HO 1953 Ford Courier Sedan Delivery Station Wagon - Hearse (Black)
Mini Metals - Assembled
Round Speaker - 28mm
Suitable for many HO and larger models.
Dimensions: 28 x 4.5mm(D)
Frequency Response: 320 Hz - 18kHz
Power: 1 Watt (Nominal) 2 Watts (Peak)
Impedance: 8 Ohms
HO AutoScenes - Rockys Road Repair
Rocky rids the streets of potholes and puddles!
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
Custom Gas Station Junk Pile & Hazardous Material Barrel - Set 1
Painted and labeled as shown
HO Surfliner Coach w/Lights & Sound - AMTK/Redondo Beach #6404
AMTRAK SURFLINER PASSENGER CAR FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurate painting and printing featuring licensed Amtrak paint colors and artwork
- Each car individually named and numbered
- Tinted window glass
- Full end details including train line hoses & HEP receptacles
- Cab cars feature 3 different antenna arrangements per era
- Unique interior details for each car type
- Detailed paint colors including separate colors for floors, walls, seats, tables, control compartment, etc.
- Business class cars feature complete upper & lower service areas
- Cafe cars feature complete kitchen & serving area
- Interior stair & luggage rack details
- McHenry® scale knuckle couplers - Kadee® compatible
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- Packaging securely holds model for safe storage
LED LIGHT EQUIPPED FEATURES:
- LED lighting for long life and reliable operation
- On-board DCC Decoder by NCE – Operates in DCC and Analog (DC) with lighting functions controllable in DCC
- LED Interior Lights
SOUND EQUIPPED MODELS ALSO FEATURE:
- Soundtraxx Tsunami SoundCar decoder w/ exclusive sounds recorded from actual Surfliner cars
- A/C compressor operation
- Doors opening & closing with associated beep
- Generic station announcements with associated beep for PA system use
- Vacuum toilet operation sound
- Clickety Clack rail sound
- Brake system sounds including brake set & application, and emergency brake air dump sound
- Cab cars feature authentic K5LA horn and bell
- Interior LED lights on upper & lower levels
- Working marker lights on car ends
- Cab cars feature working head & ditch lights
Tru Color Paint - Acrylic - Engine Maroon - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Lackawanna (DL&W Phoebe Show) #51003
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Lightweight Coach - Erie Lackawanna #1313
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
SD70MAC Diesel, w/ DCC & Sound - PRLX #9562
Era: 1994+
Primed For Grime
EMD SD70MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
First time ever with front and rear Rubber MU hoses, Trainline hoses, Cut levers, and rear Spare
PRLX FEATURES:
Progress Rail ended up with quite a few ex BNSF units when their lease expired. While roaming the whole system, they were picked up by NS and CSX as extra lease power and can been still seen operating today.
LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PROTOTYPE SPECIFIC INFORMATION
During the early-1990s, EMD teamed-up with German engineering company Siemens to produce a freight locomotive that was capable of providing AC-traction drive currents, and thus providing a high-horsepower rating and lower fuel consumption for railroads which had an ever-increasing demand for saving fuel consumption by using a lesser amount of units to haul most of their trains.
The EMD SD70MAC was first introduced in early 1993, and began production later-on during the same year after numerous tests and improvements were made. Since then, the EMD SD70MAC has been a staple of heavy freight lines across the country.
HO Single BiLevel Commuter Car - New Mexico Rail Runner - Unnumbered Coach
Albuquerque - Series 4
Note: Unnumbered coaches do not include decals. Decals are available from highball graphics.
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO Vancouver Iron Works Piggyback Flatcar - Canadian National #688127
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
HO RTR SD40T-2 - DCC & Sound - Ohio Central #4025
OHCR FEATURES:
Ex SP
Welded/removed gyralight nose
Modified L window cab
Unique rear stripe art per road number
ROAD NUMBER #4025 FEATURES:
Standard ditchlights
Large plow
Removed/plated a/c
Body mounted K-5 horn
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Separately applied air tanks
See through cab windows
Welded ECAFB
Photoetch windshield wipers
LED Lighting
HTC truck sideframes
All-wheel electrical pickup
See-through dynamic brake fans
-Mushroom- nose vent on right side
Separately applied wire grab irons
Fully assembled and ready-to-run
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox speific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body
Painted and printed for realistic decoration
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for troublefree operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Replacement parts available including motor brushes
Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard Econami Sound by SoundTraxx
Sound units operate in both DC and DCC
Sound units operate in both DC and DCC
All functions NMRA compatible in DCC mode
Full DCC functions available when operated in DCC mode
Some functions are limited in DC
Engine, horn, and bell sounds work in DC
Slow speed control
All functions NMRA compatible in DCC mode
CV chart included in the box
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AABX #206027
AN OTTER VALLEY EXCLUSIVE
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Intermountain HO - HTTX Yellow Trailer Train
60 ft Wood Deck Flat Car
Features sharp paint and lettering, wire details, laser-cut wood decks, metal wheelsets and Kadee(R) couplers.
Late Fall Colors -60 sq. in
Excellent for indicating trees, vines, weeds, bushes or any low growth. Create desired density by simply stretching foliage material
F30A 50Ft Flat Car: Conrail MOW #59727
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
Spray Can - Clear Red (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
Models depict in-service locomotives from the mid-1990s and beyond.
Road name and road number-specific painting and lettering.
Multiple road numbers offered.
New and improved high-torque motor and drive mechanism guarantees smooth operation.**
Operating radiator fans. Improved radiator fan drive unit with quieter operation and selective fan control.**
All-wheel power pickup and all-axle drive.
Heavy die-cast, zinc alloy chassis.
AuroraJanney scale head replica couplers installed.
NMRA RP-25 wheel contour with Code 110 tread width.
Minimum radius: 18? (recommended 22?)
* Lighting functionality is limited on DC models operating on DC track power.
** Improvement over our previously-released HO scale SD60F.
DC Version Features:
DCC ready with 21MTC connector.
Dual sugar-cube speakers (functional after installation of a DCC sound decoder).
Operates on DC track.
B-10 - HO 12in Brass Chain - 20 Link
Woodland Scenics Static Grass 7mm 623 Light Green
GMD SD40-2f - DCC & Sound - CP (Rect Porthole Sill Dashes) #9021
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
HO 40Ft Hi-Cube Dry Containers - Ocean Network Express (ONE Pink) (3pk) Set #2
3 pack road numbers include : ONEU 017197/020297/020347
Body: Type A
Door: Type B
Latch: Type A
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
HO Waiting Passengers (6pk)
Bring new life to your layout with ready-to-use Walthers SceneMaster figure sets! Each figure is carefully sculpted with realistic detail and hand-painted (unless noted).
Evergreen Scale Models 9904 - .010in Yellow Transparent Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
1/8In Fluorescent Red Rod (7pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Red
HEIGHT IN INCHES
1/8In
HEIGHT IN MM
3.2mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
HO 89Ft Bethlehem Flush-Deck Flatcar - TTX #156225
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers
Refinery Piping
Includes overhead supports, angles and other fixtures. Modular design allows for many possible configurations to fit your refinery complex
HO Scale Spoked Wheels - 8pkg
These wheels are from our 1929 6 speed delivery van kit. They are 0.34inch in diameter. There are 8 wheels in this kit.
HO 53ft Railgon Gondola - Conrail #587183
(Boxcar Red, white, Quality Logo)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO GE Dash 9-44CW - DC/DCC Ready - Burlington Northern Santa Fe (BNSF Heritage I) #999
BNSF FEATURES:
High-mounted number boards
K3 horn
Front ditch lights
ATSF -Gullwing- cab
Standard brass bell
Part of the first new BNSF locomotive order to be painted in the then new official corporate colors, these -Heritage- GE units became affectionately known by railfans as -Pumpkins- based upon the Great Northern colors used on some early diesels. Some are still running today in this scheme.
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO GP9 - DCC & Sound - New York Central #7517
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 53ft GSC Bulkhead Flatcar - Northern Pacific #67159
FEATURES:
- One-time run of these car numbers, limited quantity available, order now!
- Now with die cast metal body for excellent performance empty or loaded
- Limited-edition - one-time run of these car numbers!
- Prototypes in service from 1950s to early 2000s - some in work train service today
- Used to carry lumber, utility poles, pipe, steel shapes, rail and various building materials
- Fully assembled with finely detailed body, deck and bulkheads
- Correct 33 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO GE ES44AC - Standard DC - Canadian National (Web site) #2915
Evolution Series GEVO
Product Information
Bring the power of todays railroading to your HO layout with the WalthersMainline General Electric Evolution series diesels.
Introduced in 2005 to comply with tougher emission standards, and more known among railfans and modelers as GEVOs, these big engines have quickly become one of the most popular locos worldwide. Designated as the ES44 (Evolution Series, 4,400 horsepower), prototype variations in North American service include locos with DC or AC traction motors and buyers have also specified center idler axles, as well as high adhesion or steerable trucks.
Features of the models include:
Limited edition - one time run of these roadnumbers!
Model todays railroading at WalthersMainline prices
The most popular prototype diesel in North America
Thousands in service from 2005 to the present
Correct profile radiator grilles & roof-top walkway surface details
Easily handles 18inch radius curves (22inch or larger recommended)
Six powered axles per unit
LED Lighting includes:
High or low headlight per prototype
Working front ditch lights
Three truck styles to match prototypes:
Standard high-adhesion
Steerable
C4 A1A center idler axle
Fully assembled
Same powerful drive as WalthersProto(R) locos featuring:
Five-pole skew-wound motor
14:1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Dual machined brass flywheels
Heavy die-cast metal chassis
Constant and directional lights
Add grab irons to your model with the GE ES44 Evolution Series Diesel Detail Kit (910-250, sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
HO Trackside Oil Dealer with Storage Tanks - Kit
Product Information
Prototypes for the Walthers Cornerstone Trackside Oil Dealer with Storage Tanks could be seen along North American railroad lines beginning in the 1920s as oil became popular for heating, industrial and automotive use. Oil arrived in tank cars and was transferred into on-site storage tanks. This versatile kit allows you to arrange it to fit available space. It includes a row of five tanks complete with rooftop walkways. A corrugated storage warehouse is perfect for loading barrels into trucks. At busy locations barrels would arrive in boxcars. A corrugated office and a pump house for filling up local delivery trucks can be arranged wherever needed. The Trackside Oil Dealer with Storage Tanks is just one of a wide selection of Cornerstone railroad-served industrial buildings.
Fits small towns and city scenes from 1920s to the present
Narrow design fits easily between or along tracks - perfect for shelf layouts
Separate office and warehouse buildings
Parts for five tanks, plus piping and other details
Printed signs
Molded in five colors & clear plastic
Small Shed w/Loading Dock: 5-1/2 x 4-1/2 x 3-9/16inch (13.9 x 11.4 x 9cm)
Office w/Stairs: 4 x 4-1/2 x 3inch (10.1 x 11.4 x 7.6cm)
Tank Row: 9-7/8 x 2inch x 4-1/4inch (25 x 5 x 10.7cm)
Pump House/Truck Loader: 2-3/16 x 2 x 1-3/4inch (5.5 x 5 x 4.4cm)
40Ft Refrigerated Container [3-Pack] NYK Line Set #2
Set Numbers Include:711409, 711444, 711462
MASTER MODEL FEATURES:
Prototypically accurate Daikin reefers
40-foot High-Cube Refrigerated Container
Composite materials sandwich-sides design
Detailed picture window refrigeration unit with separate parts
ISO Type 45R1
Five hinge / four bar doors with OUT style handles
Kit - Green pkg(6)
N Scale Flexi Flo Hopper (Early) - Penn Central (Ex NYC Patchout) #897815
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO - Nathan K5 K5LLAR24 5-Chime Air Horn - Lost Wax Brass Casting
SubTerrain System - Foam Risers (4in)
2/pkg - 4 x 2-1/2 x 24 inches (10.1 cm x 6.35 cm x 60.9 cm)
Risers are generally used with incline/decline starters to create varying grades on your layout. Risers are easily flexed to form curves and work on plywood or foam bases. To install, pin in place with foam nails and attach with foam tack glue or low temp foam glue gun and glue sticks.
Evergreen Scale Models - Opaque White Polystyrene T Shape .092In x 14In (4 pcs pkg)
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21012
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Athearn - N Scale 2 Bay 2600 Covered Hopper - Winchester & Western - #4004
Flush or overhanging roof per prototype
Etched metal roofwalks
Factory installed wire roofwalk grab irons
McHenry knuckle spring couplers installed
Weighted for optimum performance
Accurately painted and printed for prototypical realism
Minimum radius: 9 3/4"
HO Tidy Track - Dust Monkeys (4pk)
Dust Monkeys are an easy, convenient way to remove dust from track and stop further accumulation during regular train operation. They hang from rolling stock axles out of sight!
With this enamel product the modeler may easily represent streaking dirt effects on ships painted in light grey. It can also be used on other issues of similar color such as aircraft or AFVs. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moistened in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look
N Scenic Accents - Firemen to the Rescue - Scenic Accents(R) -- pkg(4)
Bring your layout to life with N scale Scenic Accents figures and accents that tell your layout story with authentic detail.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - DEAX #11312
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Conifer Tree Value Pack - Ready Made Trees 2-1/2 - 4inch 6.4-10.2cm
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors.
HO SD70M - DCC & Sound - PRLX ex CSX #4685
CSX & PRLX FEATURES:
CSX units are former EMD demonstrators. In a roster increasingly dominated by GE, a group of these venerable units have been sold to Progress rail, returning the units to lease service once again.
Early Cab with nose window
Customer-installed GPS dome included in box
K5LA horn
Spare knuckles on rear pilot
Appropriately-colored MU cables
Early 5000 gallon fuel tank
Large or small snowplow per prototype
Illuminated front ditch lights; flash when horn is activated on DCC and Sound Version
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
3/16 inch OD Round Stainless Steel Rod - 22 Gauge x 12inch Long
Round Stainless Steel Rod - Not hollow (1 pc)
Outside Diameter: 3/16 inch
HO ET44 Tier 4 - DCC & Sound - Canadian National EF-644t #3118
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO EMD GP9 Phase II with Chopped Nose - Standard DC/DCC Ready - Canadian National #4010
Product Information
WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they are nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features:
One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present
Limited edition - one time run of these roadnumbers!
Scale width hood with correct contours
See-through steps
Same powerful drive as WalthersProto(R) locos featuring:
Five-pole skew-wound motor
14 to 1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Machined brass flywheel
Heavy die-cast metal chassis
Constant and directional LED headlights
21-pin DCC plug
Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately)
HO 5820 Covered Hopper - DCLX (Dow Chemical) (6pk)
Includes the following numbers, all individually packaged:
#7194
#7204
#7208
#7214
#7219
#7224
Era: 1988+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO 60ft Hi-Cube Plate F Boxcar - BNSF #761192
Bring your freight car fleet up to date in minutes with the Walthers Mainline(R) 60ft Hi-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft Hi-Cube Plate F Boxcar include:
-Limited edition - one time run of these roadnumbers
-Prototypes now in service with TTX and several railroads
-Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
-Prototypically correct roof with both X and diagonal panels
-Separately applied latch bars
-Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
-100-ton roller bearing trucks
-36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO AutoFlood III RD Coal Hopper - PGNX #1162
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
N Scale 53ft Stoughton Containers - Hub Group, Set #1 (3pk)
MODEL FEATURES:
- Fully assembled
- Magnetically stackable
- Each container individually numbered
- Razor sharp printing and painting
HO PC&F 5241 CUFT - Boxcar - Olympic Railroad (OLYR) - Single Car #75118
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Bathtub Coal Gondola - MLMX/ Sims Metal #358
Built: 10-08
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23012
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO MLW M420 - DC/DCC Ready - Canadian National (North American Scheme) #3561
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO FMC 60ft DD/SS Hi-Cube Boxcar - Norfolk Southern #620022
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
MODEL FEATURES:
- Double 8 foot Youngstown doors
- Photo-etched coupler cross-over platform
- Separately applied grab irons, end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for trouble-free operation
- Body-mounted McHenry operating scale knuckle couplers
- 70 or -100 ton roller bearing trucks with 33 or 36 inch wheels per prototype
- Machined metal wheels with RP25 contours
- Minimum radius: 18 inches
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian Pacific #304668
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Tru Color Paint - Acrylic - GO Transit Light Green - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Scale GP38 - DCC & Sound - CSX (Grey & Blue/ B Scheme) #2013
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16181
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO AutoFlood III RD Coal Hopper - UP/CMO #504366
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO GMD SD40-2 - DCC & Sound - HLCX (ex QNSL, Maroon & Blue) #6225
Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound Select decoder. Analog (DC) version has 21 pin socket for DCC module.
Bowser does not recommend LOK sound locos for use on DC layouts.
Features LokSound Select decoder, GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, Flywheels, Can motor, RP25 flange, KD couplers
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
N Scale Curved Roadbed Track Section - 30-Degree 13-3/4 inches 348mm Radius (4/pkg)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
LOCOMOTIVE FEATURES:
No.4699
Ex-EMD Lease unit. White cab roof
CSX-style GPS Dome
Large EMD plow
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
HO Master MP-36 - DCC/Sound - Metrolink #895
Features:
- Golden-white LEDs
- Realistic die-cast underframe
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Realistic lighting effects including ditch lights and in-cab light
- Metal knuckle couplers
- Detailed cab interior
- Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
- Coupler cut levers
- Multiple unit hoses and trainline hoses
- Recommended 22 inch radius with Atlas passenger cars
DCC Ready Units:
- Equipped with a speaker for easy conversion to sound with the addition of a decoder.
DCC ESU LokSound Functionality Features:
- Over 20 sound effects are available including Head-end Power (HEP), engine start-up and shutdown, prime mover sounds through all eight
notches, bell, air horn, air compressor, dynamic brakes and more.
- There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
Fox Valley Models N Bi-level Auto Rack
Conrail
Features:
Die-cast underframe
Finely Molded Details
Etched Metal Panels
Formed Wire
Sharp Painting & Lettering
Multiple Road Numbers
Die-Cast Underframe
Metal Wheelsets
Micro-Trains Trucks & Couplers
HO Lightweight Coach -VIA Rail Canada #5647
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO Scenic Accent Figures - Moms & Kids (3 Pairs)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism.
1:87 CAT 12M3 Motor Grader
Details:
1:87, Wheel Loader
Dimensions:
4 x 1½ x 1⅝ in
103 x 37 x 42 mm
HO 34Ft Ribbed Hopper - Lehigh Valley (4 pkg) #2
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Removable coal load in each car
Machined metal wheels
Mchenry scale knuckle spring couplers installed
A total of 9 different road numbers available for each road name
Minimum radius: 15inch
N Scale 4-Bay Cylindrical Grain Hopper - Santa Fe
Features include:
- NMRA profile wheels
- needle-point axles
- body-mounted E-Z Mate(R) Mark II couplers
Pikestuff 1015 HO Shingle Roof
Color : Grey
5 x 8 inch piece
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Erie #79054
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 4-Bay Cylindrical Grain Hopper - CN Demonstrator #370708
Note: Car is painted only on one side with rainbow colors like the prototype. Other side is gray.
FEATURES:
- blackened metal wheels
- body mounted couplers
- non-magnetic axles
Gunderson Multi-Max Auto Rack - BNSF
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
N Scale ACF 4600 3-Bay Covered Hopper - AEX-Ex GTW #395
MODEL FEATURES:
- Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
- Round or trough hatches
- Photo-etched metal roofwalk
- Separately applied wire grab irons and stirrup steps
- Detailed outlets
- Multiple roadnumbers
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed
- Highly-detailed, injection molded body
- Separately applied brake wheel
- Screw mounted trucks
- 100-ton trucks with 36 inch machined metal wheels
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Minimum radius: 9-3/4 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Alco RS-3 - DCC & Sound - Spokane, Portland & Seattle - as delivered - #94
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. DCC/Sound version features LokSound V5 decoder.
