HO Scale 30Ft Transformer Bank Kit
This is a life-like, -look like the real deal- little kit that includes everything you see in the picture, including the wires. The pole comes pre-painted and weathered to look like the real deal. Kit includes one pole, two cross arms, three transformer boxes, three drop-down fuses, one control box, two copper wires, and one longer brass wire (that can be painted) that connects the transformers to the control box. This kit works well with any of our other power pole kits and components. The transformers pictured are our medium sized transformers.
A word about our Power Pole Kits: A 30 Ft. HO Scaled pole would be 4.1 inches in height. A 40 Ft. pole would be 5.5 inches. These poles are sharpened on the base and are slightly taller than these dimensions to allow for pole insertion into your scenery.
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) #653287
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Spray Can - Matte White (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO EMD GP40 - DCC Ready - RF&P (Blue and Grey) #122
1982+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO Scale Val-U Fuel and Oils Decals for 55 gallon drums - 8pkg
This set of 8 decals will fit our 55 gallon metal drums sold separately. The decal includes Jason Jensens Val-U Fuel and Oils logo.
HO BBQ & Taco Food Trailers - Kit
Serve up some fun along your HO layout with these colorful Walthers SceneMaster Food Trailer kits! A great addition to any busy lunchtime scene, you will find trailers like these dishing up any kind of food you can image in business and commercial areas, industrial parks, and festival midways. Include parts for two trailers, with printed signs, awnings and interiors in full color, along with stand-up tables and wastebaskets to detail the scene.
HO FM H-24-66 Train Master Phase 2 - Silver DCC Ready - CP Rail #8917
Separately-applied door handles
Real metal springs on trucks
Realistic die-cast underframe
Five-pole skewed armature motor with dual-flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate? couplers
Painted crew figures
Separately-installed fine scale handrails
Etched metal radiator grilles
Electronic Dual-Mode Decoder (e-DMD) (Gold Series only) that allows your locomotive to run in DCC or DC
NMRA 8-pin plug for DCC (Silver Series only)
Railroad specific details (Lighted classification lights on some models
Atlas Master? Series Silver Additional Features:
NMRA 21-pin plug for DCC (Decoder-ready)
Sound Features for Gold Series :
(DCC Operation)
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F31 .
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes ?on the fly? are provided for true realism.
AccuMate? couplers are made under license from AccuRail, Inc.
Silver Sound Ready
Craft Plywood Sheet - 12 x 24inch x 1/2inch Thick - Single Piece
Perfect for painting, staining, stenciling and wood burning
Cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use
1/2inch (1.27cm) Thick x 12 x 24inch (30.4 x 60.9cm)
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov
Manchester Liners/Modern Container Ship - Unpainted and Resin Cast
FEATURES:
- White Polyurethane Resin Kit
- Unique One Piece Castings for Easy Assembly
- Built at Gijon, Spain 1971
- Scrapped at Aliaga, Turkey 2002
- Typical Short Sea Container Ship
- Measures 39-3/8 Inches Long When Complete
- All Deck Fittings Included
- Waterline Model
- Era: Suitable for 1960s to Present
- Full Color Instructions
- Decals Included
HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - DT&I
#85017
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO 50ft Ext-Post Hi-Cube Plug Boxcar - OCE #3481
MODEL FEATURES:
- Separately applied brake wheel and stirrups
- Highly-detailed, injection-molded body
- Metal wheels with RP25 contours operate on all popular brands of track
- Minimum radius: 18 inches
N Scale Curved Turntable Extension Track Set
F30A 50Ft Flat Car: PRR Delivery #474398
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
Digitrax DH126PS 1.5 Amp Economy HO Scale Short Harness 1 inch long, 8 PIN Mobile Decoder
Specifications
Current Rating-Motor1.5/2.0 Amps MaxSize.672†x 1.074†x .259†(17.08mm x 27.28mm x 6.6mm)Installation Digitrax 9 pin to wires Function Outputs 2
Function TypeFX3
Features Series 6
Warranty - No Worries Warranty
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286311
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
SH2AB - HO Scale Mainline Signaling Kit
HO scale Mainline Signaling Kit including:
- 2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws.
- Makes all of your signals plug n play with small 10 pin connectors.
- Can be used as a basic HO scale signal.
- Mounting board and hardware included.
- Current setting resistors are built in to the board.
- Easy mainline setup with A and B mast configurations.
- Pads are provided to make it easy to attach any signal to the mast base.
- This product is intended for use with the SE74.
The Digitrax Plug N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE74 signal driver cable.
This product is intended for use with the SE74 and other Digitrax signaling decoders.
HO 60ft Bulkhead Flatcar - PGE #16099
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
N Scale Long Barrel Ore Hopper - CN Mineral Brown #346558
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.156 (10pcs pkg)
Built-&-Ready Landmark Structures - J. Franks Grocery
Assembled - 5 1/4 x 4 1/8 inches
(13.3 x 10.4 cm)
Modeled after the independently owned grocery stores that began sprouting up in the early 1900s and that can still be seen today in cities and small towns throughout America. Details and accessories include loading dock with dolly, large display windows, awnings, kiddie ride and more. The building features window treatments and you can add lighting to accentuate the included printed interior.
HO EMD GP40 - DCC Ready - SSW/ Cotton Belt #7602
1966+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
CSXT #805
EMD SD80MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Models equipped with marker lights will be illuminated
Rubber MU hoses for durability
All New Tooling
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
See through steps
Illuminated ground lights
Front and Rear Illuminated Numberboards
Presenting EMDs 5,000HP 6-axle diesel in a whole new level of authenticity. Starting in 1995, EMD revived the 20 cylinder engine design, last seen in the SD45, and introduced the 5,000 HP SD80MAC. Athearn is pleased to announce this locomotive in Genesis 2.0.
CSX FEATURES:
Illuminated front and rear red marker lights
Illuminated Ditchlights alternately flash per prototype w/ effect on DCC+Sound version
Four panel dynamic intake per ex CR prototype
CSX specific roof mounted antennas
Repainted roof
Digital walkway mounted fuel gauge
LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE:
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 50ft 6in Boxcar - Canadian National #419348
Features:
- Prototypical non-terminating corrugated ends
- Diagonal paneled roof
- Single 10-foot YSD design sliding door (non-operating)
- Detailed cross-member attachment rivets on the side sills
- Weighted, detailed underframes
- True scale dimensions with accurate details
- Equipped with AccuMate knuckle couplers
HO Figures - Sidewalk People (7)
Populate your layout with miniature figures from all walks of life!
Drill Bit #78 - 0.016inch Diameter (2 pkg)
Product Information
Walthers Drill Bits are the right tools for all kinds of hobby projects, from detailing locomotives and cars, to scratchbuilding, wiring and more. Theres a full range of common wire gauge - jewelers drill bit sizes from number 80 to 43, and each pack includes two ready-to-use bits. Walthers miniature hardware is a complete range of ready-to-use parts and tools for hobby projects, including wood, machine and nylon insulating screws, plus appropriate hex nuts and washers, in assorted standard sizes (machine and wood screws may be brass or brass plated). Drill Bits are part of the line of Walthers miniature hardware and tools.
Trinity 3230 Covered Hopper - CIT Group/Capital Finance #95966
FEATURES:
All new tooling
Ready to run
Injection molded plastic
Fine scale detail
Separately applied wire grab irons
Separately applied wire cut levers
Etched metal roofwalks
Crisp painting and printing
HO 73Ft Center Partition Car - Norfolk Southern #120391
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
HO Chemical Tankcar - Staley #4917
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Wireform safety handrails
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 15inch
Checker Players
8 pcs Checker Players
N Scale Track-Bed Super Sheet
Super Sheets are the perfect underlayment for multi-track yards, switches, loading areas, and sidings. They align well with cork or Homasote. Track-Bed deadens sound, requires no pre-soaking like cork, remains flexible, and will not dry out or become brittle.
Install easily with Foam Tack Glue (#1444). Pin in place with Foam Nails (#1432).
1 sheet/pkg - (3 mm x 30.4 cm x 60.9 cm)
Fine Grit Tapes (6pk)
Use for item #123 and #700.
HO Vintage Gas Station Signs - Conoco (38)
Contains 38 full color signs from the 1930s-1950s. HO Scale. Unique weathering and application instructions included in all poster/sign packs.
Plastruct 90045 ABS Channel 1/4 (4pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/4
HEIGHT IN MM
6.4mm
WIDTH IN INCHES
5/64
WIDTH IN MM
2.0mm
THICKNESS IN INCHES
.050
THICKNESSS IN MM
1.3mm
LENGTH IN INCHES
24
LENGTH IN MM
600mm
USE DESCRIPTION
TRADITIONAL ABS CHANNELS Use for bracing or lightweight vertical support members in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor
HO Scale NSC 73Ft Centerbeam Flatcar - Trailer Train (TTZX) #861241
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
Tsunami 2 TSU-pnem Digital Sound Decoder for Baldwin & Other Diesels Sounds
Prime Movers - Rio Grande Southern Galloping Goose, Dual Whitcomb, Fairbanks-Morse, GE GTEL UP Slab Side, GE GTEL UP Veranda, GE GTEL UP Big Blow - A unit, GE GTEL UP Big Blow - B unit, Cummins QSK19C x3 GenSet
9 Pin board
The TSU-PNEM is a 9 Pin sound decoder suitable for use in many manufacturers models such as those made by Atlas Athearn and InterMountain Models. It is suitable for a wide variety of models from HO to S scale.
9 EMD Prime Movers
Dimensions: 30.5 x 15.5 x 6.5mm
Max. Motor Stall Current: 2A
Function Outputs: 6
Max. Function Current: 100mA (each output)
Audio Amplifier: 2 Watts, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
16-bit Digital Sound
1A Motor Stall Current
Over 50 Sound Effects with Selectable Reverb
Functioning Engine, Train and Dynamic Brakes
Reactive Dynamic Digital Exhaust
6 Function Outputs with over 20 Hyperlight Effects
Hyperdrive2 Advanced Motor Control
DCC Track Voltage 7.5V – 22V
No speaker included
HO 34Ft Ribbed Hopper - NYC (4 pkg) #2
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Removable coal load in each car
Machined metal wheels
Mchenry scale knuckle spring couplers installed
A total of 9 different road numbers available for each road name
Minimum radius: 15inch
Magic Brushes & Applicator Handle - Assorted (11 pcs)
Contents: 10 Assorted Magic Brushes & Applicator Handle
HO EMD GP40 - DCC Ready - SSW/ Cotton Belt #7600
1966+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
EMD E8A (DC/DCC/Sound) Amtrak - Phase 1 #291
Rapidos E8 model features:
3D laser-scanned body shell
Accurate nose and roof contours
Seven different noses
Three different back ends
Two different sides – with and without lifting lug covers
Three different steam generator options
36inch fan, 48inch fan or non-dynamic brake options
Single- or dual-headlight configurations
Freight or passenger pilots
Three styles of side grills
Original porthole sides or rebuilt with blanked sides (including unique variations)
Skirted or non-skirted fuel tanks
Original square and sloped or Hyatt roller bearing journal boxes
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Complete lighting effects – headlights, class lights, backup lights, ground lights, cab lights and more
Numerous road-specific detail parts in both plastic and etched metal
Details Include:
Blanked portholes
No dynamic brakes
Single MU door nose, left of headlight
Passenger pilot
PRR rear
PRR nose lifting lugs
Nose-side grab ladder
Hyatt bearing trucks
Dual steam generator, closely spaced
Horizontal grill
No skirts
Pilot MU hoses
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140007
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Bi-Level Auto Rack - Transportación Ferroviaria Mexicana (TFM)/TTGX Flat Car #987753
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO 60ft NSC 5150 3-Bay Covered Hopper - Cargill (ICMX) #1083
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
N Scale Single Track Truss Bridge 9-3/4in (248mm) - Silver
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly.
The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
Acrylic - Light Primer - 2oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 85ft ACF Dome Diner Coach - Union Pacific (Missouri River Eagle) #7011
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
UPP 7011 Missouri River Eagle was built as UP Dome Coach 7011 in November 1958 and is named for the Missouri Pacific train serving St. Louis and Omaha from 1940 to 1971, MPs first and last diesel-powered streamliner.
HO Wrapped Lumber Load for 72ft Centerbeam Flatcar - Bennett Lumber
(Blue, red)
Put your railroad to work moving these Walthers SceneMaster Wrapped Lumber Loads from sawmills to local building suppliers. Made especially for the HO Walthers Mainline 72ft Centerbeam Flatcars (#910-4800 series, each sold separately) and adaptable to most cars with a similar interior length, each is pre-painted and lettered in authentic schemes, and snaps easily onto the car to add realistic detail in a matter of minutes!
N Scale Scenic Accent Figures - Farm Horses (6/pkg)
HO RTR Trinity 25K Gallon Tank Car - Archer Daniels Midland ADMX #25411
(black, white- Molecule Logo)
Product Information
A versatile car for contemporary HO layouts, the WalthersMainline 25,000-Gallon Tank Car can serve a wide range of industries. Based on widely used prototypes that entered service in the mid-2000s and are still in service today, features of the model include:
One time run of these road numbers, order now - limited quantity available!
In service from mid-2000s to the present
Prototypes handle fuel oil, crude oil, vegetable oil and more
Separately applied manway, protective top filling housing with hatch, pressure relief valve
Underbody features separately applied wire safety rails, skid protected bottom outlet valve, steam inlet and outlet, brake equipment w/cylinder and rods, and train line
Finely molded factory-installed railings, ladders, walkways, placards & stirrups
100-ton trucks
Correct 36inch turned metal RP-25 wheelsets
Proto MAX(TM) metal knuckle couplers
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SSTX #2022
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO SD60M Tri-Clops - DCC Ready - Canadian Pacific #6262
Detailed Information
CP FEATURES:
Full CP repaints (ex-SOO)
Front and rear illuminated number boards
Front and rear ditch lights
Winterization hatch
Fresh repainted appearance
By the 2000s, the 5 SOO SD60Ms slowly started to receive full CP repaints. They retained their rear number boards, but also gained rear ditch lights. Being a rarity, they have become a CP railfan favorite to catch and photograph.
ROAD NUMBER SPECIFIC FEATURES:
#6259
Ex-SOO #6059
large front plow
firecracker antenna
high nose door window
#6262
Ex-SOO #6062
large front plow
firecracker antenna
low nose door window
roof beacon (effect in DCC)
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
EMD HTC trucks with animated bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Accurately painted and printed paint schemes
Packaging securely holds for the model for safe storage
Minimum radius: 18inch Recommended radius 22inch
HO GE Dash 9-40CW - DCC & Sound - Norfolk Southern NS #9806
NS FEATURES:
Front and rear ditch lights (Alternately flash in DCC mode)
High-mounted head light and number boards
K5 horn
Electronic brakes
Graham White Electronic bell
Delivered new in 2003 from GE, NS took delivery of class 9745-9811 Dash 9-40CW locomotives. Some unique features include: electronic bell, high mounted headlight, and electronic parking brake. We are offering both versions of the front cab schemes to choose from!
ROAD NUMBER SPECIFIC FEATURES:
#9754 -White face- scheme
#9773 -Unibrow- scheme
#9806 -Unibrow- scheme
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Modern 150ft Highway Overpass w/Piers - Kit
The Rix Modern Highway Overpass for HO scales is modeled after the bridges built today to span over railroad tracks. This style of bridge is typical of most new construction and is used all over the country. The Rix Modern Highway Overpass consist of 50 foot (6-7/8 inches) spans 25 scale feet ( 3-7/16 inches) wide. which interlock together so that any length bridge can be built. The piers are designed to be adjustable so that raising (up to 5-1/2 inches tall) or lowering the bridge for different heights is quick and easy.
HO ALCo RS-3 - DCC/Sound - CN (Green) #3023
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
Tru Color Paint - Acrylic - Vermont Railway Green - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 85Ft ACF Baggage Car - Union Pacific Heritage Fleet (1st) #5779 Promontory
Product Information
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
Perfect for fan trip and excursion service
UP excursion schemes
Factory-printed car names, numbers and full-color graphics as appropriate
Factory-installed grab irons
Prototypically accurate window tinting
Correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24inch radius is recommended for operation.
Built by St. Louis Car in 1962 for mail storage service as #5752, the car was reassigned to the maintenance fleet as a tool car in 1970 and renumbered 904277. Retired in 1997, the car was held for parts until 2018, when it was refurbished for the 150th anniversary of the driving of the golden spike, named -Promontory- (the second car to carry the name), restored to its original #5752 and finished with special -Experience the Union Pacific- lettering in blue.
Acrylic Flat Colors - Cockpit Green - 3/4oz (23mL) Bottle
XF-71
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO Scale GP38 - DCC & Sound - Santa Fe (Yellow Warbonnet w/o Class Lights) #2329
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
Gunderson Multi-Max Auto Rack - Norfolk Southern
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
EMD Electrical Air Filter Box
HO RTR 68Ft Railgon Gondola - Railgon GNTX #290058
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
Spray Can - Pure Orange (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - Santa Fe (ATSF) #350050
Product Information
Serve a wide range of HO industries with the 37ft 2980 Cubic-Foot Two-Bay Covered Hoppers from WalthersMainline. Based on prototypes introduced in the late 1980s, they can be found hauling cement, fracking sand, roofing granules and similar loads. Features of the layout-ready models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from late 1980s to the present
Separately molded and applied hopper gates
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
HO 39ft Trinity 3281 2-Bay Covered Hopper - VTG North America/VTGX #350188
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- In service from late 1990s to the present
- Built especially for heavier materials including fracking sand, cement, bentonite and more
- Separately applied brake gear, running board, discharge gates, inlet hatches and end ladder cages
- Correct 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Scale G2 SD90MAC Diesel - DCC & Sound - CIT Group (CEFX) #133
Detailed Information
CEFX FEATURES:
Front and rear ditch lights mounted above the walkway
Different air horn types per prototype road number
Bluebird paint scheme
Originally built in 1999, this order consisted of 40 units in total. They were originally painted in a maroon-and-grey scheme and could be found in lease service as far as British Columbia and Oregon. Recently, several units were acquired by or leased to other railroads, while the -Bluebird- paint scheme was applied to #s 105, 119, 130, 133, and 136.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Extended Vision Caboose - Chesapeake & Ohio #3206
MASTER MODEL FEATURES:
Thin endrails
Roofwalk where appropriate
Accurate painting and lettering
Roller-bearing caboose trucks
Window glazing
Metal knuckle couplers
Separate brake cylinder
Open smoke stack
Triple valve and air reservoir
HO Red Wing Milling Co. - Kit
Product Information
Flour mills have changed dramatically since the water-powered mills of the 1800s. The Walthers Cornerstone Red Wing Milling Co. captures the look and feel of contemporary mills in a size that fits most layouts. 1950s and later mills produce enormous quantities of flour and other milled grains. They once received grain in boxcars and have since moved to covered hoppers. Outbound flour and meal moves out in Airslide(R) and similar covered hoppers as well as in bulk hopper trucks. The modern concrete Red Wing Milling Co. features truck and rail loading facilities, blowers, vents, separate doors and windows, and full-color decal signs.
As shown the finished kit measures: 8 x 11 x 10-3/8inch (20 x 27.5 x 26.5cm.)
Red Wing Milling Co. is just one of a wide variety of Cornerstone industrial buildings.
Contemporary trackside industry
Prototypes receive grain in covered hoppers or boxcars, ship flour in Airslide hoppers, boxcars and by truck
Exterior dust collectors, fire escape ladders and other details
Railcar loading canopy
Truck loading doors
Easy-to-build plastic kit
Realistic decal signs
HO 50ft 6in Boxcar - N-de-M #101330
Features:
- Prototypical non-terminating corrugated ends
- Diagonal paneled roof
- Single 10-foot YSD design sliding door (non-operating)
- Detailed cross-member attachment rivets on the side sills
- Weighted, detailed underframes
- True scale dimensions with accurate details
- Equipped with AccuMate knuckle couplers
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200020
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
N Scale 1960s-1970s Hillman Imp - Assembled -- Willow Green
HO B-50-15 Boxcar - As Built w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #15691
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
HO AutoScenes - Suds & Shine
The youngsters are not missing a spot while washing and shining this coupe for a spin down the street.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
Acrylic Flat Colors - Neutral Gray - 3/4oz (23mL) Bottle
XF-53
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
Rough-Edged Paint Out Blanks
Decal set with a variety of shapes and sizes of blank paint patches in 5 colors - light gray, oxide red, mineral red, boxcar red, and black.
HO Gunderson 6276 50Ft Plate F Boxcar - TTX (2016) #506553
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
HO 85ft General American G85 Flatcar - Union Pacific #53025
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
HO 60ft Flat Car - British Columbia Railway #1555
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO Hawker-Siddeley Van - Caboose - Canadian National -Late - (Black Steps) - #79258
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
Flat Brushable Acrylic - Brown - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
HO SW1000 Switcher - DCC & Sound - VIA #202
ETA: June 2023
Detailed Information
VIA FEATURES:
Sinclair Antenna
Roller bearing trucks
600 gallon fuel tank
Officially licensed product of Via Rail Canada
In 1987 VIA purchased 3 SW1000s second hand from Inland Steel in Indiana for use in their yards in their Montreal Maintenance Centre.
