Canadian Pacific 36320 Stacked Block
Trucks And Couplers Micro-Trains
Body-mounted couplers
HO 50Ft PC&F Riveted Box - 8Ft+8Ft Landis - Evergreen (EFCX) #3329
Detailed Information
GENESIS FREIGHT CAR FEATURES:
Fully-assembled and ready-to-run out of the box
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Trucks with animated rotating bearing caps
Machined metal wheels
Wheels with RP25 contours operate on all popular brands of track
Weighted for trouble-free operation
Body-mounted, McHenry operating scale knuckle couplers
Separate wireform grab irons, etched metal coupler platforms, and/or etched metal roofwalk
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Replacement parts available
MODEL FEATURES:
New road numbers and paint schemes
70-Ton roller bearing trucks with operating bearing caps
Fully-detailed full cushion underframe, where applicable
Era: early 1970s to present
Separately applied door closure rods, side ladders, metal grab irons
Minimum radius: 18inch
and etched metal end platforms
Recommended radius: 22inch
HO G2 SD80MAC - DCC & Sound - CSX/YN3 #4590
CSX FEATURES:
Former CR units
Operating forward and reverse red marker lights
Correct horn and antennas per road number
Approved by CSX experts
Just as a batch of SD80MACs were sent to NS after the CR split, CSX acquired a batch as well. After a short period of running around patched, they were all repainted into CSXs -YN3- scheme. Only one, CSX 801 (which was renumbered to 4591), received the -YN2- scheme. It eventually got the YN3 treatment.
ROAD NUMBER SPECIFIC FEATURES:
#801
Fresh YN2 repaint with CR details.
#4591
YN2 paint with patched numbers
K5 horn
white painted roof with GPS dome.
#4590
YN3 repaint
-Spirit of Benning-
Leslie 3-chime horn
white painted roof with GPS dome.
#4600
YN3 repaint
K-5 horn
white painted roof with GPS dome.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
CV chart included in the box
HO 39Ft Trinity 3281 2-Bay Covered Hopper - Blue Circle Cement #247
Product Information
WalthersMainline makes it easy to add more business to your HO Scale railroad with the 39Ft Trinity 3281 2-Bay Covered Hoppers! Built especially to handle heavier materials, theyre often seen in unit trains moving loads of fracturing sand to new oil fields. Based on the later production prototypes introduced in the 1990s with seven side panels (two narrow and five large), they can also be found moving cement, bentonite and other heavier cargoes. Ready for service in a variety of modern schemes, each with four numbers, theyre perfect for serving the Cornerstone(R) Glacier Industrial Sands (933-4035), or the Road-to-Rail Aggregate Transfer (933-4036) structure kits, both sold separately. Features of these models include:
One time run of these roadnumbers, order now - limited quantity available
In service from late 1990s to the present
Built especially for heavier materials including fracking sand, cement, bentonite and more
Separately applied brake gear, running board, discharge gates, inlet hatches and end ladder cages
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
FEATURES:
- One time run of these road numbers, order now - limited quantity available
- Prototypes seen from coast-to-coast 1974 to the present
- Handles all types of general freight loading
- Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
- 41ft 3in Truck Centers
- 15ft 2in Tall
- 10ft 8in Wide
- Fully assembled
- Correct 33in RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
All Scale Tortoise Switch Machine Replacement Parts - Circuit Board
Product Information
Replacement parts for Circuitron Tortoise Switch Machines make it easy for you to maintain your turnout motors in tip-top shape! Common parts available include Spring Wires, Retaining Screws, Fulcrums, Output Arms with attached contacts and Circuit Boards. See the entire line of Circuitron Tortoise Switch Machines and products.
Expansion Track -- 8-3/8"-9-9/10" 212-252mm
HO 53ft Stoughton Containers - EMP, Set #2 (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Separately applied door closure rods
- Each container individually numbered
- Razor sharp printing and painting
HO ATSF PS4750 Covered Hopper - Santa Fe (Delivery Gray 10-1979) #315965
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
ATSF -Delivery Gray 10-1979- is now available in the distinguished light gray paint with light blue -Santa Fe- lettering. This light gray scheme is very different from the previous Tangent ATSF offerings! The Santa Fe GA-905 class were built by Pullman Standard and leased from North American Car Corporation. Check out that sharp red/white/blue NACC badge! Featured details include prototypically accurate body-mounted brake hardware and scale-sized Miner -Selflok- outlet gates. We didnt stop there. This car is loaded with accurate Pullman-applied ATSF graphics and data. From the distinctive narrow style Roman numbers to individual North American Car Corp. car serial numbers on the center sill ? its all there.
Model Wash - Dark Brown - 35ml Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Brown is recommended for models painted in light or sand colors, and ideal for application on tank tracks and pin washes.
HO Scale Diesel Loco Details
HO PS-2-4427 High Side Covered Hopper - TLDX Delivery Yellow Lease 3-1967 #6865
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
TLDX Delivery Yellow Lease 3-1967 wears the popular and common version of the TLDX private leasing yellow. The Pullman leasing lettering is simple, with accurate TLDX reporting marks and data. The side placard adds a bit of pop to this scheme, advertising Pullmans Transport Leasing Division to shippers. These TLDX cars were built in 1967, and that translates to earlier Pullman features like square stirrup steps, center sill supports between the bays, solid end running board supports, Miner gravity gates and ribbed-style roof hatches. The model is equipped with 100-ton Barber S-2 trucks with separately applied brake beams along with rotating Timken caps. This relevant lease scheme is perfect for the 1960s-1980s.
Spray Can - Pearl Green (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 30ft Galvanized Steel Grain Bin - Kit
(Narrow - 2.66 inch Corrugation)
Corrugated steel grain bins are a staple in any agricultural setting, placed on farms, elevators, industries, and beside railroad tracks. Used with a variety of farm commodities, these bins provide a safe, dry place to store that commodity until it goes to market.
With several styles to choose from, these grain bins will look right at home on your layout. They feature prototypical corrugations, realistic galvanized steel appearance, various side sheet heights, and a variety of diameters.
Narrow corrugation bins have corrugations spaced a scale 2.66 inches and the rings are 32 inches tall. Wide corrugation bins have corrugations spaced 4 inches apart with 44 inch tall rings.
All bins are easy to assemble - just stack the rings, glue them together, attach the roof and you are done! Every ring comes as one solid piece, so no time consuming and messy assembly of individual side sheet pieces to create each ring, saving you time and frustration!
What size bin will fit your space? Try our grain bin size calculator or printable template.
https://www.iascaled.com/store/GrainBinSizeCalculators
https://iascaled.com/docs/ho-bin/GBM-HO.pdf
HO RTR FMC 3-Bay 4700 Covered Hopper - Western Pacific #12065
Detailed Information
MODEL FEATURES:
Separately applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, brake cylinder and triple valve
100-ton trucks with 36inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
Factory applied roof walk, roof hatch, end details, ladders and wire grab irons
Two outlet grate variations
Accurately painted and printed on a highly detailed, injection molded body
Window packaging for easy viewing
Minimum radius: 18inch
See-through etched metal end platforms
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Interior plastic blister safely holds the model for convenient storage
All 3-packs feature unique road numbers
Golfers (6/pkg)
HO 12Ft FMC 5327 Plug Door Box - QGRY #77101
All new tooling with accurate dimensions
Photo-etched cross-over platform
Separately applied grab irons, end ladders and brake wheel
33in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
All models are representative of prototypical paint schemes
Minimum radius: 18in
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of ?In Service? equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
PROTOTYPE AND BACKGROUND INFO:
It was the mid 1970s, and the incentive per diem box car boom was just beginning. New, brightly painted box cars seemed to appear overnight. Many were lettered for various short lines. FMC (Food Machinery Corporation) was a significant builder of many of these cars. The 50? outside post, non-terminating end box car, became the foundation for new per diem cars built in the 1970s. The 50? FMC cars also varied in door configuration and style to better suit each customer. These models can still be seen today in the modern railroading scene.
IJN Gray Green Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
N 4-6-6-4 Steam Challenger - DCC & Sound - Union Pacific #3997
ETA: October 2022
Detailed Information
Union Pacific
In the spring of 1941 UP locomotive designers began working on a locomotive to team up with the new 4-8-8-4 Big Boys then under construction at Alco. The Big Boys were designed to pull heavy freights up the Wasatch Range in Utah to the division point at Green River, WY. What was needed was a locomotive to take over at that point that could speed the freights eastward across the Wyoming Division. Building on their experience with the original CSA 4-6-6-4 Challengers UP and Alcos designers developed a newer and better Challenger type locomotive. The result was a group of 65 4-6-6-4 Challenger built in three separate groups during World War II.
ROAD NUMBER SPECIFIC FEATURES:
#3985
Modern Excursion version
Oil Burner
Era 1980s - 2000s
#3933
Coal Burner
Dual smoke stack
Tender bunker coal extensions
Era 1940s - 1959
#3967
Coal Burner
Dual smoke stack
Smoke Lifters
Era 1940s - 1959
#3997
Coal Burner
Dual smoke stack
Tender bunker coal extensions
Era 1940s - 1959
Union Pacific
UP painted several of their Challengers in their two-tone grey paint scheme for passenger service. They also added smoke lifters and converted many to oil burners as well.
ROAD NUMBER SPECIFIC FEATURES:
#3976
Two-tone grey w/ yellow lettering and striping. Oil burner
Dual smoke stack. Era: Late 1940s - Mid-1950s.
STEAM LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Full cab interior with boiler backhead with printed gauges
Individually applied piping, valves, generators, etc.
Operating eccentric cranks on both sides operating in correct direction
Headlights and indicator number boxes (number boards) with directional light change
Five pole, skewed armature motor with flywheel for smooth operation
Pivoting front and rear engines for negotiating 11inch radius curves
See-through running boards
See-through cab windows
McHenry scale knuckle couplers
LED Lighting for realistic appearance
Fully-assembled and ready-to-run
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum recommended radius: 15inch
SOUND EQUIPPED MODELS ALSO FEATURE
Tender-mounted DCC decoder with SoundTraxx Tsunami2 sound
Sound, units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, whistle, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Built-&-Ready Landmark Structures - Country Store Expansion
Assembled - 6-7/16 x 5-1/2 inches
(16.4 x 14cm)
The general store is expanding and construction is well underway on the new addition.
HO PS4750 Covered Hopper - SOO Line (Original 1-1980) #75472
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
SOO -Original 1-1980- brings back a popular PS4750 paint scheme. We offered a different 1979 group of SOO cars about 8 years ago (!) and ever since, our mailbox has been full of requests for MORE SOO. We are very pleased to finally offer another SOO lot, this time from the 400-car 1980 Pullman group. These covered hoppers feature truck mounted brake beams, a side-mount train air line and scale-sized Miner -Selflok- outlet gates. Painted in that special shade of -Soo Line White- (Soo modelers know exactly what we mean), the models show off the classic yellow wheat stalk graphics and green SOO LINE roadname. An accurate and critical car for SOO and CP Rail modelers and lovers of the PS4750 everywhere, these cars continue to serve in grain and in buffer car services.
N Scale Standards Gauge
Designed and developed by the NMRA (National Model Railroad Association) Engineering committee, this pocket sized gauge enables you to check all important dimensions on your track and rolling stock as follows:
Gauge of track and turnouts
Flangeway depth and -check gauge-
Clearance
Height of loading platform
If cars do not run correctly, this gauge will help you pinpoint the trouble. Complete instructions come with each gauge
HO 70-Ton 12-Panel Hopper - Denver & Rio Grande #14718
Blt.6-66
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO 52Ft Mill Gondola - D&RGW Railgon #340057
NEW FEATURES:
Refined end-sheet molded-on details
Improved rivet and bolt details
Corrected wire grab-iron placements
New top-chord details
New jack reinforcement pad details
New coupler cut lever mounting details
MODEL FEATURES:
Separately applied wire grab irons
Body-mounted McHenry operating scale knuckle couplers
33inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
48Ft All Purpose Well Car - TTX (Next Load Any Road) #456202
Features:
Floor with correct ovals and cut-outs.
Two hitches
Etched walkways
Four IBC bins.
Detailed brake components
Prototypically accurate paint schemes
Recommended 24inch radius
HO Dash 8-40CM - DCC & Sound - BC Rail: R/W/B w/ Frame Stripe #4626
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
Evergreen Scale Models 9060 - .060in Plain Opaque White Polystyrene Sheet (1 Sheet)
6in x 12in SHEET
HO 53Ft Gunderson Husky-Stack Well Car & Containers - TTX (Patched Logo) #646851
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
HO RTR SD39 - DCC & Sound - Southern Pacific #5298
Detailed Information
SP FEATURES:
By the end of the SP in the mid 90s, a small handful of SD39s were used around the LA area, known as -LA Basin Haulers-. They were used for heavy switching duties between Long Beach and West Colton, sometimes venturing off to other areas. Two of the numbers offered (5296 and 5298) were renumbered units to avoid conflict with similar numbered Rio Grande SD45s. They were assigned UP numbers, but were all retired before they could be renumbered. All 3 numbers feature unique faded paint and lettering effect per unit number, working beacon with DCC, large ballast boxes, removed gyralights, modified L-Window cab, rear brake wheel, roof mounted bell, large front plow, and P-3 horn.
ROAD NUMBER SPECIFIC FEATURES:
#5296
Ex SP 5315
hi-brake mounted trucks
early inertial grills
faded to red lettering effect
patched numbers
#5298
Ex SP 5317
hi/low brake mounted trucks
late inertial grills
faded white lettering effect
patched numbers
#5316
Still in its original number
hi-brake mounted trucks
late inertial grills
faded white to red lettering effect
SD39 SERIES LOCOMOTIVE FEATURES:
Separately applied air tanks
Coupler cut levers
Rubber MU hoses
Photo-etch stainless steel windshield wipers
Fine scale handrails
Non-sound version features 21-pin NEM DCC plug
See-through dynamic brake and radiator fans
Curved radiator fan grab iron
Exhaust stack
Frame-mounted bell (unless noted)
Detailed 4000 gallon fuel tank (unless different capacity is noted)
Flexicoil-C trucks with high or low brake cylinders (per prototype)
McHenry scale knuckle spring couplers
See-through cab windows
Bi-directional LED lighting
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Painted and printed for realistic decoration
Highly-detailed, injection molded body
Minimum radius: 18inch
Recommended radius: 22inch
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard Econami sound decoder by Soundtraxx
-Engine startup sound sequence
Dynamic brake sound or Non-Dynamic Straight to idle on F4
Extra prime mover and horn sounds exclusive to Athearn
Sounds recorded from a real EMD 12-645E3
Multiple bell sound files user configurable via Configuration Value (CV)
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Current Keeper ready with on board expansion plug
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via CV changes
PSC Transfer Van - Canadian National Test Scheme #76673
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
K5HR24 - For CNW, SP, CSX, NS and Canadian Roads
made of brass
HO RTR 60Ft Flatcar - Burlington Northern BN #630828
MODEL FEATURES:
Working drop ends. Gently lift up & push inward to fold ends down.
Separately applied wire grab irons
Interior detailing
Decorated models fully-assembled and ready to run out of the box
Machined metal wheels and RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Minimum radius: 18inch
HO Lightweight Coach - Erie Lackawanna #1306
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
GP7 Diesel, w/ DCC & Sound - Peoria & Eastern #5615
Era: 1950s+
NYC/PE FEATURES:
Phase II GP7s
Single-chime horns
Non-dynamic
Full skirts
Spark arrestors (P&E)
Intricate striping pattern on pilots
LOCOMOTIVE FEATURES:
Trainline and MU hoses
Coupler cut levers
Drop steps unless noted
MU stands
-Nub- style walkway tread
Bell placement & type per prototype
Fine-scale handrails for scale appearance
Wire grab irons
Lift rings
Windshield wipers
See through cab windows and full cab interior
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Sander lines
Speed recorder unless noted
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Body mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Replacement parts available
Minimum radius: 18In
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included
PROTOTYPE INFO:
In 1949, EMD introduced the GP7. The basic design followed most diesel switchers with the addition of a short hood instead of an end-cab. The hoods were also full height to better accommodate the diesel engine and mechanical and electrical components.
In 1954 EMD upgraded the GP7 to become the 1,750 horsepower GP9. Externally, the first GP9s were virtually unchanged from the last GP7s. Later versions would include different louver arrangements and the last ones would come without the frame skirting. The GP9 was available with all of the fuel tank, steam generator, and dynamic brake options as the GP7, including -torpedo tube- air tanks mounted on the roof.
Many railroads chose to rebuild their GP7s and GP9s for continued service. Often times, it was cheaper to do this rather than purchasing brand-new locomotives.
BNSF w/ PTC #5915
BNSF Features:
All units feature new BNSF style cab roof antennas
Antenna Dome
PTC antenna in polybag
Variety of in-service details per protype road number
Narrow front snowplow
Nose door with window
High number boards
4-window cab side windows
Desktop control stand
Sunshades
Salem air filter
Rear brake wheel
Hi-adhesion trucks
High rear sand filler
Low rear vertical headlight
GENESIS DIESEL LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Replacement parts available
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included
Road number specific features:
#5915
Silver -replacement- plow
HO 85Ft General American G85 Flatcar - TTX (Brown) #300129
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
HO Blunami BLU-PNP8 - 8 Function Bluetooth Controlled Sound Decoder - Baldwin & Other Diesels
Blunami will change the way you enjoy the model railroading hobby! The BLU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturers diesel models such as those made by Atlas, Athearn, and Intermountain Models. It is suitable for a wide variety of models from HO to S scale. It can be operated in three different ways: DC, DCC, and Wireless mode. Using the Blunami App, you can operate your locomotive incredibly easily.
Need Help Choosing a Sound Profile?
We have tons of sounds to match a wide range of locomotives. So many, in fact, we cannot fit them all on one decoder. Therefore, they are broken up into sound profiles of like sounds (EMD, GE, ALCO, etc.). If you do not know which sound profile you need, the best place to start is the Sound Selection References. These will list all the prime movers or exhaust chuffs available on each sound profile.
DYNAMIC DIGITAL EXHAUST :
For added realism, you will love our reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to create the most realistic experience possible.
HIGH-QUALITY SOUND LIBRARY:
Our large selection of sound effects includes:
- Up to 12 Prime Movers in each sound profile
- Up to 12 Bells
- 40+ Airhorns
- Additional couplers, cab chatter, and more!
ADDED REALISM:
Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, and more.
EASY INSTALLATION:
This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.
This 2-amp, universal-style format includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.
Dimensions: 74 x 17 x 5mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 8
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7V ? 22V
Sound Channels: 16
O Scale Utility System - Double-Crossbar Pre-Wired Poles
Description:
Place these O Scale Double Crossbar Pre-Wired Poles alongside railroad tracks to model telephone poles used for communication on the railroad! They are hand-painted and feature weathered wood poles, guy wires and other authentic details. Pre-Wired Poles can be installed in minutes! Simply drill holes, pull poles out of packaging, slide along wire and plant in place.
Built-&-Ready Landmark Structures - Clyde & Dales Barrel Factory
Assembled - 6-5/8 x 5-11/16 inches
(16.8 x 14.4cm)
With its definitive architecture, weathered exterior and rooftop water tank, this old beer barrel factory brings back the past when factories had their own water supply. Individually crafted details include a propane tank, dock-high loading areas, exhaust vent and ladders.
HO - 4750 Cubic Foot Rib-Sided - 3-Bay Covered Hopper - Burlington Northern Santa Fe - #429496 - Small New Image
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-Etched Metal Roofwalk
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
10Ft 6In Modified 1937 AAR Boxcar - Toledo, Peoria & Western #7009
HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - DT&I
#85017
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO 70Ft Single Track Railroad Deck Girder Bridge - Kit
Product Information
This authentic Walthers Cornerstone 70Ft Single-Track Railroad Deck Girder Bridge is typical of bridges used for decades on lines large and small. Railroad deck girder bridges are used in all kinds of arrangements across the continent. Use this kit as a stand-alone bridge supported by Cornerstone Engineered Bridge System bridge abutments or as part of a larger viaduct with piers, Steel Railroad Bridge Towers or Bridge Tower Bents. Once in place, add WalthersTrack Code 83 Bridge Track 948-83004 or other trackage of your choice (each sold separately). Kit parts come molded in dark gray plastic and feature simulated steel construction.