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504892
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
Bowser HO 50Ft 2 Door Boxcar Reading No 19243
Ready to run
Roller Bearing Trucks with 36in wheels
Knuckle couplers
HO USRA Single-Sheathed Boxcar: D&H
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO - Nathan K5 Air Horn K5HR2
Spray Can - Olive Drab (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - St. Louis San Francisco Rack/ Trailer-Train Flatcar #913614
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO 40Ft Wood Reefer - UTRX #11702
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch
Safmarine 45 Ft Corrugated Container 3PK Set 2
Numbers
464180
464181
464188
HO F89F Trailer - TTX/Brown #153247
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast underframe
- Wire formed brake plumbing
- Detailed deck
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Minimum radius: 22 inches
- Recommended radius: 24 inches
Bi-Level Auto Racks - BNSF Rack & Flat Car - Circle Logo #300100
Double-Ended Pin Vise - With 2 Double-Ended Collets
The Zona Double-Ended Pin Vise comes with two double ended collets with 0inchp.109inch or 7/64inch (0 p2.7686mm) capacity range. 3-7/8inch overall length. Four chuck sizes for drills, miniature reamers, files and small tools: 0 p.05inch, .03 p.08inch, .05 p.10inch, and .07 p.11inch.
HO Marine Industries Piggyback Flatcar - Canadian Pacific (6 pkg) #1
Includes Road Numbers:
505625, 50629, 505631, 505643, 505649, 505652
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
1:32 Ladder with Safety Cage (1pc)
Use on towers, tanks, buildings and other tall structures where a ladder is perpindicular (or 90¡) to the ground. Precision Injection Molded in Gray ABS. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
SCALE
1:32
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1In
HEIGHT IN MM
25.4mm
LENGTH IN INCHES
1/2In
LENGTH IN MM
300mm
N Scale 40ft Ballasted Deck Girder Bridge - Length, 3 Inches
Kit includes highly detailed plate girder and bracing. Features a simulated concrete deck for regular track.
HO USRA Single-Sheathed Boxcar: Reading
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Perfect for moving bulk loads of all kinds that dont require protection from the weather, the WalthersMainline 34ft 100-Ton Two-Bay Hopper is a versatile addition to HO operations!
One time run of these road numbers, order now - limited quantity available!
In service from the 1970s to the present
Used to haul ballast, sand, gravel, ore and other bulk loads
Factory-applied door and brake details
Heavy die-cast metal underframe
Add a realistic load in minutes with the cast resin Chooch Gravel Load (214-7292) sold separately
Correct 36in RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO - Nathan Diesel Air Horn (Brass Casting) - 5 Chime M5
HO GE Dash 9-44CW - DCC & Sound - Burlington Northern Santa Fe (BNSF Heritage I) #1044
BNSF FEATURES:
High-mounted number boards
K3 horn
Front ditch lights
ATSF -Gullwing- cab
Standard brass bell
Part of the first new BNSF locomotive order to be painted in the then new official corporate colors, these -Heritage- GE units became affectionately known by railfans as -Pumpkins- based upon the Great Northern colors used on some early diesels. Some are still running today in this scheme.
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO SP C-40-3 Steel Cupola Caboose - Southern Pacific (Delivery Scheme) #1210
1940+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
UPS Freight - Grey, Gold, Brown
Product Information:
Licensed replica of popular International(R) trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled & painted
Die-cast metal and plastic parts
This medium-duty truck line was introduced in the late 1980s. Powered by a Navistar DT inline six-cylinder diesel engine capable of up to 350 horsepower, the 4900 series has been a great starting point for a wide range of commercial vehicles, including delivery vans, single- and dual-axle semi tractors, as well as fire apparatus and other government applications.
HO Class D10h 4-6-0 - DCC & Sound - Dominion Atlantic #1040
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
Intermountain Railway Company 14-Panel Coalporter(R) Coal Gondola Mitsui Rail Capital MBKX (silver, blue)
#300990
HO SD38 - DCC/Sound - CanDo Rail Services #5201
CCGX FEATURES:
CanDo Rail Services is a contracting company based out of Brandon, Manitoba, Canada. They preform track maintenance for large industries, operates as a shortline, and contracts switching services in Ontario, Manitoba, and Alberta Canada.
ROAD NUMBER SPECIFIC FEATURES:
#5201
- Ex: DMIR. Short fuel tank
- triple clasp brakes
- M3 horn
- UP style plows
- all-weather windows
- ditch lights on both ends
- Classified as a SD38AC
#5202
- Ex-BLE. Medium fuel tank
- high-mount truck brakes
- M3 horn
- UP style plows
- all-weather window
- ditch lights on both ends
- Classified as a SD38AC
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Western Pacific #20006
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO PC&F 5241 CUFT - Boxcar - St. Lawrence & Atlantic (SLR) - Single Car #179
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 60ft Flat Car - Southern #152166
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO 5820 Covered Hopper - Procor/UNPX (Low Black Solid) #122674
Era: 1990s+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO Scale NSC 73Ft Centerbeam Flatcar - CP Rail #318034
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
60/40 Rosin Core Solder - 4oz (113g)
N Scale - Merchants Row III - Kit
DIMENSIONS:
6-3/8 x 3-7/8 x 2-13/16 inches (16.1 x 9.8 x 7.1cm)
FEATURES:
- Three complete stores under one roof
- Fits 1880s to present
- Perfect for small town or big city
- Colorful printed signs for a variety of stores
- Printed interior detail sheet
- Two different front cornices
- Separate stairway and downspouts
- Molded in two colors
HO RTR 52Ft Mill Gondola - Rock Island #680149
Detailed Information
MODEL FEATURES:
Body-mounted McHenry operating scale knuckle couplers
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Razor sharp painting and printing
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO 30,000 Gallon Ethanol Tank Car - UTLX #3 (3 pack)
Detailed Information
212894, 212896, 212872
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
HO ET44 Tier 4 - DCC & Sound - CSX ET44AH #3402
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO 36 Inch Ball-Bearing Insulated Brass Wheelsets (12/pkg)
Nickel Silver Plated Brass Insulated Wheelsets
These wheels follow NMRA RP-25 Standards.
One wheel is insulated from the all-metal axle.
The entire wheelset is non-magnetic.
The axle length is 1.006in (+- .004in)
28in wheels are used on modern Tri-Level Autoracks, some Bi-Level Autoracks, and some older intermodal cars such as Impack spine cars, front runners & four runners - check your prototype.
33in wheels are used on 50 & 70 ton capacity cars (CAPY approximately 150,000 LBS or less).
36in wheels are used on 100 ton capacity cars (CAPY approximately 200,000 LBS), and on all passenger cars no matter the era.
38in wheels are used on 150 ton capacity cars, primarily the center connection trucks on modern intermodal cars with 33in wheels at the coupler ends.
(Cabooses can use either 33in or 36in wheels depending on the prototype.)
The CAPY information is typically printed on model freight cars and can be used as a guide. Some cars have the wheel size printed on the sides or ends of the car in the data. If you are ever unsure of which size to use, you can simply replace the wheels currently on the car with the same size.
Wheel diameter can be measured with a caliper:
28in wheels measure (28/87.1=.321in) in HO scale.
33in wheels measure (33/87.1=.378in) in HO scale.
36in wheels measure (36/87.1=.413in) in HO scale.
38in wheels measure (38/87.1=.436in) in HO scale.
(87.1 = HO scale to prototype ratio. HO scale is 87.1 times smaller than the prototype).
HO ALCo RS-3 - DCC Ready - CN (Black) #3039
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO 60Ft Gunderson 7550 Double Door Boxcar - TTX #664211
MASTER MODEL FEATURES:
All New Tooling!
Separate ladders, hand brake and door rods
Door stirrup, unique to the 7538
Single or double plug door as per the prototype
Roof with 3 Stanray X-panels and 3 diagonal center panels
Brake arrangement offset to A end of body
Crisp, accurate lettering and paint details
1964 Dodge 330 4 Door Sedan - Unpainted and Resin Cast Kit
HO GP40-2 Diesel - DCC & Sound - Chessie/B&O/CSX #6084
CSX-B&O FEATURES:
- Offered by popular demand
- Correct horn per prototype
- Side hood mounted bell
- Chessie -mail slot- battery box doors
- Front and rear Chessie style rock plows
CSX FEATURES:
- Offered by popular demand
- Correct horn per prototype
- Side hood mounted bell
- Chessie -mail slot- battery box doors
- Front and rear Chessie style rock plows
- All-new artwork provided by noted CSX railroad experts
GP40-2 LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18 inches
SOUND-EQUPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of -In Service- equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO GE Dash 8-40C - DCC & Sound - w/ Front & Rear Ditch Lights - Canadian National #2028
First built for Union Pacific in the late 1980s by General Electric, the DASH 8-40C diesel locomotives were identified by an enlarged exhaust stack and the mounting of the dynamic brake grids in a square-like unit behind the cab, which housed an enlarged equipment blower fan. These six-axle, 4,000 hp engines are still in service today in North America.
Features:
Ditch lights (8-40CW only)
Number boards, sand fill hatch, and marker lights where appropriate by railroad (8-40CW only)
Realistic die-cast underframe
Factory-equipped with AccuMate knuckle couplers
Coupler pocket designed to accept AccuMate Proto-couplers
Highly detailed coupler cut bars
Multiple unit hoses and trainline hoses
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Directional lighting
Painted crew members
Snowplow and piping on trucks
Recommended minimum radius: 22inch
Atlas Master Series Gold Additional Features:
ESU Sound equipped
1955-56 GMC 1/2 Ton Panel Van - Unpainted and Resin Cast Kit
ALCO Steam Generator Intake Vents (Brass Castings; pkg(2)
HO Class D10g/h/j/k 4-6-0 - DCC & Sound - Unlettered High Light
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
HO PS4750 Covered Hopper - L&N Family Lines (Original 12-1980) #242070
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
LN Family Lines -Original 12-1980- is an exciting offering for us, championed by Family Lines and CSX modelers alike. Built in 1980, the L&N cars have those distinctive wider jacking tabs associated with much (but not all!) of Pullmans late production. The center sill correctly models the brake linkage -access holes- on one side of the car, just like the real ones. Notice the side posts - they are the proper -closed hole- style at the bottom. This matches the L&N order exactly. Our 100-ton Barber S-2 trucks are beige to match the body paint. This is a big scheme, and we know the Family Lines modelers have been very patient.
F30A 50Ft Flat Car: PRR 1960s Era #474272
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
CP #6260
Expected in February 2021
LOCOMOTIVE FEATURES:
Brand new model
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
EMD SD60M WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Rubber MU hoses for durability
All New Tooling
New HTC trucks feature animated spinning roller bearing caps
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
CP FEATURES:
Illuminated front and rear number boards
Illuminated front and rear added ditchlights
Split dynamic brake acess door
Winterization hatch
Large window nose door – high or low window position based on prototype
Large sand fill hatches on the nose
Standard nose bevel
SOO style rear knuckle brackets
#6260:
Era: 2012+
HO 40ft ACF Modernized Welded Boxcar - Reading #107984
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 60ft Flat Car - Southern Pacific (3pk)
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO 50ft Evans DD Plug Boxcar - HS #11471
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO B-50-15 Boxcar - As Built w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #15393
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
HO Intermountain 4-Panel Coalporter, Canadian National
CNA Website scheme
Features:
Sharp Painting and Lettering
Prototype Accurate Paint Schemes
Multiple Road Numbers
InterMountain 100 Ton Trucks with 36in Metal Wheelsets
Metal Knuckle Couplers
N Scale Mini Custom Soda Machine Set - Dr. Pepper (2)
Pre-painted and labeled chest and upright soda machine.
Green Bay & Western #7038
FEATURES:
True scale dimensions with accurate details
Weighted, detailed underframes
Equipped with AccuMate Knuckle Couplers
Trucks equipped with free-rolling metal wheels
Accurate painting and lettering
Building the Right-Sized Layout - Softcover Book
Softcover Book by Thomas Klimoski
112 Pages
Have an extra spare room in your house? Downsizing your layout? Building The Right-Sized Layout is the perfect book to help with planning a room-sized layout for your home. This new book features 5 track plans covering details on how to create a manageable layout with space, time, and resources in mind.
Youll find:
Track planning strategies
Construction techniques
Room-planning concepts
Tips on operating once your layout is built
And more!
Featuring author Thomas Klimoskis Georgia Northeastern Railroad, as well as 3 other examples of small layouts, this planning book is a must-have for model railroaders.
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Orange) #506705
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
Switch Machine With Rotating Target (Pkg12)
The RailCrew Switch Machine with Rotating Target is the only hidden switch machine guaranteed to turn heads after you install it on your layout. As well as the machine itself, it comes with three different WORKING injection plastic moulded switch stands and ten different photo-etched metal targets based on most major North American railroad designs. The target (and optional, non-working lantern – two styles) actually rotates just like the real thing. Yes, you read that correctly. The unit also comes complete with SPDT auxiliary contacts to power frogs and signals.
This innovative new product features:
Compact 1 1/8 Inch(28.5mm) diameter x 1 Inch (25mm) height
Easy to install on existing layouts
Museum-quality switch stands with rotating targets
Racor 17B (tall), 31B (tall) and 20C (low) switch stands ALL included!
Momentary 12V DC power – power numerous machines off of one power supply.
Strong enough to throw and hold the points but it wont break them
SPDT auxiliary contacts to power frogs and signals
Low-profile, compact design – its really tiny
Work with all layout types, including multi-deck and portable layouts
Available in singles, 6-packs or 12-packs
Switch stands and targets also available separately
All Scale Learning Kit - River/Waterfall
Learn to create the illusion of water depth, make a river and a waterfall.
Realistic Water will model a river approximately 1 in w x 28 in l x 1/8 in d (2.54 cm x 71.1 cm x 3.17 mm).
Water Effects will model a waterfall approximately 1 1/4 in w x 5 in l x 3/32 in d (3.17 cm x 12.7 cm x 2.38 mm).
Value-packed tools specifically developed to teach beginning modelers and other hobbyists how to use the Terrain and Landscape Systems. Learn to sculpt terrain, cast, color and install rocks, landscape various scenes, create paved areas, make trees, model water features and other scenic details. Reseal packages for easy storage.
Evergreen Scale Models 9903 - .010in Green Transparent Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
HO USRA Single-Sheathed Boxcar: RF&P
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO - 89ft Thrall Bi-Level Auto Carrier - Ready To Run -Ferromex
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6inch (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
Factory-installed grab irons
Separately-applied ladders and brake equipment
Ultra-smooth rolling metal axles with 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24inch radius is recommended for operation.
HO ET44 Tier 4 - DCC & Sound - Kansas City Southern #5011
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
Noch 15847 - HO Voyeurs (4 Women, 2 Males)
HO 85ft ACF Dome Lounge Coach w/lights - Union Pacific (Harriman) #9004
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
As UP transformed its Streamliners into Domeliners in 1955, 15 new Dome-Lounge Observations were delivered to bring up the rear of the flagship streamliners. Within a year however this proved to be a problem. The cars quickly lost their unique ends and were rebuilt as Dome-Lounges. Named for the famed UP-SP-CNW Streamliner, the prototype has its original windows and lighting for use at the end of the train.
1:87 1966 GM 4107 - Peter Pan
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Shell Chemical #1006
Built: NEW 9-41
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
GLa 2-Bay Hopper: New York, Ontario & Western #1312
Detail Variations:
Single Car
As operated from 1933 to the 1953
Features:
All-new tooling
Scaled from original blueprints
Die cast frame and floor for optimum weight
Full interior rivet and bracing details
Factory installed wire grab irons
K- or AB-brake gear installed as appropriate
Factory installed Kadee #158 couplers in narrow draft gear box
Turned metal wheels in correct PRR 12D-F8 trucks
Accurate paint and lettering
Multiple road numbers available for each paint scheme and railroad
HO Chemical Tankcar - Ethyl Corporation (EBAX) #6262
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Wireform safety handrails
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 15inch
EMD E8A (DC/DCC/Sound) New York Central - Cigar Band #4037
Rapidos E8 model features:
3D laser-scanned body shell
Accurate nose and roof contours
Seven different noses
Three different back ends
Two different sides – with and without lifting lug covers
Three different steam generator options
36inch fan, 48inch fan or non-dynamic brake options
Single- or dual-headlight configurations
Freight or passenger pilots
Three styles of side grills
Original porthole sides or rebuilt with blanked sides (including unique variations)
Skirted or non-skirted fuel tanks
Original square and sloped or Hyatt roller bearing journal boxes
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Complete lighting effects – headlights, class lights, backup lights, ground lights, cab lights and more
Numerous road-specific detail parts in both plastic and etched metal
Details Include:
Side portholes
No dynamic brakes
Single MU door nose, right of headlight
Freight pilot
Standard rear
Cab-side walkway
Cab side lifting lug covers
Hyatt bearing trucks
Dual steam generators, widely spaced
Vertical Farr grill
No skirts
Pilot MU hoses
HO ET44 Tier 4 - DCC & Sound - CN/100th Anniversary #3221
Road number 3108 Has a black cab roof; does not have the circle graphic on the nose
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
Bi-Level Auto Racks - BNSF Rack & Flat Car - Circle Logo #300292
HO Brass CPR RS-3 #8435 DC/Nonsound- Estate Brass Locomotive
Display picture is accurate to the item being sold.
Pre-owned, but in great condition!
Comes in the original Box!
This brass unit has been left unpainted
Please note that this item is final sale.
No refunds or exchanges.
HO 73Ft Center Partition Car - Union Pacific #275189
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
HO GE Dash 9-44CW - DCC & Sound - Burlington Northern Santa Fe (BNSF Wedge) #4433
BNSF FEATURES:
High-mounted number boards
K3 horn
Front ditch lights
ATSF -Gullwing- cab
Standard brass bell
Part of BNSFs order in 1999, these were originally painted in the -Heritage 2- scheme from the factory. Over time with normal wear and tear, these units paint began to fade. As they got outshopped for major repairs, some were repainted into BNSFs current -Wedge- scheme. It was also common to see different variations of paint and parts used. Air conditioners and antennas were commonly changed out over time as seen on other equipment. We offer these variations based on collected research photos.
ROAD NUMBER SPECIFIC FEATURES:
#4433 Standard large dome antenna
#4437 Large dome antenna with dual -Skate- style antennas
#4484 Standard large dome antenna
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Kalmar Container & Trailer Crane - Kit
(Photo shows assembled model)
FEATURES:
- Update your HO intermodal terminal with this SceneMaster vehicle kit featuring:
- Designed for easy assembly - illustrated step-by-step instructions
- Sized right for layout intermodal facilities big or small
- Build for trailer or container loading - parts for both versions included
- Positionable boom
- Build a complete terminal scene with Cornerstone Intermodal Yard Pavement (933-4120) plus - SceneMaster(TM) Trailers and Containers (each sold separately)
- Molded in 3 colors and clear plastic
HO Scale G2 AC4400CW - DCC Ready - CSX #17
CSX FEATURES:
Front ditch lights
Prime air dryer
Low number boards
Equipped with a CSX standard -tow-chain-
CSX purchased more AC4400CWs than any other railroad, spanning almost the entire production period. This includes three of the first six produced which have distinctive spotting features compared to all other units. A lightning bolt graphic was applied under the road number making these easy to identify as AC traction motors. Unique to CSX, all these units are equipped with hooks to carry a length of chain under the walkway.
ROAD NUMBER SPECIFIC FEATURES:
#1
Named Spirit of West Virginia
One of the original six AC4400CWs built
Re-trucked and renumbered from the originally delivered 9100 series
Holden K5H Horn
early body with central air intake forwards
unique angled grab irons on top of the nose
radiator grills on right side are evenly sized (a feature that didnt last with later models)
unevenly spaced rear grab irons
vertical handrail behind invertor cabinet
extended range dynamic brakes
early no-notch fuel tank
bolted on fuel tank
PTC antenna array
GE Steerable trucks.
#17
K5LAR24 horn
PTC antenna array
early body features
central air intake in forward position
early no-notch fuel tank
bolted on fuel tank
unevenly spaced rear grab irons
vertical handrail behind inverter cabinet
lipped Exhaust tub
extended dynamic brakes
GE Hi-Adhesion trucks
struts on all 4 corners of each truck
delivered with inside struts but modified to outside braced struts. This model represents the later modified version.
