Tru Color Paint 020 - Acrylic - Santa Fe Blue - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
Raised Plate ACI Placards -8pkg
In 1967 the rail industry introduced a nationwide system to track freight cars as they moved across the railroad network. The visual result of this technology was the application of ACI labels to the side of freight cars. These labels – or placards – were required on all freight cars from 1968 to ~1979, although the labels lasted far longer than that and can still be seen today. These finely-executed placards allow you to reproduce this detail on your freight car fleet, and include correct dimensions
N Scale Class X65 50Ft Boxcar - New York Central #78700
Painted Jade Green with black, red and white printing. Lot 976-B cars were built without roofwalks, while Lot 115-B cars had their roofwalks removed in the late 1960s. Car class and loaders type are specified below. Made in China. Roadname and heralds used with the permission of and licensed by CSX Corporation.
Lot 976-B
DFB loaders
These 50ft exterior-post boxcars were built from 1966 through 1969 by Despatch Shops Incorporated, a subsidiary of first the New York Central and then Penn Central. A number of cars also were built for the Pittsburgh & Lake Erie as well as the Lehigh Valley. Conrail inherited the New York Central, Penn Central and Lehigh Valley rosters in 1976. The cars remained active into the 1990s
The body and underframe are injection molded plastic, with etched brass end platforms. Intricate and accurate detail is present throughout. The model rides at the prototypically-correct height above the rails, on ASF 70-ton Ride Control roller-bearing trucks fitted with low-profile metal wheelsets, lowered brake gear and ladders, and Keystone cushioned underframe. Simulated cushioned-underframe coupler pockets are integrated into the underframe. The model is equipped with Micro-Trains compatible knuckle couplers, and represents the prototype in the non-roofwalk configuration.
Operation of this model over curved trackage of less than 10-inch radius is not recommended.
HO NSC Ballast Hopper - Herzog (Early) #6335
1977+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
RTR 57Ft trinity 3-unit Spine Car - TTRX/Faded Logo #360909
Expected time of arrival : April 2021
Primed for Grime
MODEL FEATURES:
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Precision die-cast metal spine structure
Etched metal walkways
Separately applied brake piping
Highly detailed customer applied trailer hitches
53Ft trailer and container are perfect loads for the 57Ft spine car
Fine ladder detail
Weighted for optimal performance
33Inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers installed
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Machined metal wheels
Minimum radius: 20Inch
PROTOTYPE AND BACKGROUND INFO:
Intermodal transportation requires specialized rail equipment which is, on occasion, too specialized. To allow more flexibility in loading containers and trailers at terminals all-purpose spine cars were developed. These cars can be configured to allow loading of trailers of varying lengths, from 28Ft pups to 53Ft high capacity units. With the trailer hitches collapsed containers can also be loaded. 40Ft, 45Ft 48Ft and 53Ft containers call all be accommodated on these cars as well as 20Ft models provided they are mounted to a chassis.
The prototype for our model is based on a Trinity-built car owned by the TTX Company. These 70-ton cars (TTX class RAF30A) numbered TTRX 360817-361116 first appeared on the rails in the late 1990s. The Athearn model is faithful to the prototype allowing modelers to load a variety of trailers and containers.
Specifications
PROTOTYPE MANUFACTURER: Trinity
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990s+
HO 60ft Hi-Cube Plate F Boxcar - Union Pacific #354969
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
Plastruct 90201 ABS 1/8 Square Tube (7pcs pkg)
Specifications :
Height: 1/8 (3.2mm)
Width: 1/8(3.2mm)
Inner Diameter: .050 (1.3mm)
Wall: .037 (0.9mm)
Length: 15
Spray Can - Clear Orange (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
N Scenic Accent Figures - Dock Workers (6/pkg)
Woodland Scenics N Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and hand painted for extra realism.
Evergreen Scale Models - Opaque White Polystyrene Rectangular Tubing .188In x .312In x 14In (2 pcs pkg)
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
N Scale Concrete Tie Double Viaduct Track Super Elevated Curve - R414/381mm-45 degrees (2pcs)
(15inch - 16 3/8inch) WR414/381-45VS
All Scale - Shelf Rocks - Ready Rocks - 6 Pieces
Precast plaster and hand-painted. Each rock is unique. Shelf Ready Rocks are cast to nest side-by-side and top-to-bottom. Use separately or to create a large wall. 6 rocks. 7 to 7-1/2inch
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Southern Pacific #33047
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 40Ft Fruehauf Exterior-Post Volume Van - Silver/Unlettered
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
N Scale Curved Single Track Viaduct - R315-45V (R 12 3/8inch-45) - 2pkg
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated.
Theres no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and youre ready to go.
HO F30A MOW Camp Trailer: Painted, Unlettered Sleeper Trailer
This trailer does not come with a flatcar
Trim Film - Box Car Red - FS 10076 4.5 in x 7.5 inch sheet - Waterslide Decal
HO Trinity 3-Bay Hopper - NS #294188
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Whisker Metal Couplers w/Gearboxes - Medium (9/32in) Centerset Shank (2pair)
The #148 Whisker Metal Coupler will work anywhere a #5 coupler will work and is a direct replacement for most Bachmann On30 couplers & a direct replacement for most plastic Medium Centerset clone couplers.
This industry leading coupler features an all metal coupler head, shank, and Whisker centering spring and comes complete with insulated draft gearbox and lid. The #148 Magne-Matic Whisker Metal Coupler may be mounted with the included #242 Snap-Together Gearbox or with other manufacturers cast-on coupler pockets.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #28 coupler.
Package Includes:
(2) Pair #148 Whisker Metal Couplers - Medium Centerset Shank
(2) Pair #242 Snap-Together Gearboxes
(2) #622 Knuckle Springs
Plastruct 90081 ABS TEE 3/64 (10 pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/64
HEIGHT IN MM
1.2mm
WIDTH IN INCHES
3/64
WIDTH IN MM
1.2mm
THICKNESS IN INCHES
.015
THICKNESSS IN MM
0.4mm
LENGTH IN INCHES
10
LENGTH IN MM
250mm
USE DESCRIPTION
ABS TEE Use for bracing in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is
Flat Aluminum Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO Greenville 86Ft Double Plug Door Box Car - Conrail (Delivery 4-1978) #297805
- Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
- CNC-Machined 36 Inch Wheels
Conrail (CR) Delivery 1978 shows off the timeless CR boxcar freight scheme, and the car class that served the longest! While Conrail did absorb numerous predecessor series of 86ft Auto Parts Boxcars from Greenville, Thrall, Pullman and SRS, there was only ONE group of cars ordered and delivered new to Conrail. This 1978 Greenville order is significant, numbering 312 cars. The Tangent replica duplicates all of the delivery lettering exactly as applied by Greenville, from the big Conrail logo down to the 2 inch data and stencil marks. No generic CR data or fonts here ? this is hand-drawn from exact photos. The CR cars feature accurate body-mounted brake gear with all those visible rods and assemblies hanging below the car side just like they should. Did you notice the third arm mechanisms at the top of each door? We did, too ? they are accurate and appropriate for this car, as-built. SKUs -01 through -03 feature April 1978 data, and SKUs -04 through -12 feature May 1978 data. This is a big series of cars and they are ready to haul auto parts on your layout.
HO Trinity 3-Bay Hopper - INTX (3pk) #1
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO ACF 2970 Covered Hopper - NAHX Corning #90403
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons, stirrup steps and brake wheel
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Screw-mounted express-type trucks
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO Greenville 86Ft Quad Plug Door Box Car - BS-84 Claytor Repaint 1987+ - Southern (NS) #42409
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Southern (SOU) NS-era -BS-84 Claytor Repaint 1987+- is a very common 1980s paint job in the world of auto parts cars, this one for the Norfolk Southern (NS) system. After the NS merger, NS continued to paint cars in pre-NS schemes, this -Claytor scheme- repaint included. The Southern cars were built in February of 1970 as part of a lot that included the distinctive Center-Of-Car cushioning details. We have duplicated those same features underneath and on the ends, with the extended draft gear. The Claytor repaint features the original Apex crossover platforms with a Universal brake stand and brakewheel. Check out those gorgeous new 70-Ton Barber S-2 Birdsboro Foundry trucks with rotating -Timken- roller bearing caps, just like the prototype. These beauties are available with four road numbers!
HO 66ft Bulkhead Flatcar - CP Rail #317502
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
All Scale, Dead Fall - 1.75oz
Use this natural, realistic product to model fallen or standing dead trees and stumps. It has the look of aged wood with gnarled branches and knots with some smooth, weathered pieces. Use with any scale!
Pipe Load - Kit - Fits WalthersMainline 910-5800 Series Bulkhead Flatcar
Transform empty HO flats and gondolas in minutes with the 48ft Pipe Load from SceneMaster(TM), featuring:
-Fits WalthersMainline 60ft Pullman-Standard Bulkhead Flatcars (48ft IL) 910-5800 series cars, each sold separately
-Adaptable to many gondolas and flatcars (each sold separately)
-Great details for steel mill loading scenes or trackside unloading
-Easy to build kit with pipes molded in black and bracing in tan
HO Scale 80s GMC Brigadier Dump Truck Kit
This 1980s Era GMC is ready for your material moving needs. Precision cast pewter wheels, tires and details combined with a resin cab and dump bed are designed for easy assembly and painting. Clear parts enhance the finished model. Windshield panels are laser cut and the kit includes photo-etch details. Put this short hood 9500 muscle to work delivering bulk material on your pike. Detailed instructions can be viewed by visiting the Showcaseminiatures.net website
HO RTR 48Ft Husky Stack Wellcar - GBRX #2477
Detailed Information
MODEL FEATURES - 48Ft HUSKY STACK WELL CAR:
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
48Ft well cabable of carrying 20Ft - 48Ft containers on the bottom and up to 53Ft containers on top
HO ALCo RS-3, Phase 3 - DCC Ready - Burlington Northern #4082
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- fuel tank
- can motor
- flywheels
- blackened wheels with RP25 flanges and knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound V5 decoder
RTR 60Ft Gundreson Box Car - TTX #889069
Primed for Grime
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Primed for Grime Models Feature:
-Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
-Patches applied and shaped per road number matching each corresponding side to the prototype
-Duplicated look and feel of -In Service- equipment; -Tattered and Torn- just like the real thing
-Some Prime for Grime models feature paint scheme variations
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO AutoFlood III RD Coal Hopper - UP/CMO (6pk) #1
Includes the following numbers, all individually packaged:
#504250
#504273
#504288
#504294
#504302
#504395
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO SD75I - DCC Ready - BNSF #8300
Detailed Information
ROADNAME AND ROAD NUMBER SPECIFIC FEATURES:
BNSF FEATURES:
Purchased in 1997, BNSFs only order of SD75Is was numbered 8276-8301, and they bore a close resemblance to the SD75Ms, which came before. Perhaps the biggest difference was the use of the isolated cab, seen as rubber gasket running down the side of the nose. This was thought to increase crew comfort by isolating them from the noise and vibration of the engine compartment. All of the locomotives were delivered in the Santa Fe Warbonnet scheme, but with large -BNSF- letters on the side-creating a mix of old and new that was particularly suited to these locomotives. Their primary assignment was coal traffic, although it was not uncommon for them to stray westward on other types of BNSF trains.
All road numbers:
SD75 body with turbocharger bulge on firemans side
Freight type brakewheel
K-3 horn
Isolated cab with low mount headlight
Angled cab door with window
Octagon dome antenna
Spare knuckles on rear pilot
Jacking pads with AEI tags
Large emergency fuel cutoff button
Salem air filters
Round dial fuel gauge located in middle of tank
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Operating ditch lights
MU receptacles and cables per prototype
Pilot face spare knuckles and brackets per prototype
Early or late anticlimbers
3 or 4 step walkways
AEI tags mounted on the frame or jacking pads per prototype
Safety tread on the walkways
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Anti-glare panel painted on the nose
Windshield wipers
Tinted or clear cab windows per prototype
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Standard or Freight-style brake wheel
See-through radiator fans
Lift rings
Factory installed wire grab irons
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Dual sanding lines
Rear pilot drop grab iron (MU hose retainer) pre prototype
DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Incandescent bulbs for realistic appearance
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Recommended radius: 22inch
HO RTR 53Ft Jindo Container - UPSU (3pkg) #2
MODEL FEATURES:
Newest vertical rib front
Easily stackable
Separately applied door closure rods
Fully assembled
Each container individually numbered
Razor sharp printing and painting
AXIAL Yeti Jr CanAm Maverick RTR
1/18 scale radio control side-by-side all-terrain Vehicle primed for RC rock racing adventure right out of the box and includes everything you need
Features adjustable Coilover oil-filled shocks, metal gear servo, 37T 380 waterproof brushed motor, and hinged body mount for easy electronics access
Independent front suspension with machined aluminum cvds provide better control and high-speed Stability for off-road racing on rough terrain
Three-link rear suspension with floating solid rear axle provides sway-bar like support for improved a
Includes: 1/18 Yeti Jr Can-Am Maverick RC RTR |spectrum 2.4GHz STX2 radio system | 7.2V 6C 1300mAh NiMH battery | USB charger | 4 x AA alkaline
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
HO EMD SD70ACU - DCC Ready - Canadian Pacific CP (Sand) #7021
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
1:87 CAT D9T Track Type Tractor
Details:
1:87, Track-Type Tractor
Dimensions:
4⅜ x 2½ x 2¼ in
110 x 62 x 57 mm
HO Scale 53 Hyundai Hi-Cube Container 2-Pack - Ready to Run -- CSXU - CSXU 630491/630622
HO 60ft NSC 5150 3-Bay Covered Hopper - Archer-Daniels-Midland (ADMX) #52278
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO 66ft Bulkhead Flatcar - CP Rail (Black) (6pk)
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
HO AutoFlood III RD Coal Hopper - GLFX #8092
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Chinese Red) #5160
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
Athearn - N Scale 2 Bay 2600 Covered Hopper - Winchester & Western - #4013
Flush or overhanging roof per prototype
Etched metal roofwalks
Factory installed wire roofwalk grab irons
McHenry knuckle spring couplers installed
Weighted for optimum performance
Accurately painted and printed for prototypical realism
Minimum radius: 9 3/4"
HO CA-9 ICC Caboose w/Lights w/DCC & Sound - Union Pacific #25658
ETA: August 2021
Detailed Information
PROTOTYPE AND BACKGROUND INFORMATION
Built by International Car Company in 1967, UPs CA-9 class numbered 100 cabooses. The cars were very similar to the earlier CA-8 and later CA10 designs, but had minor differences in end cages and windows. The cars originally featured square safety slogans, and these were later changed to rectangular slogans. The eye-catching safety slogans made the cars distinctive; the later slogan boards were removable and could be swapped from car to car, meaning that certain road numbers wore several over the course of their lives.
ROAD NUMBER SPECIFIC FEATURES:
#25658, 25668, 25661 Early slogans, P on cupola representing Pool service,unique scheme with 14 inch reporting marks and 8-inch -Union Pacific-, as- built or modernized cupola windows as appropriate
#906251 MOW Office car, painted -Kenefick green,- Era: 1990s+
#25629, 25616 Later rectangular slogan boards, red P on cupola representing Pool service, modernized windows, Era: late 1970s+
HO GE ES44AC - DCC & Sound - Canadian Pacific #8767
ETA: June 2023
Detailed Information
CP FEATURES:
No engine compartment side grab irons
Raised radiator grills
Raised heat exchanger
Canadian Pacific placed eight orders for ES44AC locomotives spanning a decade of production. Early production units featured a distinct cab and nose profile as well as radiator, intake, and hood door variations. These features changed in later productions. The CP units in this offering represents features from the mid- production. While the cab, nose, and radiator intakes are the same as early units, the long hood doors and other features have evolved into what is found on late production units. Athearn has created new tooling to accurately produce these particular units.
ROAD NUMBER SPECIFIC FEATURES:
#8767
Standard Canadian Pacific paint scheme
PTC antennas
raised radiator screen
ES44 SERIES LOCOMOTIVE FEATURES:
Illuminated ditch lights
Tinted cab windows
Large antenna dome
GPS dome
Hand brake panel grille
Nathan K5HL horn
5000-gallon fuel tank
Low or high front headlight per prototype
See through dynamic brake intakes
Low or high front headlight per prototype
See through dynamic brake intakes
Short auxiliary cab rear left-side doors
Right side forward electrical cabinet with X-Panel
Engine compartment side grab irons (Non-CP Units only)
No engine compartment side grab irons (CP Units only)
Flush radiator compartment doors
Flush heat exchanger housing and top radiator grilles (Non-CP Units only)
Raised heat exchanger housing and top radiator grilles (CP Units only)
Dynamic brake exhaust vents spaced per prototype
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO DC-21 Pin Motherboard for LEDs (3)
Microscale MI-12 Liquid Decal Film 1oz
Everyone should have Micro Liquid Decal Film who models and uses decals. Especially if you have been at it for some time. The typical decal scrap box is not the best place to store decals. Exposed to air, sunlight, and moisture, great swings of temperature or general abuse, and decals will go bad. Or maybe you just always had trouble putting on thin stripes. Micro Liquid Decal Film solves all of those problems and makes a decal which for whatever reason is bad, work again just like new almost immediately. Of course if you have already put it in water it is too late. So if you have some old decals you really have to use, coat them with Micro Liquid Decal Film to be sure. Or if there is any indication that you might have a problem, dont take a chance, you can solve the problem on the spot. Simply take a small brush and coat the image on the decal you want to use. Allow to dry for 20 minutes. Apply the decal as usual. Its that simple.
HO Ford Crown Victoria Police Interceptor - Fire Command decals
(red, nonworking lights)
Product Information:
All units on all frequencies stand by to copy.... Be on lookout for SceneMaster Ford Crown Victoria Police Interceptor in HO Scale! Based on prototypes in service with police, fire and other public safety agencies from 1998 on, these officially-licensed replicas are perfect for patrolling HO highways, great for collections and must-have alongside the new Modern Police Station (933-4201, sold separately).
Other great features include:
-Colorful decals for easy customizing.
-Highly-detailed with interiors, clear windows, grilles, separate rolling wheels and tires, and nonworking lightbar as appropriate.
HO Duplex Sleeper - VIA Rail Canada #1121 / Elderbank
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
0.023 inch Thick Stainless Steel Flat Sheet - 6 inch x 12inch
Stainless Steel Flat Sheet 6inch Width x 12inch Long (1 pc)
W&LE #78007
MODEL FEATURES:
Wire and plastic handrails, stirrup steps, ladders and underbody details
Separately applied brake gear including brake wheel, air reservoir, and brake cylinder
Bettendorf or roller bearing trucks with 33In machined metal wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers
Painted and printed for realistic decoration
Weighted for trouble-free operation
Interior plastic blister safely holds the model for convenient storage
Window packaging for easy viewing
Fully assembled
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
The development of the hopper car went along with the development of automated handling of such commodities, with automated loading and unloading facilities.
Open hopper cars are used for commodities such as coal, which can suffer exposure with less detrimental effect. Hopper cars have been used by railways worldwide whenever automated cargo handling has been desired.
Evergreen Scale Models 4505 - 1/4in x 1/4in Opaque White Polystyrene Square Tile (1sheet)
HO Scale - RTR 60Ft Berwick Hi-Cube Box - Missouri Pacific #269488
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Detailed underbody including full brake gear
Weighted for trouble free operation
Replacement parts available
Machined metal wheels with RP25 contours operate on all popular brands of track
Separately applied wire grab irons and etched end platforms
Machined metal wheels
Body mounted McHenry operating scale knuckle couplers
Minimum radius: 22inch
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1746
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO Flexi-Van 40ft Trailer - Chicago, Louisville & Nashville (2pk)
(logo and Flexi-Van placards, end doors)
Capture the color and variety of early intermodal operations with SceneMaster flexi-van trailer 2-Packs! Introduced in 1958 with removable wheels for use on specially-equipped flexi-van flatcars, they were later converted to standard 40ft trailers for road and rail service and served into the 1980s.
FEATURES:
- End or side doors as appropriate
- Detailed wheels and bogie with landing gear
HO Trinity 3230 Covered Hopper - Greenbrier Management Services (BNBX) #95495
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
The Trinity 3230 Pressure Differential covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
Scene Master Hi Cube Refrigerator Container Evergreen
Prototypes in domestic service 1986 to late 2000s
Perfect load for new Walthers Proto Gunderson As-Built All-Purpose 48 Foot Well Cars (sold separately)
Based on common size and style
Improved door latch detail
Realistic loads for any well car
Evergreen Scale Models - Opaque White Polystyrene T Shape .257In x 14In (2 pcs pkg)
Perfect for moving bulk loads of all kinds that dont require protection from the weather, the WalthersMainline 34ft 100-Ton Two-Bay Hopper is a versatile addition to HO operations!
