N Scale GP-9 w/Turbo Tubes - Silver Standard DC - Grand Trunk GT #4921
Features:
Powered low friction drive
Blackened metal wheels
Dual brass flywheels
Directional lighting
Golden-white LEDs
AccuMate couplers
Atlas Master Series Silver Additional Features:
Atlas Silver Sound Ready models are equipped with a speaker for easy conversion to sound with the addition of a decoder.
AccuMate couplers are made under license from AccuRail, Inc
Bi-Level Auto Racks - Canadian National - White w/Red Logo #9279
All are Ready-to-Run.
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene-
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage.
Plastruct 91001 ABS .010 Grey Sheet (5pcs pkg)
Specifications In Inches :
Thickness: .010 (0.3 mm)
Width: 7 (175mm)
Length: 12 (300mm)
HO 66ft Bulkhead Flatcar - Undecorated (Early Version)
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
HO Railroad Roman - Letters & Numbers (White) 22inch-24inch - Waterslide Decals
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0018
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SECX #2312
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Air Hose - Locomotive w/Extension and Angle Cock - pkg(2)
HO Scale - 1947 Packard Clipper Two Door Car - Unpainted and Resin Cast Kit
United Parcel Service UPS Package Truck (Car) - Modern Shield Logo
Die Cast
Now its easy to add UPS(R) service to your HO layout with this exciting series of officially licensed replicas from Walthers that includes Cornerstone structure kits, SceneMaster vehicles and figures!
Based on the P-600 that is been a fixture of the delivery fleet since 1965, these purpose-built vehicles offer 600 cubic feet of cargo space and are still going strong today! The models come fully assembled, finished in the correct UPS Brown and lettered in gold with authentic logos.
HO Scale - 1947 Packard Clipper Four Door Taxi - Unpainted and Resin Cast Kit
HO Construction Workers pkg(6) - Set #1
Bring new life to your layout with ready-to-use Walthers SceneMaster figure sets!
Each figure is carefully sculpted with realistic detail and hand-painted.
HO Budd Slumbercoach - Amtrak (Phase 3) #2081 Loch Long
All new from the ground up, the Rapido Slumbercoach features:
Designed from original blueprints
Full Rapido level of underbody detail including separate pipes and conduits
Full multi-color interior detail including roomette doors
Track-powered interior lighting (operable on both DC and DCC)
Accurate GSC 41-NDO-11 trucks with disc brake detail
Etched-metal end gates
Sprung diaphragms
Rapidos renowned stainless-steel finish
HO Scale - 1951-55 White Freightliner Long WB Tandem Day Cab Tractor - Unpainted and Resin Cast Kit
HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4565
8inch stripe w/out water expansion tank, w/ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
Short Crossing Insulfrog SL-93
Approximate length: 5inch (127mm); angle: 24 degrees.
Black Ties
Shipped from Ontario Canada
HO 40Ft Refrigerated Container - CSAV Set #2 (3 pkg)
Road Numbers: CRLU 7253341, CRLU 7253399, CRLU 7253450
(White/Blue/Red)
MASTER MODEL FEATURES:
40-foot High-Cube Refrigerated Container
Composite materials sandwich-sides design
Detailed picture window refrigeration unit with separate parts
ISO Type 45R1
Five hinge / four bar doors with OUT style handles
Each set comes as a 3-pack
Woodland Scenics Figures HO Goodbye People
3/8 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 3/8 inch
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504986
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
HO 53ft Railgon Gondola - Railgon/GONX #310570
(as-built; black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
HO RTR 52Ft Mill Gondola - Rock Island #680132
Detailed Information
MODEL FEATURES:
Body-mounted McHenry operating scale knuckle couplers
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Razor sharp painting and printing
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
N Scenic Accent Figures - Painters (12pcs)
A set of men in white painters overalls. Includes scaffolding, two drums of paint and three smaller cans of paint.
HO Hydraulic Excavator - Orange
HO Kansas City-Style Post-War PCC Streetcar - Standard DC - SEPTA (Ex-Toronto) #2245
Maroon/Cream
Sign: 60 35 Allegheny
Wise Tobacco CO.
Woodland Scenics HO Scale Just Plug Lighted Billboards are an easy way to add lighting effects to your layout. Whether along a rural highway, on city rooftops or on busy streets they add flair to any scene. Used as signs for advertising local shops and destinations, they are staples across North America. Designed to work with the Just Plug Lighting System.
Each Just Plug Lighted Billboard includes factory-installed LED lighting drawing just 20mA.
-Warm white LEDs
-Easy installation
HO 89ft Thrall Bi-Level Auto Carrier - UP/TTGX #153252
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
HO EMD FT A+B Set - DC/DCC/Sound - Lackawanna (Grey & Maroon) #651A + 651B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO Code 83 Nickel Silver DCC Friendly # 4 Turnout - Left Hand
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 83 rail!
Combining great looks and great performance in a complete system, each item comes fully assembled and features:
-Thin profile ties in realistic dark brown with enhanced wood grain detail
-Fine profile molded spike and tie plate details on each tie
-Spike-mounting holes positioned next to the rail
-Molded starter points on underside of ties for fasteners
-Custom formulated nickel silver rail for outstanding electrical conductivity
In addition to these details, each DCC-friendly Code 83 Turnout features:
-Snap-action points
-Solid rail points for better conductivity
-Isolated frogs with built-in jumper for powering as desired
-Current jumpers entering and leaving the frogs
-Insulated tie bar
N Scale ACF 3-Bay CF Covered Hopper w/ Elongated Hatches - Archer-Daniels-Midland (4pkg)
Road numbers: #65015, 65029, 65039, 65081
HO 50ft Evans Cushion Coil Car - DT&I #1131
Designed to speed loading and unloading while protecting large steel coils in transit, the Walthers Proto(R) 50ft Evans Cushion Coil Car is a great way to add steel traffic to any HO layout. These cars feature updated tooling with removable angled, round or glass fiber hoods.
Additional features include:
- One time run of these road numbers, limited quantity available - order now!
- Based on cars in service 1970s to early 2000s
- Prototypes carry larger steel coils used to make automobiles, appliances and food packaging
- Matching, removable hoods in angled, round and glass fiber styles with lifting and stacking brackets
- Fully assembled with etched metal walkways, grab irons, underframe cushioning device, separate brake gear, and more!
- Detailed body with V-shaped load cradle and separate restraints
- Heavy die-cast metal frame for enhanced performance
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Detail your new coil cars in minutes with the Cornerstone Steel Coil Load (#933-1499), sold separately)
- Great for use with Walthers Steel and Auto Industry Series!
HO 85Ft General American G85 Flatcar - Santa Fe #290734
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
HO 40ft Corrugated LC Container - Nedlloyd #1 (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered
10Ft 6In Modified 1937 AAR Boxcar - Toledo, Peoria & Western #7009
50Ft PS 5277 Box - E&LS #101701
Detailed Information
MODEL FEATURES:
Single 10ft Pullman Standard door
Separately applied grab irons, end ladders, and brake wheel
Photo-etch coupler cross-over platform
Fully-assembled and ready to run out of the box
Painted and printed for realistic decoration
Weighted for trouble free operation
Machined metal wheels and RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of -In Service- equipment; -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per road number matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Union Pacific Rack, Trailer Train Flatcar (TTBX) #963120
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO Slab-Side Covered Hopper - Canadian Pacific #381260
8 Hatch
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
HO 5820 Covered Hopper - Procor/UNPX (No Procor Logo) #123566
Era: 1988+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO Value Line RTR - 13 Panel Coalporter - Conrail #503034
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO Locomotive Data 2010+ - Decals
This complex sheet includes 340+ different styles of data used on locomotives with a total of 2100+ total decals. Auto Start, Caution, Electrical, Fire Extinguisher, etc. labels for both EMD and GE are all included. Sheet comes with full color 11x17 fold-out sheet guide.
Railroad Tug Boat Kit - Unpainted and Resin Cast
(1/87 Scale)
This kit is perfect for any harbor or river scene. With its high pilot house, this tug typifies a railroad tug boat used for moving railroad car flats and barges. The higher pilot house allows the captain to see over a railway car float loaded with box car. With the closing of most car float operations, many of these tugs may now be seen in regular tug boat service. Kit includes etched brass stanchions. Tug measures 11in X 3.25in.
-Cast Polyurethane Resin Kit
-Easy Assembly
-Details Moulded in Place
-Accurate
-Less Trucks and Couplers
Try Sylvans Resin Prep! Helps prepare your model for painting!
Part #SSM-A001
Pedestrians - Set #1 - pkg(6)
Bring new life to your layout with ready-to-use Walthers SceneMaster figure sets. Each figure is carefully sculpted with realistic detail and hand-painted (unless noted).
Fine Red Sable Brush - Size 2
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23081
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale NSC 64 Ft 6000 Cubic Gondola HS - MWCX #102874
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO 50Ft PCF B70 Boxcar - w/ Youngstown Doors - Southern Pacific #243450
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
HO Scale - 1951-55 Tandem Axle Fruehauf 34Ft West Coast Style Dry Van - Unpainted and Resin Cast Kit
HO NSC Ballast Hopper - Herzog (Early) #6359
1977+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO GATC 4500 Covered Hopper - CRDX/ADM #4881
(ADM Blue Lease 9-1966)
- Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
- CNC-Machined 36 Inch Wheels
CRDX ADM Blue Lease 9-1966 is one of those schemes that defines the word sharp. ADM leased these cars from Chicago Freight Car Leasing Company (CRDX) and they were painted in a wonderful ADM dark blue with white graphics. These models duplicate the CRDX prototypes with Morton roof walkways and body mounted brake gear. Look closely at the bays, and you will notice the distinctive Wine Combo style outlet gates that allowed for either normal gravity unloading or low pressure air-assisted pneumatic unloading depending on the commodity. The B-end features an accurate Morton brake step and Ajax power brake. The low retainer valve is mounted near the air reservoir, just like the prototype. The black 100-ton Barber S-2 trucks have accurate rotating Timken bearing caps!
N Milton A. Corporation (Scale: 80 x 130ft) - Blue
HO Scale AMD103/P42 - DCC & Sound - Amtrak (50th Anniversary Phase 6) #108
Detailed Information
AMTRAK FEATURES:
Amtraks five commemorative 50th Anniversary P42 locomotives were created to celebrate 50 years as Americas Railroad, each with a different design. The lineup includes old favorites (Phase I and Dash 8 Phase III), a present day (Phase V) and two new designs (Midnight Blue and Phase VI). Athearn is working closely with Amtrak to authentically replicate each of these special liveries that will be operating across their system.
Collect all five!
-Concept art provided by Amtrak and
may vary from actual Locomotive
ROAD NUMBER SPECIFIC FEATURES:
#46
Bolt-on nose
PTC antenna farm
#100
Bolt-on nose
PTC antenna farm
AMD103/P42 SERIES LOCOMOTIVE FEATURES:
Officially licensed product of Amtrak (Amtrak-painted units)
3 different nose variations: Amtrak as-built, Amtrak rebuilt, and Via
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Flexible rubber MU hoses
Flexible rubber trainline hose
Scaled from prototype resources including drawings, field measurements, photographs, and more
Separately applied wire handrails
Exhaust stack
Photo etched metal radiator fan grille
Highly-detailed underframe including air tanks with air lines, air filter, and air dryer with two different types of rock shields
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting including operating ditch lights and red marker lights
Completely-redesigned die-cast frame for superior tractive effort
Packaging securely holds model for safe storage
Fully-assembled and ready-to-run
Accurately painted and printed paint schemes
Spray Can - JGSDF Olive Drab (100mL) TS-70
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO GE 44 Tonner Phase Ic Body - DC/DCC/Sound - Generic Industrial: Yellow
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
Expand container traffic on your 1960s and 70s era HO layout with this series of authentic models from - SceneMaster, featuring:
- Standard end-door and right-side door versions as appropriate
- Authentic rivet, door latch and hinge details
- Colorful period schemes
- Perfect period loads for WalthersMainline G85 and 60ft Pullman-Standard VTTX container flatcars (each sold separately)
HO USRA Single-Sheathed Boxcar: RF&P
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
N Scale Dwarf Signals (3 pkg)
This signal can be built static or operational using the micro tri-color LED. The N Scale signal head measures 0.155inch high by 0.079inch wide (thats just the head not mounted). The dwarf signal target background is used in areas where its harder to see the signal light against other lights in the immediate area.
HO Scale Ford F-100 Pickup Truck - Southern
VEHICLE MODEL FEATURES:
Side view mirrors
Headlight glazing
Interior detail
Under carriage detail
Moveable tailgate hatch
HO Union X-3 Tankcar - Procor Limited #32931
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO Pedestrians - Set #2 (6pcs)
Bring new life to your layout with ready-to-use Walthers SceneMaster figure sets. Each figure is carefully sculpted with realistic detail and hand-painted (unless noted).
HO ET44 Tier 4 GEVO - DCC & Sound - Navajo Mine Railroad #2027
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight,
-Correct scale sized front ditch lights,
-Number Boards,
-Rear headlight,
-Front & Rear Walkway Lights,
-Correct scale sized rear ditch lights (road name specific),
-Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks,
-Accurate GE style traction motor detail on 3rd and 4th axles,
-Wheel flange lubricator detail,
-Accurate dark cab side window tint,
-See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations),
-Real brake chain,
- Real tow chain (road name specific),
-Separate underframe piping detail,
-LSL lights (CSX & NS),
-Etched metal walkway steps (road name specific),
-Accurate PTC Antenna Arrays on cab roof (road name and number specific),
-Accurate Nathan Airchime K5HL Horn,
-Road name specific front/rear handrails,
-Formed wire nose to walkway handrail,
-Rear rock pilot on CN units,
-See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released after February 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released after February 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
The third release features units of mixed types of exhaust hatches. The CN-Veterans #3015, CN-EJ&E, and CN-Illinois Central have square exhaust. All others in the third release have angled exhaust.
As more railroads purchase these and take delivery, we will make subsequent product announcements.
-All are Ready-to-Run. Some details may be included for installation by the modeler.
29 FT Water/Oil tank peaked top kit
60 foot tall by 24 foot in diameter riveted steel tank with peaked top.
The Rix Water and Oil Tank is designed to represent riveted steel tanks which the railroads started building back in 1880 during the steam era. Today tanks similar to these are being used to hold oil and chemicals. The Rix Water and Oil Tank is made up of 6 band segments which form a complete band. The bands are then stacked one on top of another until they reach the given height. Kits include enough band segment to produce either a 29, 43 or 60 foot tall by 24 foot diameter tank. All tanks are molded in a black polystyrene.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - IWXX (Hunter Green) #220014
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 59Ft Cylindrical Hopper - Toronto, Hamilton & Buffalo #1538
(black, white; Bow Tie Logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
One time run of these roadnumbers, order now - limited quantity available
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO MLW M420 MR20c - DC/DCC Ready - Canadian National (Stripes) #3572
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO Argosy Booksellers - Kit
Product Information
Argosy Booksellers is part of the selection of Walthers Cornerstone brick storefront building kits patterned after those you will find in towns across the continent. Back in the day the family would all pile into the back of Dads old pick-up and rattle into town. There was something special about those old buildings. All of those fancy details and trim left an impression, even on the kids. There was always a stop at the hardware store. Mom could spend all day at Smiths, where they had nice clothes. Kids would dream about the toys at the dime store. And the folks never could say no when they begged for ice cream! Main Street hasnt changed much over the years and stores like Argosy Booksellers are built to last.
