RSC-14, DCC & Sound - Canadian National, Stripes #1759
Era:1975 - early 1990s
The Rapido Trains RSC-14 features include:
-Accurately designed using a 3D sscan of a real RS-18 and accurate measurements of real A-1-A trucks
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, bi-colour class lights and illuminated cab control stand
-Roadnumber-specific intercooler detail
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail incl. traction motor cables and other piping, re-railer and other parts.
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels.
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC/Silent(21-pin DCC Ready) or DC/DCC/Sound(ESU LokSound) options
-Accurate recordings from a real ALCo 251B prime mover under load.
HO H-6-G - DC/Silent - Canadian National Railway (Straight Wafer) #1371
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
All-New bluetooth controlled Tsunami2 DCC Sound Decoder - EMD-2 Diesel Locomotives
Blunami will change the way you enjoy the model railroading hobby
The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.
Currently the app is only available for Apple iOS devices (versions 8 or newer). The app offers an easy graphic interface to adjust all Blunami settings and features with drop-downs and slider bars. All programming can be done through the app, as well as with your DCC system. You no longer need to understand CVs or own a command station to run your trains!
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Early CWSX #140085
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 50ft 100-Ton 4-Bay Hopper - Conrail #498751
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from mid-1960s to mid-2000s
- Standard car for 1980s and later Powder River unit coal trains serving power plants
- Also used to transport stone and other bulk loads
- Die-cast metal underframe for excellent performance loaded or empty
- Sloped sheet braces & update brake gear
- Correct 36 inch turned metal RP-25 wheels
- Proto MAX(TM) metal knuckle couplers
HO ALCo RS-3, Phase 3 - DCC/Sound - Boston & Maine #1519
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- fuel tank
- can motor
- flywheels
- blackened wheels with RP25 flanges and knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound V5 decoder
HO Scale Model Railroader - Building A Sectional Layout (Softcover, 96 pages)
If you are thinking about modeling a layout that will be easy to move, Pelle Seborg offers how-to advice for building sectional benchwork, laying track, and much more!
Well-known author and modeling expert, Pelle Seborg, introduces the sectional model railroad layout in his all-new book, Building a Sectional Layout. If youre building for a specific spot in your overall layout, Pelle offers how-to advice for modeling sections, building benchwork, and laying track.
Using his Midwest layout, Pelle shares new techniques that can be applied to both sectional and stationary layouts, from design to final details. His addition of a grain elevator demonstrates why every layout should have a signature structure a wow factor.
The book covers:
Planning and designing a sectional layout.
Building benchwork and laying track.
How-to advice for creating realistic scenery and structures (a bridge, farm fields, streets, highways, and more).
The importance of building a signature structure, using Pelles grain elevator as an example.
Author: Pelle Seborg
Size: 8.25 x 10.75
Pages: 96
Color photos: 450
Dust Monkeys Axle-Mounted Track Cleaner Pads for N Scale Tracks 4 pcs
Easy way to remove dust from track and stop further accumulation.
Hangs from axle out of sight
Use during regular operation
Works in forward and reverse
N Scale F89F Trailer - RTTX/Yellow #154350
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast body
- Detailed deck
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry? operating scale knuckle couplers
- Screw mounted trucks for accurate tracking
- Hitches fit Athearn N-scale trailers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Minimum radius: 9 3/4 inches
- Recommended radius: 11 inches
HO SD40T-2 - DCC & Sound - Southern Pacific (Kodachrome) #8351
ETA: May 2023
Detailed Information
SP -KODACHROME- FEATURES:
Gyra lights (Operate in DCC)
Cab roof A/C
P3 horn
Standard range dynamic brakes
See-through lower air intakes
SP and Santa Fe during the mid-1980s was trying to become one railroad. They were so sure the merger would be approved, they started to repaint locomotives into their -new- corporate colors. Using SP red and Santa Fe yellow, they came up with this bright and vibrant scheme. Unfortunately, the then ICC denied the merger leaving an example of what some railfans nicknamed, -Shouldnt Paint So Fast-. By the end of the merger negotiations, SP only painted 3 -Snoot-nose- SD40T-2s. We are offering all 3 which have slightly different details between them.
ROAD NUMBER SPECIFIC FEATURES:
#8315
123inch Nose w/brake wheel
cab roof mounted bell
plows on both ends
modified front L window
GRIP battery box doors, Santa Fe style font numbers
#8351
116inch nose w/ratchet brake
cab roof mounted bell
plows on both ends
modified front L window
GRIP battery box doors
standard rear headlight
SP style font numbers
#8377
123inch nose w/brake wheel
frame mounted bell
plows on front end only
front L window
standard battery box doors
SP style font numbers
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Photo-etched windshield wipers
Separately applied air tanks
LED Lighting
HTC truck sideframes
Welded ECAFB
All-wheel electrical pickup
See-through dynamic brake fans
Separately applied wire grab irons
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox specific for the tunnel motor
Speed recorder attached to appropriate axle per prototype
McHenry operating scale knuckle couplers
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Fully assembled and ready-to-run
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO RTR SD40T-2 - DCC & Sound - Southern Pacific #8497
SP AS-DELIVERED 8489 CLASS FEATURES:
Correct details per road number as appropriate such as: Horn type and placement, nose, ditchlights, air conditioner, antenna and ground plate, beacons, plows, headlight/gyralights, cab type, dynamic brake, and exhaust stack.
ROAD NUMBER SPECIFIC FEATURES:
As-Delivered features such as; L Window
Full gyralight package front and rear
Plows front and rear
Slanted style Nathan P-3 Horn
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Separately applied air tanks
See through cab windows
Welded ECAFB
Photoetch windshield wipers
LED Lighting
HTC truck sideframes
All-wheel electrical pickup
See-through dynamic brake fans
-Mushroom- nose vent on right side
Separately applied wire grab irons
Fully assembled and ready-to-run
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox speific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body
Painted and printed for realistic decoration
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for troublefree operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Replacement parts available including motor brushes
Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard Econami Sound by SoundTraxx
Sound units operate in both DC and DCC
Sound units operate in both DC and DCC
All functions NMRA compatible in DCC mode
Full DCC functions available when operated in DCC mode
Some functions are limited in DC
Engine, horn, and bell sounds work in DC
Slow speed control
All functions NMRA compatible in DCC mode
CV chart included in the box
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO EMD GP35 Low Nose - No-Sound / DC - Canadian Pacific #5004 (action red, white, black, multimark logo)
This HO Scale Stealth Series EMD GP35 from Broadway Limited is based on the ubiquitous EMD GP35 4-axle diesel-electric locomotive built by EMD and subsequently General Motors Diesel in the mid 1960s. Over 1300 of these locomotives were produced, and they were operated by virtually every major railroad in the United States. Addtionally 26 units were built for Canadian railroads and another 57 units were built for Mexican railroads. These freight locomotives were powered by EMD 567D3A 16-cylinder engines that generated 2500 horsepower.
This Stealth Series no-sound/DCC-ready model operates on DC out of the box, or a modeler can easily install their DCC decoder of choice. Out of the box, front and rear lights are directional, and other lights are always ON with track power. Additionally some lighting functions may be missing depending on selected aftermarket decoder the modeler installs. This model includes a 21-pin decoder socket so you can add your favorite DCC or sound decoder when you're ready. It also features a built-in speaker so you won't have to add one later. Other features include a heavy die cast chassis and select roadname-specific details. Its wheels profiled to operate on Code 70 and larger rail and curves of 18" radius but larger curves are recommended. The EMD GP35 is one of many Broadway Limited HO Scale Paragon4 locomotives.
HO MLW M420 - DCC Ready- Ontario Southland Railway(Red/White/Blue) #644 Otter Valley Railroad Exclusive
Each model comes with a signed certificate of authenticity from CEOs of Ontario Southland and Otter Valley Railroad
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO F89-F Bi-Level Auto Rack - CB&Q/BTTX #930180
Detailed Information
MODEL FEATURES:
Die-cast underframe
Authentic undulating safety railing
Accurate Whitehead and Kales Auto Rack
Early or late train lines and cut levers per prototype and era
Customer installed end bridge plates (included in box where applicable)
Detailed deck
Wire-formed brake plumbing
Separately applied hand brake per prototype
Separately applied wire grab irons where applicable
Prototypical ride height
70-Ton roller bearing trucks with animated rotating bearing caps installed
Trucks with animated rotating bearing caps
Minimum radius: 22inch - Recommended radius: 24+inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
International 4900 Single-Axle Semi Tractor - Assembled note single truck only
Licensed Replicas of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Positionable Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
This medium-duty truck line was introduced in the late 1980s. Powered by a Navistar DT inline six-cylinder diesel engine capable of up to 350 horsepower, the 4900 series has been a great starting point for a wide range of commercial vehicles, including delivery vans, single- and dual-axle semi tractors, as well as fire apparatus and other government applications
HO FGE 57Ft Mechanical Reefer - DCC Ready - BNSF #795010
Detailed Information
57Ft MECHANICAL REEFER FEATURES:
Available with onboard SoundTraxx sound
Scaled from prototype manufacturers drawings and field measurements
Repaints often vary by road number in the size and style of the reporting marks, car numbers and patch shapes
See-through protective screens on the genset end
Detroit Diesel 2-71 Genset visible inside
End wall corrugation visible inside
Inner refrigerator bulkhead
See through end platforms
Two different exhaust stack types: straight pipe with -flapper- or T-shaped -smokejack- per prototype and era
Full underframe detail including Keystone cushioning, air brake reservoir, control valve, brake cylinder, brake plumbing, and fuel tank
Factory applied end ladders and door closure rods
Trainline hoses with silver ends
Three different coupler cut lever styles per prototype
Body-mounted or truck-mounted brakes per prototype
McHenry operating scale knuckle couplers
100-ton roller bearing trucks with rotating bearing caps
Fully-assembled and ready-to-run
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Machined metal wheels with RP25 contours
Weighted for trouble-free operation
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO RTR 50Ft ACF Exterior Post Boxcar - CSX Transportation #129794
Product Information
Serve shippers on your HO railroad with these WalthersMainline 50Ft ACF Exterior-Post Boxcars. Responding to a growing shortage of serviceable cars, ACF and other builders unveiled a new generation of bigger equipment in the 1970s with increased width and height to improve carrying capacity. Today, theyre still in service for Railbox and many other roads, where they can be found moving all types of cargo. Features of these models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes seen from coast-to-coast 1974 to the present
Handles all types of general freight loading
Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
41Ft 3inch Truck Centers
15Ft 2inch Tall
10Ft 8inch Wide
Fully assembled
Correct 33inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
N Budd RDC-1 (Ph 1) - DC/DCC/Sound - Amtrak (Ph II)
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height
Medium Green
Models tree foliage for medium to large trees and low-to-medium ground covers, such as bushes, trees and shrubs. Use for any scale, colorfast and blends with other foliage.
Available in six realistic colors and great for making small trees too! Each package includes 32 oz volume of material. Underbrush works well for medium ground cover or undergrowth. It blends with our Foliage, Field Grass and Turf products.
1. Apply Scenic Glue (S190) to layout.
2. Press Underbrush into glue and allow to dry.
3/32In Fluorescent Yellow Rod (8pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Yellow
HEIGHT IN INCHES
3/32In
HEIGHT IN MM
2.4mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
Ballast Bag - Fine Light Gray (21.6 in3)
Realistically model railroad track, crushed rock, and stones.
Easy to use and colorfast.
HO Modern Bus Shelter - Kit with Accessories
Residents of todays HO cities and suburbs will appreciate this Modern Bus Shelter kit from Cornerstone!
A great detail at modern commuter stations, park-and-ride lots, schools and more, the kit includes:
-Parts to build one each open and closed shelters
-Two bike racks with bikes
-Parts molded in five colors and clear
N Scale Flexi Flo Hopper (Late) - Conrail (Flexi Flo Hopper Repaint) #897838
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Ford C Box Van - Rio Grande
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Rubber tires
HO EMD SD70M-2 Diesel - DCC & Sound - Susquehanna (NYS&W) #4066
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
NYSW FEATURES:
Former NS units
Front and rear ditch lights
PTC antennas
In late 2020, a group of four former Norfolk Southern SD70M-2 locomotives arrived on the property of the New York, Susquehanna and Western railway. The units were initially pressed into service wearing standard black Norfolk Southern paint, with a small patch on the cab. In 2023 the units were painted in NYSWs attractive yellow-and-black livery, based on the scheme that had been applied to the B40-8s
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Drop Grab Irons .012 inch Wire - pkg(20)
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Trailer Train #91944
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Evergreen Scale Models - OD White Polystyrene Rod .04In x 14In (10 pcs pkg)
HO Figures - City People (6)
Populate your layout with miniature figures from all walks of life!
HO Scale - 1956 Bel Air Nomad Wagon - Unpainted and Resin Cast Kit
10Ft 6In Modified 1937 AAR Boxcar - Southern Billboard #20128
Brass Strip - 12inch x 2 inch x .064inch
Length: 12inch
Width: 2 inch
Thickness:0.064inch
HO EMD GP40 Mother and Slug - DCC Ready - MKT (Green & Yellow) #226, 501
1982+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Slug is fully powered! Motor tucked into frame and body
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO 40Ft PS-1 Boxcar - Port Huron & Detroit #1219
Date: BK 7-62
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
N Scale Assorted Crates
N Scale ACF Type 27 Riveted 8,000 Gallon Tank Car - Champion Oils / Sterling Fuel #6031
Code 100 22inch Radius Track (5/pkg)
HO Code 100 with black ties/ nickel silver rail.
16 pieces to circle.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OAKX #5
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Alco RS-3 - DCC & Sound - Lake Superior & Ishpeming - #1609
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. DCC/Sound version features LokSound V5 decoder.
Plastruct 90001 3/64 x 10 in Angle
Bumpers 2 pcs
Track lights can be installed in unit.
HO AutoFlood III RD Coal Hopper - GLFX #8076
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
BN & CB&Q Box Cars -Way of the Zephyrs-, -Everywhere West- Slogans
HO 85ft General American G85 Flatcar - GTTX (Yellow) #300602
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
HO GP9 - DCC & Sound - Chesapeake & Ohio #6173
ETA: May 2023
Detailed Information
C&O FEATURES:
Short hood mounted bell
Forward 5-chime horn
Dynamic brakes
Tall exhaust covers
Expert approved art
Between 1955 and 1957 C&O bought 363 GP9s. These units were the backbone of the fleet, used on both road trains as well as local service. In the mid 60s C&O adopted a new simplified paint scheme with the large C&O initials on the long hood. Although the purchase of newer high horsepower units displaced many GP9s to secondary service, most of the fleet soldiered on into the mid 80s. Many units were retired in this version of C&O dress. These road numbers lasted into the mid 1980s which allow the widest range of modelers to benefit from this release.
ROAD NUMBER SPECIFIC FEATURES:
#682
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#683
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#688
Dynamic brakes
bell mounted on long hood
#690
Dynamic brakes
bell mounted on long hood
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Tru Color Paint - Acrylic - BNSF Green - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO ALCo RS-3 - DCC/Sound - CN (Black) #3039
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
Grand Trunk Western #50994 (black, red, white) - Ready to Run
Now you can add one of the most versatile machines every built to your maintenance-of-way fleet with the WalthersProto Jordan Spreader! Used to profile and grade drainage ditches during warmer weather, when the flakes start flying, Jordans can be found plowing snow and pushing it back from the tracks. These HO replicas are based on the model 2-200 Spreader-Ditcher-Snowplow used by dozens of railroads, which have been in service year round since the 1920s. Featuring all-new tooling, the models are a perfect companion to the WalthersProto Russell Snowplows (sold separately) and feature:
Limited edition - one-time run of these numbers
Factory-installed grab irons
Positionable wings and moldboards can be raised and lowered
Built tough with durable metal hinges and other details
Complete underbody with brake gear and piping
Thin profile stirrups
Cab window glass
Railroad-specific details
Horizontal or vertical air reservoir
Original or one of 3 later headlight styles as appropriate
70-ton roller bearing or Bettendorf trucks as appropriate
Single-chime air horn placement
Ultra-smooth rolling metal axles and 33in wheelsets
Proto MAX(TM) metal knuckle couplers
Tamiya Paints 87030 Masking Tape - 6mm
HO Code 100 Custom-Line(R) Crossing - 12-1/2 Degree
HO Code 100 with black ties and nickel silver rail. Precisely engineered angles of intersection to solve most crossing requirements. The 12 1/2 degree crossings are especially suited for junctions between double-track mainlines. A wide variety of single and double-track wyes and many other arrangements appear in Atlas layout instruction books.
N 33,900 Gallon - LPG Tank - Procor #34693
Multiple road numbers, unique numbers between singles and 3-packs
Three different body phases: early, flat panel, and late
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and brake wheel
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
Printed placards, where appropriate
Screw-mounted 100-ton roller bearing trucks
Machined metal wheels with RP25 contours
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Weighted for optimum performance
Operates on all popular brands of track
Minimum radius: 9 3/4 inch - Recommended radius: 11inch
UPGRADED FEATURES:
McHenry double-shelf couplers
Bent wire uncoupling levers
Rubber train line hoses
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OFOX #1838
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
With Platforms & Lenses - pkg(2)
Used on Dash-9 and AC4400CW
Die-cast metal
HO SD70 - DCC & Sound - Illinois Central #1007
Detailed Information
IC FEATURES:
As-delivered IC scheme in 1995.
P5 horn
Spare knuckle brackets on rear pilot
Spare knuckle basket on walkway
Sinclair and can-type antennas
Cab Vent
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.125 (10pcs pkg)
HO NSC 64 Ft 6000 Cubic Gondola HS - XRMX #2209
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
PRR X31A Double-Door Boxcar: Shadow Keystone, Late - Single Car #69492
Detail Variations:
6-pack includes the following numbers:
#69007
#69156
#69287
#69371
#69483
#69492
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
24-817 N Scale Viaduct S-Joiner 20 pcs
Shipped from Ontario Canada.
HO Scale G2 SD90MAC Diesel - DCC Ready - Norfolk Southern #7290
Detailed Information
NS FEATURES:
Primed for Grime
Patches match prototype deletion of UP reporting marks
Different patch shapes, paint color, & slogans per road number
Former UP units; major spotting details remain the same
EOTD above left rear of fuel tank
This group consisted of 110 second-hand units in total, 100 coming from UP and 10 from CEFX. Purchased with rebuilding into SD70ACus in mind, but were used in service as-is for a time before being rebuilt.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
HO DC-21 Pin Motherboard for LEDs (1)
F30A 50Ft Flat Car: Penn Central #701832
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
5/32 inch OD Round Copper Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long
Outside Diameter: 5/32 inch
HO Alco FA-1 & FB-1 Set - DCC & Sound - Erie #725C, 725D
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO 4700 Covered Hopper - Conrail (959H Repaint 1976) #886402
Truck: Tangent 100-ton Barber S-2 trucks with rotating bearing caps
Wheels: CNC-Machined 36 inch wheels
Conrail (CR) 959H Repaint 1976 illustrates Despatch Shops Incorporateds take on the GATC 4700 design. DSI built 400 Lot 959-H clones in 1965 that share the GATC look except for one major feature: DSI applied a welded roof vs. the standard GATC ribbed roof. Yes, Tangent duplicated this feature with a specific DSI roof for the Lot 959-H, including the DSI weld and rivet detail. This model replicates ex-NYC cars that have received 1976 Conrail oxide paint. Conrail continued to use these interior-lined cars in grain service and fitted the cars with Keystone Portloc gravity gates. This CR model inherits its former-NYC details including the high-mount brake gear and Morton brake step. The cars also kept their high-mount retainer. All those little Conrail paint details are present, like the accurate early CONRAIL under the logo, accurate CR ACI label, and accurate ex-NYC number stencils on the top right of the car side. Of course, Tangent applied white road numbers to the black 100-ton Barber S-2 trucks, matching Conrail prototype practice.