One time run of these road numbers, order now - limited quantity available!
In service from the 1970s to the present
Used to haul ballast, sand, gravel, ore and other bulk loads
Factory-applied door and brake details
Heavy die-cast metal underframe
Add a realistic load in minutes with the cast resin Chooch Gravel Load (214-7292) sold separately
Correct 36in RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO EMD FT A+B Set - DC/DCC/Sound - New York Ontario & Western (NYO&W Grey Scheme) #601A + 601B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
CANADIAN PACIFIC (1955 to late 1960s)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
-Factory installed Celcon handrails
-Individually applied wire formed grab irons
-5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
-See-through cab windows
-DCC Ready 21-pin NEM plug
-LED Illuminated front and rear headlights
-Nickel plated, blackened machined wheels
-Wheels with RP25 contours operate on all popular brand of track
-Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMD’s most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
HO Custom Oil Barrels - Green (5pk)
Pre-painted green and labeled. Assorted brand labels in each set.
HO Greenville 86Ft Quad Plug Door Box Car - Delivery 12-1969 - GTW #305738
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Grand Trunk Western (GTW) -Delivery 12-1969- is notable for several reasons. First, the classy GTW scheme looks especially good on this car (in our humble opinion) with the large GT logo centered between the paired doors. Second, GTW was the largest purchaser of Greenvilles quad door box car design, making them highly statistically relevant for modelers in the US and Canada. Painted in the characteristic GTW blue color with white stenciling, these cars are sure to be crowd pleasers and were seen widely. The GTW cars feature their as-built 1969 appearance that includes Gypsum crossover platforms, Ajax brake hand brake housing, Greenville-applied tack board locations and that beautiful End-of-Car Cushioning underframe setup. 70-Ton Trucks with 33inch wheels and rotating -Benco-6- roller bearing caps finish off this dominant offering. Our GTW masterpieces are available in eight different numbers.
PRLX ex Warbonnet #238
Expected in November 2020
Locomotive features:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Sound equipped models also feature:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PRLX features:
All PRLX locomotives are Primed for Grime with road numberspecific patches and fading
Many of BNSFs SD75Ms were in storage by 2014-2015. The 20plus year old units were definately past their prime at this point, however, most of them still had a future. Norfolk Southern bought a total of seven units, to become NS 2800-2806. In addition, Progress Rail Leasing (PRLX) bought a large group of the units. They arrived to PRLX wearing several paint schemes, including the Santa Fe Warbonnet as well as BNSFs Heritage II paint. The units were hastily patched and placed into service, as of this writing they are leased to CN and KCS, but future leasing assignments are likely.
Primed for grime models feature:
Duplicated look and feel of -In Service- equipment, -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per roadnumber matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
GMD SD40-2f - DCC & Sound - CP (Rect Porthole Sill Dashes) #9012
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
LOCOMOTIVE FEATURES:
CN “website†scheme
CN style plow
Correct trucks per road number
Forward and reverse ditch lights
Nathan K3L horn
#5620/#5624
Late EMD trucks
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
HO Scale - 1937 Studebaker COE Gasoline Tank Truck - Unpainted and Resin Cast Kit
HO AutoScenes - Farm Tractor and Disc
Highly detailed, custom painted vintage tractor with double disc assembly.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
HO 60ft NSC 5150 3-Bay Covered Hopper - Archer-Daniels-Midland (ADMX) #52333
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO RTR 68Ft Bulkhead Flatcar - Trailer Train TTPX #82138
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
Testors - Spray Enamel - Gloss Light Blue (3oz)
Testors 3 oz Aerosols come in over 50 popular colors and 9 different finishes. They offer superior adhesion to a variety of surfaces including wood, metal, glass, terra cotta, ceramic bisque and more. They are fast drying and easy-to-apply which means quick project completion.
HO 50Ft PCF B70 Boxcar - w/ Superior Doors - Southern Pacific #244090
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
Iwata Eclipse - HP-BS Gravity Feed Dual Action Airbrush
FEATURES:
Spray Performance Category: All-Star Versatility
Series: Eclipse
Spray Scale: Fine to Wide
Optimal Working Pressure: 25 - 35 psi (0.17 - 0.24 Mpa)
Head System: E3 - Needle, Nozzle, Nozzle Cap
Nozzle Type: Compression Fit
Feed Style: Gravity
Paint Capacity: 0.05 oz (1.50 ml)
Action: Dual
Handle Type: Single Cut
Net Weight (lbs): 0.19
Net Weight (kg): 0.09
Assembled Dimensions (in): 0.67 x 5.71 x 2.05
Assembled Dimensions (mm): 17 x 145 x 52
Iwata Eclipse Series airbrushes are known for their versatility. Eclipses high flow allows it to atomize a wider variety of liquids with less need for reducing or thinning. Eclipse Series offers a broad spray range, as compared to other airbrushes, where it is possible to achieve a controlled fine line to controlled wide spray.
This airbrush has a 1.5 ml fluid cup and is ideal when using small amounts of spray medium!
The Eclipse Series feature an exclusive compression fit nozzle that is easy to clean and assemble. The quick flush cutaway handle allows easy access to the needle so that you can quickly empty the paint reservoir for cleaning. Iwatas spring-steel needle resists breakage and our needle packings are solvent resistant for longevity. Iwata Eclipse airbrushes come with a head cap spanner that is used to remove the head cap when accessing the nozzle. Also included is Iwata Lube, which is used to lubricate the needle and main lever mechanism. Hugely popular, Iwata Eclipse Series airbrushes offer all-star versatility!
Who sprays with All-Star Versatility? Makers and creators who...
- Spray with fine to wide level of detail and scale
- Want the ease of a drop-in nozzle
- Have beginner to high-level airbrush skills
- Use thin to thicker viscosity or pearlized spray materials
- Are hobbyist or professional painters
- Want to spray many types of things using one airbrush!
HO Kenworth T680 Sleeper Cab Tractor w/Moving Van Trailer - Wheaton
(white, black, maroon)
HO Single BiLevel Commuter Car - Undecorated Coach - Series 3 Body
Note: Unnumbered coaches do not include decals. Decals are available from Highball Graphics.
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO NSC 5304 Boxcar - Canadian National (Red) Unlettered
The Rapido NSC 5304 cu.ft. CN Combo Door Boxcar features:
Separate grab irons installed at the factory
100-ton Barber S-2 trucks, with metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe
HO Bettendorf 50-ton Trucks w/33in Smooth Back Wheels - Metal Fully Sprung (1pair)
Mounts with a #2 or 2-56 screw.
Mounting Screws not Included.
The Bettendorf Double Truss Truck was introduced in the 1930s by U.S. railroads and was allowed to be used in interchange service through 1993. The Kadee #500, #502 & #550 represent 50- ton trucks for 100,000 pound cars.
Metal Fully Sprung Trucks Features:
Code 110 (.110) #520 33in Smooth Back Wheels
Accurate Markings
Incredible Detail True to Prototype
Non-Magnetic Metal Wheels
Highly Flexible Sprung Trucks
Metal Sideframes & Fully Sprung Bolster
Smooth tracking Free Rolling Contoured Insulated Plastic Axles
RP-25 Free Rolling Wheels
#637 HO Scale Truck Springs
Patent number 5,768,999
Package Includes:
(2) Each #500 Bettendorf 50-ton Trucks (assembled)
HO NSC Ballast Hopper - Canadian National (Maintenance Scheme) #302241
1976+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
Gunderson Multi-Max Auto Rack - CSX
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
18 inch Scale Straight Grab Irons .012inch Wire - pkg(20)
HO 20ft Corrugated Container - Container King/CKRU #1 (3pk)
MODEL FEATURES:
- Fully-assembled
- Easily stackable
- Each container is individually numbered
PROTOTYPE AND BACKGROUND INFO:
An intermodal container is a large, standardized shipping container, designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport ? from ship to rail to truck ? without unloading and reloading their cargo. Corrugating the sheet metal used for the sides and roof contributes significantly to the containers rigidity and stacking strength, just like in corrugated iron or in cardboard boxes. International containers have castings with openings for twistlock fasteners 20 feet apart on the eight corners, to allow gripping the box from above, below, or the side, and they can be stacked up to five units high for storage.
12inch Long Brass Channel - 0.014inch Thick x (1/4 x 1/8 inch Leg Lengths)
Brass Channel (1 pc)
Leg Lengths: 1/4 x 1/8 inch
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #00018
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Roof Top Wooden Water Tank Kit - Set of 3
Add our real wood water tanks to the roof tops if your buildings.
Easily paintable with water based acrylics.
Our kit builds into ...
- 3 detailed Roof Water Tanks
- Each approx. 0.75W x 2.5H (inches)
- Real wood tank with laser engraved Staves & Bands
- Optional Concrete Base
- Access Ladders
- Colour instructions
This is the same Water Tank as in our HO scale Roof Top Detail Kit.
1/8 inch OD Round Brass Tube (Soft Fuel Line) 0.014inch Thick x 12inch Long (2 pkg)
Round Brass Tube 0.014inch Wall thickness x 12inch Long Soft Fuel Line (2 pcs)
Outside Diameter: 1/8 inch
O (1:48) ABS 3Ft-0In STAIR (1pc)
Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision injection molded in Gray ABS Plastic. Ideal for all outdoor or profess model construction where model life is critical.
SCALE
O
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
17/64In
HEIGHT IN MM
6.7mm
WIDTH IN INCHES
7/8In
WIDTH IN MM
22.2mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
1/2In
LENGTH IN MM
300mm
HO 50Ft PS 5277 Box - Lake Superior and Ishpeming LS&I #2708
MODEL FEATURES:
Single 10Ft Pullman Standard door
Separately applied grab irons, end ladders, and brake wheel
Photo-etch coupler cross-over platform
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO 40ft Fruehauf Trailer - Penn Central #295532
Era: 1971-1990, 1991-2009, 2010-Present Day
MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- 2 or 4 door rods per prototype
- Wheeled or shoe-style landing gear per prototype
- Fully-assembled and ready to use out of the box
- Highly-detailed, injection-molded body
Flexible Cut Stone Wall w/Self-Adhesive Backing - Medium Cut
DIMENSIONS:
13-1/4 x 3-3/8 inches (33.7 x 8.6cm)
Fully detailed and painted, these flexible stone walls are easy to cut, curve and form. The interconnecting design and peel-&-stick backing makes installation easy so you will have a realistic wall in no time. Walls are available in several stone sizes to fit your layout.
Evergreen Scale Models - Opaque White Polystyrene Angle .250In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (4x6) .043In x .066In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 4 X 6 LUMBER SIZE IN HO SCALE
HO FMC 60ft DD/SS Hi-Cube Boxcar - Union Pacific #961062
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
MODEL FEATURES:
- Double 8 foot Youngstown doors
- Photo-etched coupler cross-over platform
- Separately applied grab irons, end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for trouble-free operation
- Body-mounted McHenry operating scale knuckle couplers
- 70 or -100 ton roller bearing trucks with 33 or 36 inch wheels per prototype
- Machined metal wheels with RP25 contours
- Minimum radius: 18 inches
HO Bathtub Gondola w/Load - EAMX 3pk Set #3
ERA: 1979+
MODEL FEATURES:
-Separately applied grab irons, end ladders, and brake wheel
-Weighted for trouble free operation
-Roller bearing trucks with 36in machined metal wheels and RP25 contours operate on all popular brands of track
-Body mounted McHenry operating scale knuckle couplers
-Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
-Replacement parts available
-Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
With the advent of rotary dumpers, the bathtub gondola allowed the railroads to haul more bulk cargo per carload than conventional open top hoppers. The absence of unloading gates and other appliances that affect internal capacity allowed for additional capacity per car. This improved transportation efficiency for these assigned service cars. The term Bathtub gondola is due to the internal shape of the car.
HO Trenton Works 6348 CN Boxcar - Canadian National (Website) #598035
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
Canada Southern #3354
Bowser ready-to-run 70-Ton Offset Hoppers are based on typical cars used across the continent for hauling coal and aggregates. Layout-ready cars feature accurate decoration, molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton Offset Hopper is a great addition to your transition or classic diesel-era car fleet.
Spray Can - Gold (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Rough-Edged Bright Paint Out Blanks
Decal set with a variety of shapes and sizes of blank paint patches in 5 colors.
These bright railroad colors include:
-GTW Blue
-Jade Green
-BN Green
-TTX Yellow
-ATSF Red
PRR X31A Single-Door Boxcar: Plain Keystone - Single Car #70094
(1961-1968)
Detail Variations:
6-pack includes the following numbers:
#68377
#70008
#70094
#70178
#70274
#76625
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.156 (9pcs pkg)
Individual File - Half Round
HO SD38 - DCC/Sound - Conrail (NS) #3805
ROAD NUMBER SPECIFIC FEATURES:
#3805
- White patch with black numbers
- faded paint effect
- triple clasp brakes
- large fuel tank
- rear mounted Leslie 3 chime horn
- front ditch lights
- angled cab roof antenna
- Prime A/C
- small EMD plow
#3818
- Black patch with white numbers
- faded paint effect
- triple clasp brakes
- large fuel tank
- rear mounted Leslie 3 chime horn
- front ditch lights
- cab roof antenna
- Prime A/C
- no plow
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
N Scale Universal Truck Mount Couplers - Short T Shank (2 Pairs)
Description
MT-7 Short (.225inch .57cm) T shank coupler conversion. Unassembled
HO EMD GP7 - DCC & Sound - Amtrak (Orange) #776
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
AMTK FEATURES:
NEW! Non-Dynamic with roof access hatches
1700-gallon fuel tank
Partial skirting above fuel tank
Front and rear flashing emergency beacon (in DCC mode only)
Flashing xenon strobes (in DCC mode only)
Wheel bearings per prototype
In the late 1970s Amtrak acquired a fleet of second-hand GP7s which were painted in a bright orange color for use in maintenance-of-way service (MOW). These highly visible units were quickly and unofficially named -Pumpkins- by the railfan community. They were frequently spotted hauling Amtrak ballast cars, flat cars equipped with special racks to carry rail, or gondolas that were used to gather scrap steel and wooden ties that accumulated on the right-of-way. Aside from MOW use, these units were used to couple Amtrak express Roadrailers to soon-to- arrive passenger trains. Pumpkins could also be found in service on non-Amtrak rails. For example, Amtrak -Pumpkins- were involved in the rebuilding of the Doylestown branch for the Southeastern Pennsylvania Transit Authority (SEPTA), and the Atlantic City line for New Jersey Transit. This bright paint scheme with unique details such as cab mounted strobes and end mounted emergency beacons will surely be an -attention grabber- on your layout.
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
N Scale Railcar Height Door - pkg(2)
HO Scale H1b Hudson Steam - DCC & Sound - Canadian Pacific (Beaver Shield) #2807
-Late walkway w/smoke deflectors
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO GMD SD40-2 - DCC Ready - FURX (Green and Silver) #3052
Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound Select decoder. Analog (DC) version has 21 pin socket for DCC module.
Bowser does not recommend LOK sound locos for use on DC layouts.
Features LokSound Select decoder, GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, Flywheels, Can motor, RP25 flange, KD couplers
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
HO RTR Trinity Rail 3281 Cu Ft 2-Bay Covered Hopper - First Union Rail (WSOX) #805043
(2011, gray, green, red, yellow conspicuity marks)
Product Information
This HO Scale TrinityRail 3281 Cu.Ft. 2-Bay Covered Hopper is based on a common late-1990s and later prototype commonly used to haul frac sand, roofing granules and similar materials. With the boom in frack sand traffic it isnt uncommon to see these prototypes used in unit trains. Prototype cars measure 41ft-11inch long, and the cars are equipped with three or five round loading hatches and a pair of gravity outlets for commodity off-loading. Compared with earlier 2-bay covered hoppers, these cars are distinctive. Notably, an overhanging arched roof, heavy top reinforcement stiffener, and folded jack pads at the bolster are spotting features for the Trinity 3281. This design has proven to be popular with shippers and railroads alike. The HO scale freight car features an injection-molded body, applied wire grab irons, photo-etched walkways and working shelf-type knuckle couplers without trip pins for scale appearance. Other details include roadnumbers printed on the truck sideframes, coupler cut levers, NMRA compliant car weight, trucks with spinning bearing caps, multiple roadnumbers per scheme and graffiti on select roadnumbers.
HO SD70M - DCC Ready - Ontario Northland/ONT Flared #2120
Detailed Information
ONT FEATURES:
Ex-NS
EMD deck mounted front and rear ditch lights
PTC antenna array
Late 4-panel radiator body
Late sloped EMD cab nose
Small EMD front plow
Late EMD trucks with exposed bearings
The Ontario Northland Railway is operated by the Ontario Northland Transportation Commission, part of the government of Ontario, Canada. During late 2022, ONT purchased a small batch of ex-NS flared SD70Ms. As of recently, only 2 have been repainted so far. We are offering both as new additions to your model railroad!
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO Deluxe Custom Gas Pumps - Mobil (2pk)
Pre-painted cherry red, one with white globe. Labeled with Mobil brand.
HO SD70ACe - DCC & Sound - Union Pacific/D&RGW #1989
Overview
UP HERITAGE FEATURES:
Unique heritage paint schemes introduced in 2006
Detailed to represent the units as the look currently
PTC antenna roofs
Animated rotating roller bearing caps
Re-tooled plows with grab irons
Union Pacific unveiled 6 SD70ACe locomotives with unique -Heritage- paint schemes in 2005 and 2006 to commemorate roads which they had absorbed or merged. These roads are the MP, WP, MKT, SP, DRGW, and CNW. The locomotives are numbered after the years which the mergers took place, or, in the case of the DRGW unit, the year that Rio Grande Industries acquired the assets of Southern Pacific.
SD70ACE SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 16,000-Gallon Clay Slurry Tank - GATX #29150
MODEL FEATURES:
- Separately applied fittings nozzle, manway, and small safety valve nozzle
- See-through Photo-etched metal walkways and end platforms
- Full brake plumbing and rigging including brake wheel, air reservoir cylinder, triple valve, brake linkage, trainline, brake rod, large brake
- Printed marking on the sides, ends, and top of the tank body
- Fine scale side ladders
- Placard holders
- Printed marking on the sides, ends, and top of the tank body
- Equipped with McHenry AAR upper/lower shelf couplers
- 36 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Multi-packs feature unique road numbers
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Kaolin, a fine white clay, is produced by the natural chemical weathering of aluminum silicate minerals such as feldspar. Mined in the southeast United States (primarily Georgia and Florida), kaolin is used in the manufacture of ceramics, bricks, light bulbs, cosmetics, medicines and food additives. The largest use is in the manufacturing of paper, especially in creating glossy paper. Kaolin is shipped both as a dry powder in covered hoppers and in tank cars with water as a slurry. In the slurry form the weight of water requires the tank cars be smaller capacity compared to other liquids such as ethanol and LPG. Identical tank cars are also used to haul calcium carbonate slurry, used in the making of lime and cement.
One of the more modern versions of the 16K Gallon Tank car is designed and manufactured by UTLX Manufacturing Inc (formerly Union Tank Car). The car is a 286K (referring to a 286,000 pound gross rail load limit) design with a capacity of approximately 16,000 gallons. The capacity varies slightly between UTLX and Englehard, the operators of the cars. The car is an AAR Plate C clearance car with a 111-inch I.D. tank and an overall length of 44 feet. For a complete bottom unloading the car incorporates a Funnel-Flow design. The cars are lined and kept in dedicated service to avoid cross-contamination.
HO Hardware and Lumber Store - Kit
This modernized Hardware and Lumber Store from Cornerstone makes a great addition to HO trackside scenes in city or country! Typical of lumber yard operations that expanded to sell hardware, tools and household items, many still in operation today, other features of the detailed structure kit include:
- Retail store and lumberyard in one complete kit
- Fits small town or city scenes from the 1970s to the present day
- Great value - kit includes Main Building, Lumber Shed, eight Pallet Racks, 10 Lumber Stacks, Street Sign and accessories
- Detailed wood front & overhead garden center rear door on Main Building
- Pallet Racks can be built as six singles or four doubles, with wire decking
- Plastic parts to build 10 lumber stacks in four sizes
- Optional clear exterior lights can be illuminated from behind (lighting/electronics sold separately)
- Separate rooftop air conditioner, trash cans, propane locker, gas and electric meters
- Molded in seven colors and clear plastic
Measures:
Main Building - 8-7/8 x 9-15/16 x 2-13/16 inches (22.5 x 25.2 x 7.1cm)
Lumber Shed - 9-3/4 x 4-1/2 x 2-3/4 inches (24.7 x 11.4 x 6.9cm)
Pallet Racks Single - 1-3/4 x 7/16 x 1-21/32 inches (4.4 x 1.1 x 4.2cm); Double - 3-7/8" (9.8cm Wide)
Sign - 11/32 x 1-5/8 x 2-15/16 inches (0.8 x 4.1 x 7.4cm)
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - Great Northern Rack/ Trailer-Train Flatcar RTTX #501922
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers
Fox Valley Models N Bi-level Auto Rack
Southern
Features:
Die-cast underframe
Finely Molded Details
Etched Metal Panels
Formed Wire
Sharp Painting & Lettering
Multiple Road Numbers
Die-Cast Underframe
Metal Wheelsets
Micro-Trains Trucks & Couplers
Travelers with Luggage pkg(5)
Bring new life to your layout with ready-to-use Walthers SceneMaster figure sets! Each figure is carefully sculpted with realistic detail and hand-painted (unless noted).