Buildings tell a lot about your layout, especially in a business district with colorful signs that set the time and place. Modeling this important feature is easy with Argosy Booksellers because it combines a business on the first floor and apartments of offices on the second and third floors - typical of buildings constructed in the late 1800s through the 1930s and still in use today. Personalize your model with paint from your dealer, and add the finishing touch with the colorful signs in the kit.
The finished kit measures: 4-3/4 x 8-1/2 x 7-1/4inch (12 x 21.5 x 18cm)
Three story brick corner structure
Fits 1880s to present
Perfect for small town or big city
Use with other Cornerstone storefronts to create a business district
Works with Cornerstone Street System
Colorful printed signs
HO RTR Locomotive Wheel Assembly - 40inch (6pkg)
N Scale Pullman-Standard 5277 Cubic Foot Boxcar - Canadian National - #419142
Date: LRC 10-93
PSC Transfer Van - Canadian National #76665
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
Talus - Extra Coarse Buff (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings, and/or road cuts. Intermix grades and blend shades for the most realism. Color natural talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle talus and secure with scenic cement (#191).
Particle size - Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
HO Value Line RTR - 13 Panel Coalporter - NYC (Conrail Quality) #505193
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52R class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO GMD SD40-2 - DCC & Sound - ICE ex/CP (City of Algona) #6216
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars,
operating headlight, window glass, road name specific details, roadname specific fuel tanks,
can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC,
DCC with Sound version features LokSound Select decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - MRRX (6 pkg) #14
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
4806
4814
4819
4850
4864
4879
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO EMD GP15T Diesel - DCC & Sound - CSX #1504
ETA: July 2023
Detailed Information
CSX FEATURES:
Unique art per road number
Ditch lights on both ends
Timken roller bearings
5-chiime horn
Expert approved artwork and colors
By the mid 1990s, CSX started to adapt yellow ends and frame stripes to some of their diesels to be more visible at grade crossings and help prevent collisions. This was a simple way of updating the paint scheme without a full repaint. Both the black frame (Blue Stripe) and blue frame (Blue Down) examples are represented in this run for some variety to your fleet. Each road number offered has different art details between them.
ROAD NUMBER SPECIFIC FEATURES:
#1504
-Blue stripe- repaint with yellow ends and frame stripe
C&O sub lettering
whip antenna
large front plow
unique number board font
#1513
-Blue stripe- repaint with yellow ends and frame stripe
CSXT sub lettering
whip antenna
large front plow
crooked CSX lettering on right side
#1518
-Blue down- repaint with yellow ends and frame stripe
CSXT sub lettering
whip antenna
Chessie front rock plow
GP15 SERIES LOCOMOTIVE FEATURES:
Operating Class Lights (DCC only)
Operating Number boards
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
High Self Adhesive Wild Meadow Grass Tuft Strips - 4mm (10 strips)
10 4mm high self adhesive Wild Meadow Grass tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.
Plastruct 91005 Gray ABS 0.060 (2pcs pkg)
Specifications In Inches:
Thickness: .060 (1.5mm)
Width: 7 (175mm)
Length: 12 (300mm)
N Scale Locomotive Coupler Conversion Kits - Con-Cor PA-1 Powered
Description
N Scale Package includes one front and one rear coupler. This conversion fits: Con-Cor: PA-1 diesel.
HO Vancouver Iron Works Piggyback Flatcar - Canadian National #688034
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286320
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.156 (9pcs pkg)
HO EMD SW9 - DC/ Silent - New York Central (NYC As Delivered) #8930
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
4785 PS2-CD Covered Hopper - Early End Frame - Conrail - Red Large Logo #886835
HO 100-Ton Open Hopper - Penn Central #480603
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
Rock Molds - Rock Face
Highly detailed, flexible and durable rock molds can be used to cast small boulders, rock outcroppings, top rocks for fields and creeks, or make entire rock faces by combining castings produced with these molds.
HO 53Ft Gunderson Husky-Stack Well Car & Containers - TTX (Patched Logo) #646851
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
ProtoThrottle - Gold - OVR EXCLUSIVE!!
LIMITED EDITION!!
This gorgeous gold color was produced specifically for Otter Valley Railroad!
Get yours while quantities last!
The ProtoThrottle Realistic Control Stand Throttle mimics a standard EMD control stand including full detent throttle and reverser handles, a spring-loaded horn handle, a push-on/push-off bell button, and fully programmable front and rear headlights with a setting for ditch lights. In addition, the ProtoThrottle comes with a robust faceplate machined from aluminum, including prototype bezels, and anodized to give the look and feel of a real control stand.
FEATURES:
- Fully wireless throttle
- Eight detent throttle handle
- Reverser handle with centered position
- Brake handle and spring-loaded horn handle
- Push-on/push-off bell button
- Front and rear headlight knobs with dim and ditch light settings
- Auxiliary buttons that can be assigned to any DCC function
- Works with any standard DCC decoder
- Interfaces to any DCC system (with separate receiver specific to your DCC system)
- Highly configurable to suit your operating style
- Designed and built in the USA!
- Securely store your throttle with the ProtoThrottle Pocket (sold separately)
- EMD-style knob and handle upgrades available from Scottys Model Shop
Specifications:
- Approximate Dimensions: 7.6(L) x 3.2(W) x 3.0(H) inches
- Approximate Weight: 15oz
- Powered by 2x AA batteries (not included)
N Scale Laser-Cut 2-Lane Curved Wood Grade Crossing - 14-16in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights.
Earth Color Liquid Pigment - 4 Ounce Bottle-Concrete
This is an amazingly simple system for coloring terrain and plaster castings such as rocks, retaining walls, culverts and tunnel portals. Beginners get craftsman-quality results. The Earth Colors Liquid Pigment Concrete.Use to stain rocks, plaster castings and terrain. Water soluble colors can be diluted and blended in endless combinations to model a variety of scenic effects. Extremely concentrated for economical use, each bottle includes four ounces of liquid pigment. (Photo shows plaster rock casting, sold separately, stained with this color.)
HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (RCAF Camo) #6644
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Switch Stand - Kit
The Rix Switch Stand works directly off the throw bar from any type turnout. Rotating target turns 90 degrees as the turnout moves. This is not a ground throw. The target only rotates when the turnout is operated by some other source. Includes switch ties, throw bar, target, linkage and housing.
Vallejo 73801 - Model Wash - Weathering FX - European Splash Mud - 40mL Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Blue Grey is recommended for vehicles with a Panzer Grey base color, as well as all vehicles with a similar grey base.
HO Cable Reels - Laser Cut Wood Kit
3 sizes
Broadway Limited - New York Central
HO Scale EMD F7A Short Lightning Stripe Paragon3 Sound/DC/DCC
The EMD F7 was a 1,500 horsepower (1,100 kW) Diesel-electric locomotive produced between February 1949 and December 1953 by the Electro-Motive Division of General Motors (EMD) and General Motors Diesel (GMD).
Although originally promoted by EMD as a freight-hauling unit, the F7 was also used in passenger service hauling such trains as the Santa Fe Railways Super Chief and El Capitan.
The F7 was the fourth model in GM-EMDs successful line of F unit locomotives, and by far the best-selling cab unit of all time. In fact, more F7s were built than all other F units combined. It succeeded the F3 model in GM-EMDs F unit sequence, and was replaced in turn by the F9. Final assembly was at GM-EMDs La Grange, Illinois plant or GMDs London, Ontario facility.
The F7 differed from the F3 primarily in internal equipment (mostly electrical) and some external features. Its continuous tractive effort rating was 20% higher (e.g. 40,000 lb (18,000 kg) for an F7 with 65 mph (105 km/h) gearing, compared to 32,500 lb (14,700 kg) for an F3 with the same gearing.) A total of 2,366 cab-equipped lead A units and 1,483 cabless-booster or B units were built. Many F7s remained in service for decades, as railroads found them economical to operate and maintain.
NEW Paragon3 Sound & Operation System FEATURING ROLLING THUNDER with Authentic Sounds and Prototypical Operation in both DC and DCC environment
- Locomotive Composition: ABS Body with Die Cast Chassis
- Couplers: (2) Operating Kadee or Compatible
- Compatible Tracks: Code 70, 83, 100 Rail
- Minimum Operating Radius: 18 in or greater
Spoke Shave
One piece metal construction, comes with one adjustable blade. For shaping and smoothing the round surfaces of wooden rods and shafts such as wheel spokes, chair legs, arrows, canoe paddles, surfboards, etc.
3-1/2in total width.
HO EMD GP40 - DCC Ready - Canadian National (Stripes) #4013
1978+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO 19,600 Gallon Tank Car - Cerestar (NATX) #190174
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Built: BLT 11-99
HO Bathtub Coal Gondola - DREX (ex-Procor) #104061
Built: 5-05
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO Chemical Distributor - Kit
FEATURES:
All-new contemporary trackside industry!
Perfect stand-alone or as part of a larger operation
Fits 1960s to present day
Great value with 5 complete structures:
- Main Building
- Shipping Building
- Free-standing Office
- Storage tanks with containment basin
- Pipe Bridge
Detailed steel walls
Dual-loading rack for shipping building interior
Two loading racks for rail cars
Four truck docks with doors and seals
Realistic piping
Molded in five colors
Measures:
Office - 1-13/16 x 5-13/16 x 2-1/4 inches
Main Building - 13-13/16 x 9-3/8 x 5-1/8 inches
Shipping Building - 9-1/2 x 5-7/16 x 5 inches
Storage Tanks - 5-11/16 x 5-1/2 x 5-1/2 inches
ProtoThrottle Receiver for NCE Cab Bus and Lenz XpressNet
This receiver connects the ProtoThrottle to an NCE command station or Power Cab, (Note: The ProtoThrottle does not work with the NCE Power Cab v1.1. An upgrade chip can be purchased from NCE) using the Cab Bus protocol or to a Lenz command station using the XpressNet protocol. It receives the wireless signal(s) from multiple ProtoThrottles and communicates them directly to the command station over the Cab Bus. The NCE fast clock time can also be sent to the ProtoThrottle for display on its LCD screen.
Specifications:
3.5(L) x 2.3(W) inches
HO RTR 68Ft Bulkhead Flatcar - Illinois Central #978698
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
HO Double-Track Railroad Bridge Stone Abutment - Resin Casting
DIMENSIONS:
Approximately 5 x 3/4 x 5-7/8 inches
FEATURES:
- Common prototype design used with various types of bridges
- Fits steam, diesel and modern-eras
- Highly detailed parts
- Use with Cornerstone double-track bridges
Russell Snowplow - Ready to Run - Grand Trunk Western #55461 (red, black)
Product Information
Take on winters worst with a WalthersProto Russell Snowplow on the job! In service since the 1920s, all-steel plows like this are a must have for railroads big and small, and look great spotted on a siding or near the engine shed during the warmer months too! Completely retooled and superbly detailed, each HO Scale model features:
Limited edition - one time run of these roadnumbers!
Prototypes in service 1920s to present
Fully-assembled, railroad ready - undecorated kit also available
Factory-installed grab irons
Complete underbody w/brake gear & piping
Custom front truck for tighter curves
Detailed flanger
Thin profile stirrups
Window -glass-
Ultra-Smooth rolling metal axles and 33inch wheelsets
Proto MAX(TM) metal knuckle coupler on rear of plow
Railroad-Specific Details:
See-through -steel- or original -wood- running boards
Sturdy hinged & positionable side wings in two styles w/wire cross braces
Fitted w/original or one of three styles of late headlights as appropriate
Bettendorf or roller bearing rear truck
Spray Can - Dark Earth (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
8 Pin NEM652 with Speaker 11x15mm
Note: Please write in the customer notes if you want a sound file programmed and with the locomotive description and/or ESU Sound File Number.
The LokSound 5 Fx is a special feature of the LokSound family: it has no output and is specially designed for use in control cars or drive heads, which require a sound but do not have a model drive themselves. By omitting the engine part, it can still offer all the sound features of the other LokSound 5 members on a size of only 21.5mm x 15.5mm.
LokSound 5 Fx decoders are offered with an 8-pole interface according to NEM652 or a 21MTC cutting point and always come with an 11 x 15 mm sugar cube loudspeaker and sound capsule kit.
Modes
Like all family members, the LokSound 5 Fx is a true multi-protocol decoder. It masters the DCC data format as well as Motorola(R), Selectrix(R) and M4. In DCC format, 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses and up to 32 functions. With the help of RailComPlus(R) technology, the decoders register fully automatically at a suitable digital center.
It masters all DCC programming modes and can be both driven and programmed with compatible digital centers: Thanks to RailCom(R), it is possible to read out the CV values on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.
Motorola(R) users benefit from up to 28 driving steps at 255 addresses. Three additional Motorola(R) addresses enable the triggering of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.The M4 protocol allows automatic login to mfx(R)-compatible control panels.
The LokSound 5 Fx Decoder detects the Marklin(R) brake distances as well as ZIMO(R) HLU brake commands or the Lenz(R) ABC system. Also the brakes with DCC brake blocks or with DC voltages possible. It also stops with a Selectrix(R) brake diode. An ABC commuter train system allows automatic commuting between two stations.
The LokSound 5 decoder can be used on analog DC and AC webs.
The decoder switches on-the-fly fully automatically between operating modes. Most of the time, nothing needs to be adjusted.
Sound
The LokSound 5 Fx decoder can play up to 12 channels simultaneously. Each channel can be resolved with up to 16 bits / 31250 kHz and offers hi-fi quality on your system. There is virtually no difference to the original audible anymore. A Class-D audio output stage with up to 3W output controls the speakers, which may have between 4 ohms and 32 ohms impedance. A 128 Mbit sound memory provides enough capacity.
All individual noises can be adjusted individually in the volume. The super-flexible sound gine without a rigid schedule allows the exemplary simulation of all conceivable rail vehicles.
Functions
There are also some lights to turn on in the control car or drive head. Thats why we have equipped the LokSound 5 Fx with 6 reinforced function outputs. In the version with 21MTC interface, 6 outputs are added for controlling servos or logic level outputs. All important lighting functions are available. The brightness of each output can be set separately.
Motor
Although the LokSound 5 Fx itself does not have an engine output, it still simulates one. This is used for synchronization with the motor car, where ideally a full-fledged LokSound 5 decoder performs its service. In the train bandage, this ensures that the brake squeak takes place at the same time or that the lamps also switch the direction of travel at the same time.
Operational reliability
A PowerPack can be connected to the LokSound 5 micro DCC Direct Kato USA on request to bridge dirty rail section
N Scale Railroad Decal Set - Canadian Pacific Modern Boxcars 1970+
HO GP9RM - DCC & Sound - Canadian National (Stripes) #4101
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
Weathering Powder 1oz (29.6ml) - Brick Red
HO Scale 1980-1985 Chevrolet Impala Sedan - Assembled - Police (Blue)
The Rapido Chevrolet Caprice and Impala cars feature:
Both Wagon or Sedan carbodies
1980s body style designed from photos and drawings
Multiple front grille designs covering the entire 1980s
Real rubber tires (and white walls too, where appropriate)
Multiple rim designs (wire spoke, dog dish and more)
Realistic chrome finish on bumpers, rims and more!