SW1000 LOCOMOTIVE NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SW1000 LOCOMOTIVE STANDARD FEATURES:
Lit ground lights
Detailed cab interior
Drop steps unless noted
MU stands
Exhaust stack
Printed numberboards
Fine scale handrails
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Cube Speaker for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Excellent low-speed operation
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
72Ft Centerbeam Flatcar with Standard Beam - Ready to Run - Southern #601110
Product Information
Shipping lumber by train is easy for your HO railroad with a fleet of WaltherMainline 72Ft Centerbeam Flatcars on the job! Designed to speed loading and unloading, these bigger cars entered service in the 1980s and quickly became a favorite with shippers and customers. These nicely detailed models are based on earlier cars built with oval cut-outs (popularly known as -opera windows-) on the centerbeam to reduce overall weight, which are still in service with a wide range of railroads and lumber producers. Other features include:
Limited edition - one time run of these roadnumbers!
Heavy die-cast metal underframe for excellent tracking
Correct 36In turned metal wheelsets
Proto MA metal knuckle couplers
HO Procor 3000CuFt Aluminum Hopper w/Handrails - UNPX/ Procor Wordmark #127246
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
Dimension: 5-1/2 X 11 inches and stands 3-3/8 inches tall.
The Atkinson Engine Facility is modeled after an existing engine facility build in the early 1970s. The Structure is designed to allow the engines to be serviced under roof and provide office and storage space for the service attendants.
This kit is designed with cut lines on the back side of the walls so that door and window locations are optional. Kit includes doors, windows, roof vents and down spouts.e
These Kitbasher Series kits are built up from individual components from several our existing Pikestuff kits. We have done the kit bashing for you by providing you with of the parts and instructions to build a unique building from the Pikstuff inventory. These kits require some cutting of the soft plastic. Some cut lines are not provided, but cutting is easy and the instructions will guide you through each step along the way.
HO AutoFlood III RD Coal Hopper - GLFX #8076
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO Gunderson 6276 50Ft Plate F Boxcar - UCRY #15839
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
All Scale Realistic Trees Kits - Green Deciduous Medium Green - 3/4 - 3inch Tall pkg(21)
Six selections of tree kits in deciduous or conifer styles ranging in size from 3/4inch to 8inch give you the opportunity to make easy and truly unique trees for your layout. Create the armature shape you want then add as much or as little foliage as desired. Easy for beginners.
HO 1937 AAR 40Ft Boxcar - CP5/5 Ends - Undecorated Car
Includes all appropriate optional parts
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
ZAP Formula 560 - Canopy Glue (2 fl.oz.)
- Clear, fast drying
- Bonds canopies & plastic parts to almost anything!
- Remains flexible
Pad Set: Angled Cut Sanding Sticks (5 different grits)
Flex-Pads put a New Angle on modeling with improved versatility and convenience! Made of flexible polyester abrasives and containing inner padded support the Flex-Pad provides evenly distributed pressure over irregular surfaces without digging in or scratching. Triple-Grit Polisher/Finisher cleans and polishes in 3 easy steps. All products contained within this kit work well on plastic, wood, metal, and painted surfaces.
- Ideal for sanding and blending materials of dissimilar texture and hardness
- Double Sided
- May be used wet or dry
- Reach into tight corners
- Clean Up Narrow Recesses
- Smooth delicate joints & small fillets
Contents: 5 Flex-Pads (one of each grit we offer)
HO USRA Single-Sheathed Boxcar: Reading
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Evans X72 Box car: Penn Central w/ Small Logo - Single Car #269268
Detail Variations:
As operated between 1973 to 1976.
6-pack includes the following numbers:
#266577
#266850
#269268
#269320
# 269827
#269899
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
HO EMD SD9 - ESU LokSound 5 Sound & DCC - Southern Pacific #3900 - 1965 Renumbering (gray, scarlet, white)
Power up your HO freight operations with Walthers Proto SD9 diesels!
The debut of the SD9 in 1954 marked the next step forward for EMD's Special Duty line of six-axle diesels, and introduced the new 567C prime mover delivering 1,750 horsepower. Ideal for demanding assignments in helper, yard, transfer and heavy freight service, with its weight spread over six axles, the SD9 was also well suited to branch line duties. By the time production ended in 1959, 515 SD9s were in service on over a dozen railroads and some are still going strong!
From superb paint and lettering to railroad-specific details, and available with ESU LokSound Select for DCC and DC layouts, WalthersProto SD9 locos come ready for service and feature:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1954 to the present - several preserved today
Used in helper, yard, transfer, heavy freight and branch line service
Available with ESU LokSound 5 sound and DCC for DCC or DC layouts
Road- and era-specific details
Formed wire grab irons
Etched-metal lift rings
21-pin DCC plug
Correct size RP-25 metal wheels
All-wheel drive and electrical pick up
5 pole, skew-wound, high-torque, high-efficiency can motor
Helical gears with 14:1 ratio for smooth, quiet running
Easy multiple-unit operation
Superb paint and lettering
Warm white LED constant and directional headlights
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
Road-specific features of this WalthersProto replica include:
Brass Nathan P3 air horn
Whip-style radio antenna w/mast and SP-style conduit
SP 5-light package w/Mars dual sealed-beam headlights, Gyralight & UDE emergency light for DCC; operating headlights & front Gyralight on DC units
Cab-mount wind deflectors
Photo-etched cab sunshades
Rolled-style handrail stanchions
Drop steps
SP-style pilot plows front and rear
Dynamic brakes
Roof-mounted air cooling piping
MU hoses
JGSDF Dark Green Lacquer Finish Paint
Accurately captures the shade of green seen on Japan Ground Self Defense Force (JGSDF) vehicles
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO H-6-G - DC/Silent - Canadian National Railway (Straight Wafer) #1401
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO 55Ft Evans 4780 Covered Hopper - ADM (UELX) #30248
(Yellow molecule logo)
Product Information
Expand grain traffic along your HO railroad with a fleet of WalthersProto 55ft Evans 4780 Covered Hoppers! Introduced in 1977 and still going strong today, they can be found handling all types of grains and dried distillers grains used for animal feed. Fully assembled and ready for service, features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint and lettering
Ultra-smooth rolling 36inch RP-25 turned wheelsets
Proto MAX(TM) metal knuckle couplers
HO Wood Grade Crossing (2/pkg)
Realistic looking and ready to place.
Easy to install!
Injection molded plastic wood planks are notched to fit over rail spikes.
Includes pre-cut shims to correspond to proper code.
Works with any track code.
NYC As Delivered (941H) - In Service 1964 #885804
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
Plate ACI Placards -8pkg
In 1967 the rail industry introduced a nationwide system to track freight cars as they moved across the railroad network. The visual result of this technology was the application of ACI labels to the side of freight cars. These labels – or placards – were required on all freight cars from 1968 to -1979, although the labels lasted far longer than that and can still be seen today. These finely-executed placards allow you to reproduce this detail on your freight car fleet, and include correct dimensions.
HO 60ft PS Auto Box - Southern Pacific/SP #621105
MODEL FEATURES:
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Fully detailed full cushion underframe
- Full underframe detail: air brake reservoir, control valve,
- Separately applied door closure rods, side ladders, metal grab irons and brake cylinder with plumbing and brake rod details
- etched metal end platforms
- 100-Ton roller bearing trucks with operating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Machined metal wheels
- Weighted for trouble free operation
- Multiple road numbers
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
During the 1960s, Ford Motor Company, Pullman Standard and Santa Fe pooled their resources to develop a standard boxcar to meet the transportation needs of automobile manufacturers in the United States. Delivered in 1965, the Pullman Standard auto parts boxcar is the most prolific example of this type of freight car. It ultimately changed the face of automobile manufacturing and rail transportation.
PRIMED FOR GRIME MODELS FEATURE:
- Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Some Prime for Grime models feature paint scheme variations.
Soundtraxx - TSU8F -PNP ALCO, 8Function Tsunami 2 Sound Decoder - Plug and Play Form Factor
The TSU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturers diesel models such as those made by Atlas, Athearn, Bowser, Kato and InterMountain Models. It is suitable for a wide variety of models from HO to S scale. The TSU2-PNP8 includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. There are two additional function outputs added to the existing TSU2-PNP design using the same lighting circuit and processor pins added for FX7 and FX8. Lighting outputs are compatible with 12-14V bulbs, 1.5V bulbs or LEDs with external resistors.
Features:
Tsunami2 diesel sound decoders are full of new features including over 50 sound effects including engine startup and shutdown, engine prime mover through all eight notches, Straight-to-8, HEP mode, 13 bells, over 40 airhorns, 4 air compressors, dynamic brakes, radiator fans, brake squeal, and more!
Each diesel version (EMD, GE, etc.) contains up to 9 manufacturer specific prime movers (Turbo, Non-turbo, etc.)
First ever Diesel Dynamic Digital Exhaust (DDE) for a more authentic operating experience
Startup, shutdown and exhaust through 8 notches
Automatic or manual notching
Functioning dynamic brake with variable load sound and adjustable braking rate
Over 40 air horns
Selectable compressors, bells, and couplers
First ever Fireman Ed is ready to work on the locomotive, with general service, cab sounds and more!
Clickety-clack, fueling, and authentic cab chatter add realism
Prototypically correct HEP modes and steam heat for authentic passenger train operations
Tsunami2 Overview:
The Tsunami2 is an all-new premium flagship decoder from SoundTraxx, packed with many new features and sound effects to help enhance the realism and fun with both sound and operation. Tsunami2 leads the industry in processing power with a 32-bit processor that provides the necessary horsepower to support 28 functions, 16 polyphonic sound channels, tons of sound and lighting effects, and advanced motor control.
Tsunami2 Digital Sound Decoders integrate a full-featured sound system, Hyperlight lighting effects, Hyperdrive2 advanced motor control, and a DCC decoder into a single package. Tsunami2 Digital Sound Decoders offer over 50 individual sounds, and over 20 lighting effects in each model!
We have added a host of new recordings including: whistles, horns, bells, compressors – and remastered favorites from years past. These new recordings provide nearly limitless choices for your customer! Multiple prototypes in every model means no time spent on a computer downloading files or purchasing special programs. In addition, more powerful audio output, two volume mixers, and our ever-popular Equalizer make the digitized recordings of real engines loud, clear and ultra-flexible.
HO Master Series - GE B23-7 - DCC/Sound - Finger Lakes Railway #2310
FEATURES:
The Atlas B23-7 locomotive model includes such optional/road name specific details as:
- Pilots with and without anti-climber
- Cab headlights or low-nose headlights
- Cab with 4 or 2 side windows
- Phase 1 or 2 sill/chassis used where appropriate
- Bell mounted under the sill or on the long hood
- FB-2, AAR type B, or Blomberg truck side-frames used where appropriate per road name
ADDITIONAL FEATURES:
- Separately-applied scale detail parts include: windshield wipers, metal grab irons, coupler cut levers,
multiple-unit hoses, snow plow, train line hoses, fine scale handrails, and more!
- See through step detail on sill
- Etched metal radiator grilles
- Painted crew members
- Factory-equipped with AccuMate knuckle couplers
- Coupler pocket designed to accept AccuMate Proto-couplers
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Directional lighting
Decoder Buddy Mini 2.2K Axial
The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications. There has also been interest in HOn3 and S-Gauge applications.
Walthers SceneMaster HO 11652 International(R) 7600 Flatbed Truck
HO RTR 68Ft Railgon Gondola - CSXT #491046
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
Lichen Light Green
Small Bag - 86.6 in³ (1.41 dm³)
Natural lichen blends in a variety of colors and textures when combined with other Woodland Scenics landscape products, such as Turf and Foliage.
1952 Ford/Cab Over Engine/Stake Truck - Unpainted and Resin Cast Kit
Spray Can - Pearl White (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
N Scenic Accent Figures - Track Workers (6/pkg)
N Scale Suspended Flashing Lights - Just Plug Lighting - pkg(2)
Product Information
Woodland Scenics N Scale Just Plug Traffic Lights are ready to place right out of the package and come hand-painted and authentically weathered. The Traffic Lights are pre-wired and made for use with the Just Plug Lighting System. Whether at rural intersections or on busy city streets, they add action to any scene. Check out the entire N Scale Just Plug line of lighting and accessories.
Suspended Flashing Lights are perfect for rural areas where a flashing yellow warning signal is needed to caution traffic. Suspended Flashing Lights flash on all four sides and the package includes two flashing yellow signals with poles, enough for two intersections.
Static Grass Flock 57.7 in(3) - Light Green
Use Light Green to create a spring grass effect.
Static Grass Flock is a fiber product that models grass and/or weeds. It is available in six colors and can be used alone, or with Fine Turf. Place under trees, along ditches or as forest litter. Attach with Scenic Cement. Fiber length 1 - 3mm.
HO Evans 53Ft Double Plug-Door Boxcar - Ralston Purina (As Delivered) #142
Features:
70-ton roller-bearing trucks
Blackened metal wheels
Two-piece underframe
Separate brake cylinder
Air reservoir
End platforms
AccuMate couplers
AccuMate couplers are made under license from AccuRail, Inc.
DCC Auto Reverse Module - Suitable for 1 to 10amp DCC Systems
AR10
Features of the AR10 Automatic Reverse Loop Controller
61692; Automatically controls polarity of DCC reverse loops
61692; Provides short circuit protection for loop
61692; Ready to run without any programming
61692; Trip current adjustable 1 to 10 Amps
61692; Easy hookup using screw terminals, no soldering
61692; Solid state design provides silent, reliable operation
61692; Status indication LED
61692; Additional output for remote LED
61692; Automatic or manual reset after short circuit shutdown
61692; Adjustable short circuit response time
1890 Cop and Telegrapher - 2 Unpainted Figures
Stephen M. Timko
Our final look at the C&Os motive power fleet. From the four Alco C-630s to the 25 oddball GP15Ts, C&O owned 16 different second-gen models. Adding to the interest of this roster was a group of 30 GE U23Bs that rode on EMD Blomberg trucks. Other U-Boat models included the U25B, U30B, and later B30-7s. EMD products include GP30, GP35, GP38, GP40, GP39, GP40-2, as well as SD35, SD40, & SD50s.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OFOX #1860
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO EMD SD60M - Standard DC - Canadian Pacific #6261
FEATURES:
- Limited edition - one time run of these roadnumbers!
- Prototypes in service 1989 to the present in main line & regional service
- First SD60M safety cab with three-piece windshield
- Open grating on steps
- 21-pin DCC plug
- Same powerful drive as WalthersProto(R) locos featuring:
5-pole skew-wound motor
14:1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant & directional LED headlights
- Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately
- RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
EMD E8A (DC/Silent) VIA Rail Canada #1800
Rapidos E8 model features:
3D laser-scanned body shell
Accurate nose and roof contours
Seven different noses
Three different back ends
Two different sides – with and without lifting lug covers
Three different steam generator options
36inch fan, 48inch fan or non-dynamic brake options
Single- or dual-headlight configurations
Freight or passenger pilots
Three styles of side grills
Original porthole sides or rebuilt with blanked sides (including unique variations)
Skirted or non-skirted fuel tanks
Original square and sloped or Hyatt roller bearing journal boxes
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Complete lighting effects – headlights, class lights, backup lights, ground lights, cab lights and more
Numerous road-specific detail parts in both plastic and etched metal
Details Include:
Side portholes
No dynamic brakes
Single MU door nose, right of headlight
Freight pilot
Standard rear
Nose-side grab ladder, Canadian style
Early-style square bearing trucks
Dual steam generator, closely spaced
Horizontal grill
Side skirts
Operating ditch lights
#1800 has modified porthole spacing
HO Gold S-4 - DCC & Sound - Grand Trunk Western #8204
Features Include:
Newly tooled with improved cab design
5-pole skewed armature motor for reliable operation
Dual-flywheels for maximum performance at all speeds
Factory-equipped with AccuMate knuckle couplers
Exceptional painting and printing
Sturdy die-cast mainframe and gear cases
Atlas Master Series Gold Features:
ESU LokSound decoder, supporting all DCC programming modes.
Flexible mapping of function keys F0 to F31.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor and more.
HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) #743816
1935+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Tru Color Paint - Acrylic - Matte Aged Tar - 1oz
(For roads and roofs)
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
Tangent Scale Models Delivery 1969 - Gunderson 6089 50ft BoxCar D&RGW
Denver & Rio Grande (D&RGW) Delivery 1969 is an exciting release for us. The distinctive D&RGW Grande Gold orange paint coupled with black ends and carefully added roof overspray makes a model that is simply stunning. The prototype Rio Grande graphics were carefully fitted to the available 7 panels of space to the right of the doors. The white paint at the tops of the ends reminds you that this is a high-cube car. The Rio Grande cars feature truck mounted brake details, faithfully replicated with accurate truck-mounted brake beam details and no body-mounted brake cylinder on the Hydra-Cushion underframe. The Tangent D&RGW model also features accurate unpainted Morton style crossover platforms, early 5-board large tack boards on the sides and ends and an Ajax handbrake. Don?t forget to check out those accurate Hyatt rotating roller bearing caps on the 70-ton Birdsboro foundry Barber S-2 trucks!
Product: Gunderson 6089 50ft High Cube Boxcar
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Birdsboro foundry Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 33in Wheels
HO PS-2-4427 High Side Covered Hopper - CPAA Delivery 1-1970 #388314
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36in 8243; Wheels
Canadian Pacific CPAA NA Delivery 1-1970 shows as-delivered gray cars leased from North American Car Corporation to Canadian Pacific. These cars feature the distinctive NAHX Roman-style data lettering that also carries over to the CPAA reporting marks and numbers. The North American Car black/white/red badge down along the sill provides a tiny bit of color to this gray lease scheme. The models come equipped with Youngstown EZ-Roll gravity gates and Apex-style end crossover platforms. With a 1970 build date, these Pullman-Standard lot cars leased to NAHX include center sill supports between the bays and open-style end running board supports. The finely printed capacity data and internal liner data varies between each car number. And yes, dont worry, these NAHX cars have their accurate serial number stencils along the centersill of the car on each side. Black 100-ton Barber S-2 trucks with accurate (and rotating!) Timken caps finish the model.
Z Scale 33inch Diameter Wheel Sets - 12 axles
DESCRIPTION
Z Scale 33inch diameter plastic wheel sets.
HO 36ft Old-Time Wood Boxcar - Missouri, Kansas, & Texas #75598
N Scale Laser-Cut 2-Lane Curved Wood Grade Crossing - 14-16in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights.
N Scale Dash 8-40CM - DCC Ready - Canadian National: Large Noodle #2415
Our N Scale Dash 8-40CM model features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
Heavy, die-cast chassis with a powerful motor and dual flywheels
Operational headlights and rear lights with operational factory-installed ditch lights (plus rock lights on BCOL locomotives)
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
Factory-installed couplers mounted at the correct height
HO MLW M420 - DCC & Sound - Oil Creek & Titusville Railroad #3568
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO The Atomic Cafe - Hydrocal Casting Kit
You can not get a more classic looking Downtown Deco kit than this one! This 25th Anniversary kit features all new master patterns, full color signs, rooftop details, a bit of deteriorated concrete sidewalk, and complete assembly & painting instructions.
DIMENSIONS:
4 x 6-1/2 inches.
N Scale Thrall 52Ft 6inch Gondola Car - Rio Grande (Black) #56453
Model features
Properly weighted for superior tracking.
100T trucks with Fox Valley metal wheels.
Body mounted magnetic knuckle couplers
Detailed plastic body with or without jack pads.
3 different trough hatch styles.
Etched metal grab irons, and roof walk.
Evergreen Scale Models 4150 .150in Opaque White Polystyrene Novelty Siding (1sheet)
The perfect color to give contrast to details and panels on tanks painted with Panzer Grey or any grey tone. Just mix well and use a brush to apply to details, rivets, hatches, etc. and remove excess with a clean brush moist in Enamel Thinner.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SECX #2320
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO RTR 40Ft Single-Door Steel Boxcar - New Haven #36172
(vermillion, black, white)
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. Check out the entire line of Bowser HO Scale ready-to-run boxcars.