Modern Freight Cars by Jeff Wilson
In Modern Freight Cars from Kalmbach, noted modeler and former Model Railroader Magazine staffer Jeff Wilson provides an overview of freight cars from the 1960s through today. This is an essential guide for model railroaders who model the 1960s through today, as well as railfans and freight train enthusiasts. The book features more than 200 photos and covers various types of cars, including boxcars, hoppers, and gondolas, and how they evolved, as well as new car types, including intermodal cars and 89-foot auto tracks. Modern Freight Cars: Rolling Stock from the 60s Through Today also gives a deeper look into how different industries use freight cars, when cars entered service, and the dates when rules and restrictions took place. Other topics include:
Freight car evolution (size and weight increases; new car types)
Car components (brake systems, trucks, and couplers)
Hi-cube and specialty boxcars
Intermodal cars (flat, spine, and well cars)
Open and enclosed auto racks
Mechanical and cryogenic refrigerator cars
Center-beam flatcars
And much more!
N Scale NSC 73Ft Centerbeam Flatcar - BNSF #563181
The N Scale NSC 73Ft Centerbeam Flatcar features:
Two top truss configurations; early Z pattern and standard closed pattern with tie-down brackets
Two deck configurations; early with risers and mid without riser
Two underbody configurations
Multiple brake stand options
Multiple truck types
Fully detailed underbodies with brake piping and rigging
Free rolling, metal wheelsets
Multiple end cage variants
Burnt Vehicles Weathering Set
This weathering set will allow you to faithfully recreate the appearance of burnt-out vehicles. The four included pigment colors will help you to reproduce the ashes, black stains and other effects that may be observed on fire-damaged vehicles, whilst our well-received Pigment Fixer will allow you to fix your work in an effective way.
This set contains:
_ AK039 Black.
_ AK142 White Ashes.
_ AK143 Burnt Umber.
_ AK144 Burnt Rust Red.
_ AK048 Pigment Fixer.
Tru Color Paint - Acrylic - Toronto Hamilton & Buffalo Maroon - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO RTR Thrall 5-Unit Rebuilt 40Ft Well Car - Trailer-Train DTTX #748106 A-E
(yellow, Small Red Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft on both single and five-unit cars. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers - limited quantiuty, order now!
100- and 70-ton roller bearing trucks
Correct 36inch and 33inch RP-25 turned metal wheelsets
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
Proto MAX(TM) metal knuckle couplers
HO Extendible Container Chassis - Kit - 40Ft to 48Ft (2pkg)
Product Information
This Walthers SceneMaster Extendible Container Chassis is a must-have accessory for your HO Scale intermodal terminals, industry and highway scenes. Typical of equipment used all over North America from the 1980s to the present, it can be used with most containers (sold separately) from 40Ft to 48Ft long and semi tractors (sold separately). The kit includes parts for two complete chassis molded in black plastic, and illustrated instructions.
Prototypes used for hauling containers from container yard to end user
Two complete chassis per kit
Use with SceneMaster and other HO Scale Intermodal Containers
Parts molded in black
Easy-to-build kit
RS-18u, DCC Ready - Ottawa Central #1815
Era:1998-2008
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
Tangent Scale Models HO Greenville 86ft Quad Door Boxcar - PC- Delivery X-60-R 2-1970
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Penn Central (PC) -Delivery X-60-R 2-1970- offers another big paint scheme for our customers. A big PC logo dominates the center of these cars, with a stacked Penn Central on the far left. Fans of the Penn Central expect the best from Tangent, and we aim to deliver just that. This 1970-built Greenville group features accurate End-of-Car Cushioning details, Gypsum crossover platforms and truck mounted brake hardware. This X-60-R order rides on 70-Ton Barber S-2 Birdsboro Roller Bearing Trucks, with 33in wheels and accurate rotating Brenco-6 roller bearing caps. These cars were part of the GM Lansing Stamping Plant car pool, with a return-when-empty stencil the GTW in Lansing, Michigan. These beauties are available with eight different road numbers!
BTN8 Momentary SPST Normally Open Pushbutton - Red (8/pk)
1/4 inch (6.35mm) mounting hole.
HO RTR ACF 4650 3-Bay Hopper - Sclair #46518
Date: BLT 8-72
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
N Scale Locomotive Coupler Conversion Kits - Con-Cor PB-1 Powered
Description
N Scale Package includes one front and one rear coupler. This conversion fits: Con-Cor: PB-1 diesel.
HO Gunderson 6276 50Ft Plate F Boxcar - AOK #115194
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
HO Hawker-Siddeley Van - Caboose - DEVCO Railway #9106
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
Fall Colors 3/4 - 2inch 2 - 5.1cm; pkg(38
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors.
HO GP40 - Gold DCC & Sound - CSX (MOW) #9709
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
1/8 inch Open Web Truss - Warren Style (2pcs)
Excellent for towers and booms. Also good for roof trusses, bridges, conveyors, and space frames. Tee flange on one edge only allows easy registered assembly for triangular and square sections as pictured at left. Protruding side of flange may be removed if desired. Precision Injection Molded in Dark Gray ABS Plastic.
Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/8 in
HEIGHT IN MM
3.2mm
WIDTH IN INCHES
3/16 in
WIDTH IN MM
4.8mm
THICKNESS IN INCHES
.015 in
THICKNESSS IN MM
0.4mm
LENGTH IN INCHES
3-1/4 in
LENGTH IN MM
80mm
HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Circle Keystone) #727340
1948+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Hedge Row
7-3/4 x 1 to 2inch 19.6 x 2.5 x 5cm Tall
Make Realistic Scenery in Minutes
Give your layout a change of scenery with Woodland Classic Trees from Woodland Scenics. Fully assembled and ideal for foreground detail, the selection includes several types of trees along with hedgerows. The models are finely detailed with painted, flexible trunks and foliage with natural contrast to enhance any layout or diorama. A unique planting pin and detachable base allow for temporary placement, or ease of removal for cleaning and maintenance. Easily mixed and matched to capture the variety found in nature, trees range from 3/4 to 9inch tall, making them ideal for modelers in all popular scales.
1:87 2020 Proterra Catalyst Electric Bus - White Unlettered
By Awesome Diecast
HO RTR 53Ft Rivet Side RoadRailer Trailer - Norfolk Southern (Triple Crown) #460019
Rivet Side Large Triple Crown Norfolk Sou.
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
HO RTR 70 Ton 2 Ballast Hopper w/ Side Chutes - Santa Fe ATSF #177781
Blt. 2-57
Product Information
Perfect for work train service on our railroad, Bowser HO Scale ready-to-run 70-Ton 2-Bay Ballast Hoppers with Side Chutes (Ballast Gates) feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make these 70-Ton Ballast Hoppers welcome additions to any diesel-era freight train consist.
HO Alphabets - Condensed Gothic - Yellow - Waterslide Decals
Description: (formerly 87-93-6) Alphabets - Condensed Gothic - Yellow - Waterslide Decal
HO Scale AMD103/P42 - DCC Ready - Amtrak (50th Anniversary Phase 5) #46
Detailed Information
AMTRAK FEATURES:
Amtraks five commemorative 50th Anniversary P42 locomotives were created to celebrate 50 years as Americas Railroad, each with a different design. The lineup includes old favorites (Phase I and Dash 8 Phase III), a present day (Phase V) and two new designs (Midnight Blue and Phase VI). Athearn is working closely with Amtrak to authentically replicate each of these special liveries that will be operating across their system.
Collect all five!
-Concept art provided by Amtrak and
may vary from actual Locomotive
ROAD NUMBER SPECIFIC FEATURES:
#46
Bolt-on nose
PTC antenna farm
#100
Bolt-on nose
PTC antenna farm
AMD103/P42 SERIES LOCOMOTIVE FEATURES:
Officially licensed product of Amtrak (Amtrak-painted units)
3 different nose variations: Amtrak as-built, Amtrak rebuilt, and Via
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Flexible rubber MU hoses
Flexible rubber trainline hose
Scaled from prototype resources including drawings, field measurements, photographs, and more
Separately applied wire handrails
Exhaust stack
Photo etched metal radiator fan grille
Highly-detailed underframe including air tanks with air lines, air filter, and air dryer with two different types of rock shields
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting including operating ditch lights and red marker lights
Completely-redesigned die-cast frame for superior tractive effort
Packaging securely holds model for safe storage
Fully-assembled and ready-to-run
Accurately painted and printed paint schemes
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - Denver & Rio Grande Western(TM) Rack /Trailer-Train Flatcar TTKX #802548
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO EMD SW900 - LokSound 5 Sound & DCC - Soo Line #325
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- ESU LokSound 5 sound for DCC and DC layouts
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
HO 40Ft Boxcar w/ Early Improved Dreadnaught Ends - Great Northern (Mineral Red) #21573
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
Fine Red Sable Brush - Size 2
Built-&-Ready Landmark Structures - Country Store Expansion
Assembled - 6-7/16 x 5-1/2 inches
(16.4 x 14cm)
The general store is expanding and construction is well underway on the new addition.
HO 60ft Flat Car - British Columbia Railway #1555
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #676127
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO ET44 Tier 4 - DCC & Sound - CSX ET44AH #3394
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Red
HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) #484643
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
N Scale US&S Single Door Cabinet
The tube inside this cabinet is 0.49inch OD and is non-removable. Our 2.8inch long tube, mast kit #582 fits down inside this cabinet tube.
4mm Static Grass - Dead Grass (20g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
HO Instant Horizons(TM) Background Scene - Desert to Country
DIMENSIONS: 24 x 36 inches
Create a unique background for your layout with Instant Horizons. Easy to install, these printed backdrops add depth and distance by creating a smooth transition between you actual scenery and backdrop.
These special views smooth the transition between different kinds of scenery, creating a more natural and realistic change.
HO 45Ft Trailmobile Dry-Van Trailer - Taggart Trucking #5431
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
60Ft PS-1 Boxcar - Grand Trunk Western - Blue #383321
Beginning in the 1960s, automakers approached rail carriers with the desire for larger freight cars to transport auto parts from suppliers to manufacturing centers. In response, the 60Ft auto parts boxcar was introduced. Carrying a wide variety of auto components including engine blocks, transmissions, brake drums, and others, these cars were a fixture throughout North America for the next four decades and can still be found in service today. Often times, entire trains of auto parts and related cars could be seen near major production facilities as automakers switched to just-in-time delivery methods, requiring prompt deliveries from the railroads providing service. It was common to see trains consisting of 50Ft, 60Ft, and 86Ft boxcars, specially modified flat cars to carry lightweight chassis, and autoracks all destined for one auto or truck manufacturing facility. As the auto industry supply chains evolved and manufacturing facilities were consolidated, many of the 60Ft boxcars were used in other markets and could be found hauling a variety of goods including appliances, paper goods, cardboard, and similar items.
HO Greenville 86Ft Quad Plug Door Box Car - Delivery 12-1969 - GTW #305735
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Grand Trunk Western (GTW) -Delivery 12-1969- is notable for several reasons. First, the classy GTW scheme looks especially good on this car (in our humble opinion) with the large GT logo centered between the paired doors. Second, GTW was the largest purchaser of Greenvilles quad door box car design, making them highly statistically relevant for modelers in the US and Canada. Painted in the characteristic GTW blue color with white stenciling, these cars are sure to be crowd pleasers and were seen widely. The GTW cars feature their as-built 1969 appearance that includes Gypsum crossover platforms, Ajax brake hand brake housing, Greenville-applied tack board locations and that beautiful End-of-Car Cushioning underframe setup. 70-Ton Trucks with 33inch wheels and rotating -Benco-6- roller bearing caps finish off this dominant offering. Our GTW masterpieces are available in eight different numbers.
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Weyerhaeuser #1117
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
N Scale Short Barrel Ore Hopper - CN Scale Test Car (3pkg)
Road Numbers Include:
52283, 52284, 82285
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
N Scale Scenic Accents(R) Figures -- Checker Players
Evergreen Scale Models 9006 - .010in Clear Oriented Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
Spray Can - Metallic Black (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Spray Can - Neutral Gray (USAAF) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
HO Scale - HO 30,000 Gallon Ethanol Tank Car - UTLX - #2 - 3pack
212883, 212887, 212893
Detailed Information
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
HO MLW C-630M - DCC Ready - Canadian Pacific #4502
Exec = Executive Line: Ready to Run, super detailed, numbered, with Analog (DC).
Analog (DC) version has 21 pin socket for DCC module.
Bowser does not recommend LOK sound locos for use on DC layouts.
DCC 21 pin decoder - newest production
ESU #59629 (8 Functions) Recommended Decoder
or
TCS #EU-821 8 function decoder
HO SD75I - DCC & Sound - Canadian National #5750
CN FEATURES:
SD75I body with isolated cab and turbo bulge
Many Canadian-specific detail parts, including:
Ribbed anticlimbers
Raised walkways
CN medium plow on front
CN rock pilot on rear
No HVAC louvers under cab
Pyle early headlights
Large grabirons on cab face
K-3 horn with all bells forward
Spare knuckles on rear pilot
HTCR-II trucks
Large & small Sinclair antennas
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 1988 G43B Coil Svc. Gondola w/ Coil Racks (Coils Not Included) - Conrail (CR) #601833
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -1988 G43B Coil Svc.- With Coil Racks ? Coils Not Included in the now-classic Conrail red paint. This series represents the former PC-painted G43B series. Conrail maintained the lettering locations that PC did, painting the Conrail reporting marks, road number, and Conrail can opener logo in the same locations PC had stenciled them. The G43B prototype features cushion draft gear, giving the model a distinctive look compared to the other G43 classes. The top chord of the car has a -COIL STEEL LOADING ONLY- stencil to remind customers and railroad officers that the car is equipped with coil racks. Our model has coil racks too, and we sell beautifully executed steel coils for this car separately. We recommend a load of four coils if you want to replicate most prototype loading patterns ? for the size of coil we created. Yes, we did the math. These Conrail coil service gondolas are offered in 12 road numbers and feature details appropriate for these 1969-built cars.
RTR 60Ft Gundreson Box Car - AOK #112144
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO EMD SD9 - DC/Silent - Chicago & North Western #6608
Chicago & North Western
- Rebuilt at the Oelwein Shops with chopped down nose - a first in HO Scale!
- Modified panels on side sills of locomotive
- Modified/plated over details of dynamic brake blister (Smooth plating over where grilles once were)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO Scale G2 SD90MAC Diesel - DCC Ready - Norfolk Southern #7287
Detailed Information
NS FEATURES:
Primed for Grime
Patches match prototype deletion of UP reporting marks
Different patch shapes, paint color, & slogans per road number
Former UP units; major spotting details remain the same
EOTD above left rear of fuel tank
This group consisted of 110 second-hand units in total, 100 coming from UP and 10 from CEFX. Purchased with rebuilding into SD70ACus in mind, but were used in service as-is for a time before being rebuilt.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
Evergreen Scale Models Opaque White Polystyrene Strips 14in .10x.125 (7pcs pkg)
HO Coalveyor Bathtub Gondola - David Joseph (Teal) #30960
FEATURES:
Die-cast chassis
Ready-to-run
Interior bracing
Removable coal load
AccuMate couplers
Brake detail
100-ton roller-bearing trucks
Fine scale wheels
Accurate painting and printing
These cars were usually run in blocks of 4-12 units, carrying
construction and demolition debris.
SD70MAC Diesel, w/ DCC & Sound - PRLX #9559
Era: 1994+
Primed For Grime
EMD SD70MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
First time ever with front and rear Rubber MU hoses, Trainline hoses, Cut levers, and rear Spare
PRLX FEATURES:
Progress Rail ended up with quite a few ex BNSF units when their lease expired. While roaming the whole system, they were picked up by NS and CSX as extra lease power and can been still seen operating today.
LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PROTOTYPE SPECIFIC INFORMATION
During the early-1990s, EMD teamed-up with German engineering company Siemens to produce a freight locomotive that was capable of providing AC-traction drive currents, and thus providing a high-horsepower rating and lower fuel consumption for railroads which had an ever-increasing demand for saving fuel consumption by using a lesser amount of units to haul most of their trains.
The EMD SD70MAC was first introduced in early 1993, and began production later-on during the same year after numerous tests and improvements were made. Since then, the EMD SD70MAC has been a staple of heavy freight lines across the country.
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended.
Talus - Coarse Buff (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings, and/or road cuts. Intermix grades and blend shades for the most realism. Color natural talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle talus and secure with scenic cement (#191).
Particle size - Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
HO Scale Thrall 53Ft Articulated Well Car Set - TTX (Forward Thinking Large) #728257 (3pkg)
Features:
Each car consists of three wells--A,B & C.
Walkway variants specific to prototype
Etched metal detailing
Detailed air reservoirs
Detailed brake valves
Sharp hand grabs and stirrups
Runs on 18inch radius
Recommended for 22inch radius
Floor pin holes for Atlas and other brands of containers
Product Information
When the domestic intermodal container market settled out in the late 90s, the 53Ft long container emerged the winner. Car builders responded with new wells of like size to accommodate the new standard. Introduced in series service in early 2000, Thralls triple 53Ft articulated well car was certainly the best looking of the 53Ft wells. Angular wheel cutouts, 3 flared-bottom wide and 8 narrow side posts give this intermodal age well car character.
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) #653036
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO Alco RS-3 Phase 1 - DCC & Sound - Erie w/ Large Louvers #918
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. DCC/Sound version features LokSound V5 decoder.
Replacement Strips for 1-1/2Inch Finger Sander (4 pkg)
150 Grit
HO H-6-G - DCC & Sound - Canadian National Railway (Straight Wafer) #1371
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO FMC 60ft DD/SS Hi-Cube Boxcar - Norfolk Southern #620027
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
MODEL FEATURES:
- Double 8 foot Youngstown doors
- Photo-etched coupler cross-over platform
- Separately applied grab irons, end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for trouble-free operation
- Body-mounted McHenry operating scale knuckle couplers
- 70 or -100 ton roller bearing trucks with 33 or 36 inch wheels per prototype
- Machined metal wheels with RP25 contours
- Minimum radius: 18 inches
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
Models depict in-service locomotives from the mid-1990s and beyond.
Road name and road number-specific painting and lettering.
Multiple road numbers offered.
New and improved high-torque motor and drive mechanism guarantees smooth operation.**
Operating radiator fans. Improved radiator fan drive unit with quieter operation and selective fan control.**
All-wheel power pickup and all-axle drive.
Heavy die-cast, zinc alloy chassis.
AuroraJanney scale head replica couplers installed.
NMRA RP-25 wheel contour with Code 110 tread width.
Minimum radius: 18? (recommended 22?)
* Lighting functionality is limited on DC models operating on DC track power.
** Improvement over our previously-released HO scale SD60F.
DC Version Features:
DCC ready with 21MTC connector.
Dual sugar-cube speakers (functional after installation of a DCC sound decoder).
Operates on DC track.
HO Master MP-36 - DCC/Sound - Metrolink #895
Features:
- Golden-white LEDs
- Realistic die-cast underframe
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Realistic lighting effects including ditch lights and in-cab light
- Metal knuckle couplers
- Detailed cab interior
- Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
- Coupler cut levers
- Multiple unit hoses and trainline hoses
- Recommended 22 inch radius with Atlas passenger cars
DCC Ready Units:
- Equipped with a speaker for easy conversion to sound with the addition of a decoder.
DCC ESU LokSound Functionality Features:
- Over 20 sound effects are available including Head-end Power (HEP), engine start-up and shutdown, prime mover sounds through all eight
notches, bell, air horn, air compressor, dynamic brakes and more.
- There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
Tru Color Paint 196 - Acrylic CN 44-60 Ft Car Brown -1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 40Ft Wood Reefer - NWX #15108
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - New Haven (Script) (6pkg)
6-Pack includes the following numbers, all individually packaged: #30004, #30009, #30042, #30084, #30172, #30294
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended.