Curved Light Ver. 2
Operates on 16V DC or AC
LED light source = longer life
Brass construction
Prototypical size for N scale model railroad layouts
Quick fit base removes the need for gluing, nailing and screwing - Just Drill and Drop
Lights come with quick connection plug in wire harness.
Connects directly to power source. Resistors included.
Light can be removed from mounting base and replaced with different style to change the look of any street or highway on your layout.
HO 60ft Hi-Cube Plate F Boxcar - BNSF #761261
Bring your freight car fleet up to date in minutes with the Walthers Mainline(R) 60ft Hi-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft Hi-Cube Plate F Boxcar include:
-Limited edition - one time run of these roadnumbers
-Prototypes now in service with TTX and several railroads
-Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
-Prototypically correct roof with both X and diagonal panels
-Separately applied latch bars
-Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
-100-ton roller bearing trucks
-36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
Painted Unlettered - (black)
This Bachmann Silver Series(R) Scale Test Weight Car is a model of typical the diminutive cars used to calibrate track scales used for measuring car and load weights. They were used to check axle load limits and to determine the billing of customers for cargo loads. Scale Test Car features a die-cast metal body with realistic decoration, metal wheels and body-mounted E-Z Mate(R) magnetic knuckle couplers.
HO NSC 5304 Boxcar - Canadian National (Red) Unlettered
The Rapido NSC 5304 cu.ft. CN Combo Door Boxcar features:
Separate grab irons installed at the factory
100-ton Barber S-2 trucks, with metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe
HO Crates, Kegs & Barrels Set (30pcs)
Loads of unfinished metal cast details to make your loading dock complete! Set consists of: 2 of every crate, keg, and barrel in our product line for a total of 30 pieces.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - KRRX #4719
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
B-100-40 Boxcar: Golden West - Ventura County - Single Car #140001
Detail Variations:
6-pack includes the following numbers:
#140001
#140002
#140006
#140009
#140014
#140017
Our B-100-40 model features the following details:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Genuine Kadee #158 Whisker couplers
Newly tooled trucks with turned metal 36 Inch wheels
Separate door rods and door tracks
Road number specific number patches
Separately applied coupler cut levers
B-100-40 Boxcar: SP/UP Shield Repaint - Single Car #656318
Detail Variations:
6-pack includes the following numbers:
#656293
#656318
#656319
#656389
#TBA
#TBA
Our B-100-40 model features the following details:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Genuine Kadee #158 Whisker couplers
Newly tooled trucks with turned metal 36 Inch wheels
Separate door rods and door tracks
Road number specific number patches
Separately applied coupler cut levers
Data - Freight -1 Ton - Black & White Lettering - Large Capacity - Waterslide Decal
1985+
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Norfolk & Western
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
HO 1.5 Amp Mobile Decoder with 21MTC Interface
FEATURES:
Mobile Decoder
21MTC interface with Configurable Logic Level or 12v F3-4 function outputs
1.5 Amp/2 Amps Peak
6 FX3 Functions, 0.5 Amp
Series 6 Decoder Features
Works with PX112-2 Power Xtender
.824inchx.64inchx.17inch
20.92mm x 16.26mm x 4.32mm
Features:
FX3 Function outputs for prototypical lighting effects and on/off control:
Constant Brightness Lighting with directional or independent control.
Realistic Effects like Ditch lights, Mars lights, strobes, and many more
FX3 & Standard Function Qualifiers operate functions based on direction, F0 on or off, direction and F0, and whether loco is moving.
Function Remapping for custom function setup.
Master Light Switch turns off all lights & functions with one keystroke.
Advanced Consist Function Controls
Digitrax LocoMotion System-Your locomotives look like the real thing.
The Digitrax LocoMotion System makes them run like the real thing, too!
Torque Compensation for smooth as silk silent operation.
128 Speed Step operation (14 or 28 steps can also be used).
Momentum with acceleration and deceleration.
Normal Direction of Travel is user selectable.
Switching Speed feature for easier and faster access to yard speeds.
3 Step Speed Tables set start, mid and max voltage for custom control.
28 Step Speed Tables with 256 level resolution for precise control.
Configurable Logic Level or 12v F3-4 function outputs.
Program CVs using any Digitrax Compatible Control system without having
to buy any extra equipment.
Compatible with Locomotives using the 21MTC Interface
Series 6 Decoder Features.
Works with PX112-2 Power Xtender.
Configurable FX3
Pulse Function available on all function outputs.
2 Digit and 4 Digit Addressing.
Basic, Advanced & UniVersal Consisting.
SuperSonic motor drive for silent operation.
Direct mode programming.
Transponder Equipped ready for transponding on your Layout.
Motor Isolation Protection helps prevent damage to your decoder.
DCC Compatible.
FCC Part 15, Class B RFI compliant.
High Self Adhesive Daffodil Tuft Strips - 4mm (10 strips)
10 4mm high self adhesive daffodil tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.
OVR Exclusive - HO Bi-Level Auto Rack - CP Rail/TTGX #603858
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO B-50-15 Boxcar - As Built w/ Viking Roof - Southern Pacific (1946 to 1952 scheme) #15242
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
HO Peterbilt 389 Sleeper Cab Tractor w/Pneumatic Bulk Trailer - Green, Black, Purple, Chrome
The rural elevator was more than just a trackside industry. It was the center of many rural communities. And in some places it WAS the community. Handling grain from local farms and selling it to distant markets, these older buildings are still active today. With its colorful signs and period styling, this HO Scale elevator is perfect for your layout and your favorite era, from the 1800s to present day. The kit includes the main elevator, plus a storage building and a scale house, all with realistic wood walls. Separate doors and windows add to the realism, along with colorful decals for several grain companies.
Realistic wood construction
Includes elevator, scale house and trackside storage building
Use with other Walthers Cornerstone grain handling structures
Easy-to-build plastic kit
Molded in appropriate colors
The Farmers Cooperative Rural Grain Elevator measures:
Elevator: 8-7/8 x 7-1/4 x 10in 23 x 18 x 25cm
Shed: 7 x 4-1/2in 18 x 11cm
Metals Bank
Cast Hydrocal plaster walls, plastic door & windows and full color paper signs and awnings. Perfect for your business district from the cracked stucco to the rusty tin staircase, this building is just brimming with character. A real blue collar working man s bank, kit features detailed Hydrocal castings, plastic doors and complete, easy-to-understand directions.
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
HO Ladder with Safety Cage (1pc)
Use on towers, tanks, buildings and other tall structures where a ladder is perpindicular (or 90¡) to the ground. Precision Injection Molded in Gray ABS. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
SCALE
HO
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
27/64
HEIGHT IN MM
10.7mm
LENGTH IN INCHES
4-7/8
LENGTH IN MM
125mm
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15164
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Forklifts, Wheelbarrows, Handtrucks, etc. (Kit)
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Orange) #506492
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
Shaper Sheet (18 x 72 inch roll)
Use this unique material to model all types of terrain. The strong, pliable sheet can be shaped and reshaped to create any level of detail, and it holds its form without any understructure. This material is formulated to mechanically bond with the plaster to create a thin, hard shell ready for landscaping. Ideal for layouts, backdrops, dioramas, displays and arts & crafts.
1 Roll/pkg - 9 inches wide x 72 inches long, 4.5 ft2
HO New Look Bus - Metropolitan Provincial (Montreal) - Montreal - Deluxe #7276
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
HO RTR 53Ft Rivet Side RoadRailer Trailer - Norfolk Southern (Triple Crown) #460003
Rivet Side Large Triple Crown Norfolk Sou.
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
N Scale Deck Girder Bridge - 4-31/32 inches (124mm)(Gray)
Atlas Trainman HO
2 Bay Off set Hopper with Flat Ends Canadian Pacific #357093
HO H-6-G - DCC & Sound - Painted/ Unlettered - Wood Cab
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
Evergreen Scale Models - OD White Polystyrene Rod .047In x 14In (10 pcs pkg)
HO 45Ft Trailmobile Dry-Van Trailer - Silver, Unlettered
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
Athearn Genesis G15437 - HO ACF 4600 3-Bay Center Flow Hopper - SOO #74057
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - As above but with double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve, and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36in machined metal wheels and animated spinning roller bearing caps
PROTOTYPE AND BACKGROUND INFO:
The 3-bay Center Flow covered hopper first entered service in the mid-1960s, built by American Car and Foundry. The cars handle loads such as grain, corn, and similar bulk commodities. The Center Flow design relies on the car?s rounded body to provide structural strength - eliminating the traditional center sill and making gravity unloading easier.
Our 3-bay car represents the common 4600 cu.ft. capacity version. The railroads looking to replace their aging 40? box cars in grain service needed a modern hopper design - one that could operate within the tighter Plate B clearances for light branchline and industrial service. ACF?s design won them many contracts from a plethora of railroads. One can find these cars still in revenue service today in grain trains and other similar service.
HO RTR PS-2 2600 Covered Hopper - Norfolk & Western (NW) #170729
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
N Scale Dash 8-40CM - DCC Ready - Canadian National: Large Noodle #2415
Our N Scale Dash 8-40CM model features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
Heavy, die-cast chassis with a powerful motor and dual flywheels
Operational headlights and rear lights with operational factory-installed ditch lights (plus rock lights on BCOL locomotives)
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
Factory-installed couplers mounted at the correct height
GATC 20,000-Gallon GS Tank - GATX/Cargill #45977
MODEL FEATURES:
- Fully-assembled and ready to run out of the box
- All models are representative of prototypical paint schemes
- Weighted for trouble-free operation
- Body mounted McHenry operating scale knuckle couplers
- 70 or 100-ton Roller Bearing trucks with animated spinning bearing caps per prototype
- 33 inch (70-ton) or 36 inch (100-ton) machined metal wheels with RP25 contours operate on all popular brands of track
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- 3-Packs feature unique numbers not available separately!
- Highly-detailed, injection-molded body
- Separately applied brake wheel and ladders
- Painted and printed for realistic decoration
- Replacement parts available
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Perfect starting point for adding grime and rust
- Faded base colors matched to the prototype
HO Modern Yard Tractor - Atchison, Topeka, & Santa Fe #5344
Completely assembled
Many separately applied parts
Interior details
Rubber tires
Photo-etched steps and rear deck
Adjustable 5th wheel height
Clear window glazing
As seen in intermodal yards around the country
PROTOTYPE AND BACKGROUND INFO:
A terminal tractor, also known as a yard tractor, is a kind of semi-tractor intended to move semi-trailers within a cargo yard, warehouse facility, or intermodal facility, much like a switcher locomotive is used to position railcars.
Built-&-Ready Landmark Structures - Harrisons Hardware
Assembled - 4-19/32 x 3-5/8 x 4-1/2 inches (11.7 x 9.2 x 11.4 cm)
Well, you may not find a Left Handed Monkey Wrench here, but stores like Harrisons were the best place to find just about anything else you might need in the way of tools, screws, nails, bolts, paint and thousands of other supplies.
A great addition to any street scene, this two-story commercial building comes with colorful signs, a dumpster and merchandise piled out front for display.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23004
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
3-Cluster MU Hoses 36in - Pre-1980 Locos
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - Denver & Rio Grande Western(TM) Rack /Trailer-Train Flatcar TTKX #802548
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers
N Scale 40ft Boxcars - CN Buffalo (4pk), with Foam Nest
Road #429004, 429049, 429053, 429245
Built in the mid-1950s to carry newsprint, these 40ft boxcars with Bettendorf trucks were converted to carry grain in the late 1980s, in a project financed by the Government of Canada. They were known as Buffalo Boxcars. Canadian National is one of the largest railroads headquartered in Canada, with over 20,000 miles of track and service from Canada into the United States.
Mixed Trees w/Flat Base (25pk)
FEATURES:
- Ideal for HO, N, TT and Z Scales
- Fully assembled, ready to plant anywhere along your railroad
- Perfect for new or existing scenery
- Sturdy, flexible plastic tree form
- Trunks feature realistic texture and gray-brown color
- Makes foreground or any highly visible scene more realistic
- Detailed flat base for fast and easy installation anywhere
- Blends easily with existing scenery
- Two realistic colors of foliage on every tree
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
HO FGE 57Ft Mechanical Reefer - DCC Ready - UP/ ARMN #922042
Detailed Information
57Ft MECHANICAL REEFER FEATURES:
Available with onboard SoundTraxx sound
Scaled from prototype manufacturers drawings and field measurements
Repaints often vary by road number in the size and style of the reporting marks, car numbers and patch shapes
See-through protective screens on the genset end
Detroit Diesel 2-71 Genset visible inside
End wall corrugation visible inside
Inner refrigerator bulkhead
See through end platforms
Two different exhaust stack types: straight pipe with -flapper- or T-shaped -smokejack- per prototype and era
Full underframe detail including Keystone cushioning, air brake reservoir, control valve, brake cylinder, brake plumbing, and fuel tank
Factory applied end ladders and door closure rods
Trainline hoses with silver ends
Three different coupler cut lever styles per prototype
Body-mounted or truck-mounted brakes per prototype
McHenry operating scale knuckle couplers
100-ton roller bearing trucks with rotating bearing caps
Fully-assembled and ready-to-run
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Machined metal wheels with RP25 contours
Weighted for trouble-free operation
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO ET44 Tier 4 - DCC Equipped - CN/100th Anniversary #3242
Road number 3108 Has a black cab roof; does not have the circle graphic on the nose
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Seaboard Air Line #19792
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 59Ft 4550 Cu. Ft. Cylindrical Covered Hopper - Trough Hatch - Santa Fe (ex-Koppel) #317510
National Steel Car Co. 59Ft, 4550 Cu. Ft. Cylindrical Covered Hopper - Trough Hatch
The car is commonly referred to as the -Canadian grain car-. Between 1972 and 1985 almost 20,000 cars were built for the Canadian government to assist the Canadian railways in transporting vast quantities of grain. Canadian National, Canadian Pacific, and other companies own or lease this type of car.
The trough hatch cars feature road name specific parallel ribbed roof hatches, diagonal ribbed -zig-zag- roof hatches, or smooth flat hatches as per the prototype. All cars feature numerous wire details, etched metal roof walks, laser sharp painting and lettering, accurate colors, 100 ton trucks with 36inch metal wheelsets, and metal knuckle couplers.
Cab Window Shades for Southern & Norfolk Southern Diesels
HO 60Ft Bulkhead Flat - Southern Pacific SP (3pkg)
Road numbers: #509349, 509381, 509440
MODEL FEATURES:
Separately applied end details and brake wheel
33inch machined metal wheels with RP25 contours
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0041
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 10 Inch Track Alignment Gauges - Curved - 22 Inch Radius
RibbonRail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking, and joining rail. Track Alignment Gauges are precision machined to NMRA standards and will work on any code of HO Scale rail. Available in many curve radii as well as straight.
Built-&-Ready Landmark Structures - Community Church
Assembled - 5-1/4 x 6-13/16 x 7-3/8 inches (13.3 x 17.3 x 18.7cm)
Features double entry doors with frosted glass panes, clapboard siding and tall stained glass windows.
Code 83 Warren Truss Bridge - HO Scale
Talus - Fine Buff (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings, and/or road cuts. Intermix grades and blend shades for the most realism. Color natural talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle talus and secure with scenic cement (#191).