As shown the 70Ft Single-Track Railroad Deck Girder Bridge measures: 9-5/8 x 1-3/8 x 1-1/2inch (24.4 x 3.4 x 3.8cm)
Part of the Cornerstone Engineered Bridge System
One of the most popular railroad bridge designs with unlimited overhead and side clearance for passing trains
Fits steam, diesel and modern-eras
Available in four common lengths to match prototype practice
Build with open or ballasted deck
Perfect as approach spans for bigger Cornerstone and other bridge kits
Add to new or existing scenery with Single-Track Center Piers (933-4550) and Abutments (933-4551) available separately
Complete your installation with WalthersTrack Bridge Track (948-83004 available separately or flexible, sectional and hand-laid track or your own rail
Detailed plastic parts molded in dark gray
Use with Steel Bridge Towers and Bents
(both sold separately) to model a viaduct.
HO Scale - 40/56 Mack LM Tandem Off Road Tractor- Unpainted and Resin Cast Kit
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Erie #79054
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO MLW C-630M - DCC & Sound - Canadian Pacific #4501
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound
DCC and Sound version features LokSound Select decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
HO Scale H1a Hudson Steam - DCC & Sound - Canadian Pacific (Beaver Shield) #2809
-Late walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
Model Features:
- Scaled from field measurements & diagrams of a GO F59PH
- End metal handrails with plastic stanchions
- Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
- All-metal etched grilles
- Full cab interior
- Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
- Operating headlights, rear light, and ditch lights
- GO units feature functioning tri-color class lights (white, green and red)
- American units feature functioning red marker lights
- Accurate sounds recorded from a GM 12-710G3A
- DCC/Sound units come equipped with an ESU LokSound decoder
RS-18u, DCC & Sound - CP Rail w/out Multimark #1825
Era:1986-1998
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
HO Express Motor Freight Lines - Kit
Product Information
Perfect for any roadside industrial district, the Walthers Cornerstone HO Scale Express Motor Freight Lines kit is styled for any steam or diesel-era layout. The kit includes a brick office building and a three-bay service garage that can be built with doors open or closed. The kit also includes vintage gas pumps, oil drums and colorful printed signs for the tanks and pumps. Add Express Motor Freight Lines near industrial districts or in larger industry complexes that maintain their own vehicle fleets. Express Motor Freight Lines is one of many Cornerstone HO Scale industry kits.
Complete trucking facility in one kit
Detailed brick main office
Fits steam or diesel-era layouts
Vintage gas pumps and oil drums
Concrete-block garage - build with overhead doors open or closed
Great addition to roadside and vintage piggyback terminal scenes
Molded in five colors and clear plastic
Colorful printed signs for tanks and gas pumps
Easy-to-build plastic kit
Express Motor Freight Lines measures:
Office: 4-7/8 x 4-1/4 x 2-3/8inch (12.3 x 10.7 x 6cm)
Garage: 7-1/8 x 4-1/16 x 2-1/2inch (18 x 10.3 x 6.3cm)
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (6 pkg) #2
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
16095 Black with Black Truck Caps
16104 Black with Black Truck Caps
16118 Black with Black Truck Caps
16129 Black with Black Truck Caps
16135 Black with Black Truck Caps
16153 Black with Black Truck Caps
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO RTR 53Ft Duraplate RoadRailer Trailer - Norfolk Southern (Triple Crown) #466666
Norfolk Southern
Triple Crown Medium Logo
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
N Scale 1978 Ford Fairmount Sedan - Medium Blue
Features:
Side view mirrors
Head and tail light glazing
Interior detail
Simulated rubber tires
Under carriage detail
HO 5/16 inch Open Web Truss - Cellform Style (2pcs)
Use for roof trusses, space frames and other modern and/or futuristic steel structures. Precision Injection Molded in Styrene Plastic. Manufactured with a special tongue and groove connection feature to quickly and accurately attain the desired length.
SCALE
ALL
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
5/16
HEIGHT IN MM
7.9mm
WIDTH IN INCHES
13/32
WIDTH IN MM
10.3mm
THICKNESS IN INCHES
7/64
THICKNESSS IN MM
2.8mm
LENGTH IN INCHES
4-1/16
LENGTH IN MM
100mm
1mm Static Grass - Dead Grass (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.08 (10pcs pkg)
EMD/Blue #1203 SoundTraxx Tsunami sound
EMD Demo/Lease - Blue
Leader PTC Antenna Array
New feature: Water sight glass
SD70ACe AND SD70M-2 SPECIFIC FEATURES
Correctly-sized operating ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or -tube- style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Standard grille or Canadian-style -louver- dynamic brake intakes
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Different jacking pads
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
New version HTCR or HTSC trucks
Non-sound QuickPlug equipped with NMRA 8-pin and 9-pin DCC plugs
McHenry scale knuckle spring couplers
Minimum radius: 18inch
Recommended radius: 22inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
60ft ACF Auto Parts SD Box Car Canadian National
MODEL FEATURES:
- 70-ton roller-bearing trucks with blackened metal wheels and adjustable screws
- Authentically painted and lettered detailed body with sliding doors and distinctive “Precision Design†recessed panels
- Prototypically designed roof and ends with full rivet detail
-Detailed die-cast metal underframe for improved operation
-Separate brake system and air reservoir
- Cushion underframe with extended coupler pockets
-Accurate painting and printing
- AccuMate operating knuckle couplers with mounting screws
- Roof overspray
HO Shell Service Station (1935-1960) - Gas Stations - Decals
Circa: 1935-60
Scale: HO Scale
Equipment Type: Gas Station
Description: Shell Service Station (1935-1960) - Gas Stations - Shell - Waterslide Decal
HO Bi-Level Auto Rack - Conrail/TTGX Flat Car #157314
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO H-6-G - DCC & Sound - Canadian National Railway (Straight Wafer) #1371
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO General Contractors Building - Kit
These Kit-basher Series kits are built up from individual components from several of our existing Pikestuff kits. We have done the kit bashing for you by providing you with the parts and instructions to build a unique building from the Pikestuff inventory. These kits require some cutting of the soft plastic. Some cut lines are not provided, but cutting is easy and the instructions will guide you through each step along the way.
Dimensions: 40 X 60 Scale Feet / 5-1/2 X 8-1/2 Inches
60ft Pullman-Standard Flatcar - Ready to Run -- Alaska Railroad
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
N Scale J. Franks Grocery - Built & Ready Landmark Structures - Assembled
Product Information
Modeled after the independently owned grocery stores that began sprouting up in the early 1900s and that can still be seen today in cities and small towns throughout America. Details and accessories include loading dock with dolly, large display windows, awnings, kiddie ride and more. The building features window treatments and you can add lighting to accentuate the included printed interior.
HO GE Dash 9-40CW - DC/DCC Ready - Norfolk Southern NS #9806
NS FEATURES:
Front and rear ditch lights (Alternately flash in DCC mode)
High-mounted head light and number boards
K5 horn
Electronic brakes
Graham White Electronic bell
Delivered new in 2003 from GE, NS took delivery of class 9745-9811 Dash 9-40CW locomotives. Some unique features include: electronic bell, high mounted headlight, and electronic parking brake. We are offering both versions of the front cab schemes to choose from!
ROAD NUMBER SPECIFIC FEATURES:
#9754 -White face- scheme
#9773 -Unibrow- scheme
#9806 -Unibrow- scheme
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO RTR ACF 4650 3-Bay Hopper - SOO Line #74224
Date: BLT 11-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO Scenics Accents - Dock Workers (6pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail!
Includes six dock workers, two crates, and one pallet. One dock worker is holding up his hand to signify stopping an operation. One is opening a crate, one is dragging a pallet, two are carrying a crate and another is looking up, surveying a project.
HO F30D 50Ft TOFC Flat Car w/ Trailer - Pennsylvania PRR (Delivery) #475303
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
HO scale CIMC 53Ft Cargo Container Marten Set #1
53Ft CIMC Features:
-Side corrugations with an 8-55-8 arrangement
-Front wall with 10 vertical corrugations
-Roof with 6-54-6 corrugations
-1-3-1 beveled doors
-Placard Holders on front wall, sides and door
HO Grocery Distributor - Kit
Product Information
If your railroad needs more business, youll find plenty of fast-paced operations surrounding the Grocery Distributor! Switch crews will always have work near this Walthers Cornerstone warehouse as freight cars arrive and are unloaded quickly. Its perfect for simulating loads in-empties out traffic on any line.
This unique structure can be a brand-new building on a transition-era layout, or an older structure in a modern scene. It fits any industrial area and is a natural addition among waterfront buildings and scenery. An angled corner allows the building to be placed between closely spaced sidings or on an odd-shaped lot. The Grocery Distributor features separate rail and truck docks with canopies, rooftop office addition and colorful decal signs are all included.
The Grocery Distributor is just one of a wide variety of Cornerstone industrial buildings.
Realistic brick walls
Fits steam and diesel-era layouts
Decal signs for traditional or organic food distributor
Canopied truck and railcar loading docks
Angled corner perfect for tight spaces
Easy-to-build plastic kit
Molded in appropriate colors
N Scale PS 4427 Covered Hopper - B&O #602923
MODEL FEATURES:
- Body-mounted McHenry knuckle spring couplers installed
- Screw mounted trucks for accurate tracking
- Roller bearing trucks
- 36 inch machined metal wheels and RP25 contours
- Operates on Code 55 and 80 rail
- Weighted for optimum performance
- Packed in a jewel box for great display and storage opportunities
- Razor sharp painting and printing
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
Vallejo 73826 - Model Wash - Weathering FX - Mud and Grass - 40mL Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Blue Grey is recommended for vehicles with a Panzer Grey base color, as well as all vehicles with a similar grey base.
N Scale Laser-Cut 2-Lane Curved Wood Grade Crossing - 14-16in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights.
HO Trenton Works 6348 CN Boxcar - Canadian National (Website) #598035
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
HO Lightweight Coach - Central of New Jersey #330
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
Red- (colour of light)
Simply plug into Light Hub, sold separately. 24AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug
HO 19,600 Gallon Tank Car - Cerestar (NATX) #190190
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Built: BLT 11-99
HO Modern 50Ft Highway Overpass - with Pier
The Rix Modern Highway Overpass for HO scales is modeled after the bridges built today to span over railroad tracks. This style of bridge is typical of most new construction and is used all over the country. The Rix Modern Highway Overpass consist of 50 foot spans which interlock together so that any length bridge can be built. The piers are designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy.
Aerosol Spray Paint Can - Boxcar Brown Spray - 4.5oz (135mL)
Product Information
Tru-Color Aerosol Spray Paint is ideal for painting any model when you dont have an airbrush. This solvent-based acrylic paint is great for weathering and wide-are coverage. Available in railroad and weathering colors, Tru-Color spray paint comes in spray cans as well as in liquid colors designed for brush or airbrushing. Check out the entire line of aerosol sprays and bottled paints from Tru-Color.
Alco RS-11 Conrail 7651 DCC & Sound
ESU LokSound Installed
The Rapido HO Scale RS-11 model features:
•Correct hood and roof profiles 3D scanned from the prototype
•Operating number boards, headlights and green and white class lights and cab control stand lighting
•Rapido innovative dead straight metal side handrails with plastic stanchions
•Roadname-specific details including steps, lights, equipment boxes, handrails, fuel tanks, air intake louvers and more!
•Full underbody piping, conduits and steam lines, where appropriate
•Correct roadname-specific corner steps
•Separate grab irons and wire handrails installed at the factory
•Heavy, die-cast chassis and full, multi-colour/color interior
•Rapido proven 5-pole skew-wound motor with dual flywheels and silky-smooth drive
•DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound)
•Accurate sounds recorded from a real Alco 251B prime mover
•Factory-installed Macdonald-Cartier couplers mounted at the correct height
HO TM High-Cube Container - ESIU, Set #1
Contains Numbers: 10009, 10027, 10034, 10046
MASTER MODEL FEATURES:
Prototypical paint schemes
Simulated forklift pockets
Detailed chain securement
Fire port on one side
HO 10 Inch Track Alignment Gauges - Curved - 24 Inch Radius
RibbonRail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking, and joining rail. Track Alignment Gauges are precision machined to NMRA standards and will work on any code of HO Scale rail. Available in many curve radii as well as straight.
HO 12Ft FMC 5327 Plug Door Box - QGRY #77115
All new tooling with accurate dimensions
Photo-etched cross-over platform
Separately applied grab irons, end ladders and brake wheel
33in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
All models are representative of prototypical paint schemes
Minimum radius: 18in
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of ?In Service? equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
PROTOTYPE AND BACKGROUND INFO:
It was the mid 1970s, and the incentive per diem box car boom was just beginning. New, brightly painted box cars seemed to appear overnight. Many were lettered for various short lines. FMC (Food Machinery Corporation) was a significant builder of many of these cars. The 50? outside post, non-terminating end box car, became the foundation for new per diem cars built in the 1970s. The 50? FMC cars also varied in door configuration and style to better suit each customer. These models can still be seen today in the modern railroading scene.
HO NSC 60ft Ingot Flat Car - HPJX National Steel Car
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Conrail Rack / Trailer-Train Flatcar TTBX #964335
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO GP9 DCC Ready - Toronto, Hamilton, & Buffalo #403
ERA: Early 1960-1970s
THB FEATURES:
-Steam Generator Intake & Exhaust
-Long hood nose mounted bell
-Separate ACI plates included
-Roof mounted air tanks
TH&Bs 3 steam generator equipped GP9s began service in 1954 and effectively vanquished steam on this small Canadian railroad. Their time in passenger service was relatively short and they served out their time in freight service all the way into the CP Rail era.
LOCOMOTIVE FEATURES:
-Trainline and MU hoses
-Coupler cut levers
-Drop steps unless noted
-MU stands
-Nub style walkway tread
-Bell placement & type per prototype
-Fine-scale handrails for scale appearance
-Wire grab irons
-Lift rings
-Windshield wipers
-See-through cab windows and full cab interior
-Etched metal radiator intake grilles and fan grilles
-Air tanks mounted below sill unless noted
-Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
-Blomberg-B trucks with appropriate bearing caps
-Sander lines
-Speed recorder unless noted
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately-painted and printed paint schemes
-Body-mounted McHenry operating scale knuckle couplers
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
-All-wheel drive with precision gears for smooth and quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-Bidirectional constant LED lighting so headlight brightness remains constant
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds the model for safe storage
-Replacement parts available
-Minimum radius: 18in
SOUND EQUPPED MODELS ALSO FEATURE
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
60ft Pullman-Standard Flatcar - Ready to Run -- Alaska Railroad
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
N Scenic Accent Figures - Train Mechanics (7pcs)
A set of six train mechanics and a tool box.
HO RTR SW1500 Switcher - DCC & Sound - Conrail #9614
ETA: January 2023
Detailed Information
SSW FEATURES:
SP-style lighting package with -head knocker- style Gyralight fixtures
P-3 horn
Flexicoil trucks
As-delivered configuration with footboard pilots, pilot face grab irons, early cut levers and corner frame gussets
1,100 gallon fuel tank
Full cab interior
In the first half of 1968 the Cotton Belt received their first SW1500s and they came with all the features of their SP counterparts of that era.
SW 1500 LOCOMOTIVE FEATURES:
Detailed cab interior
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Drop steps unless noted
MU stands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Exhaust stacks
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
Printed numberboards
Fine scale handrails
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
53ft Wabash Plate Trailer - Schneider #F45555
MODEL FEATURES:
Separately applied tractor-trailer, landing gear assembly, and mud flaps
Sliding rear bogie
Two or five hole painted wheels
Rubber tires
Sand shoes applied with removable glue
New tooling
Fully-assembled and ready to use out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
PRIMED FOR GRIME MODELS FEATURE:
-Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
-Patches applied and shaped per road number matching each corresponding side to the prototype
-Duplicated look and feel of In Service equipment - Tattered and Torn just like the real thing
-Some Prime for Grime models feature paint scheme variations
PROTOTYPE HISTORY:
Once the US Department of Transportation declaring that all national networks (US and Interstate highways) and all other networks within ten miles must allow the operation of 53-foot semitrailers without requiring special permits for length, the industry was quick to adopt the now-ubiquitous 53-foot vans. One of the first 53ft vans was the Wabash Plate Trailer in the late 1990s.
HO Gunderson 6276 50Ft Plate F Boxcar - Illinois Central IC #21061
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
HO Mountain Lumber Company Sawmill - Kit
Product Information
Whether set in the days when Shays and Heislers ruled the forests, or served by contemporary diesels and trucks, the Walthers Cornerstone Mountain Lumber Company sawmill can be the centerpiece of any logging operation. Everything you will need to start work is included, from the log conveyor to the burner. The mill building is enclosed with board and batten siding and covered with a corrugated metal roof. This style is typical of permanent operations or those that ran in areas where the weather could turn cold. At the back is a canopied area, where fresh-cut boards are sorted. To keep the machinery running, theres a nicely detailed powerhouse with twin smokestacks. And for the final touch, you get a sawdust burner, used to dispose of scrap lumber and sawdust from the cutting operations. Typical of buildings constructed from the 1920s to the 1940s and still in use today, the Mountain Lumber Company model fits easily into steam- or diesel-era layouts.
Includes main mill, log conveyor, powerhouse and sawdust burner
Realistic wood-textured walls and canopied sorting area on main mill
Fits steam and diesel-era layouts
Printed signs
Easy-to-build plastic kit
Molded in appropriate colors
Main Building: 13 x 16 x 5-3/4inch (32.5 x 40 x14.3cm)
Log Conveyor: 3 x 21inch (7.5 x 52.5cm)
Powerhouse: 4-1/8 x 4-3/8 x 4-1/2inch (10.3 x 10.9 x 11.2cm)
Sawdust Burner: 3-7/8inch (9.6cm)
Diameter x 4-1/4inch (10.6cm) Tall
Retractable Knife Set
Knife with #11 blade in handle and five additional #11 blades.
N Scale Flexi Flo Hopper (Early) - FMC Chemicals SHPX - 3-pack
Road Numbers Include:
#76002
#76004
#76005
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
Bob Smith Industries Insta-Set 2fl.oz. spray
Accelerator
Foam safe
compatible with plastic and foam
for all CS glues
HO Bi-Level Auto Rack - Transportación Ferroviaria Mexicana (TFM)/TTGX Flat Car #995949
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
N Scale Code 55 Streamline Electrofrog #8 Turnout - Long 36inch Radius - Right Hand Turnout
Product Information
12inch radius diverging route.
Peco Universal Fine track has a fine scale appearance. Rail is Code 55 above the ties, but the clever double base adds strength and maintains compatibility with Peco Code 80 track system components. Code 55 turnouts are not direct replacements for Code 80 components as the geometry is slightly different. Turnouts include extra tie sections for placement under the rails once the track has been fitted onto the layout.
Peco Electrofrog turnouts feature electrically live frogs to enhance slow-speed performance. They require that power always be fed from the points end of the turnout.
All Peco turnouts are power-routing, meaning that only the route the points are lined for are electrically live. Turnouts feature realistic ties and guard rail details. Sprung points ensure positive contact each time the switch is thrown. Turnouts can be motorized using the Peco PL10 Turnout Motor #552-3010.
HO Scale G2 AC4400CW - DCC & Sound - CEFX #1048
Detailed Information
CEFX FEATURES:
Nathan K-3 Horn
Late body features
Late radiator lift rings
Evenly spaced rear grab irons
Engine air intake moved rearward
Notched fuel tank
Tank welded to underframe
Long handrail on left jogs over capacitor box
Double rail behind cab on left side
AAR style control stand
Electric air dryer
GE Hi-Adhesion trucks
Outside struts on opposite sides of trucks
Front ditch lights
The CIT Group placed two orders late in the production of the AC4400CW. They represent some of the newest features added to the AC4400CW line before its discontinuation. The first group was purposely built with Union Pacific features to whom they were originally leased. The second group was leased to the Canadian Pacific and share spotting features with late model CP AC4400CWs. Both wear CIT Groups distinctive -Blueberry- scheme with CEFX reporting marks.
