Intermountain HO - Norfolk Southern (Ex0 Southern)
60 ft Wood Deck Flat Car
Features sharp paint and lettering, wire details, laser-cut wood decks, metal wheelsets and Kadee(R) couplers.
HO GMD SD40-2 - DCC & Sound - Canadian Pacific (Block Lettering) #5901
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars,
operating headlight, window glass, road name specific details, roadname specific fuel tanks,
can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC,
DCC with Sound version features LokSound Select decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
The Rapido HO Scale F7B and F9B feature:
Designed from original GMD blueprints and field measurements
The only 100% accurate GMD-built F7B and F9B locomotives – This is not a stand-in
Road-number and era-specific details applied at the factory
Steam generator or no steam generator panel as appropriate
Correct bodyside grilles as appropriate
Correct end details including unique CN steam generator end louvers
Backup light in correct location for CN or CP
Unmatched underbody details including air piping
Operational backup light (DCC)
Drive system designed for silky-smooth slow-speed operation
Metal Macdonald-Cartier Knuckle Couplers
DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings
Several road numbers per paint scheme
HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) (6pkg)
6-Pack includes the following numbers, all individually packaged: #485424, #485444, #484476, #484587, #484643, #484985
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
N Scale Scenic Accents(R) Figures -- Checker Players
Built-&-Ready Landmark Structures - Dansbury Depot
Assembled - 7-1/2 x 5-9/16in (19 x 14.1cm)
The most important building in any small town is the local depot. A gateway to the outside world, it was also the first thing a visitor saw when they stepped off the train! As a result, railroads went to great lengths to build attractive stations, painting them in company colors and adding a variety of trim to make the basic structure more handsome.
Small towns along your line will be delighted to have this building alongside the tracks. Its complete with a high platform, nonworking train order signal and platform lamps, luggage, baggage wagon, benches and much more.
HO Code 100 Nylon Insulating Rail Joiners (12)
2-Pin Micro Connector - .098 x .06 x .12inch with 6inch Wire Leads (Red & Black Wires)
This is a simple, two pin, 1 mm (0.039inch) pitch, micro quick plug wired connector. These amazing new micro connectors are nearly half the size of our popular, super-small Mini Connectors that we have offered for years. When connected together it is .098inch wide by .06inch tall by .12inch long, and it has 6inch long wires on both ends. This mini, quick plug connecter is ideal for hardwire situations where you may have to remove or disconnect certain components from time to time. This quick plug connector is also ideal for -Break Away- applications where connections to need to be broken easily for safety or convenience.
Each side of the connector has either a white and a black, red and black, or purple robotic wire (for polarity matching). The wire is 32 gauge, very flexible, and insulated with heat shrink tubing.
The Pitch (distance from center to center of the pins) is 0.039inch or 1 mm.
HO Thomas Saves Santa Sleigh - Train Set
Join Thomas on a magical adventure as he saves the day by bringing Santa Claus his trusty sleigh just in time for Christmas deliveries! Features Thomas with moving eyes, two festive freight cars including a Plank Wagon with Christmas Sleigh Load, Naughty or Nice Brake Van with Santa figure, and a full oval of snap-fit E-Z Track.
This ready-to-run train set includes:
- Thomas the Tank Engine with plow, holiday hat, and moving eyes
- Plank Wagon with Christmas Sleigh and international-style hook and loop couplers
- Naughty or Nice Brake Van with Santa Figure and international-style hook and loop couplers
- 47 x 38 inch oval of snap-fit E-Z Track with 12 pieces of curved track, 1 piece of straight track, and 1 plug-in terminal rerailer
- power pack and speed controller
- illustrated instruction manual
HO 53Ft 6Inch AAR 70 Ton Flatcar - Pere Marquette #16557
Date: BLT 1-43
-All are Ready-to-Run
-Laser Cut Wood Deck
-Laser Sharp Painting and Printing
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO NSC 64 Ft 6000 Cubic Gondola HS - XRMX #2207
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14059
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Oval Speaker - 40 X 20mm
This is a great speaker for many HO and S-scale locomotives.
Dimensions: 40 x 20 x 8mm(D)
Frequency Response: 550Hz - 12kHz
Power: 1 Watt (Nominal) 1.5 Watts (Peak)
Impedance: 8 Ohms
ONR Short Barrel Ore Car - Unpainted and Resin Cast Kit
HO EMD SW9 - DC/ Silent - Illinois Central (IC Black Scheme) #468
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Illinois Central:
Delivered in 1951
Road style end rails with drop steps
Short side handrails
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
All Scale - Shelf Rocks - Ready Rocks - 6 Pieces
Precast plaster and hand-painted. Each rock is unique. Shelf Ready Rocks are cast to nest side-by-side and top-to-bottom. Use separately or to create a large wall. 6 rocks. 7 to 7-1/2inch
HO AutoScenes - Pauls Fresh Produce
Paul and his helper deliver a pickup truck bed full of the freshest product your layout gardens have to offer. The vintage step-side includes such details as grooved running boards, tailgate in unload/load position, and the bed is full of fresh fruits and vegetables!
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
HO SD70ACU - DCC & Sound - Canadian Pacific (Military Scheme) #7020
ETA: October 2023
Detailed Information:
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military commemorative paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system. CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in temperate climates. CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and ?printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20186
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Flexi-Van 40ft Trailer - Milwaukee Road #2 (2pk)
(large name w/side doors)
Capture the color and variety of early intermodal operations with SceneMaster flexi-van trailer 2-Packs! Introduced in 1958 with removable wheels for use on specially-equipped flexi-van flatcars, they were later converted to standard 40ft trailers for road and rail service and served into the 1980s.
FEATURES:
- End or side doors as appropriate
- Detailed wheels and bogie with landing gear
Canadian Trackside Guide - 2024
All the information you want in an easy-to-read layout and including the former Kansas City Southern. Larger text (where space permits), with parts 16 and 17 in full colour!
The 2024 edition of the Canadian Trackside Guide? is the Bytown Railway Society?s 42nd edition ? contains 800 updated and expanded 5?? x 8?? pages current to mid-February 2024
Edited by Earl Roberts & David Stremes
Cover Photo: David Maiers
The only comprehensive guide to Canadian Railways
Locomotives of CN, CPKC, VIA, plus Regionals and Industrials
Preserved equipment
Passenger cars
Urban rail transit
Cabooses
Non-revenue equipment
Radio frequencies
Passenger train schedules
Freight train numbers
Railway reporting marks
Detailed divisional maps and subdivision listings for all Canadian railways and their U.S. components (including the former KCS), including station names, mileposts, detectors, siding lengths, and more
Maps of major cities detailing rail lines (in colour)
Signal indications (in colour)
1/24 Scale - SCX24 RTR 2021 Ford Bronco 4WD Truck Brushed - Blue
Axial reaches a new peak in 1/24 scale realism with this officially licensed Ford Bronco 4WD that tops the proven SCX24 platform with a highly detailed ABS hard body. Ideal for indoor or outdoor trails, its a must for Ford fans and RC enthusiasts of all ages!
- Factory-assembled and ready-to-run, with 3-channel radio, 030 brushed motor, servo, ESC/receiver unit and AA transmitter batteries included
- Officially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tire
- Bonus second decal sheet for optional customization
- Nitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheels
- Working lights in front, with molded lenses on all four corners of the body
In The Box:
(1) Axial SCX24 Ford Bronco 1/24 Scale 4WD RTR
(1) Horizon Hobby 2.4GHz 3-Channel Radio System
(1) Axial AS-1 Micro Servo
(1) Horizon Hobby ESC/Receiver Combo
(1) Dynamite USB LiPo Charger
(1) Dynamite 88T 030-Size Brushed Electric Motor With Pinion
(1) Dynamite 350mAh 2S 30C 7.4V LiPo Battery
(4) AA Batteries for Transmitter
(2) Decal Sheets
(1) Product Manual
Needed to Complete:
Nothing ? everything is included in the box!
Coarse Turf - Fall Red - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
HO GP9 DCC Ready - Toronto, Hamilton, & Buffalo #401
ERA: Early 1960-1970s
THB FEATURES:
-Steam Generator Intake & Exhaust
-Long hood nose mounted bell
-Separate ACI plates included
-Roof mounted air tanks
TH&Bs 3 steam generator equipped GP9s began service in 1954 and effectively vanquished steam on this small Canadian railroad. Their time in passenger service was relatively short and they served out their time in freight service all the way into the CP Rail era.
LOCOMOTIVE FEATURES:
-Trainline and MU hoses
-Coupler cut levers
-Drop steps unless noted
-MU stands
-Nub style walkway tread
-Bell placement & type per prototype
-Fine-scale handrails for scale appearance
-Wire grab irons
-Lift rings
-Windshield wipers
-See-through cab windows and full cab interior
-Etched metal radiator intake grilles and fan grilles
-Air tanks mounted below sill unless noted
-Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
-Blomberg-B trucks with appropriate bearing caps
-Sander lines
-Speed recorder unless noted
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately-painted and printed paint schemes
-Body-mounted McHenry operating scale knuckle couplers
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
-All-wheel drive with precision gears for smooth and quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-Bidirectional constant LED lighting so headlight brightness remains constant
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds the model for safe storage
-Replacement parts available
-Minimum radius: 18in
SOUND EQUPPED MODELS ALSO FEATURE
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OAKX #56
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO SD60 - DCC/Sound - Union Pacific #2212
MODEL FEATURES:
Locomotives come with railroad-specific details including: Operating beacon (in DCC/Sound version), horn, winterized hatch, antenna, handrails, etc.
SPECIFICATIONS:
DCC: Equipped with Econami2
PROTOTYPE MANUFACTURER: EMD
Axles: 6
LIGHTED: LED Lighting
PROTOTYPE AND BACKGROUND INFO:
In 1984, Electro-Motive (EMD) introduced the 60 series locomotive. These had many improvements over the earlier models including features such as: New and improved EMD 710 power plant producing 3600 HP, wheel slip control, computerized cabinet replacing the older and unreliable components.
This design spawned into many other upgrades within its class like the modernized wide cab, Isolated cab, and even the start of AC traction technology.
These locomotives were suited for just about any mainline service that could be thrown at them. The model was fairly popular with class one railroads, with Norfolk Southern purchasing the most at 151 units. Most of them are still in service today. Norfolk Southern in 2010 started a large full rebuild program of their SD60s (including purchasing cores from other sources) into SD60Es, which rebuilt them from the frame up with new electrical components and a newly designed cab to improve visibility and forward crash impact safety.
HO Chicken Coop - Unpainted Metal Kit
DIMENSIONS:
2-1/2 x 1 inches
You will practically hear the chickens clucking! This scene would be great on a country scene. Includes chickens, the shed, a bench, feeders, and the old chopping anvil.
HO Procor 3000CuFt Aluminum Hopper w/Handrails - UNPX/ Procor Wordmark #127248
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO 45ft CIMC Container - DHL
(yellow, red)
FEATURES:
- Based on common size & style used worldwide
- Fully-assembled & ready to use
- Colorful paint & lettering schemes
- Separate door latch details
- Realistic loads for WalthersMainline(R) & WalthersProto(R) well cars, sold separately
- Great detail for terminals, highways & industrial scenes
HO Code 83 Nickel Silver Rail - Wooden Ties - Flex Track (25pk)
Peco Code 83 track items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings.
Technical Specification:
Length: 3ft each
USE:
SL110 Conducting Rail Joiners: Nickel Silver for PECO Code 83 track
SL111 Insulated Rail Joiners for PECO Code 83 track
SL14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork
HO EMD F7A - DCC Ready - Wabash #631
Detailed Information
WAB FEATURES:
F7 Phase I
No dynamic brakes
Dual single-note air horns (A-units)
Passenger pilot
Cooling coils on roof
Wabash units 1158-1189 were delivered in 1951-52. In the 1960s, they were renumbered into the 600-726 series. Wabash 1189 has been preserved and is currently operational at a railroad museum in Illinois.
ROAD NUMBER SPECIFIC FEATURES:
#625
Nose MU connection
cut skirts
#631
Nose MU connection
cut skirts
#1169-A
Full Skirt
#1189
Full Skirt
F-UNIT SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Windshield wipers
Lift rings
Wire grab irons
Sanding lines
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Directional constant lighting
Headlight brightness remains constant
Separately-applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes & retention tanks
Speed recorder unless noted
See-through cab windows and full cab interior
Etched metal fan grilles
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO GE Dash 9-40CW - DC/DCC Ready - Norfolk Southern NS #9806
NS FEATURES:
Front and rear ditch lights (Alternately flash in DCC mode)
High-mounted head light and number boards
K5 horn
Electronic brakes
Graham White Electronic bell
Delivered new in 2003 from GE, NS took delivery of class 9745-9811 Dash 9-40CW locomotives. Some unique features include: electronic bell, high mounted headlight, and electronic parking brake. We are offering both versions of the front cab schemes to choose from!
ROAD NUMBER SPECIFIC FEATURES:
#9754 -White face- scheme
#9773 -Unibrow- scheme
#9806 -Unibrow- scheme
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO Drive-in Oil Change - Repurposed Gas Station - Kit
Product Information
Revitalize an older commerical area in your HO community with the Drive-In Oil Change kit! As oil companies headed for the suburbs, older gas stations like this were snapped up by a variety of businesses and are still common today! Features of this detailed Cornerstone(R) structure kit include:
Typical of remodeled/repurposed older stations - fits 1980s to the present
Two drive-through service bays
Inspection pit openings in garage floor
Detailed office area
Includes separate soda machine, air conditioner unit, gas and electric meters
Measures:
- Main Building: 10-1/2 x 9 x 3-3/16inch 26.6 x 22.8 x 8cm
- Large Sign: 7/8 x 7/8 x 4-5/16inch 2.2 x 2.2 x 10.9cm
Molded in five colors and clear plastic
1951-55 White Freightliner Tandem Truck w/ Van Body - Unpainted and Resin Cast Kit
HO PC&F 5241 CUFT - Boxcar - Saratoga & North Creek (SNC) - Single Car #3391
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO USRA Single-Sheathed Boxcar: Maine Central
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Slimy Grime & Fuel Stains Enamel Paint Set (25, 26, 27)
35ml X 3 jars per set
Evans X72 Box car: Penn Central w/ Small Logo - Single Car #266850
Detail Variations:
As operated between 1973 to 1976.
6-pack includes the following numbers:
#266577
#266850
#269268
#269320
# 269827
#269899
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
VIA Rail HEP 1 (2020 to Present)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
HO 70-Ton 12-Panel Hopper - C&O/CSX #141405
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
Acrylic - Light Primer - 2oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO AHM Rivarossi 4-Wheel Passenger Truck Conversion Bolsters (1Pair)
HO RTR 48Ft Husky Stack Wellcar - GBRX #2510
Detailed Information
MODEL FEATURES - 48Ft HUSKY STACK WELL CAR:
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
48Ft well cabable of carrying 20Ft - 48Ft containers on the bottom and up to 53Ft containers on top
HO Grass Tufts - 1/4 inch - Short Mixed Weeds (104pcs)
Walthers SceneMaster HO Scale ready-to-use Grass Tufts are perfect for adding longer grass and weeds in small areas. They are available in realistic lengths and colors to simulate overgrown vegetation in HO and larger scales. Easily mixed and matched with other SceneMaster scenery materials to add realism to your layout!
- Great for adding long vegetation to small areas
- Pre-shaped and ready to use
- Ideal along fences, highway or railroad rights-of-way and more
- Flexible transparent bases
SD70ACu - DCC Ready - Norfolk Southern #7257
NS FEATURES:
-Rebuilt from UP SD90MAC cores at the Juniata Locomotive facility
-Rebuilt units have added rear ditch lights per NS prototype
-Rebuilt units have 5-chime horn per prototype
-High headlight location per NS practice
-All selected road numbers have deck mounted ditchlight placement
-NS style PTC antenna array
LOCOMOTIVE FEATURES:
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately-painted and –printed paint schemes; using railroad supplied paint chips for accuracy
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See-through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE:
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
HO RTR 40Ft Single-Door Steel Boxcar - Delaware & Hudson (Bridge Line Logo) #19685
(yellow, blue)
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. Check out the entire line of Bowser HO Scale ready-to-run boxcars.
HO MP15AC - DCC & Sound - Lake State Railway #1502
Detailed Information
LSRC FEATURES:
MU hose holders on each end
Operating front and rear ditch lights
Air filter box, horn, decal placement, and antenna style per road number
Lake State Railway began operations in 1992. LSRC operates on former D&M lines in the lower peninsula region of Michigan. Commodities carried include aggregates, coal, and grain. In 2016, LSRC acquired two MP15AC locomotives from Union Pacific. 1501 is a former MKT unit, and 1502 was formerly owned by MILW.
LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Windshield wipers
Lift rings
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
NEW FEATURES:
Operating ditch lights (if equipped)
Operating ground lights
Newly designed motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Excellent low-speed operation
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO MLW M420 A/B Set - DC/DCC Ready - BC Rail (Red/White/Blue) #641, 681
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO Union X-3 Tankcar - Seaboard Air Line #073152
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO Chemical Tankcar - Procor #84937
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Wireform safety handrails
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 15inch
High Self Adhesive Marshland Grass Tuft Strips - 10mm (10 strips)
10 6mm high self adhesive Marshland Grass tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.
HO RTR 68Ft Bulkhead Flatcar - BC Rail #66528
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
HO Norfolk Southern Thoroughbred - Train Set
Wheels rumble like the pounding of hooves as this iron horse rounds the bend. Hauling freight with the ease and grace of a champion, the Thoroughbred delivers fun and adventure to your stable of trains. View video below to see this set in action.
This ready-to-run train set includes:
- F7 diesel locomotive with operating headlight
- open quad hopper
- gondola
- wide-vision caboose
- body-mounted E-Z Mate couplers
- 47 x 38 inch oval of snap-fit E-Z Track, including 12 pieces of curved track, 1 piece of straight track, and 1 plug-in terminal rerailer
- power pack and speed controller
- illustrated instruction manual
HO PC&F 5241 CUFT - Boxcar - Olympic Railroad (OLYR) - Single Car #75120
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
Kenworth T680 Sleeper-Cab Tractor - 53ft Dry Van Trailer - Potosinos (Spanish Lettering)
HO 50ft FMC Combo Door Boxcar - Railbox/ABOX (Early) #50034
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Weighted for optimum performance
- Minimum radius: 18 inches
- Body-mounted, McHenry operating scale knuckle couplers
- Fully assembled and ready for your layout
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
Spray Can - Fluorescent Orange (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Mineral Red) #5108
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
N Scale Value Line RTR - AeroFlo Coal Gondola - Canadian National (pkg 6) #2
-A02 Road Numbers: 194130, 194132, 194135, 194186, 194193, 194219
Tru Color Paint - Acrylic - CN Orange - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Scale Pedestal Traffic Lights - Just Plug Lighting - pkg(4)
Product Information
Woodland Scenics N Scale Just Plug Traffic Lights are ready to place right out of the package and come hand-painted and authentically weathered. The Traffic Lights are pre-wired and made for use with the Just Plug Lighting System. Whether at rural intersections or on busy city streets, they add action to any scene. Check out the entire N Scale Just Plug line of lighting and accessories.
Pedestal Traffic Lights are ideal for busy intersections on downtown or suburban streets. Pedestal Traffic Lights are single-faced and the package includes two red lights and two green lights, enough for one four-way intersection.
HO Trinity 3230 Covered Hopper - Greenbrier Management Services (BNBX) #95490
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
The Trinity 3230 Pressure Differential covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
Vallejo 73801 - Model Wash - Weathering FX - Industrial Thick Mud - 40mL Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Blue Grey is recommended for vehicles with a Panzer Grey base color, as well as all vehicles with a similar grey base.
HO Snow Plow - Low Profile - Santa Fe & Other Roads
Details West Snow Plows will help keep the rails clear on your HO Scale layout. Available in several designs to match a variety of prototypes, each part is a detailed metal casting.