Particle size - Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.188 (9pcs pkg)
HO Scale H1b Hudson Steam - DC/DCC Ready - Canadian Pacific (Beaver Shield) No #
-Late walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO N7 Class Steel Bay Window Caboose - Penn Central (Green Repaint 1975+) #21753
Product: Despatch Shops Inc. NYC Lot 782 – N7 Class Steel Bay Window Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Gould plain-bearing trucks with separate brake beam part
Wheels: CNC-machined standard RP25 .110inch tread 33inch wheels
DC/DCC Lighting Features: Interior Lights and End Marker Lights
Penn Central (PC) N7 Green Repaint 1975+ represents the most common scheme applied by Penn Central to the N7 class of DSI cabooses. Wearing the classic PC green colors that Tangent replicates better than anyone in the industry, these cabooses feature the large road numbers on the left side of the car and the italicized PENN CENTRAL above the cupola. The roof is black per PC practice, who also removed the running board and end ladders at the time of painting. Check out that classic PC replacement smokejack. Dont forget the bright yellow safety steps! The fully-painted interior features black seats and stove, and light green cabinets and walls which was the selected interior color. The interior is lit, as are the tiny pairs of red marker lights on each end that PC applied to these cabooses. Eagle-eyed modelers will notice the -POOL- denotation on the end doors of this caboose to denote their pool service status (i.e. they ran everywhere). Finally we round these cars out with the application of ACI labels, which was a standard PC practice for these cabooses. We offer this scheme in four prototypically-accurate road numbers.
Morgan Olson Route Star Van - Road Cones Ice Cream Food Truck
Modernize HO highways in minutes with these new Morgan Olson(R) Route Star Van replicas! Based on the popular delivery vehicles seen from coast-to-cast, these layout-ready models include a wide range of details and colorful printed graphics. Check out these other great features:
Newly tooled officially licensed replica!
Contemporary delivery vans and food truck versions!
Five authentic body styles with correct rear doors
Prototypes seen all across North America serving small businesses & fleet operators
Fully assembled
Full-color graphics
Detailed driving compartment w/interior bulkhead
Brass Strip - 12inch x 1/2inch x .025inch
Length: 12inch
Width: 1/2inch
Thickness:0.025inch
HO Duplex Sleeper - VIA Rail Canada #1150 / Estcourt
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Violet
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
HO Slab-Side Covered Hopper (8 Hatch) - Canadian National (CN Noodle) #353620
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
HO Scale NSC 73Ft Centerbeam Flatcar - Trailer Train (TTZX) #861205
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
HO 54ft 23K Funnel-Flow Tank Car - Corn Products #1988
Add variety to your modern HO fleet with these WalthersProto replicas of the 54ft 23,000-Gallon Funnel-Flow Tank Car! Packed with details including the unique funnel-shaped body that speeds unloading on the prototypes, other features include:
- One time run of these roadnumbers, order now - limited quantity available!
- Introduced in the 1960s, still built and operated today
- Prototypes handle all types of petroleum and food products
- Etched metal walkways and platforms
- Factory-applied grab irons
- Brake train pipe and brake rigging underbody detail
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling metal axles and 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Peterbilt 389 Sleeper Cab Tractor w/Pneumatic Bulk Trailer - Cerri Family Feed
(silver, red, chrome)
N Scenic Accents(R) Figures -- Ice Skaters pkg(7)
HO Right Curved Track w/10-degree Radius - 34 1/8in (867mm)(2/pkg)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes! Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation.
Suitable for all types of layouts, temporary or permanent, this modular track system features an integrally molded roadbed for realistic appearance.
Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
HO GP40-2 - DCC Ready - ONT #2202
Detailed Information
ONT FEATURES:
Ex-B&M
Corrugated grilles
Non-dynamic hatch
Front and rear ditch lights
Side-mounted hood bell
M3 horn on long hood
Blomberg M trucks
Large fuel tank
Large front anticlimber
Small EMD front plow
Lit number boards and class lights if equipped (effect in DCC)
The Ontario Northland Railway is operated by the Ontario Northland Transportation Commission, part of the government of Ontario, Canada. Purchased in 2005, these ex-BM GP40-2s were repainted into this bright and vibrant scheme. A few kept their nose class lights after rebuild. The units have been seen operating in both freight and passenger service.
ROAD NUMBER SPECIFIC FEATURES:
#2200
Ex BM 311; class lights
#2201
Ex BM 300; removed class lights from nose
#2202
Ex BM 304; nose class lights only
GP40-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO Scale NSC 73Ft Centerbeam Flatcar - Trailer Train (TTZX) #861322
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
B-6 - HO 3/4in Clear Jewels (12/pkg)
HO SCALE - BUT CAN BE USED IN OTHER SCALES - MEASURES 0.055 inches
HO ALCo RS-3 - DCC Ready - CP (Script) #8438
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO Scale SD30C-ECO - DC/DCC Ready - Canadian Pacific #5013
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
HO Enterprise 2-Bay Covered Hopper - New York Central (NYC Roman) #881702
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
Tidy Wire Kit - Just Plug Lighting System
Kit Contents
12 - Wire Mounts 1/2inch x 1/2inch (1.27 cm x 1.27 cm)
24 - Twist Ties 4inch (10.1 cm)
20 - Labels 3/8inch x 2inch (9.5 mm x 5.08 cm)
Instructions
Install quickly and easily to keep cables secure, tidy and easy to access for expansion. Adhesive-backed Wire Tie Mounts secure cables and Wire Ties bundle cables neatly. Use Labels to identify connections.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #1141
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO MLW M630 - DCC & Sound - CP Rail (Multimark) #4557
8inch stripe w/out water expansion tank, w/ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound V5 decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
HO Scale Angled Back Alco Diesel Number Boards - pkg(4)
Product Information:
Plastic boards and brackets, with photo-etched brass fronts for large or five-digit style numberboards.
HO 57Ft Mechanical Reefer - Union Pacific (UPFE) #455890
Product Information
Move all kinds of perishable products on your HO railroad with WalthersMainline 57Ft Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s. Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including:
One time run of these roadnumbers, order now - limited quantity available
Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
Keystone or Hydra-Cushion underframe detail as appropriate
Short ladders and low hand brakes
9Ft Youngstown plug door with separate latch bars
Authentic Stanray peaked, ribbed roof with capped exhaust stack
Detailed underbody with brake gear and fuel tanks
70-ton roller bearing trucks
Correct 33Inch RP-25 turned-metal wheelsets
Proto MAX metal knuckle couplers
40Ft Corrugated Container Safmarine 2pk
MRKU 034718(5) and MRKU #034721(0)
EMD E8B (DC/DCC/Sound) Union Pacific #924B
Rapidos E8 model features:
- 3D laser-scanned body shell
- Accurate nose and roof contours
- Seven different noses
- Three different back ends
- Two different sides with and without lifting lug covers
- Three different steam generator options
- 36inch fan, 48inch fan or non-dynamic brake options
- Single- or dual-headlight configurations
- Freight or passenger pilots
- Three styles of side grills
- Original porthole sides or rebuilt with blanked sides (including unique variations)
- Skirted or non-skirted fuel tanks
- Original square and sloped or Hyatt roller bearing journal boxes
- Heavy die-cast chassis
- Smooth running drive system with all wheels powered
- Complete lighting effects headlights, class lights, backup lights, ground lights, cab lights and more
- Numerous road-specific detail parts in both plastic and etched metal
Details Include:
- Side portholes
- 48inch fan dynamic brakes
- Single MU door nose, right of headlight
- Nose door headlight
- Freight pilot
- UP rear
- Nose side grab ladder
- Cab side lifting lug covers
- Hyatt bearing trucks
- Single steam generator
- Modified vertical Farr grill
- Side skirts
- UP roof snow shields
HO 60ft PS Auto Box - Norfolk & Western/NW #600410
MODEL FEATURES:
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Fully detailed full cushion underframe
- Full underframe detail: air brake reservoir, control valve,
- Separately applied door closure rods, side ladders, metal grab irons and brake cylinder with plumbing and brake rod details
- etched metal end platforms
- 100-Ton roller bearing trucks with operating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Machined metal wheels
- Weighted for trouble free operation
- Multiple road numbers
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
During the 1960s, Ford Motor Company, Pullman Standard and Santa Fe pooled their resources to develop a standard boxcar to meet the transportation needs of automobile manufacturers in the United States. Delivered in 1965, the Pullman Standard auto parts boxcar is the most prolific example of this type of freight car. It ultimately changed the face of automobile manufacturing and rail transportation.
PRIMED FOR GRIME MODELS FEATURE:
- Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Some Prime for Grime models feature paint scheme variations.
N Scale Cape Cod House - Kit
The Walthers Cornerstone Cape Cod House is typical of homes constructed across the continent beginning in the mid-1950s and thousands are still in use today. This two-story frame house looks at home in neighborhood scenes as well as in older city neighborhoods. The easy-to-build Cape Cod House kit includes two different front walls and two styles of doors so you can add several to your neighborhood tract without repetition. The kit also comes with colorful printed window treatments and parts molded in appropriate colors.
As shown the finished model measures: 2-3/8 x 2 x 1-5/8 inches (6 x 5 x 4.1cm)
-Typical North American suburban home design
-Used coast to coast
-Built beginning in the mid-1900s and still lived in today
-Two different front walls and doors for easy customizing
-Separate doors, windows and details
-Easy-to-build plastic kit
-Molded in appropriate colors plus clear window glazing
GP38-2 - DCC & Sound - TP&W/Red & White #2001
DCC–READY SPECIFICATIONS:
DCC: Ready/21-Pin NEM
SOUND: Ready
PROTOTYPE MANUFACTURER: EMD
Axles: 4
LIGHTED: LED Lighting
FULL ROADNAME: TP&W
Minimum Age Recommendation: 14 Years
Is Assembly Required: No
DCC+SOUND SPECIFICATIONS:
DCC: Equipped
SOUND: Tsunami2
PROTOTYPE MANUFACTURER: EMD
Axles: 4
LIGHTED: LED Lighting
Minimum Age Recommendation: 14 Years
Is Assembly Required: No
TP&W FEATURES:
Mid-production version
Corrugated grilles
88Inch nose with anticlimber
2600 gal fuel tank
All-weather window on engineers side
Blomberg B style trucks
Non-dynamic brake housing w/angled paper air filter box
TP&W bought these GP38-2s brand new in 1977. They eventually were repainted into Santa Fe colors after the merger in 1984.
ROAD NUMBER SPECIFIC FEATURES:
#2001
As delivered paint. Weed-cutter style front plow
Rear MU cable catch bracket
3 chime Leslie horn
single Sinclair roof antenna.
#2004
As delivered paint. Weed-cutter style front plow
Rear MU cable catch bracket
3 chime Leslie horn
single Sinclair roof antenna.
#2005
Revised later paint scheme. EMD style short plow
larger numbers on cab
-TP&W- on the nose
painted out rear class lights
plain rear pilot
3 chime Leslie horn
and single Sinclair roof antenna.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED bulbs for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PROTOTYPE SPECIFIC INFORMATION
By the early 1970s, many first generation diesels were reaching the end of their service lives. The most common replacement locomotive became the GP38-2. EMD began production of the 16-cylinder, non-turbocharged, 2000 horsepower engine in 1972. Unlike the GP38s engine, which drove a generator to supply power to the traction motors, the GP38-2s prime mover drove an alternator which produced AC electrical current that was rectified to DC to power the four traction motors. Another major change for the GP38-2 was the introduction of the -dash 2- modular electrical cabinet. For more than 40 years, the GP38-2 has worked main line freights, locals, switching jobs, yard service, helpers, snow fighting trains, and hump power. Many remain in service today.
Screw Terminal Kit for PSX or PSXX Power Shield Circuit Breakers (6pcs)
A complete screw terminal kit for a single PSX or PSXX circuit breaker. For example, if you order a PSXX2, order two Screw Terminal kits. Each kit comprises 22 PINS so you can easily wire your LEDs, Opto Sensors, and other hardware to the PSX Circuit Breaker.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - KRRX #4732
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO B36-7 - DCC & Sound - Conrail (White Sill Stripe) #5046
The B36-7 Locomotive features:
Incredible underframe detail including piping, a ridiculous number of separately-applied parts and full cab interior
Dead straight metal side handrails with plastic stanchions
A crazy level of road-specific detail options, with different pilots, anticlimbers, plows, fuel tanks, air dryers, antennas, wind deflectors, headlight locations, air-conditioning units, different bodies, multiple nose and rear end styles, three versions of drop step and so on...
With or without class lights (as appropriate)
Conrail locomotives come with their unique -red bug eye- marker lights
Equipped with ditch lights - on front and/or rear - as appropriate
ATSF and Southern Pacific locomotives have Stratolite beacons
Three styles of operating, flashing ditch lights, front & rear (as appropriate)
Working headlights in correct location, switchable number boards at both ends and cab interior headlight
Metal Knuckle Couplers
All units come equipped with DCC/ESU LokSound
Plastruct 91887 Brick Paper Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
7-1/2 x 10
HO 100-Ton Open Hopper - Upper Merion Plymouth #7418
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
HO 55Ft Evans 4780 Covered Hopper - ADM (UELX) #10009
Product Information
Expand grain traffic along your HO railroad with a fleet of WalthersProto 55ft Evans 4780 Covered Hoppers! Introduced in 1977 and still going strong today, they can be found handling all types of grains and dried distillers grains used for animal feed. Fully assembled and ready for service, features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint and lettering
Ultra-smooth rolling 36inch RP-25 turned wheelsets
Proto MAX(TM) metal knuckle couplers
HO Buda Wheel Stop (2/pk)
HO 70-Ton 12-Panel Hopper - Pennsylvania (H39 Bethlehem Blt.) #667291
Blt.2-60
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
Evans X72A Box car: Conrail w/ Small Logo - Single Car #229199
Detail Variations:
As operated between 1976 to the 1990s.
6-pack includes the following numbers:
#229023
#229199
#229328
#229377
#229493
#229844
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
HO Code 100 Custom-Line(R) Crossing - 25-Degree
4-1/2 inches (11.4cm)
Atlas HO Scale Code 100 Nickel-Silver Snap Track is widely used for sectional track layouts. Each section features nickel silver rail on black molded-plastic ties with realistic wood surface detail. Snap Track features molded centerline nail holes for easy mounting with #2540 track nails. Snap track is available in a wide variety of curve radii and straight lengths and is fully compatible with Code 100 flex track and most conventional Code 100 track systems. Snap-Track is designed for use with Atlas Snap Track turnouts and crossings and can also be used with Atlas Code 100 Custom Line turnouts. Adapter track joiners #551 are available so you can also use Code 83 track on the same layout if desired.
Walthers Mainline 54 P-s 4427 CD Covered Hopper Santa Fe No.303036
Matches prototype dimensions
See-through running boards
4-3-4 exterior rib pattern
Bottom outlet gate details
Correct 36inch turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers
N Scale 3230 Covered Hopper - CIT Group (CBFX) #440507
Features:
- All new tooling
- Ready to run
- Injection molded plastic
- Fine scale detail
- Etched metal roofwalks
- Crisp painting and printing
- Magnetic couplers
- Metal wheelsets
The Trinity 3230 Pressure Differential (PD) covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
Bowser HO 50Ft 2 Door Boxcar Reading No 19227
Ready to run
Roller Bearing Trucks with 36in wheels
Knuckle couplers
PS-2 2003 2-Bay Covered Hopper - MILW (4-pack)
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
Light Ghost Gray Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
Plastruct 91853 Wood Paper Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
Athearn Genesis HO 13,600 Gallon Acid Tank Car, UTLX 3 set
Athearn Item #: ATHG25629
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Two different body phases (early and late)
Many separately applied details
Etched metal walkways
Different top platforms as appropriate per prototype
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18in
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry (TM) scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
HO 85Ft General American G85 Flatcar - GTTX (Yellow) #300444
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
HO RTR Ford C Telesqurt - White
Key Features
Ford licensed model
Factory assembled with all detail parts applied
Medium wheelbase chassis with conventional cab
Fully extending Telesqurt arm with fire monitor and photo-etched ladders
Molded cab interior with seperately applied steering wheel
Clear molded windows
Vinyl tires
Detailed Information
Overview:
The Ford C Telesqurt is the latest addition to Athearns Ready To Roll line of fire vehicles. Designed to bring the maximum amount of fire suppression right where it is needed, the Telesqurts telescoping boom raises to place the fire monitor in the thick of the action. This exacting replica is sure to fit right in to any HO fire department.