HO F89-F Bi-Level Auto Rack - Illinois Central/BTTX #930363
Detailed Information
MODEL FEATURES:
Die-cast underframe
Authentic undulating safety railing
Accurate Whitehead and Kales Auto Rack
Early or late train lines and cut levers per prototype and era
Customer installed end bridge plates (included in box where applicable)
Detailed deck
Wire-formed brake plumbing
Separately applied hand brake per prototype
Separately applied wire grab irons where applicable
Prototypical ride height
70-Ton roller bearing trucks with animated rotating bearing caps installed
Trucks with animated rotating bearing caps
Minimum radius: 22inch - Recommended radius: 24+inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
HO 40Ft Drop Sill Parcel Trailer - UPS/ Red #87612
Detailed Information
MODEL FEATURES:
Painted wheels
Rubber tires
Fully-assembled and ready to use out of the box
Painted and printed for realistic decoration
Officially Licensed UPS Product
HO EMD GP40 - DCC Ready - Canadian National (Large Noodle) #4014
1967+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO U30C Gold - DCC & Sound - Chessie System (C&O) #3312
MASTER MODEL FEATURES:
Adirondack floating bolster trucks with or without bearing caps as appropriate per railroad
Coupler pocket designed to accept AccuMate Proto-couplers
Golden-white LEDs
Antenna detail where appropriate per road name
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Directional lighting
With or without nose headlight as appropriate per railroad
Non-operating cab roof-top beacon detail where appropriate per road name
Detailed crew members
Marker lights with separate lenses
Snowplow
Separately-applied drop steps
Recommended radius: 22inch
ANALOG (DC) OPERATION FEATURES:
Please note that the Atlas Quantum Engineer will NOT operate an Atlas Gold Series locomotive equipped with a LokSound Select decoder on an analog (DC) layout. However, the sound and lighting functions of the LokSound Select decoder in the Atlas Gold Series U30C locomotive can be controlled by an easy-to-use basic DCC system
Also note that on a DC-powered layout, a DCC and sound equipped locomotive (such as the Atlas Gold Series U30C) CANNOT be consisted with another locomotive that does not
also have both DCC and sound. (This statement does NOT apply to DCC-equipped locomotives operating on a DCC layout.
Sound Functionality Features (Gold Models with ESU Sound Only ):
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals. Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided for true realism.
DCC OPERATION FEATURES:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
A total of six DCC function outputs are available
Follows all NMRA DCC standards and recommended practices.
Note: Due to the higher starting voltage required to operate the sound system, it is not possible to MU a non-sound-equipped loco in DC (analog) mode
Lubricant - Lite Oil - 1/2oz
Multi-viscosity oil with an additive that reduces its tendency to thin out at high temperatures. Good general-purpose hobby lubricant for most light to medium load-bearing applications. Includes extension tip for hard-to-reach areas.
For use on:
- R/C bearings and linkages
- HO and larger scale model railroad side rods, gears, journals and motor bearing surfaces
- Workshop and garden tools, small appliances and casters
Viscosity: cSt; at 40 Degrees Celcius ...47
HO 28ft Trailers w/Dolly - Motor Cargo (2pk)
MODEL FEATURES:
- Factory assembled with many detail parts applied
- Two different road numbers per pack
- Some SKUs feature multiple logos and/or decoration variations
PROTOTYPE AND BACKGROUND INFO:
The 28ft trailer provided LTL service for instances where a full size trailer would not be the most efficient. Splitting a haul into two creates more efficiency as one trailer can be spotted and then the second taken to a different destination without repacking. Many of the 28ft trailers can be seen in TOFC service to this day.
Spray Can - Bright Red (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
F30A 50Ft Flat Car: Penn Central #701987
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
HO Conrail (CR) G41A Repaint 1976 w/ Hoods PRR Shops G41A Coil Car
CR G41A Repaint 1976 w/Hoods illustrates an early CR repaint. Check out the thinner style CR logos, PC/CR style data stencils, and era appropriate ACI and PC/CR style double COTS. The early CR cars maintained their hoods for protection of the coil shipments. If you want to model the car later in their service lives, do not panic: The hoods are removeable. The interior troughs have all of that loading and identification data, too. The ends feature the original shorter style coupler lift bar brackets and Morton style crossover platforms. The 125-Ton trucks feature rotating Timken caps, 38in wheels and accurate brake beams with truck mounted brake details.
Also, these cars look great loaded with our all-new coil loads sold separately!
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
HO Enterprise 2-Bay Covered Hopper - New York Central (NYC Roman) #881536
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO Slopped Bearings Cap (8pcs)
HO SD40T-2 - DCC & Sound - Southern Pacific (Kodachrome) #8351
ETA: May 2023
Detailed Information
SP -KODACHROME- FEATURES:
Gyra lights (Operate in DCC)
Cab roof A/C
P3 horn
Standard range dynamic brakes
See-through lower air intakes
SP and Santa Fe during the mid-1980s was trying to become one railroad. They were so sure the merger would be approved, they started to repaint locomotives into their -new- corporate colors. Using SP red and Santa Fe yellow, they came up with this bright and vibrant scheme. Unfortunately, the then ICC denied the merger leaving an example of what some railfans nicknamed, -Shouldnt Paint So Fast-. By the end of the merger negotiations, SP only painted 3 -Snoot-nose- SD40T-2s. We are offering all 3 which have slightly different details between them.
ROAD NUMBER SPECIFIC FEATURES:
#8315
123inch Nose w/brake wheel
cab roof mounted bell
plows on both ends
modified front L window
GRIP battery box doors, Santa Fe style font numbers
#8351
116inch nose w/ratchet brake
cab roof mounted bell
plows on both ends
modified front L window
GRIP battery box doors
standard rear headlight
SP style font numbers
#8377
123inch nose w/brake wheel
frame mounted bell
plows on front end only
front L window
standard battery box doors
SP style font numbers
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Photo-etched windshield wipers
Separately applied air tanks
LED Lighting
HTC truck sideframes
Welded ECAFB
All-wheel electrical pickup
See-through dynamic brake fans
Separately applied wire grab irons
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox specific for the tunnel motor
Speed recorder attached to appropriate axle per prototype
McHenry operating scale knuckle couplers
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Fully assembled and ready-to-run
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO Black Rubber Diaphragms - 1 Pair
Product Information
Add detail to your passenger fleet with Walthers Cornerstone Passenger Car Diaphragms. This set includes two flexible, black rubber diaphragms to fill the gap between your streamlined passenger cars.
Spray Can - Linoleum Deck Brown (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Juneco Scale Models Canadian National F-Unit Sunshades
Code 83 or 100 Nickel-Silver Rail Joiners - pkg(48)
Product Information
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more! These Rail Joiners are correctly sized for use with Code 83 and Code 100 WalthersTrack, and are preformed of nickel silver for outstanding electrical conductivity. Pack includes 48 ready-to-use connectors.
HO Scenic Accents - Uniformed Travelers 6pk
HO Maxi I Well Cars - DTTX #73017 (5pk)
Era: 1971-1990, 1991-2009
MODEL FEATURES:
- Fine ladder detail
- Separately applied brake piping and trainline hoses
- Weighted for optimal performance
- Body-mounted McHenry lower shelf operating scale knuckle couplers
- Prototypically correct 33 and 38 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO RTR 60Ft Flatcar - TTX #91195
MODEL FEATURES:
Separately applied end details and brake wheel
33inch machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Decorated models fully-assembled and ready to run out of the box
Minimum radius: 18inch
Archer-Daniels-Midland ADM UELX #30223 (yellow, blue; Molecule Logo)
Expand grain traffic on your HO railroad with a fleet of these WalthersProto(R) hoppers! Based on the widely used 55 Ft Evans 4780 cars introduced in 1977 for grain service and still in use today, features of the models include: Limited edition - one time run of these road numbers!
Favorites for hauling grain & dried distillers grain (DDG)
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint & lettering
Ultra-smooth rolling metal axles and 36 inch wheelsets
Proto MAX(TM) metal knuckle couplers
N Scale Concrete Slab Double-Track Straight Viaduct - 9-3/4in (2pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly.
The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
32oz Shaker Dark Green
HO EMD SD9 - ESU LokSound 5 Sound & DCC - Southern Pacific #5371 - Black Widow
Power up your HO freight operations with Walthers Proto SD9 diesels!
The debut of the SD9 in 1954 marked the next step forward for EMD's Special Duty line of six-axle diesels, and introduced the new 567C prime mover delivering 1,750 horsepower. Ideal for demanding assignments in helper, yard, transfer and heavy freight service, with its weight spread over six axles, the SD9 was also well suited to branch line duties. By the time production ended in 1959, 515 SD9s were in service on over a dozen railroads and some are still going strong!
From superb paint and lettering to railroad-specific details, and available with ESU LokSound Select for DCC and DC layouts, WalthersProto SD9 locos come ready for service and feature:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1954 to the present - several preserved today
Used in helper, yard, transfer, heavy freight and branch line service
Available with ESU LokSound 5 sound and DCC for DCC or DC layouts
Road- and era-specific details
Formed wire grab irons
Etched-metal lift rings
21-pin DCC plug
Correct size RP-25 metal wheels
All-wheel drive and electrical pick up
5 pole, skew-wound, high-torque, high-efficiency can motor
Helical gears with 14:1 ratio for smooth, quiet running
Easy multiple-unit operation
Superb paint and lettering
Warm white LED constant and directional headlights
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
Road-specific features of this WalthersProto replica include:
Brass Nathan P3 air horn
Whip-style radio antenna w/mast and SP-style conduit
SP 5-light package w/Mars dual sealed-beam headlights, Gyralight & UDE emergency light for DCC; operating headlights & front Gyralight on DC units
Cab-mount wind deflectors
Photo-etched cab sunshades
Rolled-style handrail stanchions
Drop steps
SP-style pilot plows front and rear
Dynamic brakes
Roof-mounted air cooling piping
MU hoses
HO Hyundai 48ft Exterior Post - BNSF/HUB Group #684226
PROTOTYPE TYPE:
48ft Exterior Post containers were introduced in 1986 and were a common site on nearly all double stack container trains of the later 80s, 90s, and 2000s. These containers were used for domestic freight service and were purchased by numerous railroads and freight operators in large numbers. These containers were a unique design in which the front and side container panels were supported by aluminum channel posts mounted outside of the container box to provide additional capacity space for larger pallet stacks within the container interior. The posts are a simple spotting feature for these styles of containers. Hyundai was one of a handful of manufacturers of exterior post containers, and while nearly-identical in design to one of their competitors, the additional drainage channel on the top of the container at the head end, and full-height end corner posts differentiate this container from its competitors design. Some of these containers served secondary lives for more than one operator, leading to some interesting graphic combinations over their lifespans. Changes to over-the-road length allowances for 53ft containers and trailers brought about the eventual demise of the 48ft container and a majority of them were withdrawn from service during the mid-2000s and beyond, though limited numbers still remain in service today.
FEATURES:
Hyundai Roof Configuration Version:
A unique feature of the Hyundai design was the additional water drainage channel near the front end of the container and the forward vertical framing members that extended the full height of the container. We have modeled the detail that differentiates this container from those of other manufacturers of 48ft exterior post containers.
Sharp And Accurate Paint And Lettering:
Classonemodelworks.com provides accurate paint and lettering taken from photographs of the prototype, and numbering that matches the class numbers for each operator or railroad. Our containers come with the exterior posts already painted to match the aluminum color of the prototype containers and galvanized coloring for the upper and lower structural channels.
Accurately Dimensioned:
These containers have been accurately reproduced from hand-measured field dimensions of the actual containers, right down to every visible detail. Classonemodelorks.com stands for accuracy and we strive to provide that with every model we produce.
Accurate scale Door latching Details:
Classonemodelworks.com believes in providing models that accurately depict the prototype equipment. Keeping that as our core, we are proud to provide highly-detailed cast door locking bars, latching mechanisms, door bumpers and angled bar lifter.
NCE 167 N Scale N14K1 Decoder
Athearn EMD F45, Athearn EMD FP45
Kato Gevo ES44AC, Kato AC4400, Kato C30-7, Kato GE C44-9W, Kato SD40-2 early versions, Kato ES44, Kato SD40, Kato SD40-2 SNOOT, Kato SD45, Kato SD70MAC ,Kato SD70
HO - Nathan K5 Air Horn K5LR3
HO CA-9 ICC Caboose w/Lights w/DCC & Sound - Union Pacific #25668
ETA: August 2021
Detailed Information
PROTOTYPE AND BACKGROUND INFORMATION
Built by International Car Company in 1967, UPs CA-9 class numbered 100 cabooses. The cars were very similar to the earlier CA-8 and later CA10 designs, but had minor differences in end cages and windows. The cars originally featured square safety slogans, and these were later changed to rectangular slogans. The eye-catching safety slogans made the cars distinctive; the later slogan boards were removable and could be swapped from car to car, meaning that certain road numbers wore several over the course of their lives.
ROAD NUMBER SPECIFIC FEATURES:
#25658, 25668, 25661 Early slogans, P on cupola representing Pool service,unique scheme with 14 inch reporting marks and 8-inch -Union Pacific-, as- built or modernized cupola windows as appropriate
#906251 MOW Office car, painted -Kenefick green,- Era: 1990s+
#25629, 25616 Later rectangular slogan boards, red P on cupola representing Pool service, modernized windows, Era: late 1970s+
HO RTR ACF 4650 3-Bay Hopper - ATSF (Gray Ga-150) #305117
Date: BLT 6-65
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127420
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO GE C30-7 - DCC & Sound - ATSF Santa Fe (Early Scheme) #8039
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
Craft Plywood Sheet - 12 x 12inch x 1/8inch Thick - Single Piece
Perfect for painting, staining, stenciling and wood burning
Cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use
1/8inch (.33cm) Thick x 12 x 12inch (30.4 x 30.4cm)
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov
HO 20ft Corrugated Container - Hyundai/HDMU #2 (3pk)
MODEL FEATURES:
- Fully-assembled
- Easily stackable
- Each container is individually numbered
PROTOTYPE AND BACKGROUND INFO:
An intermodal container is a large, standardized shipping container, designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport ? from ship to rail to truck ? without unloading and reloading their cargo. Corrugating the sheet metal used for the sides and roof contributes significantly to the containers rigidity and stacking strength, just like in corrugated iron or in cardboard boxes. International containers have castings with openings for twistlock fasteners 20 feet apart on the eight corners, to allow gripping the box from above, below, or the side, and they can be stacked up to five units high for storage.
N Scale Double Crossover Track Set V7
Includes:
- Double Crossover track piece and matching straight track.
- Turnout control switch.
HO 1957-1965 Cadillac Eldorado Brougham - Sandalwood Beige, Stainless Steel
The Cadillac Eldorado was manufactured in the USA between 1952 and 2002 across 12 generations of the marque. Our Oxford replica in 1:87 scale is from the third era, panning the short period between 1957 and 1958, when it was produced with a distinctive body shell and rear wheel drive. With four doors, there was a choice of a convertible or closed top and our Oxford replica is closed. Elegant detailing included low down swept bumpers, elaborate tail fins with a steel ?beauty panel? section that ran from the rear wheel arches into the rear bumpers. Even the top edges of the tail fins are finished in chrome while the front bumper came in three sections. All these physical details are here on our replica, decorated in a sandalwood colour scheme with silver roof, in contrast to all the chrome. The interior is honey beige with a grey steering wheel. Our Cadillac hails from Illinois, Land of Lincoln number 456 789 in 1957.
At the time, this version was also the most expensive of all the Cadillac models.
Yellow Flowering Foliage - Covers 100 Square Inches
A great way to model wildflowers or create flowering bushes and add a splash of color anywhere on your layout! Available in two colors; Lavender and Yellow. Use for modeling flowerbeds along the railroad tracks, in fields, on hillsides or around buildings.
HO 5820 Covered Hopper - Procor/UNPX (No Procor Logo) #123521
Era: 1988+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO PC&F 5241 CUFT - Boxcar - Olympic Railroad (OLYR) - Single Car #75118
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Acrylic Flat Colors - Sky Gray - 3/4oz (23mL) Bottle
XF-19
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
60ft Pullman-Standard Flatcar - Ready to Run -- BNSF Railway
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Scale G2 SD90MAC Diesel - DCC Ready - Norfolk Southern #7290
Detailed Information
NS FEATURES:
Primed for Grime
Patches match prototype deletion of UP reporting marks
Different patch shapes, paint color, & slogans per road number
Former UP units; major spotting details remain the same
EOTD above left rear of fuel tank
This group consisted of 110 second-hand units in total, 100 coming from UP and 10 from CEFX. Purchased with rebuilding into SD70ACus in mind, but were used in service as-is for a time before being rebuilt.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Mobilgas #248
Date: BLT 9-28
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
HO 85ft ACF 44-Seat Coach w/lights - Union Pacific (Katy Flyer) #5468
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
Built as a coach in 1954 by American Car and Foundry, the Katy Flyer provides seating for 44 passengers. The Missouri-Kansas-Texas joined the UP family in 1982, and this car was renamed in 1993 for a train that ran from St. Louis to Galveston, Texas, for 65 years. The Katy nickname came from the KT in the roads MKT reporting mark.
HO 50ft Waffle HC Plug Door Boxcar - MEC #27111
MODEL FEATURES:
- Separate brake wheel
- Body-mounted McHenry operating scale knuckle couplers
- Machined wheels with RP25 contours
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
G2 Dash 9-44CW - DCC & Sound - CN #2588
ETA: Late October 2022
Detailed Information
CN FEATURES:
CN -teardrop window- cab
Nathan K3L airhorn
Canadian style ribbed anticlimbers
Electronic fuel gauges
Spare knuckles on rear pilot
No air condiitoner
Late (angled) stepwell gussets
Canadian AAR style control stand
Front and rear ditch lights mounted on anticlimbers
Standard medium front snowplow; small CN style rear rock plow
Wi-tronix antenna included in poly bag; install for 2010+ era
CN NOTES:
After receiving an order for Dash 9-44CWLs with Canadian 4-window cabs, CN reverted to the standard 2-window configuration for its subsequent orders. However, to increase the crews visibility, CN requested that the front windows be modified with angled panes (these are known as -tear drop- windows).
DASH 9 SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 60ft Bulkhead Flatcar - TTPX #804168
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
HO Gunderson 6276 50Ft Plate F Boxcar - TTX (2016) #506491
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - CIL Monon #9073
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO - 3D Joy Sign (3/Pkg)
Formed Wire Grab Irons - Curved Caboose pkg(25)
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - GATX #55378
Built: ARG 8-60
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
HO NSC 60ft Ingot Flat Car - HPJX National Steel Car
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
HO 48ft Galvanized Steel Stiffened Backdrop Grain Bin - Kit
(Narrow - 2.66 inch Corrugation)
(NOTE: this backdrop bin is not a full round bin - it is cut 4ft beyond halfway to simplify placing the bin against a flat backdrop while still allowing room for the walkways, conveyors, and other equipment at the top.)
Corrugated steel grain bins are a staple in any agricultural setting, placed on farms, elevators, industries, and beside railroad tracks. Used with a variety of farm commodities, these bins provide a safe, dry place to store that commodity until it goes to market.
With several styles to choose from, these grain bins will look right at home on your layout. They feature prototypical corrugations, realistic galvanized steel appearance, various side sheet heights, and a variety of diameters.
Narrow corrugation bins have corrugations spaced a scale 2.66 inches and the rings are 32 inches tall. Wide corrugation bins have corrugations spaced 4 inches apart with 44 inch tall rings.
All bins are easy to assemble - just stack the rings, glue them together, attach the roof and you are done! Every ring comes as one solid piece, so no time consuming and messy assembly of individual side sheet pieces to create each ring, saving you time and frustration!
What size bin will fit your space? Try our grain bin size calculator or printable template.
https://www.iascaled.com/store/GrainBinSizeCalculators
https://iascaled.com/docs/ho-bin/GBM-HO.pdf
HO FMC 5077 SSD Boxcar - CSX #141539
(CSXT QUALITY CAR W/CONSPICUITY STRIPES)
MASTER MODEL FEATURES:
- Single or Double Sliding Door where appropriate
- Multiple body styles
- Metal knuckle couplers
- Plate B Box Car
- X-Panel Roof
HO MOBILE OFFICE CONTAINER ARIES
Features:
All New Tooling
Accurate Doorway, Window and Light Fixture detail
Separately applied parts include air conditioner units and electrical equipment
Crisp Painting and Decoration
Detector Hot Box Set
Nonworking kits include casting to build a typical installation and instructions.
To prevent derailment, the prototype for this equipment monitors passing trains for overheated wheel bearings.
HO & O Gauge LokPilot 5 DCC Decoder - 21MTC NEM660
Features:
We know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5DCC packed with function outputs. Depending on the interface version, each LokPilot offers 5 DCC Decoder at least 10 amplified function outputs with 250mA output current each. In the executions with PluX22 or 21MTC interface there are 4 outputs to control servos or Logic level outputs added. All-important lighting functions are available. The brightness of each output can be set separately. The decoder masters automatic pushing and pulling when uncoupling for ROCO, Krois and Telex couplings.
Motor control:
The engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors. Operation - The typical hum is a thing of the past. The load control now has up to10 CVs which can be adjusted for difficult cases. The unique Autotune function enables the automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to 1.5A of motor current. Enough juice even for older motors.
Operational safety:
On request, a Power Pack can be fitted to the LokPilot 5 DCC to bridge dirty rail sections.
Protection:
Of course, all function outputs and the motor output are protected against overload.
