offered.
New and improved high-torque motor and drive mechanism guarantees smooth operation.**
Operating radiator fans. Improved radiator fan drive unit with quieter operation and selective fan control.**
All-wheel power pickup and all-axle drive.
Heavy die-cast, zinc alloy chassis.
AuroraJanney scale head replica couplers installed.
NMRA RP-25 wheel contour with Code 110 tread width.
Minimum radius: 18? (recommended 22?)
* Lighting functionality is limited on DC models operating on DC track power.
** Improvement over our previously-released HO scale SD60F.
DC Version Features:
DCC ready with 21MTC connector.
Dual sugar-cube speakers (functional after installation of a DCC sound decoder).
Operates on DC track.
HO EMD SW900 - LokSound 5 Sound & DCC - Milwaukee Road #600
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- ESU LokSound 5 sound for DCC and DC layouts
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
HO 60ft NSC 5150 3-Bay Covered Hopper - Cargill (ICMX) #1124
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Flexible Vinyl Stone Wall Arches - Style 2 - Medium
Add realistic detail to HO structures with this set of Stone Wall Arches from Chooch Enterprises. Molded in flexible vinyl that is easy to cut with scissors or hobby knife, they can be finished with acrylic paints (sold separately) for added realism.
N Scale NSC 64 Ft 6000 Cubic Gondola HS - MWCX #102797
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO High Speed Limit Signs (16pk)
HO GMD-1 - DC/Silent - Canadian National (1900s Noodle w/ Black Cab) #1914
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
Colored Weathering Powder - Dirt Yellow (1oz)
There are several basic methods and approaches to using these powders and we are sure you will probably develop a few of your own! These powders are intended to make rolling stock, buildings, and detail pieces look old, dirty, dusty, rusty, faded, and generally the worse for wear after being exposed to the elements of weather, travel, pollution, and mechanical wear and tear.
HO GE U50 Diesel - DCC & Sound - Southern Pacific #9951
ETA: July 2023
Detailed Information
SP FEATURES:
SP Style -Big Hole- Emergency light (Flash function in DCC only)
Classification lights (Function in DCC only)
Working Truck lights
Number board lights
MU hoses
Separate see-through air intake grills
Due to the increase of better highways in the 1950s the trucking industry was beginning to siphon off time sensitive traffic from the railroads. Consequently, in the late 1950s the Southern Pacific and the Union Pacific railroads were seeking ways to increase the horsepower of their locomotives to help improve train speeds without having to add more locomotives to their trains. The SP was striving to improve transit times on their Sunset Route freights and was utilizing large groups of lower horsepower locomotives to do so. One method to achieve these goals was to mount two complete prime movers on one chassis. UP asked the 3 major locomotive builders at that time to submit proposals using this concept. In response, General Electric created their 5,000-horsepower U50 model, a design which utilized two 2500-horsepower prime movers. SP decided to give 3 of them a try, receiving them in the summer of 1964, but chose not to order any others. They spent most their early service lives working on SPs Sunset Route and ended their SP careers in the 1970s working in drag freight service in the Los Angeles Basin in California. All three were scrapped by 1979.
U50 SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated classification lights
Illuminated number boards
See-through air intakes
4-cube speakers
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Four cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Modern Steel and Concrete Highway Overpass with Pipe Railings
Modernize your HO streets and highways with the Cornerstone Modern Steel and Concrete Highway Overpass with Pipe Railings kit! Packed with authentic detail and designed for easy construction, the prototypes are typically found along lower speed routes with pedestrian and bicycle access as well as along scenic areas. Other features include:
Typical of pre-stressed concrete highway overpasses seen all across North America
Fits highway scenes from the 1960s to the present
Round and Square Support Columns included in short and tall styles to clear railroad or highway below
Build as single or double span - easily combine kits (each sold separately) for a larger assembly
Easy to install in new or existing layout scenes
Detailed abutments with molded cut lines for easy customizing
Parts molded in concrete gray
12-15/16 x 6-1/4in
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AWWX #4631
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
PSC Transfer Van - Canadian National #76558
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
EMD/Blue #1205 SoundTraxx Tsunami sound
All EMD UNITS INCLUDE
Leader PTC antenna array
New feature: Water sight glass
Era: 2012+
EMD Demo/Lease - Blue
Leader PTC Antenna Array
New feature: Water sight glass
SD70ACe AND SD70M-2 SPECIFIC FEATURES
Correctly-sized operating ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or -tube- style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Standard grille or Canadian-style -louver- dynamic brake intakes
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Different jacking pads
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
New version HTCR or HTSC trucks
Non-sound QuickPlug equipped with NMRA 8-pin and 9-pin DCC plugs
McHenry scale knuckle spring couplers
Minimum radius: 18inch
Recommended radius: 22inch
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Opaque White Polystyrene V-Groove Siding Sheet (12in x24in) .080inch Groove Spacing
1 Sheet per pack
0.020Inch thick
Groove spacing is center to center of grooves.
Product Information
Used on freight and passenger cars; as well as railroad, commercial and residential buildings. Many 19th- and early 20th-century structures had panels of V-Groove siding applied in horizontal, vertical and diagonal patterns, or in combination with clapboard and novelty siding for decorative effects. These opaque white, sheets are pre-scribed to match different widths of lumber.
101 More Track Plans for Model Railroaders
Featuring plans from Model Railroader magazine from three decades, each of the 101 track plans has a newly written, informational description of the design. The track plans range in size from simple 4 x 8 foot and smaller layouts to room- and garage-sized showpieces, with the majority focusing on mid-size layouts.
HO 30ft Galvanized Steel Grain Bin - Kit
(Narrow - 2.66 inch Corrugation)
Corrugated steel grain bins are a staple in any agricultural setting, placed on farms, elevators, industries, and beside railroad tracks. Used with a variety of farm commodities, these bins provide a safe, dry place to store that commodity until it goes to market.
With several styles to choose from, these grain bins will look right at home on your layout. They feature prototypical corrugations, realistic galvanized steel appearance, various side sheet heights, and a variety of diameters.
Narrow corrugation bins have corrugations spaced a scale 2.66 inches and the rings are 32 inches tall. Wide corrugation bins have corrugations spaced 4 inches apart with 44 inch tall rings.
All bins are easy to assemble - just stack the rings, glue them together, attach the roof and you are done! Every ring comes as one solid piece, so no time consuming and messy assembly of individual side sheet pieces to create each ring, saving you time and frustration!
What size bin will fit your space? Try our grain bin size calculator or printable template.
https://www.iascaled.com/store/GrainBinSizeCalculators
https://iascaled.com/docs/ho-bin/GBM-HO.pdf
N Scale Flexi Flo Hopper (Late) - Conrail (Flexi Flo Hopper Repaint) #897871
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO Scale H1b Hudson Steam - DCC & Sound - Canadian Pacific (Delivery) #2816
-Early walkway w/smoke deflectors
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - BNSF #545104
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO - Alco Brake Chain Guide -- Plastic pkg(2)
42 ft Coil Steel Car with Fish Belly Side Sill DLRX #166281
The Atlas Master HO Scale 42ft Coil Steel Car with Fishbelly Side Sill is perfect for adding interest to your 1990s and later steel mill train consists. The increased volume of coiled-steel transportation gave rise to a new purpose-built freight car. Previously rolls of coiled-steel had generally traveled in specially equipped gondola cars. In the 1960s a lighter type of car emerged specifically for hauling coils of steel in an integral trough. The car type gained popularity and eventually over 17,000 cars were built. This 42ft Coil Steel Car with Fishbelly Side Sill is patterned after cars introduced in the 1990s and in use in the 21st century. Features of the 42ft Coil Steel Car with Fishbelly Side Sill include prototypical paint schemes and lettering see-through walkways, a removable hood on equipped cars, inside floor detail cut levers, metal wheels and AccuMate magnetic knuckle couplers.
HO Electric Transformer - Kit
Product Information
The Walthers Cornerstone HO Scale Transformer kit is a great detail for electric power generating scenes, substations and at large industrial complexes. High-tonnage equipment like this is also just the ticket for a flatcar load, or as a spare transformer detail around the Northern Light and Power plant or substation. The Transformer kit is one of many Cornerstone, SceneMaster and HO Scale detailing parts.
Use as a scenery detail for flatcar load
Molded in appropriate color
HO Custom Line Code 83 - #6 Left Hand Turnout
Custom-Line Turnouts are prototypically accurate, featuring blackened metal frogs and rivetless switch points that provide superior electrical conductivity. These turnouts can be powered using an under-table switch machine or standard remote and manual code 83 switch machines. All Custom-Line Turnouts have the same geometry as the current Atlas code 100 versions, for drop-in installation in Atlas and other layout plans.
Please note that you cannot substitute a Custom-Line for a Snap-Switch as their geometries are different.
HO RTR ACF 4650 3-Bay Hopper - Western Pacific #11786
(Feather Logo)
Date: BLT 5-82
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO SD40T-2 - DCC & Sound - Southern Pacific (Speed Letter) #8256
ETA: May 2023
Detailed Information
SP -SPEED LETTERING- FEATURES:
88inch nose with brake wheel
Cab mounted A/C
Relocated P3 horn
Front ditch lights
Removed front and rear SP light package
Modified front L window
Extended range dynamic brakes
In an attempt to revise their image, SP began to use a new -Speed Lettering- scheme adapted in 1991. Also, during this time, they started to remove parts of their well-known light packages. If a light component failed, it would have to be fixed, thus taking the locomotive out of service. To reduce maintenance costs, SP started to actively remove these extra lights leaving empty brackets and plates where they were once installed. Other changes included the addition of front ditch lights and the horn being relocated to the rear hood.
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Photo-etched windshield wipers
Separately applied air tanks
LED Lighting
HTC truck sideframes
Welded ECAFB
All-wheel electrical pickup
See-through dynamic brake fans
Separately applied wire grab irons
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox specific for the tunnel motor
Speed recorder attached to appropriate axle per prototype
McHenry operating scale knuckle couplers
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Fully assembled and ready-to-run
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
Scenic Accents(R) - Animal Figurines - Yorkshire Pigs (12/pkg)
HO NSC Ballast Hopper - CP Rail (Branchline) (6pkg)
1978+
6-Pack includes the following numbers, all individually packaged: #456030, #456077, #456107, #456145, #456191, #456220
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
Evergreen Scale Models - Opaque White Polystyrene Channel .100In x 14In (4 pcs pkg)
1 inch Open Web Truss - Warren Style (1pc)
Excellent for towers and booms. Also good for roof trusses, bridges, conveyors, and space frames. Tee flange on one edge only allows easy registered assembly for triangular and square sections as pictured at left. Protruding side of flange may be removed if desired. Precision Injection Molded in Dark Gray ABS Plastic.
Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/4
HEIGHT IN MM
19.1mm
WIDTH IN INCHES
1-23/64
WIDTH IN MM
34.5mm
THICKNESS IN INCHES
11/64
THICKNESSS IN MM
4.4mm
LENGTH IN INCHES
11
LENGTH IN MM
275mm
Acrylic Flat Colors - Dark Green - 3/4oz (23mL) Bottle
XF-61
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
Microscale 87-1118 HO Christmas Decals - Greetings of the Season
Grand Trunk Western GP38AC Bicentennial 1976+
HO Scale H1b Hudson Steam - DC/DCC Ready - Canadian Pacific (Delivery) #2816
-Early walkway w/smoke deflectors
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO 50ft 6in Boxcar - N-de-M #101330
Features:
- Prototypical non-terminating corrugated ends
- Diagonal paneled roof
- Single 10-foot YSD design sliding door (non-operating)
- Detailed cross-member attachment rivets on the side sills
- Weighted, detailed underframes
- True scale dimensions with accurate details
- Equipped with AccuMate knuckle couplers
Kit - 4-1/4 x 3-5/8 x 3inch 10.7 x 9.2 x 7.6cm
Typical Modernized Suburban Home Design
Built Coast-to-Coast - Most Still Lived in Today
Detailed Brick Siding
Three Different Front Walls with Appropriate Windows & Doors
Add-on Roof Mounting Pad for Interior Lighting (Available Separately)
Separate Downspouts
Printed Interior Details
Molded in Four Colors & Clear Plastic
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200115
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
HO Milton A. Corporation - Kit
This kit is built up from individual components from several of our existing Pikestuff kits. We have done the kit-bashing for you by providing you with the parts and instructions to build a unique building from the Pikestuff inventory. A small amount of cutting is required without cut lines but cutting the soft plastic is easy and the instructions will guide you through each step along the way.
Dimensions: 4-1/8 X 8-1/4 and 9-3/4 X 11 inches X 7 inches tall.
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Gulf Oil (Repaint) #5024
Built: 11-35
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
HO GP9 - DCC Ready - Great Northern #682
ETA: May 2023
Detailed Information
GN FEATURES:
Winterization hatch with horn mounted on top
Long hood-forward operation
-Nail- style antenna
GN style fuel tank skirts
In 1967, Great Northern introduced a new paint scheme, consisting of blue, white, and dark grey-green. Known as the Big Sky Blue scheme, it took its name from an unofficial nickname for the state of Montana. Several of GNs GP9 locos received the treatment as depicted here.
In 1970, GN was merged with the other Hill roads to form Burlington northern; however, the Big Sky Blue painted units survived for some time after with a simple BN patch.