MODEL FEATURES:
Ford licensed model
Fully extending Telesqurt arm with fire monitor and photo-etched ladders
Clear molded windows
These models are unnumbered and unlettered
Medium wheelbase chassis with conventional cab
Molded cab interior with seperately applied steering wheel
Vinyl tires
HO 85ft ACF 44-Seat Coach - Union Pacific (Katy Flyer) #5468
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
Built as a coach in 1954 by American Car and Foundry, the Katy Flyer provides seating for 44 passengers. The Missouri-Kansas-Texas joined the UP family in 1982, and this car was renamed in 1993 for a train that ran from St. Louis to Galveston, Texas, for 65 years. The Katy nickname came from the KT in the roads MKT reporting mark.
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286333
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
HO Single BiLevel Commuter Car - CalTrain - Unnumbered Coach
San Francisco - Series 3
Note: Unnumbered coaches do not include decals. Decals are available from highball graphics.
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO Scale G2 AC4400CW - DCC & Sound - Chicago & North Western #8801
CNW FEATURES:
Holden K5H Horn
Early body features
Desk style control stand
Fuel tank without notch
Unevenly spaced rear grab irons
Front ditch lights
Fuel tank bolted to the frame
Low number boards
Extended range dynamic brakes
Lipped exhaust tub
As delivered Antenna package
GE Hi-Adhesion trucks
Inside struts on all truck sides
Central air intake in forward position
An earlier purchaser of the AC4400CW, the units purchased by Chicago & Northwestern were again dressed in the attractive -Lighting Stripe- paint scheme, but now with the addition of an Operation Lifesaver decoration on the long hood. The AC traction paired well with the long heavy coal trains CNW was pulling out of the Powder River Basin. Many of these units lasted well after the UP acquisition of CNW in their original paint or with minor patching. These early versions rode on the first iteration of the Hi-Adhesion trucks with struts on all four corners of each trucks that were both shorter and inboard of the brake cylinders compared to later variations.
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Air hose & Angle Cock 20 pkg
SDN144K0a w/Sound
Features:
Board replacement Mobile Sound/Motor/Function Decoder with SoundFX
Board replacement decoder for N Scale Kato P42, E8, PA1, F40 and similar locos
Dual E8/F40 diesel sound scheme pre-loaded compatible with Sound Project downloads!
Includes 13mm 8 Ohm round speaker & 330uF capacitor.
Current Rating 1.0 Amp (1.3 Amps Peak)
Size 2.15inch x 0.55inch x 0.14inch
55.5mm x 13.8mm x 3.6mm
Installation Board replacement
Function Outputs 4-200mA
Function Type FX3
50Ft Berwick Box Car - Detroit Toledo and Ironton
#18807
MODEL FEATURES:
Ready-To-Run
Full under body detail with brake rigging
Overhanging X-panel roof
Non-terminating sine wave ends
Separately applied wire grabs
Detailed end ladders and brake gear
Accurate painting and printing
Blackened metal wheels
AccuMate couplers
Spark Arrestors - Non-lifting Type (2/pkg)
HO Heavy-Duty Overhead Crane - Kit
Product Information
The Walthers Cornerstone HO Scale Heavy-Duty Overhead Crane is a great machine for detailing the interior of many heavy industrial structures. Easily adaptable to operations in any building, this 250-ton capacity crane is designed for maximum detail with easy construction. It includes dual trolleys with hooks and motor details, an operators cab, decals and instructions. Its perfect for the craneways in any heavy industry, and will fit the supports included in the Backshop 933-3039 or the Electric Furnace 933-4604 all sold separately. Use the Heavy-Duty Overhead Crane to add realism to Cornerstone HO Scale industrial buildings.
Great detail for industries
Dual trolleys, operators cab and hook
Fits craneways in several Cornerstone industries
Easy-to-build plastic kit
N Scale AutoFlood III RD Coal Hopper - UP/CMO #504259
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO 73Ft Center Partition Car - TTX (w/Yellow Conspicuity Stripes) #857054
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
HO - 89ft Thrall Bi-Level Auto Carrier - Ready To Run - Norfolk Southern
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6inch (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
Factory-installed grab irons
Separately-applied ladders and brake equipment
Ultra-smooth rolling metal axles with 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24inch radius is recommended for operation.
Intermountain HO - Trailer Train HTTX
60 ft Wood Deck Flat Car
Features sharp paint and lettering, wire details, laser-cut wood decks, metal wheelsets and Kadee(R) couplers.
HO BiLevel Commuter Car - New Mexico Rail Runner - Set #1
Albuquerque
Includes: Cab: 1102 Coaches: 1008, 1012 (Series 4)
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO Duplex Sleeper - VIA Rail Canada #1129 / Elmora
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO 40Ft Wood Reefer - Canadian National #207011
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch
Spray Can - Neutral Gray (USAAF) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
HO 1976 Chevy Stepside Pickup - Tangier Orange
This pickup is perfect for North American street and highway scenes. This detailed truck features a die cast metal body, interior seats, window glazing and authentic decoration. Perfect for rural scenes or carting loads around town, this truck is a great addition to any 1970s and later layout scene.
Red LED (603 Size)
Wire - 13inches long
5-1/2in Long, Cut #2 Needle File - Square, Carded File (1pc)
Illuminator Lighting and Signal Decoder - Light-It - For Use with Woodland Just Plug Lighting System (5-pack)
Expand container traffic on your 1960s and 70s era HO layout with this series of authentic models from - SceneMaster, featuring:
- Standard end-door and right-side door versions as appropriate
- Authentic rivet, door latch and hinge details
- Colorful period schemes
- Perfect period loads for WalthersMainline G85 and 60ft Pullman-Standard VTTX container flatcars (each sold separately)
Athearn - HO RTR PS-2 2600 Covered Hopper - Missouri, Kanas & Texas #1326
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
HO EMD SD10 - DC/Silent - SOO Line #532
SOO Line --Conditional Announcement--
- Ex-MILW units / same features
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
N Scale Alco RS2 - DCC Factory-Installed Decoder - Canadian Pacific #8402
MODEL FEATURES:
Slow Speed Motor
Golden-White LED s
Directional lighting
Dual brass flywheels
Low-friction mechanism
Dynamic brakes
Factory-installed AccuMate magnetic knuckle couplers
Accurate painting and lettering
Product Information
This detailed Atlas Master Silver N Scale Alco RS2 diesel is a replica of the American Locomotive Companys versatile four-axle rod switcher introduced in late 1946. The successor to the popular RS1, the RS2 featured a rounded carbody, a cabside fuel filler cap and many upgrades. The most notable feature was its new 244 prime mover, which increased the horsepower to 1,500, a 500hp upgrade over the RS1. With the added horsepower, the RS2 was received well by railroads and just over 370 were constructed for the U.S. and Canada. They were used on general merchandise freight, coal trains coming back from the tipple and some were used in passenger service. This N Scale Alco RS2 features a slow-speed motor with dual flywheels, low-friction mechanism, directional golden-white LED lighting, a light board thats easily changed replaced with DCC decoder when you are ready, accurate decoration and AccuMate(R) magnetic knuckle couplers.
HO Bathtub Coal Gondola - Canadian Pacific (Ontario Hydro) #799777
Built: 10-79
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
Leaves - 1-3/4oz 50g -- Medium Green
Use this material to simulate individual leaves on trees or the ground around them. Scatter material is easily added to the layout using a sprayed-on matte medium/water or white glue/water mixture.
HO 1988 G43B Coil Svc. Gondola w/ Coil Racks (Coils Not Included) - Conrail (CR) #601833
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -1988 G43B Coil Svc.- With Coil Racks ? Coils Not Included in the now-classic Conrail red paint. This series represents the former PC-painted G43B series. Conrail maintained the lettering locations that PC did, painting the Conrail reporting marks, road number, and Conrail can opener logo in the same locations PC had stenciled them. The G43B prototype features cushion draft gear, giving the model a distinctive look compared to the other G43 classes. The top chord of the car has a -COIL STEEL LOADING ONLY- stencil to remind customers and railroad officers that the car is equipped with coil racks. Our model has coil racks too, and we sell beautifully executed steel coils for this car separately. We recommend a load of four coils if you want to replicate most prototype loading patterns ? for the size of coil we created. Yes, we did the math. These Conrail coil service gondolas are offered in 12 road numbers and feature details appropriate for these 1969-built cars.
HO 3600 Gallon Fuel Tank Set - EMD
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x4) .022In x .043In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 2 X 4 LUMBER SIZE IN HO SCALE
HO Greenville 86ft Double Plug Door Box Car - Wabash #55075
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: August 2021
Wabash -Original 1964- 1965+ Era is one of the many -classic- 1960s schemes seen on these cars, and represents one of the last schemes the railroad wore before being merged into the Norfolk and Western! This rolling billboard features Wabashs classy dark blue scheme with large Wabash lettering, and then undoubtedly the largest Wabash flag applied to any rolling stock, adorned with the -Follow the Flag- logo. Pure class. These cars were delivered in 1964 with full running boards but were soon modified in 1965. These significant modifications included the removal of the roof running board, the lowering of the brake wheel housing and removal of high grab irons and end ladders. Our Wabash model replicates this 1965+ look with exact features: an accurate 1964-built body, bolt -remnants- on the sides and ends of the model, and a roof with the old bolt locations of the running board supports! The features go on and on, including an accurate -lowered- Miner hand brake, 1965 replacement full-width Apex crossover platforms, 70T trucks with 33inch wheels, truck-mounted brake details and rotating Brenco-6 roller bearing caps. This stunning model is available in four numbers. (Please note there is no SKU 1/2 for this production).
1mm Static Grass - Winter Grass (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
HO RTR 68Ft Bulkhead Flatcar - Trailer Train TTPX #82063
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
HO 60ft Bulkhead Flatcar - CP Rail #316419
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
HO 60ft Flat Car - British Columbia Railway #1511
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO 53ft Railgon Gondola - Canadian National #188220
Product Information
A must-have model for any HO layout from the 1980s to the present, the WalthersMainline 53Ft Railgon Gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53Ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
A great addition to your HO freight car fleet, the models feature:
One time run of these roadnumbers, order now - limited quantity available
Based on Railgon 310000 series cars
Used in nationwide pool service from 1980 to the present - many later leased and relettered by new operators
Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
100-ton roller-bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Softcover, 96 Pages - Full Colour Pictures
Detailing and Upgrading Steam Locomotives from Kalmbach is a treasure trove of information about improving your steam power. The late steam and steam-to-diesel transition eras are very popular with model railroaders. This book is a single reference guide for upgrading, detailing, modifying, and maintaining steam locomotive models. This book includes an overview of steam locomotive types, histories and how they work. It also offers tips and techniques for upgrading and repowering older plastic and brass models as well as adding DCC and sound; weathering and modifying detailing to reflect various steam locomotives. Softcover, 96 Pages
HO Modern Downspouts w/ Small Overhang - pkg(6)
N Scale 3-Dome Tank Car - Ambrose Wine Inc.
These specialized cars were actually three complete tanks riding on one frame. They could be used to ship different types of petroleum products, such as gasoline, kerosene and home heating oil, or different grades of gasoline such as regular, super and premium to smaller customers from the 1920s to the 60s.
Colorful and completely assembled, the models feature body-mounted EZ-Mate II knuckle couplers.
DC/DCC/Sound - MLW FB-2 Canadian Pacific (script lettering) #4466
FB-2 and FPB-2 models feature:
Operating back up lights. As appropriate.
Roadname specific details with or without dynamic brakes. As appropriate.
The only HO scale Alco/MLW B unit with accurate phase details including vertical or horizontal battery box louvers and etched metal Farr or mesh side grilles.
Canadian or American cast Type B trucks. As appropriate.
Full underbody piping and conduit.
Correct roadname and manufacturer specific FB-2 and FPB-2 fuel tanks.
Canadian Pacific features:
Phase 2 body with horizontal battery box louvers and Farr grilles.
Dymanic brakes
CP fabricated water tank
Dofasco Type B trucks
HO New Look Bus Denver TramWays
Destination Sign:
20-Fitzsimons
Detail Variations:
Left-side Emergency Door
4-window exit door
Early-style engine door
Standee Windows
1 Inch Sanding Stick Cloth Back - Paper Sanding Strip Assortment (refill for 795-37752)
Includes 2 Each #37765, 37766, 37767, 37768 & 37769
HO Code 83 Nickel Silver - DCC Friendly - #4 Wye Turnout
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 83 rail!
Combining great looks and great performance in a complete system, each item comes fully assembled and features:
-Thin profile ties in realistic dark brown with enhanced wood grain detail
-Fine profile molded spike and tie plate details on each tie
-Spike-mounting holes positioned next to the rail
-Molded starter points on underside of ties for fasteners
-Custom formulated nickel silver rail for outstanding electrical conductivity
In addition to these details, each DCC-friendly Code 83 Turnout features:
-Snap-action points
-Solid rail points for better conductivity
-Isolated frogs with built-in jumper for powering as desired
-Current jumpers entering and leaving the frogs
-Insulated tie bar
HO GE U25B Low Hood - DCC & Sound - New Haven #2500
The HO scale U25B Locomotive features:
Phase I, II & III units represented in 1st run. (Phase IV & other units will come with future runs)
Single-window style for low nose units. (Double-window in future runs)
Both low- & high-short hood versions
Early high- & later low-style side doors.
Road specific details for each model
Working step lights on low-short hood models
Different roadname-specific exhaust stacks
Roadname-specific battery box doors on engineers side
Roadname-specific air cleaner boxes on rear
Working inspection lights on all units
Lighted control stand inside cab
Different types of fuel & air tanks, as appropriate
Russell Snowplow - Ready to Run - Penn Central #60007 (yellow, black)
Product Information
Take on winters worst with a WalthersProto Russell Snowplow on the job! In service since the 1920s, all-steel plows like this are a must have for railroads big and small, and look great spotted on a siding or near the engine shed during the warmer months too! Completely retooled and superbly detailed, each HO Scale model features:
Limited edition - one time run of these roadnumbers!