42Ft Coil Steel Car - Norfolk Southern Protect III #165945
Features:
Prototypical painting and lettering
See-through walks
Removable hood
Inside floor detail
Cut-levers
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Orange) #505814
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
HO Alco FA-1 - DCC & Sound - Canadian Pacific (Block Scheme) #4010
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO 40ft ACF Modernized Welded Boxcar - Erie Lackawanna #88189
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
9-pin to DCC Medium Plug - Short Harness (1 inch)
HO GE ES44AC GEVO - ESU Sound & DCC - BNSF Railway #7975
FEATURES:
One time run of these roadnumbers, order now - limited quantity available
The most popular prototype diesel in North America
Thousands in service from 2003 to the present
ESU Sound for DCC and DC layouts featuring:
- 4 function outputs with brightness control by CV
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch prime mover sounds
- Compressor
- Dynamic brake
- Multiple realistic lighting effects
21-pin DCC plug
2- or 4-vent dynamic brake vent as appropriate
Easily handles 18 inch radius curves (22 inch or larger recommended)
Six powered axles per unit
LED Lighting includes:
- Correct headlight position per prototype
- Working front ditch lights
Three truck styles to match prototypes:
- Standard high-adhesion
- Steerable (nonworking)
- C4 A1A center idler axle
Same powerful drive as WalthersProto(R) locos featuring:
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant and directional LED lights
Correct profile radiator grilles and rooftop walkway surface details
Molded drill starter points for grab irons - easily added with the GE ES44 Evolution Series Diesel Detail Kit (910-250, sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Fully assembled
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
HO H21A 4-Bay Hopper - Pennsylvania (PRR Black, Plain Keystone) #695513
1961+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SECX #2305
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO RTR 52Ft Mill Gondola - CEFX #30258
Detailed Information
MODEL FEATURES:
Body-mounted McHenry operating scale knuckle couplers
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Razor sharp painting and printing
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
Plastruct 90102 O D 1/16 Butrate Coated Wire (12pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
WHITE
OUTSIDE DIAMETER (O.D.)
1/16
1.6mm
INSIDE DIAMETER (I.D.)
N/A (wire inside)
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
BUTYRATE COATED WIRE Use for piping industrial, residential, commercial and many other model settings. May also be used as round pylons in bridge, pier and other structures.
20Ft Corrugated Containers with Corrugated Doors, American Presidents Line 2pk
3062906(0) and 367086(0)
N Scale 7 Wall Fans & 15 Wall Vents - Laser-Cut Wood Kit
Power Supply - 12V
This is an alternate power supply for use with either the #22-018-1 Power Pack SX or #22-019 Smart Device Controller.
Outputs DC13.5V - 2.2A
HO MLW M420 A/B Set - DC/DCC Ready - BC Rail (Red/White/Blue) #647, 686
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
Pacific Coast Lumber Boat Kit - Tiverton - Unpainted and Resin Cast
Based on the S. S. Tiverton
Owned by Olsen & Mahoney
HISTORY:
The steam ship Tiverton was typical of wooden Pacific Coast Lumber ships known as stream schooners built in the late 1800s and early 1900s. These steam schooners originated when some enterprising mariner placed a small boiler and engine in a sailing schooner. There were designed to carry sawed lumber from ports in northern California, Washington and Oregon to the burgeoning cities of San Francisco and Los Angeles. They ranged in size from about 125 feet to over 200 feet. The Tiverton at just over 150 feet was one of the smaller ones. She was built at Hoquiam, Washington in 1906. In 1933 she ran aground and was wrecked on Humboldt Bar.
HO 20ft Corrugated Container - Container King/CKRU #2 (3pk)
MODEL FEATURES:
- Fully-assembled
- Easily stackable
- Each container is individually numbered
PROTOTYPE AND BACKGROUND INFO:
An intermodal container is a large, standardized shipping container, designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport ? from ship to rail to truck ? without unloading and reloading their cargo. Corrugating the sheet metal used for the sides and roof contributes significantly to the containers rigidity and stacking strength, just like in corrugated iron or in cardboard boxes. International containers have castings with openings for twistlock fasteners 20 feet apart on the eight corners, to allow gripping the box from above, below, or the side, and they can be stacked up to five units high for storage.
Tru Color Paint - Acrylic - NYC Jade Green - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
N Scale Urban Steel Overpass - Kit
With Angled Wing Walls: 7-1/4 x 5-1/2 x 1-13/16 inches (18. 5 x 14 x 4.5cm)
With Straight Wing Walls: 5-15/16 x 6-1/2 x 1-13/16 inches (15 x 16.3 x 4.5cm)
Combine roads and rails easily in N Scale scenes with the Cornerstone Urban Steel Overpass kit. This highly detailed structure is typical of common designs in use from the 1900s on as increasing auto traffic made replacement of grade crossings a better option, and many are still in use today. A realistic addition to commercial, industrial or residential areas!
FEATURES:
- Builds double-track railroad ballasted-deck bridge with two-lane roadway below
- Scale 15ft 6 inch (4.7m) overhead clearance between roadway and bridge deck side girders
- Highly detailed girders, beams and columns with scale rivets molded in medium gray
- Separate wing walls can be installed to fit straight or angled installations
HO 85ft General American G85 Flatcar - Pacific Fruit Express #835202
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
HO 53ft Jindo Container - Milestone MLNU ex-Pacer Set #2 (3pk)
(#889872, 889883, 889897) (BLUE/RED)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting
SmokeBox Graphics Freight Car Data circa 2015
Decal set includes freight car data often missing on other sets along with some updated labels. Sheet includes mostly boxcar data, including door markings, weights, and dimensional data in a common font. Also includes TREAD COND SHOES brake shoe markings, red brake shoe labels, and green cleaning stickers
HO H-6-G - DCC & Sound - Canadian National Railway (Straight Wafer) #1389
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO Greenville 86Ft Double Plug Door Box Car - CSXT (Boxcar Scheme 2019+) #180651
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
CSXT -Boxcar Scheme 2019+- throws a -modern era- repaint into this release mix. This Tangent model replicates the most modern incarnation of the CSXT scheme we have found yet applied to Greenville 86Ft boxcars, starting in 2019. For those keeping score, this is a former Chessie C&O 1978 car, with its 5-grab body style and body mounted brake hardware. The times, they are a-changin, and this car has an updated appearance for 2019-2020+ layouts. Notice the lack of a COTS panel on the paint job, vertical conspicuity striping, the correct placement of the large tackboard near the reporting marks, and the modification of the -third arm- layout on the left hand door. Those yellow-painted grab irons look classy! We even threw in the tiny one-inch 2020 Door inspection data patch, so we apologize to the 2019 guys for technically bumping the era forward one year. This car is ready to roll behind those CSX GEs.
40ft NP 10000-series boxcar: Northern Pacific 1950 Large Monad Mainstreet Scheme #11743
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - Single Painted/ Unlettered Car
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO PS-2-4427 High Side Covered Hopper - TLDX Delivery Yellow Lease 3-1967 #6871
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
TLDX Delivery Yellow Lease 3-1967 wears the popular and common version of the TLDX private leasing yellow. The Pullman leasing lettering is simple, with accurate TLDX reporting marks and data. The side placard adds a bit of pop to this scheme, advertising Pullmans Transport Leasing Division to shippers. These TLDX cars were built in 1967, and that translates to earlier Pullman features like square stirrup steps, center sill supports between the bays, solid end running board supports, Miner gravity gates and ribbed-style roof hatches. The model is equipped with 100-ton Barber S-2 trucks with separately applied brake beams along with rotating Timken caps. This relevant lease scheme is perfect for the 1960s-1980s.
HO Duplex Sleeper - Canadian National - Wet Noodle #1136 / Endeavour
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
Juneco Scale Models Back Up Light - DPGM Pyle Single w/jewels, plastic (2/pkg)
Woodland Scenics Static Grass 12mm 626 Medium Green
Evergreen Scale Models - Opaque White Polystyrene T Shape .257In x 14In (2 pcs pkg)
HO Concession Trailer - Pop-Tastic Popcorn
Spray Can - Ocean Gray (RAF) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
Rock Molds Boulders
Highly detailed, flexible and durable rock molds can be used to cast small boulders, rock outcroppings, top rocks for fields and creeks, or make entire rock faces by combining castings produced with these molds.
Use this mold to make big rocks, used at quarry sites, mining operations, road cuts and more. Mold is flexible and reusable.
5inch x 7inch (12.7 cm x 17.8 cm)
HO 85ft ACF Dome Diner Coach w/lights - Union Pacific (Missouri River Eagle) #7011
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
UPP 7011 Missouri River Eagle was built as UP Dome Coach 7011 in November 1958 and is named for the Missouri Pacific train serving St. Louis and Omaha from 1940 to 1971, MPs first and last diesel-powered streamliner.
Round Speaker - 20mm
This tiny, high-output speaker is suitable for N-scale and larger models.
Dimensions: 20 x 4.2mm(D)
Frequency Response: 750Hz - 9kHz
Power: 0.5 Watts (Nominal) 1 Watt (Peak)
Impedance: 8 Ohms
HO Surfliner Coach w/Lights - AMTK/Redondo Beach #6404
AMTRAK SURFLINER PASSENGER CAR FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurate painting and printing featuring licensed Amtrak paint colors and artwork
- Each car individually named and numbered
- Tinted window glass
- Full end details including train line hoses & HEP receptacles
- Cab cars feature 3 different antenna arrangements per era
- Unique interior details for each car type
- Detailed paint colors including separate colors for floors, walls, seats, tables, control compartment, etc.
- Business class cars feature complete upper & lower service areas
- Cafe cars feature complete kitchen & serving area
- Interior stair & luggage rack details
- McHenry® scale knuckle couplers - Kadee® compatible
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- Packaging securely holds model for safe storage
LED LIGHT EQUIPPED FEATURES:
- LED lighting for long life and reliable operation
- On-board DCC Decoder by NCE – Operates in DCC and Analog (DC) with lighting functions controllable in DCC
- LED Interior Lights
SOUND EQUIPPED MODELS ALSO FEATURE:
- Soundtraxx Tsunami SoundCar decoder w/ exclusive sounds recorded from actual Surfliner cars
- A/C compressor operation
- Doors opening & closing with associated beep
- Generic station announcements with associated beep for PA system use
- Vacuum toilet operation sound
- Clickety Clack rail sound
- Brake system sounds including brake set & application, and emergency brake air dump sound
- Cab cars feature authentic K5LA horn and bell
- Interior LED lights on upper & lower levels
- Working marker lights on car ends
- Cab cars feature working head & ditch lights
Urban Retaining Walls - Kit
Combine roads and rails easily in N Scale scenes with the Cornerstone Urban Retaining Walls kit. This highly detailed and versatile model is adaptable to new or existing layouts, and offers various options to build common designs supporting elevated railroad rights-of-way in areas where increasing auto traffic required eliminate of level tracks and grade crossings. A realistic addition to any commerical, residential or industrial area from the 1900s to the present, the kit features:
-Simplifies modeling elevated tracks in new or existing scenery
-Simulates poured concrete walls built from the 1900s on
-Easily expanded by combining kits and customized with molded cut lines
-Easy to use with Urban Steel Overpass (933-3871) - adaptable to other bridge kits
-Great value with 56 parts molded in concrete gray including:
-8 tall, 4-panel retaining sidewalls each: 4-3/4in Long x 1-1/2in Tall 120 x 38.40mm
-4 tall 3-panel retaining end walls each 3in Long x 1-1/2in Tall 76.2 x 38.40mm
-8 short, 4-panel retaining walls each 4-3/4in Long x 1/2in Tall 120 x 14.4mm
-8 tall connectors
-8 short connectors
-4 customizable interior reinforcing cross pieces
-8 Railings
-8 short wall supports
HO Scale - 1937 Studebaker COE Beverage Truck - Unpainted and Resin Cast Kit
Metallic Black Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO NSC 3650 cf 66Ft Railgon - GNTX #295643
Aurora Miniatures North America Inc. is proud to offer the National Steel Car 3650 cf 66ft Railgon Gondola in HO scale. These Canadian-built modern 66? gondolas were introduced in 2012, they were assigned the GNTX reporting mark and painted in the prominent Railgon scheme with a large Tuscan red TTX logo on a yellow background. They can be found across North America in steel mill service. Similar-looking gondolas were also built for BNSF, Canadian Pacific and other owners. We are offering 20 unique GNTX numbers along with a ?Data Only? version for the first production run.
Illuminator Lighting and Signal Decoder - Light-It - For Use with Woodland Just Plug Lighting System (5-pack)
Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low profile? Barber S-2-A with Timken rotating caps
Wheels: CNC-Machined 36in Wheels
Detroit Toledo & Ironton (DTI) Delivery 1970 Magenta shows off one of the most-requested paint schemes for the Tangent Greenville 86ft Box Car System. We appreciate the patience of DT&I modelers, as we wanted to get this car right with the correct 1970 Greenville body with accurate DT&I Magenta paint and lettering. This Magenta DT&I group totaled 54 cars ? It was also the first group to be delivered for use in the new Ford Brownstown Parts Distribution facility pool. Yes, these cars were pooled, so that means these beautiful Magenta 86ft giants served Ford US Parts Depots coast to coast in the Ford BRO pool lanes. Note the prototype photo on our website that shows a DT&I BRO car behind a GN painted, BN-restenciled SD45 presumably photographed on BN headed to Seattle. The DT&I cars feature the distinctive Brownstown body style, with extra vertical rivet rows at the ends of the side sheets. An accurate End-Of-Car Cushioning underframe shows off the 100-Ton Low profile Barber S-2-A trucks, 36in wheels and Timken rotating caps.
HO Procor 3000CuFt Aluminum Hopper w/Handrails - UNPX/ Procor Wordmark #127246
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
Fox Valley Models N Bi-level Auto Rack
Providence & Worcester
Features:
Die-cast underframe
Finely Molded Details
Etched Metal Panels
Formed Wire
Sharp Painting & Lettering
Multiple Road Numbers
Die-Cast Underframe
Metal Wheelsets
Micro-Trains Trucks & Couplers
HO Scale US&S Single Door Cabinet
Our three-inch 1/16in tube, sold separately, fits down inside this larger diameter (5/64in OD, 0.066 ID) non-removable tube inside the cabinet. This makes a nice flange at the top of the cabinet. These cabinets will accommodate any length mast.
HO Scale Butterfly Style Station Platform Shelter - Kit
Product Information
Butterfly-Style Station Platform Shelters are a great addition to the Walthers Cornerstone HO Scale Union Station kit and other railroad passenger depots. For passengers at any station the platform was the first and last stop for every passenger. Tall walkways allowed passengers fast and easy access to and from trains. The hard surface made it easy to wheel baggage and mail carts into place, as well as supplies for the diner or other cars. And since no one liked being too wet or warm, a roof provided some protection from the elements. As an alternate to costly train sheds, North American railroads tried three distinct styles of station platforms including the Busch, Umbrella and Butterfly types. Of these, the Butterfly (so named because of its up-swept, wing-shaped roof) was cheaper to build and eliminated the maintenance headaches of other designs. Providing plenty of ventilation for engine exhaust and just enough protection from the sun and rain for passengers, Butterfly platforms gained widespread popularity early in the 20th century.
Building a detailed terminal scene for your passenger trains is easy with this kit. Based on the almost universal Butterfly design, platforms of this type can be found at stations in big cities and outlying suburbs where they have served passengers for many years. The kit includes parts for four complete platforms and features a modular design so you can combine multiple kits to make longer platforms. To get passengers to and from trains safely, a pair of optional underground subway stairway entrances are included to add realistic detail without a lot of work. Wooden walkway crossings between tracks, platform benches, detailed steel columns, platform signboards and realistic details are all included. Ideal for use with any steam, transition or diesel-era layout, these train depot platform shelters look great alongside Cornerstone Union Station 933-3094, sold separately, and similar station facilities. The Butterfly-Style Station Platform Shelters kit is one of a wide variety of Cornerstone HO Scale railroad structures.
Great for steam or diesel-era layouts
Underground stairway entrances included
Modular design allows easy expansion with additional kits, sold separately
Molded in appropriate colors
Includes four benches, wooden cart crossings, signboards and other details
Easy-to-build plastic kit
Model Wash - Dark Brown - 35ml Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Brown is recommended for models painted in light or sand colors, and ideal for application on tank tracks and pin washes.
HO 45ft CIMC Container - CMA-CGM
(blue, white)
FEATURES:
- Based on common size & style used worldwide
- Fully-assembled & ready to use
- Colorful paint & lettering schemes
- Separate door latch details
- Realistic loads for WalthersMainline(R) & WalthersProto(R) well cars, sold separately
- Great detail for terminals, highways & industrial scenes
60ft Pullman-Standard Flatcar - Ready to Run -- TTX VTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
PRR X31A Single-Door Boxcar: Shadow Keystone, Late - Single Car #67417
(1957-19560)
Detail Variations:
6-pack includes the following numbers:
#67408
#67417
#70173
#70384
#70410
#76700
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
HO 68Ft Railgon Gondola - BNSF #518550
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (4x6) .043In x .066In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 4 X 6 LUMBER SIZE IN HO SCALE
Built-&-Ready Landmark Structures - Lubeners General Store
Assembled - 7-7/8 x 3-5/8 inches (11.3 x 9.2 cm)
Carrying a little bit of everything for everyone, the local general store was the original place for one-stop shopping. Owners catered to the many needs of their community, stocking and selling a wide range of general merchandise from household items to clothing to food products.
This handsome two-story brick building comes ready to set up shop along any Main Street. Its complete with everything shown, including window awnings, a variety of signs, nonworking exterior lamps, sidewalk displays, right down to the gumball machine!
Lamp Post Street Lights - 3 units
Use to light depots, rail yards, alley ways, sidings, parking lots and more. 20mA/set. RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 1.125 in h x .125 in w (25 mm h x 2 mm w)
Patterned Sheets - HO Scale Tread Plate Sheet
Features
Made of Colored Styrene Plastic
Used for Industrial Over Head Walk Ways
Specs
Scale: HO (1:100)
Width: 12in (300mm)
Length: 7in (175mm)
Plastruct Product Number: 91681
N Scale ACF Type 27 Riveted 8,000 Gallon Tank Car - Champion Oils / Sterling Fuel #6027
Plastruct 91004 ABS Sheet .040 (3pcs pkg)
Specifications In Inches :
Thickness: .040 (1.0mm)
Width: 7 (175mm)
Length: 12 (300mm)
Allen McClelland and His Virginian & Ohio - By Tony Koester
(Softcover, 112 Pages)
Allen McClelland and His Virginian & Ohio from Kalmbach is a look at how one modeler made a profound impact on model railroading, and his Virginian & Ohio became one of the hobbys best-known layouts of all time. Allen pioneered many concepts that later became standards in layout design. The late Allen McClelland encouraged modelers to look at their layouts not as stand-alone entities, but as links in the North American rail system - looking beyond the basement. Take a look at Allens HO scale Virginian & Ohio layout, one of the best-known layouts of all time. This inspirational layout pioneered many concepts that later became standards in layout design.
Allen became well-known not just for his V&Os realistic scenery, setting, and theme, but for showing us how to:
- Use walkaround command control to take advantage of linear track plans
- Choose a railroad name and theme that reflect prototype regions and railroads
- Adopt operating procedures based on prototype practices
Find inspiration in how the Virginian & Ohio was conceived and developed, and get ideas for applying the same concepts to your own layout! Get this historical book on the late Allen McClelland and how his influence helped bring model railroading to where it is today.
HO FGE 57Ft Mechanical Reefer - DCC Ready - UP/ ARMN #991002
Detailed Information
57Ft MECHANICAL REEFER FEATURES:
Available with onboard SoundTraxx sound
Scaled from prototype manufacturers drawings and field measurements
Repaints often vary by road number in the size and style of the reporting marks, car numbers and patch shapes
See-through protective screens on the genset end
Detroit Diesel 2-71 Genset visible inside
End wall corrugation visible inside
Inner refrigerator bulkhead
See through end platforms
Two different exhaust stack types: straight pipe with -flapper- or T-shaped -smokejack- per prototype and era
Full underframe detail including Keystone cushioning, air brake reservoir, control valve, brake cylinder, brake plumbing, and fuel tank
Factory applied end ladders and door closure rods
Trainline hoses with silver ends
Three different coupler cut lever styles per prototype
Body-mounted or truck-mounted brakes per prototype
McHenry operating scale knuckle couplers
100-ton roller bearing trucks with rotating bearing caps
Fully-assembled and ready-to-run
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Machined metal wheels with RP25 contours
Weighted for trouble-free operation
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
Undecorated
Die cast center beam, metal trucks, ribbed back wheels, log bunks and falling stakes. Comes with three unpainted plastic logs and couplers.