ROAD NUMBER SPECIFIC FEATURES:
#682
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#683
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#688
Dynamic brakes
bell mounted on long hood
#690
Dynamic brakes
bell mounted on long hood
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
HO 89ft Thrall Enclosed Tri-Level Auto Carrier - Chicago & North Western/ETTX Flat #701623
Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these Walthers Proto models! Introduced in the mid-1970s especially to carry automobiles, the prototypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89ft flatcars with sidesill cut-outs and 28in wheels for added clearance. In service all across North America, the racks carry the owners logos, and most ride on flatcars leased from TTX with ETTX reporting marks.
A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
-Limited edition - one time run of these numbers!
-Prototypes in service from the 1970s to the present
-Factory-installed grab irons
-Separately molded and applied side ladders
-Ultra-smooth rolling metal axles with correct 28in wheels
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24in radius is recommended for operation.
Spray Can - Medium Gray (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
N Scale Under-the-Track Permanent Magnet
Installs under the track for hidden operation!
HO Greenville 86Ft Quad Plug Door Box Car - Building America Repaint 2011+ - Union Pacific (SP) #616541
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Union Pacific (SP) -Building America Repaint 2011+- answers a frequently-requested paint scheme for the modern modelers! Who cannot love the classy Union Pacific graphics? In 1970, Southern Pacific (SP) ordered two different lots of Greenville quad door auto parts box cars (yes, we will offer original SP down the road). While some of these lasted in original SP paint into the 2010s, many of them saw Building America paint in a program fashion. These cars represent the SP cars after painting, and they retain their SP reporting marks but include a full complement of UP stenciling styles, UP shield, and UP Building America graphics. The underframe features accurate Center-of-Car Cushioning details with extended draft gear and this replica rides on 70-Ton Barber S-2 Roller Bearing Trucks with 33inch wheels, rotating -Timken- caps and truck mounted brake details. Each individual car features number-specific data, delineator, and tack board placement. In other words, each is a -little- different! Collect all four while you can, and enjoy this modern-era offering!
Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low profile? Barber S-2-A with Timken rotating caps
Wheels: CNC-Machined 36in Wheels
Detroit Toledo & Ironton (DTI) Delivery 1970 Magenta shows off one of the most-requested paint schemes for the Tangent Greenville 86ft Box Car System. We appreciate the patience of DT&I modelers, as we wanted to get this car right with the correct 1970 Greenville body with accurate DT&I Magenta paint and lettering. This Magenta DT&I group totaled 54 cars ? It was also the first group to be delivered for use in the new Ford Brownstown Parts Distribution facility pool. Yes, these cars were pooled, so that means these beautiful Magenta 86ft giants served Ford US Parts Depots coast to coast in the Ford BRO pool lanes. Note the prototype photo on our website that shows a DT&I BRO car behind a GN painted, BN-restenciled SD45 presumably photographed on BN headed to Seattle. The DT&I cars feature the distinctive Brownstown body style, with extra vertical rivet rows at the ends of the side sheets. An accurate End-Of-Car Cushioning underframe shows off the 100-Ton Low profile Barber S-2-A trucks, 36in wheels and Timken rotating caps.
Soundtraxx 810162- Mini Cube 3 Oval Speaker-Baffle Kit
Soundtraxxs newest speaker is the Mini Cube 3. The Mini Cube 3 is only 12 x 5.5 x 3mm, but the sound it produces will blow your mind!
Dimensions: 12.5 x 5.5 x 3mm(D)
Frequency Response: 800Hz - 20kHz
Power: 0.3 Watts (Nominal) 0.5 Watts (Peak)
Impedance: 8 Ohms
Walthers SceneMaster HO Flexible Self-Adhesive Paved Roadway Vintage Highway (White Dashed Centerline, White Solid Edge Markings)
Code 83 Crossing - Nickel Silver w/Brown Ties - 30 Degrees
also includes four 1inch straight sections
Note - package was opened but was not used in layout
Juneco Scale Models CN Wraparound Pilot
HO Delivery G43A 2-1968 Gondola - Penn Central #576080
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inchh Wheels
PC -Delivery G43A 2-1968- in the original Penn Central green paint scheme, and a PC version we have not yet offered! These gorgeous models have 2 placards in place for the PC reporting marks, road numbers, and ACI label on the left side of the car. On the right side is an additional placard that includes a PC logo and Penn Central lettering. These placards are utilized on this class of PC car since these cars have side corrugations on each panel, where they knew that putting paint on the corrugations would not last very long! These cars have corrugated ends, and the Tangent replica includes oxide red car interiors ? on the interior walls and ends ? like the prototype. We even duplicated the slight green overspray on the inside end corners! The 100-Ton trucks feature accurate rotating -Timken- caps.
HO 89ft Thrall Bi-Level Auto Carrier - BNSF #300285
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
EMD GP40 High Nose w/Sound DCC LokSound- Master Gold - Norfolk & Western (Blue/Imitation Gold) #1329
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake sqeals.
Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
HO International Wide-Vision Caboose - Fort Worth & Denver (1971) #166
(Delivery 1971 w/ Red-Green Lights)
Product: BN International Wide-vision Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber or Gould Caboose Roller Bearing with separate brake beam part as appropriate for each paint scheme
Wheels: CNC-Machined 33 inch Wheels
DC/DCC Lighting Features: Interior Lighting as well as lighted FRA Steady Red Lights
48Ft All Purpose Well Car - TTX #456388
Features:
Floor with correct ovals and cut-outs.
Two hitches
Etched walkways
Four IBC bins.
Detailed brake components
Prototypically accurate paint schemes
Recommended 24inch radius
Squealer - Motion Activated Flange Squeal System
The Squealer is a true motion-detecting flange squeal system. Using professionally recorded and edited flange squeal, the Squealer brings authentic trackside sound of steel wheels against rails for ultimate realism. The system uses a micro motion detector between the ties to sense train movements and play either the built-in professional sounds or user-defined sounds for maximum flexibility. Modelers now have the ability to recreate all the trackside audio ambience that has been missing from our model worlds.
Placed in locations on the layout where flange squeal is most likely to occur, the Squealer takes the immersive layout experience to a new level. Use individually (with one or more sensors) or place several Squealer systems together to get an all-encompassing stereo effect. The professionally recorded and edited built-in sounds provide a basic sound landscape for most situations, but custom sounds can also be loaded using a microSD card. The possibilities are only limited by your imagination!
Features:
- True motion-detecting operation: only squeals when something is moving
- Simple, discrete under-track installation
- Professionally recorded and edited flange squeal sounds play randomly
- Sounds fade smoothly when activated or deactivated
- Custom sounds can be loaded using a microSD card
- Comes complete with sensor, speaker, and control board
- Powered from 5V to 24VDC
- Additional motion sensors available
Typical Applications:
- Mainline curves
- Yards
- Tight industrial trackage
Specifications: (L x W x H)
Control Board: 3.75 x 2.25 x 0.5 inches
Speaker: 1.25 x 1.25 x 1 inches
Motion Sensor: 2.25 x 0.25 x 0.25 inches
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OAKX #31
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Farmers Fertilizer Bulk Plant - Laser-Cut Kit
DIMESIONS:
7-3/8 x 7-5/16 inches (18.8 x 18.5cm)
Add new business alongside your railroad with this Bulk Fertilizer Plant. A familiar sight since the 1940s, these operations receive various dry ingredients in hopper cars, which are moved to inside storage bins through a series of augers and conveyors. Batches of fertilizer are then custom-mixed and loaded into special application machinery for delivery right to the field. Some operations also make and sell smaller batches in bags for gardeners and homeowners. Found all across rural America and Canada, this kit builds into a typical facility that is perfect for layouts from the 1960s to the present.
The kit features laser-cut floor, sub-roof and walls with tab and slot construction. Laser-cut peel-n-stick trim, doors, window glazing and roofing are all included for easy assembly. The kit also includes laser-cut parts for a truck-loading conveyor that can be installed at either end or side. A bucket elevator for hopper unloading, complete with unloading pan, ladder, handrails and control cabinet is also included. A set of signs rounds out the kit.
HO RTR ACF 4650 3-Bay Hopper - Great Northern #171728
Date: 11-66
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO NSC 5277 PD Boxcar - British Columbia Railway #851022
FEATURES:
Bodies: 5111 or 5277 cubic foot styles
Ends: Nine or ten corrugations
Doors: 9ft or 10ft plug doors
Side Sills: Deep or shallow sills
Corner Posts: A special limited run of the Grand Trunk Western cars without the corner posts will be available.
Trucks: 70- or 100-Ton
Suggested minimum radius of 22inch
N Scale NSC 73Ft Centerbeam Flatcar - BNSF #563181
The N Scale NSC 73Ft Centerbeam Flatcar features:
Two top truss configurations; early Z pattern and standard closed pattern with tie-down brackets
Two deck configurations; early with risers and mid without riser
Two underbody configurations
Multiple brake stand options
Multiple truck types
Fully detailed underbodies with brake piping and rigging
Free rolling, metal wheelsets
Multiple end cage variants
Service Van - Speedy Movers
Expected Delivery: March 2020
At the curb or on the job, add color and variety to your HO vehicle fleet with SceneMaster Service and Delivery Vans!
Based on contemporary designs used by all kinds of businesses big and small, youll also find them in the ranks of the fire and rescue service.
Factory painted and printed in full color, the finished models look great on layouts and in collections.
Highly detailed, perfect for layout or collection
Each also includes modeler-applied side mirrors for more realism.
HO NSC Ballast Hopper - Amtrak #11683
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO ACF Type 27/ICC-105 6,000-Gallon Tank Car - Columbia Southern #686
Considered one of the most common early tank car designs, American Car & Foundry (ACF) Type 27 tank cars were built from the late 1920s through the 1940s. These specialized cars were almost always privately owned for revenue service because railroads only used and maintained a few for non-revenue activities like fuel.
These insulated high pressure cars were used often in the transport of the home heating fuels propane and butane as well as anhydrous ammonia, chlorine, and methyl chloride.
FEATURES:
- Beautifully Detailed and Accurately Modeled
- Precision Paint, Color, and Lettering Schemes
- Many Separately Applied Details including Hand Rails, ladders, brake wheel, roof walkway
- Detailed Underbody
- Composition: ABS body, Diecast Chassis
- Wheel Composition: Metal
- Couplers: (2) Operating Kadee Compatible
- Compatible Tracks: Code 83 and 100 Rail
- Minimum Operating Radius: 18 in
Atlas Brush Company 255-200 20/0 Taklon Ultra Mini Brush
HO Bi-Level Auto Rack - Southern Rack/TTX Flat Car #942396
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
GATC 20,000-Gallon GS Tank - HPCX #20048
MODEL FEATURES:
- Fully-assembled and ready to run out of the box
- All models are representative of prototypical paint schemes
- Weighted for trouble-free operation
- Body mounted McHenry operating scale knuckle couplers
- 70 or 100-ton Roller Bearing trucks with animated spinning bearing caps per prototype
- 33 inch (70-ton) or 36 inch (100-ton) machined metal wheels with RP25 contours operate on all popular brands of track
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- 3-Packs feature unique numbers not available separately!
- Highly-detailed, injection-molded body
- Separately applied brake wheel and ladders
- Painted and printed for realistic decoration
- Replacement parts available
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Perfect starting point for adding grime and rust
- Faded base colors matched to the prototype
Algoma Central In Color by Stephen M. Timko
Released February 1, 2016
Headquartered at Sault Ste. Marie, this colorful all-EMD railroad extended directly north from the Great Lakes into the wilderness of Ontario. Although most famous for its passenger trains through the beautiful Agawa Canyon, the road was also a heavy duty freight hauler carrying lumber, mining, and steel products.
HO Utility System - Single-Crossbar Pre-Wired Poles
Description:
Place these HO Scale Single Crossbar Pre-Wired Poles alongside railroad tracks to model telephone poles used for communication on the railroad! They are hand-painted and feature weathered wood poles, guy wires and other authentic details. Pre-Wired Poles can be installed in minutes! Simply drill holes, pull poles out of packaging, slide along wire and plant in place.
HO 36Ft RTR 3-Dome Tank Car - Sunoco #2603
Product Information
Add authentic cars to your steam- or diesel-era layout with these 36Ft 3-Dome Tank Cars from WalthersMainline! Serving a wide range of both producing and consuming industries, these cars were actually three tanks in one, ideal for handling smaller amounts, and a greater variety of product at once. Features of these cars include:
One time run of these roadnumbers, limited quantity available - order now!
Prototypes hauled petroleum, chemicals and similar liquid loads in three compartments
In service from late 1920s to 1960s
Detailed underbody with AB brakes
Fully assembled
Correct 33inch turned-metal RP-25 wheelsets
Proto MAX metal knuckle couplers
Bachmann HO Proses Adjustable Parallel Track Tool - 2 units
This is a very useful track alignment tool designed to keep the same distance between the centers of adjacent parallel tracks. The tool is marked with scales in metric and imperial units with the track center adjustable between 2 inches (50mm) (used for parallel main tracks) and 4 inches (105mm), allowing space for platforms to be built between the tracks.The parallel track tools can be used on straight and curved track, the tools will fit curves of any radius.
2 track tools per pack that can be used in conjunction with FT-HO-01 flexible track tool and PT-HO-02 parallel track tool.