HO RTR Trinity Rail 3281 Cu Ft 2-Bay Covered Hopper - Excel Railcar ERCX #7026
(gray, red; Yellow Conspicuity Marks)
Product Information
This HO Scale TrinityRail 3281 Cu.Ft. 2-Bay Covered Hopper is based on a common late-1990s and later prototype commonly used to haul frac sand, roofing granules and similar materials. With the boom in frack sand traffic it isnt uncommon to see these prototypes used in unit trains. Prototype cars measure 41ft-11inch long, and the cars are equipped with three or five round loading hatches and a pair of gravity outlets for commodity off-loading. Compared with earlier 2-bay covered hoppers, these cars are distinctive. Notably, an overhanging arched roof, heavy top reinforcement stiffener, and folded jack pads at the bolster are spotting features for the Trinity 3281. This design has proven to be popular with shippers and railroads alike. The HO scale freight car features an injection-molded body, applied wire grab irons, photo-etched walkways and working shelf-type knuckle couplers without trip pins for scale appearance. Other details include roadnumbers printed on the truck sideframes, coupler cut levers, NMRA compliant car weight, trucks with spinning bearing caps, multiple roadnumbers per scheme and graffiti on select roadnumbers.
HO - ACF 5250 CF Hopper - Rock Island #13981
Budd Baggage-Dorm Original Scheme - VIA Rail #601
Each Baggage-Dorm includes:
Realistic stainless steel finish
Track-powered interior lighting compatible with DC and DCC layouts
Full underbody detail including separate air, steam and electrical lines
Separate metal grab irons, stirrups and end gates
Accurate D22 brake equipment and piping
Super-detailed 41-NDO-11 trucks with end frames
Full, multi-color interior detail
3D CP beaver shields on CPR models - not just a printed picture!
Sprung diaphragms
Metal Macdonald-Cartier knuckle couplers
2mm Static Grass - Winter Grass (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
N Scale Long Barrel Ore Hopper - Ontario Northland: Chevron Scheme (6pkg) #2
Road Numbers Include:
6629, 6630, 6633, 6636, 6638, 6639
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO PC&F 5241 CUFT - Boxcar - Berlin Mills - Single Car #244
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Ready to Run - Jordan Spreader - Painted, Unlettered (Yellow)
Now you can add one of the most versatile machines every built to your maintenance-of-way fleet with the WalthersProto Jordan Spreader! Used to profile and grade drainage ditches during warmer weather, when the flakes start flying, Jordans can be found plowing snow and pushing it back from the tracks. These HO replicas are based on the model 2-200 Spreader-Ditcher-Snowplow used by dozens of railroads, which have been in service year round since the 1920s. Featuring all-new tooling, the models are a perfect companion to the WalthersProto Russell Snowplows (sold separately) and feature:
Limited edition - one-time run of these numbers
Factory-installed grab irons
Positionable wings and moldboards can be raised and lowered
Built tough with durable metal hinges and other details
Complete underbody with brake gear and piping
Thin profile stirrups
Cab window glass
Railroad-specific details
Horizontal or vertical air reservoir
Original or one of 3 later headlight styles as appropriate
70-ton roller bearing or Bettendorf trucks as appropriate
Single-chime air horn placement
Ultra-smooth rolling metal axles and 33in wheelsets
Proto MAX(TM) metal knuckle couplers
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - DEAX #11344
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Tangent Scale Models HO PS4750 Covered Hopper ROCK -Delivery Blue 6-1978
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ROCK -Delivery Blue 6-1978- is available in the Blue Original 1978 scheme. Our -R- black and white logo and blue color is stunningly executed, check it out for yourself. ROCK lettering done right is something to behold, with accurate data stencil breaks and careful duplication of ROCKs data style. This is Tangent-accurate hand-drawn artwork. We have also matched the 1978 ROCK details including body-mounted brake center sill linkage, Miner outlet gates, a Universal hand brake and matching Universal brake wheel.
Oval Speaker - 40 X 20mm
This is a great speaker for many HO and S-scale locomotives.
Dimensions: 40 x 20 x 8mm(D)
Frequency Response: 550Hz - 12kHz
Power: 1 Watt (Nominal) 1.5 Watts (Peak)
Impedance: 8 Ohms
HO GMD SD40-2 - DCC & Sound - CP Rail: As Delivered #5659
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
Spray Can - Light Metallic Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Square Mega Bass Speaker - 23mm
This speaker is perfect for enhancing the low bass sounds that are found in most diesel decoders. It is well worth the extra effort!
Dimensions: 23 x 23 x 10.2mm(D)
Frequency Response: 275Hz - 20kHz
Power: 2 Watts (Nominal) 4 Watts (Peak)
Impedance: 8 Ohms
Atlas 562 HO Code 83 Turnout w/Nickel-Silver Rail & Brown Ties - Custom Line - #4 Right Hand
23 cm - 9 inches long
Spray Can - Aluminum Silver (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Peel n Place Tufts - Brown Seeding Tufts
The Woodland Scenics Peel n Place Tufts allow you to model a variety of grassy plants often found in fields, meadows and pastures. Available in several styles of grasses and flowers, these tufts are ready-made and can be used right out of the package. Simply peel the tufts from the tray and place them where desired. Combine Peel n Place Tufts with other Woodland Scenics scenery materials to enhance your layout.
HO 5820 Covered Hopper - Procor/UNPX (BF Goodrich) #122157
Era: 1978+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
Spray Can - Intermediate Blue (USN) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
Tangent scale model HO Lehigh Valley
Product: Bethlehem 70-Ton Riveted Drop-End Gondola
Scale: HO Scale 1:87.1
Truck: Tangent ASF 70-Ton Ride Control
Wheels: CNC-Machined 33ft Wheels with Detail Back
Lehigh Valley Gray 5-1973 represents a series of Lehigh Valleys gray-painted, internal shop program repaints that were performed at Sayre, Pennsylvania Lehigh Valley (and USRE) painted these Bethlehem Steel gondolas in a myriad of colors including two different greens, Cornell red, black, and gray. This is our first gray-painted offering. This model includes a light gray interior wall color matching the prototype plus the etched-metal Wine tie-downs on the top chord of the car, and ACI label. This is the first time Tangent has released this scheme from May of 1973
HO Converted Quonset Hut - Kit
FEATURES INCLUDE:
- Easily adapted to many types of small businesses
- Fits layouts from late 1940s to present
- Decorative brick false front attached to Quonset hut
- Build with side windows or corrugated metal inserts - both included
- Authentic design and details including modernized rear wall
- Add-on window air conditioners and electric meter
- Colorful decal signs
- Molded in three colors and clear plastic
Measures:6-9/16 x 2-3/4 x 2-1/8 inches
Walthers Cornerstone Turntable Control Box
For Walthers Turntables produced 2016 or later
Use on layouts with DC or DCC train control
Simple operation & programming with:
- Programmable indexing for up to 99 different tracks
- One-touch 180-degree bridge rotation in either direction
- Simplified LED display with adjustable brightness
Operate turntable (sold separately) from up to four remote locations with additional Control Boxes
For more information and accessories go to Walthers Web site
Cornerstone Advanced Turntable Control Module
Motorized 110 Ft Turntable
HO Bathtub Coal Gondola - DREX (ex-Procor) #104021
Built: 5-05
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO 50ft Evans DD Plug Boxcar - HS #11471
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Scale Lees Grocery Store Kit
3-1/2 x 4-1/4 x 4-5/8in
8.9 x 10.8 x 11.7cm
Product Information
Attention HO shoppers, check out the great features of the Lees Grocery Kit from Cornerstone. Designed for simple snap-together construction with little or no gluing needed, window mullions are molded into glass for true to scale appearance. Parts are also molded in realistic colors so no painting is needed. Other features include:
Great small business for town or city scenes
Walls and trim molded in realistic colors as one complete part - no painting needed!
LED interior lighting included
Simple snap-together construction with minimal gluing
Window mullions molded into glass for true to scale look
Perfect for steam, diesel and modern layouts
Detailed brick walls
Full-color printed drapes and window detail sheet
Sign decals for five different businesses
Molded in two colors and clear plastic
Juneco Scale Models Roof Vent
20Ft Corrugated Containers with Corrugated Doors, Safmarine 2pk
425035(9) and 592830(5)
HO FCA 52ft 100-Ton Bulkhead Flatcar - CWLX #200065
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2016 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
50ft Ext Post High Cube Plug Door Box - Wisconsin Central #1723
MODEL FEATURES:
Former MDC tooling
Brand new paint schemes
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Separate brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 18inch
HO 85Ft General American G85 Flatcar - GTTX (Brown) #300330
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .188In x 14In (4 pcs pkg)
HO New Look Bus - Public Service COORD. Transit (New Jersey) - 112 Journal Square - Deluxe #506A
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
HO Rotary Dumper - Superior Paper - Kit
The Walthers Cornerstone Rotary Dumper is a great addition to all types of heavy industries that need to unload large quantities of raw materials in a hurry. Paper mills like Superior Paper that do not have their own debarking or chipping facility receive shipments of wood chips by train. They are unloaded quickly by spinning a clamped rail car around, dumping the load into a pit beneath the tracks. The wood chips are moved by conveyors and often piled high for storage outside the mill. At steel works, they handle hoppers of limestone as well as coal for the coke ovens. Paper mills use them to empty woodchip cars. Powerplants make quick work of unloading unit trains without uncoupling cars. In any setting, this detailed model captures the look of the real thing for your layout. Detailed styrene components simulate the heavy steel construction of the prototype and include positionable turning machinery.
Kit measures: 9-1/2 x 7-1/4 inches
Required depth clearance: 2-1/2 inches
Expand container traffic on your 1960s and 70s era HO layout with this series of authentic models from - SceneMaster, featuring:
- Standard end-door and right-side door versions as appropriate
- Authentic rivet, door latch and hinge details
- Colorful period schemes
- Perfect period loads for WalthersMainline G85 and 60ft Pullman-Standard VTTX container flatcars (each sold separately)
OVR Exclusive - HO Bi-Level Auto Rack - Canadian National/TTGX #702477
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
N Scale Wide-Vision Caboose - Norfolk Southern #555596
The Rapido Trains N scale Wide Vision Caboose features:
Super-detailed underbody including all separate air and brake piping
Free rolling Barber-Bettendorf caboose trucks
Detailed interior
Full end detail, including uncoupling levers
Separate metal grab irons installed at the factory
Interior Battery powered lighting and operating end marker lights
Optional roof mounted air conditioner
Knuckle Couplers mounted at the correct height
Optional fuel oil tank details (Road name dependent)
HO GE Dash 9-44CW - DC/DCC Ready - Burlington Northern Santa Fe (BNSF Heritage I) #960
BNSF FEATURES:
High-mounted number boards
K3 horn
Front ditch lights
ATSF -Gullwing- cab
Standard brass bell
Part of the first new BNSF locomotive order to be painted in the then new official corporate colors, these -Heritage- GE units became affectionately known by railfans as -Pumpkins- based upon the Great Northern colors used on some early diesels. Some are still running today in this scheme.
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO RTR 68Ft Bulkhead Flatcar - Trailer Train TTPX #82063
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
HO 50ft Evans DD Plug Boxcar - HS #11481
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO 90ft Single-Track Railroad Deck Girder Bridge - Kit
DIMENSIONS: 12-7/16 x 1-3/16 x 1-1/2 inches (31.5 x 3 x 3.8cm)
This authentic Walthers Cornerstone 90ft Single-Track Railroad Deck Girder Bridge is typical of bridges used for decades on lines large and small. Railroad deck girder bridges are used in all kinds of arrangements across the continent. Use this kit as a stand-alone bridge supported by Cornerstone Engineered Bridge System bridge abutments or as part of a larger viaduct with piers, Steel Railroad Bridge Towers or Bridge Tower Bents. Once in place, add track of your choice (sold separately). Kit parts come molded in dark gray plastic and feature simulated steel construction.
- Part of the Cornerstone Engineered Bridge System
- One of the most popular railroad bridge designs with unlimited overhead and side clearance for passing trains
- Fits steam, diesel and modern-eras
- Available in four common lengths to match prototype practice
- Build with open or ballasted deck
- Perfect as approach spans for bigger Cornerstone and other bridge kits
- Add to new or existing scenery with Single-Track Center Piers (933-4550) and Abutments (933-4551) (available separately)
- Use with track of your choosing
- Detailed plastic parts molded in dark gray
- Use with Steel Bridge Towers and Bents (both sold separately) to model a viaduct
HO - 4750 Cubic Foot Rib-Sided - 3-Bay Covered Hopper - Goodseed & Grain #478962
HO 50ft Evans DD Plug Boxcar - USLX Tropicana #13074
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO EMD GP7 - DCC & Sound - Undecorated Dynamic - Phase III
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
UNDEC FEATURES:
Optional parts include...
Dual Leslie A-200s or single S3L horn
Winterization hatch
1200 and 1600 gallon fuel tanks
Speed recorder
Foot boards
Dual MU receptacles
-Nail-, -Firecracker-, and Sinclair -Ice Skate- antennas
In 1949 EMD unveiled the GP7, a general-purpose road-switcher that was suitable for a variety of tasks on the railroad. The GP7 went through several production variations, known as -phases- by railroad enthusiasts. -Phase II- units were typified by the addition of a box on the walkways on the firemans side, as well as the (optional) addition of dynamic brakes. This undecorated release is a good option for do-it-yourself modelers or freelancers, and comes with a selection of common, optional detail parts as well.
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO EMD SD9 - DCC & Sound - Chicago & North Western #6603
Chicago & North Western
- Rebuilt at the Oelwein Shops with chopped down nose - a first in HO Scale!
- Modified panels on side sills of locomotive
- Modified/plated over details of dynamic brake blister (Smooth plating over where grilles once were)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
N Scale AutoScenes - Shove It or Leave It
The boys had a decision to make, and they chose to take her home!
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:160 N scale models.
Figures included as shown.
HO 5/16 inch Open Web Truss - Cellform Style (2pcs)
Use for roof trusses, space frames and other modern and/or futuristic steel structures. Precision Injection Molded in Styrene Plastic. Manufactured with a special tongue and groove connection feature to quickly and accurately attain the desired length.
SCALE
ALL
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
5/16
HEIGHT IN MM
7.9mm
WIDTH IN INCHES
13/32
WIDTH IN MM
10.3mm
THICKNESS IN INCHES
7/64
THICKNESSS IN MM
2.8mm
LENGTH IN INCHES
4-1/16
LENGTH IN MM
100mm
HO - Nathan Diesel Air Horn (Brass Casting) - 3 Chime w/Mounting Bracket
HO RTR 55 F-100 Panel Truck - Bell
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
Built-&-Ready Landmark Structures - Drive-n-Dine
Assembled - 7-3/4 x 5-1/4 inches (19.7 x 13.3cm)
Drive in to this beauty and you will be transported back in time! The little diner features a huge ice cream cone on its roof, soda straw supports for the awning, two carhops, bikes, benches, a spilled trashcan and a lamppost. Includes wiring for interior light.
Flexible Vinyl Stone Trim & Abutments - Small
Product Information
Add realistic detail to HO structures with this set of Stone Trim and Abutments from Chooch Enterprises. Molded in flexible vinyl thats easy to cut with scissors or hobby knife, they can be finished with acrylic paints (sold separately) for added realism.
Tru Color Paint - Acrylic - Gold - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO ACF 89Ft F89J Flatcar w/ Deck Risers - JTTX (2000s Yellow) #601395
Red Cab & White Box
Note only one unit
HO EMD SD70ACe Diesel - DCC Ready - Norfolk Southern (Savannah & Atlanta Heritage) #1065
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
NS FEATURES:
Swapable alternate roof with leader PTC antenna array
(Also available separately [ATHG68899])
High-mounted headlight
Isolated cab
Front and rear illuminated ditch lights
Late handrails
Norfolk Southern - Heritage
In 2012, Norfolk Southern unveiled a group of 20 locomotives painted to honor their predecessor roads. In the late 2010s, the units had their roof configurations modified to accept Positive Train Control antennas. Both roof styles are included.
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
HO EMD SW9 - DCC & Sound - Louisville & Nashville (L&N Grey Scheme) #2235
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Louisville & Nashville:
Delivered in 1950
Short side handrails
Carbody style handrails
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
G (1:24) Custom Spiral Staircase (1pc)
Use in interior applications where a spiral staircase in desired. Combine with other staircases to achieve any configuration. Precision Injection Molded in Styrene Plastic
SCALE
G
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
19/64In
HEIGHT IN MM
7.5mm
WIDTH IN INCHES
1-35/64In
WIDTH IN MM
39.3mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
4-5/32In
LENGTH IN MM
100mm
HO Freight Car/Truck Loads - Steel Coil Kit (12pkg)
Product Information
Load your steel service cars with this kit. Injection molded parts capture the look of the huge coils but are easy to build. Parts for twelve coils in two sizes are included.
Norfolk Southern NS 169775 - Protect II
Built: RBLT 7-99
The Evans 100 Ton Coil Car carries coiled steel. This car is brown with brown hoods. The BNSF lettering is white on the car and white on the hoods. The model is equipped with metal wheelsets and Kadee® couplers.
Evergreen Scale Models 9009 - .005in Plain Opaque White Polystyrene Sheet (3 Sheets)
6in x 12in SHEET
HO 3-Volt Bulbs for DCC - 26mA (2pair)
Tru Color Paint 027 - Acrylic - UP Armour Yellow - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
RTR 67Ft Trinity 6351 4-Bay Covered Hopper - Cenex Harvest States Cooperative CHSX
Product Information
Expand grain traffic in minutes with layout-ready WalthersProto(R) 67Ft Trinity 6351 Four-Bay Covered Hoppers! Introduced in the early 2000s, these large-capacity cars are industry favorites for handling dired distillers grains (DDG), malt and many other food products. Other features of these HO Scale replicas include:
Limited edition - one time run of these roadnumbers!
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct 36Inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO ACF 2970 Covered Hopper - Burlington Northern (3pkg)
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons, stirrup steps and brake wheel
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Screw-mounted express-type trucks
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
Plastruct 91301 Flouresecent Styrene Sheet Blue (2pcs pkg)
0.10x7x12 inches
HO Just Plug Lighted Vehicle - Cool Convertible
Rag-top down and summer in mind, this convertible is ready for a Sunday drive!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
N Scale 3230 Covered Hopper - Trinity Industries Leasing (TILX) #30129
Features:
- All new tooling
- Ready to run
- Injection molded plastic
- Fine scale detail
- Etched metal roofwalks
- Crisp painting and printing
- Magnetic couplers
- Metal wheelsets
The Trinity 3230 Pressure Differential (PD) covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OFOX #1860
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
4 per Package
Athearn board is designed specifically for using 1.5 volt bulbs
All Scale Flexi Loco Lift - Double
The Peco double unit Flexi Loco Lift allows you to run locomotives directly on and off the track and into the holder. Works with HO, TT, HOn3, HOn30 and N Scale track and trains.
HO NSC 64 Ft 6000 Cubic Gondola HS - NMPX/ Niagara Metals #2368
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Evergreen Scale Models 4031 0.30in Opaque White Polystyrene Clapboard Siding (1sheet)
HO Scale 1951 Windsor Four Door Sedan - Unpainted and Resin Cast Kit
Hollow cast resin kit
Vacuum formed windows
Rubber tires
Poseable steering
Etched stainless mirrors
Includes driver: Bob
HO Trenton Works 6348 CN Boxcar - Canadian National (Website) #598140
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
Vallejo 73823 - Model Wash - Weathering FX - Slime Grime Light - 40mL Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Blue Grey is recommended for vehicles with a Panzer Grey base color, as well as all vehicles with a similar grey base.
HO Budd Coach w/HEP: Painted, Unlettered
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
Microscale 87-1119 HO Christmas Decals - Snowflakes and Holly
Late - Conrail Grey Quality Logo #888886
Dimension: 5-1/2 X 11 inches and stands 3-3/8 inches tall.
The Atkinson Engine Facility is modeled after an existing engine facility build in the early 1970s. The Structure is designed to allow the engines to be serviced under roof and provide office and storage space for the service attendants.
This kit is designed with cut lines on the back side of the walls so that door and window locations are optional. Kit includes doors, windows, roof vents and down spouts.e
These Kitbasher Series kits are built up from individual components from several our existing Pikestuff kits. We have done the kit bashing for you by providing you with of the parts and instructions to build a unique building from the Pikstuff inventory. These kits require some cutting of the soft plastic. Some cut lines are not provided, but cutting is easy and the instructions will guide you through each step along the way.