ROAD NUMBER SPECIFIC FEATURES:
#1002
GPS Dome
High number boards
#1020
GPS Dome
High number boards
#1048
Sinclair Antenna package
Low number boards
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140092
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scenic Accents(R) Figures --Canoers 4pk
HO 59Ft Cylindrical Hopper - Scoular SCOX #1543
(yellow, brown, green; Double-Corn Logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
One time run of these roadnumbers, order now - limited quantity available
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) #652954
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO RTR 68Ft Bulkhead Flatcar - Trailer Train TTPX #82115
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
Brown Earth Deposits
The perfect product to recreate accumulated dust and dirt on your model. This Sand Yellow enamel product is perfectly suitable for vehicles operating in a desert environment or any light soil area. The finish is extremely authentic.
All Scale Classic Trees - Ready Made - Blue Needle 3-1/2 - 5-1/2 inch (4pkg)
Make Realistic Scenery in Minutes!!
Give your layout a change of scenery with Woodland Classic Trees from Woodland Scenics. Fully assembled and ideal for foreground detail, the selection includes several types of trees along with hedgerows. The models are finely detailed with painted, flexible trunks and foliage with natural contrast to enhance any layout or diorama. A unique planting pin and detachable base allow for temporary placement, or ease of removal for cleaning and maintenance. Easily mixed and matched to capture the variety found in nature, trees range from 3/4 to 9inch tall, making them ideal for modelers in all popular scales.
Evergreen Scale Models - Opaque White Polystyrene Quarter Round .10In x 14In (3 pcs pkg)
HO NSC 3800 Covered Hopper - TH&B (Delivery Scheme) #1547
They are back, again! The famous Rapido 3800 cu.ft. Cylindrical Hoppers make a triumphant ~THIRD~ return with new road numbers and paint schemes!
FEATURES INCLUDE:
- Round-hatch or Trough-hatch design
- Correct Dofasco S-2 100-ton trucks
- Two body variations with 6- or 11-side panels
- Three brake equipment variations and optional additional air reservoir on NSC cars (if applicable)
- Etched running boards and brake crossover platform
- Factory-installed air pipes and coupler cut levers
- Finely molded plastic walkway supports and end cages
- Full separate air piping and brake equipment details
Plastruct 90005 Angle ABS 3/16
HO Evans 53Ft Double Plug-Door Boxcar - British Columbia #800417
Features:
70-ton roller-bearing trucks
Blackened metal wheels
Two-piece underframe
Separate brake cylinder
Air reservoir
End platforms
AccuMate couplers
AccuMate couplers are made under license from AccuRail, Inc.
HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (Sand) #7021
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Bathtub Coal Gondola - DREX (ex-Procor) #104015
Built: 5-05
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
1:87 1980 Flxible 53102 Transit Bus, SEPTA Philadelphia
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Early CWSX (6 pkg) #2
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
140028
140047
140053
140054
140066
140085
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Value Line RTR - 13 Panel Coalporter - NYC (Conrail Quality) #505779
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52R class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO 50ft PS 5277 Cu.Ft. Exterior Post Boxcar - GTW #309321
FEATURES:
- Laser Sharp Painting and Printing
- 33 inch InterMountain Precision Metal Wheelsets
- Kadee #178 Metal Knuckle Couplers
Date: BLT 9-74
Minimum Radius - 22 inches
Side Mounted Turnout Motor
Recommended: 16 Volts AC at 2 Amps
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX (6 pkg) #6
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Includes Road Numbers:
21125
21173
21200
21268
21294
20299
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO RTR 48Ft Husky Stack Wellcar - GBRX #2510
Detailed Information
MODEL FEATURES - 48Ft HUSKY STACK WELL CAR:
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
48Ft well cabable of carrying 20Ft - 48Ft containers on the bottom and up to 53Ft containers on top
HO 57Ft Mechanical Reefer - Pacific Fruit Express #456332
(white, black, orange)
Product Information
Move all kinds of perishable products on your HO railroad with WalthersMainline 57Ft Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s. Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including:
One time run of these roadnumbers, order now - limited quantity available
Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
Keystone or Hydra-Cushion underframe detail as appropriate
Short ladders and low hand brakes
9Ft Youngstown plug door with separate latch bars
Authentic Stanray peaked, ribbed roof with capped exhaust stack
Detailed underbody with brake gear and fuel tanks
70-ton roller bearing trucks
Correct 33Inch RP-25 turned-metal wheelsets
Proto MAX metal knuckle couplers
N Scale Magor/PC&F 40Ft Insulated/Heated Boxcar - BAR (Great Northern Paper) #2501
Bangor and Aroostook
Great Northern Paper dedicated service
without roofwalk, without charcoal heater
Cars painted in this scheme were assigned to dedicated service for Great Northern Paper in Millinocket ME. Painted freight car red with black and white printing.
Magor/PC&F 40Ft Insulated/Heated Boxcar
In 1950, Bangor and Aroostook commissioned Magor Car Company to build 300 insulated heated plug-door boxcars for potato service. An additional 150 cars were ordered from Pacific Car & Foundry in 1953. The cars were equipped with ventilators and charcoal heaters. New Haven piggybacked an order of 100 cars with the PC&F lot and factory-decorated its cars in the State of Maine scheme to save money on the purchase. The cars carried potatos in the winter and paper products in the summer.
The model is injection molded plastic with etched brass roofwalk and brake platform. These cars ride at the prototypically-correct height above the rails, on friction-bearing trucks fitted with low-profile wheelsets. The model is equipped with body-mounted Micro-Trains #1015 couplers, Bettendorf trucks and plastic wheels, or Micro-Trains compatible knuckle couplers, Trainworx ASF A-3 trucks and Fox Valley metal wheels as specified.
Aluminum Telescopic Tube Assortment (8 pkg)
K&S Engineering Telescopic Tubing Packs are perfect for creating tapered poles, sliding parts and more. Available in 12inch long section packs, individual tubes have a .014 wall thickness and come in a range of telescoping sizes. Telescopic Tubing Packs are available in Brass, Copper and Aluminum in various size ranges.
12inch Long x .014inch thick - Aluminum
Outside Diameter: Varies from 1/16inch to 9/32inch
This package contains the following: 1/16 in., 3/32 in., 1/8 in., 5/32 in., 3/16 in., 7/32 in., 1/4 in., 9/32 in. O.D. x 0.014 in. Wall Thickness x 12 in. Length
HO Ditch Lights w/Lenses - Pilot-End Mount - GE, EMD (2pk)
SubTerrain System - Foam Risers (4in)
2/pkg - 4 x 2-1/2 x 24 inches (10.1 cm x 6.35 cm x 60.9 cm)
Risers are generally used with incline/decline starters to create varying grades on your layout. Risers are easily flexed to form curves and work on plywood or foam bases. To install, pin in place with foam nails and attach with foam tack glue or low temp foam glue gun and glue sticks.
N Scale Universal Truck Mount Couplers - Long T Shank (2 Pairs)
Description
MT-7 Long (.345inch) T shank coupler conversion. Unassembled
With adaptor; for converting Kato, Con-Cor, AHM and other equipment with split single one-piece draft gear box.
HO Metal Multi-Purpose Coupler Height Gauge
A must have tool for gauging correct coupler height, trip pin, and permanent uncoupler heights for achieving trouble free coupler performance.
Four tools in one!
1. Provides instant visual reference of proper coupler height.
2. Accurately measures proper trip pin height above rail.
3. Built-in track gauge. (N.M.R.A. Standard)
4. Movable dowel tests Kadee Magne-Matic Uncoupler height and registers the needed adjustments.
NOTE: The #205 gauge is not insulated and ONLY should be used on a nonpowered track or track with the electrical power completely switched off.
Length - 1/4 inches - colour -Black
Athearn Blue Box cars, coupler box, locomotives
HO Scale - Dry Hydrant / Standpipe Kit - pkg(8)
SceneMaster makes it easy to add this important detail to modern HO industrial areas, railroad yards, rural fire stations and more! Based on prototypes that provide a quick and convenient connection to water supplies for fire fighting, the easy-to-build kit includes parts for eight dry hydrants (also known as standpipes), complete with bases, bollards and hose connections.
HO RTR 60Ft Flatcar - SOO Line #5515
MODEL FEATURES:
Working drop ends. Gently lift up & push inward to fold ends down.
Separately applied wire grab irons
Interior detailing
Decorated models fully-assembled and ready to run out of the box
Machined metal wheels and RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Minimum radius: 18inch
HO RTR SD40T-2 - DCC Ready - Southern Pacific (SP Daylight) #8229
SP - DAYLIGHT
Legendary Liveries
SP -Daylight- ROAD NUMBER #8229 FEATURES:
In 1980 and 1982 SP experimented with a new paint scheme on SD40R 7342.
The final version of this scheme was reminiscent of the famous -Daylight- passenger trains.
Only one other unit was painted
As-Delivered features such as; L Window
Full gyralight package front and rear
Plows front and rear
Slanted style Nathan P-3 Horn
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Separately applied air tanks
See through cab windows
Welded ECAFB
Photoetch windshield wipers
LED Lighting
HTC truck sideframes
All-wheel electrical pickup
See-through dynamic brake fans
-Mushroom- nose vent on right side
Separately applied wire grab irons
Fully assembled and ready-to-run
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox speific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body
Painted and printed for realistic decoration
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for troublefree operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Replacement parts available including motor brushes
Recommended radius: 22inch
Vertical-Mount Switch Machine (5pk)
FEATURES:
- Fully assembled, servo-based unit with approximately one second throw speed
- Integrated DCC accessory decoder
- Two built-in 5A switches to power turnout frogs, signals, track blocks and more
- Self-locking mechanism for reliable positioning - servo power turns off when motion is complete
- Adjustable throw and tension from 1mm to 12mm for turnouts in any scale from Z to O
- Factory-assembled with output rod in centered position for fast & easy under benchwork mounting
- Wire in minutes with included cables
- Outputs for both single or bi-color LEDs
- Connecting cable included - easily expanded with Connecting Cable (942-112, sold separately)
- Vertical mount measures 4.1cm tall - perfect for multi-deck layouts or anywhere space is limited!
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts with this five-pack of Switch Machines! The Layout Control System is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is integrated into each switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator-control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
#1-72 Tap, #53 & 48 Drill Bits
Drill and tap standard 1-72 screw threads
O Scale Milk Cans - 6pkg
Just the thing for your country kitchen, porch decor, farm scene?
Each package contains 6 quarter inch scale milk cans
.275 (w) x .550inch (tall)
HO RTR Thrall 5-Unit Rebuilt 40Ft Well Car - Trailer-Train DTTX #740841 A-E
(yellow, Large Black & White Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft on both single and five-unit cars. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers - limited quantiuty, order now!
100- and 70-ton roller bearing trucks
Correct 36inch and 33inch RP-25 turned metal wheelsets
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
Proto MAX(TM) metal knuckle couplers
Evergreen Scale Models - Opaque White Polystyrene Z Channel .060In x 14In (4 pcs pkg)
Gunderson Multi-Max Auto Rack - CN-GTW
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
HO Scale Santa Fe Refrigerator Car -The Scout #34664
HO NSC Ballast Hopper - CSX #965545
1980s+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO SD70M - DCC Ready - Union Pacific #4477
UP FEATURES:
UP lightning stripe scheme
Early SD70M body
Nathan K-3 horn
Air Dryer
Spare knuckles on rear pilot
Prime air filters
HTCR-II trucks
EMD low plow
Red sill stripe
GPS dome
Small can & Sinclair antennas
-Under Warranty- on cab
Late style fuel tank & breather piping
This release of UP SD70Ms depicts units from the first order, with early (non-flared) SD70M bodies in their as-built appearance. For later-era operations, a consumer-applied GPS dome is included.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
Ballast - Medium Gray Blend - Shaker (57.7 in3)
Use ballast and coal for any scale to model realistic railroad track, gravel roads, crushed rock and stones, hopper loads, and coal piles. Available in several colors and sizes, you can mix and match for a superior realistic effect. Ballast and coal are lightweight and easy to use. Watch the Woodland Scenics video about how to apply it and attach with scenic cement!
ALLERGY CAUTION: Ballast contains tree nut by-products.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX 6 Pack
800, 802, 804, 805, 808, 809
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
1:87 1966 GM 4107 - Gray Coach
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Early CWSX #140066
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Slab-Side Covered Hopper - Canadian Pacific #381128
8 Hatch
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
N Scale PS 4427 Covered Hopper - The Rock ##630266
MODEL FEATURES:
- Body-mounted McHenry knuckle spring couplers installed
- Screw mounted trucks for accurate tracking
- Roller bearing trucks
- 36 inch machined metal wheels and RP25 contours
- Operates on Code 55 and 80 rail
- Weighted for optimum performance
- Packed in a jewel box for great display and storage opportunities
- Razor sharp painting and printing
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
N Old Homestead - Built & Ready Landmark Structures - Assembled
Product Information
Shes a bit rough around the edges and the prefect representation of an old rural bungalow, beautifully weathered and loaded with detail. Features include an outhouse, rusting propane tank, a couple of old barrels, a mailbox, old Bowser asleep on the front porch and more.
Measures: 2-1/32 x 2-29/32inch 5.2 x 7.4cm
JL Innovative Design 376 HO Billboard Signs - Vintage Tractors 1940s-50s pkg - 6 signs
international Harvester, Ford, Allis-Chalmers, Minneapolis-Moline
HO F89F Trailer - RTTX/Yellow #151894
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast underframe
- Wire formed brake plumbing
- Detailed deck
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Minimum radius: 22 inches
- Recommended radius: 24 inches
Plastruct 90086 ABS TEE 1/4 (4pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/4
HEIGHT IN MM
6.4mm
WIDTH IN INCHES
1/4
WIDTH IN MM
6.4mm
THICKNESS IN INCHES
.060
THICKNESSS IN MM
1.5mm
LENGTH IN INCHES
24
LENGTH IN MM
600mm
USE DESCRIPTION
ABS TEE Use for bracing in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is
N Scale 53Ft Containers - EMP (Large Side Logo) Set #2 (3 pkg)
Road Numbers: 634732, 634722, 634992
FEATURES:
Side corrugations with an 8-55-8 arrangement
Front wall with 10 vertical corrugations
Roof with 6-54-6 corrugations
1-3-1 beveled doors
Placard holders on front wall, sides and door
Each set comes as a 3-pack w/different road numbers
HO 70-Ton 12-Panel Hopper - Penn Central (H39B) #452707
Blt.9-60
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
Athearn Roundhouse HO 50ft ACF Boxcar C&NW #155193
Detailed Information
MODEL FEATURES:
70-ton Roller Bearing trucks with 33in wheels
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Body mounted McHenry operating scale knuckle couplers
Wheels with RP25 contours operate on Code 70, 75, 83, 100 rail
Minimum radius: 18in
Specifications
COUPLER STYLE: McHenry Scale Knuckle
PRR X31A Single-Door Boxcar: Circle Keystone - Single Car #69347
Detail Variations:
Built 1934-35, as operated to approx. 1954.
6-pack includes the following numbers:
#67758
#68074
#69347
#70002
#70183
#70248
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20084
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO 85Ft General American G85 Flatcar - GTTX (Yellow) #300477
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
HO 59Ft 4550 Cu. Ft. Cylindrical Covered Hopper - Round Hatch - Potash (Offset Logo) #989
National Steel Car Co. 59Ft, 4550 Cu. Ft. Cylindrical Covered Hopper - Round Hatch
The car is commonly referred to as the -Canadian grain car-. Between 1972 and 1985 almost 20,000 cars were built for the Canadian government to assist the Canadian railways in transporting vast quantities of grain. Canadian National, Canadian Pacific, and other companies own or lease this type of car.
Round Hatch cars feature 4 round roof hatches, numerous wire details, etched metal roof walks, laser sharp painting and lettering, accurate colors, 100 ton trucks with 36inch metal wheelsets, and metal knuckle couplers.
Burlington Northern Santa Fe, Faded H1 #7724
NEW FEATURES:
•All-new LED lighting
•Rubber MU hoses for durability
BNSF FEATURES:
•Heritage II painted units with faded paint to depict in-service appearance
•Short front snowplow
•Nose door window
•High number boards
•4-window cab side windows
•Desktop control stand
•Sunshades
•Salem air filter
•Electronic parking brake
•Hi-adhesion trucks
•High rear sand filler
•Low rear vertical headlight
#7795:
•dog’s breakfast hood doors unique decoration on each side with primer-painted doors and replacement doors from a Heritage II painted unit
LOCOMOTIVE FEATURES:
•Illuminated ditch lights
•Low or high front headlight per prototype
•Tinted cab windows
•Large antenna dome
•Small GPS dome
•See through dynamic brake intakes
•Two dynamic brake exhaust vents with wide spacing and flush housing
•Short auxiliary cab rear left-side doors
•Right side forward electrical cabinet with X-Panel
•Nathan K5HL horn
•Engine compartment side grab irons
•Flush radiator compartment doors
•Hand brake panel grille
•Flush heat exchanger housing and top radiator grilles
•5000-gallon fuel tank
•Era: 2005+
•Minimum radius: 18 in
•Recommended radius: 22 in
GENESIS DIESEL LOCOMOTIVE FEATURES:
•Fully-assembled and ready-to-run
•DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
•Scaled from prototype resources including drawings, field measurements, photographs, and more
•Accurately-painted and –printed paint schemes
•Coupler cut levers
•MU hoses
•Trainline hose
•See through cab windows
•Full cab interior
•Walkway tread
•Fine-scale Celcon handrails for scale appearance
•Windshield wipers
•Lift rings
•Wire grab irons
•Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
•Sander lines
•McHenry scale knuckle couplers - Kadee compatible
•Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
•All-wheel drive with precision gears for smooth and quiet operation
•All-wheel electrical pickup provides reliable current flow
•Wheels with RP25 contours operate on all popular brands of track
•LED Lighting for trouble free operation
•Heavy die-cast frame for greater traction and more pulling power
•Packaging securely holds for the model for safe storage
•Replacement parts available
SOUND EQUIPPED MODELS ALSO FEATURE:
•Onboard DCC decoder with SoundTraxx Tsunami2 sound
•Sound units operate in both DC and DCC
•Full DCC functions available when operated in DCC mode
•Engine, horn, and bell sounds work in DC
•All functions NMRA compatible in DCC mode
•Excellent Slow speed control
•Operating lighting functions with F5 and/or F6
•Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
•Many functions can be altered via Configuration Value (CV) changes
•CV chart included
Woodland Scenics 510 Roman Numbers White Dry Transfer Decals
N Scale FM H-24-66 Phase 2 Trainmaster - Silver Standard DC - Canadian Pacific (Late) #8913
Features:
Ends with large number boards and a single headlight
Golden-white LEDs
Directional lighting
Painted safety rails
Etched metal grilles
Blackened metal wheels
Factory-installed AccuMate magnetic knuckle couplers
Atlas Master Series Silver Additional Features:
Atlas Silver Sound Ready models are equipped with a speaker for easy conversion to sound with the addition of a decoder.
AccuMate couplers are made under license from AccuRail, Inc
SCB Interconnect Cable Connector - All Scales Signal System
Evergreen Scale Models 4101 .100in Opaque White Polystyrene Clapboard Siding (1sheet)
Damp Earth Satin Wash Enamel Paint - 35ml Bottle
Walthers SceneMaster All Scale - Tear and Plant Bushes - Dark Green
Measures 7-7/8In x 9In 20 x 23cm
Product Information
SceneMaster ready-to-use Tear and Plant products are perfect for adding grass in large areas. Available in a variety of styles and seasonal colors to add realistic vegetation to any layout from Z to G Scale, ready-to-use mats are flexible to fit uneven terrain and are easily cut or torn to fit available space. Use Tear and Plant Grass Mats along with other SceneMaster scenery materials to add realism to your layout!