Prototypes in service 1920s to present
Fully-assembled, railroad ready - undecorated kit also available
Factory-installed grab irons
Complete underbody w/brake gear & piping
Custom front truck for tighter curves
Detailed flanger
Thin profile stirrups
Window -glass-
Ultra-Smooth rolling metal axles and 33inch wheelsets
Proto MAX(TM) metal knuckle coupler on rear of plow
Railroad-Specific Details:
See-through -steel- or original -wood- running boards
Sturdy hinged & positionable side wings in two styles w/wire cross braces
Fitted w/original or one of three styles of late headlights as appropriate
Bettendorf or roller bearing rear truck
O (1:48) Custom Straight Staircase (1pc)
Use in interior applications where a closed casing is desired. Combine with other staircases to achieve many configurations. Precision Injection Molded in Styrene Plastic. ASSEMBLY REQUIRED
SCALE
O
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
9/64In
HEIGHT IN MM
3.6mm
WIDTH IN INCHES
57/64In
WIDTH IN MM
22.6mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
3-3/4In
LENGTH IN MM
95mm
N Scale Kaolin Tank Car - ACFX #78920
Features:
100-ton roller-bearing trucks
Separate safety bars
Accurate painting and lettering
AccuMate couplers
AccuMate couplers are made under license from AccuRail, Inc
Limestone Ballast - Matches Unitrack Roadbed - 7oz (200g)
Ballast is made from real pulverized limestone and matches Unitrack System roadbed.
Trackside Around Canada with Matthew Herson
By: John Riddell
Released: November 1, 2020
Tour railway scenes across Canada from 1957 to 1984 via 250 color images from Newfoundland to Vancouver Island and the Yukon Territory! Featured views include the last narrow gauge railway operations in Newfoundland, steam excursions on the CP and CN, electric commuter operations around Montreal, early GO train commuter operations around Toronto, Northern Alberta freight operations near Peace River, CN operations in the Fraser River canyon, logging operations on Vancouver Island, and White Pass shovel-nosed diesels in the Yukon!
40Ft Corrugated Container OOCL 2pk
OOLU 766673(3) OOLU 769885(8)
5/32In Fluorescent Red Rod (5pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Red
HEIGHT IN INCHES
5/32In
HEIGHT IN MM
4.0mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
HO Enterprise 2-Bay Covered Hopper - Canadian National (Red Noodle) #350005
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO Jordan Spreader - Wisconsin Central #310
FEATURES:
- One-time run of these road numbers, order now, limited quantity available
- Factory-installed grab irons
- Positionable wings and moldboards can be raised and lowered
- Built tough with durable metal hinges and other details
- Complete underbody with brake gear and piping
- Thin profile stirrups
- Cab window glass
- Railroad-specific details:
- Horizontal or vertical air reservoir
- Original or one of 3 later headlight styles as appropriate
- 70-ton roller bearing or Bettendorf trucks as appropriate
- Single-chime air horn placement
- Ultra-smooth rolling metal axles and 33 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Gunderson 6276 50Ft Plate F Boxcar - COER #173345
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Illinois Central Gulf Rack / Trailer-Train Flatcar TTBX #965515
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO ACF 5250 4-Bay Covered Hopper - ARCO Polymers (NDYX) #83
Features:
Ready to run
Injection molded plastic
Fine scale detail
Etched metal roof walk
Metal knuckle couplers
Road specific hatch and outlet configurations
Road specific roof walk variations
Three body style variations
Separately applied wire grab irons and wire brake lines
Crisp painting/printing
Free-rolling 100-ton trucks
HO Gunderson 6276 50Ft Plate F Boxcar - AOK #115003
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
Tangent Scale Models PS4750 Covered Hopper- MKT- Original 12-1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
MKT Original 12-1979 in the eye-catching green scheme with the large yellow MKT painted on the flanks of the car. Like our BN models, the Tangent PS4750 is the only model on the market to match MKTs one and only order of PS4750s, from the jacking pads, brake system, roof hatches, etc. Check out the prototypical Ellcon-National Peacock D-1600 hand brake and the Brenco-3 style rotating roller bearing caps!
HO Enterprise 2-Bay Covered Hopper - GFCX #110
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO U30C Phase 1 - Gold - DCC & Sound - Chessie System (C&O) #3301
MASTER MODEL FEATURES:
Adirondack floating bolster trucks with or without bearing caps as appropriate per railroad
Coupler pocket designed to accept AccuMate Proto-couplers
Golden-white LEDs
Antenna detail where appropriate per road name
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Directional lighting
With or without nose headlight as appropriate per railroad
Non-operating cab roof-top beacon detail where appropriate per road name
Detailed crew members
Marker lights with separate lenses
Snowplow
Separately-applied drop steps
Recommended radius: 22inch
ANALOG (DC) OPERATION FEATURES:
Please note that the Atlas Quantum Engineer will NOT operate an Atlas Gold Series locomotive equipped with a LokSound Select decoder on an analog (DC) layout. However, the sound and lighting functions of the LokSound Select decoder in the Atlas Gold Series U30C locomotive can be controlled by an easy-to-use basic DCC system
Also note that on a DC-powered layout, a DCC and sound equipped locomotive (such as the Atlas Gold Series U30C) CANNOT be consisted with another locomotive that does not
also have both DCC and sound. (This statement does NOT apply to DCC-equipped locomotives operating on a DCC layout.
Sound Functionality Features (Gold Models with ESU Sound Only ):
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals. Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided for true realism.
DCC OPERATION FEATURES:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
A total of six DCC function outputs are available
Follows all NMRA DCC standards and recommended practices.
Note: Due to the higher starting voltage required to operate the sound system, it is not possible to MU a non-sound-equipped loco in DC (analog) mode
Cast Resin Freight Car Load - 120-Ton Ships Driveshaft Bearing - 6-1/4 Inches Long
New Freight Car Loads From Chooch!!
Ready-to-use freight car loads are just the thing for adding realism to your layout scenes and freight car fleet. Chooch cast-resin loads are patterned after typical industrial machinery and appliances shipped by rail. Each comes completely decorated for added authenticity. These new loads are available in multiple sizes; large loads are usable in HO, S, and O Scales, small loads are good for HO and N freight cars and scenes. Mid-sized pieces are ideal for HO, but some may be suitable for larger or smaller scales.
Spray Can - Mica Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Trinity 3-Bay Hopper - AGPX (3pk) #1
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Alco FA-1 & FB-1 Set - DCC & Sound - Erie #725C, 725D
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO DC Powered Switch Machine - Right Hand
Use these DC Turnout Machines to convert manual turnouts (#381-2841, sold separately) to electrical operation.
HO 50Ft PCF B70 Boxcar - w/ Superior Doors - Canadian National (6 pkg)
Includes Road Numbers:
555004, 555007, 555016, 555061, 555070, 555087
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
PSC Transfer Van - Canadian National #76568
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
HO 40ft Corrugated LC Container - Hanjin #2 (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered
X-2 Mini Acrylic - White - 10mL Bottle
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or airbrushing. These paints can be used on styrene resins, Styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.
When airbrushing be certain to use any of the following Tamiya thinners: Items-81020, 81030, 81040, 81520, 87077.
Tamiya bottle paint label meanings and quick tips:
- X appointed colors have a glossy finish while XF designated colors are flat finish.
- The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
- Items 81521 and 81021 (Tamiya X-21 Flat Base) can be used as a flattening agent on Tamiya Gloss bottle paints. Simply add any X-gloss color then add flat base. Mixing ratio: 1:1
- The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
- For better paint brushing results use Tamiya Paint Retarder (item 87114) for a smoother brushstroke free finish.
CP Piggyback Trailer - Unpainted and Resin Cast Kit
Dirt & Rust Weathering Powder Set - 1 each Delta Dirt, Dry Mud and Medium Rust
HO SD38 - DCC Ready - DT&I #250
DTI FEATURES:
Later rebuild with large paper air filter box version. Please note: due to strobe location, it will be included in a poly bag with LED. Models come with M3 horn, spark arrestors, rear brake wheel, smaller fuel tank, nose mounted bell.
ROAD NUMBER SPECIFIC FEATURES:
#250
- Unique weathered version with peeling paint effect.
- Large-can style spark arrestors
- all-weather window
#251
- Y-style spark arrestors
- all weather window
- Moved DT&I art on the long hood
#254
- Y-style spark arrestors
- all weather window
- Extended walkway on the conductors side
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
7/32 inch OD Round Brass Tube - 0.029inch Thick x 12inch Long
Round Brass Tube (1 pc)
Outside Diameter: 7/32 inch
HO SD70M - DCC & Sound - EMDX/Maroon/Black #7024
Detailed Information
EMDX FEATURES:
Solid maroon/black scheme
Large EMD front plow
Round EMD style front ditch lights
Can-style roof antenna
Early EMD trucks with hidden bearings
During 1995, EMD built 22 SD70Ms for their lease fleet, including 3 official demonstrators built in 1992. Painted in 2 schemes (solid EMD maroon and black, and maroon, grey and silver), EMD was able to provide many different railroads to test and compare their new 710 prime mover to other current models. These could be seen all over the US and added a splash of color when mixed in locomotive consists. By the early 2000s, they were sold to CSX and eventually painted into CSX colors.
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OAKX #31
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO 60ft PS Flatcar - Trailer Train/OTTX #90188
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
4785 PS2-CD Covered Hopper - Late End Frame - MKT #9150
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) #653077
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO Bags of Sand, Grain & Cement (40pk)
- Perfect loading dock detail
- Molded in tan plastic
- Models shown painted (paint not included) with wood pallets #949-4129 (sold separately)
HO GP38-2 - DCC & Sound - Helm Leasing (HLCX) #3812
Detailed Information
HLCX FEATURES:
Ex Texas Mexican Railway
3800 gallon Fuel tank
Blomberg B trucks
Front ditch lights
Front small EMD plow
Firecracker antenna
Helm Leasing is a large locomotive leasing outfit known for providing reliable power to railroads for short term and long term contracts. Many were painted into this very attractive scheme and could be found in service on just about any railroad.
ROAD NUMBER SPECIFIC FEATURES:
#3812
Ex TM #863
Mid/Late phase body
All-weather window
Leslie 3-chime horn
#3814
Ex TM #867
Late phase body
Q-style radiator fans
Nathan P5 horn
Angled blower housing
All- weather window
GP38-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23020
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX (6 pkg) #16
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
15306
15354
15392
15429
15433
15452
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Hy-Rail Guide Wheels
Converts Trident Chevy Pickup, Suburban or Blazer (each sold separately) to railroad inspection/repair vehicle. Includes front and rear hy-rail wheels, toolbox and welding tanks; may be adapted to other HO Scale models.
HO EMD FT A+B Set - DC/DCC/Sound - Boston & Maine (B&M Maroon Scheme) #4206A + 4206B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
Spray Can - Metallic Red (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 60ft Bulkhead Flatcar - CLC #1209
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
Drill Bit #63 - 0.037inch Diameter (2 pkg)
Product Information
Walthers Drill Bits are the right tools for all kinds of hobby projects, from detailing locomotives and cars, to scratchbuilding, wiring and more. Theres a full range of common wire gauge - jewelers drill bit sizes from number 80 to 43, and each pack includes two ready-to-use bits. Walthers miniature hardware is a complete range of ready-to-use parts and tools for hobby projects, including wood, machine and nylon insulating screws, plus appropriate hex nuts and washers, in assorted standard sizes (machine and wood screws may be brass or brass plated). Drill Bits are part of the line of Walthers miniature hardware and tools.
A unique Streaking Grime effect specifically designed for vehicles painted in a tri-color camouflage scheme like those used by NATO but can be used in any vehicle. Create realistic streaks and rainmarks with this light colored enamel effect. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from lower parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.
Kenworth T680 Sleeper-Cab Tractor - 53ft Dry Van Trailer - Celadon
Tangent Scale Models HO V5 PS4750 Covered Hopper CNW Ex-ROCK Blue w/ Black CNW
CNW Ex- ROCK -Blue w/ black CNW- V4 is a second banditized ROCK scheme variation. After the ROCK bankruptcy, CNW and other railroads assumed ownership of former ROCK freight cars, including this series of PS4750s. We have represented some aging of the car body color with faded blue paint. For this version, the large R and The Rock and the reporting mark/number have been painted out. A black CNW herald has been added to the upper right corner of the car, just like the prototype.
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
HO Scale Identical Trash Cans - 10pkg
Set of 10 Trash Cans - all metal casting. All cans are identical with each measuring roughly 0.3 inches tall by 0.18 inches wide.
Columbia Feed Mill
Great Trackside Business for Rural Areas
Perfect for Steam, Diesel & Modern Layouts
Detailed Brickwork & Gambrel Roof
Two-Story Clapboard Storage Building
Fits Straight or Curved Sidings
Two Concrete Loading Docks
Canopied Truck Dock
Decal Signs
Molded in Four Colors & Clear Plastic
Gambrel-roofed brick feed mills like Columbia Feeds were once common all across the continent, grinding grain grown locally, or shipped in by the boxcar load, into animal feed, then bagged and reloaded into customers wagons or trucks. For additional storage, owners often had attached or freestanding buildings that conformed to the curvature of their siding or size and angle of their property.
Mill 18.4 by 14.3 by 14cm
Storage Building 15.2 by 10.2 by 10.2cm
HO EMD GP40 - DCC Ready - RF&P (Blue and Grey) #125
1982+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Aerosol Spray Paint Can - Flat Cote Spray - 4.5oz (135mL)
Tru-Color Aerosol Spray Paint is ideal for painting any model when you dont have an airbrush. This solvent-based acrylic paint is great for weathering and wide-are coverage. Available in railroad and weathering colors, Tru-Color spray paint comes in spray cans as well as in liquid colors designed for brush or airbrushing.
HO Scale Cork Crossing - 25/30 Degrees
Product Information
One-piece cork roadbed turnout sections provide a smooth transition between turnouts and track. Each section is 3/16inch 5mm thick with beveled edges. Color and profile match other popular brands of roadbed. Works with all HO Scale track.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - RSGX #4336
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - TROX #3521
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Union Pacific Harriman #9004
Built new in 1955 by American Car & Foundry, UP 9004 was set aside for special assignments in 1974. In 1987, the car was named Harriman in honor of Edward Harriman and his sons Averell and Roland, who all served as Directors of the company. From 1989 to 1990, the car was named Sun Valley.
Tsunami2 Digital Sound Decoder - 21-Pin NEM form factor - EMD Diesel Locomotives
Dimensions: 30.5 x 15.5 x 6.5mm
Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output)
Function Outputs: 8
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
The NEW TSU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more!
The TSU-21PNEM8 can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches.
HO GP50 - DCC & Sound - Chicago & North Western #5082
Detailed Information
CNW FEATURES:
Phase I Body
Nose-mounted -Gong- Bell
Winerization Hatch
Small EMD plow
Leslie 3-chime horn
Sinclair antenna
Western Cullen style beacon (Operational in DCC)
Originally purchased for fast TOFC freights, these units were used in many different applications before being absorbed into the UP merger.
GP50 LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Walkway tread
Lift rings
Sander lines
Windshield wipers
McHenry scale knuckle couplers - Kadee compatible
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
ITLA ScaleModels Inc HO 4170 Albany Manufacturing Co
The HO scale Albany Manufacturing Co. kit features unique laser etchings on all wall surfaces that can be highlighted with hand brushed acrylic paint to become significant weathered and eroding surfaces.
Finely etched details such as exposed Rebar and weathered masonry...
This kit also features the following...
A configurable footprint ... build it into a 4-walled structure 3in L x 3in W x 3.5in H
OR a Shallow Relief format 12in L x 0.5in W x 3.5in H
Separate Window Headers & Sills allow for easy painting
A Colour Sign Sheet includes Albany Mfg Co. name and many wall posters
Multiple Roof Top and Wall details included ...