HO SD70ACe - DCC Ready - Ferromex #4029
Overview
FXE FEATURES:
Lit Number Boards
Truck lights
Nose mounted headlight
Early Brake wheel
Unique paint scheme
In 2021, Ferromex repainted one of their SD70ACes into this bright red and grey scheme. By spring of 2022, they released a second repainted unit. Both have minor detail and art differences between them and would add some color to your fleet!
ROAD NUMBER SPECIFIC FEATURES:
#4029
2021 Repaint
#4053
2022 Repaint
SD70ACE SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Turnout Control Switch
(HO & N Scale)
N Scale Modern Tagger Graffiti Decals - Set #6 (9pcs)
Love it or hate it, graffiti is everywhere. We do not condone painting graffiti on real railroad cars, buildings, bridges, etc. and it is against the law. But defacing your model railroad with Blair Lines Graffiti Decals is fun and still legal as far as we know! All decals are reproductions of graffiti found on real railroad cars.
All of these graffiti decal sets are now lasercut! What this means is you will no longer have to trim these decals close. You only have to cut a couple of small tabs and soak the sheet in water. As an added bonus, the decals are now printed on white decal paper making them more opaque!
HO RTR 53Ft Platewall RoadRailer Trailer - Conrail/ Norfolk Southern (Triple Crown) #461482
(white, Large Logo, NS-CR Logos)
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
HO Scale SD30C-ECO - DC/DCC Ready - Canadian Pacific #5034
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
Tunnel Portals -Single track
Models sturdy rock tunnel portals for any N scale layout. Easy to color plaster castings. 2 ea.
Meets NMRA specifications
Color with Earth Colors Liquid Pigment.
Outside: 3 1/4inch w x 2 11/16inch h (8.25cm x 6.82cm)
Inside: 1 7/16inch w x 1 7/8inch h (3.65cm x 4.76cm)
HO EMD SD7 - DCC & Sound - Southern Pacific (Black Widow) #5323
Southern Pacific
- Steam generator equipment details on short hood
- Correct Mars style -ash can- light on both ends of the locomotive
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Track Magic Liquid Track Cleaner - 8-1/2oz Bottle
Deluxe Materials Track Magic is a special cleaning fluid for model rail and slot car tracks electrical contacts and wheels that:
- Maximizes conductivity and reliability
- Works in low power and confined space situations
- Revives old electric contacts and improves new ones
- Is safe on plastic, foam, acrylic and enamel paint
- Is safe in track cleaning vehicles
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Slab Side Covered Hopper - Undecorated (8 Hatch, Round, Open)
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Early Yellow) #475027
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - Great Northern Rack/ Trailer-Train Flatcar RTTX #501922
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers
EMD E8A (DC/DCC/Sound) New York Central - Cigar Band #4040
Rapidos E8 model features:
3D laser-scanned body shell
Accurate nose and roof contours
Seven different noses
Three different back ends
Two different sides – with and without lifting lug covers
Three different steam generator options
36inch fan, 48inch fan or non-dynamic brake options
Single- or dual-headlight configurations
Freight or passenger pilots
Three styles of side grills
Original porthole sides or rebuilt with blanked sides (including unique variations)
Skirted or non-skirted fuel tanks
Original square and sloped or Hyatt roller bearing journal boxes
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Complete lighting effects – headlights, class lights, backup lights, ground lights, cab lights and more
Numerous road-specific detail parts in both plastic and etched metal
Details Include:
Side portholes
No dynamic brakes
Single MU door nose, right of headlight
Freight pilot
Standard rear
Cab-side walkway
Cab side lifting lug covers
Hyatt bearing trucks
Dual steam generators, widely spaced
Vertical Farr grill
No skirts
Pilot MU hoses
Canada Southern #3354
Bowser ready-to-run 70-Ton Offset Hoppers are based on typical cars used across the continent for hauling coal and aggregates. Layout-ready cars feature accurate decoration, molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton Offset Hopper is a great addition to your transition or classic diesel-era car fleet.
HO Flexible Self-Adhesive Paved Roadway - Vintage and Modern Curves
FEATURES:
- Model North American roads in minutes
- Realistic surface color with correct striping for US roads in various eras
- Ready to use, self adhesive and flexible - easy to add to new or existing scenery
- Mix and match with other roadway sections, each sold separately
Pave HO scale roads, streets, and highways quickly and easily with Walthers SceneMaster flexible self-adhesive paved roadway sets! Made from a unique flexible material that is self-adhesive, simply combine straight sections, and curves, or cut to fit and press in place. Each features a realistic surface color, as well as appropriately colored centerlines and fog lines along the outside edge of the pavement for modern or vintage paved roadways.
Combine this set of SceneMaster curves with straight sections (each sold separately) to simplify roadway installations in new or vintage scenes. Features solid double yellow centerlines to indicate no passing zone, and solid white edge markings. Easily cut to various sizes. Measures 3-1/8 inches wide with 9 inches outside diameter.
Decoder Buddy Mini
Makes Your HO Scale 21-Pin Decoder Installations Easy!
The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications. there has also been interest in HOn3 and S-Gauge applications.
- This mother board does not include the 21 Pin Decoder.
- This mother board requires soldering.
- These printed circuit board is NOT INTENDED FOR USE IN A DC SYSTEM.
The mother board includes:
- One 21 Pin Decoder receptacle
- Two pairs of track input pads
- One pair of motor input pads
- One set of stay alive pads (U+ , GND and if necessary a third control wire )
- One pair of speaker pads
This motherboard is equipped with resistors for use with LED lighting. (separate axial 2.2K) (Also available with 0 ohm, 750 ohm and custom specified resistors for function outputs. This accommodates incandescent lamps or bulbs.) It is IMPORTANT to realize that resistors must be used when LEDs are connected to the four lighting outputs of the Mini!!! The resistors may be soldered in line when purchased or the included resistors may be soldered inline upon installation. Remember there are different incandescent lamp voltages and current draw that also have to be taken into consideration.
HO PS4750 Covered Hopper - SOO Line (Original 1-1980) #75456
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
SOO -Original 1-1980- brings back a popular PS4750 paint scheme. We offered a different 1979 group of SOO cars about 8 years ago (!) and ever since, our mailbox has been full of requests for MORE SOO. We are very pleased to finally offer another SOO lot, this time from the 400-car 1980 Pullman group. These covered hoppers feature truck mounted brake beams, a side-mount train air line and scale-sized Miner -Selflok- outlet gates. Painted in that special shade of -Soo Line White- (Soo modelers know exactly what we mean), the models show off the classic yellow wheat stalk graphics and green SOO LINE roadname. An accurate and critical car for SOO and CP Rail modelers and lovers of the PS4750 everywhere, these cars continue to serve in grain and in buffer car services.
HO High Speed Limit Signs (16pk)
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Nickel Plate NKP #17546
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Purple
HO 50ft Evans Cushion Coil Car - Norfolk & Western #169991
Designed to speed loading and unloading while protecting large steel coils in transit, the Walthers Proto(R) 50ft Evans Cushion Coil Car is a great way to add steel traffic to any HO layout. These cars feature updated tooling with removable angled, round or glass fiber hoods.
Additional features include:
- One time run of these road numbers, limited quantity available - order now!
- Based on cars in service 1970s to early 2000s
- Prototypes carry larger steel coils used to make automobiles, appliances and food packaging
- Matching, removable hoods in angled, round and glass fiber styles with lifting and stacking brackets
- Fully assembled with etched metal walkways, grab irons, underframe cushioning device, separate brake gear, and more!
- Detailed body with V-shaped load cradle and separate restraints
- Heavy die-cast metal frame for enhanced performance
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Detail your new coil cars in minutes with the Cornerstone Steel Coil Load (#933-1499), sold separately)
- Great for use with Walthers Steel and Auto Industry Series!
HO Union X-3 Tankcar - Procor Limited #32955
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO Modern Yard Tractor - Norfolk Southern (SP) #26
Completely assembled
Many separately applied parts
Interior details
Rubber tires
Photo-etched steps and rear deck
Adjustable 5th wheel height
Clear window glazing
As seen in intermodal yards around the country
PROTOTYPE AND BACKGROUND INFO:
A terminal tractor, also known as a yard tractor, is a kind of semi-tractor intended to move semi-trailers within a cargo yard, warehouse facility, or intermodal facility, much like a switcher locomotive is used to position railcars.
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Illinois Central Gulf Rack / Trailer-Train Flatcar TTBX #965654
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
5-1/2in Long, Cut #2 Needle File - Triangle, Carded File (1pc)
HO ET44 Tier 4 - DCC Equipped - CN/Veterans #3015
Road number 3015 has square exhaust
Road number 3233 has angled exhaust
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO GMD SD40-2 - DCC & Sound - CP Rail: As Delivered #5779
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO Enterprise 2-Bay Covered Hopper - Canadian National (MOW Grey) #53351
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO Greenville 86ft Double Plug Door Box Car - Southern #42539
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Release Date: August 2020 (original), August 2021 (re-release with 4 new numbers)
SOU -Original 1977- is one of the truly classic schemes for these -rolling billboard- cars, complete with the -Southern Gives A Green Light To Innovations- logo. This stunningly accurate Southern Railway paint job is an exercise in details: a beautiful carbody freight car brown with the green -dot- inside the O of Southern and the -WSP- Woodhaven Stamping Plant code listing prominently displayed on the carbody. Like all 86ft auto parts cars these were pooled cars and ran on designated auto part routes – check out the photo on our website of one of these cars on DRGW in Colorado! This 1977-built Greenville example features body-mounted brake rigging hanging down from the underframe and 100-Ton trucks with rotating Brenco-6 roller bearing caps, just like the prototype. These beauties are available with four road numbers!
HO Maxi I Well Cars w/40ft Containers - DTTX #73006 (5pk)
Era: 1971-1990, 1991-2009
MODEL FEATURES:
- Fine ladder detail
- Separately applied brake piping and trainline hoses
- Weighted for optimal performance
- Body-mounted McHenry lower shelf operating scale knuckle couplers
- Prototypically correct 33 and 38 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Enterprise 2-Bay Covered Hopper - MSGX (Flo-Sweet) #185
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO 36ft Old-Time Wood Boxcar - New York, Ontario, & Western #5011
N Scale Dash 8-40CM - DCC Ready - BC Rail: Red/White/Blue #4607
Our N Scale Dash 8-40CM model features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
Heavy, die-cast chassis with a powerful motor and dual flywheels
Operational headlights and rear lights with operational factory-installed ditch lights (plus rock lights on BCOL locomotives)
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
Factory-installed couplers mounted at the correct height
Digitrax SE74 Signal Decoder
Fully connectorized installation.
Optional support for DCC 9-Aspect control mode, including Lunars.
Easy setup with Option Switches and LocoNet programming.
Configurable for four solenoid or four slow-motion turnout control.
8 Input lines for local control and sensors.
8 System routes with 8 entries each.
Advanced LocoNet configuration capability with Series7 style installation support using a DT602.
3mm LED - Golden White (6pk)
Dimensions: 3mm (0.12 inch) diameter
Voltage: 3.3 Volts
Golden White LEDs for adding or using the Hyperlight lighting effects. Can be used as LED replacements or in place of bulbs (see your decoder manual). The cathode or minus (-) side is indicated by the flag inside the LED, or by the shorter of the two leads.
Parking Meter pkg(14) - Yellow
HO FMC 60ft Hi-Cube Ex-Post Boxcar - CP Rail/MILW #628
MODEL FEATURES:
- Single 10ft Youngstown door
- Separately applied grab irons, end ladders, and brake wheel
- Photo-etch coupler cross-over platform
- Highly-detailed, injection-molded body
- 36 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Minimum radius: 18 inches
HO Flexible Vinyl Wall - Modern Concrete Cruciform Pattern
Add realistic detail to HO structures with cruciform modern concrete walls from Chooch Enterprises. Molded in flexible vinyl that is easy to cut with scissors or hobby knife, it can be finished with most acrylic paints (sold separately) for added realism.
Acrylic Flat Colors - Cockpit Green - 3/4oz (23mL) Bottle
XF-71
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
SD40-2 - w/DCC & Sound - Canadian Pacific #784
ETA: August 2021
Detailed Information
PROTOTYPE SPECIFIC INFORMATION
The SD40-2 was introduced in January 1972 as part of EMDs Dash 2 series, responding to competing products from GE and ALCO. Reliability and versatility of the 3,000-horsepower SD40-2 made it the best-selling model in EMDs history and the standard of the industry for several decades after its introduction. The SD40-2 was an improvement over the SD40, with modular electronic control systems similar to those of the experimental SD45X and DDA40X. The last SD40-2 delivered to a United States railroad was built in July 1984, with production continuing for railroads in Canada until 1988. Standard on all models are Athearns superior paint colors, reliable RTR drive and LED lighting for years of trouble-free operation.
SD40-2 SERIES LOCOMOTIVE FEATURES:
Fully assembled and ready-to-run
Separately applied wire grab irons
Separately applied air tanks
Coupler cut levers
Rubber MU hoses
Photo-etched stainless steel windshield wipers
Fine scale handrails molded in engineering plastic
DCC-ready Non-sound version features 21-pin NEM DCC plug
See-through dynamic brake and radiator fans
Exhaust stack
Frame mounted bell (unless noted)
Detailed 4000 gallon fuel tank (unless different capacity is noted)
HTC or Flexicoil-C trucks (per prototype)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body featuring new tooling
Painted and printed for realistic decoration
See-through cab windows
Bi-directional LED lighting
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup
5-pole motor with flywheels and multi-link drivetrain
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
Recommended radius: 22inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard, full feature Econmai sound decoder by Soundtraxx
Dual cube speakers for optimal sound quality
Engine startup sound sequence
Dynamic brake sound or Non-Dynamic Straight to idle on F4
Extra prime mover and horn sounds exclusive to Athearn spec decoder
Multiple bell sound files user configurable via Configuration Value (CV)
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Current Keeper ready with on board expansion plug
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via CV changes
CPR SD40-2 FEATURES:
Former Soo Line
-Dual Flags- scheme
All-weather window on engineers side
Operating cab-mounted strobe light (flashes on DCC+Sound version)
Winterization hatch included in poly bag; modellers may apply to suit their needs
No dynamic brakes
Operating front ditch lights
White Water Highlight
Add White Water Highlight to intensify water crests, rapids, and waterfalls. The look of foamy or frothy water can be created when added to Surface Water or Deep Pour Water. White Water Highlight is 100% acrylic.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
HO International Wide-Vision Caboose - Burlington Northern (2016+) #12513
(WFE Rebuild 2016+ Era w/FRA Light)
Product: BN International Wide-vision Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber or Gould Caboose Roller Bearing with separate brake beam part as appropriate for each paint scheme
Wheels: CNC-Machined 33 inch Wheels
DC/DCC Lighting Features: Interior Lighting as well as lighted FRA Steady Red Lights
HO SD70M - DCC & Sound - Union Pacific #4477
UP FEATURES:
UP lightning stripe scheme
Early SD70M body
Nathan K-3 horn
Air Dryer
Spare knuckles on rear pilot
Prime air filters
HTCR-II trucks
EMD low plow
Red sill stripe
GPS dome
Small can & Sinclair antennas
-Under Warranty- on cab
Late style fuel tank & breather piping
This release of UP SD70Ms depicts units from the first order, with early (non-flared) SD70M bodies in their as-built appearance. For later-era operations, a consumer-applied GPS dome is included.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
X-25 Mini Acrylic - Clear Yellow - 10mL Bottle
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or airbrushing. These paints can be used on styrene resins, Styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.
When airbrushing be certain to use any of the following Tamiya thinners: Items-81020, 81030, 81040, 81520, 87077.
Tamiya bottle paint label meanings and quick tips:
- X appointed colors have a glossy finish while XF designated colors are flat finish.
- The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
- Items 81521 and 81021 (Tamiya X-21 Flat Base) can be used as a flattening agent on Tamiya Gloss bottle paints. Simply add any X-gloss color then add flat base. Mixing ratio: 1:1
- The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
- For better paint brushing results use Tamiya Paint Retarder (item 87114) for a smoother brushstroke free finish.
HO Delivery G43A 2-1968 Gondola - Penn Central #576012
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inchh Wheels
PC -Delivery G43A 2-1968- in the original Penn Central green paint scheme, and a PC version we have not yet offered! These gorgeous models have 2 placards in place for the PC reporting marks, road numbers, and ACI label on the left side of the car. On the right side is an additional placard that includes a PC logo and Penn Central lettering. These placards are utilized on this class of PC car since these cars have side corrugations on each panel, where they knew that putting paint on the corrugations would not last very long! These cars have corrugated ends, and the Tangent replica includes oxide red car interiors ? on the interior walls and ends ? like the prototype. We even duplicated the slight green overspray on the inside end corners! The 100-Ton trucks feature accurate rotating -Timken- caps.
HO New Look Bus New Orleans Public Service
Destination Sign:
New Orleans
Detail Variations:
Bus-o-rama Panels
Air Conditioner
Left-side Emergency Door
4-window exit door
Early-style engine door
HO Transition Rail Joiners - Code 83 to Code 100 (12/pkg)
Atlas HO Scale Code 83 to Code 100 Transition Rail Joiners allow you to mix Code 83 and Code 100 rail. Use them just like regular track joiners wherever your Code 83 and Code 100 track meet.
89ft Thrall Bi-Level Auto Carrier - Ready To Run - Milwaukee Road Rack, TTGX Flatcar #910266
(yellow, silver; yellow Flat)
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6inch (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
Factory-installed grab irons
Separately-applied ladders and brake equipment
Ultra-smooth rolling metal axles with 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24inch radius is recommended for operation.
Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- SP -B-70-54 Delivery 2-1970
Product: Greenville 86′ Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Southern Pacific: This B-70-54 group covers SPs first order of quad door cars that were part of the GM Stamping Pool out of Cleveland, Ohio on the B&O. The scheme, of course, is simply one of the coolest paint jobs ever applied to a Greenville 86ft boxcar. Hold this car in your hand to appreciate the nuanced differences between white stenciling and SP Lettering Gray stenciling. From the huge dark gray arrows pointing to the centered SP logo, to the smallest black door handle detail, it?s all there. The SP cars feature their as-built 1970 appearance that includes Apex crossover platforms, a Universal hand brake housing (with separate long handle!) and a Universal brake wheel. SP ordered their cars with Center-Of-Car cushioning, and we have duplicated this setup, with a complete COCC underframe and draft gear. 70-Ton Trucks with 33in wheels and rotating Timken roller bearing caps finish off this replica. These SP replicas are Ready-To-Operate in eight numbers!
HO EMD E8A w/HEP - DC/DCC/Sound - Conrail (OCS) #4020
The Rapido Trains HO scale Conrail OCS E-unit locomotive features:
HEP muffler for 4020-4021 and steam generator details for 4022
Dynamic brake options where appropriate
Sealed, twin-beam headlight configuration
Modified pilots
Correct side grilles
Rebuilt blanked sides (portholes removed) in two variations
Non-skirted fuel tanks
Three chime RS3L and Hancock air whistle air horns included
Hyatt roller bearing journal covers
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Accurate E8 sounds provided by ESU LokSound
Complete lighting effects headlights, class lights, backup lights, ground lights, cab lights, Stratolite or beacons and more. -Not all lighting features will work in DC mode.
Optional user-installed ditch lights.
N Scale Amtrak "Rainbow Era" 8 Car Set
Like its locomotives, all of Amtrak?s rolling stock was inherited from predecessor railroads such as Penn Central. Since there wasn?t time enough to implement uniform branding on Amtrak?s fleet come May 1st, 1971, most trains were comprised of varied rolling stock from multiple railroads resulting in a colorful, or rainbow-like appearance. By 1972, Amtrak developed its Phase I livery and began repainting its fleet of heritage coaches, however due to the size and service demand of the fleet, this process took several years causing the ?rainbow era? to last well into the decade.