Realistic plants in minutes - requires no special skills!
Easily cut or torn into smaller pieces or to fit available space
Great for adding a realistic variety of plants to any area
Flexible for easy use on uneven terrain
Ready to use
Varied colors and flocking for added realism
Flexible transparent base blends into existing scenery
HO FM H-24-66 Train Master Phase 2 - Silver DCC Ready - CP Rail #8917
Separately-applied door handles
Real metal springs on trucks
Realistic die-cast underframe
Five-pole skewed armature motor with dual-flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate? couplers
Painted crew figures
Separately-installed fine scale handrails
Etched metal radiator grilles
Electronic Dual-Mode Decoder (e-DMD) (Gold Series only) that allows your locomotive to run in DCC or DC
NMRA 8-pin plug for DCC (Silver Series only)
Railroad specific details (Lighted classification lights on some models
Atlas Master? Series Silver Additional Features:
NMRA 21-pin plug for DCC (Decoder-ready)
Sound Features for Gold Series :
(DCC Operation)
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F31 .
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes ?on the fly? are provided for true realism.
AccuMate? couplers are made under license from AccuRail, Inc.
Silver Sound Ready
HO 40ft Hi-Cube Container w/Flat Roof - Yang Ming
(gray, red, blue)
FEATURES:
- Based on common size & style in service worldwide
- Improved door latch detail
- Great detail for terminals and industrial scenes
- Realistic loads for any well car
- Ready to use
HO RTR SD40T-2 - DCC & Sound - Ohio Central #4025
OHCR FEATURES:
Ex SP
Welded/removed gyralight nose
Modified L window cab
Unique rear stripe art per road number
ROAD NUMBER #4025 FEATURES:
Standard ditchlights
Large plow
Removed/plated a/c
Body mounted K-5 horn
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Separately applied air tanks
See through cab windows
Welded ECAFB
Photoetch windshield wipers
LED Lighting
HTC truck sideframes
All-wheel electrical pickup
See-through dynamic brake fans
-Mushroom- nose vent on right side
Separately applied wire grab irons
Fully assembled and ready-to-run
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox speific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body
Painted and printed for realistic decoration
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for troublefree operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Replacement parts available including motor brushes
Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard Econami Sound by SoundTraxx
Sound units operate in both DC and DCC
Sound units operate in both DC and DCC
All functions NMRA compatible in DCC mode
Full DCC functions available when operated in DCC mode
Some functions are limited in DC
Engine, horn, and bell sounds work in DC
Slow speed control
All functions NMRA compatible in DCC mode
CV chart included in the box
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO Hardwood Furniture Company - Kit
Product Information
At the Walthers Cornerstone Hardwood Furniture Company boxcar doors slide open. Ramps clang into place from the loading dock. Strong backs bend to their task as the first crates are carried out of the warehouse and into the car. Tucked into the cramped quarters of the industrial district, the Hardwood Furniture Company is the kind of industry that every layout needs. Its big enough to look right, small enough to fit and packed with realism. Check out the authentic architectural trim molded on each wall or the over 50 separate windows! Theres a covered loading dock for boxcars and roll-up doors for trucks. Up on the roof, a water tank, elevator house and chimney are included to detail this important area. Complete instructions and colorful signs round out the kit. Plus, modelers who desire to make the Hardwood Furniture Company a larger building will find its easy to expand with some minor kitbashing.
Realistic concrete walls
Recessed loading dock and tunnel on the first floor
Signs for several businesses
Molded in appropriate colors
Easy-to-build plastic kit
HO Alco FA-1 - DCC & Sound - Canadian Pacific (Block Scheme) #4008
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO Metal Building Extension Kit - Red
Pikestuff Extension Kit (Red) Extends the length of most Pikestuff Kits. The walls are 20 scale feet wide (2-3/4 inches) by 23 scale feet tall (3-11/64 inches).
Make virtually any of the modern metal buildings larger. Includes two wall sections molded in color, plus white roof and other details.
HO Sanding Towers & Drying House - Kit
FEATURES:
- Brick drying house
- Detailed wooden storage bin
- Early and late-style towers included
- Realistic piping
- Great for steam or diesel-era layouts
- Decal signs included
- Easy-to-build plastic kit
MEASUREMENTS:
Early Sanding Tower: 1-7/8 x 7/8 x 2-7/8 inches
Late Sanding Tower: 3-1/2 x 3/4 x 4-7/32 inches
Drying House: 1-11/16 x 1-13/16 inches
Storage Bin: 1-11/16 x 3-1/2 inches
HO New Look Bus - SEMTA (Detroit) - 410 Birmingham via Southfield - Deluxe #1539
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
HO ICC B&O I-18 Steel Bay Window Caboose - Chessie System (B&O 1982+) #903045
Product: ICC B&O I-18 Steel Bay Window Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Gould Caboose Roller Bearing
Wheels: CNC-Machined 33inch Wheels
DC/DCC Lighting Features: Interior lights, -Box- marker lamps and Red FRA flashing end light
Chessie System (B&O) (1982+) offers a pair of later Chessie era cabooses. These two I-18 examples are wearing their 1973 Chessie paint jobs but include feature updates to the details matching the prototypes 1982+ appearances. Both numbers are slightly different! Caboose 903014 features a slightly weathered Chessie yellow to represent 9 years of fading, and fresh yellow bay window patches from its renumbering to the 6-digit Chessie caboose series. Car 903045 has a similar bay window patches, and also features fresh yellow marker light paint patch areas. Both cabooses exhibit the details of Chessie cabooses that made it to 1982: Updated toilet retention tanks, Chessie -box- style markers, ACI plate removal, COTS and Inspection interval lettering, and of course the FRA red end lights. Lighting features include prototypically dim interior lights, lit box markers, and red flashing end lights.
HO EMD SW9 - DCC & Sound - Union Pacific (UP As Delivered Slogan) #1826
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Union Pacific:
Features the as-delivered slogans -DEPENDABLE TRANSPORTATION- on the right hand side of the cab, and -SERVES ALL THE WEST- on the left hand side of the cab.
Delivered in 1953
Optional -beehive- style spark arrestors with short stacks in polybag
Carbody style handrails
Extra tall -safety end rails- on the cab end
Reflectolite flashing warning light
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Milwaukee Road Rack / Trailer-Train Flatcar TTBX #941656
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
N Scale Wall Mounted Billboards - Kit (3pkg)
Product Information
Add color and variety along busy streets with these billboards, designed to mount directly on buildings! Features of this SceneMaster kit include:
Newly tooled kit!
Realistic detail for businesses, industry and other structures on busy streets
Fits 1920s to present
Parts to build three complete billboards
Colorful printed signs - see Walthers website to see variety included
Easy to assemble and install on Cornerstone(R) and other structures new or old
HO 53ft CIMC Container Set, UPSU
Road numbers:601719,601784,602098
Prototype Information:
Contemporary domestic intermodal operations are based on the 53ft long dry-van container. Atlas Model now introduces an entirely different 53ft steel-bodied container in HO scale, the CIMC 53. Present operators include Norfolk Southern, Union Pacific and the recent UMAX.
Features:
Side corrugations with an 8-55-8 arrangement
Front wall with 10 vertical corrugations
Roof with 6-54-6 corrugations
1-3-1 beveled doors
Placard Holders on front wall, sides and door
Each road name comes with three road numbers per pack.
Evergreen Scale Models - Opaque White Polystyrene Channel .060In x 14In (4 pcs pkg)
HO SD70ACU - DCC & Sound - Norfolk Southern #7300
ETA: October 2023
Detailed Information:
NS FEATURES:
Nathan 5-chime horn
Large plow
Alternating flash ditch lights on both ends (Function in DCC)
In 2016, NS started an ambitious rebuild using ex UP SD9043MACs as cores. The rebuild included upgraded computers and electronic brakes, engine and main generator overall, and new EMD cab. NS designated them as SD70ACUs.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Evergreen Scale Models 9100 - .100in Plain Opaque White Polystyrene Sheet (1 Sheet)
6in x 12in SHEET
Evergreen Scale Models 4504 - 1/6in x 1/6in Opaque White Polystyrene Square Tile (1sheet)
HO EMD GP7R - DCC & Sound - Chicago & North Western CNW #4140
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
CNW FEATURES:
NEW! Non-Dynamic with roof access hatches
1700-gallon fuel tank
Partial skirting above fuel tank
All-weather firemans side window
Flashing xenon strobe (in DCC mode only)
Wheel bearings per prototype
Era: 1982+
Era: 1993+
Era: 1982+
Chicago & North Western-
-Union Pacific Licensed Product
These Ex-CRI&P units were purchased by C&NW second-hand from Precision National in 1981, serving the railroad in a variety of service for the next 15+ years. 4160 became inoperable in 1998. In 2007 it was moved to the Illinois Railway Museum and repainted into the blue and white Rock Island paint scheme.
ROAD NUMBER SPECIFIC FEATURES:
#4140 Phase III body, 5-Chime Horn, Firecracker antenna, Front snowplow
#4160 Phase II body with 86inch Doors, 3-Chime Horn, Spark arrestors, Front snowplow
#4193 Phase II body with 86inch Doors, 5-Chime Horn, Front snowplow
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO SP C-40-3 Steel Cupola Caboose - Southern Pacific (Serif with Underline) #1183
1946+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
HO 59Ft Cylindrical Hopper - Canadian Wheat Board CNWX #106614
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
One time run of these roadnumbers, order now - limited quantity available
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Selling Christmas Trees (5 Figures & 3 Trees)
Universal (Fine Kerf) Razor Saw - 32 TPI
A good all purpose saw. .022inch thick blade, 6-1/2inch long, 1-3/16inch cutting depth.
HO 59Ft 4550 Cu. Ft. Cylindrical Covered Hopper - Trough Hatch - Santa Fe (ex-Koppel) #317628
National Steel Car Co. 59Ft, 4550 Cu. Ft. Cylindrical Covered Hopper - Trough Hatch
The car is commonly referred to as the -Canadian grain car-. Between 1972 and 1985 almost 20,000 cars were built for the Canadian government to assist the Canadian railways in transporting vast quantities of grain. Canadian National, Canadian Pacific, and other companies own or lease this type of car.
The trough hatch cars feature road name specific parallel ribbed roof hatches, diagonal ribbed -zig-zag- roof hatches, or smooth flat hatches as per the prototype. All cars feature numerous wire details, etched metal roof walks, laser sharp painting and lettering, accurate colors, 100 ton trucks with 36inch metal wheelsets, and metal knuckle couplers.
4 per Package
Athearn board is designed specifically for using 1.5 volt bulbs
Grit & Grime Weathering Powder Set - 1 Grimy Black, Dark Earth and Rusty Brown
Spray Can - Park Green (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Kansas City-Style Post-War PCC Streetcar - DCC & Sound - SEPTA (Ex-Toronto) #2245
Maroon/Cream
Sign: 60 35 Allegheny
N Scale 50Ft NACC Box - Delaware & Hudson D&H #28033
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
EMD GP9 Phase II, High Short Hood - Standard DC - Soo Line #414
(white, red, black)
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today.
Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21-pin DCC plug
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
Based on units in service from the 1960s to 1980s with:
Leslie S-2M and single chime air horns
Firecracker radio antenna
Working Pyle-National beacon
Short-hood forward operation
Pyle late dual sealed beam headlights
Super non-lifting type spark arrestors
Winterization hatch
Atlas Seven Step-by-Step HO Railroads
Seven Step-by-Step HO Railroads from Atlas will show you, step-by-step, how to build the HO Scale layout of your choice. Includes tips on benchwork, track laying, wiring and scenery. All skill levels
Check out
Atlas HO layouts for every space 150-11 for detailed information on various track sizes for unusual spaces. Intermediate to Skilled level
and
Atlas Complete Wiring 150-12 for all your wiring information, suitable for all scales and all skill levels
HO Alphabets - Railroad Roman - Silver - Waterslide Decals
HO Merchants Row VII - Kit
DIMENSIONS:
10-1/2 x 6-7/8 x 5-3/8 inches (26.6 x 15.5 x 13.6cm)
FEATURES:
- New Left-corner block with 3 different stores
- Modernized facades and entrances
- Fits late 1940s to the present
- Full-color 1950s-1960s vintage signs for different businesses
- Great addition to big city or small town business districts
- Separate back porch, downspouts and stairway
- Easily mix and match with other Merchants Row kits (each sold separately) to create a custom business district
- Molded in four colors and clear plastic
60 Ft Water/Oil tank flat top kit
60 foot tall by 24 foot in diameter riveted steel tank with flat top.
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.188 (8pcs pkg)
HO UAC TurboTrain Completion Pack: CN Rail
#203-226-251 + IC-34 #261
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model.
HO Trackside Junk Piles - Unpainted Metal
HO 53ft GSC Bulkhead Flatcar - Northern Pacific #67104
FEATURES:
- One-time run of these car numbers, limited quantity available, order now!
- Now with die cast metal body for excellent performance empty or loaded
- Limited-edition - one-time run of these car numbers!
- Prototypes in service from 1950s to early 2000s - some in work train service today
- Used to carry lumber, utility poles, pipe, steel shapes, rail and various building materials
- Fully assembled with finely detailed body, deck and bulkheads
- Correct 33 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Plastruct 90362 ABS 1-1.25 in Strip Stock Light Grey (4pcs pkg)
Specifications :
Width: Inches 1-1/4 (31.8mm)
Thickness: Inches .030 (0.8mm)
Plastruct Product Number: 90362
HO Bi-Level Auto Rack - Conrail/TTGX Flat Car #159560
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO 50ft NACC Boxcar - Alumax #50187
MODEL FEATURES:
- Three road numbers
- Applied metal grab irons and etched end platforms
- Pullman Standard or Superior plug doors
- Pullman Standard or Stanray (Superior) roof (to match prototype)
- Ready-To-Roll 70 ton trucks
- Machined 33 inch metal wheels with RP25 contours
- Body mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Minimum radius: 18 inches
Gone Bust Block - Kit
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
HO Village Pizza - Kit
Product Information
Village Pizza is part of the selection of Walthers Cornerstone brick storefront building kits patterned after those youll find in towns across the continent.
Main Street hasnt changed much over the years and brick structures like this pizza place are built to last. Buildings tell a lot about your layout, especially in a business district adorned with colorful signs that set the time and place. Village Pizza combines a restaurant on the first floor and apartments or offices on the second floor - typical of buildings constructed in the late 1800s through the 1930s and still in use today. Personalize your model with paint from your dealer, and add the finishing touch with the colorful signs in this easy-to-build kit.
The finished kit measures: 3-1/8 x 5-1/2 x 4-3/4inch (7.9 x 13.9 x 12cm)
Check out the entire selection of Cornerstone businesses.
Two story brick corner structure
Fits 1880s to present
Perfect for small town or big city
Use with other Cornerstone commercial storefronts (sold separately) to create a business district
Works with Cornerstone Street System
Colorful printed signs, window treatments and awning
Molded in appropriate colors
HO 85ft ACF Dome Lounge Coach w/lights - Union Pacific (Walter Dean) #9005
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
As UP transformed its Streamliners into Domeliners in 1955, 15 new Dome-Lounge Observations were delivered to bring up the rear of the flagship streamliners. Within a year however this proved to be a problem. The cars quickly lost their unique ends and were rebuilt as Dome-Lounges. Named for the famed UP-SP-CNW Streamliner, the prototype has its original windows and lighting for use at the end of the train.
Decoder Buddy w/LokSound - Version 5
Dimensions:
Width: O.67in
Length: 2.20in
Height: 0.35in
(17 mm x 56 mm x 9 mm)
Height may vary slightly
depending on decoder.
Plastruct 91862 Blue Snowflake Square Tile Paper Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
Acrylic Flat Colors - Field Blue - 3/4oz (23mL) Bottle
XF-50
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO GRS SA Signal Head
This GRS SA signal head kit contains pewter, resin and brass parts and detailed instructions. It can be lighted by our Tri-color LED.
HO 1958 Cu Ft 2 Bay Covered Hopper - Closed sides
Colorado and Southern #19065
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
HO Industrial Signs - 1940-50s (39)
Contains 39 full color signs. Unique weathering and application instructions included in all poster/sign packs.
N Scale Waterslide Decals - Canadian Pacific AC4400CW Diesels (1997+)
HO NSC Ballast Hopper - CSX #965685
1980s+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
Dust Dabber
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Athearn HO Scale - RTR 30,000 Gallon Ethanol Tank Car - CTCX - #3 - 3pack
Detailed Information
301189, 301190, 301194
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
HO 20ft Corrugated Container - Evergreen/ESIU #1 (3pk)
MODEL FEATURES:
- Fully-assembled
- Easily stackable
- Each container is individually numbered
PROTOTYPE AND BACKGROUND INFO:
An intermodal container is a large, standardized shipping container, designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport ? from ship to rail to truck ? without unloading and reloading their cargo. Corrugating the sheet metal used for the sides and roof contributes significantly to the containers rigidity and stacking strength, just like in corrugated iron or in cardboard boxes. International containers have castings with openings for twistlock fasteners 20 feet apart on the eight corners, to allow gripping the box from above, below, or the side, and they can be stacked up to five units high for storage.
HO FGE 57Ft Mechanical Reefer - DCC Ready - UP/ ARMN #992063
Detailed Information
57Ft MECHANICAL REEFER FEATURES:
Available with onboard SoundTraxx sound
Scaled from prototype manufacturers drawings and field measurements
Repaints often vary by road number in the size and style of the reporting marks, car numbers and patch shapes
See-through protective screens on the genset end
Detroit Diesel 2-71 Genset visible inside
End wall corrugation visible inside
Inner refrigerator bulkhead
See through end platforms
Two different exhaust stack types: straight pipe with -flapper- or T-shaped -smokejack- per prototype and era
Full underframe detail including Keystone cushioning, air brake reservoir, control valve, brake cylinder, brake plumbing, and fuel tank
Factory applied end ladders and door closure rods
Trainline hoses with silver ends
Three different coupler cut lever styles per prototype
Body-mounted or truck-mounted brakes per prototype
McHenry operating scale knuckle couplers
100-ton roller bearing trucks with rotating bearing caps
Fully-assembled and ready-to-run
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Machined metal wheels with RP25 contours
Weighted for trouble-free operation
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO PS-2-4427 High Side Covered Hopper - CPAA Delivery 1-1970 #388162
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36in 8243; Wheels
Canadian Pacific CPAA NA Delivery 1-1970 shows as-delivered gray cars leased from North American Car Corporation to Canadian Pacific. These cars feature the distinctive NAHX Roman-style data lettering that also carries over to the CPAA reporting marks and numbers. The North American Car black/white/red badge down along the sill provides a tiny bit of color to this gray lease scheme. The models come equipped with Youngstown EZ-Roll gravity gates and Apex-style end crossover platforms. With a 1970 build date, these Pullman-Standard lot cars leased to NAHX include center sill supports between the bays and open-style end running board supports. The finely printed capacity data and internal liner data varies between each car number. And yes, don?t worry, these NAHX cars have their accurate serial number stencils along the centersill of the car on each side. Black 100-ton Barber S-2 trucks with accurate (and rotating!) Timken caps finish the model.
HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) #484587
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 36ft Chemical Tank Car - Vulcan Chemical/GATX #33776
FEATURES:
- One-time run of these road numbers, order now, limited quantity available!