HO 53ft Stoughton Container - STAX (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stack-able
- Separately applied door closure rods
- Each container individually numbered
- Razor sharp printing and painting
PROTOTYPE INFORMATION:
An intermodal container (also known as a container, freight container, ISO container, shipping container, hi-cube container, box, sea container, container van) is a standardized reusable steel box. Intermodal containers are used to store and move materials and products efficiently and securely in the global containerized intermodal freight transport system. Intermodal indicates that the container can be used across various modes of transport, (from ship to rail to truck) without unloading and reloading its contents. Lengths of containers, which each have a unique ISO 6346 reporting mark, vary from 8 to 56 feet (2.438 to 17.069 m) and heights from 8 feet (2.438 m) to 9 feet 6 inches (2.896 m). There are about 17 million intermodal containers in the world of varying types to suit different cargoes!
Tangent Scale Models HO PS4750 Covered Hopper - KCS - Delivery Brown
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
KCS -Delivery Brown 12-1979- The KCS scheme is simple and eye-catching, with the tall KCS reporting marks, white circle delineators and brown matching trucks. The center sill correctly models the brake linkage access holes on one side of the car, just like the real ones. This is a big scheme, and we know our KCS customers have been a patient group. Our KCS terra cotta colored masterpieces accurately depict their Pullman-Standard prototypes.
HO RTR 45Ft Fruehauf Z-Van Trailer - Boston & Maine #250100
Detailed Information
MODEL FEATURES:
Separately applied mud flaps
Rubber tires
Fully-assembled and ready to use out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Self Adhesive Spring Grass Tufts - 4mm (100pkg)
These handy packs contain 100 self adhesive ready made tufts, to stick down wherever required on your layout or diorama.
N Scale 36ft Wide-Vision Caboose - Chesapeake & Ohio #3260
The Wide-Vision Caboose (also known as Extended-Vision Caboose) was designed with a wider cupola projecting from its sides. After World War II, train cars began to be taller and wider than their predecessors. The extended cupola assisted the trains crew in seeing beyond both the tops and sides of the train cars ahead. This caboose design saw service on most U.S. Railroads. Bachmanns Wide-Vision Cabooses are fully assembled and come in a variety of colors and road names.
FEATURES INCLUDE:
- highly detailed painted bodies with precision graphics
- blackened machined metal wheels with RP25 contours
- magnetically operated, body-mounted E-Z Mate Mark II couplers
- non-magnetic blackened brass axles with needle-point bearings
- Celcon trucks
- added weight for optimum tracking performance
- N scale 1:160
HO 19,600 Gallon Tank Car - Tate & Lyle (Repaint) #51228
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Date: BLT 3-98
Large Brass Telescopic Tube Assortment (3 pkg)
K&S Engineering Telescopic Tubing Packs are perfect for creating tapered poles, sliding parts and more. Available in 12inch long section packs, individual tubes have a .014 wall thickness and come in a range of telescoping sizes. Telescopic Tubing Packs are available in Brass, Copper and Aluminum in various size ranges.
12inch Long x .014inch thick - Brass
Outside Diameter: Varies from 9/16inch to 5/8inch
This package contains the following: 9/16 in., 19/32 in., 5/8 in. O. D. x 0.014 in. Wall Thickness x 12 in. Length
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #1122
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
85ft General American G85 Flatcar - Trailer Train - New Haven #16034
Product Information:
Limited edition - one time run of these road numbers
Prototypes handled trailers and containers from 1961 to mid-1980s - used for general service loading into the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in up or down position or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
33In turned metal wheelsets
Proto MAX metal knuckle couplers
Add more realism in minutes with SceneMaster trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24In
Alco RS-11, 2nd Run - Diesel Locomotive - DCC Ready - Duluth, Winnipeg & Pacific - Delivery #3600
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO Ready Made Realistic Trees Value Pack - Deciduous Fall Colors 3Ft-5Ft Tall (14pkg)
HO scale CIMC 53Ft Cargo Container Marten Set #2
53Ft CIMC Features:
-Side corrugations with an 8-55-8 arrangement
-Front wall with 10 vertical corrugations
-Roof with 6-54-6 corrugations
-1-3-1 beveled doors
-Placard Holders on front wall, sides and door
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - DEAX #11344
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 53ft Stoughton Containers - Hub Group, Set #1 (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Separately applied door closure rods
- Each container individually numbered
- Razor sharp printing and painting
EMD SD70ACe,w/DCC Ready - Progress Rail #4834
Detailed Information
NEW FEATURES FOR ALL SD70ACES IN THIS ANNOUNCEMENT:
The effort continues to enhance Athearn Genesis models per customer requests and feedback. Moving forward, the EMD SD70ACe will posess the following features:
All lighting now feature new LEDs
Rubber MU hoses for durability
PRLX FEATURES:
Ex CSX units
Cab high mount headlight
Nose door without window
Rear ladder located conductor side
#4831:
Inverter cabinet with solid X-panel compartment
#4843:
Inverter cabinet with X-panel compartment and vertical grille
SD70ACE AND SD70M-2 SPECIFIC FEATURES
New for the SD70ACe and SD70M-2, LED lighting
Correctly-sized illuminated ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or -tube- style mounting bracket
GPS Domes or PTC antennas per prototype
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Jacking pads per prototype
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
HTCR or HTSC trucks per prototype
Non-sound QuickPlug equipped with NEM 21-pin DCC plug
McHenry scale knuckle spring couplers
Minimum radius: 18inch
Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of -In Service- equipment; -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per road number matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
HO 40Ft Fruehauf Fluted Side Volume Van - Pacific Intermountain Express PIE #V4472
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
AK Interactive Heavy Chipping Acrylic Fluid
Odorless fluid to create heavy chipping effects
Odorless acrylic fluid to create Scratches Effects.
Odorless and effective acrylic product to replace hairspray and to do effects of wear and scratches on our models. First we paint our model with a dark color or the color that we want to see under the scratches. Afterwards, we can apply directly from an airbrush giving a generous coat to our model. Afterwards, using an acrylic paint, we can make small damage effects. Dampen the surface using a brush and then do the effects using a sharp tool or the same brush. Don’t gamble with any old lacquer and be confident of the result on your model with this new product.
AK product is the original and first in the market
HO 17,360 Gallon Chlorine Tank Car HOKX
FEATURES:
-Brake rigging molded separately
- Scale handrails
- Metal safety bars, tank fittings and safety placards
- AccuMate couplers
- Screw-attached 100-ton roller-bearing trucks for added reliability
- Accurate painting and lettering
- Brake wheel chain
HO 53ft Jindo Container - EMP ex-FEC Set #1 (3pk)
(#968376, 968384, 968399) (BLUE/YELLOW)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting
HO 40ft Corrugated LC Container - OCL #2 (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered
#5 Universal Magne-Matic(R) Couplers -with Draft Gear Box 2 Pair
The most popular Kadee(R) coupler, fits most HO equipment. Metal coupler with insulated plastic gear box.
SceneMaster - Static Grass Flocking - Yellow 1/16inch 1.5mm Fibers
Model more realistic grass in minutes in any scale
Great for lawns, farm fields, railroad and highway right-of-way and more
Six realistic colors - made exclusively for Walthers by Noch
Easily applied with Noch Static Grass Applicators, Grass Dispenser Bottle or Gras-Master 2.0 (each sold separately)
3-1/2 Ounce 100g reclosable plastic bags
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Early CWSX #140028
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
GP40-2 - DCC & Sound - RDG #3671
Detailed Information
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; were excited to include new features often requested, to the GP40-2 and upcoming Genesis models.
RDG FEATURES:
Chickenwire radiator grills
Front & rear drop steps
Front medium snowplow, rear footboards
Sinclair anrenna
Leslie S3L horn
Cab rain gutters
2600 gallon fuel tank
Road numbers on top of cab
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
PROTOTYPE SPECIFIC INFORMATION
By the early 1970s, many first generation diesels were reaching the end of their service lives. The most common replacement locomotives became the GP40-2. EMD began production of the 16-cylinder, turbocharged, 3000 horsepower engine in 1972. These locomotive were developed for service where higher horsepower and faster service were preferable. A major feature for the GP40-2 was the introduction of the -dash 2- modular electrical cabinet. For more than 40 years, the GP40-2 has worked main line freights, locals, switching jobs, yard service, and helper service. Many remain in service today.
GP38-2 EMD - DCC/Sound - P&LE #2059
Detailed Information
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; were excited to include new features often requested, to the GP38-2 and upcoming Genesis models.
P&LE FEATURES:
Ex-Rock Island phase II with narrow spaced radiator fans and corrugated radiator grilles
Non-dynamic brake hatch
Early flush exhaust
81inch nose with ratchet brake
5 chime horn
Early ECAFB
Underframe mounted bell
Detailed 2600 gallon fuel tank with vertical sight glass
Blomberg-B trucks with leaf springs and Hyatt bearings
Salem air filter with piping
Extra jacking pads next to front and rear pilot step wells
Firecracker antenna
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO PC&F 5241 CUFT - Boxcar - Saratoga & North Creek (SNC) - Single Car #3370
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
N Scale Long Barrel Ore Hopper - CN Mineral Brown #346558
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO EMD SD70M-2 Diesel - DCC & Sound - New Brunswick Southern Railway (Eastern Maine) #6404
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
NBSR FEATURES:
Former NS units
Front and rear ditch lights
PTC antennas
The New Brunswick Southern Railway is a Canadian short line which, combined with its sister company Eastern Maine Railway, connects Saint John, New Brunswick, with Brownville Junction, Maine. A sister company, Maine Northern Railway operates a separate 258 mile line. In 2021, a group of six former Norfolk Southern SD70M-2 locomotives arrived on the property. Painted green and yellow, each component roads
name is on two locomotives; all are owned by the New Brunswick Southern.
ROAD NUMBER SPECIFIC FEATURES:
#6401 New Brunswick Southern lettering
#6402 New Brunswick Southern lettering
#6403 Maine Northern lettering
#6404 Maine Northern lettering
#6405 Eastern Maine Lettering
#6406 Eastern Maine Lettering
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO ET44 Tier 4 - DCC & Sound - Kansas City Southern #5011
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO USRA Single-Sheathed Boxcar: N&W
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO 50ft PS-2 CD 4427 Covered Hopper - Milwaukee Road #98710
Add a signature car to your covered hopper fleet with the Walthers Mainline 50ft Pullman-Standard PS-2 CD 4427 3-Bay Covered Hoppers!
Fully assembled and finished in a variety of colorful schemes perfect for 1960s to early 2000s layouts, features include:
-Limited edition - one time run of these car numbers!
-Prototypes handled all types of grains, feed and similar loads
-Matches prototype dimensions
-See-through running boards
-4-3-4 exterior rib pattern
-Bottom outlet gate details
-Placard name plates as appropriate
-Correct 36in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
RS-18u, DCC & Sound - Western NY & Pennsylvania #417
Era:2018-Present
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
HO GP38-2 - DCC/Sound - EMD Lease #825
EMDX FEATURES:
- Built as Penn Central
- Lighted class lights
- Lighted number boards
- Correct horn per road number
- Short fuel tank
- Sinclair antenna
ROAD NUMBER SPECIFIC FEATURES:
#788
- Ex-CR #7988
- mid phase w/ chicken wire grilles
- Operation Lifesaver
- Leslie 3-chime horn
- front small EMD plow
- rear Weed-cutter plow
- unique scheme
#813
- Ex-CR #8013
- mid phase w/ chicken wire grilles
- 4-stack exhaust
- Nathan 3-chime horn
- front small EMD plow
- rear Weed-cutter plow
- black fuel/air tanks
- small cab numbers
#825
- Ex-CR #8025
- mid phase w/ chicken wire grilles
- Nathan 3-chime horn
- front Weed-cutter plow
- maroon fuel/air tanks
- large cab numbers
- named The Kristen
GP38-2 SERIES LOCOMOTIVE FEATURES:
- Operating Class Lights
- Operating Number boards
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
HO 40Ft Refrigerated Container - CSAV Set #1 (3 pkg)
Road Numbers: CRLU 7253254, CRLU 7253275, CRLU 7253296
(White/Blue/Red)
MASTER MODEL FEATURES:
40-foot High-Cube Refrigerated Container
Composite materials sandwich-sides design
Detailed picture window refrigeration unit with separate parts
ISO Type 45R1
Five hinge / four bar doors with OUT style handles
Each set comes as a 3-pack
Juneco Scale Models Stack of 3 Sacks (6/pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .080In x 14In (4 pcs pkg)
HO EMD GP40 - DCC Ready - Western Pacific (Zephyr) #3514
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO G2.0 SD60M Tri-Clops - DCC & Sound - Ex-SOO CP #6062
SOO FEATURES:
Large EMD plow w/red edges
Cab door without window
Winterization hatch
Leslie 3-chime horn
Roof mounted strobe (operates in DCC)
In 1989, Soo Line purchased 5 SD60Ms from EMD, numbered 6058-6062. They were all painted in this attractive and bright -Candy Apple- red scheme, and could be seen all over the system. Soo was known to run these as a single unit in hot-shot TOFC trains as in the image below. After Soo Line was folded into the CP Rail System, these units remained in Soo colors for a long while before finally being repainted in CP Rail colors.
ROAD NUMBER SPECIFIC FEATURES:
#6058
As delivered -Candy Apple- scheme
#6060
As delivered -Candy Apple- scheme
#6062
Early patch
Soo features
added front ditch lights
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Warranty service available
Minimum radius: 18inch Recommended radius 22inch
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
Animated roller bearing caps
SOUND-EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO CP Rail - Passenger Cars (1969-1978) - Waterslide Decals
HO Duplex Sleeper - Amtrak - Phase I #2401
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low profile? Barber S-2-A with Timken rotating caps
Wheels: CNC-Machined 36in Wheels
Detroit Toledo & Ironton (DTI) Delivery 1970 Magenta shows off one of the most-requested paint schemes for the Tangent Greenville 86ft Box Car System. We appreciate the patience of DT&I modelers, as we wanted to get this car right with the correct 1970 Greenville body with accurate DT&I Magenta paint and lettering. This Magenta DT&I group totaled 54 cars ? It was also the first group to be delivered for use in the new Ford Brownstown Parts Distribution facility pool. Yes, these cars were pooled, so that means these beautiful Magenta 86ft giants served Ford US Parts Depots coast to coast in the Ford BRO pool lanes. Note the prototype photo on our website that shows a DT&I BRO car behind a GN painted, BN-restenciled SD45 presumably photographed on BN headed to Seattle. The DT&I cars feature the distinctive Brownstown body style, with extra vertical rivet rows at the ends of the side sheets. An accurate End-Of-Car Cushioning underframe shows off the 100-Ton Low profile Barber S-2-A trucks, 36in wheels and Timken rotating caps.
HO RTR 68Ft Bulkhead Flatcar - Canadian National CN #622378
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
Expand container traffic on your 1960s and 70s era HO layout with this series of authentic models from - SceneMaster, featuring:
- Standard end-door and right-side door versions as appropriate
- Authentic rivet, door latch and hinge details
- Colorful period schemes
- Perfect period loads for WalthersMainline G85 and 60ft Pullman-Standard VTTX container flatcars (each sold separately)
N Scale Modern Railings for Overpass (4pk)
The Rix Modern Highway Overpass is modeled after the bridges built today to span over railroad tracks. This style of bridge is typical of most new construction and is used all over the country. The Rix Modern Highway Overpass consist of 50 foot spans which interlock together so that any length bridge can be built.
Kit Includes: Modern Railings Only. 4 per package
RTR 57Ft trinity 3-unit Spine Car - BNSF #300573
Expected time of arrival : April 2021
MODEL FEATURES:
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Precision die-cast metal spine structure
Etched metal walkways
Separately applied brake piping
Highly detailed customer applied trailer hitches
53Ft trailer and container are perfect loads for the 57Ft spine car
Fine ladder detail
Weighted for optimal performance
33Inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers installed
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Machined metal wheels
Minimum radius: 20Inch
PROTOTYPE AND BACKGROUND INFO:
Intermodal transportation requires specialized rail equipment which is, on occasion, too specialized. To allow more flexibility in loading containers and trailers at terminals all-purpose spine cars were developed. These cars can be configured to allow loading of trailers of varying lengths, from 28Ft pups to 53Ft high capacity units. With the trailer hitches collapsed containers can also be loaded. 40Ft, 45Ft 48Ft and 53Ft containers call all be accommodated on these cars as well as 20Ft models provided they are mounted to a chassis.
The prototype for our model is based on a Trinity-built car owned by the TTX Company. These 70-ton cars (TTX class RAF30A) numbered TTRX 360817-361116 first appeared on the rails in the late 1990s. The Athearn model is faithful to the prototype allowing modelers to load a variety of trailers and containers.
Specifications
PROTOTYPE MANUFACTURER: Trinity
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990s+
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0018
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Class D10k 4-6-0 - DCC & Sound - Canadian Pacific #1063
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
Figurines - Ordinary People (6)
HO Single-Track Random Stone Tunnel Portal - 5 x 4-3/4 Inches (1pc)
N Scale 50ft Steel-Side Gondola - BNSF (4pk)
(With Family Foam Nest)
Rd#512308, 512311, 512326, 512356
Juneco Scale Models CN SW-1200RS Winter Hatch
HO Slab-Side Covered Hopper - Toronto, Hamilton & Buffalo TH&B #2839
8 Hatch
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
HO RTR 68Ft Railgon Gondola - Railgon GNTX #290058
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO ALCo RS-3 - DCC/Sound - Delaware & Hudson #4075
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
Fox Valley Models N Bi-level Auto Rack
Conrail
Features:
Die-cast underframe
Finely Molded Details
Etched Metal Panels
Formed Wire
Sharp Painting & Lettering
Multiple Road Numbers
Die-Cast Underframe
Metal Wheelsets
Micro-Trains Trucks & Couplers
EMD F3A w/ DCC & Sound - New York Central - Lightning Stripe #1621
Completely assembled with a powerful, smooth drive, wire handrails and grab irons.
HO 48ft Galvanized Steel Grain Bin - Kit
(Wide - 4 inch Corrugation)
Corrugated steel grain bins are a staple in any agricultural setting, placed on farms, elevators, industries, and beside railroad tracks. Used with a variety of farm commodities, these bins provide a safe, dry place to store that commodity until it goes to market.
With several styles to choose from, these grain bins will look right at home on your layout. They feature prototypical corrugations, realistic galvanized steel appearance, various side sheet heights, and a variety of diameters.
Narrow corrugation bins have corrugations spaced a scale 2.66 inches and the rings are 32 inches tall. Wide corrugation bins have corrugations spaced 4 inches apart with 44 inch tall rings.
All bins are easy to assemble - just stack the rings, glue them together, attach the roof and you are done! Every ring comes as one solid piece, so no time consuming and messy assembly of individual side sheet pieces to create each ring, saving you time and frustration!
What size bin will fit your space? Try our grain bin size calculator or printable template.
https://www.iascaled.com/store/GrainBinSizeCalculators
https://iascaled.com/docs/ho-bin/GBM-HO.pdf
HO Elevator Add-on Silos - Kit -
This kit measures: 9 x 4-1/2 x 9 in (22.8 x 11.4 x 22.8cm)
This Cornerstone structure kit provides parts to build four matching concrete silos for the ADM(R) Grain Elevator (933-3022 sold separately) and lengthen the corrugated metal headhouse.
HO 50ft Covered Gondola - NKP #44814
MODEL FEATURES:
- 70-ton Roller Bearing trucks
- Removable cover
- Separately-applied brake wheel
- Weighted for optimum performance
- 33 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Body-mounted McHenry operating scale knuckle couplers
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inch
PROTOTYPE AND BACKGROUND INFO:
Gondolas are low-sided railroad cars that are used for hauling bulky loads that don not need protection from the weather. The Roundhouse 50ft gondola is representative of larger cars that began appearing on the rails in the early 1950s, and many survive today working for modern roads and contractors.
HO GE Dash 9-44CW - DCC & Sound - Burlington Northern Santa Fe (BNSF Wedge) #4433
BNSF FEATURES:
High-mounted number boards
K3 horn
Front ditch lights
ATSF -Gullwing- cab
Standard brass bell
Part of BNSFs order in 1999, these were originally painted in the -Heritage 2- scheme from the factory. Over time with normal wear and tear, these units paint began to fade. As they got outshopped for major repairs, some were repainted into BNSFs current -Wedge- scheme. It was also common to see different variations of paint and parts used. Air conditioners and antennas were commonly changed out over time as seen on other equipment. We offer these variations based on collected research photos.
ROAD NUMBER SPECIFIC FEATURES:
#4433 Standard large dome antenna
#4437 Large dome antenna with dual -Skate- style antennas
#4484 Standard large dome antenna
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO SD38 - DCC/Sound - CanDo Rail Services #5201
CCGX FEATURES:
CanDo Rail Services is a contracting company based out of Brandon, Manitoba, Canada. They preform track maintenance for large industries, operates as a shortline, and contracts switching services in Ontario, Manitoba, and Alberta Canada.