HO 55Ft Evans 4780 Covered Hopper - Boston & Maine #5401
Product Information
Expand grain traffic along your HO railroad with a fleet of WalthersProto 55ft Evans 4780 Covered Hoppers! Introduced in 1977 and still going strong today, they can be found handling all types of grains and dried distillers grains used for animal feed. Fully assembled and ready for service, features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint and lettering
Ultra-smooth rolling 36inch RP-25 turned wheelsets
Proto MAX(TM) metal knuckle couplers
HO Yellow Striping - 3 and 4,3/4 inch Widths - Decals
Description: (formerly 87-110-6) Striping - 3 and 4,3/4 Widths - Yellow
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Union Pacific Rack, Trailer Train Flatcar (TTBX) #963118
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
Revolving Tool Holder - With 2 Collets
The Zona Revolving Tool Holder with 2 Collets features a ball-shaped pin vise head fits the hand, while thumb and index finger twist the chuck. This revolving tool holder is ideal for drilling larger holes in soft stock. Includes two collets with capacity of .015inch-p .050inch & .062inch-p .113inch ( .381p 1.27 mm & 1.574 p 2.87 mm) diameter. For drills, taps and reamers. 3-7/8inch overall length.
Capacity Range 1/64inch - 3/32inch
JGSDF Brown Lacquer Finish Paint
Accurately captures the shade of brown seen on Japan Ground Self Defense Force (JGSDF) vehicles
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
Kenworth T680 Sleeper-Cab Tractor - 53ft Dry Van Trailer - Covenant
HO RTR 53Ft Platewall RoadRailer Trailer - Norfolk Southern (Triple Crown) #463509
Norfolk Southern
Triple Crown Medium Logo
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
HO 50ft 100-Ton 4-Bay Hopper - Conrail #498792
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from mid-1960s to mid-2000s
- Standard car for 1980s and later Powder River unit coal trains serving power plants
- Also used to transport stone and other bulk loads
- Die-cast metal underframe for excellent performance loaded or empty
- Sloped sheet braces & update brake gear
- Correct 36 inch turned metal RP-25 wheels
- Proto MAX(TM) metal knuckle couplers
HO Bathtub Coal Gondola - Canadian Pacific (Ontario Hydro) #799711
Built: 10-79
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
White River Productions - Model Railroad News, February 2024 - Magazine
Product News
Locomotives & Rolling Stock
Vehicles & Loads
Structures, Scenery & more
Books & more
HO-Scale Reviews
Landmark Locomotive? Rapido Trains Early Phase U25B Diesel Locomotive
Six-Axle Returns? Hornby Hobbies/Rivarossi U25C Diesel Locomotive
A U-Boat in Blue? Atlas U33B Diesel Locomotive
Rear End Perfection? Tangent Scale Models Wide-Vision Caboose
Tantalizing Tunnel Motors? Athearn SD40T-2 Diesel Locomotive
Kit Classics Adds Caboose? ScaleTrains Steel Cupola Caboose
N-Scale Review
New Mill Gondola? Micro-Trains Line 65-foot Mill Gondola
O-Scale Review
Rebuilt Well and Tall Container? Atlas Rebuilt Well Car and 40-foot High-Cube Container
Book Review
Little Rock? Lots of Possibilities?Barton Jenning?s The Little Rock
From the Archive
HO Collector presents AHM Old-Time Freight Cars
Columns & Departments:
Editorial & Letters
Prototype Profile?Early EMD Six-Axles SD7 and SD9
Timetable
Dealer Directory
Advertising Index
HO Modern Wall-Light (3pk)
FEATURES:
- Common North American-style building lights used in many communities
- Fit popular modeling eras 1890s to present
- Great detail for day or night scenes
- Fully assembled from tough metal parts
- Install in minutes on building walls
- Easy to wire with plug and socket or factory-installed leads as appropriate
- Complete installation and hook up instructions
- Operates on 12 volts DC
N Scale 40Ft Hi Cube Ribbed Side Container - Mitsui OSK Lines
Product Information
Modernize your HO intermodal operations in minutes with these SceneMaster Containers, featuring:
Improved door latch detail
Great detail for terminals and industrial scenes
Realistic loads for any well car
Ready to use
Olive Drab Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO 40ft ACF Modernized Welded Boxcar - Green Bay & Western #623
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Western Pacific (6pkg)
6-Pack includes the following numbers, all individually packaged: #20001, #20006, #20015, #20081, #20112, #20189
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
RTR 52Ft Mill Gondola, GONX/ RailGon #310877
MODEL FEATURES:
Fully assembled and ready for your layout
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
33In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
Open top cars, such as gondolas, have been a mainstay on railroads for decades as they are ideal for carrying large, bulky loads such as coil steel or scrap metal loaded by crane.
Colored Weathering Powder - Medium Earth (1oz)
There are several basic methods and approaches to using these powders and we are sure you will probably develop a few of your own! These powders are intended to make rolling stock, buildings, and detail pieces look old, dirty, dusty, rusty, faded, and generally the worse for wear after being exposed to the elements of weather, travel, pollution, and mechanical wear and tear.
N Scale 2-Bay Hopper - ATSF #82142
These GA-105-class covered hoppers with Bettendorf trucks were built in 1957 in a series of 500 cars.
HO Value Line RTR - 13 Panel Coalporter - Conrail #503044
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO G2 Dash 9-44CW - DCC Ready - C&NW #8613
C&NW FEATURES:
- Prototypically accurate appearance
- C&NW roof vent
- A/C cabinet w/out A/C vents and components per as-delivered detail
- Curved engine compartment hood profile
- Early tabbed dynamic brake intake panels
- Early style dynamic brake exhaust fascia
- #8613 & #8646 Early-delivery units with 40 inch wheels and reinforced trucks
- #8701 Late-delivery unit with 42 inch wheels and GE Hi-Adhesion side frames
- As-delivered features
- Unmodified hood
- Sound version features onboard DCC decoder with SoundTraxx Tsunami2 sound
DASH 9 SERIES LOCOMOTIVE FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Coupler cut levers
- Flexible rubber MU hoses for durability
- Flexible rubber trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Fine-scale Celcon handrails for scale appearance
- Windshield wipers
- Lift rings
- Wire grab irons
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Sander lines
- McHenry scale knuckle couplers - Kadee compatible
- Genesis drive line with 5-pole skew wound motor, precision machined flywheels, and multi-link drive train
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
SOUND EQUIPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
N Scale 52Ft Mill Gondola - Norfolk Southern NS #200323
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Norfolk & Western Rack & Flatcar #412042
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO 50Ft FMC 5077 Double Door Box - Southern Pacific SP #246021
MODEL FEATURES:
Separately applied grab irons, end ladders and brake wheel
Photo-etched cross-over platform
33inch machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
1952 Ford/Cab Over Engine/Railway Express Truck - Unpainted and Resin Cast Kit
HO EMD GP40 - DCC Ready - Wisconsin Central #3023
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
The Rustic Water Tower from Woodland Scenics is a vital part of any city water system. Based on a 1900s water tower, structures like this have been local landmarks for over a century and many are still in use. This steel water tower features an elevated water tank, latticework legs, a center inspection scaffold, ladders and a separate pump house. The tower is factory weathered and features applied graffiti for extra realism. The Rustic Water Tower comes equipped with a rooftop LED aircraft warning light designed for use with the Just Plug(R) lighting system
2 1/8 x 2 17/32 x 5 1/2in
5.39 x 6.42 x 13.9 cm
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SSTX 6 Pack
2018, 2019, 2020, 2021, 2022, 2025
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 50ft FMC Combo Door Boxcar - Missouri Pacific #367263
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Weighted for optimum performance
- Minimum radius: 18 inches
- Body-mounted, McHenry operating scale knuckle couplers
- Fully assembled and ready for your layout
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
Roping Ring, Formed Wire - pkg(12)
Acrylic Flat Colors - Dark Green - 3/4oz (23mL) Bottle
XF-61
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO GE Dash 9-40CW - DC/DCC Ready - Norfolk Southern NS #9773
NS FEATURES:
Front and rear ditch lights (Alternately flash in DCC mode)
High-mounted head light and number boards
K5 horn
Electronic brakes
Graham White Electronic bell
Delivered new in 2003 from GE, NS took delivery of class 9745-9811 Dash 9-40CW locomotives. Some unique features include: electronic bell, high mounted headlight, and electronic parking brake. We are offering both versions of the front cab schemes to choose from!
ROAD NUMBER SPECIFIC FEATURES:
#9754 -White face- scheme
#9773 -Unibrow- scheme
#9806 -Unibrow- scheme
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO 60Ft Gunderson 7550 Double Door Boxcar - TTX #664059
MASTER MODEL FEATURES:
All New Tooling!
Separate ladders, hand brake and door rods
Door stirrup, unique to the 7538
Single or double plug door as per the prototype
Roof with 3 Stanray X-panels and 3 diagonal center panels
Brake arrangement offset to A end of body
Crisp, accurate lettering and paint details
HO 36Ft RTR 3-Dome Tank Car - ACFX #62
Product Information
Add authentic cars to your steam- or diesel-era layout with these 36Ft 3-Dome Tank Cars from WalthersMainline! Serving a wide range of both producing and consuming industries, these cars were actually three tanks in one, ideal for handling smaller amounts, and a greater variety of product at once. Features of these cars include:
One time run of these roadnumbers, limited quantity available - order now!
Prototypes hauled petroleum, chemicals and similar liquid loads in three compartments
In service from late 1920s to 1960s
Detailed underbody with AB brakes
Fully assembled
Correct 33inch turned-metal RP-25 wheelsets
Proto MAX metal knuckle couplers
HO Single Comet Commuter Coach - Montreal AMT (Late Lake Scheme) #727
The Rapido Trains HO scale Comet Cars features:
Designed from field measurements as well as original blueprints and documents.
Full interior detail including individual seats, and unparalleled underbody detail incl. all pipes and boxes
Extremely free-rolling inside-bearing trucks with metal wheelsets
Tinted windows and accurate painting and lettering
All-wheel electrical pickup and advanced circuitry for flicker-free lighting on both DC and DCC layouts
Coaches feature controllable interior and end marker lights using the included magnetic wand
Cab Coach lighting controlled using the magnetic wand on both DC and DCC layouts
HO RTR 65Ft 6inch Mill Gondola - MKT #43717
MODEL FEATURES:
Working drop ends. Gently lift up & push inward to fold ends down.
Separately applied wire grab irons
Interior detailing
Decorated models fully-assembled and ready to run out of the box
Machined metal wheels and RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Minimum radius: 18inch
Tru Color Paint 010 - Acrylic - Black - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Chemical Tankcar - Staley #4933
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Wireform safety handrails
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 15inch
HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Circle Keystone) #727423
1948+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO AutoScenes - Sparky & The Chief
Load up, Sparky, lets take care of those fire safety inspections!
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
LOCOMOTIVE FEATURES:
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
Static Grass Flock 57.7 in(3) - Light Green
Use Light Green to create a spring grass effect.
Static Grass Flock is a fiber product that models grass and/or weeds. It is available in six colors and can be used alone, or with Fine Turf. Place under trees, along ditches or as forest litter. Attach with Scenic Cement. Fiber length 1 - 3mm.
HO RTR Thrall 5-Unit Rebuilt 40Ft Well Car - Trailer-Train DTTX #748273 A-E
(yellow, Large Red Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft on both single and five-unit cars. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers - limited quantiuty, order now!
100- and 70-ton roller bearing trucks
Correct 36inch and 33inch RP-25 turned metal wheelsets
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
Proto MAX(TM) metal knuckle couplers
HO UAC TurboTrain Additional Coach: Early Amtrak
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model.
HO ET44 Tier 4 - DCC Equipped - CN Heritage/Wisconsin Central #3069
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO EMD GP39-2 - DCC & Sound - Delaware & Hudson #7405
Detailed Information
D&H FEATURES:
Phase 1 body with chickenwire grilles
Illuminated number boards and class lights
Blomberg B trucks with Hyatt bearings
Leslie 3-chime horn
Small EMD front plow
Large Sinclair antenna
Cab roof rain gutters
The D&H received all 20 of the Readings GP39-2s when Conrail was formed in 1976. They continued to operate in patched green and yellow paint for several years, but many were subsequently repainted into D&Hs attractive solid blue and yellow scheme. When mixed in with other EMD and ALCO models, they added a splash of variety to passing trains. We are offering 3 different versions of the blue scheme to add to your fleet!
ROAD NUMBER SPECIFIC FEATURES:
#7404
Solid blue repaint with silver trucks and yellow plow
#7405
Blue repaint with solid yellow nose and plow
#7419
Blue repaint with striped yellow ends and yellow plow
GP39-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Safety Striping - Assorted styles - 5 and 3 inch Heights - Waterslide Decals
HO 68Ft Railgon Gondola - Southern Pacific #365190
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO USRA Single-Sheathed Boxcar: Ann Arbor
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Scenic Accents - Sitting & Waiting (7pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
This set includes two men, three women, a child and a dog. A mother and her child wait, perhaps for a bus. A dog sits close by. A woman and man sit, engaged in conversation and another man and woman sit close together, just enjoying each others company.
Power Cab DCC Starter System - 2 Amps
An entire DCC system in the palm of your hand! The Power Cab system can operate one or two HO locomotives. Installation is a snap. Hook two wires to your track and plug in the cab. Then you are off and running trains!
The Power Cab kit contains:
- Power Cab
- 7ft Power Cab Cable
- PCP Power Panel
- Power Supply
- Pro Cab Coiled Cord
- Manual
The Power Cab represents an Entry Level starter system for small layouts but has all the same features as the high end 5 amp PH-Pro. Its limitations are found in the number of expansion options it can connect to and support.
The PowerCab is well-liked because it is a full featured NCE DCC system with a true programming track output capability designed to handle Sound Decoders without any programming issues. Some people with a 5 and 10 amp PH-Pro system purchase a Power Cab system for the full programming track capability and to add an additional throttle for the layout.
The Power Cab offers the best Programming Track capability of all the NCE systems. It offers a safe low current programming track output mode where it is safe to test decoders. At the same time, the programming track current from the Power Cab has been raised enough to accommodate the special needs of sound decoders which can have problems working properly with older style programming track outputs. No 3rd party programming track booster is required when using a Power Cab.
Up to 256 turnouts can be DCC controlled using DCC accessory turnout decoders. They can be controlled from the PowerCab throttle or any NCE throttle with an accessory control button.
The Power Cab allows you to add up to 3 NCE cab bus based accessory devices to the system using 3 special cab addresses. This does NOT take away from the number of throttles [6] you can use with the Power Cab system.
N Scale 50ft FMC Combo Door Boxcar - Railbox/ABOX #51952
Era: 2010-Present Day
MODEL FEATURES:
- Screw mounted, Roller bearing style trucks
- Scale profile brake wheel
- Accurately painted and printed for prototypical realism
- Body-mounted, McHenry operating scale knuckle couplers
- Machined metal wheels operates on Code 55 and 80 rail
- Weighted for optimum performance
- Highly detailed, injection-molded body
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
HO SD90MAC-H Phase I - DCC & Sound - Union Pacific #8503
Detailed Information
UP FEATURES:
#8503 & #8500 represent the first renumbering, originally delivered as #8203 and #8160 respectively.
#8509, #8512, and #8520 are modeled with the starter capacitor removed and the EOT mounted further forward on the fuel tank.
Union Pacific became the only buyer of the SD90MAC-H, known to them as SD90AC, when Canadian Pacific transferred their order to the Phase 2 variant. The first 7 were considered pre-production units and wore 2-3 numbers during their lifetime. The 8500 series we are offering represents the second and third order of SD90MAC-Hs that were delivered between 1997-1999 and before their final renumbering to the 8900 series.
SD90MAC-H SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and ?printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO - Leslie RS3R3 3-Chime Air Horn - Lost Wax Brass Casting
Track Nails - 1/2 inch Long (500/pk)
Open holes in flex track ties with a small drill bit - hammering the nails through without opening the holes first can distort the track.
70 Ton Hopper Canada Southern
Ready to Run
Crisp details and sharp painting and printing
Metal wheels
Knuckle couplers
Metrolink #857
Teal Ribbon Repaint
Model Features:
Scaled from field measurements & diagrams of a GO F59PH
End metal handrails with plastic stanchions
Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
All-metal etched grilles
Full cab interior
Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
Operating headlights, rear light, and ditch lights
GO units feature functioning tri-color class lights (white, green and red)
American units feature functioning red marker lights
Accurate sounds recorded from a GM 12-710G3A
DCC/Sound units come equipped with an ESU LokSound decoder
HO Code 83 Nickel Silver DCC Friendly #5 Turnout - Right Hand
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 83 rail!
Combining great looks and great performance in a complete system, each item comes fully assembled and features:
-Thin profile ties in realistic dark brown with enhanced wood grain detail
-Fine profile molded spike and tie plate details on each tie
-Spike-mounting holes positioned next to the rail
-Molded starter points on underside of ties for fasteners
-Custom formulated nickel silver rail for outstanding electrical conductivity
In addition to these details, each DCC-friendly Code 83 Turnout features:
-Snap-action points
-Solid rail points for better conductivity
-Isolated frogs with built-in jumper for powering as desired
-Current jumpers entering and leaving the frogs
-Insulated tie bar
Flat Brushable Acrylic - Roof Brown - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
HO GP40-2 Diesel - DCC Ready - Chessie/CSX #6129
CSX - PATCHED FEATURES:
- Offered by popular demand
- Correct horn per prototype
- Side hood mounted bell
- Chessie -mail slot- battery box doors
- Front and rear Chessie style rock plows
- All-new artwork provided by noted CSX railroad expertsy
GP40-2 LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO All-Weather Window Set - 3 Pane (6)
Detailed Information
All Weather Windows (6-pack)
Each all weather window contains a clear -window- glazing insert. Kit contains parts to build six individual all weather windows.
HO Master Series - GE B23-7 - DCC/Sound - Finger Lakes Railway #2309
FEATURES:
The Atlas B23-7 locomotive model includes such optional/road name specific details as:
- Pilots with and without anti-climber
- Cab headlights or low-nose headlights
- Cab with 4 or 2 side windows
- Phase 1 or 2 sill/chassis used where appropriate
- Bell mounted under the sill or on the long hood
- FB-2, AAR type B, or Blomberg truck side-frames used where appropriate per road name
ADDITIONAL FEATURES:
- Separately-applied scale detail parts include: windshield wipers, metal grab irons, coupler cut levers,
multiple-unit hoses, snow plow, train line hoses, fine scale handrails, and more!
- See through step detail on sill
- Etched metal radiator grilles
- Painted crew members
- Factory-equipped with AccuMate knuckle couplers
- Coupler pocket designed to accept AccuMate Proto-couplers
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Directional lighting
HO Greenville 86ft Double Plug Door Box Car - Missouri Pacific #271513
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Release Date: August 2021
Missouri Pacific (MP) -Original 1968- represents another frequently-requested paint scheme! MP ordered five different lots of Greenville auto parts box cars, and this lot was the largest at 157 units. The prototypes were delivered with MP -buzzsaw- logos on the right side of the car, and economical -Cushion Car- lettering on the left. Of course, as any self-respecting MP modeler will tell you, there is so much more to MP lettering than slapping a buzzsaw on the car. Tangents industry-leading artwork has duplicated the distinctive and intricate MP lettering style from the reporting marks down to the smallest stencils. The cars offered in this run were assigned to Fords Chicago Stamping Pool, resulting in an accurate Chicago Heights, Illinois return route stencil. Center-of-Car Cushioning draft gear detail variation with yellow end handles? Check. Distinctive Klasing 1150 hand brake? Check. Accurate Apex crossover platforms? Check. 100-Ton -Low Profile- Barber S-2-C Roller Bearing Trucks with 36inch wheels and rotating Timken caps? Check, check and check! These cars lasted in original paint into the late 1980s and went everywhere. Our models are available with your choice of six road numbers, with three cars showing 8-68 build dates and three cars showing 9-68 build dates. Collect all six while you can!
HO Ditch Lights w/Lenses - Pilot-End Mount - GE, EMD (2pk)
ECoSLink Terminal Bus Distribution Plate - 6 Slave Jacks With 0.9m Cable
If your train layout is growing and you need additional ECoSBoost boosters and ECoSDetector feedback modules to connect to your ECoS command station, and you are running out of connectors, you should buy the ECoSlink Terminal!
More room:
The ECoSlink Terminal will be connected to the ECoS or central station via the provided bus cable to the extend jack. It offers on the front panel two jacks for hand controllers (e.g. mobile station) and at the back four sockets for devices mounted under the layout. These include mainly ECoSBoost booster and ECoSDetector feedback modules.
The ECoSlink Terminal can provide power to all attached devices either from the ECoS power supply, or for a section from an external power supply through the ECoSlink themselves. This is especially useful for larger systems with many hand controls, boosters and feedback modules.
More distance:
If more than one ECoSlink Terminal is used, the terminals can be connected to each other with standard Ethernet patch cables with RJ45 connectors. These patch cables can be purchased in any computer store in any length.