Dual Snorkel Vents
Roof Access Hatch
Laser etched Brick Chimney
Wall Venting and Exhaust Ducting
Loading Dock Awning, Corrugated Skirting, Pallets, Access Ladder
Electrical Meter, Junction Boxes, Conduit, Coal Door and Fire Hose connections
Finely cut 2nd Floor Exit Platform and Access Ladder
Access Steps/Staircase/Railings
This kit is easily painted with basic matte spray paints and simple water based acrylics
HO Highway Reefer Unit w/Diesel Fuel Tank - Plastic
N Scenic Accent Figures - Children
HO SD70M - DCC Ready - Lake State Railway LSRC #6432
Detailed Information
LSRC FEATURES:
Ex-UP
Small EMD front plow
Round front deck mounted ditch lights
PTC antenna array
Late EMD trucks with exposed bearings
The Lake State Railway operates 375 miles of track and is based out of Saginaw, Michigan. They recently purchased a small batch of Ex-UP SD70Ms painted into their bright new livery. The 2 numbers we are offering were the first to be repainted and often ran together in consist.
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO Two City Sidewalk Newsstands - Kit
Product Information
Whether offering magazines to train riders or newspapers downtown businessmen the Walthers Cornerstone HO Scale Newsstands look great in a variety of settings in any era. The kit has parts for two different news kiosks and includes detailed printed graphics of newspapers, magazines, candy displays and signs to add realism in any scene. Use the Newsstands at train stations, airports, ferry landings or along bustling streets in downtown to add interest to your layout scenes. The Newsstands kit will look great on your layout among other Cornerstone HO Scale businesses.
Builds two separate newsstands
Fits steam or diesel-era scenes
Easy-to-build plastic kit
The Newsstand structures measure:
Angled-front stand: 2-1/4 x 1-1/8 x 2-1/4inch (5.7 x 2.8 x 5.7cm)
Rectangular stand: 3-1/8 x 1-1/8 x 1-1/4inch (7.9 x 2.8 x 3.1cm)
HO 40ft ACF Welded Boxcar w/8ft Youngstown Door - Erie Lackawanna #55844
Create authentic freights for your diesel-era layout with the Walthers Mainline 40ft American Car and Foundry Welded Boxcar with 8ft Door! Introduced in the late 1950s, the wider door opening was popular with shippers and receivers, allowing fast and easy access for forklifts.
Serving into the 1980s, these layout-ready models feature:
-Limited edition - one time run of these road numbers!
-Prototypes in general freight service from late 1950s to 1980s and beyond
-Detailed 10-panel body
-8ft Youngstown doors
-Late Stanray 4/4 improved Dreadnaught ends
-Stanray diagonal panel roof
-Apex see-through steel running boards
-Correct 33in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
106 Plastic-Compatible Grease with PTFE
Labelle grease with PTFE--
Just a -dab- will work wonders, put a -dab- on the exposed gear box and run a minute or so, then add another -dab- and it will work its way throughout the gear box and worm gear.
Additional Suggested Uses:
Model Trains: Exposed or Enclosed Gear Boxes (all scales)
RC Models. Exposed or Enclosed gear boxes on all RC models of all sizes and type. Shock Absorbers
Slot Cars: Exposed or Enclosed gear boxes on Slot Cars of all Sizes
Bicycles: Enclosed cable rub points, gears.
Fishing Reel mechanisms
Other uses: Enclosed gear boxes on all sorts of Household items, squeaky door hinges, Riding toys, mechanical toys of all types.
--PTFE has been called -the slickest substance known to man- is is the parent chemical of -Teflon- which is registered trademark of Dupont Chemicals.
Enamel Product.
A new high quality enamel product, developed for scale aircraft models, with an improved flow for easy creation of depth and emphasis of surface detail. Forget complex mixes or infinity of colors.
This product is perfectly suitable for aircraft models which are painted in green or brown schemes, or carrying camouflage patterns composed of both of these colors.
Model Railroad Reference Book - 2024 - 2025 Edition
Get your modeling projects on track with a copy of the 2024-2025 Model Railroad Reference Book! Now in stock, order yours now!
Updated from cover to cover, you will find the latest new product announcements, information and updated listings for hundreds of products in HO, N and Z Scales. Packed with modeling tips, ideas and inspiration in one handy resource, be sure you have copies for your modeling library and your workbench too!
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
N Scale 60ft Coach Car - Toronto, Hamilton, & Buffalo #71
FEATURES:
- Based upon C&NW and CNJ prototypes
- Full scale dimensions and details
- All cars include separately applied window glazing, diaphragms and roof vents
- Observation car includes separately applied end railing details and a drumhead
- Detailed interiors (excluding baggage car)
- AccuMate operating knuckle couplers
2-11/32 inch Vertical Railing (2pcs)
Use for hand rails, stair rails, roof trusses, grating and other steel structures. Precision Injection Molded in Styrene Plastic. May also be used for trellises, fencing window bars, etc.
SCALE
ALL
MATERIAL
STYRENE
COLOR
VARIOUS
HEIGHT IN INCHES
2-11/32
HEIGHT IN MM
59.5mm
WIDTH IN INCHES
1/4
WIDTH IN MM
6.4mm
THICKNESS IN INCHES
.085
THICKNESSS IN MM
2.2mm
LENGTH IN INCHES
5
LENGTH IN MM
125mm
Microscale 87948 - HO Canadian National - GP7 and GP9 Hood Diesels (1953-1961)
HO 5820 Covered Hopper - Procor/UNPX (Union Carbide) #122044
Era: November 1977+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
Evergreen Scale Models - Opaque White Polystyrene H-Column .188In x 14In (3 pcs pkg)
HO RTR 55 F-100 Panel Truck - Midtown
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
GLa 2-Bay Hopper: PRR Circle Keystone #154021
Detail Variations:
Single car
As operated from 1934 to 1954
Features:
All-new tooling
Scaled from original blueprints
Die cast frame and floor for optimum weight
Full interior rivet and bracing details
Factory installed wire grab irons
K- or AB-brake gear installed as appropriate
Factory installed Kadee #158 couplers in narrow draft gear box
Turned metal wheels in correct PRR 12D-F8 trucks
Accurate paint and lettering
Multiple road numbers available for each paint scheme and railroad
Evergreen Scale Models - Opaque White Polystyrene N Scale Freight Car Siding .020In x 6In x 12In (1 sheet pkg)
Spray Can - Yellow (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Tangent Scale Models HO PS4750 Covered Hopper ROCK -Delivery Blue 6-1978
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ROCK -Delivery Blue 6-1978- is available in the Blue Original 1978 scheme. Our -R- black and white logo and blue color is stunningly executed, check it out for yourself. ROCK lettering done right is something to behold, with accurate data stencil breaks and careful duplication of ROCKs data style. This is Tangent-accurate hand-drawn artwork. We have also matched the 1978 ROCK details including body-mounted brake center sill linkage, Miner outlet gates, a Universal hand brake and matching Universal brake wheel.
Mica Red Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO Bi-Level Auto Rack - Norfolk Southern/TTGX Flat Car #962038
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO ACF 4600 3-Bay Centerflow Hopper - Grand Trunk (3 pkg) #1
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- Canadian Pacific
Trailer Train 60ft Pullman-Standard bulkhead flatcar #304670
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO GP9RM - DCC Ready - Canadian National (Stripes) #4101
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO Scale Whisker Metal Couplers & Scale Gearboxes - Medium (9/32in) Centerset Shank (2pair)
The #178 Kadee Magne-Matic Coupler features a Scale Metal Whisker Coupler (a smaller head coupler which is more to scale and is patterned after the type E couplers), insulated Scale Draft Gear Box and Lid with rear and center screw holes for mounting.
2-56 screws are the most commonly used for center hole.
0-48 or 0-80 screws are used for rear hole.
Screw length will very depending on the mounting situation.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.
Package Includes:
(2) Pair #178 Scale Whisker Metal Couplers - Medium Centerset Shank
(2) Pair #178 Scale Snap-Together Gearboxes and lids
(2) #625 Knuckle Springs
HO SD60E - DCC Ready - Norfolk Southern NS #9-1-1
Detailed Information
NS 9-1-1 FEATURES:
3900 gallon EMD fuel tank
Cab mounted PTC antenna array
NS designed snow plow
Horse head style blower duct kick plate
Different cab panel louver arrangement per prototype
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
LED lighting including:
Headlights
Illuminated deck mounted ditchlights front and rear
Numberboards
Ground lights above front trucks
Long hood mounted Nathan 5-chime air horn
Sunshades
Rounded or rectangular cab windows per prototype
Flexible rubber multiple unit (MU) hoses with silver glad hands
Flexible rubber front and rear trainline air hose with silver glad hands
Step wells feature seperately applied individual see through photo-etch steps
Coupler cut levers with loops
Anticlimbers
Safety tread on the walkways
Anti-glare panel painted on the nose
Factory applied photo-etch windshield wipers & lift rings
See through and tinted cab windows
Detailed and painted cab interior with control stand, display screens, detailed crew seats
See-through radiator fans
Factory installed wire grab irons
Fine-scale handrails for scale appearance
Underframe mounted E-bell
HT-C trucks with Timken bearings
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
McHenry scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Recommended radius: 22inch
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Frame mounted 1inch high fidelity premium speaker
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
N Scale Just Plug Lighted Vehicle - Green Pickup
This little pickup still has a few thousand miles left and is up for anything!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic. Add a vehicle to a Just Plug light hub for easy installation. Just plug and you are done!
20mA per Vehicle
HO Bearing Caps - Axle - pkg(4)
HO Scale 89ft Channel Side Flatcar - Trailer-Train/KTTX #155252
(yellow, black; Twin 45ft)
Built especially for the bigger trailers entering service in the 1960s, this Walthers Mainline model of the 89ft channel side flatcar is a must for period intermodal modeling in HO scale. Based on the F89F flatcars owned by Trailer Train and many railroads, over the years these cars carried 28, 40, 45, 48, and 53ft trailers.
FEATURES INCLUDE:
- One time run of these road-numbers, limited quantity available!
- Heavy die-cast metal underframe for great performance empty or loaded
- Used in piggyback and other service 1963 to the present
- Prototypical C-shaped steel channel side sills
- Detailed brake gear
- Swinging coupler pocket for 18 inch radius curves
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23012
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.156 (8pcs pkg)
N Scale FM H-24-66 Phase 2 Trainmaster - Gold DCC & Sound - Canadian Pacific (Late) #8911
Features:
Ends with large number boards and a single headlight
Golden-white LEDs
Directional lighting
Painted safety rails
Etched metal grilles
Blackened metal wheels
Factory-installed AccuMate magnetic knuckle couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
Follows all NMRA DCC standards and recommended practices.
ESU LokSound Features (GOLD LOCOMOTIVES ONLY):
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are up to 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided for true realism.
AccuMate couplers are made under license from AccuRail, Inc
HO RTR SD39 - DCC & Sound - Guilford/Boston & Maine #692
This locomotive is Primed-for-Grime!
BM FEATURES:
Built as Illinois Terminal, these SD39s were purchased by the NW before going to the Guilford. Our models represent the time period before they were painted into Guilford grey and orange. These well worn black painted units still retained their as-built features such as: battery box-mounted -gong- bell, smaller fuel tank, non DB hatch, and hi-mounted brake cylinder trucks. #690 features a very faded -Norfolk Western- lettering on the long hood.
SD39 SERIES LOCOMOTIVE FEATURES:
Separately applied air tanks
Coupler cut levers
Rubber MU hoses
Photo-etch stainless steel windshield wipers
Fine scale handrails
Non-sound version features 21-pin NEM DCC plug
See-through dynamic brake and radiator fans
Curved radiator fan grab iron
Exhaust stack
Frame-mounted bell (unless noted)
Detailed 4000 gallon fuel tank (unless different capacity is noted)
Flexicoil-C trucks with high or low brake cylinders (per prototype)
McHenry scale knuckle spring couplers
See-through cab windows
Bi-directional LED lighting
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Painted and printed for realistic decoration
Highly-detailed, injection molded body
Minimum radius: 18inch
Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard Econami sound decoder by Soundtraxx
Engine startup sound sequence
Dynamic brake sound or Non-Dynamic Straight to idle on F4
Extra prime mover and horn sounds exclusive to Athearn
Sounds recorded from a real EMD 12-645E3
Multiple bell sound files user configurable via Configuration Value (CV)
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Current Keeper ready with on board expansion plug
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via CV changes
N Code 70 Bridge Flex Track
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- Trailer Train with B&O Bulkhead #92270
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO SD38 - DCC/Sound - CanDo Rail Services #5201
CCGX FEATURES:
CanDo Rail Services is a contracting company based out of Brandon, Manitoba, Canada. They preform track maintenance for large industries, operates as a shortline, and contracts switching services in Ontario, Manitoba, and Alberta Canada.
ROAD NUMBER SPECIFIC FEATURES:
#5201
- Ex: DMIR. Short fuel tank
- triple clasp brakes
- M3 horn
- UP style plows
- all-weather windows
- ditch lights on both ends
- Classified as a SD38AC
#5202
- Ex-BLE. Medium fuel tank
- high-mount truck brakes
- M3 horn
- UP style plows
- all-weather window
- ditch lights on both ends
- Classified as a SD38AC
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO - Nathan K5LA 5-Chime Air Horn w/Shields - Lost Wax Brass Casting
HO 53ft Railgon Gondola - CSX #484523
(black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO SP C-40-3 Steel Cupola Caboose - Sierra Railroad #8
1970+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
HO Scale Switch Motor - 2pkg
HO EMD GP40 - DCC & Sound - Union Pacific #594
1997+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO Code 100 Flex-Track - Non-Weathered (6pcs) (18ft)
Flex-Track features scale size ties, tie plates and spikes, irregular tie spacing, natural brown tie color and nickel-silver rail. 6pcs, 3ft lengths.
HO EMD GP40R - DCC Ready - Illinois Central #3137
Mid 90s
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Plastruct 91883 Red Brick Patterned Plastic Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
7-1/2 x 10
HO 60ft Hi-Cube Plate F Boxcar - TTX/TOBX #889003
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline(R) 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Tangent Scale Models HO Detroit, Toledo & Ironton (DTI) Greenville 86t Double Plug Door Box Car
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low profile? Barber S-2-A with Timken rotating caps
Wheels: CNC-Machined 36in Wheels
Detroit Toledo & Ironton (DTI) Delivery 1970 Magenta shows off one of the most-requested paint schemes for the Tangent Greenville 86ft Box Car System. We appreciate the patience of DT&I modelers, as we wanted to get this car right with the correct 1970 Greenville body with accurate DT&I Magenta paint and lettering. This Magenta DT&I group totaled 54 cars ? It was also the first group to be delivered for use in the new Ford Brownstown Parts Distribution facility pool. Yes, these cars were pooled, so that means these beautiful Magenta 86ft giants served Ford US Parts Depots coast to coast in the Ford BRO pool lanes. Note the prototype photo on our website that shows a DT&I BRO car behind a GN painted, BN-restenciled SD45 presumably photographed on BN headed to Seattle. The DT&I cars feature the distinctive Brownstown body style, with extra vertical rivet rows at the ends of the side sheets. An accurate End-Of-Car Cushioning underframe shows off the 100-Ton Low profile Barber S-2-A trucks, 36in wheels and Timken rotating caps.