ROAD NUMBER SPECIFIC FEATURES:
#5201
- Ex: DMIR. Short fuel tank
- triple clasp brakes
- M3 horn
- UP style plows
- all-weather windows
- ditch lights on both ends
- Classified as a SD38AC
#5202
- Ex-BLE. Medium fuel tank
- high-mount truck brakes
- M3 horn
- UP style plows
- all-weather window
- ditch lights on both ends
- Classified as a SD38AC
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
Limestone Ballast - Matches Unitrack Roadbed - 7oz (200g)
Ballast is made from real pulverized limestone and matches Unitrack System roadbed.
Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- IC
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Illinois Central (IC) -Delivery 2-1970- is a hot car, no matter how you look at it. That orange paint
coupled with the sharp black and white split-rail logo is one of the most iconic schemes for that era. The IC cars feature their as-built 1970 appearance that includes Gypsum crossover platforms, Ajax brake hand brake housing, Greenville-applied tack board locations and that beautiful End-of-Car Cushioning underframe setup. The paint, lettering and graphics are truly Tangent Accurate from the large, centered Illinois Central lettering down to the distinctive IC-style dotted return route box with instructions to send the car back to the GTW in Flint, Michigan. 70-Ton Trucks with 33in wheels and rotating Timken roller bearing caps finish off this Mainline of Mid-America offering. Our IC masterpieces are available in four different numbers.
HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Mineral Red) #5108
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
N Scale Wide-Vision Caboose - Delaware & Hudson #35717
The Rapido Trains N scale Wide Vision Caboose features:
Super-detailed underbody including all separate air and brake piping
Free rolling Barber-Bettendorf caboose trucks
Detailed interior
Full end detail, including uncoupling levers
Separate metal grab irons installed at the factory
Interior Battery powered lighting and operating end marker lights
Optional roof mounted air conditioner
Knuckle Couplers mounted at the correct height
Optional fuel oil tank details (Road name dependent)
RS-18u, DCC & Sound - Ontario Southland #181
Era:2006-Present
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
HO 53Ft Gunderson Husky-Stack Well Car & Containers - TTX (Patched Logo) #645259
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
Alco RS-11, 2nd Run - Diesel Locomotive - DCC Ready - Maine Central - Pine Tree #802
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
N Scale Double-Track Crossover - Left Hand
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly.
The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
Feeder Tracks, Double Crossover and all turnouts are factory-wired for plug-and-play operation.
UPS Freight - Grey, Gold, Brown
Expected Delivery: February 2020
Product Information:
Licensed replica of popular International(R) trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled & painted
Die-cast metal and plastic parts
This medium-duty truck line was introduced in the late 1980s. Powered by a Navistar DT inline six-cylinder diesel engine capable of up to 350 horsepower, the 4900 series has been a great starting point for a wide range of commercial vehicles, including delivery vans, single- and dual-axle semi tractors, as well as fire apparatus and other government applications.
Metal Rusted Garbage Cans - Pre-painted
HO SD40T-2 - DCC & Sound - D&RGW (Rio Grande) #5405
ETA: May 2023
Detailed Information
DRGW FEATURES:
88inch nose with brake wheel
Large Sinclair antenna
Relocated P3 horn
Tall front ditch lights
Stratolight Beacon
Small EMD plow
Extended range dynamic brakes
The 1990s was an interesting time for some railroads. An example of this would be SP-era Rio Grande SD40T-2s. SP has always been known for having a plethora of lights on their diesels. During this period, Stratolight beacons and front ditch lights were added to many DRGW locomotives. With the combination of the factory installed nose Mars lights, these were affectionately nicknamed as -xmas tree- lights by some railfans.
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Photo-etched windshield wipers
Separately applied air tanks
LED Lighting
HTC truck sideframes
Welded ECAFB
All-wheel electrical pickup
See-through dynamic brake fans
Separately applied wire grab irons
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox specific for the tunnel motor
Speed recorder attached to appropriate axle per prototype
McHenry operating scale knuckle couplers
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Fully assembled and ready-to-run
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO EMD SW9 - DCC & Sound - New York Central (NYC As Delivered) #8925
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO 89ft Thrall Bi-Level Auto Carrier - CSX #150724
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
HO 40ft Corrugated Container - CMA-CGM (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered
HO Brookhill Farm Dairy - Kit
Product Information
The Walthers Cornerstone HO Scale Brook Hill Farm Dairy is a three-story brick-and-stucco factory building that has plenty of uses on any steam or diesel-era layout. Featuring loading docks for railroad and truck shipments this classic building also includes colorful sign decals and milk cans for added dock detailing. Parts come molded in three colors plus clear plastic. Brook Hill Farm Dairy is one of many Cornerstone, Trainline and SceneMaster HO Scale structures and outbuildings.
Classic trackside factory building
Three-story brick and stucco construction
Loading dock for freight cars and trucks
Fits steam or diesel eras
Includes realistic decal signs
Easy-to-build plastic kit
Molded in three colors plus clear glazin
The finished Brook Hill Farm Dairy model has a footprint of: 7-3/8 x 7-1/4inch (18.7 x 18.4cm)
1:87 CAT 12M3 Motor Grader
Details:
1:87, Wheel Loader
Dimensions:
4 x 1½ x 1⅝ in
103 x 37 x 42 mm
Built-&-Ready Landmark Structures - Deuces Bike Shop
Assembled - 5 x 6 inches (12.7 x 15.2cm)
Spice up the seedy side of your layout town with historical flare. This fully assembled structure represents a nostalgic easy rider setting with incredible detail. Exterior details include a weathered metal roof and siding, signs and decals, an old pop machine and a fenced yard loaded with a junkyard dog, old bike parts and other details.
HO EMD SD9 - DCC & Sound - Chicago, Burlington & Quincy #837
-yellow frame
Chicago, Burlington & Quincy
- Phase IV (First time for a plastic model!)
- Higher short hood with a corresponding cab height
- Cornered-off section on the long hood behind the cab
- Two 48inch radiator fans as opposed to the normal (four) 36inch fans
- Conduit pipes were removed from the top of the radiator
- No ladders on the short hood end
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO MLW M420 MR20b - DCC & Sound - Canadian National (Stripes) #3539
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO GP38-2 - DCC & Sound - Missouri Kansas Texas (MKT) #318
Detailed Information
MKT FEATURES:
Offered by popular demand
Newer -simplified- scheme
Mid-Phase body
Leslie 3-chime horn
3200 gallon fuel tank
88inch nose
Correct paint scheme and colors
Blomberg B trucks
Xenon clear strobe (light effect with DCC)
To try and keep painting costs down, MKT adopted a more simple version of this scheme by eliminating the yellow stripes on the top of the cab.
ROAD NUMBER SPECIFIC FEATURES:
#313
Non-dynamic
Yellow safety frame stripes
MU catches on both front and rear pilots
Road number on sides of long hood
#318
Extended range dynamic brakes
No frame stripes
MU catches on rear pilot
Road number on sides of cab
#320
Extended range dynamic brakes
Yellow safety frame stripes
MU catches on rear pilot
Road number on sides of cab
GP38-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO 85Ft General American G85 Flatcar - TTX (Brown) #300129
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
HO GMD SD40-2W - DCC & Sound - CNNA (Map w/ Web Address) #5339
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. DCC with Sound version features LokSound V5 decoder.
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
60ft Pullman-Standard Flatcar - Ready to Run -- OTTX #90200 (Farm Machinery Service; brown, yellow TT Logo)
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO RTR 53Ft Jindo Container - FROMX (3pkg) #2
MODEL FEATURES:
Newest vertical rib front
Easily stackable
Separately applied door closure rods
Fully assembled
Each container individually numbered
Razor sharp printing and painting
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Indiana Harbor Belt #819003
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Thru Girder Bridge 50 Ft Double Track
Easy to assemble, injection molded, pre-colored styrene kit.
Bridge can be modeled with square or rounded girder ends.
Simulated concrete desk included allows open deck or ballasted deck construction.
Superb detail includes lateral bracing, cross beams, stringers, and rivet plates with extensive detail.
HO Code 83 Bridge Flex-Trak included.
HO NSC Ballast Hopper - Union Pacific (Late) #919170
1990s+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
Tru Color Paint - Acrylic - Engine Black - 1oz
Kit - 150ft Scale w/4 Piers
The Rix Wrought Iron Highway Overpass for HO scales is modeled after the bridges built to span over railroad tracks. The Rix Highway Overpass Wrought Iron consist of 50 foot spans which interlock together so that any length bridge can be built. The piers are designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy.
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
HO MLW M420 - DCC & Sound - Canadian National (North American Scheme) #3567
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO Grape Vines
A fun addition to a garden and a must have for a model winery, these SceneMaster grape vines feature realistic vines and foliage. Stands about 2.2cm tall.
HO Scale H1b Hudson Steam - DC/DCC Ready - Canadian Pacific (Delivery) #2816
-Early walkway w/smoke deflectors
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO Intermodal Yard Pavement - Kit
DIMENSIONS:
Landing Pads: 15 Pieces 8-15/16 x 3-3/16 inches (22.7 x 8cm)
Roadway: 5 Pieces 8-15/16 x 1-15/16 inches (22.7 x 4.9cm)
Crane-way: 5 Pieces 8-15/16 x 1-1/8 inches (22.7 x 2.8cm)
Concrete Grade Crossing (matches 933-4121, also available separately):
Crossing Center: 2 Pieces 9 x 1/2 inches (22.8 x 1.2cm)
Crossing Edges: 4 Pieces 9 x 1/4 inches (2.8 x 0.6cm)
FEATURES:
- Must-have for container and piggyback yards
- Great for modern diesel-era layouts
- Modular design allows easy expansion by combining with additional kits, sold separately
- Realistic drainage detail
- Molded in concrete gray
- Includes Modern Concrete Grade Crossing sections that match 933-4121, sold separately
- Easy-to-build plastic kit
HO Intermountain 4-Panel Coalporter, Canadian National
CNA Website scheme
Features:
Sharp Painting and Lettering
Prototype Accurate Paint Schemes
Multiple Road Numbers
InterMountain 100 Ton Trucks with 36in Metal Wheelsets
Metal Knuckle Couplers
Plaster Cloth - Triple Roll (1 roll/pkg - 8 in x 15 yd, 30 ft2)
Triple Roll - Get three times as much. Perfect for large projects. Packaged in resealable bag.
Plaster Cloth is the easy, convenient method for modeling lightweight land contours and terrain base. The plaster-coated cloth creates a durable hard shell, designed to accept Earth Colors Liquid Pigment, paints, plaster castings and landscape materials easily, with realistic results. Use to fill seams or gaps around rocks, tunnels, and terrain to blend terrain features.
Give any construction site a lift with this SceneMaster 2-Axle Truck Crane on the job! The kit features:
Designed for easy assembly - illustrated step-by-step instructions
Must-have equipment for modern industrial, construction or maintenance-of-way fleets
Build for on- or off-road work with telescoping boom and positionable outriggers
Positionable crane can be rotated 360 degrees, boom can be raised and lowered
Great for lifting chores at the Cornerstone Skyscraper Construction Site (933-3761, sold separately)
Molded in 2 colors and clear plastic
Photo shows assembled model.
HO MLW M420 - DCC & Sound - Minnesota Commercial Railway #35
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO 19,600 Gallon Tank Car - GATX (MCP) #73540
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Date: BLT 3-98
Ballast Bag - Fine Iron Ore (21.6 in3)
Realistically model railroad track, crushed rock, and stones.
Easy to use and colorfast.
B-100-40 Boxcar: SP/UP Shield Repaint - Single Car #656318
Detail Variations:
6-pack includes the following numbers:
#656293
#656318
#656319
#656389
#TBA
#TBA
Our B-100-40 model features the following details:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Genuine Kadee #158 Whisker couplers
Newly tooled trucks with turned metal 36 Inch wheels
Separate door rods and door tracks
Road number specific number patches
Separately applied coupler cut levers
With this enamel product the modeler may easily represent streaking effects left by salt on vertical surfaces or horizontal areas of any ship. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look
HO 59Ft Cylindrical Hopper - Canadian Wheat Board CNWX #106614
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
One time run of these roadnumbers, order now - limited quantity available
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
50Ft Berwick Box Car - Detroit Toledo and Ironton
#18852
MODEL FEATURES:
Ready-To-Run
Full under body detail with brake rigging
Overhanging X-panel roof
Non-terminating sine wave ends
Separately applied wire grabs
Detailed end ladders and brake gear
Accurate painting and printing
Blackened metal wheels
AccuMate couplers
Micro Coat Flat - 1 oz. bottle (Clear Flat finish)
The Micro Coat finishes are more than just a pretty look. This is one tough finish and a real breakthrough in a modern formulation of water reducible acrylic resin. For models that get a lot of handling this is the answer.
Ortner 5-Bay Rapid Discharge Hopper - OMAX (5-pack)
MODEL FEATURES:
-Removable load
-Decorated models fully-assembled and ready to run out of the box
-Highly-detailed, injection-molded body
-Separately applied wire grab irons on side ladders
-Separately applied brake wheel
-Body mounted McHenry operating scale knuckle couplers
-Minimum radius: 18inch
-All 5 packs come with unique road numbers
-Machined metal wheels with RP25 contours operate on all popular brands of track
-IPSX, OMAX, and SMEX are coal service cars. CBNS, HLMX, and ITGX are sugar beet service cars
-Sugar beet service cars will include newly-developed etched upper extensions included in poly bag
PROTOTYPE AND BACKGROUND INFORMATION:
The unit train concept was pioneered by Ortner Freight Car Co. in 1960 as an effort to streamline bulk cargo unloading. Robert Ortner, developer of the rapid-discharge door system, targeted unloading a train of rapid discharge cars in 30 minutes to an hour. Previously this same task would take four hours or longer. Unit trains shuttle back and forth between mines and power plants eliminating dwell time in yards. The concept has become ubiquitous to the modern railroading scene. In more recent years many of these cars have been converted to sugar beet hauling service and had capacity extensions installed.
N Scale PS-2 2893 3-Bay Covered Hopper - Chessie B&O #628038
MODEL FEATURES:
Separately applied round roof hatches, brake wheel, and walkway
Separately applied outlets and detailed braces
Body-mounted McHenry operating scale knuckle couplers
Machined metal wheels with RP25 contours operate on all popular types of track
Minimum radius: 11inch
HO 37ft General American Meat Reefer - American Stores #1919
Rapidos 37ft Meat Reefers Feature:
- Complete underbody with all piping
- Super-detailed Barber S-1 trucks
- (Insulated turned blackened metal wheelsets)
- Accurate roof hatches and hardware
- See-through brake platforms
- Separate grabs, ladders and roofwalk
- Accurate paint schemes
- Multiple car numbers per scheme
- Factory-installed Macdonald-Cartier couplers
- Available in singles or multi-packs.
HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) #485424
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
N Scale 48Ft Ribbed Side Container - Canadian National (Laser Scheme)
Product Information
Modernize your HO intermodal operations in minutes with these SceneMaster Containers, featuring:
Improved door latch detail
Great detail for terminals and industrial scenes
Realistic loads for any well car
Ready to use
Hob-e-Tac Adhesive - 2 fl oz
Hob-e-Tac is a multi-purpose, water-soluble, high-tack adhesive. It is perfect for attaching clump-foliage to tree armatures. Also, use to glue field grass and fine-leaf foliage to your layout.
Bob Smith Industries Quick-Cure 5 Minute Epoxy (4.5oz)
This is a nine ounce package of Bob Smith Industries QUIK-CURE 5 Minute Epoxy. QUIK-CURE 5 Minute epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE shouldnt be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE is the only BSI epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE can be handled after 15 minutes. Full strength is reached in 1 hour.
Testors - Spray Enamel - Gloss Dark Red
Testors 3 oz Aerosols come in over 50 popular colors and 9 different finishes. They offer superior adhesion to a variety of surfaces including wood, metal, glass, terra cotta, ceramic bisque and more. They are fast drying and easy-to-apply which means quick project completion.
HO G43A Repaint 1980 Mill Gondola - Conrail (CR) #576210
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -G43A Repaint 1980- in the classic Conrail red paint scheme. This series represents the former PC-painted G43A series. Conrail retained the placards that were present on these original PC-painted cars from 12 years before. The Conrail reporting marks and road number are on the same three placards that PRR used, following the PC practices. Conrail then made new placards for the Conrail can opener logo and the two COTS panels, making a total of six placards on this model, on each side! The 100-Ton Barber S-2 trucks are equipped with rotating -Timken- caps and feature CR reporting marks and car number stenciling on the truck side frame, just like the prototype. This Conrail model is a true mill gondola, meaning it is not designated for coil steel loading; it has a steel floor. These Conrail mill gondolas feature details appropriate for the 1968-built car. SKUs 01 through 06 have a shop date of 5-80, while SKUs -07 through -12 feature an 8-80 shop date.
1:32 ABS LADDER (2pcs)
Use as straight ladders commonly found in numerous industrial, commercial, and residential applications. Note, in most industrial applications using a fixed ladder, a cage is also desirable. See CL Safety Cage & Ladder Sets. Precision Injection Molded in Gray ABS Plastic.
Ideal for all outdoor or professional model construction where model life is critical.
SCALE
1:32
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/8In
HEIGHT IN MM
9.5mm
WIDTH IN INCHES
39/64In
WIDTH IN MM
15.5mm
LENGTH IN INCHES
15In
LENGTH IN MM
375mm
HO 40ft 16K Gallon Tank Car - Corn Products Corp/CCLX #1316
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 53Ft Gunderson Husky-Stack Well Car - Arkansas & Oklahoma AOK (2pkg) #73519, 73623
Does not include containers
Road Numbers Include:
73519
73623
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
HO 60Ft Gunderson 7538 Single Door Boxcar - BNSF #761467
MASTER MODEL FEATURES:
- All New Tooling!
- Separate ladders, hand brake and door rods
- Door stirrup, unique to the 7538
- Single or double plug door as per the prototype
- Roof with 3 Stanray X-panels and 3 diagonal center panels
- Brake arrangement offset to A end of body
- Crisp, accurate lettering and paint details
HO GATC 2600 Airslide Hopper - Santa Fe #310015
MODEL FEATURES:
- Three different body styles
- Rectangular or oval shaker brackets
- See-through metal roof walk
- Highly detailed, injection molded body
- Fully-assembled and ready-to-run out of the box
- Detailed underbody including outlet piping
- Gravity or gravity-pneumatic outlets
- Roller bearing or Bettendorf trucks
- Factory installed wire grab irons and brake piping
- Coupler cut levers and train air lines
- Machined metal wheels
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Operates on all popular brands of track
- Minimum radius: 18 inch
HO GE C30-7 - DCC & Sound - ATSF Santa Fe (Early Scheme) #8025
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
Acrylic Glossy Colors - Clear Red - 3/4oz (23mL) Bottle
X-27
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO NSC 60ft Ingot Flat Car - HPJX National Steel Car
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
Ultrafine high quality pigment for modelling.
The definitive collection of pigments designed exclusively for modelers. A series of basic necessary and frequently used colors mixable between. AK Interactive pigments are much finer than any of the existing products on the market and contain nearly 3 times the quantity of other leading brands at a lower price .These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve. Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Seaboard Air Line - Delivery #102
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
43/64 inch Open Web Truss - Pratt Style (2pcs)
Use for roof trusses, bridges, conveyors, space frames and other steel structures. Precision Injection Molded in Silver Styrene Plastic. Manufactured with detail on one side only. If structure will be visible from both sides, it may be desirable to cement two pieces back-to-back for realism.
SCALE
ALL
MATERIAL
STYRENE
COLOR
SILVER
HEIGHT IN INCHES
43/64
HEIGHT IN MM
17.1mm
WIDTH IN INCHES
9/16
WIDTH IN MM
14.3mm
THICKNESS IN INCHES
.050
THICKNESSS IN MM
1.3mm
LENGTH IN INCHES
7
LENGTH IN MM
175mm
StowAway Throttle Holder (4pk)
FEATURES:
-Bracket will hold: DT602, UT6 and other legacy Digitrax throttles
-Access to loconet and power ports when stowed away
-Stores throttle when not in use or when charging
-Fascia mounted
-Durable Design
-Easy to install
Pure Blue Mini Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO SD70 - DCC & Sound - Conrail #2573
Detailed Information
CR FEATURES:
Nathan K5LAR24 horn
CR-specific antennas and conduits on cab and long hood
Air Conditioner
Small front plow
-Dual- fuel sight glasses
Late fuel tank
Spare knuckle brackets on rear pilot
Spare knuckle basket on walkway
Cab vent
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO scale Barbed Wire Fence - Kit
Easy-to-assemble HO Scale Fences from Woodland Scenics feature modular design and include gates, detailed hinges and planter pins for easy installation. Each fence kit includes parts to build 192 scale feet of fencing. Fences for all kinds of scenes are available as part of the line of Woodland Scenics N Scale scenery details.