More organisation:
Each ECoSlink Terminal is usually at the front panel of the layout installed: Only the front panel is visible. This reduces the cable clutter under the layout.
More flexibility:
The ECoSlink Terminal can be used on ECoS and central station. The CAN bus is only passively distributed together with the supply and booster cables and the termination is ensured. The function is transparent for the digital control unit. Since an interference in the communication of the bus does not take place, thus alone decide the control unit and the connected devices whether they will work together.
HO 50Ft PS 5277 Box - Detroit & Mackinac D&M #2223
MODEL FEATURES:
Single 10Ft Pullman Standard door
Separately applied grab irons, end ladders, and brake wheel
Photo-etch coupler cross-over platform
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO Extendible Container Chassis - Kit - 40Ft to 48Ft (2pkg)
Product Information
This Walthers SceneMaster Extendible Container Chassis is a must-have accessory for your HO Scale intermodal terminals, industry and highway scenes. Typical of equipment used all over North America from the 1980s to the present, it can be used with most containers (sold separately) from 40Ft to 48Ft long and semi tractors (sold separately). The kit includes parts for two complete chassis molded in black plastic, and illustrated instructions.
Prototypes used for hauling containers from container yard to end user
Two complete chassis per kit
Use with SceneMaster and other HO Scale Intermodal Containers
Parts molded in black
Easy-to-build kit
N Scale 1930s 50ft Highway Overpass - Deck Only
The Rix Highway Overpass for N scales is modeled after the bridges built during the 1930s and 1940s to span over railroad tracks. This style of bridge was used all over the country and is common to most people. The Rix Highway Overpass consist of 50 foot spans which interlock together so that any length bridge can be built.
Dimensions: 50 X 25 scale feet
3-3/4 x 1-7/8 inches
Kit includes (1) 50 foot overpass. Beams, Roadway, Early Railing(only). No pier.
HO Scale SD30C-ECO - DC/DCC Ready - Canadian Pacific #5000
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
SOO Line/Lake State #6241
Detailed Information
NEW FEATURES FOR ALL SD39S IN THIS ANNOUNCEMENT:
All-new LED lighting
Rubber MU hoses for durability
Photo-etched stainless steel windshield wipers
SOO FEATURES:
Former MN&S SD39
All-weather cab window on engineers side
Leslie S3L horn
Rear MU catch-tray
AAR loop style coupler cut-bar
Firecracker antenna
Cab-mounted Xenon strobe; effect with DCC/Sound version
Winterization hatch
2600 gallon fuel tank
In February 19, 1985, the Soo Line purchased the bankrupt Chicago, Milwaukee, St. Paul and Pacific and the smaller MN&S Railroads were both merged into the Soo Line Railroad effective January 1, 1986. To cut costs, the Soo Line created the Lake States Transportation Division (LSTD) on February 10, 1986 to operate the less-important lines, including the ex-Wisconsin Central line between Chicago and the Twin Cities.
This page is based on the copyrighted Wikipedia article SOO Line; it is used under the Creative Commons Attribution-ShareAlike 3.0 Unported License (CC-BY-SA). You may redistribute it, verbatim or modified, providing that you comply with the terms of the CC-BY-SA.
LOCOMOTIVE FEATURES:
Fully assembled and ready-to-run
Separately applied wire grab irons
Separately applied air tanks
Coupler cut levers
Rubber MU hoses
Photo-etch stainless steel windshield wipers
Fine scale handrails molded in engineering plastic
Non-sound version features 21-pin NEM DCC plug
See-through dynamic brake and radiator fans
Curved radiator fan grab iron
Exhaust stack
Frame mounted bell (unless noted)
Detailed 4000 gallon fuel tank (unless different capacity is noted)
Flexicoil-C trucks with high or low brake cylinders (per prototype)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body featuring new tooling
Painted and printed for realistic decoration
See through cab windows
Bi-directional LED lighting
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18in
Recommended radius: 22in
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard Econami sound decoder by Soundtraxx
Engine startup sound sequence
Dynamic brake sound or Non-Dynamic Straight to idle on F4
Extra prime mover and horn sounds exclusive to Athearn version Sounds recorded from a real EMD 12-645E3
Multiple bell sound files user configurable via Configuration Value (CV)
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Current Keeper ready with on board expansion plug
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via CV changes
PROTOTYPE INFO:
In 1966, EMD updated its locomotive catalog with entirely new models, all powered by the new 645 diesel engine. The SD39 had 2,300 hp from a turbocharged V12. The SD39 had the smallest prime mover of the SD locomotives in the EMD catalog. 54 were built for American railroads.
This page is based on the copyrighted Wikipedia article EMD SD39; it is used under the Creative Commons Attribution-ShareAlike 3.0 Unported License (CC-BY-SA). You may redistribute it, verbatim or modified, providing that you comply with the terms of the CC-BY-SA.
Coarse Turf - Fall Rust - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
HO RTR 60Ft Flatcar - C&EI #46011
MODEL FEATURES:
Separately applied end details and brake wheel
33inch machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Decorated models fully-assembled and ready to run out of the box
Minimum radius: 18inch
N Coupler Conversion Kit - Kato Japan Proto (2 pair)
5/32inch x 5/16inch Rectangular Brass Tube - 12inch long x 0.014inch Thick
Rectangular Brass Tube 0.014inch Wall Thickness x 12inch Long (1/pkg)
VIA Rail HEP2 Current Scheme Business (Grey) (2020 to Present)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
Ultrafine high quality pigment for modelling.
The definitive collection of pigments designed exclusively for modelers. A series of basic necessary and frequently used colors mixable between. AK Interactive pigments are much finer than any of the existing products on the market and contain nearly 3 times the quantity of other leading brands at a lower price .These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve. Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.
HO Scenic Accents - Spectators (8pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
A set of people - two children, one woman and four men - who could be watching any sporting event, parade or maybe a concert. One man sits with a small cheering child and another man sits relaxing, with legs crossed and hands behind his head. The woman blocks the sun from her eyes, another man holds a child on his shoulders and the fourth man raises both arms, cheering.
HO 26Ft Can-Car Dry-Van Trailer - Reimer Trucking #3768
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
HO SD70M - DCC & Sound - EMDX/Maroon/Black #7024
Detailed Information
EMDX FEATURES:
Solid maroon/black scheme
Large EMD front plow
Round EMD style front ditch lights
Can-style roof antenna
Early EMD trucks with hidden bearings
During 1995, EMD built 22 SD70Ms for their lease fleet, including 3 official demonstrators built in 1992. Painted in 2 schemes (solid EMD maroon and black, and maroon, grey and silver), EMD was able to provide many different railroads to test and compare their new 710 prime mover to other current models. These could be seen all over the US and added a splash of color when mixed in locomotive consists. By the early 2000s, they were sold to CSX and eventually painted into CSX colors.
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Spray Can - Metallic Gold (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 53Ft Gunderson Husky-Stack Well Car & Containers - Arkansas & Oklahoma AOK #73609
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
HO Flexi-Van 40ft Trailer - Milwaukee Road #3 (2pk)
(logo and Flexi-Van Placard; side doors)
Capture the color and variety of early intermodal operations with SceneMaster flexi-van trailer 2-Packs! Introduced in 1958 with removable wheels for use on specially-equipped flexi-van flatcars, they were later converted to standard 40ft trailers for road and rail service and served into the 1980s.
FEATURES:
- End or side doors as appropriate
- Detailed wheels and bogie with landing gear
Tsunami2 Digital Sound Decoder - 21-Pin NEM form factor - Electric Locomotives
Dimensions: 30.5 x 15.5 x 6.5mm
Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output)
Function Outputs: 8
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
The NEW TSU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more!
The TSU-21PNEM8 can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches.
Athearn Genesis HO 13,600 Gallon Acid Tank Car, UTLX #11677
Athearn Item #: ATHG25627
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Two different body phases (early and late)
Many separately applied details
Etched metal walkways
Different top platforms as appropriate per prototype
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18in
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry (TM) scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
HO Trenton Works 6348 CN Boxcar - Canadian National (w/ Conspicuity Stripes) #598244
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
Conifer Tree Value Pack - Ready Made Trees
4 - 6inch 10 - 15cm Tall pkg(24)
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors.
HO SW1000 Switcher - DCC & Sound - Rio Grande (D&RGW) #149
ETA: June 2023
Detailed Information
DRGW FEATURES:
Roller Bearing trucks
Sinclair antenna
Spark Arrestor
-Loop- style cut levers
Rio Grande purchased ten SW1000s in two groups, the first one in 1966 and the second group in 1968. The second group consisted of three units, numbered 147-149. They differed from the first in that they came equipped with roller bearing trucks and a slight variation in the striping on the front of the engines. This release represents the second group.
SW1000 LOCOMOTIVE NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SW1000 LOCOMOTIVE STANDARD FEATURES:
Lit ground lights
Detailed cab interior
Drop steps unless noted
MU stands
Exhaust stack
Printed numberboards
Fine scale handrails
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Cube Speaker for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Excellent low-speed operation
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
B-8 - HO 3/4in Green Jewels (12/pkg)
HO SCALE - BUT CAN BE USED IN OTHER SCALES - MEASURES 0.055 inches
HO EMD SD9 - DCC & Sound - Baltimore & Ohio #771
Baltimore & Ohio
- Correctly oriented cab interior for long hood forward operation
- Single fuel tank (First time done on a plastic model!)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO 50ft Covered Gondola - SOO #67479
MODEL FEATURES:
- 70-ton Roller Bearing trucks
- Removable cover
- Separately-applied brake wheel
- Weighted for optimum performance
- 33 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Body-mounted McHenry operating scale knuckle couplers
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inch
PROTOTYPE AND BACKGROUND INFO:
Gondolas are low-sided railroad cars that are used for hauling bulky loads that don not need protection from the weather. The Roundhouse 50ft gondola is representative of larger cars that began appearing on the rails in the early 1950s, and many survive today working for modern roads and contractors.
HO ET44 Tier 4 - DCC & Sound - CN/100th Anniversary #3237
Road number 3108 Has a black cab roof; does not have the circle graphic on the nose
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO MLW M420 - DCC Ready- Ontario Southland Railway(Red/White/Blue) #644 Otter Valley Railroad Exclusive
Each model comes with a signed certificate of authenticity from CEOs of Ontario Southland and Otter Valley Railroad
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
Built-&-Ready Landmark Structures - Dugans Paint Store
Assembled - 4-19/32 x 3-5/8 x 4-1/2 inches
(11.6 x 9.2 x 11.4cm)
Color your city scenes with Dugans Paint Store. The fully assembled model is custom painted, expertly weathered and loaded with architectural detail. Accessories include full roof detail with ductwork, custom signage, colorful awnings, benches, a fire escape and more. Includes window treatments and dry transfer decals plus a first-floor printed interior and one warm white LED light, compatible with the Just Plug Lighting System. 25mA RoHS compliant.
Yellow
Covers over 500 linear feet. Mark road stripes, crosswalks and parking lot lines.
Apply onto Top Coat Asphalt or Concrete.
Atlas - N Scale GP-9 TT - Gold DCC Sound - Toronto Hamilton & Buffalo #403
Features:
Powered low friction drive
Blackened metal wheels
Dual brass flywheels
Directional lighting
Golden-white LEDs
AccuMate couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
AccuMate couplers are made under license from AccuRail, Inc
HO Alphabets - Railroad Gothic - White - Waterslide Decals
Description: Alphabets - Railroad Gothic - White / HO Scale
Heavy-Duty Fire Dept. Ladder Truck - Assembled -Red
Ladder companies have always had a critical job at any fire, from rescuing people trapped inside, to assisting engine companies in getting high-pressure streams of water into the heart of the flames.
A must have for any HO Scale city, this model is complete with an extendable, rotating aerial ladder.
Each SceneMaster vehicle is a highly detailed replica, using diecast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
HO Ranch House with Attached 2-Car Garage - Kit
HO homebuyers are sure to love this new Cornerstone Ranch House with Attached 2-Car Garage kit! A signature home in subdivisions from the postwar years to the present day, optional parts are included to build one of two distinct versions and for easy customizing, just like the prototypes. Other features include:
- Perfect addition to HO city or suburban subdivision
- Built by the thousands after WWII - still popular today!
- Typical of later construction w/attached two-car garage
- Includes 2 different front walls - build with entrance at left or right - plus optional doors and picture windows for easy customizing
- Separate gas and electric meters, nonworking porch lights, modern mail box - all included
- Colorful printed curtains
- Measures: 7-3/4 x 4-3/16 x 2-3/8 inches (19.6 x 10.6 x 6cm)
- Molded in three colors with clear acetate
Vallejo 73827 - Model Wash - Weathering FX - Moss and Lichen - 40mL Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Blue Grey is recommended for vehicles with a Panzer Grey base color, as well as all vehicles with a similar grey base.
HO EMD FT A+B Set - DC/DCC/Sound - Burlington (CB&Q) #105-A + 105-B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO 89ft Thrall Bi-Level Auto Carrier - BNSF #300110
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Western Pacific #20112
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO RTR ACF 2970 Covered Hopper - ACF Demo #44586
Detailed Information
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons and stirrup steps
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple road numbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
Acrylic - Safety Yellow - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
53Ft High Cube Container - CP - Red (2-pack 732333 and 732382)
2020 Release
Detail Variations:
All-new numbers
CPPU 732333
CPPU 732382
The Rapido Trains HO Scale 53ft container is a beauty way to go. The insulated dry boxes are ubiquitous to intermodal trains across Canada and the United States. While a good portion of these containers can be found on domestic trains across Canada, they are also seen throughout the US Midwest and as far south as New Orleans.
The containers will also come with an optional heater box and fuel tank, correctly decorated and installed as appropriate for each paint scheme. All containers come assembled with an easily-removable floor so that additional weight can be added as-desired by the end customer.
Available in a wide range of paint schemes including both railway-owned containers as well as those owned by various transportation and shipping companies.
HO - 24Ft Ribbed Ore Car w/Load - B&LE #20620
Detailed Information
MODEL FEATURES:
Removable load
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied brake wheel
Machined metal wheels
Weighted for trouble free operation
Solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 15inch
PROTOTYPE AND BACKGROUND INFO:
Iron ore is a rock from which metallic iron can be extracted. About 98percent of the mined iron ore is used to make steel. Many railroads around the great lakes have unit trains that transport mined iron ore to transport via barge for processing. These trains are very distinctive with train sets of small cars carrying very heavy loads of dense iron ore.
GMD SD40-2f - DCC Ready - CP (Round Porthole Sill Dashes) #9018
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
HO EMD FT A+B Set - DC/Silent - Northern Pacific (NP Pine Tree Scheme) #5402A+ 5402B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO MLW M630 - DCC/Sound - PGE #713
(Two tone green w/lightning stripe, face mounted ditch lights)
Ready To Run and Fully Detailed!
Features:
- MU Hoses
- air hoses
- windshield wipers
- operating headlight
- window glass
- can motor
- flywheels
- blackened nickel silver wheels with RP25 flanges
- knuckle couplers
- handrails installed
DCC and Sound version features LokSound V5 decoder.
Analog (DC) version has 21 pin socket for DCC module. (recommended decoder - ESU #59629)
Sound Retro Fit kit C628 loco: #691-1225
N Scale Switching Siding Set - V4
Includes:
- Switching Siding (2 #4 Turnouts, switch controllers, and straight track)
- Two drop tracks provide an ideal companion to the V3 rail yard set
HO 4700 Covered Hopper - New York Central (946H Delivery Gray 1-1965) #886217
Truck: Tangent 100-ton Barber S-2 trucks with rotating bearing caps
Wheels: CNC-Machined 36 inch wheels
New York Central (NYC) Lot 946H Delivery Gray 1-1965 shows us the first order of GATC 4700 covered hoppers. This NYC group utilized GATCs earlier 13-post body style and were delivered in gray with the NYC cigar-band graphics. These models feature a high-mounted Miner 6600 power brake with a separate short release lever and modern brake wheel. Take a moment to fully appreciate the unmistakable General American roofline, with the edge rivets, huck bolts, roof ribs and those gorgeous roof hatches with separately applied (metal!) grab irons and detailed lock mechanisms. Underneath, these NYC cars were delivered with Wine Gravity Gates with their distinctive, angled bracing. The cars were painted in a medium gray, not to be confused with the Despatch Shops-built 4700s that were a light gray. NYC modelers deserve accuracy, and we take great care to execute the lettering, from the reporting marks and logo down to the small paint code triangle and trust plate. Its all there. And more importantly, its all accurate. Speaking of the logo, we love that classy NYC cigar band mounted on a stand-off plate spanning three body ribs. Its time to haul grain!
HO Scale 80s GMC Brigadier 9500 Tractor Kit
This 1980s Era GMC workhorse is ready for your hauling needs. Precision cast pewter wheels, tires and details combined with a resin cab are designed for easy assembly and painting. Clear parts enhance the finished model.
N Scale Mast-Arm Traffic Lights - Just Plug Lighting - pkg(4)
Product Information
Woodland Scenics N Scale Just Plug Traffic Lights are ready to place right out of the package and come hand-painted and authentically weathered. The Traffic Lights are pre-wired and made for use with the Just Plug Lighting System. Whether at rural intersections or on busy city streets, they add action to any scene. Check out the entire N Scale Just Plug line of lighting and accessories.
Mast Arm Traffic Lights hang over part of the intersection and are used for intersections located on suburban or small-town roads. They are single-faced and the package includes two red and two green lights, enough for one four-way intersection.
HO SD38 - DCC Ready - B&LE #867
BLE FEATURES:
Later large paper air filter box dynamic brakes, cab mounted gyra-light (upper light only), smaller fuel tank, ditch lights, no plow, rear brake wheel, extra jacking pads, yellow frame stripe, painted lower steps.
ROAD NUMBER SPECIFIC FEATURES:
#866
- Leslie 3 chime horn
- black painted left side walkway
- front and rear ditch lights
- battery danger decals
- modern loop style coupler cut lever
#867
- Leslie 3 chime horn
- front and rear ditch lights
- red coupler cut lever
#868
- Silver P3 horn and cab light housing
- Front ditch lights
- repainted nose and battery box effect
- faded lower steps effect
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO NSC Ballast Hopper - Amtrak #11708
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
60ft Pullman-Standard Flatcar - Ready to Run -- BNSF Railway
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Evergreen Scale Models - Opaque White Polystyrene H-Column .188In x 14In (3 pcs pkg)
Kit - 10-1/2 x 4-15/16 x 3-1/2 inches - 26.6 x 12.5 x 8.8cm
Revitalize your HO business community with the Modern Shopping Center II from Cornerstone, featuring three stores in one compact, contemporary structure! The model features a decorative front wall for added realism, detailed brickwork, large glass windows and entry doors, and colorful signs for a variety of businesses. It looks great alongside the Modern Shopping Center I (933-4115) or The UPS Store(R) (933-4112), both sold separately. Plastic parts are molded in 3 colors.
Trinity 3230 Covered Hopper - Chicago Freight Car #3092
FEATURES:
All new tooling
Ready to run
Injection molded plastic
Fine scale detail
Separately applied wire grab irons
Separately applied wire cut levers
Etched metal roofwalks
Crisp painting and printing
HO HEP E8A + A Set - DCC & Sound - Illinois Central (Executive - Gray & Black) #100/101
The IC and CN E9A Details Include:
Photo courtesy of Craig Walker
Correct HEP muffler and hatch
Modified pilots
Blanked sides with appropriate grille work
Roof-mounted cooling coils
Non-skirted fuel tanks
Hyatt roller bearing journal covers
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Accurate E8 sounds provided by ESU LokSound
Complete lighting effects headlights, recessed ditch lights in nose, class lights, backup lights, ground lights, cab lights and more. (Not all lighting features will work in DC mode.)
Numerous road-specific detail parts in both plastic and etched metal.
60Ft PS-1 Boxcar - Grand Trunk Western - Blue #383414
Beginning in the 1960s, automakers approached rail carriers with the desire for larger freight cars to transport auto parts from suppliers to manufacturing centers. In response, the 60Ft auto parts boxcar was introduced. Carrying a wide variety of auto components including engine blocks, transmissions, brake drums, and others, these cars were a fixture throughout North America for the next four decades and can still be found in service today. Often times, entire trains of auto parts and related cars could be seen near major production facilities as automakers switched to just-in-time delivery methods, requiring prompt deliveries from the railroads providing service. It was common to see trains consisting of 50Ft, 60Ft, and 86Ft boxcars, specially modified flat cars to carry lightweight chassis, and autoracks all destined for one auto or truck manufacturing facility. As the auto industry supply chains evolved and manufacturing facilities were consolidated, many of the 60Ft boxcars were used in other markets and could be found hauling a variety of goods including appliances, paper goods, cardboard, and similar items.
HO EMD FT A+B Set - DC/Silent - Burlington (CB&Q) #108-A + 108-B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
F30A 50Ft Flat Car: Conrail MOW #59721
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
HO Lightweight Coach - GTW - 1954 Scheme #4884
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO RTR 68Ft Bulkhead Flatcar - Trailer Train TTPX #82119
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
Evans X72 Box car: Penn Central w/ Small Logo - Single Car #269827
Detail Variations:
As operated between 1973 to 1976.
6-pack includes the following numbers:
#266577
#266850
#269268
#269320
# 269827
#269899
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
Athearn Genesis - HO ACF 4600 3-Bay Centerflow Hopper - Chicago & Eastern Illinois #718533
Estimated time of arrival: May 2021
Detailed Information
MODEL FEATURES:
Three body styles:
Early- High side ladder & brake wheel, single side stiffener
Mid- Low brake wheel, short side ladders both ends, single side stiffener
Late- As above but with double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble free operation
Genesis 100-ton trucks with 36Inch machined metal wheels and animated spinning roller bearing caps
C&EI FEATURES:
Era: Late 1970s+
C&EI: As-Delivered, Late body with stiffener ribs and low brake wheel.
PROTOTYPE AND BACKGROUND INFO:
The 3-bay CenterFlow covered hopper first entered service in the mid-1960s, built by American Car and Foundry. The cars handle loads such as grain, corn and similar bulk commodities. The Centerflow design relies on the cars rounded body to provide structural strength - eliminating the traditional center sill, and making gravity unloading easier. Our 3-bay car represents the common 4600 cu.ft. capacity version. The railroads looking to replace their aging 40Ft box cars in grain service needed a modern hopper design - one that could operate within the tighter Plate B clearances for light branchline and industrial service. ACFs design won them many contracts from a plethora of railroads. One can find these cars still in revenue service today in grain trains and other similar service.
Specifications
PROTOTYPE MANUFACTURER: American Car & Foundry
TRUCK STYLE: Genesis 100-ton
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1970s+
Minimum Age Recommendation: 14 years
Is Assembly Required: No
N Scale Swing Motion Caboose Truck w/ Generator, no coupler (1pair)
HO NSC Ballast Hopper - Union Pacific (Late) #919259
1990s+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO NSC Ballast Hopper - Herzog (Early) #6388
1977+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
First Union Rail (FURX) - Leasing Diesels
HO SD40T-2 - DCC Ready - Potash (WRIX) #35022
ETA: May 2023
Detailed Information
WRIX FEATURES:
Cab air conditioner
Operating front and rear ditch lights
Large snowplows
ROAD NUMBER SPECIFIC FEATURES:
#35021
Former SP unit
blank SP nose UDE light & cab gyralight
whip antenna on ground pane with conduit
modified L window
#35022
Former DRGW unit
blanked nose class lights
small sinclair antenna
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Photo-etched windshield wipers
Separately applied air tanks
LED Lighting
HTC truck sideframes
Welded ECAFB
All-wheel electrical pickup
See-through dynamic brake fans
Separately applied wire grab irons
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox specific for the tunnel motor
Speed recorder attached to appropriate axle per prototype
McHenry operating scale knuckle couplers
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Fully assembled and ready-to-run
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Recommended radius: 22inch
HO SD70 - DCC & Sound - Conrail #2561
Detailed Information
CR FEATURES:
Nathan K5LAR24 horn
CR-specific antennas and conduits on cab and long hood
Air Conditioner
Small front plow
-Dual- fuel sight glasses
Late fuel tank
Spare kuckle brackets on rear pilot
Spare knuckle basket on walkway
Cab vent
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO MLW M420 - DCC & Sound - Providence & Worcester (90s Scheme) #2002
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO2/HO3 Roller Cover Replacement (16pk)
VIA Rail HEP2 Coach Scheme (1996 to Present)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
Colored Weathering Powder - Medium Rust (1oz)
There are several basic methods and approaches to using these powders and we are sure you will probably develop a few of your own! These powders are intended to make rolling stock, buildings, and detail pieces look old, dirty, dusty, rusty, faded, and generally the worse for wear after being exposed to the elements of weather, travel, pollution, and mechanical wear and tear.
HO RTR 48Ft Husky Stack Wellcar - GBRX #2477
Detailed Information
MODEL FEATURES - 48Ft HUSKY STACK WELL CAR:
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
48Ft well cabable of carrying 20Ft - 48Ft containers on the bottom and up to 53Ft containers on top
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
HO GP38-2 - DCC & Sound - Southern Pacific #4864
Detailed Information
SP FEATURES:
Ex LN/SBD
Mid-Phase body
Blomberg M trucks
Firecracker antenna
Nathan P3 horn
HELM leasing pant scheme
3200 gallon fuel tank
Nose headlight
GP38-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
N Scale 36ft Old Time Stock Car - CN #151172
MODEL FEATURES:
- Era: 1890s-1910s+
- Separately applied roof walk
- Molded truss rods with turnbuckles
- Highly-detailed, injection molded body
- Screw mounted trucks for accurate tracking
- Truck mounted magnetically operated knuckle couplers
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Fully assembled and ready-to-run
HO 89ft Thrall Bi-Level Auto Carrier - CSX #150672
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
HO Rail-to-Road Aggregate Transfer - Kit
Product Information
Wherever sand is offloaded, you will find facilities like the prototype for the Cornerstone Rail-to-Road Aggregate Transfer. One of the newest industries along the rails involves some of the oldest material on earth - sand! While its been used for centuries to make building materials, glass and metal castings, you will also find it in paint, fertilizer and plastics. Recently, fracturing sand (or frac sand) has become a hot commodity, used to break rock and improve the flow at new oil and gas fields. But you cant use just any kind of sand for any kind of product, which means its got to be hauled long distances from producer to end user - a big job tailor-made for todays railroads! Rail-to-Road Aggregate Transfers like this kit can be found at a wide range of industries, where they handle road salt, fertilizer and other granular materials. This complete, easy-to-build kit features twin storage silos with pull-through loading for trucks, main office and guard shack, plus printed company and safety signs.
Perfect for modeling a modern transfer facility
Prototypes handle sand, road salt, fertilizer and other granular materials
Railcar unloading pit with conveyor
Twin storage silos with pull-through loading for trucks
Main office and guard shack
Printed company and safety signs
Molded in 5 colors and clear plastic
As shown the kit measures: 14-1/2 x 9-5/8 x 11inch (36.8 x 24.4 x 27.9cm)
HO GE ES44AC - DCC & Sound - Canadian Pacific #8767
ETA: June 2023
Detailed Information
CP FEATURES:
No engine compartment side grab irons
Raised radiator grills
Raised heat exchanger
Canadian Pacific placed eight orders for ES44AC locomotives spanning a decade of production. Early production units featured a distinct cab and nose profile as well as radiator, intake, and hood door variations. These features changed in later productions. The CP units in this offering represents features from the mid- production. While the cab, nose, and radiator intakes are the same as early units, the long hood doors and other features have evolved into what is found on late production units. Athearn has created new tooling to accurately produce these particular units.
ROAD NUMBER SPECIFIC FEATURES:
#8767
Standard Canadian Pacific paint scheme
PTC antennas
raised radiator screen
ES44 SERIES LOCOMOTIVE FEATURES:
Illuminated ditch lights
Tinted cab windows
Large antenna dome
GPS dome
Hand brake panel grille
Nathan K5HL horn
5000-gallon fuel tank
Low or high front headlight per prototype
See through dynamic brake intakes
Low or high front headlight per prototype
See through dynamic brake intakes
Short auxiliary cab rear left-side doors
Right side forward electrical cabinet with X-Panel
Engine compartment side grab irons (Non-CP Units only)
No engine compartment side grab irons (CP Units only)
Flush radiator compartment doors
Flush heat exchanger housing and top radiator grilles (Non-CP Units only)
Raised heat exchanger housing and top radiator grilles (CP Units only)
Dynamic brake exhaust vents spaced per prototype
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO, N, TT - LED Lighting Strip w/DCC Decoder and Red Marker Lights - Warm White
The LokSound by ESU LED Interior Lighting Strips are perfect for lighting HO and N Scale passenger car interiors operating on DCC layouts. Theyre designed for use only on track power (electrical wipers and accessories available separately). Offered with warm white (397-50708) or yellow (397-50709) LEDs they allow you to match your lighting color to your modeling era. The strips include a small potentiometer so you can adjust the brightness. For shorter cars or cabooses the strips can be cut. The red marker LEDs are on wire leads for easy placement where needed.
The integral ESU decoder supports both Motorola(R) and DCC, and also works on DC analogue layouts. The operating mode is detected automatically. In addition to the basic maximum brightness adjusted with the control knob on the lighting strip, brightness may be further adjusted by means of the software. Various prototypical lighting effects such as soft dimming, fluorescent lamp effect, faulty fluorescent lamp, battery powered lighting and many others provide realistic results. The 11 LEDs are wired in several groups, which can be switched separately. Function mapping allows you to assign the LEDs to the function button of your choice. Two additional outputs may be used for the red end-of-train lights or for directional lighting in a cab control car. All effects can also be programmed once the lighting strip has been installed and the values of your DCC LED Interior Lighting Strips can be read on a programming track.
HO 100-Ton Open Hopper - Penn Central #480624
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
Bob Smith Industries 119 Insta-Flex Clear Rubber-Toughened CA Glue 10z
Insta-Flex+ clear rubber toughened has similar qualities to our black IC-2000 but can be used in applications where you do not want the adhesive to be seen. The carbon component of IC-2000 that gives the CA its black color also contributes to its unsurpassed strength. Since INSTA-FLEX+ has this carbon removed, its strength is a little less than IC-2000 but still superior to standard CA's. When esthetics are important and a flexible bond is required, INSTA-FLEX+ is your best choice. It forms superior bonds to soft urethane and vinyl plastics. Both INSTA-FLEX and INSTA-FLEX+ work well when bonding R/C car tires. When a joint has a larger than normal gap, flexible CA's provide superior shock resistent bonds.
8 Packages
Used on Boxcars, Flatcars, Auto Racks, Cabooses & More 1970s to Present
Simulates End-of-Car Cushioning Devices that Provide Extra Protection for Fragile Loads
Realistic Appearance
Installs Easily on Most HO Models
Parts to Convert 4 Cars (2 Pockets Each)
Use with Proto MAX & Most Popular Couplers (sold separately)
N Scale Flexi Flo Hopper (Early) - New York Central (NYC As Delivered) #885823
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Circle Keystone w/ Coal Slogan) #256661
1941+
Full slogan reads -Coal Goes to War-.
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO GMD SD40-2W - DC/DCC Ready - CNNA (Map w/ Web Address) #5339
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
HO EMD GP40R - DCC & Sound - Illinois Central #3114
Mid 90s
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO Alco RS-3 - DCC & Sound - Chesapeake & Ohio as delivered - #5600
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. DCC/Sound version features LokSound V5 decoder.
Dual-Color LED Fascia Turnout Controller
plus one cable of 942-113 - Plug - Socket extension cable - 48 inches Long
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
See the entire system!
The Walthers Layout Control System Dual Color LED Fascia Turnout Controller features:
Can be installed in left or right hand orientation
Fits 1/8in or 1/4in (0.3 or 0.6cm) panel material - include templates for installation with 1in (2.54cm) spacing between parallel tracks
Green/yellow LED indicator - adjustable display to match Switch Machine settings
Single pushbutton operation
Complete instructions with mounting template - use with Control System Turnout Drill Set (#942-140, sold separately)
Connecting cable included - easily expanded with Extension Cable (#942-113, sold separately)
HO AutoFlood III RD Coal Hopper - UP/CMO #504374
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Bi-Level Auto Racks - KCS - Dual Logo - TTGX Flat Car #942845
All are Ready-to-Run.
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene-
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage.
HO SD60M Tri-Clops - DCC Ready - Canadian Pacific #6262
Detailed Information
CP FEATURES:
Full CP repaints (ex-SOO)
Front and rear illuminated number boards
Front and rear ditch lights
Winterization hatch
Fresh repainted appearance
By the 2000s, the 5 SOO SD60Ms slowly started to receive full CP repaints. They retained their rear number boards, but also gained rear ditch lights. Being a rarity, they have become a CP railfan favorite to catch and photograph.
ROAD NUMBER SPECIFIC FEATURES:
#6259
Ex-SOO #6059
large front plow
firecracker antenna
high nose door window
#6262
Ex-SOO #6062
large front plow
firecracker antenna
low nose door window
roof beacon (effect in DCC)
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
EMD HTC trucks with animated bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Accurately painted and printed paint schemes
Packaging securely holds for the model for safe storage
Minimum radius: 18inch Recommended radius 22inch
N 33,900 Gallon - LPG Tank - Procor #2 (3-Pack)
Multiple road numbers, unique numbers between singles and 3-packs
Three different body phases: early, flat panel, and late
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and brake wheel
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
Printed placards, where appropriate
Screw-mounted 100-ton roller bearing trucks
Machined metal wheels with RP25 contours
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Weighted for optimum performance
Operates on all popular brands of track
Minimum radius: 9 3/4 inch - Recommended radius: 11inch
UPGRADED FEATURES:
McHenry double-shelf couplers
Bent wire uncoupling levers
Rubber train line hoses
Snapper Switch Machine Power Supply
Solid state, provides positive power to dual-coil switch machines. Protects from burnout due to stuck pushbuttons, short circuits, etc. Operates off accessory terminals of power pack or transformer up to 25V. 24V input can activate 5 to 10 coils simultaneously if connected to same control. Instant recycle time. Includes a section of Printed Circuit Mounting Track (PCMT).
Code 83 Snap Track - 6 Inches Straight - 4 pcs in blister package
Brown Tie - 6 inches per section
X-2 Mini Acrylic - White - 10mL Bottle
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or airbrushing. These paints can be used on styrene resins, Styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.
When airbrushing be certain to use any of the following Tamiya thinners: Items-81020, 81030, 81040, 81520, 87077.
Tamiya bottle paint label meanings and quick tips:
- X appointed colors have a glossy finish while XF designated colors are flat finish.
- The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
- Items 81521 and 81021 (Tamiya X-21 Flat Base) can be used as a flattening agent on Tamiya Gloss bottle paints. Simply add any X-gloss color then add flat base. Mixing ratio: 1:1
- The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
- For better paint brushing results use Tamiya Paint Retarder (item 87114) for a smoother brushstroke free finish.
HO Scale H1a Hudson Steam - DCC & Sound - Canadian Pacific (Beaver Shield) #2809
-Late walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO AutoScenes - Suds & Shine
The youngsters are not missing a spot while washing and shining this coupe for a spin down the street.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
GMD SD40-2f - DCC Ready - CP Rail (Round Porthole, White Stripe) #9004
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
Figurines - Ordinary People (6)
HO Heavy-Duty Off-Road Dump Truck - Orange
HO TM High-Cube Container - DSEU, Set #2
Contains Numbers: 70459, 70899, 70385, 70150
MASTER MODEL FEATURES:
Prototypical paint schemes
Simulated forklift pockets
Detailed chain securement
Fire port on one side
N Scale GATC 2600 Airslide Hopper - GACX #42500
MODEL FEATURES:
- Detailed underbody including outlet piping
- Rectangular or oval shaker brackets
- Gravity or gravity-pneumatic outlets
- Machined metal wheels
- Factory installed wire grab irons and brake piping
- Separately applied round roof hatches and brake wheel
- Roller bearing or Bettendorf trucks
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed
- Highly detailed, injection molded body
- Weighted for trouble-free operation
- Body mounted McHenry operating scale knuckle couplers
- Clear plastic jewel box for convenient storage
- Operates on all popular brands of track
- Minimum radius: 9-3/4 inches
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
HO Peterbilt 579 Sleeper Cab Tractor - 53ft Dry Van Trailer - U.S. Xpress
HO 40Ft Hi-Cube Dry Containers - Mediterranean Shipping Co (MSC Yellow) (3pk)
3 pack road numbers include : MEDU 800650/800668/800828
Body: Type B
Door: Type A
Latch: Type E
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
HO AutoFlood III RD Coal Hopper - PGNX #1162
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - Conrail
#53870
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO GP50 - DCC & Sound - Chicago & North Western #5091
Detailed Information
CNW FEATURES:
Phase I Body
Nose-mounted -Gong- Bell
Winerization Hatch
Small EMD plow
Leslie 3-chime horn
Sinclair antenna
Western Cullen style beacon (Operational in DCC)
Originally purchased for fast TOFC freights, these units were used in many different applications before being absorbed into the UP merger.
GP50 LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Walkway tread
Lift rings
Sander lines
Windshield wipers
McHenry scale knuckle couplers - Kadee compatible
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO Greenville 86Ft Double Plug Door Box Car - Canadian National (Delivery 10-1978) #795125
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Canadian National (CN) -Delivery 10-1978- is our first Greenville 86Ft auto parts offering in Canadian National. The CN rostered a few orders of Greenville cars, but this order for 80 cars in 1978 was the largest. The 1978 cars have body-mounted brake gear and End-of-Car Cushioning components, along with that signature 5-grab iron body that makes them stand out from any other style of 86Ft Greenville box car. Some of these cars have lasted in their original CNA brown delivery scheme for a long time - we can verify an example to at least 2016! We know this scheme is a big deal - and we thank our CN fans for their patience. We wanted to release it with the correct body grab iron details.
HO F30D 50Ft TOFC Flat Car w/ Trailer - Pennsylvania PRR (Delivery) #475303
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
HO Loudspeaker 16mm x 25mm (.710inch X 1.065inch) - Retangular, 4 Ohms with sound chamber
1-1/16inch X 11/16inch
HO EMD SW9 - DCC & Sound - Generic Industrial Yellow - Unlettered
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX (6 pkg) #2
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
00044
00056
00064
00066
00071
00078
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
1:87 Prevost X3-45 Coach: Greyhound Go Further
FEATURES:
-Diecast metal.
-Pad-printed graphics.
-Very limited edition!
HO Alco FA-1 - DCC & Sound - Erie #728
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
N Scale ACF 50Ft 6In Boxcar - Pan Am #32018
FEATURES:
Prototypical non-terminating corrugated ends
Diagonal paneled roof
Single 10-foot YSD design sliding door (non-operating)
Detailed cross-member attachment rivets on the side sills
Weighted, detailed underframes
True scale dimensions with acccurate details
Equipped with AccuMate knuckle couplers
HO 50ft PC&F, 8ft & 6ft Boxcar - SP/GWS #694302
MODEL FEATURES:
- Separate wireform grab irons, etched metal coupler platforms, and/or etched metal roofwalk
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- Weighted for optimum performance
- Separately applied wire grab irons where applicable
- Trucks with animated rotating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Body-mounted, McHenry scale double-shelf knuckle couplers
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
- Minimum radius: 18 inches
- Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
RTR 30,000 Gallon Ethanol Tank Car - Archer Daniels Midland - (3 pack) #3
Detailed Information
31174, 31208, 31244
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
PRR X31A Double-Door Boxcar: Shadow Keystone, Early - Single Car #69215
Detail Variations:
As operated between 1954 ad 1967.
6-pack includes the following numbers:
#69012
#69081
#69138
#69215
#69324
#69459
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
HO Diesel Locomotive Ditch Lights w/Stands (4pk)
Styrene, non-working, and could be modified to use LEDs.
HO 66ft Bulkhead Flatcar - CP Rail #317502
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
Cab Window Shades for Southern & Norfolk Southern Diesels
HO Amtrak NPCU Cabbage - DC/DCC/Sound - Amtrak (Phase V) #90229
The Rapido Trains HO scale Amtrak NPCU -Cabbage- features:
Fully powered, available in silent DC or DC/DCC/Sound
DC models are DCC-ready with a 21-pin plug
Accurate enlarged marker lights, supplementary air reservoirs and K5LA horn
Operating, flashing ditch lights
Operating strobe lights and marker lights
User-controlled operating number boards
Etched-metal radiator grilles and windshield wipers
Separate handrails and grab irons installed at the factory
Rapidos proven 5-pole, skew-wound motor and silky-smooth drive system
Metal, magnetic Macdonald-Cartier Couplers mounted at the correct height
Second release paint schemes include:
Amtrak Phase III
Amtrak Phase V
Amtrak Phase V -Downeaster-
Amtrak -Salutes Our Veterans-
HO Scale NSC 73Ft Centerbeam Flatcar - BC Rail #730403
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
All Scale - Woodland Classics - Ready Made Trees - Cactus Plants pkg(13)
1/2 to 2-1/2inch 1.3 to 6.4cm
Built & Ready Landmark Structures - Records and Recording
Woodland Scenics HO Scale Records & Recruiting is based on an older brick storefront building. This fully assembled building is hand-painted and authentically weathered. It features exterior details like crates and barrels, as well as eye-catching printed interiors and decals. Blinds cover apartment windows above the bustling businesses. The structure also comes with pre-installed LED lighting made for use with the Just Plug(R) Lighting System. Records & Recruiting is part of the entire line of Woodland Scenics HO Scale Built-&-Ready Landmark Structures.
0.090 inch Thick Aluminum Flat Sheet - 6x12inch
Aluminum Flat Sheet 6inch Wide x 12inch Long (1 pc)
15.2 x 30cm
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - Agawa Canyon #106
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
HO Row Boat (4pk)
FEATURES:
- Must-have for harbor, lakeshore or campground scenes
- Perfect for use with Small Shoreline Pier kit (#949-4156, sold separately)
- Includes four boats, each finished in white and tan
HO 60ft Gunderson Boxcar - WRWK #618
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Fully assembled and ready-to-run
- Razor sharp painting and printing
- Weighted for optimum performance
- 36 inch metal wheels with RP25 contours
- Minimum radius: 18 inches
HO 55Ft Evans 4780 Covered Hopper - ADM (UELX) #10009
Product Information
Expand grain traffic along your HO railroad with a fleet of WalthersProto 55ft Evans 4780 Covered Hoppers! Introduced in 1977 and still going strong today, they can be found handling all types of grains and dried distillers grains used for animal feed. Fully assembled and ready for service, features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint and lettering
Ultra-smooth rolling 36inch RP-25 turned wheelsets
Proto MAX(TM) metal knuckle couplers
HO 1988 G43B Coil Svc. Gondola w/ Coil Racks (Coils Not Included) - Conrail (CR) #601833
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -1988 G43B Coil Svc.- With Coil Racks ? Coils Not Included in the now-classic Conrail red paint. This series represents the former PC-painted G43B series. Conrail maintained the lettering locations that PC did, painting the Conrail reporting marks, road number, and Conrail can opener logo in the same locations PC had stenciled them. The G43B prototype features cushion draft gear, giving the model a distinctive look compared to the other G43 classes. The top chord of the car has a -COIL STEEL LOADING ONLY- stencil to remind customers and railroad officers that the car is equipped with coil racks. Our model has coil racks too, and we sell beautifully executed steel coils for this car separately. We recommend a load of four coils if you want to replicate most prototype loading patterns ? for the size of coil we created. Yes, we did the math. These Conrail coil service gondolas are offered in 12 road numbers and feature details appropriate for these 1969-built cars.
Gunderson Multi-Max Auto Rack - CSX
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140025
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO G2.0 SD60M Tri-Clops - DCC & Sound - Ex-BN CIT Group (CBFX) #6028
Primed for Grime Locomotive
CBFX FEATURES:
Ex-BN, unique patches/paint per road number
Small EMD plow, faded paint effect
Front deck mounted ditch lights
Cab door with window
After BNSF sold off some of their aging fleet of SD60Ms, a small batch were purchased by CIT group as leased power. They can be found on many different railroads as extra power.
ROAD NUMBER SPECIFIC FEATURES:
#6025
Black reporting marks on cab
small CIT logo on body
faded BN logo on nose
yellow frame stripes.
#6028 `
White reporting marks on cab
large CIT logo on body
painted out BN nose logo
yellow frame stripes.
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately ?painted and ?printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Warranty service available
Minimum radius: 18inch Recommended radius 22inch
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
Animated roller bearing caps
SOUND-EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO EMD GP39-2 - DCC & Sound - CSX/YN3 #4300
Detailed Information
CSX FEATURES:
Ex-RDG
Early phase 1 body
Illuminated number boards
Front and rear ditch lights
5-chime horn
RV style roof mounted A/C
Nose toilet hatch
Correct CSX artwork and colors
Chessie/CSX -mail slot- style battery box doors
CSX purchased 20 ex-Reading/D&H GP39-2s in the late 1980s. They operate alongside CSXs other EMD GPs providing power for locals, haulers, and road switching assignments. Most of the fleet can still be seen operating today.
ROAD NUMBER SPECIFIC FEATURES:
#4300
Front and rear CSX style ditch lights (alternate flash in DCC mode)
small front EMD plow
mixed Hyatt and Timkin bearing Blomberg B trucks with outer brake shoes removed
#4307
Front and rear CSX style ditch lights (alternate flash in DCC mode)
small front EMD plow
mixed Hyatt and Timkin bearing Blomberg B trucks with outer brake shoes still installed
#4311
Front tall EMD style and rear CSX style ditch lights (alternate flash in DCC mode)
small front EMD plow
mixed Hyatt and Timkin bearing Blomberg B trucks with outer brake shoes removed
GP39-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
60ft Pullman-Standard Flatcar - Ready to Run -- TTX VTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Scale NSC 73Ft Centerbeam Flatcar - BC Rail #730420
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
Plastruct 91861 Brown Tile Paper Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
Vintage Gulf
Peterbilt 350 tractor with 32ft tanker trailer
Highly detailed
Free rolling wheels
HO 50ft Evans Double-Door Plug Boxcar - Quinault Pacific/USLX #10469
MODEL FEATURES
-Fully assembled and ready for your layout
-Separately applied end ladders, brake wheel and underbody details
-Weighted for optimum performance
-Machined RP25 profile 33in metal wheels
-McHenry scale knuckle spring couplers installed
HO - 4750 Cubic Foot Rib-Sided - 3-Bay Covered Hopper - Goodseed & Grain #478962
HO Scenic Accent Figures - Senior Citizens with Bench (6 pkg)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism.
HO 1958 Cu Ft 2 Bay Covered Hopper - Open sides
Missouri Pacific #2174
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
Tombstones 20 pcs
Set includes a twenty-piece assortment of square, rounded, cross and obelisk tombstones
RTR 67Ft Trinity 6351 4-Bay Covered Hopper - ADM
Product Information
Expand grain traffic in minutes with layout-ready WalthersProto(R) 67Ft Trinity 6351 Four-Bay Covered Hoppers! Introduced in the early 2000s, these large-capacity cars are industry favorites for handling dired distillers grains (DDG), malt and many other food products. Other features of these HO Scale replicas include:
Limited edition - one time run of these roadnumbers!
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct 36Inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
AK Interactive Streaking Grime
Evergreen Scale Models 101 Opaque White Polystyrene Strip 0.010x0.030in (10pcs pkg)
14 inches long
40Ft Corrugated Container Uniglory 2 pk
8159858(1) and 816309(3)
60 ft NSC 5150 3-bay Covered Hopper - Illinois Cereal Mills Cargill ICMX #1032
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. They have worn a wide range of colorful paint and lettering schemes over the years, 59ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59ft Cylindrical Hoppers feature:
Limited Edition - one time run of these roadnumbers!
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36In turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 53ft Stoughton Containers - EMP, Set #2 (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Separately applied door closure rods
- Each container individually numbered
- Razor sharp printing and painting
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Weyerhaeuser #1106
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO EMD GP7 - DCC & Sound - Erie Lackawanna EL #1207
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
EL FEATURES:
Re-Lettered Erie units; post 1960
Dynamic or non-dynamic, depending on road number
Two single-chime horns
-Canvas- sunshades
Long-hood-forward operation
Curved spark arrestors
In 1960, the Delaware, Lackawanna and Western Railroad merged with the Erie Railroad to form Erie-Lackawanna. The Erie had owned a sizeable number of EMD GP7s, which were all less than 10 years old at the time of the merger and still giving good service. Rather than spend precious money to repaint these units immediately, the EL decided to retain the Erie paint scheme, but omitted the -wings- on the ends of the units and added their own logos. The units continued in this guise until the mid-to-late 1960s when most were repainted in the grey-and-maroon EL scheme.
ROAD NUMBER SPECIFIC FEATURES:
#1207 Dynamic brakes
#1214 Dynamic brakes
#1221 Non-dynamic brakes
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Indiana Harbor Belt #819006
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
VW Panel Van Red/White 1:43 Scale
HO EMD FT A+B Set - DC/Silent - AT&SF (Passenger Scheme) #158L + 158A
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO - RTR FMC 60Ft DD/SS Hi-Cube Box - Conrail/NYC #221774
Detailed Information
MODEL FEATURES:
Double 8Ft Youngstown doors
Separately applied grab irons, end ladders, and brake wheel
Photo-etched coupler cross-over platform
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Weighted for trouble free operation
Newly tooled -70 or -100 ton roller bearing trucks with 33inch or 36inch wheels per prototype
Machined metal wheels and RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18inch
HO Master MP-36 - DCC/Sound - Metrolink #890
Features:
- Golden-white LEDs
- Realistic die-cast underframe
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Realistic lighting effects including ditch lights and in-cab light
- Metal knuckle couplers
- Detailed cab interior
- Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
- Coupler cut levers
- Multiple unit hoses and trainline hoses
- Recommended 22 inch radius with Atlas passenger cars
DCC Ready Units:
- Equipped with a speaker for easy conversion to sound with the addition of a decoder.
DCC ESU LokSound Functionality Features:
- Over 20 sound effects are available including Head-end Power (HEP), engine start-up and shutdown, prime mover sounds through all eight
notches, bell, air horn, air compressor, dynamic brakes and more.
- There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
Kit (blue) pkg(3)
Spray Can - Dull Red (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO GMD SD40-2W - DCC & Sound - CNNA (Map w/ Web Address) #5339
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. DCC with Sound version features LokSound V5 decoder.
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
OVR Exclusive - HO Bi-Level Auto Rack - CP Rail/TTGX #255897
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO Conrail (CR) G41A Repaint 1976 w/o Hoods PRR Shops G41A Coil Car
CR G41A Repaint 1976 w/oHoods illustrates an early CR repaint. Check out the thinner style CR logos, PC/CR style data stencils, and era appropriate ACI and PC/CR style double COTS. The early CR cars maintained their hoods for protection of the coil shipments. If you want to model the car later in their service lives, do not panic: The hoods are removeable. The interior troughs have all of that loading and identification data, too. The ends feature the original shorter style coupler lift bar brackets and Morton style crossover platforms. The 125-Ton trucks feature rotating Timken caps, 38in wheels and accurate brake beams with truck mounted brake details.
Also, these cars look great loaded with our all-new coil loads sold separately!
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
HO NSC 5304 Boxcar - Canadian National (Delivery w/ Green Door) #557418
The Rapido NSC 5304 cu.ft. CN Combo Door Boxcar features:
Separate grab irons installed at the factory
100-ton Barber S-2 trucks, with metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe
N Scale 50Ft NACC Box - Penguin Ginger Ale #7007
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
HO Conrail (CR) G41A Repaint 1976 w/ Hoods PRR Shops G41A Coil Car
CR G41A Repaint 1976 w/Hoods illustrates an early CR repaint. Check out the thinner style CR logos, PC/CR style data stencils, and era appropriate ACI and PC/CR style double COTS. The early CR cars maintained their hoods for protection of the coil shipments. If you want to model the car later in their service lives, do not panic: The hoods are removeable. The interior troughs have all of that loading and identification data, too. The ends feature the original shorter style coupler lift bar brackets and Morton style crossover platforms. The 125-Ton trucks feature rotating Timken caps, 38in wheels and accurate brake beams with truck mounted brake details.
Also, these cars look great loaded with our all-new coil loads sold separately!
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
HO GP38-2 - DCC Ready - Grand Trunk Western (GTW) #5861
Detailed Information
GTW FEATURES:
Ex-Rock Island
Mid/Late Phase
Large anticlimber
3600 gallon fuel tank
Xenon Strobe
M-3 Horn
Small EMD front plow
Blomberg B trucks
Firecracker antenna
88inch Nose with removed class lights
After the demise of the Rock Island in 1980 many of their locomotives were sold to other railroads. The GTW purchased some of these GP38-2s and painted them into this catchy red and blue scheme. Our models represent the pre-ditch light era.
ROAD NUMBER SPECIFIC FEATURES:
#5853
Large GT logo
Long hood mounted horn
White Xenon beacon (operational with DCC)
All-weather window
#5861
Large GT logo
Long hood mounted horn
White Xenon beacon (operational with DCC)
All-weather window
#5856
OLS with small GT logo
Cab mounted horn
White Xenon beacon (operational with DCC)
All-weather window
GP38-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23074
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Triple Crown #463523
Medium NS
Ready to Run.
Features:
-Crisp details and sharp painting and printing, metal wheels
HO Enterprise 2-Bay Covered Hopper - New York Central (NYC Gothic) #881424
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO 60Ft Gunderson 7550 Double Door Boxcar - TTX #663952
MASTER MODEL FEATURES:
All New Tooling!
Separate ladders, hand brake and door rods
Door stirrup, unique to the 7538
Single or double plug door as per the prototype
Roof with 3 Stanray X-panels and 3 diagonal center panels
Brake arrangement offset to A end of body
Crisp, accurate lettering and paint details
HO 40Ft PS-1 Boxcar - Port Huron & Detroit #1070
Date: BK 7-62
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
HO Code 100 Plastic Insulating Rail Joiners (24/pkg)
Use Atlas HO Scale Plastic Insulating Rail Joiners to join and electrically isolate sections of track. Joiners will work with any brand of Code 100 rail.
HO SD70ACU - DCC & Sound - Canadian Pacific (Military Scheme) #7023
ETA: October 2023
Detailed Information:
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military commemorative paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system. CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in temperate climates. CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and ?printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO SD70ACe - DCC & Sound - Montana Rail Link (MRL) #4308
Overview
MRL FEATURES:
Lit Number Boards
Truck lights
Nose mounted headlight
Early Brake wheel
As-delivered scheme
In 2005, MRL ordered 16 SD70ACes from EMD to help replace the aging fleet of their older EMD power. They were painted at CEECO in Tacoma WA and placed into service shortly after.
SD70ACE SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Hawker-Siddeley Van - Caboose - Canadian National - Late - (Black Steps) - #79291
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
HO MP15DC Gold - DCC & Sound w/ Ditch Lights - Norfolk Southern #2368
Features:
Three different hood styles (angled air filter box, square air filter box, standard hood)
Exhaust stacks: with or without muffler
Long hood sand fill: recessed or extended
Rear sand fill: Three variations of sand boxes behind cab
Pilot: standard or with snow plow
Additional Features:
Separately-applied scale detail parts include: windshield wipers, metal grab irons, coupler cut levers, multiple-unit hoses, snow plow, train line hoses, fine scale handrails, and more!
See through step detail on sill
Etched metal radiator grilles
Painted crew members
Factory-equipped with AccuMate knuckle couplers
Coupler pocket designed to accept AccuMate Proto-couplers
Five-pole skewed armature motor w/ dual flywheels for optimum performance at all speeds
Directional lighting with golden-white LEDs
Atlas Master Series Gold Features:
ESU LokSound decoder, supporting all DCC programming modes.
Flexible mapping of function keys F0 to F31.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor and more.
Peel n Place Tufts - Dark Green Prairie Grass
The Woodland Scenics Peel n Place Tufts allow you to model a variety of grassy plants often found in fields, meadows and pastures. Available in several styles of grasses and flowers, these tufts are ready-made and can be used right out of the package. Simply peel the tufts from the tray and place them where desired. Combine Peel n Place Tufts with other Woodland Scenics scenery materials to enhance your layout.
HO NSC Ballast Hopper - CP Rail (Branchline) #456077
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO Greenville 86ft Double Plug Door Box Car - Erie Lackawanna #92085
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: August 2021
Erie Lackawanna (EL) -Original 1965- represents the first of four Erie Lackawanna orders for Greenville 86ft Double-Door box cars. Delivered in 1965, this group of 100 cars featured Center-of-Car Cushioning with truck mounted brakes. This car includes the large spelled out Erie Lackawanna on the left side of the car, and a large gold -Cushioned Car- and large white Erie Lackawanna diamond logo at the right side of the car. We sweat the little details too – our model is equipped with an accurate Ajax hand brake, Apex crossover platforms and 70T trucks with 33inch wheels and rotating Timken roller bearing caps. Remember those truck mounted brakes mentioned earlier? Yes, our trucks have the correct truck mounted brake beam to match that important detail. Finally, this Erie Lackawanna offering was part of the Fords Chicago Stamping Pool, resulting in an accurate Chicago Heights, Illinois return route stencil. Our EL masterpieces are available in six different numbers. EL Fans rejoice!
Juneco Scale Models CN & CP Diesel and Caboose Radio Antenna (4/pkg)
Pre-painted & Labeled Metal Gas Pumps - Dlx Phillips 66
- Pre-painted and decorated with the logo of the company named.
HO 26Ft Can-Car Dry-Van Trailer - CP Express #7538
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
Metallic Gray Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
O (1:48) Custom Right Turn Staircase (1pc)
Use in interior applications where a closed casing or spiral staircase is desired. Combine with other staircases to achieve any configuration. Precision Injection Molded in Styrene Plastic.
SCALE
O
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
9/64In
HEIGHT IN MM
3.6mm
WIDTH IN INCHES
57/64In
WIDTH IN MM
22.6mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
1
LENGTH IN MM
25mm
Approx. 1/4 inch OD Round Brass Tube (Streamline) 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch (Streamline)
Outside Diameter: 1/8 inch
HO 13,600 Gallon Acid Tank Car - Procor/White (PROX) #16526
ETA: July 2023
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
N Wood Grade Crossing (2/pkg)
Product Information
Realistic looking and ready to place. Injection molded plastic wood planks are notched to fit over rail spikes. Includes pre-cut shims to correspond to proper code. Two crossings in each package.
HO EMD SW9 - DC/ Silent - New York Central (NYC As Delivered) #8928
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO ET44 Tier 4 - DCC & Sound - Kansas City Southern #5014
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO EMD GP7 - DCC & Sound - Precision National PNC #1508
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
PNC FEATURES:
Different wheel bearing styles per prototype
Full skirts
1200-gallon fuel tanks
Sunshades
Cut levers
In the early 1970s Precision National was a one of the first companies that remanufactured diesel locomotives and then leased them out to railroads that needed them to bolster their fleets when they were power short. Their shops were located in Mount Vernon, IL which later on became the home for National Railway Equipment, a company that became a major supplier of leased and rebuilt diesels locomotives. PNC developed a uniform green and yellow paint scheme for their lease fleet that could be seen around the country.
ROAD NUMBER SPECIFIC FEATURES:
#1508 Front nose oscillating signal light (functions in DCC), spark arrestors, non-dynamic brake hatch
#4207 Foot board pilots, Dynamic brakes, Tall MU stands
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO GE 44 Tonner Phase Ic - DC/DCC/Sound - Boston & Maine (Minuteman) #114
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
Fine-Leaf Foliage - Medium Green (75 in3)
Fine-Leaf Foliage is a natural product. Use its fine leaf detail to model exquisite trees, bushes, saplings, shrubs, and hedges. Available in six colors. A tree armature sample is included in each package. To use, strip, cut, or break from branches. Use the debris to detail your layout. Glue to layout with Scenic Glue. Make trees using Tree Armatures, Hob-e-Tac, and Fine-Leaf Foliage.
HO 70-Ton Covered Hopper - Soo Line - #8908
FEATURES:
- Crisp details
- Sharp painting and printing
- Metal wheels
- Knuckle couplers
HO - Nathan K5R25 5-Chime Air Horn - Lost Wax Brass Casting
Metrolink #859
Teal Ribbon Repaint
Model Features:
•Scaled from field measurements & diagrams of a GO F59PH
•End metal handrails with plastic stanchions
•Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
•All-metal etched grilles
•Full cab interior
•Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
•Operating headlights, rear light, and ditch lights
•GO units feature functioning tri-color class lights (white, green and red)
•American units feature functioning red marker lights
•Accurate sounds recorded from a GM 12-710G3A
•DCC/Sound units come equipped with an ESU LokSound decoder
O (1:48) ABS 3Ft-0In STAIR (1pc)
Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision injection molded in Gray ABS Plastic. Ideal for all outdoor or profess model construction where model life is critical.
SCALE
O
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
17/64In
HEIGHT IN MM
6.7mm
WIDTH IN INCHES
7/8In
WIDTH IN MM
22.2mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
1/2In
LENGTH IN MM
300mm
HO RTR ACF 2970 Covered Hopper - Winchester and Western (W&W) #4525
Detailed Information
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons and stirrup steps
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple road numbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
HO Greenville 86ft Double Plug Door Box Car - CB&Q #15040
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Release Date: August 2021
Chicago, Burlington, and Quincy (CB&Q) -Original 1-1969- is our first Greenville 86ft auto parts offering for any of the -Hill Lines.- CB&Q was the only Hill Line railroad to take delivery of auto parts cars, and this release represents the first of CB&Qs two orders of Greenville prototypes. Delivered in 1969 when the BN merger plan called for green car deliveries, these cars had their pre-merger paint scheme, complete with large -Burlington- lettering. For return route stenciling, these cars state -When Empty Return To GTW RR Pontiac MICH- on the side. For additional context for how far and wide these cars traveled, these cars served into Canada. The car side has one and a half inch stenciling stating -This Car Too High To Clear St. Clair Tunnel Port Huron Michigan.- This warning lettering varied from car to car, and we have duplicated this with car-number specific and car-side specific placement of St. Clair tunnel stenciling! The CB&Q cars feature 100-Ton -Low Profile- Barber S-2-C Roller Bearing Trucks, with 36inch wheels, complete with accurate Hyatt rotating caps. These models are ready to operate with four different road numbers!
N scale Chain Link Fence - Kit
Easy-to-assemble N Scale Fences from Woodland Scenics feature modular design and include gates, detailed hinges and planter pins for easy installation. Each fence kit includes parts to build 192 scale feet of fencing. Fences for all kinds of scenes are available as part of the line of Woodland Scenics N Scale scenery details.
EMD SD45 - DCC & Sound - Penn Central #6220
Product Information
Handle fast freight on your HO railroad with the rugged WalthersProto SD45! Introduced in 1966 with a 20-cylinder 645 prime mover cranking out 3600 horsepower, SD45s quickly became the preferred power for expedited freights and piggyback trains, going on to new careers with regionals and shortlines into the 1980s and beyond. Ready for service, features of these WalthersProto replicas include:
NEW - High, short hood versions of Norfolk & Western and Southern Railway units
One time run of these road numbers, order now - limited quantity available!
Prototypes in freight service from 1966 to early 2000s - several preserved today!
Available with LokSound 5 Sound and DCC for DCC and Standard DC layouts
Road-specific details
Superb paint and lettering
Five-pole, skew-wound, high-torque, high-efficiency can motor
Helical gears with 14:1 ratio for smooth, ultra-quiet running
LED constant and directional headlights as appropriate
Easy multiple-unit operation
Heavy die-cast metal underframe
Correct size RP-25 metal wheels
Road-specific details on this model include:
Leslie SL-3 air horn
Sinclair radio antenna
Cab signal equipment box
Flexicoil-C trucks with high-mount brake cylinders
N Scale Curved Track - 6in (15cm) 45-degree (4/pkg)
Note: (Needs 8 Pieces for a Complete Circle)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO Bi-Level Auto Rack - Conrail/TTGX Flat Car #604132
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
1oz 29.6mL
Setting solutions soften decal film, allowing it to stretch over details for the best appearance. Prevents air bubbles and results in an invisible carrier film, reducing silvering. Formulated especially for Micro Scale decals, can be used with most other brands.
Brush over area where decal is to be applied. Special wetting agents cut oils in new paint and strengthen adhesive on decal.
AK Interactive 263 Wash for Wood 35mL
Enamel type wash for modeling
This product allow us bring life to the details of the wood accessories of our vehicles and complements. This wash is specially designed to be applied over the light colors of the wood, or even dark to create deep and enhance the wood.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows. The excess of the wash can be easily removed with a clean brush and White Spirit.
HO GMD SD40-2 - DCC & Sound - Canadian Pacific: B Unit #5769
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
Athearn Genesis - HO ACF 4600 3-Bay Centerflow Hopper - The Rock #800360
Estimated time of arrival: May 2021
Detailed Information
MODEL FEATURES:
Three body styles:
Early- High side ladder & brake wheel, single side stiffener
Mid- Low brake wheel, short side ladders both ends, single side stiffener
Late- As above but with double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble free operation
Genesis 100-ton trucks with 36Inch machined metal wheels and animated spinning roller bearing caps
ROCK FEATURES:
Era: 1978+
The Rock: As-Delivered. Late style body with stiffener ribs and low brake wheel.
PROTOTYPE AND BACKGROUND INFO:
The 3-bay CenterFlow covered hopper first entered service in the mid-1960s, built by American Car and Foundry. The cars handle loads such as grain, corn and similar bulk commodities. The Centerflow design relies on the cars rounded body to provide structural strength - eliminating the traditional center sill, and making gravity unloading easier. Our 3-bay car represents the common 4600 cu.ft. capacity version. The railroads looking to replace their aging 40Ft box cars in grain service needed a modern hopper design - one that could operate within the tighter Plate B clearances for light branchline and industrial service. ACFs design won them many contracts from a plethora of railroads. One can find these cars still in revenue service today in grain trains and other similar service.
Specifications
PROTOTYPE MANUFACTURER: American Car & Foundry
TRUCK STYLE: Genesis 100-ton
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1970s+
Minimum Age Recommendation: 14 years
Is Assembly Required: No
WalthersMainline HO EMD SD70ACe-DCC ready Union Pacific
Bring the power of todays railroading to your HO Scale layout with the WalthersMainline EMD SD70ACe diesels. Starting with the SD70 introduced in 1992, the prototype underwent a number of upgrades and in 2005 the more powerful SD70ACe was unveiled with AC traction motors. Today, these colorful locos can be found on the rosters of lines big and small. Nicely detailed and affordably priced, additional features include:
Limited edition - one time run of these road numbers!
One of the backbones of contemporary loco fleets
Prototypes in service 2005 to the present
Easily handles 18in radius curves (22in or larger recommended)
LED Lighting includes:
High or low headlight per prototype
Working front ditch lights
Constant and directional lights
Fully assembled
21-Pin DCC plug
Same powerful drive as WalthersProto(R) locos featuring:
5-pole skew-wound motor
14:1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Dual machined brass flywheels
Heavy die cast metal chassis
Molded drill starter points for grab irons - easily added with SD70ACe Diesel Detail Kit (910-251, sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Make your WalthersMainline SD70ACe more realistic with these accessories, available separately:
SD70ACe Detail Kit
Walthers Double Ended Pin Vise
Walthers Drill Bits
SD70MAC Diesel, w/ DCC & Sound - TFM #1649
Era: 2012-2018+
EMD SD70MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
First time ever with front and rear Rubber MU hoses, Trainline hoses, Cut levers, and rear Spare
TFM FEATURES:
As delivered, KCS of Mexico. Unique nose stripes and TFM flag.
LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PROTOTYPE SPECIFIC INFORMATION
During the early-1990s, EMD teamed-up with German engineering company Siemens to produce a freight locomotive that was capable of providing AC-traction drive currents, and thus providing a high-horsepower rating and lower fuel consumption for railroads which had an ever-increasing demand for saving fuel consumption by using a lesser amount of units to haul most of their trains.
The EMD SD70MAC was first introduced in early 1993, and began production later-on during the same year after numerous tests and improvements were made. Since then, the EMD SD70MAC has been a staple of heavy freight lines across the country.
Atlas 63 HO Code 100 Manual Switch Machine Right
For Code 100 Snap Switches. With a manual switch machine attached to your switch, you can flip a lever by hand and change the direction of the rail.
HO Value Line RTR - 13 Panel Coalporter - NYC (Conrail Quality) #505422
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52R class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) #743816
1935+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Gunderson Multi-Max Auto Rack - BNSF
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
HO Scenics Accents - Dock Workers (6pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail!
Includes six dock workers, two crates, and one pallet. One dock worker is holding up his hand to signify stopping an operation. One is opening a crate, one is dragging a pallet, two are carrying a crate and another is looking up, surveying a project.
N Scale High Speed Limit Signs (18pk)
HO Code 83 Remote Snap-Switch - Right Turnout
Brown ties, nickel silver rail.
18inch Radius Snap-Switches
Designed for above or under-table switch machine
Plastic Frog (cannot be powered)
Cut-outs for rail joiners
These switches have a remote control switch machine attached so you can wire the switch to be -thrown- (changing the direction of the rail), from your control panel, rather than from the switch itself. Comes with a 1/3 18inch radius section, making the curved leg equal to an 18inch radius section. To add a passing track and siding, simply replace a 9inch straight section. When replacing an 18inch radius curved section with an Atlas Snap-Switch, add a 1 1/2inch straight section to the opposite side.
All Atlas code 83 has brown ties and nickel silver rail.
HO GATC 2600 Airslide Hopper - Rock Island #8522
MODEL FEATURES:
- Three different body styles
- Rectangular or oval shaker brackets
- See-through metal roof walk
- Highly detailed, injection molded body
- Fully-assembled and ready-to-run out of the box
- Detailed underbody including outlet piping
- Gravity or gravity-pneumatic outlets
- Roller bearing or Bettendorf trucks
- Factory installed wire grab irons and brake piping
- Coupler cut levers and train air lines
- Machined metal wheels
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Operates on all popular brands of track
- Minimum radius: 18 inch
HO 85Ft Budd Dome Coach - Ready to Run - Amtrak Phase I
Product Information
Provide passengers spectacular views of the scenery on your classic streamliner quickly and easily with this WalthersMainline HO Scale 85Ft Budd Dome-Coach! Nicely detailed, affordably priced and built tough for years of dependable service, this car is based on fluted-side cars used my many North American railroads. 85Ft Budd Dome-Coach are perfect for use with other WalthersMainline HO Scale streamlined passenger cars.
Model passenger service in minutes at WalthersMainline prices!
Based on streamlined cars used by many roads
Eight authentic car types
Operates on 18inch or larger radius curves
Correct prototype 85Ft length
Tinted window glazing
Fully assembled, ready for fun on your railroad
Rugged construction for years of service
Detailed body
Full interior
Correct 36inch turned metal RP-25 wheelsets
Proto MAX(TM) metal knuckle couplers
LED interior lights available separately
Molded drill starter points for add-on wire grab irons (sold separately)
Officially licensed by Amtrak Amtrak is a registered service mark of the National Railroad Passenger Corporation
HO ALCo RS-3 - DCC/Sound - Boston & Maine #1506
(without lighting box on the deck)
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO RTR Trinity Rail 3281 Cu Ft 2-Bay Covered Hopper - Excel Railcar ERCX #7026
(gray, red; Yellow Conspicuity Marks)
Product Information
This HO Scale TrinityRail 3281 Cu.Ft. 2-Bay Covered Hopper is based on a common late-1990s and later prototype commonly used to haul frac sand, roofing granules and similar materials. With the boom in frack sand traffic it isnt uncommon to see these prototypes used in unit trains. Prototype cars measure 41ft-11inch long, and the cars are equipped with three or five round loading hatches and a pair of gravity outlets for commodity off-loading. Compared with earlier 2-bay covered hoppers, these cars are distinctive. Notably, an overhanging arched roof, heavy top reinforcement stiffener, and folded jack pads at the bolster are spotting features for the Trinity 3281. This design has proven to be popular with shippers and railroads alike. The HO scale freight car features an injection-molded body, applied wire grab irons, photo-etched walkways and working shelf-type knuckle couplers without trip pins for scale appearance. Other details include roadnumbers printed on the truck sideframes, coupler cut levers, NMRA compliant car weight, trucks with spinning bearing caps, multiple roadnumbers per scheme and graffiti on select roadnumbers.
USB Interface
For computer programming and/or operation of Power Cab equipped layouts.
Hardware requirements: Requires the NCE Power Cab, a USB cable, and computer.
N Scale Single Track Truss Bridge - 9-3/4inch(248mm) - Gray
Comes completely assembled. Measures 9-3/4 x 1-1/4inch (24.3 x 3.1cm).
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated.
Theres no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and youre ready to go.
HO FMC 5077 SSD Boxcar - WRWK/GATX #1411
MASTER MODEL FEATURES:
- Single or Double Sliding Door where appropriate
- Multiple body styles
- Metal knuckle couplers
- Plate B Box Car
- X-Panel Roof
HO SD70M - DCC & Sound - PRLX ex CSX #4695
Detailed Information
CSX & PRLX FEATURES:
CSX units are former EMD demonstrators. In a roster increasingly dominated by GE, a group of these venerable units have been sold to Progress rail, returning the units to lease service once again.
Early Cab with nose window
Customer-installed GPS dome included in box
K5LA horn
Spare knuckles on rear pilot
Appropriately-colored MU cables
Early 5000 gallon fuel tank
Large or small snowplow per prototype
Illuminated front ditch lights; flash when horn is activated on DCC and Sound Version
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Southern (6pkg)
6-Pack includes the following numbers, all individually packaged: #10119, #10168, #10990, #11030, #11048, #11358
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO USRA Single-Sheathed Boxcar: PRR (Youngstown door)
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Greenville 86Ft Quad Plug Door Box Car - Delivery 12-1969 - GTW #305774
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Grand Trunk Western (GTW) -Delivery 12-1969- is notable for several reasons. First, the classy GTW scheme looks especially good on this car (in our humble opinion) with the large GT logo centered between the paired doors. Second, GTW was the largest purchaser of Greenvilles quad door box car design, making them highly statistically relevant for modelers in the US and Canada. Painted in the characteristic GTW blue color with white stenciling, these cars are sure to be crowd pleasers and were seen widely. The GTW cars feature their as-built 1969 appearance that includes Gypsum crossover platforms, Ajax brake hand brake housing, Greenville-applied tack board locations and that beautiful End-of-Car Cushioning underframe setup. 70-Ton Trucks with 33inch wheels and rotating -Benco-6- roller bearing caps finish off this dominant offering. Our GTW masterpieces are available in eight different numbers.
HO 37ft General American Meat Reefer - Wilson Road #9452
Rapidos 37ft Meat Reefers Feature:
- Complete underbody with all piping
- Super-detailed Barber S-1 trucks
- (Insulated turned blackened metal wheelsets)
- Accurate roof hatches and hardware
- See-through brake platforms
- Separate grabs, ladders and roofwalk
- Accurate paint schemes
- Multiple car numbers per scheme
- Factory-installed Macdonald-Cartier couplers
- Available in singles or multi-packs.
SL10 - Code 100 HO North American-Style Rail Joiners (24/pkg)
Description:
Nickel silver metal conducting rail joiners.
Use with HO/OO, O, and O-16.5 scales and Code 100 rail.
24 metal rail joiners per pack.
GP40-2 - DCC & Sound - DT&I #408
Detailed Information
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; were excited to include new features often requested, to the GP40-2 and upcoming Genesis models.
DT&I FEATURES:
Chickenwire radiator grills
Front & rear drop steps & footboards
Gong bell on nose
Pilot grabs
Illuminated strobe (effect on DCC+sound version)
No dynamic brakes
2600 gallon fuel tank
Firecracker antenna
Nathan M3 horn
All-weather window on engineers side
DT&I style extra grab irons on nose
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
PROTOTYPE SPECIFIC INFORMATION
By the early 1970s, many first generation diesels were reaching the end of their service lives. The most common replacement locomotives became the GP40-2. EMD began production of the 16-cylinder, turbocharged, 3000 horsepower engine in 1972. These locomotive were developed for service where higher horsepower and faster service were preferable. A major feature for the GP40-2 was the introduction of the -dash 2- modular electrical cabinet. For more than 40 years, the GP40-2 has worked main line freights, locals, switching jobs, yard service, and helper service. Many remain in service today.
HO 52Ft Mill Gondola - D&RGW Railgon #340057
NEW FEATURES:
Refined end-sheet molded-on details
Improved rivet and bolt details
Corrected wire grab-iron placements
New top-chord details
New jack reinforcement pad details
New coupler cut lever mounting details
MODEL FEATURES:
Separately applied wire grab irons
Body-mounted McHenry operating scale knuckle couplers
33inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO Instant Horizons(TM) Background Scene - City to Country
DIMENSIONS: 24 x 36 inches
Create a unique background for your layout with Instant Horizons. Easy to install, these printed backdrops add depth and distance by creating a smooth transition between you actual scenery and backdrop.
These special views smooth the transition between different kinds of scenery, creating a more natural and realistic change.
AK Interactive Wash : Dark Brown
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - New York Central - Capital Scheme #8002
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO RTR Trinity Rail 3281 Cu Ft 2-Bay Covered Hopper - CIT Group/ Capital Finance (NRLX) #34156
(Ex-Ciment Quebec, 2005, gray, yellow conspicuity marks)
Product Information
This HO Scale TrinityRail 3281 Cu.Ft. 2-Bay Covered Hopper is based on a common late-1990s and later prototype commonly used to haul frac sand, roofing granules and similar materials. With the boom in frack sand traffic it isnt uncommon to see these prototypes used in unit trains. Prototype cars measure 41ft-11inch long, and the cars are equipped with three or five round loading hatches and a pair of gravity outlets for commodity off-loading. Compared with earlier 2-bay covered hoppers, these cars are distinctive. Notably, an overhanging arched roof, heavy top reinforcement stiffener, and folded jack pads at the bolster are spotting features for the Trinity 3281. This design has proven to be popular with shippers and railroads alike. The HO scale freight car features an injection-molded body, applied wire grab irons, photo-etched walkways and working shelf-type knuckle couplers without trip pins for scale appearance. Other details include roadnumbers printed on the truck sideframes, coupler cut levers, NMRA compliant car weight, trucks with spinning bearing caps, multiple roadnumbers per scheme and graffiti on select roadnumbers.
Evergreen Scale Models 3047 .047in Opaque White Polystyrene Passenger Car Siding (1Sheet)
All Scale Tortoise Switch Machine Replacement Parts - Circuit Board
Product Information
Replacement parts for Circuitron Tortoise Switch Machines make it easy for you to maintain your turnout motors in tip-top shape! Common parts available include Spring Wires, Retaining Screws, Fulcrums, Output Arms with attached contacts and Circuit Boards. See the entire line of Circuitron Tortoise Switch Machines and products.
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Central Vermont - Green w/ Noodle #3604
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
Juneco Scale Models Rerailers carried by most CN & CP Diesels (2/pkg)
White die-cast metal
HO 50ft PS-2 CD 4427 Covered Hopper - Chicago & North Western #96310
Add a signature car to your covered hopper fleet with the Walthers Mainline 50ft Pullman-Standard PS-2 CD 4427 3-Bay Covered Hoppers!
Fully assembled and finished in a variety of colorful schemes perfect for 1960s to early 2000s layouts, features include:
-Limited edition - one time run of these car numbers!
-Prototypes handled all types of grains, feed and similar loads
-Matches prototype dimensions
-See-through running boards
-4-3-4 exterior rib pattern
-Bottom outlet gate details
-Placard name plates as appropriate
-Correct 36in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO F89F Trailer - TTX/Yellow #153221
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast underframe
- Wire formed brake plumbing
- Detailed deck
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Minimum radius: 22 inches
- Recommended radius: 24 inches
HO 50ft Evans DD Plug Boxcar - HS #11481
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Trenton Works 6348 CN Boxcar - Canadian National (As Delivered) #598167
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
HO GE Dash 9-44CW - DC/DCC Ready - Quebec, North Shore & Labrador QNSL #404
QNSL FEATURES:
Front and rear marker lights (fully functional in DCC mode)
Low mounted number boards
K3 horn
Front ditch lights
Standard brass bell
Purchased in 1998 to help replace their aging fleet of older EMDs, Quebec, North Shore and Labrador turned to GE for 11 new high horsepower Dash 9 C-44CW locomotives. Painted in a bright orange and yellow scheme, these units were used in heavy iron ore service along the north shore of Quebec, Canada.
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
Conrail Northern Region In Color - Douglas N. Leffler
RELEASED: February 1, 2017
Conrails Northern Region was comprised of three divisions of the former Canada Southern Railway and Michigan Central Railroad routes through Canada and Michigan. These three Conrail divisions were called the Canada Division, Detroit Division and Michigan Division. The illustrations and text in Conrail Northern Region take the reader on a journey on all three divisions from Niagara Falls, Ontario, Canada west to Detroit and beyond through Southern Michigan.
HO Crates, Kegs & Barrels Set (30pcs)
Loads of unfinished metal cast details to make your loading dock complete! Set consists of: 2 of every crate, keg, and barrel in our product line for a total of 30 pieces.
HO FCA 52ft 100-Ton Bulkhead Flatcar - CWLX #200134
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2016 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
N Scale ACF 3560 Center-Flow Covered Hopper - Chessie System (C&O) #601343
Features:
Prototypical painting and lettering
Plastic body with die cast chasis
Removable coal load
Product Information
The Atlas Trainman ACF 3560 Center-Flow Covered Hopper is based on common steel cars used by many railroads for handling potash, fertilizers, chemicals and more. It features an injection-molded body with applied plastic details where appropriate, smooth paint, crisp lettering and AccuMate(R) knuckle couplers.
HO SD75M - DCC & Sound - Santa Fe BNSF #226
Detailed Information
BNSF FEATURES:
Faded paint colors
Small EMD plow
Round deck mounted front ditch lights
Large Sinclair antenna
Early EMD trucks with hidden bearings
Road number specific details and artwork
Part of the original Santa Fe 1994 order, these SD75Ms are depicted as late in their life. Just before they were sold to PRLX, they soldered on looking beaten and battered, but still earning revenue for their owner. Renumbered to the 8200 class in the 2000s, they eventually returned back to their original Santa Fe numbers again, but with BNSF patches.
ROAD NUMBER SPECIFIC FEATURES:
#226
Ex-ATSF 226
small cab numbers
added rear number boards
yellow frame stripes
#231
Ex-ATSF 231
large cab numbers
yellow frame stripes
#249
Ex ATSF 249
large cab numbers
yellow frame stripes
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Weathering Pigment
Ultrafine high quality pigment for modelling.
The definitive collection of pigments designed exclusively for modelers. A series of basic necessary and frequently used colors mixable between. AK Interactive pigments are much finer than any of the existing products on the market and contain nearly 3 times the quantity of other leading brands at a lower price .These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve. Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.
HO 100-Ton Open Hopper - Penn Central #480359
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
N Scale Horizon Fleet Dinette - Amtrak Phase III Wide #53501
Super-detailed, as is Tradition
Rapido brings their experience with passenger car models to this long warranted fleet of cars used for intercity travel across America (and even into Canada). The Rapido cars will feature the same great attention to detail youve come to expect, including free-rolling wheels, detailed underbodies, interior lighting and more.
Coach, Dinette and Club Dinette cars available
Full underbody details unique to each car style
Full multi-color interior detail with separate seats
Folding steps or fixed stairs as appropriate
GSI G70 trucks with free-rolling, turned-metal wheelsets
Accurate painting and lettering
Constant interior lighting in DC and DCC
Working marker lights
Separately-applied metal grab irons
N Scale Hot Air Balloon - Kit
DIMENSIONS:
9.7cm Diameter, 13.5cm Tall
PA-1 Single Locomotive - DCC & Sound - New York Central #4200
Includes:
No Dynamic Brakes
Our first run of Alco PA models feature:
Correct nose and roof profiles 3D-scanned from the prototype
Loads of roadname-specific details
A units and A-B sets available
Dynamic or non-dynamic brake versions, where appropriate
Full underbody piping and conduit
Separate grab irons and handrails installed at the factory
Etched-metal grilles, where appropriate
Lit number boards, headlights and green and white class lights
Lit control stands and full cab interior
Operating Gyralite or red Mars light, where appropriate
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options
Now with a TCS Sound Decoder featuring Rapidos exclusive
Alco 244 sounds, programmed to operate seamlessly with
Rapidos other sound-equipped locomotives.
HO 40Ft PS-1 Boxcar - ATSF (Bx57 Grand Canyon) #31740
Date: BLT 5-50
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
4mm Static Grass - Spring Grass (20g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. Mixing various lengths and colours of grasses can produce highly realistic textures and effects.
HO Modern Communication Tower Kit
Bring a must-have detail to your HO skylines with the Modern Communication Tower kit from Cornerstone
Typical of cell phone towers seen worldwide, this easy-to-build structure kit features:
Parts to build 2 complete towers
Tall and Short antennas included
Molded in sturdy gray ABS plastic reinforced with glass fiber to resist bending
Build a complete installation with the Cornerstone Modern Electrical Gear (933-4075) and Chain Link Fence (933-3125) Kits, both sold separately
Conifer Tree Value Pack - Ready Made Trees 2-1/2 - 4inch 6.4-10.2cm
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors.
Evergreen Scale Models - Opaque White Polystyrene Z Channel .156In x 14In (3 pcs pkg)
HO EMD SD7 - DCC & Sound - EMD Demonstrator #991
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO RTR Ford C Telesqurt - White
Key Features
Ford licensed model
Factory assembled with all detail parts applied
Medium wheelbase chassis with conventional cab
Fully extending Telesqurt arm with fire monitor and photo-etched ladders
Molded cab interior with seperately applied steering wheel
Clear molded windows
Vinyl tires
Detailed Information
Overview:
The Ford C Telesqurt is the latest addition to Athearns Ready To Roll line of fire vehicles. Designed to bring the maximum amount of fire suppression right where it is needed, the Telesqurts telescoping boom raises to place the fire monitor in the thick of the action. This exacting replica is sure to fit right in to any HO fire department.
MODEL FEATURES:
Ford licensed model
Fully extending Telesqurt arm with fire monitor and photo-etched ladders
Clear molded windows
These models are unnumbered and unlettered
Medium wheelbase chassis with conventional cab
Molded cab interior with seperately applied steering wheel
Vinyl tires
Signal Driver Cable Kit
Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets.
Use this kit to make signal driver cables to connect your SE8c to the signals on the railroad. Make the cables any length that you desire and place the signal connectors at the locations where you will install signals. All the signals are carried neatly in the ribbon cable so you can avoid a “bird’s nest†under your layout.
Plastruct 90105 OD 3/16 Butyrate Tubing (9pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
WHITE
OUTSIDE DIAMETER (O.D.)
3/16
4.8mm
INSIDE DIAMETER (I.D.)
3/32″
2.4mm
THICKNESS IN INCHES
3/64
THICKNESSS IN MM
1.2mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
TRADITIONAL BUTYRATE ROUND TUBING Use for piping in industrial, residential, commercial and many other model settings. May also be used as round pylons in bridge, pier and other structures.
HO 53ft Railgon Gondola - Delaware & Hudson #15080
(black, white, large name)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 60ft Bulkhead Flatcar - MILW #67232
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
HO F30A 50Ft Flat Car w/Sleeper Van - Conrail (CR MOW) #62089
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
Rapidos F30 Camp Cars Feature
All-new camp trailer loads in four styles
End railings and platforms
Photetched details
Multiple car numbers per scheme
HO USRA Double sheathed wood boxcar
Wabash
Includes road numbers 79687, 79834, 79945, 80176
During World War I the US railroads were struggling to keep up with wartime traffic, in part because of a shortage of service- able freight cars. In an attempt to solve this problem, President Wilson nationalized the railroads under the United States Railway Administration, or USRA. One of the first tasks assigned to the USRA was to develop common designs for new freight cars. Among these was a 40ft double-sheathed wood boxcar with a fishbelly steel underframe.
Starting in 1918, nearly 25,000 copies of the double-sheathed boxcar were built and delivered to 24 railroads throughout the country. The cars were well received, and many cars continued in regular service on many roads into the 1950s with many updated to the newer AB-brake system.
Rapido’s new model of the USRA double-sheathed boxcar features an all-new body with correct fishbelly underframe and correct free-standing details. Models will be equipped with either KC or AB brakes as appropriate. These cars fill a need for a state-of-the-art model of this common car on any transition-era or earlier period layout.
Model Features
Accurate new tooling
Correct details including roof and handbrake
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Accurate decoration
Fully decorated and assembled
Factory-installed Macdonald-Cartier couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO RTR SD39 - DCC & Sound - Guilford/Boston & Maine #690
This locomotive is Primed-for-Grime!
BM FEATURES:
Built as Illinois Terminal, these SD39s were purchased by the NW before going to the Guilford. Our models represent the time period before they were painted into Guilford grey and orange. These well worn black painted units still retained their as-built features such as: battery box-mounted -gong- bell, smaller fuel tank, non DB hatch, and hi-mounted brake cylinder trucks. #690 features a very faded -Norfolk Western- lettering on the long hood.
SD39 SERIES LOCOMOTIVE FEATURES:
Separately applied air tanks
Coupler cut levers
Rubber MU hoses
Photo-etch stainless steel windshield wipers
Fine scale handrails
Non-sound version features 21-pin NEM DCC plug
See-through dynamic brake and radiator fans
Curved radiator fan grab iron
Exhaust stack
Frame-mounted bell (unless noted)
Detailed 4000 gallon fuel tank (unless different capacity is noted)
Flexicoil-C trucks with high or low brake cylinders (per prototype)
McHenry scale knuckle spring couplers
See-through cab windows
Bi-directional LED lighting
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Painted and printed for realistic decoration
Highly-detailed, injection molded body
Minimum radius: 18inch
Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard Econami sound decoder by Soundtraxx
Engine startup sound sequence
Dynamic brake sound or Non-Dynamic Straight to idle on F4
Extra prime mover and horn sounds exclusive to Athearn
Sounds recorded from a real EMD 12-645E3
Multiple bell sound files user configurable via Configuration Value (CV)
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Current Keeper ready with on board expansion plug
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via CV changes
N Scale Locomotive Coupler Conversion Kits - MRC 2-8-4 Berkshire (2 Pair)
HO 53ft Reefer Container - JB Hunt
A cool addition to contemporary HO intermodal operations, the Scenemaster 53ft Reefer Container will look great on rails or roads!
Features include:
- All-new model!
- Prototypes now in domestic service across North America hauling perishable food products
- Highly detailed refrigeration unit
- Realistic body details
- Colorful, contemporary paint and lettering schemes
- Perfect loads for WalthersProto or WalthersMainline well cars (sold separately)
- Instant detail for terminals, highways and industrial scenes
- Fully assembled, ready to use
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX (Grey Data Only) No Road Number
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO RTR PS 4740 Covered Hopper - Illinois Central (3pkg)
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Body-mounted McHenry operating scale knuckle couplers
36inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Multi-packs feature unique road numbers
Weighted for optimum performance
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
HO Alco RS-3 Phase 1 - DC/DCC Ready - Conrail (ex Erie Lackawanna) w/ Large Louvers #5545
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC.
Rail Workers 5 figures, handcart and tools
Five men work to restore the rails and keep them running smoothly, using a hand cart, tools and railroad ties.
Set contains 8 pieces. Colors may vary from actual product.
HO RTR 50Ft PS-1 Boxcar - Missouri Kansas Texas (MKT) #90135
Product Information
This ready-to-run Pullman-Standard PS-1 50ft Boxcar with 8ft 6 Panel Door from Kadee features fine detailing, roadname-appropriate details, accurate paint and lettering, correct trucks with metal wheels and scale-sized Magne-Matic couplers.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14087
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Downtown Deco N Scale - Kitty Corner - Kit (Adult theme signs)
N Scale 53ft Stoughton Containers - Hub Group, Set #1 (3pk)
MODEL FEATURES:
- Fully assembled
- Magnetically stackable
- Each container individually numbered
- Razor sharp printing and painting
Hallmark Models Canadian National Brass Dynamometer Car
Display picture is accurate to the item being sold. No Windows installed
Pre-owned, but in great condition!
Comes in the original Box!
Please note that this item is final sale.
No refunds or exchanges.
HO FEF-3 4-8-4 - DCC & Sound - Union Pacific #835
Detailed Information
FEF-3 FEATURES
UP 835-844 came in 1944 as coal burners with 80-inch drivers, similar to the FEF-2s but with dual smoke stack and different front end pilot.
ROAD NUMBER SPECIFIC FEATURES:
#835
Solid Black
Oil Burner
Triple Stack
Smoke Lifters
Era 1952+.
#844
Oil Burner
Double Stack
Smoke Lifters
Era 2017+. High-Shine Black -Race to Promontory- version
as used in tandem with Big Boy 4014 on May 4 2019
as well as excursion service. Comes in a beautiful limited-edition box with special graphics.
STEAM LOCOMOTIVE FEATURES:
Illuminated number boards
Metal handrails
Builders plates
Adjustable cab windows
Non-operating classification lights
Blackened metal wheels
Oil burner
Accurate oil tender details
Feedwater heater per prototype
ATS cabinet per prototype
Swing coupler pocket
Double or triple smokestack per prototype
Single or double generator per prototype
Side rods colored to match the prototype
Illuminated red signal light except on 2016 version of #844
Boiler backhead with full details and printed gauges
Synchronized chuff, whistle, bell, blow-down, air compressor, dyno and pop-off valve sounds
User-controlled whistle, short whistle, bell, squeal, coupler crash, injector, water stop and light dimmer
Individually-applied detail parts, including brass-painted bell and whistle, piping, valves, generator, steps, air pump, air tanks, reverser and coupler lift bar
Front coupler pocket can be inserted to mount operating coupler
Minimum radius: 22inch
NEW FEATURES:
Dual cube speakers for great sound quality
Lighted firebox flicker effect with see-through firebox door
Upgraded headlight lighting with brighter LED
Improved loco-to-tender connection harness for increased durability and serviceability
SOUND EQUPPED MODELS ALSO FEATURE
Tender-mounted DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Chuff, whistle and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO EMD SW1200 - DCC/Sound - Soo Line #1203
- Flexicoil Trucks
- Flasher/Strobe
- ex-MN&S
The HO Scale Rapido SW1200 features:
- Designed from original blueprints and field measurements
- Heavy diecast frame, chassis and gearboxes for superior pulling power
- Rapidos renowned silky smooth-running drive system
- Working cab interior light and inspection lights
- Fully detailed Type A or Flexicoil trucks, as appropriate
- Full cab interior with working cab interior light and non-working fire extinguisher and fridge (where appropriate)
- Working headlights and illuminated number boards at both ends
- Some models have a rotary beacon or flasher/strobe as appropriate
- Separate handrails, including crash bars inside the cab
- Multiple exhaust stack and battery box door styles
- With or without working drop steps, as appropriate
- Incredible underbody piping and conduit detail - a Rapido hallmark!
- DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings from a 567 prime mover
HO 53ft GSC Flatcar - Delaware & Hudson #16509
FEATURES:
- One-time run of these car numbers, limited quantity available, order now!
- Now with die cast metal body for excellent performance empty or loaded
- Prototypes in service from 1950s to early 2000s - some in work train service today
- Used to carry all kinds of cargo including machinery, lumber, steel shapes, rail and various building materials
- Fully assembled with finely detailed body and deck
- Correct 33 inch RP-25 metal wheelsets
- Proto MA(TM) metal knuckle couplers
HO Scale Thrall 53Ft Articulated Well Car Set - TTX #728674 (3pkg)
Features:
Each car consists of three wells--A,B & C.
Walkway variants specific to prototype
Etched metal detailing
Detailed air reservoirs
Detailed brake valves
Sharp hand grabs and stirrups
Runs on 18inch radius
Recommended for 22inch radius
Floor pin holes for Atlas and other brands of containers
Product Information
When the domestic intermodal container market settled out in the late 90s, the 53Ft long container emerged the winner. Car builders responded with new wells of like size to accommodate the new standard. Introduced in series service in early 2000, Thralls triple 53Ft articulated well car was certainly the best looking of the 53Ft wells. Angular wheel cutouts, 3 flared-bottom wide and 8 narrow side posts give this intermodal age well car character.
HO Scale 53 Hyundai Hi-Cube Container 2-Pack - EMP ex-STAX No Patches - EMHU 239722/239886
HO - 3D Tall Air Compressor (6 per package)
HO 50Ft PCF B70 Boxcar - w/ Youngstown Doors - SSW/Cotton Belt (with DFL) #66859
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
N Scale Short Barrel Ore Hopper - Ontario Northland: Progressive Green #6505
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
85ft General American G85 Flatcar - Trailer Train - GTTX - Brown #300352
Product Information:
Limited edition - one time run of these road numbers
Prototypes handled trailers and containers from 1961 to mid-1980s - used for general service loading into the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in up or down position or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
33In turned metal wheelsets
Proto MAX metal knuckle couplers
Add more realism in minutes with SceneMaster trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24In
HO ACF PD3500 Flexi Flo Hopper -
Conrail CR Version 3(996H) Conrail Repaint-inservice 1976
Car No. 897712
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO 1937 AAR 40Ft Boxcar - CP5/5 Ends - Canadian Pacific (Spans the World) #227270
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Marine Industries Piggyback Flatcar - Canadian Pacific (6 pkg) #1
Includes Road Numbers:
505625, 50629, 505631, 505643, 505649, 505652
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
2mm Static Grass - Winter Grass (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
HO GMD SD40-2 - DCC & Sound - Ontario Northland #1733
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
Metrolink #859
Teal Ribbon Repaint
Model Features:
•Scaled from field measurements & diagrams of a GO F59PH
•End metal handrails with plastic stanchions
•Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
•All-metal etched grilles
•Full cab interior
•Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
•Operating headlights, rear light, and ditch lights
•GO units feature functioning tri-color class lights (white, green and red)
•American units feature functioning red marker lights
•Accurate sounds recorded from a GM 12-710G3A
•DCC/Sound units come equipped with an ESU LokSound decoder
N Scale 52Ft Mill Gondola - Wisconsin Central #54241
Detailed Information
MODEL FEATURES:
Body-mounted McHenry knuckle couplers installed
Fully assembled and ready for your layout
Screw mounted trucks for accurate tracking
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO 45Ft Trailmobile Dry-Van Trailer - Taggart Trucking #5431
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
HO Thrall 2743 Gondola - CEFX (Ex-CP) #33430
FEATURES:
Prototypical scale height reflecting the new higher capacities standard.
Fourteen side posts
Detailed brake components
Etched platform
Etched end reinforcement plate
Detailed ladders and stirrups
Metal hand grabs
Metal brake rods
Air hoses
Corner pins and correct open notch
Detailed side post support angle plates
Optional coupler pocket for Kadee #78 or Accumate Scale Coupler
Accurate painting and lettering
Ready-to-run
HO 60ft Hi-Cube Plate F Boxcar - BNSF #761082
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline(R) 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO RTR 53Ft Rivet Side RoadRailer Trailer - Norfolk Southern (Triple Crown) #460003
Rivet Side Large Triple Crown Norfolk Sou.
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
Models depict in-service locomotives from the mid-1990s and beyond.
Road name and road number-specific painting and lettering.
Multiple road numbers offered.
New and improved high-torque motor and drive mechanism guarantees smooth operation.**
Operating radiator fans. Improved radiator fan drive unit with quieter operation and selective fan control.**
All-wheel power pickup and all-axle drive.
Heavy die-cast, zinc alloy chassis.
AuroraJanney scale head replica couplers installed.
NMRA RP-25 wheel contour with Code 110 tread width.
Minimum radius: 18? (recommended 22?)
* Lighting functionality is limited on DC models operating on DC track power.
** Improvement over our previously-released HO scale SD60F.
DC Version Features:
DCC ready with 21MTC connector.
Dual sugar-cube speakers (functional after installation of a DCC sound decoder).
Operates on DC track.
All Scale Learning Kit - Scenery Details
Learn simple techniques for creating detail on any layout. There is enough material included in this kit to detail a 2 x 2 feet surface.
Value-packed tools specifically developed to teach beginning modelers and other hobbyists how to use the Terrain and Landscape Systems. Learn to sculpt terrain, cast, color and install rocks, landscape various scenes, create paved areas, make trees, model water features and other scenic details. Reseal packages for easy storage.
HO 40Ft Smooth Side Containers - K-Line KKLU #1 (3pkg)
MODEL FEATURES:
Fully assembled
Easily stackable
Each container is individually numbered
HO NSC 5304 Boxcar - Canadian National (Late 80s Repaint) #557214
The Rapido NSC 5304 cu.ft. CN Combo Door Boxcar features:
Separate grab irons installed at the factory
100-ton Barber S-2 trucks, with metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe
MidSouth 1035 (gray, white, green)
Throughout the 1970s, the Paducah shops of the Illinois Central rebuilt worn out EMD GP7 and GP9 locomotives into the GP-10. These models feature a smooth-powerful drive, prototype-specific details, Kadee(R) couplers,laser-sharp lettering and etched metal details.
N Scale Built-&-Ready - Ethyls Gas & Service
Set Built-&-Ready Structures on your layout right out of the box! These hand-painted and fully-detailed buildings are great for building cities, towns and villages. They are molded with high architectural detail and include realistic weathering, signs, fixtures and accessories. Depending on the style of structures, additional features may include window treatments, printed interiors and/or lighting.
Ethyls Gas & Service is a vintage gas and service station that is loaded with charm and nostalgia. Details include old globed gas pumps, trashcans, two old metal chairs, a cola machine, an ice machine, and pallets of old junk and car parts. The fenced outdoor service area features an oil-stained concrete floor, a lift, freestanding kerosene tank, old tires, a dolly and more! See photos for footprint.
This structure comes with pre-installed LED lighting made for use with the Just Plug Lighting System.
25mA RoHS Compliant
F30A 50Ft Flat Car: Penn Central #701987
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
10Ft 6In Modified 1937 AAR Boxcar - Southern Billboard #20275