HO FMC 5077 SSD Boxcar - Railbox #17867
MASTER MODEL FEATURES:
- Single or Double Sliding Door where appropriate
- Multiple body styles
- Metal knuckle couplers
- Plate B Box Car
- X-Panel Roof
HO EMD FT A+B Set - DC/Silent - Boston & Maine (B&M Maroon Scheme) #4212A + 4212B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - Denver & Rio Grande Western(TM) Rack /Trailer-Train Flatcar TTKX #802765
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO 50Ft Plug Door Smooth Side Boxcar - Southern #600
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Wireform safety handrails
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 15inch
HO 40ft Corrugated HC Container -NYK (3/pkg) Set 1
MODEL FEATURES:
-Factory assembled with many detail parts applied
-Three different road numbers per pack
-Some SKUs feature multiple logos and/or decoration variations
PROTOTYPE AND BACKGROUND INFO:
An intermodal container is a large standardized shipping container, designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport from ship to rail to truck without unloading and reloading their cargo. Forty-five foot containers such as this model are commonly used in situations where increased capacity is needed. Corrugating the sheet metal used for the sides and roof contributes significantly to the containers rigidity and stacking strength, just like in corrugated iron or in cardboard boxes. International (ISO) containers have castings with openings for twist lock fasteners at each of the eight corners, to allow gripping the box from above, below, or the side, and they can be stacked up to ten units high for storage.
HO Coalveyor Bathtub Gondola - David Joseph (Teal) #30964
FEATURES:
Die-cast chassis
Ready-to-run
Interior bracing
Removable coal load
AccuMate couplers
Brake detail
100-ton roller-bearing trucks
Fine scale wheels
Accurate painting and printing
These cars were usually run in blocks of 4-12 units, carrying
construction and demolition debris.
All Scale, Dead Fall - 1.75oz
Use this natural, realistic product to model fallen or standing dead trees and stumps. It has the look of aged wood with gnarled branches and knots with some smooth, weathered pieces. Use with any scale!
HO 53ft Jindo Container - HUB Group/Norfolk Southern Set #8 (3pk)
(#633727, 633814, 633904) (GREEN/WHITE/RED)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting
Structure Signs, Farming Community, 1960s+ - Waterslide Decal
HO HEP E8A + A Set - DCC & Sound - Illinois Central (Executive - Gray & Black) #100/101
The IC and CN E9A Details Include:
Photo courtesy of Craig Walker
Correct HEP muffler and hatch
Modified pilots
Blanked sides with appropriate grille work
Roof-mounted cooling coils
Non-skirted fuel tanks
Hyatt roller bearing journal covers
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Accurate E8 sounds provided by ESU LokSound
Complete lighting effects headlights, recessed ditch lights in nose, class lights, backup lights, ground lights, cab lights and more. (Not all lighting features will work in DC mode.)
Numerous road-specific detail parts in both plastic and etched metal.
HO Pressureaide Covered Hopper - OMYA #51066
(white, blue)
HO Propane Tanks - Kit
Product Information
Walthers Cornerstone Propane Tanks are great details for a grain elevator or other industries that need fuel for their processes. These large capacity tanks are used to store propane to fuel grain drying equipment or anhydrous ammonia, used as a fertilizer. Similar tanks can also be found at propane dealerships. The kit includes parts for two propane tanks with supports and decals for several businesses.
Each tank measures: 9 x 1-1/2inch (22.8 x 3.8cm)
Two large-capacity storage tanks with supports
Realistic piping and top platforms
Great detail for industrial complexes
Easy-to-build plastic kit
HO GMD SD40-2W - DC/DCC Ready - Canadian National (Sergeant Stripes) #5345
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
RTR 30,000 Gallon Ethanol Tank Car - Archer Daniels Midland - (3 pack) #3
Detailed Information
31174, 31208, 31244
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
N Scale - The Shops (70 x 80ft)
This kit is designed to be built 24 scale feet high. Side walls have cut lines for optional door openings. End walls have 3 engine-house doors provided on front and rear walls. Office portion is 20 X 30 and the location and height is optional.
Kit includes doors, windows, roof top vents, and down spouts.
HO PS-2-4427 High Side Covered Hopper - Milwaukee Delivery 3-1967 #97885
Product: Pullman-Standard PS-2CD 4427 ?High Side? Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36″ Wheels
? Milwaukee Road MILW ?Delivery 3-1967? wears the classic yellow and black graphics as applied to this 300-car order from Pullman-Standard in 1967. Tangent?s previous run from 2018 featured Milwaukee?s 1968 order of cars with gravity-pneumatic outlet gates. We have carefully replicated the lettering on every panel, bay and center sill from bold MILWAUKEE ROAD to the tiniest PS lot 9174 stencil number. All of the lettering is present and accurate. These cars feature Miner gravity gates and a PS ribbed-style roof hatch. The model also features 100-ton Barber S-2 trucks with rotating Timken caps. Each SKU number varies with CAPY, liner stencil and related Pullan date information. We hear you Milwaukee Road modelers, and your continued requests for more MILW Tangent covered hoppers in our correct shade of Federal Yellow!
HO Hydraulic Excavator - Orange
HO GP9 - DCC & Sound - Penn Central #7500
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Diesel Locomotive MU Stand - EMD Late Single Type - pkg(2)
HO Scale MU Stands are based on those used on many diesel locomotives for operating in multiple-unit consists. This detail is part of the line of Detail Associates HO Scale locomotive detail parts.
Evergreen Scale Models 4109 .109in Opaque White Polystyrene Novelty Siding (1sheet)
HO Enterprise 2-Bay Covered Hopper - GFCX #115
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
#2 Self-Tapping Steel Sheet Metal Screws (24pk) - 1/2 x .088 inch
Walthers #2 Self-Tapping Steel Sheet Metal Screws are perfect for your models and for any other model or device that needs miniature screws. Walthers hardware offers matching nuts, as well as washers, hex wrenches, taps and other miniature hardware and tools in standard small sizes.
HO Doors (White Styrene) - Double Personnel Door w/ Windows
7-1/2 x 6-1/2 scale feet / 1 x 7/8 inches
HO Alphabets - Railroad Roman - Blue - Waterslide Decals
Description: (formerly 87-69-7) Alphabets - Railroad Roman - Blue - Waterslide Decal - HO Scale. Letters & Numbers are scaled to 4inch, 6inch. 8inch, 12inch & 16inch height
HO MLW M420 MR20c - DC/DCC Ready - Canadian National (Stripes) #3579
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - SOO Line #136168
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
All-Weather Window Set - 2 Pane Steep Angle (6)
Each all weather window contains a clear window glazing insert. Kit contains parts to build six individual all weather windows.
Craft Plywood Sheet - 12 x 12inch x 1/2inch Thick - Single Piece
Perfect for painting, staining, stenciling and wood burning
Cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use
1/2inch (1.27cm) Thick x 12 x 12inch (30.4 x 30.4cm)
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov
HO EMD SW1200 - DCC/Sound - Penn Central (ex NH) #9192
(Flexicoil Trucks)
Note: #9186 will NOT feature the larger Penn Central lettering on the hood.
The HO Scale Rapido SW1200 features:
- Designed from original blueprints and field measurements
- Heavy diecast frame, chassis and gearboxes for superior pulling power
- Rapidos renowned silky smooth-running drive system
- Working cab interior light and inspection lights
- Fully detailed Type A or Flexicoil trucks, as appropriate
- Full cab interior with working cab interior light and non-working fire extinguisher and fridge (where appropriate)
- Working headlights and illuminated number boards at both ends
- Some models have a rotary beacon or flasher/strobe as appropriate
- Separate handrails, including crash bars inside the cab
- Multiple exhaust stack and battery box door styles
- With or without working drop steps, as appropriate
- Incredible underbody piping and conduit detail - a Rapido hallmark!
- DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings from a 567 prime mover
HO USRA Single-Sheathed Boxcar: PRR (Youngstown door)
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO EMD GP39-2u - DCC & Sound - Santa Fe ATSF #3418
Detailed Information
ATSF FEATURES:
New Santa Fe phase 1 GP39-2u body with corrugated grilles - First time in Genesis!
Illuminated -Swing out- style number boards
Stratolight Beacon (effect in DCC)
Newly tooled exhaust stack
Removed class lights
-Switcher- style walkway steps
Rear mounted fuel tank
Large front anticlimber
Starting in 1986, Santa Fe rebuilt 50 GP39-2s in their Cleburne, TX shops, designating them as -GP39-2us-. The -u- stood for -upgrade- which was a common term for Santa Fe rebuilds during this time. Other than the mechanical and electrical upgrades, Santa Fe added some unique details that distinguish these from their non-rebuild counterparts. These changes include: Fuel tank moved to the rear, new -swing out- style number boards, new style exhaust stack, and added an equipment door to the right side hood, just behind the cab. They also featured -switcher- style walkway steps for crew comfort during switching moves. A few even received modified corrugated radiator grilles.
ROAD NUMBER SPECIFIC FEATURES:
#3409
PH 1 body with chickenwire grilles
Leslie 3-chime horn
added access equipment door behind cab
#3415
PH 1 body with chickenwire grilles
Leslie 3-chime horn
added access equipment door behind cab
#3418
New PH 1 body with corrugated grilles
Nathan 3-chime horn
added access equipment door behind cab
GP39-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO NSC Ballast Hopper - Union Pacific (Late) #919085
1990s+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
Scene Master Trackside Weeds Kit
Love them or hate them, this SceneMaster Trackside Weed kit makes it easy to bring realistic detail to any setting! Perfect alongside HO railroad and highway rights of way, theyre also a must for overgrown yards, gardens and more. The kit features:
Installs in minutes in new or existing scenery
Parts molded in realistic colors
Easy assembly with illustrated step-by-step instructions
Super value set includes 125 pesky plants:
3 Overgrown Grass mat sections
20 Dandelions (with white and yellow flowers)
6 Leafy Tendrils/Creepers
24 Ivy plants
40 Cornstalks
32 Broadleaf Weeds
HO Scale GP38 - DC/DCC Ready - Southern (High Nose) #2771
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO 60ft Hi-Cube Plate F Boxcar - BNSF #761082
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline(R) 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
B-100-40 Boxcar: Golden West - Ventura County - Single Car #140000
Detail Variations:
6-pack includes the following numbers:
#140000
#140003
#140008
#140011
#140013
#140016
Our B-100-40 model features the following details:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Genuine Kadee #158 Whisker couplers
Newly tooled trucks with turned metal 36 Inch wheels
Separate door rods and door tracks
Road number specific number patches
Separately applied coupler cut levers
HO RTR 68Ft Railgon Gondola - BNSF #518501
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
Digitrax TF4 HO DCC Quad Function Decoder with Transponder
our 125mA (250mA peak) function output for lights or other functions
Functions can be turned on/off using F0-F12
Supports both 2 digit and 4 digit addressing
Programmable from DCC compatible equipment
Configurable Strobe feature lets you simulate flashing lights like FRED, Strobes, Mars Lights, etc. on the yellow and white leads
Standard On/Off Function operation available on green & violet leads.
Compatible with Digitrax DCC Transponding Systems
Approximate size: 0.461 inch x 0.31 inch x 0.161 inch (11.7mm x 7.8mm x 4.1mm)
Specifications
Code 83 Deck Truss Bridge
CN Piggyback Trailer - Unpainted and Resin Cast Kit
Wrapped Lumber for 50 Ft Bulkhead Flatcar - Weldwood of Canada
Put your WalthersProto 50Ft CCF Bulkhead Flatcars (920-104313 to 104326, each sold separately) to work in minutes with these Walthers SceneMaster Wrapped Lumber Loads. Ready to use, each one-piece load features full-color graphics and simulated center bracing, perfect loads in-empties out operation.
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
Cab Air Conditioner -Prime-
HO Scale Metal Coupler Kit - Medium 9/32inch Centerset w/#232 Draft Gear Boxes -2 Pair
All-in-One Couplers & Centering Springs for Quick Conversions
Kadee Whisker couplers are all metal drop-in Self-Centering Centerset Shank Couplers and are able to accommodate a wide range of mounting situations that the No.5 type centering spring makes converting manufacturers shallow cast-on coupler pockets difficult. All Kadee couplers are designed and tested for reliability, durability, for a long life and feature Delayed Magnetic Uncoupling with Delayed-Action.
All-metal coupler with bronze centering spring. Designed and tested for compatible operation with Kadee(R) HO Scale couplers
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX (6 pkg) #1
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Includes Road Numbers:
20001
20016
20084
20128
20186
20210
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Talus - Coarse Gray (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings and or road cuts. Intermix grades and blend shades for the most realism. Color Natural Talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle Talus and secure with Scenic Cement (#191).
Particle size- Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
Evergreen Scale Models 104 Opaque White Polystyrene Strips 14in .010x.080 (10pcs pkg)
N Scale 33 Inch Metal wheel Set - 8/pkg
HO Scale G2 SD90MAC Diesel - DCC & Sound - Union Pacific #3705
Detailed Information
UP FEATURES:
As renumbered to 3470-3775 in 2012
3681 as repainted with flag, June 2015
EOTD holder between starter capacitor box and fuel gauge
Front only ditch lights mounted on pilot face
Both Cab door options, with and without window
Union Pacific specific cab antennas
Union Pacific was the largest buyer of the SD90MAC with 309 units total; the railroad designation was SD9043AC as they were delivered with the 710G engine rated at 4300hp. Taking delivery of the first locomotives in 1995 and the last in 1999; originally numbered in the 8000 series, these locomotives were renumbered in 2012 and some are still in service today. 3681 is one of only a few SD90MACs to receive the flag paint scheme.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
40ft NP 10000-series boxcar: Northern Pacific 1940 Small Monad Scheme #10287
Spray Can - Racing Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
#29 20 Series Magne-Matic(R) Couplers
Long (25-64inch) Underset Shank 2 Pairs
The 20-Series Kadee Magne-Matic Couplers are designed for either Talgo (truck) or body mounting.
The #27 Kadee Magne-Matic Coupler features a very strong plastic isolated coupler, #634 Centering Spring, (same gear box as the NO.5 Coupler), insulated #232 Draft Gear Box and Lid with side and center screw holes for mounting and the (20-Series draft gear box) insulated #213 Universal Adaptor Plate.
The most popular Kadee(R) coupler, fits most HO equipment. Metal coupler with insulated plastic gear box.
HO Add-on Office/Showroom - Kit
This kit is designed with cut lines on the back side of the walls so that door and window locations are optional. Kit includes doors, windows, outside sign (no shown) and down spouts.
Dimensions: 36 wide x 28 deep scale feet / 5 x 3-7/8 inches.
HO PC&F 5241 CUFT - Boxcar - BKTY Patch 2 (UP) - 3 Pack
153475, 153496, 155155
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 60ft Bulkhead Flatcar - TTPX #804438
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
Single Type G - Double Head
All Scale, Dead Fall - 0.5oz
Use this natural, realistic product to model fallen or standing dead trees and stumps. It has the look of aged wood with gnarled branches and knots with some smooth, weathered pieces. Use with any scale!
N Scale 2-Bay Covered Hopper - Union Pacific #10029
RTR 67Ft Trinity 6351 4-Bay Covered Hopper - ADM
Product Information
Expand grain traffic in minutes with layout-ready WalthersProto(R) 67Ft Trinity 6351 Four-Bay Covered Hoppers! Introduced in the early 2000s, these large-capacity cars are industry favorites for handling dired distillers grains (DDG), malt and many other food products. Other features of these HO Scale replicas include:
Limited edition - one time run of these roadnumbers!
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct 36Inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
N Scale 53Ft Containers - EMP (Large Side Logo) Set #1 (3 pkg)
Road Numbers: 634509, 634524, 634725
FEATURES:
Side corrugations with an 8-55-8 arrangement
Front wall with 10 vertical corrugations
Roof with 6-54-6 corrugations
1-3-1 beveled doors
Placard holders on front wall, sides and door
Each set comes as a 3-pack w/different road numbers
Terminal Strip Mounting Kit - 2 units
Includes 2 terminal strip boards with resistors for easy installation. Each terminal strip board can handle from 1 to 4 signal heads. Use this interface instead of Signal Mast Bases when you already have signals installed on your layout. Simply run the wires from your existing signals to the terminals on the TSMK and plug your Signal Driver Cable in on the plug provided.
HO GMD SD40-2f - DCC Ready - CP Rail #9006
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
10Ft 6In Modified 1937 AAR Boxcar - Gulf, Mobile & Ohio #52549
N Scale Short Barrel Ore Hopper - Ontario Northland: Progressive Green #6501
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
N Scale S-4 - DCC/Sound - CP Rail #7117
FEATURES:
- Scaled from actual prototype measurements
- 2 cab variations - riveted or welded
- Option for horizontal or vertical radiator shutters
- Fine scale handrails
- Separately-applied coupler cut levers, air hoses, piping, etc.
- Directional LED lighting (includes cab rear headlight)
- Die-cast hood & chassis for improved pulling performance
- Dual-flywheels for maximum performance at all speeds
- Factory-equipped with AccuMate knuckle couplers
- Exceptional painting and printing
- Features ESU LokSound Decoder
Thomas & Friends Thomas with Annie and Clarabel Ready To Run Electric Train Set - HO Scale. Thomas and his loyal coaches Annie and Clarabel are carrying a number of very important passengers, and you are invited in join in their travel fun! This HO scale electric train set is the perfect way to begin your Thomas and Friends collection. This ready-to-run train set includes: Thomas the Tank Engine with moving eyes, Annie coach with international style hook-and-loop couplers, Clarabel coach with international style hook-and-loop couplers, 36in circle of snap-fit E-Z Track? with 11 pieces of curved track and 1 curved plug-in terminal rerailer, power pack and speed controller, illustrated instruction manual.
Build your Thomas & Friends collection one friend at a time!
Features:
Complete Ready To Run Train Set
Powered by a Thomas the Tank Engine with Moving Eyes
Includes; Annie and Clarabel Coaches with International-Style Hook and Loop Couplers
36in Circle of Snap-Fit E-Z Track, Power Pack and Speed Controller
illustrated instruction manual
HO Scale 1:87
Retail Package Measurements: L 19.5 in., W 3 in., H 18 in.
Golden West - INTX #74137 (blue car, red & yellow lettering, patch)
These all-new HO models include etched-metal, see-through roofwalks, detailed brake gear, authentic 100-ton roller bearing trucks with blackened metal wheels and body-mounted Accumate(R) couplers with screw-attached coupler pockets. Undecorated models come with optional parts for three different types of loading hatches and two styles of discharge outlets. Decorated models come prepainted and lettered in a variety of railroad-owned schemes with details appropriate for the late (post-1971) production.
HO 60ft NSC 5150 3-Bay Covered Hopper - Cargill (ICMX) #1064
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Budd Slumbercoach - Amtrak (Phase 3) #2088 Loch Leven
All new from the ground up, the Rapido Slumbercoach features:
Designed from original blueprints
Full Rapido level of underbody detail including separate pipes and conduits
Full multi-color interior detail including roomette doors
Track-powered interior lighting (operable on both DC and DCC)
Accurate GSC 41-NDO-11 trucks with disc brake detail
Etched-metal end gates
Sprung diaphragms
Rapidos renowned stainless-steel finish
Rooftop Details Set - Unpainted Castings
HO Greenville 86ft Double Plug Door Box Car - Wabash #55075
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: August 2021
Wabash -Original 1964- 1965+ Era is one of the many -classic- 1960s schemes seen on these cars, and represents one of the last schemes the railroad wore before being merged into the Norfolk and Western! This rolling billboard features Wabashs classy dark blue scheme with large Wabash lettering, and then undoubtedly the largest Wabash flag applied to any rolling stock, adorned with the -Follow the Flag- logo. Pure class. These cars were delivered in 1964 with full running boards but were soon modified in 1965. These significant modifications included the removal of the roof running board, the lowering of the brake wheel housing and removal of high grab irons and end ladders. Our Wabash model replicates this 1965+ look with exact features: an accurate 1964-built body, bolt -remnants- on the sides and ends of the model, and a roof with the old bolt locations of the running board supports! The features go on and on, including an accurate -lowered- Miner hand brake, 1965 replacement full-width Apex crossover platforms, 70T trucks with 33inch wheels, truck-mounted brake details and rotating Brenco-6 roller bearing caps. This stunning model is available in four numbers. (Please note there is no SKU 1/2 for this production).
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX #16153
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
5/8 inch OD Round Aluminum Tube - 0.029inch Thick x 12inch Long
Round Aluminum Tube (1 pc)
Outside Diameter: 5/8 inch
HO RTR ACF 4650 3-Bay Hopper - Burlington Northern #446496
Date: BLT 6-75
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO PC&F 5241 CUFT - Boxcar - Pan Am - (B&M) - Single Car #32244
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
O Scale - 81ft Great Lakes Freighter MV White Swan - Resin Cast Kit
NOW AVAILABLE IN O SCALE!!
20-1/2 inches long
Waterline resin model kit.
81ft wooden Great Lakes motor vessel
Built in 1922
Wrecked in 1956
Typical of small Great Lakes wooden ships from 1880s to 1940s
Kit includes all details needed to build a complete model!
HO 50ft Covered Gondola - Southern #2209
MODEL FEATURES:
- 70-ton Roller Bearing trucks
- Removable cover
- Separately-applied brake wheel
- Weighted for optimum performance
- 33 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Body-mounted McHenry operating scale knuckle couplers
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inch
PROTOTYPE AND BACKGROUND INFO:
Gondolas are low-sided railroad cars that are used for hauling bulky loads that don not need protection from the weather. The Roundhouse 50ft gondola is representative of larger cars that began appearing on the rails in the early 1950s, and many survive today working for modern roads and contractors.
HO 1980 GMC General Sleeper-Cab Tractor - Assembled - Black, Yellow Pinstriping
#145 Short Overset Shank
All-metal -whisker- coupler with metal self-centering spring. Designed and tested for reliability, durability and long life. Compatible with Kadee HO couplers. Fits most HO scale equipment; can be used in place of No. 5 coupler.
Fall Colors 3/4 - 2inch 2 - 5.1cm; pkg(38
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors.
HO H21A 4-Bay Hopper - Pennsylvania (PRR Black, Plain Keystone) #695713
1961+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
12inch Long Round Aluminum Rod - 3/8 inch Diameter
Round Aluminum Rod - not hollow (1 pc)
Outside Diameter: 3/8 inch
HO Lightweight Coach - Erie Lackawanna #1306
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO FMC 60ft Hi-Cube Ex-Post Boxcar - GTW #384700
MODEL FEATURES:
- Single 10ft Youngstown door
- Separately applied grab irons, end ladders, and brake wheel
- Photo-etch coupler cross-over platform
- Highly-detailed, injection-molded body
- 36 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Minimum radius: 18 inches
1:87 New Flyer Xcelsior XN60 Articulated Bus - Laker Line Grand Rapids: Michigan
(blue, white)
By Awesome Diecast
Product Information
This detailed HO Scale New Flyer Xcelsior Articulated Bus is perfect for adding realism to your modern-era city streets or out on the open highway. Based on vehicles first introduced in 2008, this limited-run model features a die cast body with injection-molded parts, window glazing and fine decoration. Its a great addition to your 2000s and later layout scenes or vehicle collection. The New Flyer Xcelsior Bus is one of many detailed HO Scale bus models from Iconic Replicas.
Shafts & Bearings Grease - Enamel Wash 35ml Bottle
Enamel Product.
Make real grease effects in any type of pieces. With this product you can manipulate the grease effect until dry to get real appearance in different parts of your planes or in any vehicle with a very special texture. You can make small scratches with a stick before completely dry and achieve a real effect. This product is enamel and it can be blended with the rest of our colors and it is diluted with our White Spirit.
HO MP15DC w/DCC & Sound - Missouri Pacific #1537
FEATURES:
- Three different hood styles (angled air filter box, square air filter box, standard hood)
- Exhaust stacks: with or without muffler
- Long hood sand fill: recessed or extended
- Rear sand fill: Three variations of sand boxes behind cab
- Pilot: standard or with snow plow
ADDITIONAL FEATURES:
- Separately-applied scale detail parts include: windshield wipers, metal grab irons, coupler cut levers, multiple-unit hoses, snow plow, train line hoses, fine scale handrails, and more!
- See through step detail on sill
- Etched metal radiator grilles
- Painted crew members
- Factory-equipped with AccuMate knuckle couplers
- Coupler pocket designed to accept AccuMate Proto-couplers
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Directional lighting with golden-white LEDs
SOUND FEATURES FOR GOLD SERIES:
DCC Operation:
- Supports all DCC-programming modes
- Flexible mapping of function keys F0 to F28.
- A total of six DCC function outputs are available
- Follows all NMRA DCC standards and recommended practices.
Analog (DC) Operation:
- The LokSound Select Dual-Mode decoder allows your Atlas Gold Series locomotive to be used on DC as well as on DCC layouts.
- Please note that the Atlas Quantum Engineer will NOT operate an Atlas Gold Series locomotive equipped with a LokSound Select decoder on an analog (DC) layout. However, the sound and lighting functions of the LokSound Select decoder in the Atlas Gold Series C424/425 locomotive can be controlled by an easy-to-use basic DCC system
- Also note that on a DC-powered layout, a DCC and sound equipped locomotive CANNOT be consisted with another locomotive that does not also have both DCC and sound. (This statement does NOT apply to DCC-equipped locomotives operating on a DCC layout.)
Sound Functionality:
- Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
- There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
LED Replacement - No Lens/Deck Mount Ditch Light (12)
1/8In Fluorescent Red Rod (7pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Red
HEIGHT IN INCHES
1/8In
HEIGHT IN MM
3.2mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
The Rustic Water Tower from Woodland Scenics is a vital part of any city water system. Based on a 1900s water tower, structures like this have been local landmarks for over a century and many are still in use. This steel water tower features an elevated water tank, latticework legs, a center inspection scaffold, ladders and a separate pump house. The tower is factory weathered and features applied graffiti for extra realism. The Rustic Water Tower comes equipped with a rooftop LED aircraft warning light designed for use with the Just Plug(R) lighting system
2 1/8 x 2 17/32 x 5 1/2in
5.39 x 6.42 x 13.9 cm
N Scale Louvered Wall Vents - pkg(2)
12x12 scale feet / 15/16 x 15/16 inches.
HO 57Ft Mechanical Reefer - Pacific Fruit Express #456332
(white, black, orange)
Product Information
Move all kinds of perishable products on your HO railroad with WalthersMainline 57Ft Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s. Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including:
One time run of these roadnumbers, order now - limited quantity available
Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
Keystone or Hydra-Cushion underframe detail as appropriate
Short ladders and low hand brakes
9Ft Youngstown plug door with separate latch bars
Authentic Stanray peaked, ribbed roof with capped exhaust stack
Detailed underbody with brake gear and fuel tanks
70-ton roller bearing trucks
Correct 33Inch RP-25 turned-metal wheelsets
Proto MAX metal knuckle couplers
HO NSC 64 Ft 6000 Cubic Gondola HS - XRMX #2206
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO EMD SW9 - DC/ Silent - Santa Fe (ATSF Bookend Scheme) #2435
Santa Fe:
Delivered in 1953
Unique stepped louvers on hood
-Trash can- style spark arrestors
Large cab sunshades on front and rear cab windows
Carbody handrails
Working Pyle 360 warning light
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Weyerhaeuser #1117
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
9-pin to DCC Medium Plug - Short Harness (1 inch)
HO GP9 - DCC & Sound - Northern Alberta Railways #201
NAR FEATURES:
Winterization hatch
Canadian-style slotted steps and footboards
Canadian-style angled handrails
Bell mounted on the short hood
Peacock wheel hand brake
M-3 horn with all bells forward
Northern Alberta Railways rostered eleven total GP9s, numbers 201-211. The paint scheme depicted here was in use from 1965-1975. The road was jointly owned by CP and CN until 1981, when CN bought out CPs share of ownership. NAR GP9s could be found leading both freight and (with the help of a steam generator car) passenger trains.
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Enterprise 2-Bay Covered Hopper - Canadian National (CNR Delivery) (6pkg) #1
6-Pack includes the following numbers, all individually packaged: #113025, #113043, #113086, #113094, #113155, #113161
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
RTR 60Ft Gunderson DD HC Box, BNSF/Wedge #761228
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO 5820 Covered Hopper - Procor/UNPX (BF Goodrich) (3pk)
Includes the following numbers, all individually packaged:
#122146
#122157
#122216
Era: 1978+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO NSC Ballast Hopper - Herzog (Early) (6pkg)
1977+
6-Pack includes the following numbers, all individually packaged: #6307, #6320, #6335, #6359, #6388, #6402
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
Manchester Liners/Modern Container Ship - Unpainted and Resin Cast
FEATURES:
- White Polyurethane Resin Kit
- Unique One Piece Castings for Easy Assembly
- Built at Gijon, Spain 1971
- Scrapped at Aliaga, Turkey 2002
- Typical Short Sea Container Ship
- Measures 39-3/8 Inches Long When Complete
- All Deck Fittings Included
- Waterline Model
- Era: Suitable for 1960s to Present
- Full Color Instructions
- Decals Included
HO F89F Trailer w/40ft Trailer - TTX/Brown #152199, Realco Trailer
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast underframe
- Wire formed brake plumbing
- Detailed deck
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Minimum radius: 22 inches
- Recommended radius: 24 inches
40FT Z-VAN REEFER TRAILER MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- Wheeled or shoe-style landing gear per prototype
- 2 or 4 door rods per prototype
- Fully-assembled and ready to use out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
HO EMD SW9 - DCC & Sound - Boston & Maine (B&M As Delivered) #1220
Boston & Maine:
Delivered in 1952
-Trash can- style spark arrestors
Deck mounted side handrails
Hood mounted number boards (road number specific)
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO Vulcan Manufacturing Company - Kit
Product Information
Found in many cities, the prototypes for steel fabricators like the Walthers Cornerstone Vulcan Manufacturing Co. generate lots of business for the local railroads. Raw materials arrive from the steel mills, and some finished pieces are also delivered by rail. Others are shipped by a fleet of trucks. The kit includes the detailed main building, with its realistic brickwork and tall smoke stack. Out in the yard, detailed trusses and a canopy roof are provided to model an overhead crane. Decals for the big Vulcan Manufacturing sign out front are also included.
Great for steam or diesel-era layouts
Brick main building with clerestory
Square brick smokestack
Detailed trusses and a canopy roof (Overhead Crane 933-3102, sold separately)
Molded in appropriate colors
Realistic decals
N Scale Code 55 Streamline Electrofrog #8 Turnout - Long 36inch Radius - Right Hand Turnout
Product Information
12inch radius diverging route.
Peco Universal Fine track has a fine scale appearance. Rail is Code 55 above the ties, but the clever double base adds strength and maintains compatibility with Peco Code 80 track system components. Code 55 turnouts are not direct replacements for Code 80 components as the geometry is slightly different. Turnouts include extra tie sections for placement under the rails once the track has been fitted onto the layout.
Peco Electrofrog turnouts feature electrically live frogs to enhance slow-speed performance. They require that power always be fed from the points end of the turnout.
All Peco turnouts are power-routing, meaning that only the route the points are lined for are electrically live. Turnouts feature realistic ties and guard rail details. Sprung points ensure positive contact each time the switch is thrown. Turnouts can be motorized using the Peco PL10 Turnout Motor #552-3010.
Kit - 4-1/4 x 3-5/8 x 3inch 10.7 x 9.2 x 7.6cm
Typical Modernized Suburban Home Design
Built Coast-to-Coast - Most Still Lived in Today
Detailed Brick Siding
Three Different Front Walls with Appropriate Windows & Doors
Add-on Roof Mounting Pad for Interior Lighting (Available Separately)
Separate Downspouts
Printed Interior Details
Molded in Four Colors & Clear Plastic
N Scale Dash 8-40CM - DCC Ready - Canadian National: Stripes #2405
Our N Scale Dash 8-40CM model features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
Heavy, die-cast chassis with a powerful motor and dual flywheels
Operational headlights and rear lights with operational factory-installed ditch lights (plus rock lights on BCOL locomotives)
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
Factory-installed couplers mounted at the correct height
HO EMD SD9 - DCC & Sound - Burlington Northern #6237
Burlington Northern
- Former CBQ units (Phase IV, first time for a plastic model!)
- Correct 5-step, BN walkway
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Great Lakes Diesel Tugboard Kit - Unpainted and Resin Cast
(1/87 Scale)
During the 1950s many of the existing fleet of steam powered tug boats were converted to diesel. This resulted in modifications to the wheelhouse and stacks. These changes are reflected in this modernized version of Great Lakes Towing Companies L.C. SABIN. Many of the converted tug boats are still in service today. Tug measures 11in x 3-1/4in.
-Cast Polyurethane Resin Kit
-Easy Assembly
-Details Moulded in Place
-Accurate
-Less Trucks and Couplers
Try Sylvans Resin Prep! Helps prepare your model for painting!
Part #SSM-A001
G2 Dash 9-44CW - DCC Ready - CN #2600
ETA: Late October 2022
Detailed Information
CN FEATURES:
CN -teardrop window- cab
Nathan K3L airhorn
Canadian style ribbed anticlimbers
Electronic fuel gauges
Spare knuckles on rear pilot
No air condiitoner
Late (angled) stepwell gussets
Canadian AAR style control stand
Front and rear ditch lights mounted on anticlimbers
Standard medium front snowplow; small CN style rear rock plow
Wi-tronix antenna included in poly bag; install for 2010+ era
CN NOTES:
After receiving an order for Dash 9-44CWLs with Canadian 4-window cabs, CN reverted to the standard 2-window configuration for its subsequent orders. However, to increase the crews visibility, CN requested that the front windows be modified with angled panes (these are known as -tear drop- windows).
DASH 9 SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
HO USRA Single-Sheathed Boxcar: C&NW
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Tangent Scale Models Delivery 1969 - Gunderson 6089 50ft BoxCar D&RGW
Denver & Rio Grande (D&RGW) Delivery 1969 is an exciting release for us. The distinctive D&RGW Grande Gold orange paint coupled with black ends and carefully added roof overspray makes a model that is simply stunning. The prototype Rio Grande graphics were carefully fitted to the available 7 panels of space to the right of the doors. The white paint at the tops of the ends reminds you that this is a high-cube car. The Rio Grande cars feature truck mounted brake details, faithfully replicated with accurate truck-mounted brake beam details and no body-mounted brake cylinder on the Hydra-Cushion underframe. The Tangent D&RGW model also features accurate unpainted Morton style crossover platforms, early 5-board large tack boards on the sides and ends and an Ajax handbrake. Don?t forget to check out those accurate Hyatt rotating roller bearing caps on the 70-ton Birdsboro foundry Barber S-2 trucks!
Product: Gunderson 6089 50ft High Cube Boxcar
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Birdsboro foundry Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 33in Wheels
HO Farmers Grain and Stock CO
This small HO scale elevator will fit nicely on any size layout.
It includes the Scale, Office, and Unloading Shed.
Features include: peel & stick windows, doors, and trim; drive in ramps with laser-scribed decking; tabbed and slotted wall construction; positionable doors; access ladder; white metal grain spout; simulated standing seam metal roofing; and a color sign sheet.
The assembled kit measures
6in long x 5.5in wide x 7in high.
59 Ft Cylindrical Hopper - Ready to Run - Logimex NDYX #816903
(gray, black, blue and white logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
-Limited Edition - one time run of these roadnumbers!
-Model of a National Steel Car 4550 cubic foot car
-Fully assembled, ready to run
-Thousands used in North American grain and potash service from 1972 to the present
-Trough or round loading hatches as appropriate
-Four different car numbers for each roadname
-See-through running boards
-Detailed brake gear, roof hatches and end ladders
-Correct 36Inch turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
Evergreen Scale Models Opaque White Polystyrene Strips 14in .125x.156 (6pcs pkg)
Universal (Fine Kerf) Razor Saw - 32 TPI
A good all purpose saw. .022inch thick blade, 6-1/2inch long, 1-3/16inch cutting depth.
Peco PSG-76 - Self Adhesive Autumn Grass Tufts - 10mm (100pkg)
These handy packs contain 100 self adhesive ready made tufts, to stick down wherever required on your layout or diorama.
HO CP Rail System - Double Stack Intermodal Cars 1992+ - Decals
Kit - 50 FT Scale w/1 adjustable Pier
one 50 FT Bridge and 1 Adjustable Pier
The Rix Wrought Iron Highway Overpass for HO scales is modeled after the bridges built to span over railroad tracks. The Rix Highway Overpass Wrought Iron consist of 50 foot spans which interlock together so that any length bridge can be built. The piers are designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy.
HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Circle Keystone) (6pkg)
1948+
6-Pack includes the following numbers, all individually packaged: #727129, #727218, #727340, #727401, #727423, #727438
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO H-6-G - DC/Silent - Canadian National Railway (Tilted Wafer) #1373
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO B36-7 - DCC & Sound - Conrail (White Sill Stripe) #5046
The B36-7 Locomotive features:
Incredible underframe detail including piping, a ridiculous number of separately-applied parts and full cab interior
Dead straight metal side handrails with plastic stanchions
A crazy level of road-specific detail options, with different pilots, anticlimbers, plows, fuel tanks, air dryers, antennas, wind deflectors, headlight locations, air-conditioning units, different bodies, multiple nose and rear end styles, three versions of drop step and so on...
With or without class lights (as appropriate)
Conrail locomotives come with their unique -red bug eye- marker lights
Equipped with ditch lights - on front and/or rear - as appropriate
ATSF and Southern Pacific locomotives have Stratolite beacons
Three styles of operating, flashing ditch lights, front & rear (as appropriate)
Working headlights in correct location, switchable number boards at both ends and cab interior headlight
Metal Knuckle Couplers
All units come equipped with DCC/ESU LokSound
N Scale Barber Roller-Bearing Freight Car Trucks - w/ 36inch Wheels (1 Pair)
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) #699623
Special paint scheme identifying a car with two rotary couplers!!
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
N Scale 4-Bay Cylindrical Grain Hopper - Scoular #1687
Features include:
- NMRA profile wheels
- needle-point axles
- body-mounted E-Z Mate(R) Mark II couplers
Flat Brushable Acrylic - Natural Wood - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
HO RTR ACF 4650 3-Bay Hopper - Penn Central #886729
Date: NEW 11-65
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO GMD-1 - DC/Silent - Canadian National (1900s Noodle w/ Black Cab) #1908
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
HO PC&F 5241 CUFT - Boxcar - Saratoga & North Creek (SNC) - Single Car #3285
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO RTR FMC 3-Bay 4700 Covered Hopper - Western Pacific #12065
Detailed Information
MODEL FEATURES:
Separately applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, brake cylinder and triple valve
100-ton trucks with 36inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
Factory applied roof walk, roof hatch, end details, ladders and wire grab irons
Two outlet grate variations
Accurately painted and printed on a highly detailed, injection molded body
Window packaging for easy viewing
Minimum radius: 18inch
See-through etched metal end platforms
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Interior plastic blister safely holds the model for convenient storage
All 3-packs feature unique road numbers
1/4 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 1/4 inch
HO G2 SD80MAC - DCC & Sound - Conrail #4108
Detailed Information
CR FEATURES:
As-delivered paint scheme
Front and rear operating red marker lights
Leslie 3-chime horn
Small EMD front plow
Pilot mounted front ditch lights
In 1995, Conrail placed an order for 30 SD80MACs, being the sole original purchaser. They were painted like the then-recently delivered SD70MACs. This would end up being the last new locomotive order CR would place before they were split up between CSX and NS in 1999.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
CV chart included in the box
Lumberjacks - Scenic Accents(R)
HO AutoScenes - Bad Boy Bikers
Three bad boys, complete with tattoos and ponytails, set ready to ride on their custom choppers.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
HO 60ft PS Flatcar - Trailer Train/HTTX #90850
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
N Scale Laser-Cut 2-Lane Curved Wood Grade Crossing - 28-32in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights.
HO 37ft General American Meat Reefer - Oscar Mayer (Largo Logo) #66058
Rapidos 37ft Meat Reefers Feature:
- Complete underbody with all piping
- Super-detailed Barber S-1 trucks
- (Insulated turned blackened metal wheelsets)
- Accurate roof hatches and hardware
- See-through brake platforms
- Separate grabs, ladders and roofwalk
- Accurate paint schemes
- Multiple car numbers per scheme
- Factory-installed Macdonald-Cartier couplers
- Available in singles or multi-packs.
HO 39ft Trinity 3281 2-Bay Covered Hopper - VTG North America/VTGX #350008
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- In service from late 1990s to the present
- Built especially for heavier materials including fracking sand, cement, bentonite and more
- Separately applied brake gear, running board, discharge gates, inlet hatches and end ladder cages
- Correct 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Maxi I Well Car - 40 Ft- 5 Car Set - Early - K Line/ Rail Bridge #1005
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched walkways
Separately applied brake piping and trainline hoses
Fine ladder detail
Delicate cross-bracing on the floor
Weighted for optimum performance
Razor sharp painting and printing
Prototypically correct 33 In and 38 In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry lower shelf operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18 In
HO Greenville 86Ft Quad Plug Door Box Car - Delivery 12-1969 - GTW #305738
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Grand Trunk Western (GTW) -Delivery 12-1969- is notable for several reasons. First, the classy GTW scheme looks especially good on this car (in our humble opinion) with the large GT logo centered between the paired doors. Second, GTW was the largest purchaser of Greenvilles quad door box car design, making them highly statistically relevant for modelers in the US and Canada. Painted in the characteristic GTW blue color with white stenciling, these cars are sure to be crowd pleasers and were seen widely. The GTW cars feature their as-built 1969 appearance that includes Gypsum crossover platforms, Ajax brake hand brake housing, Greenville-applied tack board locations and that beautiful End-of-Car Cushioning underframe setup. 70-Ton Trucks with 33inch wheels and rotating -Benco-6- roller bearing caps finish off this dominant offering. Our GTW masterpieces are available in eight different numbers.
Tru Color Paint - Acrylic - Engine Maroon - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
Bob Smith Industries 141 Foam Cure, 30ml
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Maine Central - Pine Tree #801
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO 60ft Bulkhead Flatcar - CLC (3pk)
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
HO 57Ft Mechanical Reefer - Burlington Northern (BNFE) #780398
Product Information
Move all kinds of perishable products on your HO railroad with WalthersMainline 57Ft Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s. Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including:
One time run of these roadnumbers, order now - limited quantity available
Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
Keystone or Hydra-Cushion underframe detail as appropriate
Short ladders and low hand brakes
9Ft Youngstown plug door with separate latch bars
Authentic Stanray peaked, ribbed roof with capped exhaust stack
Detailed underbody with brake gear and fuel tanks
70-ton roller bearing trucks
Correct 33Inch RP-25 turned-metal wheelsets
Proto MAX metal knuckle couplers
Medium Spikes 800 pcs
Spikes for handlaying track. Suitable for most scales - will look prototypical for On3/0. Also suitable as a larger sized spike choice for HO scale handlaid trackwork (easier to work with than the small spikes).
Package of approximately 800 pieces. 3/8 In length.
Walthers HO Scale Main Street Cleaners Kit
5 x 4-7/8 x 5-1/2in
12.7 x 12.4 x 14cm
Product Information
Keep those suits and dresses looking like new when you have them taken care of at Main Street Cleaners Designed for simple snap-together construction with little or no gluing needed, window mullions are molded into glass for true to scale appearance. Parts are also molded in realistic colors so no painting is needed. Other features include:
Perfect for rural store or city business
Walls and trim molded in realistic colors as one complete part - no painting needed!
LED interior lighting included
Simple snap-together construction with minimal gluing
Window mullions molded into glass for true to scale look
Perfect for steam, diesel and modern layouts
Classic wooden structure
Full-color printed drapes and window detail sheet
Sign decals for four different businesses
Molded in two colors and clear plastic
Walthers Cornerstone HO Art Deco Highway Underpass
Used on US streets and highways since 1930s
Many still in service today
Authentic Art Deco Design
Use for single or multi track rail line
Detailed bridge deck
includes printed signs
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21200
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO 50ft PS-2 CD 4427 Covered Hopper - Santa Fe/ATSF #302930
Add a signature car to your covered hopper fleet with the Walthers Mainline 50ft Pullman-Standard PS-2 CD 4427 3-Bay Covered Hoppers!
Fully assembled and finished in a variety of colorful schemes perfect for 1960s to early 2000s layouts, features include:
-Limited edition - one time run of these car numbers!
-Prototypes handled all types of grains, feed and similar loads
-Matches prototype dimensions
-See-through running boards
-4-3-4 exterior rib pattern
-Bottom outlet gate details
-Placard name plates as appropriate
-Correct 36in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO 60ft Gunderson Boxcar - TBOX/Forward Thinking #663640
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Fully assembled and ready-to-run
- Razor sharp painting and printing
- Weighted for optimum performance
- 36 inch metal wheels with RP25 contours
- Minimum radius: 18 inches
HO GP18 - DCC Ready - Grand Trunk Western #4704
Detailed Information
GTW FEATURES:
Winterization Hatch
Beacon
Bell mounted on long hood end
Sinclair antenna
Separate, optional ACI labels
Canadian style handrails
Separate, optional spark arrestors included with model
These units were part of an 8-unit order that arrived on the GTW in February 1960. They were part of the general freight pool of locomotives and were often seen working with their GP9 predecessors.
GP18 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Accurately-painted and printed paint schemes
Body-mounted McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
Acrylic Flat Colors - Flat Red - 3/4oz (23mL) Bottle
XF-7
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO GE 44 Tonner Phase Ic - DC/DCC/Sound - Boston & Maine (Minuteman) #117
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
HO GP38-2 - DCC/Sound - EMD Lease #825
EMDX FEATURES:
- Built as Penn Central
- Lighted class lights
- Lighted number boards
- Correct horn per road number
- Short fuel tank
- Sinclair antenna
ROAD NUMBER SPECIFIC FEATURES:
#788
- Ex-CR #7988
- mid phase w/ chicken wire grilles
- Operation Lifesaver
- Leslie 3-chime horn
- front small EMD plow
- rear Weed-cutter plow
- unique scheme
#813
- Ex-CR #8013
- mid phase w/ chicken wire grilles
- 4-stack exhaust
- Nathan 3-chime horn
- front small EMD plow
- rear Weed-cutter plow
- black fuel/air tanks
- small cab numbers
#825
- Ex-CR #8025
- mid phase w/ chicken wire grilles
- Nathan 3-chime horn
- front Weed-cutter plow
- maroon fuel/air tanks
- large cab numbers
- named The Kristen
GP38-2 SERIES LOCOMOTIVE FEATURES:
- Operating Class Lights
- Operating Number boards
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
85ft General American G85 Flatcar - Trailer Train - GTTX - Yellow #300438
Product Information:
Limited edition - one time run of these road numbers
Prototypes handled trailers and containers from 1961 to mid-1980s - used for general service loading into the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in up or down position or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
33In turned metal wheelsets
Proto MAX metal knuckle couplers
Add more realism in minutes with SceneMaster trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24In
HO Double-Track Railroad Bridge Stone Abutment - Resin Casting
DIMENSIONS:
Approximately 5 x 3/4 x 5-7/8 inches
FEATURES:
- Common prototype design used with various types of bridges
- Fits steam, diesel and modern-eras
- Highly detailed parts
- Use with Cornerstone double-track bridges
Rapido 753111 - HO New Look Bus - GO Transit (Toronto) Late - York Mills Subway via Yorkdale - Deluxe #1050
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
HO MLW M420 A/B Set - DCC & Sound - British Columbia (Lightning Stripe) #646, 682
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO GP9 - DCC & Sound - Chesapeake & Ohio #6182
ETA: May 2023
Detailed Information
C&O FEATURES:
Short hood mounted bell
Forward 5-chime horn
Dynamic brakes
Tall exhaust covers
Expert approved art
Between 1955 and 1957 C&O bought 363 GP9s. These units were the backbone of the fleet, used on both road trains as well as local service. In the mid 60s C&O adopted a new simplified paint scheme with the large C&O initials on the long hood. Although the purchase of newer high horsepower units displaced many GP9s to secondary service, most of the fleet soldiered on into the mid 80s. Many units were retired in this version of C&O dress. These road numbers lasted into the mid 1980s which allow the widest range of modelers to benefit from this release.
ROAD NUMBER SPECIFIC FEATURES:
#682
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#683
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#688
Dynamic brakes
bell mounted on long hood
#690
Dynamic brakes
bell mounted on long hood
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO RTR 53Ft Duraplate RoadRailer Trailer - Norfolk Southern (Triple Crown-CN Decal) #361129
Norfolk Southern, ex CN, Grey with CN decal halo
Triple Crown Medium Logo
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
HO UAC TurboTrain Additional Coach: Late Amtrak
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model.
HO Just Plug Lighted Vehicle - City Classic
Simple, yet elegant, this classic car likes to strut its stuff down main street for all to see!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
Kadee SF Shelf Whisker Metal Couplers - Medium 19/64 in Centerset Shank
119 SF Shelf Whisker Metal Couplers - Medium 19/64 in Centerset Shank with #242 draft Gearboxes 2pr - Kit.
HO Union X-3 Tankcar - UTLX (1920s Paint) #33471
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO Enterprise 2-Bay Covered Hopper - Canadian National (CNR Delivery) #113025
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO Spur & Yard Track Derail w/Switch Stand & Two Styles of Posts & Decals (1 Set)
HO 53Ft Gunderson Husky-Stack Well Car - TTX (As Delivered) (2pkg) #645547, 645978
Does not include containers
Road Numbers Include:
645547
645978
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
HO Scale NSC 73Ft Centerbeam Flatcar - BNSF #563114
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
Enamel Product.
This enamel wash is specially designed to bring out the details in gray warships typical of many nationalities from the Kriegsmarine, United States Navy, or Imperial Japanese Navy. Also it can be used in other subjects such as aircraft or gray tanks. The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows.
The excess of the wash can be easily removed with a clean brush and White Spirit.
5/8 inch Open Web Truss - Warren Style (1pc)
Excellent for towers and booms. Also good for roof trusses, bridges, conveyors, and space frames. Tee flange on one edge only allows easy registered assembly for triangular and square sections as pictured at left. Protruding side of flange may be removed if desired. Precision Injection Molded in Dark Gray ABS Plastic.
Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
5/8
HEIGHT IN MM
15.9mm
WIDTH IN INCHES
1-3/32
WIDTH IN MM
27.8mm
THICKNESS IN INCHES
11/64
THICKNESSS IN MM
4.4mm
LENGTH IN INCHES
11
LENGTH IN MM
275mm
Cushion Underframe Coupler Lift Bars - Type 1 - 4 Pairs
This parts package includes four pairs of unpainted Tangent Scale Models etched metal coupler lift bars for cars with cushion draft gear.
While the shape of lift bars can change from car to car, these coupler lift bars are used on our PRR Shops X58 box car and are potentially suitable for any model. These are great parts to have on hand!
HO Greenville 86Ft Quad Plug Door Box Car - BS-84 Claytor Repaint 1987+ - Southern (NS) #42409
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Southern (SOU) NS-era -BS-84 Claytor Repaint 1987+- is a very common 1980s paint job in the world of auto parts cars, this one for the Norfolk Southern (NS) system. After the NS merger, NS continued to paint cars in pre-NS schemes, this -Claytor scheme- repaint included. The Southern cars were built in February of 1970 as part of a lot that included the distinctive Center-Of-Car cushioning details. We have duplicated those same features underneath and on the ends, with the extended draft gear. The Claytor repaint features the original Apex crossover platforms with a Universal brake stand and brakewheel. Check out those gorgeous new 70-Ton Barber S-2 Birdsboro Foundry trucks with rotating -Timken- roller bearing caps, just like the prototype. These beauties are available with four road numbers!
Iowa Scaled Engineering - ProtoThrottle Short Red Handle
Upgrade your ProtoThrottle with this premium handle! Includes one (1) short red plastic handle, typically used for the brake lever. The handle is 3/4" long.
HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) (6pkg)
6-Pack includes the following numbers, all individually packaged: #485424, #485444, #484476, #484587, #484643, #484985
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO B-50-15 Boxcar - Rebuilt w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #15564
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
HO USRA Single-Sheathed Boxcar: C&O
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Evergreen Scale Models 4083 .083in Opaque White polystyrene Novelty Siding (1Sheet)
HO GMD SD40-2 - DCC & Sound - Canadian Pacific: Rebuilt #6025
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO NSC 60ft Ingot Flat Car - RTAX Ebenezer Railcar Services
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
Morning Sun Books Inc. Minnesota Mining Railroads in Color Volume 2
Minnesota Mining Railroads in Color Volume 2 from Morning Sun Books is a look at two iron ore hauling railroads, Reserve Mining Company and Erie Mining Company, plus their successors. These two private industrial mainline railroads were constructed in the mid-1950s to support new taconite iron ore processing operations and fielded a wide variety of first generation diesel models. This volume covers the history of these operations as well as locomotives and rolling stock!
N Scale Scenic Accents - Tombstones (11/pkg)
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Penn Central Rack, Trailer Train Flatcar (TTBX) #961934
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO Scale - 1951-55 White Freightliner Tandem Axle Day Cab Tractor - Unpainted and Resin Cast Kit
1/2 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 1/2 inch
German Gray Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - DEAX #11133
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO SP 3/4 Dome-Lounge w/Fluted Sides - Southern Pacific (Daylight) #3605
-Shasta Style
Rapidos SP Dome Lounge Cars Features:
Designed from original blueprints and field measurements of existing cars
Two fully-detailed interior configurations
Multi-colour interior decoration
Two underbody arrangements
Accurate interior and exterior paint and decoration
Full flicker-free track-powered interior lighting
Lighting (prototypically) in the dome roof
Accurate free-rolling trucks
Metal magnetic knuckle couplers
HO SP C-40-3 Steel Cupola Caboose - Southern Pacific (Serif with Underline) #1183
1946+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
N Scale ACF 3560 Center-Flow Covered Hopper - Chessie System (C&O) #601322
Features:
Prototypical painting and lettering
Plastic body with die cast chasis
Removable coal load
Product Information
The Atlas Trainman ACF 3560 Center-Flow Covered Hopper is based on common steel cars used by many railroads for handling potash, fertilizers, chemicals and more. It features an injection-molded body with applied plastic details where appropriate, smooth paint, crisp lettering and AccuMate(R) knuckle couplers.
LOCOMOTIVE FEATURES:
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
Spray Can - Pure Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Drill Bit #74 - 0.0225inch Diameter (2 pkg)
Product Information
Walthers Drill Bits are the right tools for all kinds of hobby projects, from detailing locomotives and cars, to scratchbuilding, wiring and more. Theres a full range of common wire gauge - jewelers drill bit sizes from number 80 to 43, and each pack includes two ready-to-use bits. Walthers miniature hardware is a complete range of ready-to-use parts and tools for hobby projects, including wood, machine and nylon insulating screws, plus appropriate hex nuts and washers, in assorted standard sizes (machine and wood screws may be brass or brass plated). Drill Bits are part of the line of Walthers miniature hardware and tools.
HO EMD SD70ACe - ESU(R) Sound & DCC - BNSF Railway #9392
(H3; orange, black, yellow; High Headlight)
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Thousands in service from 2005 to the present
- Fully assembled
- 21-pin DCC plug
- Easily handles 18 inch radius curves (22 inch or larger recommended)
- Six powered axles per unit
- Molded drill starter points for grab irons - easily added with the EMD Diesel Detail Kit (910-251, sold separately)
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
Equipped with ESU Sound for DCC and DC layouts featuring:
- 4 function outputs with brightness control by CV
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch prime mover sounds
- Compressor
- Dynamic brake
- Multiple realistic LED lighting effects
-High or low headlights per prototype
- Working front ditch lights
- Constant and directional lights
Same powerful drive as WalthersProto(R) locos featuring:
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant and directional LED lights
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
GP40-2 - DCC & Sound - DT&I #409
Detailed Information
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; were excited to include new features often requested, to the GP40-2 and upcoming Genesis models.
DT&I FEATURES:
Chickenwire radiator grills
Front & rear drop steps & footboards
Gong bell on nose
Pilot grabs
Illuminated strobe (effect on DCC+sound version)
No dynamic brakes
2600 gallon fuel tank
Firecracker antenna
Nathan M3 horn
All-weather window on engineers side
DT&I style extra grab irons on nose
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
PROTOTYPE SPECIFIC INFORMATION
By the early 1970s, many first generation diesels were reaching the end of their service lives. The most common replacement locomotives became the GP40-2. EMD began production of the 16-cylinder, turbocharged, 3000 horsepower engine in 1972. These locomotive were developed for service where higher horsepower and faster service were preferable. A major feature for the GP40-2 was the introduction of the -dash 2- modular electrical cabinet. For more than 40 years, the GP40-2 has worked main line freights, locals, switching jobs, yard service, and helper service. Many remain in service today.
HO SD45T-2 - DCC & Sound - Bessamer & Lake Erie #905
Detailed Information
BLE FEATURES:
Cab headlight with upper gyralight (Operates in DCC mode)-unique to BLE
Standard window cab
Leslie 3-chime Horn on long hood
Pilot mounted front ditch lights
Small front anticlimber
In the early 2000s, BLE went on the used locomotive market looking for heavy and reliable motive power. They purchased 11 former SP/SSW SD45T-2s designating them as SD40-3s. These units were rebuilt with the removal of the SP nose headlight, -L- window cab, and large front plow. Additions included front ditch lights, a unique BLE-style cab headlight with upper gyra light and lower standard headlight, MU catches on the front pilot, and the horn being moved to the long hood.
SD45T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Photo-etched windshield wipers
Separately applied air tanks
LED Lighting
HTC truck sideframes
See-through cab windows
Welded electrical cabinet air filter box
All-wheel electrical pickup
See-through dynamic brake fans
Separately applied wire grab irons
Rubber trainline and MU hoses with silver ends
Standard late Dash-2 cab with or without -L- window per prototype
See-through radiator grilles with new rear truck gearbox specific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry operating scale knuckle couplers
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Chassis accepts Genesis motor retro fit kit for an even higher performance motor.
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Highly-detailed, injection molded body
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Economi sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO Greenville 86ft Double Plug Door Box Car - PRR #110047
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: October 2021
Pennsylvania Railroad (PRR) X60B -Delivery 1964- 1965+ Era is our first PRR offering in the Greenville auto parts world and of course PRR purchased a large group of 145 cars prior to the PC merger. Painted in the characteristic PRR freight car red colors with large PRR keystone and gold -Cushioned Load- stenciling, these cars are sure to be crowd pleasers and were seen widely. The PRR prototype car was modified in 1965, with the removal of the roof running board, the lowering of the Miner brake wheel housing and removal of high grab irons and end ladders. If you look closely, you can see all of these -remnants- on the sides and ends of the model. Even the roof on the model features the old bolt locations of the running board supports! 70T Trucks with 33inch wheels and rotating -Timken- roller bearing caps finish off this X60B offering. Our PRR masterpieces are available in six different numbers. PRR/PC/CR fans rejoice, if you model prior to about 1985 you need these!
Tru Color Paint - Flat Brushable Acrylic - Black - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
HO Scale H1b Hudson Steam - DC/DCC Ready - Canadian Pacific (Beaver Shield) #2807
-Late walkway w/smoke deflectors
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
Spray Can - Navy Blue (US NAVY) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Yellow) #505070
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
Evergreen Scale Models - Opaque White Polystyrene H-Column .080In x 14In (4 pcs pkg)
HO EMD SW9 - DC/ Silent - New York Central (NYC As Delivered) #8930
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
Rock Molds Layered Rock
Highly detailed, flexible and durable rock molds can be used to cast small boulders, rock outcroppings, top rocks for fields and creeks, or make entire rock faces by combining castings produced with these molds.
Athearn - HO RTR PS-2 2600 Covered Hopper - Burlington Northern #430211
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
X-2 Mini Acrylic - White - 10mL Bottle
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or airbrushing. These paints can be used on styrene resins, Styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.
When airbrushing be certain to use any of the following Tamiya thinners: Items-81020, 81030, 81040, 81520, 87077.
Tamiya bottle paint label meanings and quick tips:
- X appointed colors have a glossy finish while XF designated colors are flat finish.
- The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
- Items 81521 and 81021 (Tamiya X-21 Flat Base) can be used as a flattening agent on Tamiya Gloss bottle paints. Simply add any X-gloss color then add flat base. Mixing ratio: 1:1
- The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
- For better paint brushing results use Tamiya Paint Retarder (item 87114) for a smoother brushstroke free finish.
HO ALCo RS-3 - DCC/Sound - CP (Script) #8441
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO Trinity 3230 Covered Hopper - Lafarge North America (LAFX) #60164
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
Softcover, 96 Pages - Full Colour Pictures
Detailing and Upgrading Steam Locomotives from Kalmbach is a treasure trove of information about improving your steam power. The late steam and steam-to-diesel transition eras are very popular with model railroaders. This book is a single reference guide for upgrading, detailing, modifying, and maintaining steam locomotive models. This book includes an overview of steam locomotive types, histories and how they work. It also offers tips and techniques for upgrading and repowering older plastic and brass models as well as adding DCC and sound; weathering and modifying detailing to reflect various steam locomotives. Softcover, 96 Pages
HO Hawker-Siddeley Van - Caboose - Canadian National - As-Delivered (Red/Orange Steps) - #79207
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
4785 PS2-CD Covered Hopper - Early End Frame - Penn Central - Green Repaint #886859
HO Metro Power & Light - Kit
DIMENSIONS:
Generating Plant 13-7/8 x 10 x 13 inches (35.2 x 25.4 x 33cm)
FEATURES:
- Typical of 1970s-and-later coal-fired power plants
- Realistic design in a size that fits most layouts
- Detailed corrugated-metal siding
- Tall smokestack
- Molded in three colors and clear plastic
- Model a complete power grid with the Cornerstone Metro Power & Light (933-4052), Northern Light & Power Powerhouse (933-3021), Northern Light and Power Substation (933-3025), High-Voltage Transmission Tower (933-3121), SceneMaster Electric Utility Pole Set (949-4120) and assorted Utility Trucks (949-11636 to 11895), each sold separately
HO Alco FA-1 - DCC & Sound - Great Northern #440D
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO RTR Trinity Rail 3281 Cu Ft 2-Bay Covered Hopper - St. Lawrence Cement SLCX #2
(2007; gray, Yellow Conspicuity Marks)
Product Information
This HO Scale TrinityRail 3281 Cu.Ft. 2-Bay Covered Hopper is based on a common late-1990s and later prototype commonly used to haul frac sand, roofing granules and similar materials. With the boom in frack sand traffic it isnt uncommon to see these prototypes used in unit trains. Prototype cars measure 41ft-11inch long, and the cars are equipped with three or five round loading hatches and a pair of gravity outlets for commodity off-loading. Compared with earlier 2-bay covered hoppers, these cars are distinctive. Notably, an overhanging arched roof, heavy top reinforcement stiffener, and folded jack pads at the bolster are spotting features for the Trinity 3281. This design has proven to be popular with shippers and railroads alike. The HO scale freight car features an injection-molded body, applied wire grab irons, photo-etched walkways and working shelf-type knuckle couplers without trip pins for scale appearance. Other details include roadnumbers printed on the truck sideframes, coupler cut levers, NMRA compliant car weight, trucks with spinning bearing caps, multiple roadnumbers per scheme and graffiti on select roadnumbers.
N Scale Butterfly-Style Station Platform Shelter - Kit (8)
DIMENSIONS:
6-1/8 x 1-1/4 x 1-3/8 inches (15.3 x 3.1 x 3.4cm) each
The kit includes parts for eight complete platforms and features a modular design so you can combine multiple kits to make longer platforms. Wooden walkway crossings between tracks, platform benches, detailed steel columns, platform signboards and realistic details are all included.
Ideal for use with any steam, transition or diesel-era layout, Butterfly-Style Station Platform Shelters look great alongside Union Station (933-3257, sold separately) and other Cornerstone N Scale railroad buildings.
- Great for steam or diesel-era layouts
- Modular design allows easy expansion with additional kits, sold separately
- Molded in appropriate colors
- Includes benches, wooden cart crossings, signboards and other details
- Easy-to-build plastic kit
HO 85ft ACF Dome Lounge Coach w/lights - Union Pacific (Harriman) #9004
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
As UP transformed its Streamliners into Domeliners in 1955, 15 new Dome-Lounge Observations were delivered to bring up the rear of the flagship streamliners. Within a year however this proved to be a problem. The cars quickly lost their unique ends and were rebuilt as Dome-Lounges. Named for the famed UP-SP-CNW Streamliner, the prototype has its original windows and lighting for use at the end of the train.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - IWXX (Hunter Green) #220020
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO C425 PH2 DCC Sound BC Rail
FEATURES:
- C425 Phase 2 models include cab with either horizontal or vertical headlights per the prototype
- Models include redesigned AAR style truck sideframes with separate brake cylinders and separate bearing cap detail (included when appropriate per the prototype).
- Directional lighting w/ golden-white LEDs
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Factory-equipped with AccuMate knuckle couplers
- Analog version features NMRA 8 pin plug for DCC
- Separately-applied wire grab irons, ladders, and drop steps
- Separately-applied marker lenses
- Improved painting and printing w/painted handrails
- Two painted crew members
Sound Features for Gold Series:
DCC Operation
- Supports all DCC-programming modes
- Flexible mapping of function keys F0 to F28.
- A total of six DCC function outputs are available
- Follows all NMRA DCC standards and recommended practices.
Analog (DC) Operation
- The LokSound Select Dual-Mode decoder allows your Atlas Gold Series locomotive to be used on DC as well as on DCC layouts.
- Please note that the Atlas Quantum Engineer will NOT operate an Atlas Gold Series locomotive equipped with a LokSound Select decoder on an analog (DC) layout. However, the sound and lighting functions of the LokSound Select decoder in the Atlas Gold Series C424/425 locomotive can be controlled by an easy-to-use basic DCC system.
- Also note that on a DC-powered layout, a DCC and sound equipped locomotive (such as the Atlas Gold Series C424/425) CANNOT be consisted with another locomotive that does not also have both DCC and sound. (This statement does NOT apply to DCC-equipped locomotives operating on a DCC layout.)
Sound Functionality
- Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
- There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
HO Alphabets - Extended Railroad Roman - Black - Waterslide Decals
Description: (formerly 87-80-2) Alphabets - Extended Railroad Roman - Black - Waterslide Decal
HO 85ft General American G85 Flatcar - GTTX (Brown) #300316
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
HO Horizon Coach - Amtrak (Phase Vl) #54511
PHASE SPECIFIC FEATURES:
- 68-seat coach interior
- Modified parlor end-doors
- Fixed end-door steps
GENERAL FEATURES:
- Coach, Dinette, Club-Dinette car body styles
- All-new ADA Coach cars
- All-new car numbers
- Full underbody and interior detail
- Correct GSI G70 trucks with metal wheelsets and reliable power pickup
- Accurate painting and lettering
- Tinted windows
- Improved interior lighting in both DC and DCC
- Independently-controllable end marker lights
- Metal side grab irons
N Scale - Picket Fence (Scale Model) Kit
PLEASE NOTE - This product is a miniature scale model / toy, not an actual fence.
Detail N Scale backyards, gardens, parks and more with this SceneMaster kit! Detailed plastic parts simulate wood construction and color, and include gates and wall sections. The kit builds up 31inch 79cm of fencing.
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) (6pk) #1
Includes the following numbers, all individually packaged:
#652830
#652855
#652884
#652900
#652921
#652954
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO FMC 60ft Hi-Cube Ex-Post Boxcar - CP Rail/MILW #620
MODEL FEATURES:
- Single 10ft Youngstown door
- Separately applied grab irons, end ladders, and brake wheel
- Photo-etch coupler cross-over platform
- Highly-detailed, injection-molded body
- 36 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Minimum radius: 18 inches
HO RTR 53Ft Duraplate RoadRailer Trailer - Norfolk Southern (Triple Crown) #466707
Norfolk Southern
Triple Crown Medium Logo
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
HO Lightweight Coach - BC Rail - #156230 / Porteau
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO 70-Ton 12-Panel Hopper - Pennsylvania (H39 Bethlehem Blt.) #667291
Blt.2-60
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Western Pacific #20189
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Acrylic Flat Colors - Red Brown - 3/4oz (23mL) Bottle
XF-64
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO NSC 64 Ft 6000 Cubic Gondola HS - MWCX #102858
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Morgan Olson Route Star Van - Police - Crime Scene Investigation
Modernize HO highways in minutes with these new Morgan Olson(R) Route Star Van replicas! Based on the popular delivery vehicles seen from coast-to-cast, these layout-ready models include a wide range of details and colorful printed graphics. Check out these other great features:
Newly tooled officially licensed replica!
Contemporary delivery vans and food truck versions!
Five authentic body styles with correct rear doors
Prototypes seen all across North America serving small businesses & fleet operators
Fully assembled
Full-color graphics
Detailed driving compartment w/interior bulkhead
HO FMC 60ft Hi-Cube Ex-Post Boxcar - GTW #384736
MODEL FEATURES:
- Single 10ft Youngstown door
- Separately applied grab irons, end ladders, and brake wheel
- Photo-etch coupler cross-over platform
- Highly-detailed, injection-molded body
- 36 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Minimum radius: 18 inches
PRLX ex Warbonnet #236
Expected in November 2020
Locomotive features:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Sound equipped models also feature:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PRLX features:
All PRLX locomotives are Primed for Grime with road numberspecific patches and fading
Many of BNSFs SD75Ms were in storage by 2014-2015. The 20plus year old units were definately past their prime at this point, however, most of them still had a future. Norfolk Southern bought a total of seven units, to become NS 2800-2806. In addition, Progress Rail Leasing (PRLX) bought a large group of the units. They arrived to PRLX wearing several paint schemes, including the Santa Fe Warbonnet as well as BNSFs Heritage II paint. The units were hastily patched and placed into service, as of this writing they are leased to CN and KCS, but future leasing assignments are likely.
Primed for grime models feature:
Duplicated look and feel of -In Service- equipment, -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per roadnumber matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
HO FMC 4700 Covered Hopper - UNPX #121061
MODEL FEATURES:
- Separately-applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, -brake cylinder and triple valve
- 100-ton trucks with 36 inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
- Factory applied roof walk, roof hatch, end details, ladders, and wire grab irons
- Two outlet grate variations
- Accurately painted and printed on a highly detailed, injection molded body
- See-through etched metal end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- All 3-packs feature unique road numbers
- Minimum radius: 18 inches
HO Bathtub Coal Gondola - DREX (ex-CP) #1023
Built: 5-05
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO ALCo RS-3 - DCC Ready - CP Rail (Multi-Mark) #8435
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO RTR ACF 4650 3-Bay Hopper - Golden West #GVSR 525035
Built: BLT 6-90
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
1941-46 32Ft Fruehauf 32Ft Fruehauf Bekins Moving Van Resin Cast Kit
HO Scale Thrall 53Ft Articulated Well Car Set - TTX (Forward Thinking Small) #728475 (3pkg)
Features:
Each car consists of three wells--A,B & C.
Walkway variants specific to prototype
Etched metal detailing
Detailed air reservoirs
Detailed brake valves
Sharp hand grabs and stirrups
Runs on 18inch radius
Recommended for 22inch radius
Floor pin holes for Atlas and other brands of containers
Product Information
When the domestic intermodal container market settled out in the late 90s, the 53Ft long container emerged the winner. Car builders responded with new wells of like size to accommodate the new standard. Introduced in series service in early 2000, Thralls triple 53Ft articulated well car was certainly the best looking of the 53Ft wells. Angular wheel cutouts, 3 flared-bottom wide and 8 narrow side posts give this intermodal age well car character.
HO EMD GP7R - DC/DCC Ready - Chicago & North Western CNW #4140
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
CNW FEATURES:
NEW! Non-Dynamic with roof access hatches
1700-gallon fuel tank
Partial skirting above fuel tank
All-weather firemans side window
Flashing xenon strobe (in DCC mode only)
Wheel bearings per prototype
Era: 1982+
Era: 1993+
Era: 1982+
Chicago & North Western-
-Union Pacific Licensed Product
These Ex-CRI&P units were purchased by C&NW second-hand from Precision National in 1981, serving the railroad in a variety of service for the next 15+ years. 4160 became inoperable in 1998. In 2007 it was moved to the Illinois Railway Museum and repainted into the blue and white Rock Island paint scheme.
ROAD NUMBER SPECIFIC FEATURES:
#4140 Phase III body, 5-Chime Horn, Firecracker antenna, Front snowplow
#4160 Phase II body with 86inch Doors, 3-Chime Horn, Spark arrestors, Front snowplow
#4193 Phase II body with 86inch Doors, 5-Chime Horn, Front snowplow
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
N Scale Compact Unitrack Turnout R150-45 - Left Hand
HO 3600 Gallon Fuel Tank Set - EMD
HO Modern Fire Escape - Kit
Product Information
Add realism to your buildings with Walthers Cornerstone Fire Escape Kits. Each kit includes parts for up to four stories and parts come molded in an appropriate base color.
Must-Have Detail for City Buildings
Perfect for Post-WWII Scenes
Includes Fire Escapes to Serve Four Stories
Fits any Large Structure
HO Trinity 3230 Covered Hopper - CIT Group (CBFX) #440522
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
The Trinity 3230 Pressure Differential covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
N 4-6-6-4 Steam Challenger - DCC & Sound - Union Pacific #3933
ETA: October 2022
Detailed Information
Union Pacific
In the spring of 1941 UP locomotive designers began working on a locomotive to team up with the new 4-8-8-4 Big Boys then under construction at Alco. The Big Boys were designed to pull heavy freights up the Wasatch Range in Utah to the division point at Green River, WY. What was needed was a locomotive to take over at that point that could speed the freights eastward across the Wyoming Division. Building on their experience with the original CSA 4-6-6-4 Challengers UP and Alcos designers developed a newer and better Challenger type locomotive. The result was a group of 65 4-6-6-4 Challenger built in three separate groups during World War II.
ROAD NUMBER SPECIFIC FEATURES:
#3985
Modern Excursion version
Oil Burner
Era 1980s - 2000s
#3933
Coal Burner
Dual smoke stack
Tender bunker coal extensions
Era 1940s - 1959
#3967
Coal Burner
Dual smoke stack
Smoke Lifters
Era 1940s - 1959
#3997
Coal Burner
Dual smoke stack
Tender bunker coal extensions
Era 1940s - 1959
Union Pacific
UP painted several of their Challengers in their two-tone grey paint scheme for passenger service. They also added smoke lifters and converted many to oil burners as well.
ROAD NUMBER SPECIFIC FEATURES:
#3976
Two-tone grey w/ yellow lettering and striping. Oil burner
Dual smoke stack. Era: Late 1940s - Mid-1950s.
STEAM LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Full cab interior with boiler backhead with printed gauges
Individually applied piping, valves, generators, etc.
Operating eccentric cranks on both sides operating in correct direction
Headlights and indicator number boxes (number boards) with directional light change
Five pole, skewed armature motor with flywheel for smooth operation
Pivoting front and rear engines for negotiating 11inch radius curves
See-through running boards
See-through cab windows
McHenry scale knuckle couplers
LED Lighting for realistic appearance
Fully-assembled and ready-to-run
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum recommended radius: 15inch
SOUND EQUIPPED MODELS ALSO FEATURE
Tender-mounted DCC decoder with SoundTraxx Tsunami2 sound
Sound, units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, whistle, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 1937 AAR 40Ft Boxcar - CP5/5 Ends - Canadian Pacific (Spans the World) #227152
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO ET44 Tier 4 - DCC Equipped - CN Heritage/BC Rail #3115
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
PS-2 2003 2-Bay Covered Hopper - Denver & Rio Grande Western #18334
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
HO 68Ft Railgon Gondola - BNSF #518445
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
Tru Color Paint - Acrylic - Oxide Brown - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
BH1 Tsunami 2 Sound Decoder - EMD Diesel
Dimensions: 97 x 16 x 7.7mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 8 LED-Friendly Outputs!
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
Get an easy upgrade for your Bachmann Sound Value diesel models with our newest Tsunami2 decoder! The TSU-BH1 offers 8 LED-friendly function outputs so resistors are not required for LEDs! (See the wiring diagrams under product documentation for more information). Light effects are fully remappable and offer full access to our 20+ HyperLight effects.
This decoder is available in 3 sound profiles EMD, GE, and ALCO. For an easy install, simply replace the Sound Value decoder and enjoy all of the Tsunami2 features you love!
This decoder is designed to replace the factory board in the following Bachmann Sound Value Diesel Models: FA-2, FB-2, S-4, E7-A, SD70ACe, ES44AC, GP30, GP38-2, GP40, GP7, and SD40-2.
Fun Tsunami2 features including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and more. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+), couplers, and more!
This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127495
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO RTR 60Ft Flatcar - Union Pacific UP #52009
MODEL FEATURES:
Separately applied end details and brake wheel
33inch machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Decorated models fully-assembled and ready to run out of the box
Minimum radius: 18inch
G2 SD70M-2 - DCC Ready - VTR #431
Genisis 2.0 Features:
See-through pilot steps, Lit Marker Lights (CN)
LIT numberboards & ground lights
Detailed Information
VTR NOTES:
Starting in 2007, Florida East Coast leased four blue-and-yellow SD70M-2s for mainline service. When the lease expired in 2015, the units were purchased by First Union Rail and subsequently split between Vermont Railway and Providence & Worcester, with two units going to each railroad. Vermont Railways units were soon painted into that roads attractive scheme of red with white trim, and continue to see service on mainline trains today.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Etched see-through steps
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
85Ft RTR P-S Regal Series 4-4-2 Sleeper - Santa Fe (Regal Lake) #65
Business Train (Real Metal Finish)
Non Lighted
Product Information
Passengers on your WalthersProto Combined Super Chief / El Capitan are sure to have a memorable trip aboard the 85Ft Pullman-Standard 4-4-2 Regal series Sleepers! Santa Fe purchased 16 of these spacious sleepers fitted with four double-bedrooms, four compartments and two drawing rooms for postwar Super Chief service, which were later used on other name trains and served with Amtrak. Ready for operation or display, features of this WalthersProto replica include:
Real metal finish simulates stainless steel
Correct GSC 41-NDO Outside Swing Hanger trucks as used in the 1960s
Factory-installed grab irons
Prototypically accurate window tinting
Window gasket details as appropriate
Sprung operating diaphragms
Modeler-installed extended drawbars for 22Inch radius curves included
Turned metal RP-25 wheelsets and correct trucks with built-in electrical contacts
Proto MAX metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24Inch radius is recommended for operation.
HO Trenton Works 6348 CN Boxcar - Canadian National (w/ Conspicuity Stripes) #598244
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
N Scale 52Ft Mill Gondola - C&O Railgon #351360
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
Coupler Trip Pin Pliers
For HOn3, HO, S, On3 & O Scale Couplers. Adjust trip pin to the correct height by gently squeezing with these specially designed pliers. The pliers have jaw surfaces that are curved and smooth. Adjusting the height of your Coupler Trip Pins is easier because the pliers surfaces conform to the bend of the trip pins and prevent them from kinking when bending or straightening.
Spray Can - Dark Green (RAF) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
HO Amtrak NPCU Cabbage - DC/DCC/Sound - Amtrak (Phase V) #90229
The Rapido Trains HO scale Amtrak NPCU -Cabbage- features:
Fully powered, available in silent DC or DC/DCC/Sound
DC models are DCC-ready with a 21-pin plug
Accurate enlarged marker lights, supplementary air reservoirs and K5LA horn
Operating, flashing ditch lights
Operating strobe lights and marker lights
User-controlled operating number boards
Etched-metal radiator grilles and windshield wipers
Separate handrails and grab irons installed at the factory
Rapidos proven 5-pole, skew-wound motor and silky-smooth drive system
Metal, magnetic Macdonald-Cartier Couplers mounted at the correct height
Second release paint schemes include:
Amtrak Phase III
Amtrak Phase V
Amtrak Phase V -Downeaster-
Amtrak -Salutes Our Veterans-
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Atchison, Topeka & Santa Fe #88012 (ATSF Rack)
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO U33B - DCC/Sound - Guilford (Boston & Maine) #192
FEATURES:
- Flush-mounted radiator screens and air intake screens on the long hood - early phase
- Built-out area on the top of the front and rear pilots - early phase
- Corrugated radiator and air intake screens, with a flat pilot face - late phase
- Optional separate electrical equipment box will be included on the left side walkway behind the cab per the prototype
- AAR-B or Blomberg trucks will be used when appropriate
- Separately-applied detail parts including: windshield wipers, metal grab irons, coupler cut levers, fine scale handrails & more!
- Five pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Directional lighting with Golden-white LEDs
- Blackened metal wheels
ATLAS MASTER GOLD (DCC/SOUND):
- ESU LokSound decoder, supporting all DCC programming modes
- Flexible mapping of function keys F0 to F31
- Follows all NMRA DCC standards and recommended practices
- Lighting effects to match the prototype, including Gyralight and Mars light where appropriate
- Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO ET44 Tier 4 - DCC & Sound - Kansas City Southern #5001
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO EMD GP7 - DC/DCC Ready - Burlington Northern BN #1629
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
BN FEATURES:
Roof-mounted -Torpedo Tube- air tanks
Winterization Hatch
Cab-mounted Beacon (Functions in DCC)
Fire-cracker antenna
Roof-mounted steam era bell
The Burlington Northern Railroad came into existence in March 1970 when the ICC gave the ok for the Chicago, Burlington & Quincy, Great Northern, Northern Pacific and the Spokane, Portland & Seattle railroads to formally merge and form one company. One result of the merger was the creation of a large group of GP7s on the roster with different features. The two ex-Northern Pacific GP7s offered in this Genesis release came with roof top air tanks in order to equip them with larger fuel tanks to extend their operating range.
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Plastruct 91361 Tinted Mirrored Sheet - Bronze (2pcs pkg)
100x300x1mm
Evergreen Scale Models 4030 .030in Opaque White Polystyrene V Groove Siding (1 Sheet)
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - MRRX (6 pkg) #14
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
4806
4814
4819
4850
4864
4879
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
Factory installed Celcon handrails
Individually applied wire formed grab irons
5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
See-through cab windows
DCC Ready 21-pin NEM plug
LED Illuminated front and rear headlights
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brand of track
Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMDs most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
PROTOTYPE MANUFACTURER: EMD
Axles: 4
LIGHTED: LED Lighting
Minimum Age Recommendation: 14 years
Is Assembly Required: No
Diesel EMD SD40-2 - First Union Rail Leasing CEFX #3183
ESU LokSound DCC & Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
Tru Color Paint - Acrylic - Grimy Black - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
N Scale Just Plug Lighted Vehicle - Midnight Ride
Revved up and ready to go, this timeless coupe is ready for a night time cruise under the stars!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic. Add a vehicle to a Just Plug light hub for easy installation. Just plug and you are done!
20mA per Vehicle
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14130
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 89Ft Bethlehem Flush-Deck Flatcar - Santa Fe #296533
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers
HO Scale - 1966-77 GMC 9500 Low Mount Cab Tandem Axle Short Hood Tractor - Unpainted and Resin Cast Kit
EMD GP9 Phase II - LokSound 5 DCC & Sound - Union Pacific #267
(Armour Yellow, gray, red)
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today.
Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21-pin DCC plug
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
Based on engines in service from the 1960s to 1970s with:
Leslie S3L-R air horn on stand
Whip-style radio antenna
Mars dual sealed beam headlight
Short-hood forward operation
Working Western Cullen beacon
UP-style air vent
Canvas sunshades
Large armrest
HO Prairie Co-Op Elevator - Kit
Product Information
Grain elevators come in all shapes and sizes and the Walthers Cornerstone Prairie Co-Op Elevator kit will add variety to your grain handling scenes. Based on small-town producer elevators small four-silo structures can often be seen standing tall next to their wooden predecessors or related feed mills. Prairie Co-Op Elevator receives grain by truck and ships it out in covered hoppers or, in the late steam and classic diesel era, in grain-door boxcars. This kit includes the silos and headhouse, unloading shed, truck scales and various details to add realism to your layouts grain siding.
Classic small town terminal elevator
Typical of concrete elevators in use from 1915 to today
Used with all types of grain
Square design with four silos
Off-center head house
Cement block unloading shed
Cement block office with truck scale
Loading spouts for boxcars and covered hoppers
Separate dust collector, vents and sampling arm
Molded in white, light gray and clear plastic
Measures Elevator & Unloading Shed: 5-1/8 x 7-1/4 x 12inch (13 x 18.4 x 30.4cm)
Office: 4-3/8 x 3-1/2 x 2-1/4inch (11.1 x 8.8 x 5.7cm)
Athearn Roundhouse HO 50ft ACF Boxcar Ferrocarril del Pacifico #17732
Detailed Information
MODEL FEATURES:
70-ton Roller Bearing trucks with 33in wheels
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Body mounted McHenry operating scale knuckle couplers
Wheels with RP25 contours operate on Code 70, 75, 83, 100 rail
Minimum radius: 18in
Specifications
COUPLER STYLE: McHenry Scale Knuckle
HO Merchants Row I - Kit
Product Information
The easy-to-build Walthers Cornerstone HO Scale Merchants Row I kit brings together five different stores in one structure at a dynamite price. Often just a few blocks away from the railroad tracks, the business district is one of the most important parts of any small town or big city. This unique kit combines five storefronts into one space-saving structure that fits on almost any HO Scale layout. Add your personal touch to Merchants Row I with paint and the supplied full-color decals to create a one-of-a-kind model for your steam or diesel-era scene. Merchants Row I is one of many Cornerstone HO Scale businesses.
As shown the kit measures: 11 x 5 x 4inch 27.5 x 12.5 x 10cm
Five complete stores under one roof
Fits 1880s to present
Perfect for small town or big city
Use with other Cornerstone stores to model a complete business district
Colorful decal signs for a variety of businesses
Molded in two colors and clear plastic
HO Greenville 86ft Double Plug Door Box Car - Erie Lackawanna #92082
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: August 2021
Erie Lackawanna (EL) -Original 1965- represents the first of four Erie Lackawanna orders for Greenville 86ft Double-Door box cars. Delivered in 1965, this group of 100 cars featured Center-of-Car Cushioning with truck mounted brakes. This car includes the large spelled out Erie Lackawanna on the left side of the car, and a large gold -Cushioned Car- and large white Erie Lackawanna diamond logo at the right side of the car. We sweat the little details too – our model is equipped with an accurate Ajax hand brake, Apex crossover platforms and 70T trucks with 33inch wheels and rotating Timken roller bearing caps. Remember those truck mounted brakes mentioned earlier? Yes, our trucks have the correct truck mounted brake beam to match that important detail. Finally, this Erie Lackawanna offering was part of the Fords Chicago Stamping Pool, resulting in an accurate Chicago Heights, Illinois return route stencil. Our EL masterpieces are available in six different numbers. EL Fans rejoice!
HO USRA Single-Sheathed Boxcar: N&W
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Scale GP38 - DCC & Sound - Baltimore & Ohio #3824
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO GP9 - DCC Ready - Northern Alberta Railways #201
ETA: May 2023
Detailed Information
NAR FEATURES:
Winterization hatch
Canadian-style slotted steps and footboards
Canadian-style angled handrails
Bell mounted on the short hood
Peacock wheel hand brake
M-3 horn with all bells forward
Northern Alberta Railways rostered eleven total GP9s, numbers 201-211. The paint scheme depicted here was in use from 1965-1975. The road was jointly owned by CP and CN until 1981, when CN bought out CPs share of ownership. NAR GP9s could be found leading both freight and (with the help of a steam generator car) passenger trains.
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
HO Straight Sections - 4-1/2 Inches (114mm)(4pk)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes! Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation. Suitable for all types of layouts, whether temporary or permanent. This modular track system features an integrally molded roadbed for realistic appearance. Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
48Ft All Purpose Well Car - TTX #456262
Features:
Floor with correct ovals and cut-outs.
Two hitches
Etched walkways
Four IBC bins.
Detailed brake components
Prototypically accurate paint schemes
Recommended 24inch radius
HO RTR 70 Ton 2 Ballast Hopper w/ Side Chutes - Penn Central #51703
Blt. 9-55
Product Information
Perfect for work train service on our railroad, Bowser HO Scale ready-to-run 70-Ton 2-Bay Ballast Hoppers with Side Chutes (Ballast Gates) feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make these 70-Ton Ballast Hoppers welcome additions to any diesel-era freight train consist.
N Scale Dash 8-40CM - DCC & Sound - Canadian National: North America #2432
Our N Scale Dash 8-40CM model features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
Heavy, die-cast chassis with a powerful motor and dual flywheels
Operational headlights and rear lights with operational factory-installed ditch lights (plus rock lights on BCOL locomotives)
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
Factory-installed couplers mounted at the correct height
Athearn - N Scale 2 Bay 2600 Covered Hopper - Burlington Northern - #430211
Flush or overhanging roof per prototype
Etched metal roofwalks
Factory installed wire roofwalk grab irons
McHenry knuckle spring couplers installed
Weighted for optimum performance
Accurately painted and printed for prototypical realism
Minimum radius: 9 3/4 "
HO Consumer Product Signs - 1940-50s (42)
Consumer Product Signs 1940s-50s. Contains 42 full color posters and signs. HO Scale. Unique weathering and application instructions included in all poster/sign packs.
Coarse Turf - Conifer Green - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
HO Hyatt Bearings Cap (8pcs)
HO 70-Ton 12-Panel Hopper - Chesapeake & Ohio #151633
Blt.3-63
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO 40ft ACF Modernized Welded Boxcar - Green Bay & Western #610
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 85Ft General American G85 Flatcar - TTX (Brown) #300168
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
Trinity 3-Bay Hopper - DJTX, pkg(3)
ETA: October 2021
Detailed Information
MODEL FEATURES:
Two body styles represent 10-panel and 12-panel variations
New body styles N including BNSF with stiffeners
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Coupler cutbar and Air hose on each end
Separately applied end cages and etched end platforms
Photo-etched metal roofwalk
Weighted for trouble free operation
Machined metal wheels
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Standard size coupler draft gear box with screw mounted lid
Fully assembled and ready for your layout
Replacement parts available
Minimum radius: 18inch
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
PROTOTYPE AND BACKGROUND INFO:
Trinity Steel was founded by C. J. Bender in Dallas in 1933. The company didnt enter into the railroad freight car market until 1984, when Trinity acquired the railcar designs and production facilities of the Pullman-Standard Car Manufacturing Company, once the largest railcar manufacturer in North America. That same year Trinity also acquired the railcar designs of General American Transportation Corporation. In 1986 the rail car designs and production facilities of Greenville Steel Car Company were purchased, including the auto rack designs of Portec-Paragon. Also acquired in 1986 were the railcar designs of North American Car Corporation, and in 1987 Ortner Freight Car was acquired.
With this collective experience across several facilities, Trinity developed many new designs that became ubiquitous to present day railroading. One of their most famous designs is the 3-bay 5161cuft covered hopper. This covered hopper is optimized to transport agricultural products, sugar, dry chemicals, or other similar products and can be seen in unit train assignments all over North America. Introduced around 1995, these cars are extremely common today and owned by many Class 1 and short line railroads alike.
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1776
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
AK Interactive Streaking Grime
HO GE C30-7 - DCC & Sound - Union Pacific (Early Scheme) #2419
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
RTR 52Ft Mill Gondola, TFM pkg(3)
MODEL FEATURES:
Fully assembled and ready for your layout
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
33In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
Open top cars, such as gondolas, have been a mainstay on railroads for decades as they are ideal for carrying large, bulky loads such as coil steel or scrap metal loaded by crane.
Juneco Scale Models CN Wraparound Pilot
N Scale AutoFlood III RD Coal Hopper - CEFX - 6 pack #2
Contains Road Numbers:
600530
600547
600555
600568
600580
600593
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO ALCo RS-3 - DCC/Sound - Interstate #31
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200100
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
HO PS4750 Covered Hopper - SOO Line (Original 1-1980) #75490
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
SOO -Original 1-1980- brings back a popular PS4750 paint scheme. We offered a different 1979 group of SOO cars about 8 years ago (!) and ever since, our mailbox has been full of requests for MORE SOO. We are very pleased to finally offer another SOO lot, this time from the 400-car 1980 Pullman group. These covered hoppers feature truck mounted brake beams, a side-mount train air line and scale-sized Miner -Selflok- outlet gates. Painted in that special shade of -Soo Line White- (Soo modelers know exactly what we mean), the models show off the classic yellow wheat stalk graphics and green SOO LINE roadname. An accurate and critical car for SOO and CP Rail modelers and lovers of the PS4750 everywhere, these cars continue to serve in grain and in buffer car services.
N Scale Code 80 Wooden Tie Flex Track - Streamline - 25pcs
36inch 91.4cm Section
HO Detail Kit for Intermountain & Athearn SD40-2 Units, Most Railroads
Enamel Paint - Panel Line Accent Color - Light Gray (40mL)
Tamiya Panel Line enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml)
Examples of use:
Black is a general-purpose color and can be used for any type of model. Brown is great for military models as well as highlighting details on bright colors such as Yellow or Orange. Gray is perfect for White or Light Gray parts where Black may be too distinct.
Note:
Plastic parts may become brittle when using Tamiya Panel Line accent colors. Avoid using on movable parts and take care when applying to load-bearing areas. Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying it onto the model. Take care when applying on flat base coat colors as Accent Color paints may permeate more readily.
HO RTR 65Ft 6inch Mill Gondola - MKT #43720
MODEL FEATURES:
Working drop ends. Gently lift up & push inward to fold ends down.
Separately applied wire grab irons
Interior detailing
Decorated models fully-assembled and ready to run out of the box
Machined metal wheels and RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Minimum radius: 18inch
Brass Strip - 12inch x 1/2inch x .016inch
Length: 12inch
Width: 1/2inch
Thickness:0.016inch
Peco PLS-135 Stationary Decoder
Peco Products PLS-135 SmartSwitch Stationary Decoder for use with PLS-100 for DCC control
The Peco-PLS 135 SmartSwitch Stationary Decoder can be operated by a DCC controller, and uses the constant DCC voltage in the rails as its power supply. The decoder is also easy to program, and is compatible with most makes of DCC control systems.
HO 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - GE Rail Services Corporation/ITLX #30271
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Prototypes in service from late 1980s to the present
- Separately molded and applied hopper gates
- Correct 36 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
UPS Delivery Van
Expand UPS(R) service anywhere along your contemporary HO layout with this SceneMaster Delivery Van! Highly detailed and perfect for layout or collection, its based on the smaller vehicles used by United Parcel Service all across North America. The model comes finished in the correct UPS brown with gold lettering and logos, and includes modeler-applied side mirrors for added realism.
Includes modeler-applied mirrors, not shown.
Microscale 87948 - HO Canadian National - GP7 and GP9 Hood Diesels (1953-1961)
G (1:24) ABS 2Ft-6In STAIR (1pc)
Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision injection molded in Gray ABS Plastic. Ideal for all outdoor or profess model construction where model life is critical.
SCALE
G
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
17/32In
HEIGHT IN MM
13.5mm
WIDTH IN INCHES
1-7/16In
WIDTH IN MM
36.5mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
1/2In
LENGTH IN MM
300mm
.040in Opaque White Polystyrene Corrugated Siding (1 Sheet)
.040in (1.0mm) THICK X .040in (1.0mm) GROOVE SPACING, .013in (.33mm) RIB WIDTH
6in x 12in SHEET
HO International 7600 3-Axle Hvy-Duty Dump Truck - Assembled - Yellow Cab/Silver Body
Product Information
This Walthers SceneMaster International 7600 3-Axle Heavy-Duty Dump Truck is typical of todays heavy trucks operated by railroads, gas, water and power utilities, as well as city, county and state highway departments.
Also known as the WorkStar, this series of technologically sophisticated, heavy-duty trucks is powered by an 11-liter (390 horsepower) or 13-liter (475 horsepower) diesel engine, and can be built on a single- or dual-axle platform. The combination of power and versatility make it a favorite with railroad, construction, mining and utility companies.
This detailed HO scale model of the International 7600 3-Axle Heavy-Duty Dump Truck will look right at home in construction scenes on your modern-era layout.
Licensed replica of popular International truck
Must-have for HO model railroads
Perfect size for collectors
Fully assembled and painted
Die cast metal and plastic parts
INTERNATIONAL(R) and other International Truck trademarks are licensed by International Truck Intellectual Property Company, LLC.
HO RTR 40Ft Single-Door Steel Boxcar - Delaware & Hudson (Bridge Line Logo) #19685
(yellow, blue)
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. Check out the entire line of Bowser HO Scale ready-to-run boxcars.
Yellow
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Positionable Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
0.010 inch Thick Brass Flat Sheet - 6x12inch
Brass Flat Sheet 6inch Wide x 12inch Long (1 pc)
15.2 x 30cm
HO 53ft GSC Bulkhead Flatcar - Northern Pacific #67149
FEATURES:
- One-time run of these car numbers, limited quantity available, order now!
- Now with die cast metal body for excellent performance empty or loaded
- Limited-edition - one-time run of these car numbers!
- Prototypes in service from 1950s to early 2000s - some in work train service today
- Used to carry lumber, utility poles, pipe, steel shapes, rail and various building materials
- Fully assembled with finely detailed body, deck and bulkheads
- Correct 33 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
N Scale 2-50Ft Boxcars & 51Ft Mechanical Reefer - Foam Nest - Toys for Tots (2 Camo, 1 Blue/Black)
Product Information
Micro Trains pledged 10percent of all proceeds will be donated to the Toys for Tots Foundation
Operation Toy Train operates a special annual collection train. Each year, the train collects over 25,000 donated toys for the U.S. Marine Corps Reserve Toys for Tots Foundation, whose primary goal is, through the gift of a new toy, help bring the joy of Christmas and send a message of hope to Americas less fortunate children. www.OperationToyTrain.org www.ToysForTots.org
Plaques require modeler installation.
-packaged in foam family nest
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Pennsylvania Rack, Trailer Train Flatcar (TTBX) #930028
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO RTR Thrall 5-Unit Rebuilt 40Ft Well Car - Trailer-Train DTTX #740366 A-E
(yellow, Large Black & White Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft on both single and five-unit cars. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers - limited quantiuty, order now!
100- and 70-ton roller bearing trucks
Correct 36inch and 33inch RP-25 turned metal wheelsets
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
Proto MAX(TM) metal knuckle couplers
Talus - Coarse Buff (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings, and/or road cuts. Intermix grades and blend shades for the most realism. Color natural talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle talus and secure with scenic cement (#191).
Particle size - Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
GMD SD40-2f - DCC Ready - CP Rail (Round Porthole, White Stripe) #9002
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
HO NSC Ballast Hopper - CP Rail #457030
1984+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO 36Inch Diameter Ribbed Back Passenger Wheelsets (12 sets)
Ribbed wheelsets are most commonly found on steam era rolling stock. Kadee(R) wheel sets are manufactured to the most exacting standards.
Features
- 12 Sets per Package
- Code 110
- Accurate Markings
- Incredible Detail True to Prototype
- Non-magnetic Metal Wheels
- Smooth Tracking Free Rolling Contoured Insulated Axles - RP-25 Free Rolling Wheels
- Needlepoint Axles
HO EMD MP15AC Diesel - DCC & Sound - Southern Pacific #2734
SP FEATURES:
Ground lights
Nathan P3 horn
Hood-mounted bell
Large fuel tank
SP style cab number boards
Full SP light package on both ends
Looking for heavier road switching power, SP turned to EMD in 1975 for 58 MP15ACs to add to their roster. A small batch, #2732-2735 were used as slug mothers mated to a rebuilt EMD switcher slug for use in Roseville, California. Many of them were absorbed into the UP at the merger. After their tenure on the UP came to a close, quite a few found service on lease fleets and short lines still seen operating today.
MP15AC LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Lift rings
Windshield wipers
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Operating ditch lights (if equipped)
Operating ground lights
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and -printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Lightweight Coach -VIA Rail Canada #5647
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - DEAX #11312
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO SD60M Tri-Clops - DCC Ready - Canadian Pacific #6262
Detailed Information
CP FEATURES:
Full CP repaints (ex-SOO)
Front and rear illuminated number boards
Front and rear ditch lights
Winterization hatch
Fresh repainted appearance
By the 2000s, the 5 SOO SD60Ms slowly started to receive full CP repaints. They retained their rear number boards, but also gained rear ditch lights. Being a rarity, they have become a CP railfan favorite to catch and photograph.
ROAD NUMBER SPECIFIC FEATURES:
#6259
Ex-SOO #6059
large front plow
firecracker antenna
high nose door window
#6262
Ex-SOO #6062
large front plow
firecracker antenna
low nose door window
roof beacon (effect in DCC)
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
EMD HTC trucks with animated bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Accurately painted and printed paint schemes
Packaging securely holds for the model for safe storage
Minimum radius: 18inch Recommended radius 22inch
Trinity 3-Bay Hopper - AMDX, pkg(3) #1
ETA: October 2021
Detailed Information
MODEL FEATURES:
Two body styles represent 10-panel and 12-panel variations
New body styles N including BNSF with stiffeners
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Coupler cutbar and Air hose on each end
Separately applied end cages and etched end platforms
Photo-etched metal roofwalk
Weighted for trouble free operation
Machined metal wheels
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Standard size coupler draft gear box with screw mounted lid
Fully assembled and ready for your layout
Replacement parts available
Minimum radius: 18inch
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
PROTOTYPE AND BACKGROUND INFO:
Trinity Steel was founded by C. J. Bender in Dallas in 1933. The company didnt enter into the railroad freight car market until 1984, when Trinity acquired the railcar designs and production facilities of the Pullman-Standard Car Manufacturing Company, once the largest railcar manufacturer in North America. That same year Trinity also acquired the railcar designs of General American Transportation Corporation. In 1986 the rail car designs and production facilities of Greenville Steel Car Company were purchased, including the auto rack designs of Portec-Paragon. Also acquired in 1986 were the railcar designs of North American Car Corporation, and in 1987 Ortner Freight Car was acquired.
With this collective experience across several facilities, Trinity developed many new designs that became ubiquitous to present day railroading. One of their most famous designs is the 3-bay 5161cuft covered hopper. This covered hopper is optimized to transport agricultural products, sugar, dry chemicals, or other similar products and can be seen in unit train assignments all over North America. Introduced around 1995, these cars are extremely common today and owned by many Class 1 and short line railroads alike.
RS-18u, DCC & Sound - New Brunswick East Coast (Patch) #1816
Era:1998-2008
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
HO Alphabets - Block Gothic - White - Waterslide Decals
Description: (formerly 87-123-1) Alphabets - Block Gothic - White - Waterslide Decal
HO Water Sports People w/ Equipment (6 pkg)
Details Water athlete
Theres Something for Everyone in Water Sports!
The NOCH Mini Figures -Water Sports Enthusiasts- are perfect for installing on a model landscapes existing water scene. Besides surfers, boat drivers, anglers, kite surfers and sailors, on a hot summer day the water has plenty to offer and -Water Sports Enthusiasts -should not be missing! They really animate the water landscape and cater for high spirits far out on the water. With the realistic NOCH Water Effects for designing waters, the water on which the -Water Sports Enthusiasts- are active looks even more realistic.
Intermountain HO Scale ACF Center Flow Hopper Western Maryland #604951
PRR X31A Single-Door Boxcar: Circle Keystone - Single Car #70248
Detail Variations:
Built 1934-35, as operated to approx. 1954.
6-pack includes the following numbers:
#67758
#68074
#69347
#70002
#70183
#70248
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
Add-On Wall Section - Blue - For Most Kits - 20 Scale Feet Long
Molded in blue and white, use these parts to extend the length of most Pikestuff Kits. Wall sections measure 20 scale feet wide (2-3/4in). Includes two wall and roof sections, plus concrete foundation and glue strips.
Leaf Flakes - Shaker 16oz - Eucalyptus
Peco PLS 130 SmartFrog V6
SMARTFROG
The Smartswitch(TM) system can be used to operate turnouts, semaphore signals, level crossing gates and barriers and other moving features. This Smartfrog unit facilitates changing frog polarity when using the Smartswitch system to operate turnouts. Watch the videos to see the potential uses and ease of installation of this system and see our Shows You How booklet No. 24 Operating Points and Signals.
Recommended to be used with:
Suitable for all scales and gauges up to and including Gauge 0
Loudspeaker 23mm .930inch round 4 Ohms with sound chamber
AK Interactive Wash : Track wash
Plant No. 4 (Front Wall) 6 x 2-1/4 x 7-1/2 inches 15 x 5.6 x 18.7cm
A Great Transition between your Layout Scenery and Background Scenes
Finally! There is a quick, affordable way to add scenery anywhere space is limited - without the added time and trouble of kitbashing!
Background Building Walls let you use that last little bit of space to create a realistic background for any industrial area. These HO Scale kits can be used on the edge of your benchwork, along a shelf or modular layout and in dioramas. Once installed, they provide a smooth, realistic transition between 3-D foreground scenes and printed or painted backgrounds. (Check out Walthers Instant Horizons printed backgrounds for more ideas on creating a backdrop for your layout.)
Based on popular Cornerstone Series(R) structures, you can build them stock or easily customize them. Each has scribed cut lines molded on the inside so you can cut new angles or reduce the width to fit your pike. Each building also comes with a variety of add-on details, a partial roof and colorful sign decals
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200074
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
HO scale Picket Fence - Kit
Easy-to-assemble HO Scale Fences from Woodland Scenics feature modular design and include gates, detailed hinges and planter pins for easy installation. Each fence kit includes parts to build 192 scale feet of fencing. Fences for all kinds of scenes are available as part of the line of Woodland Scenics N Scale scenery details.
N Scale AAR 40ft Steel Boxcar - Ready to Run Silver Series - Wabash
Product Information
This Bachmann Silver Series AAR 40ft Steel Boxcar is based on cars used for moving all kinds of freight that needed protection from theft and weather. These durable 40ft steel boxcars were once a common sight on railroads large and small. features a detailed injection-molded body with applied roofwalk, realistic decoration, metal wheels and E-Z Mate magnetic knuckle couplers.
International(R) 4300 2-Axle Truck with Tree Trimmer Body - Assembled -- Orange cab and body, yellow boom
HO Bethlehem 3350 CuFt Quad Coal Hopper - SBD/CSXT (Black Repaint 1987+) #345926
Repaint Date: 6-87
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36 Inch Wheels
SBD/CSXT Black Repaint 1987+ takes us back to early days of the CSX. In 1987, the ex-L&N South Louisville Car Shops were still in full swing, repainting cars. These repaints featured SBD reporting marks and the now-familiar CSX logo on the hopper car sides. This group of CSX repaints is pulled from ex-L&N Bethlehem cars built in 1976. The models feature an accurate body for this ex-L&N series, including rounded top chord corner caps, paired lower posts at the side bolsters, and tiny accurate triangle supports on the bottom chord near the bolster posts. The B-end of the model features an accurate Universal 7400 high handbrake, modern brake wheel and Morton-style brake step. Inside, the models have a gorgeous (and removable!) flood-style coal load. These coal cars roll on Tangent 100-ton Barber S-2 trucks with separate truck brake beams and rotating Timken caps. The CSX lettering on the cars is carefully replicated, and includes varying CAPY data, South Louisville paint codes and COTS data across the different car numbers. Its time to haul coal!!
Code 88 RP25 Non-Magnetic Metal Freight Car Wheelsets - 33inch Smooth Back pkg(12 Axles)
RS-18u, DCC & Sound - Trillium Railway #1842 Otter Valley Railroad Exclusive Run
Run Conditional on meeting orders, please pre-order if you want this model!!
Era:2009-Present
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
Plastruct 90203 ABS 1/4 Square Tube (5pcs pkg)
Specifications :
Height: 1/4 (6.4mm)
Width: 1/4 (6.4mm)
Inner Diameter: 1/8 (3.2mm)
Wall: 1/16 (1.6mm)
Length: 15
HO H-6-G - DC/Silent - Canadian National Railway (Straight Wafer) #1532
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
Chicago & North Western #39641
Built: BLT 2-69 RBLT 7-84
Metal wheel sets , Kadee #5 installed
Gunderson Multi-Max Auto Rack - CP SOO
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
N Scale 70s GMC Holmes Wrecker (Long Hood)
Award Winning Truck - This vehicle won the award for best vehicle kit of the year, presented to ShowCase Miniatures at the National N Scale Convention 2017 by the N Scale Vehicle Association. Decals and vacu-formed windshield included
Drive Mechanism w/Cable & Actuator
Mounting bracket and mechanism utilize the Tortoise(tm) (not included) and a special drive wire cable assembly to remotely actuate any crossing gate, train order or semaphore signal having a vertical control wire extending below the layout. Positive, adjustable stops are provided at both ends of travel. Can drive two cables from the one drive mechanism, if desired. Adjustable for all scales.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16000
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 70 Ton 13 Panel 3-Bay Hopper Car - Pennsylvania (H37B w/ Crown Trucks) #272250
Ready to Run.
Features:
Crisp details and sharp painting and printing,
metal wheels and knuckle couplers
1st time offered with the correct Trucks
HO Scale Ground Mast Assembly
This mast and ladder assembly can be used with your choice of our signal head kits to create many different RR signal configurations. The etched fret contains optional parts for creating unique signal builds.
HO Bathtub Coal Gondola - DREX (ex-CP) #1015
Built: 5-05
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
Van Hobbies - HO Brass CNR C-630 - DC/Nonsound - Unpainted - Estate Brass Locomotive
Display picture is accurate to the item being sold.
Pre-owned, but in great condition!
Comes in the original Box!
This brass unit has been left unpainted- fuel tank included in the box.
Please note that this item is final sale.
No refunds or exchanges.
HO EMD FT A+B Set - DC/Silent - Northern Pacific (NP Pine Tree Scheme) #5409D + 5409C
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO EMD SD7 - DCC & Sound - Southern Pacific (Black Widow) #5329
Southern Pacific
- Steam generator equipment details on short hood
- Correct Mars style -ash can- light on both ends of the locomotive
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO Fire Department Headquarters - Kit
Product Information
The Walthers Cornerstone HO Scale Fire Department Headquarters is a typical mid-20th Century main facility thats at home in the city. Featuring realistic brickwork, concrete Art Deco features and metal-frame windows, this detailed fire station structure kit makes it easy to model a larger firehouse on your steam or diesel-era layout. It can accommodate most large fire apparatus in its three drive-through bays and two smaller rigs in both garage bays. The Fire Department Headquarters is part of a selection of Cornerstone and SceneMaster HO Scale fire safety structures and vehicles.
Two-story brick Art Deco headquarters building
Brick and concrete construction
Four equipment bays with three through and two single-ended stalls
Fits most large, modern fire equipment models
Includes realistic printed signs
Easy-to-build plastic kit
Molded in three colors plus clear glazing
The finished Fire Department Headquarters model measures: 9-1/8 x 11-13/16 x 5-5/8inch (23.5 x 30 x 14.3cm)
HO GP9 DCC Ready - Toronto, Hamilton, & Buffalo #401
ERA: Early 1960-1970s
THB FEATURES:
-Steam Generator Intake & Exhaust
-Long hood nose mounted bell
-Separate ACI plates included
-Roof mounted air tanks
TH&Bs 3 steam generator equipped GP9s began service in 1954 and effectively vanquished steam on this small Canadian railroad. Their time in passenger service was relatively short and they served out their time in freight service all the way into the CP Rail era.
LOCOMOTIVE FEATURES:
-Trainline and MU hoses
-Coupler cut levers
-Drop steps unless noted
-MU stands
-Nub style walkway tread
-Bell placement & type per prototype
-Fine-scale handrails for scale appearance
-Wire grab irons
-Lift rings
-Windshield wipers
-See-through cab windows and full cab interior
-Etched metal radiator intake grilles and fan grilles
-Air tanks mounted below sill unless noted
-Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
-Blomberg-B trucks with appropriate bearing caps
-Sander lines
-Speed recorder unless noted
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately-painted and printed paint schemes
-Body-mounted McHenry operating scale knuckle couplers
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
-All-wheel drive with precision gears for smooth and quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-Bidirectional constant LED lighting so headlight brightness remains constant
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds the model for safe storage
-Replacement parts available
-Minimum radius: 18in
SOUND EQUPPED MODELS ALSO FEATURE
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
HO 4650 Centerflow Hopper - Union Pacific (Ex-SP Patch) #496490
Features:
Etched metal roof walks
Detailed brake gear
Blackened metal wheels
Accurate painting and printing
100-ton roller-bearing trucks and body mounted AccuMate couplers with screw-attached coupler pockets.
AccuMate couplers are made under license from AccuRail, Inc.
PSC Transfer Van - Canadian National #76554
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
N Scale Code 55 Large Radius - Curved Turnouts w/ Electrofrog - Right Hand
Product Information
PECO Streamline N Gauge Code 55 - Universal Fine trackage system
Despite a low visible rail height of just 1.4mm, all brands of N Gauge model locomotives will run on this track.
The ingenious rail section of PECO 55 combines strength and durability with a highly realistic appearance and uses the same universal rail joiners as Code 80; the geometry of this range has been cleverly designed to make it easy to build convenient, complex and aesthetically pleasing formations. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.
Technical Specification:
Length: 160mm
Frog Angle: 10 Degrees
Radius: 457 x 914mm
HO NSC Ballast Hopper - CP Rail (Branchline) #456077
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
6mm Static Grass - Wild Meadow Grass (20g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
HO Scale G2 AC4400CW - DCC Ready - Union Pacific #6193
Detailed Information
UP FEATURES:
Primed for Grime
GPS pod
Replaced AC unit in UP yellow
Regular spare knuckle holder on rear pilot
The Union Pacific acquisition of the Southern Pacific in 1996 saw the transfer of SP newly acquired AC4400CWs to a new railroad. As they were essentially brand new, there was no push to repaint these units and they existed for several years without modification. Eventually the AC4400CWs were renumbered with simple patches over the SP paint, but as this was done on a unit-by-unit basis where they were, the patches all had a measure of uniqueness.
ROAD NUMBER SPECIFIC FEATURES:
#6193
Formerly SP 138; Wears two UP shields on the nose (sometimes referred to as cheek shields), UP shield on rear patched in yellow reporting marks in grey faded grey and red to represent the significant sun-bleaching these units received.
#6289
Formerly SP 289; Infamous -Flaming Patch-Job- unit with a distinctive stylized flames on rear of locomotive, Single UP shield over faded SP logo on front yellow sill stripe modern PTC Antenna boxes.
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO PTC Antenna for GE Locomotives
Russell Snowplow - Ready to Run - Great Northern #X-1520 (Big Sky Blue)
Product Information
Take on winters worst with a WalthersProto Russell Snowplow on the job! In service since the 1920s, all-steel plows like this are a must have for railroads big and small, and look great spotted on a siding or near the engine shed during the warmer months too! Completely retooled and superbly detailed, each HO Scale model features:
Limited edition - one time run of these roadnumbers!
Prototypes in service 1920s to present
Fully-assembled, railroad ready - undecorated kit also available
Factory-installed grab irons
Complete underbody w/brake gear & piping
Custom front truck for tighter curves
Detailed flanger
Thin profile stirrups
Window -glass-
Ultra-Smooth rolling metal axles and 33inch wheelsets
Proto MAX(TM) metal knuckle coupler on rear of plow
Railroad-Specific Details:
See-through -steel- or original -wood- running boards
Sturdy hinged & positionable side wings in two styles w/wire cross braces
Fitted w/original or one of three styles of late headlights as appropriate
Bettendorf or roller bearing rear truck
HO RTR 33,900 Gallon LPG Tank/ Late - PROX #31884
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Three different body phases: early, flat panel, and late
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports and tank saddles
Photo etched metal walkways and end platforms
Wire safety rails and end handrails
Printed placards
Full underframe detail featuring body mounted brakes or truck mounted brakes as per prototype
Body-mounted, McHenry scale double-shelf knuckle couplers
100 ton trucks with animated rotating bearing caps
Machined metal wheels with RP25 contours
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Weighted for optimum performance
Minimum radius: 18inch — Recommended radius: 22inch
HO G2 SD80MAC - DCC & Sound - Conrail #4129
Detailed Information
CR FEATURES:
As-delivered paint scheme
Front and rear operating red marker lights
Leslie 3-chime horn
Small EMD front plow
Pilot mounted front ditch lights
In 1995, Conrail placed an order for 30 SD80MACs, being the sole original purchaser. They were painted like the then-recently delivered SD70MACs. This would end up being the last new locomotive order CR would place before they were split up between CSX and NS in 1999.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
CV chart included in the box
Black - Lumber Delivery Body Unassembled Kit
Canadian Pacific Power In Color, Volume 3: Covered Wagons - by Stephen M. Timko
RELEASED: October 1, 2022
AUTHOR: Stephen M. Timko
128 Pages, All Color
The midpoint of Canadian Pacific (and CP Rails) locomotive fleet, featuring covered wagons, constructed by GMD, Alco, MLW, and CLC, illustrated with over 335 photos of both A and B units used in both passenger and freight service. The three rare EMD E-8s, the only ones owned by a Canadian railroad, are featured along CLCs FM-Designed CPA/CPB16-4 and CFA-CFB16-4 units. The Royal Canadian Pacific F-unit are included as well.
OVR Exclusive - HO Bi-Level Auto Rack - CP Rail/TTGX #963800
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO RTR 60Ft Flatcar - Delaware & Hudson D&H #16144
MODEL FEATURES:
Working drop ends. Gently lift up & push inward to fold ends down.
Separately applied wire grab irons
Interior detailing
Decorated models fully-assembled and ready to run out of the box
Machined metal wheels and RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Minimum radius: 18inch
HO ICC B&O I-18 Steel Bay Window Caboose - Baltimore & Ohio (Original Blue 1965) #C-3034
Product: ICC B&O I-18 Steel Bay Window Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Gould Caboose Roller Bearing with separate brake beam part
Wheels: CNC-Machined 33inch Wheels
DC/DCC Lighting Features: Interior lights (Dim!), Scale-size Pyle lanterns
Baltimore & Ohio (B&O) -Original Blue 1965 Screens- replicates the as-delivered International Car Company paint scheme paired with the early version of the bay window screens application. All 46 I-18 cabooses originally wore this classic B&O Royal Blue with bold yellow ends and unpainted silver roof. ICC applied safety screens to the side widows and individual stand off frames to protect the angled bay windows. B&O crews quickly removed the single main screen on the bay window. This is where we start with our model. All of the original 1965 classic white B&O graphics are present, even down to the tiny slack adjuster badge. The air reservoir, ICC paint job and wheel lubrication date stencils are accurate down to the day and month for each individual caboose number. The trust stencil data is or is not applied, based on the individual numbers. Fun fact: The first 26 I-18 cabooses were financed by the B&O through National Commercial bank, while the remaining 20 were purchased directly by the B&O. The fully-painted, two-tone green interior is illuminated with (dim!) lights and the scale-size Pyle lanterns are lit as well. A final detail worth mentioning: Those classic B&O red reflectors on the end railings have been faithfully duplicated with 4 individual red lenses.
HO GMD SD40-2 - DCC & Sound - CP Rail: No Multimark #5671
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Delivery Van - FedEx
Expected Delivery: March 2020
At the curb or on the job, add color and variety to your HO vehicle fleet with SceneMaster Service and Delivery Vans!
Based on contemporary designs used by all kinds of businesses big and small, youll also find them in the ranks of the fire and rescue service.
Factory painted and printed in full color, the finished models look great on layouts and in collections.
Highly detailed, perfect for layout or collection
Each also includes modeler-applied side mirrors for more realism.
HO RTR 53Ft Rivet Side RoadRailer Trailer - Norfolk Southern (Triple Crown) #460003
Rivet Side Large Triple Crown Norfolk Sou.
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
Special