- Newly tooled tank with bolted jacket
- Perfect for steam- and diesel-era freight service
- Prototypes carried all types of chemicals between producers and end-users
- Small chemical/pressure dome
- See-through platform
- Correct 33 inch turned metal RP-25 wheelsets
- Proto MAX(TM) metal knuckle couplers
Drill Bit #65 - 0.035inch Diameter (2 pkg)
Product Information
Walthers Drill Bits are the right tools for all kinds of hobby projects, from detailing locomotives and cars, to scratchbuilding, wiring and more. Theres a full range of common wire gauge - jewelers drill bit sizes from number 80 to 43, and each pack includes two ready-to-use bits. Walthers miniature hardware is a complete range of ready-to-use parts and tools for hobby projects, including wood, machine and nylon insulating screws, plus appropriate hex nuts and washers, in assorted standard sizes (machine and wood screws may be brass or brass plated). Drill Bits are part of the line of Walthers miniature hardware and tools.
HO Scale - 1937 Studebaker COE Gasoline Tank Truck - Unpainted and Resin Cast Kit
HO USRA Single-Sheathed Boxcar: C&NW
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Rounded Weathering Brush
HO Bus Maintenance Garage - Kit
Keep your mass transit fleet running smoothly with regular service at the Cornerstone Bus Maintenance Garage! This detailed HO structure kit is typical of facilities serving transit systems big or small, and will be equally at home as a city or county highway department shop, or a busy garage for your railroad maintenance-of-way vehicles or a trucking company.
FEATURES:
- Based on prefabricated metal buildings in use from the 1950s to the present
- Packed with details including vending machine, covered wastebasket, air compressor, four modern gas pumps, electric and gas meters, nonworking lights and more!
- Detailed plastic parts molded in three colors
- Measures: 6-9/64 x 8 (at roof overhang) x 3-5/16 inches
- Overhead doors measure scale 12 x 14 ft
Built-&-Ready Landmark Structures - Buzzs Sawmill
Assembled - 7-1/2 x 5-7/8 inches
(19 x 14.9 cm)
A detailed work of art! Buzzs has all the workings of a vintage steam-fired, belt-driven sawmill. Details include interior rafters and weathered roof, attached tool shed, pot belly stove, sawdust conveyor, overhead crane, loads of tools, sawdust and wood piles, Buzz figure and more!
HO SD45T-2 - DCC & Sound - Bessamer & Lake Erie #905
Detailed Information
BLE FEATURES:
Cab headlight with upper gyralight (Operates in DCC mode)-unique to BLE
Standard window cab
Leslie 3-chime Horn on long hood
Pilot mounted front ditch lights
Small front anticlimber
In the early 2000s, BLE went on the used locomotive market looking for heavy and reliable motive power. They purchased 11 former SP/SSW SD45T-2s designating them as SD40-3s. These units were rebuilt with the removal of the SP nose headlight, -L- window cab, and large front plow. Additions included front ditch lights, a unique BLE-style cab headlight with upper gyra light and lower standard headlight, MU catches on the front pilot, and the horn being moved to the long hood.
SD45T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Photo-etched windshield wipers
Separately applied air tanks
LED Lighting
HTC truck sideframes
See-through cab windows
Welded electrical cabinet air filter box
All-wheel electrical pickup
See-through dynamic brake fans
Separately applied wire grab irons
Rubber trainline and MU hoses with silver ends
Standard late Dash-2 cab with or without -L- window per prototype
See-through radiator grilles with new rear truck gearbox specific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry operating scale knuckle couplers
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Chassis accepts Genesis motor retro fit kit for an even higher performance motor.
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Highly-detailed, injection molded body
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Economi sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
UTP Panel Cab Bus Fascia Panel w/RJ12 Plugs
FEATURES:
The UTP cab bus panel provides a low cost means of adding walk around capability to your layout. The panel has 4 RJ-12 connectors wired in parallel, two on the front and two on the rear. Your cab bus can be daisy-chained from one panel to the next using the rear connectors. One or two cabs can then be plugged in to the front connectors. Please note the Command Station side versus the More UTP panels side when wiring your panels. The UTP can also be used as a cab bus splitter.
If any cab bus item is 30 feet of cable or more from the command station you will need to inject power into the cab bus to make sure a clean signal of minimum 8v gets out to the the devices on the cab bus.
The regular UTP - 1/8inch (3.5mm) (Mono mini headphone jack) on the back of the UTP. The tip of the plug is positive (+) and the sleeve is negative.
If you have a regular UTP but want to add the P114 for added cab bus power, you will need to hack off the end and add the male 1/8inch (3.5mm) (Mono mini headphone plug) or solder the P114 directly to the board.
Additional power for the Cab Bus can be added to the socket in between the Cat5 sockets. We suggest a 1/2 to 2 Amp, 12 to 14Volt, Regulated DC power supply such as the NCE P114. (5.5/2.5mm plug center +).
HO SP C-40-3 Steel Cupola Caboose - Texas and New Orleans (T&NO Delivery Scheme) #416
1940+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
HO ET44 Tier 4 - DCC & Sound - CN/100th Anniversary #3242
Road number 3108 Has a black cab roof; does not have the circle graphic on the nose
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
AK Interactive Engine Oil glossy finish
The engines and transmissions of many vehicles offer a special aspect where the grease and the remains of spilt fuel are the protagonists. These enamel based effects just need to be painted on. Apply with a brush in different lays of different intensities for the most realistic effects. For a lighter effect you can dilute them with White spirit
HO #4 Manual Turnout - Right Hand - 21-5/8in (550mm) 19 Degree Diverging Route
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes! Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation.
Suitable for all types of layouts, temporary or permanent, this modular track system features an integrally molded roadbed for realistic appearance.
Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
HO NSC Ballast Hopper - Herzog (Early) #6320
1977+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
Expand container traffic on your 1960s and 70s era HO layout with this series of authentic models from - SceneMaster, featuring:
- Standard end-door and right-side door versions as appropriate
- Authentic rivet, door latch and hinge details
- Colorful period schemes
- Perfect period loads for WalthersMainline G85 and 60ft Pullman-Standard VTTX container flatcars (each sold separately)
Streaking Effects Enamel Paint Set (12, 13, 14)
35ml X 3 jars per set
Talus - Fine Buff (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings, and/or road cuts. Intermix grades and blend shades for the most realism. Color natural talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle talus and secure with scenic cement (#191).
Particle size - Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
HO Slab-Side Covered Hopper (6 Hatch) - Canadian National (CN Noodle) #352158
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
HO Scale - 1951-55 Tandem Axle Fruehauf 34Ft West Coast Style Dry Van - Unpainted and Resin Cast Kit
N Scale 3230 Covered Hopper - CIT Group (CBFX) #440512
Features:
- All new tooling
- Ready to run
- Injection molded plastic
- Fine scale detail
- Etched metal roofwalks
- Crisp painting and printing
- Magnetic couplers
- Metal wheelsets
The Trinity 3230 Pressure Differential (PD) covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
N Scale 48Ft Ribbed Side Container - Canadian National (Laser Scheme)
Product Information
Modernize your HO intermodal operations in minutes with these SceneMaster Containers, featuring:
Improved door latch detail
Great detail for terminals and industrial scenes
Realistic loads for any well car
Ready to use
N Scenic Accent Figures - Second Shift Workers (6 pkg)
HO SD60 - DCC/Sound - Union Pacific #2156
MODEL FEATURES:
Locomotives come with railroad-specific details including: Operating beacon (in DCC/Sound version), horn, winterized hatch, antenna, handrails, etc.
SPECIFICATIONS:
DCC: Equipped with Econami2
PROTOTYPE MANUFACTURER: EMD
Axles: 6
LIGHTED: LED Lighting
PROTOTYPE AND BACKGROUND INFO:
In 1984, Electro-Motive (EMD) introduced the 60 series locomotive. These had many improvements over the earlier models including features such as: New and improved EMD 710 power plant producing 3600 HP, wheel slip control, computerized cabinet replacing the older and unreliable components.
This design spawned into many other upgrades within its class like the modernized wide cab, Isolated cab, and even the start of AC traction technology.
These locomotives were suited for just about any mainline service that could be thrown at them. The model was fairly popular with class one railroads, with Norfolk Southern purchasing the most at 151 units. Most of them are still in service today. Norfolk Southern in 2010 started a large full rebuild program of their SD60s (including purchasing cores from other sources) into SD60Es, which rebuilt them from the frame up with new electrical components and a newly designed cab to improve visibility and forward crash impact safety.
HO AutoFlood III RD Coal Hopper - UP/CMO #504273
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO New Look Bus - New York Bus Service -Manhattan Express - Deluxe #1491
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
HO Enterprise 2-Bay Covered Hopper - MSGX (Flo-Sweet) #280
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO Bi-Level Auto Rack - CSX/TTGX Flat Car #979135
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #66
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO GE Dash 9-40CW - DCC & Sound - Norfolk Southern NS #9773
NS FEATURES:
Front and rear ditch lights (Alternately flash in DCC mode)
High-mounted head light and number boards
K5 horn
Electronic brakes
Graham White Electronic bell
Delivered new in 2003 from GE, NS took delivery of class 9745-9811 Dash 9-40CW locomotives. Some unique features include: electronic bell, high mounted headlight, and electronic parking brake. We are offering both versions of the front cab schemes to choose from!
ROAD NUMBER SPECIFIC FEATURES:
#9754 -White face- scheme
#9773 -Unibrow- scheme
#9806 -Unibrow- scheme
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO GP40 - Gold DCC & Sound - CSX (Bright Future) #6611
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
HO 50ft Evans DD Plug Boxcar - LNAC #5046
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
N Scale 4-Bay Cylindrical Grain Hopper - Scoular #1687
Features include:
- NMRA profile wheels
- needle-point axles
- body-mounted E-Z Mate(R) Mark II couplers
N Scale Prairie Co-Op Elevator - Kit
Classic small town terminal elevator
Typical of concrete elevators in use from 1915 to today
Used with all types of grain
Square design with four silos
Off-center head house
Cement block unloading shed
Cement block office with truck scale
Loading spouts for boxcars & covered hoppers
Separate dust collector, vents & sampling arm
Molded in white, light gray & clear plastic
Finished model measures:
Main Structure: 5-3/16 x 3-3/16 x 7-1/4 inches 13.1 x 8 x 18.4cm
Office/Scale House: 2-5/8 x 2-1/16 x 1-3/8 inches 6.6 x 5.2 x 3.4cm
Truck Scale: 1 x 3-1/2 inches 2.5 x 8.8cm
Flat Brushable Acrylic - Flat Ash - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
Bi-Level Auto Racks - Canadian National - White w/Red Logo #9258
All are Ready-to-Run.
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene-
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage.
Wall-Mount Gooseneck Light - Just Plug - pkg(2)
Hi-Tech Details HO 6003 Universal Antenna Dome GE Version for BNSF and UP
Features
Molded in white plastic and ready for finish to be applied.
Tree Armatures - Deciduous - 3/4 - 2in (114/pk)
Bend and twist Tree Armature into a realistic shape. Apply Hob-e-Tac to the branches. Let dry clear and use a variety of the of the following foliage materials to make all types of trees for our layout: Underbrush, Bushes, Clump-Foliage, Foliage Clusters, Lichen, Foliage, Fine-Leaf Foliage, and Poly Fiber.
Tamiya Paints 87031 Masking Tape - 10mm
HO SD70M - DCC & Sound - Union Pacific #4454
UP FEATURES:
UP lightning stripe scheme
Early SD70M body
Nathan K-3 horn
Air Dryer
Spare knuckles on rear pilot
Prime air filters
HTCR-II trucks
EMD low plow
Red sill stripe
GPS dome
Small can & Sinclair antennas
-Under Warranty- on cab
Late style fuel tank & breather piping
This release of UP SD70Ms depicts units from the first order, with early (non-flared) SD70M bodies in their as-built appearance. For later-era operations, a consumer-applied GPS dome is included.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
FEATURES:
- One time run of these road numbers, order now - limited quantity available
- Prototypes seen from coast-to-coast 1974 to the present
- Handles all types of general freight loading
- Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
- 41ft 3in Truck Centers
- 15ft 2in Tall
- 10ft 8in Wide
- Fully assembled
- Correct 33in RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Code 100 Curved Snap-Track - Nickel-Silver Rail - 24 Inch Radius (6)
HO Evans 52Ft Gondola - Norfolk Southern #997281
Features:
True scale dimensions with accurate details
Weighted, detailed underframes
Trucks equipped with free-rolling metal wheels
Equipped with AccuMate Knuckle Couplers
Accurate painting and lettering
AccuMate couplers are made under license from AccuRail, Inc.
HO NSC 60ft Ingot Flat Car - RTAX- Liberty Railway Services
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
HO 59Ft Cylindrical Hopper - Scoular SCOX #1536
(yellow, brown, green; Double-Corn Logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
One time run of these roadnumbers, order now - limited quantity available
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO MLW M420 - DC/DCC Ready - Canadian National (North American Scheme) #3561
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
Bi-Level Auto Racks - BNSF New Image - Orange Rack on TTGX Flat Car #TTGX 965341
HO RTR PS 4740 Covered Hopper - Norfolk & Western #176854
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Body-mounted McHenry operating scale knuckle couplers
36inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Multi-packs feature unique road numbers
Weighted for optimum performance
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
HO EMD SW9 - DCC & Sound - Louisville & Nashville (L&N Grey Scheme) #2269
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Louisville & Nashville:
Delivered in 1950
Short side handrails
Carbody style handrails
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
Santa Fe Interlocking Tower - Kit
Product Information
The Walthers Cornerstone HO Scale Santa Fe Interlocking Tower makes adding authentic ATSF structures to your railroad easier than ever. Used in many locations along the railroad, this stucco texture tower will look great at any junction or yard along your Santa Fe-themed layout set in the steam or classic-diesel era. Although based on a standard ATSF building, this tower is typical of those seen along other railroads as well. The Santa Fe Interlocking Tower kit is one of a wide variety of Cornerstone HO Scale railroad structures.
Designed from ATSF standard plans
Ball and cross medallions, stucco finish and diamond-pattern shingled roof
Typical of towers used across the Santa Fe system
Molded in two colors plus clear window glazing
Cornerstone HO Scale railroad structures.
The Santa Fe Interlocking Tower measures: 2-7/8 x 4-7/8 x 5-1/8inch (7.3 x 12.3 x 13cm)
Tangent Scale Models HO Conrail PC Samuel Rea Shops 4600 Covered Hopper
Product: PC Samuel Rea Shops 4600 Covered Hopper System
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps
Wheels: CNC-Machined 36in Wheels
Conrail (CR) H51C -Quality Gray Repaint 1992- replicates the 1990s-2000s look for the 400-car H51C class. Conrail repainted many cars in their Conrail Quality scheme, and we think the SRS 4600s look particularly sharp! This CR car has later-era gravity gates, replacements for the original Youngstown gates. The car body is equipped with body-mounted brake hardware with center-tube linkage. Sam Rea built the car with a ribbed roof hatch, a low brake housing and a side-mounted train air line the length of the car, all features that are present on this Tangent replica. The B-end has as accurate Ajax hand brake, modern brake wheel, and a replacement Morton crossover walkway. Check out those gorgeous 100-ton Barber S-2 trucks with proper body-style brake beam and rotating Timken caps! This Conrail Quality H51C is painted in light gray with black graphics for the 1992+ era. Look in the upper right corner, and you will notice the ex-PC car number! RTR Conrail Quality and ready to work on your railroad.
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
Models depict in-service locomotives from the mid-1990s and beyond.
Road name and road number-specific painting and lettering.
Multiple road numbers offered.
New and improved high-torque motor and drive mechanism guarantees smooth operation.**
Operating radiator fans. Improved radiator fan drive unit with quieter operation and selective fan control.**
All-wheel power pickup and all-axle drive.
Heavy die-cast, zinc alloy chassis.
AuroraJanney scale head replica couplers installed.
NMRA RP-25 wheel contour with Code 110 tread width.
Minimum radius: 18? (recommended 22?)
* Lighting functionality is limited on DC models operating on DC track power.
** Improvement over our previously-released HO scale SD60F.
DC Version Features:
DCC ready with 21MTC connector.
Dual sugar-cube speakers (functional after installation of a DCC sound decoder).
Operates on DC track.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23012
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Athearn HO Scale - RTR 30,000 Gallon Ethanol Tank Car - CHSX - #1 (3 pack)
Detailed Information
255014, 255027, 255030
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
Diesel Locomotive Winterization Hatch - 48Inch FAN - GP9/GP18 - pkg(1)
HO RTR 53Ft Platewall RoadRailer Trailer - Conrail/ Norfolk Southern (Triple Crown) #461482
(white, Large Logo, NS-CR Logos)
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
HO PC&F 5241 CUFT - Boxcar - Olympic Railroad (OLYR) - 6 Pack
7841, 74814, 74835, 75103, 75118, 75120
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Tru Color Paint - Acrylic - Chicago & North Western Zito Yellow - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Delivery G43A 2-1968 Gondola - Penn Central #576041
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inchh Wheels
PC -Delivery G43A 2-1968- in the original Penn Central green paint scheme, and a PC version we have not yet offered! These gorgeous models have 2 placards in place for the PC reporting marks, road numbers, and ACI label on the left side of the car. On the right side is an additional placard that includes a PC logo and Penn Central lettering. These placards are utilized on this class of PC car since these cars have side corrugations on each panel, where they knew that putting paint on the corrugations would not last very long! These cars have corrugated ends, and the Tangent replica includes oxide red car interiors ? on the interior walls and ends ? like the prototype. We even duplicated the slight green overspray on the inside end corners! The 100-Ton trucks feature accurate rotating -Timken- caps.
HO GE 44 Tonner Phase Ic Body - DC/DCC Ready - Generic Industrial: Yellow
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
HO USRA Double sheathed wood boxcar
Wabash
Includes road numbers 79687, 79834, 79945, 80176
During World War I the US railroads were struggling to keep up with wartime traffic, in part because of a shortage of service- able freight cars. In an attempt to solve this problem, President Wilson nationalized the railroads under the United States Railway Administration, or USRA. One of the first tasks assigned to the USRA was to develop common designs for new freight cars. Among these was a 40ft double-sheathed wood boxcar with a fishbelly steel underframe.
Starting in 1918, nearly 25,000 copies of the double-sheathed boxcar were built and delivered to 24 railroads throughout the country. The cars were well received, and many cars continued in regular service on many roads into the 1950s with many updated to the newer AB-brake system.
Rapido’s new model of the USRA double-sheathed boxcar features an all-new body with correct fishbelly underframe and correct free-standing details. Models will be equipped with either KC or AB brakes as appropriate. These cars fill a need for a state-of-the-art model of this common car on any transition-era or earlier period layout.
Model Features
Accurate new tooling
Correct details including roof and handbrake
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Accurate decoration
Fully decorated and assembled
Factory-installed Macdonald-Cartier couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Starter Set
Unlike needle files, Flex-I-File automatically follows compound curves, contour changes, and fillets without leaving scratches or flat spots. This Starter Set is exactly what you need to get going on your hobby project!
Contents: 1 Anodized Aluminum Frame and 6 Assorted Abrasive Refill
HO United Trucking - Assembled - 2-5/8 x 6 x 3-3/8 inches
The Walthers Trainline United Trucking building is the small truck transloading terminal business that every layout needs. This fully assembled structure features parts molded in appropriate colors so theres no painting needed. Colorful signs come applied to the building and factory-installed windows make this building ready to simply place along your railroad.
Figures, vehicles and accessories shown in the photo are sold separately.
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- Canadian National
#621303
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Flat Clear Lacquer Finish Paint
Reduces glossiness of painted surfaces for a matte finish
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
Code 70 #6 Turnout - Medium Radius - Left Hand, Unifrog
Product Information
Peco HO Scale Code 70 Unifrog Medium-Radius #6 Turnout is electrically -live,- except for the frog tip and wing rails, and operates as an Insulfrog turnout without modification or additional wiring. To power the frog and wing rails, use the supplied connecting wires. Complete instructions on wiring and use are included in the packaging. In HO Scale, Code 70 rail represents smaller 100# per yard rail, common on mainlines in the steam era and on branches and some light rail lines in the diesel era. Check out the entire line of Peco Code 70 track.