HO ACF 3-Bay Cylindrical Hopper - Cancarb (ACFX) #60247
PROTOTYPE INFORMATION:
Introduced in 1961 by ACF to haul sand, clay, salt, grain and bulk plastics, the Cylindrical Hopper was the first commercially successful
tank-type covered hopper car design. A few of the more than 4,000 cars of this type built through 1966 can still be seen in service today across the United States.
MASTER MODEL FEATURES:
See-through roof walks
Blackened metal wheels
Free-rolling 100-ton trucks
Detailed brake gear
AccuMate couplers
Fine painting and printing
EMD E8A (DC/Silent) Canadian Pacific - Early Maroon: #1802
Rapidos E8 model features:
3D laser-scanned body shell
Accurate nose and roof contours
Seven different noses
Three different back ends
Two different sides – with and without lifting lug covers
Three different steam generator options
36inch fan, 48inch fan or non-dynamic brake options
Single- or dual-headlight configurations
Freight or passenger pilots
Three styles of side grills
Original porthole sides or rebuilt with blanked sides (including unique variations)
Skirted or non-skirted fuel tanks
Original square and sloped or Hyatt roller bearing journal boxes
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Complete lighting effects – headlights, class lights, backup lights, ground lights, cab lights and more
Numerous road-specific detail parts in both plastic and etched metal
Details Include:
Side portholes
No dynamic brakes
Single MU door nose, right of headlight
Passenger pilot
Standard rear
Early-style square bearing trucks
Dual steam generator, closely spaced
Horizontal grill
Side skirts
HO GE C30-7 - DCC Ready - Conrail #6600
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
HO EMD SW900 - LokSound 5 Sound & DCC - Soo Line #325
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- ESU LokSound 5 sound for DCC and DC layouts
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20360
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO 60ft Hi-Cube Plate F Boxcar - BNSF #761313
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline(R) 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
All Scale BD20 - Block Detector Module
The BD-20 block detector module is normally used to indicate the presence of a locomotive, caboose or other rolling stock in a track section by sensing electrical current drawn by that rolling stock. Locomotives will naturally trigger the detector because they draw current through their DCC decoder. Unpowered rolling stock will not trigger the detector unless equipped with some means of drawing current from the rails such as lights or resistor wheel sets.
The BD20 needs to be as close to the section being detected as possible to avoid false detection triggered by long runs of cable. For the BD20 to work correctly ALL feeders for the section being detected must go thru the BD20. The best practice is to have one BD20 per feeder, and only one feeder per section of track. That section should be isolated from all other sections by using gaps or insulating rail joiners.
The BD20 acts like a normally open switch that gets triggered by sensing current going thru the coil. In a typical application you connect the outputs of the BD20 to something (Logic + 5 to 12vdc) that will react to a ground short. we use it to trigger the inputs of the AIU. Most signal systems work the same way.
The BD20 is a detection device and cannot drive a signal directly unless you want to use the external LED connection in some fashion. An AIU is an input device that detects a 5v line being shorted to ground, such as the output of a BD20. The AIU then puts this information on the NCE Cab Bus. Neither device (BD20 or AIU) are directly related to signaling. They do detection and notification.
HO 89Ft Bethlehem Flush-Deck Flatcar - TTX WTTX #157236
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers
HO F30A 50Ft Flat Car - Undecorated Single Car
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
N Scale 36ft Wide-Vision Caboose - N&W #518696
The Wide-Vision Caboose (also known as Extended-Vision Caboose) was designed with a wider cupola projecting from its sides. After World War II, train cars began to be taller and wider than their predecessors. The extended cupola assisted the trains crew in seeing beyond both the tops and sides of the train cars ahead. This caboose design saw service on most U.S. Railroads. Bachmanns Wide-Vision Cabooses are fully assembled and come in a variety of colors and road names.
FEATURES INCLUDE:
- highly detailed painted bodies with precision graphics
- blackened machined metal wheels with RP25 contours
- magnetically operated, body-mounted E-Z Mate Mark II couplers
- non-magnetic blackened brass axles with needle-point bearings
- Celcon trucks
- added weight for optimum tracking performance
- N scale 1:160
HO Scale GP38 - DC/DCC Ready - Southern (High Nose) #2785
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX(6 pkg) #5
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
16000
16019
16027
16051
16071
16084
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 40ft Hi-Cube Corrugated Side Container - CMA-CGM
(New Logo)
This Walthers SceneMaster HO Scale 40ft Hi-Cube Corrugated-Side Container will add a modern touch to your intermodal terminals, highway scenes and railroad operations. Ready for service on your layout as loads for WalthersProto and WalthersMainline well cars and container flatcars, additional features of these 40ft Corrugated Containers include:
- Improved door latch detail
- Great detail for terminals and industrial scenes
- Realistic loads for any well car
- Ready to use
60ft Pullman-Standard Flatcar - Ready to Run -- TTX HTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - GAXX #6460
AN OTTER VALLEY EXCLUSIVE!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO GE 44 Tonner Phase III Body - DC/DCC Ready - Generic Industrial: Red
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
RTR 50 Ft NACC Box - DM&E #5534
MODEL FEATURES:
Three road numbers
Applied metal grab irons and etched end platforms
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Weighted for trouble free operation
Ready-To-Roll 70 ton trucks
Machined 33In metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Minimum radius: 18In
HO ACF 4600 3-Bay Centerflow Hopper - Grand Trunk #138190
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
N Scale Graffiti Decal Set - Irish and Scottish Graffiti - Waterslide Decals
HO B-50-15 Boxcar - As Built w/ Murphy Roof - Southern Pacific (1946 to 1952 scheme) #15102
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
40 Ft Modernized Box - NSRC 3pk
Era:1970s+
MODEL FEATURES:
Fully assembled and ready for your layout
Underbody with brake system details
Many of these schemes were frequently in lumber service. On the prototype, it was common to find these in strings of 4 or more within a lumber train.
New 3-packs make modeling lumber service easy (total of 6 unique road #s)
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE AND BACKGROUND INFO:
Railroad boxcars are perhaps not only the best-recognized pieces of equipment ever put into service but also one of the most identifiable symbols of the industry itself. During the early years of the industry freight was hauled on simple flatcars or early gondolas. In Upstate New York was the burgeoning Mohawk & Hudson Railroad, the first chartered system in the United States which later became part of the New York Central, came up with the novel idea of covering its gondolas in 1833 since the railroad dealt with snow throughout much of the winter. The cars development continued to improve over the years such as switching from basic wood construction with steel outside-bracing, within the same size specifications; 40 feet, a standard size employed by the American Association of Railroads (AAR). To better enhance crew safety, in 1968 the AAR legislated the removal of roof walks. The 40 foot boxcars needed to be -modernized- to adhere to the AAR mandate. This was to be completed by 1978 for cars in interchange service. Some of these cars had side and end ladders cut down, in some cases, modification included lowering the brakewheel. What made boxcars great, at least in the eyes of the railroads, was, their ability to haul about anything! Railroads thrive on redundancy to maximize efficiency.
HO GMD SD40-2 - DCC & Sound - CP (Expressway) #5745
Product Information
This Bowser Executive Line GMD SD40-2 is based on the huge fleet of diesels constructed by the General Motors Diesel Division plant in London, Ontario for several Canadian railroads, and a few US lines as well. This finely detailed model features GMDD and railroad-specific details, accurate decoration, operating headlight, can motor, brass flywheels, nickel-silver wheels with RP25 flanges and knuckle couplers.
Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound Select decoder. Analog (DC) version has 21 pin socket for DCC module.
Bowser does not recommend LOK sound locos for use on DC layouts.
Features LokSound Select decoder, GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, Flywheels, Can motor, RP25 flange, KD couplers
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
40Ft Corrugated Container P and O Nedlloyd 2 pk
12413(2)/133157(0)
Diesel Locomotive Winterization Hatch - 48Inch FAN - GP60 & SD60 - pkg(1)
HO Gunderson 6276 50Ft Plate F Boxcar - TTX (2016) #506729
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
HO Scale GP38 - DC/DCC Ready - Southern (High Nose) #2771
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO Hydraulic Excavator - Orange
HO AutoFlood III RD Coal Hopper - CEFX (6pk) #3
Includes the following numbers, all individually packaged:
#600600
#600612
#600626
#600644
#600568
#600673
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO GP18 - DCC & Sound - Lehigh Valley #302
Detailed Information
LV FEATURES:
Nathan 3-chime horn
Dynamic brakes
Winterization hatch
Forward facing fuel tank
Pilot mounted footboards
One of the anthracite roads of the northeast U.S., Lehigh Valley bought four GP18s (built in mid-1960) numbered 302-305. The units served throughout the 1960s and into the mid-1970s. Lehigh Valley was folded into the U.S. governments bailout of Penn Central and became a founding member of Conrail in 1976. The collection of four GP18s went on from Lehigh Valley to serve Conrail as 7496-7499. The units initially wore patched out Lehigh Valley dress with -CR- markings and all eventually saw repainting into Conrail blue. Among the four GP18s, 304 was rebuilt with a chopped nose during the time it worked for Lehigh Valley; the other three retained high short hoods.
ROAD NUMBER SPECIFIC FEATURES:
#302
1964 era Tuscan red scheme
#303
1964 era Tuscan red scheme
#305
1971 era Cornell Red scheme with large letters and barrier stripes. Modified -cut- conductors side skirt
Long hood mounted paper air filter box
Flat-top dynamic brake fan
GP18 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Accurately-painted and printed paint schemes
Body-mounted McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Conrail Northern Region In Color - Douglas N. Leffler
RELEASED: February 1, 2017
Conrails Northern Region was comprised of three divisions of the former Canada Southern Railway and Michigan Central Railroad routes through Canada and Michigan. These three Conrail divisions were called the Canada Division, Detroit Division and Michigan Division. The illustrations and text in Conrail Northern Region take the reader on a journey on all three divisions from Niagara Falls, Ontario, Canada west to Detroit and beyond through Southern Michigan.
HO EMD GP39-2u - DCC & Sound - Santa Fe ATSF #3415
Detailed Information
ATSF FEATURES:
New Santa Fe phase 1 GP39-2u body with corrugated grilles - First time in Genesis!
Illuminated -Swing out- style number boards
Stratolight Beacon (effect in DCC)
Newly tooled exhaust stack
Removed class lights
-Switcher- style walkway steps
Rear mounted fuel tank
Large front anticlimber
Starting in 1986, Santa Fe rebuilt 50 GP39-2s in their Cleburne, TX shops, designating them as -GP39-2us-. The -u- stood for -upgrade- which was a common term for Santa Fe rebuilds during this time. Other than the mechanical and electrical upgrades, Santa Fe added some unique details that distinguish these from their non-rebuild counterparts. These changes include: Fuel tank moved to the rear, new -swing out- style number boards, new style exhaust stack, and added an equipment door to the right side hood, just behind the cab. They also featured -switcher- style walkway steps for crew comfort during switching moves. A few even received modified corrugated radiator grilles.
ROAD NUMBER SPECIFIC FEATURES:
#3409
PH 1 body with chickenwire grilles
Leslie 3-chime horn
added access equipment door behind cab
#3415
PH 1 body with chickenwire grilles
Leslie 3-chime horn
added access equipment door behind cab
#3418
New PH 1 body with corrugated grilles
Nathan 3-chime horn
added access equipment door behind cab
GP39-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Portec 3000 Covered Hopper - WINCHESTER & WESTERN #1017
Features:
- Ready to run
- Injection molded plastic
- Fine scale detail with many separately applied parts
- 2 Body and roofwalk variations to accurately match the prototype
- 2 styles of vibrator brackets
- Highly detailed end cages and brake gear
- 100 Ton Trucks
- Metal Couplers
- Etched metal roofwalks and end platforms
- Crisp painting and printing
HO FMC 60ft DD/SS Hi-Cube Boxcar - CSX #166701
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
MODEL FEATURES:
- Double 8 foot Youngstown doors
- Photo-etched coupler cross-over platform
- Separately applied grab irons, end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for trouble-free operation
- Body-mounted McHenry operating scale knuckle couplers
- 70 or -100 ton roller bearing trucks with 33 or 36 inch wheels per prototype
- Machined metal wheels with RP25 contours
- Minimum radius: 18 inches
HO EMD GP7 - DC/DCC Ready - Precision National PNC #1508
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
PNC FEATURES:
Different wheel bearing styles per prototype
Full skirts
1200-gallon fuel tanks
Sunshades
Cut levers
In the early 1970s Precision National was a one of the first companies that remanufactured diesel locomotives and then leased them out to railroads that needed them to bolster their fleets when they were power short. Their shops were located in Mount Vernon, IL which later on became the home for National Railway Equipment, a company that became a major supplier of leased and rebuilt diesels locomotives. PNC developed a uniform green and yellow paint scheme for their lease fleet that could be seen around the country.
ROAD NUMBER SPECIFIC FEATURES:
#1508 Front nose oscillating signal light (functions in DCC), spark arrestors, non-dynamic brake hatch
#4207 Foot board pilots, Dynamic brakes, Tall MU stands
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Peco SL380F - N Scale Code 55 Insulfrog Single Slip
Peco SL-380F Finescale Insulfrog Single Slip
Nominal radius 511mm, angle 10 degrees, length 154mm.
Finescale Code 55 can be connected to Universal Code 80 Streamline track and is suitable for all makes of N scale trains, but please note that Code 55 geometry is different from Code 80 and, therefore, cannot be used as direct replacements.