We want you to enjoy your decoder for as long as possible.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - New Haven (Script) (6pkg)
6-Pack includes the following numbers, all individually packaged: #30004, #30009, #30042, #30084, #30172, #30294
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 60ft Flat Car - Southern Pacific #599322
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
VIA RAIL (EARLY) (1978 to mid 1990s)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
Peco PL10 Switch Machine
Easy-to Install Motor for Peco Turnouts
Unit installs directly beneath the turnout and makes positive contact without linkage or other complex connections. Just cut a hole in your bench work deep enough to clear the motor and install.
The pin is 3cm long.
Simple, reliable and good value. Requires a rectangular hole 40mm x 24mm when clipped directly to the underside of a Peco Turnout. Use the PL-12/12X if above baseboard mounting is required; attaching PL-13 and 15 Switches will enable switching for automatic polarity etc.
Recommended to be used with:
PL-26 Passing Contact Switches
PL-34 Turnout Motor Wiring Harnesses
PL-27 Switch Console Units
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Early CWSX #140085
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO NSC Ballast Hopper - Canadian National (Branchline) #90005
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO - Siemens ACS-64 - DCC & Sound - Amtrak #619
Features:
DCC sound-equipped ACS-64 includes a TCS WOWSound CD-Quality 16-bit 44,100Hz decoder with Audio Assist
Sounds package includes: horn, bell, cooling fan/power inverter, pantograph extension and retraction, coupler close/release, brake release and application, momentum, crew alert, grade crossing quill, departing and arriving station announcements, and more
Keep-Alive device for uninterrupted operation, even over dirty track and remappable light functions, die-cast frame, and selector switch for choice between rail and pantograph operation.
Performs best on 22inch radius curves or greater
HO Scale 1:87
Product Measurements: L 9.5 in., W 1.5 in., H 2 in.
Retail Package Measurements: L 12.5 in., W 2 in., H 3.5 in.
HO Scale 85 ACF Dome Diner - Union Pacific 8008 (Heritage Fleet, City of Portland; yellow, gray)
In response to many requests, Walthers is pleased to announce HO models of the historic Union Pacific train honoring the late President George H. W. Bush, which will include a WalthersMainline SD70ACe 4141, and select WalthersProto cars from the Heritage Fleet. Each car comes fully assembled for operation or display, with a variety of features as noted below. Perfect for fan trips and special events behind 4141 and other UP power
First time with factory-printed UPP numbers and car names
Baggage car includes full-color Presidential Seal decal
Finished in modern-era UP excursion scheme
Factory-installed grab irons
Prototypically accurate window tinting as appropriate
Delivered new from American Car & Foundry in 1955 as 8008, this car was sold to the original Auto Train in 1972 and remained on its roster until 1981. A year later it was transferred to Kansas City Southern, where it was to be renumbered as car 19, but never saw service. UP reacquired the car in 1990 and named it for its Chicago-Portland Streamliner that ran from 1935 to 1971.
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24inch radius is recommended for operation.
HO F89F Trailer - RTTX/Yellow #154350
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast underframe
- Wire formed brake plumbing
- Detailed deck
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Minimum radius: 22 inches
- Recommended radius: 24 inches
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Erie (6pkg)
6-Pack includes the following numbers, all individually packaged: #79008, #79054, #79076, #79091, #79153, #79192
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO SD90MAC-H Phase I - DCC & Sound - Union Pacific #8520
Detailed Information
UP FEATURES:
#8503 & #8500 represent the first renumbering, originally delivered as #8203 and #8160 respectively.
#8509, #8512, and #8520 are modeled with the starter capacitor removed and the EOT mounted further forward on the fuel tank.
Union Pacific became the only buyer of the SD90MAC-H, known to them as SD90AC, when Canadian Pacific transferred their order to the Phase 2 variant. The first 7 were considered pre-production units and wore 2-3 numbers during their lifetime. The 8500 series we are offering represents the second and third order of SD90MAC-Hs that were delivered between 1997-1999 and before their final renumbering to the 8900 series.
SD90MAC-H SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and ?printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO Scale NSC 73Ft Centerbeam Flatcar - BNSF #563181
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Early Yellow) #475230
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
Western Cullen Hayes Flashers - pkg(2)
HO Value Line RTR - 13 Panel Coalporter - CSXT (Gray) #390544
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO Code 100 #6 Mark V Turnout - Right
HO Code 100 with black ties and nickel silver rail. Custom-Line Turnouts have metal frogs that can be powered if necessary.
HO 50ft PS 5344 Boxcar - MMA #15288
MODEL FEATURES:
-Decorated models fully-assembled and ready to run out of the box
-Highly-detailed, injection-molded body
-Separately applied wire grab irons
-Separately applied brake wheel and end ladders
-Etched end platforms
-Machined metal wheels
-Weighted for trouble free operation
-33in solid nickel silver wheels with RP25 contours operate on all popular brands of track
-Body mounted McHenry operating scale knuckle couplers
-Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
-Replacement parts available
-Minimum radius: 18in
PRIMED FOR GRIME MODELS FEATURE:
-Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
-Faded base colors matched to the prototype
-Patches applied and shaped per road number matching each corresponding side to the prototype
-Perfect starting point for adding grime and rust
PROTOTYPE AND BACKGROUND INFO:
It was the mid 1970s, and the incentive per diem box car boom was just beginning. New, brightly painted box cars seemed to appear overnight. Many were lettered for various short lines. Pullman Standard (PS) was a significant builder of many of these cars. The 50ft outside post, non-terminating end box car, became the foundation for new per diem cars built in the 1970s. The 50ft PS cars also varied in door configuration and style to better suit each customer.
Today box cars still matter to the railroads. Even with modern containerization, box cars have a higher capacity then allowable on US roads. We are finding today, that 1970s box cars are being rebuilt and put into service for various leasing outfits. These models can still be seen today in the modern railroading scene.
HO 40Ft Fruehauf Exterior-Post Volume Van - Lehigh Valley #200021
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
HO ACF 4600 3-Bay Centerflow Hopper - Grand Trunk #138190
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
Maxi I Well Car - 40 Ft- 5 Car Set - Early - K Line/ Rail Bridge #1019
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched walkways
Separately applied brake piping and trainline hoses
Fine ladder detail
Delicate cross-bracing on the floor
Weighted for optimum performance
Razor sharp painting and printing
Prototypically correct 33 In and 38 In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry lower shelf operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18 In
White Spirit Enamel Thinner - 100ml Bottle
All-New bluetooth controlled Tsunami2 DCC Sound Decoder
Blunami will change the way you enjoy the model railroading hobby
The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.
Currently the app is only available for Apple iOS devices (versions 8 or newer). The app offers an easy graphic interface to adjust all Blunami settings and features with drop-downs and slider bars. All programming can be done through the app, as well as with your DCC system. You no longer need to understand CVs or own a command station to run your trains!
HO Thrall 5-Unit Rebuilt 40ft Well Car - BNSF #238212 (A-E)
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40ft Well Cars! As the 53ft container quickly became the standard for domestic shipping, older well cars built to carry 48ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40ft on both single and five-unit cars. Today they can be seen carrying 20ft and 40ft containers in the well, with 40ft and 53ft units on top. Fully assembled and ready for service, the models feature:
- One time run of these roadnumbers - limited quantity, order now!
- 100- and 70-ton roller bearing trucks
- Correct 36 inch and 33 inch RP-25 turned metal wheelsets
- Heavy die-cast metal frame for superb performance empty or loaded
- Finely molded 3-D brake rods with chains, brake piping and weld lines on body
- Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
- Proto MAX(TM) metal knuckle couplers
CP (large CP logo) - 53ft high cube 8-55-8 containers with magnetic system and corrugated-sides
10 rib vertical front with one hazard placard, and NO document box
1-3-1 Doors (parallel handles) with one hazard placard and NO document box
Scheme specific sides with one hazard placard and four outer vents Features:
All new 8-55-8 container series with scheme specific tooling for placard placements on the sides, doors and front. Includes doc box and GPS unit when appropriate
Different doors and fronts tooled to match prototype photos
IBC (Inter-Box Connecting pins) in scale ISO 40ft locations
TC magnetic connecting system: magnets on bottom & metal top plate
Detailed printing as per photographs
Models come in packages of TWO, unless noted otherwise
The IBC pins mate with with ALL JTC containers, including JTC 40ft open top containers with magnets, JTC 20 containers with magnets; Atlas 40ft containers, JTC flatrack containers, JTC 53ft and 48ft containers and future Jacksonville Terminal Company containers
Compatible with JTC Retro-fit underframe kits to stack M-T and S-T brand containers on top
HO GP9 - DCC & Sound - Northern Alberta Railways #204
ETA: May 2023
Detailed Information
NAR FEATURES:
Winterization hatch
Canadian-style slotted steps and footboards
Canadian-style angled handrails
Bell mounted on the short hood
Peacock wheel hand brake
M-3 horn with all bells forward
Northern Alberta Railways rostered eleven total GP9s, numbers 201-211. The paint scheme depicted here was in use from 1965-1975. The road was jointly owned by CP and CN until 1981, when CN bought out CPs share of ownership. NAR GP9s could be found leading both freight and (with the help of a steam generator car) passenger trains.
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 53Ft Railgon Gondola - Chicago & North Western #350047
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft Railgon Gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
A great addition to your HO freight car fleet, the models feature:
-Based on Railgon 310000 series cars
-Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
-Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
-100-ton roller-bearing trucks
-Correct 36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
1/2 inch OD Round Aluminum Tube - 0.029inch Thick x 12inch Long
Round Aluminum Tube (1 pc)
Outside Diameter: 1/2 inch
HO Budd Slumbercoach - Amtrak (Phase 1) #2027 Loch Ness
All new from the ground up, the Rapido Slumbercoach features:
Designed from original blueprints
Full Rapido level of underbody detail including separate pipes and conduits
Full multi-color interior detail including roomette doors
Track-powered interior lighting (operable on both DC and DCC)
Accurate GSC 41-NDO-11 trucks with disc brake detail
Etched-metal end gates
Sprung diaphragms
Rapidos renowned stainless-steel finish
HO RTR ACF 4650 3-Bay Hopper - Norfolk & Western #171036
Date: NEW 6-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO 85ft General American G85 Flatcar - Erie Lackawanna #8799
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
HO F89-F Bi-Level Auto Rack - Illinois Central/BTTX #930368
Detailed Information
MODEL FEATURES:
Die-cast underframe
Authentic undulating safety railing
Accurate Whitehead and Kales Auto Rack
Early or late train lines and cut levers per prototype and era
Customer installed end bridge plates (included in box where applicable)
Detailed deck
Wire-formed brake plumbing
Separately applied hand brake per prototype
Separately applied wire grab irons where applicable
Prototypical ride height
70-Ton roller bearing trucks with animated rotating bearing caps installed
Trucks with animated rotating bearing caps
Minimum radius: 22inch - Recommended radius: 24+inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
HO Class D10h 4-6-0 - DC/Silent - Dominion Atlantic #1040
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
Dry Transfer Signs - Tavern, Gas Station & Commercial
Full-color dry transfers can be applied to a smooth or texture surface such as wood, metal or plastic by positioning the sign in the desired area, rubbing gently on the back and peeling away the carrier sheet. One 4 x 5 inch sheet per package.
Rock Molds Random Rocks
Highly detailed, flexible and durable rock molds can be used to cast small boulders, rock outcroppings, top rocks for fields and creeks, or make entire rock faces by combining castings produced with these molds.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14036
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Scale - High Voltage Power Transmission Wire - 100Ft 30m (Non-working)
Detail your HO power grid quickly and easily with this special nonworking wire from Cornerstone! Perfect for modeling high-tension electrical lines, the material stays flexible for easy installation, hangs like the prototype and bounces back if bumped. Each spool includes 8700 HO Scale feet (100Ft 30m actual length) of material.
HO 4-Bay Cylindrical Grain Hopper - Heritage Fund #396400
FEATURES:
- blackened metal wheels
- body mounted couplers
- non-magnetic axles
HO EMD SD9 - DC/Silent - Chicago & North Western #6614
Chicago & North Western
- Rebuilt at the Oelwein Shops with chopped down nose - a first in HO Scale!
- Modified panels on side sills of locomotive
- Modified/plated over details of dynamic brake blister (Smooth plating over where grilles once were)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO International 4300 Utility Truck w/Drill - Assembled - Yellow
Product Information
Licensed replica of popular International trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled and painted
Die-cast metal and plastic parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
Introduced in 2002 to replace the 4000-series trucks of the 1990s, the medium-duty 4300 was built in three variations and became a very popular chassis for a variety of commercial applications. Today, theyre still in production as the International Durastar.
INTERNATIONAL(R) and other International Truck trademarks are licensed by International Truck Intellectual Property Company, LLC.
HO Greenville 86Ft Quad Plug Door Box Car - X60R Repaint 1976+ Large Logo - Conrail #295618
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Conrail (CR) -X60GR Repaint 1976+ Large Logo- is our first Greenville 86ft auto parts offering in the -early Conrail- era. These X60GR class cars represent the former Penn Central X-60-R original delivery cars that were produced in 1970. Conrail repainted some of these cars at Meadville, PA at the former EL shops, complete with a gigantic can opener between the paired set of doors. These 1970 cars have truck-mounted brake gear, End-of-Car Cushioning components and Gypsum crossover platforms along with accurate 70-Ton trucks and 33inch wheels. Our Conrail 1976 models are ready to operate with four different road numbers!
HO ACF 3560 Covered Hopper - Georgia Pacific #1000
Features:
-True scale dimensions with accurate details
-Weighted, detailed underframes
-Equipped with AccuMate Knuckle Couplers
-Trucks equipped with free-rolling metal wheels
-Accurate painting and lettering
HO Marine Industries Piggyback Flatcar - Canadian Pacific #505643
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
HO USRA Double sheathed wood boxcar
Wabash
Includes road numbers 79687, 79834, 79945, 80176
During World War I the US railroads were struggling to keep up with wartime traffic, in part because of a shortage of service- able freight cars. In an attempt to solve this problem, President Wilson nationalized the railroads under the United States Railway Administration, or USRA. One of the first tasks assigned to the USRA was to develop common designs for new freight cars. Among these was a 40ft double-sheathed wood boxcar with a fishbelly steel underframe.
Starting in 1918, nearly 25,000 copies of the double-sheathed boxcar were built and delivered to 24 railroads throughout the country. The cars were well received, and many cars continued in regular service on many roads into the 1950s with many updated to the newer AB-brake system.
Rapido’s new model of the USRA double-sheathed boxcar features an all-new body with correct fishbelly underframe and correct free-standing details. Models will be equipped with either KC or AB brakes as appropriate. These cars fill a need for a state-of-the-art model of this common car on any transition-era or earlier period layout.
Model Features
Accurate new tooling
Correct details including roof and handbrake
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Accurate decoration
Fully decorated and assembled
Factory-installed Macdonald-Cartier couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO - Alco Brake Chain Guide
HO 45ft Trailer - Florida East Coast #630537
MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- Fully-assembled and ready to use out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
Tru Color Paint - Aerosol Spray Paint Can - Weathered Black- 4.5oz (135mL)
Tru-Color Aerosol Spray Paint is ideal for painting any model when you dont have an airbrush. This solvent-based acrylic paint is great for weathering and wide-are coverage. Available in railroad and weathering colors, Tru-Color spray paint comes in spray cans as well as in liquid colors designed for brush or airbrushing.
HO Scenic Accents - Wallys Weiner Wagon - Scenic Accents(R)
All Scale Learning Kit - Scenery Details
Learn simple techniques for creating detail on any layout. There is enough material included in this kit to detail a 2 x 2 feet surface.
Value-packed tools specifically developed to teach beginning modelers and other hobbyists how to use the Terrain and Landscape Systems. Learn to sculpt terrain, cast, color and install rocks, landscape various scenes, create paved areas, make trees, model water features and other scenic details. Reseal packages for easy storage.
Blackened Track Nails - Approx 300 per Pack - 0.7oz 20g - Fits Code 83 & Code 100
Product Information
Simplify your next HO Scale track project using WalthersTrack Blackened Track Nails featuring:
Sized to fit molded starter holes on underside of all WalthersTrack Code 83 and Code 100 products
Preblackened to easily blend with ties
Each measures 1/2inch (1.3cm) long to easily secure track to subroadbed and benchwork
Great value with 0.7oz (20g) - approximately 300 nails - in every pack
N Scale Graffiti Decal Set - Contemporary Graffiti #1 - Waterslide Decals
HO Value Line RTR - 13 Panel Coalporter - Conrail Quality #505513
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO MP15DC - DCC/Sound - CITX #1531
FEATURES:
- Three different hood styles (angled air filter box, square air filter box, standard hood)
- Exhaust stacks: with or without muffler
- Long hood sand fill: recessed or extended
- Rear sand fill: Three variations of sand boxes behind cab
- Pilot: standard or with snow plow
- Separately-applied scale detail parts include: windshield wipers, metal grab irons, coupler cut levers, multiple-unit hoses, snow plow, train line hoses, fine scale handrails, and more!
- See through step detail on sill
- Etched metal radiator grilles
- Painted crew members
- Factory-equipped with AccuMate knuckle couplers
- Coupler pocket designed to accept AccuMate Proto-couplers
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Directional lighting with golden-white LEDs
NON-SOUND UNIT FEATURES:
- NMRA 8-pin plug for DCC (Decoder-ready)
SOUND UNIT FEATURES:
DCC Operation
- Supports all DCC-programming modes
- Flexible mapping of function keys F0 to F28.
- A total of six DCC function outputs are available
- Follows all NMRA DCC standards and recommended practices
Analog (DC) Operation
- The LokSound Select Dual-Mode decoder allows your Atlas Sound locomotive to be used on DC as well as on DCC layouts.
- Please note that the Atlas Quantum Engineer will NOT operate an Atlas Sound locomotive equipped with a LokSound Select decoder on an analog (DC) layout. However, the sound and lighting functions of the LokSound Select decoder in the Atlas Gold Series C424/425 locomotive can be controlled by an easy-to-use basic DCC system.
- Also note that on a DC-powered layout, a DCC and sound equipped locomotive (such as the Atlas Gold Series C424/425) CANNOT be consisted with another locomotive that does not also have both DCC and sound. (This statement does NOT apply to DCC-equipped locomotives operating on a DCC layout.)
Sound Functionality
- Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
- There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
SD70MAC Diesel, w/ DCC & Sound - TFM #1649
Era: 2012-2018+
EMD SD70MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
First time ever with front and rear Rubber MU hoses, Trainline hoses, Cut levers, and rear Spare
TFM FEATURES:
As delivered, KCS of Mexico. Unique nose stripes and TFM flag.
LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PROTOTYPE SPECIFIC INFORMATION
During the early-1990s, EMD teamed-up with German engineering company Siemens to produce a freight locomotive that was capable of providing AC-traction drive currents, and thus providing a high-horsepower rating and lower fuel consumption for railroads which had an ever-increasing demand for saving fuel consumption by using a lesser amount of units to haul most of their trains.
The EMD SD70MAC was first introduced in early 1993, and began production later-on during the same year after numerous tests and improvements were made. Since then, the EMD SD70MAC has been a staple of heavy freight lines across the country.
HO EMD FT A+B Set - DC/DCC/Sound - Northern Pacific (NP Pine Tree Scheme) #5409D + 5409C
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO EMD FT A+B Set - DC/Silent - Boston & Maine (B&M Maroon Scheme) #4212A + 4212B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
Spray Can - NATO Green (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
CurrentKeeperII
Introducing the More Compact CurrentKeeperII!
Not all models are made the same, and some are a TIGHT fit for a decoder installation. The CurrentKeeper is now available in two sizes to fit more models and make your installs easier! Keep more of your trains running even over dirty track and switches!
The NEW SoundTraxx CurrentKeeperII is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup or dead frogs to ensure reliable operation of any locomotive in your fleet. It measures 20.1 x 13.2 x 11mm.
● Maintains power to the decoder for up to 10 seconds during electrical interruptions
● Compatible with NMRA DCC Standards & Recommended Practices
HO 40ft ACF Modernized Welded Boxcar - Pennsylvania Railroad #87516
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO SD70ACU - DCC Ready - Canadian Pacific (Beaver Scheme) #7050
ETA: October 2023
Detailed Information:
CP FEATURES:
CP System Red with new monochrome Beaver logo
Traditional nose detail configuration
Blue flag bracket
Center mounted nose door lock
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20001
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Gunderson Multi-Max Auto Rack - Norfolk Southern
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
12 inch Long Round Music Wire - 0.032inch Diameter pkg(4)
Round Music Wire - package of 4
Outside Diameter: 0.032inch
N Scale Code 80 Wooden Tie Flex Track - Streamline - 25pcs
36inch 91.4cm Section
Peco HO Code 83 SL E 8382 Streamline #8 Electrofrog Turnout - Nickel Silver Left Hand
Brown Ties - New North American-Style Turnouts from Peco
These new HO Scale Code 83 turnouts from Peco add more track options for modelers who use Code 83 track. Based on American Railroad Engineering Association drawings, these turnouts have been designed to meet NMRA standards. Peco Code 83 track features ties molded in creosote-colored flexible plastic that mimics the look of the prototype, plus wood grain, tie plate and appropriate spike details. All track and turnouts feature the correct prototypical tie spacing and all are DCC friendly.