#420
K5LAR24 horn
late body features
central air intake moved rearward
late fuel tank with notch
fuel tank welded to frame
evenly spaced rear grab iron
handrail behind invertor cabinet jogged for capacitor box
two handrails above inverter cabinet
late antenna package
GE steerable trucks.
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO Russell Snowplow - Toronto, Hamilton & Buffalo #X786
OTTER VALLEY EXCLUSIVE!!
Limited Edition - One Time Run of TH&B!
- Completely New Tool from Rails to Roof
- Prototypes in Service 1920s to Present
- Fully-Assembled, Railroad Ready
- Factory-Installed Grab Irons
- Complete Underbody w/Brake Gear & Piping
- Custom Front Truck for Tighter Curves
- Detailed Flanger
- Thin Profile Stirrups
- Window Glass
- Ultra-Smooth Rolling Metal Axles & 33 inch Wheelsets
- Proto MAX(TM) Metal Knuckle Couplers
- Railroad-Specific Details:
- See-Through Steel or Original Wood Roofwalks
- Sturdy Hinged & Positionable Side Wings in Two Styles w/Wire Cross Braces
- Fitted w/Original or One of Three Styles of Late Headlights as Appropriate
- Bettendorf or Roller Bearing Rear Truck
MicroBond Advanced Adhesive for Slippery Plastics - MicroPrep (1-1/2oz)
Made especially for gluing slippery engineering plastics such as Delrin, Celcon and others, this adhesive system is ideal for attaching and repairing the handrails and other fine details on many of todays cars and locos. MicroBond has sheer strength and stands up to expansion and contraction of different materials, so it can be used on rubber, assorted ABS and styrene plastics, brass, steel, resins, leather, wood and more (not intended for foam surfaces). Bonds in one minute, cures in five. When using with engineering plastics, treat the bonding surface with MicroPrep (sold separately) before gluing.
When working with difficult to bond surfaces, such as those made of Delrin, Celcon and other engineering plastics, apply MicroPrep first. Simply apply with brush or use the spray action nozzle and allow to evaporate before gluing with MicroBond (sold separately) or painting with your favorite paint (enamels tend to adhere better after longer evaporation).
HO 100-Ton Open Hopper - Southern Pacific #481144
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
HO Trinity RAF 53C 5-Unit Spine Car Set - Trailer Train TTAX #555010 (5pkg)
HO 1954-Present Red Stop Signs - 10pkg
Product Information
Keep traffic moving safely on your HO layout when you install these stop signs along busy streets, highways and more. Introduced in 1954 in a then-new color scheme of red and white to make them stand out from the many different types of yellow and black signs in use, this is the style still used today. The set comes with 10 factory-painted and printed signs, ready to install in new or existing scenes in minutes.
DC/DCC/Sound - MLW FB-2 Canadian Pacific (script lettering) #4466
FB-2 and FPB-2 models feature:
Operating back up lights. As appropriate.
Roadname specific details with or without dynamic brakes. As appropriate.
The only HO scale Alco/MLW B unit with accurate phase details including vertical or horizontal battery box louvers and etched metal Farr or mesh side grilles.
Canadian or American cast Type B trucks. As appropriate.
Full underbody piping and conduit.
Correct roadname and manufacturer specific FB-2 and FPB-2 fuel tanks.
Canadian Pacific features:
Phase 2 body with horizontal battery box louvers and Farr grilles.
Dymanic brakes
CP fabricated water tank
Dofasco Type B trucks
HO EMD SW9 - DC/ Silent - Louisville & Nashville (L&N Grey Scheme) #2278
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Louisville & Nashville:
Delivered in 1950
Short side handrails
Carbody style handrails
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - DEAX #11333
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO ICC B&O I-18 Steel Bay Window Caboose - Chessie System (B&O 1979+) #C-3039
Product: ICC B&O I-18 Steel Bay Window Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Gould Caboose Roller Bearing with separate brake beam part
Wheels: CNC-Machined 33inch Wheels
DC/DCC Lighting Features: Interior lights (Dim!), -Box- marker lamps and Red FRA flashing end light
Chessie System (B&O) -1979+- illustrates Chessie I-18s that have been modernized. Specifically, these 1973 Chessie DuBois paint jobs are being offered in their 1979 configuration. What does that mean for these models? First, the Pyle side markers have been replaced with the later era Chessie Box Markers. Gone is the underframe toilet pipe, replaced with the waste holding tank and chlorinator. FRA red flashers have been installed on the ends. And of course, we have duplicated the little lettering additions and changes along the way, like updated COTS panels. Each of these models is slightly different, as we duplicate the specific side and end lettering nuances of the prototype numbers. Lighting features include prototypically dim interior lights, lit box markers, and red flashing end lights. The FRA flashing red end light is worth noting - it has the correct flash rate and decay of the real thing. No -generic- LED flash here!
Bob Smith Industries 141 Foam Cure, 30ml
HO GP9 DCC Ready - Toronto, Hamilton, & Buffalo #402
ERA: Early 1960-1970s
THB FEATURES:
-Steam Generator Intake & Exhaust
-Long hood nose mounted bell
-Separate ACI plates included
-Roof mounted air tanks
TH&Bs 3 steam generator equipped GP9s began service in 1954 and effectively vanquished steam on this small Canadian railroad. Their time in passenger service was relatively short and they served out their time in freight service all the way into the CP Rail era.
LOCOMOTIVE FEATURES:
-Trainline and MU hoses
-Coupler cut levers
-Drop steps unless noted
-MU stands
-Nub style walkway tread
-Bell placement & type per prototype
-Fine-scale handrails for scale appearance
-Wire grab irons
-Lift rings
-Windshield wipers
-See-through cab windows and full cab interior
-Etched metal radiator intake grilles and fan grilles
-Air tanks mounted below sill unless noted
-Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
-Blomberg-B trucks with appropriate bearing caps
-Sander lines
-Speed recorder unless noted
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately-painted and printed paint schemes
-Body-mounted McHenry operating scale knuckle couplers
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
-All-wheel drive with precision gears for smooth and quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-Bidirectional constant LED lighting so headlight brightness remains constant
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds the model for safe storage
-Replacement parts available
-Minimum radius: 18in
SOUND EQUPPED MODELS ALSO FEATURE
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
HO EMD GP40 - DCC & Sound - SSW/ Cotton Belt #7607
1966+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO ACF 3560 Covered Hopper - Chessie System (C&O) #601322
Features:
-True scale dimensions with accurate details
-Weighted, detailed underframes
-Equipped with AccuMate Knuckle Couplers
-Trucks equipped with free-rolling metal wheels
-Accurate painting and lettering
Built-&-Ready Landmark Structures - Davenport Department Store
Assembled - 5-1/8 x 3-7/8 inches (13 x 9.8cm)
Dress up any downtown corner in minutes with this classic Victorian structure. The fully assembled, painted and detailed building features a two-story corner turret, first-floor display windows complete with mannequins and a variety of window treatments on the second and third floors. Finishing touches include full roof details, wrought-iron balconies and fire escape, signage, awnings and light fixtures
HO ACF PD3500 Flexi Flo Hopper -
Conrail CR Version 3(996H) Conrail Repaint-inservice 1976
Car No. 897690
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14036
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO GE C30-7 - DCC Ready - ATSF Santa Fe (Early Scheme) #8012
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Lackawanna (DL&W Phoebe Show) #51212
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1808
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
N Scale AutoFlood III RD Coal Hopper - UP/CMO #504409
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO Blunami BLU-PNP8 - 8 Function Bluetooth Controlled Sound Decoder - Baldwin & Other Diesels
Blunami will change the way you enjoy the model railroading hobby! The BLU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturers diesel models such as those made by Atlas, Athearn, and Intermountain Models. It is suitable for a wide variety of models from HO to S scale. It can be operated in three different ways: DC, DCC, and Wireless mode. Using the Blunami App, you can operate your locomotive incredibly easily.
Need Help Choosing a Sound Profile?
We have tons of sounds to match a wide range of locomotives. So many, in fact, we cannot fit them all on one decoder. Therefore, they are broken up into sound profiles of like sounds (EMD, GE, ALCO, etc.). If you do not know which sound profile you need, the best place to start is the Sound Selection References. These will list all the prime movers or exhaust chuffs available on each sound profile.
DYNAMIC DIGITAL EXHAUST :
For added realism, you will love our reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to create the most realistic experience possible.
HIGH-QUALITY SOUND LIBRARY:
Our large selection of sound effects includes:
- Up to 12 Prime Movers in each sound profile
- Up to 12 Bells
- 40+ Airhorns
- Additional couplers, cab chatter, and more!
ADDED REALISM:
Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, and more.
EASY INSTALLATION:
This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.
This 2-amp, universal-style format includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.
Dimensions: 74 x 17 x 5mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 8
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7V ? 22V
Sound Channels: 16
HO 40ft 16K Gallon Tank Car - Cargill/CRGX #4531
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Juneco Scale Models Vise on Stand (2/pkg)
HO 1973 Kenworth K100 Aerodyne Sleeper Cab Tractor
HO NSC 64 Ft 6000 Cubic Gondola HS - IMRX #2288
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Juneco Scale Models Replacement Steps for Athearn F-Units (2/pkg)
HO RTR 48Ft Containers - Conquest #1 (3pkg)
Detailed Information
MODEL FEATURES:
Fully assembled
Easily stackable
Each container is individually numbered
Goes perfectly with the Husky Stack Car
HO NSC 64 Ft 6000 Cubic Gondola HS - NMPX/ Niagara Metals #2352
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
N Scale 3230 Covered Hopper - Chicago Freight Car (CRDX) #3100
Features:
- All new tooling
- Ready to run
- Injection molded plastic
- Fine scale detail
- Etched metal roofwalks
- Crisp painting and printing
- Magnetic couplers
- Metal wheelsets
The Trinity 3230 Pressure Differential (PD) covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Yellow) #506191
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
HO ACF 5250 Covered Hopper - Hercules Pro-Fax (HPCX) #50395
Features:
Ready to run
Injection molded plastic
Fine scale detail
Etched metal roof walk
Metal knuckle couplers
Road specific hatch and outlet configurations
Road specific roof walk variations
Three body style variations
Separately applied wire grab irons and wire brake lines
Crisp painting/printing
Free-rolling 100-ton trucks
N Scale Flexi Flo Hopper (Late) - CR (Conrail Repaint) #897690
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
Flat Brushable Acrylic - Pullman Green - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
HO GE Dash 9-44CW - DC/DCC Ready - Quebec, North Shore & Labrador QNSL #413
QNSL FEATURES:
Front and rear marker lights (fully functional in DCC mode)
Low mounted number boards
K3 horn
Front ditch lights
Standard brass bell
Purchased in 1998 to help replace their aging fleet of older EMDs, Quebec, North Shore and Labrador turned to GE for 11 new high horsepower Dash 9 C-44CW locomotives. Painted in a bright orange and yellow scheme, these units were used in heavy iron ore service along the north shore of Quebec, Canada.
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO Greenville 86Ft Quad Plug Door Box Car - BS-84 Claytor Repaint 1987+ - Southern (NS) #42415
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Southern (SOU) NS-era -BS-84 Claytor Repaint 1987+- is a very common 1980s paint job in the world of auto parts cars, this one for the Norfolk Southern (NS) system. After the NS merger, NS continued to paint cars in pre-NS schemes, this -Claytor scheme- repaint included. The Southern cars were built in February of 1970 as part of a lot that included the distinctive Center-Of-Car cushioning details. We have duplicated those same features underneath and on the ends, with the extended draft gear. The Claytor repaint features the original Apex crossover platforms with a Universal brake stand and brakewheel. Check out those gorgeous new 70-Ton Barber S-2 Birdsboro Foundry trucks with rotating -Timken- roller bearing caps, just like the prototype. These beauties are available with four road numbers!
HO TM High-Cube Container - ESIU, Set #2
Contains Numbers: 10007, 10012, 10023, 10045
MASTER MODEL FEATURES:
Prototypical paint schemes
Simulated forklift pockets
Detailed chain securement
Fire port on one side
OIF and OEF US (Sand/Light Brown) Modern Vehicles Streaking Effects - Enamel Paint - 35ml
Ideal color for creating dirt steaks on sand and light brown colored vehicles. Also suitable for other effects such as add chromatic richness to any pice or surface. These days, the streaking dirt effect is one of the many effects that we can find on nearly all of the American vehicles. This dirt is a very specific color characteristic when it is seen over the American sand color FS 33446. This color will make the work easier and you can achieve an extremely realistic finish to your model. Just shake well and it is ready to use. Apply lines from the upper part of plate and then fade with a clean brush moist with Enamel Thinner.
HO ACF 5250 Covered Hopper - ADM Molecule (ADMX) #85007
Features:
Ready to run
Injection molded plastic
Fine scale detail
Etched metal roof walk
Metal knuckle couplers
Road specific hatch and outlet configurations
Road specific roof walk variations
Three body style variations
Separately applied wire grab irons and wire brake lines
Crisp painting/printing
Free-rolling 100-ton trucks
ONR Short Barrel Ore Car - Unpainted and Resin Cast Kit
HO EMD SD10 - DCC & Sound - Milwaukee Road #546
Milwaukee Road
- SD10 model designation given by Milwaukee Road for their capital rebuild program of their old SD7s and SD9s
- A first in HO Scale plastic models
- Single fuel tank
Chopped short hood and modified cab
- Later style Horst air intake
- Rotary beacon
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO 50Ft FMC 5283 DD Boxcar - BNSF #223961
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Positionable sliding double doors
Body-mounted McHenry operating scale knuckle couplers
Painted and printed for realistic decoration
Precision machined metal wheels
Highly-detailed, injection molded body
Weighted for optimum performance
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
N Budd RDC-1 (Ph 1) - DC/DCC/Sound - New York Central (Stripes)
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height
N Scale 60ft Coach Car - Toronto, Hamilton, & Buffalo #72
FEATURES:
- Based upon C&NW and CNJ prototypes
- Full scale dimensions and details
- All cars include separately applied window glazing, diaphragms and roof vents
- Observation car includes separately applied end railing details and a drumhead
- Detailed interiors (excluding baggage car)
- AccuMate operating knuckle couplers
N Scale Fire Station (Scale: 50 x 40ft) - Blue
Product Information
This kit is designed with cut lines on the back side of the walls so that you can choose the height of the building. Walls are 24 scale feet high with cut lines to produce a 20, or 16 foot tall building. Side walls have door and window openings provided. End walls have cut lines for door and window locations. Includes doors, windows and down spouts. Measures a scale 50 x 40 (15.2 x 12.2m) scale feet.
HO Scenic Accent Figures - Pedestrians Going Places (6 pkg)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism.
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - Denver & Rio Grande Western(TM) Rack /Trailer-Train Flatcar TTKX #802631
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO Value Line RTR - 13 Panel Coalporter - Conrail #503044
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO 53ft Singamas Corrugated-Side Container - Canadian Tire
(red, white, green)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes
Talus - Medium Buff (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings, and/or road cuts. Intermix grades and blend shades for the most realism. Color natural talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle talus and secure with scenic cement (#191).
Particle size - Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
Cool White
Small in size, big in brightness. Ready to plug into Light Hub, sold separately. Simulates individual bulb. 30AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug.
Simply plug into Light Hub, sold separately. 24AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug
B-100-40 Boxcar: Golden West - Ventura County - Single Car #140000
Detail Variations:
6-pack includes the following numbers:
#140000
#140003
#140008
#140011
#140013
#140016
Our B-100-40 model features the following details:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Genuine Kadee #158 Whisker couplers
Newly tooled trucks with turned metal 36 Inch wheels
Separate door rods and door tracks
Road number specific number patches
Separately applied coupler cut levers
HO NSC Ballast Hopper - CP Rail (Branchline) (6pkg)
1978+
6-Pack includes the following numbers, all individually packaged: #456030, #456077, #456107, #456145, #456191, #456220
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
50Ft Berwick Box Car - Detroit Toledo and Ironton
#18872
MODEL FEATURES:
Ready-To-Run
Full under body detail with brake rigging
Overhanging X-panel roof
Non-terminating sine wave ends
Separately applied wire grabs
Detailed end ladders and brake gear
Accurate painting and printing
Blackened metal wheels
AccuMate couplers
HO GE 44 Tonner Phase III - DC/DCC/Sound - Southern (Tuxedo Scheme) #1953
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
Flexible Cut Stone Wall w/Self-Adhesive Backing - Small Stones
DIMENSIONS:
13 x 3-3/8 inches (33 x 8.6cm)
Fully detailed and painted, these flexible stone walls are easy to cut, curve and form. The interconnecting design and peel-&-stick backing makes installation easy so you will have a realistic wall in no time. Walls are available in several stone sizes to fit your layout.
ITLA ScaleModels Inc HO 4170 Albany Manufacturing Co
The HO scale Albany Manufacturing Co. kit features unique laser etchings on all wall surfaces that can be highlighted with hand brushed acrylic paint to become significant weathered and eroding surfaces.
Finely etched details such as exposed Rebar and weathered masonry...
This kit also features the following...
A configurable footprint ... build it into a 4-walled structure 3in L x 3in W x 3.5in H
OR a Shallow Relief format 12in L x 0.5in W x 3.5in H
Separate Window Headers & Sills allow for easy painting
A Colour Sign Sheet includes Albany Mfg Co. name and many wall posters
Multiple Roof Top and Wall details included ...
Dual Snorkel Vents
Roof Access Hatch
Laser etched Brick Chimney
Wall Venting and Exhaust Ducting
Loading Dock Awning, Corrugated Skirting, Pallets, Access Ladder
Electrical Meter, Junction Boxes, Conduit, Coal Door and Fire Hose connections
Finely cut 2nd Floor Exit Platform and Access Ladder
Access Steps/Staircase/Railings
This kit is easily painted with basic matte spray paints and simple water based acrylics
HO GP9RM Mother & Slug - DCC Ready - Canadian National (Late) #7203, 253
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
The GP9RM Slug features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks with outside brake shoes or Flexicoil trucks
Traction motor details on gearbox
Detailed walkway tread
Metal side handrails
Footboard pilots or curved plate pilots on appropriate road numbers
Working head lights
Both models are available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO RTR 60Ft Flat Car- TTX #91208
MODEL FEATURES:
Separately applied end details and brake wheel
33inch machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Decorated models fully-assembled and ready to run out of the box
Minimum radius: 18inch
60ft Pullman-Standard Flatcar - Ready to Run -- TTX VTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Vallejo 73801 - Model Wash - Weathering FX - Industrial Thick Mud - 40mL Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Blue Grey is recommended for vehicles with a Panzer Grey base color, as well as all vehicles with a similar grey base.
HO MLW M420 - DCC & Sound - Canadian National (North American Scheme) #3567
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO UAC TurboTrain (DC/DCC/Sound): VIA #1 - 5 Car Set
#146-201-256-228-151
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model.
HO GMD SD40-2 - DCC & Sound - CP Rail: As Delivered #5659
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
N Scale Railroad Decal Set - Algoma Central (AC) - FP9 Diesels 1995+
HO AutoScenes - Backhoe
Intricately detailed vintage backhoe makes a great addition to any layout construction scene. Includes two figures.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
ReadyGrass Mat Roll - 25 x 33inch - Spring Grass
25 x 33inch (63.5 x 83.8cm)
Product Information
Quick Ground Cover for Grassy Scenes
Ideal for any scene where you want realistic grass, this non-shedding, vinyl-backed grass mat is easily cut to fit any scene. Attach to your layout base with adhesive (sold separately) or leave it loose so your can roll it up and use it for future projects.
HO 45ft CIMC Container - Hanjin
(blue, white)
FEATURES:
- Based on common size & style used worldwide
- Fully-assembled & ready to use
- Colorful paint & lettering schemes
- Separate door latch details
- Realistic loads for WalthersMainline(R) & WalthersProto(R) well cars, sold separately
- Great detail for terminals, highways & industrial scenes
HO 53ft Railgon Gondola - CSX #484509
(black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Double Plug MU Cables (4)
HO SD60 - DCC/Sound - EMD #2
MODEL FEATURES:
Locomotives come with railroad-specific details including: Operating beacon (in DCC/Sound version), horn, winterized hatch, antenna, handrails, etc.
SPECIFICATIONS:
DCC: Equipped with Econami2
PROTOTYPE MANUFACTURER: EMD
Axles: 6
LIGHTED: LED Lighting
PROTOTYPE AND BACKGROUND INFO:
In 1984, Electro-Motive (EMD) introduced the 60 series locomotive. These had many improvements over the earlier models including features such as: New and improved EMD 710 power plant producing 3600 HP, wheel slip control, computerized cabinet replacing the older and unreliable components.
This design spawned into many other upgrades within its class like the modernized wide cab, Isolated cab, and even the start of AC traction technology.
These locomotives were suited for just about any mainline service that could be thrown at them. The model was fairly popular with class one railroads, with Norfolk Southern purchasing the most at 151 units. Most of them are still in service today. Norfolk Southern in 2010 started a large full rebuild program of their SD60s (including purchasing cores from other sources) into SD60Es, which rebuilt them from the frame up with new electrical components and a newly designed cab to improve visibility and forward crash impact safety.
HO Trinity 3230 Covered Hopper - Greenbrier Management Services (BNBX) #95486
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
The Trinity 3230 Pressure Differential covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
HO Ground Cover Leaves - Reddish-Brown (50g)
FEATURES:
- Available in realistic spring, summer and fall colors
- Can be used for HO and larger scales
- Realistic leaf scatter material
- Great for forest floor or under trees
- Ready to use
- Upgrade existing trees for added realism
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - Great Northern Rack/ Trailer-Train Flatcar RTTX #501905
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers
N Tri Star Industries (Scale: 70 x 60ft) - Blue
Product Information
Kit can be built 16, 20 or 24 scale feet tall. End walls and side walls have door openings provided. Rear walls have cut lines for optional door openings. Includes doors, windows, vent, downspouts, foundation and steps. Measures a scale 70 x 60ft.
HO Urban Retaining Walls - Kit
The Urban Retaining Walls kit features:
- Simplifies modeling elevated tracks in new or existing scenery
- Easy to use with Urban Overpass kits & Elevated Commuter Station (both sold separately) - adaptable to other bridge kits
- Simulates poured concrete walls built from the 1920s on
- Great value with 60 parts molded in concrete gray including the following:
- 8 tall, 4-panel retaining walls each 8 x 2-1/2 inches
- 8 short, 4-panel retaining walls each 8 x 1 inch
- 8 tall connectors
- 8 short connectors
- 8 customizable end plates (use with Overpasses or Elevated Station kits, each sold separately)
- Railings
- 8 short wall supports
- 4 short wall corner connectors
- Easily expanded by combining kits and customized with molded cut lines
HO Code 100 Double Slip Insulfrog Crossing
Double slips can save valuable space at station approaches, junctions, etc.
If you wish to mix wheel standards on your 00/H0 layout, this is the trackage to choose. Code 100 rail allows flange depths up to 1.6mm which means that both vintage and current stock will run happily together.
The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make it easy to build convenient, complex and aesthetically pleasing formations using combinations of small, medium and large radius turnouts and crossings.
Technical Specification:
Length: 249mm
Frog Angle: 12 Degrees
USE:
SL10 Conducting Rail Joiners: Nickel Silver for PECO Code 100 track
SL11 Insulated Rail Joiners for PECO Code 100 track
SL14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork
60Ft PS-1 Boxcar - Grand Trunk Western - BCR #383516
Beginning in the 1960s, automakers approached rail carriers with the desire for larger freight cars to transport auto parts from suppliers to manufacturing centers. In response, the 60Ft auto parts boxcar was introduced. Carrying a wide variety of auto components including engine blocks, transmissions, brake drums, and others, these cars were a fixture throughout North America for the next four decades and can still be found in service today. Often times, entire trains of auto parts and related cars could be seen near major production facilities as automakers switched to just-in-time delivery methods, requiring prompt deliveries from the railroads providing service. It was common to see trains consisting of 50Ft, 60Ft, and 86Ft boxcars, specially modified flat cars to carry lightweight chassis, and autoracks all destined for one auto or truck manufacturing facility. As the auto industry supply chains evolved and manufacturing facilities were consolidated, many of the 60Ft boxcars were used in other markets and could be found hauling a variety of goods including appliances, paper goods, cardboard, and similar items.
HO RTR 70 Ton 2 Ballast Hopper w/ Side Chutes - ATSF #177273
Blt. 5-57
Product Information
Perfect for work train service on our railroad, Bowser HO Scale ready-to-run 70-Ton 2-Bay Ballast Hoppers with Side Chutes (Ballast Gates) feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make these 70-Ton Ballast Hoppers welcome additions to any diesel-era freight train consist.
HO Enterprise 2-Bay Covered Hopper - Canadian National (MOW Grey) #53308
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
Tangent Scale Models HO PS4750 Covered Hopper PVGX -Peavey Delivery 5-1980
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
PVGX -Peavey Delivery 5-1980- Peavey was a large grain products shipper with elevators scattered around the Midwest from Duluth-Superior to New Orleans, these cars were found on all corners of the North American railroad network, for example, cars photographed on the SP in San Luis Obispo! This Peavey blue car includes a sharp red-orange PEAVEY across the center of the car. Most small stenciling is white, and this car includes the distinctive North American Car leasing logo to denote its ownership status
HO Siemens ALC-42 Charger - Amtrak
Based on the highly successful SC-44 Charger, the ALC-42 is designed specifically for cross-country service on Americas most scenic and storied routes, displaying an updated appearance with a new nose profile and cab door configuration. Thanks to both Siemens and Amtrak(R), Bachmanns ALC-42 has been developed using original design documentation and employs prototype field recordings for maximum realism. Features include a TCS WOWSound(R) CD-quality 16-bit 44,100Hz decoder with Audio Assist(R) for easy configuration without CVs, and a Keep-Alive(R) device for uninterrupted operation, even over dirty track. The WOWSound(R) diesel-electric locomotive package includes an authentic horn, bell, prime mover, startup/shutdown, compressor, cooling fan, coupler close/release, brake release/application, crew alert, grade crossing quill, station announcements, and more.
Features include:
DCC sound-equipped for sound, speed, direction, and lighting control
TCS true CD quality audio in 16-bit 44,100Hz sound
Keep-Alive(R) device that keeps your engine running during power interruptions due to dirty track or loss of electrical contact
voice-guided Audio Assist(R) programming tool for easy set-up of almost all decoder functionality
dual-mode NMRA-compliant decoder
directional headlights
interior corridor work lights
marker lights
steady/alternate flashing ditch lights
die-cast frame
separately applied windshield wipers, grab irons and detail parts
performs best on 22in radius curves or greater
HO 16,000-Gallon Clay Slurry Tank - JMHX #71017
MODEL FEATURES:
- Separately applied fittings nozzle, manway, and small safety valve nozzle
- See-through Photo-etched metal walkways and end platforms
- Full brake plumbing and rigging including brake wheel, air reservoir cylinder, triple valve, brake linkage, trainline, brake rod, large brake
- Printed marking on the sides, ends, and top of the tank body
- Fine scale side ladders
- Placard holders
- Printed marking on the sides, ends, and top of the tank body
- Equipped with McHenry AAR upper/lower shelf couplers
- 36 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Multi-packs feature unique road numbers
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Kaolin, a fine white clay, is produced by the natural chemical weathering of aluminum silicate minerals such as feldspar. Mined in the southeast United States (primarily Georgia and Florida), kaolin is used in the manufacture of ceramics, bricks, light bulbs, cosmetics, medicines and food additives. The largest use is in the manufacturing of paper, especially in creating glossy paper. Kaolin is shipped both as a dry powder in covered hoppers and in tank cars with water as a slurry. In the slurry form the weight of water requires the tank cars be smaller capacity compared to other liquids such as ethanol and LPG. Identical tank cars are also used to haul calcium carbonate slurry, used in the making of lime and cement.
One of the more modern versions of the 16K Gallon Tank car is designed and manufactured by UTLX Manufacturing Inc (formerly Union Tank Car). The car is a 286K (referring to a 286,000 pound gross rail load limit) design with a capacity of approximately 16,000 gallons. The capacity varies slightly between UTLX and Englehard, the operators of the cars. The car is an AAR Plate C clearance car with a 111-inch I.D. tank and an overall length of 44 feet. For a complete bottom unloading the car incorporates a Funnel-Flow design. The cars are lined and kept in dedicated service to avoid cross-contamination.
HO SP C-40-3 Steel Cupola Caboose - Sierra Railroad #8
1970+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
HO AutoFlood III RD Coal Hopper - GLFX #8109
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Built-&-Ready Landmark Structures - Old Windmill
Assembled - 3-3/8 x 2-3/16 inches
(8.57 x 5.55 cm)
2-11/32 inch Vertical Railing (2pcs)
Use for hand rails, stair rails, roof trusses, grating and other steel structures. Precision Injection Molded in Styrene Plastic. May also be used for trellises, fencing window bars, etc.
SCALE
ALL
MATERIAL
STYRENE
COLOR
VARIOUS
HEIGHT IN INCHES
2-11/32
HEIGHT IN MM
59.5mm
WIDTH IN INCHES
1/4
WIDTH IN MM
6.4mm
THICKNESS IN INCHES
.085
THICKNESSS IN MM
2.2mm
LENGTH IN INCHES
5
LENGTH IN MM
125mm
HO EMD GP9 Phase 2 w/High Hood - DCC & Sound - GTW #4448
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
Product Information
The WalthersMainline Phase II High-Hood GP9 is a must-have model for your first-generation diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as -phase two- GP9s. Like its prototypes, many still going strong today, the WalthersMainline Phase II High Hood GP9 is the perfect power for any assignment and features:
Standard high short hood
Based on as-built units produced from 1955 to 1957 (Phase II)
Limited edition - one time run of these roadnumbers!
Scale width hood with correct contours
With or without dynamic brakes as appropriate
Front and rear footboards
See-through steps
Same powerful drive as WalthersProto(R) locos featuring:
Five-pole skew-wound motor
14 to 1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Machined brass flywheel
Heavy die-cast metal chassis
Constant and directional LED headlights
21-pin DCC plug
Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately)
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Conrail
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - MRRX #4864
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
DT&I #1638
Bowser ready-to-run 70-Ton Offset Hoppers are based on typical cars used across the continent for hauling coal and aggregates. Layout-ready cars feature accurate decoration, molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton Offset Hopper is a great addition to your transition or classic diesel-era car fleet.
HO Concrete Staircase - 3pkg
Description
Concrete steps (As seen on the Tri-Star Ind. building. 541-0020)
Dimensions: 4 x 6 x 4 scale feet. 1/2 wide X 13/16 deep X 1/2 inches tall. 3 each.
Trinity 3-Bay Hopper - BORX, pkg(3) #1
ETA: October 2021
Detailed Information
MODEL FEATURES:
Two body styles represent 10-panel and 12-panel variations
New body styles N including BNSF with stiffeners
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Coupler cutbar and Air hose on each end
Separately applied end cages and etched end platforms
Photo-etched metal roofwalk
Weighted for trouble free operation
Machined metal wheels
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Standard size coupler draft gear box with screw mounted lid
Fully assembled and ready for your layout
Replacement parts available
Minimum radius: 18inch
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
PROTOTYPE AND BACKGROUND INFO:
Trinity Steel was founded by C. J. Bender in Dallas in 1933. The company didnt enter into the railroad freight car market until 1984, when Trinity acquired the railcar designs and production facilities of the Pullman-Standard Car Manufacturing Company, once the largest railcar manufacturer in North America. That same year Trinity also acquired the railcar designs of General American Transportation Corporation. In 1986 the rail car designs and production facilities of Greenville Steel Car Company were purchased, including the auto rack designs of Portec-Paragon. Also acquired in 1986 were the railcar designs of North American Car Corporation, and in 1987 Ortner Freight Car was acquired.
With this collective experience across several facilities, Trinity developed many new designs that became ubiquitous to present day railroading. One of their most famous designs is the 3-bay 5161cuft covered hopper. This covered hopper is optimized to transport agricultural products, sugar, dry chemicals, or other similar products and can be seen in unit train assignments all over North America. Introduced around 1995, these cars are extremely common today and owned by many Class 1 and short line railroads alike.
Plastruct 91001 ABS .010 Grey Sheet (5pcs pkg)
Specifications In Inches :
Thickness: .010 (0.3 mm)
Width: 7 (175mm)
Length: 12 (300mm)
HO G2 SD80MAC - DCC Ready - Ex-CR Norfolk Southern #7212
Detailed Information
NS FEATURES:
Former CR units
Faded paint effect and cab number patching per road number
Removed red marker lights
Correct horn per road number
After the 1999 split of CR, a batch of SD80MACs went to NS. They were hastily patched into new NS numbers while keeping the original CR scheme for a while.
ROAD NUMBER SPECIFIC FEATURES:
#7200
Black nose anti-glare patch
5-chime horn
white patch with black numbers.
#7212
Faded to white anti-glare nose patch
Leslie 3-chime horn
Black patch with white numbers.
#7215
Faded to white anti-glare nose patch
Leslie 3-chime horn
White patch with black numbers.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO Auto-Max Carrier - BNSF/Wedge #314325
Era: Late 2000+
MODEL FEATURES:
- Separately applied ladders, brake rigging, stirrups, and handbrake details
- Simulated corrugated roof
- Full articulation with flexible diaphragm
- Safety striping
- 70-ton roller bearing trucks
- 33 inch machined metal wheels with RP25 contours
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
In 1999, Gunderson began production of the Auto-Max articulated auto rack car. This unique car can carry 22 SUVs on three sets of internal ramps. Measuring over 140 feet long and 20 feet tall from the railhead, the Auto-Max pushes the operational and clearance limits of the railroad industry.
1:32 ABS Hand Rail (1pc)
Use for hand rails on platforms, walkways, balconies and any other elevated structures with public access. Precision Injection Molded in Gray ABS.
Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
Tip: ABS hand rails may be curved to fit circular applications by softening them in warm water or heating with a hair dryer.
SCALE
1:32
HEIGHT IN INCHES
1-11/32In
HEIGHT IN MM
34.1mm
WIDTH IN INCHES
2-1/4In
WIDTH IN MM
57.2mm
LENGTH IN INCHES
24In
HO New Look Bus Edmonton Transit - Route 38 to University #514 Deluxe
White Scheme
Deluxe New Look Bus models also feature:
Interior lighting
Working headlights and tail lights
Illuminated front destination sign
Painted seatback handrails
Two-tone seats (where appropriate)
A 9-12 volt DC power supply (not included) is required to power the lighting features.
HO 40Ft PS-1 Boxcar - Santa Fe (Bx57 Chief) #31343
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
HO NSC 64 Ft 6000 Cubic Gondola HS - NMPX/ Niagara Metals #2365
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended.
HO SD9043MAC - DCC Ready - Canadian Pacific #3712
ETA: October 2023
Detailed Information
CP FEATURES:
Nathan 3-chime horn
Large EMD plow
Front ditch lights
In 2021, CP went on the used locomotive market and purchased a small batch of ex-UP SD9043MACs. These were quickly patched still in their UP numbers, and released into service. CP 3747 was neatly re-lettered with CP initials and still features the American Flag on its flanks.
ROAD NUMBER SPECIFIC FEATURES:
#3649 Ex-UP #8181, faded original paint with CP patches
#3712 Ex-UP #8229, faded original paint with CP patches
#3747 Ex-UP 8262, Flag repaint with CP patches
SD90MAC SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights
Illuminated number boards
Etched, see-through walkway steps
Dual Sugarcube speakers for optimal sound quality
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined
flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field
measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #56
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Gas Station Parking Lot Kit
With its unique design that works like sectional track, this Cornerstone kit makes it easy to build a detailed parking lot big or small on your HO layout. Molded cut lines on the back simplify cutting and fitting if needed, and separate gutters, entrance ramp and corner pieces are provided for the finishing touch. The realistic concrete color and surface can be used with Cornerstone Street System sets (each sold separately), and these parts are identical to the Parking Lot sections included with the Modern Travel Center (933-3538), Modern Gas Station (933-3537), and can also be used with the Modern Gas Station Car Wash (933-3539), each sold separately) for easy expansion.
Set of 2 sections; Each: 10-7/16 x 5-1/4 In 26.6 x 13.3cm
N Scale AutoFlood III RD Coal Hopper - CEFX #600527
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
N Scale 50Ft Boxcar - GATX (BKTY) #151068
Built in 1977 by FMC for Hartford & Slocomb Railroad, these 50Ft boxcars with Barber Roller Bearing trucks were later operated by the New Orleans Public Belt. Eventually, Union Pacific received the cars and painted them in their boxcar red scheme, with ex-Missouri-Kansas-Texas -BKTY- reporting mark and GATX lettering.
Wrapped Lumber for 50 Ft Bulkhead Flatcar - Canadian Forest - CanFor
Put your WalthersProto 50Ft CCF Bulkhead Flatcars (920-104313 to 104326, each sold separately) to work in minutes with these Walthers SceneMaster Wrapped Lumber Loads. Ready to use, each one-piece load features full-color graphics and simulated center bracing, perfect loads in-empties out operation.
Athearn - N Scale 2 Bay 2600 Covered Hopper - Burlington Northern - #430211
Flush or overhanging roof per prototype
Etched metal roofwalks
Factory installed wire roofwalk grab irons
McHenry knuckle spring couplers installed
Weighted for optimum performance
Accurately painted and printed for prototypical realism
Minimum radius: 9 3/4 "
5/16 inch OD Round Aluminum Tube - 0.035inch Thick x 12inch Long
Round Aluminum Tube (1 pc)
Outside Diameter: 5/16 inch
Left Hand
Powered solenoid turnout machine
N Scale FP45 - DCC & Sound - SF/Kodachrome #5991
Detailed Information
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
McHenry scale knuckle couplers
5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
LED headlight
Heavy die-cast frame for greater traction and more pulling power
Jewel case blister packaging securely holds for the model
Replacement parts available
Non-skid end walks
Fine-scale end handrails for scale appearance
Detailed and painted cab interior with control stand
4,000 gallon fuel tank
Flexicoil-C sideframes with high brake cylinders
Flush mounted portal window glass
Snow plow or plate welded pilot
Minimum radius: 9 3/4Inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
HO Union X-3 Tankcar - Seaboard Air Line #073152
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
Gunderson Multi-Max Auto Rack - CSX
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
N Scale 40ft Boxcars - CN Buffalo (4pk), with Jewel Cases
Road #429004, 429049, 429053, 429245
Built in the mid-1950s to carry newsprint, these 40ft boxcars with Bettendorf trucks were converted to carry grain in the late 1980s, in a project financed by the Government of Canada. They were known as Buffalo Boxcars. Canadian National is one of the largest railroads headquartered in Canada, with over 20,000 miles of track and service from Canada into the United States.
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Union Tank Car #17334
Built: 7-37
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
HO 50Ft PCF B70 Boxcar - w/ Youngstown Doors - SSW/Cotton Belt (with DFL) #66830
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
RTR 52Ft Mill Gondola, TFM #60099
MODEL FEATURES:
Fully assembled and ready for your layout
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
33In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
Open top cars, such as gondolas, have been a mainstay on railroads for decades as they are ideal for carrying large, bulky loads such as coil steel or scrap metal loaded by crane.
HO 85Ft ACF Baggage Car - Union Pacific Heritage Fleet (1st) #5779 Promontory
Product Information
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
Perfect for fan trip and excursion service
UP excursion schemes
Factory-printed car names, numbers and full-color graphics as appropriate
Factory-installed grab irons
Prototypically accurate window tinting
Correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24inch radius is recommended for operation.
Built by St. Louis Car in 1962 for mail storage service as #5752, the car was reassigned to the maintenance fleet as a tool car in 1970 and renumbered 904277. Retired in 1997, the car was held for parts until 2018, when it was refurbished for the 150th anniversary of the driving of the golden spike, named -Promontory- (the second car to carry the name), restored to its original #5752 and finished with special -Experience the Union Pacific- lettering in blue.