For joining, use SL-310 or PL-82 pre-wired metal rail joiners to electrically join or SL-311 nylon rail joiners where an electrical break is required.
Fitted with an over center spring for immediate hand control it automatically isolates the track not in use.
For remote control on permanent layouts, two point motors such as Peco PL-10 or Seep PM-2 can be fitted.
Can be fixed with SL-14 track pins.
To assist in layout planning, full size turnout plans are available to download from the Peco website.
HO EMD GP40 - DCC Ready - Canadian National (Stripes) #4016
1978+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO 13,600 Gallon Acid Tank Car - Procor/White (PROX) #16522
ETA: July 2023
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Enamel Product.
A new high quality enamel product, developed for scale aircraft models, with an improved flow for easy creation of depth, and emphasis of surface detail. Forget complex mixes or infinity of colors. This product is perfectly suitable for aircraft models which are painted in grey or blue schemes, or carrying camouflage patterns composed of both of these colors.
HO GMD SD40-2W - DC/DCC Ready - Canadian National (Sergeant Stripes) #5336
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
Early - Staley #35094
HO CA-9 ICC Caboose w/Lights w/DCC & Sound - Union Pacific #25658
ETA: August 2021
Detailed Information
PROTOTYPE AND BACKGROUND INFORMATION
Built by International Car Company in 1967, UPs CA-9 class numbered 100 cabooses. The cars were very similar to the earlier CA-8 and later CA10 designs, but had minor differences in end cages and windows. The cars originally featured square safety slogans, and these were later changed to rectangular slogans. The eye-catching safety slogans made the cars distinctive; the later slogan boards were removable and could be swapped from car to car, meaning that certain road numbers wore several over the course of their lives.
ROAD NUMBER SPECIFIC FEATURES:
#25658, 25668, 25661 Early slogans, P on cupola representing Pool service,unique scheme with 14 inch reporting marks and 8-inch -Union Pacific-, as- built or modernized cupola windows as appropriate
#906251 MOW Office car, painted -Kenefick green,- Era: 1990s+
#25629, 25616 Later rectangular slogan boards, red P on cupola representing Pool service, modernized windows, Era: late 1970s+
HO Single-Track Railroad Bridge Concrete Piers 2-Pack - Kit
Product Information
This Walthers Cornerstone HO Scale Single-Track Railroad Bridge Concrete Pier kit is perfect for use with Cornerstone single-track bridges and is part of the Cornerstone HO Scale Engineered Bridge System. This kit can be built with or without a cutwater and molded cut lines allow you to customize the height to fit your bridge height. The kit includes parts for two single-track concrete bridge piers and comes molded in a concrete base color.
Part of the Cornerstone HO Scale Engineered Bridge System.
Common prototype design used with various types of bridges
Fits steam, diesel and modern eras
Use with Cornerstone single-track railroad bridges (sold separately)
Simulates poured concrete construction
Build with or without cutwater ends for extra realism
Adaptable to other bridges
Parts for two complete piers
Molded cut lines for easy height adjustment to 4-11/32, 3-15/16, 3-1/2, 2-3/4 and 1-31/32inch 13, 11, 9, 7 & 5cm
PLEASE NOTE: If you are planning on installing piers with the wider Single Track Truss Bridge (933-3185, sold separately), use the Double-Track Railroad Bridge Concrete Pier 2-Pack (933-4552), sold separately.
70-Ton Truck w/Electrical Pickup (2)
Key Features
Genesis detail with animated/spinning roller bearing caps
Pickups and soldered wires for DCC decoder and other electronic animations
Machined 36inch wheels with .110 tread
Works with code 55, 70, 75, 80, 83, and 100 rail sizes
Fully assembled and ready to install
HO RTR 45Ft Fruehauf Z-Van Trailer - Denver & Rio Grande #230081
Detailed Information
MODEL FEATURES:
Separately applied mud flaps
Rubber tires
Fully-assembled and ready to use out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
12inch Long Round Aluminum Rod - 3/32 inch Diameter
Round Aluminum Rod - not hollow (1 pc)
Outside Diameter: 3/32 inch
HO BiLevel Commuter Car - UTA FrontRunner - Set #2
Salt Lake City
Includes: Cab: 109 Coaches: 201, 208 (Series 4)
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO Ice Skaters (6 pkg)
Details Ice Skaters
Now, Off to the Ice!
The NOCH H0 winter figures -Ice Skating- should not be missing from a wintery model landscape! In winter, there are many types of sports that draw people outdoors – skiing, sledging, ice skating, snowboarding, tobogganing, snowshoeing and much more. All of these are popular winter attractions that should not be missing on a snow-covered landscape.
Ice skating on the slippery ice is fun for everyone and this joy should not be missing on a diorama during the cold season! Because it makes everyone happy.
PS-2 2003 2-Bay Covered Hopper - Southern Pacific #401509
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
Lumberjacks - Scenic Accents(R)
HO NSC 64 Ft 6000 Cubic Gondola HS - MWCX #102797
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
60ft ACF Auto Parts SD Box Car Canadian National
MODEL FEATURES:
- 70-ton roller-bearing trucks with blackened metal wheels and adjustable screws
- Authentically painted and lettered detailed body with sliding doors and distinctive “Precision Design†recessed panels
- Prototypically designed roof and ends with full rivet detail
-Detailed die-cast metal underframe for improved operation
-Separate brake system and air reservoir
- Cushion underframe with extended coupler pockets
-Accurate painting and printing
- AccuMate operating knuckle couplers with mounting screws
- Roof overspray
60 ft NSC 5150 3-bay Covered Hopper - Illinois Cereal Mills Cargill ICMX #1032
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. They have worn a wide range of colorful paint and lettering schemes over the years, 59ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59ft Cylindrical Hoppers feature:
Limited Edition - one time run of these roadnumbers!
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36In turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers
1746 Morning Sun Books Inc. Chesapeake & Ohio Power In Color Volume 1
Features the switchers, Es, and Fs of the company?s fleet! From the single GE 44-tonner through the Alco and EMD/GMD switchers, as well as the fleet of narrow-gauge Atlas and GE dock pushers. Photos of varnish and freight power include E7s and E8a, F7As, F7bs, and FP7s
HO New Look Bus - GO Transit (Toronto) Late - Hamilton via Lakeshore - Deluxe #1033
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
10Ft 6In Modified 1937 AAR Boxcar - Erie - Large Herald #80284
N Scale NSC 5277 50Ft Plug-Door Boxcar - British Columbia Railway #851012
MASTER MODEL FEATURES:
Bodies: 5111 or 5277 cubic foot styles
Ends: Nine or ten corrugations
Painted safety rails
Doors: 9ft or 10ft plug doors
Side Sills: Deep or shallow sills
Trucks: 70- or 100-ton
HO Flexible Self-Adhesive Paved Roadway - Vintage and Modern Curves
FEATURES:
- Model North American roads in minutes
- Realistic surface color with correct striping for US roads in various eras
- Ready to use, self adhesive and flexible - easy to add to new or existing scenery
- Mix and match with other roadway sections, each sold separately
Pave HO scale roads, streets, and highways quickly and easily with Walthers SceneMaster flexible self-adhesive paved roadway sets! Made from a unique flexible material that is self-adhesive, simply combine straight sections, and curves, or cut to fit and press in place. Each features a realistic surface color, as well as appropriately colored centerlines and fog lines along the outside edge of the pavement for modern or vintage paved roadways.
Combine this set of SceneMaster curves with straight sections (each sold separately) to simplify roadway installations in new or vintage scenes. Features solid double yellow centerlines to indicate no passing zone, and solid white edge markings. Easily cut to various sizes. Measures 3-1/8 inches wide with 9 inches outside diameter.
13/32 inch Vertical Railing (2pcs)
Use for hand rails, stair rails, roof trusses, grating and other steel structures. Precision Injection Molded in Styrene Plastic. May also be used for trellises, fencing window bars, etc.
SCALE
ALL
MATERIAL
STYRENE
COLOR
VARIOUS
HEIGHT IN INCHES
13/32
HEIGHT IN MM
10.3mm
WIDTH IN INCHES
3/32
WIDTH IN MM
2.4mm
THICKNESS IN INCHES
.050
THICKNESSS IN MM
1.3mm
LENGTH IN INCHES
6-7/8
LENGTH IN MM
175mm
Diesel Detail Kit for EMD SD50 & SD60
Make your Walthers Mainline locos even more realistic in minutes with this Diesel Detail Kit! The complete set of HO grab irons fits the standard locations on the model, and they are made of durable, factory-formed stainless steel wire. The set details one model and includes illustrated instructions.
Parts in this set include:
Fan guard grab iron
Blower duct grab iron
11 standard drop grab irons: four for short hood, seven for long hood
HO 40Ft Wood Reefer - Canadian National #207027
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch
HO PC&F 5241 CUFT - Boxcar - Saratoga & North Creek (SNC) - Single Car #3391
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Gunderson 6276 50Ft Plate F Boxcar - Illinois Central IC #21018
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
HO Telephone Boxes
All metal - 12 per pack
Assorted Shortlines - Quebec Southern Hood Unit Diesels (1996+)
Tangent Scale Models HO PS4750 Covered Hopper ROCK -Delivery Blue 6-1978
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ROCK -Delivery Blue 6-1978- is available in the Blue Original 1978 scheme. Our -R- black and white logo and blue color is stunningly executed, check it out for yourself. ROCK lettering done right is something to behold, with accurate data stencil breaks and careful duplication of ROCKs data style. This is Tangent-accurate hand-drawn artwork. We have also matched the 1978 ROCK details including body-mounted brake center sill linkage, Miner outlet gates, a Universal hand brake and matching Universal brake wheel.
Modern Coaling Tower
Authentic American Prototype
Serves 3 Tracks
Coal Delivery Shed
Loaded with Separate Details
Decal Signs Included
HO 57Ft Mechanical Reefer - Union Pacific (American Refrigerator Transit ARMN) #756065
Product Information
Move all kinds of perishable products on your HO railroad with WalthersMainline 57Ft Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s. Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including:
One time run of these roadnumbers, order now - limited quantity available
Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
Keystone or Hydra-Cushion underframe detail as appropriate
Short ladders and low hand brakes
9Ft Youngstown plug door with separate latch bars
Authentic Stanray peaked, ribbed roof with capped exhaust stack
Detailed underbody with brake gear and fuel tanks
70-ton roller bearing trucks
Correct 33Inch RP-25 turned-metal wheelsets
Proto MAX metal knuckle couplers
HO RTR 48Ft Containers - ITEL #1 (3pkg)
Detailed Information
MODEL FEATURES:
Fully assembled
Easily stackable
Each container is individually numbered
Goes perfectly with the Husky Stack Car
HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - CSX #242026
Product Information
Serve a wide range of HO industries with the 37ft 2980 Cubic-Foot Two-Bay Covered Hoppers from WalthersMainline. Based on prototypes introduced in the late 1980s, they can be found hauling cement, fracking sand, roofing granules and similar loads. Features of the layout-ready models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from late 1980s to the present
Separately molded and applied hopper gates
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
N Scale 3230 Covered Hopper - Chicago Freight Car (CRDX) #3100
Features:
- All new tooling
- Ready to run
- Injection molded plastic
- Fine scale detail
- Etched metal roofwalks
- Crisp painting and printing
- Magnetic couplers
- Metal wheelsets
The Trinity 3230 Pressure Differential (PD) covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
HO Air Filter Assortment - Plastic
HO Ranch Tract House - Kit
GATC 20,000-Gallon GS Tank - QLF/GATX #41536
MODEL FEATURES:
- Fully-assembled and ready to run out of the box
- All models are representative of prototypical paint schemes
- Weighted for trouble-free operation
- Body mounted McHenry operating scale knuckle couplers
- 70 or 100-ton Roller Bearing trucks with animated spinning bearing caps per prototype
- 33 inch (70-ton) or 36 inch (100-ton) machined metal wheels with RP25 contours operate on all popular brands of track
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- 3-Packs feature unique numbers not available separately!
- Highly-detailed, injection-molded body
- Separately applied brake wheel and ladders
- Painted and printed for realistic decoration
- Replacement parts available
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Perfect starting point for adding grime and rust
- Faded base colors matched to the prototype
Yellow Flowering Foliage - Covers 100 Square Inches
A great way to model wildflowers or create flowering bushes and add a splash of color anywhere on your layout! Available in two colors; Lavender and Yellow. Use for modeling flowerbeds along the railroad tracks, in fields, on hillsides or around buildings.
HO 45ft CIMC Container - DHL
(yellow, red)
FEATURES:
- Based on common size & style used worldwide
- Fully-assembled & ready to use
- Colorful paint & lettering schemes
- Separate door latch details
- Realistic loads for WalthersMainline(R) & WalthersProto(R) well cars, sold separately
- Great detail for terminals, highways & industrial scenes
HO Lightweight Coach - CNR - 1954 Scheme #5635
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
PRR X31A Single-Door Boxcar: Plain Keystone - Single Car #70008
(1961-1968)
Detail Variations:
6-pack includes the following numbers:
#68377
#70008
#70094
#70178
#70274
#76625
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
HO 57ft Trinity 4750 3-Bay Covered Hopper - CSX #259536
FEATURES:
- One-time run of these roadnumbers, order now - limited quantity available!
