Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Norfolk & Western
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended.
HO 18inch Through Truss Bridge Kit - Code 83 Track (Black)
Features:
Rivet detail
Simple construction - little glue required!
Kit includes 18inch Through Truss Bridge & track with bridge tie spacing
36in Metal Wheelset - Long Axle (8)
HO 16,000-Gallon Clay Slurry Tank - JMHX #71009
MODEL FEATURES:
- Separately applied fittings nozzle, manway, and small safety valve nozzle
- See-through Photo-etched metal walkways and end platforms
- Full brake plumbing and rigging including brake wheel, air reservoir cylinder, triple valve, brake linkage, trainline, brake rod, large brake
- Printed marking on the sides, ends, and top of the tank body
- Fine scale side ladders
- Placard holders
- Printed marking on the sides, ends, and top of the tank body
- Equipped with McHenry AAR upper/lower shelf couplers
- 36 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Multi-packs feature unique road numbers
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Kaolin, a fine white clay, is produced by the natural chemical weathering of aluminum silicate minerals such as feldspar. Mined in the southeast United States (primarily Georgia and Florida), kaolin is used in the manufacture of ceramics, bricks, light bulbs, cosmetics, medicines and food additives. The largest use is in the manufacturing of paper, especially in creating glossy paper. Kaolin is shipped both as a dry powder in covered hoppers and in tank cars with water as a slurry. In the slurry form the weight of water requires the tank cars be smaller capacity compared to other liquids such as ethanol and LPG. Identical tank cars are also used to haul calcium carbonate slurry, used in the making of lime and cement.
One of the more modern versions of the 16K Gallon Tank car is designed and manufactured by UTLX Manufacturing Inc (formerly Union Tank Car). The car is a 286K (referring to a 286,000 pound gross rail load limit) design with a capacity of approximately 16,000 gallons. The capacity varies slightly between UTLX and Englehard, the operators of the cars. The car is an AAR Plate C clearance car with a 111-inch I.D. tank and an overall length of 44 feet. For a complete bottom unloading the car incorporates a Funnel-Flow design. The cars are lined and kept in dedicated service to avoid cross-contamination.
HO Ranch Tract House - Kit
Alco RS-11, 2nd Run - Diesel Locomotive - DCC Ready - Duluth, Winnipeg & Pacific - Delivery #3600
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO Lightweight Coach -VIA Rail Canada #5627
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO RTR Thrall Rebuilt 40Ft Well Car - Trailer-Train (DTTX - Maroon Logo) #53045
(yellow, black; Large Maroon Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers, order now - limited quantity available
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
70-ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 4-Bay Cylindrical Grain Hopper - Scoular #1687
FEATURES:
- blackened metal wheels
- body mounted couplers
- non-magnetic axles
HO RTR ACF 4650 3-Bay Hopper - Golden West #GVSR 525035
Built: BLT 6-90
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO EMD GP40 - DCC & Sound - Canadian National (Stripes) #4016
1978+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO Siemens Venture Passenger Car - VIA Rail Canada Business #2600
The Siemens Venture is the latest generation of medium-distance passenger railcars for North America. Constructed by Siemens Mobility in California, the Venture cars currently see use on Amtrak state-supported services in the midwest and California, while VIA Rail Canada has introduced the series on corridor services in eastern Canada. The Bachmann Venture Cars have been developed in collaboration with Siemens, using original design documentation to ensure prototypical accuracy.
Features include:
Fully furnished and lighted interiors
Road-specific exterior configurations
Separately-applied details
Magnetically operated E-Z Mate Mark II couplers
Blackened machined metal wheels with RP25 contours
Optional Close-couplers included
Performs best on 18inch radius curves or greater
PS-2 2003 2-Bay Covered Hopper - Denver & Rio Grande Western #18327
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
HO RTR 53Ft Platewall RoadRailer Trailer - Norfolk Southern (Triple Crown) #463509
Norfolk Southern
Triple Crown Medium Logo
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
HO 5820 Covered Hopper - EHSX (Essex Hybrid) #123034
Era: 2005+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16019
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale 50Ft NACC Box - Dresser Magcobar #42977
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
4785 PS2-CD Covered Hopper - Early End Frame - New York Central 138-H #886953
N Scale 40ft Corrugated HC Container - ONE #2 (3pk)
MODEL FEATURES:
- Fully-assembled
- Newest horizontal rib front
- Easily stackable
- Razor-sharp printing and painting
PROTOTYPE AND BACKGROUND INFO:
Pullman-Standard dominated the covered hopper car market beginning in the 1950s, thanks to the design success of their PS-2 series of covered hoppers. Designed to carry bulk commodities, such as grain, cement, salt, potash and other mineral products, these cars roamed the rails of North America for decades, attesting to their utilitarian functionality.
HO RTR ACF 4650 3-Bay Hopper - Great Northern #171842
Date: 11-66
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16203
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 40Ft PS-1 Boxcar - Norfolk & Western (Black Repaint) #42055
Date: NK 9-73
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
Peco PL10 Switch Machine
Easy-to Install Motor for Peco Turnouts
Unit installs directly beneath the turnout and makes positive contact without linkage or other complex connections. Just cut a hole in your bench work deep enough to clear the motor and install.
The pin is 3cm long.
Simple, reliable and good value. Requires a rectangular hole 40mm x 24mm when clipped directly to the underside of a Peco Turnout. Use the PL-12/12X if above baseboard mounting is required; attaching PL-13 and 15 Switches will enable switching for automatic polarity etc.
Recommended to be used with:
PL-26 Passing Contact Switches
PL-34 Turnout Motor Wiring Harnesses
PL-27 Switch Console Units
Microscale 87-1119 HO Christmas Decals - Snowflakes and Holly
HO RTR 53Ft Platewall RoadRailer Trailer - Norfolk Southern (Triple Crown) #463515
Norfolk Southern
Triple Crown Medium Logo
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
HO Conrail (CR) G41A Repaint 1976 w/ Hoods PRR Shops G41A Coil Car
CR G41A Repaint 1976 w/Hoods illustrates an early CR repaint. Check out the thinner style CR logos, PC/CR style data stencils, and era appropriate ACI and PC/CR style double COTS. The early CR cars maintained their hoods for protection of the coil shipments. If you want to model the car later in their service lives, do not panic: The hoods are removeable. The interior troughs have all of that loading and identification data, too. The ends feature the original shorter style coupler lift bar brackets and Morton style crossover platforms. The 125-Ton trucks feature rotating Timken caps, 38in wheels and accurate brake beams with truck mounted brake details.
Also, these cars look great loaded with our all-new coil loads sold separately!
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Western Pacific #20112
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
1890 Cop and Telegrapher - 2 Unpainted Figures
2mm Static Grass - Snow (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
Output: 24V AC 1000mA
Powers up to 50 lights and connects to Just Plug Light Hub or Expansion Hub, each sold separately.
2-11/32 inch Vertical Railing (2pcs)
Use for hand rails, stair rails, roof trusses, grating and other steel structures. Precision Injection Molded in Styrene Plastic. May also be used for trellises, fencing window bars, etc.
SCALE
ALL
MATERIAL
STYRENE
COLOR
VARIOUS
HEIGHT IN INCHES
2-11/32
HEIGHT IN MM
59.5mm
WIDTH IN INCHES
1/4
WIDTH IN MM
6.4mm
THICKNESS IN INCHES
.085
THICKNESSS IN MM
2.2mm
LENGTH IN INCHES
5
LENGTH IN MM
125mm
N Scale ACF 3560 Center-Flow Covered Hopper - CSX #226814
Features:
Prototypical painting and lettering
Plastic body with die cast chasis
Removable coal load
Product Information
The Atlas Trainman ACF 3560 Center-Flow Covered Hopper is based on common steel cars used by many railroads for handling potash, fertilizers, chemicals and more. It features an injection-molded body with applied plastic details where appropriate, smooth paint, crisp lettering and AccuMate(R) knuckle couplers.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - New York Central (NYC Green) #157055
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Amtrak NPCU Cabbage - DC/DCC/Sound - Amtrak (Salutes Our Veterans) #90221
The Rapido Trains HO scale Amtrak NPCU -Cabbage- features:
Fully powered, available in silent DC or DC/DCC/Sound
DC models are DCC-ready with a 21-pin plug
Accurate enlarged marker lights, supplementary air reservoirs and K5LA horn
Operating, flashing ditch lights
Operating strobe lights and marker lights
User-controlled operating number boards
Etched-metal radiator grilles and windshield wipers
Separate handrails and grab irons installed at the factory
Rapidos proven 5-pole, skew-wound motor and silky-smooth drive system
Metal, magnetic Macdonald-Cartier Couplers mounted at the correct height
Second release paint schemes include:
Amtrak Phase III
Amtrak Phase V
Amtrak Phase V -Downeaster-
Amtrak -Salutes Our Veterans-
Evergreen Scale Models - Opaque White Polystyrene I-Beam .080In x 14In (4 pcs pkg)
HO Portec 3000 Covered Hopper - Midwest Railcar (MCEX) - #330224
Features:
- Ready to run
- Injection molded plastic
- Fine scale detail with many separately applied parts
- 2 Body and roofwalk variations to accurately match the prototype
- 2 styles of vibrator brackets
- Highly detailed end cages and brake gear
- 100 Ton Trucks
- Metal Couplers
- Etched metal roofwalks and end platforms
- Crisp painting and printing
HO SD75M - DCC & Sound - Santa Fe BNSF #231
Detailed Information
BNSF FEATURES:
Faded paint colors
Small EMD plow
Round deck mounted front ditch lights
Large Sinclair antenna
Early EMD trucks with hidden bearings
Road number specific details and artwork
Part of the original Santa Fe 1994 order, these SD75Ms are depicted as late in their life. Just before they were sold to PRLX, they soldered on looking beaten and battered, but still earning revenue for their owner. Renumbered to the 8200 class in the 2000s, they eventually returned back to their original Santa Fe numbers again, but with BNSF patches.
ROAD NUMBER SPECIFIC FEATURES:
#226
Ex-ATSF 226
small cab numbers
added rear number boards
yellow frame stripes
#231
Ex-ATSF 231
large cab numbers
yellow frame stripes
#249
Ex ATSF 249
large cab numbers
yellow frame stripes
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Plastruct 90031 ABS I Beam 5/8 (3pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
5/8
HEIGHT IN MM
15.9mm
WIDTH IN INCHES
1/4
WIDTH IN MM
6.4mm
THICKNESS IN INCHES
.080
THICKNESSS IN MM
2.0mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
TRADITIONAL ABS I BEAMS Use for horizontal or diagonal members in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or professional
#1649 Roundhead Stainless Steel Screws 0-80 x 1/2inch- 12pcs
Rock Molds Random Rocks
Highly detailed, flexible and durable rock molds can be used to cast small boulders, rock outcroppings, top rocks for fields and creeks, or make entire rock faces by combining castings produced with these molds.
Intermountain - N 4750 3 Bay Hopper - CN/ Chicago Central
Coupler Type Intermountain Magnetic Knuckle
Wheel Type Chemically Blackened Metal
Wheel Profile Small Flange (Low Profile)
HO 85ft General American G85 Flatcar - GTTX (Yellow) #300424
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
SwitchPilot 3 - Accessory Decoder - DCC/MM, 1A
SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.
MODES:
The SwitchPilot 3 is multi-protocol and can be used with workstations according to the Marklin Motorola system (e.g. 6021, Central Station or Mobile Station) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom, CVs can also be read out.
FEEDBACK:
Since the SwitchPilot 3 is RailCom-capable, all settings can be read out and changed directly in the built-in state on request. In combination with an ECoS as an ideal partner, the SwitchPilot 3 can record and display the actual turnout setting with appropriately prepared turnout drives. Finally, you have the certainty that your switch has switched correctly!
SET:
The SwitchPilot 3 can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM (Programming on Main) or can also be read out via RailCom CVs. On request, he also learns the addresses directly via a programming button. The easiest way to set is, of course, with the integrated OLED display and the three input buttons: All Settings can be checked directly on the decoder and changed on request. Programming with the help of your control panel is not required. It really can not be any easier! The ESU LokProgrammer can be used for firmware updates.
Fox Valley Models N Bi-level Auto Rack
Providence & Worcester
Features:
Die-cast underframe
Finely Molded Details
Etched Metal Panels
Formed Wire
Sharp Painting & Lettering
Multiple Road Numbers
Die-Cast Underframe
Metal Wheelsets
Micro-Trains Trucks & Couplers
Code 83 Through Plate Girder Bridge Kit, Double Track
Girder measures 8 inches Long
Track piece measures 9 inches Long
Highly detailed
Prototypical bridge track
Easy assembly
Kit - Blue pkg(6)
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Blue
Evergreen Scale Models 3047 .047in Opaque White Polystyrene Passenger Car Siding (1Sheet)
HO EMD GP40 - DCC Ready - Western Pacific (Zephyr) #3514
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
60ft Pullman-Standard Flatcar - Ready to Run -- Southern Railway
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Dog Bone for SD70MAC - 2.150 inches (6pcs)
LOCOMOTIVE FEATURES:
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
HO Trinity 3230 Covered Hopper - General American (GACX) #62758
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
HO 53ft Railgon Gondola - Railgon GONX #310660
(as-built; black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft Railgon Gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
A great addition to your HO freight car fleet, the models feature:
-Based on Railgon 310000 series cars
-Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
-Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
-100-ton roller-bearing trucks
-Correct 36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO EMD SD7 - DCC & Sound - Bessemer & Lake Erie #451
Bessemer & Lake Erie
- Unique -B&LE- style sand fill door hatches
- Long hood forward operation
- Extra large pilot step and corresponding additional stepwell step (First time done on a plastic model!)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Gone Fishing
5 pieces
Fishing People
HO PS-2-4427 High Side Covered Hopper - CPAA Delivery 1-1970 #388152
Product: Pullman-Standard PS-2CD 4427 ?High Side? Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36″ Wheels
? Canadian Pacific CPAA ?NA Delivery 1-1970? shows as-delivered gray cars leased from North American Car Corporation to Canadian Pacific. These cars feature the distinctive NAHX Roman-style data lettering that also carries over to the CPAA reporting marks and numbers. The North American Car black/white/red badge down along the sill provides a tiny bit of color to this gray lease scheme. The models come equipped with Youngstown EZ-Roll gravity gates and Apex-style end crossover platforms. With a 1970 build date, these Pullman-Standard lot cars leased to NAHX include center sill supports between the bays and open-style end running board supports. The finely printed capacity data and internal liner data varies between each car number. And yes, don?t worry, these NAHX cars have their accurate serial number stencils along the centersill of the car on each side. Black 100-ton Barber S-2 trucks with accurate (and rotating!) Timken caps finish the model.
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - St. Louis San Francisco Rack/ Trailer-Train Flatcar #913646
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - GE Rail Services Corporation/ITLX #30023
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Prototypes in service from late 1980s to the present
- Separately molded and applied hopper gates
- Correct 36 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
Phase 1b - American Versions -
New York Central - DCC Ready -
M459, • Accurate Phase 1 and Phase 2 details and fluting •Correct Phase 1b, Phase 1c and Phase 2 roof blisters •Rapido’s acclaimed “stainless steel†finish •Full interior detail with constant lighting •Two five-pole, skew-wound motors hidden in the actual engine bays •Crazy amount of underbody detail •Separate underframe piping and conduit •Lit number boards and class lights •Optional working front door Mars light, if appropriate •Fabricated or cast truck sideframes, as appropriate •All wheels powered •Separate grab irons and front door chains •Etched-metal roof grills and fan covers •Wrap-around nose fluting, if appropriate•Separate diaphragms, if appropriate •Loads of roadname-specific details
OVR 6500 HO Pipe Loads
These pipe loads are perfect for our OVRTRAINS FCA 52ft Bulkheads!
NOTE:
1 package of loads will do 2.5 cars.
HO scale CIMC 53Ft Cargo Container Marten Set #2
53Ft CIMC Features:
-Side corrugations with an 8-55-8 arrangement
-Front wall with 10 vertical corrugations
-Roof with 6-54-6 corrugations
-1-3-1 beveled doors
-Placard Holders on front wall, sides and door
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling (6 pkg) #2
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
0022
0031
0037
0041
0056
0062
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Code 83 Track - 2 inch Straight Sections (4/pkg)
Atlas HO Scale Code 83 Snap Track features brown ties and nickel-silver rail. Its perfect for modelers of all skill levels looking for high quality, prototypical-looking track with a near-scale rail height. Brown ties feature molded centerline nail holes for easy mounting with #2540 track nails. Fully compatible with all Code 83 Snap Track and conventional Code 83 track systems. Adapter track joiners #551 are available so you can also use Code 100 track on the same layout if desired. The track geometry of Code 83 track matches that of Code 100 Snap Track, so Code 83 track can be substituted for Code 100 in various Snap Track track plans.
HO 50ft PS-2 CD 4427 Covered Hopper - Santa Fe/ATSF #302170
Add a signature car to your covered hopper fleet with the Walthers Mainline 50ft Pullman-Standard PS-2 CD 4427 3-Bay Covered Hoppers!
Fully assembled and finished in a variety of colorful schemes perfect for 1960s to early 2000s layouts, features include:
-Limited edition - one time run of these car numbers!
-Prototypes handled all types of grains, feed and similar loads
-Matches prototype dimensions
-See-through running boards
-4-3-4 exterior rib pattern
-Bottom outlet gate details
-Placard name plates as appropriate
-Correct 36in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO GP40-2L - DCC & Sound - QGRY #3014
Detailed Information
QGRY FEATURES:
First time in Genesis for QGRY scheme
Nathan K3L horn with air line
Road number fonts, plows, horns, Antennas, and other details per road number
Chemins de fer Quebec-Gatineau Inc. (CFQG), in English- the Quebec Gatineau Railway, operates the former CP line between Quebec City and Gatineau, in Quebec. The line was acquired by Genesee and Wyoming in 1997. At one time the railroad had operated three GMD GP40-2L locomotives of CN heritage, although one of them suffered a wreck in 2005 and has since been used as a parts source for the other units.
ROAD NUMBER SPECIFIC FEATURES:
#3014
-Weed Cutter- rear plow
#3016
Standard EMD medium rear plow
GP40-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO FMC 60ft DD/SS Hi-Cube Boxcar - Cotton Belt/SSW #62671
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
MODEL FEATURES:
- Double 8 foot Youngstown doors
- Photo-etched coupler cross-over platform
- Separately applied grab irons, end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for trouble-free operation
- Body-mounted McHenry operating scale knuckle couplers
- 70 or -100 ton roller bearing trucks with 33 or 36 inch wheels per prototype
- Machined metal wheels with RP25 contours
- Minimum radius: 18 inches
Tru Color Paint 055 - Acrylic - SOO Red 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Bathtub Coal Gondola - Canadian Pacific (Ontario Hydro) #799860
Built: 10-79
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286359
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
Spray Can - Fluorescent Red (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 40Ft PS-1 Boxcar - Port Huron & Detroit #1016
Date: BK 7-62
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
Walthers SceneMaster All Scale - Pine Trees w/ Pin Base, 7-3/8In to 5-1/2In, 14 to 18cm pkg(10)
Product Information:
Put new greenery in your scenery with layout-ready SceneMaster Trees! Choose from a wide range of types and colors featuring:
Ideal for HO, N, TT and Z Scales
Fully assembled, ready to plant anywhere along your railroad
Perfect for new or existing scenery
Sturdy, flexible plastic tree form
Trunks feature realistic texture and gray-brown color
Makes foreground or any highly visible scene more realistic
Push-in pin base for fast and easy installation anywhere
Blends easily with existing scenery
Two realistic colors of foliage on every tree
HO EMD E8A w/HEP - DC/DCC/Sound - Amtrak: Phase 1 #497
The Rapido Trains HO scale Rebuilt E8 w/HEP locomotive features:
Correct HEP muffler and hatch
Multiple dynamic brake options and fans
Sealed, twin-beam headlight configuration
Modified pilot
Blanked sides with appropriate grille work
Skirted or non-skirted fuel tanks
Hyatt roller bearing journal covers
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Accurate E8 sounds provided by ESU LokSound
Complete lighting effects headlights, class lights, backup lights, ground lights, cab lights, Stratolite or beacons and more. -Not all lighting features will work in DC mode.
Numerous road-specific detail parts in both plastic and etched metal.
HO 7/32 inch Open Web Truss - Cellform Style (2pcs)
Use for roof trusses, space frames and other modern and/or futuristic steel structures. Precision Injection Molded in Styrene Plastic. Manufactured with a special tongue and groove connection feature to quickly and accurately attain the desired length.
SCALE
ALL
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
7/32
HEIGHT IN MM
5.6mm
WIDTH IN INCHES
1/4
WIDTH IN MM
6.4mm
THICKNESS IN INCHES
3/32
THICKNESSS IN MM
2.4mm
LENGTH IN INCHES
4-1/16
LENGTH IN MM
100mm
HO 40Ft Fruehauf Exterior-Post Volume Van - Western Maryland: Unnumbered Storage
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
HO GMD SD40-2W - DCC & Sound - Canadian National (Sergeant Stripes) #5345
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. DCC with Sound version features LokSound V5 decoder.