N Scale Wide-Vision Caboose - CSX: Safety First Scheme #21195
The Rapido Trains N scale Wide Vision Caboose features:
Super-detailed underbody including all separate air and brake piping
Free rolling Barber-Bettendorf caboose trucks
Detailed interior
Full end detail, including uncoupling levers
Separate metal grab irons installed at the factory
Interior Battery powered lighting and operating end marker lights
Optional roof mounted air conditioner
Knuckle Couplers mounted at the correct height
Optional fuel oil tank details (Road name dependent)
HO RTR 68Ft Bulkhead Flatcar - Illinois Central #978742
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
Beginners Guide to HO Model Railroading - for the Novice Model Railroader Book # 9
Level 1 - Beginner
Contains layouts HO-1 through HO-12. Entry level instruction book offers 12 layout plans, large clear diagrams, benchwork information, and track laying instructions and tips.
Plans can be built with Atlas Code 83 or Code 100 track.
Now includes Atlas Master DCC wiring instructions
Newly revised book contains twelve layouts built with either Atlas code 100 or code 83 track. Now includes code 83 track products required listings (in addition to code 100 listings); large, clear layout diagrams; and complete contruction and wiring instructions. Written in modern, simple language,. Perfect for the novice.
HO - 4750 Cubic Foot Rib-Sided - 3-Bay Covered Hopper - Illinois Central - #765977
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-Etched Metal Roofwalk
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO 100-Ton 3-Bay Open Hopper - Wheeling & Lake Erie #526
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
Scenic Accents(R) - Backyard Basics (8/pkg)
BH1 Tsunami 2 Sound Decoder - ALCO Diesel
Dimensions: 97 x 16 x 7.7mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 8 LED-Friendly Outputs!
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
Get an easy upgrade for your Bachmann Sound Value diesel models with our newest Tsunami2 decoder! The TSU-BH1 offers 8 LED-friendly function outputs so resistors are not required for LEDs! (See the wiring diagrams under product documentation for more information). Light effects are fully remappable and offer full access to our 20+ HyperLight effects.
This decoder is available in 3 sound profiles EMD, GE, and ALCO. For an easy install, simply replace the Sound Value decoder and enjoy all of the Tsunami2 features you love!
This decoder is designed to replace the factory board in the following Bachmann Sound Value Diesel Models: FA-2, FB-2, S-4, E7-A, SD70ACe, ES44AC, GP30, GP38-2, GP40, GP7, and SD40-2.
Fun Tsunami2 features including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and more. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+), couplers, and more!
This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.
HO EMD MP15AC Diesel - DCC Ready - GMTX GATX #319
GMTX FEATURES:
Ground lights
Road number specific features
Front and rear ditch lights
Cab-mounted A/C
GATX operates a fairly large lease fleet of locomotives to help service any railroads needs. We are offering full repaints from a range of different schemes used. Being leased as needed, these locomotives could be seen used all over the country, including Mexico and Canada.
ROAD NUMBER SPECIFIC FEATURES:
#319 Ex-SOO/MILW, All black repaint, cab-mounted 3-chime horn, frame-mounted bell, dual Xenon strobes (effect in DCC), small fuel tank, ratchet brake
#333 Ex-SOO/MILW, Light blue/black repaint, cab-mounted 3-chime horn, frame-mounted bell, dual Xenon strobes (effect in DCC), small fuel tank, ratchet brake
#335 Ex SP, Dark blue/black repaint, cab-mounted 3-chime horn, SP style number boards, blanked SP light package, frame-mounted bell, large fuel tank, brake wheel
MP15AC LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Lift rings
Windshield wipers
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Operating ditch lights (if equipped)
Operating ground lights
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and -printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
HO GP40-2 - DCC & Sound - CSXT #6429
Detailed Information
CSX FEATURES:
Newly tooled rear slug connection boxes
Large front anticlimber
Mid production with corrugated grilles
Body-mounted side bell
Chessie/CSX style front rock plow
K5 horn
Lit class lights and number boards (effect in DCC)
During the late 1980s, CSX Transportation modified many of their GP40-2s into -slug mothers- that powered RDMT (CSX term, short for Road-Mate) road slugs. The -slug- is a term used for (in most cases) a secondary locomotive that has a removed/deactivated engine but kept its traction motors. The -mother- unit at slow speeds can produce enough power to provide electric current to other traction motors using the same amount of fuel consumption. The -mother- and -slug- combination can provide the power of two locomotives using a single diesel powered unit. CSX liked the results, and modified many older GP30 and GP35s into road slugs, retaining their cab controls so that they could still be operated in lead position, but without the noise from the prime mover.
ROAD NUMBER SPECIFIC FEATURES:
#6427
-Stripe- repaint
regular radiator fans
-mail slot- battery box doors
#6429
-Stealth- repaint
regular radiator fans
regular battery box doors
#6441
-Stealth- repaint
Q radiator fans
-mail slot- battery box doors
large exhaust silencer
nose toilet hatch
GP40-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Steam Engine Bell w/Bracket (Brass Casting) - Air Ringer w/Top Anti-Rotation Bar
Flexible Textured Freight Car Load Sheets - Small Coal Lumps (3-3/4 x 12 Inches)
Add realistic loads to open freight cars or trucks (sold separately) with these unique loads from Chooch Enterprises. Molded in flexible vinyl that is easily cut to fit with scissors or hobby knife, each features realistic texture and surface detail, and can be finished with most acrylic paints (sold separately) for added realism.
Red, Black, Gray Load, Black Trucks
The Schnabel cars unique design allows it to carry extremely heavy or oversized loads, such as generators and transformers for power stations, by making the load an element of the car. The two tapered lifting arms that hold the load resemble a birds beak, which gave the car its name Schnabel is from the German for carrying-beak-wagon -Tragschnabelwagen. Schnabel is a funny name for a seriously powerful freight car.
Features include:
16 sets of 125-ton roller-bearing trucks
prototypically correct 36 inch metal wheels
RP25 wheel contours
8 span bolsters
detailed transformer load
molded hydraulic lines and pumps
27.5 inches long
E-Z Mate Mark II couplers
This model performs best on 22 inch radius curves or greater.
7/32 inch OD Square Brass Tube 0.014inch Thick x 12inch Long
Square Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 7/32 inch
HO 73Ft Center Partition Car - BNSF (H1) #562712
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
HO GE ES44AC - Standard DC - Canadian National (Web site) #2802
Evolution Series GEVO
Product Information
Bring the power of todays railroading to your HO layout with the WalthersMainline General Electric Evolution series diesels.
Introduced in 2005 to comply with tougher emission standards, and more known among railfans and modelers as GEVOs, these big engines have quickly become one of the most popular locos worldwide. Designated as the ES44 (Evolution Series, 4,400 horsepower), prototype variations in North American service include locos with DC or AC traction motors and buyers have also specified center idler axles, as well as high adhesion or steerable trucks.
Features of the models include:
Limited edition - one time run of these roadnumbers!
Model todays railroading at WalthersMainline prices
The most popular prototype diesel in North America
Thousands in service from 2005 to the present
Correct profile radiator grilles & roof-top walkway surface details
Easily handles 18inch radius curves (22inch or larger recommended)
Six powered axles per unit
LED Lighting includes:
High or low headlight per prototype
Working front ditch lights
Three truck styles to match prototypes:
Standard high-adhesion
Steerable
C4 A1A center idler axle
Fully assembled
Same powerful drive as WalthersProto(R) locos featuring:
Five-pole skew-wound motor
14:1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Dual machined brass flywheels
Heavy die-cast metal chassis
Constant and directional lights
Add grab irons to your model with the GE ES44 Evolution Series Diesel Detail Kit (910-250, sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Gunderson Multi-Max Auto Rack - CP SOO
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
HO Dash 9-44CW - DCC/Sound - UP #9696
UP FEATURES:
- Patched and renumbered former CNW units
- Patch, logo placement, and burn marks per prototype road #
- Nathan K3LA horn
- Primered replacement engine compartment doors
ROAD NUMBER SPECIFIC FEATURES:
#9675
- Primered replacement air conditioner
- replacement equipment door from a UP-painted loco, medium-height snowplow
#9696
- UP logos on sides of nose
- burn marks on engine compartment
- ghost outline of original CNW road number (8632)
- large snowplow
#9741
- UP logos on side equipment doors
- medium snowplow
- lasted in CNW paint until at least 2018
DASH 9-44CW SERIES LOCOMOTIVE FEATURES:
- Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
- Etched, see-through walkway steps
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
HO 16,000-Gallon Clay Slurry Tank - JMXH (3pk) #1
MODEL FEATURES:
- Separately applied fittings nozzle, manway, and small safety valve nozzle
- See-through Photo-etched metal walkways and end platforms
- Full brake plumbing and rigging including brake wheel, air reservoir cylinder, triple valve, brake linkage, trainline, brake rod, large brake
- Printed marking on the sides, ends, and top of the tank body
- Fine scale side ladders
- Placard holders
- Printed marking on the sides, ends, and top of the tank body
- Equipped with McHenry AAR upper/lower shelf couplers
- 36 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Multi-packs feature unique road numbers
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Kaolin, a fine white clay, is produced by the natural chemical weathering of aluminum silicate minerals such as feldspar. Mined in the southeast United States (primarily Georgia and Florida), kaolin is used in the manufacture of ceramics, bricks, light bulbs, cosmetics, medicines and food additives. The largest use is in the manufacturing of paper, especially in creating glossy paper. Kaolin is shipped both as a dry powder in covered hoppers and in tank cars with water as a slurry. In the slurry form the weight of water requires the tank cars be smaller capacity compared to other liquids such as ethanol and LPG. Identical tank cars are also used to haul calcium carbonate slurry, used in the making of lime and cement.
One of the more modern versions of the 16K Gallon Tank car is designed and manufactured by UTLX Manufacturing Inc (formerly Union Tank Car). The car is a 286K (referring to a 286,000 pound gross rail load limit) design with a capacity of approximately 16,000 gallons. The capacity varies slightly between UTLX and Englehard, the operators of the cars. The car is an AAR Plate C clearance car with a 111-inch I.D. tank and an overall length of 44 feet. For a complete bottom unloading the car incorporates a Funnel-Flow design. The cars are lined and kept in dedicated service to avoid cross-contamination.
Building the Right-Sized Layout - Softcover Book
Softcover Book by Thomas Klimoski
112 Pages
Have an extra spare room in your house? Downsizing your layout? Building The Right-Sized Layout is the perfect book to help with planning a room-sized layout for your home. This new book features 5 track plans covering details on how to create a manageable layout with space, time, and resources in mind.
Youll find:
Track planning strategies
Construction techniques
Room-planning concepts
Tips on operating once your layout is built
And more!
Featuring author Thomas Klimoskis Georgia Northeastern Railroad, as well as 3 other examples of small layouts, this planning book is a must-have for model railroaders.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - IWXX (Hunter Green) (6 pkg) #2
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
220026
220031
220032
220040
220056
220057
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
RTR 52Ft Mill Gondola, TFM #60099
MODEL FEATURES:
Fully assembled and ready for your layout
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
33In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
Open top cars, such as gondolas, have been a mainstay on railroads for decades as they are ideal for carrying large, bulky loads such as coil steel or scrap metal loaded by crane.
HO PC&F 5241 CUFT - Boxcar - Berlin Mills - Single Car #412
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Medium Oil Premium Hob-E-Lube (14.7 mL)
Significantly reduces the damaging effects of friction on metal to metal, metal to plastic and plastic to plastic. Good protector for metal surfaces. Helps to discourage rust, corrosion and oxidation. Good surface adhesion.
Viscosity: St at 40 degrees Celsius ...68
For use on:
- R/C linkages
- HO and larger scale model railroad side rods, gears, journals and motor bearing surfaces
- Workshop and garden tools, small appliances and casters
- Slot-car pinions and spur gears
- Precision instruments, fishing reels and office machines
HO GP9 - DCC & Sound - Penn Central #7506
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
33 Ft Tall 24 Ft Diameter
Typical of steel bins found on farms and at elevators to store all types of grains. Each section consists of six bands, which are stacked to various heights. Kits include parts to build the height shown. Also includes door, vents, dryer, chutes and grain head. All parts are molded in realistic galvanized color.
HO 52Ft Mill Gondola - GONX Railgon #310900
NEW FEATURES:
Refined end-sheet molded-on details
Improved rivet and bolt details
Corrected wire grab-iron placements
New top-chord details
New jack reinforcement pad details
New coupler cut lever mounting details
MODEL FEATURES:
Separately applied wire grab irons
Body-mounted McHenry operating scale knuckle couplers
33inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO EMD F40PH - DCC & Sound - VIA Rail Canada #6406
Product Information
Power your favorite Amtrak(R) or regional commuter trains in style with a WalthersMainline F40PH on the job! Built especially for passenger duties, the prototypes entered service in 1976 and many are still going strong today. Based on Phase 2b prototypes, the models feature:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed vertical hand rails
Molded drill starter points for grab irons (sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Fully assembled
21mtc connector
ESU Sound for DCC and DC layouts featuring:
- 4 function outputs with brightness control by CV
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch prime mover sounds
- Compressor
- Dynamic brake
Same powerful drive as WalthersProto(R) locos featuring
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Heavy die-cast metal chassis
- Constant and directional LED lights
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
Alternate horns and bell sounds can be programmed on the sound decoder using these CVs:
Horns: CV163 = 0 - Nathan K5LH (default)
CV163 = 1 - Nathan K5HLL
CV163 = 2 - Nathan K5H
CV163 = 3 - Nathan K5LLA
Bells: CV164 = 0 - Graham White E-Bell (default)
CV164 = 1 - GE Steel Bell
HO 89ft Thrall Enclosed Tri-Level Auto Carrier - BNSF #303084
Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these Walthers Proto models! Introduced in the mid-1970s especially to carry automobiles, the prototypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89ft flatcars with sidesill cut-outs and 28in wheels for added clearance. In service all across North America, the racks carry the owners logos, and most ride on flatcars leased from TTX with ETTX reporting marks.
A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
-Limited edition - one time run of these numbers!
-Prototypes in service from the 1970s to the present
-Factory-installed grab irons
-Separately molded and applied side ladders
-Ultra-smooth rolling metal axles with correct 28in wheels
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24in radius is recommended for operation.
HO RTR ACF 4650 3-Bay Hopper - Western Pacific #11753
(Feather Logo)
Date: BLT 5-82
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO Chicken Coop & Sheds - Kit
Build a bigger HO farm scene quickly and easily with the chicken coop and sheds kit from Cornerstone! Typical of farm buildings seen everywhere from the 1900s to the present, this super value set includes parts to build a chicken coop/hen house, a machine shed, a lean-to (partial structure with three walls), and a gravity fuel tank.
Other features include:
- Detailed plastic parts molded in oxide red and tan
- Positionable doors on machine shed
DIMENSIONS:
Chicken Coop: 2-1/8 x 1-1/4 x 1-3/8 inches
Machine Shed: 2-7/8 x 3-7/8 x 2-7/8 inches
Lean-to (partial structure): 3-1/2 x 1-7/8 x 1-1/2 inches
Gravity Fuel Tank: .68 x 0.6 x 1-1/2 inches
HO Scale - HO 30,000 Gallon Ethanol Tank Car - UTLX - #1 - 3pack
Detailed Information
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
HO SP 3/4 Dome-Lounge w/Flat Sides - Amtrak (Phase 1) #9371
-Overland Style
Rapidos SP Dome Lounge Cars Features:
Designed from original blueprints and field measurements of existing cars
Two fully-detailed interior configurations
Multi-colour interior decoration
Two underbody arrangements
Accurate interior and exterior paint and decoration
Full flicker-free track-powered interior lighting
Lighting (prototypically) in the dome roof
Accurate free-rolling trucks
Metal magnetic knuckle couplers
NCE Plug-N-Play Decoder w/White LEDs - N12A0e N Scale
For Atlas GP40-2, U25B, B23-7, 30-7, 36-7, GP38, SD25, Train Master
This is an EPF (extended packet format) decoder supporting:
Silent Running TM motor drive
Torque Compensation for ultra smooth low speed performance
Programmable Start, Mid and Maximum speed works for all speed modes
Motor rating 1 Amp continuous, 1.25 Amp peak (stall)
both function outputs have lighting effects generators
Select from 15 different lighting effects (Mars, strobes, beacon, flicker, etc)
Lighting outputs can be mapped to different functions
Uploadable speed table interpolated to 128 speed steps
Decoder assisted consisting
Support for all forms of DCC programming
Decoder programming lock mechanism
Brake on DC feature assists automatic train control
HO Storefront Signs - Main St. (Set #1)
Blair Line HO Scale Business and Storefront signs are printed in appropriate colors on thin plastic for easy assembly or placement with plastic cement or CA glue. Colorful signs are based on real signs and many include two identical signs for back-to-back, two-sided mounting. Steam and diesel-era signs make great roadside, street-side, trackside and structure details.
Bob Smith Industries Insta-Set 2fl.oz. spray
Accelerator
Foam safe
compatible with plastic and foam
for all CS glues
N Scale Modern Tagger Graffiti Decals - Set #14 (10pcs)
Love it or hate it, graffiti is everywhere. We do not condone painting graffiti on real railroad cars, buildings, bridges, etc. and it is against the law. But defacing your model railroad with Blair Lines Graffiti Decals is fun and still legal as far as we know! All decals are reproductions of graffiti found on real railroad cars.
All of these graffiti decal sets are now lasercut! What this means is you will no longer have to trim these decals close. You only have to cut a couple of small tabs and soak the sheet in water. As an added bonus, the decals are now printed on white decal paper making them more opaque!
HO SD70 - DCC & Sound - NS/ex CR Patch #2580
Detailed Information
NS EX CR FEATURES:
Same details as Conrail units below
Aquired by NS after 1998-1999 split of Conrail. Lasted several years before recieving full NS paint
CR FEATURES:
Nathan K5LAR24 horn
CR-specific antennas and conduits on cab and long hood
Air Conditioner
Small front plow
Dual fuel sight glasses
Late fuel tank
Spare knuckle brackets on rear pilot
Spare knuckle basket on walkway
Cab vent
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
4-in-1 Razor Saw Set
The Zona 4-in-1 Saw Set comes with four interchangable blades, 795-36555, 36050, 36458 and 36408 for pull or push stroke. The saw has a steel back for added stability and a hardwood handle.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AABX #206022
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OFOX (6 pkg) #1
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
1720
1774
1799
1838
1860
1866
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Mo Skeeters Bait & Tackle - Assembled
Stop at Mo Skeeters for all your fishing necessities. This rustic shop has a weathered metal roof, narrow clapboard siding and a covered front porch. The fully assembled model comes complete with signage, live bait tank, fish cleaning table, fish nets, a barrel of cane poles, a fisherman figure and more.
HO PS-2-4427 High Side Covered Hopper - Milwaukee Delivery 3-1967 #97885
Product: Pullman-Standard PS-2CD 4427 ?High Side? Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36″ Wheels
? Milwaukee Road MILW ?Delivery 3-1967? wears the classic yellow and black graphics as applied to this 300-car order from Pullman-Standard in 1967. Tangent?s previous run from 2018 featured Milwaukee?s 1968 order of cars with gravity-pneumatic outlet gates. We have carefully replicated the lettering on every panel, bay and center sill from bold MILWAUKEE ROAD to the tiniest PS lot 9174 stencil number. All of the lettering is present and accurate. These cars feature Miner gravity gates and a PS ribbed-style roof hatch. The model also features 100-ton Barber S-2 trucks with rotating Timken caps. Each SKU number varies with CAPY, liner stencil and related Pullan date information. We hear you Milwaukee Road modelers, and your continued requests for more MILW Tangent covered hoppers in our correct shade of Federal Yellow!
HO Hawker-Siddeley Van - Caboose - Canadian National - Late - (Black Steps) - #79223
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
N Scale M1 Basic Oval Track Starter Set w/Kato Power Pack
Includes:
- Complete oval of track (12-3/8 inch radius)
- Grade crossing/rerailing track
- Storage Drawer for locomotives/accessories
- Kato Power Pack SX
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504875
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
Southern Pacific (SP) B-70-43 Delivery 1969 shows off the classic, as-delivered SP paint and lettering. From the accurate SP red with that eye-catching yellow left hand door, to the subtle roof overspray, this beauty is ready to haul paper on your railroad. SP loved to advertise their boxcar features, and Tangent has taken the time to accurately replicate the Hydra-Cushion For Fragile Freight graphics on the side of the car. All of that beautiful SP data is also present ? every single element ? From the big bold Southern Pacific down to the most intricate and finely printed FMC Gunderson Bros. builder stencil. The SP 1969 Delivery scheme also features accurate details like Morton crossover platforms, an Ajax brake housing and a Modern brake wheel. The prototype SP cars were fitted with Hyatt roller bearings, and the Tangent model replicates this with correct SP red trucks and Hyatt rotating roller bearing caps.