- Prototypes introduced in 1990 - thousands still in service today
- Clerestory-style roof
- Late Trinity-style jacking pads and pulling tabs
- 1990s-era square cornered roof hatches
- Detailed hopper gates with vibrator brackets & outlets
- Perfect for serving Cornerstone(R) grain elevators, sold separately
- 100-ton trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Santa Fe ATSF #305104
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
40Ft Corrugated Container Hyundai 2pk
HDMU #478170(5) and 478998(5)
85ft General American G85 Flatcar - Trailer Train - GTTX - Yellow #300438
Product Information:
Limited edition - one time run of these road numbers
Prototypes handled trailers and containers from 1961 to mid-1980s - used for general service loading into the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in up or down position or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
33In turned metal wheelsets
Proto MAX metal knuckle couplers
Add more realism in minutes with SceneMaster trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24In
N Scale 53Ft Containers - EMP (EX-HUB) Set #1 (3 pkg)
Road Numbers: 200437, 200456, 200471
FEATURES:
Side corrugations with an 8-55-8 arrangement
Front wall with 10 vertical corrugations
Roof with 6-54-6 corrugations
1-3-1 beveled doors
Placard holders on front wall, sides and door
Each set comes as a 3-pack w/different road numbers
HO Code 88 - 33in Diameter Ribbed Back Metal Semi-Scale Wheels - Freight & Passenger (12)
Ribbed wheelsets are most commonly found on steam era rolling stock. Kadee wheel sets are manufactured to the most exacting standards and feature: RP-25 contour, non-magnetic metal wheels and insulated needlepoint axles.
Axle Tip to Tip: 1.018 in
HO Horizon Dinette - Amtrak (Phase lll - Wide) #53503
PHASE SPECIFIC FEATURES:
- Full dinette interior
- Original powered sliding end-doors
- Fold-down steps (in closed position)
GENERAL FEATURES:
- Coach, Dinette, Club-Dinette car body styles
- All-new ADA Coach cars
- All-new car numbers
- Full underbody and interior detail
- Correct GSI G70 trucks with metal wheelsets and reliable power pickup
- Accurate painting and lettering
- Tinted windows
- Improved interior lighting in both DC and DCC
- Independently-controllable end marker lights
- Metal side grab irons
HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) #485444
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #78
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Norfolk & Western Rack & Flatcar #412007
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
Fox Valley Models N Bi-level Auto Rack
Union Pacific
Features:
Die-cast underframe
Finely Molded Details
Etched Metal Panels
Formed Wire
Sharp Painting & Lettering
Multiple Road Numbers
Die-Cast Underframe
Metal Wheelsets
Micro-Trains Trucks & Couplers
Dual Headlight Brass w/Vertical Shield
Painted Unlettered - (black)
This Bachmann Silver Series(R) Scale Test Weight Car is a model of typical the diminutive cars used to calibrate track scales used for measuring car and load weights. They were used to check axle load limits and to determine the billing of customers for cargo loads. Scale Test Car features a die-cast metal body with realistic decoration, metal wheels and body-mounted E-Z Mate(R) magnetic knuckle couplers.
RTR 52Ft Mill Gondola, GONX/ RailGon #310584
MODEL FEATURES:
Fully assembled and ready for your layout
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
33In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
Open top cars, such as gondolas, have been a mainstay on railroads for decades as they are ideal for carrying large, bulky loads such as coil steel or scrap metal loaded by crane.
20Ft Corrugated Containers with Corrugated Doors, Safmarine 2pk
707424(8) and 77792(9)
HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) #742975
1935+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO Value Line RTR - 13 Panel Coalporter - Conrail Quality #505425
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO EMD FT A+B Set - DC/DCC/Sound - Boston & Maine (B&M Maroon Scheme) #4212A + 4212B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO RTR SW1500 Switcher - DCC & Sound - Wisconsin Central #1569
ETA: January 2023
Detailed Information
WC FEATURES:
Weed Cutter style plow
MU hoses
Whip style antenna
Flexicoil Trucks
Full Cab interior
All-weather cab window
1,100 gallon fuel tank
In the late 1990s Wisconsin Central purchased 3 ex-SP SW1500s from the Indiana Harbor Belt Railway. These three units were refurbished and repainted in WC colors.
SW 1500 LOCOMOTIVE FEATURES:
Detailed cab interior
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Drop steps unless noted
MU stands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Exhaust stacks
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
Printed numberboards
Fine scale handrails
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Woodland Scenics Static Grass 7mm 624 Straw
Rapido Trains Bits HO Scale Container Air Conditioner, just heating box, not container
HO 40ft 16K Gallon Tank Car - Cargill/CRGX #4531
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO NSC 64 Ft 6000 Cubic Gondola HS - NMPX/ Niagara Metals #2369
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Russell Snowplow - Ready to Run - Great Northern #X-1520 (Big Sky Blue)
Product Information
Take on winters worst with a WalthersProto Russell Snowplow on the job! In service since the 1920s, all-steel plows like this are a must have for railroads big and small, and look great spotted on a siding or near the engine shed during the warmer months too! Completely retooled and superbly detailed, each HO Scale model features:
Limited edition - one time run of these roadnumbers!
Prototypes in service 1920s to present
Fully-assembled, railroad ready - undecorated kit also available
Factory-installed grab irons
Complete underbody w/brake gear & piping
Custom front truck for tighter curves
Detailed flanger
Thin profile stirrups
Window -glass-
Ultra-Smooth rolling metal axles and 33inch wheelsets
Proto MAX(TM) metal knuckle coupler on rear of plow
Railroad-Specific Details:
See-through -steel- or original -wood- running boards
Sturdy hinged & positionable side wings in two styles w/wire cross braces
Fitted w/original or one of three styles of late headlights as appropriate
Bettendorf or roller bearing rear truck
HO Industrial Mix Tanks Load
High Levels of Detail
HO Scale
Cast Resin
Gray Paint
Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low profile? Barber S-2-A with Timken rotating caps
Wheels: CNC-Machined 36in Wheels
Detroit Toledo & Ironton (DTI) Delivery 1970 Magenta shows off one of the most-requested paint schemes for the Tangent Greenville 86ft Box Car System. We appreciate the patience of DT&I modelers, as we wanted to get this car right with the correct 1970 Greenville body with accurate DT&I Magenta paint and lettering. This Magenta DT&I group totaled 54 cars ? It was also the first group to be delivered for use in the new Ford Brownstown Parts Distribution facility pool. Yes, these cars were pooled, so that means these beautiful Magenta 86ft giants served Ford US Parts Depots coast to coast in the Ford BRO pool lanes. Note the prototype photo on our website that shows a DT&I BRO car behind a GN painted, BN-restenciled SD45 presumably photographed on BN headed to Seattle. The DT&I cars feature the distinctive Brownstown body style, with extra vertical rivet rows at the ends of the side sheets. An accurate End-Of-Car Cushioning underframe shows off the 100-Ton Low profile Barber S-2-A trucks, 36in wheels and Timken rotating caps.
HO H-6-G - DCC & Sound - Canadian National Railway (Straight Wafer) #1383
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO ACF 2970 Covered Hopper - Rock Island (3pk)
MODEL FEATURES:
-Round or trough hatches
-Photo-etched metal roof walk
-Separately applied wire grab irons and stirrup steps
-Separate brake cylinder, valve and air reservoir with wire brake plumbing
-Detailed outlets
-Multiple road numbers
-Fully-assembled and ready-to-run out of the box
-Accurately painted and printed
-Highly detailed, injection molded body
-Separately applied brake wheel
-Machined metal wheels
-Screw mounted trucks
-Body mounted McHenry operating scale knuckle couplers
-Weighted for trouble free operation
-Wheels with RP25 contours operate on all popular brands of track
-Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
-Minimum radius: 18in
PROTOTYPE INFORMATION:
The 2-bay covered hopper first entered service in the 1950s. The cars handle loads such as cement, sand and similar denser bulk commodities. In the 1960s, American Car and Foundry introduced the Centerflow design. The Centerflow relies on the cars rounded body to provide structural strength without the added weight of bracing, as well as making gravity unloading easier. This 2-bay car came in a 2,970-cubic foot capacity.
HO Scale GP38 - DC/DCC Ready - Norfolk Southern (High Nose w/ Ditch Lights) #2768
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
Peco Code 83 HO Streamline #4 Electrofrog Wye Turnout, 4th Radius
In celebration of the 50th anniversary of Bay Area Rapid Transit (BART) in 2022, Rapido Trains is very pleased to be bringing you the BART Legacy Fleet in HO Scale! Produced in close collaboration with the Bay Area Rapid Transit, this represents Rapidos first foray into the rail-based rapid transit market!
Since its opening in 1972, Bay Area Rapid Transit trains have moved commuters and riders around the San Francisco Bay Area using these iconic cars. These pioneering cars were designed specifically to reduce association with aging transit equipment used in other cities. Instead of using traditional railcar manufacturers, BART signed a contract with Rohr Industries to create their first transit vehicles and contracted industrial design firm Sundberg Ferar to develop the trains futuristic look. Besides being recognized for its status as a ground-breaking achievements of civil engineering, BART is also known for its roster of very distinctive rolling stock. The original cab and center cars (A Cars and B cars) built by Rohr Industries between 1968 and 1975 were mechanically identical, with the exception of the cab overhanging one end of the A cars. Despite being the face of the system, the streamlined fiberglass cab became an operational issue as they limited
flexibility in building trainsets. To resolve this, the first of the C Cars were delivered in 1987 by Alsthom, featuring a more traditional flat cab, allowing them to be used both on the ends as well as in the middle of the consist. Additional C Cars were built by Morrison- Knudsen between 1994 and 1996. BART has run these trains for 50 years, with the external appearance largely unchanged since the initial concepts toured around the Bay.
With BART structures paralleling the Santa Fe, Southern Pacific, and Western Pacifics Bay Area lines, these have continually served as a sharp contrast to the often grimy freight service through the area, with sleek aluminum cars flying past freight drags and commuter service on elevated viaducts paralleling the railroad right-of-way
Each Rapido BART Car features:
- Designed from original blueprints, design drawings and field measurements.
- Track-powered flicker-free interior lighting compatible with DC and DCC layouts.
- Directional lighting, including headlights and red tail lights.
- NEM-style close-coupling system, so your cars always remain as close as possible through any trackwork.
- Minimum 18in radius (22in radius preferred).
- Full, multi-color interior detailing.
- Low-profile drive system in A and C cars allowing for a complete interior with no visible motor.
- Full underbody detail including separate electrical lines, conduit and equipment boxes.
- Highly-detailed, non-operating couplers on A and C cars.
- DCC-equipped models feature accurate sound recordings
HO SP 3/4 Dome-Lounge w/Fluted Sides - Southern Pacific (Overland) #3602
-Overland Style
Rapidos SP Dome Lounge Cars Features:
Designed from original blueprints and field measurements of existing cars
Two fully-detailed interior configurations
Multi-colour interior decoration
Two underbody arrangements
Accurate interior and exterior paint and decoration
Full flicker-free track-powered interior lighting
Lighting (prototypically) in the dome roof
Accurate free-rolling trucks
Metal magnetic knuckle couplers
HO EMD MP15AC Diesel - DCC Ready - GMTX GATX #333
GMTX FEATURES:
Ground lights
Road number specific features
Front and rear ditch lights
Cab-mounted A/C
GATX operates a fairly large lease fleet of locomotives to help service any railroads needs. We are offering full repaints from a range of different schemes used. Being leased as needed, these locomotives could be seen used all over the country, including Mexico and Canada.
ROAD NUMBER SPECIFIC FEATURES:
#319 Ex-SOO/MILW, All black repaint, cab-mounted 3-chime horn, frame-mounted bell, dual Xenon strobes (effect in DCC), small fuel tank, ratchet brake
#333 Ex-SOO/MILW, Light blue/black repaint, cab-mounted 3-chime horn, frame-mounted bell, dual Xenon strobes (effect in DCC), small fuel tank, ratchet brake
#335 Ex SP, Dark blue/black repaint, cab-mounted 3-chime horn, SP style number boards, blanked SP light package, frame-mounted bell, large fuel tank, brake wheel
MP15AC LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Lift rings
Windshield wipers
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Operating ditch lights (if equipped)
Operating ground lights
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and -printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
HO Ford C Box Van - White
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Rubber tires
HO Trenton Works 6348 CN Boxcar - Canadian National (As Delivered) #598045
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
Model Features:
- Scaled from field measurements & diagrams of a GO F59PH
- End metal handrails with plastic stanchions
- Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
- All-metal etched grilles
- Full cab interior
- Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
- Operating headlights, rear light, and ditch lights
- GO units feature functioning tri-color class lights (white, green and red)
- American units feature functioning red marker lights
- Accurate sounds recorded from a GM 12-710G3A
- DCC/Sound units come equipped with an ESU LokSound decoder
HO 40ft ACF Welded Boxcar w/8ft Youngstown Door - Wabash #90293
Create authentic freights for your diesel-era layout with the Walthers Mainline 40ft American Car and Foundry Welded Boxcar with 8ft Door! Introduced in the late 1950s, the wider door opening was popular with shippers and receivers, allowing fast and easy access for forklifts.
Serving into the 1980s, these layout-ready models feature:
-Limited edition - one time run of these road numbers!