Electrofrog turnouts and crossings feature powered (conductive) frogs for enhanced locomotive electrical pickup and may require special wiring/rail gapping in certain track configurations. Instructions are included with each turnout.
Shipped from Ontario Canada
Yellow LED (603 size)
HO GATC 1917-Design 10,000 Gal. Tank Car - ARR Alaska Railroad 1955+ #9011
Product: GATC 1917-design 10000 Gallon Tank Car
Scale: HO Scale 1:87.1
Truck: Tangent ASF 50-Ton Cast Steel Spring Plank Truck with separate brake beams
Wheels: CNC-Machined 33inch Flat Back Wheels
ARR -Alaska Railroad- 1955+ is a tank car offering that many of you have asked for over the years. This tank car is painted in the Alaska Railroads silver tank paint scheme with black lettering, with paint and brake dates of 1955. The tanks other lettering shows a 1919 car build date. The underframe is black with white stenciling. These cars were in various services however the primary service for the fleet was to move oil from North Pole to Anchorage. Our Alaska Railroad 1955+ replicas come with era-correct AB-brakes.
HO SD70ACe - DCC & Sound - Tacoma Rail #7002
Detailed Information
TMBL NOTES:
Tacoma Rail 7001 and 7002 are former EMD Demonstrator units. The road acquired the units in 2014 and painted them into this attractive red & white scheme. The pair are the most powerful units on the current TMBL roster and are often found running together or mixed with other members of TMBLs eclectic motive power stable.
SD70ACE SERIES LOCOMOTIVE FEATURES:
Full cab interior
Coupler cut levers
Flexible rubber trainline hose
Etched see-through steps
Lift rings
Wire grab irons
See-through cab windows
Flexible rubber MU hoses
Walkway tread
Sander lines
Windshield wipers
Accurately-painted and –printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch — Recommended radius: 22inch
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights on front trucks
Illuminated marker lights (where applicable)
All Scale - Woodland Classics - Ready Made Trees - Cactus Plants pkg(13)
1/2 to 2-1/2inch 1.3 to 6.4cm
Circuit Board Power Bus,
HO-Scale / Fits: RS-2, RSC-2, SD40-2 Sold out at Kato
HO GP40-2 - DCC & Sound - ONT #2200
Detailed Information
ONT FEATURES:
Ex-B&M
Corrugated grilles
Non-dynamic hatch
Front and rear ditch lights
Side-mounted hood bell
M3 horn on long hood
Blomberg M trucks
Large fuel tank
Large front anticlimber
Small EMD front plow
Lit number boards and class lights if equipped (effect in DCC)
The Ontario Northland Railway is operated by the Ontario Northland Transportation Commission, part of the government of Ontario, Canada. Purchased in 2005, these ex-BM GP40-2s were repainted into this bright and vibrant scheme. A few kept their nose class lights after rebuild. The units have been seen operating in both freight and passenger service.
ROAD NUMBER SPECIFIC FEATURES:
#2200
Ex BM 311; class lights
#2201
Ex BM 300; removed class lights from nose
#2202
Ex BM 304; nose class lights only
GP40-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 40ft ACF Welded Boxcar w/8ft Youngstown Door - Wabash #90207
Create authentic freights for your diesel-era layout with the Walthers Mainline 40ft American Car and Foundry Welded Boxcar with 8ft Door! Introduced in the late 1950s, the wider door opening was popular with shippers and receivers, allowing fast and easy access for forklifts.
Serving into the 1980s, these layout-ready models feature:
-Limited edition - one time run of these road numbers!
-Prototypes in general freight service from late 1950s to 1980s and beyond
-Detailed 10-panel body
-8ft Youngstown doors
-Late Stanray 4/4 improved Dreadnaught ends
-Stanray diagonal panel roof
-Apex see-through steel running boards
-Correct 33in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO SD45-2 - DCC & Sound - Santa Fe #5659
ATSF FEATURES:
Early style anticlimber
Snowplow
Air Conditioner
Can style radio antenna on raised ground plane
Beacon (Functions in DCC)
SD45-2 LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
Union Pacific COSF #9009
Heritage Fleet UPP City Of San Francisco
As UP transformed its Streamliners into Domeliners in 1955, 15 new Dome-Lounge Observations were delivered to bring up the rear of the flagship streamliners. Within a year however this proved to be a problem. The cars quickly lost their unique ends and were rebuilt as Dome-Lounges. Named for the famed UP-SP-CNW Streamliner, the prototype has its original windows and lighting for use at the end of the train.
Metrolink #857
Teal Ribbon Repaint
Model Features:
Scaled from field measurements & diagrams of a GO F59PH
End metal handrails with plastic stanchions
Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
All-metal etched grilles
Full cab interior
Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
Operating headlights, rear light, and ditch lights
GO units feature functioning tri-color class lights (white, green and red)
American units feature functioning red marker lights
Accurate sounds recorded from a GM 12-710G3A
DCC/Sound units come equipped with an ESU LokSound decoder
HO 40Ft Wood Reefer - Canadian National #207027
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch
1950-54 34Ft Tandem Fruehauf Trailer - Unpainted and Resin Cast Kit
HO Union X-3 Tankcar - Products Tank Car (PX) #32497
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
Acrylic Flat Colors - Deep Green - 3/4oz (23mL) Bottle
XF-26
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
DS74 - Quad Switch Stationary Decoder
- Quad switch decoder for Solenoid or Slow-motion turnouts.
- Configurable for Capacitive Discharge with balky solenoids.
- Configurable for on/off control of 8 layout lights.
- Plug and play wire connectorization.
- Works with compatible LocoNet Systems.
- Stabilized and adjustable output voltages.
- Option setup switches for configuration.
- On-layout programmability via LocoNet.
- 8 onboard Routes, with EZ-Route setup.
- Routes directly editable using latest DT602 IPL.
- 8 input lines for Switch and Detection inputs.
- Field firmware update via IPL over LocoNet.
- DC 2mm jack for reliable power input.
- Optional DCC track inputs for limited feature capabilities.
3D Railroad Wall Artwork - CN Modern Logo
Noodle
60ft Pullman-Standard Flatcar - Ready to Run -- TTX VTTX, 20ft and 40ft container loading
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Coarse Turf Green Bag 25.2 in (412 cm)
Models low grasses, leaves and weeds. Adds texture and highlights to trees and scenery. Provides a smooth transition from low ground cover to medium and high ground cover. Available in 11 natural colors. Attach with Scenic Cement. Purchase the Scenery Manual for additional information on how to use the Landscape System.
Particle size is approximately 1/32inch x 1/8inch (0.79 mm x 3mm)
HO Scale NSC 73Ft Centerbeam Flatcar - Trailer Train (TTZX) #861322
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
Kalmbach Publishing Book -Model Railroaders Guide to Bridgers and Trestles
The Model Railroaders Guide to Bridges & Trestles from Kalmbach is your one-stop source for information on prototype bridges. This book will guide you through the history of the various bridge types from the first days of railroading through today, showing older bridge types still in use, older bridge types that are now obsolete, and new concrete and steel designs. This also book includes the history of various types of bridges, tells about how bridges have evolved in design and size and how bridges fit in with other related scenic elements. It also discusses many bridge types including wood trestles, stone and concrete arches, culverts, wood and steel truss bridges, steel plate-girder bridges and cantilevers. Its loaded with information to help model railroaders choose appropriate bridges for the region, era, and type of railroad they model. Model Railroaders Guide to Bridges & Trestles is one of many Kalmbach model railroading how-to books.
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
HO EMD SD10 - DC/Silent - Dakota, Minnesota & Eastern #550
Dakota Minnesota & Eastern --Conditional Announcement-
- Ex-SOO, nee-MILW units - same features
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO 50ft NACC Boxcar - Hamms #31217
MODEL FEATURES:
- Three road numbers
- Applied metal grab irons and etched end platforms
- Pullman Standard or Superior plug doors
- Pullman Standard or Stanray (Superior) roof (to match prototype)
- Ready-To-Roll 70 ton trucks
- Machined 33 inch metal wheels with RP25 contours
- Body mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Minimum radius: 18 inches
EMD GP9 Phase II, High Short Hood - Standard DC - Penn Central #7139
(black, white, Large Logo)
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today.
Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21-pin DCC plug
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
Based on units in service from the 1960s to 1970s featuring:
Leslie RS-3L air horn
Sinclair radio antenna
Long-hood forward operation
Pyle early dual sealed beam headlight
Etched metal sunshades
HO 70-Ton 12-Panel Hopper - Denver & Rio Grande #14638
Blt.6-66
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127439
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
Signal Attachment Cable - All Scales Signal System Dual 4-pin harness DIY set
GMD SD40-2f - DCC Ready - CP (Rect Porthole Sill Dashes) #9012
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
HO Dash 8-40CM - DCC & Sound - Canadian National: Stripes #2423
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
Colored Weathering Powder - Grimy Black (1oz)
There are several basic methods and approaches to using these powders and we are sure you will probably develop a few of your own! These powders are intended to make rolling stock, buildings, and detail pieces look old, dirty, dusty, rusty, faded, and generally the worse for wear after being exposed to the elements of weather, travel, pollution, and mechanical wear and tear.
HO G2 SD80MAC - DCC & Sound - CSX/YN2 #4591
CSX FEATURES:
Former CR units
Operating forward and reverse red marker lights
Correct horn and antennas per road number
Approved by CSX experts
Just as a batch of SD80MACs were sent to NS after the CR split, CSX acquired a batch as well. After a short period of running around patched, they were all repainted into CSXs -YN3- scheme. Only one, CSX 801 (which was renumbered to 4591), received the -YN2- scheme. It eventually got the YN3 treatment.
ROAD NUMBER SPECIFIC FEATURES:
#801
Fresh YN2 repaint with CR details.
#4591
YN2 paint with patched numbers
K5 horn
white painted roof with GPS dome.
#4590
YN3 repaint
-Spirit of Benning-
Leslie 3-chime horn
white painted roof with GPS dome.
#4600
YN3 repaint
K-5 horn
white painted roof with GPS dome.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
CV chart included in the box
HO RTR 68Ft Bulkhead Flatcar - Illinois Central #978715
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
N Scale AutoFlood III RD Coal Hopper - CEFX #600555
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
Spray Can - Clear Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
100 Ton 3-Bay Open Hopper - D&H ex Reading #9708
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
-roping eye with integral end buffers
-end slope sheets are at a steeper angle than the hopper sheets
-13 riveted side posts with the middle two panels wider than the rest
Other features include;
-Wine door locks
-Full height side ladder stiles
-Accurate molded details
-Free-rolling trucks with 36in metal wheels
-Magnetic knuckle couplers
HO F45 - DCC/Sound - Wisconsin Central #6653
WC FEATURES:
- Purchased from Santa Fe in 1995; retired in 2001
- Operated in road service with each other and other WC power
- Details remained much the same as on Santa Fe
- WC F45s were equipped with ditch lights soon after repainting. Genesis F45 tooling does not accommodate ditch lights; however, we will include two ditch light housings and LEDS in the box for modelers to install if they wish.
ROAD NUMBER SPECIFIC FEATURES:
#6653
- Large and small Firecracker antennas
- RS3L horn
#6655
- Large and small Firecracker antennas
- P-3 horn on stand
#6656
- Small firecracker antenna
- and ATSF-style antenna stands
- RS3L horn
LOCOMOTIVE FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Coupler cut levers
- Flexible rubber MU hoses
- Flexible rubber trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Fine-scale Celcon handrails for scale appearance
- Windshield wipers
- Lift rings
- Wire grab irons
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Sander lines
- McHenry scale knuckle couplers - Kadee compatible
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED bulbs for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
- Flush mounted port hole window glass
- Flexicoil-C sideframes with high brake cylinders
- Minimum radius: 18 inches
- Recommended radius: 22 inches
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
HO RTR ACF 4650 3-Bay Hopper - Sclair #46523
Date: BLT 8-72
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
RTR 30,000 Gallon Ethanol Tank Car - Archer Daniels Midland - (3 pack) #3
Detailed Information
31174, 31208, 31244
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
Leaf Flakes - Shaker 16oz - Sandstone
PM42 Breakout Board
The Accu-Lites PM42 Breakout Board is set up to accept up to two inputs and four distinct outputs. Each output can be configured with jumpers to make it a reversing section. The board comes with one set of jumpers that allows you to set that particular section to reversing, assuming the correct OpSwitches have been set inside the PM42s memory.
HO 66ft Bulkhead Flatcar - British Columbia (Dark Green) (6pk)
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
Athearn - N Scale 2 Bay 2600 Covered Hopper - Detroit, Toledo & Ironton - #11107
Flush or overhanging roof per prototype
Etched metal roofwalks
Factory installed wire roofwalk grab irons
McHenry knuckle spring couplers installed
Weighted for optimum performance
Accurately painted and printed for prototypical realism
Minimum radius: 9 3/4 "
HO GMD SD40-2 - DCC Ready - CP Rail: As Delivered #5789
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
Yellow Silt
Seal your base and add color all at once! Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Undercoat lays a base for creating dark depths to shallow shorelines, and underwater scenes for any aquatic ecosystem. Create customized colors by mixing Water Undercoat together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Tru Color Paint - Acrylic - Dull Black #82 - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO F7A EMD - DCC & Sound - Norfolk & Western/Freight #3725
NW UNITS FEATURE:
- #3725 Ex-Wabash patched unit
- Offered in 3 different schemes
- Different horns to match prototypes
- Dual Headlights
- Modified/removed side skirts
- Winterization hatch included where appropriate
- Non-Dynamic Brake
- External Cooling Coil
- Single MU Hose set on front pilot
- Unique lettering and number art per road number
LOCOMOTIVE FEATURES:
- Full cab interior
- Wire grab irons
- Coupler cut levers
- See-through cab windows
- Flexible rubber trainline hose
- Flexible rubber MU hoses
- Windshield wipers
- Lift rings
- Blomberg-B trucks
- Sander lines
- Directional constant lighting
- Headlight brightness remains constant
- Separately applied photo etched metal and injection molded detail parts
- Detailed fuel tank with fuel fillers, fuel gauges, breather pipes & retention tanks
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Accurately-painted and printed paint schemes
- McHenry scale knuckle couplers - Kadee compatible
- Fully-assembled and ready-to-run
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
- Replacement parts available
- Minimum radius: 18 inches
- Recommended radius: 22 inches
SOUND EQUPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Individual sound boards installed in both A and B units (sound units only)
- Engine, horn, and bell sounds work in DC
- Some functions are limited in DC
- All functions NMRA compatible in DCC mode
- Excellent low-speed operation
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Lighting effects such as beacons, Gyralight where prototypically accurate
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
HO G2.0 SD60M-3 Tri-Clops - DCC & Sound - BNSF #1405
BNSF FEATURES:
Ex-BN, new -wedge- logo paint
Electronic bell
Angled electrical cabinet
Road number specific features
Starting in the mid 2010s, BNSF overhauled a batch of SD60Ms. They were re-wired, rebuilt, repainted, and had remote control equipment installed in most of them. BNSF classifies these as -SD60M-3s-. In this run, we are offering two road units, and one yard service version. 1405 retains it older BN carbody with brake wheel, while 1416 and 8131 has the newer rebuilt body with electronic brake ratchet. All 3 show slightly different versions of the current BNSF scheme.
ROAD NUMBER SPECIFIC FEATURES:
#1405
Small EMD plow
-Skate- style antennas on the cab roof angles
front and rear ditch lights
brake wheel.
#1416
Small EMD plow
strobe light (effect in DCC)
front and rear ditch lights
unique front number board font
remote control decals, new BNSF style electronic brake ratchet.
#8131
No plow
strobe light (effect in DCC)
front ditch lights
-Yard service only- lettering
remote control decals, new BNSF style electronic brake ratchet.
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately ?painted and ?printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Warranty service available
Minimum radius: 18inch Recommended radius 22inch
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
Animated roller bearing caps
SOUND-EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO ATSF PS4750 Covered Hopper - Santa Fe (Delivery Gray 10-1979) #315947
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
ATSF -Delivery Gray 10-1979- is now available in the distinguished light gray paint with light blue -Santa Fe- lettering. This light gray scheme is very different from the previous Tangent ATSF offerings! The Santa Fe GA-905 class were built by Pullman Standard and leased from North American Car Corporation. Check out that sharp red/white/blue NACC badge! Featured details include prototypically accurate body-mounted brake hardware and scale-sized Miner -Selflok- outlet gates. We didnt stop there. This car is loaded with accurate Pullman-applied ATSF graphics and data. From the distinctive narrow style Roman numbers to individual North American Car Corp. car serial numbers on the center sill ? its all there.
HO SD90MAC-H Phase I - DCC & Sound - Union Pacific #8512
Detailed Information
UP FEATURES:
#8503 & #8500 represent the first renumbering, originally delivered as #8203 and #8160 respectively.
#8509, #8512, and #8520 are modeled with the starter capacitor removed and the EOT mounted further forward on the fuel tank.
Union Pacific became the only buyer of the SD90MAC-H, known to them as SD90AC, when Canadian Pacific transferred their order to the Phase 2 variant. The first 7 were considered pre-production units and wore 2-3 numbers during their lifetime. The 8500 series we are offering represents the second and third order of SD90MAC-Hs that were delivered between 1997-1999 and before their final renumbering to the 8900 series.
SD90MAC-H SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and ?printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO ACF 4600 3-Bay Centerflow Hopper - Grand Trunk #138129
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
Spray Can - Italian Red (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO AutoFlood III RD Coal Hopper - PGNX #1100
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO SD75M - DCC Ready - Santa Fe BNSF #226
Detailed Information
BNSF FEATURES:
Faded paint colors
Small EMD plow
Round deck mounted front ditch lights
Large Sinclair antenna
Early EMD trucks with hidden bearings
Road number specific details and artwork
Part of the original Santa Fe 1994 order, these SD75Ms are depicted as late in their life. Just before they were sold to PRLX, they soldered on looking beaten and battered, but still earning revenue for their owner. Renumbered to the 8200 class in the 2000s, they eventually returned back to their original Santa Fe numbers again, but with BNSF patches.
ROAD NUMBER SPECIFIC FEATURES:
#226
Ex-ATSF 226
small cab numbers
added rear number boards
yellow frame stripes
#231
Ex-ATSF 231
large cab numbers
yellow frame stripes
#249
Ex ATSF 249
large cab numbers
yellow frame stripes
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
NATO Green Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO - F150 Bed Tool Box (2 per package)
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #00056
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 60ft Gunderson Boxcar - WRWK #619
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Fully assembled and ready-to-run
- Razor sharp painting and printing
- Weighted for optimum performance
- 36 inch metal wheels with RP25 contours
- Minimum radius: 18 inches
HO GP9RM - DCC & Sound - Canadian National (Stripes) #4107
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - SOO Line #136144
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO H-6-G - DCC & Sound - Canadian National Railway (Tilted Wafer) #1373
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO - ACF 5250 CF Hopper - Glasshopper II (RNDX) #165
Frame, 8 Files, 5 Flex-Pad Sanding Sticks - Set
The complete solution for discovering all the possibilities of the Flex-I-File system. Package includes 1 Flex-I-File frame and 8 assorted tapes plus the complete grit range of Flex-Pads. All abrasives contained in this package can be used wet or dry. This kit is a perfect combination of products for the beginner or advanced model miniaturist!
Contents: 5 flex-pads (one of each grit we offer), 1 triple grit polisher, 1 anodized aluminum frame, and 8 assorted abrasive tapes
HO 50Ft PCF B70 Boxcar - w/ Youngstown Doors - SSW/Cotton Belt #66707
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
HO Concrete Block Walls - 14-1/2 x 9-1/4Ft Scale - short sections 4 each
Product Information
Molded in gray plastic, use to create warehouses, gas stations, garages and other concrete structures. Measurement is in HO Scale feet.