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
N Scale M1 Basic Oval Track Starter Set w/Kato Power Pack
Includes:
- Complete oval of track (12-3/8 inch radius)
- Grade crossing/rerailing track
- Storage Drawer for locomotives/accessories
- Kato Power Pack SX
OVR Exclusive - HO Bi-Level Auto Rack - CP Rail/TTGX #963800
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO GP9RM Mother & Slug - DCC Ready - Canadian National (Late) #7221, 256
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
The GP9RM Slug features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks with outside brake shoes or Flexicoil trucks
Traction motor details on gearbox
Detailed walkway tread
Metal side handrails
Footboard pilots or curved plate pilots on appropriate road numbers
Working head lights
Both models are available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO Enterprise 2-Bay Covered Hopper - Penn Central PC #881352
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
Kit - 33-1/2 x 3 x 11 inches 83.7 x 7.5 x 27.5cm
Part of the new Cornerstone Engineered Bridge System
For more information about the Cornerstone Engineered Bridge System click here
Prototypes provide maximum clearance for vessels on busy waterways
Low-speed motor & gear drive included
Add to new or existing scenery with Single-Track Railroad Bridge Concrete Abutments (#933-4551, sold separately)
Use with Walthers Code 83 Bridge Track (948-886, sold separately)
Has clearance for todays taller equipment
Authentic trusses, chords, counterweight & other details
Bridge tenders shanty & interlocking tower
Molded in two colors and clear plastic
HO Cornerstone Grain Surge Bin - Kit
Product Information
The Walthers Cornerstone Grain Surge Bin is an ideal addition to any diesel-era grain elevator or feed mill scene. Above the surge bin, the funnel-shaped distribution head of the grain conveyor routes grain into the proper pipe, sending it cascading into storage bins, surge bin, covered hopper or grain truck. The surge bin regulates the flow of grain into the grain dryer. The surge bin is a necessary part of any grain handling operation and will add realism to your scene.
As shown the model measures: 1-1/2 x 1-1/2 x 9inch 3.8 x 3.8 x 22.7cm
Detail and expand your grain complex with Cornerstone grain handling structures.
NOTE: Photo shows model with the Walthers Cornerstone Grain Dryer 933-3128 (directly underneath the Surge Bin) and Grain Bin 933-3123, both sold separately.
Molded in realistic color
Easy to build
Great for modern grain elevators and other industries
HO Pressureaide Covered Hopper - ACFX (Conspicuity Stripes Venturi) #51405
(white, blue, Conspicuity Stripes Venturi)
HO 85ft General American G85 Flatcar - GTTX (Yellow) #300479
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
14-Panel Coalporter(R) Coal Gondola - Ready to Run - Value Line -- Mitsui Rail Capital MBKX (silver, blue) #300962
HO AutoFlood III RD Coal Hopper - GLFX #8116
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
TH&B 40Ft steel box - Dry Transfer Lettering Sets - black and white herald; black lettering
yellow car; black and white herald; black lettering
HO 20ft Corrugated Container - Container King/CKRU #1 (3pk)
MODEL FEATURES:
- Fully-assembled
- Easily stackable
- Each container is individually numbered
PROTOTYPE AND BACKGROUND INFO:
An intermodal container is a large, standardized shipping container, designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport ? from ship to rail to truck ? without unloading and reloading their cargo. Corrugating the sheet metal used for the sides and roof contributes significantly to the containers rigidity and stacking strength, just like in corrugated iron or in cardboard boxes. International containers have castings with openings for twistlock fasteners 20 feet apart on the eight corners, to allow gripping the box from above, below, or the side, and they can be stacked up to five units high for storage.
HO NSC Ballast Hopper - Canadian National (Branchline) #90198
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO SD70M - DCC & Sound - CSX/ YnIIIb #4695
Detailed Information
CSX & PRLX FEATURES:
CSX units are former EMD demonstrators. In a roster increasingly dominated by GE, a group of these venerable units have been sold to Progress rail, returning the units to lease service once again.
Early Cab with nose window
Customer-installed GPS dome included in box
K5LA horn
Spare knuckles on rear pilot
Appropriately-colored MU cables
Early 5000 gallon fuel tank
Large or small snowplow per prototype
Illuminated front ditch lights; flash when horn is activated on DCC and Sound Version
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Model Features:
- Scaled from field measurements & diagrams of a GO F59PH
- End metal handrails with plastic stanchions
- Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
- All-metal etched grilles
- Full cab interior
- Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
- Operating headlights, rear light, and ditch lights
- GO units feature functioning tri-color class lights (white, green and red)
- American units feature functioning red marker lights
- Accurate sounds recorded from a GM 12-710G3A
- DCC/Sound units come equipped with an ESU LokSound decoder
#1 (1:32) ABS Stair Rail (1pc)
Use for hand rails on stairways. Precision Injection Molded in Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
Tip: ABS Stair Rails may be curved to fit circular application by softening them in warm water or heating with a hair dryer. Stairs may be modified to fit the circumference of a tank or other curved surface by cutting off the stair stringer from the side to be cemented. Tape the stair in place. Attach each stair step separately
SCALE
1:32
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1-5/16In
HEIGHT IN MM
33.3mm
WIDTH IN INCHES
2-1/4In
WIDTH IN MM
57.2mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
24In
LENGTH IN MM
600mm
HO Waterslide Decals - Rio Grande, Hood Diesels & Switchers (1962-1984)
HO Windmill - Built & Ready Landmark Structures
Assembled - 3-5/8 x 1-3/4 inches 9.2 x 4.5cm
HO EMD SD7 - DCC & Sound - Rio Grande (Bumble Bee) #5304
Denver & Rio Grande Western
- Correctly replicated side sill reflectors
- Short hood forward operation
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO Marine Industries Piggyback Flatcar - Canadian Pacific #505659
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
HO Kansas City-Style Post-War PCC Streetcar - DCC & Sound - SEPTA (Ex-Toronto) #2246
Maroon/Cream
Sign: 60 Richmond Westmoreland
HO Scale 36 Inch Wheelsets - Code 88 (50pk)
HO FMC 60ft DD/SS Hi-Cube Boxcar - CSX #166701
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
MODEL FEATURES:
- Double 8 foot Youngstown doors
- Photo-etched coupler cross-over platform
- Separately applied grab irons, end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for trouble-free operation
- Body-mounted McHenry operating scale knuckle couplers
- 70 or -100 ton roller bearing trucks with 33 or 36 inch wheels per prototype
- Machined metal wheels with RP25 contours
- Minimum radius: 18 inches
This kit combines the Paasche single action H-3AS, D500SR compressor and AC-7 cleaning kit.
H#3 airbrush, size 1 & 5 spray heads, 1/4 oz metal cup, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, 6 foot braided air hose, 1/8inchBSP adapter lessons booklet and manual
Specs:
Part Number: H-3AS
Type: Single Action, External mix, Siphon feed
Head Size: Size 1 (.45mm), Size 3 (.65mm), Size 5 (1.05mm)
Fluid Packing: Can spray solvent or water based fluids
Air Volume: 20 PSI at .5 CFM
Air Pressure: 20-75 PSI
Air Inlet: 1/4inch-20 Thread (Paasche thread) - adapters available
Bottle size: 1/4 oz to 8 oz bottles available
Spray Pattern: 1/32 in to 1-1/2 in
Weight: 1.1 Lbs
Finish: Chrome plated body
The D500SR airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The D500SR is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8 BPS adaptor for competitor hoses.
The compressor features include:
1/5 HP piston compressor
Regulator & moisture trap
Delivers 1-35 PSI depending on airbrush being used
Standard Paasche 1/4NPT hose fitting
1/8 BPS hose adaptor for competitor hoses
Auto shutoff feature
Carrying handle
Quiet: noise level is 47 Dbs
7 piece airbrush cleaning kit. Can be used to clean any airbrush.
Airbrush Package (H-3AS, D500SR & AC-7)
HO SD75M - DCC & Sound - Santa Fe BNSF #231
Detailed Information
BNSF FEATURES:
Faded paint colors
Small EMD plow
Round deck mounted front ditch lights
Large Sinclair antenna
Early EMD trucks with hidden bearings
Road number specific details and artwork
Part of the original Santa Fe 1994 order, these SD75Ms are depicted as late in their life. Just before they were sold to PRLX, they soldered on looking beaten and battered, but still earning revenue for their owner. Renumbered to the 8200 class in the 2000s, they eventually returned back to their original Santa Fe numbers again, but with BNSF patches.
ROAD NUMBER SPECIFIC FEATURES:
#226
Ex-ATSF 226
small cab numbers
added rear number boards
yellow frame stripes
#231
Ex-ATSF 231
large cab numbers
yellow frame stripes
#249
Ex ATSF 249
large cab numbers
yellow frame stripes
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO G2 SD80MAC - DCC Ready - CSX/YN2 #801
CSX FEATURES:
Former CR units
Operating forward and reverse red marker lights
Correct horn and antennas per road number
Approved by CSX experts
Just as a batch of SD80MACs were sent to NS after the CR split, CSX acquired a batch as well. After a short period of running around patched, they were all repainted into CSXs -YN3- scheme. Only one, CSX 801 (which was renumbered to 4591), received the -YN2- scheme. It eventually got the YN3 treatment.
ROAD NUMBER SPECIFIC FEATURES:
#801
Fresh YN2 repaint with CR details.
#4591
YN2 paint with patched numbers
K5 horn
white painted roof with GPS dome.
#4590
YN3 repaint
-Spirit of Benning-
Leslie 3-chime horn
white painted roof with GPS dome.
#4600
YN3 repaint
K-5 horn
white painted roof with GPS dome.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO SP 3/4 Dome-Lounge w/Flat Sides - Southern Pacific (General Service) #3603
-Overland Style
Rapidos SP Dome Lounge Cars Features:
Designed from original blueprints and field measurements of existing cars
Two fully-detailed interior configurations
Multi-colour interior decoration
Two underbody arrangements
Accurate interior and exterior paint and decoration
Full flicker-free track-powered interior lighting
Lighting (prototypically) in the dome roof
Accurate free-rolling trucks
Metal magnetic knuckle couplers
HO Hyundai 48ft Exterior Post - EMP #254545
PROTOTYPE TYPE:
48ft Exterior Post containers were introduced in 1986 and were a common site on nearly all double stack container trains of the later 80s, 90s, and 2000s. These containers were used for domestic freight service and were purchased by numerous railroads and freight operators in large numbers. These containers were a unique design in which the front and side container panels were supported by aluminum channel posts mounted outside of the container box to provide additional capacity space for larger pallet stacks within the container interior. The posts are a simple spotting feature for these styles of containers. Hyundai was one of a handful of manufacturers of exterior post containers, and while nearly-identical in design to one of their competitors, the additional drainage channel on the top of the container at the head end, and full-height end corner posts differentiate this container from its competitors design. Some of these containers served secondary lives for more than one operator, leading to some interesting graphic combinations over their lifespans. Changes to over-the-road length allowances for 53ft containers and trailers brought about the eventual demise of the 48ft container and a majority of them were withdrawn from service during the mid-2000s and beyond, though limited numbers still remain in service today.
FEATURES:
Hyundai Roof Configuration Version:
A unique feature of the Hyundai design was the additional water drainage channel near the front end of the container and the forward vertical framing members that extended the full height of the container. We have modeled the detail that differentiates this container from those of other manufacturers of 48ft exterior post containers.
Sharp And Accurate Paint And Lettering:
Classonemodelworks.com provides accurate paint and lettering taken from photographs of the prototype, and numbering that matches the class numbers for each operator or railroad. Our containers come with the exterior posts already painted to match the aluminum color of the prototype containers and galvanized coloring for the upper and lower structural channels.
Accurately Dimensioned:
These containers have been accurately reproduced from hand-measured field dimensions of the actual containers, right down to every visible detail. Classonemodelorks.com stands for accuracy and we strive to provide that with every model we produce.
Accurate scale Door latching Details:
Classonemodelworks.com believes in providing models that accurately depict the prototype equipment. Keeping that as our core, we are proud to provide highly-detailed cast door locking bars, latching mechanisms, door bumpers and angled bar lifter.
N Scale Mi-Jack Translift Intermodal Crane - Kit
Product Information
This Walthers Cornerstone MI-JACK Translift Intermodal Crane is based on the versatile crane that moves trailers and containers between trains and trucks or container chassis. Its wide enough to straddle the intermodal car and two rows of trailers or containers parked side by side, making short work of loading or unloading.
The completed MI-JACK Translift Intermodal Crane measures 4 x 3-1/8 x 3inch (10.1 x 7.9 x 7.6cm)
Check out the the entire range of Walthers intermodal cars and accessories.
Must-have detail for 1970s and later intermodal terminals
Used worldwide
Holds containers or trailers
Adjustable parts to model a working crane
Includes magnets to hold containers
Easy-to-build plastic kit
Molded in orange plastic
Colorful decals
Model shown assembled and painted; parts are molded in orange. MI-JACK and -Translift- are trademarks of Mi-Jack Products, used with permission.
Entry Light
Use on business structures and rural outbuildings, billboards, signs, factory docks and more. 20mA/set. RoHS Compliant.
2 Warm White LED Wall Mount Lights/pkg
HO NSC 64 Ft 6000 Cubic Gondola HS - NMPX/ Niagara Metals #2368
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO 1950s Sedan - Taxi, City Cab Company
MODEL FEATURES:
- Factory assembled with detail parts applied
- Molded interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
- Beacon or taxi sign where appropriate
HO EMD SW1200 -DC/Silent - Chicago, Rock Island & Pacific #934
(Flexicoil Trucks)
Note: Only #934 is decorated in the red speed lettering scheme!
The HO Scale Rapido SW1200 features:
- Designed from original blueprints and field measurements
- Heavy diecast frame, chassis and gearboxes for superior pulling power
- Rapidos renowned silky smooth-running drive system
- Working cab interior light and inspection lights
- Fully detailed Type A or Flexicoil trucks, as appropriate
- Full cab interior with working cab interior light and non-working fire extinguisher and fridge (where appropriate)
- Working headlights and illuminated number boards at both ends
- Some models have a rotary beacon or flasher/strobe as appropriate
- Separate handrails, including crash bars inside the cab
- Multiple exhaust stack and battery box door styles
- With or without working drop steps, as appropriate
- Incredible underbody piping and conduit detail - a Rapido hallmark!
- DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings from a 567 prime mover
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CWSX #140096
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO 60ft Flat Car - OTTX/Black Logo #91305
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
Plastruct ABS I Beam 3/32 10in
HO EMD SD7 - DC/Silent - Southern Pacific (Black Widow) #5331
Southern Pacific
- Steam generator equipment details on short hood
- Correct Mars style -ash can- light on both ends of the locomotive
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO F89-F Bi-Level Auto Rack - Northern Pacific/BTTX #913604
Detailed Information
MODEL FEATURES:
Die-cast underframe
Authentic undulating safety railing
Accurate Whitehead and Kales Auto Rack
Early or late train lines and cut levers per prototype and era
Customer installed end bridge plates (included in box where applicable)
Detailed deck
Wire-formed brake plumbing
Separately applied hand brake per prototype
Separately applied wire grab irons where applicable
Prototypical ride height
70-Ton roller bearing trucks with animated rotating bearing caps installed
Trucks with animated rotating bearing caps
Minimum radius: 22inch - Recommended radius: 24+inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
Plastruct 90450 1:16 ABS Stairway
(20.6x62.7x300mm)
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark - 6pkg #4
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
Undecorated
Die cast center beam, metal trucks, ribbed back wheels, log bunks and falling stakes. Comes with three unpainted plastic logs and couplers.
G (1:24) ABS 2Ft-6In STAIR (1pc)
Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision injection molded in Gray ABS Plastic. Ideal for all outdoor or profess model construction where model life is critical.
SCALE
G
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
17/32In
HEIGHT IN MM
13.5mm
WIDTH IN INCHES
1-7/16In
WIDTH IN MM
36.5mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
1/2In
LENGTH IN MM
300mm
HO 40Ft Boxcar w/ Early Improved Dreadnaught Ends - Great Northern (Chinese Red) #21901
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
HO 40ft Corrugated Container - Hyundai (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered
RTR 30,000 Gallon Ethanol Tank Car - GATX #202080
Detailed Information
MODEL FEATURES:
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Body-mounted, McHenry operating scale upper and lower shelf knuckle coupler
Photo-etched metal walkways and end platforms
100 ton roller bearing trucks with 36 Inch machined metal wheels
Weighted for trouble-free operation
Minimum radius: 18 Inch; Recommended radius: 22 Inch
Highly-detailed, injection-molded body
Wire safety rails and end handrails
RP25 contours operate on all popular brands of track
Window packaging with Interior plastic blister for easy viewing
All 3-packs feature unique road numbers
N Scale 48Ft Ribbed Side Container - Conrail Mercury
(White, Blue & Gray)
Product Information
Modernize your HO intermodal operations in minutes with these SceneMaster Containers, featuring:
Improved door latch detail
Great detail for terminals and industrial scenes
Realistic loads for any well car
Ready to use
HO Trinity 3-Bay Hopper - KRIX #56043
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO 85Ft General American G85 Flatcar - VTTX #300230
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
HO - SD70, DCC Ready - CN/ Ex IC #1031
CN EX IC FEATURES:
Former IC with sublettering
As modified with FRA reflective yellow frame stripe: 2005+
3 or 5 chime horn per prototype
Air conditioner
Sinclair and/or Firecracker antennas per prototype
Spare knuckle brackets
Customer-installed electronic fuel gauge included in poly bag (placement varies; consult prototype photos).
#1031:
No spare knuckle basket on walkway
Equipped with rear ditch lights
Small front plow, late fuel tank
P5 horn on stand
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
HO GP9RM - DCC Ready - Canadian National (Large Noodle) #7009
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO RTR ACF 4650 3-Bay Hopper - BNSF (New Image Green) #403348
Built: 10-07
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO GMD SD40-2f - DCC Ready - Canadian Pacific: Beaver Logo #9022
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
17/32 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 17/32 inch
Introduction to N Scale Model Railroading Book - Level 1
Product Information
The Atlas Introduction to N Scale Model Railroading - Level 1 book contains layouts N-1 through N-9. Great for beginners who want to plunge into the world of N scale model railroading. Complete with everything you need to know to build a layout including track layout and wiring with Atlas electrical components. Includes DCC wiring instructions. If youre looking for layout track plans and beginners advice check out the line of Atlas how-to books. Softcover.
Athearn Genesis HO 13,600 Gallon Acid Tank Car, Procor #16537
Athearn Item #: ATHG25644
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Two different body phases (early and late)
Many separately applied details
Etched metal walkways
Different top platforms as appropriate per prototype
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18in
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry (TM) scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
HO 66ft Bulkhead Flatcar - CP Rail (Action Red) (6pk)
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
Opaque White Polystyrene V-Groove Siding Sheet (12in x24in) .040inch Groove Spacing
1 Sheet per pack
0.020Inch thick
Groove spacing is center to center of grooves.
Product Information
Used on freight and passenger cars; as well as railroad, commercial and residential buildings. Many 19th- and early 20th-century structures had panels of V-Groove siding applied in horizontal, vertical and diagonal patterns, or in combination with clapboard and novelty siding for decorative effects. These opaque white, sheets are pre-scribed to match different widths of lumber.
1:87 NFI Xcelsior XN40: DDOT Detroit
FEATURES:
-Diecast metal.
-Pad-printed graphics.
-Very limited edition!
Antenna Mounting Stands - Style 2 - (2pcs)
HO Railroad Roman - Letters & Numbers (Black) 10inch-20inch - Waterslide Decals
Description: Railroad Roman Letters & Numbers (Black) 10inch, 14inch, 18inch, 20inch
Cal Scale Rerail Frog in Bracket Bottom Mount pkg(2)
Die cast metal
HO 53ft Jindo Container - Canadian Pacific Set #2 (3pk)
(#234456, 234467, 234474) (RED/WHITE)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting
HO SD70ACe - DCC & Sound - Union Pacific/D&RGW #1989
Overview
UP HERITAGE FEATURES:
Unique heritage paint schemes introduced in 2006
Detailed to represent the units as the look currently
PTC antenna roofs
Animated rotating roller bearing caps
Re-tooled plows with grab irons
Union Pacific unveiled 6 SD70ACe locomotives with unique -Heritage- paint schemes in 2005 and 2006 to commemorate roads which they had absorbed or merged. These roads are the MP, WP, MKT, SP, DRGW, and CNW. The locomotives are numbered after the years which the mergers took place, or, in the case of the DRGW unit, the year that Rio Grande Industries acquired the assets of Southern Pacific.