-Prototypes in general freight service from late 1950s to 1980s and beyond
-Detailed 10-panel body
-8ft Youngstown doors
-Late Stanray 4/4 improved Dreadnaught ends
-Stanray diagonal panel roof
-Apex see-through steel running boards
-Correct 33in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
NATO Brown Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO 4650 Centerflow Hopper BNSF
The Atlas HO Scale ACF(R) 4650 3-Bay Centerflow Covered Hopper is based on cars built by American Car & Foundry (ACF) in the 1960s, with another production run in the 1970s, these large capacity covered hoppers are used to carry grain, salt, dried kaolin clay, sugar and other bulk materials that have to be protected from the weather.
These HO models include etched-metal, see-through roofwalks, detailed brake gear, authentic 100-ton roller bearing trucks with blackened metal wheels and body-mounted Accumate(R) couplers with screw-attached coupler pockets. Undecorated models come with optional parts for three different types of loading hatches and two styles of discharge outlets. ACF(R) 4650 3-Bay Centerflow Covered Hoppers come prepainted and lettered in a variety of railroad-owned schemes with details appropriate for the early (pre-1971) or late (post-1971) production.
1:87 CAT Railroad Wheeled Excavator, Safety Yellow
Details:
1:87, Wheeled Excavator
Dimensions:
4¼ x 1⅝ x 1⅞ in
107 x 42 x 49 mm
HO ACF 50Ft 6In Boxcar - Railbox (Large Logo) #32745
FEATURES:
Prototypical non-terminating corrugated ends
Diagonal paneled roof
Single 10-foot YSD design sliding door (non-operating)
Detailed cross-member attachment rivets on the side sills
Weighted, detailed underframes
True scale dimensions with acccurate details
Equipped with AccuMate knuckle couplers
HO 17,360 Gallon Chlorine Tank Car ACFX
FEATURES:
-Brake rigging molded separately
- Scale handrails
- Metal safety bars, tank fittings and safety placards
- AccuMate couplers
- Screw-attached 100-ton roller-bearing trucks for added reliability
- Accurate painting and lettering
- Brake wheel chain
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended.
HO SD40T-2 - DCC & Sound - D&RGW (Rio Grande) #5413
ETA: May 2023
Detailed Information
DRGW FEATURES:
88inch nose with brake wheel
Large Sinclair antenna
Relocated P3 horn
Tall front ditch lights
Stratolight Beacon
Small EMD plow
Extended range dynamic brakes
The 1990s was an interesting time for some railroads. An example of this would be SP-era Rio Grande SD40T-2s. SP has always been known for having a plethora of lights on their diesels. During this period, Stratolight beacons and front ditch lights were added to many DRGW locomotives. With the combination of the factory installed nose Mars lights, these were affectionately nicknamed as -xmas tree- lights by some railfans.
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Photo-etched windshield wipers
Separately applied air tanks
LED Lighting
HTC truck sideframes
Welded ECAFB
All-wheel electrical pickup
See-through dynamic brake fans
Separately applied wire grab irons
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox specific for the tunnel motor
Speed recorder attached to appropriate axle per prototype
McHenry operating scale knuckle couplers
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Fully assembled and ready-to-run
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO SD70M - DCC Ready - Union Pacific (We are One) #1979
UP NOTES:
Omaha, Neb., June 17, 2021: Union Pacific today announced a We Are One- summer tour that features a new commemorative locomotive dedicated to diversity and togetherness. The brightly colored locomotive will start its 2021 journey in Houston, Texas, on Juneteenth, the holiday that celebrates freedom and marks the end of slavery in the U.S.
UP No. 1979 is only Union Pacifics 18th commemorative locomotive. It honors the companys nine Employee Resource Groups (ERGs) and the work they do supporting diversity, inclusion and equality. The unit commemorates the year Union Pacifics first ERG - the Black Employee Network - was established in 1979.
HOBBIES FOR GOOD:
The Athearn Team is pleased to announce that with each purchase of the Genesis Union Pacific We Are ONE unit, we will be making a donation to Hobbies For Good; a charitable organization that supports charities and causes throughout the USA.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch
Recommended radius: 22inch
LEGENDARY LIVERIES:
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
HO AutoScenes - Suds & Shine
The youngsters are not missing a spot while washing and shining this coupe for a spin down the street.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
Athearn HO - 40ft Ribbed 3-bay Ballast Hopper - Union Pacific - #2 - 4pack
901462, 901477, 901505, 901508
Removable load
Separately applied wire grab irons and brake wheel
Solid nickel silver wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO Fruit/Food Crates - Large, Brown (4pk)
A variety of food product crates with colorful labels, including: Irish Beauty, Jims Sweet Potatoes, Washington Apples, Jo Jo Melons, Greenspot, American Maid Pears, Red Crown and Big Chief Tomatoes.
HO Enterprise 2-Bay Covered Hopper - MSGX (Flo-Sweet) #118
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
Multi-Zone BDL168 Breakout Board
The Accu-Lites Multi-Zone BDL168 Breakout Board is a multiple-input breakout board for the BDL168 block detector. It eliminates soldering connections to the card edge or card edge adapter of this product. This design has four separate inputs, each tied to a specific detection zone. Each zone has four individual detection sections.
123mm (4 7/8 inches) Uncoupling track [2 pcs] - S123U
N Scale Scenic Accent Figures - Farm Horses (6/pkg)
Revolving Tool Holder - With 2 Collets
The Zona Revolving Tool Holder with 2 Collets features a ball-shaped pin vise head fits the hand, while thumb and index finger twist the chuck. This revolving tool holder is ideal for drilling larger holes in soft stock. Includes two collets with capacity of .015inch-p .050inch & .062inch-p .113inch ( .381p 1.27 mm & 1.574 p 2.87 mm) diameter. For drills, taps and reamers. 3-7/8inch overall length.
Capacity Range 1/64inch - 3/32inch
N Scale 60ft Coach Car - Toronto, Hamilton, & Buffalo #72
FEATURES:
- Based upon C&NW and CNJ prototypes
- Full scale dimensions and details
- All cars include separately applied window glazing, diaphragms and roof vents
- Observation car includes separately applied end railing details and a drumhead
- Detailed interiors (excluding baggage car)
- AccuMate operating knuckle couplers
HO GMD SD40-2 - DCC Ready - Canadian Pacific: Golden Beaver #5778
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
White River Productions - Model Railroad News, April 2024 - Magazine
Product News
Locomotives & Rolling Stock
Vehicles & Loads
Structures, Scenery & more
Books & more
G-Scale Review
Large-Scale Rescue Norfolk Southern First Responders from LGB
HO-Scale Reviews
Reading Class NMj Caboose from Rapido Trains
Orange Heritage GEVO ET44AC from InterMountain Railway Co.
Later Years Look Canadian National 1990s M-420 from Rapido Trains
A Sleek, Grand Geep GP30 from Broadway Limited Imports
Secondhand Switcher Wisconsin Central SW1500 from Athearn
N-Scale Review
Chihuahua Pacifics Big Dog Train Master from Atlas
Multi-Scale Review
Keep Things Rolling Smoothly with Labelle Products
Book Review
An Updated Census White River Productions Amtrak By the Numbers: 2
Columns & Departments:
Editorial & Letters
Prototype Profile SD40T-2 Tunnel Motor
From The Archive HO's First C-415
Timetable
Dealer Directory
Advertising Index
Tin Flat Sheet - 0.008inch x 4inch x 10inch
1 piece
Length: 10inch
Width: 4inch
Thickness:0.008inch
N Scale PS-2 2893 3-Bay Covered Hopper - Chessie C&O #2063
MODEL FEATURES:
Separately applied round roof hatches, brake wheel, and walkway
Separately applied outlets and detailed braces
Body-mounted McHenry operating scale knuckle couplers
Machined metal wheels with RP25 contours operate on all popular types of track
Minimum radius: 11inch
Prime 8911 Stratolite Beacon Set (6)
DA-SR - Solder-In, 4 EFX Outputs for Kato Drive & Athearn Genesis
These decoders are built to eliminate annoying motor hum and buzz at slow speeds.
Model Features:
- Scaled from field measurements & diagrams of a GO F59PH
- End metal handrails with plastic stanchions
- Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
- All-metal etched grilles
- Full cab interior
- Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
- Operating headlights, rear light, and ditch lights
- GO units feature functioning tri-color class lights (white, green and red)
- American units feature functioning red marker lights
- Accurate sounds recorded from a GM 12-710G3A
- DCC/Sound units come equipped with an ESU LokSound decoder
HO Conrail (CR) G41A Repaint 1976 w/ Hoods PRR Shops G41A Coil Car
CR G41A Repaint 1976 w/Hoods illustrates an early CR repaint. Check out the thinner style CR logos, PC/CR style data stencils, and era appropriate ACI and PC/CR style double COTS. The early CR cars maintained their hoods for protection of the coil shipments. If you want to model the car later in their service lives, do not panic: The hoods are removeable. The interior troughs have all of that loading and identification data, too. The ends feature the original shorter style coupler lift bar brackets and Morton style crossover platforms. The 125-Ton trucks feature rotating Timken caps, 38in wheels and accurate brake beams with truck mounted brake details.
Also, these cars look great loaded with our all-new coil loads sold separately!
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
HO RTR SD40-2 - DCC & T2 Sound - EMD Lease (EMDX) #6313
EMD FEATURES:
- Ex MILW
- Short fuel tank
- Leslie 3-chime horn
- Early radiator grilles
- 2 different plows (in poly bag)
- Fire cracker antenna
- Bell mounted behind the cab on the conductors side
Not only was EMD known for building locomotives, they also had a lease fleet of used ones. Power-short railroads could lease power on a short-term or long-term basis. Since the contracts would leave EMD to take care of maintenance, railroads could focus on other things. These brightly painted locos could be found on just about any railroad.
SD40-2 LOCOMOTIVE FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Coupler cut levers
- Flexible rubber MU hoses for durability
- Flexible rubber trainline hose
- See-through cab windows
- Fine-scale Celcon handrails for scale appearance
- Photo-etch stainless steel windshield wipers
- Wire grab irons
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Separately applied air tanks
- DCC-ready Non-sound version features 21-pin NEM DCC plug
- See-through dynamic brake and radiator fans
- Exhaust stack
- Frame mounted bell (unless noted)
- Detailed 4000 gallon fuel tank (unless different capacity is noted)
- McHenry scale knuckle couplers - Kadee compatible
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- Bi-directional LED lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
- Warranty service available
- Minimum radius: 18 inches
- Recommended radius: 22 inches
SOUND-EQUIPPED MODELS ALSO FEATURE
- Dual cube speakers
- Onboard DCC/Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
HO Railroad Crossbuck Warning Sign - Modern US Style Railroad Crossing Lettering (20pk)
Exclusive London Transit Commission (Orange/Brown)#132 4 - Oxford East
Detail Variations:
Early-style engine door
4-window exit door
all other parts in polybag
Standee Windows
Deluxe New Look Bus models also feature:
Interior lighting
Working headlights and tail lights
Illuminated front destination sign
Painted seatback handrails
Two-tone seats (where appropriate)
A 9-12 volt DC power supply (not included) is required to power the lighting features.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AABX #206023
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO GE ES44AC - DCC Ready - Canadian Pacific St. John Express #8781
ETA: June 2023
Detailed Information
CP FEATURES:
No engine compartment side grab irons
Raised radiator grills
Raised heat exchanger
Canadian Pacific placed eight orders for ES44AC locomotives spanning a decade of production. Early production units featured a distinct cab and nose profile as well as radiator, intake, and hood door variations. These features changed in later productions. The CP units in this offering represents features from the mid- production. While the cab, nose, and radiator intakes are the same as early units, the long hood doors and other features have evolved into what is found on late production units. Athearn has created new tooling to accurately produce these particular units.
ROAD NUMBER SPECIFIC FEATURES:
#8781
Special commorative paint scheme
PTC antennas
raised radiator screen
ES44 SERIES LOCOMOTIVE FEATURES:
Illuminated ditch lights
Tinted cab windows
Large antenna dome
GPS dome
Hand brake panel grille
Nathan K5HL horn
5000-gallon fuel tank
Low or high front headlight per prototype
See through dynamic brake intakes
Low or high front headlight per prototype
See through dynamic brake intakes
Short auxiliary cab rear left-side doors
Right side forward electrical cabinet with X-Panel
Engine compartment side grab irons (Non-CP Units only)
No engine compartment side grab irons (CP Units only)
Flush radiator compartment doors
Flush heat exchanger housing and top radiator grilles (Non-CP Units only)
Raised heat exchanger housing and top radiator grilles (CP Units only)
Dynamic brake exhaust vents spaced per prototype
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
HO Scale 89ft Channel Side Flatcar - Trailer-Train #150989
(yellow, black; 40ft Trailer Service)
Built especially for the bigger trailers entering service in the 1960s, this Walthers Mainline model of the 89ft channel side flatcar is a must for period intermodal modeling in HO scale. Based on the F89F flatcars owned by Trailer Train and many railroads, over the years these cars carried 28, 40, 45, 48, and 53ft trailers.
FEATURES INCLUDE:
- One time run of these road-numbers, limited quantity available!
- Heavy die-cast metal underframe for great performance empty or loaded
- Used in piggyback and other service 1963 to the present
- Prototypical C-shaped steel channel side sills
- Detailed brake gear
- Swinging coupler pocket for 18 inch radius curves
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Kenworth T680 Sleeper-Cab Tractor - 53ft Dry Van Trailer - Interstate Distribution
HO SD90MAC-H Phase I - DCC & Sound - Union Pacific #8507
Detailed Information
UP FEATURES:
#8503 & #8500 represent the first renumbering, originally delivered as #8203 and #8160 respectively.