N Scale Curved Roadbed Track Section - 30 Degree 15 inches (381mm) Radius (4/pkg)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO - Air Horns (Unpainted Brass Casting) - Nathan 5-Chime K5h (BC Rail Diesels)
Soundbox Sound Card - U.S. Light Steam Sound Files
Card Fits Soundbox #381-221011
HO H-6-G - DCC & Sound - Canadian National Railway (Straight Wafer) #1389
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO GMD SD40-2 - DCC Ready - CP Rail: No Multimark #5670
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
N Scale Scenic Accent Figures - Hereford Cows pkg(11)
HO FM H16-44, With Sound & DCC, Canadian National: Wet Noodle Scheme No.2217
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO 40ft Corrugated LC Container - Yang Ming/Old (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered
1/8In Fluorescent Red Rod (7pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Red
HEIGHT IN INCHES
1/8In
HEIGHT IN MM
3.2mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
Odorless Enamel Thinner - 100mL
AKI odorless turpentine is very different from their white spirit. Besides being odorless, this product is softer and less aggressive than the White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
HO Class D10g 4-6-0 - DC/Silent - Canadian Pacific #922
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
HO RTR ACF 4650 3-Bay Hopper - Great Northern #171728
Date: 11-66
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
N Scale ACF 3560 Center-Flow Covered Hopper - CSX #226814
Features:
Prototypical painting and lettering
Plastic body with die cast chasis
Removable coal load
Product Information
The Atlas Trainman ACF 3560 Center-Flow Covered Hopper is based on common steel cars used by many railroads for handling potash, fertilizers, chemicals and more. It features an injection-molded body with applied plastic details where appropriate, smooth paint, crisp lettering and AccuMate(R) knuckle couplers.
Evergreen Scale Models 4067 .067in Opaque White Polystyrene O Scale Freight Car Siding (1sheet)
Mark V Gripper - Metal 5 Prong Jaw
Excellent tool for handling small parts.
Grab, lift, pull, pick and place small, difficult-to-grasp items.
Trust me, you need one!
CP #6261
Expected in February 2021
LOCOMOTIVE FEATURES:
Brand new model
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
EMD SD60M WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Rubber MU hoses for durability
All New Tooling
New HTC trucks feature animated spinning roller bearing caps
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
CP FEATURES:
Illuminated front and rear number boards
Illuminated front and rear added ditchlights
Split dynamic brake acess door
Winterization hatch
Large window nose door – high or low window position based on prototype
Large sand fill hatches on the nose
Standard nose bevel
SOO style rear knuckle brackets
#6261:
Left side forward sub base door replaced with a smooth door - no louvers
Atlas HO Scale EMD GP38, Gold Series- With ESU LokSound DCC, RJ Coleman #3804
Atlas Item #: 10003245
MODEL FEATURES:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional features included but not installed (GP-40s only)
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
SOUND & DCC FEATURES FOR GOLD SERIES:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
Prototype Overview:
In 1966 EMD introduced a new line of locomotives based on the 16-cylinder 645-series prime mover. The
40-series included a six-axle and four-axle model, the latter being the GP40. A total of 1,145 units were
produced between 1966 and 1972. These turbocharged 3,000hp locomotives were used primarily in road
freight service. The GP40 was a versatile locomotive that could be found across the US hauling drag freights
over mountain passes and leading high-speed intermodal trains across flat terrain. Three rooftop radiator fans
at the rear of the long hood differentiate a GP40 from its lower horsepower counterpart, the GP38, which has
two fans at this location.
Concurrent with GP40 production, EMD offered a lower horsepower, non-turbocharged locomotive based on the
same 645-series prime mover. The four-axle GP38 was rated at 2,000 hp and had the advantage of costing less
than the GP40. A total of 727 units were produced between 1966 and 1971 when the model was superseded.
The wheelbase of the GP38 was identical to that of the GP40. Both units shared the same EMD road-switcher
style body that was introduced with the GP35 in 1963. A desire for standardization caused the GP38 to share
the same wheelbase, frame and many external components as the GP40. The GP38 was purchased by large and
small roads alike. It was routinely found in local and road freight service throughout the US. Many GP38s and
40s are still in service today, either having been rebuilt or modified. A locomotive that has withstood the test of
time.
Many options exist on the Atlas GP38 and GP40 models. Some of these are: Long hood with or without dynamic
brakes, multiple fuel tanks, high or shoot hoods, and more.
HO ACF 5250 Covered Hopper - Hercules Pro-Fax (HPCX) #50415
Features:
Ready to run
Injection molded plastic
Fine scale detail
Etched metal roof walk
Metal knuckle couplers
Road specific hatch and outlet configurations
Road specific roof walk variations
Three body style variations
Separately applied wire grab irons and wire brake lines
Crisp painting/printing
Free-rolling 100-ton trucks
HO Value Line RTR - 13 Panel Coalporter - Conrail #503061
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO EMD SD9 - DCC & Sound - Chicago & North Western #6614
Chicago & North Western
- Rebuilt at the Oelwein Shops with chopped down nose - a first in HO Scale!
- Modified panels on side sills of locomotive
- Modified/plated over details of dynamic brake blister (Smooth plating over where grilles once were)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- Canadian National #621306
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - IWXX (Hunter Green) #220031
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Canadian Pacific Power In Color Volume 4: Modern Six-Axle Road Power - by Stephen M. Timko
RELEASED: August 1, 2023
AUTHOR: Stephen M. Timko
128 Pages, All Color
Continues the examination of the locomotive roster of this Canadian transcontinental railroad that also reaches into the depths of American soil. Coverage focuses on modern six-axle road power constructed by EMD/GMD, GE, and Montreal, as well as Progress Rail. Enjoy nearly 300 full-color photos, from the early SD40s to the big SD90Mac and SD90Mac-H locomotives!
Evergreen Scale Models 4031 0.30in Opaque White Polystyrene Clapboard Siding (1sheet)
HO Turkey & Peacock (2ea)
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX #16051
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO GP18 - DCC & Sound - Grand Trunk Western #4706
Detailed Information
GTW FEATURES:
Winterization Hatch
Beacon
Bell mounted on long hood end
Sinclair antenna
Separate, optional ACI labels
Canadian style handrails
Separate, optional spark arrestors included with model
These units were part of an 8-unit order that arrived on the GTW in February 1960. They were part of the general freight pool of locomotives and were often seen working with their GP9 predecessors.
GP18 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Accurately-painted and printed paint schemes
Body-mounted McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO Asphalt Street System - Kit - Complete Set
Product Information
Modeling HO Scale streets is a quick and easy job with Walthers Cornerstone Street System kits. This complete system of detailed plastic parts installs like sectional track; simply glue sections together and add sidewalks, curbs and other details. Street surface is easily painted and weathered to fit your era. Complete Sets (933-3138 Concrete, 933-3139 Brick and 933-3194 Asphalt) include approximately 25inch (63cm) of roadway, along with parts for one complete intersection, sidewalks, curbs, driveway and alley entrances, plus complete instructions. Additional Cornerstone HO Scale Street System. straight sections (933-3155 Concrete, 933-3156 Brick and 933-3195 Asphalt) are available separately to expand your highway system, each set includes eight straight sections.
Realistic streets
For use on any steam or diesel-era layout
Perfect for city scenes
Available in brick-cobblestone, asphalt and concrete road surfaces
Molded in appropriately colored plastic
Easy-to-build plastic kit
Complete set includes approximately 25inch (63cm) of roadway, along with parts for one complete intersection, sidewalks, curbs, driveway and alley entrances, plus complete instructions.
Rock Molds Facet Rock
Highly detailed, flexible and durable rock molds can be used to cast small boulders, rock outcroppings, top rocks for fields and creeks, or make entire rock faces by combining castings produced with these molds.
Insignia White Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
HO CPR D10 - DCC Ready - Tender w/ Wiring Harness - Black Unlettered
Both tender styles: coal and oil, can be made from this model.
GP39-2 Diesel, DCC & Sound - Delaware & Hudson #7412
ETA: October 2021
Detailed Information
DH FEATURES:
Reading style cab roof rain gutter
2900 gallon fuel tank.
Cab wind deflectors
Ratchet style hand brake.
Ditch lights on 7401 & 7407
Electrical cabinet door on engineers side
These ex-Reading units were conveyed to to D&H when Conrail was formed in 1976. They were badly needed since D&H had doubled in size. Consequently they were patched quickly. Some eventually received full D&H paint when they were rebuilt.
ROAD NUMBER SPECIFIC FEATURES:
Presented in its early D&H patched appearance
so the modeler can weather it to match the time period of their choice.
LOCOMOTIVE FEATURES:
All units are powered
Heavy die-cast frame for greater traction and more pulling power
DCC-ready features Quick Plug plug-and-play technology with both 21-pin connector (DCC-Ready only)
Factory installed SoundTraxx Tsunami2 sound and DCC decoder (DCC+sound units only)
Tsunami sounds are compatible with both DCC and DC operation (DCC+sound units only)
Genesis driveline with balanced five pole skew wound motor and dual flywheels
Directional constant lighting-featuring LEDs; headlight brightness remains constant
Scaled from prototype resources including drawings, field measurements, photographs, and more
Separately applied photo etched metal and injection molded detail parts:
Cab interior
Coupler cut levers
MU and Trainline hoses
Windshield wipers
Lift rings
Wire grab irons Sander lines
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body mounted McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Detailed Blomberg-B trucks with prototype-specific wheel bearings
Replacement parts available
Minimum radius: 18inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 decoder pre-installed
Sound units operate in both DC and DCC
Individual sound boards installed in both A and B units (sound units only)
All functions NMRA compatible in DCC mode
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Slow speed control
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Lighting effects such as beacons and Gyralight where prototypically accurate
A and B units often include sound decoders with different default pitch shift, so MU lashups sound unique
PROTOTYPE SPECIFIC INFORMATION
In the decade between 1974 and 1984, EMD produced the GP39-2 for seven North American railroads. The basic design followed most four axle road diesel switchers for the time. Borrowing improvements from the GP38-2 and GP40-2 designs, this mid-horsepower road switcher utilized a turbocharged 12-cylinder EMD 645E3 diesel engine for its prime mover. With 4 fewer cylinders, the smaller engine provided a distinctive long hood on the phase II and phase III bodies, where the clean room/engine compartment doors were set back from the cab further than predecessor locomotives.
Sensitivity to fuel economy in the 1970s justified the GP39-2 in the locomotive market. It also laid the ground work for EMD to start exploring locomotive designs that utilize engines with larger piston displacement yet possess fewer cylinders. This approach has become the foundation to modern locomotive technology.
HO 60ft Gunderson Boxcar - TBOX/Forward Thinking #663640
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Fully assembled and ready-to-run
- Razor sharp painting and printing
- Weighted for optimum performance
- 36 inch metal wheels with RP25 contours
- Minimum radius: 18 inches
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - Agawa Canyon #105
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
Built-&-Ready Landmark Structures - Emilios Italian Restaurant
Assembled - 4-1/8 x 4-15/32 x 4-7/32inches (10.4 x 11.3 x 10.7cm)
This specialty building features outdoor seating a classic menu board, stained glass arched windows looking into the restaurant and window awnings over the second floor windows. Four LED lights, two interior to light up both floors and two exterior above the entry ways, give this classy restaurant an inviting glow.
HO SW1000 Switcher - DCC & Sound - Rio Grande (D&RGW) #149
ETA: June 2023
Detailed Information
DRGW FEATURES:
Roller Bearing trucks
Sinclair antenna
Spark Arrestor
-Loop- style cut levers
Rio Grande purchased ten SW1000s in two groups, the first one in 1966 and the second group in 1968. The second group consisted of three units, numbered 147-149. They differed from the first in that they came equipped with roller bearing trucks and a slight variation in the striping on the front of the engines. This release represents the second group.
SW1000 LOCOMOTIVE NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SW1000 LOCOMOTIVE STANDARD FEATURES:
Lit ground lights
Detailed cab interior
Drop steps unless noted
MU stands
Exhaust stack
Printed numberboards
Fine scale handrails
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Cube Speaker for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Excellent low-speed operation
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Early Yellow) #475262
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
The Rapido HO Scale F7B and F9B feature:
Designed from original GMD blueprints and field measurements
The only 100% accurate GMD-built F7B and F9B locomotives – This is not a stand-in
Road-number and era-specific details applied at the factory
Steam generator or no steam generator panel as appropriate
Correct bodyside grilles as appropriate
Correct end details including unique CN steam generator end louvers
Backup light in correct location for CN or CP
Unmatched underbody details including air piping
Operational backup light (DCC)
Drive system designed for silky-smooth slow-speed operation
Metal Macdonald-Cartier Knuckle Couplers
DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings
Several road numbers per paint scheme
HO 40Ft PS-1 Boxcar - Louisville & Nashville (L&N) #6546
Built: BLT 3-52
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
HO Scale G2 SD90MAC Diesel - DCC & Sound - Indiana Railroad #9025
Detailed Information
INRD FEATURES:
Former CEFX units; major spotting featured remain
#9025 features special -warbonnet- 25th Anniversary paint
EOTD above left rear of fuel tank
Indiana Railroad has 15 SD90MACs on long term lease from CIT group. 4 of the 10 units sent to NS from CIT group came from INRD. Currently the fleet wears the attractive red & white scheme applied to most Indiana Railroad units, while #9025 wears a special -25th Anniversary- paint.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO EMD SD70ACe - ESU(R) Sound & DCC - Norfolk Southern #1060
(black, white)
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Thousands in service from 2005 to the present
- Fully assembled
- 21-pin DCC plug
- Easily handles 18 inch radius curves (22 inch or larger recommended)
- Six powered axles per unit
- Molded drill starter points for grab irons - easily added with the EMD Diesel Detail Kit (910-251, sold separately)
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
Equipped with ESU Sound for DCC and DC layouts featuring:
- 4 function outputs with brightness control by CV
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch prime mover sounds
- Compressor
- Dynamic brake
- Multiple realistic LED lighting effects
-High or low headlights per prototype
- Working front ditch lights
- Constant and directional lights
Same powerful drive as WalthersProto(R) locos featuring:
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant and directional LED lights
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
HO RTR 53Ft Jindo Container - CSX (3pkg) #1
MODEL FEATURES:
Newest vertical rib front
Easily stackable
Separately applied door closure rods
Fully assembled
Each container individually numbered
Razor sharp printing and painting
HO MP15AC - DCC & Sound - Milwaukee Road #460
LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Windshield wipers
Lift rings
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
NEW FEATURES:
Operating ditch lights (if equipped)
Operating ground lights
Newly designed motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Excellent low-speed operation
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 5820 Covered Hopper - Procor/UNPX (No Procor Logo) #123519
Era: 1988+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO SD70M - DCC Ready - Lake State Railway LSRC #6432
Detailed Information
LSRC FEATURES:
Ex-UP
Small EMD front plow
Round front deck mounted ditch lights
PTC antenna array
Late EMD trucks with exposed bearings
The Lake State Railway operates 375 miles of track and is based out of Saginaw, Michigan. They recently purchased a small batch of Ex-UP SD70Ms painted into their bright new livery. The 2 numbers we are offering were the first to be repainted and often ran together in consist.
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1752
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15452
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Spray Finishing Enamel - Gloss Black (3oz)
Spray Can - Pearl Green (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Miniature Lamps 1.5 Volt 25mA 1.2mm Diameter (20pcs)
N Scale Code 80 Long Crossing - 8 Degrees - 7-3/8 Inches (Length)
HO FGE 57Ft Mechanical Reefer - DCC Ready - SFLC #1834
Detailed Information
57Ft MECHANICAL REEFER FEATURES:
Available with onboard SoundTraxx sound
Scaled from prototype manufacturers drawings and field measurements
Repaints often vary by road number in the size and style of the reporting marks, car numbers and patch shapes
See-through protective screens on the genset end
Detroit Diesel 2-71 Genset visible inside
End wall corrugation visible inside
Inner refrigerator bulkhead
See through end platforms
Two different exhaust stack types: straight pipe with -flapper- or T-shaped -smokejack- per prototype and era
Full underframe detail including Keystone cushioning, air brake reservoir, control valve, brake cylinder, brake plumbing, and fuel tank
Factory applied end ladders and door closure rods
Trainline hoses with silver ends
Three different coupler cut lever styles per prototype
Body-mounted or truck-mounted brakes per prototype
McHenry operating scale knuckle couplers
100-ton roller bearing trucks with rotating bearing caps
Fully-assembled and ready-to-run
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Machined metal wheels with RP25 contours
Weighted for trouble-free operation
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
N Scale Built-&-Ready - Ethyls Gas & Service
Set Built-&-Ready Structures on your layout right out of the box! These hand-painted and fully-detailed buildings are great for building cities, towns and villages. They are molded with high architectural detail and include realistic weathering, signs, fixtures and accessories. Depending on the style of structures, additional features may include window treatments, printed interiors and/or lighting.
Ethyls Gas & Service is a vintage gas and service station that is loaded with charm and nostalgia. Details include old globed gas pumps, trashcans, two old metal chairs, a cola machine, an ice machine, and pallets of old junk and car parts. The fenced outdoor service area features an oil-stained concrete floor, a lift, freestanding kerosene tank, old tires, a dolly and more! See photos for footprint.
This structure comes with pre-installed LED lighting made for use with the Just Plug Lighting System.
25mA RoHS Compliant
HO Budd Slumbercoach - Amtrak (Phase 1) #2026 Loch Lomond
All new from the ground up, the Rapido Slumbercoach features:
Designed from original blueprints
Full Rapido level of underbody detail including separate pipes and conduits
Full multi-color interior detail including roomette doors
Track-powered interior lighting (operable on both DC and DCC)
Accurate GSC 41-NDO-11 trucks with disc brake detail
Etched-metal end gates
Sprung diaphragms
Rapidos renowned stainless-steel finish
Expand container traffic on your 1960s and 70s era HO layout with this series of authentic models from - SceneMaster, featuring:
- Standard end-door and right-side door versions as appropriate
- Authentic rivet, door latch and hinge details
- Colorful period schemes
- Perfect period loads for WalthersMainline G85 and 60ft Pullman-Standard VTTX container flatcars (each sold separately)
Spray Finishing Enamel - Chrome (3oz)
HO Lancaster Farmhouse - Kit
Acrylic Flat Colors - Field Blue - 3/4oz (23mL) Bottle
XF-50
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
Drill Bit #79 - 0.0145inch Diameter (2 pkg)
Product Information
Walthers Drill Bits are the right tools for all kinds of hobby projects, from detailing locomotives and cars, to scratchbuilding, wiring and more. Theres a full range of common wire gauge - jewelers drill bit sizes from number 80 to 43, and each pack includes two ready-to-use bits. Walthers miniature hardware is a complete range of ready-to-use parts and tools for hobby projects, including wood, machine and nylon insulating screws, plus appropriate hex nuts and washers, in assorted standard sizes (machine and wood screws may be brass or brass plated). Drill Bits are part of the line of Walthers miniature hardware and tools.
HO RTR 57Ft Trinity Spine Car - 3 Car Set - TTRX/Faded #361041
ETA: November 2022
Detailed Information
MODEL FEATURES:
Precision die-cast metal spine structure
Etched metal walkways
Separately applied brake piping
Fine ladder detail
Weighted for optimal performance
McHenry scale knuckle spring couplers installed
33inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Trailer hitches come separately in raised and collapsed configurations so the customer can apply them to the model to suit their preferences
Minimum radius: 20inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
Athearn N F89-F Bi-Level Auto Rack, CB&Q /BTTX #930171
Athearn ATH15032
Detailed Information
MODEL FEATURES:
Die-cast underframe
Authentic undulating safety railing
Accurate Whitehead and Kales Auto Rack
End bridge plates per prototype and era
Body mounted McHenry operating knuckle couplers
Detailed deck
Highly-detailed, injection-molded body
Minimum radius: 10in Recommended radius: 12+in
PROTOTYPE AND BACKGROUND INFO:
Introduced in the early 1960s, the Trailer Train (now TTX Company) F89F flatcar has been a mainstay of contemporary railroading. A product of Bethlehem Steel Companys (BSC) Johnstown, PA plant, over 9,000 of these (89ft 8in over the strikers) cars were built throughout the 1960s. Visually distinctive from other long flatcars of their era thanks to their C channel side sills, these versatile cars were adapted for many types of service and loadings over the years, ranging from Trailer-On-Flatcar (TOFC), to autoracks, to structural steel loading. While the majority went to Trailer Train, many were built for various railroads, typically for autorack service. Many were de-racked in later years, being reassigned and equipped for other service - TOFC, vehicle loading, pipe service, etc.
Operationally, these cars are appropriate for any layout set from the 1960s to the early 1980s. The Auto Racks would be fastened to the 89ft flatcar for auto service from Detroit.
Specifications
COUPLER STYLE: McHenry Scale Knuckle
N Scale 20ft Reefer Container - ONE (3pk)
MODEL FEATURES:
- Highly-detailed, injection-molded body
- Blister packaging for easy viewing
- Decorated models fully-assembled and ready to run out of the package
- Reefer unit to match prototype
HO 40Ft PS-1 Boxcar - ATSF (Bx57 Grand Canyon) #31740
Date: BLT 5-50
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
60Ft PS-1 Boxcar - Grand Trunk Western - Blue #383420
Beginning in the 1960s, automakers approached rail carriers with the desire for larger freight cars to transport auto parts from suppliers to manufacturing centers. In response, the 60Ft auto parts boxcar was introduced. Carrying a wide variety of auto components including engine blocks, transmissions, brake drums, and others, these cars were a fixture throughout North America for the next four decades and can still be found in service today. Often times, entire trains of auto parts and related cars could be seen near major production facilities as automakers switched to just-in-time delivery methods, requiring prompt deliveries from the railroads providing service. It was common to see trains consisting of 50Ft, 60Ft, and 86Ft boxcars, specially modified flat cars to carry lightweight chassis, and autoracks all destined for one auto or truck manufacturing facility. As the auto industry supply chains evolved and manufacturing facilities were consolidated, many of the 60Ft boxcars were used in other markets and could be found hauling a variety of goods including appliances, paper goods, cardboard, and similar items.