HO EMD SD7 - DC/Silent - Bessemer & Lake Erie #451
Bessemer & Lake Erie
- Unique -B&LE- style sand fill door hatches
- Long hood forward operation
- Extra large pilot step and corresponding additional stepwell step (First time done on a plastic model!)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO Double Billboard - Kit
DIMENSIONS:
5-1/2 x 1-1/4 x 2 inches
HO EMD GP35 - Paragon4 Sound/DC/DCC - CB&Q #989
(Chinese Red)
Ubiquitous on American railroads, the EMD GP35 is a 4-axle diesel-electric locomotive built by EMD and subsequently General Motors Diesel in the mid 1960s. Over 1300 of these locomotives were produced, and they were operated by virtually every major railroad in the United States. Additionally 26 units were built for Canadian railroads and another 57 units were built for Mexican railroads. These freight locomotives were powered by EMD 567D3A 16-cylinder engines that generated 2500 horsepower.
List of individually controllable lights in our EMD GP35 models:
- Headlight
- Rear Light
- Mars Light (SP only)
- Numberboard Lights (Front & Rear)
- Front Classification Lights
- Rear Classification Lights
- Emergency Light (SP only)
- Rotary Beacon (where appropriate)
- Ditch Lights (where appropriate)
- Cab Light
Road-specific detail options that are prototypically accurate for each road name:
- Truck sideframes
- Dynamic brake hatch
- Open & closed type fans
- Short hood detail arrangement
- Long hood end detail arrangement
- High short hood option where accurate
- Horn type and location
- Bell location
- Multiple front pilot types
- Multiple rear pilot types
- Accurate cut lever types
- MU receptacle arrangement
- Multiple sunshade options
- Antenna type and location
- Wind deflector type
- Rooftop AC for ATSF type
- Rotary beacon type and location
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up
- ABS Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, Wipers, and Etched Metal Grills
- Prototypical Light Operation - accurate for each paint scheme
- Prototypically Accurate Sounds for the EMD GP35 Diesel Locomotive
- Metal Kadee-compatible Couplers (2)
- Will Operate on Code 70, Code 83, and Code 100 Rail
- Minimum Operating Radius: 18 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
Rock Molds Wind Rock
Highly detailed, flexible and durable rock molds can be used to cast small boulders, rock outcroppings, top rocks for fields and creeks, or make entire rock faces by combining castings produced with these molds.
HO 60ft PS Flatcar - TTX/VTTX #92289
(yellow, black and white TTX logo)
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Leaf Flakes - Shaker 16oz - Leaf Litter
N Scale Modern Tagger Graffiti Decals - Set #5 (8pcs)
Love it or hate it, graffiti is everywhere. We do not condone painting graffiti on real railroad cars, buildings, bridges, etc. and it is against the law. But defacing your model railroad with Blair Lines Graffiti Decals is fun and still legal as far as we know! All decals are reproductions of graffiti found on real railroad cars.
All of these graffiti decal sets are now lasercut! What this means is you will no longer have to trim these decals close. You only have to cut a couple of small tabs and soak the sheet in water. As an added bonus, the decals are now printed on white decal paper making them more opaque!
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
HO Storefront Signs - Main St. (Set #1)
Blair Line HO Scale Business and Storefront signs are printed in appropriate colors on thin plastic for easy assembly or placement with plastic cement or CA glue. Colorful signs are based on real signs and many include two identical signs for back-to-back, two-sided mounting. Steam and diesel-era signs make great roadside, street-side, trackside and structure details.
#107 HO Scale Disconnect Log Car w/out logs Kit
Highly detailed logging equipment. Die-cast center beam, metal trucks, ribbed back wheels, log bunks and falling stakes. Comes with couplers. (without logs) One pair trucks
Master Craftsman Kit
Spray Can - Neutral Gray (USAAF) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
Intermountain HO - HTTX Yellow Trailer Train
60 ft Wood Deck Flat Car
Features sharp paint and lettering, wire details, laser-cut wood decks, metal wheelsets and Kadee(R) couplers.
HO EMD SD10 - DCC & Sound - Milwaukee Road #543
Milwaukee Road
- SD10 model designation given by Milwaukee Road for their capital rebuild program of their old SD7s and SD9s
- A first in HO Scale plastic models
- Single fuel tank
Chopped short hood and modified cab
- Later style Horst air intake
- Rotary beacon
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO EMD FT A+B Set - DC/DCC/Sound - Northern Pacific (NP Pine Tree Scheme) #5406A+ 5406B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
N scale Track Assortment - Set B
Straight Sections - 4 Each:
1-1/2 inch (38mm)
1-5/16 inch (33mm)
HO - 89ft Thrall Bi-Level Auto Carrier - Ready To Run - Norfolk Southern
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6inch (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
Factory-installed grab irons
Separately-applied ladders and brake equipment
Ultra-smooth rolling metal axles with 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24inch radius is recommended for operation.
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Southern Pacific #32971
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Southern Pacific #32865
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Norfolk Southern G41A Repaint 1976 w/o Hoods PRR Shops G41A Coil Car
NS GP67 Repaint 2005+ is an exciting release for us. NS rebuilt some of their G41A cars around 2000 and placed them in the GP67 class. These rebuilds were changed from 6 troughs to 5 troughs to accommodate larger diameter coils. This major change, along with yellow trough bracing, makes these cars really stand out in the crowd. The Tangent offering picks up in 2005+, where the NS cars have received their conspicuity stripes. The troughs received not-so-subtle wide white stripes down the centerline of the car to assist loading. If you read the data carefully, you will find accurate 50 Year Life Extension stenciling and painted diamonds labeling the cars for HOT steel coil service. The 125-Ton trucks feature NS reporting mark and car numbers along with 38in wheels and rotating Timken caps. These are some HOT cars for the modern era.
SPECIFICATIONS:
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
HO 60ft PS Flatcar - Trailer Train/VTTX #97611
(yellow, black TT logo)
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Tru Color Paint - Acrylic - CN Green - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
BTN8 Momentary SPST Normally Open Pushbutton - Green (8/pk)
1/4 inch (6.35mm) mounting hole.
HO Canadian National ex IC 50Ft Boxcars - 1990+ - Waterslide Decals
Description: HO scale - Illinois Central (IC) Canadian National ex IC 50Ft Boxcars Circa 1990+
HO Single Comet Commuter Coach - Montreal AMT (Late Lake Scheme) #724
The Rapido Trains HO scale Comet Cars features:
Designed from field measurements as well as original blueprints and documents.
Full interior detail including individual seats, and unparalleled underbody detail incl. all pipes and boxes
Extremely free-rolling inside-bearing trucks with metal wheelsets
Tinted windows and accurate painting and lettering
All-wheel electrical pickup and advanced circuitry for flicker-free lighting on both DC and DCC layouts
Coaches feature controllable interior and end marker lights using the included magnetic wand
Cab Coach lighting controlled using the magnetic wand on both DC and DCC layouts
HO EMD SW9 - DC/ Silent - Boston & Maine (B&M As Delivered) #1224
Boston & Maine:
Delivered in 1952
-Trash can- style spark arrestors
Deck mounted side handrails
Hood mounted number boards (road number specific)
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO GMD-1 - DCC & Sound - Canadian National (1900s Noodle w/ Red Cab) #1915
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
HO ACF 5250 Covered Hopper - Honeymead (ACFX) #56974
Features:
Ready to run
Injection molded plastic
Fine scale detail
Etched metal roof walk
Metal knuckle couplers
Road specific hatch and outlet configurations
Road specific roof walk variations
Three body style variations
Separately applied wire grab irons and wire brake lines
Crisp painting/printing
Free-rolling 100-ton trucks
HO EMD SD70ACe Diesel - DCC & Sound - Norfolk Southern (30th Anniversary) #1030
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
NS FEATURES:
Swapable alternate roof with leader PTC antenna array
(Also available separately [ATHG68899])
High-mounted headlight
Isolated cab
Front and rear illuminated ditch lights
Late handrails
Norfolk Southern - Heritage
In 2012, Norfolk Southern unveiled a group of 20 locomotives painted to honor their predecessor roads. In the late 2010s, the units had their roof configurations modified to accept Positive Train Control antennas. Both roof styles are included.
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO NSC 3800 Covered Hopper - TH&B (Delivery Scheme) #1520
They are back, again! The famous Rapido 3800 cu.ft. Cylindrical Hoppers make a triumphant ~THIRD~ return with new road numbers and paint schemes!
FEATURES INCLUDE:
- Round-hatch or Trough-hatch design
- Correct Dofasco S-2 100-ton trucks
- Two body variations with 6- or 11-side panels
- Three brake equipment variations and optional additional air reservoir on NSC cars (if applicable)
- Etched running boards and brake crossover platform
- Factory-installed air pipes and coupler cut levers
- Finely molded plastic walkway supports and end cages
- Full separate air piping and brake equipment details
HO RTR ACF 4650 3-Bay Hopper - Norfolk & Western #171268
Date: NEW 6-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO 60Ft Bulkhead Flat - Southern Pacific SP (3pkg)
Road numbers: #509349, 509381, 509440
MODEL FEATURES:
Separately applied end details and brake wheel
33inch machined metal wheels with RP25 contours
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
N Scale Concrete Slab Double-Track Straight Viaduct - 9-3/4in (2pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly.
The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO 36in Normal Tread - All Metal Precision Wheelsets-12pk
Tangent Scale Models is proud to offer our 36inch -normal tread- CNC-machined brass wheelsets for those who want to replace their current wheels with wheels that roll better and look better than those from other brands. Tangent wheels are leaders in quality in HO scale. We offer them in 100 count bags and 12 count blister packages. Offered in a 1.004inch axle length, our 36inch wheels can be used in trucks from virtually any brand. 36-inch prototype wheels are used on virtually all cars greater than 80 tons, making them the most common wheel for post-1960 modeling (with increasing frequency as time went on). Try our wheels to improve the operation of your equipment!
Refinery Piping
Includes overhead supports, angles and other fixtures. Modular design allows for many possible configurations to fit your refinery complex
N Scale NSC 5277 50Ft Plug-Door Boxcar - Canadian National CNIS #413065
MASTER MODEL FEATURES:
Bodies: 5111 or 5277 cubic foot styles
Ends: Nine or ten corrugations
Painted safety rails
Doors: 9ft or 10ft plug doors
Side Sills: Deep or shallow sills
Trucks: 70- or 100-ton
HO PC&F 5241 CUFT - Boxcar - Olympic Railroad (OLYR) - Single Car #74835
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO RTR PS-2 2600 Covered Hopper - Chicago North Western #95807
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
HO International Wide-Vision Caboose - Burlington Northern (2016+) #12513
(WFE Rebuild 2016+ Era w/FRA Light)
Product: BN International Wide-vision Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber or Gould Caboose Roller Bearing with separate brake beam part as appropriate for each paint scheme
Wheels: CNC-Machined 33 inch Wheels
DC/DCC Lighting Features: Interior Lighting as well as lighted FRA Steady Red Lights
HO GE 44 Tonner Phase III - DC/DCC/Sound - Sante Fe (Zebra Stripe) #463
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
HO EMD GP40 - DCC & Sound - Canadian National (Large Noodle) #4014
1967+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Plastruct 90406 ABS 5/8 Warren Open Web Truss (2pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
5/8
HEIGHT IN MM
15.9mm
WIDTH IN INCHES
1-3/32
WIDTH IN MM
27.8mm
THICKNESS IN INCHES
1/4
THICKNESSS IN MM
6.4mm
LENGTH IN INCHES
12
LENGTH IN MM
300mm
USE DESCRIPTION
ABS OPEN WEB TRUSS – WARREN STYLE 2 Use for roof trusses, bridges, conveyors, space frames and other steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or pro
HO GMD SD40-2 - DCC & Sound - BC Rail (RWB Hockey Stick) #767
Product Information
This Bowser Executive Line GMD SD40-2 is based on the huge fleet of diesels constructed by the General Motors Diesel Division plant in London, Ontario for several Canadian railroads, and a few US lines as well. This finely detailed model features GMDD and railroad-specific details, accurate decoration, operating headlight, can motor, brass flywheels, nickel-silver wheels with RP25 flanges and knuckle couplers.
Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound Select decoder. Analog (DC) version has 21 pin socket for DCC module.
Bowser does not recommend LOK sound locos for use on DC layouts.
Features LokSound Select decoder, GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, Flywheels, Can motor, RP25 flange, KD couplers
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
HO Alco FA-1 & FB-1 Set - DCC & Sound - Canadian Pacific (Script Scheme) #4015, 4406
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
VIA RAIL (EARLY) (1978 to mid 1990s)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
Bring your urban or countryside railroad to life with realistic SceneScapes(TM) trees by Bachmann. Create your own orchard or blanket a hillside in dense forest with deciduous and coniferous trees offered in a variety of sizes. Suitable for all scales.
? for use with all train layouts
? realistic colors
? removeable bases for more placement options
? size assortment for added realism
Suitable for all scales, but most commonly used in N; nine pieces per pack
HO - Nathan K3 K3LA 3-Chime Air Horn - Lost Wax Brass Casting
HO Code 100 Curved Track - 22 Inch Radius (6pcs)
Atlas is the leading manufacturer of model railroad track, worldwide. You will find that our track is easy to use and will last on your layout for years. All Atlas code 100 track is made with premium nickel silver rail and black railroad ties.
16 pcs. to a circle.
HO GMD SD40-2W - DCC & Sound - CNNA (Dynamic Map) #5363
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. DCC with Sound version features LokSound V5 decoder.
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
VIA Rail HEP2 Current Scheme Business (Grey) (2020 to Present)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
HO EMD SD9 - DC/Silent - Chicago, Burlington & Quincy #840
-white frame
Chicago, Burlington & Quincy
- Phase IV (First time for a plastic model!)
- Higher short hood with a corresponding cab height
- Cornered-off section on the long hood behind the cab
- Two 48inch radiator fans as opposed to the normal (four) 36inch fans
- Conduit pipes were removed from the top of the radiator
- No ladders on the short hood end
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO Scale Freight Car Grab Irons - 18Inch Curved for Tank Cars - pkg(12)
60ft ACF Auto Parts SD Box Car Detroit and Toledo Shoreline
MODEL FEATURES:
- 70-ton roller-bearing trucks with blackened metal wheels and adjustable screws
- Authentically painted and lettered detailed body with sliding doors and distinctive “Precision Design†recessed panels
- Prototypically designed roof and ends with full rivet detail
-Detailed die-cast metal underframe for improved operation
-Separate brake system and air reservoir
- Cushion underframe with extended coupler pockets
-Accurate painting and printing
- AccuMate operating knuckle couplers with mounting screws
- Roof overspray
HO 89ft Thrall Bi-Level Auto Carrier - NS/TTGX #159820
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
HO 16,000-Gallon Clay Slurry Tank - GATX #29150
MODEL FEATURES:
- Separately applied fittings nozzle, manway, and small safety valve nozzle
- See-through Photo-etched metal walkways and end platforms
- Full brake plumbing and rigging including brake wheel, air reservoir cylinder, triple valve, brake linkage, trainline, brake rod, large brake
- Printed marking on the sides, ends, and top of the tank body
- Fine scale side ladders
- Placard holders
- Printed marking on the sides, ends, and top of the tank body
- Equipped with McHenry AAR upper/lower shelf couplers
- 36 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Multi-packs feature unique road numbers
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Kaolin, a fine white clay, is produced by the natural chemical weathering of aluminum silicate minerals such as feldspar. Mined in the southeast United States (primarily Georgia and Florida), kaolin is used in the manufacture of ceramics, bricks, light bulbs, cosmetics, medicines and food additives. The largest use is in the manufacturing of paper, especially in creating glossy paper. Kaolin is shipped both as a dry powder in covered hoppers and in tank cars with water as a slurry. In the slurry form the weight of water requires the tank cars be smaller capacity compared to other liquids such as ethanol and LPG. Identical tank cars are also used to haul calcium carbonate slurry, used in the making of lime and cement.
One of the more modern versions of the 16K Gallon Tank car is designed and manufactured by UTLX Manufacturing Inc (formerly Union Tank Car). The car is a 286K (referring to a 286,000 pound gross rail load limit) design with a capacity of approximately 16,000 gallons. The capacity varies slightly between UTLX and Englehard, the operators of the cars. The car is an AAR Plate C clearance car with a 111-inch I.D. tank and an overall length of 44 feet. For a complete bottom unloading the car incorporates a Funnel-Flow design. The cars are lined and kept in dedicated service to avoid cross-contamination.
HO 40Ft PS-1 Boxcar - Louisville & Nashville (L&N) #6546
Built: BLT 3-52
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
HO Yellow Striping - 3 and 4,3/4 inch Widths - Decals
Description: (formerly 87-110-6) Striping - 3 and 4,3/4 Widths - Yellow
XF-85 Mini Acrylic - Rubber Black - 10mL Bottle
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or airbrushing. These paints can be used on styrene resins, Styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.
When airbrushing be certain to use any of the following Tamiya thinners: Items-81020, 81030, 81040, 81520, 87077.
Tamiya bottle paint label meanings and quick tips:
- X appointed colors have a glossy finish while XF designated colors are flat finish.
- The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
- Items 81521 and 81021 (Tamiya X-21 Flat Base) can be used as a flattening agent on Tamiya Gloss bottle paints. Simply add any X-gloss color then add flat base. Mixing ratio: 1:1
- The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
- For better paint brushing results use Tamiya Paint Retarder (item 87114) for a smoother brushstroke free finish.
HO Traffic Light - Double Sided
FEATURES:
- Long-lasting LEDs
- Makes model street scenes more realistic
- Common North American-style traffic signal as used in many communities
- Fits popular modeling eras
- Great detail for day or night scenes
- Fully assembled from tough metal parts
- Install in minutes in new or existing scenery
- Color-coded wiring
- Operate with Traffic Light Controller (949-4389 sold separately)
HO & N Scale TSU-N18 Tsunami2 Sound Decoder for EMD-2 Diesels
Dimensions: 25 x 10.5 x 4.1mm
Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output)
Function Outputs: 6
Audio Amplifier: 1 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
BIG sound in a small package! The small size of our new Tsunami2 TSU-N18 decoder makes it ideal for both N and small HO models that come equipped with a NEXT18 socket. Installations can not get any easier. Simply plug this decoder in and enjoy all of the Tsunami2 features you know and love!
You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive dynamic digital exhaust, functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. Soundtraxx also offers a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12 in each diesel version), whistles (90), airhorns (40+), couplers, dynamos and more!
The TSU-N18 can be wired to a CurrentKeeper to maintain performance over dirty track and switches.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15246
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
N Scale Laser-Cut 2-Lane Curved Wood Grade Crossing - 18-20in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights.
Ready-Made Realistic Trees - Deciduous - 6 to 7inch 15.2 to 17.8cm pkg(2) - Medium Green
60ft Pullman-Standard Flatcar - Ready to Run -- TTX HTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO GMD SD40-2 - DCC & Sound - Ontario Northland #1735
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO RTR 45Ft Fruehauf Z-Van Trailer - Santa Fe #253455
Detailed Information
MODEL FEATURES:
Separately applied mud flaps
Rubber tires
Fully-assembled and ready to use out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
HO Budd Slumbercoach - Amtrak (Phase 3) #2081 Loch Long
All new from the ground up, the Rapido Slumbercoach features:
Designed from original blueprints
Full Rapido level of underbody detail including separate pipes and conduits
Full multi-color interior detail including roomette doors
Track-powered interior lighting (operable on both DC and DCC)
Accurate GSC 41-NDO-11 trucks with disc brake detail
Etched-metal end gates
Sprung diaphragms
Rapidos renowned stainless-steel finish
HO 68Ft Railgon Gondola - BNSF #518445
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO Curved Track - 22.5-Degree Section, 14-1/2 Inch Radius (4pk)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes! Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation. Suitable for all types of layouts, whether temporary or permanent. This modular track system features an integrally molded roadbed for realistic appearance. Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections!
Dimension shown is length per piece. 16 sections are needed to make a complete circle of track.