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
Plastruct 90442 HO ABS 2 in Stair (2pcs pkg)
SCALE
HO
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
9/64
HEIGHT IN MM
3.6mm
WIDTH IN INCHES
25/64
WIDTH IN MM
9.9mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
5
LENGTH IN MM
125mm
USE DESCRIPTION
ABS STAIR Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision injection molded
HO GP9 - DCC Ready - Great Northern #682
ETA: May 2023
Detailed Information
GN FEATURES:
Winterization hatch with horn mounted on top
Long hood-forward operation
-Nail- style antenna
GN style fuel tank skirts
In 1967, Great Northern introduced a new paint scheme, consisting of blue, white, and dark grey-green. Known as the Big Sky Blue scheme, it took its name from an unofficial nickname for the state of Montana. Several of GNs GP9 locos received the treatment as depicted here.
In 1970, GN was merged with the other Hill roads to form Burlington northern; however, the Big Sky Blue painted units survived for some time after with a simple BN patch.
ROAD NUMBER SPECIFIC FEATURES:
#682
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#683
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#688
Dynamic brakes
bell mounted on long hood
#690
Dynamic brakes
bell mounted on long hood
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
Modern Police Station - Kit
City or suburb, keep the peace in your HO community with the Cornerstone Modern Police Station kit! With a contemporary design perfect for the early 2000s to the present, the finished model is typical of facilties used by city, county and state police agncies all across North America. Similar buildings can be found in smaller communities where they serve as the village hall and local municipal building too!
Other features include:
Highly detailed with glass atrium and brick walls
Separate doors, windows, gas meter, air conditioner, nonworking lights and electrical panel all included
Printed signs for Washington, Franklin & Springfield Police, window blinds, fire lane markers and warning signs included
Molded in four colors with tinted plastic windows
Dimensions: 8 x 7-5/8 x 3 inches (20.3 x 19.3 x 7.6 cm)
N Scale 1 Amp Mobile Decoder for Atlas Locomotives
Features:
- Board replacement decoder for Atlas N-Scale SD60, SD60M, SD50 and others
- Golden-White Surface Mount LEDs for added realism
- Decoder Lock equipped
Note: In January 2012, DN163A1 was changed from larger through hole LEDs for lighting to smaller surface mount LEDs. Both versions work the same way. This was a manufacturing change to make the process more efficient.
Do not settle for a decoder without the latest features in your locomotive!
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
Plastruct 90043 ABS Channel 1/8 (7pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/8
HEIGHT IN MM
3.2mm
WIDTH IN INCHES
.050
WIDTH IN MM
1.3mm
THICKNESS IN INCHES
.025
THICKNESSS IN MM
0.6mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
TRADITIONAL ABS CHANNELS Use for bracing or lightweight vertical support members in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoo
St Marys #3076
MODEL FEATURES:
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied wire grab irons
Separately applied brake wheel and end ladders
Etched end platforms
Machined metal wheels
Weighted for trouble free operation
33in solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18in
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per road number matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
12 inch Long Round Music Wire - 0.015inch Diameter pkg(4)
Round Music Wire - package of 4
Outside Diameter: 0.015inch
N Scale NSC 64 Ft 6000 Cubic Gondola HS - MWCX #102806
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Erie Lackawanna
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
HO EMD GP40 - DCC Ready - Wisconsin Central #3014
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200077
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
HO 1958 Cu Ft 2 Bay Covered Hopper - Open sides
MKT #40913
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Orange) #506705
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
N Scale NSC 5277 50Ft Plug-Door Boxcar - British Columbia Railway #851028
MASTER MODEL FEATURES:
Bodies: 5111 or 5277 cubic foot styles
Ends: Nine or ten corrugations
Painted safety rails
Doors: 9ft or 10ft plug doors
Side Sills: Deep or shallow sills
Trucks: 70- or 100-ton
N Scale 53ft HC Corrugated Container - Canadian Tire (2pk)
(Red box scheme)
FEATURES:
- All New Tooling; 6-42-6 corrugated sides.
- 5 different doors and two fronts tooled to match prototype photos.
- IBC(Inter-Box Connecting pins) in scale ISO 40ft locations.
- JTC Magnetic connecting system: magnets on bottom & metal top plates.
- Detailed printing as per photographs.
- The IBC pins Mate with JTC 40ft open top containers with Magnets, JTC 20ft containers with Magnets; Atlas 40ft containers, JTC Flatrack containers, JTC 53ft and 48ft containers and future Jacksonville Terminal Company containers.
- Compatible with JTC Retro-fit underframe kits to stack M-T and S-T brand containers on top.
HO 53ft Railgon Gondola - Baltimore & Ohio #350270
(patch; black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PRR X31A Single-Door Boxcar: Plain Keystone - Single Car #76625
(1961-1968)
Detail Variations:
6-pack includes the following numbers:
#68377
#70008
#70094
#70178
#70274
#76625
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
HO F59PHI - DCC Ready - Amtrak #453
AMTRAK FEATURES:
Amtrak 453 and 461 features revised striping and artwork Amtrak 453, 457, and 461 are the perfect power to complement our Genesis Surfliner
LOCOMOTIVE FEATURES:
- Fully-assembled and ready-to-run
- LED Lighting for realistic appearance
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- See through window glazings and radiator fans
- See-through dynamic brake fans if applicable
- Separately-applied horn and wire grab irons
- Separately applied Celcon scale handrails on rear pilot
- Snowplow
- McHenry operating scale knuckle couplers
- All-wheel drive with precision gears for smooth and quiet operation
- Heavy die-cast frame for greater traction and pulling power
- All-wheel electrical pickup provides reliable current flow
- 5-pole skew wound motor with precision-machined flywheels and multi-link drive train for optimal operation
- Wheels with RP25 contours operate on all popular brands of track
- Painted and printed for realistic decoration
- Fully-assembled and ready-to-run out of the box
- Highly detailed, injection molded body
- Multiple road numbers
- Minimum radius: 18inch
HO Scale Highway Signs - Regulatory Signs #2 (1930-Present, red, white)
Product Information
Scale signs, printed in color on thin plastic for easy assembly Each set of signs includes scale posts. CAD designed to Federal Specifications for accuracy and authenticity. Great roadside, streetside and trackside details..
HO 72Ft Centerbeam Flatcar w/Standard Beam - Duluth, Winnipeg & Pacific #626522
Product Information
Shipping lumber by train is easy for your HO railroad with a fleet of WaltherMainline 72Ft Centerbeam Flatcars on the job! Designed to speed loading and unloading, these bigger cars entered service in the 1980s and quickly became a favorite with shippers and customers. These nicely detailed models are based on earlier cars built with oval cut-outs (popularly known as -opera windows-) on the centerbeam to reduce overall weight, which are still in service with a wide range of railroads and lumber producers. Other features include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1980s to the present
Heavy die-cast metal underframe for excellent tracking
Correct 36inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Model loaded cars in minutes with SceneMaster Wrapped Lumber Loads (#949-3121-series, each sold separately)
Ballast - Medium Gray - Shaker (57.7 in3)
Use ballast and coal for any scale to model realistic railroad track, gravel roads, crushed rock and stones, hopper loads, and coal piles. Available in several colors and sizes, you can mix and match for a superior realistic effect. Ballast and coal are lightweight and easy to use. Watch the Woodland Scenics video about how to apply it and attach with scenic cement!
ALLERGY CAUTION: Ballast contains tree nut by-products.
SD70MAC Diesel, w/ DCC & Sound - CSX #4577
Era: 2016+
EMD SD70MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
First time ever with front and rear Rubber MU hoses, Trainline hoses, Cut levers, and rear Spare
CSX FEATURES:
CSXs latest -Boxcar- scheme. Simplified cab roof antennas. Rear pilot mounted spare knuckles. 4526 and 4547 are ex CSX 725 class and 4577 and 4579 are ex CR 4130 class.
LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PROTOTYPE SPECIFIC INFORMATION
During the early-1990s, EMD teamed-up with German engineering company Siemens to produce a freight locomotive that was capable of providing AC-traction drive currents, and thus providing a high-horsepower rating and lower fuel consumption for railroads which had an ever-increasing demand for saving fuel consumption by using a lesser amount of units to haul most of their trains.
The EMD SD70MAC was first introduced in early 1993, and began production later-on during the same year after numerous tests and improvements were made. Since then, the EMD SD70MAC has been a staple of heavy freight lines across the country.
HO G2 SD80MAC - DCC & Sound - Chicago and North Western #8108
Detailed Information
CNW FEATURES:
-What-if- scheme based on CNWs cancelled OLS AC4400 order
CNW-type 5-chime horn
No marker lights
According to some reports, CNW signed a letter of intent to EMD to order a minimum of 15 SD80MACs in mid 1994. Because of the 1995 merger with UP, the order was canceled with the projected delivery to be mid-late 1995. The units, which were to be constructed as an add-on to the Conrail order, were to have been used in pairs on Wisconsin Electric (WEPX) coal trains, and were to have been numbered 8101-8115. Our CNW SD80MACs feature Conrail-style details and are painted in the attractive lightning stripe scheme with Operation Lifesaver logos - -As close to what almost-was as it gets!-
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
CV chart included in the box
Rustic Cabin
These preassembled, hand-painted and fully detailed structures are great for for detailing country scence in just a few minutes.
Woodland Scenics HO Scale Rustic Cabin is based on a getaway in the woods or a disheveled shanty on the wrong side of the tracks. This fully assembled building features old board and batten siding, a covered porch and shake shingle roof. Two rocking chairs on the porch provide a convenient location to watch a sunrise, and a milk can sits off to the side. Additional features include a pile of wood to prepare for cold nights, a wood stove pipe, a bent TV antenna, and an electric meter on the back of the cabin. The Rustic Cabin also has a Just Plug(TM) LED porch light for extra realism. Check out the entire line of Woodland Scenics HO Scale Built-&-Ready Landmark Houses.
HO Concrete Parking Barriers (12pk)
DESCRIPTION:
Color Gray. Prototype photo shown.
DIMENSIONS:
1 x 1/8 inches.
Large Spotlight - Just Plug - pkg (2)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .125x.125 (6pcs pkg)
HO Alphabet & Numbers - Stencil Gothic Railroad - White - Waterslide Decals
Pro Grass Precision Micro Applicator
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. The Static Grass Applicators PSG-1, 2 and 3 electrostatically charge the grass filaments so that they stand vertically, regardless of the terrain. The PSG-1 applicator is designed for creating medium to large areas, such as lawns, fields, moorlands etc. Mixing various lengths and colours of grasses can produce highly realistic textures and effects.
HO Scale 89ft Channel Side Flatcar - Trailer-Train/KTTX #150469
(1960s brown, Twin 45ft)
Built especially for the bigger trailers entering service in the 1960s, this Walthers Mainline model of the 89ft channel side flatcar is a must for period intermodal modeling in HO scale. Based on the F89F flatcars owned by Trailer Train and many railroads, over the years these cars carried 28, 40, 45, 48, and 53ft trailers.
FEATURES INCLUDE:
- One time run of these road-numbers, limited quantity available!
- Heavy die-cast metal underframe for great performance empty or loaded
- Used in piggyback and other service 1963 to the present
- Prototypical C-shaped steel channel side sills
- Detailed brake gear
- Swinging coupler pocket for 18 inch radius curves
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- IC
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Illinois Central (IC) -Delivery 2-1970- is a hot car, no matter how you look at it. That orange paint
coupled with the sharp black and white split-rail logo is one of the most iconic schemes for that era. The IC cars feature their as-built 1970 appearance that includes Gypsum crossover platforms, Ajax brake hand brake housing, Greenville-applied tack board locations and that beautiful End-of-Car Cushioning underframe setup. The paint, lettering and graphics are truly Tangent Accurate from the large, centered Illinois Central lettering down to the distinctive IC-style dotted return route box with instructions to send the car back to the GTW in Flint, Michigan. 70-Ton Trucks with 33in wheels and rotating Timken roller bearing caps finish off this Mainline of Mid-America offering. Our IC masterpieces are available in four different numbers.
HO 40Ft Ortner 100-Ton Open Aggregate Hopper - Norfolk Southern #153389
Product Information
Move heavy bulk loads for your railroads customers with a fleet of WalthersProto 40Ft Ortner 100-ton Open Aggregate Hoppers. Highly detailed and fully assembled, other features include:
One time run of these roadnumbers, order now - limited quantity available!
Distinctive high-sided design in service from 1970s to present
Prototypes used for hauling heavy aggregates including limestone, iron ore and taconite pellets, gravel, sand and more
Factory-installed air-equipped door details as appropriate
Factory-installed wire grab irons and end railings
Removable load included
Detailed brake gear
Weighted for excellent tracking
Ultra-smooth rolling metal axles and RP-25 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
HO EMD SW9 - DC/ Silent - New York Central (NYC As Delivered) #8930
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
N Scale Single-Track Truss Bridge 9-3/4in (248mm)
(Black)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO RTR ACF 4650 3-Bay Hopper - SOO Line #74205
Date: BLT 11-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
19/32 inch Vertical Railing (2pcs)
Use for hand rails, stair rails, roof trusses, grating and other steel structures. Precision Injection Molded in Styrene Plastic. May also be used for trellises, fencing window bars, etc.
SCALE
ALL
MATERIAL
STYRENE
COLOR
VARIOUS
HEIGHT IN INCHES
19/32
HEIGHT IN MM
15.1mm
WIDTH IN INCHES
3/32
WIDTH IN MM
2.4mm
THICKNESS IN INCHES
.055
THICKNESSS IN MM
1.4mm
LENGTH IN INCHES
6-7/8
LENGTH IN MM
175mm
Strolling Figures 6 pcs
HO SceneMaster City Street Accessory Package
Adds extra realism to streets and structures
Found in cities big and small from the 1960s to the present
Great value with:
- 2 curbside mailboxes
- 2 post-/wall-mounted mailboxes
- 6 trashcans w/dome tops
- 4 fire hydrants (2 each of 2 styles)
- 2 double-sided bike racks (each holds 12 bikes) --
- 2 single-sided bike racks (each holds six bikes) --
- 6 parking meters
- Phone booth w/phone
- Phone enclosure w/phone
-Easy assembly, with appropriate decals for the finishing touch
--Bicycles are available separately
Bikes with Accessories Kit
DH165K0 1.25 Amp HO Scale Mobile Decoder for Kato, Stewart, Atlas & Other Locos
Features:
DH165K0 Fits Kato, Stewart, Atlas & Other
HO Locomotives
Compatible with Sound Bug
Decoder Lock equipped
Current Rating-Motor - 1.25 Amp (2.0 Amps Peak)
Size - 73.07mm x 16.93mm x4.4mm
Installation - Board Replacement
Function Outputs - 6-500mA
Function Type - FX3
Features - Series 5
For Use With Sound Bug Sound Only Decoder
RTR 30RTR 30,000 Gallon Ethanol Tank Car - Archer Daniels Midland - (3 pack) #1
Detailed Information
30746, 30800, 30855
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Late Red) #475080
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
LOCOMOTIVE FEATURES:
CN “website†scheme
CN style plow
Correct trucks per road number
Forward and reverse ditch lights
Nathan K3L horn
#5620/#5624
Late EMD trucks
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
HO NSC Ballast Hopper - CSX (6pkg)
1980s+
6-Pack includes the following numbers, all individually packaged: #965545, #965551, #965593, #965657, #965668, #965685
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
N Scale Curved Track - 15-degree Radius - 9-3/4in Radius-(4/pkg)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed.
The patented Unijoiners (included) lock the track sections together firmly and evenly.
The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
Blackened Metal Spikes - Small 1/4 in long - (15,000 Bulk)
Hold your rail in place like the real railroads do with these steel spikes. Preblackened for more realism, they provide good holding strength when spiking rails to real ties. Packages are sold by weight and actual number of spikes included is approximate.
HO RTR ACF 4650 3-Bay Hopper - Great Northern #171975
Date: 11-66
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
N Scale Dugans Paint Store - Built & Ready Landmark Structures - Assembled
This layout-ready building features full detailing, signs, a printed interior and a warm white LED interior light thats compatible with Woodland Scenics Just Plug Lighting System.
Measures:
2-1/2 x 2 x 2 1/2in
6.35 x 5.08 x 6.35 cm
HO Corrugated Fence (Scale Model) - Kit
Product Information
PLEASE NOTE - This product is a miniature scale model / toy, not an actual fence.
Walthers Cornerstone HO Scale Corrugated Fence kit is ideal for enclosing areas where weaker fencing is likely to get damaged. Fencing at a scrap yard serves many purposes - to block the view from the outside, to keep scrap piles from spilling over the property line, to prevent passers-by from injury and, primarily, to prevent theft. This type of corrugated fence can also be used at all kinds of industrial sites such as recycling facilities, pick-a-part style auto junkyards and steel mills. The kit includes 240 scale feet of fencing with three double gates. Use the Corrugated Fence Kit to add realism around your Cornerstone HO Scale industrial buildings or scenes.
Great detail for trackside businesses and industries
Includes 240Ft 73.2m scale feet of fencing 1-1/4inch 3.1cm tall
Adds detail to diesel-era scenes
Easy-to-build plastic kit
Molded in appropriate base color
DN163K0B 1 Amp N Scale Mobile Decoder for Kato N scale F3 A & B
Features:
Designed to fit the Kato N scale F3 A & B
Golden-White LEDs for added realism
Decoder Lock equipped
HO RTR 68Ft Railgon Gondola - BNSF #518501
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Norfolk & Western Rack & Flatcar #412007
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO G2 Dash 9-44CW - DCC/Sound - C&NW #8613
C&NW FEATURES:
- Prototypically accurate appearance
- C&NW roof vent
- A/C cabinet w/out A/C vents and components per as-delivered detail
- Curved engine compartment hood profile
- Early tabbed dynamic brake intake panels
- Early style dynamic brake exhaust fascia
- #8613 & #8646 Early-delivery units with 40 inch wheels and reinforced trucks
- #8701 Late-delivery unit with 42 inch wheels and GE Hi-Adhesion side frames
- As-delivered features
- Unmodified hood
- Sound version features onboard DCC decoder with SoundTraxx Tsunami2 sound
DASH 9 SERIES LOCOMOTIVE FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Coupler cut levers
- Flexible rubber MU hoses for durability
- Flexible rubber trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Fine-scale Celcon handrails for scale appearance
- Windshield wipers
- Lift rings
- Wire grab irons
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Sander lines
- McHenry scale knuckle couplers - Kadee compatible
- Genesis drive line with 5-pole skew wound motor, precision machined flywheels, and multi-link drive train
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
SOUND EQUIPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO ACF 3560 Covered Hopper - Duluth Missabe & Iron Range #5019
Features:
-True scale dimensions with accurate details
-Weighted, detailed underframes
-Equipped with AccuMate Knuckle Couplers
-Trucks equipped with free-rolling metal wheels
-Accurate painting and lettering
HO 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - CSX #242034
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Prototypes in service from late 1980s to the present
- Separately molded and applied hopper gates
- Correct 36 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
Mini Hack Saw Frame - Includes 32 TPI Blade
The Zona Mini Hack Saw has a 32 teeth per inch blade, sturdy steel frame and a 2-1/2inch cutting depth. Its 9-1/2inch long and has a 2-1/2inch cutting depth.
N Scale 20ft Reefer Container - ONE (3pk)
MODEL FEATURES:
- Highly-detailed, injection-molded body
- Blister packaging for easy viewing
- Decorated models fully-assembled and ready to run out of the package
- Reefer unit to match prototype
HO RTR 45Ft Fruehauf Z-Van Trailer - Conrail/ Trailvan #202204
Detailed Information
MODEL FEATURES:
Separately applied mud flaps
Rubber tires
Fully-assembled and ready to use out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Evergreen Scale Models 4031 0.30in Opaque White Polystyrene Clapboard Siding (1sheet)
Plastruct 91250 Clear Copoly Sheet .010 (3pcs pkg)
.010 CLEAR PLASTIC SHEET
An excellent clear plastic with many uses.
Copolyester is tougher and less prone to split or shatter than Acrylic or Styrene, and is resistent to stress whitening.???? Can be cut with scissors, knife or sawn without burning.?? Glues well to itself, but when gluing to most other plastics an industrial grade Cyanoacrylate Glue is recommended.?? Precision Extruded.
HO 60ft PS Flatcar - Soo Line #5126
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO EMD SD9 - DCC & Sound - Chicago, Burlington & Quincy #831
-yellow frame
Chicago, Burlington & Quincy
- Phase IV (First time for a plastic model!)
- Higher short hood with a corresponding cab height
- Cornered-off section on the long hood behind the cab
- Two 48inch radiator fans as opposed to the normal (four) 36inch fans
- Conduit pipes were removed from the top of the radiator
- No ladders on the short hood end
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO FMC 60ft Hi-Cube Ex-Post Boxcar - WP #3174
MODEL FEATURES:
- Single 10ft Youngstown door
- Separately applied grab irons, end ladders, and brake wheel
- Photo-etch coupler cross-over platform
- Highly-detailed, injection-molded body
- 36 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Minimum radius: 18 inches
HO RTR ACF 2970 Covered Hopper - Winchester and Western (W&W) #4508
Detailed Information
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons and stirrup steps
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple road numbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
Give any construction site a lift with this SceneMaster 2-Axle Truck Crane on the job! The kit features:
Designed for easy assembly - illustrated step-by-step instructions
Must-have equipment for modern industrial, construction or maintenance-of-way fleets
Build for on- or off-road work with telescoping boom and positionable outriggers
Positionable crane can be rotated 360 degrees, boom can be raised and lowered
Great for lifting chores at the Cornerstone Skyscraper Construction Site (933-3761, sold separately)
Molded in 2 colors and clear plastic
Photo shows assembled model.
HO End of Train Device with Track-Powered Flashing LED
- Truck-Mounted
- Track-Powered
- Flashing LED
- End-of-Train Device
- Roller Bearing Truck
HO Blunami BLU-PNP8 - 8 Function Bluetooth Controlled Sound Decoder - EMD-2 Diesels
Blunami will change the way you enjoy the model railroading hobby! The BLU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturers diesel models such as those made by Atlas, Athearn, and Intermountain Models. It is suitable for a wide variety of models from HO to S scale. It can be operated in three different ways: DC, DCC, and Wireless mode. Using the Blunami App, you can operate your locomotive incredibly easily.
Need Help Choosing a Sound Profile?
We have tons of sounds to match a wide range of locomotives. So many, in fact, we cannot fit them all on one decoder. Therefore, they are broken up into sound profiles of like sounds (EMD, GE, ALCO, etc.). If you do not know which sound profile you need, the best place to start is the Sound Selection References. These will list all the prime movers or exhaust chuffs available on each sound profile.
DYNAMIC DIGITAL EXHAUST :
For added realism, you will love our reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to create the most realistic experience possible.
HIGH-QUALITY SOUND LIBRARY:
Our large selection of sound effects includes:
- Up to 12 Prime Movers in each sound profile
- Up to 12 Bells
- 40+ Airhorns
- Additional couplers, cab chatter, and more!
ADDED REALISM:
Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, and more.
EASY INSTALLATION:
This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.
This 2-amp, universal-style format includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.
Dimensions: 74 x 17 x 5mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 8
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7V ? 22V
Sound Channels: 16
HO RTR 52Ft Mill Gondola - Rock Island #680149
Detailed Information
MODEL FEATURES:
Body-mounted McHenry operating scale knuckle couplers
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Razor sharp painting and printing
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
Walthers SceneMaster 3161 HO Scale - Wrapped Lumber Load for 72 FT Centerbeam Flatcar - Weyerhaueser
Put your railroad to work moving these Walthers SceneMaster Wrapped Lumber Loads from sawmills to local building suppliers. Made especially for the WalthersMainline 72Ft Centerbeam Flatcars ( 910-4800 series, each sold separately), each is prepainted and lettered in authentic schemes, and snaps easily onto the car to add realistic detail in a matter of minutes.
HO EMD SW1200 -DC/Silent - Grand Trunk #1512
(Flexicoil Trucks)
The HO Scale Rapido SW1200 features:
- Designed from original blueprints and field measurements
- Heavy diecast frame, chassis and gearboxes for superior pulling power
- Rapidos renowned silky smooth-running drive system
- Working cab interior light and inspection lights
- Fully detailed Type A or Flexicoil trucks, as appropriate
- Full cab interior with working cab interior light and non-working fire extinguisher and fridge (where appropriate)
- Working headlights and illuminated number boards at both ends
- Some models have a rotary beacon or flasher/strobe as appropriate
- Separate handrails, including crash bars inside the cab
- Multiple exhaust stack and battery box door styles
- With or without working drop steps, as appropriate
- Incredible underbody piping and conduit detail - a Rapido hallmark!
- DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings from a 567 prime mover
Ready-Made Realistic Trees - Deciduous - 6 to 7inch 15.2 to 17.8cm pkg(2) - Medium Green
HO - Nathan K2 K12 2-Chime Air Horn - Lost Wax Brass Casting
Railroad Truck Color Portfolio Volume 1: A-I (Softcover)
By: Robert J. Yanosey
Released: April 1, 2021
Featuring AAR, AMT, Apache, Asplundh, ATRW, ATSF, BA&P, Bay Colony, BK, B&M, BN, BNSF, B&O, BB, CF&W, C&G, CCL, CS, CKIN, CMSL, CN, CNJ, CNW, C&O, CP, CR, CSX, CV, CW, CWP, DMIR, D&H, DL, DRGW, EJ&E, EL, ETL, EMC, FL, GM&O, GMRC, GR, GTW, IC, IHB, INRC, and IT!
Evergreen Scale Models Opaque White Polystyrene Strips 14in .250x.250 (3pcs pkg)
HO Greenville 86Ft Double Plug Door Box Car - Ann Arbor (Delivery 1978) #10004
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Ann Arbor (AA) -Delivery 1978- offers one of the most distinctive railroad logos to come out of the 1970s: the Ann Arbor -Ferry in the Fog.- Built in November of 1978, this group of 20 cars represents the final Greenville 86Ft boxcars built. They were leased by the Michigan Interstate, who operated the State of Michigan-owned Ann Arbor at this time. The cars worked out of Fords Saline, Michigan plant, carrying chrome and trim parts around to Ford assembly plants and parts warehouses. These Tangent models feature an accurate late-Greenville body with 5 grab irons on the left and right sides of the car. The car is equipped with body-mounted brake rigging hanging down from the underframe and 100-Ton trucks with rotating Timken roller bearing caps, just like the prototype. The Freightmaster End-Of-Car Cushioning details really pop, since Ann Arbor painted the face of the striker orange, a detail we were very diligent to duplicate. The Ann Arbor Railroad System lettering is carefully replicated on this model, from the big Ann Arbor Ferry Boat down to the small black and white assignment stencils.
Bi-Level Auto Racks - BNSF New Image - Orange Rack on TTGX Flat Car #TTGX 965521
LED Bulb - Long/Standard Length 6.35mm (12)
HO RTR 68Ft Bulkhead Flatcar - Undecorated
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
HO RTR ACF 4650 3-Bay Hopper - Great Northern #171773
Date: 11-66
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
Blended Turf - Earth Blend - Bag (54.1 in3)
Use Earth Blend Blended Turf as an earth-tone base covering over pigmented terrain. It is colorfast and blends naturally with other foliage. Use for any scale.
GP15-1 - DCC & Sound - Chicago North Western No.4409
In the mid-1970s EMD developed the new GP15-1 model in an
effort to offer their customers a replacement for their medium sized
road switchers which were wearing out. Many railroads (i.e. ATSF,
SP & ICG) were rebuilding their older road switchers and EMD
wanted to offer them a different option. Unfortunately there were not
a lot of takers and only 310 units were built for US railroads. This
small 1,500 horsepower unit came with a radiator intake section
similar in appearance to the special one that EMD was using on
the larger SD40/45T-2 models being produced for the Rio Grande
and Southern Pacific to alleviate overheating issues in their many
tunnels. Railfans dubbed these lager units Tunnel Motors which
led to the smaller GP15-1s receiving the moniker -Baby Tunnel
motors.- Many GP15-1s remain in service today for major Class 1
railroads, regional railroads and shortlines.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED bulbs for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
CNW purchased 25 GP15-1s in 1976 to supplement their collection of used and original road switcher fleet. They could be found in local service in the Chicago area and other upper Midwest points on the CNW system. By the time of the UP merger in 1995 there were only 10 of them left in service.
CNW FEATURES:
Nose mounted Gong style bell
Nose Gyralight
1990s Traditional yellow paint scheme
ATS shoes
Separate Switch Broom included
Operating beacon
ROAD NUMBER SPECIFIC FEATURES:
No.4405
Operation Lifesaver paint scheme
No.4410
Operation Lifesaver paint scheme
No.4409
1990s Traditional yellow paint scheme
Juneco Scale Models Stack of 18 Sacks (2/pkg)
Plastruct 90173 Butyrate Half Round Profile 5/16 (4pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
GRAY
OUTSIDE DIAMETER (O.D.)
5/16
7.9mm
INSIDE DIAMETER (I.D.)
3/16
4.8mm
THICKNESS IN INCHES
1/16
THICKNESSS IN MM
1.6mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
HALF ROUND PROFILES Use for the top housing unit of corrugated roll-up doors, large scale gutters and bannister railings, and decorative trim for inside and outside buildings.
HO Greenville 86Ft Quad Plug Door Box Car - Delivery 12-1969 - GTW #305770
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Grand Trunk Western (GTW) -Delivery 12-1969- is notable for several reasons. First, the classy GTW scheme looks especially good on this car (in our humble opinion) with the large GT logo centered between the paired doors. Second, GTW was the largest purchaser of Greenvilles quad door box car design, making them highly statistically relevant for modelers in the US and Canada. Painted in the characteristic GTW blue color with white stenciling, these cars are sure to be crowd pleasers and were seen widely. The GTW cars feature their as-built 1969 appearance that includes Gypsum crossover platforms, Ajax brake hand brake housing, Greenville-applied tack board locations and that beautiful End-of-Car Cushioning underframe setup. 70-Ton Trucks with 33inch wheels and rotating -Benco-6- roller bearing caps finish off this dominant offering. Our GTW masterpieces are available in eight different numbers.
SDN144A1 w/Sound
Features:
Drop in Mobile Decoder for Atlas N Scale SD60/40 and similar Locomotives.
Preloaded with SD60/SD40 dual Sound Scheme
4 FX3 Functions
Factory 18mm x 10mm, 8 ohm speaker
Full Digitrax Series 4 mobile decoder feature set
Speed Tables
Simplified Scaleable Back EMF
Advanced Consisting
Forward and Reverse Trim
Transponding
Supersonic Motor Drive
Decoder Lock and much more
Use PR3 and SoundLoader Software to download your own fully customizable sound scheme to the decoder
No external sensor required for sound workload changes
Current Rating 1.00 Amp (1.25 Amps Peak)
Size 0.374inch x 3.875inch x 0.1570inch
9.5mm x 98.3mm x 4.0mm
Installation Drop in Mobile Decoder
Function Outputs 4-200mA
Function Type FX3
HO EMD SW900 - LokSound 5 Sound & DCC - Southern Pacific #2265
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- ESU LokSound 5 sound for DCC and DC layouts
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
HO - PRR Induction Phone Details - Transmitter Used on Locos & Cabooses
Atlas HO Scale EMD GP38, Gold Series- With ESU LokSound DCC, RJ Coleman #3803
Atlas Item #: 10003244
MODEL FEATURES:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional features included but not installed (GP-40s only)
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
SOUND & DCC FEATURES FOR GOLD SERIES:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
Prototype Overview:
In 1966 EMD introduced a new line of locomotives based on the 16-cylinder 645-series prime mover. The
40-series included a six-axle and four-axle model, the latter being the GP40. A total of 1,145 units were
produced between 1966 and 1972. These turbocharged 3,000hp locomotives were used primarily in road
freight service. The GP40 was a versatile locomotive that could be found across the US hauling drag freights
over mountain passes and leading high-speed intermodal trains across flat terrain. Three rooftop radiator fans
at the rear of the long hood differentiate a GP40 from its lower horsepower counterpart, the GP38, which has
two fans at this location.
Concurrent with GP40 production, EMD offered a lower horsepower, non-turbocharged locomotive based on the
same 645-series prime mover. The four-axle GP38 was rated at 2,000 hp and had the advantage of costing less
than the GP40. A total of 727 units were produced between 1966 and 1971 when the model was superseded.
The wheelbase of the GP38 was identical to that of the GP40. Both units shared the same EMD road-switcher
style body that was introduced with the GP35 in 1963. A desire for standardization caused the GP38 to share
the same wheelbase, frame and many external components as the GP40. The GP38 was purchased by large and
small roads alike. It was routinely found in local and road freight service throughout the US. Many GP38s and
40s are still in service today, either having been rebuilt or modified. A locomotive that has withstood the test of
time.
Many options exist on the Atlas GP38 and GP40 models. Some of these are: Long hood with or without dynamic
brakes, multiple fuel tanks, high or shoot hoods, and more.
Bi-Level Auto Racks - Ferromex Gray on Gray TTGX Flat Car #706720
All are Ready-to-Run.
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene-
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage.
HO Union X-3 Tankcar - Procor Limited #38110
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO RTR 53Ft Jindo Container - UPSU (3pkg) #2
MODEL FEATURES:
Newest vertical rib front
Easily stackable
Separately applied door closure rods
Fully assembled
Each container individually numbered
Razor sharp printing and painting
C-27 ICC Caboose w/lights - B&O/Chessie System #C-3915
The ultimate detail with the best Genesis features.
International Car Co. began specializing in caboose production as early as 1941. When the railroads entered the 1960s, many needed to replace their aging, in some cases home shop built, cabooses. International Car responded with a product that could be tailored to each railroads specific needs. Using quality components and modern engineering, ICC became a leading name within the industry.
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
ICC CABOOSE FEATURES:
- Better than brass detail including roadname and road number specific detail Laser-Sharp Painting and Printing
- Interior seating for the addition of crew figures.
- See-through End Platforms and Steps
- Flush Window Glazing
- Wire-form Grab Irons
- Caboose trucks with animated rotating bearing or static friction bearing caps
- Axle Generator Details
- Body-Mounted McHenry® scale knuckle-spring Couplers
- Machined Metal RP25 Profile Wheel Sets
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Separate wireform grab irons, etched metal coupler platforms
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for trouble-free operation
- Window packaging for easy viewing, plus interior plastic blister safely holds the model for convenient storage
- Multiple road numbers
- Minimum radius: 18in
LED LIGHT EQUIPPED FEATURES:
- LED lighting for long life and reliable operation
- On-board DCC Decoder by NCE
- Operates in DCC and Analog (DC) with lighting Functions Controllable in DCC
- Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
- LED Interior Lights
- All functions NMRA compatible in DCC mode
SOUND EQUIPPED MODELS ALSO FEATURE:
- Soundtraxx Tsunami SoundCar decoder w/ included sounds:
- Air horn or conductors whistle as appropriate
- Clickety-clack with optional wheel flat spot sounds
- Brake set/release sounds including retainers and brake squeal
- Big Hole emergency brake application sound
- Handbrake tie-down/release
- Adjustable flange squeal
- Air, horn, and bell sounds work seamlessly with Soundtraxx locomotive sound decoders
- Supports Advanced Consisting in DCC
- Full DCC functions available when operated in DCC mode
- All functions NMRA compatible in DCC mode
B&O CHESSIE FEATURES:
- Brand NEW ICC B&O Style body
- Angled window screens
- Early style axle-driven generator
- Caboose trucks with roller bearing caps
- Ash pans
- Toilet Drain
- Illuminated marker lights, where appropriate
- Reflectors on end cages
- Overhanging, diagonal-panel roof with or without blank panel at smoke jack per prototype
- Overhanging, x-panel roof for the B&O Chessie caboose
Chessie #3835, #3887, #3915 features: First time ever C26A version. Dayco axle generator with notched undeframe.
Chessie C-3771 Gold Caboose - Unique safety slogan and Gold and Silver Paint
River City Textiles - 12-7/8 x 2-3/8 x 11-1/8 inches - 32.1 x 5.9 x 27.8cm Kit
Finally! There is a quick, affordable way to add scenery anywhere space is limited - without the added time and trouble of kitbashing!
Great for modules and shelf-type layouts, the model also includes a rooftop water tank, elevator headhouse and decals for several different business names. The loading dock provides plenty of opportunities for realistic freight operations.
Trinity 3230 Covered Hopper - CIT Group/Capital Finance #95966
FEATURES:
All new tooling
Ready to run
Injection molded plastic
Fine scale detail
Separately applied wire grab irons
Separately applied wire cut levers
Etched metal roofwalks
Crisp painting and printing
HO All-Weather Window Set - 3 Pane (6)
Detailed Information
All Weather Windows (6-pack)
Each all weather window contains a clear -window- glazing insert. Kit contains parts to build six individual all weather windows.
Small Brass Telescopic Tube Assortment (12 pkg)
K&S Engineering Telescopic Tubing Packs are perfect for creating tapered poles, sliding parts and more. Available in 12inch long section packs, individual tubes have a .014 wall thickness and come in a range of telescoping sizes. Telescopic Tubing Packs are available in Brass, Copper and Aluminum in various size ranges.
12inch Long x .014inch thick - Brass
Outside Diameter: Varies from 1/16inch to 13/32inch
This package contains the following: 1/16 in., 3/32 in., 1/8 in., 5/32 in., 3/16 in., 7/32 in., 1/4 in., 9/32 in., 5/16 in., 11/32 in., 3/8 in., and 13/32 in. O.D. x 0.014 in. Wall Thickness x 12 in. Length.
HO 34Ft Ribbed Hopper - Pennsylvania (4 pkg) #1
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Removable coal load in each car
Machined metal wheels
Mchenry scale knuckle spring couplers installed
A total of 9 different road numbers available for each road name
Minimum radius: 15inch
HO 70-Ton 12-Panel Hopper - Chesapeake & Ohio #151623
Blt.3-63
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO Gunderson 6276 50Ft Plate F Boxcar - BKTY #156836
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
HO ICC Caboose w/Lights - Burlington Northern #10136
Era: 1941-1970, 1971-1990
BN FEATURES:
- First BN caboose in Genesis
- Former CB&Q NE-13 A class caboose
- NE-13 A style end cage
- Etched window screens
- Fire cracker style antenna
- Functioning marker light
- Caboose trucks with turning roller bearing caps
- 1970s appearance
ICC CABOOSE FEATURES:
- Better than brass detail including roadname and road number specific detail and laser-sharp painting and printing
- Interior seating for the addition of crew figures
- See-through end platforms and steps
- Flush window glazing
- Wire-form grab irons
- Caboose trucks with animated rotating bearing or static friction bearing caps
- Axle generator details
- Body-mounted McHenry scale knuckle-spring Couplers
- Machined metal RP25 profile wheel sets
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Separate wireform grab irons, etched metal coupler platforms
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for trouble-free operation
- Window packaging for easy viewing, plus interior plastic blister safely holds the model for convenient storage
- Multiple road numbers
- Minimum radius: 18 inches
LED LIGHT EQUIPPED FEATURES:
- LED lighting for long life and reliable operation
- On-board DCC Decoder by NCE
- Operates in DCC and Analog (DC) with lighting Functions Controllable in DCC
- Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
- LED Interior Lights
- All functions NMRA compatible in DCC mode
SOUND EQUIPPED MODELS ALSO FEATURE:
Soundtraxx Tsunami SoundCar decoder w/ included sounds:
- Air horn or conductor?s whistle as appropriate
- Clickety-clack with optional wheel flat spot sounds
- Brake set/release sounds including retainers and brake squeal
- Big Hole emergency brake application sound
- Handbrake tie-down/release
- Adjustable flange squeal
- Air, horn, and bell sounds work seamlessly with Soundtraxx locomotive sound decoders
- Supports Advanced Consisting in DCC
- Full DCC functions available when operated in DCC mode
- All functions NMRA compatible in DCC mode
HO 90 Degree Crossing
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes! Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation. Suitable for all types of layouts, whether temporary or permanent. This modular track system features an integrally molded roadbed for realistic appearance. Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended.
Morning Sun Books Inc. Chesapeake & Ohio Power In Color Volume 2
Stephen Timko
The massive fleet of over 560 GP7s and ?9s, to the modest purchases of Baldwin and Alco models, including the late first-generation SD18s are featured! Includes the Pere Marquette-ordered EMD BL2s.
HO EMD GP39-2 - DCC & Sound - CSX/YN3 #4307
Detailed Information
CSX FEATURES:
Ex-RDG
Early phase 1 body
Illuminated number boards
Front and rear ditch lights
5-chime horn
RV style roof mounted A/C
Nose toilet hatch
Correct CSX artwork and colors
Chessie/CSX -mail slot- style battery box doors
CSX purchased 20 ex-Reading/D&H GP39-2s in the late 1980s. They operate alongside CSXs other EMD GPs providing power for locals, haulers, and road switching assignments. Most of the fleet can still be seen operating today.
ROAD NUMBER SPECIFIC FEATURES:
#4300
Front and rear CSX style ditch lights (alternate flash in DCC mode)
small front EMD plow
mixed Hyatt and Timkin bearing Blomberg B trucks with outer brake shoes removed
#4307
Front and rear CSX style ditch lights (alternate flash in DCC mode)
small front EMD plow
mixed Hyatt and Timkin bearing Blomberg B trucks with outer brake shoes still installed
#4311
Front tall EMD style and rear CSX style ditch lights (alternate flash in DCC mode)
small front EMD plow
mixed Hyatt and Timkin bearing Blomberg B trucks with outer brake shoes removed
GP39-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SECX #2330
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO ALCo RS-3 - DCC Ready - Norfolk & Western #306
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
Analog (DC) version has 21 pin socket for DCC module.
DCC non sound recommended decoder for Current Production (21 pin socket)
ESU #59629
or
TCS #EU-821 8 function decoder
FEATURES:
- Blue with Yellow lettering
- 7 foot cab
- cab mount horn
- body side number boards
- under deck storage box
- dynamic brakes
HO RTR ACF 4650 3-Bay Hopper - ATSF (Gray Ga-150) #305109
Date: BLT 6-65
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO 68Ft Bulkhead Flatcar - General American (GAEX) #63089
Features:
Side stake pockets
Simulated tie-loops
Fishbelly center-sill
Prototypical pull-plates and lift rings
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
Brass Rolled Foil - 0.005 Thick x 12 inch Wide x 30 inch Long
-1 Roll
HO Horizon Club-Dinette - Amtrak (Phase lV) #58103
PHASE SPECIFIC FEATURES:
- Half dinette, half business-class seating
- Modified parlor end-doors
- Fixed end-door steps
GENERAL FEATURES:
- Coach, Dinette, Club-Dinette car body styles
- All-new ADA Coach cars
- All-new car numbers
- Full underbody and interior detail
- Correct GSI G70 trucks with metal wheelsets and reliable power pickup
- Accurate painting and lettering
- Tinted windows
- Improved interior lighting in both DC and DCC
- Independently-controllable end marker lights
- Metal side grab irons
HO Delivery G43A 2-1968 Gondola - Penn Central #576104
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inchh Wheels
PC -Delivery G43A 2-1968- in the original Penn Central green paint scheme, and a PC version we have not yet offered! These gorgeous models have 2 placards in place for the PC reporting marks, road numbers, and ACI label on the left side of the car. On the right side is an additional placard that includes a PC logo and Penn Central lettering. These placards are utilized on this class of PC car since these cars have side corrugations on each panel, where they knew that putting paint on the corrugations would not last very long! These cars have corrugated ends, and the Tangent replica includes oxide red car interiors ? on the interior walls and ends ? like the prototype. We even duplicated the slight green overspray on the inside end corners! The 100-Ton trucks feature accurate rotating -Timken- caps.
Tangent Scale Models PS4750 Covered Hopper- MKT- Original 12-1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
MKT Original 12-1979 in the eye-catching green scheme with the large yellow MKT painted on the flanks of the car. Like our BN models, the Tangent PS4750 is the only model on the market to match MKTs one and only order of PS4750s, from the jacking pads, brake system, roof hatches, etc. Check out the prototypical Ellcon-National Peacock D-1600 hand brake and the Brenco-3 style rotating roller bearing caps!
Canadian National Power In Color Volume 4: Switchers - Stephen M. Timko
RELEASED: February 1, 2022
128 Pages, All Color
Continued coverage of Canadian Nationals motive power fleet with a focus on switchers! General Electric industrial-size units are featured along with the standard fare of Alco/MLW, EMD/GMD, and CLC end-cab units. A handful of Whitcombs are included, as are the GMD/CN-built Sweeps.
HO UAC TurboTrain (DC/DCC/Sound): VIA-CN - 5 Car Set
Car Numbers:125, 200, 255, 227, 153
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model.
HO Gunderson 6089 50ft High Cube Box Car, Cotton Belt
St. Louis Southwestern (SSW) Cotton Belt B-70-42 Repaint 1984+ offers an accurate 1980s era repainted scheme. In 1984, the SP/SSW was busy renumbering some of the SSWs B-70-42 boxcars into the 59000 series. Their new paint jobs stood out with a smaller but distinctive yellow CUSHION-CAR graphic on the left with the familiar COTTON BELT bold graphics to the right. Sharp-eyed fans will note the sans-serif reporting marks and data ? this is accurate for this era of SSW B-70-42 repaints. This Cotton Belt repaint scheme features Morton crossover platforms, an Ajax handbrake and separately installed body-brake style truck brake beams. We have also applied the 3rd Arm door hardware along the top door tracks to match the prototype. The accurate black 70-ton Birdsboro foundry Barber S-2 trucks have rotating Timken roller bearing caps.
Product: Gunderson 6089 50ft High Cube Boxcar
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Birdsboro foundry Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 33in Wheels
HO Dash 9-44CW - DCC/Sound - KCS #4404
KCS FEATURES:
- Unique art per road number
- Clean patched areas where former BNSF logos resided
- K3LA Horn
ROAD NUMBER SPECIFIC FEATURES:
#4404
- Silver replacement horn
- faded stripes on the engine compartment
#4430
- PTC antennas
- replacement air conditioner from a Santa Fe Superfleet unit
DASH 9-44CW SERIES LOCOMOTIVE FEATURES:
- Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
- Etched, see-through walkway steps
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
N Scale Mini Custom Soda Machine Set - Dr. Pepper (2)
Pre-painted and labeled chest and upright soda machine.
HO 50ft 100-Ton 4-Bay Hopper - Conrail #498744
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from mid-1960s to mid-2000s
- Standard car for 1980s and later Powder River unit coal trains serving power plants
- Also used to transport stone and other bulk loads
- Die-cast metal underframe for excellent performance loaded or empty
- Sloped sheet braces & update brake gear
- Correct 36 inch turned metal RP-25 wheels
- Proto MAX(TM) metal knuckle couplers
HO 70 Ton 13 Panel 3-Bay Hopper Car - Pennsylvania (H37B w/ Crown Trucks) #272263
Ready to Run.
Features:
Crisp details and sharp painting and printing,
metal wheels and knuckle couplers
1st time offered with the correct Trucks
Plastruct 91851 Maple Paneling Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
7-1/2 x 10
SB5 Smart Booster - 5-Amp System w/Power Supply
The SB5 series of booster are sold as an UPGRADE path for the Power Cab system and NOT presented as new system. Smart Boosters are a complete stand alone command station and booster in a single box. The command station software in the Smart Booster is basically the same as the Power Cab software and in fact the software revisions between them are the same. Add an SB5 to your Power Cab when you need more track power. The SB5 can supply 5 Amps of track power while freeing up your Power Cab for true walk around control. The SB5 accommodates up to 6 throttles plus an additional 3 cab bus accessories such as AIU, USB or Mini-panels. An internationally approved 12/13.8 volt 5 Amp power supply is included.
DCC Specifications of the SB5:
- Maximum number of cabs (throttles): 6 - Cab Addresses MUST be in the range of 2 through 7 Plus USB, AIU, Mini Panel accessories in address range of 8 through 10
- Maximum number of simultaneous trains: 18
- Functions controlled: 29
- Locomotive address range: 1-127 (short), 0-9999 (long)
- Accessory address range: 1-2044
- Signal address range: 1-2044
- Maximum number of advanced consists: 16 (addresses 112-127)
- Maximum number of old consists: 36 (6 per cab)
- Maximum number of Recalls: 6 per cab
Twin Lamp Post - 3 sets
Use to light street corners, sidewalks, parks, rail yards and more. 20mA/set RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 0.484 in w x 2.76 in h (12.3 mm w x 70.1 mm h)
N Scale S-4 - DCC/Sound - CP Rail #7113
FEATURES:
- Scaled from actual prototype measurements
- 2 cab variations - riveted or welded
- Option for horizontal or vertical radiator shutters
- Fine scale handrails
- Separately-applied coupler cut levers, air hoses, piping, etc.
- Directional LED lighting (includes cab rear headlight)
- Die-cast hood & chassis for improved pulling performance
- Dual-flywheels for maximum performance at all speeds
- Factory-equipped with AccuMate knuckle couplers
- Exceptional painting and printing
- Features ESU LokSound Decoder
N Scale Universal Truck Mount Couplers - Medium T Shank (2 Pairs)
Description
MT-7 Medium (.275inch) T shank coupler conversion. Unassembled
With adaptor; for converting Kato, Con-Cor, AHM and other equipment with split single one-piece draft gear box.
HO EMD GP40 - DCC & Sound - Union Pacific #594
1997+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO 59Ft Cylindrical Hopper - Toronto, Hamilton & Buffalo #1538
(black, white; Bow Tie Logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
One time run of these roadnumbers, order now - limited quantity available
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO EMD FT A+B Set - DC/DCC/Sound - Northern Pacific (NP Pine Tree Scheme) #5402A+ 5402B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
Evergreen Scale Models 3025 .025in Opaque White Polystyrene Passenger Car Siding (1sheet)
N Scale 53ft Stoughton Containers - Hub Group, Set #2 (3pk)
MODEL FEATURES:
- Fully assembled
- Magnetically stackable
- Each container individually numbered
- Razor sharp printing and painting
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21212
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14114
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Scale - 1966-77 Chevy C-90 Low Cab Tandem Axle Short Hood Tractor - Unpainted and Resin Cast Kit
RS-18u, DCC & Sound - CP Rail w/Multimark #1832
Era:1980-1998
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
#153 Short 1/4inch Shank
All-metal -whisker- coupler with metal self-centering spring. Designed and tested for reliability, durability and long life. Compatible with Kadee HO couplers. Fits most HO scale equipment; can be used in place of No. 5 coupler.
HO 50ft Ext-Post Hi-Cube Plug Boxcar - CRLE #119719
MODEL FEATURES:
- Separately applied brake wheel and stirrups
- Highly-detailed, injection-molded body
- Metal wheels with RP25 contours operate on all popular brands of track
- Minimum radius: 18 inches
N Scale Long Barrel Ore Hopper - Ontario Northland: Chevron Scheme (6pkg) #2
Road Numbers Include:
6629, 6630, 6633, 6636, 6638, 6639
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
Aerosol Spray Paint Can - Flat Cote Spray - 4.5oz (135mL)
Tru-Color Aerosol Spray Paint is ideal for painting any model when you dont have an airbrush. This solvent-based acrylic paint is great for weathering and wide-are coverage. Available in railroad and weathering colors, Tru-Color spray paint comes in spray cans as well as in liquid colors designed for brush or airbrushing.
Cyclones & Vents for Industrial Buildings - 10 pcs
Cyclones - 2 pcs.
Vents - 8 pcs.
Swivel base allows the vents to remain plum when mounted on a peak roof. This set includes the large cyclone type dust collectors that are mounted on the roofs and walls of many manufacturing plants, along with the vents found in kit #610.
LokSound V5 DCC Direct Sound Decoder
Note - Email what sound file number you want installed into decoder. In the customer comments section at the check out.
ESU 58821 LokSound 5 DCC Direct Sound Decoder- 69mm x 17mm (2.72inch x 0.67inch)
For Gauge: HO
The LokSound V5 DCC Direct fits into most HO scale locomotives.
It will fit many HO scale locos such as:
Atlas
Athearn Genesis & RTR
Broadway Limited
Stewart/Bowser
Intermountain
Rapido
Kato
Full Throttle Decoder Operation for Diesels
It is often challenging to make a scale model perform like it has the mass of a 260,000lb locomotive pulling 5,000 tons or more! Some of this can be done with BEMF - when the loco feels a load, it will automatically rev up to work harder to pull this actual load. But this is often a flawed method in modeling. Today, model train car wheels are so free rolling the cars often do not simulate sufficient drag to replicate a typical prototype situation. Also, often we do not sufficiently weigh our cars to represent a scaled-down version of the prototype.
One of the biggest problems with BEMF controlled load is in our modeling and operations we often simulate loads inside a closed car. The payload inside a prototype car can weigh as much as 100-tons more than the car itself. This is especially important at operating sessions. Empties in and Loads out or vice versa. There is no way for a decoder to know the proposed weight of the cars it is pulling. Our car cards, showing whether a car is loaded or empty, are seen only by the operator, not by our decoders!
To compensate for what the decoder cannot know, we have created Full Throttle decoder features! FT features include Drive Hold, Run 8, Coast, improved Dynamic Brakes and a new Independent Brake feature.
Operating Modes
The V5 decoder supports all DCC programming modes and thanks to RailCom you may read out the CV values on the main, provided you have a command station supporting RailCom. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.
The LokSound 5 decoder supports the Marklin braking sections, ZIMO HLU braking commands or the Lenz ABC system. Braking with DCC brake generators or with DC is also possible. The locomotive with a LokSound 5 decoder will also come to a halt when a Selectrix braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.
The LokSound 5 decoder is suitable for analog DC operation, AC and DCC command control.
Sound
The LokSound V5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and for all practical purposes, one cannot detect any difference to the original. A dual class D audio power amplifier with 3W output power feeds the speakers with a permitted impedance of 4 to 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.
The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail movements. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.
Functions
Subject to the type of interface, every LokSound V5 has at least 10 amplified outputs with multiple lighting functions available. The brightness of each output may be adjusted separately. Loksound 5 decoders with a PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs.
Motor control
The LokSound V5 DCC decoder supplies up to 1.5A motor current and motor control has been improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz results in silent operation, particularly for coreless motors making motor hum a thing of the past. Load control can now be adjusted with up to 10 separate CVs and will manage even the most difficult motor control issues. The unique Auto-Tune function facilitates the automatic calibration of the decoder to perfectly match the motor.
AK Interactive Wash : Track wash
HO EMD GP7 - DCC & Sound - Undecorated Non-Dynamic - Phase II
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
UNDEC FEATURES:
Optional parts include...
Dual Leslie A-200s or single S3L horn
Winterization hatch
1200 and 1600 gallon fuel tanks
Speed recorder
Foot boards
Dual MU receptacles
-Nail-, -Firecracker-, and Sinclair -Ice Skate- antennas
In 1949 EMD unveiled the GP7, a general-purpose road-switcher that was suitable for a variety of tasks on the railroad. The GP7 went through several production variations, known as -phases- by railroad enthusiasts. -Phase II- units were typified by the addition of a box on the walkways on the firemans side, as well as the (optional) addition of dynamic brakes. This undecorated release is a good option for do-it-yourself modelers or freelancers, and comes with a selection of common, optional detail parts as well.
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO Dash 8-40CM - DCC & Sound - BC Rail: R/W/B w/ Frame Stripe #4612
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
4785 PS2-CD Covered Hopper - Early End Frame - Penn Central - Green Repaint #886859
All Scale Classic Trees - Ready Made - Waters Edge 3-4inch (3 pkg)
3 to 4inch, 7.6 to 10.1cm Tall
Product Information
Make Realistic Scenery in Minutes
Give your layout a change of scenery with Woodland Classic Trees from Woodland Scenics. Fully assembled and ideal for foreground detail, the selection includes several types of trees along with hedgerows. The models are finely detailed with painted, flexible trunks and foliage with natural contrast to enhance any layout or diorama. A unique planting pin and detachable base allow for temporary placement, or ease of removal for cleaning and maintenance. Easily mixed and matched to capture the variety found in nature, trees range from 3/4 to 9inch tall, making them ideal for modelers in all popular scales.
HO Lake Forest Cottage with Accessories - Kit
FEATURES:
- Perfect for steam or diesel-era layouts
- Traditional wooden design
- Walls and trim molded in two realistic colors as one complete part
- Makes a great summer cottage, modest suburban home of company house
- Simple assembly with minimal gluing
- Includes LED interior light
- Easy-to-build plastic kit requires minimal gluing
- Includes trellis, table, umbrellas, hedges, window boxes and chairs
- Printed interior window treatments
- Molded in five realistic colors and clear window glazing
MEASUREMENTS:
4-3/4 x 2-3/4 x 3-1/2 inches
HO2/HO3 Knurled Brass Roller for Tracking Cleaning Car
Tangent Scale Models Delivery 1969 - Gunderson 6089 50ft BoxCar D&RGW
Denver & Rio Grande (D&RGW) Delivery 1969 is an exciting release for us. The distinctive D&RGW Grande Gold orange paint coupled with black ends and carefully added roof overspray makes a model that is simply stunning. The prototype Rio Grande graphics were carefully fitted to the available 7 panels of space to the right of the doors. The white paint at the tops of the ends reminds you that this is a high-cube car. The Rio Grande cars feature truck mounted brake details, faithfully replicated with accurate truck-mounted brake beam details and no body-mounted brake cylinder on the Hydra-Cushion underframe. The Tangent D&RGW model also features accurate unpainted Morton style crossover platforms, early 5-board large tack boards on the sides and ends and an Ajax handbrake. Don?t forget to check out those accurate Hyatt rotating roller bearing caps on the 70-ton Birdsboro foundry Barber S-2 trucks!
Product: Gunderson 6089 50ft High Cube Boxcar
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Birdsboro foundry Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 33in Wheels
EMD GP9 Phase II, High Short Hood - Standard DC - Soo Line #414
(white, red, black)
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today.
Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21-pin DCC plug
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
Based on units in service from the 1960s to 1980s with:
Leslie S-2M and single chime air horns
Firecracker radio antenna
Working Pyle-National beacon
Short-hood forward operation
Pyle late dual sealed beam headlights
Super non-lifting type spark arrestors
Winterization hatch
HO 40Ft Fruehauf Exterior-Post Volume Van - Penn Central #201247
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
Flexible Vinyl Stone Trim & Abutments - Large
Use w/#214-8268, sold separately
Product Information
Add realistic detail to HO structures with this set of Stone Trim and Abutments from Chooch Enterprises. Molded in flexible vinyl thats easy to cut with scissors or hobby knife, they can be finished with acrylic paints (sold separately) for added realism.
HO GMD SD40-2 - DCC & Sound - Ontario Northland #1731
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO SD70ACe - DCC/Sound - Progress Rail #4843
PRLX FEATURES:
- Ex CSX units
- Cab high mount headlight
- Nose door without window
- Rear ladder located conductor side
#4831:
- Inverter cabinet with solid X-panel compartment
#4843:
- Inverter cabinet with X-panel compartment and vertical grille
FEATURES:
- New for the SD70ACe, LED lighting
- Correctly-sized illuminated ditch lights (front only)
- Snowplow
- Front and rear trainline air hose with silver tips
- Multiple unit (MU) hoses with silver tips
- Coupler cut bars
- Train line air hoses
- Flat or tapered front and rear anticlimbers
- Safety tread on the walkways
- Nose or cab mounted headlight
- Standard or isolated cab
- Windshield wipers
- Tinted side windows
- Mirrors
- Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
- Airchime K5LLA horn with square or tube style mounting bracket
- GPS Domes or PTC antennas per prototype
- Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
- See-through radiator fans
- Etched dynamic brake grille and screen with appropriate grid detail underneath
- Dynamic brake louver variations per prototype
- Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
- Early or late hand brake housing and wheel
- Early or Late Sander Brackets
- Factory installed wire grab irons
- Jacking pads per prototype
- Plumbing alongside the frame appropriate to the specific railroad and purchase order
- Fuel tanks with single or dual fuel fillers
- HTCR or HTSC trucks per prototype
- Non-sound QuickPlug equipped with NEM 21-pin DCC plug
- McHenry scale knuckle spring couplers
- Minimum radius: 18in
- Recommended radius: 22in
SOUND EQUIPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
HO Canadian National - SD70I Diesels (1997+) - Waterslide Decals
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15246
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO GMD-1 - DC/Silent - Canadian National (1900s Noodle w/ Red Cab) #1907
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
HO Scale Ground Mast Assembly
This mast and ladder assembly can be used with your choice of our signal head kits to create many different RR signal configurations. The etched fret contains optional parts for creating unique signal builds.
N Scale Flexi Flo Hopper (Late) - PC/CR Scale Test Cars - 2-pack
Road Numbers Include:
#80019
#80027
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO FMC 60ft DD/SS Hi-Cube Boxcar - Norfolk Southern #620019
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
MODEL FEATURES:
- Double 8 foot Youngstown doors
- Photo-etched coupler cross-over platform
- Separately applied grab irons, end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for trouble-free operation
- Body-mounted McHenry operating scale knuckle couplers
- 70 or -100 ton roller bearing trucks with 33 or 36 inch wheels per prototype
- Machined metal wheels with RP25 contours
- Minimum radius: 18 inches
N 4-6-6-4 Steam Challenger - DCC & Sound - Union Pacific (TTG) #3976
ETA: October 2022
Detailed Information
Union Pacific
In the spring of 1941 UP locomotive designers began working on a locomotive to team up with the new 4-8-8-4 Big Boys then under construction at Alco. The Big Boys were designed to pull heavy freights up the Wasatch Range in Utah to the division point at Green River, WY. What was needed was a locomotive to take over at that point that could speed the freights eastward across the Wyoming Division. Building on their experience with the original CSA 4-6-6-4 Challengers UP and Alcos designers developed a newer and better Challenger type locomotive. The result was a group of 65 4-6-6-4 Challenger built in three separate groups during World War II.
ROAD NUMBER SPECIFIC FEATURES:
#3985
Modern Excursion version
Oil Burner
Era 1980s - 2000s
#3933
Coal Burner
Dual smoke stack
Tender bunker coal extensions
Era 1940s - 1959
#3967
Coal Burner
Dual smoke stack
Smoke Lifters
Era 1940s - 1959
#3997
Coal Burner
Dual smoke stack
Tender bunker coal extensions
Era 1940s - 1959
Union Pacific
UP painted several of their Challengers in their two-tone grey paint scheme for passenger service. They also added smoke lifters and converted many to oil burners as well.
ROAD NUMBER SPECIFIC FEATURES:
#3976
Two-tone grey w/ yellow lettering and striping. Oil burner
Dual smoke stack. Era: Late 1940s - Mid-1950s.
STEAM LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Full cab interior with boiler backhead with printed gauges
Individually applied piping, valves, generators, etc.
Operating eccentric cranks on both sides operating in correct direction
Headlights and indicator number boxes (number boards) with directional light change
Five pole, skewed armature motor with flywheel for smooth operation
Pivoting front and rear engines for negotiating 11inch radius curves
See-through running boards
See-through cab windows
McHenry scale knuckle couplers
LED Lighting for realistic appearance
Fully-assembled and ready-to-run
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum recommended radius: 15inch
SOUND EQUIPPED MODELS ALSO FEATURE
Tender-mounted DCC decoder with SoundTraxx Tsunami2 sound
Sound, units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, whistle, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
4mm Static Grass - Summer Grass (20g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. Mixing various lengths and colours of grasses can produce highly realistic textures and effects.
Cut Stone - Double Track
Tunnel Portals are high density Hydrocal castings that are easy to stain with Earth Color Liquid Pigments. Hydrocal is a product of US Gypsum.
HO 57ft Mechanical Reefer - Wisconsin Central #10004
FEATURES:
- One time run of these road numbers, order now - limited quantity available
- Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
- Keystone or Hydra-Cushion underframe detail as appropriate
- Short ladders and low hand brakes
- 9ft Youngstown plug door with separate latch bars
- Authentic Stanray peaked, ribbed roof with capped exhaust stack
- Detailed underbody with brake gear and fuel tanks
- 70-ton roller bearing trucks
- Correct 33 inch RP-25 turned-metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
BH1 Tsunami 2 Sound Decoder - EMD Diesel
Dimensions: 97 x 16 x 7.7mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 8 LED-Friendly Outputs!
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
Get an easy upgrade for your Bachmann Sound Value diesel models with our newest Tsunami2 decoder! The TSU-BH1 offers 8 LED-friendly function outputs so resistors are not required for LEDs! (See the wiring diagrams under product documentation for more information). Light effects are fully remappable and offer full access to our 20+ HyperLight effects.
This decoder is available in 3 sound profiles EMD, GE, and ALCO. For an easy install, simply replace the Sound Value decoder and enjoy all of the Tsunami2 features you love!
This decoder is designed to replace the factory board in the following Bachmann Sound Value Diesel Models: FA-2, FB-2, S-4, E7-A, SD70ACe, ES44AC, GP30, GP38-2, GP40, GP7, and SD40-2.
Fun Tsunami2 features including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and more. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+), couplers, and more!
This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.
HO EMD GP40R - DCC Ready - Canadian National (Ex-IC) #3106
2012+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Farm Horses 6 pcs
Set includes five adult sturdy work horses and one foal in various poses.
Diesel Locomotive Rubber MU & Brake Hose Set - 16 Pieces
Fine Red Sable Brush - Size 0
HO Scale Bus Bench - 4pkg
Laser Cut with decals
Western Coal Flood Loader - Kit
32 x 4-1/2 x 16 81.3 x 11.4 x 40.6cm - Conveyor Sections; 7-1/16inch 18cm Ea
The basic building includes a variety of roof-top machinery that puts realistic detail in this highly visible location. Modular conveyor sections can be arranged in a variety of ways, or combined with other buildings like the New River Mining Company, (933-3017) or Glacier Gravel (933-3062) to model a complete scene. And, the stackable silo sections allow you to easily build a tall or short structure that can fit where overhead clearance may be limited.
1 Inch Sanding Stick Cloth Back - Paper Sanding Strip Assortment (refill for 795-37752)
Includes 2 Each #37765, 37766, 37767, 37768 & 37769
HO Figures - City People (6)
Populate your layout with miniature figures from all walks of life!
Gas Station Parking Lot Kit
With its unique design that works like sectional track, this Cornerstone kit makes it easy to build a detailed parking lot big or small on your HO layout. Molded cut lines on the back simplify cutting and fitting if needed, and separate gutters, entrance ramp and corner pieces are provided for the finishing touch. The realistic concrete color and surface can be used with Cornerstone Street System sets (each sold separately), and these parts are identical to the Parking Lot sections included with the Modern Travel Center (933-3538), Modern Gas Station (933-3537), and can also be used with the Modern Gas Station Car Wash (933-3539), each sold separately) for easy expansion.
Set of 2 sections; Each: 10-7/16 x 5-1/4 In 26.6 x 13.3cm
HO 12Ft FMC 5327 Plug Door Box - BAYL #90255
All new tooling with accurate dimensions
Photo-etched cross-over platform
Separately applied grab irons, end ladders and brake wheel
33in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
All models are representative of prototypical paint schemes
Minimum radius: 18in
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of ?In Service? equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
PROTOTYPE AND BACKGROUND INFO:
It was the mid 1970s, and the incentive per diem box car boom was just beginning. New, brightly painted box cars seemed to appear overnight. Many were lettered for various short lines. FMC (Food Machinery Corporation) was a significant builder of many of these cars. The 50? outside post, non-terminating end box car, became the foundation for new per diem cars built in the 1970s. The 50? FMC cars also varied in door configuration and style to better suit each customer. These models can still be seen today in the modern railroading scene.
HO - ACF 5250 CF Hopper - Rock Island #13979
HO Greenville 86Ft Double Plug Door Box Car - Norfolk & Western (Delivery 1-1978) #861294
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Norfolk & Western (NW) -Delivery 1978- replicates another major player in the world of Greenville 86Ft Boxcars. The NW rostered several Greenville series, but the 1978 order was the biggest. In fact, this 1978 B-138 class of 317 cars was the biggest Greenville order of any railroad. The bold NW graphics are almost understated on a boxcar of this size, but this paint scheme is one example that literally defines modern auto parts trains. The NW cars feature the correct late-Greenville body with 5 grab irons on each side along with body mounted brake gear. Those gorgeous 100-Ton -Low Profile- Barber S-2-C trucks show off the accurate rotating Timken bearing caps. SKUs -01 through -06 have January 1978 data and SLUs -07 through -12 have February 1978 data.
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Erie Lackawanna
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Tru Color Paint 080 - Acrylic - Imitation Aluminum - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX #16203
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
20 Amp Power Supply 13.8-23 VDC
Plant No. 4 (Front Wall) 6 x 2-1/4 x 7-1/2 inches 15 x 5.6 x 18.7cm
A Great Transition between your Layout Scenery and Background Scenes
Finally! There is a quick, affordable way to add scenery anywhere space is limited - without the added time and trouble of kitbashing!
Background Building Walls let you use that last little bit of space to create a realistic background for any industrial area. These HO Scale kits can be used on the edge of your benchwork, along a shelf or modular layout and in dioramas. Once installed, they provide a smooth, realistic transition between 3-D foreground scenes and printed or painted backgrounds. (Check out Walthers Instant Horizons printed backgrounds for more ideas on creating a backdrop for your layout.)
Based on popular Cornerstone Series(R) structures, you can build them stock or easily customize them. Each has scribed cut lines molded on the inside so you can cut new angles or reduce the width to fit your pike. Each building also comes with a variety of add-on details, a partial roof and colorful sign decals
HO - F150 Bed Tool Box (2 per package)
HO EMD GP40 - DCC Ready - Western Pacific (Zephyr) #3507
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO EMD SW9 - DC/ Silent - Canadian National (CN Black Scheme) #7000
Photo says: Model will include various detail parts to modernize appearance
Preliminary artwork and drawings. Subject to changes or revisions before production
Canadian National:
Delivered in 1952 / GMDD
CN style spark arrestors (in polybag)
Large barrel style headlight
Frame mounted side handrails
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO EMD FT A+B Set - DC/Silent - AT&SF (Passenger Scheme) #158L + 158A
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO FM H16-44, Standard DC, Canadian Pacific: Action Red Scheme No.8715
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
1951 Hudson Hornet 2 Door Coupe- Unpainted and Resin Cast Kit
HO 70-Ton 12-Panel Hopper - Pennsylvania (H39 Arched Ends) #274001
Blt.7-58
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO E-Z Riders with Ball Bearing Rollers (HO/On30 Scale
4 per pack
designed for use with HO and On30 locomotive drivers (can also be used for non-drive wheels)
full electrical pickup
perfect for workbench testing
work with 6 axles loco too
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) #653135
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
GP15-1 - DCC & Sound - Chicago North Western No.4405
In the mid-1970s EMD developed the new GP15-1 model in an
effort to offer their customers a replacement for their medium sized
road switchers which were wearing out. Many railroads (i.e. ATSF,
SP & ICG) were rebuilding their older road switchers and EMD
wanted to offer them a different option. Unfortunately there were not
a lot of takers and only 310 units were built for US railroads. This
small 1,500 horsepower unit came with a radiator intake section
similar in appearance to the special one that EMD was using on
the larger SD40/45T-2 models being produced for the Rio Grande
and Southern Pacific to alleviate overheating issues in their many
tunnels. Railfans dubbed these lager units Tunnel Motors which
led to the smaller GP15-1s receiving the moniker -Baby Tunnel
motors.- Many GP15-1s remain in service today for major Class 1
railroads, regional railroads and shortlines.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED bulbs for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
CNW purchased 25 GP15-1s in 1976 to supplement their collection of used and original road switcher fleet. They could be found in local service in the Chicago area and other upper Midwest points on the CNW system. By the time of the UP merger in 1995 there were only 10 of them left in service.
CNW FEATURES:
Nose mounted Gong style bell
Nose Gyralight
1990s Traditional yellow paint scheme
ATS shoes
Separate Switch Broom included
Operating beacon
ROAD NUMBER SPECIFIC FEATURES:
No.4405
Operation Lifesaver paint scheme
No.4410
Operation Lifesaver paint scheme
No.4409
1990s Traditional yellow paint scheme
N Scale Split-Level House - Kit
DIMENSIONS:
4 x 2-1/4 x 1-1/2 inches (10.2 x 5.7 x 3.8cm)
N Scale home-buyers will love this all-American Split-Level House from Cornerstone! Designed for easy construction with plenty of included details, features of this detailed home include:
- All-new model of an American icon!
- Must-have home fits the mid-1950s to the present
- Typical period construction featuring brick and wood siding
- Attached one-car garage and slab-style front porch
- Curbside mailbox, large and small shutters, and brick exterior chimney all included
- Molded in three colors with clear acetate windows
Tru Color Paint 125 - Acrylic -BC Rail Dark Green 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Value Line RTR - 13 Panel Coalporter - CSXT (Gray) #390620
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Evans X72 Box car: Conrail w/ Small Logo - Single Car #229077
Detail Variations:
As operated between 1976 to the 1990s.
6-pack includes the following numbers:
#229077
#229291
#229301
#229398
#229401
#229472
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SSTX #2025
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO SD70M - DCC & Sound - Union Pacific #4477
UP FEATURES:
UP lightning stripe scheme
Early SD70M body
Nathan K-3 horn
Air Dryer
Spare knuckles on rear pilot
Prime air filters
HTCR-II trucks
EMD low plow
Red sill stripe
GPS dome
Small can & Sinclair antennas
-Under Warranty- on cab
Late style fuel tank & breather piping
This release of UP SD70Ms depicts units from the first order, with early (non-flared) SD70M bodies in their as-built appearance. For later-era operations, a consumer-applied GPS dome is included.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO ALCo RS-3 - DCC/Sound - CN (Black) #3039
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Big Sky Blue) #5205
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
N Scale FM H-24-66 Phase 2 Trainmaster - Silver Standard DC - Canadian Pacific (Late) #8917
Features:
Ends with large number boards and a single headlight
Golden-white LEDs
Directional lighting
Painted safety rails
Etched metal grilles
Blackened metal wheels
Factory-installed AccuMate magnetic knuckle couplers
Atlas Master Series Silver Additional Features:
Atlas Silver Sound Ready models are equipped with a speaker for easy conversion to sound with the addition of a decoder.
AccuMate couplers are made under license from AccuRail, Inc
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - PTTX #93477
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO GP40 - Gold DCC & Sound - CSX (MOW) #9720
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
HO 40Ft Boxcar w/ Early Improved Dreadnaught Ends - Great Northern (Chinese Red) #21778
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
HO 70-Ton 12-Panel Hopper - Erie Lackawanna #33685
Blt.3-74
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO Flexible Two-Lane Roadway w/Markings (100 x 8cm)
HO Dash 8-40CM - DCC Ready - BCR: Faded Red/White/Blue #4620 - OVR Exclusive
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
HO SW1000 Switcher - DCC & Sound - BNSF #3617
ETA: June 2023
Detailed Information
BNSF FEATURES:
Roof mounted beacon (Flash function in DCC only)
Fire cracker antenna
MU hoses
Winterization cab window
In the late 1960s CB&Q purchased a small group of EMDs new SW1000 switching locomotive that were incorporated into the new Burlington Northern roster after the 1970 merger. BN then purchased their own SW1000s shortly thereafter. In 1996 that fleet was then absorbed into the BNSF roster while retaining the BN green and white paint scheme. That BN heritage is clearly demonstrated in this Primed For Grime release. Many of the SW1000s retained their green paint up until retirement from the BNSF roster.
SW1000 LOCOMOTIVE NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SW1000 LOCOMOTIVE STANDARD FEATURES:
Lit ground lights
Detailed cab interior
Drop steps unless noted
MU stands
Exhaust stack
Printed numberboards
Fine scale handrails
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Cube Speaker for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Excellent low-speed operation
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
N Scale Modern Coaling Tower - Kit
Product Information
-Authentic Concrete Design
-Serves Three Tracks
-Coal Delivery Shed
-Loaded with Separate Details
-Decal Signs Included
As larger engines entered service, many railroads found their older coaling towers couldnt handle the increased demand. By the 1920s, railroads began contracting with outside firms to build new coaling towers. Concrete was the material of choice as it was easy to use, affordable, fireproof and weatherproof.
Based on an Ogle design, the Modern Coaling Tower will be a focal point in any engine terminal. And towers like this were also built on the mainline to refuel engines on the road. The model features realistic -concrete- walls plus detailed chutes and mechanisms. Like the prototype, it can serve three tracks at once, making it an ideal choice for maximizing service in minimum space. The same sturdy construction that made these towers appealing to railroads also made them hard to get rid of! With its metal parts removed for scrap, the tower could still be standing in a contemporary scene, a reminder of how things used to be.
Nano LED 2pk - Just Plug Lighting System - Blue
Small in size, big in brightness. Ready to plug into Light Hub, sold separately. Simulates individual bulb. 30AWG gauge wire. Two lights with 24in 60.9cm wire lead and plug.
Kit - 2 Large Roll-Off, 2 Medium Roll-Off, 4 Scrap Metal Slide-Off
CurrentKeeper
DIMENSIONS:
40 x 6 x 11mm
The SoundTraxx CurrentKeeper is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup or dead frogs to ensure reliable operation of any locomotive in your fleet.
HO SD70ACU - DCC & Sound - Norfolk Southern #7242
ETA: October 2023
Detailed Information:
NS FEATURES:
Nathan 5-chime horn
Large plow
Alternating flash ditch lights on both ends (Function in DCC)
In 2016, NS started an ambitious rebuild using ex UP SD9043MACs as cores. The rebuild included upgraded computers and electronic brakes, engine and main generator overall, and new EMD cab. NS designated them as SD70ACUs.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
.080in Opaque White Polystyrene Corrugated Siding (1 Sheet)
.040in (1.0mm) THICK X .080in (2.0mm) GROOVE SPACING, .027in (.68mm) RIB WIDTH
6in x 12in SHEET
Self Adhesive Wild Meadow Grass Tufts - 6mm (100pkg)
These handy packs contain 100 self adhesive ready made tufts, to stick down wherever required on your layout or diorama.
HO Scale G2 AC4400CW - DCC & Sound - Chicago & North Western #8831
CNW FEATURES:
Holden K5H Horn
Early body features
Desk style control stand
Fuel tank without notch
Unevenly spaced rear grab irons
Front ditch lights
Fuel tank bolted to the frame
Low number boards
Extended range dynamic brakes
Lipped exhaust tub
As delivered Antenna package
GE Hi-Adhesion trucks
Inside struts on all truck sides
Central air intake in forward position
An earlier purchaser of the AC4400CW, the units purchased by Chicago & Northwestern were again dressed in the attractive -Lighting Stripe- paint scheme, but now with the addition of an Operation Lifesaver decoration on the long hood. The AC traction paired well with the long heavy coal trains CNW was pulling out of the Powder River Basin. Many of these units lasted well after the UP acquisition of CNW in their original paint or with minor patching. These early versions rode on the first iteration of the Hi-Adhesion trucks with struts on all four corners of each trucks that were both shorter and inboard of the brake cylinders compared to later variations.
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO Custom Black Crates of Fireworks (4pk)
Painted and labeled cast metal crates with vintage fireworks labels.
HO AutoFlood III RD Coal Hopper - PGNX #1196
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO Scale G2 SD90MAC Diesel - DCC Ready - Norfolk Southern #7287
Detailed Information
NS FEATURES:
Primed for Grime
Patches match prototype deletion of UP reporting marks
Different patch shapes, paint color, & slogans per road number
Former UP units; major spotting details remain the same
EOTD above left rear of fuel tank
This group consisted of 110 second-hand units in total, 100 coming from UP and 10 from CEFX. Purchased with rebuilding into SD70ACus in mind, but were used in service as-is for a time before being rebuilt.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
HO Scale Cast -Dayton- Type Wheel Set
Truck not included
Pewter cast 22.5inch wheel set of -Dayton- type wheels
HO - 89ft Thrall Bi-Level Auto Carrier - Ready To Run - Norfolk Southern
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6inch (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
Factory-installed grab irons
Separately-applied ladders and brake equipment
Ultra-smooth rolling metal axles with 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24inch radius is recommended for operation.
HO ACF 3-Bay Cylindrical Hopper - Potacan #789
PROTOTYPE INFORMATION:
Introduced in 1961 by ACF to haul sand, clay, salt, grain and bulk plastics, the Cylindrical Hopper was the first commercially successful
tank-type covered hopper car design. A few of the more than 4,000 cars of this type built through 1966 can still be seen in service today across the United States.
MASTER MODEL FEATURES:
See-through roof walks
Blackened metal wheels
Free-rolling 100-ton trucks
Detailed brake gear
AccuMate couplers
Fine painting and printing
Power Supply - 12V
This is an alternate power supply for use with either the #22-018-1 Power Pack SX or #22-019 Smart Device Controller.
Outputs DC13.5V - 2.2A
HO Lightweight Coach - BC Rail - #156520 / Capilano
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
The Woodland Double-Decker Trailer, part of the Built-&-Ready Landmark Structures line, is perfect for taking your layout to the next level. This trailer features a picnic table, additional level for extra living space, a window air-conditioning unit, TV antenna and an unattached trashcan for custom placement. The Double-Decker Trailer comes with a printed interior and installed LED lights designed for use with the Just Plug(R) Lighting System.
4-1/2 x 2-1/8 x 2-3/8in
11.4 x 5.39 x 6.03cm
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127459
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO Trinity RAF 53C 5-Unit Spine Car Set - Trailer Train TTAX #555010 (5pkg)
HO H-6-D - DC/Silent - Canadian National Railway (Tilted Wafer) #1328
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - Conrail
#53870
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO C425 PH2 DCC Ready Silver BC Rail
Road number different than picture shows
FEATURES:
C425 Phase 2 models include cab with either horizontal or vertical headlights per the prototype
Models include redesigned AAR style truck sideframes with separate brake cylinders and separate bearing cap detail (included when appropriate per the prototype).
Directional lighting w/ golden-white LEDs
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Factory-equipped with AccuMate knuckle couplers
Analog version features NMRA 8 pin plug for DCC
Separately-applied wire grab irons, ladders, and drop steps
Separately-applied marker lenses
Improved painting and printing w/painted handrails
Two painted crew members
Analog (DC) Operation
The LokSound Select Dual-Mode decoder allows your Atlas Gold Series locomotive to be used on DC as well as on DCC layouts.
Please note that the Atlas Quantum Engineer will NOT operate an Atlas Gold Series locomotive equipped with a LokSound Select decoder on an analog (DC) layout. However, the sound and lighting functions of the LokSound Select decoder in the Atlas Gold Series C424/425 locomotive can be controlled by an easy-to-use basic DCC system
Also note that on a DC-powered layout, a DCC and sound equipped locomotive (such as the Atlas Gold Series C424/425) CANNOT be consisted with another locomotive that does not also have both DCC and sound. (This statement does NOT apply to DCC-equipped locomotives operating on a DCC layout.)
Sound Functionality
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
HO Slab-Side Covered Hopper - Toronto, Hamilton & Buffalo TH&B #2841
8 Hatch
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
Single-Axle Day Cab GMC 620 Tractor - Unpainted and Resin Cast Kit
HO RTR 45Ft Fruehauf Z-Van Trailer - Southern Pacific #250111
Detailed Information
MODEL FEATURES:
Separately applied mud flaps
Rubber tires
Fully-assembled and ready to use out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Intermountain - N 4750 3 Bay Hopper - CN/ Chicago Central
Coupler Type Intermountain Magnetic Knuckle
Wheel Type Chemically Blackened Metal
Wheel Profile Small Flange (Low Profile)
HO Bridge Shoes (8pcs)
Made from white metal.
HO Union X-3 Tankcar - UTLX (1930s Paint) #32167
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
HO Alphabets - Railroad Roman - Black - Waterslide Decals
Equipment Type: Railroad Roman - Standard - Black
Description: (formerly 87-69-2) Alphabets - Railroad Roman - Black - Waterslide Decal - HO Scale
HO USRA Single-Sheathed Boxcar: D&H
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Modern Yard Tractor - Norfolk Southern (SP) #26
Completely assembled
Many separately applied parts
Interior details
Rubber tires
Photo-etched steps and rear deck
Adjustable 5th wheel height
Clear window glazing
As seen in intermodal yards around the country
PROTOTYPE AND BACKGROUND INFO:
A terminal tractor, also known as a yard tractor, is a kind of semi-tractor intended to move semi-trailers within a cargo yard, warehouse facility, or intermodal facility, much like a switcher locomotive is used to position railcars.
Tap 00-90 and Drills #62 & #56
Hand Tap and Drill Set made from High Speed Steel. Hand Taps are the versatile, and are popular for use in taping holes for the hobby industry and general tapping. Bottoming Taps are useful for threading blind holes. A bottoming tap has almost no taper at the end because it is designed to thread all the way to the bottom of its reach.
The #1059 Tap and Drill Set is used for installing 00-90 screws.
Package Includes:
(1) 00-90 Tap (bottoming style)
(1) #62 Tap Drill
(1) #56 Clearance Drill
WARNING: Cutting tools may shatter when broken. An approved form of eye protection is strongly recommended.
Maxi I Well Car - 40 Ft- 5 Car Set - Early - K Line/ Rail Bridge #1005
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched walkways
Separately applied brake piping and trainline hoses
Fine ladder detail
Delicate cross-bracing on the floor
Weighted for optimum performance
Razor sharp painting and printing
Prototypically correct 33 In and 38 In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry lower shelf operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18 In
HO Scale Gas Station Accessories
This kit includes 2 globe gas pumps, an oil rack, a trash can, one large sign and 2 small signs. Instructions and decals included.
The Rapido HO Scale F7B and F9B feature:
Designed from original GMD blueprints and field measurements
The only 100% accurate GMD-built F7B and F9B locomotives – This is not a stand-in
Road-number and era-specific details applied at the factory
Steam generator or no steam generator panel as appropriate
Correct bodyside grilles as appropriate
Correct end details including unique CN steam generator end louvers
Backup light in correct location for CN or CP
Unmatched underbody details including air piping
Operational backup light (DCC)
Drive system designed for silky-smooth slow-speed operation
Metal Macdonald-Cartier Knuckle Couplers
DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings
Several road numbers per paint scheme
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
HO 45ft Smooth Side Trailer - Red
MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- Red and white conspicuity stripes
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
HO EMD F7B Locomotive - DCC & Sound - Wabash #1108B
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.02 (10pcs pkg)
N Scale 40Ft Standard Height Container - United Arab Shipping Co (UACU) Set #1 (2pkg)
FEATURES:
Separately applied door rods and handles
Optional separate vents
Prototypically accurate -beveled- all corrugated sides
Each set comes as a 2-pack
RibbonRail 5inch Track Alignment Gauges - 28inch Curved HO Gauge
Slide between rails to correctly gauge rails. Helps in laying, spiking and joining rail. Precision machined to NMRA standards. Works in all code size track. Total Length 5inch.
Shipped from Ontario Canada.
HO SD70M - DCC Ready - Union Pacific #4477
UP FEATURES:
UP lightning stripe scheme
Early SD70M body
Nathan K-3 horn
Air Dryer
Spare knuckles on rear pilot
Prime air filters
HTCR-II trucks
EMD low plow
Red sill stripe
GPS dome
Small can & Sinclair antennas
-Under Warranty- on cab
Late style fuel tank & breather piping
This release of UP SD70Ms depicts units from the first order, with early (non-flared) SD70M bodies in their as-built appearance. For later-era operations, a consumer-applied GPS dome is included.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
CP #6258
Expected in February 2021
LOCOMOTIVE FEATURES:
Brand new model
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
EMD SD60M WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Rubber MU hoses for durability
All New Tooling
New HTC trucks feature animated spinning roller bearing caps
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
CP FEATURES:
Illuminated front and rear number boards
Illuminated front and rear added ditchlights
Split dynamic brake acess door
Winterization hatch
Large window nose door – high or low window position based on prototype
Large sand fill hatches on the nose
Standard nose bevel
SOO style rear knuckle brackets
HO GP40-2 - DCC Ready - DT&I #422
Detailed Information
DTI FEATURES:
Last DT&I scheme
Nose-mounted bell
Xenon beacon (effect in DCC)
M3 horn
Extra nose grab irons
Front plow
Firecracker antenna
Non-dynamic brake hatch
Extra jacking pads
Llit class lights and number boards (effect in DCC)
DT&Is last locomotive order was for GP40-2s #422-425 in late 1979. Painted in their new bright -star- logo, they were built for high-speed TOFC service. Notable DT&I options included: Xenon beacon, nose mounted bell, and non-dynamic brake hatch. GP40-2 #407 was part of the original order from 1972. After being repaired from a wreck in 1979, it was repainted into the new -star- scheme and put back into service.
ROAD NUMBER SPECIFIC FEATURES:
#407
Repainted after wreck
chickenwire grilles
small EMD plow
orange bell
small front anticlimber
#422
Last DT&I locomotive order; corrugated grilles
newly tooled xenon beacon with bracket
large EMD plow
silver bell
large front anticlimber
#424
Last DT&I locomotive order; corrugated grilles
newly tooled xenon beacon with bracket
large EMD plow
silver bell
large front anticlimber
GP40-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.06 (10pcs pkg)
60Ft PS-1 Boxcar - Grand Trunk Western - BCR #383505
Beginning in the 1960s, automakers approached rail carriers with the desire for larger freight cars to transport auto parts from suppliers to manufacturing centers. In response, the 60Ft auto parts boxcar was introduced. Carrying a wide variety of auto components including engine blocks, transmissions, brake drums, and others, these cars were a fixture throughout North America for the next four decades and can still be found in service today. Often times, entire trains of auto parts and related cars could be seen near major production facilities as automakers switched to just-in-time delivery methods, requiring prompt deliveries from the railroads providing service. It was common to see trains consisting of 50Ft, 60Ft, and 86Ft boxcars, specially modified flat cars to carry lightweight chassis, and autoracks all destined for one auto or truck manufacturing facility. As the auto industry supply chains evolved and manufacturing facilities were consolidated, many of the 60Ft boxcars were used in other markets and could be found hauling a variety of goods including appliances, paper goods, cardboard, and similar items.
HO Scale 1951 Windsor Four Door Sedan - Unpainted and Resin Cast Kit
Hollow cast resin kit
Vacuum formed windows
Rubber tires
Poseable steering
Etched stainless mirrors
Includes driver: Bob
Plastruct 90101 O D Butyrate Coated Wire (15 pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
WHITE
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
BUTYRATE COATED WIRE Use for piping industrial, residential, commercial and many other model settings. May also be used as round pylons in bridge, pier and other structures. Ideal for all facets of mo
QUANTITY
Pack of 15
OUTSIDE DIAMETER (O.D.)
3/64
1.2mm
INSIDE DIAMETER (I.D.)
N/A (wire inside)
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Big Sky Blue) - 6pkg
Road Numbers: 5033,5111,5172,5205,5349,5363
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
HO Modern Concrete Highway Overpass - Kit
Product Information
Modernize your HO streets and highways with the Cornerstone Modern Concrete Highway Overpass kit! Packed with authentic detail and designed for easy construction, the prototypes are typically found on routes handling hight-speeds and heavy traffic. Other features include:
Typical of pre-stressed concrete highway overpasses seen all across North America
Fits highway scenes from the 1960s to the present
Round and Square Support Columns included in short and tall styles to clear railroad or highway below
Build as single or double span - easily combine kits (each sold separately) for a larger assembly
Easy to install in new or existing layout scenes
Detailed abutments with molded cut lines for easy customizing
Parts molded in concrete gray
HO 60ft NSC 5150 3-Bay Covered Hopper - Archer-Daniels-Midland (ADMX) #52333
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) (6pkg) #2
1935+
6-Pack includes the following numbers, all individually packaged: #741003, #742975, #743816, #744293, #744405, #745324
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - KRRX 6 Pack
4713, 4718, 4719, 4724, 4732, 4740
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO EMD SD70ACe Diesel - DCC & Sound - Progress Rail (EMDX) #2115
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
PRLX FEATURES:
Late production units with isolated cabs and PTC antennas
Large inverter cabinet grills
Front and rear ditch lights
Due to surplus production line capacity, Progress Rail outshopped several locomotives in the early 2020s (some sources indicate that these units were to be part of a Norfolk Southern order). The two units on offer here are known as -Tier 4 Credit SD70ACes-, and are produced using -banked- credits that are obtained from the production of tier 4 emissions-compliant units.
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Kalmbach Publishing Book -The DCC Guide - Second Edition
Comprehensive guide helps modelers get the most out of DCC. Diagrams and photos show how DCC works, from wiring to installing decoders in locomotives.
1:87 Flxible 53102 Transit Bus: RTD Los Angeles
High Self Adhesive Daffodil Tuft Strips - 4mm (10 strips)
10 4mm high self adhesive daffodil tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.
HO H-6-Style Tender with Wiring Harness - DCC Ready - CNR Painted/ Unlettered
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO Dash 9-44CW - DCC/Sound - Union Pacific #9708
UP FEATURES:
- As-delivered 1994 paint scheme
- Modeler-installed GPS dome included for later-era operations
- Leslie RS3L horn
- Large snowplow
DASH 9-44CW SERIES LOCOMOTIVE FEATURES:
- Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
- Etched, see-through walkway steps
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
HO Wall-Mount Industrial Dust Collectors (3pkg) - Kit
Product Information
Modernize older industries for your contemporary railroad with the Walthers Cornerstone Wall-Mount Industrial Dust Collectors kit. Todays clean air laws require that dust, solvents and particulate matter be trapped before it can blown out of an industry. You will see these big collectors hard at work on the sides of food processing plants, mills, woodworking plants, furniture factories, chemical plants, textile mills, industrial painting operations and businesses that handle or cut paper. Highly detailed, plastic parts make it easy to model the complex curves and piping found on real wall-mount dust collectors.
Three dust collectors with wall-mount supports
Easy-to-build plastic kit
Great detail for industrial buildings
Also includes corrugated-metal railcar loading canopy
HO 1961 Chrysler 300 Convertible - Top Down
(Mardi Gras Red)
Walthers Layout Control System - Single Color LED Fascia Indicator (Green)
Works for HO, N, Z, S, and O Scales
This 21st century approach to turnout control uses servo-based components, and features color-coded plug-and-play wiring to eliminate cutting and soldering. The heart of the system is the fully assembled Switch Machine that has a low current draw and comes with great features including an integrated DCC accessory decoder, as well as user-selectable options for quick and easy customizing.
HO 50ft PS 5277 Cu.Ft. Exterior Post Boxcar - CSX #142821
(ex-RF&P)
FEATURES:
- Laser Sharp Painting and Printing
- 33 inch InterMountain Precision Metal Wheelsets
- Kadee #178 Metal Knuckle Couplers
Date: COTS 5-89
Minimum Radius - 22 inches
Leaf Flakes - Shaker 16oz - Sandstone
HO 73ft 3in Greenville 7,000 Cu.Ft. Wood Chip Hopper - ATSF #165002
One of the lightest loads moved by rail, wood chips require one of the biggest cars and they are easy to add to HO operations with these Walthers Mainline Greenville 7000-cubic Foot Woodchip Hoppers! Back by popular demand, features of these models include:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from early 1970s to the present
- Designed especially for moving woodchips from sawmills to paper mills
- Prototypical interior bracing
- Authentic door latch details
- Detailed brake gear
- Heavy die-cast metal underframe
- 100-ton trucks with correct 36 inch turned metal RP-25 wheels
- Proto MAX(TM) metal knuckle couplers
HO PS-2-4427 High Side Covered Hopper - TLDX Delivery Yellow Lease 3-1967 #6865
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
TLDX Delivery Yellow Lease 3-1967 wears the popular and common version of the TLDX private leasing yellow. The Pullman leasing lettering is simple, with accurate TLDX reporting marks and data. The side placard adds a bit of pop to this scheme, advertising Pullmans Transport Leasing Division to shippers. These TLDX cars were built in 1967, and that translates to earlier Pullman features like square stirrup steps, center sill supports between the bays, solid end running board supports, Miner gravity gates and ribbed-style roof hatches. The model is equipped with 100-ton Barber S-2 trucks with separately applied brake beams along with rotating Timken caps. This relevant lease scheme is perfect for the 1960s-1980s.
HO Straight Sections - 4-1/2 Inches (114mm)(4pk)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes! Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation. Suitable for all types of layouts, whether temporary or permanent. This modular track system features an integrally molded roadbed for realistic appearance. Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
B-100-40 Boxcar: Columbus & Greenville - CAGY - Single Car #269
Detail Variations:
6-pack includes the following numbers:
#260
#266
#267
#269
#270
#272
Our B-100-40 model features the following details:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Genuine Kadee #158 Whisker couplers
Newly tooled trucks with turned metal 36 Inch wheels
Separate door rods and door tracks
Road number specific number patches
Separately applied coupler cut levers
Input Interconnect Board for DS74
FEATURES:
- Input interconnect board for DS74.
- Provides plug and play connectivity for DS74 inputs.
- Supplied with ribbon cable to plug into DS74 10 pin Input header.
- Allows plug-in of up to 4 DSXCP1 fascia controls.
- Direct ribbon cable plug-in header to BD4N detectors.
- 8 pin screw terminal plug for optional wire access to 8 input lines.
Conrail Power In Color Volume 3: #6000-6999 - Stephen M. Timko
By: Stephen M. Timko
Released: October 1, 2018
Volume 3 of the 5 volume series covers Big Blues early six-wheelers--#6000 to 6999. An in-depth look at first and second-generation SDs, RSDs, six-wheeled GEs, and the big Century series from Alco. The work contains over 360 full-color photos of 31 models of the Conrail fleet and a section roster.
Morgan Olson Route Star Van - Police - Crime Scene Investigation
Modernize HO highways in minutes with these new Morgan Olson(R) Route Star Van replicas! Based on the popular delivery vehicles seen from coast-to-cast, these layout-ready models include a wide range of details and colorful printed graphics. Check out these other great features:
Newly tooled officially licensed replica!
Contemporary delivery vans and food truck versions!
Five authentic body styles with correct rear doors
Prototypes seen all across North America serving small businesses & fleet operators
Fully assembled
Full-color graphics
Detailed driving compartment w/interior bulkhead
HO Scale Mud Flaps
Customize your ride with these etched stainless steel details. Enough mud flaps for 4 vehicles and light bars for added visibility are included as well.
Scenery Mortar - Gray Rocks (17-1/2oz)
Self-adhesive putty can be used to create all kinds of scenic formations. Mix one part mortar with one part water, knead into a pasty dough and apply. Stays workable for up to four hours, dries completely in two days.
HO Scale Highway Signs - Regulatory Signs #1 (1948-Present, black, white)
Product Information
Scale signs, printed in color on thin plastic for easy assembly Each set of signs includes scale posts. CAD designed to Federal Specifications for accuracy and authenticity. Great roadside, streetside and trackside details..
Yellow
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Positionable Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
HO ALCo RS-3 - DCC Ready - Ontario Northland #1306
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO F30A 50Ft Flat Car w/Sleeper Van - Norfolk Southern (NS MOW) #62153
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
Rapidos F30 Camp Cars Feature
All-new camp trailer loads in four styles
End railings and platforms
Photetched details
Multiple car numbers per scheme
N Scale Horizon Fleet Dinette - Amtrak Phase III Wide #53504
Super-detailed, as is Tradition
Rapido brings their experience with passenger car models to this long warranted fleet of cars used for intercity travel across America (and even into Canada). The Rapido cars will feature the same great attention to detail youve come to expect, including free-rolling wheels, detailed underbodies, interior lighting and more.
Coach, Dinette and Club Dinette cars available
Full underbody details unique to each car style
Full multi-color interior detail with separate seats
Folding steps or fixed stairs as appropriate
GSI G70 trucks with free-rolling, turned-metal wheelsets
Accurate painting and lettering
Constant interior lighting in DC and DCC
Working marker lights
Separately-applied metal grab irons
HO 19,600 Gallon Tank Car - Tate & Lyle #51202
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Date: BLT 3-98
N Scale ACF Type 27 Riveted 8,000 Gallon Tank Car - Champion Oils / Sterling Fuel #6031
Tru Color Paint - Acrylic - Empire Builder Green - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
HO EMD SW900 - LokSound 5 Sound & DCC - Lehigh Valley #121
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- ESU LokSound 5 sound for DCC and DC layouts
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
Spray Can - NATO Black (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 100-Ton Open Hopper - Southern Pacific #481144
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - TROX #3532
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Scale NSC 73Ft Centerbeam Flatcar - Trailer Train (TTZX) #861276
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
N Scale NSC 5111 50Ft Plug-Door Boxcar - Quebec Gatineau #75130
MASTER MODEL FEATURES:
Bodies: 5111 or 5277 cubic foot styles
Ends: Nine or ten corrugations
Painted safety rails
Doors: 9ft or 10ft plug doors
Side Sills: Deep or shallow sills
Trucks: 70- or 100-ton
HO Waterslide Decals - Cargill 50ft Freight/Tank Cars - Corn Syrup
Digitrax TL1 - Single DCC Function Decoder with Integrated Transponding
Your TL1 can be used as:
1. Function only DCC decoder with transponding
2. Digitrax Transponder
3. Function only DCC decoder without transponding.
Single 125mA (250mA peak) function output for lights or other functions
Function can be turned on/off using F0, F1, F2, F3, or F4
Supports both 2 digit and 4 digit addressing
Programmable from DCC compatible equipment
Configurable Strobe feature lets you simulate flashing lights like FRED, Strobes, Mars Lights, etc.
Compatible with Digitrax DCC Transponding Systems
Approximate size: 0.461 x 0.31 x 0.161 inches (11.7mm x 7.8mm x 4.1mm
Roof Texture - Gray - 8.81 oz (250 g)
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Maine Central - Pine Tree #801
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
Plastruct 90027 ABS I Beam 3/8
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/8″
HEIGHT IN MM
9.5mm
WIDTH IN INCHES
3/16
WIDTH IN MM
4.8mm
THICKNESS IN INCHES
.060
THICKNESSS IN MM
1.5mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
TRADITIONAL ABS I BEAMS Use for horizontal or diagonal members in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or professional
HO Scale GP38 - DCC & Sound - Conrail #7850
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO MIL 3800 Covered Hopper - CP (Delivery Scheme) #382521
They are back, again! The famous Rapido 3800 cu.ft. Cylindrical Hoppers make a triumphant ~THIRD~ return with new road numbers and paint schemes!
FEATURES INCLUDE:
- Round-hatch or Trough-hatch design
- Correct Dofasco S-2 100-ton trucks
- Two body variations with 6- or 11-side panels
- Three brake equipment variations and optional additional air reservoir on NSC cars (if applicable)
- Etched running boards and brake crossover platform
- Factory-installed air pipes and coupler cut levers
- Finely molded plastic walkway supports and end cages
- Full separate air piping and brake equipment details
HO FGE 57Ft Mechanical Reefer - DCC & Sound - UP/ ARMN #992063
Detailed Information
57Ft MECHANICAL REEFER FEATURES:
Available with onboard SoundTraxx sound
Scaled from prototype manufacturers drawings and field measurements
Repaints often vary by road number in the size and style of the reporting marks, car numbers and patch shapes
See-through protective screens on the genset end
Detroit Diesel 2-71 Genset visible inside
End wall corrugation visible inside
Inner refrigerator bulkhead
See through end platforms
Two different exhaust stack types: straight pipe with -flapper- or T-shaped -smokejack- per prototype and era
Full underframe detail including Keystone cushioning, air brake reservoir, control valve, brake cylinder, brake plumbing, and fuel tank
Factory applied end ladders and door closure rods
Trainline hoses with silver ends
Three different coupler cut lever styles per prototype
Body-mounted or truck-mounted brakes per prototype
McHenry operating scale knuckle couplers
100-ton roller bearing trucks with rotating bearing caps
Fully-assembled and ready-to-run
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Machined metal wheels with RP25 contours
Weighted for trouble-free operation
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Sound recorded from actual genset
Sound randomly cycles on and off
Utilizes minimum track power
Raise and lower the volume by adjusting the potentiometer
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14059
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Ford C Box Van - Santa Fe
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Rubber tires
HO Standard Caboose - Specialized RIL Transport #103
MASTER MODEL FEATURES:
Thin endrails
Roofwalk where appropriate
Accurate painting and lettering
Roller-bearing caboose trucks
Window glazing
Metal knuckle couplers
Separate brake cylinder
Open smoke stack
Triple valve and air reservoir
Bells for Diesel Locos (Brass Castings) - Hood/Switcher Unit Style in Bracket
N Scale Andrews Trucks w/o couplers (1pair)
HO White Striping - 1 and 2 Inch Widths - Decals
Description: (formerly 87-124-1) Stripes - 1 and 2 inch widths - White
60ft Pullman-Standard Flatcar - Ready to Run -- Illinois Terminal
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
40ft NP 10000-series boxcar: Northern Pacific 1950 Large Monad Mainstreet Scheme #11743
HO Straight Sections 3-11/16in (94mm)(2/pkg)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes! Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation.
Suitable for all types of layouts, temporary or permanent, this modular track system features an integrally molded roadbed for realistic appearance.
Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
HO Pressureaide Covered Hopper - Archer Daniels Midland (Leaf) #50008
(gray, blue, green, Leaf Logo)
HO RTR 40Ft Offset Ballast Hopper w/Load - ARR (Alaska) #7141
Detailed Information
MODEL FEATURES:
Removable load
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied wire grab irons and brake wheel
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Replacement parts available
Minimum radius: 15inch
Solid nickel silver wheels with RP25 contours operate on all popular brands of track
GP39-2 W/DCC & Sound - D&H/ Guilford #384
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes here at Athearn! We are excited to introduce some new, often requested features, to the GP39-2 and other upcoming Genesis models.
D&H FEATURES:
Former RDG units; major spotting details remain the same
Phase 1 GP39-2
Intake grilles with top rib only
Riveted cab side plates with armrests
Early battery box doors
Large Sinclair antenna
Cab side rain gutters
81 Inch nose w/ ratchet brake
2600 gal fuel tank
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PROTOTYPE SPECIFIC INFORMATION
In the decade between 1974 and 1984 , EMD produced the GP39-2 for seven North American railroads. The basic design followed most four axle road diesel switchers for the time. Borrowing improvements from the GP38-2 and GP40-2 designs, this mid-horsepower road switcher utilized a turbocharged 12-cylinder EMD 645E3 diesel engine for its prime mover. With 4 fewer cylinders, the smaller engine provided a distinctive long hood on the phase II and phase III bodies, where the clean room/engine compartment doors were set back from the cab further than predecessor locomotives.
Sensitivity to fuel economy in the 1970s justified the GP39-2 in the locomotive market. It also laid the ground work for EMD to start exploring locomotive designs that utilize engines with larger piston displacement yet posess fewer cylinders. This approach has become the foundation to modern locomotive technology.
HO PS-2-4427 High Side Covered Hopper - Milwaukee Delivery 3-1967 #97890
Product: Pullman-Standard PS-2CD 4427 ?High Side? Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36″ Wheels
? Milwaukee Road MILW ?Delivery 3-1967? wears the classic yellow and black graphics as applied to this 300-car order from Pullman-Standard in 1967. Tangent?s previous run from 2018 featured Milwaukee?s 1968 order of cars with gravity-pneumatic outlet gates. We have carefully replicated the lettering on every panel, bay and center sill from bold MILWAUKEE ROAD to the tiniest PS lot 9174 stencil number. All of the lettering is present and accurate. These cars feature Miner gravity gates and a PS ribbed-style roof hatch. The model also features 100-ton Barber S-2 trucks with rotating Timken caps. Each SKU number varies with CAPY, liner stencil and related Pullan date information. We hear you Milwaukee Road modelers, and your continued requests for more MILW Tangent covered hoppers in our correct shade of Federal Yellow!
HO SD38 - DCC Ready - CanDo Rail Services #5201
CCGX FEATURES:
CanDo Rail Services is a contracting company based out of Brandon, Manitoba, Canada. They preform track maintenance for large industries, operates as a shortline, and contracts switching services in Ontario, Manitoba, and Alberta Canada.
ROAD NUMBER SPECIFIC FEATURES:
#5201
- Ex: DMIR. Short fuel tank
- triple clasp brakes
- M3 horn
- UP style plows
- all-weather windows
- ditch lights on both ends
- Classified as a SD38AC
#5202
- Ex-BLE. Medium fuel tank
- high-mount truck brakes
- M3 horn
- UP style plows
- all-weather window
- ditch lights on both ends
- Classified as a SD38AC
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO EMD SD40 Diesel - DCC Ready - Western Maryland #7448
ETA: July 2023
Detailed Information
WM FEATURES:
Medium plows on both ends
Bell mounted on left side of long hood
Extra ballast on right side walkway
Early cut levers and handrails
Flexicoil trucks with high brake cylinders
There were 12 of these 3000hp, six-axle units on the WM. The first seven units, 7470-7474 and 7495-7496, were delivered in Speedlettering, with the last five delivered in Circus. The units were equipped with 26L brake gear and brake current limiting on the dynamic brakes. As of the Spring of 1996, all twelve of the ex-WM SD40 units remined in service. All but 4 were working for CSXT. Unit 4618 remained in the Chessie paint scheme, with the WM logo under the cab.
Stakem, Patrick H, and Stakem, Patrick E. -Western Maryland Diesel Locomotives-. TLC Publishing Inc, 1997.
SD40 SERIES LOCOMOTIVE FEATURES:
Bi-directional LED lighting
Coupler Cut Levers
Rubber MU hoses
Exhaust stack
Curved radiator fan grab iron
Fine scale handrails
Photo-etched stainless steel windshield wipers
Separately applied wire grab irons
See-through dynamic brake, radiator fans and cab windows
Frame mounted bell (unless noted)
Detailed 4,000 gallon fuel tank (unless different capacity is noted)
Flexicoil-C trucks with high or low brake cylinders (per prototype)
Separately applied air tanks
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for trouble-free operation
Non-sound version features 21-pin NEM DCC plug
Wheels with RP25 contours operate on all popular brands of track
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch Recommended radius: 22inch
NEW FEATURES:
Newly designed can motor is more powerful and quieter than before
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SD70MAC Diesel, w/ DCC & Sound - CSX #4579
Era: 2016+
EMD SD70MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
First time ever with front and rear Rubber MU hoses, Trainline hoses, Cut levers, and rear Spare
CSX FEATURES:
CSXs latest -Boxcar- scheme. Simplified cab roof antennas. Rear pilot mounted spare knuckles. 4526 and 4547 are ex CSX 725 class and 4577 and 4579 are ex CR 4130 class.
LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PROTOTYPE SPECIFIC INFORMATION
During the early-1990s, EMD teamed-up with German engineering company Siemens to produce a freight locomotive that was capable of providing AC-traction drive currents, and thus providing a high-horsepower rating and lower fuel consumption for railroads which had an ever-increasing demand for saving fuel consumption by using a lesser amount of units to haul most of their trains.
The EMD SD70MAC was first introduced in early 1993, and began production later-on during the same year after numerous tests and improvements were made. Since then, the EMD SD70MAC has been a staple of heavy freight lines across the country.
HO EMD SD10 - DC/Silent - Milwaukee Road #543
Milwaukee Road
- SD10 model designation given by Milwaukee Road for their capital rebuild program of their old SD7s and SD9s
- A first in HO Scale plastic models
- Single fuel tank
Chopped short hood and modified cab
- Later style Horst air intake
- Rotary beacon
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Steam Generator Stack for ALCO RS-1/-3 (Brass Casting) - Unpainted
HO 53ft Stoughton Containers - Hub Group, Set #2 (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Separately applied door closure rods
- Each container individually numbered
- Razor sharp printing and painting
Montreal Commuter Early #1302
The Rapido HO Scale FP7 features:
-Designed from original EMD/GMD blueprints and field measurements
-First ever 100% accurate GMD-built FP7 locomotives - This is not a stand-in
-Road-number and era-specific details applied at the factory
-Phase I grilles or Phase II Farr grilles as appropriate
-Steam generator or no steam generator panel as appropriate
-Correct fuel tank, end door, and other unit-specific details
-Unmatched underbody details including air piping
-Full cab interior
-Operational headlight and operational ditch lights (if appropriate)
-Operational numberboards, class lights and backup light (DCC)
-Drive system designed for silky-smooth slow-speed operation
-Metal Macdonald-Cartier Knuckle Couplers
-DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings
-Several road numbers per paint scheme
Fruit Turf Material - Apples & Oranges
HO 30ft Single-Track Railroad Deck Girder Bridge - Kit
DIMENSIONS:
4-3/16 x 1-3/16inch x 1-3/16 inches (10.6 x 3.0 x 3.0cm)
- One of the most popular railroad bridge designs with unlimited overhead & side clearance for passing trains
- Fits steam-, diesel- and modern-eras
- Available in four common lengths to match prototype practice
- Build with open or ballasted deck
- Perfect as approach spans for bigger Cornerstone and other bridge kits
- Add to new or existing scenery with Single-Track Center Piers (933-4550) and Abutments (933-4551) available separately
- Use with WalthersTrack Code 83 Bridge Track (948-83004 sold separately) plus flexible, sectional and hand-laid track or your own rail
- Detailed plastic parts molded in dark gray
W&LE #79603, #80009, #78476, #78491
MODEL FEATURES:
Wire and plastic handrails, stirrup steps, ladders and underbody details
Separately applied brake gear including brake wheel, air reservoir, and brake cylinder
Bettendorf or roller bearing trucks with 33In machined metal wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers
Painted and printed for realistic decoration
Weighted for trouble-free operation
Interior plastic blister safely holds the model for convenient storage
Window packaging for easy viewing
Fully assembled
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
The development of the hopper car went along with the development of automated handling of such commodities, with automated loading and unloading facilities.
Open hopper cars are used for commodities such as coal, which can suffer exposure with less detrimental effect. Hopper cars have been used by railways worldwide whenever automated cargo handling has been desired.
60Ft PS-1 Boxcar - Rock Island #33937
Beginning in the 1960s, automakers approached rail carriers with the desire for larger freight cars to transport auto parts from suppliers to manufacturing centers. In response, the 60Ft auto parts boxcar was introduced. Carrying a wide variety of auto components including engine blocks, transmissions, brake drums, and others, these cars were a fixture throughout North America for the next four decades and can still be found in service today. Often times, entire trains of auto parts and related cars could be seen near major production facilities as automakers switched to just-in-time delivery methods, requiring prompt deliveries from the railroads providing service. It was common to see trains consisting of 50Ft, 60Ft, and 86Ft boxcars, specially modified flat cars to carry lightweight chassis, and autoracks all destined for one auto or truck manufacturing facility. As the auto industry supply chains evolved and manufacturing facilities were consolidated, many of the 60Ft boxcars were used in other markets and could be found hauling a variety of goods including appliances, paper goods, cardboard, and similar items.
HO Hawker-Siddeley Van - Caboose - Canadian National - International #79286
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
HO 85Ft General American G85 Flatcar - VTTX #300409
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
HO Common Pile Trestle - Build Straight or Curved - Kit
(6 x 2 inches High)
Common wood pile (with round piers driven into the ground on the prototype) trestle found on nearly every railroad in North America. May be built straight or curved. Most parts are pre-cut, and kit includes full-size template and curve templates to aid in assembly. Includes a section of Micro-Engineerings Bridge Flex Trak.
Sisters of Mercy Thrift Store - Kit
Foot print 6 X 4 inches -15 X 10cm
What skid row would be complete without a second hand store? This kit features a rooftop water tank and funky cracked stucco. Included are detailed hydrocal castings, full-color signs, laser-cut doors and windows and complete easy-to-understand assembling, painting and aging instructions.
Cast Hydrocal plaster walls, plastic door & windows and full color paper signs and awnings. Perfect for your business district from the cracked stucco to the rusty tin staircase, this building is just brimming with character. This kit features detailed Hydrocal castings, plastic doors and complete, easy-to-understand directions.
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
HO Magnetic Signal Co. Model 3 Wigwag Flagman
HO Flexible Textured Freight Car Load Sheets - Medium Stone Rip Rap
Product Information
Add realistic loads to open freight cars or trucks (sold separately) with these unique loads from Chooch Enterprises. Molded in flexible vinyl thats easily cut to fit with scissors or hobby knife, each features realistic texture and surface detail, and can be finished with most acrylic paints (sold separately) for added realism.
Measures: 11-1/2 x 3-1/2inch (29.2 x 8.8cm)
N Scale Cork Roadbed Sheets (10/pkg)
10 sheets per box. 1/8 (3 mm) x 3-1/4 x 36.
Midwest N Scale Cork Roadbed resembles the ballast used on real railroads. It has consistent thickness, is lightweight, cuts and shapes easily and offers excellent sound absorption! Cork roadbed sheets are perfect for sidings and yards.
HO USRA Double sheathed wood boxcar
Wabash
Includes road numbers 79687, 79834, 79945, 80176
During World War I the US railroads were struggling to keep up with wartime traffic, in part because of a shortage of service- able freight cars. In an attempt to solve this problem, President Wilson nationalized the railroads under the United States Railway Administration, or USRA. One of the first tasks assigned to the USRA was to develop common designs for new freight cars. Among these was a 40ft double-sheathed wood boxcar with a fishbelly steel underframe.
Starting in 1918, nearly 25,000 copies of the double-sheathed boxcar were built and delivered to 24 railroads throughout the country. The cars were well received, and many cars continued in regular service on many roads into the 1950s with many updated to the newer AB-brake system.
Rapido’s new model of the USRA double-sheathed boxcar features an all-new body with correct fishbelly underframe and correct free-standing details. Models will be equipped with either KC or AB brakes as appropriate. These cars fill a need for a state-of-the-art model of this common car on any transition-era or earlier period layout.
Model Features
Accurate new tooling
Correct details including roof and handbrake
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Accurate decoration
Fully decorated and assembled
Factory-installed Macdonald-Cartier couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO GP40-2L Diesel - DCC & Sound - Indiana Harbor Belt #4020
IHB FEATURES:
- Painted over class lights
- Long hood-mounted horn
- Cab-mounted bell
- Removed plow
- Sinclair antenna
- 3600 Gallon fuel tank
ROAD NUMBER SPECIFIC FEATURES:
#4020
- Dual rear headlight
- square EMD ditch lights
- modified truck side frames
#4021
- Single rear headlight
- square EMD ditch lights
#4022
- Single rear headlight
- small round ditch lights
GP40-2 LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18 inches
SOUND-EQUPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO RTR ACF 4650 3-Bay Hopper - Great Northern #171728
Date: 11-66
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
N Scale Motorized 130ft Turntable w/DCC - Assembled
DESCRIPTION:
- 130ft length typical of large tables built from 1920s on - some still in service today
- Must-have detail for engine terminals
- Holds locos up to 9-3/4 inches - big enough for a 4-8-8-4!
- Layout mounting templates for pit and Cornerstone Turntable Control Box
- User-friendly, illustrated instructions simplify assembly
- Requires 9-15/16 inch mounting hole to be cut in layout for installation
- 10-3/8 inches overall diameter
- Control Box included for use on layouts with DC or DCC train control
New Cornerstone Turntable Control Box for simple operation and programming with:
- Programmable indexing for up to 99 different tracks
- One-touch 180-degree bridge rotation in either direction
- Simplified LED display with adjustable brightness
- Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately)
Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone - Advanced Control Module (933-2321, available separately)
- Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included)
- Comes with Code 80 rail installed on bridge
HO GP18 - DCC Ready - Grand Trunk Western #4706
Detailed Information
GTW FEATURES:
Winterization Hatch
Beacon
Bell mounted on long hood end
Sinclair antenna
Separate, optional ACI labels
Canadian style handrails
Separate, optional spark arrestors included with model
These units were part of an 8-unit order that arrived on the GTW in February 1960. They were part of the general freight pool of locomotives and were often seen working with their GP9 predecessors.
GP18 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Accurately-painted and printed paint schemes
Body-mounted McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
HO PS-2-4427 High Side Covered Hopper - Milwaukee Delivery 3-1967 #97885
Product: Pullman-Standard PS-2CD 4427 ?High Side? Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36″ Wheels
? Milwaukee Road MILW ?Delivery 3-1967? wears the classic yellow and black graphics as applied to this 300-car order from Pullman-Standard in 1967. Tangent?s previous run from 2018 featured Milwaukee?s 1968 order of cars with gravity-pneumatic outlet gates. We have carefully replicated the lettering on every panel, bay and center sill from bold MILWAUKEE ROAD to the tiniest PS lot 9174 stencil number. All of the lettering is present and accurate. These cars feature Miner gravity gates and a PS ribbed-style roof hatch. The model also features 100-ton Barber S-2 trucks with rotating Timken caps. Each SKU number varies with CAPY, liner stencil and related Pullan date information. We hear you Milwaukee Road modelers, and your continued requests for more MILW Tangent covered hoppers in our correct shade of Federal Yellow!
HO Lasercut Graffiti Decals Mega Set - Set #2 pkg(9)
9 Designs
All of our graffiti decal sets are now lasercut. What this means is you no longer will have to trim the decal close. You only have to cut a couple of small tabs and soak the sheet in water. The trimming has been done for you by our laser cutter! As an added bonus the decals are printed on white decal paper making them more opaque.
Love it or hate it, graffiti is everywhere. We do not condone painting graffiti on real railroad cars, buildings, bridges, etc. and it is against the law. But defacing your model railroad with Blair Lines Graffiti Decals is fun and still legal as far as we know! All decals are reproductions of graffiti found on real railroad cars. Decals are not shown actual size.
HO Quonset Hut - Kit
Built by the thousands during WWII, these pre-fab metal buildings found all sorts of post-war uses. Kit includes one complete building and features pre-cut door and window openings.
DIMENSIONS:
24 x 26 x 12 inches
HO 66ft Bulkhead Flatcar - Ontario Northland (Yellow Scheme) (6pk)
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
HO GMD SD40-2 - DCC & Sound - BC Rail (RWB Hockey Stick) #765
Product Information
This Bowser Executive Line GMD SD40-2 is based on the huge fleet of diesels constructed by the General Motors Diesel Division plant in London, Ontario for several Canadian railroads, and a few US lines as well. This finely detailed model features GMDD and railroad-specific details, accurate decoration, operating headlight, can motor, brass flywheels, nickel-silver wheels with RP25 flanges and knuckle couplers.
Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound Select decoder. Analog (DC) version has 21 pin socket for DCC module.
Bowser does not recommend LOK sound locos for use on DC layouts.
Features LokSound Select decoder, GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, Flywheels, Can motor, RP25 flange, KD couplers
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
HO Value Line RTR - 13 Panel Coalporter - Conrail Quality #505580
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
VIA Rail HEP 1 (2020 to Present)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
9ml pan (D) - Raw Umber Tint
Each PanPastel Color is loaded with the highest quality artists pigments; and is made using a unique manufacturing process requiring minimal binder, resulting in rich, ultra soft and low dust colors. PanPastel Colors can be mixed for an infinite palette of colors.
Each pan contains 9ml (0.30 fl oz) of color. 40percent more than the average pastel stick, and yielding approx. 4-5 times more coverage.
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21031
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO MLW M420 - DCC Ready- Ontario Southland Railway(Red/White/Blue) #647 Otter Valley Railroad Exclusive
Each model comes with a signed certificate of authenticity from CEOs of Ontario Southland and Otter Valley Railroad
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO RTR 53ft Jindo Container CSX
3 pack Set 2
MODEL FEATURES:
Fully assembled
Newest vertical rib front
Easily stackable
Separately applied door closure rods
Each container individually numbered
Razor sharp printing and painting
HO 13,600 Gallon Acid Tank Car - Union Tank Car/White (UTLX) (3pkg)
ETA: July 2023
Road Numbers: 11377, 11781, 11760
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Yellow Ocher
Use to stain rocks, plaster castings and terrain. Water soluble colors can be diluted and blended in endless combinations to model a variety of scenic effects. Extremely concentrated for economical use, each bottle includes four ounces of liquid pigment. (Photo shows plaster rock casting, sold separately, stained with this color.)
HO 60ft Flat Car - OTTX/Brown Logo #97058
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
Spray Can - Metallic Black (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15354
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- SP -B-70-54 Delivery 2-1970
Product: Greenville 86′ Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Southern Pacific: This B-70-54 group covers SPs first order of quad door cars that were part of the GM Stamping Pool out of Cleveland, Ohio on the B&O. The scheme, of course, is simply one of the coolest paint jobs ever applied to a Greenville 86ft boxcar. Hold this car in your hand to appreciate the nuanced differences between white stenciling and SP Lettering Gray stenciling. From the huge dark gray arrows pointing to the centered SP logo, to the smallest black door handle detail, it?s all there. The SP cars feature their as-built 1970 appearance that includes Apex crossover platforms, a Universal hand brake housing (with separate long handle!) and a Universal brake wheel. SP ordered their cars with Center-Of-Car cushioning, and we have duplicated this setup, with a complete COCC underframe and draft gear. 70-Ton Trucks with 33in wheels and rotating Timken roller bearing caps finish off this replica. These SP replicas are Ready-To-Operate in eight numbers!
Athearn HO Scale - Power Truck/ Triple Clasp, SD/38/40/45
pkg of 1
GMD SD40-2f - DCC & Sound - CP Rail (Round Porthole, White Stripe) #9024
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
N Scale NSC 73Ft Centerbeam Flatcar - Trailer Train (TTZX) #861241
The N Scale NSC 73Ft Centerbeam Flatcar features:
Two top truss configurations; early Z pattern and standard closed pattern with tie-down brackets
Two deck configurations; early with risers and mid without riser
Two underbody configurations
Multiple brake stand options
Multiple truck types
Fully detailed underbodies with brake piping and rigging
Free rolling, metal wheelsets
Multiple end cage variants
HO EMD SW9 - DCC & Sound - Illinois Central (IC Black Scheme) #468
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Illinois Central:
Delivered in 1951
Road style end rails with drop steps
Short side handrails
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
Soft Flake Snow - Shaker (57.7 in3)
Use this product to model winter scenery on model railroads, dioramas, military models, school displays or where collectible houses are displayed. Model a light dusting of snow, heavy drifts or create frothy rapids on a water feature. Comes in a handy see-through, reusable Canister Shaker with a sprinkle/pour dual-purpose lid!
1/4In Acrylic Round Rod (10pcs)
This clear solid rod can be used for bracing, cabling, piping, or wherever round stock is appropriate. Also quite useful in crafts and educational projects. Precision Extruded in Clear Acrylic Plastic.
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
CLEAR
HEIGHT IN INCHES
1/4In
HEIGHT IN MM
6.4mm
LENGTH IN INCHES
8-3/4In
LENGTH IN MM
225mm
HO Flexible Roadway - Distressed Concrete - Large Cracks
Product Information
Model worn city or country concrete streets with these realistic roadway sheets from Chooch Enterprises. Flexible vinyl sheets feature realistic color and texture, and are easily bent or cut to shape with scissors or hobby knife. Can be finished with most acrylic paints for added realism.
Measures: 11-1/2 x 3-3/4inch (29.2 x 9.5cm)
Canadian Pacific 36320 Stacked Block
Trucks And Couplers Micro-Trains
Body-mounted couplers
Craft Plywood Sheet - 12 x 12inch x 1/2inch Thick - Single Piece
Perfect for painting, staining, stenciling and wood burning
Cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use
1/2inch (1.27cm) Thick x 12 x 12inch (30.4 x 30.4cm)
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov
SmokeBox Graphics Helvetica Box Car Lettering
Decal set covers leased boxcars including BKTY, EEC, LRS, WRWK, and others using Helvetica lettering. Full data and stencils for up to four cars, billboard lettering for two. Includes truck side frame reporting marks, red brake shoe labels, and common door markings.
Pairs well with our dark yellow reflective strips!
HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Circle Keystone) #727438
1948+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO EMD F40PH - DCC & Sound - VIA Rail Canada #6406
Product Information
Power your favorite Amtrak(R) or regional commuter trains in style with a WalthersMainline F40PH on the job! Built especially for passenger duties, the prototypes entered service in 1976 and many are still going strong today. Based on Phase 2b prototypes, the models feature:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed vertical hand rails
Molded drill starter points for grab irons (sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Fully assembled
21mtc connector
ESU Sound for DCC and DC layouts featuring:
- 4 function outputs with brightness control by CV
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch prime mover sounds
- Compressor
- Dynamic brake
Same powerful drive as WalthersProto(R) locos featuring
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Heavy die-cast metal chassis
- Constant and directional LED lights
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
Alternate horns and bell sounds can be programmed on the sound decoder using these CVs:
Horns: CV163 = 0 - Nathan K5LH (default)
CV163 = 1 - Nathan K5HLL
CV163 = 2 - Nathan K5H
CV163 = 3 - Nathan K5LLA
Bells: CV164 = 0 - Graham White E-Bell (default)
CV164 = 1 - GE Steel Bell
HO Dash 8-40CM - DCC & Sound - Quebec North Shore & Labrador: QNSL #403
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
HO Scale 89ft Channel Side Flatcar - Trailer-Train/JTTX #930189
(yellow, black; General Service)
Built especially for the bigger trailers entering service in the 1960s, this Walthers Mainline model of the 89ft channel side flatcar is a must for period intermodal modeling in HO scale. Based on the F89F flatcars owned by Trailer Train and many railroads, over the years these cars carried 28, 40, 45, 48, and 53ft trailers.
FEATURES INCLUDE:
- One time run of these road-numbers, limited quantity available!
- Heavy die-cast metal underframe for great performance empty or loaded
- Used in piggyback and other service 1963 to the present
- Prototypical C-shaped steel channel side sills
- Detailed brake gear
- Swinging coupler pocket for 18 inch radius curves
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Alco FA-1 & FB-1 Set - DCC & Sound - Canadian Pacific (Block Scheme) #4012, 4410
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
Enamel Paint - Panzer Grey Streaking Grime - 35mL
A very special product for doing streaking grime effects over dark grey surfaces such as German vehicles painted with Panzer Grey. Also suitable for other effects such as add chromatic richness to any piece or surface. This enamel should be mixed well and then painted in vertical lines on the sides of the model. After, you just blend with a clean brush moist with Enamel Thinner to produce some great realistic streaking grime effects.
Tunnel Portals Concrete
Great for single track tunnels entrances and exits. Color with Earth Colors Liquid Pigments.
Outside dimensions: 2 7/8inch w x 2 1/2inch h.
Inside dimensions:1 7/16inch w x 1 7/8inch h.
HO Union Pacific Cabooses CA-1 through CA-9 (1941-1977) - Decals
Circa: 1941-47
Equipment Type: Caboose - CA-1 thru CA-3 - Red Scheme
Description: Union Pacific Cabooses CA-1 through CA-9 (1941-1977) - Caboose - CA-1 thru CA-9 - Yellow & Red Schemes - Waterslide Decal - HO Scale
HO GMD SD40-2W - DCC & Sound - CNNA (Map w/ Web Address) #5339
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. DCC with Sound version features LokSound V5 decoder.
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
HO Row House - Kit
Product Information
Walthers Cornerstone Row Houses are perfect for adding big city realism to your layout. Each kit includes a pair of brick side-by-side homes with a raised concrete basement foundation with windows. In many locales row houses line the streets near large factories such as steel mills and can also be found in entire neighborhoods in urban settings. Full blocks of identical homes are easy to model by combining several kits side by side. If you have densely populated neighborhoods on your steam or diesel-era layout use the Row Houses to add realism to your layout along with other Cornerstone HO Scale housing.
Classic home for big city neighborhoods
Found in the heart of many North American cities for over 100 years
Easily combined to build a typical block or entire neighborhood of homes
Printed window treatments
Separate doors, windows, steps and downspouts
Molded in three colors and clear plastic
As shown the Row Houses kit measures: 7-13/16 x 4-9/32 x 4inch (19.8 x 10.8 x 10.1cm)
HO FP45 - DCC/Sound - BNSF #93
BNSF NOTES:
BNSF retired all of their FP45 units in 2002; but what if the railroad had something else in mind for these units? In this alternate history, BNSF set aside two FP45s to be rebuilt and repainted for business and executive train service. This release depicts the former ATSF 93 and 97 in full BNSF Heritage II livery, ready to once again speed passenger trains across the southwest.
BNSF FEATURES:
- Large and small antenna platforms
- K3LA horn mounted on long hood
- Nose-mounted headlight with upper safety light plated over
- Legendary Liveries
LOCOMOTIVE FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Coupler cut levers
- Flexible rubber MU hoses
- Flexible rubber trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Fine-scale Celcon handrails for scale appearance
- Windshield wipers
- Lift rings
- Wire grab irons
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Sander lines
- McHenry scale knuckle couplers - Kadee compatible
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED bulbs for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
- Flush mounted port hole window glass
- Flexicoil-C sideframes with high brake cylinders
- Minimum radius: 18 inches
- Recommended radius: 22 inches
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
X-2F Horn-Hook Couplers, pkg(12)
Walthers Cornerstone Horn-Hook Couplers are direct replacements for the older-style X-2F couplers in Walthers rolling stock kits. Couplers are molded in Delrin(R) plastic. Horn-Hook Couplers will not couple to knuckle couplers.
Fits rolling stock with older-style horn-hook couplers
Direct replacement for couplers in Walthers rolling stock kits
Molded in Delrin(R) plastic
12 per pack
HO AAR 1944 Boxcar - Illinois Terminal #6025
Expand HO freight service with these colorful Walthers Mainline models based on the popular American Association of Railroads (AAR) standard boxcar design from 1944. Used for all types of general loading, the durable steel cars were still going strong into the 1980s.
Features of these models include:
-Limited Edition - one time run of these road numbers
-4-4 Improved Dreadnaught ends
-Murphy panel roof
-See-through Apex steel running board
-6ft Youngstown doors
-10ft 6in Interior height
-AAR (Tab) side sills
-Correct 33in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO SD70ACe - DCC & Sound - Ferromex #4029
Overview
FXE FEATURES:
Lit Number Boards
Truck lights
Nose mounted headlight
Early Brake wheel
Unique paint scheme
In 2021, Ferromex repainted one of their SD70ACes into this bright red and grey scheme. By spring of 2022, they released a second repainted unit. Both have minor detail and art differences between them and would add some color to your fleet!
ROAD NUMBER SPECIFIC FEATURES:
#4029
2021 Repaint
#4053
2022 Repaint
SD70ACE SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Athearn Genesis HO 13,600 Gallon Acid Tank Car, Procor #16530
Athearn Item #: ATHG25643
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Two different body phases (early and late)
Many separately applied details
Etched metal walkways
Different top platforms as appropriate per prototype
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18in
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry (TM) scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
2mm Static Grass - Winter Grass (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
0.064 inch Thick Brass Flat Sheet - 6x12inch
Brass Flat Sheet 6inch Wide x 12inch Long (1 pc)
15 x 30cm
HO SD9043MAC - DCC Ready - Union Pacific #8026
ETA: October 2023
Detailed Information
UP FEATURES:
Leslie 3-chime horn
Large EMD plow
Front ditch lights
During the horsepower race of the 1990s, EMD offered an -upgradable- SD90MAC. EMDs 6000hp 256H prime mover was still being tested for reliability and issues at the time and UP needed power quickly. To combat this, EMD offered the SD90 with the 4300hp 710 prime mover in its place until the 256H prime mover was ready to be installed after successful testing. Unfortunately, the 256H was deemed too problematic and the conversion was never completed. UP classed these as SD9043MACs. Purchased in 1996, these big brutes were initially used in coal drag service before ultimately being used in other types of service. They were factory delivered with the -We Will Deliver- slogan. By the mid 2010s, a large batch were sold to NS for rebuilding into SD70ACUs.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights
Illuminated number boards
Etched, see-through walkway steps
Dual Sugarcube speakers for optimal sound quality
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined
flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field
measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21012
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO EMD SD9 - DCC & Sound - Chicago & North Western #6608
Chicago & North Western
- Rebuilt at the Oelwein Shops with chopped down nose - a first in HO Scale!
- Modified panels on side sills of locomotive
- Modified/plated over details of dynamic brake blister (Smooth plating over where grilles once were)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Weyerhaeuser #1109
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO F30A MOW Camp Trailer: Painted, Unlettered Office Trailer
This trailer does not come with a flatcar
N Scale Short Barrel Ore Hopper - Undecorated
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO EMD GP7 - DC/DCC Ready - Burlington Northern BN #1636
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
BN FEATURES:
Roof-mounted -Torpedo Tube- air tanks
Winterization Hatch
Cab-mounted Beacon (Functions in DCC)
Fire-cracker antenna
Roof-mounted steam era bell
The Burlington Northern Railroad came into existence in March 1970 when the ICC gave the ok for the Chicago, Burlington & Quincy, Great Northern, Northern Pacific and the Spokane, Portland & Seattle railroads to formally merge and form one company. One result of the merger was the creation of a large group of GP7s on the roster with different features. The two ex-Northern Pacific GP7s offered in this Genesis release came with roof top air tanks in order to equip them with larger fuel tanks to extend their operating range.
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO EMD GP7R - DC/DCC Ready - Chicago & North Western CNW #4140
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
CNW FEATURES:
NEW! Non-Dynamic with roof access hatches
1700-gallon fuel tank
Partial skirting above fuel tank
All-weather firemans side window
Flashing xenon strobe (in DCC mode only)
Wheel bearings per prototype
Era: 1982+
Era: 1993+
Era: 1982+
Chicago & North Western-
-Union Pacific Licensed Product
These Ex-CRI&P units were purchased by C&NW second-hand from Precision National in 1981, serving the railroad in a variety of service for the next 15+ years. 4160 became inoperable in 1998. In 2007 it was moved to the Illinois Railway Museum and repainted into the blue and white Rock Island paint scheme.
ROAD NUMBER SPECIFIC FEATURES:
#4140 Phase III body, 5-Chime Horn, Firecracker antenna, Front snowplow
#4160 Phase II body with 86inch Doors, 3-Chime Horn, Spark arrestors, Front snowplow
#4193 Phase II body with 86inch Doors, 5-Chime Horn, Front snowplow
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO MLW M420 - DCC Ready- Ontario Southland Railway(Red/White/Blue) #646 Otter Valley Railroad Exclusive
Each model comes with a signed certificate of authenticity from CEOs of Ontario Southland and Otter Valley Railroad
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
ProtoThrottle Receiver for ESU CabControl, JMRI WiFi Throttle, and Digitrax LNWI
This receiver connects the ProtoThrottle to an ESU CabControl system, Digitrax LNWI, JMRI WiThrottle server (a.k.a. Engine Driver or other phone throttle applications), or other DCC systems that expose a WiThrottle-compatible server, such as the MRC Prodigy WiFi, or DCC-EX. It receives the wireless signal(s) from multiple ProtoThrottles and translates them to be sent to the command station over the WiFi network.
The MRBW-WIFI includes a mini USB cable and 5V/1A USB power supply with a North American plug.
Specifications:
3.5(L) x 2.3(W) inches
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200095
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
HO GMD-1 - DCC & Sound - Canadian National (1400s Stripes) #1422
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - New York Central (NYC Green) #157813
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO EMD GP40 - DCC & Sound - Wisconsin Central #3014
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO SD70ACU - DCC & Sound - Canadian Pacific (Beaver Scheme) #7050
ETA: October 2023
Detailed Information:
CP FEATURES:
CP System Red with new monochrome Beaver logo
Traditional nose detail configuration
Blue flag bracket
Center mounted nose door lock
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO NSC Ballast Hopper - Canadian National (Maintenance Scheme) #302278
1976+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
Evans X72 Box car: Penn Central w/ Small Logo - Single Car #269990
Detail Variations:
As operated between 1973 to 1976.
6-pack includes the following numbers:
#266500
#266822
#266899
#269175
#269447
#269990
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
HO PS-2-4427 High Side Covered Hopper - TLDX Delivery Cargill 7-1967 #7251
Product: Pullman-Standard PS-2CD 4427 ?High Side? Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with Timken rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36″ Wheels
? TLDX ?Delivery Cargill 7-1967? shows a classic private leasing delivery scheme, with the large round Cargill placard filling the side of the car. This car features all of the Pullman phase details for the era, including center sill supports between the bays, open end running board supports, Miner gravity gates and ribbed-style roof hatches. The model is equipped with 100-ton Barber S-2 trucks with separately applied brake beams along with rotating Timken caps
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Southern #11048
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO EMD GP9 Phase II, High Short Hood - Standard DC - Grand Trunk Western GTW #4922
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today. Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21mtc connector
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
A great starting point for a custom-build, features of this model include:
Dynamic w/48inch fan and nondynamic long hoods
Single fuel filler on sill
Drop steps
Footboards
8 styles of MU stands and receptacles
MU hose clusters front and rear
Ratchet- and Peacock-style handbrakes
Steam generator and piping
Pyle (early and late) and Mars dual-sealed beam headlights
See-through 36inch and 48inch fans w/separate blades
Roof-mounted air tanks and piping (-torpedo tubes-)
Rounded and Square winterization hatches
Harco, C&O, Super lifting and non-lifting and N&W-style spark arrestors
Folded-style cab window deflectors
Canvas and metal sunshades
Two all-weather cab windows
Blomberg Type B sideframes w/separate swing hangers and brake cylinders
Roller bearing, sloped, square and plain bearings
Separate speed recorder and Automatic Train Stop (ATS) shoe
Two styles of fuel tanks; 1200/600-gallon fuel and water and 1600-gallon
HO RTR 62Ft Tank - ACFX #71700
Detailed Information
MODEL FEATURES:
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied wire grab irons
Replacement parts available
33inch machined metal wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Replacement parts available
Minimum radius: 18inch
Athearn Roundhouse 79106 HO 50ft Plug Door Smooth Side Box, MILW
No2617
MODEL FEATURES:
Fully-assembled and ready to run out of the box
Cars feature standard or cushioned underframe per prototype.
Highly-detailed, injection-molded body
Separately applied roof walk and brake wheel
Positionable sliding doors
Painted and printed for realistic decoration
Weighted for trouble free operation
33in machined metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
Pullman Standard introduced the all steel PS-1 box car in several diffent sizes including 40, 50 and 60 footlengths. Multiple door configurations and styles made these box cars very flexible. Pullman Standard had their own signature details, such as rolled non-terminating ends, and bow-tie stamped metal roofs. These were signature elements that identified the PS-1 among the other freight car builders of the time.
SPSF RAIL-O-GRAM FEATURES:
This unique car was painted by the Santa Fe, and was subsequently signed by many people in support of the SPSF merger proposal. Despite this, the merger was subsequently denied by the ICC.
HO Custom Oil Barrels - Silver, Industrial (5)
Pre-painted silver and labeled. Assorted product labels in each set.
Broadway Limited - New York Central
HO Scale EMD F7B Short Lightning Stripe Paragon3 Sound/DC/DCC
The EMD F7 was a 1,500 horsepower (1,100 kW) Diesel-electric locomotive produced between February 1949 and December 1953 by the Electro-Motive Division of General Motors (EMD) and General Motors Diesel (GMD).
Although originally promoted by EMD as a freight-hauling unit, the F7 was also used in passenger service hauling such trains as the Santa Fe Railways Super Chief and El Capitan.
The F7 was the fourth model in GM-EMDs successful line of F unit locomotives, and by far the best-selling cab unit of all time. In fact, more F7s were built than all other F units combined. It succeeded the F3 model in GM-EMDs F unit sequence, and was replaced in turn by the F9. Final assembly was at GM-EMDs La Grange, Illinois plant or GMDs London, Ontario facility.
The F7 differed from the F3 primarily in internal equipment (mostly electrical) and some external features. Its continuous tractive effort rating was 20% higher (e.g. 40,000 lb (18,000 kg) for an F7 with 65 mph (105 km/h) gearing, compared to 32,500 lb (14,700 kg) for an F3 with the same gearing.) A total of 2,366 cab-equipped lead A units and 1,483 cabless-booster or B units were built. Many F7s remained in service for decades, as railroads found them economical to operate and maintain.
NEW Paragon3 Sound & Operation System FEATURING ROLLING THUNDER with Authentic Sounds and Prototypical Operation in both DC and DCC environment
- Locomotive Composition: ABS Body with Die Cast Chassis
- Couplers: (2) Operating Kadee or Compatible
- Compatible Tracks: Code 70, 83, 100 Rail
- Minimum Operating Radius: 18 in or greater
Blair Line HO Scale - Mega Set Modern Tagger Graffiti Decals - Set #14 pkg(10)
N Scale Centralia Car Shops Superdome Passenger Car - ON Rail (Otter Rapids) #900
- Includes Magnetic Wand to Light Up!
LIMITED QUANTITIES AVAILABLE!
Athearn - N Scale 2 Bay 2600 Covered Hopper - Winchester & Western - #4004
Flush or overhanging roof per prototype
Etched metal roofwalks
Factory installed wire roofwalk grab irons
McHenry knuckle spring couplers installed
Weighted for optimum performance
Accurately painted and printed for prototypical realism
Minimum radius: 9 3/4"
HO Dash 8-40CM - DCC Ready - BC Rail: R/W/B w/ Frame Stripe #4626
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
HO EMD E8A w/HEP - DC/DCC/Sound - Amtrak: Phase 2 #495
The Rapido Trains HO scale Rebuilt E8 w/HEP locomotive features:
Correct HEP muffler and hatch
Multiple dynamic brake options and fans
Sealed, twin-beam headlight configuration
Modified pilot
Blanked sides with appropriate grille work
Skirted or non-skirted fuel tanks
Hyatt roller bearing journal covers
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Accurate E8 sounds provided by ESU LokSound
Complete lighting effects headlights, class lights, backup lights, ground lights, cab lights, Stratolite or beacons and more. -Not all lighting features will work in DC mode.
Numerous road-specific detail parts in both plastic and etched metal.
HO Pole Barn and Sheds - Kit - Set of Four Buildings
From farm to big city, the Conerstone Pole Barn and Sheds kit adds plenty of detail to your HO layout! With parts for four complete buildings and accessories, features of these structure kits include:
- Based on metal pole building structures - fits 1950s to the present
- Typical of service and support facilities at todays intermodal terminals, classification yards and industrial parks
- Easily model all types of similar structures
- Great value with Pole Barn, Large Shed, One-car Garage & Small Shed
- Separate doors, windows, nonworking lights, electric meter, propane tank, dry hydrants and more
Pole Barn: 6-9/64 x 8 (at roof overhang) x 3-5/16 inches (15.6 x 20.5 x 8.4cm) - overhead doors measure scale 12 x 12 ft (3.6 x 3.6m)
Large shed/office: 2-1/8 x 2-13/16 x 1-1/2 inches (5.4 x 7.1 x 3.8cm)
Single-car garage: 1-21/32 x 2-29/64 x 1-11/32 inches (4.2 x 6.2 x 3.4cm)
Small backyard shed: 1-27/64 x 1-45/64 x 1 inch (3.6 x 4.3 x 2.5cm)
50Ft Smooth HC Plug Box - BNSF/Round Logo #712702
Detailed Information
MODEL FEATURES:
Former MDC tooling
Brand new paint schemes
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Separate brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister safely holds model for convenient storage
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of -In Service- equipment; -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per road number matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
HO Scale GP38 - DCC & Sound - Conrail #7832
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
Special