HO Code 110 (.110in) - 33in Ribbed Back Metal Freight Wheels (12/pkg)
Ribbed wheelsets are most commonly found on steam era rolling stock. Kadee® wheel sets are manufactured to the most exacting standards and feature: RP-25 contour, non-magnetic metal wheels and insulated needlepoint axles.
Wheelset Features:
- Accurate markings
- Incredible detail true to prototype
- Non-magnetic Metal Wheels
- Smooth tracking Free rolling Contoured Insulated Plastic Axles
- RP-25 Free rolling wheels
- Needlepoint Axles
- Axle Tip to Tip: 1.018 inch
- Freight & Passenger
HO H-6-G - DC/Silent - Canadian National Railway (Straight Wafer) #1383
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AWWX #4631
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Canadian General Transit #8051
Date: NEW 8-32
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - New Haven (Script) #30004
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Budd Baggage-Dorm - Southern Pacific #3103
Each Baggage-Dorm includes:
Realistic stainless steel finish
Track-powered interior lighting compatible with DC and DCC layouts
Full underbody detail including separate air, steam and electrical lines
Separate metal grab irons, stirrups and end gates
Accurate D22 brake equipment and piping
Super-detailed 41-NDO-11 trucks with end frames
Full, multi-color interior detail
3D CP beaver shields on CPR models - not just a printed picture!
Sprung diaphragms
Metal Macdonald-Cartier knuckle couplers
HO 50ft FMC Combo Door Boxcar - Railbox/ABOX (Late) #50078
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Weighted for optimum performance
- Minimum radius: 18 inches
- Body-mounted, McHenry operating scale knuckle couplers
- Fully assembled and ready for your layout
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
CNR Long Barrel Ore Car - Five Pack - Unpainted and Resin Cast Kit
HO RTR 48Ft Containers - Rail Bridge #2 (3pkg)
Detailed Information
MODEL FEATURES:
Fully assembled
Easily stackable
Each container is individually numbered
Goes perfectly with the Husky Stack Car
Expand container traffic on your 1960s and 70s era HO layout with this series of authentic models from - SceneMaster, featuring:
- Standard end-door and right-side door versions as appropriate
- Authentic rivet, door latch and hinge details
- Colorful period schemes
- Perfect period loads for WalthersMainline G85 and 60ft Pullman-Standard VTTX container flatcars (each sold separately)
HO GE Dash 8-40C - DCC & Sound - w/ Front & Rear Ditch Lights - Canadian National #2028
First built for Union Pacific in the late 1980s by General Electric, the DASH 8-40C diesel locomotives were identified by an enlarged exhaust stack and the mounting of the dynamic brake grids in a square-like unit behind the cab, which housed an enlarged equipment blower fan. These six-axle, 4,000 hp engines are still in service today in North America.
Features:
Ditch lights (8-40CW only)
Number boards, sand fill hatch, and marker lights where appropriate by railroad (8-40CW only)
Realistic die-cast underframe
Factory-equipped with AccuMate knuckle couplers
Coupler pocket designed to accept AccuMate Proto-couplers
Highly detailed coupler cut bars
Multiple unit hoses and trainline hoses
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Directional lighting
Painted crew members
Snowplow and piping on trucks
Recommended minimum radius: 22inch
Atlas Master Series Gold Additional Features:
ESU Sound equipped
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Maine Central - Pine Tree #801
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
Fir 4 - 6inch 10 - 15cm Tall pkg(13
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors.
W&LE #79603, #80009, #78476, #78491
MODEL FEATURES:
Wire and plastic handrails, stirrup steps, ladders and underbody details
Separately applied brake gear including brake wheel, air reservoir, and brake cylinder
Bettendorf or roller bearing trucks with 33In machined metal wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers
Painted and printed for realistic decoration
Weighted for trouble-free operation
Interior plastic blister safely holds the model for convenient storage
Window packaging for easy viewing
Fully assembled
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
The development of the hopper car went along with the development of automated handling of such commodities, with automated loading and unloading facilities.
Open hopper cars are used for commodities such as coal, which can suffer exposure with less detrimental effect. Hopper cars have been used by railways worldwide whenever automated cargo handling has been desired.
LokSound V5 DCC 21MTC Sound Decoder
Note - Email what sound file number you want installed into decoder. In the customer comments section at the check out.
ESU 58429 LokSound V5 DCC, 21MTC NEM652 (NMRA 21-pin Socket Connector) Sound Decoder
30mm x 15.5mm (1.189inch x 0.609inch)
For Gauge: HO
The LokSound V5 DCC with 21MTC fits into most HO scale locomotives.
Full Throttle Decoder Operation for Diesels
It is often challenging to make a scale model perform like it has the mass of a 260,000lb locomotive pulling 5,000 tons or more! Some of this can be done with BEMF - when the loco feels a load, it will automatically rev up to work harder to pull this actual load. But this is often a flawed method in modeling. Today, model train car wheels are so free rolling the cars often do not simulate sufficient drag to replicate a typical prototype situation. Also, often we do not sufficiently weigh our cars to represent a scaled-down version of the prototype.
One of the biggest problems with BEMF controlled load is in our modeling and operations we often simulate loads inside a closed car. The payload inside a prototype car can weigh as much as 100-tons more than the car itself. This is especially important at operating sessions. Empties in and Loads out or vice versa. There is no way for a decoder to know the proposed weight of the cars it is pulling. Our car cards, showing whether a car is loaded or empty, are seen only by the operator, not by our decoders!
To compensate for what the decoder cannot know, we have created Full Throttle decoder features! FT features include Drive Hold, Run 8, Coast, improved Dynamic Brakes and a new Independent Brake feature.
Operating Modes
The V5 decoder supports all DCC programming modes and thanks to RailCom you may read out the CV values on the main, provided you have a command station supporting RailCom. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.
The LokSound 5 decoder supports the Marklin braking sections, ZIMO HLU braking commands or the Lenz ABC system. Braking with DCC brake generators or with DC is also possible. The locomotive with a LokSound 5 decoder will also come to a halt when a Selectrix braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.
The LokSound 5 decoder is suitable for analog DC operation, AC and DCC command control.
Sound
The LokSound V5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and for all practical purposes, one cannot detect any difference to the original. A dual class D audio power amplifier with 3W output power feeds the speakers with a permitted impedance of 4 to 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.
The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail movements. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.
Functions
Subject to the type of interface, every LokSound V5 has at least 10 amplified outputs with multiple lighting functions available. The brightness of each output may be adjusted separately. Loksound 5 decoders with a PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs.
Motor control
The LokSound V5 DCC decoder supplies up to 1.5A motor current and motor control has been improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz results in silent operation, particularly for coreless motors making motor hum a thing of the past. Load control can now be adjusted with up to 10 separate CVs and will manage even the most difficult motor control issues. The unique Auto-Tune function facilitates the automatic calibration of the decoder to perfectly match the motor.
HO Ready-Made Trees - Sun-Kissed (3/pk)
4-5 inches (10.1 cm-12.7 cm)
Finely detailed, painted, flexible trunks and foliage in a variety of natural contrasts and highlights. Use combinations of types and sizes throughout your layout for superior realism. Trees have planting pin and optional detachable base for temporary placement.
HO GP50 - DCC & Sound - BNSF (Santa Fe) #3175
Detailed Information
BNSF FEATURES:
Faded paint effect
Roof-mounted A/C
ATSF style antennas and stands
Nose headlight
Forward ditch lights
Small EMD plow
Moved Leslie 3-chime horn to carbody
Correct exhaust silencer per road number
ROAD NUMBER SPECIFIC FEATURES:
#3175
Ex Santa Fe #3822
Phase I body
Blue ditch lights
Rear facing exhaust stack
Yellow anti climbers
Prime roof-mounted A/C
#3200
Ex Santa Fe #3847
Phase II body
Yellow ditch lights
Forward facing exhaust stack
Blue anti climbers
Vapor roof-mounted A/C
GP50 LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Walkway tread
Lift rings
Sander lines
Windshield wipers
McHenry scale knuckle couplers - Kadee compatible
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Whisker Scale Self-Centering Knuckle Couplers - Magne-Matic - Medium 9/32in Centerset Shank with #242 Draft Gear Boxes - 25 Pack
The #158 coupler will work anywhere a NO.5, #28, #38, #58, #118, #119 & #148 Coupler will work
This industry leading coupler features an all metal coupler head, shank, and Whisker centering spring. The #158 Magne-Matic Whisker Metal Coupler may be mounted with the #213, #232, #234, #242, #252, #262 Gearboxes (not included) or with other manufacturers cast-on coupler pockets.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CWSX #140087
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Union Pacific Flyer - Train Set
Assembly and breakdown of trains in the railway yard is tough work, but this 0-6-0 steam switcher is ready to get the job done. Assemble your consist, clear the yard and move your freight to its final destination with the Pacific Flyer! Assembly and breakdown of trains in the railway yard is tough work, but this 0-6-0 steam switcher is ready to get the job done. Assemble your consist, clear the yard and move your freight to its final destination with the Pacific Flyer! Watch the video below to see the set in action!
https://www.youtube.com/watch?v=VKMACxKMGUU
This ready-to-run train set includes:
- 0-6-0 steam locomotive and tender with operating headlight
- gondola
- box car
- offset cupola caboose
- body-mounted E-Z Mate couplers
- 36 inch circle of snap-fit E-Z Track, including 11 pieces of curved track, and 1 curved plug-in terminal rerailer
power pack and speed control
- illustrated instruction manual
HO Scale Power Meters and Window AC Units
This kit includes 8 power meter bases, 4 window AC units with laser cut window AC brackets. Supply your own 0.020ft or 0.025inch brass wire or styrene rod to fit the length needed between the meter and the weather head according to your structure needs.
HO Slab-Side Covered Hopper - Canadian Pacific (CP Script) #380438
6 Hatch
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
-Factory installed Celcon handrails
-Individually applied wire formed grab irons
-5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
-See-through cab windows
-DCC Ready 21-pin NEM plug
-LED Illuminated front and rear headlights
-Nickel plated, blackened machined wheels
-Wheels with RP25 contours operate on all popular brand of track
-Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMD’s most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
HO LH Manual Turnout 19-1/4in Radius - 9-3/4in Long
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes.
Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation.
Suitable for all types of layouts, temporary or permanent, this modular track system features an integrally molded roadbed for realistic appearance.
Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
HO Import Motors - Kit
HO Scenic Accent - Livestock (1 Goat, 2 Horses, 1 Colt, 2 Sheep, 1 Lamb)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism.
HO Trenton Works 6348 CN Boxcar - Canadian National (w/ Conspicuity Stripes) #598004
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
Kit - 4 Each of 2 Styles
Part of the Cornerstone Modern Industrial Park series - read more here!
Typical of large capacity air conditioners and air handling units used on many industries, businesses & public buildings
Perfect for modeling roof- or ground-mounted equipment
Two complete spruces with parts for eight units (four each of two styles)
N Scale Magnet Uncoupler
This style of uncoupling magnet gives great flexibility in layout placement!
HO White Freight Data - Box Car - Door Markings - Decals
Circa: 1930-40
Scale: HO Scale
Equipment Type: Boxcar - Door Markings - White
Description: Data - Freight - Box Car - Door Markings - White - Waterslide Decal - HO Scale
HO EMD SD10 - DCC & Sound - SOO Line #543
SOO Line --Conditional Announcement--
- Ex-MILW units / same features
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO 60ft Hi-Cube Plate F Boxcar - TFM #20084
Transportacion Ferroviaria de Mexico (Boxcar Red, TFM Logo)
Bring your freight car fleet up to date in minutes with the Walthers Mainline(R) 60ft Hi-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft Hi-Cube Plate F Boxcar include:
-Limited edition - one time run of these roadnumbers
-Prototypes now in service with TTX and several railroads
-Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
-Prototypically correct roof with both X and diagonal panels
-Separately applied latch bars
-Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
-100-ton roller bearing trucks
-36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO NSC 64 Ft 6000 Cubic Gondola HS - TLPX/ Triple M Metals (6 pkg) #1
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Includes Road Numbers:
2216
2221
2235
2238
2241
2268
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO Piggyback Ramps - Kit
Product Information
Piggyback Ramps like those in this easy-to-build Walthers Cornerstone HO Scale kit are used across the continent for loading and unloading trailers and other vehicles from flatcars. From the 1950s into the 1980s piggyback trailers were driven onto flatcars at yards and terminals. While this -circus-style- loading has since fallen out of favor for trailer loading, many loading ramps are still in place for special loads. They are also found at team tracks where cargo was lifted with a gantry crane. The Piggyback Ramps kit includes four ramps including a wood platform-ramp combination, a small clerks office, overhead crane and a power pole. The Piggyback Ramps kit is one of a wide variety of Cornerstone HO Scale railroad structures.
Molded in three colors and clear plastic
Builds typical 1950s-1960s era trailer loading-unloading facility
Realistic detail for freight yards and terminals
Use with WalthersMainline(R) piggyback flatcars (sold separately)
Single and double-wide Circus-style trailer ramps
Concrete and wood trackside loading Ramps
Terminal office building
Overhead gantry crane
Wood fence and power pole
Decal signs
Finished models measure:
Office: 1-3/4 X 2-1/2inch (4.4 x 6.3cm)
Wood Platform: 5-1/2 x 2inch (13.9 x 5cm)
Wood Ramp: 2-3/8 x 2inch (6 x 5cm)
Crane: 6 x 2inch (15 x 5cm)
Narrow Concrete Ramp: 5-5/8 x 1-7/16inch (14.2 x 3.6cm)
Wide Concrete Ramp: 5-5/8 x 3-5/8inch (14.2 x 9.2cm)
Small Concrete Ramp 3-1/4 x 1-1/4inch (8.2 x 3.1cm)
HO Flatcar w/Logging Crane - CP Rail #304860
(Red, black, Multimark Logo)
This Walthers Trainline HO Scale Flatcar with Logging Crane is great for adding to any freight train on your layout or train set. Trainline freight cars feature RP-25 metal wheels for superior performance on all kinds of track including smaller scale-sized Code 70 and larger rail. With their added weight, body-mounted knuckle couplers, and wheel tread matched to National Model Railroad Association standards, wheels on Trainline rolling stock are compatible with almost all North American HO model railroads and can be used as you expand your railroad. Other features of this Flatcar with Logging Crane include molded details that stand up to handling during operation and realistic paint schemes for good looks.
-Fully assembled, ready to run
-Perfect for use with Trainline Log Dump Cars
-Colorful paint and lettering schemes
-Fully assembled, ready to run
-Use with any HO Scale train set
-Body-mounted magnetic knuckle couplers
-RP-25 metal wheels
HO - Airhorn (Unpainted Brass Casting) - Nathan P3 (2 Bells Forward, 1 Bell Back)
NMRA 8-Pin Plugs pkg(10)
HO SD60M Wide Cab Diesel - DCC & Sound - CSX #8783
Expected in May 2022
Detailed Information
CSX FEATURES:
-YN3- Scheme
Ex-CR
Small EMD plow
Front ditch lights
CSX-style GPS dome
K-5 horn
After the CR split in 1999, CSX acquired 30 ex-CR SD60Ms. Around 2007, they were repainted into CSXs more simplified -YN3- scheme while retaining most of the CR-specific details. They operated until 2017 when their lease expired and they were sold off to a leasing company.
LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully-assembled and ready-to-run
Replacement parts available
Minimum radius: 18inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
GLa 2-Bay Hopper: Cambria & Indiana - 6(pkg)
Features:
All-new tooling
Scaled from original blueprints
Die cast frame and floor for optimum weight
Full interior rivet and bracing details
Factory installed wire grab irons
K- or AB-brake gear installed as appropriate
Factory installed Kadee #158 couplers in narrow draft gear box
Turned metal wheels in correct PRR 12D-F8 trucks
Accurate paint and lettering
Multiple road numbers available for each paint scheme and railroad
Detail Variations:
As operated from the 1930s to the 1950s
6-pack includes the following numbers, all individually packaged:
#1501
#1523
#1579
#1692
#2005
#2021
Spray Can - Pearl Clear (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Canadian Pacific 36320 Stacked Block
Trucks And Couplers Micro-Trains
Body-mounted couplers
Kit (green) pkg(3)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .100In x 14In (4 pcs pkg)
HO SD70ACU - DCC Ready - Canadian Pacific (Military Scheme) #7023
ETA: October 2023
Detailed Information:
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military commemorative paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system. CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in temperate climates. CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
AK Interactive Dark Mud -matt dark mud wash
HO ACF Type 27/ICC-105 6,000-Gallon Tank Car - Columbia Southern #686
Considered one of the most common early tank car designs, American Car & Foundry (ACF) Type 27 tank cars were built from the late 1920s through the 1940s. These specialized cars were almost always privately owned for revenue service because railroads only used and maintained a few for non-revenue activities like fuel.
These insulated high pressure cars were used often in the transport of the home heating fuels propane and butane as well as anhydrous ammonia, chlorine, and methyl chloride.
FEATURES:
- Beautifully Detailed and Accurately Modeled
- Precision Paint, Color, and Lettering Schemes
- Many Separately Applied Details including Hand Rails, ladders, brake wheel, roof walkway
- Detailed Underbody
- Composition: ABS body, Diecast Chassis
- Wheel Composition: Metal
- Couplers: (2) Operating Kadee Compatible
- Compatible Tracks: Code 83 and 100 Rail
- Minimum Operating Radius: 18 in
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
N Budd RDC-1 (Ph 2) - DC/DCC/Sound - VIA Rail (Early)
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height
HO 1958 Cu Ft 2 Bay Covered Hopper - Open sides
Polybor-Chlorate NAHX #30518
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
N Scale 2022 Micro-Mouse Christmas Boxcar
Micro-Mouse and family partake in a joyous Christmas tradition of displaying their all-time favorite train-themed ugly sweaters for the 2022 Christmas photo. Merry Christmas!
HO GMD SD40-2W - DC/DCC Ready - Canadian National (Sergeant Stripes) #5327
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
HO Scenic Accent Figures - Pedestrians Going Places (6 pkg)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism.
HO 60ft Bulkhead Flatcar - CP Rail (3pk)
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
HO RTR 68Ft Railgon Gondola - BNSF #518571
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO NSC 5304 Boxcar - Canadian National (Delivery w/ Green Door) #557466
The Rapido NSC 5304 cu.ft. CN Combo Door Boxcar features:
Separate grab irons installed at the factory
100-ton Barber S-2 trucks, with metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe
HO Scale Metallic Back Colored Traffic Signs - 12pkg
This is a package containing 12 posts and assorted signs. The signs are metallic colored on the back just like prototypical signs on the road today. Printed on high quality paper. NOTE: Carefully cut the individual signs from the sheet and use canopy glue to attach them to the posts.
N Scale 36ft Wide-Vision Caboose - MKT #271
The Wide-Vision Caboose (also known as Extended-Vision Caboose) was designed with a wider cupola projecting from its sides. After World War II, train cars began to be taller and wider than their predecessors. The extended cupola assisted the trains crew in seeing beyond both the tops and sides of the train cars ahead. This caboose design saw service on most U.S. Railroads. Bachmanns Wide-Vision Cabooses are fully assembled and come in a variety of colors and road names.
Features include:
- highly detailed painted bodies with precision graphics
- blackened machined metal wheels with RP25 contours
- magnetically operated, body-mounted E-Z Mate Mark II couplers
- non-magnetic blackened brass axles with needle-point bearings
- Celcon trucks
- added weight for optimum tracking performance
SoundBytes Crossing Bell
(Western-Cullen-Hayes 777 (Electronic)
The SoundBytes Crossing Bell is a simple, fully self-contained sound module that plays a grade crossing bell sound.
FEATURES:
- Prototypical crossing bell sound
- Integrated speaker & volume control
- Easy to install and use
- Ideal for adding sound to grade crossings
- Powered from 5 to 24VDC
Note: Please do not use old model railroad power packs as a DC supply. These often produce large output spikes far in excess of their nameplate voltage ratings, are not suitable for powering modern electronics, and will damage SoundBytes modules.
Operation:
The SoundBytes module needs 5-24 volts of clean direct current (DC) power to operate. Connect the white wire to GND to activate the sound. Leave the white wire disconnected to turn the sound off.
Red Wire = 5V to 24V
Black Wire = GND
White Wire = GND to activate
The volume can be adjusted by using a small screwdriver to turn the white, square potentiometer on the PCB.
Specifications
1.25(L) x 1.25(W) x 1.25(H) inches
HO 40Ft High Cube Outside Braced Boxcar - Southern Pacific #659110
HO SD70M - DCC & Sound - Union Pacific #4477
UP FEATURES:
UP lightning stripe scheme
Early SD70M body
Nathan K-3 horn
Air Dryer
Spare knuckles on rear pilot
Prime air filters
HTCR-II trucks
EMD low plow
Red sill stripe
GPS dome
Small can & Sinclair antennas
-Under Warranty- on cab
Late style fuel tank & breather piping
This release of UP SD70Ms depicts units from the first order, with early (non-flared) SD70M bodies in their as-built appearance. For later-era operations, a consumer-applied GPS dome is included.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO MLW M420 - DCC & Sound - British Columbia (Lightning Stripe) #643
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO 7in Green Jewels (12/pkg)
JUNECO B-17 - 7inch JEWELS - GREEN - PACKAGE OF 12. HO SCALE - BUT CAN BE USED IN OTHER SCALES - MEASURES 0.080inch
HO ALCo RS-3, Phase 3 - DCC/Sound - Burlington Northern #4082
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- fuel tank
- can motor
- flywheels
- blackened wheels with RP25 flanges and knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound V5 decoder
Tru Color Paint 107 - Acrylic -SP Daylight orange 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO F89-F Bi-Level Auto Rack - New York Central/BTTX #913213
Detailed Information
MODEL FEATURES:
Die-cast underframe
Authentic undulating safety railing
Accurate Whitehead and Kales Auto Rack
Early or late train lines and cut levers per prototype and era
Customer installed end bridge plates (included in box where applicable)
Detailed deck
Wire-formed brake plumbing
Separately applied hand brake per prototype
Separately applied wire grab irons where applicable
Prototypical ride height
70-Ton roller bearing trucks with animated rotating bearing caps installed
Trucks with animated rotating bearing caps
Minimum radius: 22inch - Recommended radius: 24+inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
HO GP40 - Gold DCC & Sound - CSX (Bright Future) #6604
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
N Scale Flexible Roadway - Gray Country Road (100 x 2.9 cm)
(divided into 2 rolls)
Pre-colored, self-adhesive material in a variety of authentic colors and surfaces to create custom roads.
Approx. 3-1/4 feet long.
HO NSC 60ft Ingot Flat Car - Data Only
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
Wood Shack
The bright green door is a little rugged now and the wood paneled walls could use a good wash, but it is still as secure as the day it was built.
Building includes a raised foundation with two staggered steps up to a padlocked door, asphalt shingles, and two barrels once used for collecting rain water.
Exterior details are unattached for customized placement or addition to other structures. Add Shacks along the track or behind factories, businesses, and homes to create even more realistic detail.
HO Locomotive Stripes and Strips - White (CP/NS)
Reflective white striping for locomotive frame sills. Includes 150 linear inches of scale 4 inch stripes in easy-to-handle 5 inch long segments. Sheet also includes 3 inch stripes and 200/each scale 4x18 inch reflective strips, perfect for certain locomotives and those rare freight cars utilizing white, as permitted by FRA 224.
HO 53Ft Gunderson Husky-Stack Well Car & Containers - TTX (Patched Logo) #646851
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
All Scale Bright Boy Abrasive Track Cleaner - Standard Grit
Improve the conductivity of your tracks by keeping them clean with easy-to-use Walthers Bright Boy.
This rubber-based abrasive is also great for taking grime off metal loco, freight, or passenger car wheels too!
Evergreen Scale Models 4101 .100in Opaque White Polystyrene Clapboard Siding (1sheet)
HO Hyundai 48ft Exterior Post - NACS (2pk)
Road #200400, #283130
PROTOTYPE TYPE:
48ft Exterior Post containers were introduced in 1986 and were a common site on nearly all double stack container trains of the later 80s, 90s, and 2000s. These containers were used for domestic freight service and were purchased by numerous railroads and freight operators in large numbers. These containers were a unique design in which the front and side container panels were supported by aluminum channel posts mounted outside of the container box to provide additional capacity space for larger pallet stacks within the container interior. The posts are a simple spotting feature for these styles of containers. Hyundai was one of a handful of manufacturers of exterior post containers, and while nearly-identical in design to one of their competitors, the additional drainage channel on the top of the container at the head end, and full-height end corner posts differentiate this container from its competitors design. Some of these containers served secondary lives for more than one operator, leading to some interesting graphic combinations over their lifespans. Changes to over-the-road length allowances for 53ft containers and trailers brought about the eventual demise of the 48ft container and a majority of them were withdrawn from service during the mid-2000s and beyond, though limited numbers still remain in service today.
FEATURES:
Hyundai Roof Configuration Version:
A unique feature of the Hyundai design was the additional water drainage channel near the front end of the container and the forward vertical framing members that extended the full height of the container. We have modeled the detail that differentiates this container from those of other manufacturers of 48ft exterior post containers.
Sharp And Accurate Paint And Lettering:
Classonemodelworks.com provides accurate paint and lettering taken from photographs of the prototype, and numbering that matches the class numbers for each operator or railroad. Our containers come with the exterior posts already painted to match the aluminum color of the prototype containers and galvanized coloring for the upper and lower structural channels.
Accurately Dimensioned:
These containers have been accurately reproduced from hand-measured field dimensions of the actual containers, right down to every visible detail. Classonemodelorks.com stands for accuracy and we strive to provide that with every model we produce.
Accurate scale Door latching Details:
Classonemodelworks.com believes in providing models that accurately depict the prototype equipment. Keeping that as our core, we are proud to provide highly-detailed cast door locking bars, latching mechanisms, door bumpers and angled bar lifter.
Shrink Tube Assortment (4pcs)
This assortment includes 6 inches each of 1/16, 3/32, 1/8, and 1/4 inch diameter tubing for insulating solder connections.
N Scale AutoFlood III RD Coal Hopper - UP/CMO #504337
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
N Budd RDC-1 (Ph 1) - DC/DCC/Sound - Painted, Unlettered
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height
N Scale EMD SD70ACe - Paragon4 Sound/DC/DCC - UP (Missouri Pacific Heritage Livery) #1982
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up (except for rubber traction tire)
- ABS Plastic Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, and Cut Levers
- Prototypical Light Operation with Separately Controllable Headlight, Rear Light, Cab Light, and Front Ditch Lights
- Prototypically Accurate Sounds for an EMD SD70ACe Locomotive
- Microtrains-compatible Couplers (2)
- Will Operate on Code 55, Code 70, and Code 80 Rail
- Minimum Operating Radius: 9.75 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
Flat Brushable Acrylic - Pullman Green - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
HO Greenville 86Ft Double Plug Door Box Car - Conrail (Delivery 4-1978) #297805
- Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
- CNC-Machined 36 Inch Wheels
Conrail (CR) Delivery 1978 shows off the timeless CR boxcar freight scheme, and the car class that served the longest! While Conrail did absorb numerous predecessor series of 86ft Auto Parts Boxcars from Greenville, Thrall, Pullman and SRS, there was only ONE group of cars ordered and delivered new to Conrail. This 1978 Greenville order is significant, numbering 312 cars. The Tangent replica duplicates all of the delivery lettering exactly as applied by Greenville, from the big Conrail logo down to the 2 inch data and stencil marks. No generic CR data or fonts here ? this is hand-drawn from exact photos. The CR cars feature accurate body-mounted brake gear with all those visible rods and assemblies hanging below the car side just like they should. Did you notice the third arm mechanisms at the top of each door? We did, too ? they are accurate and appropriate for this car, as-built. SKUs -01 through -03 feature April 1978 data, and SKUs -04 through -12 feature May 1978 data. This is a big series of cars and they are ready to haul auto parts on your layout.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX(6 pkg) #6
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
16095
16104
16118
16129
16135
16153
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Micro Engineering HO Scale Flex-Trak Code 70 Non-Weathered 6 pcs, 18 ft
Flex-Trak features scale size ties, tie plates and spikes, irregular tie spacing, natural brown tie color and nickel-silver rail.
HO Thrall 5-Unit Rebuilt 40ft Well Car - BNSF #238223 (A-E)
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40ft Well Cars! As the 53ft container quickly became the standard for domestic shipping, older well cars built to carry 48ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40ft on both single and five-unit cars. Today they can be seen carrying 20ft and 40ft containers in the well, with 40ft and 53ft units on top. Fully assembled and ready for service, the models feature:
- One time run of these roadnumbers - limited quantity, order now!
- 100- and 70-ton roller bearing trucks
- Correct 36 inch and 33 inch RP-25 turned metal wheelsets
- Heavy die-cast metal frame for superb performance empty or loaded
- Finely molded 3-D brake rods with chains, brake piping and weld lines on body
- Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
- Proto MAX(TM) metal knuckle couplers
PRR X31A Single-Door Boxcar: Shadow Keystone, Early - Single Car #76642
(1954-1957)
Detail Variations:
As operated between 1954 ad 1967.
6-pack includes the following numbers:
#67812
#68283
#69324
#70157
#70246
#76642
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
Code 83 - 19 Degree Crossing
Tru Color Paint Acrylic - BNSF Railway Intermodal Brown 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO GE AC4400CW - DCC & Sound - Kansas City Southern KCS #2020
Detailed Information
KCS FEATURES:
As-delivered appearance
Large plow
High mount number boards
Walkway mounted ditch lights
Mid production units
5-chime horn
GE style self-steering trucks
KCS, being a long-time customer of EMD locomotives, turned to GE in late 1999 for 50 AC4400 units. They were factory painted in their then-current grey scheme. By 2006, they were renumbered to the 4575 series. KCS started to repaint them into their -Southern Belle- scheme in 2013.
AC4400CW SERIES LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
5-1/2in Long, Cut #2 Needle File - Half-Round, Carded File (1pc)
101 More Track Plans for Model Railroaders
Featuring plans from Model Railroader magazine from three decades, each of the 101 track plans has a newly written, informational description of the design. The track plans range in size from simple 4 x 8 foot and smaller layouts to room- and garage-sized showpieces, with the majority focusing on mid-size layouts.
HO EMD SD10 - DC/Silent - Dakota, Minnesota & Eastern #548
Dakota Minnesota & Eastern --Conditional Announcement-
- Ex-SOO, nee-MILW units - same features
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO 26Ft Can-Car Dry-Van Trailer - Canada Cartage #8H0394
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
Surface Primer for Plastic & Metal (White) 180ml
This white surface primer is an invaluable tool, the undercoat it provides being perfect for areas to be painted with a light colored topcoat. It will help give your model a smooth, lustrous surface.
HO SD70M - DCC & Sound - PRLX ex CSX #4681
Detailed Information
CSX & PRLX FEATURES:
CSX units are former EMD demonstrators. In a roster increasingly dominated by GE, a group of these venerable units have been sold to Progress rail, returning the units to lease service once again.
Early Cab with nose window
Customer-installed GPS dome included in box
K5LA horn
Spare knuckles on rear pilot
Appropriately-colored MU cables
Early 5000 gallon fuel tank
Large or small snowplow per prototype
Illuminated front ditch lights; flash when horn is activated on DCC and Sound Version
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO GP40-2L Diesel - DCC & Sound - Indiana Harbor Belt #4020
IHB FEATURES:
- Painted over class lights
- Long hood-mounted horn
- Cab-mounted bell
- Removed plow
- Sinclair antenna
- 3600 Gallon fuel tank
ROAD NUMBER SPECIFIC FEATURES:
#4020
- Dual rear headlight
- square EMD ditch lights
- modified truck side frames
#4021
- Single rear headlight
- square EMD ditch lights
#4022
- Single rear headlight
- small round ditch lights
GP40-2 LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18 inches
SOUND-EQUPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO EMD GP9 Phase II - DCC & Sound - Undecorated
Loksound 5 sound
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today. Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21mtc connector
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
A great starting point for a custom-build, features of this model include:
Dynamic w/48inch fan and nondynamic long hoods
Single fuel filler on sill
Drop steps
Footboards
8 styles of MU stands and receptacles
MU hose clusters front and rear
Ratchet- and Peacock-style handbrakes
Steam generator and piping
Pyle (early and late) and Mars dual-sealed beam headlights
See-through 36inch and 48inch fans w/separate blades
Roof-mounted air tanks and piping (-torpedo tubes-)
Rounded and Square winterization hatches
Harco, C&O, Super lifting and non-lifting and N&W-style spark arrestors
Folded-style cab window deflectors
Canvas and metal sunshades
Two all-weather cab windows
Blomberg Type B sideframes w/separate swing hangers and brake cylinders
Roller bearing, sloped, square and plain bearings
Separate speed recorder and Automatic Train Stop (ATS) shoe
Two styles of fuel tanks; 1200/600-gallon fuel and water and 1600-gallon
RTR 60Ft Gunderson DD Hi-Cube Box - TFM #2006
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO AutoFlood III RD Coal Hopper - GLFX #8017
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Model Wash - Dark Yellow - 35ml Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Dark Yellow is recommended for yellow models and light colors. Also very suitable for all camouflages and natural scenes with vegetation, rivers and lakes.
N Scale Small Parts Packet - 58pcs
Description
Replace small parts packed. Spare parts for 1023 & 1025 couplers. Package contains 3 draft gear boxes & lids, 12 coupler centering springs, 12 truck restraining springs, 3 coupler shanks, 6 00-9- x .187 screws, 6 00-0090 x .112 screws, 3 bolster pins, 1 coupler instruction sheet, 12 coupler trip pins.
5/16 inch OD Round Brass Tube - 0.029inch Thick x 12inch Long
Round Brass Tube (1 pc)
Outside Diameter: 5/16 inch
HO Metal Building Extension Kit - Green
Pikestuff Extension Kit (Green) Extends the length of most Pikestuff Kits. The walls are 20 scale feet wide (2-3/4 inches) by 23 scale feet tall (3-11/64 inches). Includes: two walls molded in color, plus white roofs and concrete foundation and glue strips.
HO B-50-15 Boxcar - As Built w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #37378
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
HO GE Dash 9-44CW - DCC & Sound - Canadian National CN #2510
CN FEATURES:
Canadian 4-window cab with high-mounted number boards
K3 horn
Front ditch lights
Front class lights
Rear single style headlight
Cab-mounted brass bell
Canadian National purchased 23 safety cab Dash 9 locomotives from GE in late 1994. Classed as -C44-9WL-, these locomotives were seen all over the system and featured a 4-window Canadian style cab, front and rear anticlimbers, and single rear headlight.
ROAD NUMBER SPECIFIC FEATURES:
#2506 Later appearance with right side yellow number board numbers and missing left side -American Continent- map art
#2510 As-delivered appearance
#2522 As-delivered appearance
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO MLW FPA-2u & FPB-2u - DCC/Sound - CNR - (1954 Scheme) #6759 & 6859
The entire FPA-2u and FPB-2u production is a CONDITIONAL RELEASE. If Rapido receives enough pre-orders by the order deadline, then production will proceed! If not, then they will never tool these models, and your deposit will be credited back to you.
The Rapido FPA-2u and FPB-2u models feature:
- The only HO scale MLW FPA-2u and FPB-2u units ever. Full stop. End quote.
- Operating headlights, class lights and back-up lights
- Canadian-cast Dofasco Type B trucks
- Full underbody piping and conduit
- Separate grab irons and handrails
- Correct MLW-specific large-capacity fuel tanks
- Heavy, die-cast chassis
- Rapidos improved 5-pole motor with dual flywheels
- Full, multi-color interior
- DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
- Accurate sounds recorded from the REAL FPA-2u #6758
- Improved light grey color on the CN 1961 scheme
53Ft Railgon Gondola - Ready To Run - Railgon GONX #310209
(as-built; black, yellow)
Product Information
A must-have model for any HO layout from the 1980s to the present, the WalthersMainline 53Ft Railgon Gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53Ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America. A great addition to your HO freight car fleet, the models feature:
Based on Railgon 310000 series cars
Used in nationwide pool service from 1980 to the present - many later leased and relettered by new operators
Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
100-ton roller-bearing trucks
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Portec 3000 Covered Hopper - Midwest Railcar (MCEX) - #330241
Features:
- Ready to run
- Injection molded plastic
- Fine scale detail with many separately applied parts
- 2 Body and roofwalk variations to accurately match the prototype
- 2 styles of vibrator brackets
- Highly detailed end cages and brake gear
- 100 Ton Trucks
- Metal Couplers
- Etched metal roofwalks and end platforms
- Crisp painting and printing
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15201
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
N Scale 3-Dome Tank Car - Kanotex #879
These specialized cars were actually three complete tanks riding on one frame. They could be used to ship different types of petroleum products, such as gasoline, kerosene and home heating oil, or different grades of gasoline such as regular, super and premium to smaller customers from the 1920s to the 60s.
Colorful and completely assembled, the models feature body-mounted EZ-Mate II knuckle couplers.
HO scale CIMC 53Ft Cargo Container Marten Set #1
53Ft CIMC Features:
-Side corrugations with an 8-55-8 arrangement
-Front wall with 10 vertical corrugations
-Roof with 6-54-6 corrugations
-1-3-1 beveled doors
-Placard Holders on front wall, sides and door
HO & N Scale TSU-N18 Tsunami2 Sound Decoder for Electric Locomotives
Dimensions: 25 x 10.5 x 4.1mm
Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output)
Function Outputs: 6
Audio Amplifier: 1 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
BIG sound in a small package! The small size of our new Tsunami2 TSU-N18 decoder makes it ideal for both N and small HO models that come equipped with a NEXT18 socket. Installations can not get any easier. Simply plug this decoder in and enjoy all of the Tsunami2 features you know and love!
You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive dynamic digital exhaust, functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. Soundtraxx also offers a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12 in each diesel version), whistles (90), airhorns (40+), couplers, dynamos and more!
The TSU-N18 can be wired to a CurrentKeeper to maintain performance over dirty track and switches.
HO 60ft Hi-Cube Plate F Boxcar - Canadian National #794142
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
Medium Rust Deposits
The perfect product to recreate a rust texture in a light rust color in surfaces of vehicles or accessories. Once they are dry, they have the same scale appearance as real crusted rust. The finish is extremely authentic and can be combined with other tones for more realism.
HO Pre-Blackened Brass Chain - 12 Inches - 40 Links Per Inch
A-Line Chain is great for detailing all kinds of models in all scales. Available in a variety of sizes measured as links per inch, chain is also available in multiple kinds of metals.
HO NSC 64 Ft 6000 Cubic Gondola HS - IMRX #2283
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO TraxSide 2000s Semi Tractor/Trailer Set - Northtech Chemical
(blue, white)
This tractor/trailer set features a die cast metal body, interior seats, window glazing and authentic decoration. Its perfect for adding realism to your late-steam, transition and early diesel-era scenes.
HO Valley Growers Association Steel Grain Elevator - Kit
DIMENSIONS
Elevator: 4-3/8 x 6-1/2 x 11 inches (11 x 16 x 28.5cm)
Ramp: 5-1/2 x 2-1/2 x 1/2 inches (14 x 6.2 x 1.2cm)
Office: 2-3/4 x 1-1/2 x 1-1/2 inches (7 x.3.8 x 3.8cm)
Bin: 7-1/4 x 4-1/8 x 4-1/4 inches (19 x 10.5 x 10.5cm)
Rural grain elevators like the prototypes for the Walthers Cornerstone Valley Growers Association were somehow more than just a trackside industry. The elevator was, and in some place still is, the center of many rural communities. And in a few places it WAS the community. Handling grain from local farms and selling it to distant markets, many of these older buildings are still active today as stand-alone facilities or as part of larger grain and feed mill complexes that sprouted up around them. Steel elevators came into use in the 1920s as steel sheets became affordable. In fact, many wooden elevators were sheathed in steel for fire resistance. With its colorful signs and period styling, this corrugated-metal elevator is perfect for your layout and your favorite era from the 1920s to today. The kit includes the main elevator, plus a wood storage bin and wooden office, all with realistic wall textures. Separate doors and windows add to the realism, along with colorful decals for several grain companies. If your steam or diesel-era railroad hauls grain then you need the Valley Growers Association grain elevator along your line.
- Realistic corrugated-metal construction
- Includes elevator, office and trackside storage bin
- Use with other Walthers Cornerstone grain handling structures
- Easy-to-build plastic kit
- Molded in appropriate colors
HO Diesel Sanding Tower - Kit
A must-have for engine terminals large or small, the Cornerstone Diesel Sanding Tower fits HO layouts from the 1950s to the present day and features:
- Newly-tooled model!
- Prototypes designed especially for servicing diesels
- In service from late 1950s to the present day
- Typical of towers used at major engine facilities and short line terminals
- Detailed safety cage ladder and supply piping
- Four outlet hoses
- Looks great alongside the Cornerstone Early Diesel Fueling Facility (933-2908, sold separately) and other - engine terminal structures
- Molded in light gray
Measures:
- 25/32 inch Wide
- 5-7/32 inches Long
- 7 inches Tall
- Track Centers 2-3/4 inches - 20 scale feet