#6 Left Hand Super Track
HO ATSF PS4750 Covered Hopper - Santa Fe (Delivery Gray 10-1979) #315947
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
ATSF -Delivery Gray 10-1979- is now available in the distinguished light gray paint with light blue -Santa Fe- lettering. This light gray scheme is very different from the previous Tangent ATSF offerings! The Santa Fe GA-905 class were built by Pullman Standard and leased from North American Car Corporation. Check out that sharp red/white/blue NACC badge! Featured details include prototypically accurate body-mounted brake hardware and scale-sized Miner -Selflok- outlet gates. We didnt stop there. This car is loaded with accurate Pullman-applied ATSF graphics and data. From the distinctive narrow style Roman numbers to individual North American Car Corp. car serial numbers on the center sill ? its all there.
HO NSC 64 Ft 6000 Cubic Gondola HS - NMPX/ Niagara Metals #2370
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
RS-18u, DCC & Sound - Ontario Southland #182
Era:2006-Present
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
HO Scale 80s GMC Brigadier Dump Truck Kit
This 1980s Era GMC is ready for your material moving needs. Precision cast pewter wheels, tires and details combined with a resin cab and dump bed are designed for easy assembly and painting. Clear parts enhance the finished model. Windshield panels are laser cut and the kit includes photo-etch details. Put this short hood 9500 muscle to work delivering bulk material on your pike. Detailed instructions can be viewed by visiting the Showcaseminiatures.net website
HO EMD SW9 - DC/ Silent - Canadian Pacific (CP Block Scheme) #7400
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Canadian Pacific:
Delivered in 1953 / GMDD
Short side handrails
Small number boards next to the headlight
Large barrel style headlight
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO 1950s Sedan - Taxi, City Cab Company
MODEL FEATURES:
- Factory assembled with detail parts applied
- Molded interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
- Beacon or taxi sign where appropriate
85ft General American G85 Flatcar - Trailer Train - GTTX - Brown #300338
Product Information:
Limited edition - one time run of these road numbers
Prototypes handled trailers and containers from 1961 to mid-1980s - used for general service loading into the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in up or down position or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
33In turned metal wheelsets
Proto MAX metal knuckle couplers
Add more realism in minutes with SceneMaster trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24In
C-27 ICC Caboose w/Tsunami Sound & Lights - B&O/Chessie System #C-3771
The ultimate detail with the best Genesis features.
International Car Co. began specializing in caboose production as early as 1941. When the railroads entered the 1960s, many needed to replace their aging, in some cases home shop built, cabooses. International Car responded with a product that could be tailored to each railroads specific needs. Using quality components and modern engineering, ICC became a leading name within the industry.
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
ICC CABOOSE FEATURES:
- Better than brass detail including roadname and road number specific detail Laser-Sharp Painting and Printing
- Interior seating for the addition of crew figures.
- See-through End Platforms and Steps
- Flush Window Glazing
- Wire-form Grab Irons
- Caboose trucks with animated rotating bearing or static friction bearing caps
- Axle Generator Details
- Body-Mounted McHenry® scale knuckle-spring Couplers
- Machined Metal RP25 Profile Wheel Sets
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Separate wireform grab irons, etched metal coupler platforms
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for trouble-free operation
- Window packaging for easy viewing, plus interior plastic blister safely holds the model for convenient storage
- Multiple road numbers
- Minimum radius: 18in
LED LIGHT EQUIPPED FEATURES:
- LED lighting for long life and reliable operation
- On-board DCC Decoder by NCE
- Operates in DCC and Analog (DC) with lighting Functions Controllable in DCC
- Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
- LED Interior Lights
- All functions NMRA compatible in DCC mode
SOUND EQUIPPED MODELS ALSO FEATURE:
- Soundtraxx Tsunami SoundCar decoder w/ included sounds:
- Air horn or conductors whistle as appropriate
- Clickety-clack with optional wheel flat spot sounds
- Brake set/release sounds including retainers and brake squeal
- Big Hole emergency brake application sound
- Handbrake tie-down/release
- Adjustable flange squeal
- Air, horn, and bell sounds work seamlessly with Soundtraxx locomotive sound decoders
- Supports Advanced Consisting in DCC
- Full DCC functions available when operated in DCC mode
- All functions NMRA compatible in DCC mode
B&O CHESSIE FEATURES:
- Brand NEW ICC B&O Style body
- Angled window screens
- Early style axle-driven generator
- Caboose trucks with roller bearing caps
- Ash pans
- Toilet Drain
- Illuminated marker lights, where appropriate
- Reflectors on end cages
- Overhanging, diagonal-panel roof with or without blank panel at smoke jack per prototype
- Overhanging, x-panel roof for the B&O Chessie caboose
Chessie #3835, #3887, #3915 features: First time ever C26A version. Dayco axle generator with notched undeframe.
Chessie C-3771 Gold Caboose - Unique safety slogan and Gold and Silver Paint
Evergreen Scale Models - Opaque White Polystyrene Rectangular Tubing .250In x .375In x 14In (2 pcs pkg)
HO 26Ft Can-Car Dry-Van Trailer w/ Side Door - CN Piggyback #260109
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
HO Scale SD30C-ECO - DCC & Sound - Canadian Pacific #5017
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
HO 53ft Jindo Container - Ferromex Set #1 (3pk)
(#232565, 232588, 232593) (GRAY/RED)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting
HO GE Dash 9-40CW - DC/DCC Ready - Norfolk Southern NS #9773
NS FEATURES:
Front and rear ditch lights (Alternately flash in DCC mode)
High-mounted head light and number boards
K5 horn
Electronic brakes
Graham White Electronic bell
Delivered new in 2003 from GE, NS took delivery of class 9745-9811 Dash 9-40CW locomotives. Some unique features include: electronic bell, high mounted headlight, and electronic parking brake. We are offering both versions of the front cab schemes to choose from!
ROAD NUMBER SPECIFIC FEATURES:
#9754 -White face- scheme
#9773 -Unibrow- scheme
#9806 -Unibrow- scheme
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO 85ft General American G85 Flatcar - Pacific Fruit Express #835202
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
HO Trinity 3-Bay Hopper - DM&E (3pk) #1
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO NSC 64 Ft 6000 Cubic Gondola HS - IZYR (IZZY) #2017
In honor of co-founder Cheryl Ann James, a portion of the proceeds from the sales of this car will be donated to Breast Cancer research.
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - TROX #3548
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Straight-Edged Gray Paint Out Blanks
Decal set with a variety of shapes and sizes of blank paint patches in 5 colors.
These gray tones include:
-White
-Light Gray
-Light Ghost Gray
-Medium Gray
-Gunship Gray
HO NSC 64 Ft 6000 Cubic Gondola HS - TLPX/ Triple M Metals #2235
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO 1976 Chevy Stepside Pickup - Midnight Black
This pickup is perfect for North American street and highway scenes. This detailed truck features a die cast metal body, interior seats, window glazing and authentic decoration. Perfect for rural scenes or carting loads around town, this truck is a great addition to any 1970s and later layout scene.
HO RTR PS 4740 Covered Hopper - MKT #4367
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Body-mounted McHenry operating scale knuckle couplers
36inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Multi-packs feature unique road numbers
Weighted for optimum performance
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
HO 50Ft PCF B70 Boxcar - w/ Superior Doors - SSW/Cotton Belt #67198
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
HO Norfolk Southern G41A Repaint 1976 w/o Hoods PRR Shops G41A Coil Car
NS GP67 Repaint 2005+ is an exciting release for us. NS rebuilt some of their G41A cars around 2000 and placed them in the GP67 class. These rebuilds were changed from 6 troughs to 5 troughs to accommodate larger diameter coils. This major change, along with yellow trough bracing, makes these cars really stand out in the crowd. The Tangent offering picks up in 2005+, where the NS cars have received their conspicuity stripes. The troughs received not-so-subtle wide white stripes down the centerline of the car to assist loading. If you read the data carefully, you will find accurate 50 Year Life Extension stenciling and painted diamonds labeling the cars for HOT steel coil service. The 125-Ton trucks feature NS reporting mark and car numbers along with 38in wheels and rotating Timken caps. These are some HOT cars for the modern era.
SPECIFICATIONS:
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
HO F30A 50Ft Flat Car w/Sleeper Van - Norfolk Southern (NS MOW) #62647
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
Rapidos F30 Camp Cars Feature
All-new camp trailer loads in four styles
End railings and platforms
Photetched details
Multiple car numbers per scheme
Model Railroad Reference Book - 2024 - 2025 Edition
Get your modeling projects on track with a copy of the 2024-2025 Model Railroad Reference Book! Now in stock, order yours now!
Updated from cover to cover, you will find the latest new product announcements, information and updated listings for hundreds of products in HO, N and Z Scales. Packed with modeling tips, ideas and inspiration in one handy resource, be sure you have copies for your modeling library and your workbench too!
HO Modern Brake Wheels for Freight Cars (8/pkg)
HO Evans 53Ft Double Plug-Door Boxcar - British Columbia #800507
Features:
70-ton roller-bearing trucks
Blackened metal wheels
Two-piece underframe
Separate brake cylinder
Air reservoir
End platforms
AccuMate couplers
AccuMate couplers are made under license from AccuRail, Inc.
70 Ton Hopper Canada Southern
Ready to Run
Crisp details and sharp painting and printing
Metal wheels
Knuckle couplers
N Scale Curved Single Track Viaduct - R315-45V (R 12 3/8inch-45) - 2pkg
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated.
Theres no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and youre ready to go.
HO UAC TurboTrain Additional Coach: Early Amtrak
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model.
DN163K0A Designed to fit the Kato N scale Designed to fit the Kato N scale P-42, PA-1 PB-1 & E-8/9A, E-8/9B
Golden-White LEDs for added realism
Decoder Lock equipped
Features:
this is a full function fx3 type decoder. Easy 5-10 minute installation requiring only a screwdriver and 2 wires to be attached (soldered)
Decoder Lock equipped
Current Rating 1.0 Amp (1.5 Amps Peak)
Size 12mm x 55mm x 2.5mm
Installation Board replacement decoder
Function Outputs 6-500mA
Function Type FX3
Features Series 3
HO 1958 Cu Ft 2 Bay Hopper
D&RGW #18416
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
70 Ton Hopper Canada Southern
Ready to Run
Crisp details and sharp painting and printing
Metal wheels
Knuckle couplers
HO Value Line RTR - 13 Panel Coalporter - Conrail #503094
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
N Scale Just Plug Lighted Vehicle - Comfy Cruise
This cruiser will take every opportunity to hit the blacktop, whether you are going for a scenic drive or a city run!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic. Add a vehicle to a Just Plug light hub for easy installation. Just plug and you are done!
20mA per Vehicle
Evergreen Scale Models - Opaque White Polystyrene T Shape .092In x 14In (4 pcs pkg)
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504969
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
HO GMD-1 - DCC & Sound - Canadian National (1400s Stripes) #1422
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
N Scale KW Type Tri-Axle w/33 Ton Cap. Boom Crane
Sometimes you just need a Hoss for real muscle.... and since Hoss is pretty much a southeastern term, here is a definition: one who is a beast who can basically do anything he wants. He could break anyone or anything in half. Hoss is a compliment!--- Customize it! --- With our Grilles & Headache racks, Side View Mirrors, Heavy Duty Tri-Axle Wheel Sets, Mud Flaps and Light Bars, and Undercarriage Accessories sets
Spray Can - Gold (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Code 83 Nickel Silver Flex Track with Wood Ties - Each section: 36In 91.4cm pkg(5)
Product Information
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 83 rail! Combining great looks and great performance in a complete system, each item comes fully assembled and features:
Ties molded in realistic dark brown with enhanced wood grain detail
Fine profile molded spike and tie plate details on each tie
Spike-mounting holes positioned next to the rail
Molded starter points on underside of ties for fasteners
Custom formulated nickel silver rail for outstanding electrical conductivity
HO EMD SD9 - DCC & Sound - Burlington Northern #6237
Burlington Northern
- Former CBQ units (Phase IV, first time for a plastic model!)
- Correct 5-step, BN walkway
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO Code 83 Snap Track - 15 Inches Radius Curve
Brown Tie, nickel silver rail.
Pricing is per single piece.
All Atlas code 83 track has brown ties and nickel silver rail.
12 pcs. to circle
HO GE Dash 9-44CW - DC/DCC Ready - Burlington Northern Santa Fe (BNSF Wedge) #4484
BNSF FEATURES:
High-mounted number boards
K3 horn
Front ditch lights
ATSF -Gullwing- cab
Standard brass bell
Part of BNSFs order in 1999, these were originally painted in the -Heritage 2- scheme from the factory. Over time with normal wear and tear, these units paint began to fade. As they got outshopped for major repairs, some were repainted into BNSFs current -Wedge- scheme. It was also common to see different variations of paint and parts used. Air conditioners and antennas were commonly changed out over time as seen on other equipment. We offer these variations based on collected research photos.
ROAD NUMBER SPECIFIC FEATURES:
#4433 Standard large dome antenna
#4437 Large dome antenna with dual -Skate- style antennas
#4484 Standard large dome antenna
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO RTR 48Ft Husky Stack Wellcar - NWCX #981
Detailed Information
MODEL FEATURES - 48Ft HUSKY STACK WELL CAR:
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
48Ft well cabable of carrying 20Ft - 48Ft containers on the bottom and up to 53Ft containers on top
Acrylic Flat Colors - Yellow Green - 3/4oz (23mL) Bottle
XF-4
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Seaboard Air Line #19761
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO EMD GP40 - DCC Ready - SSW/ Cotton Belt #7604
1966+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO RTR ACF 4650 3-Bay Hopper - Lincoln Grain #1080
Date: NEW 10-80
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO Scale G2 AC4400CW - DCC Ready - Southern Pacific #336
Detailed Information
SP FEATURES:
Nathan P-3 Horn
High number boards
Early body features
Unevenly spaced rear grab irons
Central air intake in forward position
Early no-notch bolted on fuel tank
Extended radiator hatch on engineers side
Prime Air Dryer
Vertical handrail behind invertor cabinet
GE Hi-Adhesion trucks
Modified outside struts on opposite sides of trucks
Alternating flash front ditch lights (Effect in DCC)
Built between April and Nov of 1995, SP placed an order for 279 AC4400CWs from General Electric. Not only was this SPs first dive into AC technology but was their largest single locomotive order (and last) in history. GE set up a maintenance shop in Denver CO to support these units. They featured Harris Locotrol II equipment for use in DPU service; although they were used for dedicated power on Colorado coal trains, they could also be found roaming the system wherever they were needed
ROAD NUMBER SPECIFIC FEATURES:
#114
Unique spare knuckle box on rear pilot
#239
Unique spare knuckle box on rear pilot
#336
Unique additional handrail above capacitor box
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO 60ft Bulkhead Flatcar - PGE #16021
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
HO Curved Track - 22.5 Degrees - 16-7/8 Inch Radius (4pk)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes. Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation! Suitable for all types of layouts, whether temporary or permanent. This modular track system features an integrally molded roadbed for realistic appearance. Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
HO Scale H1a Hudson Steam - DC/DCC Ready - Canadian Pacific (Beaver Shield) #2804
-Late walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
Universal Cable Connector
For Use with HO, N, and O signals
Golden West - INTX #74319 (blue car, red & yellow lettering, patch)
These all-new HO models include etched-metal, see-through roofwalks, detailed brake gear, authentic 100-ton roller bearing trucks with blackened metal wheels and body-mounted Accumate(R) couplers with screw-attached coupler pockets. Undecorated models come with optional parts for three different types of loading hatches and two styles of discharge outlets. Decorated models come prepainted and lettered in a variety of railroad-owned schemes with details appropriate for the late (post-1971) production.
60ft Pullman-Standard Flatcar - Ready to Run -- TTX VTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Cornerstone Aggregate Bins - Kit - colour Grey
Kit - 4-7/8 x 2-7/16 x 6-1/8inch 12.3 x 6.1 x 15.5cm
Bulk loader speeds operations at all types of industries
Used for sand, gravel, coal, woodchips and more
Perfect for railcar and or truck loading
Simulated metal construction
Molded in light gray
Overhead clearance below bin 2-3/16 inches 5.5cm
HO H-6-G - DC/Silent - Canadian National Railway (Straight Wafer) #1389
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low profile? Barber S-2-A with Timken rotating caps
Wheels: CNC-Machined 36in Wheels
Detroit Toledo & Ironton (DTI) Delivery 1970 Magenta shows off one of the most-requested paint schemes for the Tangent Greenville 86ft Box Car System. We appreciate the patience of DT&I modelers, as we wanted to get this car right with the correct 1970 Greenville body with accurate DT&I Magenta paint and lettering. This Magenta DT&I group totaled 54 cars ? It was also the first group to be delivered for use in the new Ford Brownstown Parts Distribution facility pool. Yes, these cars were pooled, so that means these beautiful Magenta 86ft giants served Ford US Parts Depots coast to coast in the Ford BRO pool lanes. Note the prototype photo on our website that shows a DT&I BRO car behind a GN painted, BN-restenciled SD45 presumably photographed on BN headed to Seattle. The DT&I cars feature the distinctive Brownstown body style, with extra vertical rivet rows at the ends of the side sheets. An accurate End-Of-Car Cushioning underframe shows off the 100-Ton Low profile Barber S-2-A trucks, 36in wheels and Timken rotating caps.
Yellow
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Positionable Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
HO 70-Ton Covered Hopper - Soo Line - #8908
FEATURES:
- Crisp details
- Sharp painting and printing
- Metal wheels
- Knuckle couplers
N Great Lakes Diesel tug - Unpainted Resin Kit
HO 50ft Evans DD Plug Boxcar - C&NW #600568
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - CIL Monon #9021
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Aunt Lucys House - Kit
DIMENSIONS:
4 x 5-3/4 x 5-1/8 inches (10.2 x 14.6 x 13cm)
FEATURES:
- Walls and trim molded in two realistic colors as one complete part
- LED interior lighting kit included
- Simple snap-together assembly with minimal gluing
- Window mullions molded into glass for true-to-scale look
- Finely detailed railings and eaves
- Full-color printed drapes and window detail sheet
- Molded in three realistic colors and clear plastic
HO Dash 9-44CW - DCC/Sound - KCS #4404
KCS FEATURES:
- Unique art per road number
- Clean patched areas where former BNSF logos resided
- K3LA Horn
ROAD NUMBER SPECIFIC FEATURES:
#4404
- Silver replacement horn
- faded stripes on the engine compartment
#4430
- PTC antennas
- replacement air conditioner from a Santa Fe Superfleet unit
DASH 9-44CW SERIES LOCOMOTIVE FEATURES:
- Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
- Etched, see-through walkway steps
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
HO 53ft Railgon Gondola - CSX #484446
(black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO End-of-Track Bumper - Unpainted Metal (1)
HO 60ft Hi-Cube Plate F Boxcar - Union Pacific #961579
Bring your freight car fleet up to date in minutes with the Walthers Mainline(R) 60ft Hi-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft Hi-Cube Plate F Boxcar include:
-Limited edition - one time run of these roadnumbers
-Prototypes now in service with TTX and several railroads
-Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
-Prototypically correct roof with both X and diagonal panels
-Separately applied latch bars
-Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
-100-ton roller bearing trucks
-36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
Juneco Scale Models CN, CP & GTW S-2, S-3, S-4 Diesel Exhaust Stack
Eight different door variations tooled: molded as appropriate.
IBC(Inter-Box Connecting pins) in scale ISO locations
JTC Magnetic connecting system: 1-magnet bottom & metal top plate
Detailed printing as per photographs
Models come in packages of TWO, unless noted otherwise.
The IBC pins Mate with JTC 40ft open top containers with Magnets, JTC 20ft containers with Magnets; JTC 48ft & 53ft containers, Atlas 40ft & 45ft containers, and future Jacksonville Terminal Company containers.
Compatible with JTC Retro-fit underframe kits to stack M-T and S-T brand containers on top.