#8509, #8512, and #8520 are modeled with the starter capacitor removed and the EOT mounted further forward on the fuel tank.
Union Pacific became the only buyer of the SD90MAC-H, known to them as SD90AC, when Canadian Pacific transferred their order to the Phase 2 variant. The first 7 were considered pre-production units and wore 2-3 numbers during their lifetime. The 8500 series we are offering represents the second and third order of SD90MAC-Hs that were delivered between 1997-1999 and before their final renumbering to the 8900 series.
SD90MAC-H SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and ?printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Big Sky Blue) #5177
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
HO SD70 - DCC & Sound - NS/ex CR Patch #2580
Detailed Information
NS EX CR FEATURES:
Same details as Conrail units below
Aquired by NS after 1998-1999 split of Conrail. Lasted several years before recieving full NS paint
CR FEATURES:
Nathan K5LAR24 horn
CR-specific antennas and conduits on cab and long hood
Air Conditioner
Small front plow
Dual fuel sight glasses
Late fuel tank
Spare knuckle brackets on rear pilot
Spare knuckle basket on walkway
Cab vent
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO USRA Single-Sheathed Boxcar: D&H
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Procor 3000CuFt Aluminum Hopper w/Handrails - UNPX/ Procor Wordmark #127230
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO USRA Single-Sheathed Boxcar: C&NW
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO 1958 Cu Ft 2 Bay Covered Hopper - Closed sides
Chicago and North Western #69321
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
HO PS-2-4427 High Side Covered Hopper - Milwaukee Delivery 3-1967 #97890
Product: Pullman-Standard PS-2CD 4427 ?High Side? Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36″ Wheels
? Milwaukee Road MILW ?Delivery 3-1967? wears the classic yellow and black graphics as applied to this 300-car order from Pullman-Standard in 1967. Tangent?s previous run from 2018 featured Milwaukee?s 1968 order of cars with gravity-pneumatic outlet gates. We have carefully replicated the lettering on every panel, bay and center sill from bold MILWAUKEE ROAD to the tiniest PS lot 9174 stencil number. All of the lettering is present and accurate. These cars feature Miner gravity gates and a PS ribbed-style roof hatch. The model also features 100-ton Barber S-2 trucks with rotating Timken caps. Each SKU number varies with CAPY, liner stencil and related Pullan date information. We hear you Milwaukee Road modelers, and your continued requests for more MILW Tangent covered hoppers in our correct shade of Federal Yellow!
HO Scale G2 SD90MAC Diesel - DCC & Sound - Norfolk Southern #7290
Detailed Information
NS FEATURES:
Primed for Grime
Patches match prototype deletion of UP reporting marks
Different patch shapes, paint color, & slogans per road number
Former UP units; major spotting details remain the same
EOTD above left rear of fuel tank
This group consisted of 110 second-hand units in total, 100 coming from UP and 10 from CEFX. Purchased with rebuilding into SD70ACus in mind, but were used in service as-is for a time before being rebuilt.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO FM H16-44, Standard DC, Canadian National: Wet Noodle Scheme No.2205
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
60ft Pullman-Standard Flatcar - Ready to Run -- TTX OTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 50ft Waffle HC Plug Door Boxcar - IC #581127
MODEL FEATURES:
- Separate brake wheel
- Body-mounted McHenry operating scale knuckle couplers
- Machined wheels with RP25 contours
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
Ballast Bag - Coarse Brown (21.6 in3)
Realistically model railroad track, crushed rock and stones.
Easy to use and colorfast.
HO 40Ft PS-1 Boxcar - Norfolk & Western (Black Repaint) #44431
Date: NK 9-73
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
Alco RS-11, 2nd Run - Diesel Locomotive - DCC Ready - Central Vermont - Green w/ Noodle #3606
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
N Scale 2022 Micro-Mouse Christmas Boxcar
Micro-Mouse and family partake in a joyous Christmas tradition of displaying their all-time favorite train-themed ugly sweaters for the 2022 Christmas photo. Merry Christmas!
HO GE Dash 9-44CW - DC/DCC Ready - Quebec, North Shore & Labrador QNSL #413
QNSL FEATURES:
Front and rear marker lights (fully functional in DCC mode)
Low mounted number boards
K3 horn
Front ditch lights
Standard brass bell
Purchased in 1998 to help replace their aging fleet of older EMDs, Quebec, North Shore and Labrador turned to GE for 11 new high horsepower Dash 9 C-44CW locomotives. Painted in a bright orange and yellow scheme, these units were used in heavy iron ore service along the north shore of Quebec, Canada.
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
Flat Brushable Acrylic - Seasoned Brown Wood - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
HO MLW M630 - Standard DC- Executive Line- Minnesota Commercial #73
(Ex-Canadian Pacific #4573)
Ready To Run and Fully Detailed!
Features:
- MU Hoses
- air hoses
- windshield wipers
- operating headlight
- window glass
- can motor
- flywheels
- blackened nickel silver wheels with RP25 flanges
- knuckle couplers
- handrails installed
DCC and Sound version features LokSound Select decoder.
Analog (DC) version has 21 pin socket for DCC module. (recommended decoder - ESU #59629)
Sound Retro Fit kit C628 loco: #691-1225
1/4In Acrylic Round Rod (10pcs)
This clear solid rod can be used for bracing, cabling, piping, or wherever round stock is appropriate. Also quite useful in crafts and educational projects. Precision Extruded in Clear Acrylic Plastic.
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
CLEAR
HEIGHT IN INCHES
1/4In
HEIGHT IN MM
6.4mm
LENGTH IN INCHES
8-3/4In
LENGTH IN MM
225mm
HO NSC Ballast Hopper - Amtrak #11605
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
Decoder Buddy 8 Output Original 21-HW - 21MTC Adapter Board - NEM660 21MTC Integral Connector
Dimensions:
Width: O.67in
Length: 2.20in
Height: 0.35in
(17 mm x 56 mm x 9 mm)
Height may vary slightly
depending on decoder.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX #16236
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Switch Stands - Style #1 (2pk)
Product Information:
Details West HO Scale Switch Stands are based on those used on turnouts throughout North America. Available in several designs to match a variety of prototypes, each is a detailed, non-operating cast metal or plastic part. This Switch Stand is part of the complete line of Details West HO Scale track details.
Code 70 #6 Turnout - Medium Radius - Left Hand, Unifrog
Product Information
Peco HO Scale Code 70 Unifrog Medium-Radius #6 Turnout is electrically -live,- except for the frog tip and wing rails, and operates as an Insulfrog turnout without modification or additional wiring. To power the frog and wing rails, use the supplied connecting wires. Complete instructions on wiring and use are included in the packaging. In HO Scale, Code 70 rail represents smaller 100# per yard rail, common on mainlines in the steam era and on branches and some light rail lines in the diesel era. Check out the entire line of Peco Code 70 track.
60ft Pullman-Standard Flatcar - Ready to Run -- Southern Railway
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Union X-3 Tankcar - Procor Limited #32830
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO PC&F 5241 CUFT - Boxcar - Pan Am - (B&M) - Single Car #3217
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO FMC 5077 SSD Boxcar - Vermont Railway #3527
MASTER MODEL FEATURES:
- Single or Double Sliding Door where appropriate
- Multiple body styles
- Metal knuckle couplers
- Plate B Box Car
- X-Panel Roof
HO 60ft PS Auto Box - Southern Pacific/SP #621125
MODEL FEATURES:
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Fully detailed full cushion underframe
- Full underframe detail: air brake reservoir, control valve,
- Separately applied door closure rods, side ladders, metal grab irons and brake cylinder with plumbing and brake rod details
- etched metal end platforms
- 100-Ton roller bearing trucks with operating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Machined metal wheels
- Weighted for trouble free operation
- Multiple road numbers
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
During the 1960s, Ford Motor Company, Pullman Standard and Santa Fe pooled their resources to develop a standard boxcar to meet the transportation needs of automobile manufacturers in the United States. Delivered in 1965, the Pullman Standard auto parts boxcar is the most prolific example of this type of freight car. It ultimately changed the face of automobile manufacturing and rail transportation.
PRIMED FOR GRIME MODELS FEATURE:
- Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Some Prime for Grime models feature paint scheme variations.
HO 40ft ACF Modernized Welded Boxcar - Illinois Central #4000
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Sparkling Silver Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
Evergreen Scale Models 105 Opaque White Polystyrene Strips 14in .010x.100 (10pcs pkg)
12 inch Long Round Music Wire - 0.015inch Diameter pkg(4)
Round Music Wire - package of 4
Outside Diameter: 0.015inch
All Scale DC Converter - For Electrical Accessories
Connects to the AC 16/17V accessory output on your power pack. Only one converter is needed to connect as many turnout control switches and crossing gates as your layout requires.
Spray Can - UN Grey/Sasebo Arsenal (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #289
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
HO GE U25B Low Hood - DCC & Sound - Penn Central #2668
The HO scale U25B Locomotive features:
Phase I, II & III units represented in 1st run. (Phase IV & other units will come with future runs)
Single-window style for low nose units. (Double-window in future runs)
Both low- & high-short hood versions
Early high- & later low-style side doors.
Road specific details for each model
Working step lights on low-short hood models
Different roadname-specific exhaust stacks
Roadname-specific battery box doors on engineers side
Roadname-specific air cleaner boxes on rear
Working inspection lights on all units
Lighted control stand inside cab
Different types of fuel & air tanks, as appropriate
HO High Cube DD Plug Box - BCOL #100449
MODEL FEATURES:
Separately applied brake wheel
Underbody with brake system details
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
260 Wood Weathering Set - Acrylic Paint Set (261, 262, 263)
35ml X 3 jars per set
This set gives the modeler everything they need to make weathering effects and work any type of wood, contains two filters specific for wood and one wash made specifically for weathering wooden items. An ideal complement for acrylic sets for a realistic finish.
This set contains:
_ AK-261 Light Filter for Wood
_ AK-262 Filter for Brown Wood
_ AK-263 Wood Wash
12inch Long Brass Angle - 0.014inch Thick x 1/8 inch Leg Length
Brass Angle (1 pc)
Leg Length: 1/8 inch
HO GE P40DC - DCC & Sound - Amtrak/Phase III #839
Detailed Information
AMTK FEATURES:
Newly-tooled body with cab mounted strobe lights and emergency light (Operational in DCC)
Single Sinclair Antenna
5-chime forward facing horn
Rear hostler window
Front and rear red marker lights
Amtrak approved artwork
In 1993, Amtrak placed an order with GE for 44 -Genesis AMD 103- P40DC passenger locomotives. They were designed to be short enough to fit in low-profile tunnels and had extra bracing installed in the nose for collisions. The sleek and modern design made the locomotive more aerodynamic than other models which made them more fuel efficient. They were all equipped with HEP (Head End Power) for providing power to the passenger cars. By 2004, Amtrak started to retrofit their locomotives with bolt-on noses. In the event of a grade crossing accident, they could be easily replaced and put back into service.
ROAD NUMBER SPECIFIC FEATURES:
#813
As-build configuration
Ph III faded stripe scheme
front strobe lights (Function in DCC mode)
Rear hostler window
#822
As-build configuration
Ph III faded stripe scheme
front strobe lights (Function in DCC mode)
Rear hostler window#839
#839
As-build configuration
Ph III faded stripe scheme
front strobe lights (Function in DCC mode)
Rear hostler window
P40DC/P42DC SERIES LOCOMOTIVE FEATURES:
Officially licensed product of Amtrak (Amtrak-painted units)
Officially licensed product of Via Rail Canada (Via painted units)
Officially licensed product of Operation Lifesaver (Operation Lifesaver-painted unit)
4 different nose variations: Amtrak as-built with strobes, Amtrak as-built without strobes, Amtrak rebuilt, and Via
Operating marker lights front and rear on Tsunami2 equipped models
Rear marker lights installed, but not connected on DCC Ready models
Newly-tooled lit number boards
Flashing strobe light and -Big-Hole- emergency light on equipped Amtrak units (Operational on DCC only)
Flashing ditch lights on non-strobe equipped Amtrak units synced with horn blow (Operational on DCC only)
Flexible rubber MU hoses
Flexible rubber trainline hose
Separately applied wire handrails
Exhaust stack
Photo etched metal radiator fan grille
Highly-detailed underframe including air tanks with air lines, air filter, and air dryer with two different types of rock shields
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting including operating ditch lights and red marker lights
Completely-redesigned die-cast frame for superior tractive effort
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Equipped with dual 28mm round speakers
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 50ft NACC Boxcar - Hamms #31241
MODEL FEATURES:
- Three road numbers
- Applied metal grab irons and etched end platforms
- Pullman Standard or Superior plug doors
- Pullman Standard or Stanray (Superior) roof (to match prototype)
- Ready-To-Roll 70 ton trucks
- Machined 33 inch metal wheels with RP25 contours
- Body mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Minimum radius: 18 inches
Spray Tac - 8 fl oz (236 mL)
Apply plant hues or flowers
Clear matte finish
Fine mist
Water soluble
Adam s Ave. Part Three 5 x 5Inch 5.2 x 5.2cm
Add character to urban areas along your railroad with this series of structure kits. The models feature detailed walls made of cast Hydrocal, plastic windows and doors, along with full-color signs and awnings. Each can be assembled with basic hobby tools, and easy to understand step-by-step instructions walk you through construction, from gluing the kit together to final painting and weathering.
This typical skid row/downtown hotel includes the -Palace Hotel & Card Room-, -Reds Bar- and the -Downtown Apartments.-
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
Spray Can - Pearl White (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO - Air Horns (Unpainted Brass Casting) - Nathan P3R4
HO Hyundai 48ft Exterior Post - NACS (2pk)
Road #200400, #283130
PROTOTYPE TYPE:
48ft Exterior Post containers were introduced in 1986 and were a common site on nearly all double stack container trains of the later 80s, 90s, and 2000s. These containers were used for domestic freight service and were purchased by numerous railroads and freight operators in large numbers. These containers were a unique design in which the front and side container panels were supported by aluminum channel posts mounted outside of the container box to provide additional capacity space for larger pallet stacks within the container interior. The posts are a simple spotting feature for these styles of containers. Hyundai was one of a handful of manufacturers of exterior post containers, and while nearly-identical in design to one of their competitors, the additional drainage channel on the top of the container at the head end, and full-height end corner posts differentiate this container from its competitors design. Some of these containers served secondary lives for more than one operator, leading to some interesting graphic combinations over their lifespans. Changes to over-the-road length allowances for 53ft containers and trailers brought about the eventual demise of the 48ft container and a majority of them were withdrawn from service during the mid-2000s and beyond, though limited numbers still remain in service today.
FEATURES:
Hyundai Roof Configuration Version:
A unique feature of the Hyundai design was the additional water drainage channel near the front end of the container and the forward vertical framing members that extended the full height of the container. We have modeled the detail that differentiates this container from those of other manufacturers of 48ft exterior post containers.
Sharp And Accurate Paint And Lettering:
Classonemodelworks.com provides accurate paint and lettering taken from photographs of the prototype, and numbering that matches the class numbers for each operator or railroad. Our containers come with the exterior posts already painted to match the aluminum color of the prototype containers and galvanized coloring for the upper and lower structural channels.
Accurately Dimensioned:
These containers have been accurately reproduced from hand-measured field dimensions of the actual containers, right down to every visible detail. Classonemodelorks.com stands for accuracy and we strive to provide that with every model we produce.
Accurate scale Door latching Details:
Classonemodelworks.com believes in providing models that accurately depict the prototype equipment. Keeping that as our core, we are proud to provide highly-detailed cast door locking bars, latching mechanisms, door bumpers and angled bar lifter.
Central Gas & Supply
2 Detailed Propane Tanks
Modern Metal Office
Pumphouse & Piping
Smaller Tanks & Bottles
Colorful Decals
Great Add-on for Modern Grain Facility & Industries
HO 4750 Cubic Foot Rib-Sided 3-Bay Covered Hopper - Klemme Coop #4247
These ready-to-run cars feature injection-molded bodies with separately applied metal grab irons and etched metal roofwalks! Cars include trucks and brass wheelsets, weights and Kadee #5 magnetic knuckle couplers.
GMD SD40-2f - DCC and Sound - CP Rail (Round Porthole, White Stripe) #9005
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
HO Farmers Grain and Stock CO
This small HO scale elevator will fit nicely on any size layout.
It includes the Scale, Office, and Unloading Shed.
Features include: peel & stick windows, doors, and trim; drive in ramps with laser-scribed decking; tabbed and slotted wall construction; positionable doors; access ladder; white metal grain spout; simulated standing seam metal roofing; and a color sign sheet.
The assembled kit measures
6in long x 5.5in wide x 7in high.
HO 13,600 Gallon Acid Tank Car - Union Tank Car/Black (UTLX) #13861
ETA: July 2023
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
HO GP40-2 Diesel - DCC Ready - Seaboard System #1640
SBD FEATURES:
- Ex-SCL and Ex-L&N
- Nose headlight
- 5-Chime horn
- Fire cracker antenna
- No plow
- All-new artwork provided by noted SBD railroad experts
ROAD NUMBER SPECIFIC FEATURES:
#1640
- Early phase
- Ex-SCL
- Chicken wire grilles
- 3200 Gal fuel tank.
#6608
- Mid/Late Phase
- Ex-L&N
- Q-fans
- corrugated grilles
- 3800 Gal fuel tank
- exhaust silencer
- front anti-climber
#6615
- Mid/Late Phase
- Ex-L&N
- Q-fans
- corrugated grilles
- 3800 Gal fuel tank
- exhaust silencer
- front anti-climber
GP40-2 LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18 inches
HO 5820 Covered Hopper - DCLX (Dow Chemical) #7204
Era: 1988+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
All-New bluetooth controlled Tsunami2 DCC Sound Decoder
Blunami will change the way you enjoy the model railroading hobby
The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.
Currently the app is only available for Apple iOS devices (versions 8 or newer). The app offers an easy graphic interface to adjust all Blunami settings and features with drop-downs and slider bars. All programming can be done through the app, as well as with your DCC system. You no longer need to understand CVs or own a command station to run your trains!
1956/72 IHC-190 Tandem Reefer Van - Unpainted and Resin Cast Kit
HO Nathan K3HR3 Air Horn - Unpainted Brass Casting
HO 45Ft Trailmobile Dry-Van Trailer w/ Side Door - CN Piggyback #204910
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
LOCOMOTIVE FEATURES:
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
HO 50ft Evans DD Plug Boxcar - USLX Tropicana #13081
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
Kit - Black pkg(6)
HO GE 44 Tonner Phase III - DC/DCC/Sound - Southern (Tuxedo Scheme) #1953
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
N Scale AutoFlood III RD Coal Hopper - CEFX #600580
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
RTR 57Ft trinity 3-unit Spine Car - TTRX/Faded Logo #360823
Expected time of arrival : April 2021
Primed for Grime
MODEL FEATURES:
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Precision die-cast metal spine structure
Etched metal walkways
Separately applied brake piping
Highly detailed customer applied trailer hitches
53Ft trailer and container are perfect loads for the 57Ft spine car
Fine ladder detail
Weighted for optimal performance
33Inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers installed
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Machined metal wheels
Minimum radius: 20Inch
PROTOTYPE AND BACKGROUND INFO:
Intermodal transportation requires specialized rail equipment which is, on occasion, too specialized. To allow more flexibility in loading containers and trailers at terminals all-purpose spine cars were developed. These cars can be configured to allow loading of trailers of varying lengths, from 28Ft pups to 53Ft high capacity units. With the trailer hitches collapsed containers can also be loaded. 40Ft, 45Ft 48Ft and 53Ft containers call all be accommodated on these cars as well as 20Ft models provided they are mounted to a chassis.
The prototype for our model is based on a Trinity-built car owned by the TTX Company. These 70-ton cars (TTX class RAF30A) numbered TTRX 360817-361116 first appeared on the rails in the late 1990s. The Athearn model is faithful to the prototype allowing modelers to load a variety of trailers and containers.
Specifications
PROTOTYPE MANUFACTURER: Trinity
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990s+
HO Platforms and Stairways - Photo-Etched Brass Kit
Product Information
Upgrade your modern HO Scale industries with the Walthers Cornerstone Platforms and Stairways set of photo-etched brass walkways and work platforms. Designed for easy construction, simply cut, fold and glue. Includes illustrated instructions and features near-scale railings, platforms and open stairways to upgrade your industrial buildings or replace oversize components. The Platforms and Stairways kit can be used on many Cornerstone HO Scale industrial buildings.
Modernize any industry in minutes - great for kitbashing and customizing!
Near-scale railings and platforms
Fine handrails and trusses
Open stairways
Raised tread detail
Double Lamp Post Street Lights - 3 sets
Use to light street corners, sidewalks, parks and more. 20mA/set RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 0.484 in w x 2.76 in h (12.3 mm w x 70.1 mm h)
HO Outhouse- Laser Cut Wood Kit
2 pieces
HO GP9RM Mother & Slug - DCC & Sound - Canadian National (Early) #7236, 237
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
The GP9RM Slug features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks with outside brake shoes or Flexicoil trucks
Traction motor details on gearbox
Detailed walkway tread
Metal side handrails
Footboard pilots or curved plate pilots on appropriate road numbers
Working head lights
Both models are available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO GE C30-7 - DCC & Sound - ATSF Santa Fe (Early Scheme) #8051
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
Kadee Quality Products, #1686 Roundhead Screws 12 Pcs
1-72 by 1/4 inch
stainless steel
Exhaust Stack - EMD Non-Turbo Charged GP/SD TYPE - pkg(2)
HO PC&F 5241 CUFT - Boxcar - Olympic Railroad (OLYR) - Single Car #74814
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
BSI- 102- Super Thin 1-3 Sec Glue 1oz
HO Red Wing Milling Co. - Kit
Product Information
Flour mills have changed dramatically since the water-powered mills of the 1800s. The Walthers Cornerstone Red Wing Milling Co. captures the look and feel of contemporary mills in a size that fits most layouts. 1950s and later mills produce enormous quantities of flour and other milled grains. They once received grain in boxcars and have since moved to covered hoppers. Outbound flour and meal moves out in Airslide(R) and similar covered hoppers as well as in bulk hopper trucks. The modern concrete Red Wing Milling Co. features truck and rail loading facilities, blowers, vents, separate doors and windows, and full-color decal signs.
As shown the finished kit measures: 8 x 11 x 10-3/8inch (20 x 27.5 x 26.5cm.)
Red Wing Milling Co. is just one of a wide variety of Cornerstone industrial buildings.
Contemporary trackside industry
Prototypes receive grain in covered hoppers or boxcars, ship flour in Airslide hoppers, boxcars and by truck
Exterior dust collectors, fire escape ladders and other details
Railcar loading canopy
Truck loading doors
Easy-to-build plastic kit
Realistic decal signs
HO ACF 4600 3-Bay Centerflow Hopper - Gulf Mobile & Ohio #81025
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
SubTerrain System - 2 Inch Foam Nails (75pcs)
Use foam nails to temporarily pin track, foam, or other products to your layout.
#25 Short (1/4inch) Overset Shank 20 Series Magne-Matic(R) Couplers 2 pair
Multi-purpose insulated coupler kits for Talgo truck or body mounting om locomotives or rolling stock. Includes adapters and #5 draft gear box. 20 Series Coupler may be replaced with the appropriate 40 Series metal coupler for added strength.
HO Scale - 1966-77 GMC 9500 Low Cab Tandem Axle Long Hood Tractor - Unpainted and Resin Cast Kit
Damp Earth Satin Wash Enamel Paint - 35ml Bottle
HO 36Ft RTR 3-Dome Tank Car - ACFX #4551
Product Information
Add authentic cars to your steam- or diesel-era layout with these 36Ft 3-Dome Tank Cars from WalthersMainline! Serving a wide range of both producing and consuming industries, these cars were actually three tanks in one, ideal for handling smaller amounts, and a greater variety of product at once. Features of these cars include:
One time run of these roadnumbers, limited quantity available - order now!
Prototypes hauled petroleum, chemicals and similar liquid loads in three compartments
In service from late 1920s to 1960s
Detailed underbody with AB brakes
Fully assembled
Correct 33inch turned-metal RP-25 wheelsets
Proto MAX metal knuckle couplers
HO EMD SW9 - DC/ Silent - Union Pacific (UP As Delivered Slogan) #1838
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Union Pacific:
Features the as-delivered slogans -DEPENDABLE TRANSPORTATION- on the right hand side of the cab, and -SERVES ALL THE WEST- on the left hand side of the cab.
Delivered in 1953
Optional -beehive- style spark arrestors with short stacks in polybag
Carbody style handrails
Extra tall -safety end rails- on the cab end
Reflectolite flashing warning light
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO 50ft FMC Combo Door Boxcar - Railbox/ABOX (Late) #50078
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Weighted for optimum performance
- Minimum radius: 18 inches
- Body-mounted, McHenry operating scale knuckle couplers
- Fully assembled and ready for your layout
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Vancouver Iron Works Piggyback Flatcar - Canadian National (6 pkg) #2
Includes Road Numbers:
688102, 688105, 688109, 688123, 688127, 688163
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
HO EMD GP9 Phase II with Chopped Nose - Standard DC/DCC Ready - Canadian National #4002
Product Information
WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they are nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features:
One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present
Limited edition - one time run of these roadnumbers!
Scale width hood with correct contours
See-through steps
Same powerful drive as WalthersProto(R) locos featuring:
Five-pole skew-wound motor
14 to 1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Machined brass flywheel
Heavy die-cast metal chassis
Constant and directional LED headlights
21-pin DCC plug
Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately)
Juneco Scale Models Sack - Leaning (6/pkg)
Chicago & North Western #39615
Built: BLT 2-69 RBLT 7-84
Metal wheel sets , Kadee #5 installed
HO Scale NSC 73Ft Centerbeam Flatcar - BNSF #563003
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
Forest Blend
Models low-to-medium ground cover, such as bushes, trees and shrubs, and to make small to medium trees. Available in six colorfast colors that blend with other foliage. Use for any scale. Attach to Tree Armatures with Hob-e-Tac.Attach to layout with Scenic Glue. Purchase the Scenery Manual for additional information about how to use the Landscape System.
Particle size is approximately 1/8inch - 5/16inch (3mm - 7.9mm)
Tru Color Paint 084 - Acrylic - Maersk Sealand Blue- 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).