SD70ACE SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SECX #2305
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
17,600 Gallon Tank Car - ADM (Molecule) #17444
Features:
Brake rigging molded separately
Scale handrails
Metal safety bars, tank fittings and safety placards
AccuMate couplers
Screw-attached 100-ton roller-bearing trucks for added reliability
Accurate painting and lettering
Brake wheel chain
HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Mineral Red) #5012
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
HO SD-26 Gold w/ Ditchlights - DCC & Sound - Guilford Rail System (ST) w/ Conspicuity Stripes #643
Atlas Master Series Gold Features:
-ESU LokSound decoder, supporting all DCC programming modes.
-Flexible mapping of function keys F0 to F31.
-Follows all NMRA DCC standards and recommended practices.
-Lighting effects to match the prototype, including Gyralight and Mars light where appropriate.
-Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
PROTOTYPE INFORMATION:
With over 220 units produced by EMD between July 1958 and March 1963, the SD-24 locomotive generated a total of 2,400 hp with its turbocharged 567D-3 prime mover and C-C wheel arrangement. The majority of SD-24s produced were purchased by four roads: Chicago Burlington & Quincy, Santa Fe, Southern, and Union Pacific. Atlas HO scale model features details unique to each road name:
Burlington (CB&Q): High nose, single-chime air horn on short hood, Gyra-light on short hood (non-operating), winterization hatch
Santa Fe: Low nose, 3-chime horn mounted on left side of hood behind cab
Southern: High nose, 5-chime horn mounted on cab, bell detail on short hood
Union Pacific: Low nose, 3-chime horn mounted between 2nd and 3rd radiator fans, winterization hatch
Guilford 615, 643 & MAERSK (ATSF): equipped with ditch lights
PS-2 2003 2-Bay Covered Hopper - Chicago & North Western #95203
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
Hedge Row
7-3/4 x 1 to 2inch 19.6 x 2.5 x 5cm Tall
Make Realistic Scenery in Minutes
Give your layout a change of scenery with Woodland Classic Trees from Woodland Scenics. Fully assembled and ideal for foreground detail, the selection includes several types of trees along with hedgerows. The models are finely detailed with painted, flexible trunks and foliage with natural contrast to enhance any layout or diorama. A unique planting pin and detachable base allow for temporary placement, or ease of removal for cleaning and maintenance. Easily mixed and matched to capture the variety found in nature, trees range from 3/4 to 9inch tall, making them ideal for modelers in all popular scales.
HO Grass Tufts, 1/4 Inch Tall - Wildflower Patches (104pcs)
FEATURES:
- Add a splash of color to any scene
- Ready to use in new or existing scenery
- Pre-shaped and fully assembled
- Great detail anywhere flowers grow
- Mix and match with other Grass Tufts (949-1100 Series) for more variety
- Includes 104 Flowering Tufts
- Flexible transparent base
HO 59Ft Cylindrical Hopper - Scoular SCOX #1511
(yellow, brown, green; Double-Corn Logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
One time run of these roadnumbers, order now - limited quantity available
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO F30A 50Ft Flat Car MOW w/Deck Rails - Conrail (CR MOW) #58721
This car does NOT include sleeper or camp vans
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
O Scale - 81ft Great Lakes Freighter MV White Swan - Resin Cast Kit
NOW AVAILABLE IN O SCALE!!
20-1/2 inches long
Waterline resin model kit.
81ft wooden Great Lakes motor vessel
Built in 1922
Wrecked in 1956
Typical of small Great Lakes wooden ships from 1880s to 1940s
Kit includes all details needed to build a complete model!
Spray Can - Brilliant Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Evans X72 Box car: Penn Central w/ Small Logo - Single Car #266850
Detail Variations:
As operated between 1973 to 1976.
6-pack includes the following numbers:
#266577
#266850
#269268
#269320
# 269827
#269899
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
HO 1955 Chevrolet Dump Truck - Municipal Public Works
Mini Metals - Assembled
HO 57ft Mechanical Reefer - Union Pacific/ARMN #756036
Move all kinds of perishable products on your HO railroad with Walthers Mainline 57ft Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s.
Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including:
-Limited edition - one time run of these roadnumbers
-Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
-Keystone or Hydra-Cushion underframe detail as appropriate
-Short ladders and low hand brakes
-9ft Youngstown plug door with separate latch bars
-Authentic Stanray peaked, ribbed roof with capped exhaust stack
-Detailed underbody with brake gear and fuel tanks
-70-ton roller bearing trucks
-Correct 33in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
NMRA-Compatible 8-Pin Connector (4pcs)
This set of four 8-pin connectors is designed to facilitate wiring in locomotives equipped with a DCC-ready socket.
HO 50ft Covered Gondola - RI #3833
MODEL FEATURES:
- 70-ton Roller Bearing trucks
- Removable cover
- Separately-applied brake wheel
- Weighted for optimum performance
- 33 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Body-mounted McHenry operating scale knuckle couplers
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inch
PROTOTYPE AND BACKGROUND INFO:
Gondolas are low-sided railroad cars that are used for hauling bulky loads that don not need protection from the weather. The Roundhouse 50ft gondola is representative of larger cars that began appearing on the rails in the early 1950s, and many survive today working for modern roads and contractors.
HO Trinity 3230 Covered Hopper - General American (GACX) #62772
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
Detailed Information
MODEL FEATURES:
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
McHenry scale knuckle spring couplers installed
Painted and printed for realistic decoration
Weighted for trouble free operation
33in machined metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
The use of ice to refrigerate and preserve food dates back to prehistoric times. Through the ages, the seasonal harvesting of snow and ice was a regular practice of many cultures. By the turn of the 20th century, manufactured ice became more common. The Pacific Fruit Express (PFE), for example, maintained seven natural harvesting facilities, and operated 18 artificial ice plants. Their largest plant (located in Roseville, California) produced 1,100 tons of ice daily, and Rosevilles docks could accommodate up to 254 cars. At the industry’s peak, 1,200,000 tons of ice was produced for refrigerator car use annually.
A late-19th century wood-bodied reefer required re-icing every 250 miles (400 km) to 400 miles (640 km). The typical ice-bunker reefer from the 1920s were originally constructed with wood sheathing. Later, these early wood constructed cars would be replaced with steel constructed cars with plywood interiors by the 1940s. Vents in the bunker at the end of the car, along with slots in the wood floor racks, allowed cool air to circulate around the contents.
Specifications
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1940 - 1960
Minimum Age Recommendation: 14 years
Is Assembly Required: No
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Southern Pacific #33242
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Extended Vision Caboose - Chesapeake & Ohio #3209
MASTER MODEL FEATURES:
Thin endrails
Roofwalk where appropriate
Accurate painting and lettering
Roller-bearing caboose trucks
Window glazing
Metal knuckle couplers
Separate brake cylinder
Open smoke stack
Triple valve and air reservoir
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200027
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
#143 Standard Head All-Metal Whisker(R) Self-Centering Knuckle Couplers Short Centerset Shank 2 Pair
All-metal -whisker- coupler with metal self-centering spring. Designed and tested for reliability, durability and long life. Compatible with Kadee HO couplers. Fits most HO scale equipment; can be used in place of No. 5 coupler.
Walthers Layout Control System - Stall Motor Driver
Works for HO, N, Z, S, and O Scales
Using the Walthers Layout Control System Stall Motor Switch Machine Controller you can:
Easily upgrade your existing stall motor switch machines to use Walthers Layout Control System plug and play fascia controls and indicators
Works with most popular brands of stall motor switch machines
Easily mix and match existing machines with Walthers Layout Control System Switch Machines using common controls and wiring
Use with Tortoise(R), Cobalt, Hankscraft(R), Switchmaster(TM), MP1, MP5, Micro-Mark(R) Switch Tender(R), and other types of stall motors
Integrated DCC accessory decoder
Outputs for both single or bi-color LEDs
Includes 6 In (15.2cm) color-coded 3-wire motor connection cable with plug (some soldering required)
4 Ft (1.2m) Connecting power cable included - easily expanded with Extension Cable (942-113, sold separately)
Adjustable voltage output
Complete instructions with self-adhesive mounting bracket - use with Walthers Layout Control System Turnout Drill Set (942-140, sold separately)
HO 40ft Corrugated HC Container -NYK (3/pkg) Set 2
MODEL FEATURES:
-Factory assembled with many detail parts applied
-Three different road numbers per pack
-Some SKUs feature multiple logos and/or decoration variations
PROTOTYPE AND BACKGROUND INFO:
An intermodal container is a large standardized shipping container, designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport from ship to rail to truck without unloading and reloading their cargo. Forty-five foot containers such as this model are commonly used in situations where increased capacity is needed. Corrugating the sheet metal used for the sides and roof contributes significantly to the containers rigidity and stacking strength, just like in corrugated iron or in cardboard boxes. International (ISO) containers have castings with openings for twist lock fasteners at each of the eight corners, to allow gripping the box from above, below, or the side, and they can be stacked up to ten units high for storage.
HO NSC 5304 Boxcar - Canadian National (Delivery w/ Green Door) #557606
The Rapido NSC 5304 cu.ft. CN Combo Door Boxcar features:
Separate grab irons installed at the factory
100-ton Barber S-2 trucks, with metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe
Athearn HO Scale - HO 30,000 Gallon Ethanol Tank Car - UTLX - 212869
Detailed Information
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
HO Alco FA-1 - DCC & Sound - Union Pacific #1609
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO - ACF 5250 CF Hopper - Penn Central #897060
HO GE Dash 9-44CW - DC/DCC Ready - Canadian National CN #2510
CN FEATURES:
Canadian 4-window cab with high-mounted number boards
K3 horn
Front ditch lights
Front class lights
Rear single style headlight
Cab-mounted brass bell
Canadian National purchased 23 safety cab Dash 9 locomotives from GE in late 1994. Classed as -C44-9WL-, these locomotives were seen all over the system and featured a 4-window Canadian style cab, front and rear anticlimbers, and single rear headlight.
ROAD NUMBER SPECIFIC FEATURES:
#2506 Later appearance with right side yellow number board numbers and missing left side -American Continent- map art
#2510 As-delivered appearance
#2522 As-delivered appearance
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
BH1 Tsunami 2 Sound Decoder - GE Diesel
Dimensions: 97 x 16 x 7.7mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 8 LED-Friendly Outputs!
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
Get an easy upgrade for your Bachmann Sound Value diesel models with our newest Tsunami2 decoder! The TSU-BH1 offers 8 LED-friendly function outputs so resistors are not required for LEDs! (See the wiring diagrams under product documentation for more information). Light effects are fully remappable and offer full access to our 20+ HyperLight effects.
This decoder is available in 3 sound profiles EMD, GE, and ALCO. For an easy install, simply replace the Sound Value decoder and enjoy all of the Tsunami2 features you love!
This decoder is designed to replace the factory board in the following Bachmann Sound Value Diesel Models: FA-2, FB-2, S-4, E7-A, SD70ACe, ES44AC, GP30, GP38-2, GP40, GP7, and SD40-2.
Fun Tsunami2 features including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and more. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+), couplers, and more!
This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.
HO NSC Ballast Hopper - CSX (6pkg)
1980s+
6-Pack includes the following numbers, all individually packaged: #965545, #965551, #965593, #965657, #965668, #965685
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
N Scale Short Barrel Ore Hopper - CN Scale Test Car #52285
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
W&LE #78932, #80905, #80913, #80913
MODEL FEATURES:
Wire and plastic handrails, stirrup steps, ladders and underbody details
Separately applied brake gear including brake wheel, air reservoir, and brake cylinder
Bettendorf or roller bearing trucks with 33In machined metal wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers
Painted and printed for realistic decoration
Weighted for trouble-free operation
Interior plastic blister safely holds the model for convenient storage
Window packaging for easy viewing
Fully assembled
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
The development of the hopper car went along with the development of automated handling of such commodities, with automated loading and unloading facilities.
Open hopper cars are used for commodities such as coal, which can suffer exposure with less detrimental effect. Hopper cars have been used by railways worldwide whenever automated cargo handling has been desired.
3/32In Fluorescent Blue Rod (8pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
BLUE
HEIGHT IN INCHES
3/32In
HEIGHT IN MM
2.4mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
HO - Sinclair Antenna - Plastic pkg(4)
Flat Brushable Acrylic - Seasoned Brown Wood - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
HO 50ft Evans DD Plug Boxcar - LNAC #5046
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Commissary/Freight Transfer Background Building - Kit
FEATURES:
- Perfect for passenger terminals and yards
- Includes loading dock with canopy
- Modular design for easy customizing
- Trackside wall of typical three-story curtain-wall factory
- Thin-profile background building - use against your background scene
- Easily cut and customized
- Great for steam or diesel-era layouts
- Molded in appropriate colors and clear plastic
- Decals for several businesses
MEASUREMENTS:
1-12-5/8 x 3-1/4 x 6-1/8 inches
Please Note: Kit includes front and side walls only; no rear wall is needed for assembly.
Colored Weathering Powder - Medium Earth (1oz)
There are several basic methods and approaches to using these powders and we are sure you will probably develop a few of your own! These powders are intended to make rolling stock, buildings, and detail pieces look old, dirty, dusty, rusty, faded, and generally the worse for wear after being exposed to the elements of weather, travel, pollution, and mechanical wear and tear.
HO ATSF PS4750 Covered Hopper - Santa Fe (Delivery Gray 10-1979) #315965
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
ATSF -Delivery Gray 10-1979- is now available in the distinguished light gray paint with light blue -Santa Fe- lettering. This light gray scheme is very different from the previous Tangent ATSF offerings! The Santa Fe GA-905 class were built by Pullman Standard and leased from North American Car Corporation. Check out that sharp red/white/blue NACC badge! Featured details include prototypically accurate body-mounted brake hardware and scale-sized Miner -Selflok- outlet gates. We didnt stop there. This car is loaded with accurate Pullman-applied ATSF graphics and data. From the distinctive narrow style Roman numbers to individual North American Car Corp. car serial numbers on the center sill ? its all there.
N Scale NSC 5277 50Ft Plug-Door Boxcar - Canadian National CNIS #413115
MASTER MODEL FEATURES:
Bodies: 5111 or 5277 cubic foot styles
Ends: Nine or ten corrugations
Painted safety rails
Doors: 9ft or 10ft plug doors
Side Sills: Deep or shallow sills
Trucks: 70- or 100-ton
HO GMD SD40-2W - DC/DCC Ready - CN (Non Dynamic Sergeant Stripes) #5360
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
HO RTR 70 Ton 2 Ballast Hopper w/ Side Chutes - Reading & Northern #112
Product Information
Perfect for work train service on our railroad, Bowser HO Scale ready-to-run 70-Ton 2-Bay Ballast Hoppers with Side Chutes (Ballast Gates) feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make these 70-Ton Ballast Hoppers welcome additions to any diesel-era freight train consist.
HO NSC 3650 cf 66Ft Railgon - GNTX #295611
Aurora Miniatures North America Inc. is proud to offer the National Steel Car 3650 cf 66ft Railgon Gondola in HO scale. These Canadian-built modern 66? gondolas were introduced in 2012, they were assigned the GNTX reporting mark and painted in the prominent Railgon scheme with a large Tuscan red TTX logo on a yellow background. They can be found across North America in steel mill service. Similar-looking gondolas were also built for BNSF, Canadian Pacific and other owners. We are offering 20 unique GNTX numbers along with a ?Data Only? version for the first production run.
HO 36Ft RTR 3-Dome Tank Car - ACFX #4554
Product Information
Add authentic cars to your steam- or diesel-era layout with these 36Ft 3-Dome Tank Cars from WalthersMainline! Serving a wide range of both producing and consuming industries, these cars were actually three tanks in one, ideal for handling smaller amounts, and a greater variety of product at once. Features of these cars include:
One time run of these roadnumbers, limited quantity available - order now!
Prototypes hauled petroleum, chemicals and similar liquid loads in three compartments
In service from late 1920s to 1960s
Detailed underbody with AB brakes
Fully assembled
Correct 33inch turned-metal RP-25 wheelsets
Proto MAX metal knuckle couplers
HO Skyview Drive-In Theater - Kit
Actually Watch & Hear Your Favorite Movies on the Big Screen Any Time!
Simply Slide Your Tablet into the Screen to Bring Your Drive-In to Life - Remove at Any Time
Works with Most 7inch Tablets including Apple(R) Ipad mini, Amazon(R) Kindle Fire, Samsung(R) Galaxy Tab 2.0 and Many More (sold separately)
Compatible with Tablets up to 7-7/8 x 5-5/16inch (20 x 13.4 cm) and from 9/32 to 15/32inch (0.7cm to 12mm) Thick
Enjoy Full Sound Quality from Your Tablet Through Open Ports in Rear of Screen
Perfect for 1940s to Present Day Layouts
All-American Drive-In Design Complete with:
Main Screen
Projection Booth/Concession Stand Building
Drive-Through Box Office
Main Entrance Sign
24 Double Speaker Stands - Enough for 48 Cars
Colorful Printed Marquee, Entrance Signs & Screen Images
Molded in Three Colors
Concession Stand 5 x 5-1/4 x 1-1/2inch (12.7 x 13.3 x 3.8cm)
Screen 11 x 1-3/16 x 7-3/16inch (27.9 x 18.2 x 18.2cm)
Marquee: 3-5/8 x 1-1/8 x 1-7/16inch (9.2 x 2.8 x 3.6cm)
Ticket Booth: 3-5/8 x 1-1/4 x 2-3/16inch (9.2 x 3.17 x 5.5cm)
HO 4750 Cubic Foot Rib-Sided 3-Bay Covered Hopper - KCS #307428
These ready-to-run cars feature injection-molded bodies with separately applied metal grab irons and etched metal roofwalks! Cars include trucks and brass wheelsets, weights and Kadee #5 magnetic knuckle couplers.
HO 34Ft Ribbed Hopper - NYC (4 pkg) #2
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Removable coal load in each car
Machined metal wheels
Mchenry scale knuckle spring couplers installed
A total of 9 different road numbers available for each road name
Minimum radius: 15inch
Bi-Level Auto Racks - BNSF New Image - Orange Rack on TTGX Flat Car #TTGX 965341
HO 40ft Corrugated HC Container - ONE (3/pkg) Set 2
MODEL FEATURES:
-Factory assembled with many detail parts applied
-Three different road numbers per pack
-Some SKUs feature multiple logos and/or decoration variations
PROTOTYPE AND BACKGROUND INFO:
An intermodal container is a large standardized shipping container, designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport from ship to rail to truck without unloading and reloading their cargo. Forty-five foot containers such as this model are commonly used in situations where increased capacity is needed. Corrugating the sheet metal used for the sides and roof contributes significantly to the containers rigidity and stacking strength, just like in corrugated iron or in cardboard boxes. International (ISO) containers have castings with openings for twist lock fasteners at each of the eight corners, to allow gripping the box from above, below, or the side, and they can be stacked up to ten units high for storage.
Drill Bit #76 - 0.020inch Diameter (2 pkg)
Product Information
Walthers Drill Bits are the right tools for all kinds of hobby projects, from detailing locomotives and cars, to scratchbuilding, wiring and more. Theres a full range of common wire gauge - jewelers drill bit sizes from number 80 to 43, and each pack includes two ready-to-use bits. Walthers miniature hardware is a complete range of ready-to-use parts and tools for hobby projects, including wood, machine and nylon insulating screws, plus appropriate hex nuts and washers, in assorted standard sizes (machine and wood screws may be brass or brass plated). Drill Bits are part of the line of Walthers miniature hardware and tools.
Code 83 Snap Track - 9 Inches Straight
Brown Tie - 9 inches per section
N Scale NSC 64 Ft 6000 Cubic Gondola HS - MWCX #102820
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
RTR 57Ft trinity 3-unit Spine Car - TTRX #360889
Expected time of arrival : April 2021
MODEL FEATURES:
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Precision die-cast metal spine structure
Etched metal walkways
Separately applied brake piping
Highly detailed customer applied trailer hitches
53Ft trailer and container are perfect loads for the 57Ft spine car
Fine ladder detail
Weighted for optimal performance
33Inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers installed
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Machined metal wheels
Minimum radius: 20Inch
PROTOTYPE AND BACKGROUND INFO:
Intermodal transportation requires specialized rail equipment which is, on occasion, too specialized. To allow more flexibility in loading containers and trailers at terminals all-purpose spine cars were developed. These cars can be configured to allow loading of trailers of varying lengths, from 28Ft pups to 53Ft high capacity units. With the trailer hitches collapsed containers can also be loaded. 40Ft, 45Ft 48Ft and 53Ft containers call all be accommodated on these cars as well as 20Ft models provided they are mounted to a chassis.
The prototype for our model is based on a Trinity-built car owned by the TTX Company. These 70-ton cars (TTX class RAF30A) numbered TTRX 360817-361116 first appeared on the rails in the late 1990s. The Athearn model is faithful to the prototype allowing modelers to load a variety of trailers and containers.
Specifications
PROTOTYPE MANUFACTURER: Trinity
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990s+
1/4 inch OD Round Brass Tube - 0.029inch Thick x 12inch Long
Round Brass Tube (1 pc)
Outside Diameter: 1/4 inch
Spray Can - British Green (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Gulf Oil #15292
Built: BUILT 9-30
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
HO PS 40ft Boxcar w/7ft Door - Southern Pacific (Delivery 1950+) #102160
Product: Pullman-Standard Southern Pacific Lines Postwar 40ft6in Box Car with 10ft Height and 7ft Doors
Scale: HO Scale 1:87.1
Truck: Tangent ASF 50-ton A-3 Ride Control trucks
Wheels: 33 inch wheels, with front and back detail and accurate tapered axles
HO General Electric (GE) ES44AC/ ES44DC - GEVO Data - Decals
Scale: HO Scale
Equipment Type: ES44AC - ES44DC - GEVO - Data
HO GE Dash 9-44CW - DCC & Sound - Canadian National CN #2522
CN FEATURES:
Canadian 4-window cab with high-mounted number boards
K3 horn
Front ditch lights
Front class lights
Rear single style headlight
Cab-mounted brass bell
Canadian National purchased 23 safety cab Dash 9 locomotives from GE in late 1994. Classed as -C44-9WL-, these locomotives were seen all over the system and featured a 4-window Canadian style cab, front and rear anticlimbers, and single rear headlight.
ROAD NUMBER SPECIFIC FEATURES:
#2506 Later appearance with right side yellow number board numbers and missing left side -American Continent- map art
#2510 As-delivered appearance
#2522 As-delivered appearance
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - RSGX #4326
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Gone Bust Block - Kit
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
HO 89Ft Bethlehem Flush-Deck Flatcar - Santa Fe #296539
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers
HO RTR SD40 (SD40-2) - DCC Ready - FURX #3025
Detailed Information
FURX FEATURES:
SD40 rebuilds, from many sources
Front ditch lights
Correct details per road number
Rear mounted break wheel
ROAD NUMBER SPECIFIC FEATURES:
#3001
Ex-SOO. Smaller 3600 gal fuel tank
extended range dynamic brakes
large EMD plow
deck mounted front ditch lights
#3005
Ex NDM. Large 4000 gal fuell tank
extended range dynamic brakes
Canadian style plow
pilot mounted front ditch lights
#3025
Ex-MP. Large 4000 gal fuel tank
regular dynamic brakes
small EMD plow
pilot mounted front ditch lights
extra MP style jacking pads
LOCOMOTIVE FEATURES:
LED lighting
Photo-etched stainless steel windshield wipers
Fully assembled and ready-to-run
Separately applied wire grab irons
Separately applied air tanks
Coupler cut levers
Rubber MU hoses
Fine scale handrails molded in engineering plastic
Non-sound version features 21-pin NEM DCC plug
See-through dynamic brake and radiator fans
Curved radiator fan grab iron
Exhaust stack
Frame mounted bell (unless noted)
Detailed 4000 gallon fuel tank (unless different capacity is noted)
Flexicoil-C trucks with high or low brake cylinders (per prototype)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body featuring new tooling
Painted and printed for realistic decoration
See through cab windows
Bi-directional LED lighting
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
Recommended radius: 22inch
Metals Bank
Cast Hydrocal plaster walls, plastic door & windows and full color paper signs and awnings. Perfect for your business district from the cracked stucco to the rusty tin staircase, this building is just brimming with character. A real blue collar working man s bank, kit features detailed Hydrocal castings, plastic doors and complete, easy-to-understand directions.
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
HO RTR PS 4740 Covered Hopper - Illinois Central #56800
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Body-mounted McHenry operating scale knuckle couplers
36inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Multi-packs feature unique road numbers
Weighted for optimum performance
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
HO GP9 - DCC & Sound - Penn Central #7500
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 50ft Evans Double-Door Plug Boxcar - Quinault Pacific/USLX #10474
MODEL FEATURES
-Fully assembled and ready for your layout
-Separately applied end ladders, brake wheel and underbody details
-Weighted for optimum performance
-Machined RP25 profile 33in metal wheels
-McHenry scale knuckle spring couplers installed
HO EMD E8A w/HEP - DC/DCC/Sound - Burlington Northern #9915
BN E-9 Names:
#9902 -Village of Westmont-
#9904 -Village of Lisle-
#9915 -Village of Hinsdale-
#9924 -Walter T. Stanuch-
The Rapido Trains HO scale Rebuilt E8 w/HEP locomotive features:
Correct HEP muffler and hatch
Multiple dynamic brake options and fans
Sealed, twin-beam headlight configuration
Modified pilot
Blanked sides with appropriate grille work
Skirted or non-skirted fuel tanks
Hyatt roller bearing journal covers
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Accurate E8 sounds provided by ESU LokSound
Complete lighting effects headlights, class lights, backup lights, ground lights, cab lights, Stratolite or beacons and more. -Not all lighting features will work in DC mode.
Numerous road-specific detail parts in both plastic and etched metal.
HO RTR 40Ft Offset Ballast Hopper w/Load - Wisconsin Central #110
Detailed Information
MODEL FEATURES:
Removable load
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied wire grab irons and brake wheel
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Replacement parts available
Minimum radius: 15inch
Solid nickel silver wheels with RP25 contours operate on all popular brands of track
HO EMD MP15AC Diesel - DCC & Sound - SOO Line #1539
SOO FEATURES:
Ground lights
Cab beacon (effect in DCC)
Leslie 3-chime cab-mounted horn
Small fuel tank
Ratchet brake
After the 1985 acquisition of the MILW from bankruptcy, SOO inherited their MP15ACs along with other motive power. While many were simply patched and put back into service, a few got the full white and red SOO repaint treatment. Even though we have offered these numbers in the past, we thought it was time to announce these again, this time with LEDs and Tsunami 2 Sound!
MP15AC LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Lift rings
Windshield wipers
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Operating ditch lights (if equipped)
Operating ground lights
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and -printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO EMD Underframe Mount Bells (2pk)
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140018
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale Flexi Flo Hopper (Late) - Conrail (Flexi Flo Hopper Repaint) #897829
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO MLW FPA-2u & FPB-2u - DC/Silent - CN (Wet Noodle Scheme) #6758 & 6858
The entire FPA-2u and FPB-2u production is a CONDITIONAL RELEASE. If Rapido receives enough pre-orders by the order deadline, then production will proceed! If not, then they will never tool these models, and your deposit will be credited back to you.
The Rapido FPA-2u and FPB-2u models feature:
- The only HO scale MLW FPA-2u and FPB-2u units ever. Full stop. End quote.
- Operating headlights, class lights and back-up lights
- Canadian-cast Dofasco Type B trucks
- Full underbody piping and conduit
- Separate grab irons and handrails
- Correct MLW-specific large-capacity fuel tanks
- Heavy, die-cast chassis
- Rapidos improved 5-pole motor with dual flywheels
- Full, multi-color interior
- DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
- Accurate sounds recorded from the REAL FPA-2u #6758
- Improved light grey color on the CN 1961 scheme
HO 60Ft Bulkhead Flat - Southern Pacific SP #509453
MODEL FEATURES:
Separately applied end details and brake wheel
33inch machined metal wheels with RP25 contours
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
Section Hands w/ Pick, Shovel & Wheelbarrow - 3 Unpainted Figures
HO Water Sports People w/ Equipment (6 pkg)
Details Water athlete
Theres Something for Everyone in Water Sports!
The NOCH Mini Figures -Water Sports Enthusiasts- are perfect for installing on a model landscapes existing water scene. Besides surfers, boat drivers, anglers, kite surfers and sailors, on a hot summer day the water has plenty to offer and -Water Sports Enthusiasts -should not be missing! They really animate the water landscape and cater for high spirits far out on the water. With the realistic NOCH Water Effects for designing waters, the water on which the -Water Sports Enthusiasts- are active looks even more realistic.
HO Enterprise 2-Bay Covered Hopper - Canadian National (MOW Red) #53317
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
Kalmbach Publishing Book -The DCC Guide - Second Edition
Comprehensive guide helps modelers get the most out of DCC. Diagrams and photos show how DCC works, from wiring to installing decoders in locomotives.
Kit - 10 x 10 x 6 inches - 25 x 25 x 15cm
Performing everything from painting to complete rebuilds, Allied Rail Rebuilders captures the realism in a size that works on most layouts. Lots of details are included, such as an EMD 567 prime mover, separate roof vents, interior trusses, doors and windows. It can also be used for other types of heavy industry.
Algoma Central In Color by Stephen M. Timko
Released February 1, 2016
Headquartered at Sault Ste. Marie, this colorful all-EMD railroad extended directly north from the Great Lakes into the wilderness of Ontario. Although most famous for its passenger trains through the beautiful Agawa Canyon, the road was also a heavy duty freight hauler carrying lumber, mining, and steel products.
HO RTR Thrall Rebuilt 40Ft Well Car - Trailer-Train (DTTX - Red TTX and Next Road logo) #53125
(yellow, black, small red TTX and Next Road logo, yellow conspiracy marks)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers, order now - limited quantity available
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
70-ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - Chicago, Burlington & Quincy Rack/ Trailer-Train Flatcar TTKX #905083
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO 20ft Corrugated Container - Macs/MOCU #1 (3pk)
MODEL FEATURES:
- Fully-assembled
- Easily stackable
- Each container is individually numbered
PROTOTYPE AND BACKGROUND INFO:
An intermodal container is a large, standardized shipping container, designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport ? from ship to rail to truck ? without unloading and reloading their cargo. Corrugating the sheet metal used for the sides and roof contributes significantly to the containers rigidity and stacking strength, just like in corrugated iron or in cardboard boxes. International containers have castings with openings for twistlock fasteners 20 feet apart on the eight corners, to allow gripping the box from above, below, or the side, and they can be stacked up to five units high for storage.
HO Scale H1b Hudson Steam - DC/DCC Ready - Canadian Pacific (Delivery) #2810
-Early walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
Drill Bit #62 - 0.038inch Diameter (2 pkg)
Product Information
Walthers Drill Bits are the right tools for all kinds of hobby projects, from detailing locomotives and cars, to scratchbuilding, wiring and more. Theres a full range of common wire gauge - jewelers drill bit sizes from number 80 to 43, and each pack includes two ready-to-use bits. Walthers miniature hardware is a complete range of ready-to-use parts and tools for hobby projects, including wood, machine and nylon insulating screws, plus appropriate hex nuts and washers, in assorted standard sizes (machine and wood screws may be brass or brass plated). Drill Bits are part of the line of Walthers miniature hardware and tools.
HO Greenville 86Ft Quad Plug Door Box Car - BS-84 Claytor Repaint 1987+ - Southern (NS) #42409
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Southern (SOU) NS-era -BS-84 Claytor Repaint 1987+- is a very common 1980s paint job in the world of auto parts cars, this one for the Norfolk Southern (NS) system. After the NS merger, NS continued to paint cars in pre-NS schemes, this -Claytor scheme- repaint included. The Southern cars were built in February of 1970 as part of a lot that included the distinctive Center-Of-Car cushioning details. We have duplicated those same features underneath and on the ends, with the extended draft gear. The Claytor repaint features the original Apex crossover platforms with a Universal brake stand and brakewheel. Check out those gorgeous new 70-Ton Barber S-2 Birdsboro Foundry trucks with rotating -Timken- roller bearing caps, just like the prototype. These beauties are available with four road numbers!
Diesel EMD SD40-2 CSX 8811
ESU LokSound and DCC
This locomotive has working front ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5 inches
HO Alco RS-3 Phase 1 - DC/DCC Ready - Conrail (ex Erie Lackawanna) w/ Large Louvers #5545
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC.
HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (Grey, Red, Black) #7022
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Digitrax SE74 Signal Decoder
Fully connectorized installation.
Optional support for DCC 9-Aspect control mode, including Lunars.
Easy setup with Option Switches and LocoNet programming.
Configurable for four solenoid or four slow-motion turnout control.
8 Input lines for local control and sensors.
8 System routes with 8 entries each.
Advanced LocoNet configuration capability with Series7 style installation support using a DT602.
HO Thomas Saves Santa Sleigh - Train Set
Join Thomas on a magical adventure as he saves the day by bringing Santa Claus his trusty sleigh just in time for Christmas deliveries! Features Thomas with moving eyes, two festive freight cars including a Plank Wagon with Christmas Sleigh Load, Naughty or Nice Brake Van with Santa figure, and a full oval of snap-fit E-Z Track.
This ready-to-run train set includes:
- Thomas the Tank Engine with plow, holiday hat, and moving eyes
- Plank Wagon with Christmas Sleigh and international-style hook and loop couplers
- Naughty or Nice Brake Van with Santa Figure and international-style hook and loop couplers
- 47 x 38 inch oval of snap-fit E-Z Track with 12 pieces of curved track, 1 piece of straight track, and 1 plug-in terminal rerailer
- power pack and speed controller
- illustrated instruction manual
HO Value Line RTR - 13 Panel Coalporter - NYC (Conrail Quality) #505547
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52R class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO 4650 Centerflow Hopper - Wisconsin Central (CN) #87044
Features:
Etched metal roof walks
Detailed brake gear
Blackened metal wheels
Accurate painting and printing
100-ton roller-bearing trucks and body mounted AccuMate couplers with screw-attached coupler pockets.
AccuMate couplers are made under license from AccuRail, Inc.
Pre-painted & Labeled Metal Gas Pumps - Mobil
- Pre-painted and decorated with the logo of the company named.
HO 50ft Evans DD Plug Boxcar - LNAC #5087
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200095
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
Spray Can - Dull Red (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Double-Track Railroad Bridge Stone Abutment - Resin Casting
DIMENSIONS:
Approximately 5 x 3/4 x 5-7/8 inches
FEATURES:
- Common prototype design used with various types of bridges
- Fits steam, diesel and modern-eras
- Highly detailed parts
- Use with Cornerstone double-track bridges
HO SD9043MAC - DCC Ready - Union Pacific #8037
ETA: October 2023
Detailed Information
UP FEATURES:
Leslie 3-chime horn
Large EMD plow
Front ditch lights
During the horsepower race of the 1990s, EMD offered an -upgradable- SD90MAC. EMDs 6000hp 256H prime mover was still being tested for reliability and issues at the time and UP needed power quickly. To combat this, EMD offered the SD90 with the 4300hp 710 prime mover in its place until the 256H prime mover was ready to be installed after successful testing. Unfortunately, the 256H was deemed too problematic and the conversion was never completed. UP classed these as SD9043MACs. Purchased in 1996, these big brutes were initially used in coal drag service before ultimately being used in other types of service. They were factory delivered with the -We Will Deliver- slogan. By the mid 2010s, a large batch were sold to NS for rebuilding into SD70ACUs.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights
Illuminated number boards
Etched, see-through walkway steps
Dual Sugarcube speakers for optimal sound quality
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined
flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field
measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
HO Alco RS3-M Chop Nose - DCC Ready - Delaware & Hudson: Bi Centennial #1776
Photo courtesy Mike Herman Family
Delivery Expected Early 2024
Details:
RS-3 units #4115, #4106, #4107, #4113, #4122, #4112, #4119, and #4128 were rebuilt by Morrison Knudsen into RS-3m units (numbered #501-508, respectively) between December of 1975 and March of 1976. The locomotives were re-engined with the 2,000 horsepower ALCo 12-cylinder 251C engine, and the long hood was raised six inches to accommodate the larger engine. The dynamic brakes were also moved to a box behind the cab.
HO Code 83 Plastic Insulating Rail Joiners (24pcs)
Use Atlas HO Scale Code 83 Plastic Insulating Rail Joiners to join and electrically isolate sections of track. Joiners will work with any brand of Code 83 rail!
HO 60ft Gunderson Boxcar - TBOX/TTX/Patched #889298
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Fully assembled and ready-to-run
- Razor sharp painting and printing
- Weighted for optimum performance
- 36 inch metal wheels with RP25 contours
- Minimum radius: 18 inches
N Scale Concrete Tie Curved Double Super-Elevated Track - 18-7/8 & 17-5/8 Inch Radius - 22.5-Degree Easements
1 Left & 1 Right
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
Shipped from Ontario Canada
HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #676712
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OAKX #56
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO SD90MAC-H Phase I - DCC Ready - Union Pacific #8509
Detailed Information
UP FEATURES:
#8503 & #8500 represent the first renumbering, originally delivered as #8203 and #8160 respectively.
#8509, #8512, and #8520 are modeled with the starter capacitor removed and the EOT mounted further forward on the fuel tank.
Union Pacific became the only buyer of the SD90MAC-H, known to them as SD90AC, when Canadian Pacific transferred their order to the Phase 2 variant. The first 7 were considered pre-production units and wore 2-3 numbers during their lifetime. The 8500 series we are offering represents the second and third order of SD90MAC-Hs that were delivered between 1997-1999 and before their final renumbering to the 8900 series.
SD90MAC-H SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and ?printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
Mid Section Extension for Great Lakes Freighter Kit - Unpainted and Resin Cast
Picture is of Item #SSM-1050 (Great Lakes Freighter)
with extra mid section applied
HO 60ft NSC 5150 3-Bay Covered Hopper - Cargill (ICMX) #1124
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
TrainSpotter
The TrainSpotter makes detection of locomotives or rolling stock easy and reliable. Just place the sensor where its invisible light beam will reflect off the object of interest and you're done - no time-consuming or frustrating adjustments! Based on modern silicon technology, this reflective infrared proximity sensor is tolerant of ambient (background) lighting conditions, be it completely dark or under full lights, with no false triggering. Combined with a discrete under-track installation, this low-profile sensor solves many of the challenges that plague other optical detector products.
FEATURES:
- Small size (0.25 x 2.25 inches)
- Simple, discrete under-track installation
- No adjustment needed!
- Release time of zero or 5 seconds (solder jumper)
- Two opposite polarity, open-collector outputs (40V / 250mA capable)
- Tolerant of ambient (background) lighting conditions - no false triggering
- 24 inch pre-stripped wire leads attached to the sensor
- Powered from 5V to 24VDC
Typical Applications:
- Activate grade crossing signals
- Trigger sounds
- Build an automatic interchange
- Indicate end-of-track in hidden staging yards
- Detect block occupancy for signal systems
- C/MRI track occupancy inputs
Installation:
The detector is designed to be installed up through the benchwork in a 3/8 inch (10 mm) hole. Because the sensor itself is so small, only a single hole is required and no complicated drilling jigs are needed. The sensor can be secured in the hole using a variety of methods such as hot glue or by using a bracket.
Electrical Connections:
The CKT-IRSENSE needs 5 to 24 volts of clean direct current (DC) power to operate. Two opposite polarity outputs are provided, both of which are open drain (otherwise known as open collector) and act like a switch to the ground or negative lead.
Logic level outputs can be generated by connecting a resistor to pull up the output to the positive supply. Other devices, such as LEDs or relays can also be driven directly and the outputs from multiple sensors can be connected in parallel to combine them into one signal.
Specifications:
2.25(L) x 0.25(W) x 0.25(H) inches
By default, the release time is zero, but can be set to 5 seconds by shorting two pads (JP1) on the back of board.
The sensing distance varies with the reflectivity of the object being sensed, but is typically 1.5 inches.
Plastruct 90408 ABS 1in Warren Open Web Truss (2pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1
HEIGHT IN MM
25.4mm
WIDTH IN INCHES
1-27/32
WIDTH IN MM
46.8mm
THICKNESS IN INCHES
5/16
THICKNESSS IN MM
7.9mm
LENGTH IN INCHES
12
LENGTH IN MM
300mm
USE DESCRIPTION
ABS OPEN WEB TRUSS – WARREN STYLE 2 Use for roof trusses, bridges, conveyors, space frames and other steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or pro
HO Auto-Max Carrier - AOK #501571
Era: 1999+
MODEL FEATURES:
- Separately applied ladders, brake rigging, stirrups, and handbrake details
- Simulated corrugated roof
- Full articulation with flexible diaphragm
- Safety striping
- 70-ton roller bearing trucks
- 33 inch machined metal wheels with RP25 contours
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
In 1999, Gunderson began production of the Auto-Max articulated auto rack car. This unique car can carry 22 SUVs on three sets of internal ramps. Measuring over 140 feet long and 20 feet tall from the railhead, the Auto-Max pushes the operational and clearance limits of the railroad industry.
HO Chemical Tankcar - Ethyl Corporation (EBAX) #6259
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Wireform safety handrails
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 15inch
Evans X72 Box car: Conrail Large Logo - Single Car #269325
Detail Variations:
As operated between 1976 to the 1990s.
6-pack includes the following numbers:
#266873
#266899
#269252
#269325
#269377
#269423
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
Z Scale 33inch Diameter Wheel Sets - 12 axles (Brown)
DESCRIPTION
Z Scale 33inch diameter brown plastic wheel sets.
HO GE ES44AC GEVO - ESU Sound & DCC - Union Pacific #7474
FEATURES:
One time run of these roadnumbers, order now - limited quantity available
The most popular prototype diesel in North America
Thousands in service from 2003 to the present
ESU Sound for DCC and DC layouts featuring:
- 4 function outputs with brightness control by CV
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch prime mover sounds
- Compressor
- Dynamic brake
- Multiple realistic lighting effects
21-pin DCC plug
2- or 4-vent dynamic brake vent as appropriate
Easily handles 18 inch radius curves (22 inch or larger recommended)
Six powered axles per unit
LED Lighting includes:
- Correct headlight position per prototype
- Working front ditch lights
Three truck styles to match prototypes:
- Standard high-adhesion
- Steerable (nonworking)
- C4 A1A center idler axle
Same powerful drive as WalthersProto(R) locos featuring:
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant and directional LED lights
Correct profile radiator grilles and rooftop walkway surface details
Molded drill starter points for grab irons - easily added with the GE ES44 Evolution Series Diesel Detail Kit (910-250, sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Fully assembled
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
Spray Can - Champagne Gold (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Flexible Two-Lane Roadway w/Markings (100 x 8cm)
In celebration of the 50th anniversary of Bay Area Rapid Transit (BART) in 2022, Rapido Trains is very pleased to be bringing you the BART Legacy Fleet in HO Scale! Produced in close collaboration with the Bay Area Rapid Transit, this represents Rapidos first foray into the rail-based rapid transit market!
Since its opening in 1972, Bay Area Rapid Transit trains have moved commuters and riders around the San Francisco Bay Area using these iconic cars. These pioneering cars were designed specifically to reduce association with aging transit equipment used in other cities. Instead of using traditional railcar manufacturers, BART signed a contract with Rohr Industries to create their first transit vehicles and contracted industrial design firm Sundberg Ferar to develop the trains futuristic look. Besides being recognized for its status as a ground-breaking achievements of civil engineering, BART is also known for its roster of very distinctive rolling stock. The original cab and center cars (A Cars and B cars) built by Rohr Industries between 1968 and 1975 were mechanically identical, with the exception of the cab overhanging one end of the A cars. Despite being the face of the system, the streamlined fiberglass cab became an operational issue as they limited
flexibility in building trainsets. To resolve this, the first of the C Cars were delivered in 1987 by Alsthom, featuring a more traditional flat cab, allowing them to be used both on the ends as well as in the middle of the consist. Additional C Cars were built by Morrison- Knudsen between 1994 and 1996. BART has run these trains for 50 years, with the external appearance largely unchanged since the initial concepts toured around the Bay.
With BART structures paralleling the Santa Fe, Southern Pacific, and Western Pacifics Bay Area lines, these have continually served as a sharp contrast to the often grimy freight service through the area, with sleek aluminum cars flying past freight drags and commuter service on elevated viaducts paralleling the railroad right-of-way
Each Rapido BART Car features:
- Designed from original blueprints, design drawings and field measurements.
- Track-powered flicker-free interior lighting compatible with DC and DCC layouts.
- Directional lighting, including headlights and red tail lights.
- NEM-style close-coupling system, so your cars always remain as close as possible through any trackwork.
- Minimum 18in radius (22in radius preferred).
- Full, multi-color interior detailing.
- Low-profile drive system in A and C cars allowing for a complete interior with no visible motor.
- Full underbody detail including separate electrical lines, conduit and equipment boxes.
- Highly-detailed, non-operating couplers on A and C cars.
- DCC-equipped models feature accurate sound recordings
HO 26Ft Can-Car Dry-Van Trailer - Canada Cartage #8H0394
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
CSX Power In Color: Volume 5 - by Kurt Reisweber
RELEASED: November 1, 2022
AUTHOR: Kurt Reisweber
128 Pages, All Color
Continues the series with a mix of roster and action photos of another segment of the CSX all-time locomotive fleet! Featured are locomotives acquired used by CSX either through acquisition of whole railroads or by purchase of individual locomotives. Units acquired from Conrail and the RF&P are included, as are former Delaware & Hudson, Susquehanna, Monongahela, EMD, and Amtrak power.
HO GE U25B Low Hood - DC Silent - Penn Central #2667
The HO scale U25B Locomotive features:
Phase I, II & III units represented in 1st run. (Phase IV & other units will come with future runs)
Single-window style for low nose units. (Double-window in future runs)
Both low- & high-short hood versions
Early high- & later low-style side doors.
Road specific details for each model
Working step lights on low-short hood models
Different roadname-specific exhaust stacks
Roadname-specific battery box doors on engineers side
Roadname-specific air cleaner boxes on rear
Working inspection lights on all units
Lighted control stand inside cab
Different types of fuel & air tanks, as appropriate
All Scale Tortoise Switch Machine Replacement Parts - Spring Wire (12 pkg)
Product Information
Replacement parts for Circuitron Tortoise Switch Machines make it easy for you to maintain your turnout motors in tip-top shape! Common parts available include Spring Wires, Retaining Screws, Fulcrums, Output Arms with attached contacts and Circuit Boards. See the entire line of Circuitron Tortoise Switch Machines and products.
Athearn HO - 40ft Ribbed 3-bay Ballast Hopper - Union Pacific - #1 - 4pack
901479, 901496, 901503, 90511
Removable load
Separately applied wire grab irons and brake wheel
Solid nickel silver wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
Ultrafine high quality pigment for modelling.
The definitive collection of pigments designed exclusively for modelers. A series of basic necessary and frequently used colors mixable between. AK Interactive pigments are much finer than any of the existing products on the market and contain nearly 3 times the quantity of other leading brands at a lower price .These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve. Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.
Gunderson Multi-Max Auto Rack - CN-GTW
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
Red- (colour of light)
Simply plug into Light Hub, sold separately. 24AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug
SceneMaster - Static Grass Flocking - Dark Green 1/16inch 1.5mm Fibers
Model more realistic grass in minutes in any scale
Great for lawns, farm fields, railroad and highway right-of-way and more
Six realistic colors - made exclusively for Walthers by Noch
Easily applied with Noch Static Grass Applicators, Grass Dispenser Bottle or Gras-Master 2.0 (each sold separately)
3-1/2 Ounce 100g reclosable plastic bags
VIA RAIL (EARLY) (1978 to mid 1990s)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CWSX #140094
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO RTR ACF 4650 3-Bay Hopper - Burlington Northern #446252
Date: BLT 6-75
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO H21A 4-Bay Hopper - Pennsylvania (PRR Black, Plain Keystone) #695513
1961+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Concrete Segmental Bridge Set A, One Complete Bridge - Plastic Kit
Ends & Segments
Expand with Set B #4391
Era: 1970s+
Found across the United States, Modern Concrete Segmental Bridges have replaced literally thousands of aging wooden or early concrete styles of the past.
Featuring generic parts and easy construction, railroads across the country have been using this bridge style for decades due to its low cost, expandability, ease of maintenance, and durability.
Model Description:
Our model faithfully recreates the prototype down to small details like bolt heads! Featuring the same expandability as the prototype, this product is available in two sets:
- Set (A) with (2) two ends and (3) three segments.
- Set (B) with (3) three additional segments.
Dimensions:
- Length (Set A - End to End): 6.85inch (scale 50 feet)
- Width (Trackbed): 1.80inch (scale 13 feet)
- Width (Outside): 2.63inch (scale 19 feet)
- Segment Length: 1.92inch (scale 14 feet)
- Height (floor to bottom): 1.15inch (scale 8.3 feet)
Model Features:
Features:
- Easy to Assemble!
- Injection-Molded Plastic
- Light Gray Concrete Color
- Perfect for 1970+
- Ultra-Common Design
- Extremely Accurate Detail
- Fine-Scale Handrails
HO 73ft 3in Greenville 7,000 Cu.Ft. Wood Chip Hopper - ATSF #165077
One of the lightest loads moved by rail, wood chips require one of the biggest cars and they are easy to add to HO operations with these Walthers Mainline Greenville 7000-cubic Foot Woodchip Hoppers! Back by popular demand, features of these models include:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from early 1970s to the present
- Designed especially for moving woodchips from sawmills to paper mills
- Prototypical interior bracing
- Authentic door latch details
- Detailed brake gear
- Heavy die-cast metal underframe
- 100-ton trucks with correct 36 inch turned metal RP-25 wheels
- Proto MAX(TM) metal knuckle couplers
Weathering Pencils - Light Rust (5/Box)
Weathering pencils are water-based pencils with 17cm semi-grease paint specially for use in modeling. Specially formulated with the most suitable basic colors to achieve all the effects in a very simple way! They are very easy to control, clean, and of course they are not toxic. It is an ideal tool both for people who want to introduce themselves in modeling and for more advanced modelers who can discover their properties in different effects.
We recommend using them on a matt surface to achieve optimal results, but thanks to their semi-fat tip, they can be used on other finishes!
Fine Turf - Soil
25.2 Cubic Inches Per Package
Use Soil Fine Turf to model realistic grass, low ground cover and for highlighting and accenting landscape. It is colorfast and blends naturally with other foliage. Use for any scale.
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar CSX
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Lacquer Thinner - 250mL Bottle
This is a diluted lacquer thinner that is plastic friendly, causing minimal damage to plastic models. Can be used for any of the following:
- Remove paint from paint brushes and other painting tools
- Dilute Liquid Surface Primer allowing it to be used in airbrushes
- Thin out putty such as Tamiya Putty (Basic Type)
- Dilute lacquer-based paints
- Clean paint, oil etc. from various surfaces, including putty and actual model
HO 50Ft FMC 5283 DD Boxcar - Southern Pacific / Speed Letter #245121
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Positionable sliding double doors
Body-mounted McHenry operating scale knuckle couplers
Painted and printed for realistic decoration
Precision machined metal wheels
Highly-detailed, injection molded body
Weighted for optimum performance
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CMBX #1610
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
HO Dash 9-44CW - DCC Ready - UP/Ex-C&NW #9696
MODEL FEATURES:
Non-illuminated ditch lights
Three cab variations
See-through cab windows
Factory applied sunshades, frame-mounted bell, exhaust stack, brake wheel, rear sand filler, air tanks
Separately-applied wire grab irons
Fine scale handrails
Steerable or Hi-ad trucks with separate shock struts and brake cylinders per prototype
5,000 gallon fuel tank
McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run out of the box
Painted and printed for realistic decoration
Highly detailed, injection molded body
Quick Plug and play technology: DCC ready with both 8 and 9 pin connectors
Bi-directional constant lighting so headlight brightness remains consistent
Incandescent bulbs for realistic color and appearance
All-wheel drive with precision gears for smooth and quiet operation
Heavy die-cast frame for greater traction and more pulling power
All-wheel electrical pickup provides reliable current flow
5-pole skew wound motor with precision-machined flywheels and dual-link drive train for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Packaging interior safely holds the model for convenient storage
Minimum radius: 18inch
Recommended radius: 22inch
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21268
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO EMD GP40 - DCC & Sound - Wisconsin Central #3023
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO SP C-40-3 Steel Cupola Caboose - Southern Pacific (Gothic Large - Without Roofwalk) #1136
1970s+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
Juneco Scale Models Headlight - Pyle Early Double w/jewels, plastic (2/pkg)
G2 Dash 9-44CW - DCC Ready - Norfolk Southern #9225
ETA: Late October 2022
Detailed Information
NS NOTES:
Each year from 1995 to 2005, NS placed an order with GE for Dash 9 series locomotives, with a grand total of 1215 units delivered. They are used in all types of mainline service. Some units were equipped with an APU (auxiliary power unit) mounted on the walkway, which operated to provide basic locomotive systems while the prime mover was shut down, potentially saving fuel. The units on offer are from the 1998 order.
ROAD NUMBER SPECIFIC FEATURES:
#9169
Large and small Sinclair antennas
K9 APU on walkway
Electronic parking brake
#9131
PTC antenna arrays
Standard parking brake
#9225
PTC antenna arrays
Standard parking brake
DASH 9 SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
N Budd RDC-1 (Ph 1) - DC/Silent - New York Central (Stripes)
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height
Tangent Scale Models HO PS4750 Covered Hopper - KCS - Delivery Brown
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
KCS -Delivery Brown 12-1979- The KCS scheme is simple and eye-catching, with the tall KCS reporting marks, white circle delineators and brown matching trucks. The center sill correctly models the brake linkage access holes on one side of the car, just like the real ones. This is a big scheme, and we know our KCS customers have been a patient group. Our KCS terra cotta colored masterpieces accurately depict their Pullman-Standard prototypes.
HO Scale GP38 - DCC & Sound - Santa Fe (Yellow Warbonnet w/o Class Lights) #2346
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO GP9 - DCC & Sound - Milwaukee Railroad #282
ETA: May 2023
Detailed Information
MILW FEATURES:
Side number plates
Winterization hatch
Dual horns
Snowplow
Dynamic Brakes
Solid end handrails
No drop step
Winterization hatch with clearance notch for spark arrester (not included)
Milwaukee Road received their last and largest order of 52 GP9s, #s 280-331, in the spring and summer of 1959. This batch of GP9s was initially assigned to priority transcontinental freight service but they were bumped to less glamorous work when higher horsepower units arrived on the system. Number 297 models the Milwaukees -Billboard- paint scheme.
ROAD NUMBER SPECIFIC FEATURES:
#282
As-delivered paint scheme
number plate
dynamic brakes
snowplow and dual horns
#297
-Billboard- paint scheme
number plate
dynamic brakes
snowplow and dual horns
#316
As-delivered paint scheme
number plate
dynamic brakes
snowplow and dual horns
ROAD NUMBER SPECIFIC FEATURES:
#682
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#683
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#688
Dynamic brakes
bell mounted on long hood
#690
Dynamic brakes
bell mounted on long hood
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Scenic Accents Glue - 1.25oz (37mL)
Specially formulated to attach Scenic Accents or any type of figure or detail to a layout or diorama. Figures can be positioned without waiting for glue to dry. And since it stays tacky, they can be placed in one position, picked up and moved to another without regluing at any time. Accent Glue leaves no puddles or residue. Its water-soluble and a small brush applicator is included.
HO Bathtub Coal Gondola - MLMX/ Sims Metal #345
Built: 10-08
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - CIL Monon #9002
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
N Scenic Accents(R) -- People & Pesky Raccoons
Bring your layout to life with N scale Scenic Accents figures and accents that tell your layout story with authentic detail.
A Unit Only, EMD Executive F7 Diesels, ESU Sound and DCC - Amtrak
Product Information
These WalthersMainline F7s are perfect power for those HO fantrips, shippers specials and other special events you have planned! This run brings you classic A-B sets and matching A units in five later schemes, all based on the heritage and executive units rebuilt for public relations duties by several lines from the 1980s on. Features of these layout-ready models include:
-Limited edition - one time run of these roadnumbers!
-Colorful paint and lettering schemes
-Factory-installed handrails
Available with ESU Sound for DCC and DC layouts featuring:
-4 function outputs with brightness control by CV
-Fully DCC compatible
-14, 28, 128 speed steps
-Dual mode DC and DCC
-4 air horns changeable by CVs
-2 bells changeable by CVs
-Full 8-notch prime mover sounds
-Compressor
-Dynamic brake
-Multiple realistic lighting effects
Same powerful drive as WalthersProto(R) locos featuring:
-Five-pole skew-wound motor
-14:1 gear ratio
-Helical-cut gears for quiet, easy multiple unit operation
-All-wheel drive and electrical pickup
-Dual machined brass flywheels
-Heavy die cast metal chassis
-Constant and directional lights
-21-pin plug on Standard DC models for easy DCC conversion
-RP-25 metal wheels
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs, which have known issues with walthers decoders.
N 33,900 Gallon - LPG Tank - GATX #218081
Multiple road numbers, unique numbers between singles and 3-packs
Three different body phases: early, flat panel, and late
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and brake wheel
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
Printed placards, where appropriate
Screw-mounted 100-ton roller bearing trucks
Machined metal wheels with RP25 contours
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Weighted for optimum performance
Operates on all popular brands of track
Minimum radius: 9 3/4 inch - Recommended radius: 11inch
UPGRADED FEATURES:
McHenry double-shelf couplers
Bent wire uncoupling levers
Rubber train line hoses
All-New bluetooth controlled Tsunami2 DCC Sound Decoder - GE Diesel Locomotives
Blunami will change the way you enjoy the model railroading hobby
The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.
Currently the app is only available for Apple iOS devices (versions 8 or newer). The app offers an easy graphic interface to adjust all Blunami settings and features with drop-downs and slider bars. All programming can be done through the app, as well as with your DCC system. You no longer need to understand CVs or own a command station to run your trains!
HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #136013
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO GE C30-7 - DCC Ready - Norfolk & Western (Black Scheme) #8068
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
HO G2.0 SD60M-3 Tri-Clops - DCC & Sound - BNSF #1416
BNSF FEATURES:
Ex-BN, new -wedge- logo paint
Electronic bell
Angled electrical cabinet
Road number specific features
Starting in the mid 2010s, BNSF overhauled a batch of SD60Ms. They were re-wired, rebuilt, repainted, and had remote control equipment installed in most of them. BNSF classifies these as -SD60M-3s-. In this run, we are offering two road units, and one yard service version. 1405 retains it older BN carbody with brake wheel, while 1416 and 8131 has the newer rebuilt body with electronic brake ratchet. All 3 show slightly different versions of the current BNSF scheme.
ROAD NUMBER SPECIFIC FEATURES:
#1405
Small EMD plow
-Skate- style antennas on the cab roof angles
front and rear ditch lights
brake wheel.
#1416
Small EMD plow
strobe light (effect in DCC)
front and rear ditch lights
unique front number board font
remote control decals, new BNSF style electronic brake ratchet.
#8131
No plow
strobe light (effect in DCC)
front ditch lights
-Yard service only- lettering
remote control decals, new BNSF style electronic brake ratchet.
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately ?painted and ?printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Warranty service available
Minimum radius: 18inch Recommended radius 22inch
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
Animated roller bearing caps
SOUND-EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control