HO GE 44 Tonner Phase Ic - DC/DCC/Sound - Southern Pacific (Tiger Stripe) #1902
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
HO AutoFlood III RD Coal Hopper - GLFX #8121
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OFOX (6 pkg) #1
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
1720
1774
1799
1838
1860
1866
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO FGE 57Ft Mechanical Reefer - DCC Ready - SFLC #2480
Detailed Information
57Ft MECHANICAL REEFER FEATURES:
Available with onboard SoundTraxx sound
Scaled from prototype manufacturers drawings and field measurements
Repaints often vary by road number in the size and style of the reporting marks, car numbers and patch shapes
See-through protective screens on the genset end
Detroit Diesel 2-71 Genset visible inside
End wall corrugation visible inside
Inner refrigerator bulkhead
See through end platforms
Two different exhaust stack types: straight pipe with -flapper- or T-shaped -smokejack- per prototype and era
Full underframe detail including Keystone cushioning, air brake reservoir, control valve, brake cylinder, brake plumbing, and fuel tank
Factory applied end ladders and door closure rods
Trainline hoses with silver ends
Three different coupler cut lever styles per prototype
Body-mounted or truck-mounted brakes per prototype
McHenry operating scale knuckle couplers
100-ton roller bearing trucks with rotating bearing caps
Fully-assembled and ready-to-run
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Machined metal wheels with RP25 contours
Weighted for trouble-free operation
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
All Scale Classic Trees - Ready Made - Blue Needle 2-1/2-4inch (5 pkg)
3 to 4inch, 7.6 to 10.1cm Tall
Product Information
Make Realistic Scenery in Minutes
Give your layout a change of scenery with Woodland Classic Trees from Woodland Scenics. Fully assembled and ideal for foreground detail, the selection includes several types of trees along with hedgerows. The models are finely detailed with painted, flexible trunks and foliage with natural contrast to enhance any layout or diorama. A unique planting pin and detachable base allow for temporary placement, or ease of removal for cleaning and maintenance. Easily mixed and matched to capture the variety found in nature, trees range from 3/4 to 9inch tall, making them ideal for modelers in all popular scales.
HO FMC 5077 SSD Boxcar - Railbox #18033
MASTER MODEL FEATURES:
- Single or Double Sliding Door where appropriate
- Multiple body styles
- Metal knuckle couplers
- Plate B Box Car
- X-Panel Roof
HO RTR 40Ft Single-Door Steel Boxcar - Delaware & Hudson (Bridge Line Logo) #19688
(yellow, blue)
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. Check out the entire line of Bowser HO Scale ready-to-run boxcars.
Kit - 33-1/2 x 3 x 11 inches 83.7 x 7.5 x 27.5cm
Part of the new Cornerstone Engineered Bridge System
For more information about the Cornerstone Engineered Bridge System click here
Prototypes provide maximum clearance for vessels on busy waterways
Low-speed motor & gear drive included
Add to new or existing scenery with Single-Track Railroad Bridge Concrete Abutments (#933-4551, sold separately)
Use with Walthers Code 83 Bridge Track (948-886, sold separately)
Has clearance for todays taller equipment
Authentic trusses, chords, counterweight & other details
Bridge tenders shanty & interlocking tower
Molded in two colors and clear plastic
HO 55Ft Evans 4780 Covered Hopper - ADM (UELX) #60120
Product Information
Expand grain traffic along your HO railroad with a fleet of WalthersProto 55ft Evans 4780 Covered Hoppers! Introduced in 1977 and still going strong today, they can be found handling all types of grains and dried distillers grains used for animal feed. Fully assembled and ready for service, features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint and lettering
Ultra-smooth rolling 36inch RP-25 turned wheelsets
Proto MAX(TM) metal knuckle couplers
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Lackawanna (DL&W Phoebe Show) (6pkg)
6-Pack includes the following numbers, all individually packaged: #51003, #51012, #51028, #51104, #51212, #51383
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Erie Lackawanna
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
HO 50ft Ext-Post Hi-Cube Plug Boxcar - AOK #14142
MODEL FEATURES:
- Separately applied brake wheel and stirrups
- Highly-detailed, injection-molded body
- Metal wheels with RP25 contours operate on all popular brands of track
- Minimum radius: 18 inches
HO GP50 - DCC & Sound - Norfolk Southern #7085
Detailed Information
NS FEATURES:
Phase I Body with rounded blower housing
Long hood forward setup with high short hood
Southern style 5-chime horns on both ends
Long hood mounted bell
Dual Firecracker antennas
Timkin bearing trucks
Hood mounted walkway lights (non-operational)
Large EMD style plows and ditch lights on both ends
Built in 1980 for the Southern Railway, these distinct high nose long hood forward locomotives were painted into Norfolk Southern colors after the Southern / Norfolk Western merger of 1982. They retained most of the as built features other than ditch lights added in the 1990s.
ROAD NUMBER SPECIFIC FEATURES:
#7037
Earlier NS scheme with dashed frame stripes
#7054
Newer NS -horse-head- logo with solid frame stripes
#7085
Earlier NS scheme with solid frame stripes
GP50 LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Walkway tread
Lift rings
Sander lines
Windshield wipers
McHenry scale knuckle couplers - Kadee compatible
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Pennsylvania Rack, Trailer Train Flatcar (TTBX) #930009
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
60ft Pullman-Standard Flatcar - Ready to Run -- TTX VTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
EJ&E #90426
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied wire grab irons
Working drop ends. Gently lift up & push inward to fold ends down.
Interior detailing
Weighted for trouble free operation
Machined metal wheels and RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
HO 50ft Covered Gondola - Southern #2218
MODEL FEATURES:
- 70-ton Roller Bearing trucks
- Removable cover
- Separately-applied brake wheel
- Weighted for optimum performance
- 33 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Body-mounted McHenry operating scale knuckle couplers
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inch
PROTOTYPE AND BACKGROUND INFO:
Gondolas are low-sided railroad cars that are used for hauling bulky loads that don not need protection from the weather. The Roundhouse 50ft gondola is representative of larger cars that began appearing on the rails in the early 1950s, and many survive today working for modern roads and contractors.
HO Steam Engine Bell w/Bracket (Brass Casting) - Standard Rope Pull Type
Plastruct 91364 Tinted Mirrored Sheet - Smoke (2pcs pkg)
100x300x1mm
EMD E8A (DC/DCC/Sound): VIA Rail Canada #1898
Otter Valley Exclusive!!
HO Platforms and Stairways - Photo-Etched Brass Kit
Product Information
Upgrade your modern HO Scale industries with the Walthers Cornerstone Platforms and Stairways set of photo-etched brass walkways and work platforms. Designed for easy construction, simply cut, fold and glue. Includes illustrated instructions and features near-scale railings, platforms and open stairways to upgrade your industrial buildings or replace oversize components. The Platforms and Stairways kit can be used on many Cornerstone HO Scale industrial buildings.
Modernize any industry in minutes - great for kitbashing and customizing!
Near-scale railings and platforms
Fine handrails and trusses
Open stairways
Raised tread detail
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - KRRX #4719
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
DT&I #1614
Bowser ready-to-run 70-Ton Offset Hoppers are based on typical cars used across the continent for hauling coal and aggregates. Layout-ready cars feature accurate decoration, molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton Offset Hopper is a great addition to your transition or classic diesel-era car fleet.
Excel Hobby 20004 - Assorted Blade 5pk
Excel 20004
5 per package
For chiseling, scoring and carving wood, plastic, paper and leather and all other general purposes
Set includes; one #2 straight edge blade, one #19 sharp edge angled blade, one #22 curved edge blade, and two #24 deburring blades
Compare to X-ACTO X232 #2 Heavy-Duty Blade Assortment, which is no longer manufactured by X-ACTO
Fits Excel K2, K5, K6 and X-Acto Type B or C handles; not included
Also Fits Fiskars 165100 Heavy-duty Easy Change Knife; not included
Made in USA
0.023 inch Thick Stainless Steel Flat Strip - 1/2inch x 12inch
Stainless Steel Flat Strip 12inch Long (1 pc)
HO Large Farm Trailer - Kit
Product Information
Make quick work of all kinds of jobs around your contemporary HO farm with the Scenemaster Large Farm Trailer kit. Designed for easy construction with parts molded in colors, put your finished model to work behind most farm tractors, available separately.
Van Hool TDX Double Decker Bus - Tornado
Diecast metal
Limited edition!
HO GP40 - Gold DCC & Sound - CSX (MOW) #9709
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
HO GE U25B Low Hood - DC Silent - Penn Central #2667
The HO scale U25B Locomotive features:
Phase I, II & III units represented in 1st run. (Phase IV & other units will come with future runs)
Single-window style for low nose units. (Double-window in future runs)
Both low- & high-short hood versions
Early high- & later low-style side doors.
Road specific details for each model
Working step lights on low-short hood models
Different roadname-specific exhaust stacks
Roadname-specific battery box doors on engineers side
Roadname-specific air cleaner boxes on rear
Working inspection lights on all units
Lighted control stand inside cab
Different types of fuel & air tanks, as appropriate
HO 70 Ton 13 Panel 3-Bay Hopper Car - Pennsylvania (H37B w/ Crown Trucks) #272263
Ready to Run.
Features:
Crisp details and sharp painting and printing,
metal wheels and knuckle couplers
1st time offered with the correct Trucks
Bi-Level Auto Racks - BNSF Rack & Flat Car - Circle Logo #300118
HO Value Line RTR - 13 Panel Coalporter - Conrail Quality #505415
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
#143 Standard Head All-Metal Whisker(R) Self-Centering Knuckle Couplers Short Centerset Shank 2 Pair
All-metal -whisker- coupler with metal self-centering spring. Designed and tested for reliability, durability and long life. Compatible with Kadee HO couplers. Fits most HO scale equipment; can be used in place of No. 5 coupler.
Cushion Underframe Coupler Lift Bars - Type 1 - 4 Pairs
This parts package includes four pairs of unpainted Tangent Scale Models etched metal coupler lift bars for cars with cushion draft gear.
While the shape of lift bars can change from car to car, these coupler lift bars are used on our PRR Shops X58 box car and are potentially suitable for any model. These are great parts to have on hand!
Vallejo 73801 - Model Wash - Weathering FX - Industrial Thick Mud - 40mL Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Blue Grey is recommended for vehicles with a Panzer Grey base color, as well as all vehicles with a similar grey base.
HO Gunderson 6276 50Ft Plate F Boxcar - COER #101563
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
OVR Exclusive - HO Bi-Level Auto Rack - Canadian National/TTGX #702477
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
89ft Thrall Bi-Level Auto Carrier - Ready To Run - Milwaukee Road Rack, TTGX Flatcar #910250
(yellow, silver; yellow Flat)
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6inch (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
Factory-installed grab irons
Separately-applied ladders and brake equipment
Ultra-smooth rolling metal axles with 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24inch radius is recommended for operation.
Spray Can - Camel Yellow (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Conrail (CR) G41A Repaint 1976 w/o Hoods PRR Shops G41A Coil Car
CR G41A Repaint 1976 w/oHoods illustrates an early CR repaint. Check out the thinner style CR logos, PC/CR style data stencils, and era appropriate ACI and PC/CR style double COTS. The early CR cars maintained their hoods for protection of the coil shipments. If you want to model the car later in their service lives, do not panic: The hoods are removeable. The interior troughs have all of that loading and identification data, too. The ends feature the original shorter style coupler lift bar brackets and Morton style crossover platforms. The 125-Ton trucks feature rotating Timken caps, 38in wheels and accurate brake beams with truck mounted brake details.
Also, these cars look great loaded with our all-new coil loads sold separately!
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
N Scale NSC 64 Ft 6000 Cubic Gondola HS - TLPX #2235
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO GMD SD40-2W - DCC & Sound - Canadian National (Sergeant Stripes) #5336
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. DCC with Sound version features LokSound V5 decoder.
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
Rapido 753105 - HO New Look Bus - Rapido Trains via Express - Deluxe #1029
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
50Ft Berwick Box Car - Grand Trunk Western #309361
MODEL FEATURES:
Ready-To-Run
Full under body detail with brake rigging
Overhanging X-panel roof
Non-terminating sine wave ends
Separately applied wire grabs
Detailed end ladders and brake gear
Accurate painting and printing
Blackened metal wheels
AccuMate couplers
HO EMD SD7 - DCC & Sound - Rio Grande (Bumble Bee) #5304
Denver & Rio Grande Western
- Correctly replicated side sill reflectors
- Short hood forward operation
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Tangent Scale Models HO Greenville 86ft Quad Door Boxcar - PC- Delivery X-60-R 2-1970
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Penn Central (PC) -Delivery X-60-R 2-1970- offers another big paint scheme for our customers. A big PC logo dominates the center of these cars, with a stacked Penn Central on the far left. Fans of the Penn Central expect the best from Tangent, and we aim to deliver just that. This 1970-built Greenville group features accurate End-of-Car Cushioning details, Gypsum crossover platforms and truck mounted brake hardware. This X-60-R order rides on 70-Ton Barber S-2 Birdsboro Roller Bearing Trucks, with 33in wheels and accurate rotating Brenco-6 roller bearing caps. These cars were part of the GM Lansing Stamping Plant car pool, with a return-when-empty stencil the GTW in Lansing, Michigan. These beauties are available with eight different road numbers!
HO 68Ft Railgon Gondola - Southern Pacific #365190
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
6mm Static Grass - Spring Grass (20g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
HO Dash 8-40CM - DCC Ready - BCR: Faded Red/White/Blue #4620 - OVR Exclusive
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Minneapolis & St. Louis (M&StL Red) #54668
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
N Scale PS 4427 Covered Hopper - Milwaukee MILW #97602
MODEL FEATURES:
- Body-mounted McHenry knuckle spring couplers installed
- Screw mounted trucks for accurate tracking
- Roller bearing trucks
- 36 inch machined metal wheels and RP25 contours
- Operates on Code 55 and 80 rail
- Weighted for optimum performance
- Packed in a jewel box for great display and storage opportunities
- Razor sharp painting and printing
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
B-100-40 Boxcar: SP/UP Shield Repaint - Single Car #656319
Detail Variations:
6-pack includes the following numbers:
#656293
#656318
#656319
#656389
#TBA
#TBA
Our B-100-40 model features the following details:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Genuine Kadee #158 Whisker couplers
Newly tooled trucks with turned metal 36 Inch wheels
Separate door rods and door tracks
Road number specific number patches
Separately applied coupler cut levers
HO RTR 68Ft Railgon Gondola - Canadian Pacific #355108
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO Union X-3 Tankcar - UTLX (1930s Paint) (6 pkg) #1
Detail Variations:
Equipped with KC brakes
6-pack includes the following numbers, all individually packaged:
#32082
#32073
#32167
#32561
#32679
#32792
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO 40Ft Boxcar w/ Early Improved Dreadnaught Ends - Great Northern (Chinese Red) #21799
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
HO Small Cut Stone Culverts w/ Wings - Kit
The Rix Cut Stone Culverts are available in two stone sizes. (small stone shown) These Cut Stone Culverts can be used in a variety of scales. The Cut Stone Culvert measures 5-1/2 inches wide by 3 inches tall. The Arch opening is 2-3/4 inches by 2-1/8 inches tall. The wings measure 3 X 3 inches making the total length 11-1/2 inches long. The smaller scales (N and Z) can use the Cut Stone Culvert as a tunnel portal. The Rix Cut Stone Culverts are molded in gray plastics. Kit?s include 2 Cut Stone Culvert and 4 Cut Stone Wings. (1 pair)
N Scale 1976 Buick Estate Wagon - Liberty White (2/pkg)
Input Interconnect Board for DS74
FEATURES:
- Input interconnect board for DS74.
- Provides plug and play connectivity for DS74 inputs.
- Supplied with ribbon cable to plug into DS74 10 pin Input header.
- Allows plug-in of up to 4 DSXCP1 fascia controls.
- Direct ribbon cable plug-in header to BD4N detectors.
- 8 pin screw terminal plug for optional wire access to 8 input lines.
N Scale Flexible Roadway - Highway (100 x 4.8cm)
(divided into 2 rolls)
Pre-colored, self-adhesive material in a variety of authentic colors and surfaces to create custom roads.
Approx. 3-1/4 feet long.
N Scale Pedestal Traffic Lights - Just Plug Lighting - pkg(4)
Product Information
Woodland Scenics N Scale Just Plug Traffic Lights are ready to place right out of the package and come hand-painted and authentically weathered. The Traffic Lights are pre-wired and made for use with the Just Plug Lighting System. Whether at rural intersections or on busy city streets, they add action to any scene. Check out the entire N Scale Just Plug line of lighting and accessories.
Pedestal Traffic Lights are ideal for busy intersections on downtown or suburban streets. Pedestal Traffic Lights are single-faced and the package includes two red lights and two green lights, enough for one four-way intersection.
N Scale Single-Track Curved Viaduct - R249-45 (R 9-13/16in-45)(2/pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO Stirrup Steps (Style A) - 25pcs
Repair or update your entire freight car fleet quickly and easily with formed brass HO Scale A-Line Stirrup Steps. Available in three styles, they offer the perfect balance between prototypical appearance and durability on virtually any freight car.
HO 1955 Ford F-100 Pickup - Southern Railway #SE-61
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Rubber tires
HO 50ft PC&F, 8ft & 6ft Boxcar - SSW/GWS #27377
MODEL FEATURES:
- Separate wireform grab irons, etched metal coupler platforms, and/or etched metal roofwalk
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- Weighted for optimum performance
- Separately applied wire grab irons where applicable
- Trucks with animated rotating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Body-mounted, McHenry scale double-shelf knuckle couplers
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
- Minimum radius: 18 inches
- Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
Navy Blue
Seal your base and add color all at once! Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Undercoat lays a base for creating dark depths to shallow shorelines, and underwater scenes for any aquatic ecosystem. Create customized colors by mixing Water Undercoat together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Tangent Scale Models HO Greenville 86ft Boxcar CSX
CSX -Repaint 1991+ leads off this release, offering examples of repaints from B&Os first order of cars in 1969. Applying CSX paint to a Tangent replica is not a walk in the park ? It is all about the big AND little details. This car features the large CSX logo on the center of the sides and accurate Ease up! stickers on the corners. Apparently, the more the better, since CSX also applied tiny Ease up! stickers on each door. Yes, we have faithfully reproduced this extraordinarily small detail. Get out your magnifying glass if you want to read the CSX Quality Check oval sticker applied above the COTS by Grand Rapids employees. This Greenville car features Morton style crossover platforms, an Ajax hand brake housing, accurate End-of-Car Cushioning details with truck mounted brake hardware, and 70-Ton Barber S-2 Trucks with 33in wheels and accurate Timken roller bearing caps. Check out the CSX-specific modern features in this release, including the large tack board mounting location on the door and the single and double third arms on the top door tracks. We are now offering CSX in six different numbers!
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Stoddarts Ltd. - 3D Railroad Wall Artwork - Reading Lines Logo
HO F89-F89ft 8in TOFC Flatcar - XTTX #153135
MODEL FEATURES:
- Die-cast underframe
- Weighted for trouble free operation
- Raised and lowered hitches included
- Use for dedicated intermodal trains or mixed freight
- Detailed deck
- Wire formed brake plumbing
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Separately applied wire grab irons on and ladders
- Separately applied brake ratchet
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Machined metal wheels
- Wheels with RP25 contours operate on Code 55, 70, 75, 80, 83, and 100 rail
- Body mounted McHenry operating scale knuckle couplers
- Minimum radius: 22 inches
- Recommended radius: 24 inches +
- XTTX version: cars have 4 hitches to handle different trailer lengths. Extra raised and collapsed hitches included to model any configuration.
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Gray
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
HO Scale GP38 - DC/DCC Ready - Norfolk Southern (High Nose w/ Ditch Lights) #2768
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO EMD SD9 - DCC & Sound - Chicago & North Western #6603
Chicago & North Western
- Rebuilt at the Oelwein Shops with chopped down nose - a first in HO Scale!
- Modified panels on side sills of locomotive
- Modified/plated over details of dynamic brake blister (Smooth plating over where grilles once were)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!