FEATURES:
Product: Gunderson 6089 50ft High Cube Boxcar
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Birdsboro foundry Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 33in Wheels
NOTE: Road number may vary from picture shown.
Water Kit
Kit includes materials needed to model 28 square inches (180 sq cm) of streams, rivers, lakes or other water features
RTR 57Ft trinity 3-unit Spine Car - TTRX #361001
Expected time of arrival : April 2021
MODEL FEATURES:
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Precision die-cast metal spine structure
Etched metal walkways
Separately applied brake piping
Highly detailed customer applied trailer hitches
53Ft trailer and container are perfect loads for the 57Ft spine car
Fine ladder detail
Weighted for optimal performance
33Inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers installed
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Machined metal wheels
Minimum radius: 20Inch
PROTOTYPE AND BACKGROUND INFO:
Intermodal transportation requires specialized rail equipment which is, on occasion, too specialized. To allow more flexibility in loading containers and trailers at terminals all-purpose spine cars were developed. These cars can be configured to allow loading of trailers of varying lengths, from 28Ft pups to 53Ft high capacity units. With the trailer hitches collapsed containers can also be loaded. 40Ft, 45Ft 48Ft and 53Ft containers call all be accommodated on these cars as well as 20Ft models provided they are mounted to a chassis.
The prototype for our model is based on a Trinity-built car owned by the TTX Company. These 70-ton cars (TTX class RAF30A) numbered TTRX 360817-361116 first appeared on the rails in the late 1990s. The Athearn model is faithful to the prototype allowing modelers to load a variety of trailers and containers.
Specifications
PROTOTYPE MANUFACTURER: Trinity
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990s+
Expand container traffic on your 1960s and 70s era HO layout with this series of authentic models from - SceneMaster, featuring:
- Standard end-door and right-side door versions as appropriate
- Authentic rivet, door latch and hinge details
- Colorful period schemes
- Perfect period loads for WalthersMainline G85 and 60ft Pullman-Standard VTTX container flatcars (each sold separately)
Tru Color Paint - Acrylic - Genesse & Wyoming Orange - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Greenville 86ft Double Plug Door Box Car - Penn Central #295140
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Release Date: August 2021
Penn Central (PC) -Original 1968- is our second foray into the world of Penn Central 86ft Boxcars. Previously, our PC offering was a repaint of a former PRR car. This time? We are living to the words of our last press release, where we promised delivery PC cars in the future. That future is now: the Greenville-painted original PC cars, classed as X-60M, are here. Built in October 1968, these cars have the large PC graphics on the side of the car. The -When Empty Return to- stenciling is to Chicago Heights IL, again representing the service to/from the Ford Chicago Stamping Plant. PC-distinctive details stand out on this replica, including a gorgeous Peacock 850 hand brake and Morton crossover platforms. 100-Ton Trucks with 36inch wheels and rotating Timken roller bearing caps finish off this PC offering. These stunning models are now available in eight road numbers – do not miss them! Can you ever have too many 86ft PC Greenville box cars? We don’t think so…
HO 1.25 Amp Mobile Decoder for Kato EMD SD70MAC & Other Locos
Features:
- Series 3 HO Plug N Play Decoders with Integrated Plug
- Compatible with Sound Bug (Note this is not a plug n play installation, wiring is required)
- Decoder Lock equipped
Current Rating-Motor: 1.5 Amp (2.0 Amps Peak)
Size: 0.67 x 1.05 x 0.25 inch (17.02mm x 26.67mm x 6.35mm)
Installation: Integrated DCC medium plug
Function Outputs: 6-500mA
Function Type: FX3
Features: Series 5
For Use With: Sound Bug Sound Only Decoder
Noch 15847 - HO Voyeurs (4 Women, 2 Males)
HO NSC Ballast Hopper - Canadian National (Maintenance Scheme) #302278
1976+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
Flowering Blossom - Shaker 16oz - Maize Yellow
HO Code 83 Track - 2 inch Straight Sections (4/pkg)
Atlas HO Scale Code 83 Snap Track features brown ties and nickel-silver rail. Its perfect for modelers of all skill levels looking for high quality, prototypical-looking track with a near-scale rail height. Brown ties feature molded centerline nail holes for easy mounting with #2540 track nails. Fully compatible with all Code 83 Snap Track and conventional Code 83 track systems. Adapter track joiners #551 are available so you can also use Code 100 track on the same layout if desired. The track geometry of Code 83 track matches that of Code 100 Snap Track, so Code 83 track can be substituted for Code 100 in various Snap Track track plans.
HO GMD SD40-2W - DCC & Sound - Canadian National (Website) #5335
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. DCC with Sound version features LokSound V5 decoder.
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
HO Jordan Spreader - Delaware & Hudson #35055
FEATURES:
- One-time run of these road numbers, order now, limited quantity available
- Factory-installed grab irons
- Positionable wings and moldboards can be raised and lowered
- Built tough with durable metal hinges and other details
- Complete underbody with brake gear and piping
- Thin profile stirrups
- Cab window glass
- Railroad-specific details:
- Horizontal or vertical air reservoir
- Original or one of 3 later headlight styles as appropriate
- 70-ton roller bearing or Bettendorf trucks as appropriate
- Single-chime air horn placement
- Ultra-smooth rolling metal axles and 33 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PSC Transfer Van - Canadian National #76570
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
HO 40Ft Wood Reefer - UTRX #11633
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch
HO F30A 50Ft Flat Car w/Sleeper Van - Norfolk Southern (NS MOW) #62304
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
Rapidos F30 Camp Cars Feature
All-new camp trailer loads in four styles
End railings and platforms
Photetched details
Multiple car numbers per scheme
HO Alco RS-3 - DCC & Sound - Maine Central - as delivered - #557
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. DCC/Sound version features LokSound V5 decoder.
HO GMD SD40-2f - DCC Ready - Canadian Pacific: Beaver Logo #9022
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
N Scale Short Barrel Ore Hopper - Ontario Northland: Progressive Green #6527
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
N Scale 53ft Corrugated Container - Crowley #6010887
HO B-50-15 Boxcar - As Built w/ Viking Roof - Southern Pacific (1946 to 1952 scheme) #15419
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
Budd Baggage-Dorm Original Scheme - VIA Rail #603
Each Baggage-Dorm includes:
Realistic stainless steel finish
Track-powered interior lighting compatible with DC and DCC layouts
Full underbody detail including separate air, steam and electrical lines
Separate metal grab irons, stirrups and end gates
Accurate D22 brake equipment and piping
Super-detailed 41-NDO-11 trucks with end frames
Full, multi-color interior detail
3D CP beaver shields on CPR models - not just a printed picture!
Sprung diaphragms
Metal Macdonald-Cartier knuckle couplers
HO Alco RS3-M Chop Nose - DCC & Sound - Delaware & Hudson: Bi Centennial #1776
Photo courtesy Mike Herman Family
Delivery Expected Early 2024
Details:
RS-3 units #4115, #4106, #4107, #4113, #4122, #4112, #4119, and #4128 were rebuilt by Morrison Knudsen into RS-3m units (numbered #501-508, respectively) between December of 1975 and March of 1976. The locomotives were re-engined with the 2,000 horsepower ALCo 12-cylinder 251C engine, and the long hood was raised six inches to accommodate the larger engine. The dynamic brakes were also moved to a box behind the cab.
HO NSC Ballast Hopper - BC Rail (Late) #2866
1990+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
Speaker Gasket Kit - 16 x 35 mm (4pk)
Package of four gaskets for mounting our 35 x 16mm oval speakers (P.N. 810113).
HO Curved Track - 22.5 Degrees - 16-7/8 Inch Radius (4pk)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes. Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation! Suitable for all types of layouts, whether temporary or permanent. This modular track system features an integrally molded roadbed for realistic appearance. Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
N Scale 50Ft Boxcar - GATX (BKTY) #151068
Built in 1977 by FMC for Hartford & Slocomb Railroad, these 50Ft boxcars with Barber Roller Bearing trucks were later operated by the New Orleans Public Belt. Eventually, Union Pacific received the cars and painted them in their boxcar red scheme, with ex-Missouri-Kansas-Texas -BKTY- reporting mark and GATX lettering.
HO SD60M Wide Cab Diesel - DCC & Sound - Union Pacific, Flag #2442
Expected in May 2022
Detailed Information
UP FEATURES:
Large EMD plow
Front ditch lights
Nose headlights
Included in this run of UP SD60Ms are both early and current versions. These locomotives were used in just about every service, hauling coal and fast intermodel, to drag freights and locals. As of a few years ago, a small batch were taken out of retirement, repainted and sent back out to work.
We are offering both as-delivered and current versions to satisfy UP modelers in different eras.
ROAD NUMBER SPECIFIC FEATURES:
#2442
Post 2018 repaints with flag and wings scheme
yellow sill
modern PTC antenna setup
Nathan M-3 horn.
#2457
Post 2018 repaints with flag and wings scheme
yellow sill
modern PTC antenna setup
Nathan M-3 horn.
#6317
As-delivered appearance in 1993. Red-sill
Leslie 3-Chime horn
fire cracker antenna.
#6364
As-delivered appearance in 1993. Red-sill
Leslie 3-Chime horn
fire cracker antenna.
LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully-assembled and ready-to-run
Replacement parts available
Minimum radius: 18inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Diesel Detail Kit - For EMD GP9 Phase II
Make your Walthers Mainline HO locos even more realistic in minutes with this Diesel Detail Kit! The complete set of grab irons fits the standard locations on the model, and they are made of durable, factory-formed stainless steel wire, with illustrated instructions included. Designed especially for the Walthers Mainline EMD GP9 Phase II (sometimes known as the Phase 2) 910-20402 series with ESU Sound for DCC or DC operation or 910-14000 series Standard DC locos, this 30-piece set has all standard grab irons and lift rings to do one unit including:
13 Drop-style grab irons
1 Straight grab iron
2 long pilot grab bars for early high hood units
14 photo-etched lift rings
HO H21A 4-Bay Hopper - Pennsylvania (PRR Black, Plain Keystone) (6pkg)
1961+
6-Pack includes the following numbers, all individually packaged: #695401, #695513, #695602, #695713, #695884, #695981
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Archer-Daniels-Midland ADM UELX #30227 (yellow, blue; Molecule Logo)
Expand grain traffic on your HO railroad with a fleet of these WalthersProto(R) hoppers! Based on the widely used 55 Ft Evans 4780 cars introduced in 1977 for grain service and still in use today, features of the models include: Limited edition - one time run of these road numbers!
Favorites for hauling grain & dried distillers grain (DDG)
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint & lettering
Ultra-smooth rolling metal axles and 36 inch wheelsets
Proto MAX(TM) metal knuckle couplers
Van Hobbies - HO Brass CPR GP9 Chopnose Painted #1592
Display picture is accurate to the item being sold.
Pre-owned, but in great condition!
Comes in the original Box!
This brass unit has been painted to match the #1200 CPR Scheme
Please note that this item is final sale.
No refunds or exchanges.
HO Peterbilt 579 Day Cab Tractor w/Pneumatic Bulk Trailer - Venezia
(green, white, chrome)
0.016 inch Thick Brass Flat Sheet - 6x12inch
Brass Flat Sheet 6inch Wide x 12inch Long (1 pc)
15 x 30cm
HO RTR 68Ft Bulkhead Flatcar - Western Pacific(TM) #1489
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
Burlington Northern Santa Fe, Faded H1 #7724
NEW FEATURES:
•All-new LED lighting
•Rubber MU hoses for durability
BNSF FEATURES:
•Heritage II painted units with faded paint to depict in-service appearance
•Short front snowplow
•Nose door window
•High number boards
•4-window cab side windows
•Desktop control stand
•Sunshades
•Salem air filter
•Electronic parking brake
•Hi-adhesion trucks
•High rear sand filler
•Low rear vertical headlight
#7795:
•dog’s breakfast hood doors unique decoration on each side with primer-painted doors and replacement doors from a Heritage II painted unit
LOCOMOTIVE FEATURES:
•Illuminated ditch lights
•Low or high front headlight per prototype
•Tinted cab windows
•Large antenna dome
•Small GPS dome
•See through dynamic brake intakes
•Two dynamic brake exhaust vents with wide spacing and flush housing
•Short auxiliary cab rear left-side doors
•Right side forward electrical cabinet with X-Panel
•Nathan K5HL horn
•Engine compartment side grab irons
•Flush radiator compartment doors
•Hand brake panel grille
•Flush heat exchanger housing and top radiator grilles
•5000-gallon fuel tank
•Era: 2005+
•Minimum radius: 18 in
•Recommended radius: 22 in
GENESIS DIESEL LOCOMOTIVE FEATURES:
•Fully-assembled and ready-to-run
•DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
•Scaled from prototype resources including drawings, field measurements, photographs, and more
•Accurately-painted and –printed paint schemes
•Coupler cut levers
•MU hoses
•Trainline hose
•See through cab windows
•Full cab interior
•Walkway tread
•Fine-scale Celcon handrails for scale appearance
•Windshield wipers
•Lift rings
•Wire grab irons
•Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
•Sander lines
•McHenry scale knuckle couplers - Kadee compatible
•Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
•All-wheel drive with precision gears for smooth and quiet operation
•All-wheel electrical pickup provides reliable current flow
•Wheels with RP25 contours operate on all popular brands of track
•LED Lighting for trouble free operation
•Heavy die-cast frame for greater traction and more pulling power
•Packaging securely holds for the model for safe storage
•Replacement parts available
SOUND EQUIPPED MODELS ALSO FEATURE:
•Onboard DCC decoder with SoundTraxx Tsunami2 sound
•Sound units operate in both DC and DCC
•Full DCC functions available when operated in DCC mode
•Engine, horn, and bell sounds work in DC
•All functions NMRA compatible in DCC mode
•Excellent Slow speed control
•Operating lighting functions with F5 and/or F6
•Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
•Many functions can be altered via Configuration Value (CV) changes
•CV chart included
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Early CWSX #140017
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO GMD SD40-2 - DCC & Sound - BC Rail (RWB Hockey Stick) #767
Product Information
This Bowser Executive Line GMD SD40-2 is based on the huge fleet of diesels constructed by the General Motors Diesel Division plant in London, Ontario for several Canadian railroads, and a few US lines as well. This finely detailed model features GMDD and railroad-specific details, accurate decoration, operating headlight, can motor, brass flywheels, nickel-silver wheels with RP25 flanges and knuckle couplers.
Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound Select decoder. Analog (DC) version has 21 pin socket for DCC module.
Bowser does not recommend LOK sound locos for use on DC layouts.
Features LokSound Select decoder, GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, Flywheels, Can motor, RP25 flange, KD couplers
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
Enamel Paint - Dark Yellow Wash - 35mL
A wash specially designed for German Dark Yellow, but also great for vehicles in medium tones. Just shake well before use and you can apply it directly to your model to create contrast and depth in the details. Remove excess with a clean brush moist in Enamel Thinner. This is an enamel product and can by dissolved using AKI White Spirit or Odorless Turpentine.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today.
Peco PSG-609 - 6mm Static Grass - Hay Field (20g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
F7 A/B EMD F-Unit Diesel - DCC & Sound - New York Central/ Freight #1843/3465
FIRST TIME IN GENESIS: CIGAR BAND SCHEME
ROAD NUMBER SPECIFIC FEATURES:
#1772
Small lettering
Freight pilot
Tall cab side windows
Late style vertical carbody louvers
Late style vertical -Farr- etched grills
#1699
Small lettering
-Passenger- pilot
Short cab side windows
Early style horizontal carbody louvers
Early style horizontal etched grills
#1704
Large lettering
-Passenger- pilot
Short cab side windows
Early style horizontal carbody louvers
Early style horizontal etched grills
#1843
Large lettering
Freight pilot
48Inch D/B fan
Tall cab side windows
Late style vertical carbody louvers
Late style vertical -Farr- etched grills
#3465
F7B unit
48Inch D/B fan
Late style vertical -Farr- etched grills
LOCOMOTIVE FEATURES:
All units are powered
Heavy die-cast frame for greater traction and more pulling power
DCC-ready features Quick Plug plug-and-play technology with both 21-pin connector (DCC-Ready only)
Factory installed SoundTraxx Tsunami2 sound and DCC decoder (DCC+sound units only)
Tsunami sounds are compatible with both DCC and DC operation (DCC+sound units only)
Genesis driveline with balanced five pole skew wound motor and dual flywheels
Directional constant lighting-featuring LEDs; headlight brightness remains constant
Scaled from prototype resources including drawings, field measurements, photographs, and more
Separately applied photo etched metal and injection molded detail parts:
Cab interior
1 Coupler cut levers
MU and Trainline hoses
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body mounted McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Detailed Blomberg-B trucks with prototype-specific wheel bearings
Replacement parts available
Minimum radius: 18In
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 decoder pre-installed
Sound units operate in both DC and DCC
Individual sound boards installed in both A and B units (sound units only)
All functions NMRA compatible in DCC mode
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Slow speed control
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Lighting effects such as beacons and Gyralight where prototypically accurate
A and B units often include sound decoders with different default pitch shift, so MU lashups sound unique
PROTOTYPE SPECIFIC INFORMATION
The F-units were the most successful -first generation- road (main line) diesel locomotives in North America, and were largely responsible for superseding steam locomotives in road freight service. Before this, diesel units were mostly only built as switcher locomotives, and only used in rail yards.
Pro Grass Micro Applicator
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. The Static Grass Applicators PSG-1, 2 and 3 electrostatically charge the grass filaments so that they stand vertically, regardless of the terrain. The PSG-1 applicator is designed for creating medium to large areas, such as lawns, fields, moorlands etc. Mixing various lengths and colours of grasses can produce highly realistic textures and effects.
Evergreen Scale Models Opaque White Polystyrene Strips 14in .10x.156 (7pcs pkg)
HO Code 70 Nickel Silver DCC-Friendly #4 Turnout - Left Hand
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 70 rail! Combining great looks and great performance in a complete system, each item comes fully assembled and features:
- Matches 100-pound rail used on secondary main lines, branches, yard leads and sidings
- Narrow width ties molded in realistic dark brown with enhanced wood grain detail
- Fine profile molded spike and tie plate details on each tie
- Spike-mounting holes positioned next to the rail
- Molded starter points on underside of ties for Track Nails (948-86103, sold separately)
- Custom formulated nickel silver rail for outstanding electrical conductivity
HO 20K Gallon Acid Tank Car - GATX/Black Band #50167
Era: 1971-1990, 1991-2009
MODEL FEATURES:
- Multiple road numbers
- Many separately-applied details
- Etched metal walkways
- Different top platforms as appropriate per prototype
- Different brake systems as appropriate per prototype
- Separate wire grabs and handrails
- Trucks with animated rotating bearing caps
- Minimum radius: 18 inches
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Body-mounted, McHenry scale double-shelf knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod
details
- Machined metal wheels with RP25 contours operate on all popular brands of track
N Scale Short Barrel Ore Hopper - CN Mineral Brown #346036
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO Window & Door Assortment (200pcs)
Includes 22 doors, 36 architectural details and 143 windows.
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- TTX
Trailer Train 60ft Pullman-Standard bulkhead flatcar #92340
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
N Scale 1930s Highway Overpass - 50ft Deck w/Pier
The Rix Highway Overpass for N scale is modeled after the bridges built during the 1930s and 1940s to span over railroad tracks. This style of bridge was used all over the country and is common to most people. The Rix Highway Overpass consist of 50 foot spans which interlock together so that any length bridge can be built. The pier is designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy.
Dimensions: 3-3/4 x 1-7/8 inches
Kit includes (1) 50 foot overpass. Beams, Roadway, Early Railing, and 1 pier.
HO 40Ft Smooth Side Containers - K-Line KKLU #2 (3pkg)
MODEL FEATURES:
Fully assembled
Easily stackable
Each container is individually numbered
HO NSC Ballast Hopper - BC Rail (Late) #2872
1990+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
PRR X31A Single-Door Boxcar: Shadow Keystone, Late - Single Car #67417
(1957-19560)
Detail Variations:
6-pack includes the following numbers:
#67408
#67417
#70173
#70384
#70410
#76700
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4579
5inch stripe, Large Multi-mark w/out water expansion tank, no ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
HO Alco FA-1 & FB-1 Set - DCC Ready - Canadian Pacific (Block Scheme) #4026, 4415
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Santa Fe Rack & Flatcar #88036
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers