HO Wrapped Lumber Load for 72ft Centerbeam Flatcar - Bennett Lumber
(Blue, red)
Put your railroad to work moving these Walthers SceneMaster Wrapped Lumber Loads from sawmills to local building suppliers. Made especially for the HO Walthers Mainline 72ft Centerbeam Flatcars (#910-4800 series, each sold separately) and adaptable to most cars with a similar interior length, each is pre-painted and lettered in authentic schemes, and snaps easily onto the car to add realistic detail in a matter of minutes!
HO Value Line RTR - 13 Panel Coalporter - NYC (Conrail Quality) #505779
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52R class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
OVR Exclusive - HO Bi-Level Auto Rack - Canadian National/TTGX #702477
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO Cornerstone Grain Surge Bin - Kit
Product Information
The Walthers Cornerstone Grain Surge Bin is an ideal addition to any diesel-era grain elevator or feed mill scene. Above the surge bin, the funnel-shaped distribution head of the grain conveyor routes grain into the proper pipe, sending it cascading into storage bins, surge bin, covered hopper or grain truck. The surge bin regulates the flow of grain into the grain dryer. The surge bin is a necessary part of any grain handling operation and will add realism to your scene.
As shown the model measures: 1-1/2 x 1-1/2 x 9inch 3.8 x 3.8 x 22.7cm
Detail and expand your grain complex with Cornerstone grain handling structures.
NOTE: Photo shows model with the Walthers Cornerstone Grain Dryer 933-3128 (directly underneath the Surge Bin) and Grain Bin 933-3123, both sold separately.
Molded in realistic color
Easy to build
Great for modern grain elevators and other industries
HO Budd Slumbercoach - Amtrak (Phase 1) #2026 Loch Lomond
All new from the ground up, the Rapido Slumbercoach features:
Designed from original blueprints
Full Rapido level of underbody detail including separate pipes and conduits
Full multi-color interior detail including roomette doors
Track-powered interior lighting (operable on both DC and DCC)
Accurate GSC 41-NDO-11 trucks with disc brake detail
Etched-metal end gates
Sprung diaphragms
Rapidos renowned stainless-steel finish
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
HO 13/32 inch Open Web Truss - Cellform Style (2pcs)
Use for roof trusses, space frames and other modern and/or futuristic steel structures. Precision Injection Molded in Styrene Plastic. Manufactured with a special tongue and groove connection feature to quickly and accurately attain the desired length.
SCALE
ALL
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
5/16
HEIGHT IN MM
7.9mm
WIDTH IN INCHES
13/32
WIDTH IN MM
10.3mm
THICKNESS IN INCHES
7/64
THICKNESSS IN MM
2.8mm
LENGTH IN INCHES
4-1/16
LENGTH IN MM
100mm
4 x 6 x 2-1/16 inch - 10 x 15 x 5.8cm
1/8 inch OD Square Aluminum Tube - 0.014inch Thick x 12inch Long
Square Aluminum Tube (1 pc)
Outside Diameter: 1/8 inch
Atlas - N Scale GP-9 TT - Gold DCC Sound - Wabash #495
Features:
Powered low friction drive
Blackened metal wheels
Dual brass flywheels
Directional lighting
Golden-white LEDs
AccuMate couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
AccuMate couplers are made under license from AccuRail, Inc
1:16 ABS LADDER (2pcs)
Use as straight ladders commonly found in numerous industrial, commercial, and residential applications. Note, in most industrial applications using a fixed ladder, a cage is also desirable. See CL Safety Cage & Ladder Sets. Precision Injection Molded in Gray ABS Plastic.
Ideal for all outdoor or professional model construction where model life is critical.
SCALE
1:16
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/4In
HEIGHT IN MM
19.1mm
WIDTH IN INCHES
1-3/32In
WIDTH IN MM
27.8mm
LENGTH IN INCHES
15In
LENGTH IN MM
375mm
HO RTR 52Ft Mill Gondola - Rock Island #680111
Detailed Information
MODEL FEATURES:
Body-mounted McHenry operating scale knuckle couplers
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Razor sharp painting and printing
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SECX #2315
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Scale - 39 Ford Half Ton Flatbed- Unpainted and Resin Cast Kit
HO SD70 - DCC & Sound - Illinois Central #1007
Detailed Information
IC FEATURES:
As-delivered IC scheme in 1995.
P5 horn
Spare knuckle brackets on rear pilot
Spare knuckle basket on walkway
Sinclair and can-type antennas
Cab Vent
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Orange) #505486
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
Forklift 2-Pack - Assembled - Yellow
HO UAC TurboTrain Completion Pack: VIA Set #1
#203-226-251 + IC-34 #261
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OFOX (6 pkg) #9
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
1720
1774
1799
1838
1860
1866
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Greenville 86Ft Double Plug Door Box Car - Norfolk & Western (Delivery 1-1978) #861348
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Norfolk & Western (NW) -Delivery 1978- replicates another major player in the world of Greenville 86Ft Boxcars. The NW rostered several Greenville series, but the 1978 order was the biggest. In fact, this 1978 B-138 class of 317 cars was the biggest Greenville order of any railroad. The bold NW graphics are almost understated on a boxcar of this size, but this paint scheme is one example that literally defines modern auto parts trains. The NW cars feature the correct late-Greenville body with 5 grab irons on each side along with body mounted brake gear. Those gorgeous 100-Ton -Low Profile- Barber S-2-C trucks show off the accurate rotating Timken bearing caps. SKUs -01 through -06 have January 1978 data and SLUs -07 through -12 have February 1978 data.
HO 53ft Singamas Corrugated-Side Container - Canadian National
(gray, red; CN Intermodal Logo)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes
HO EMD SD70M-2 Diesel - DCC & Sound - New Brunswick Southern Railway (Maine Northern) #6406
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
NBSR FEATURES:
Former NS units
Front and rear ditch lights
PTC antennas
The New Brunswick Southern Railway is a Canadian short line which, combined with its sister company Eastern Maine Railway, connects Saint John, New Brunswick, with Brownville Junction, Maine. A sister company, Maine Northern Railway operates a separate 258 mile line. In 2021, a group of six former Norfolk Southern SD70M-2 locomotives arrived on the property. Painted green and yellow, each component roads
name is on two locomotives; all are owned by the New Brunswick Southern.
ROAD NUMBER SPECIFIC FEATURES:
#6401 New Brunswick Southern lettering
#6402 New Brunswick Southern lettering
#6403 Maine Northern lettering
#6404 Maine Northern lettering
#6405 Eastern Maine Lettering
#6406 Eastern Maine Lettering
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO H21E 4-Bay Hopper - Pennsylvania (PRR Black, Plain Keystone) (6pkg)
1961+
6-Pack includes the following numbers, all individually packaged: #746460, #746647, #746983, #747504, #747892, #748099
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO ACF PD3500 Flexi Flo Hopper -
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990
Car No. 897868
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
Woodland Scenics Static Grass 12mm 627 Light Green
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.08 (10pcs pkg)
G2 Dash 9-44CW Diesel, DCC & Sound - BNSF Railway H1 #1050
ETA: July 2021
BNSF Railway FEATURES:
2010+ appearance for present day operations
Different art per era appropriate changes
Angled engine compartment hood profile
Early -tabbed- dynamic brake intake panels
Late style dynamic brake exhaust fascia
Modified hood section under exhaust
#1050 Primed for Grime with Heritage 1 body
colors and Heritage 2 logo on long hood
Delivered in 1996-97, this was the first (and only) order of BNSF Dash
9-44CWs to wear the GN-inspired -Heritage I- scheme. Many are still in
service today and can be seen on trains across the system. BNSF 1050 is
unique in that it received yellow BNSF initials on its long hood, as opposed to
the standard green initials.
DASH 9 SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Scaled from prototype resources including drawings, field
measurements, photographs, and more
Accurately –painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined
flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
BRAND NEW GENESIS 2.0 TOOLING!
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in
the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights on front trucks
Illuminated front and rear walkway lights
Illuminated class lights (where applicable)
Animated roller bearing caps
N Scale 20ft Reefer Container - ONE (3pk)
MODEL FEATURES:
- Highly-detailed, injection-molded body
- Blister packaging for easy viewing
- Decorated models fully-assembled and ready to run out of the package
- Reefer unit to match prototype
HO GP9RM - DCC Ready - Canadian National (Stripes) #4110
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
Diesel EMD SD40-2 BC Rail #753
ESU LokPilot DCC -motor and light control
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
HO GE 44 Tonner Phase III - DC/DCC/Sound - Southern (Tuxedo Scheme) #1951
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
HO Bathtub Coal Gondola - DREX (ex-Procor) #104018
Built: 5-05
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO Alco FA-1 & FB-1 Set - DCC & Sound - Union Pacific #1603, 1622B
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO Portec 3000 Covered Hopper - Midwest Railcar (MCEX) - #330241
Features:
- Ready to run
- Injection molded plastic
- Fine scale detail with many separately applied parts
- 2 Body and roofwalk variations to accurately match the prototype
- 2 styles of vibrator brackets
- Highly detailed end cages and brake gear
- 100 Ton Trucks
- Metal Couplers
- Etched metal roofwalks and end platforms
- Crisp painting and printing
White w/Railroad Maintenance-of-Way Logo Decals
Fully assembled & painted white - typical of todays heavy trucks operated by railroads, gas, water & power utilities, as well as city, county & state highway departments
Colorful railroad logo decals sized to fit for quick conversion to maintenance-of-way service including BNSF, CN, ATSF, BN, CP Rail, CNW(TM), NS, Chessie, DRGW(TM), MILW, KCS, CR, CSX, SOU, SP(TM) & UP(R)
Licensed replica of popular International trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled & painted
Die cast metal & plastic parts
Introduced in 2002 to replace the 4000-series trucks of the 1990s, the medium-duty 4300 was built in three variations and became a very popular chassis for a variety of commercial applications. Today, they are still in production as the International Durastar.
HO Flexible, Self Adhesive, Paved, 2-Lane Semicircle - White Markings
HO EMD SD7 - DC/Silent - Bessemer & Lake Erie #455
Bessemer & Lake Erie
- Unique -B&LE- style sand fill door hatches
- Long hood forward operation
- Extra large pilot step and corresponding additional stepwell step (First time done on a plastic model!)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Brass Strip - 12inch x 1 inch x .016inch
Length: 12inch
Width: 1 inch
Thickness:0.016inch
Evergreen Scale Models 4100 .100in Opaque White Polystyrene V Groove Siding (1sheet)
HO GE P42DC - DCC & Sound - Amtrak/Operation Life #203
Detailed Information
AMTK FEATURES:
5-Chime forward facing horn
Antenna arrangement per road number
Front and rear marker lights
Amtrak approved artwork
By 1996, production of the P40DC was replaced by the P42DC. Amtrak took delivery of over 200 units and placed them in service to ultimately replace the aging and tired EMD F40 fleet. Horsepower was increased from 4000 to 4250. Many P40DCs were upgraded to P42DC standards by the late 2000s.
ROAD NUMBER SPECIFIC FEATURES:
#8
Phase IV repaint
large and small Sinclair antennas
original style nose
#24
Phase IV repaint
large and small Sinclair antennas
original style nose
#97
Phase IV repaint
large and small Sinclair antennas
original style nose
#203
New Special Operation Lifesaver paint scheme
various grouped antennas
bolted nose
P40DC/P42DC SERIES LOCOMOTIVE FEATURES:
Officially licensed product of Amtrak (Amtrak-painted units)
Officially licensed product of Via Rail Canada (Via painted units)
Officially licensed product of Operation Lifesaver (Operation Lifesaver-painted unit)
4 different nose variations: Amtrak as-built with strobes, Amtrak as-built without strobes, Amtrak rebuilt, and Via
Operating marker lights front and rear on Tsunami2 equipped models
Rear marker lights installed, but not connected on DCC Ready models
Newly-tooled lit number boards
Flashing strobe light and -Big-Hole- emergency light on equipped Amtrak units (Operational on DCC only)
Flashing ditch lights on non-strobe equipped Amtrak units synced with horn blow (Operational on DCC only)
Flexible rubber MU hoses
Flexible rubber trainline hose
Separately applied wire handrails
Exhaust stack
Photo etched metal radiator fan grille
Highly-detailed underframe including air tanks with air lines, air filter, and air dryer with two different types of rock shields
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting including operating ditch lights and red marker lights
Completely-redesigned die-cast frame for superior tractive effort
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Equipped with dual 28mm round speakers
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Alco FA-1 - DCC & Sound - Union Pacific #1609
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO F89-F Bi-Level Auto Rack - New York Central/BTTX #913211
Detailed Information
MODEL FEATURES:
Die-cast underframe
Authentic undulating safety railing
Accurate Whitehead and Kales Auto Rack
Early or late train lines and cut levers per prototype and era
Customer installed end bridge plates (included in box where applicable)
Detailed deck
Wire-formed brake plumbing
Separately applied hand brake per prototype
Separately applied wire grab irons where applicable
Prototypical ride height
70-Ton roller bearing trucks with animated rotating bearing caps installed
Trucks with animated rotating bearing caps
Minimum radius: 22inch - Recommended radius: 24+inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
HO Ready-Made Trees - Sun-Kissed (3/pk)
4-5 inches (10.1 cm-12.7 cm)
Finely detailed, painted, flexible trunks and foliage in a variety of natural contrasts and highlights. Use combinations of types and sizes throughout your layout for superior realism. Trees have planting pin and optional detachable base for temporary placement.
HO PS 40ft Boxcar w/7ft Door - Southern Pacific (Delivery 1950+) #102199
Product: Pullman-Standard Southern Pacific Lines Postwar 40ft6in Box Car with 10ft Height and 7ft Doors
Scale: HO Scale 1:87.1
Truck: Tangent ASF 50-ton A-3 Ride Control trucks
Wheels: 33 inch wheels, with front and back detail and accurate tapered axles
HO Straight Section Feeder Track - 9-3/4in (246mm)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes!
Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation.
Suitable for all types of layouts, temporary or permanent, this modular track system features an integrally molded roadbed for realistic appearance.
Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
HO NSC 3800 Covered Hopper - TH&B (Delivery Scheme) #1508
They are back, again! The famous Rapido 3800 cu.ft. Cylindrical Hoppers make a triumphant ~THIRD~ return with new road numbers and paint schemes!
FEATURES INCLUDE:
- Round-hatch or Trough-hatch design
- Correct Dofasco S-2 100-ton trucks
- Two body variations with 6- or 11-side panels
- Three brake equipment variations and optional additional air reservoir on NSC cars (if applicable)
- Etched running boards and brake crossover platform
- Factory-installed air pipes and coupler cut levers
- Finely molded plastic walkway supports and end cages
- Full separate air piping and brake equipment details
St L& H (St Lawrence and Hudson) #5593 - ESU LokSound & DCC - Just Arrived
81inch Nose, Chicken Wire Radiator Grill Covers, Double Row of Louvred Doors in Compressor Area, Ditch Lights, Removed Class Lights
GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, DC versions have 21 pin DCC socket, Flywheels, Can motor, 40inch wheels, RP25 flange, KD couplers.
HO Extended Vision Caboose - Chesapeake & Ohio #3206
MASTER MODEL FEATURES:
Thin endrails
Roofwalk where appropriate
Accurate painting and lettering
Roller-bearing caboose trucks
Window glazing
Metal knuckle couplers
Separate brake cylinder
Open smoke stack
Triple valve and air reservoir
N Scale American Bungalow - Kit
FEATURES:
- Classic house for 1900s and later neighborhoods
- Found in many North American cities
- Perfect for modeling an entire neighborhood in city or suburbs
- Build with open or closed porch - both styles included!
- Separate one-car garage included
- Optional roof dormers for easy customizing
House measures: 3-7/16 x 2 x 2 inches (8.6 x 5 x 5cm)
Garage measures: 1-5/8 x 1 x 1 inches (4.2 x 2.5 x 2.5cm)
Safmarine 45 Ft Corrugated Container 3PK Set 1
Numbers
464166
464169
464172
Kit - Blue pkg(6)
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1746
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
N scale Barbed Wire Fence - Kit
Easy-to-assemble N Scale Fences from Woodland Scenics feature modular design and include gates, detailed hinges and planter pins for easy installation. Each fence kit includes parts to build 192 scale feet of fencing. Fences for all kinds of scenes are available as part of the line of Woodland Scenics N Scale scenery details.
GP38-2 EMD - DCC/Sound - EJ&E #700
Detailed Information
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; were excited to include new features often requested, to the GP38-2 and upcoming Genesis models.
EJE FEATURES:
Phase I with narrow spaced radiator fans and chicken wire radiator grilles
Standard range dynamic brake
Xenon strobe, effect with DCC+Sound version
Firecracker antennas
-Mushroom- vent on cab roof
Long hood mounted 3-chime air horn on bracket
Underframe mounted bell
Detailed 2600 gallon fuel tank with vertical sight glass
Blomberg-B trucks with leaf springs and Hyatt bearings
All-weather windows on both sides of cab
Post-delivery -in-service- appearance with handrail verticals and step edges painted safety yellow.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
road number as listed - photo may show a different one
Kit
Includes 50 Feet of ladder, ladder brackets and level gauge
HO 52Ft Mill Gondola - Conrail CR #587229
NEW FEATURES:
Refined end-sheet molded-on details
Improved rivet and bolt details
Corrected wire grab-iron placements
New top-chord details
New jack reinforcement pad details
New coupler cut lever mounting details
MODEL FEATURES:
Separately applied wire grab irons
Body-mounted McHenry operating scale knuckle couplers
33inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO 53ft GSC Flatcar - Conrail #716200
FEATURES:
- One-time run of these car numbers, limited quantity available, order now!
- Now with die cast metal body for excellent performance empty or loaded
- Prototypes in service from 1950s to early 2000s - some in work train service today
- Used to carry all kinds of cargo including machinery, lumber, steel shapes, rail and various building materials
- Fully assembled with finely detailed body and deck
- Correct 33 inch RP-25 metal wheelsets
- Proto MA(TM) metal knuckle couplers
RTR 67Ft Trinity 6351 4-Bay Covered Hopper - Cenex Harvest States Cooperative CHSX
Product Information
Expand grain traffic in minutes with layout-ready WalthersProto(R) 67Ft Trinity 6351 Four-Bay Covered Hoppers! Introduced in the early 2000s, these large-capacity cars are industry favorites for handling dired distillers grains (DDG), malt and many other food products. Other features of these HO Scale replicas include:
Limited edition - one time run of these roadnumbers!
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct 36Inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Plastruct 90005 Angle ABS 3/16
Evergreen Scale Models - OD White Polystyrene Rod .125In x 14In (4 pcs pkg)
Pan Head Screws 1/72 x 1/8inch
Steel Pan Head Slotted Machine Screw 1-72 x 1/8inch, 10 pcs
Screws are fully threaded. Length is measured from under the head.
ProtoThrottle (Black)
The ProtoThrottle Realistic Control Stand Throttle mimics a standard EMD control stand including full detent throttle and reverser handles, a spring-loaded horn handle, a push-on/push-off bell button, and fully programmable front and rear headlights with a setting for ditch lights. In addition, the ProtoThrottle comes with a robust faceplate machined from aluminum, including prototype bezels, and anodized to give the look and feel of a real control stand.
FEATURES:
- Fully wireless throttle
- Eight detent throttle handle
- Reverser handle with centered position
- Brake handle and spring-loaded horn handle
- Push-on/push-off bell button
- Front and rear headlight knobs with dim and ditch light settings
- Auxiliary buttons that can be assigned to any DCC function
- Works with any standard DCC decoder
- Interfaces to any DCC system (with separate receiver specific to your DCC system)
- Highly configurable to suit your operating style
- Designed and built in the USA!
- Securely store your throttle with the ProtoThrottle Pocket (sold separately)
- EMD-style knob and handle upgrades available from Scottys Model Shop
Specifications:
- Approximate Dimensions: 7.6(L) x 3.2(W) x 3.0(H) inches
- Approximate Weight: 15oz
- Powered by 2x AA batteries (not included)
HO Trinity 3-Bay Hopper - DM&E #51016
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Union X-3 Tankcar - Procor Limited #37591
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO 100-Ton Roller Bearing Trucks - .088in Tread (2pair)
PRODUCT FEATURES:
Athearn Genesis trucks feature machined metal wheels with RP25 contours and either .110in or .088in tread, and animated spinning roller bearing caps. Trucks are compatible with all popular brands of prefabricated track.
HO Budd Coach: Painted, Unlettered
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
HO Alco RS-3 Phase 1 - DC/DCC Ready - Conrail (ex Erie Lackawanna) w/ Large Louvers #5545
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC.
Exhaust Stack - EMD Non-Turbo Charged GP/SD TYPE - pkg(2)
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- Trailer Train with B&O Bulkhead #92270
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO - Nathan Diesel Air Horn (Brass Casting) - 2 Chime K2
Perfect for moving bulk loads of all kinds that dont require protection from the weather, the WalthersMainline 34ft 100-Ton Two-Bay Hopper is a versatile addition to HO operations!
One time run of these road numbers, order now - limited quantity available!
In service from the 1970s to the present
Used to haul ballast, sand, gravel, ore and other bulk loads
Factory-applied door and brake details
Heavy die-cast metal underframe
Add a realistic load in minutes with the cast resin Chooch Gravel Load (214-7292) sold separately
Correct 36in RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Portec 3000 Covered Hopper - WINCHESTER & WESTERN #1026
Features:
- Ready to run
- Injection molded plastic
- Fine scale detail with many separately applied parts
- 2 Body and roofwalk variations to accurately match the prototype
- 2 styles of vibrator brackets
- Highly detailed end cages and brake gear
- 100 Ton Trucks
- Metal Couplers
- Etched metal roofwalks and end platforms
- Crisp painting and printing
G2 Dash 9-44CW - DCC & Sound - BNSF #767
ETA: Late October 2022
Detailed Information
BNSF FEATURES:
Sinclair & whip antennas
Standard medium snowplow
Nathan K3LA horn
Late (angled) stepwell gussets
Spare knuckles on rear pilot
Front-only ditch lights mounted on anticlimber
BNSF NOTES:
Apart from a few minor spotting features, BNSF 700-799 looked much the same as ATSF 600-699. The biggest difference, perhaps, was the large -BNSF- lettering on the hood, where -Santa Fe- used to reside. Opinions differed on the look, but no one could argue that the face of an iconic railroad had changed forever!
ROAD NUMBER SPECIFIC FEATURES:
#702
-Santa Fe- on nose
DASH 9 SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21125
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Copper Rolled Foil - 0.005 Thick x 12 inch Wide x 30 inch Long
-1 Roll
Formed-Metal Handrail Stanchions Short 3/8 inches 0.95cm pkg(35)
HO SD70M - DCC & Sound - Union Pacific #4454
UP FEATURES:
UP lightning stripe scheme
Early SD70M body
Nathan K-3 horn
Air Dryer
Spare knuckles on rear pilot
Prime air filters
HTCR-II trucks
EMD low plow
Red sill stripe
GPS dome
Small can & Sinclair antennas
-Under Warranty- on cab
Late style fuel tank & breather piping
This release of UP SD70Ms depicts units from the first order, with early (non-flared) SD70M bodies in their as-built appearance. For later-era operations, a consumer-applied GPS dome is included.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - Great Northern Rack/ Trailer-Train Flatcar RTTX #501905
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO 19,600 Gallon Tank Car - Cerestar (NATX) #190153
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Built: BLT 11-99
HO MIL 3800 Covered Hopper - CP (Delivery Scheme)(6pk) #4
They are back, again! The famous Rapido 3800 cu.ft. Cylindrical Hoppers make a triumphant ~THIRD~ return with new road numbers and paint schemes!
FEATURES INCLUDE:
- Round-hatch or Trough-hatch design
- Correct Dofasco S-2 100-ton trucks
- Two body variations with 6- or 11-side panels
- Three brake equipment variations and optional additional air reservoir on NSC cars (if applicable)
- Etched running boards and brake crossover platform
- Factory-installed air pipes and coupler cut levers
- Finely molded plastic walkway supports and end cages
- Full separate air piping and brake equipment details
Ballast Bag - Coarse Iron Ore (21.6 in3)
Realistically model railroad track, crushed rock and stones.
Easy to use and colorfast.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OFOX #1720
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Coalveyor Bathtub Gondola - David Joseph (Multicolor 3pkg)
Road Numbers:
30990 (Blue)
30917 (Green)
30979 (Yellow)
FEATURES:
Die-cast chassis
Ready-to-run
Interior bracing
Removable coal load
AccuMate couplers
Brake detail
100-ton roller-bearing trucks
Fine scale wheels
Accurate painting and printing
These cars were usually run in blocks of 4-12 units, carrying
construction and demolition debris.
HO MLW M420 - DCC & Sound - British Columbia (Two-Tone Stripe) #646
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO Code 83 Nickel Silver Rail Only - Weathered 3ft (33pk)
HO Bi-Level Auto Rack - UP Rack/TTGX Flat Car #981785
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO GMD SD40-2 - DCC & Sound - QNSL (Grey) #251
Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound Select decoder. Analog (DC) version has 21 pin socket for DCC module.
Bowser does not recommend LOK sound locos for use on DC layouts.
Features LokSound Select decoder, GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, Flywheels, Can motor, RP25 flange, KD couplers
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
HO Auto Scenes - Gradys Grader
Grady is re-banking side roads and spreading new gravel after a long, hard winter or torrential spring rain.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
N Scale RTL Turboliner - DCC & Sound - Amtrak (Phase III Late) Set #2
Road Numbers:
152, 173, 174, 175, 153
The Rapido N Scale Rohr Turboliner features:
Accurately designed using original blueprints and field measurements
Tinted windows, interior details and flicker-free interior lighting
Separate factory installed grab irons
Highly-detailed trucks including third-rail shoes
Working headlights, marker lights and cab-mounted strobe lights
Both Power Cars come with smooth, reliable drive systems for optimal performance
DCC models feature ESU sound decoders in each power car with accurate sounds sourced and remastered from original videos
All wheel electrical pickup. Yes, we mean every ... single ... wheel!
Rapido Trains Inc. is pleased to bring speed to the rails with the Amtrak Rohr Turboliner in N Scale!
In the early days of Amtrak, efforts were made to improve passenger services along key corridors. Following the success of the French-built RTG Turboliners in the mid-1970s in the Midwest, Amtrak turned to Rohr Industries in California to build modernized Turboliners for use along the Empire Corridor.
Entering service starting in September 1976, these new RTL Turboliners quickly proved their value, bringing passengers back to the rails. Equipped with third-rail shoes, they operated on electric power through New Yorks Grand Central Terminal (and later Penn Station), switching to gas-turbine power once out of New York City. Painted in Amtraks stunning red, white and blue Phase III paint scheme, they operated on most Empire Corridor services, as well as regular appearances on the Adirondack to and from Montreal in the early years. Occasional equipment needs even put the Turbos on other rare adventures outside their normal call of duty, including the Niagara Rainbow to Detroit via Southwestern Ontario, and the Maple Leaf to Toronto via Niagara Falls.
After nearly 20 years of service under their belts, Amtrak selected one RTL set in 1994 to be rebuilt into what would be called the RTL-II, incorporating several improvements including new turbines, a remodelled interior, a striking new demonstrator paint scheme, in addition to extending the lifespan of the set for several more years. While this set continued in service until 2003, no other RTL-II sets were ever commissioned.
Further redevelopments and improvements of the fleet into the RTL-IIIs was never fully realized, and all were retired from active service in 2004. Conventional equipment has since been utilized on the Empire Corridor services in place of the once mighty Turboliners.
Switch Machine With Rotating Target (Pkg12)
The RailCrew Switch Machine with Rotating Target is the only hidden switch machine guaranteed to turn heads after you install it on your layout. As well as the machine itself, it comes with three different WORKING injection plastic moulded switch stands and ten different photo-etched metal targets based on most major North American railroad designs. The target (and optional, non-working lantern – two styles) actually rotates just like the real thing. Yes, you read that correctly. The unit also comes complete with SPDT auxiliary contacts to power frogs and signals.
This innovative new product features:
Compact 1 1/8 Inch(28.5mm) diameter x 1 Inch (25mm) height
Easy to install on existing layouts
Museum-quality switch stands with rotating targets
Racor 17B (tall), 31B (tall) and 20C (low) switch stands ALL included!
Momentary 12V DC power – power numerous machines off of one power supply.
Strong enough to throw and hold the points but it wont break them
SPDT auxiliary contacts to power frogs and signals
Low-profile, compact design – its really tiny
Work with all layout types, including multi-deck and portable layouts
Available in singles, 6-packs or 12-packs
Switch stands and targets also available separately
HO EMD SD9 - DCC & Sound - Baltimore & Ohio #769
Baltimore & Ohio
- Correctly oriented cab interior for long hood forward operation
- Single fuel tank (First time done on a plastic model!)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO AutoFlood III RD Coal Hopper - GLFX #8099
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Atlas HO Scale EMD GP38, Gold Series- With ESU LokSound DCC, Norfolk Southern First Responders
Atlas Item #: 10002405
MODEL FEATURES:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional features included but not installed (GP-40s only)
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
SOUND & DCC FEATURES FOR GOLD SERIES:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
Prototype Overview:
In 1966 EMD introduced a new line of locomotives based on the 16-cylinder 645-series prime mover. The
40-series included a six-axle and four-axle model, the latter being the GP40. A total of 1,145 units were
produced between 1966 and 1972. These turbocharged 3,000hp locomotives were used primarily in road
freight service. The GP40 was a versatile locomotive that could be found across the US hauling drag freights
over mountain passes and leading high-speed intermodal trains across flat terrain. Three rooftop radiator fans
at the rear of the long hood differentiate a GP40 from its lower horsepower counterpart, the GP38, which has
two fans at this location.
Concurrent with GP40 production, EMD offered a lower horsepower, non-turbocharged locomotive based on the
same 645-series prime mover. The four-axle GP38 was rated at 2,000 hp and had the advantage of costing less
than the GP40. A total of 727 units were produced between 1966 and 1971 when the model was superseded.
The wheelbase of the GP38 was identical to that of the GP40. Both units shared the same EMD road-switcher
style body that was introduced with the GP35 in 1963. A desire for standardization caused the GP38 to share
the same wheelbase, frame and many external components as the GP40. The GP38 was purchased by large and
small roads alike. It was routinely found in local and road freight service throughout the US. Many GP38s and
40s are still in service today, either having been rebuilt or modified. A locomotive that has withstood the test of
time.
Many options exist on the Atlas GP38 and GP40 models. Some of these are: Long hood with or without dynamic
brakes, multiple fuel tanks, high or shoot hoods, and more.
7/16 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 7/16 inch
HO EMD GP7R - DC/DCC Ready - Chicago & North Western CNW #4193
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
CNW FEATURES:
NEW! Non-Dynamic with roof access hatches
1700-gallon fuel tank
Partial skirting above fuel tank
All-weather firemans side window
Flashing xenon strobe (in DCC mode only)
Wheel bearings per prototype
Era: 1982+
Era: 1993+
Era: 1982+
Chicago & North Western-
-Union Pacific Licensed Product
These Ex-CRI&P units were purchased by C&NW second-hand from Precision National in 1981, serving the railroad in a variety of service for the next 15+ years. 4160 became inoperable in 1998. In 2007 it was moved to the Illinois Railway Museum and repainted into the blue and white Rock Island paint scheme.
ROAD NUMBER SPECIFIC FEATURES:
#4140 Phase III body, 5-Chime Horn, Firecracker antenna, Front snowplow
#4160 Phase II body with 86inch Doors, 3-Chime Horn, Spark arrestors, Front snowplow
#4193 Phase II body with 86inch Doors, 5-Chime Horn, Front snowplow
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Kenworth T680 Sleeper-Cab Tractor - 53ft Dry Van Trailer - Con-Way Truckload
HO Vancouver Iron Works Piggyback Flatcar - Canadian National #688105
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
Brass Strip - 12inch x 2 inch x .032inch
Length: 12inch
Width: 2 inch
Thickness:0.032inch
N 33,900 Gallon - LPG Tank - GATX #218081
Multiple road numbers, unique numbers between singles and 3-packs
Three different body phases: early, flat panel, and late
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and brake wheel
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
Printed placards, where appropriate
Screw-mounted 100-ton roller bearing trucks
Machined metal wheels with RP25 contours
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Weighted for optimum performance
Operates on all popular brands of track
Minimum radius: 9 3/4 inch - Recommended radius: 11inch
UPGRADED FEATURES:
McHenry double-shelf couplers
Bent wire uncoupling levers
Rubber train line hoses
HO Etched Brass Cab Sunshades - E & F Unit Diesels (6pk)
Replace fragile plastic cab sunshades with durable A-Line HO scale brass etchings. Great for models that are handled often, shades are adjustable and include mounting instructions. Available in multiple styles, sunshades are available for virtually any locomotive or caboose.
85Ft RTR P-S Regal Series 4-4-2 Sleeper - Santa Fe (Regal Hunt) #64
Business Train (Real Metal Finish)
Non Lighted
Product Information
Passengers on your WalthersProto Combined Super Chief / El Capitan are sure to have a memorable trip aboard the 85Ft Pullman-Standard 4-4-2 Regal series Sleepers! Santa Fe purchased 16 of these spacious sleepers fitted with four double-bedrooms, four compartments and two drawing rooms for postwar Super Chief service, which were later used on other name trains and served with Amtrak. Ready for operation or display, features of this WalthersProto replica include:
Real metal finish simulates stainless steel
Correct GSC 41-NDO Outside Swing Hanger trucks as used in the 1960s
Factory-installed grab irons
Prototypically accurate window tinting
Window gasket details as appropriate
Sprung operating diaphragms
Modeler-installed extended drawbars for 22Inch radius curves included
Turned metal RP-25 wheelsets and correct trucks with built-in electrical contacts
Proto MAX metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24Inch radius is recommended for operation.
HO Enterprise 2-Bay Covered Hopper - New York Central (NYC Roman) #881842
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO RTR 85Ft General American G85 Flatcar - Railway Express Agency #3407
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24Inch
HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO EMD SW900 - LokSound 5 Sound & DCC - Milwaukee Road #600
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- ESU LokSound 5 sound for DCC and DC layouts
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
N Scale 150ft Modern Highway Overpass w/4 Piers
The Rix Modern Highway Overpass for N scale is modeled after the bridges built today to span over railroad tracks. This style of bridge is typical of most new construction and is used all over the country. The Rix Modern Highway Overpass consist of 50 foot spans which interlock together so that any length bridge can be built. The piers are designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy.
Dimensions: 150 x 25 scale feet
11-1/4 x 1-7/8 inches.
Includes: Beams, railings, roadway, and 4 piers.
HO NSC Ballast Hopper - Canadian National (Branchline) #90087
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO RTR 40ft OB Ballast Hopper/Load
Alaska Railroad No.14901
MODEL FEATURES:
Removable load
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied wire grab irons and brake wheel
Machined metal wheels
Weighted for trouble free operation
Solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 15in
PROTOTYPE AND BACKGROUND INFO:
Ballast hoppers are non-revenue freight cars that are owned by the parent railroad or leased from a construction company. These cars originate from a ballast quarry and shuttled via manifest freight or unit maintenance of way (MOW) trains to the right of way construction site. These cars can be seen together in long sets depending how extensive the project may be.
3/8 inch OD Round Stainless Steel Rod - 22 Gauge x 12inch Long
Round Stainless Steel Rod - Not hollow (1 pc)
Outside Diameter: 3/8 inch
HO RTR SD40T-2 - DCC & Sound - Ohio Central #4027
OHCR FEATURES:
Ex SP
Welded/removed gyralight nose
Modified L window cab
Unique rear stripe art per road number
ROAD NUMBER #4027 FEATURES:
Tall ditchlights
large plow
a/c
Cab mounted K-5 horn
Extended range dynamic brakes with exhaust silencer
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Separately applied air tanks
See through cab windows
Welded ECAFB
Photoetch windshield wipers
LED Lighting
HTC truck sideframes
All-wheel electrical pickup
See-through dynamic brake fans
-Mushroom- nose vent on right side
Separately applied wire grab irons
Fully assembled and ready-to-run
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox speific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body
Painted and printed for realistic decoration
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for troublefree operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Replacement parts available including motor brushes
Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard Econami Sound by SoundTraxx
Sound units operate in both DC and DCC
Sound units operate in both DC and DCC
All functions NMRA compatible in DCC mode
Full DCC functions available when operated in DCC mode
Some functions are limited in DC
Engine, horn, and bell sounds work in DC
Slow speed control
All functions NMRA compatible in DCC mode
CV chart included in the box
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
Spray Can - Park Green (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO NSC 60ft Ingot Flat Car - HPJX National Steel Car
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
N Scale 50Ft NACC Box - Alumax #50189
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
HO 50ft NACC Boxcar - Penguin Ginger Ale #7007
MODEL FEATURES:
- Three road numbers
- Applied metal grab irons and etched end platforms
- Pullman Standard or Superior plug doors
- Pullman Standard or Stanray (Superior) roof (to match prototype)
- Ready-To-Roll 70 ton trucks
- Machined 33 inch metal wheels with RP25 contours
- Body mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Minimum radius: 18 inches
HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4571
5inch stripe w/water expansion tank and ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
HO EMD GP7R - DCC & Sound - Chicago & North Western CNW #4160
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
CNW FEATURES:
NEW! Non-Dynamic with roof access hatches
1700-gallon fuel tank
Partial skirting above fuel tank
All-weather firemans side window
Flashing xenon strobe (in DCC mode only)
Wheel bearings per prototype
Era: 1982+
Era: 1993+
Era: 1982+
Chicago & North Western-
-Union Pacific Licensed Product
These Ex-CRI&P units were purchased by C&NW second-hand from Precision National in 1981, serving the railroad in a variety of service for the next 15+ years. 4160 became inoperable in 1998. In 2007 it was moved to the Illinois Railway Museum and repainted into the blue and white Rock Island paint scheme.
ROAD NUMBER SPECIFIC FEATURES:
#4140 Phase III body, 5-Chime Horn, Firecracker antenna, Front snowplow
#4160 Phase II body with 86inch Doors, 3-Chime Horn, Spark arrestors, Front snowplow
#4193 Phase II body with 86inch Doors, 5-Chime Horn, Front snowplow
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO 3200 Gallon Fuel Tank Set - EMD
HO Railroad Car Float - Kit
Product Information
Prototypes for the Walthers Cornerstone Car Float were used in many places where bridges were too expensive or impossible to build. These big barges feature a flat deck with up to three sets of tracks, allowing for quick movement of virtually any rail car over water. These -floating rail yards- were especially common in big city harbors and on many inland rivers, in many cases providing the only rail connection to the main line. Since they were unpowered, they required the services of a railroad tug to move them from point to point.
The basic design was used for decades, so many steam-era veterans lasted until the end of operations on most lines and several still operated into the 21st Century. This HO Scale kit builds into a detailed replica of a car float and is equally at home in the steam- or diesel era. For added realism, its designed as a waterline model with no lower hull. When finished, the Car Float appears to be floating in the water, making it much easier to add to new or existing scenery. Three plastic tracks are included (a common prototype practice). To model a float underway, add Walthers Railroad Tugboat (933-3153) available separately. As shown the Railroad Car Float measures: 39 x 5-1/2 x 1inch (99.1 x 14 x 2.5cm)
The Railroad Car Float is just one of a wide variety of Cornerstone waterfront industrial structures.
Molded in oxide brown plastic
Waterline (flat bottom) model fits easily in new or existing scenery
Three-track deck matches Car Float Apron (933-3068, sold separately)
Great alongside Railroad Tugboat (933-3153, sold separately)
Evergreen Scale Models 4062 .060in Opeque White Polystyrene Novelty Siding (1sheet)
RS-18u, DCC & Sound - CP Rail w/out Multimark #1839
Era:1986-1998
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
Bi-Level Auto Racks - BNSF Brown - Circle Cross Logo #300160
All are Ready-to-Run.
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene-
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage.
HO H21E 4-Bay Hopper - Pennsylvania (PRR Black, Plain Keystone) #748099
1961+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .50In x 14In (2 pcs pkg)
Woodland Scenics Static Grass 618 4mm Medium Green
HO #6 Manual Turnout - Left Hand - 34-1/8in (867mm) Radius Curve
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes! Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation.
Suitable for all types of layouts, temporary or permanent, this modular track system features an integrally molded roadbed for realistic appearance.
Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
HO Scale G2 AC4400CW - DCC Ready - CEFX #1002
Detailed Information
CEFX FEATURES:
Nathan K-3 Horn
Late body features
Late radiator lift rings
Evenly spaced rear grab irons
Engine air intake moved rearward
Notched fuel tank
Tank welded to underframe
Long handrail on left jogs over capacitor box
Double rail behind cab on left side
AAR style control stand
Electric air dryer
GE Hi-Adhesion trucks
Outside struts on opposite sides of trucks
Front ditch lights
The CIT Group placed two orders late in the production of the AC4400CW. They represent some of the newest features added to the AC4400CW line before its discontinuation. The first group was purposely built with Union Pacific features to whom they were originally leased. The second group was leased to the Canadian Pacific and share spotting features with late model CP AC4400CWs. Both wear CIT Groups distinctive -Blueberry- scheme with CEFX reporting marks.
ROAD NUMBER SPECIFIC FEATURES:
#1002
GPS Dome
High number boards
#1020
GPS Dome
High number boards
#1048
Sinclair Antenna package
Low number boards
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately ?painted and ?printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Trailer Train #91921
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Hawker-Siddeley Van - Caboose - Canadian National -As-Delivered (Red/Orange Steps) - #79253
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
HO EMD GP9 Phase II - DCC & Sound - Undecorated
Loksound 5 sound
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today. Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21mtc connector
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
A great starting point for a custom-build, features of this model include:
Dynamic w/48inch fan and nondynamic long hoods
Single fuel filler on sill
Drop steps
Footboards
8 styles of MU stands and receptacles
MU hose clusters front and rear
Ratchet- and Peacock-style handbrakes
Steam generator and piping
Pyle (early and late) and Mars dual-sealed beam headlights
See-through 36inch and 48inch fans w/separate blades
Roof-mounted air tanks and piping (-torpedo tubes-)
Rounded and Square winterization hatches
Harco, C&O, Super lifting and non-lifting and N&W-style spark arrestors
Folded-style cab window deflectors
Canvas and metal sunshades
Two all-weather cab windows
Blomberg Type B sideframes w/separate swing hangers and brake cylinders
Roller bearing, sloped, square and plain bearings
Separate speed recorder and Automatic Train Stop (ATS) shoe
Two styles of fuel tanks; 1200/600-gallon fuel and water and 1600-gallon
Golden Taklon - Detail Brush - 10/0
(Style 155)
- Approximate Length: 7 inches (175mm) including bristles
- Can be used in all kinds of paints: water, oil, enamels, varnish, lacquer, bronzes, etc.
Cleaning:
After using in water colors, simply clean with soap and warm water and shape to a point. If used in paints other than water colour, clean brush with thinner and wash out thinner with warm water and soap and shape. Allow brush to dry thoroughly before reusing in anything except water color.
HO Wooden Water Tanks pkg(3) - Plastic Kit
Product Information
Rooftop Wooden Water Tanks are as much a part of a city skyline as clouds! Look at any big city scene and youll see tanks perched on the roofs of all kinds of buildings. From downtown offices, stores and apartments, to grimy industries, this Walthers Cornerstone kit is a detail thats perfect for every tall building on your HO Scale layout. Detailed plastic parts look like real wood and are molded in colors. A separate roof and supports are also included. Each kit comes with parts for three complete wooden water tanks.
Three complete tanks
Easy-to-build plastic kit
Great detail for rooftops on larger buildings
Finished model measures:
4inch (10.1cm) Tall
2-3/8inch (6cm) Wide at Walkway
2inch (5cm) Wide at Base
HO Greenville 86Ft Double Plug Door Box Car - Norfolk & Western (Delivery 1-1978) #861499
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Norfolk & Western (NW) -Delivery 1978- replicates another major player in the world of Greenville 86Ft Boxcars. The NW rostered several Greenville series, but the 1978 order was the biggest. In fact, this 1978 B-138 class of 317 cars was the biggest Greenville order of any railroad. The bold NW graphics are almost understated on a boxcar of this size, but this paint scheme is one example that literally defines modern auto parts trains. The NW cars feature the correct late-Greenville body with 5 grab irons on each side along with body mounted brake gear. Those gorgeous 100-Ton -Low Profile- Barber S-2-C trucks show off the accurate rotating Timken bearing caps. SKUs -01 through -06 have January 1978 data and SLUs -07 through -12 have February 1978 data.
Acrylic Flat Colors - Flat Red - 3/4oz (23mL) Bottle
XF-7
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO Open Air Transload Building - Kit
Product Information
Cornerstone Series Open-Air Transload Building Combines Style And Function
The Walthers Cornerstone HO Scale Open-Air Transload Building makes it easy for customers to add a typical post-War freight transfer facility near their yard or team track. By the 1950s many railroads had outgrown freight houses and other facilities constructed in the early 1900s. The move to larger trucks for final cargo delivery also dictated a purpose-built transload. The kit features a large concrete loading dock, enclosed staging warehouse and sheltered dock. Its patterned after a Santa Fe prototype but is similar to others used across the continent and is a great destination for boxcars and flatcars. Its a natural for detailing with pallets, drums, sacks and forklifts (sold separately) and makes a great stop for way freights and switchers if you are into prototype operations. Use the Open-Air Transload Building among other Cornerstone HO Scale railroad buildings.
Easy-to-build plastic kit
Fits any North American steam or diesel-era railroad from the 1950s to the 1990s
Includes ramps, docks and canopies
Molded in appropriate colors
As shown the Open-Air Transload Building measures: 25 x 5-1/4 x 3inch (63.5 x 13.3 x 7.6cm)
Evergreen Scale Models - Opaque White Polystyrene Rectangular Tubing .125In x .250In x 14In (3 pcs pkg)
North American-Style - Code 83 #6 Turnout - Streamline - Right Hand, Unifrog
HO 1955 Ford F-100 Pickup - Santa Fe
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Rubber tires
32oz Shaker Medium Green
HO Canadian Winteriztion Hatch - Plastic
HO Trinity RAF 53C 5-Unit Spine Car Set - Trailer Train TTAX #555189 (5pkg)
Evans X72A Box car: Conrail w/ Small Logo - Single Car #229328
Detail Variations:
As operated between 1976 to the 1990s.
6-pack includes the following numbers:
#229023
#229199
#229328
#229377
#229493
#229844
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
Evans X72 Box car: Conrail Large Logo - Single Car #269252
Detail Variations:
As operated between 1976 to the 1990s.
6-pack includes the following numbers:
#266873
#266899
#269252
#269325
#269377
#269423
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
Alco RS-11, 2nd Run - Diesel Locomotive - DCC Ready - Delaware & Hudson - Lightning Stripe #5000
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
N Scale Straight Power Feeder (Terminal) Double-Track Section (2-7/16 Inches)(2pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
Tru Color Paint 096 - Acrylic -VIA Yellow 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
N Scale 50Ft NACC Box - Penguin Ginger Ale #7001
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
50Ft Berwick Box Car - Detroit Toledo and Ironton
#18807
MODEL FEATURES:
Ready-To-Run
Full under body detail with brake rigging
Overhanging X-panel roof
Non-terminating sine wave ends
Separately applied wire grabs
Detailed end ladders and brake gear
Accurate painting and printing
Blackened metal wheels
AccuMate couplers
Main Building: 12-1/2 x 9 x 9-3/8 inches 31.2 x 22.5 x 23.2cm
A very popular kit, the prototype was built in the early 1950s and is similar to those found in all parts of the country.
HO Scale Newspaper Stands - 5pkg
This is a package of 5 stands including graphics
Flexible Self Adhesive Paved Roadway Parking Lot
Model North American roads in minutes
Realistic surface color with correct striping for US roads in various eras
Ready to use, self adhesive and flexible - easy to add to new or existing scenery
Mix and match with other Roadway sections, each sold separately
HO 66ft Bulkhead Flatcar - Iowa, Chicago, & Eastern (ex-BC Patch) (6pk)
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
HO Scale H1a Hudson Steam - DCC & Sound - Canadian Pacific (Delivery) #2800
-Early walkway w/smoke deflectors
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
N 33,900 Gallon - LPG Tank - Procor #2 (3-Pack)
Multiple road numbers, unique numbers between singles and 3-packs
Three different body phases: early, flat panel, and late
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and brake wheel
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
Printed placards, where appropriate
Screw-mounted 100-ton roller bearing trucks
Machined metal wheels with RP25 contours
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Weighted for optimum performance
Operates on all popular brands of track
Minimum radius: 9 3/4 inch - Recommended radius: 11inch
UPGRADED FEATURES:
McHenry double-shelf couplers
Bent wire uncoupling levers
Rubber train line hoses
HO Lake Forest Cottage with Accessories - Kit
FEATURES:
- Perfect for steam or diesel-era layouts
- Traditional wooden design
- Walls and trim molded in two realistic colors as one complete part
- Makes a great summer cottage, modest suburban home of company house
- Simple assembly with minimal gluing
- Includes LED interior light
- Easy-to-build plastic kit requires minimal gluing
- Includes trellis, table, umbrellas, hedges, window boxes and chairs
- Printed interior window treatments
- Molded in five realistic colors and clear window glazing
MEASUREMENTS:
4-3/4 x 2-3/4 x 3-1/2 inches
HO RTR ACF 4650 3-Bay Hopper - Western Pacific #11753
(Feather Logo)
Date: BLT 5-82
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Chesapeake & Ohio C&O #5187
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO RTR ACF 4650 3-Bay Hopper - SOO Line #74177
Date: BLT 11-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO 50ft FMC Combo Door Boxcar - Burlington Northern #316216
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Weighted for optimum performance
- Minimum radius: 18 inches
- Body-mounted, McHenry operating scale knuckle couplers
- Fully assembled and ready for your layout
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Scale - Coupler Lift Bar with Brackets
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian National #621309
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
3/16In Acrylic Round Rod (20pcs)
This clear solid rod can be used for bracing, cabling, piping, or wherever round stock is appropriate. Also quite useful in crafts and educational projects. Precision Extruded in Clear Acrylic Plastic.
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
CLEAR
HEIGHT IN INCHES
1/8In
HEIGHT IN MM
3.2mm
LENGTH IN INCHES
8-3/4In
LENGTH IN MM
225mm
2-Pin Micro Connector - .098 x .06 x .12inch with 6inch Wire Leads (Black & White Wires)
This is a simple, two pin, 1 mm (0.039inch) pitch, micro quick plug wired connector. These amazing new micro connectors are nearly half the size of our popular, super-small Mini Connectors that we have offered for years. When connected together it is .098inch wide by .06inch tall by .12inch long, and it has 6inch long wires on both ends. This mini, quick plug connecter is ideal for hardwire situations where you may have to remove or disconnect certain components from time to time. This quick plug connector is also ideal for -Break Away- applications where connections to need to be broken easily for safety or convenience.
Each side of the connector has either a white and a black, red and black, or purple robotic wire (for polarity matching). The wire is 32 gauge, very flexible, and insulated with heat shrink tubing.
The Pitch (distance from center to center of the pins) is 0.039inch or 1 mm.
HO MLW M630 - DCC & Sound - British Columbia Railway BCR #721
Two tone green w/lightning stripe, Face mounted ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound V5 decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Early Red) #475008
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
HO EMD GP40 - DCC Ready - Canadian National (Stripes) #4013
1978+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Illinois Central Gulf Rack / Trailer-Train Flatcar TTBX #965654
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO 50ft NACC Boxcar - Dresser Magcobar #42999
MODEL FEATURES:
- Three road numbers
- Applied metal grab irons and etched end platforms
- Pullman Standard or Superior plug doors
- Pullman Standard or Stanray (Superior) roof (to match prototype)
- Ready-To-Roll 70 ton trucks
- Machined 33 inch metal wheels with RP25 contours
- Body mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Minimum radius: 18 inches
Fine Red Sable Brush - Size 1
HO Rotary Snowplow & F7B Locomotive - DCC Ready - Alaska ARR #3/#1503
ROTARY SNOWPLOW FEATURES:
Electrically driven motor to operate the rotary blades
Clear plastic cab and/or portal windows
McHenry operating scale knuckle couplers on rear of the snowplow
Highly-detailed, injection-molded body
Fully-assembled and ready-to-run out of the box
Painted and printed for realistic decoration
Highly-detailed, injection-molded body
Minimum radius: 18inch
Recommended radius: 22inch
F7B LOCOMOTIVE FEATURES:
5-pole motor with precision-machined flywheels and multi-link drive train for trouble-free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Heavy die-cast frame for greater traction and more pulling power
Clear plastic portal windows
McHenry operating scale knuckle couplers
DCC Ready 21 pin plug
Machined metal wheels with RP25 contours
Fully-assembled and ready-to-run out of the box
Painted and printed for realistic decoration
Highly-detailed, injection-molded body
Minimum radius: 18inch
Recommended radius: 22inch
Enamel Product.
The perfect wash for aircraft engines. You can highlight details easily with this color. Just shake well before use and you can apply it directly to your model to create depth in the details. This is a enamel product and can by dissolved using our white spirit or ODOURLESS TURPENTINE. We recommend that this product is applied to surfaces that have been painted or varnished with acrylic paint.
HO RTR 52Ft Mill Gondola - Rock Island #680132
Detailed Information
MODEL FEATURES:
Body-mounted McHenry operating scale knuckle couplers
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Razor sharp painting and printing
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Orange) #505591
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
CMX - N Scale - The Clean Machine
The best rail cleaning system for any scale!! When used as directed, the CMX Clean Machine will clean your track better than any other method available!
FEATURES:
- Precision Machined Parts
- Solid Brass Construction
- Non-unraveling pads
- Easy Fill Design
- Leak proof valve and fill port
- Heavy weight does the job
- Quick Change Pads
- Drag pads wont catch on switch points, frogs, and any other pieces of trackwork
- Spill resistant design
- Solvent proof design
- Both solvent/abrasive options
- Large reservoir
- Multi-directional (push or pull)
- Controllable dispensing rate
Check out the additional CMX parts on our website!
HO GP40-2 - DCC & Sound - ONT #2200
Detailed Information
ONT FEATURES:
Ex-B&M
Corrugated grilles
Non-dynamic hatch
Front and rear ditch lights
Side-mounted hood bell
M3 horn on long hood
Blomberg M trucks
Large fuel tank
Large front anticlimber
Small EMD front plow
Lit number boards and class lights if equipped (effect in DCC)
The Ontario Northland Railway is operated by the Ontario Northland Transportation Commission, part of the government of Ontario, Canada. Purchased in 2005, these ex-BM GP40-2s were repainted into this bright and vibrant scheme. A few kept their nose class lights after rebuild. The units have been seen operating in both freight and passenger service.
ROAD NUMBER SPECIFIC FEATURES:
#2200
Ex BM 311; class lights
#2201
Ex BM 300; removed class lights from nose
#2202
Ex BM 304; nose class lights only
GP40-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - Chicago, Burlington & Quincy Rack/ Trailer-Train Flatcar TTKX #905083
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers
Woodland Scenics Figures HO Campers - Scenic Accents(R) -- With Tent & Accessories
The UPS Store
- Three contemporary stores in one compact structure
- Perfect addition to any modern street scene
- Use alone of combine with kits to model a bigger shopping center
- Full color signs for a variety of businesses
Optivisor AL - Complete Set - w/#7,5,4,3 Lens Plates
OptiVISOR is a precision binocular headband magnifier which permits unrestricted user efficiency while reducing eye strain?leaves both hands free and allows three dimensional vision. Used by anyone whose profession or craft requires close accurate work. Can be worn over prescription or safety eyeglasses.
Binocular magnifier with acrylic lens plate. Includes OptiVISOR with #7, #5, #4 and #3 lens plates.
HO 53ft Railgon Gondola - Railgon/GONX #310570
(as-built; black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO AutoFlood III RD Coal Hopper - PGNX #1119
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Layout Control System - Two Color LED Fascia Indicator (Red, Green)
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
#144 Standard Head All-Metal Whisker(R) Self-Centering Knuckle Couplers Short Underset Shank 2 Pair
All-metal -whisker- coupler with metal self-centering spring. Designed and tested for reliability, durability and long life. Compatible with Kadee HO couplers. Fits most HO scale equipment; can be used in place of No. 5 coupler.
HO EP-5 Electric Loco - DCC & Sound - New Haven, Repaint #372
Detail Variations:
Repaint Scheme With Vents
FEATURES:
- Accurately scaled from prototype blueprints
- Period-correct detail options, including carbody, pantograph and hardware variations
- Accurate paint and lettering
- Several road numbers per paint scheme (where applicable)
- Full cab interior
- New Haven delivery and repaint schemes (repainted units have smaller NH logo on nose and re-positioned/larger nose road number)
- Directional operating pantographs (sound models only)
- DC/Silent or DC/DCC/Sound versions available
- DC/DCC/Sound version features an ESU Loksound decoder with accurate -Jet- recordings
- Complete lighting package including headlights, class lights, ground lights and cab interior lighting
- Factory-installed MacDonald-Cartier metal couplers
7 x 4-1/2 x 3-1/2 inches
Whether it is for storage at a feed mill or for transferring bagged cement at a building supply lot, the Co-Op Storage Shed is a perfect addition along any siding in any era. This easy-to-build model features box car and truck loading doors, plus realistic printed signs.
HO Dash 8-40CM - DCC & Sound - Quebec North Shore & Labrador: QNSL #403
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
50Ft Smooth HC Plug Box - BNSF/Round Logo #712702
Detailed Information
MODEL FEATURES:
Former MDC tooling
Brand new paint schemes
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Separate brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister safely holds model for convenient storage
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of -In Service- equipment; -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per road number matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
N Scale Flexi Flo Hopper (Late) - Conrail (Billboard Repaint) #897700
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
Evergreen Scale Models 4060 0.60in Opaque White Polystyrene V Groove Siding (1sheet)
HO Ramones Storage and Salvage - Cast Hydrocal Kit
DIMENSIONS:
13 x 10 x 7 inches
33 x 25.4 x 17.8cm
Ramones Storage and Salvage from Downtown Deco is one part American Pickers, one part Hoarders. This HO Scale old warehouse kit is a perfect place to showcase the leftover detail parts that you have acquired over the years. It features all new hydrocal patterns, 70+ detail parts (vehicles and figures not included), full color assembly, painting & weathering instructions and a really cool custom decal by Daves Decals. It can also be assembled as a three foot long background flat. The kit features detailed cast-hydrocal walls and simple construction.
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
N Scale 50ft Plug-Door Track-Cleaning Boxcar - Conrail #229657
FEATURES:
- Silver Series Rolling Stock ? Fully Assembled
- Highly Detailed Painted Bodies with Precision Graphics (where applicable)
- Blackened Machined Metal Wheels with RP25 Contours, Magnetically Operated E-Z Mate Couplers
- Non-magnetic Blackened Brass Axles with Needle-point Bearings, Celcon Trucks
- Added Weight for Optimum Tracking Performance
- Track-Cleaning Replacement Pads, item #16999, also available
Atlas Trainman HO
2 Bay Off set Hopper with Flat Ends Canadian Pacific #357017
Model Features:
- Scaled from field measurements & diagrams of a GO F59PH
- End metal handrails with plastic stanchions
- Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
- All-metal etched grilles
- Full cab interior
- Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
- Operating headlights, rear light, and ditch lights
- GO units feature functioning tri-color class lights (white, green and red)
- American units feature functioning red marker lights
- Accurate sounds recorded from a GM 12-710G3A
- DCC/Sound units come equipped with an ESU LokSound decoder
HO MLW M420 - DCC & Sound - Delaware-Lackawanna #2045
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO 50Ft FMC 5077 Double Door Box - Southern Pacific SP #246021
MODEL FEATURES:
Separately applied grab irons, end ladders and brake wheel
Photo-etched cross-over platform
33inch machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO EMD FT A+B Set - DC/DCC/Sound - AT&SF (Freight Scheme) #103 + 103A
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO 26Ft Can-Car Dry-Van Trailer - Simpsons #T412
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
HO NSC Ballast Hopper - Canadian National (Maintenance Scheme) #302009
1976+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
Lovers in Action on Bed #1
HO RTR 40Ft Single-Door Steel Boxcar - Delaware & Hudson (Bridge Line Logo) #19685
(yellow, blue)
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. Check out the entire line of Bowser HO Scale ready-to-run boxcars.
Athearn Roundhouse HO 50ft ACF Boxcar Ferrocarril del Pacifico #17729
Detailed Information
MODEL FEATURES:
70-ton Roller Bearing trucks with 33in wheels
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Body mounted McHenry operating scale knuckle couplers
Wheels with RP25 contours operate on Code 70, 75, 83, 100 rail
Minimum radius: 18in
Specifications
COUPLER STYLE: McHenry Scale Knuckle
HO 40Ft PS-1 Boxcar - Ann Arbor (Direct Route) #1406
Date: BLT 4-57
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
Road Number Specific Details:
#1401, 1405, 1406
Have Pullman 8Ft Raised Panel Door
#1402, 1404, 1409
Have Pullman 8Ft Corrugated Door
HO MLW M420 - DCC & Sound - Providence & Worcester (As Delivered) #2001
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Santa Fe Rack & Flatcar #88036
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO Scale G2 SD90MAC Diesel - DCC Ready - Canadian Pacific #9112
Detailed Information
CP FEATURES:
CP-specific cab and access doors
Front only ditch lights mounted above the walkway
As per prototype, ground light only on engineer side.
Raised walkways for snow management
Dual trainlines
No blue flag holders on engineers side of cab
CP Golden Beaver paint scheme
Canadian Pacific purchased 60 SD90MACs with delivery beginning in 1998. Their purpose was to pull freight between Ontario and British Columbia. The entire fleet has been rebuilt into SD70ACus as of 2020.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
RTR 67Ft Trinity 6351 4-Bay Covered Hopper - CHSX #580133
(gray, blue CHS Logo)
Expected Delivery: August 2020
Product Information
Expand grain traffic in minutes with layout-ready WalthersProto(R) 67Ft Trinity 6351 Four-Bay Covered Hoppers! Introduced in the early 2000s, these large-capacity cars are industry favorites for handling dired distillers grains (DDG), malt and many other food products. Other features of these HO Scale replicas include:
Limited edition - one time run of these roadnumbers!
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct 36Inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 40Ft Fruehauf Fluted Side Volume Van w/ Side Door - Silver/Unlettered
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
HO Chemical Tank Car - UP #69606
MODEL FEATURES:
- Separately applied brake wheel
- Wire form safety handrails
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Machined metal wheels with RP25 contours
- Highly-detailed, injection-molded body
- Minimum radius: 15 inch
- 3-packs feature unique road numbers
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
HO - 4750 Cubic Foot Rib-Sided - 3-Bay Covered Hopper - Illinois Central - #765858
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-Etched Metal Roofwalk
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO Concrete Block Walls - 14-1/2 x 9-1/4Ft Scale - short sections 4 each
Product Information
Molded in gray plastic, use to create warehouses, gas stations, garages and other concrete structures. Measurement is in HO Scale feet.
Drill Bit #56 - 0.047inch Diameter (2 pkg)
Product Information
Walthers Drill Bits are the right tools for all kinds of hobby projects, from detailing locomotives and cars, to scratchbuilding, wiring and more. Theres a full range of common wire gauge - jewelers drill bit sizes from number 80 to 43, and each pack includes two ready-to-use bits. Walthers miniature hardware is a complete range of ready-to-use parts and tools for hobby projects, including wood, machine and nylon insulating screws, plus appropriate hex nuts and washers, in assorted standard sizes (machine and wood screws may be brass or brass plated). Drill Bits are part of the line of Walthers miniature hardware and tools.
HO GP18 - DCC & Sound - Grand Trunk Western #4707
Detailed Information
GTW FEATURES:
Winterization Hatch
Beacon
Bell mounted on long hood end
Sinclair antenna
Separate, optional ACI labels
Canadian style handrails
Separate, optional spark arrestors included with model
These units were part of an 8-unit order that arrived on the GTW in February 1960. They were part of the general freight pool of locomotives and were often seen working with their GP9 predecessors.
GP18 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Accurately-painted and printed paint schemes
Body-mounted McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO Blunami BLU-PNP8 - 8 Function Bluetooth Controlled Sound Decoder - ALCO Diesels
Blunami will change the way you enjoy the model railroading hobby! The BLU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturers diesel models such as those made by Atlas, Athearn, and Intermountain Models. It is suitable for a wide variety of models from HO to S scale. It can be operated in three different ways: DC, DCC, and Wireless mode. Using the Blunami App, you can operate your locomotive incredibly easily.
Need Help Choosing a Sound Profile?
We have tons of sounds to match a wide range of locomotives. So many, in fact, we cannot fit them all on one decoder. Therefore, they are broken up into sound profiles of like sounds (EMD, GE, ALCO, etc.). If you do not know which sound profile you need, the best place to start is the Sound Selection References. These will list all the prime movers or exhaust chuffs available on each sound profile.
DYNAMIC DIGITAL EXHAUST :
For added realism, you will love our reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to create the most realistic experience possible.
HIGH-QUALITY SOUND LIBRARY:
Our large selection of sound effects includes:
- Up to 12 Prime Movers in each sound profile
- Up to 12 Bells
- 40+ Airhorns
- Additional couplers, cab chatter, and more!
ADDED REALISM:
Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, and more.
EASY INSTALLATION:
This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.
This 2-amp, universal-style format includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.
Dimensions: 74 x 17 x 5mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 8
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7V ? 22V
Sound Channels: 16
HO C-20 ICC Caboose w/Lights - DCC & Sound - Norfolk & Western #500850
ETA: April 2022
Detailed Information
The ultimate detail with the best Genesis features.
International Car Co. began specializing in caboose production as early as 1941. When the railroads entered the 1960s, many needed to replace their aging, in some cases home shop built, cabooses. International Car responded with a product that could be tailored to each railroads specific needs. Using quality components and modern engineering, ICC became a leading name within the industry.
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
NW FEATURES:
N&W C-20 Class caboose
N&W Blue scheme with -Hamburger- style logo
Friction Bearing Trucks
Air horn (Functions in DCC)
Propane tank and basket
Functioning interior lights in DCC
ICC CABOOSE FEATURES:
Better than brass detail including roadname and road number specific detail and laser-sharp painting and printing
Interior seating for the addition of crew figures.
See-through end platforms and steps
Flush window glazing
Wire-form grab irons
Caboose trucks with animated rotating bearing or static friction bearing caps
Axle generator details
Body-mounted McHenry scale knuckle-spring Couplers
Machined metal RP25 profile wheel sets
Fully-assembled and ready-to-run out of the box
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Separate wireform grab irons, etched metal coupler platforms
Coupler lift bars, trainline hoses, brake hoses, and hardware
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Weighted for trouble-free operation
Multiple road numbers
Minimum radius: 18inch
LED LIGHT EQUIPPED FEATURES:
LED lighting for long life and reliable operation
On-board DCC Decoder by NCE – Operates in DCC and Analog (DC) with lighting functions controllable in DCC
Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
(not all cars have marker lights)
LED Interior Lights
All functions NMRA compatible in DCC mode
SOUND EQUIPPED MODELS ALSO FEATURE:
Soundtraxx Tsunami SoundCar decoder w/ included sounds:
Air horn or conductors whistle as appropriate
Clickety-clack with optional wheel flat spot sounds
Brake set/release sounds including retainers and brake squeal
-Big Hole- emergency brake application sound
Handbrake tie-down/release
Adjustable flange squeal
Air, horn, and bell sounds work seamlessly with Soundtraxx locomotive sound decoders
Supports Advanced Consisting in DCC
Full DCC functions available when operated in DCC mode
All functions NMRA compatible in DCC mode
HO 50Ft PCF B70 Boxcar - w/ Superior Doors - SSW/Cotton Belt #67311
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
Wabco-Type Single-Chime - Air Horns (2)
Details West HO Scale locomotive Air Horns are based on those used on locomotives and cab car rooftops. Available in several designs to match a variety of prototypes, each part is a detailed brass casting.
Atlas HO 20004689 Matson 45 Ft Corrugated Container 3pk
HO Bi-Level Auto Rack - CSX/TTGX Flat Car #979135
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO RTR 52Ft Mill Gondola - Rock Island #680149
Detailed Information
MODEL FEATURES:
Body-mounted McHenry operating scale knuckle couplers
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Razor sharp painting and printing
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.250 (10pcs pkg)
Peterson Tool Specialty
Modern addition to any industrial park
Typical of industries built from the 1960s to the present
Simulated steel and concrete construction
Railcar loading doors
Colorful signs
Modernize your industrial park with this impressive building. With its steel and concrete construction, it can be used for almost any type of manufacturing operations. Sized to fit most layouts, the modular design makes it easy to construct a larger building by combining kits.
Since todays industries depend on trucks and rail service, the kit includes doors and equipment for various types of loading docks. Large doorways for railroad cars make for interesting switching and can be adapted to hide an opening in your backdrop, or to model loads-in, empties out operations. The kit includes ground level truck freight doors (with a sloped ramp) along with conventional raised dock doors the same height as a trailer floor. Out front there is an office area and a set of colorful signs are provided for the finishing touch.
HO Intermountain 4-Panel Coalporter, Canadian National
CNA Website scheme
Features:
Sharp Painting and Lettering
Prototype Accurate Paint Schemes
Multiple Road Numbers
InterMountain 100 Ton Trucks with 36in Metal Wheelsets
Metal Knuckle Couplers
Tangent Scale Models PS4750 Covered Hopper- MKT- Original 12-1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
MKT Original 12-1979 in the eye-catching green scheme with the large yellow MKT painted on the flanks of the car. Like our BN models, the Tangent PS4750 is the only model on the market to match MKTs one and only order of PS4750s, from the jacking pads, brake system, roof hatches, etc. Check out the prototypical Ellcon-National Peacock D-1600 hand brake and the Brenco-3 style rotating roller bearing caps!
HO 40Ft High Cube Outside Braced Boxcar - Southern Pacific #659110
HO GP7 - DCC & Sound - Bangor And Aroostook #63
BAR FEATURES:
- Winterization hatch
- Bell mounted on short hood
- Sloped pilots with footboards
- Large fuel tanks
- Square MU boxes with pipe bases and dual receptacles
BAR was an early supporter of EMDs road switcher concept, purchasing 12 GP7s in late 1949 and another 4 in 1952. Starting in the early 1960s, the units were repainted in a simplified solid blue scheme. The former BAR 73 was selected in 1975 to receive a colorful scheme of red, white, and blue to commemorate the nations Bicentennial. The unit carried the name Jeremiah OBrien, a Maine patriot, and a new number, 1776. The BAR GP7s were true travelers, being leased to the PRR starting in 1951 to assist with summer ore traffic, an agreement which lasted through the Penn Central era. They were also leased to the LV and LIRR to assist with power shortages on those roads.
LOCOMOTIVE FEATURES:
- Coupler cut levers
- Trainline and MU hoses
- Drop steps unless noted
- MU stands
- Nub style walkway tread
- Windshield wiper
- Lift rings
- Wire grab irons
- Windshield wipers
- Sander lines
- Bell placement & type per prototype
- Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
- Blomberg-B trucks with appropriate bearing caps
- Speed recorder unless noted
- See-through cab windows and full cab interior
- Fine-scale Celcon handrails for scale appearance
- Etched metal radiator intake grilles and fan grilles
- Air tanks mounted below sill unless noted
- Body-mounted McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18inch
SOUND EQUIPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO Walton & Sons Lumber Company - Kit
Product Information
The Walthers Cornerstone HO Scale Walton and Sons Lumber Company is a great trackside business in any size city or town. Local lumber yards receive all sorts of building materials in boxcars and aboard flatcars. A great destination for steam- or diesel-era wayfreights, this model builds into a typical operation that fits almost any available space. The storage buildings, which protect lumber from the weather, are designed so that you can build one large, covered building, or two free-standing, open-sided buildings. Theres a small office to handle the paperwork, which can also be placed along a busy street and used as a store and showroom. Lots of colorful sign decals for Walton and Sons Lumber Company and other business names brighten up the operation, and complete instructions make for fast and fun construction. Walton and Sons Lumber is one of many Cornerstone HO Scale industry kits.
Realistic wood-textured plastic walls
Build as a single enclosed building or two open-sided bins
Decal signs
Molded in appropriate colors
Finished Walton and Sons structures measure:
Main Storage Building (Closed Structure): 9 x 9 x 4-1/2inch (22.5 x 22.5 x 11.2cm)
Office: 3 x 4-1/2 x 2-1/2inch (7.5 x 11.2 x 6.2cm)
GP39-2 - DCC & Sound - SOO/ Red #4599
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes here at Athearn! We are excited to introduce some new, often requested features, to the GP39-2 and other upcoming Genesis models.
SOO FEATURES:
Phase II GP39-2
Early exhaust stack
Welded cab side panels with armrests
Long hood mounted Leslie S-3 horn
Illuminated Xenon strobe, effect w/ DCC+Sound
3-Pane all weather cab window on engineer side
81 Inch nose with ratchet brake
Front anticlimber, rear drop step
2900 gallon fuel tank
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PROTOTYPE SPECIFIC INFORMATION
In the decade between 1974 and 1984 , EMD produced the GP39-2 for seven North American railroads. The basic design followed most four axle road diesel switchers for the time. Borrowing improvements from the GP38-2 and GP40-2 designs, this mid-horsepower road switcher utilized a turbocharged 12-cylinder EMD 645E3 diesel engine for it’s prime mover. With 4 fewer cylinders, the smaller engine provided a distinctive long hood on the phase II and phase III bodies, where the clean room/engine compartment doors were set back from the cab further than predecessor locomotives.
Sensitivity to fuel economy in the 1970s justified the GP39-2 in the locomotive market. It also laid the ground work for EMD to start exploring locomotive designs that utilize engines with larger piston displacement yet posess fewer cylinders. This approach has become the foundation to modern locomotive technology.
HO 26Ft Can-Car Dry-Van Trailer w/ Side Door - CN Piggyback #260132
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
HO 1950s Sedan - Police
MODEL FEATURES:
- Factory assembled with detail parts applied
- Molded interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
- Beacon or taxi sign where appropriate
HO High Cube DD Plug Box - BCOL #100427
MODEL FEATURES:
Separately applied brake wheel
Underbody with brake system details
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
N Scale 50Ft NACC Box - Alumax #50192
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
German Gray Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
Intermountain - N 4750 3 Bay Hopper - CN/ Chicago Central
Coupler Type Intermountain Magnetic Knuckle
Wheel Type Chemically Blackened Metal
Wheel Profile Small Flange (Low Profile)
HO - 89ft Thrall Bi-Level Auto Carrier - Ready To Run -Ferromex
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6inch (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
Factory-installed grab irons
Separately-applied ladders and brake equipment
Ultra-smooth rolling metal axles with 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24inch radius is recommended for operation.
Evergreen Scale Models 4125 .125in Opaque White Polystyrene V Groove Siding (1sheet)
HO B-50-15 Boxcar - As Built w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #15393
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
1/4 inch OD Round Stainless Steel Rod - 22 Gauge x 12inch Long
Round Stainless Steel Rod - Not hollow (1 pc)
Outside Diameter: 1/4 inch
HO 89Ft Bethlehem Flush-Deck Flatcar - TTX RTTX #156238
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers
HO Scale H1a Hudson Steam - DC/DCC Ready - Canadian Pacific (Delivery) #2800
-Early walkway w/smoke deflectors
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO U33B - DCC/Sound - Conrail #2896
FEATURES:
- Flush-mounted radiator screens and air intake screens on the long hood - early phase
- Built-out area on the top of the front and rear pilots - early phase
- Corrugated radiator and air intake screens, with a flat pilot face - late phase
- Optional separate electrical equipment box will be included on the left side walkway behind the cab per the prototype
- AAR-B or Blomberg trucks will be used when appropriate
- Separately-applied detail parts including: windshield wipers, metal grab irons, coupler cut levers, fine scale handrails & more!
- Five pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Directional lighting with Golden-white LEDs
- Blackened metal wheels
ATLAS MASTER GOLD (DCC/SOUND):
- ESU LokSound decoder, supporting all DCC programming modes
- Flexible mapping of function keys F0 to F31
- Follows all NMRA DCC standards and recommended practices
- Lighting effects to match the prototype, including Gyralight and Mars light where appropriate
- Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
HO 33 Inch Semi-Scale Insulated Brass Wheelsets (12/pkg)
Nickel Silver Plated Brass Insulated Wheelsets
These wheels follow NMRA RP-25 Standards.
One wheel is insulated from the all-metal axle.
The entire wheelset is non-magnetic.
The axle length is 1.006in (+- .004in)
28in wheels are used on modern Tri-Level Autoracks, some Bi-Level Autoracks, and some older intermodal cars such as Impack spine cars, front runners & four runners - check your prototype.
33in wheels are used on 50 & 70 ton capacity cars (CAPY approximately 150,000 LBS or less).
36in wheels are used on 100 ton capacity cars (CAPY approximately 200,000 LBS), and on all passenger cars no matter the era.
38in wheels are used on 150 ton capacity cars, primarily the center connection trucks on modern intermodal cars with 33in wheels at the coupler ends.
(Cabooses can use either 33in or 36in wheels depending on the prototype.)
The CAPY information is typically printed on model freight cars and can be used as a guide. Some cars have the wheel size printed on the sides or ends of the car in the data. If you are ever unsure of which size to use, you can simply replace the wheels currently on the car with the same size.
Wheel diameter can be measured with a caliper:
28in wheels measure (28/87.1=.321in) in HO scale.
33in wheels measure (33/87.1=.378in) in HO scale.
36in wheels measure (36/87.1=.413in) in HO scale.
38in wheels measure (38/87.1=.436in) in HO scale.
(87.1 = HO scale to prototype ratio. HO scale is 87.1 times smaller than the prototype).
N Scenic Accents - Farm People w/Goose (7pcs)
Bring your layout to life with N scale Scenic Accents figures and accents that tell your layout story with authentic detail.
A set of six people and a goose. A little girl is teasing the goose, a boy is pulling back his slingshot, a woman is hoeing the garden, a man is carrying a feed sack on his shoulders, and another is carrying a basket of vegetables.
HO FCA 52ft 100-Ton Bulkhead Flatcar - CWLX #200031
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2016 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
HO SD60M Wide Cab Diesel - DCC & Sound - Buffalo & Pittsburg #3887
Expected in May 2022
Detailed Information
BPRR FEATURES:
Genesee & Wyoming Paint
Ex-CR
Small plow
Small GPS dome
CSX-style -Ice Skate- antennas
5-chime horn
Around 2020, Genesee & Wyoming, the parent company of Buffalo & Pittsburg, purchased several ex-CR SD60Ms from some second-hand leaser companies to provide more reliable power for their operations. They often run in solid sets of 3 or more.
ROAD NUMBER SPECIFIC FEATURES:
• #3887
Black cab roof
forward ditch lights
speed recorder
5-chime horn
small GPS dome.
• #3889
White cab roof
forward ditch lights
5-chime horn
small GPS dome.
• #3890
White cab roof
forward ditch lights
5-chime horn
small GPS dome.
LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully-assembled and ready-to-run
Replacement parts available
Minimum radius: 18inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Cat M318D Wheel Excavator
These detailed, licensed replicas feature authentically decorated diecast bodies with injection-molded details. High Line Series models come packaged in a colorful and descriptive metal box. The models are encased in die cut foam inserts for protection.
MODEL FEATURES:
- Main body swivels 3600
- Boom raises and lowers
- Outriggers and dozer blade raise and lower
Perfect for your track-side construction scene, or for use as a heavy duty flat car load!
Plastruct 90023 ABS I Beam 1/8
1/8 x 15in
.32 x 38.1cm pkg(7)
SN2AB - N Scale Mainline Signaling Kit
N scale Mainline Signaling Kit including:
- 2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws.
- Makes all of your signals plug n play with small 10 pin connectors.
- Can be used as a basic N scale signal.
- Mounting board and hardware included.
- Current setting resistors are built in to the board.
- Easy mainline setup with A and B mast configurations.
- Pads are provided to make it easy to attach any signal to the mast base.
- This product is intended for use with the SE74.
The Digitrax Plug N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE74 signal driver cable.
This product is intended for use with the SE74 and other Digitrax signaling decoders.
Coupler Trip Pin Pliers
For HOn3, HO, S, On3 & O Scale Couplers. Adjust trip pin to the correct height by gently squeezing with these specially designed pliers. The pliers have jaw surfaces that are curved and smooth. Adjusting the height of your Coupler Trip Pins is easier because the pliers surfaces conform to the bend of the trip pins and prevent them from kinking when bending or straightening.
HO 4650 Centerflow Hopper BNSF
The Atlas HO Scale ACF(R) 4650 3-Bay Centerflow Covered Hopper is based on cars built by American Car & Foundry (ACF) in the 1960s, with another production run in the 1970s, these large capacity covered hoppers are used to carry grain, salt, dried kaolin clay, sugar and other bulk materials that have to be protected from the weather.
These HO models include etched-metal, see-through roofwalks, detailed brake gear, authentic 100-ton roller bearing trucks with blackened metal wheels and body-mounted Accumate(R) couplers with screw-attached coupler pockets. Undecorated models come with optional parts for three different types of loading hatches and two styles of discharge outlets. ACF(R) 4650 3-Bay Centerflow Covered Hoppers come prepainted and lettered in a variety of railroad-owned schemes with details appropriate for the early (pre-1971) or late (post-1971) production.
HO Duplex Sleeper - Amtrak - Phase I #2402
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO NSC Ballast Hopper - Canadian National (Branchline) #90040
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO EZ Track - Steel Alloy w/Black Roadbed - Figure 8 Track Set
Includes all the steel alloy E-Z Track you need to create a complete 76 x 39 inch figure 8.
Set contains:
- 30 degree crossing track
- 21 pieces of 18 inch radius curved track
- 18 inch curved terminal rerailer
Mini-Junior Hack Saw Replacement Blade - 15 TPI (3 pkg)
6inch Long x 5-3/4inch Between Pins, 1/4inch Wide, .015inch Kerf,
15 TPI Fits 795-35600
Assembled
The Woodland Scenics(R) Grillin & Chillin Trailer features a large front deck with an awning, trashcan, a TV antenna for entertainment on rainy days and a window air conditioning unit for beating the summer heat. This Built-&-Ready Landmark Structure comes with a printed interior and two LED lights. The installed LED lighting is designed for use with the Just Plug(R) Lighting System. 50mA current draw.
Lichen - Dark Green (86.6 in3)
This natural product is a longtime favorite of hobbyists. Its unique texture realistically blends easily with other foliages. It is non-toxic, non-flammable, and hygroscopic.
Use for any scale to model bushes, moss and other ground cover, or use as tree foliage to model quick and economical tree masses. Lichen is available in five solid colors and three mixes. Attach to Tree Armatures with Hob-e-Tac(R). Attach to layout with Scenic Glue(TM).
Canadian Pacific Power In Color, Volume 3: Covered Wagons - by Stephen M. Timko
RELEASED: October 1, 2022
AUTHOR: Stephen M. Timko
128 Pages, All Color
The midpoint of Canadian Pacific (and CP Rails) locomotive fleet, featuring covered wagons, constructed by GMD, Alco, MLW, and CLC, illustrated with over 335 photos of both A and B units used in both passenger and freight service. The three rare EMD E-8s, the only ones owned by a Canadian railroad, are featured along CLCs FM-Designed CPA/CPB16-4 and CFA-CFB16-4 units. The Royal Canadian Pacific F-unit are included as well.
All Scale Flexi Loco Lift - Single
The Peco single unit Flexi Loco Lift is the replacement for the SL-43 Loco Lift. This device allows you to run the locomotive directly on and off the track. Works with HO, TT, HOn3, HOn30 and N Scale track and trains.
MU Hoses -- Four-Hose w/Bracket pkg(2) (One Left, One Right)
RTR 50 Ft NACC Box - DM&E #5536
MODEL FEATURES:
Three road numbers
Applied metal grab irons and etched end platforms
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Weighted for trouble free operation
Ready-To-Roll 70 ton trucks
Machined 33In metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Minimum radius: 18In
HO ACF 5250 4-Bay Covered Hopper - ARCO Polymers (NDYX) #83
Features:
Ready to run
Injection molded plastic
Fine scale detail
Etched metal roof walk
Metal knuckle couplers
Road specific hatch and outlet configurations
Road specific roof walk variations
Three body style variations
Separately applied wire grab irons and wire brake lines
Crisp painting/printing
Free-rolling 100-ton trucks
HO Canadian National - SD70I Diesels (1997+) - Waterslide Decals
N Scale AutoFlood III RD Coal Hopper - CEFX #600580
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO Laser-Cut 2-Lane Curved Wood Grade Crossing - 19-21in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights.
Basic Model Railroad Benchwork - Second Edition
Softcover Book by Jeff Wilson
Jeff Wilson covers the full range of benchwork skills and materials from beginner shelf layouts to experienced modelers assembling a room-sized layout. New color photos and illustrations highlight lift-out sections and swinging access gates.
N Scale Pullman-Standard 5277 Cubic Foot Boxcar - Canadian National - #419214
Date: LRC 10-93
LOCOMOTIVE FEATURES:
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
HO Thrall High Side Gondola w/Load - LEF&C (3pk) #1
MODEL FEATURES:
- Removable load
- Wire and plastic handrails, stirrup steps, ladders and underbody details
- Factory applied ladders, stirrup steps, and wire grab
- Highly-detailed, injection molded body
- 100-ton trucks with 36 inch wheels with RP25 contours operate on all popular brands of track
- McHenry scale knuckle spring couplers
- Highly-detailed, injection molded body
- Weighted for trouble-free operation
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Thrall was a recognizable freight car manufacturing company in the 1960s to 1980s. Their designs still carry on today. The company focused on building specialized freight cars including high side gondolas, and rotary-dump gondolas for coal. In the 1980s, Thrall acquired five competing railcar manufacturers and became the largest such manufacturer of these cars in the United States.
In the 1960s, coal haulage shifted from open hopper cars to high-sided gondolas. Using a gondola, the railroads are able to haul a larger amount of coal per car since gondolas do not include the equipment needed for unloading. However, since these cars do not have hatches for unloading the products shipped in them, railroads must use rotary car dumpers (mechanisms that hold a car against a short section of track as the car and track are slowly rotated upside down to empty the car) or other means to empty them.
Walthers Mainline 54Ft Ps 4427 CD Covered Hopper Chicago North Western No.96390 - ready to use
- Detailed Replica of Grain Hoppers Used Widely in the 1960s
-Matches prototype dimensions
- See-through running boards
- 4-3-4 exterior rib pattern
- Bottom outlet gate details
- Correct 36Ft turned-metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.04 (10pcs pkg)
HO GE C30-7 - DCC & Sound - Norfolk & Western (Black Scheme) #8044
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
N Scale Flexi Flo Hopper (Late) - MDTX Repaint #897878
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Blue
N Scale NSC 5277 50Ft Plug-Door Boxcar - Canadian National CNIS #413039
MASTER MODEL FEATURES:
Bodies: 5111 or 5277 cubic foot styles
Ends: Nine or ten corrugations
Painted safety rails
Doors: 9ft or 10ft plug doors
Side Sills: Deep or shallow sills
Trucks: 70- or 100-ton
HO ET44 Tier 4 - DCC & Sound - CN Heritage/Elgin, Joliet and Eastern #3023
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
Atlas Brush Company 970-1 #1 Golden Taklon Detail Brush
HO Conrail (CR) G41A Repaint 1976 w/ Hoods PRR Shops G41A Coil Car
CR G41A Repaint 1976 w/Hoods illustrates an early CR repaint. Check out the thinner style CR logos, PC/CR style data stencils, and era appropriate ACI and PC/CR style double COTS. The early CR cars maintained their hoods for protection of the coil shipments. If you want to model the car later in their service lives, do not panic: The hoods are removeable. The interior troughs have all of that loading and identification data, too. The ends feature the original shorter style coupler lift bar brackets and Morton style crossover platforms. The 125-Ton trucks feature rotating Timken caps, 38in wheels and accurate brake beams with truck mounted brake details.
Also, these cars look great loaded with our all-new coil loads sold separately!
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
Athearn - N Scale 2 Bay 2600 Covered Hopper - Detroit, Toledo & Ironton - #11101
Flush or overhanging roof per prototype
Etched metal roofwalks
Factory installed wire roofwalk grab irons
McHenry knuckle spring couplers installed
Weighted for optimum performance
Accurately painted and printed for prototypical realism
Minimum radius: 9 3/4 "
Bi-Level Auto Racks - Providence & Worcester #102608
All are Ready-to-Run.
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene-
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage.
HO NSC Ballast Hopper - Amtrak #11638
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO Bi-Level Auto Rack - Union Pacific/TTGX Flat Car #158925
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO MLW C-630M - DCC Ready - Canadian Pacific #4501
Exec = Executive Line: Ready to Run, super detailed, numbered, with Analog (DC).
Analog (DC) version has 21 pin socket for DCC module.
Bowser does not recommend LOK sound locos for use on DC layouts.
DCC 21 pin decoder ? newest production
ESU #59629 (8 Functions) Recommended Decoder
or
TCS #EU-821 8 function decoder
HO Windmill - Built & Ready Landmark Structures
Assembled - 3-5/8 x 1-3/4 inches 9.2 x 4.5cm
HO H21A 4-Bay Hopper - Painted, Unlettered Car
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO Code 83 Insulfrog #5 Turnout - Left Hand
Technical Specification:
Length: 211mm
Frog Angle: 11.4 Degrees
Radius: 660mm
Recommended to be used with:
SL110 Conducting Rail Joiners: Nickel Silver for PECO Code 83 track
SL111 Insulated Rail Joiners for PECO Code 83 track
SL14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork
Walthers HO SceneMaster International(R) 4900 Single-Axle Semi Tractor Only - Assembled UPS 2 Axles
Licensed replica of popular International(R) trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled & painted
Die-cast metal and plastic parts
Dimension: 51 X 40 Scale Feet / 7 X 5-1/2 inches.
This kit is designed with cut lines on the back side of the walls so that door and window locations are optional. Kit includes doors, windows, and down spouts.e
These Kitbasher Series kits are built up from individual components from several our existing Pikestuff kits. We have done the kit bashing for you by providing you with of the parts and instructions to build a unique building from the Pikstuff inventory. These kits require some cutting of the soft plastic. Some cut lines are not provided, but cutting is easy and the instructions will guide you through each step along the way.
Just Plug Wall Mount Entry Lights (2)
CONTENTS:
-2 Warm White LEDs
-36 in (91.4cm) wire
-1 Linker plug
HO AutoFlood III RD Coal Hopper - GLFX #8047
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Evergreen Scale Models 2037 .037in Opaque White Polystyrene HO Scale Freight Car Siding (1 Sheet Pack)
.020in (.5mm)THICK X .037in( .95mm) GROOVE SPACING.
GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
REPLICATES 3.25in GROOVE SPACING IN HO SCALE
AVAILABLE IN 6in X 12in AND 12in X 24in SHEET SIZES
HO EMD FT A+B Set - DC/Silent - Reading (Black & Green) #256A + 256B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
Built-&-Ready Landmark Structures - Lubeners General Store
Assembled - 7-7/8 x 3-5/8 inches (11.3 x 9.2 cm)
Carrying a little bit of everything for everyone, the local general store was the original place for one-stop shopping. Owners catered to the many needs of their community, stocking and selling a wide range of general merchandise from household items to clothing to food products.
This handsome two-story brick building comes ready to set up shop along any Main Street. Its complete with everything shown, including window awnings, a variety of signs, nonworking exterior lamps, sidewalk displays, right down to the gumball machine!
Gun Metal Mini Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO Single BiLevel Commuter Car - Undecorated Cab Coach - Series 4 Body
Note: Unnumbered coaches do not include decals. Decals are available from Highball Graphics.
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO 68Ft Railgon Gondola - Crab Orchard & Egyptian Railway #800923
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
N Scale Wall Mounted Billboards - Kit (3pkg)
Product Information
Add color and variety along busy streets with these billboards, designed to mount directly on buildings! Features of this SceneMaster kit include:
Newly tooled kit!
Realistic detail for businesses, industry and other structures on busy streets
Fits 1920s to present
Parts to build three complete billboards
Colorful printed signs - see Walthers website to see variety included
Easy to assemble and install on Cornerstone(R) and other structures new or old
HO Black Gold Asphalt Hot Mix Plant - Kit
Product Information
The Walthers Cornerstone Black Gold Asphalt Hot Mix Plant will be at the receiving end of many construction projects on your layout. Requiring a steady supply of raw materials in bulk (a good paving crew can lay up to 3,000 tons of asphalt in a single shift), your hot mix plant will provide plenty of car-loadings on your modern HO Scale railroad.
Much of the sand and gravel arrives in hoppers. These distinctive cars carry money-saving loads of up to 100 tons. The aggregate is dumped into nearby storage piles for convenient movement to mixing bins with a wheel loader. Bitumen, the heavy oil byproduct used to bind rock and gravel on road surfaces, is shipped in insulated tank cars to keep it in a fluid state while in transit and during unloading. The furnace of the hot mix plant keeps bitumen at the proper temperature for mixing with aggregate. Dump trucks deliver the hot mix to specialized pavers at area construction sites where they apply the asphalt mixture at a uniform depth, width, slope and temperature, ready for surfacing and sealing by compactors.
This highly detailed kit is complete with oil tanks, two conveyors, a three-bay mixing bin with conveyor, furnace with ductwork, rotary mixing kiln, piping, double loading silos and colorful decal signs. The kit has also been designed to accept a Seuthe smoke generator (667-117, sold separately) that adds animation to your finished model.
As shown, Black Gold Asphalt Hot Mix Plant measures 9-3/4 x 14-1/8 x 10-1/2inch (24.3 x 35.3 x 26.2cm).
Use Black Gold to supply asphalt to paving projects at or near Cornerstone industrial buildings.
Great addition to 1970s and later railroads
Use as a destination for aggregate hoppers and tank cars
Rotary mixing kiln
Double loading towers
Three-bay mixing bin with conveyors
Oil tanks, furnace and piping
Colorful decals
Easy-to-build plastic kit
Molded in appropriate colors
Plastruct 90001 3/64 x 10 in Angle
HO Bi-Level Auto Rack - BNSF/TTGX Flat Car #940296
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
Trackside Around Western New York 1995-2017 w/ Michael Zollitsch (Trk #124)
RELEASED: October 1, 2022
AUTHOR: Michael Zollitsch
128 Pages, All Color
Western New York in the 1990s remained a haven of railroad diversity, scenic wonder, and traffic density. This book illustrates all of that, reflecting on all that has disappeared since. Spans Buffalo, Niagara Falls, Batavia, Hornell, Jamestown, Westfield, and many points in between!
HO Union X-3 Tankcar - Northern Pacific #101166
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO EMD SD60M - Standard DC - Canadian Pacific #6261
FEATURES:
- Limited edition - one time run of these roadnumbers!
- Prototypes in service 1989 to the present in main line & regional service
- First SD60M safety cab with three-piece windshield
- Open grating on steps
- 21-pin DCC plug
- Same powerful drive as WalthersProto(R) locos featuring:
5-pole skew-wound motor
14:1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant & directional LED headlights
- Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately
- RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
HO PS-2-4427 High Side Covered Hopper - TLDX Delivery Pillsbury 3-1967 #6762
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
TLDX Delivery Pillsbury 3-1967 shows a very highly-requested private lessee delivery scheme for the Pullman-Standard 4427. The model you already have of this TLDX car is kind of close, but isnt quite right! The Pillsbury billboard lettering fills the side of the car, from the large outlined letters to the round Pillsbury logo mounted on a square placard. What a classic. This car features all the Pillsbury phase details, including center sill supports between the bays, solid end running board supports, Miner gravity gates and ribbed-style roof hatches. The model is equipped with 100-ton Barber S-2 trucks with separately applied brake beams along with rotating Timken caps. This is a big lease scheme.
HO EMD GP7R - DC/DCC Ready - Chicago & North Western CNW #4140
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
CNW FEATURES:
NEW! Non-Dynamic with roof access hatches
1700-gallon fuel tank
Partial skirting above fuel tank
All-weather firemans side window
Flashing xenon strobe (in DCC mode only)
Wheel bearings per prototype
Era: 1982+
Era: 1993+
Era: 1982+
Chicago & North Western-
-Union Pacific Licensed Product
These Ex-CRI&P units were purchased by C&NW second-hand from Precision National in 1981, serving the railroad in a variety of service for the next 15+ years. 4160 became inoperable in 1998. In 2007 it was moved to the Illinois Railway Museum and repainted into the blue and white Rock Island paint scheme.
ROAD NUMBER SPECIFIC FEATURES:
#4140 Phase III body, 5-Chime Horn, Firecracker antenna, Front snowplow
#4160 Phase II body with 86inch Doors, 3-Chime Horn, Spark arrestors, Front snowplow
#4193 Phase II body with 86inch Doors, 5-Chime Horn, Front snowplow
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO RTR PS-2 2600 Covered Hopper - L&N #201526
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
HO Auto-Max Carrier - CMO #800025
Era: Late 2000+
MODEL FEATURES:
- Separately applied ladders, brake rigging, stirrups, and handbrake details
- Simulated corrugated roof
- Full articulation with flexible diaphragm
- Safety striping
- 70-ton roller bearing trucks
- 33 inch machined metal wheels with RP25 contours
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
In 1999, Gunderson began production of the Auto-Max articulated auto rack car. This unique car can carry 22 SUVs on three sets of internal ramps. Measuring over 140 feet long and 20 feet tall from the railhead, the Auto-Max pushes the operational and clearance limits of the railroad industry.
HO PS-2-4427 High Side Covered Hopper - Wisconsin Central WC Restencil 1987+ #97838
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
Wisconsin Central WC Ex-Milwaukee Restencil 1987+ throws a little bit of love to the early days of the Wisconsin Central. The WC startup freight car fleet was a rag-tag group of patched cars. Our WC model features the patches and reweigh data of a 20-year-old MILW car, including MILW 1980s data and the new WC reporting marks for its new owner. The yellow is also a slightly darker shade on the model, to reflect dirt and era-appropriate color changes. Yes, we even applied the accurate WCL Railcars Inc. lessee stencil on the bottom right corner. With an original 1967 built date, these WC Ex-MILW cars follow the details of earlier PS4427 High Side prototypes, including center sill supports between the bays and solid end running board supports. We have also applied replacement roof hatches and Morton-style crossover platforms on each end, modeling its 1980s appearance. This is cool example of 1987 Regional Railroading.
HO Scale SD30C-ECO - DC/DCC Ready - Canadian Pacific #5012
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
J. Burke Filling Station - Laser-cut Kit
This tiny station was a standard design developed in the 1920s, and built in various parts of the country. Typical of the times, they only sold gas and oil, but some later added a garage in the 1930s to handle repairs, and many have survived the years as home to a wide range of other business ventures.
The model features laser-cut basswood walls with laser-etched brick details, laser-etched slate shingles, laser-cut windows, doors, and trim; all with peel-and stick backing for easy assembly and painting. The kit also includes a pavement base with sidewalks and etched cracks and joints, a fence with advertising and a billboard with your choice of four vintage signs. Lead-free metal castings are provided for three vintage gravity-feed gas pumps with separate hoses you can customize, three vintage gas station street-side advertising signs, two oil highboys, a vintage air compressor and a garbage drum with a stack of boxes. Complete directions include photos and diagrams for easy step-by-step construction.
HO Class D10g 4-6-0 - DC/Silent - Canadian Pacific #922
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
HO 1950s Sedan - Taxi, City Cab Company
MODEL FEATURES:
- Factory assembled with detail parts applied
- Molded interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
- Beacon or taxi sign where appropriate
Fox Valley Models N Bi-level Auto Rack
Providence & Worcester
Features:
Die-cast underframe
Finely Molded Details
Etched Metal Panels
Formed Wire
Sharp Painting & Lettering
Multiple Road Numbers
Die-Cast Underframe
Metal Wheelsets
Micro-Trains Trucks & Couplers
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Lackawanna (DL&W Phoebe Show) #51383
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO - Nathan P3 P3U 3-Chime Air Horn - Lost Wax Brass Casting
HO White Tower Restaurant - Kit
Product Information
The Walthers Cornerstone HO Scale White Tower Restaurant is patterned after one of the first fast food chains in America. Restaurants like this sprang up from coast to coast serving up sizzling freshly grilled burgers. A natural in any downtown or industrial area, the White Tower kit is complete with the intricate Art Deco style tower and colorful sign decals. White Tower is a perfect addition to layout scenes among Cornerstone HO Scale businesses.
Realistic Art Deco styling
Decal signs
Molded in appropriate colors and clear glazing
White Tower Restaurant measures: 4-5/8 x 3 x 2-7/8inch (11.7 x 7.6 x 7.3cm)
HO 34Ft Ribbed Hopper - Pennsylvania (4 pkg) #2
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Removable coal load in each car
Machined metal wheels
Mchenry scale knuckle spring couplers installed
A total of 9 different road numbers available for each road name
Minimum radius: 15inch
HO 5820 Covered Hopper - Procor/UNPX (Low Black Solid) #122521
Era: 1990s+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
Pennsylvania, Penn Central & Conrail Caboose Marker Lights - pkg(2)
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
HO Scale - RTR 60Ft Berwick Hi-Cube Box - Missouri Pacific #269488
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Detailed underbody including full brake gear
Weighted for trouble free operation
Replacement parts available
Machined metal wheels with RP25 contours operate on all popular brands of track
Separately applied wire grab irons and etched end platforms
Machined metal wheels
Body mounted McHenry operating scale knuckle couplers
Minimum radius: 22inch
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #00066
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO & N Scale TSU-N18 Tsunami2 Sound Decoder for EMD Diesels
Dimensions: 25 x 10.5 x 4.1mm
Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output)
Function Outputs: 6
Audio Amplifier: 1 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
BIG sound in a small package! The small size of our new Tsunami2 TSU-N18 decoder makes it ideal for both N and small HO models that come equipped with a NEXT18 socket. Installations can not get any easier. Simply plug this decoder in and enjoy all of the Tsunami2 features you know and love!
You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive dynamic digital exhaust, functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. Soundtraxx also offers a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12 in each diesel version), whistles (90), airhorns (40+), couplers, dynamos and more!
The TSU-N18 can be wired to a CurrentKeeper to maintain performance over dirty track and switches.
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Yellow) #505251
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
HO 89ft Thrall Bi-Level Auto Carrier - NS/TTGX #157486
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
HO Scale 70s GMC 9500 (Short Hood) Kit
This 1970s Era GMC workhorse is ready for your hauling needs. Precision cast pewter wheels, tires and details combined with a resin cab are designed for easy assembly and painting. Clear parts enhance the finished model. Windshield panels are laser cut and the kit includes waterslide decals. Put this short hood 9500 muscle to work delivering commerce on your pike. Detailed instructions can be viewed on the Showcaseminiatures.net website
1/8 inch OD Square Copper Tube - 0.014 Thick x 12 inch Long (2 pkg)
Square Copper Tube - package of 2
Outside Diameter: 1/8 inch
Surface Water - Water Ripples
Water Ripples goes on clear and dries clear to create ripples and windswept surfaces. Customize your water colors by adding Water Tints or create whitecaps and foamy water with White Water Highlight.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
CNR Short Barrel Ore Car - Unpainted and Resin Cast Kit
Medium-Radius Three-Way Turnout Insulfrog SL 99
220 cm 8.66inch
Shipped from Ontario Canada
HO 73Ft Center Partition Car - Union Pacific #275318
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
HO Signal - Modern Cantilever Bridge (2 Track, 4 Head-Left)
There is no single model railroad accessory that captures the essence of prototypical railroading more than an operating signal system. Whether standalone or as part of an integrated system, a working signal adds both visual and operational interest to your railroad.
The Atlas All Scales Signal System enables you to provide realistic information to your train crews in a simple, yet expandable way. Our growing line of signal heads, masts, and bridges spans most common modeling eras, and are easy to install on your layout. The signals feature true scale dimensions and details, and are available in single and double head arrangements, as well as several multi-track bridge configurations. Regardless of scale, all Atlas signals now utilize a small standardized connector and separate cable to connect to the signal control boards, minimizing the impact of installation on a layout with existing scenery.
The Signal Control Board can operate standalone, or as part of an integrated system to replicate the behavior of many North American prototypes, providing selectable 2 or 3 block (ABS) operation, flashing aspects, approach-only, and PRR and color position light options. It can drive either common cathode or common anode signals, and can be powered by AC or DC. The system can be used on layouts operating on either analog (DC or AC) or Digital Command Control (DCC) power through the use of appropriate block detectors (not available from Atlas), and can also be manually controlled.
HO Duplex Sleeper - VIA Rail Canada #1112 / Edenwold
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO ALCo RS-3 - DCC/Sound - CN (Green) #3023
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO Straight Track (5-7/8 inches)(2pk)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes. Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation! Suitable for all types of layouts, whether temporary or permanent. This modular track system features an integrally molded roadbed for realistic appearance. Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
PSC Transfer Van - Canadian National #76680
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
GATX Rail Locomotive Group & Marquette Lease Diesels & Marquette Cabooses.
Atlas Brush Company 970-100 10/0 Golden Taklon Detail Brush
HO EMD SD70M-2 Diesel - DCC & Sound - New Brunswick Southern Railway #6402
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
NBSR FEATURES:
Former NS units
Front and rear ditch lights
PTC antennas
The New Brunswick Southern Railway is a Canadian short line which, combined with its sister company Eastern Maine Railway, connects Saint John, New Brunswick, with Brownville Junction, Maine. A sister company, Maine Northern Railway operates a separate 258 mile line. In 2021, a group of six former Norfolk Southern SD70M-2 locomotives arrived on the property. Painted green and yellow, each component roads
name is on two locomotives; all are owned by the New Brunswick Southern.
ROAD NUMBER SPECIFIC FEATURES:
#6401 New Brunswick Southern lettering
#6402 New Brunswick Southern lettering
#6403 Maine Northern lettering
#6404 Maine Northern lettering
#6405 Eastern Maine Lettering
#6406 Eastern Maine Lettering
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO GP40-2 - DCC Ready - CSXT #6427
Detailed Information
CSX FEATURES:
Newly tooled rear slug connection boxes
Large front anticlimber
Mid production with corrugated grilles
Body-mounted side bell
Chessie/CSX style front rock plow
K5 horn
Lit class lights and number boards (effect in DCC)
During the late 1980s, CSX Transportation modified many of their GP40-2s into -slug mothers- that powered RDMT (CSX term, short for Road-Mate) road slugs. The -slug- is a term used for (in most cases) a secondary locomotive that has a removed/deactivated engine but kept its traction motors. The -mother- unit at slow speeds can produce enough power to provide electric current to other traction motors using the same amount of fuel consumption. The -mother- and -slug- combination can provide the power of two locomotives using a single diesel powered unit. CSX liked the results, and modified many older GP30 and GP35s into road slugs, retaining their cab controls so that they could still be operated in lead position, but without the noise from the prime mover.
ROAD NUMBER SPECIFIC FEATURES:
#6427
-Stripe- repaint
regular radiator fans
-mail slot- battery box doors
#6429
-Stealth- repaint
regular radiator fans
regular battery box doors
#6441
-Stealth- repaint
Q radiator fans
-mail slot- battery box doors
large exhaust silencer
nose toilet hatch
GP40-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Gunderson Maxi III Well Car (5-Unit Set) - TTX #73456
MODEL FEATURES:
- Fully assembled and ready for your layout
- Weighted for optimum performance
- Razor sharp painting and printing
- Prototypically correct 33 and 38 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Body mounted McHenry operating scale knuckle couplers
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- Replacement parts available
- Minimum radius: 18 inches
Saber Saw Set
.022inch thick blade, 4-1/2inch long, 3/8inch wide. Ideal for large inside cuts and for cutting through thick material. Set also includes #36408 -push- & the #36406 -pull- miniture keyhole saber blades.
#1710 Roundhead Stainless Steel Screws 2-56 x 5/8 inch- 12pcs
1 Inch Wide Sanding Stick
2.54cm Wide Cloth, 120 Grit Abrasive Strip
Plastruct 90028 ABS I Beam 7/16
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
7/16
HEIGHT IN MM
11.1mm
WIDTH IN INCHES
7/32
WIDTH IN MM
5.6mm
THICKNESS IN INCHES
.060
THICKNESSS IN MM
1.5mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
TRADITIONAL ABS I BEAMS Use for horizontal or diagonal members in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or professional
HO SD60 - DCC Ready - Chicago & North Western/Operation Lifesaver #8029
MODEL FEATURES:
Locomotives come with railroad-specific details including: Operating beacon (in DCC/Sound version), horn, winterized hatch, antenna, handrails, etc.
SPECIFICATIONS:
DCC: Ready/21-Pin NEM
PROTOTYPE MANUFACTURER: EMD
Axles: 6
LIGHTED: LED Lighting
PROTOTYPE AND BACKGROUND INFO:
In 1984, Electro-Motive (EMD) introduced the 60 series locomotive. These had many improvements over the earlier models including features such as: New and improved EMD 710 power plant producing 3600 HP, wheel slip control, computerized cabinet replacing the older and unreliable components.
This design spawned into many other upgrades within its class like the modernized wide cab, Isolated cab, and even the start of AC traction technology.
These locomotives were suited for just about any mainline service that could be thrown at them. The model was fairly popular with class one railroads, with Norfolk Southern purchasing the most at 151 units. Most of them are still in service today. Norfolk Southern in 2010 started a large full rebuild program of their SD60s (including purchasing cores from other sources) into SD60Es, which rebuilt them from the frame up with new electrical components and a newly designed cab to improve visibility and forward crash impact safety.
HO Nickel-Silver EZ Track - Straight Track - Gray Roadbed
Nickel silver track and gray roadbed; 4/card
Four pieces of 9in Straight Track build 36in of railroad.
HO - 24Ft Ribbed Ore Car w/Load - B&LE (4 pkg) #4
Detailed Information
MODEL FEATURES:
Removable load
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied brake wheel
Machined metal wheels
Weighted for trouble free operation
Solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 15inch
PROTOTYPE AND BACKGROUND INFO:
Iron ore is a rock from which metallic iron can be extracted. About 98percent of the mined iron ore is used to make steel. Many railroads around the great lakes have unit trains that transport mined iron ore to transport via barge for processing. These trains are very distinctive with train sets of small cars carrying very heavy loads of dense iron ore.
123mm (4 7/8 inches) Uncoupling track [2 pcs] - S123U
N Scale Prairie Co-Op Elevator - Kit
Classic small town terminal elevator
Typical of concrete elevators in use from 1915 to today
Used with all types of grain
Square design with four silos
Off-center head house
Cement block unloading shed
Cement block office with truck scale
Loading spouts for boxcars & covered hoppers
Separate dust collector, vents & sampling arm
Molded in white, light gray & clear plastic
Finished model measures:
Main Structure: 5-3/16 x 3-3/16 x 7-1/4 inches 13.1 x 8 x 18.4cm
Office/Scale House: 2-5/8 x 2-1/16 x 1-3/8 inches 6.6 x 5.2 x 3.4cm
Truck Scale: 1 x 3-1/2 inches 2.5 x 8.8cm
Spray Can - Clear Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO EMD SD7 - DCC & Sound - Southern Pacific (Black Widow) #5329
Southern Pacific
- Steam generator equipment details on short hood
- Correct Mars style -ash can- light on both ends of the locomotive
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO ALCo RS-3 - DCC/Sound - CN (Black) #3039
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
Evans X72 Box car: Penn Central w/ Small Logo - Single Car #266577
Detail Variations:
As operated between 1973 to 1976.
6-pack includes the following numbers:
#266577
#266850
#269268
#269320
# 269827
#269899
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
Coarse Turf - Fall Yellow - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
VIA RAIL (EARLY) (1978 to mid 1990s)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Union Pacific
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
HO GE ES44AC - DCC Ready - Canadian Pacific St. John Express #8781
ETA: June 2023
Detailed Information
CP FEATURES:
No engine compartment side grab irons
Raised radiator grills
Raised heat exchanger
Canadian Pacific placed eight orders for ES44AC locomotives spanning a decade of production. Early production units featured a distinct cab and nose profile as well as radiator, intake, and hood door variations. These features changed in later productions. The CP units in this offering represents features from the mid- production. While the cab, nose, and radiator intakes are the same as early units, the long hood doors and other features have evolved into what is found on late production units. Athearn has created new tooling to accurately produce these particular units.
ROAD NUMBER SPECIFIC FEATURES:
#8781
Special commorative paint scheme
PTC antennas
raised radiator screen
ES44 SERIES LOCOMOTIVE FEATURES:
Illuminated ditch lights
Tinted cab windows
Large antenna dome
GPS dome
Hand brake panel grille
Nathan K5HL horn
5000-gallon fuel tank
Low or high front headlight per prototype
See through dynamic brake intakes
Low or high front headlight per prototype
See through dynamic brake intakes
Short auxiliary cab rear left-side doors
Right side forward electrical cabinet with X-Panel
Engine compartment side grab irons (Non-CP Units only)
No engine compartment side grab irons (CP Units only)
Flush radiator compartment doors
Flush heat exchanger housing and top radiator grilles (Non-CP Units only)
Raised heat exchanger housing and top radiator grilles (CP Units only)
Dynamic brake exhaust vents spaced per prototype
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
VIA Rail HEP2 Coach Scheme (1996 to Present)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
HO PS-2 2893 3-Bay Covered Hopper - Chessie C&O #2052
MODEL FEATURES:
Separately applied round roof hatches
Photo-etched metal roof walk
Factory applied wire grab irons
Detailed outlets
Separate brake cylinder, valve, and air reservoir with wire brake plumbing
Weighted for optimum performance
33inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Minimum radius: 18inch
HO GE ES44AC - DCC & Sound - Canadian Pacific #8767
ETA: June 2023
Detailed Information
CP FEATURES:
No engine compartment side grab irons
Raised radiator grills
Raised heat exchanger
Canadian Pacific placed eight orders for ES44AC locomotives spanning a decade of production. Early production units featured a distinct cab and nose profile as well as radiator, intake, and hood door variations. These features changed in later productions. The CP units in this offering represents features from the mid- production. While the cab, nose, and radiator intakes are the same as early units, the long hood doors and other features have evolved into what is found on late production units. Athearn has created new tooling to accurately produce these particular units.
ROAD NUMBER SPECIFIC FEATURES:
#8767
Standard Canadian Pacific paint scheme
PTC antennas
raised radiator screen
ES44 SERIES LOCOMOTIVE FEATURES:
Illuminated ditch lights
Tinted cab windows
Large antenna dome
GPS dome
Hand brake panel grille
Nathan K5HL horn
5000-gallon fuel tank
Low or high front headlight per prototype
See through dynamic brake intakes
Low or high front headlight per prototype
See through dynamic brake intakes
Short auxiliary cab rear left-side doors
Right side forward electrical cabinet with X-Panel
Engine compartment side grab irons (Non-CP Units only)
No engine compartment side grab irons (CP Units only)
Flush radiator compartment doors
Flush heat exchanger housing and top radiator grilles (Non-CP Units only)
Raised heat exchanger housing and top radiator grilles (CP Units only)
Dynamic brake exhaust vents spaced per prototype
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PA-1 Single Locomotive - DCC & Sound - Pennsylvania #5755
Includes:
• No Dynamic Brakes
• PRR-style nose vents
• PRR-style lighted add-on number boards
• PRR style marker lights on rear
• Trainphone antenna
Our first run of Alco PA models feature:
• Correct nose and roof profiles 3D-scanned from the prototype
• Loads of roadname-specific details
• A units and A-B sets available
• Dynamic or non-dynamic brake versions, where appropriate
• Full underbody piping and conduit
• Separate grab irons and handrails installed at the factory
• Etched-metal grilles, where appropriate
• Lit number boards, headlights and green and white class lights
• Lit control stands and full cab interior
• Operating Gyralite or red Mars light, where appropriate
• Rapidos proven drive system adapted from the FA-2
• DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options
• Now with a TCS Sound Decoder featuring Rapidos exclusive
Alco 244 sounds, programmed to operate seamlessly with
Rapidos other sound-equipped locomotives.
HO EMD SD9 - DC/Silent - Chicago & North Western #6608
Chicago & North Western
- Rebuilt at the Oelwein Shops with chopped down nose - a first in HO Scale!
- Modified panels on side sills of locomotive
- Modified/plated over details of dynamic brake blister (Smooth plating over where grilles once were)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO GP9 - DCC & Sound - Chesapeake & Ohio #6182
ETA: May 2023
Detailed Information
C&O FEATURES:
Short hood mounted bell
Forward 5-chime horn
Dynamic brakes
Tall exhaust covers
Expert approved art
Between 1955 and 1957 C&O bought 363 GP9s. These units were the backbone of the fleet, used on both road trains as well as local service. In the mid 60s C&O adopted a new simplified paint scheme with the large C&O initials on the long hood. Although the purchase of newer high horsepower units displaced many GP9s to secondary service, most of the fleet soldiered on into the mid 80s. Many units were retired in this version of C&O dress. These road numbers lasted into the mid 1980s which allow the widest range of modelers to benefit from this release.
ROAD NUMBER SPECIFIC FEATURES:
#682
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#683
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#688
Dynamic brakes
bell mounted on long hood
#690
Dynamic brakes
bell mounted on long hood
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Portec 3000 Covered Hopper - Midwest Railcar (MCEX) - #330224
Features:
- Ready to run
- Injection molded plastic
- Fine scale detail with many separately applied parts
- 2 Body and roofwalk variations to accurately match the prototype
- 2 styles of vibrator brackets
- Highly detailed end cages and brake gear
- 100 Ton Trucks
- Metal Couplers
- Etched metal roofwalks and end platforms
- Crisp painting and printing
DC/DCC/Sound - MLW FB-2 Canadian Pacific (block lettering) #4467
FB-2 and FPB-2 models feature:
Operating back up lights. As appropriate.
Roadname specific details with or without dynamic brakes. As appropriate.
The only HO scale Alco/MLW B unit with accurate phase details including vertical or horizontal battery box louvers and etched metal Farr or mesh side grilles.
Canadian or American cast Type B trucks. As appropriate.
Full underbody piping and conduit.
Correct roadname and manufacturer specific FB-2 and FPB-2 fuel tanks.
Canadian Pacific features:
Phase 2 body with horizontal battery box louvers and Farr grilles.
Dymanic brakes
CP fabricated water tank
Dofasco Type B trucks
Kalmbach Publishing Book -Model Railroaders Guide to Bridgers and Trestles
The Model Railroaders Guide to Bridges & Trestles from Kalmbach is your one-stop source for information on prototype bridges. This book will guide you through the history of the various bridge types from the first days of railroading through today, showing older bridge types still in use, older bridge types that are now obsolete, and new concrete and steel designs. This also book includes the history of various types of bridges, tells about how bridges have evolved in design and size and how bridges fit in with other related scenic elements. It also discusses many bridge types including wood trestles, stone and concrete arches, culverts, wood and steel truss bridges, steel plate-girder bridges and cantilevers. Its loaded with information to help model railroaders choose appropriate bridges for the region, era, and type of railroad they model. Model Railroaders Guide to Bridges & Trestles is one of many Kalmbach model railroading how-to books.
Pearl Clear Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
Medium Spikes 800 pcs
Spikes for handlaying track. Suitable for most scales - will look prototypical for On3/0. Also suitable as a larger sized spike choice for HO scale handlaid trackwork (easier to work with than the small spikes).
Package of approximately 800 pieces. 3/8 In length.
HO USRA Composite Drop-Bottom Gondola -Ready to Run- Michigan Central #12129
Date: BLT 8-19
All are Ready-to-Run
-Laser Cut Wood Sides and Floor
-Laser Sharp Painting and Printing
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504995
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
Cement for Plastics/Polystyrene - 5/8 fl oz Tube
Cement for Plastic Models is specially formulated for joining all polystyrene plastics and can be used in the construction of plastic model kits and may also repair many common household products made of polystyrene or ABS plastics.
DIRECTIONS FOR USE:
Pre-assemble parts without cement to insure proper fit. Trim or file where necessary. When cementing painted or plated parts, scrape away paint or plating from surfaces to be joined. Apply cement sparingly to one surface and press firmly together.
AVOID CEMENT ON FINGER TIPS, AS GLUE SMUDGED ON AREAS NOT TO BE JOINED CANNOT BE REMOVED.
It will also discolor or cloud up clear parts.
Do not use on clear parts.
HO NSC 5304 Boxcar - Canadian National (Delivery w/ Green Door) #557606
The Rapido NSC 5304 cu.ft. CN Combo Door Boxcar features:
Separate grab irons installed at the factory
100-ton Barber S-2 trucks, with metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe
N Scale D10/D12 NMRA Knurled Brass Roller For Track Cleaning Car
CNC machined, N-Gauge brass body. This is a complete kit with the cleaning car, trucks and couplers, brass roller and 10 roller covers. You will just need to supply the track cleaning fluid.
SPECIFICATIONS:
N-1 has Rapido trucks and Standard couplers.
N-2 has MicroTrains Line Magnematic Trucks and Couplers.
This body style DOES NOT meet NMRA specifications for clearances.
If you require that specification, please purchase a D-10, D-11 or D-12 model.
N Scale Bettendorf Trucks w/o couplers (1pair)
HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #136082
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Mainline with 9 inch Tie Strip (50pkg)
These self-gauging tie strips allow trouble-free, museum-grade detail for almost any skill level of modeler. These CVT ties allow for Code 83, 70 and 55 rail with no need for a track gauge if using RP25 wheelsets gauged to NMRA standards.
11/32 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 11/32 inch
Tangent Scale Models HO V3 PS4750 Covered Hopper CNW Ex-ROCK Blue w/ White CNW
CNW Ex- ROCK -Blue w/ White CNW- V3 is a second banditized ROCK scheme variation. After the ROCK bankruptcy, CNW and other railroads assumed ownership of former ROCK freight cars, including this series of PS4750s. We have represented some aging of the car body color with faded blue paint. For this version, the large R and The Rock and the reporting mark/number have been painted out. A black CNW herald has been added to the upper right corner of the car, just like the prototype.
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
42 ft Coil Steel Car with Fish Belly Side Sill DLRX #166287
The Atlas Master HO Scale 42ft Coil Steel Car with Fishbelly Side Sill is perfect for adding interest to your 1990s and later steel mill train consists. The increased volume of coiled-steel transportation gave rise to a new purpose-built freight car. Previously rolls of coiled-steel had generally traveled in specially equipped gondola cars. In the 1960s a lighter type of car emerged specifically for hauling coils of steel in an integral trough. The car type gained popularity and eventually over 17,000 cars were built. This 42ft Coil Steel Car with Fishbelly Side Sill is patterned after cars introduced in the 1990s and in use in the 21st century. Features of the 42ft Coil Steel Car with Fishbelly Side Sill include prototypical paint schemes and lettering see-through walkways, a removable hood on equipped cars, inside floor detail cut levers, metal wheels and AccuMate magnetic knuckle couplers.
HO GP9RM - DCC & Sound - Canadian National (Stripes) #4021
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO RTR 70 Ton 2 Ballast Hopper w/ Side Chutes - Santa Fe ATSF #177778
Blt. 2-57
Product Information
Perfect for work train service on our railroad, Bowser HO Scale ready-to-run 70-Ton 2-Bay Ballast Hoppers with Side Chutes (Ballast Gates) feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make these 70-Ton Ballast Hoppers welcome additions to any diesel-era freight train consist.
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1767
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO 60ft NSC 5150 3-Bay Covered Hopper - Union Pacific #90792
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO E-Z Riders with Ball Bearing Rollers (HO/On30 Scale
4 per pack
designed for use with HO and On30 locomotive drivers (can also be used for non-drive wheels)
full electrical pickup
perfect for workbench testing
work with 6 axles loco too
Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- SP -B-70-54 Delivery 2-1970
Product: Greenville 86′ Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Southern Pacific: This B-70-54 group covers SPs first order of quad door cars that were part of the GM Stamping Pool out of Cleveland, Ohio on the B&O. The scheme, of course, is simply one of the coolest paint jobs ever applied to a Greenville 86ft boxcar. Hold this car in your hand to appreciate the nuanced differences between white stenciling and SP Lettering Gray stenciling. From the huge dark gray arrows pointing to the centered SP logo, to the smallest black door handle detail, it?s all there. The SP cars feature their as-built 1970 appearance that includes Apex crossover platforms, a Universal hand brake housing (with separate long handle!) and a Universal brake wheel. SP ordered their cars with Center-Of-Car cushioning, and we have duplicated this setup, with a complete COCC underframe and draft gear. 70-Ton Trucks with 33in wheels and rotating Timken roller bearing caps finish off this replica. These SP replicas are Ready-To-Operate in eight numbers!
HO AutoFlood III RD Coal Hopper - PGNX #1202
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO Portec 3000 Covered Hopper - Boston & Maine
Features:
- Ready to run
- Injection molded plastic
- Fine scale detail with many separately applied parts
- 2 Body and roofwalk variations to accurately match the prototype
- 2 styles of vibrator brackets
- Highly detailed end cages and brake gear
- 100 Ton Trucks
- Metal Couplers
- Etched metal roofwalks and end platforms
- Crisp painting and printing
HO GP40 - Gold DCC & Sound - Susquehanna #3040
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
HO Dash 8-40CM - DCC & Sound - Quebec North Shore & Labrador: QNSL #402
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
N Scale Flexi Flo Hopper (Late) - CR (Conrail Repaint) #897770
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
Union Pacific Harriman #9004
Built new in 1955 by American Car & Foundry, UP 9004 was set aside for special assignments in 1974. In 1987, the car was named Harriman in honor of Edward Harriman and his sons Averell and Roland, who all served as Directors of the company. From 1989 to 1990, the car was named Sun Valley.
Tear & Plant Meadow Mat - Lowland Meadow
DIMENSIONS:
8-5/8 x 7-7/8 inches (21.9 x 20cm)
FEATURES:
- Can be used for HO, N, O or larger scales
- A realistic grass meadow in minutes!
- Easily cut or torn into smaller pieces or to fit you available space
- Great for adding long grass to medium and large areas
- Flexible for easy use on uneven terrain
- Ready to use
- Varied colors and flocking for added realism
- Includes 10 individual grass tufts too!
- Flexible transparent base blends into existing scenery
HO 70-Ton 12-Panel Hopper - Conrail #436152
Blt.6-60
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO SP 3/4 Dome-Lounge w/Fluted Sides - Southern Pacific (General Service) #3606
Rapidos SP Dome Lounge Cars Features:
Designed from original blueprints and field measurements of existing cars
Two fully-detailed interior configurations
Multi-colour interior decoration
Two underbody arrangements
Accurate interior and exterior paint and decoration
Full flicker-free track-powered interior lighting
Lighting (prototypically) in the dome roof
Accurate free-rolling trucks
Metal magnetic knuckle couplers
HO 4-8-4 Class FEF-3 - Sound/DC/DCC with Smoke - Union Pacific (1989 - 2013 Excursion w/ Mars Light) #844
The Northern type locomotives on the Union Pacific were built by Alco Schenectady Works in 3 classes between August 1937 and December 1944. The first class, designated FEF-1, for Four Eight Four, comprised numbers 800-819. Fitted with 77-inch drivers and a 300-pound boiler pressure, UP was impressed by their performance and took delivery of 15 additional 4-8-4 locomotives in Aug-Oct 1939, numbers 820-834. These locomotives were equipped with 80-inch drivers and larger 14-wheel centipede style tenders with a 23,500 gallon capacity and were class FEF-2. In Dec 1944, 10 additional 4-8-4 locomotives were delivered, these equipped with low-backpressure double stacks, numbered 835-844, and designated FEF-3. All three classes developed 63,800 lbs of tractive effort.
Throughout their service careers multiple modifications were made, including conversion to oil, feedwater heater systems, addition of smoke lifters (designated Wind Wings on UP drawings) and a Mars light, and replacement of stacks from singles to doubles and even triple stacks. UP 844, the final steam locomotive delivered to UP, has been in continuous service on Union Pacific since it was built in 1944; renumbered from UP 844 to UP 8444 between June 1962 and June 1989.
In this production, BLI is modeling the FEF-2 Class and also the #844 with its Mars Light. Notable features are listed below:
Accurately modeled FEF-2 double stack and triple stack - prototypically accurate for each road number
Accurately modeled turret casing
Individual side rods
Centipede-style oil tenders with finely detailed oil inserts. #844 has the Heritage Fleet containment dam, other road numbers do not.
Options for Worthington and Sellers FWH
Wind Wings on models where prototypically accurate
Prototypically accurate FEF-2 front end and pilot (except #844)
Walschaerts Valve Gear
#844 as it ran from 1989-2013, with Mars Light
2mm Static Grass - Snow (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
F30A 50Ft Flat Car: Lehigh Valley #10037
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
Nathan Type P-3 - Air Horn
Details West HO Scale locomotive Air Horns are based on those used on locomotives and cab car rooftops. Available in several designs to match a variety of prototypes, each part is a detailed brass casting.
For all types of 1st and 2nd generation units, brass.
NYC As Delivered (963H) - In Service 1965
Car Numbers: 885827
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO Amtrak NPCU Cabbage - DC/DCC/Sound - Amtrak (Phase III) #90222
The Rapido Trains HO scale Amtrak NPCU -Cabbage- features:
Fully powered, available in silent DC or DC/DCC/Sound
DC models are DCC-ready with a 21-pin plug
Accurate enlarged marker lights, supplementary air reservoirs and K5LA horn
Operating, flashing ditch lights
Operating strobe lights and marker lights
User-controlled operating number boards
Etched-metal radiator grilles and windshield wipers
Separate handrails and grab irons installed at the factory
Rapidos proven 5-pole, skew-wound motor and silky-smooth drive system
Metal, magnetic Macdonald-Cartier Couplers mounted at the correct height
Second release paint schemes include:
Amtrak Phase III
Amtrak Phase V
Amtrak Phase V -Downeaster-
Amtrak -Salutes Our Veterans-
HO 57ft Trinity 4750 3-Bay Covered Hopper - KCS #310596
FEATURES:
- One-time run of these roadnumbers, order now - limited quantity available!
- Prototypes introduced in 1990 - thousands still in service today
- Clerestory-style roof
- Late Trinity-style jacking pads and pulling tabs
- 1990s-era square cornered roof hatches
- Detailed hopper gates with vibrator brackets & outlets
- Perfect for serving Cornerstone(R) grain elevators, sold separately
- 100-ton trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO GMD SD40-2f - DCC & Sound - Central Maine & Quebec #9023
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO Flexible Herringbone Dark Red Brick Sheet (2-Pack) - Medium
Product Information
The Chooch Enterprises Flexible Brick Wall Sheet is hand cast in super-detailed flexible vinyl. Easy to use, each pack comes with peel and stick permanent adhesive, which adheres to any flat, smooth surface. Thin material is easy to cut with a No. 11 blade or scissors. Brick sheets are painted in a base wash of color. Use the sheets right out of the package or paint with water-based acrylics. Each sheet measures 3-3/4 x 12inch 9.5 x 30.5cm. Three sizes of sheets are available with this texture: Small for N and HO Scales; Medium for HO Scale; and Large for HO, S and O Scales. Flexible Brick Wall Sheet 2-Packs are part of the extensive line of Chooch flexible walls and paving sheets.
HO USRA Single-Sheathed Boxcar: CNJ
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Tru Color Paint - Acrylic - MILW Red Orange - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Lightweight Coach - Canadian National - Wet Noodle #5654
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO ALCo RS-3 - DCC/Sound - Boston & Maine #1506
(without lighting box on the deck)
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) (6pkg) #2
1954+
6-Pack includes the following numbers, all individually packaged: #900220, 900610, 901243, 902144, 903233, 903984
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO SD60M Wide Cab Diesel - DCC & Sound - CSX #8768
Expected in May 2022
Detailed Information
CSX FEATURES:
-YN3- Scheme
Ex-CR
Small EMD plow
Front ditch lights
CSX-style GPS dome
K-5 horn
After the CR split in 1999, CSX acquired 30 ex-CR SD60Ms. Around 2007, they were repainted into CSXs more simplified -YN3- scheme while retaining most of the CR-specific details. They operated until 2017 when their lease expired and they were sold off to a leasing company.
LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully-assembled and ready-to-run
Replacement parts available
Minimum radius: 18inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1801
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO EMD SW9 - DCC & Sound - New York Central (NYC As Delivered) #8925
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO Scale - 50/56 Mack LH S/A Tractor- Unpainted and Resin Cast Kit
HO 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - GE Rail Services Corporation/ITLX #30271
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Prototypes in service from late 1980s to the present
- Separately molded and applied hopper gates
- Correct 36 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
HO 26Ft Can-Car Dry-Van Trailer - Reimer Trucking #3768
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian National #621442
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Code 100 Remote Control Snap-Switch(R) - Right Turnout
This Atlas HO Scale Code 100 Snap-Switch Turnout features Code 100 nickel-silver rail with black molded-plastic ties and a plastic frog. The turnout comes equipped with an attached remote controlled, above-benchwork electric switch machine. The switch machine can be thrown with a Switch Control Box, 150-56 (sold separately). The 18 inch radius turnout also includes a 1/3 18 inch radius curve compensator track so for planning it equals one 18 inch curved section. The Snap-Switch turnout can also be thrown manually using the small sliding lever on the turnout. The track geometry of Code 100 track matches that of Code 83 Snap Track, so Code 100 track can be substituted for Code 83 in various Snap Track track plans when using adaptor track joiners (sold separately).
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SECX #2305
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Rotary Beacon with Cored Lense - Western Cullen Type D-312
White metal base with styrene lens.
Type D-312 used by UP, BN, ATSF and others.
HO Union Pacific Yard Master - Train Set
The power of a steam engine is guaranteed to be what you need to master any rail yard shunting job with ease. An 0-6-0 locomotive with Union Pacifics distinctive greyhound color scheme and slope tender sends a puff of smoke skyward as it prepares to position rolling stock for pickups, much like a game of strategy. Plan your moves, assemble a consist, and send freight on its way with the Yard Master!
This ready-to-run train set includes:
- Baldwin 0-6-0 steam locomotive with operating headlight, smoke, and slope tender
- gondola
- off-set cupola caboose
- body-mounted E-Z Mate couplers
- 36 inch circle of snap-fit E-Z Track including 11 pieces of curved track and 1 curved plug-in terminal rerailer
power pack and speed controller
- illustrated instruction manual
Tangent Scale Models HO Lehigh Valley PC Samuel Rea Shops 4600 Covered Hopper
Product: PC Samuel Rea Shops 4600 Covered Hopper System
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps
Wheels: CNC-Machined 36in Wheels
Lehigh Valley (LV) -Delivery Gray 12-1968- shows off Lehigh Valleys large, distinctive graphics on the side of the car. These cars were delivered in a beautiful gray with the red LV flag across 2 panels. Penn Central built 100 cars for Lehigh Valley in December of 1968, stenciled for 4550 cubic feet capacity and equipped with truck-mounted brakes. On the B-end of the car, that translates to a missing brake cylinder and a brake linkage that extends lower than the sill, on its way to the trucks. Speaking of the trucks, they were delivered in a red-brown color that really stands out from the LV graphics and the gray car body. The 100-ton Barber S-2 trucks have individual brake cylinders mounted on the truck brake beams. These models are equipped with an accurate Peacock 6500 brake housing and modern-style brake wheel. The three bays are equipped with intricate and accurate Keystone Portloc -Combo- gates, allowing the prototype cars to be unloaded by simple gravity or an air-assisted pneumatic system. We are very pleased to release yet another LV model, and for those who are paying attention, know that we will continue to execute Lehigh Valley prototypes of all kinds to the highest level possible.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CWSX #140028
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Double-Ended Pin Vise - With 2 Double-Ended Collets
The Zona Double-Ended Pin Vise comes with two double ended collets with 0inchp.109inch or 7/64inch (0 p2.7686mm) capacity range. 3-7/8inch overall length. Four chuck sizes for drills, miniature reamers, files and small tools: 0 p.05inch, .03 p.08inch, .05 p.10inch, and .07 p.11inch.
HO Peterbilt 579 Day-Cab Tractor with Food-Grade Trailer
Tangent Scale Models HO PS4750 Covered Hopper - KCS - Delivery Brown
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
KCS -Delivery Brown 12-1979- The KCS scheme is simple and eye-catching, with the tall KCS reporting marks, white circle delineators and brown matching trucks. The center sill correctly models the brake linkage access holes on one side of the car, just like the real ones. This is a big scheme, and we know our KCS customers have been a patient group. Our KCS terra cotta colored masterpieces accurately depict their Pullman-Standard prototypes.
HO EMD FT A+B Set - DC/Silent - Reading (Black & Green) #253A + 253B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO 90ft Single-Track Railroad Deck Girder Bridge - Kit
DIMENSIONS: 12-7/16 x 1-3/16 x 1-1/2 inches (31.5 x 3 x 3.8cm)
This authentic Walthers Cornerstone 90ft Single-Track Railroad Deck Girder Bridge is typical of bridges used for decades on lines large and small. Railroad deck girder bridges are used in all kinds of arrangements across the continent. Use this kit as a stand-alone bridge supported by Cornerstone Engineered Bridge System bridge abutments or as part of a larger viaduct with piers, Steel Railroad Bridge Towers or Bridge Tower Bents. Once in place, add track of your choice (sold separately). Kit parts come molded in dark gray plastic and feature simulated steel construction.
- Part of the Cornerstone Engineered Bridge System
- One of the most popular railroad bridge designs with unlimited overhead and side clearance for passing trains
- Fits steam, diesel and modern-eras
- Available in four common lengths to match prototype practice
- Build with open or ballasted deck
- Perfect as approach spans for bigger Cornerstone and other bridge kits
- Add to new or existing scenery with Single-Track Center Piers (933-4550) and Abutments (933-4551) (available separately)
- Use with track of your choosing
- Detailed plastic parts molded in dark gray
- Use with Steel Bridge Towers and Bents (both sold separately) to model a viaduct
HO 40Ft Hi-Cube Dry Containers - Evergreen Line (3pk)
3 pack road numbers include : EGHU 945599/946186/946389
Body: Type A
Door: Type B
Latch: Type D
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
HO 40Ft Wood Reefer - Canadian National #207123
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch
N - 1/160 New Look Bus - Toronto (Maroon)
Detail Variations:
Illuminated headlights and brake lights
Front Water Bumper, Rear Steel Bumper
All of our N scale New Look Bus models include:
The exact New Look shape – including the unique tubular profile – traced from a 3D-scan of a real TTC New Look Bus
Full underbody detail including fuel tank, cabling, engine detail, etc.
Early (5303) rear engine door style
Left-side emergency exit door
Full interior including drivers controls, passenger seats and grooved flooring.
Super-detailed wheels with REAL rubber tires
Separately applied mirrors
Three front bumper styles − steel, water and rubber (installed as appropriate)
Rear Air Conditioner Unit (installed as appropriate)
WORKING headlights and taillights, powered by a 9-12V DC power supply (not included)
Atlas HO Scale - Code 100 Rerailer
HO Code 100 with black ties/ nickel silver rail. Atlas offers track in single pieces without packaging. Pricing is per single piece.
HO Maxwell Ave. Porch Kit
The Rix Maxwell Ave. Porch Kit is molded in styrene plastic and features clapboard gable, asphalt shingle roofing, brick porch, doors and steps.
Dimensions:
9 deep x 21 wide x 17 tall scale feet
1-1/4 x 2-7/8 x 2-3/8 inches
N - 1/160 New Look Bus - Santa Monica 2525
Detail Variations:
Illuminated headlights and brake lights
Front and Rear Steel Bumpers
Rear A/C unit
All of our N scale New Look Bus models include:
The exact New Look shape – including the unique tubular profile – traced from a 3D-scan of a real TTC New Look Bus
Full underbody detail including fuel tank, cabling, engine detail, etc.
Early (5303) rear engine door style
Left-side emergency exit door
Full interior including drivers controls, passenger seats and grooved flooring.
Super-detailed wheels with REAL rubber tires
Separately applied mirrors
Three front bumper styles − steel, water and rubber (installed as appropriate)
Rear Air Conditioner Unit (installed as appropriate)
WORKING headlights and taillights, powered by a 9-12V DC power supply (not included)
HO Galvanized Culvert Pipe - 24 Inches (4pk)
Specifications
Scale: HO (1:87)
Sizes: 0.28 inch
Length: 3.4 inches
Galvanized steel culvert pipes have been around for over a century and serve many purposes from storm sewers to drain pipe and even irrigation. Found where roads or railroads cross low lying areas, streams, or other waterways, these galvanized pipes provide a pathway for water to flow while reducing erosion at these critical crossings.
Suitable for any era, these galvanized culvert pipes will look right at home on your layout. Each HO-scale pipe section is 25 scale feet long and comes in a variety of diameters, suitable for many different applications. Hollow throughout, each pipe features realistic corrugations both inside and out.
N Scale Dash 8-40CM - DCC & Sound - Canadian National: North America #2451
Our N Scale Dash 8-40CM model features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
Heavy, die-cast chassis with a powerful motor and dual flywheels
Operational headlights and rear lights with operational factory-installed ditch lights (plus rock lights on BCOL locomotives)
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
Factory-installed couplers mounted at the correct height
N Scale Short Barrel Ore Hopper - CN Mineral Brown #346020
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO B-50-15 Boxcar - Rebuilt w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #15564
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
GP40-2 - DCC & Sound - DT&I #408
Detailed Information
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; were excited to include new features often requested, to the GP40-2 and upcoming Genesis models.
DT&I FEATURES:
Chickenwire radiator grills
Front & rear drop steps & footboards
Gong bell on nose
Pilot grabs
Illuminated strobe (effect on DCC+sound version)
No dynamic brakes
2600 gallon fuel tank
Firecracker antenna
Nathan M3 horn
All-weather window on engineers side
DT&I style extra grab irons on nose
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
PROTOTYPE SPECIFIC INFORMATION
By the early 1970s, many first generation diesels were reaching the end of their service lives. The most common replacement locomotives became the GP40-2. EMD began production of the 16-cylinder, turbocharged, 3000 horsepower engine in 1972. These locomotive were developed for service where higher horsepower and faster service were preferable. A major feature for the GP40-2 was the introduction of the -dash 2- modular electrical cabinet. For more than 40 years, the GP40-2 has worked main line freights, locals, switching jobs, yard service, and helper service. Many remain in service today.
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Union Pacific Rack, Trailer Train Flatcar (TTBX) #963120
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO Greenville 86ft Double Plug Door Box Car - B20 Repaint 1989+ Norfolk Southern #868191
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: October 2021
Norfolk Southern (NW) B20 Repaint 1989+ offers one of our most requested schemes for this boxcar, a Norfolk Southern option. These cars were painted in NS brown paint in 1989 complete with the NS logo stenciling in white. This 1965-built Greenville group features accurate Center-of-Car Cushioning details, a Hydra-Cushion cylinder and truck mounted brake hardware. The B20 class rides on 70-Ton Barber S-2A Roller Bearing Trucks, with 33inch wheels and accurate rotating -Timken- roller bearing caps. As a reminder, N&W was the largest original purchaser of Greenville 86ft auto parts boxcars from multiple eras, and these cars literally went everywhere. These beauties are available with six road numbers!
SD70MAC Diesel, w/ DCC & Sound - CSX #4579
Era: 2016+
EMD SD70MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
First time ever with front and rear Rubber MU hoses, Trainline hoses, Cut levers, and rear Spare
CSX FEATURES:
CSXs latest -Boxcar- scheme. Simplified cab roof antennas. Rear pilot mounted spare knuckles. 4526 and 4547 are ex CSX 725 class and 4577 and 4579 are ex CR 4130 class.
LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PROTOTYPE SPECIFIC INFORMATION
During the early-1990s, EMD teamed-up with German engineering company Siemens to produce a freight locomotive that was capable of providing AC-traction drive currents, and thus providing a high-horsepower rating and lower fuel consumption for railroads which had an ever-increasing demand for saving fuel consumption by using a lesser amount of units to haul most of their trains.
The EMD SD70MAC was first introduced in early 1993, and began production later-on during the same year after numerous tests and improvements were made. Since then, the EMD SD70MAC has been a staple of heavy freight lines across the country.
HO Dash 8-40CM - DCC & Sound - Canadian National: Website #2429
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
Acrylic Flat Colors - German Gray - 3/4oz (23mL) Bottle
XF-63
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
60 Ft Water/Oil tank peaked top kit
60 foot tall by 24 foot in diameter riveted steel tank with peaked top.
The Rix Water and Oil Tank is designed to represent riveted steel tanks which the railroads started building back in 1880 during the steam era. Today tanks similar to these are being used to hold oil and chemicals. The Rix Water and Oil Tank is made up of 6 band segments which form a complete band. The bands are then stacked one on top of another until they reach the given height. Kits include enough band segment to produce either a 29, 43 or 60 foot tall by 24 foot diameter tank. Two styles of tops are offered, flat top or a peaked top. All tanks are molded in a black polystyrene.
9/32 inch OD Round Brass Tube - 0.029inch Thick x 12inch Long
Round Brass Tube (1 pc)
Outside Diameter: 9/32 inch
HO ET44 Tier 4 - DCC & Sound - CN Heritage/BC Rail #3115
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
CSX Power In Color: Volume 5 - by Kurt Reisweber
RELEASED: November 1, 2022
AUTHOR: Kurt Reisweber
128 Pages, All Color
Continues the series with a mix of roster and action photos of another segment of the CSX all-time locomotive fleet! Featured are locomotives acquired used by CSX either through acquisition of whole railroads or by purchase of individual locomotives. Units acquired from Conrail and the RF&P are included, as are former Delaware & Hudson, Susquehanna, Monongahela, EMD, and Amtrak power.
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.250 (7pcs pkg)
16-3/8 x 7-1/8 x 5-15/16 inches - 40.9 x 17.8 x 13.2cm.
With its colorful signs and period styling, this HO Scale structure is right at home from 1900 to the present day. Based on a prototype at Waterloo, Iowa, it is perfect for adding action and operation to your railroad. The multi-story building has an elevated cattle chute, attached office, power plant, roof-top details, colorful decals -- everything you need, including four dressed beef for the loading dock.
Elevated Tank - Kit
24 foot diameter by 30 foot tall
Description
The Rix Elevated Tank is a generic tank which can give any industry a unique look. Tank measures a scale 24 foot diameter by 30 foot tall. Kit is molded in a silver color.
HO Farmers Grain and Stock CO
This small HO scale elevator will fit nicely on any size layout.
It includes the Scale, Office, and Unloading Shed.
Features include: peel & stick windows, doors, and trim; drive in ramps with laser-scribed decking; tabbed and slotted wall construction; positionable doors; access ladder; white metal grain spout; simulated standing seam metal roofing; and a color sign sheet.
The assembled kit measures
6in long x 5.5in wide x 7in high.
HO NSC 3294 Mechanical Reefer - Painted/ Unlettered Car
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
HO Custom Crates - REA (5pk)
Pre-painted green crates. Labeled with Railway Express Agency.
Detailed Information
MODEL FEATURES:
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
McHenry scale knuckle spring couplers installed
Painted and printed for realistic decoration
Weighted for trouble free operation
33in machined metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
The use of ice to refrigerate and preserve food dates back to prehistoric times. Through the ages, the seasonal harvesting of snow and ice was a regular practice of many cultures. By the turn of the 20th century, manufactured ice became more common. The Pacific Fruit Express (PFE), for example, maintained seven natural harvesting facilities, and operated 18 artificial ice plants. Their largest plant (located in Roseville, California) produced 1,100 tons of ice daily, and Rosevilles docks could accommodate up to 254 cars. At the industry’s peak, 1,200,000 tons of ice was produced for refrigerator car use annually.
A late-19th century wood-bodied reefer required re-icing every 250 miles (400 km) to 400 miles (640 km). The typical ice-bunker reefer from the 1920s were originally constructed with wood sheathing. Later, these early wood constructed cars would be replaced with steel constructed cars with plywood interiors by the 1940s. Vents in the bunker at the end of the car, along with slots in the wood floor racks, allowed cool air to circulate around the contents.
Specifications
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1940 - 1960
Minimum Age Recommendation: 14 years
Is Assembly Required: No
HO Diesel Locomotive RS3 X Air Filters - Plastic (8pk)
Olive Green
Available in six realistic colors and great for making bushes, hedges, shrubs and trees. Each package includes 12 oz volume of material
HO Lightweight Coach - Central of New Jersey #270
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO Summer Corn Field - Green
Plant a bumper crop on any farm along your layout with this easy to use SceneMaster Corn Field kit, available in two colors (each sold separately) to match the season along your layout. Earth-colored baseplates are also included for easy assembly and installation in new or existing scenery.
FEATURES:
- x400 1 inch tall cornstalks
- Covers about 15 square inches, (100 square centimeters)
- Flocking for tassels
- Base plate for easy alignment & assembly
HO ACF PD3500 Flexi Flo Hopper -
Conrail CR Version 3(996H) Conrail Repaint-inservice 1976
Car No. 897770
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- TTX
Trailer Train 60ft Pullman-Standard bulkhead flatcar #92328
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
Diagonal Cutting Plier
Athearn Genesis HO 13,600 Gallon Acid Tank Car, Procor 3pk
Athearn Item #: ATHG25645
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Two different body phases (early and late)
Many separately applied details
Etched metal walkways
Different top platforms as appropriate per prototype
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18in
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry (TM) scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Solid Color Trim Film Waterslide Decal Sheet - Red
Solid sheets of a single color for all kinds of special effects, backgrounds or custom art.
Each sheet measures approximately 4-1/2 x 7 inches.
HO Code 100 Custom-Line(R) Crossing - 45-Degree
3 inches (7.6cm)
Atlas HO Scale Code 100 Nickel-Silver Snap Track is widely used for sectional track layouts. Each section features nickel silver rail on black molded-plastic ties with realistic wood surface detail. Snap Track features molded centerline nail holes for easy mounting with #2540 track nails. Snap track is available in a wide variety of curve radii and straight lengths and is fully compatible with Code 100 flex track and most conventional Code 100 track systems. Snap-Track is designed for use with Atlas Snap Track turnouts and crossings and can also be used with Atlas Code 100 Custom Line turnouts. Adapter track joiners #551 are available so you can also use Code 83 track on the same layout if desired.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - New Haven (Script) #30042
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .010In x 6In x 12In (4 pcs pkg)
Evergreen Scale Models 2125 .125in Opaque White Polystyrene V Groove Siding (1 Sheet)
.020in (.50mm)THICK X .125in( 3.2mm) GROOVE SPACING X .021in (.53mm) GROOVE WIDTH. GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
6in X 12in
HO Gulf Service Station - Gas Station Signs - Decals
Circa: 1936-63
Description: Gulf Service Station-Gas Station Signs - Waterslide Decal - HO Scale
HO TTC G-Class Subway - Unpowered - 2-car Train + Display Platform #5000+5001
INCLUDES: ST. CLAIR STATION PLATFORM DISPLAY BASE
Each Rapido Toronto Subway Car features:
Design created from original factory drawings and field measurements
Fully detailed interiors including seats, hand holds and lighting
Working lights: headlights, rear marker lights, destination sign
Fully detailed underbodies
Wire grab irons
DC/DCC ready or DCC/Sound (Display models are unpowered)
Display models include lighting powered by an included 12V DC power supply
Ages 14 and up. This is not a toy.
Birch Plywood Sheet - 12 x 24inch x 1/64inch Thick - Single Piece
Perfect for painting, staining, stenciling and wood burning
Cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use
1/64inch (.0156inch) Thick x 12 x 24inch (30.4 x 60.9cm)
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov
HO Scale GP38 - DCC & Sound - Norfolk Southern (High Nose w/ Ditch Lights) #2768
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO 1955 Chevy Cameo Pickup - Black, Red
This pickup is perfect for North American street and highway scenes. This detailed truck features a die cast metal body, interior seats, window glazing and authentic decoration. Perfect for rural scenes or carting loads around town, this truck is a great addition to any 1950s or later layout scene.
HO B-50-15 Boxcar - As Built w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #15371
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
HO 50Ft Ex-Post Mechanical Reefer - CPR #286280
Detailed Information
MODEL FEATURES:
Body-mounted McHenry operating scale knuckle couplers
Fully assembled and ready-to-run
Precision machined metal wheels
Wheels with RP25 contours operate on all popular brands of track
Painted and printed for realistic decoration
Weighted for optimum performance
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 15inch
Universal Switch Machine - Vertical
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC or DC power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator-control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
The Walthers Layout Control System Vertical Switch Machine features:
- Fully assembled, servo-based unit with approximately one second throw speed
- Integrated DCC accessory decoder
- Two built-in 5A switches to power turnout frogs, signals, track blocks and more
- Self-locking mechanism for reliable positioning - servo power turns off when motion is complete
- Adjustable throw and tension from 1/32 inch to 1/2 inch for turnouts in any scale from Z to O
- Factory-assembled with output rod in centered position for fast and easy under-benchwork mounting
- Wire in minutes with included cables
- Outputs for both single or bi-color LEDs
- Connecting cable included - easily expanded with Connecting Cable (#942-112, sold separately)
HO NSC 60ft Ingot Flat Car - RTAX Ebenezer Railcar Services
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
HO Vehicle Maintenance Facility - Kit - Set of five buildings
Prefabricated metal structures have been part of the support facilities at rail yards, intermodal terminals and industrial parks since the 1950s, and the Cornerstone Vehicle Maintenance facility makes them easy to add to your HO scale layout! Easily adapted to a wide range of similar structures, with five complete buildings, this kit is packed with possibilites and includes:
Large Shed / Office
Measures: 2-1/8 x 2-13/16 x 1-1/2 inches (5.4 x 7.1 x 3.8cm)
Single-Car Garage
Measures: 1-21/32 x 2-29/64 x 1-11/32 inches (4.2 x 6.2 x 3.4cm)
Small Storage Shed
Measures: 1-27/64 x 1-45/64 x 1 inches (3.6 x 4.3 x 2.5cm)
Office Building
Measures: 4-3/4 x 5 x 2 inches (12 x 12.7 x 5.7cm)
3-Bay Garage
Measures: 6-9/64 x 8 (at roof overhang x 3-5/16 inches (15.6 x 20.5 x 8.4cm) - overhead doors measure scale 12 x 14 ft (3.6 x 4.2m)
Tap 00-90 and Drills #62 & #56
Hand Tap and Drill Set made from High Speed Steel. Hand Taps are the versatile, and are popular for use in taping holes for the hobby industry and general tapping. Bottoming Taps are useful for threading blind holes. A bottoming tap has almost no taper at the end because it is designed to thread all the way to the bottom of its reach.
The #1059 Tap and Drill Set is used for installing 00-90 screws.
Package Includes:
(1) 00-90 Tap (bottoming style)
(1) #62 Tap Drill
(1) #56 Clearance Drill
WARNING: Cutting tools may shatter when broken. An approved form of eye protection is strongly recommended.
Acrylic Paint - B&M Blue (1oz)
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
Scenic Accent Figures - Backyard Basics (5 pkg)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism.
Peco PLS 130 SmartFrog V6
SMARTFROG
The Smartswitch(TM) system can be used to operate turnouts, semaphore signals, level crossing gates and barriers and other moving features. This Smartfrog unit facilitates changing frog polarity when using the Smartswitch system to operate turnouts. Watch the videos to see the potential uses and ease of installation of this system and see our Shows You How booklet No. 24 Operating Points and Signals.
Recommended to be used with:
Suitable for all scales and gauges up to and including Gauge 0
HO Hawker-Siddeley Van - Caboose - Canadian National - As-Delivered (Red/Orange Steps) - #79323
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
N Scale Curved Roadbed Track Section - 30-Degree 13-3/4 inches 348mm Radius (4/pkg)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
N Scenic Accent Figures - Barnyard Animals (10/pkg)
HO H21E 4-Bay Hopper - Pennsylvania (PRR Black, Plain Keystone) #747892
1961+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO RTR Thrall Rebuilt 40Ft Well Car - Trailer-Train (DTTX - Maroon Logo) #53233
(yellow, black; Large Maroon Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers, order now - limited quantity available
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
70-ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO scale Privacy Fence - Kit
Easy-to-assemble HO Scale Fences from Woodland Scenics feature modular design and include gates, detailed hinges and planter pins for easy installation. Each fence kit includes parts to build 192 scale feet of fencing. Fences for all kinds of scenes are available as part of the line of Woodland Scenics N Scale scenery details.
Loudspeakers 13mm round, 2 speakers 8 Ohms, with sound chamber
Tru Color Paint 044 - Acrylic -Penn Central Green 1 oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
DT&I #1627
Bowser ready-to-run 70-Ton Offset Hoppers are based on typical cars used across the continent for hauling coal and aggregates. Layout-ready cars feature accurate decoration, molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton Offset Hopper is a great addition to your transition or classic diesel-era car fleet.
HO Alphabets & Numbers - Extended Roman - Yellow - Waterslide Decals
HO Greenville 86Ft Double Plug Door Box Car - CSXT (Boxcar Scheme 2019+) #180651
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
CSXT -Boxcar Scheme 2019+- throws a -modern era- repaint into this release mix. This Tangent model replicates the most modern incarnation of the CSXT scheme we have found yet applied to Greenville 86Ft boxcars, starting in 2019. For those keeping score, this is a former Chessie C&O 1978 car, with its 5-grab body style and body mounted brake hardware. The times, they are a-changin, and this car has an updated appearance for 2019-2020+ layouts. Notice the lack of a COTS panel on the paint job, vertical conspicuity striping, the correct placement of the large tackboard near the reporting marks, and the modification of the -third arm- layout on the left hand door. Those yellow-painted grab irons look classy! We even threw in the tiny one-inch 2020 Door inspection data patch, so we apologize to the 2019 guys for technically bumping the era forward one year. This car is ready to roll behind those CSX GEs.
HO RTR 53Ft Platewall RoadRailer Trailer - Conrail/ Norfolk Southern (Triple Crown) #461427
(white, Large Logo, NS-CR Logos)
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
O (1:48) ABS 3Ft-0In STAIR (1pc)
Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision injection molded in Gray ABS Plastic. Ideal for all outdoor or profess model construction where model life is critical.
SCALE
O
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
17/64In
HEIGHT IN MM
6.7mm
WIDTH IN INCHES
7/8In
WIDTH IN MM
22.2mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
1/2In
LENGTH IN MM
300mm
HO 50ft 100-Ton 4-Bay Hopper - Conrail #498751
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from mid-1960s to mid-2000s
- Standard car for 1980s and later Powder River unit coal trains serving power plants
- Also used to transport stone and other bulk loads
- Die-cast metal underframe for excellent performance loaded or empty
- Sloped sheet braces & update brake gear
- Correct 36 inch turned metal RP-25 wheels
- Proto MAX(TM) metal knuckle couplers
21/32 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 21/32 inch
9ml pan (D) - Black
Each PanPastel Color is loaded with the highest quality artists pigments; and is made using a unique manufacturing process requiring minimal binder, resulting in rich, ultra soft and low dust colors. PanPastel Colors can be mixed for an infinite palette of colors.
Each pan contains 9ml (0.30 fl oz) of color. 40percent more than the average pastel stick, and yielding approx. 4-5 times more coverage.
GP15-1 - DCC & Sound - Chicago North Western No.4409
In the mid-1970s EMD developed the new GP15-1 model in an
effort to offer their customers a replacement for their medium sized
road switchers which were wearing out. Many railroads (i.e. ATSF,
SP & ICG) were rebuilding their older road switchers and EMD
wanted to offer them a different option. Unfortunately there were not
a lot of takers and only 310 units were built for US railroads. This
small 1,500 horsepower unit came with a radiator intake section
similar in appearance to the special one that EMD was using on
the larger SD40/45T-2 models being produced for the Rio Grande
and Southern Pacific to alleviate overheating issues in their many
tunnels. Railfans dubbed these lager units Tunnel Motors which
led to the smaller GP15-1s receiving the moniker -Baby Tunnel
motors.- Many GP15-1s remain in service today for major Class 1
railroads, regional railroads and shortlines.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED bulbs for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
CNW purchased 25 GP15-1s in 1976 to supplement their collection of used and original road switcher fleet. They could be found in local service in the Chicago area and other upper Midwest points on the CNW system. By the time of the UP merger in 1995 there were only 10 of them left in service.
CNW FEATURES:
Nose mounted Gong style bell
Nose Gyralight
1990s Traditional yellow paint scheme
ATS shoes
Separate Switch Broom included
Operating beacon
ROAD NUMBER SPECIFIC FEATURES:
No.4405
Operation Lifesaver paint scheme
No.4410
Operation Lifesaver paint scheme
No.4409
1990s Traditional yellow paint scheme