Power Cab DCC Starter System - 2 Amps
An entire DCC system in the palm of your hand! The Power Cab system can operate one or two HO locomotives. Installation is a snap. Hook two wires to your track and plug in the cab. Then you are off and running trains!
The Power Cab kit contains:
- Power Cab
- 7ft Power Cab Cable
- PCP Power Panel
- Power Supply
- Pro Cab Coiled Cord
- Manual
The Power Cab represents an Entry Level starter system for small layouts but has all the same features as the high end 5 amp PH-Pro. Its limitations are found in the number of expansion options it can connect to and support.
The PowerCab is well-liked because it is a full featured NCE DCC system with a true programming track output capability designed to handle Sound Decoders without any programming issues. Some people with a 5 and 10 amp PH-Pro system purchase a Power Cab system for the full programming track capability and to add an additional throttle for the layout.
The Power Cab offers the best Programming Track capability of all the NCE systems. It offers a safe low current programming track output mode where it is safe to test decoders. At the same time, the programming track current from the Power Cab has been raised enough to accommodate the special needs of sound decoders which can have problems working properly with older style programming track outputs. No 3rd party programming track booster is required when using a Power Cab.
Up to 256 turnouts can be DCC controlled using DCC accessory turnout decoders. They can be controlled from the PowerCab throttle or any NCE throttle with an accessory control button.
The Power Cab allows you to add up to 3 NCE cab bus based accessory devices to the system using 3 special cab addresses. This does NOT take away from the number of throttles [6] you can use with the Power Cab system.
HO RTR 68Ft Railgon Gondola - Railgon GNTX #290009
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
Tru Color Paint - Acrylic - C&O/ B&O Blue - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 68Ft Flatcar - TTX (Forward Thinking) #80643
Features:
Side stake pockets
Simulated tie-loops
Fishbelly center-sill
Prototypical pull-plates and lift rings
Bi-Level Auto Racks - Canadian National - White w/Red Logo #9258
All are Ready-to-Run.
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene-
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage.
HO Ultimate Soda Jerk Detail Set - Decorated
N Scale 56Ft General-Service Tank Car - General American Transportation (Soy Power GATX) #30833
Product Information
Built for General American Transportation Corporation in 2007, this 25,000 gallon 56Ft general service tank car with Barber Roller Bearing trucks was leased to the Renewable Energy Group for biodiesel transportation. General American Transportation Corporation, now known simply as GATX, is a large railcar leasing company, with over 122,000 railcars in the fleet.
This ready-to-run N Scale 56Ft General Service Tank Car from Micro-Trains(R) is based on common cars built beginning in the 1970s and in service into the 2020s and beyond. This tank car is an ideal addition to your diesel-era freight consist. This car features free-rolling Delrin(R) trucks with contoured axles, truck-mounted Magne-Matic(R) couplers and die cast metal underframe or interior weights. This 56Ft General Service Tank Car is one of many Micro-Trains N Scale freight cars.
Dry Brown
Woodland Scenics Field System Briar Patch makes it simple to model brambles, thickets and shrubbery. Use straight out of the package to add shrubs to any scene.
HO 4900 Dump Truck w/Snowplow & Salt Spreader
Product Information
Licensed replica of popular International trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled and painted
Die-cast metal and plastic parts
This medium-duty truck line was introduced in the late 1980s. Powered by a Navistar DT inline six-cylinder diesel engine capable of up to 350 horsepower, the 4900 series has been a great starting point for a wide range of commercial vehicles, including delivery vans, single- and dual-axle semi tractors, as well as fire apparatus and other government applications.
INTERNATIONAL(R) and other International Truck trademarks are licensed by International Truck Intellectual Property Company, LLC.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Lackawanna (DL&W Phoebe Show) #51212
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Cardboard Cut - Quarrystone
The embossed Wall Sheets with photorealistic wall motifs are ideal for creating walls by mountains and rocks, town centres, tunnel entrances, and much more. The ?Ashlar? stones make old buildings, train stations and even garden enclosures even more detailed.
The Wall Sheet ?Ashlar?, Extra Long is perfectly suited to being used for H0 and TT gauge.
Product benefits:
Realistic appearance thanks to photorealistic wall motifs
Structured surfaces, as Wall Sheets are made of embossed cardboard
Easy processing: cut to size with scissors and glue on
Available in two lengths
HO Scale NSC 73Ft Centerbeam Flatcar - Trailer Train (TTZX) #861241
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
HO AutoFlood III RD Coal Hopper - GLFX #8116
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO Intermountain 4-Panel Coalporter, Canadian National
CNA Website scheme
Features:
Sharp Painting and Lettering
Prototype Accurate Paint Schemes
Multiple Road Numbers
InterMountain 100 Ton Trucks with 36in Metal Wheelsets
Metal Knuckle Couplers
HO Chemical Tankcar - Staley #4917
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Wireform safety handrails
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 15inch
N Scale Code 55 Streamline Electrofrog #8 Turnout - Long 36inch Radius - Right Hand Turnout
Product Information
12inch radius diverging route.
Peco Universal Fine track has a fine scale appearance. Rail is Code 55 above the ties, but the clever double base adds strength and maintains compatibility with Peco Code 80 track system components. Code 55 turnouts are not direct replacements for Code 80 components as the geometry is slightly different. Turnouts include extra tie sections for placement under the rails once the track has been fitted onto the layout.
Peco Electrofrog turnouts feature electrically live frogs to enhance slow-speed performance. They require that power always be fed from the points end of the turnout.
All Peco turnouts are power-routing, meaning that only the route the points are lined for are electrically live. Turnouts feature realistic ties and guard rail details. Sprung points ensure positive contact each time the switch is thrown. Turnouts can be motorized using the Peco PL10 Turnout Motor #552-3010.
HO Storefront Signs - Main St. (Set #4)
Blair Line HO Scale Business and Storefront signs are printed in appropriate colors on thin plastic for easy assembly or placement with plastic cement or CA glue. Colorful signs are based on real signs and many include two identical signs for back-to-back, two-sided mounting. Steam and diesel-era signs make great roadside, street-side, trackside and structure details.
HO Built-&-Ready - Toy & Hobby Junction
Built-&-Ready structures are hand-painted, highly detailed ready-to-place buildings that include decals and window treatments.
Residents of your layout will want to shop at the classic Toy & Hobby Junction. This mid-20th century era Built-&-Ready structure features a grand staircase in the center of the two-story building. Showcase the colorful games and hobbies filling the store shelves with LED lights made for use with the Just Plug Lighting System. View the detailed interior from windows located on every side of the building. This building is hand-painted and authentically weathered. Exterior details include bright red double doors, a train mural and a variety of signage. Toy & Hobby Junction will be available in N, HO and O scales.
30mA RoHS Compliant
HO EMD SD10 - DCC & Sound - SOO Line #543
SOO Line --Conditional Announcement--
- Ex-MILW units / same features
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO - 89ft Thrall Bi-Level Auto Carrier - Ready To Run - CN - Yellow
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6inch (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
Factory-installed grab irons
Separately-applied ladders and brake equipment
Ultra-smooth rolling metal axles with 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24inch radius is recommended for operation.
Tru Color Paint 136 - Acrylic - CN Lettering Gray 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Passengers Ready to Board (6pk)
Self Adhesive Spring Grass Tufts - 4mm (100pkg)
These handy packs contain 100 self adhesive ready made tufts, to stick down wherever required on your layout or diorama.
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .50In x 14In (2 pcs pkg)
HO NSC Ballast Hopper - Union Pacific (Early) #901120
1976+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO Bi-Level Auto Rack - Conrail/TTGX Flat Car #159560
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO 60ft Gunderson Boxcar - TBOX/TTX/Patched #889287
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Fully assembled and ready-to-run
- Razor sharp painting and printing
- Weighted for optimum performance
- 36 inch metal wheels with RP25 contours
- Minimum radius: 18 inches
Main Building: 12-1/2 x 9 x 9-3/8 inches 31.2 x 22.5 x 23.2cm
A very popular kit, the prototype was built in the early 1950s and is similar to those found in all parts of the country.
Static Grass Flock 57.7 in(3) - Dark Green
Use Dark Green to create grasses and weeds along roads and in ditches. This also would be great to model the grass over septic tanks and lines.
Static Grass Flock is a fiber product that models grass and/or weeds. It is available in six colors and can be used alone, or with Fine Turf. Place under trees, along ditches or as forest litter. Attach with Scenic Cement. Fiber length 1 - 3mm.
HO 85Ft General American G85 Flatcar - GTTX (Yellow) #300477
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
HO Enterprise 2-Bay Covered Hopper - Penn Central PC (MOW) #32372
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
Greas-em Dry Graphite Lubricant Tube (5.5g)
This fine, dry graphite lubricant is specially selected for use with Kadee® Couplers & Trucks. 5.5 gram tube. Also an excellent general purpose lubricant for use all around the layout to reduce friction in moving parts and bearing surfaces. Add a puff inside your couplers, move them back-and-forth a few times to burnish and enjoy smooth action of your couplers.
Ideal for reducing friction of moving parts and bearing surfaces.
Budd Baggage-Dorm Original Scheme - VIA Rail Unnumbered
Each Baggage-Dorm includes:
Realistic stainless steel finish
Track-powered interior lighting compatible with DC and DCC layouts
Full underbody detail including separate air, steam and electrical lines
Separate metal grab irons, stirrups and end gates
Accurate D22 brake equipment and piping
Super-detailed 41-NDO-11 trucks with end frames
Full, multi-color interior detail
3D CP beaver shields on CPR models - not just a printed picture!
Sprung diaphragms
Metal Macdonald-Cartier knuckle couplers
HO RTR Thrall Rebuilt 40Ft Well Car - Trailer-Train (DTTX - Red TTX and Next Road logo) #53048
(yellow, black, small red TTX and Next Road logo, yellow conspiracy marks)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers, order now - limited quantity available
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
70-ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Tru Color Paint - Acrylic - Genesse & Wyoming Yellow - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Baltimore & Ohio Rack, Trailer Train Flatcar (TTBX) #962945
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
Athearn - HO RTR PS-2 2600 Covered Hopper - Baltimore & Ohio - #600241
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
HO Elevated Commuter Station - Kit
Kit - 25-5/8 x 6-7/8 x 4-11/16 inches - 65 x 17.4 x 11.9cm
Combine roads and rails in any HO scene with the Cornerstone Urban Road & Rail Overpass kits. These highly detailed HO structures are typical of common designs in use from the 1900s on as increasing auto traffic made replacement of grade crossings a better option, and many are still in use today. A realistic addition to commercial, industrial and suburban areas, they are also easy to use with the Cornerstone Asphalt, Brick and Concrete Street System kits (each sold separately). Each model features detailed plastic parts, molded in concrete and dark gray. For more information about the entire Cornerstone Engineered Bridge System click here
The Elevated Commuter Station Kit features:
Perfect station-stop for mass transit or commuter trains
Fits big city scenes in all popular eras
Includes 4 tall,4-panel retaining walls each measuring 8 x 2-1/2 inches 20.3 x 6.3cm - matches parts in Urban Retaining Walls (#933-4562, sold separately)
Parts for 4 complete platforms - build as 2 short double- or one long single-track station
Detailed stairways, supports, platform canopies, railings & between tracks fencing
Build longer by combining kits
Molded in medium gray & concrete colored plastic as appropriate
Deck requires modeler-supplied 1/8 inch (1.1mm) styrene sheet, sold separately
Milk Cans, Bottles & Cases
Detail trackside milk platforms, station scenes, dairies, milk trucks & more
20 milk cans with handles & lids
8 milk cases
Bottles molded in white (full) & clear (empty)
HO EMD GP9 Phase 2 w/High Hood - DCC & Sound - GTW #4448
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
Product Information
The WalthersMainline Phase II High-Hood GP9 is a must-have model for your first-generation diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as -phase two- GP9s. Like its prototypes, many still going strong today, the WalthersMainline Phase II High Hood GP9 is the perfect power for any assignment and features:
Standard high short hood
Based on as-built units produced from 1955 to 1957 (Phase II)
Limited edition - one time run of these roadnumbers!
Scale width hood with correct contours
With or without dynamic brakes as appropriate
Front and rear footboards
See-through steps
Same powerful drive as WalthersProto(R) locos featuring:
Five-pole skew-wound motor
14 to 1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Machined brass flywheel
Heavy die-cast metal chassis
Constant and directional LED headlights
21-pin DCC plug
Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately)
HO Steam Engine Bell w/Bracket (Brass Casting) - Standard Rope Pull Type
HO PS4750 Covered Hopper - SOO Line (Original 1-1980) #75483
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
SOO -Original 1-1980- brings back a popular PS4750 paint scheme. We offered a different 1979 group of SOO cars about 8 years ago (!) and ever since, our mailbox has been full of requests for MORE SOO. We are very pleased to finally offer another SOO lot, this time from the 400-car 1980 Pullman group. These covered hoppers feature truck mounted brake beams, a side-mount train air line and scale-sized Miner -Selflok- outlet gates. Painted in that special shade of -Soo Line White- (Soo modelers know exactly what we mean), the models show off the classic yellow wheat stalk graphics and green SOO LINE roadname. An accurate and critical car for SOO and CP Rail modelers and lovers of the PS4750 everywhere, these cars continue to serve in grain and in buffer car services.
HO Laser Cut Structure - F.S. Jones Painting - Kit
Product Information
A Great Small Business for your HO Layout
F.S. Jones painting is typical of small wooden business buildings from the early 1900s. This detailed kit features a diminutive wooden structure, concrete loading dock and plenty of full-color signs.
Dimensions:
4-3/4 x 1-3/4inch (12.1 x 4.5cm)
HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4571
5inch stripe w/water expansion tank and ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
2mm Static Grass - Summer Flowers Grass (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
Conrail #4117
EMD SD80MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Models equipped with marker lights will be illuminated
Rubber MU hoses for durability
All New Tooling
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
See through steps
Illuminated ground lights
Front and Rear Illuminated Numberboards
Presenting EMDs 5,000HP 6-axle diesel in a whole new level of authenticity. Starting in 1995, EMD revived the 20 cylinder engine design, last seen in the SD45, and introduced the 5,000 HP SD80MAC. Athearn is pleased to announce this locomotive in Genesis 2.0.
CR FEATURES:
Illuminated front and rear red marker lights
Illuminated Ditchlights alternately flash per prototype w/ effect on DCC+Sound version
Four–panel dynamic intake per CR prototype
LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE:
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Double Billboard - Kit
DIMENSIONS:
5-1/2 x 1-1/4 x 2 inches
White River Productions - Model Railroad News, March 2024 - Magazine
Product News
Locomotives & Rolling Stock
Vehicles & Loads
Structures, Scenery & more
Books & more
HO-Scale Reviews
Then and Now ? Paragon 4 GP35s from Broadway Limited Imports
Quiet, Dependable Transportation ? Stealth GP35 from Broadway Limited Imports
One of Three ? Western Pacific SW1500 from Athearn
Postwar 40-footer ? Southern Pacific Lines boxcars from Tangent Scale Models
Fantasy Dashing Dan ? Bowser Long Island RS-3 from TrainWorld
Pullman-Standard 2893 Returns ? from Athearn Genesis
South of the Border Boxcar ? NdeM Postwar Single Door from Atlas
Uncommon Looks ? Santa Fe Boxcar and Norfolk & Western Caboose from Bachmann
Sixty Feet of Space Awaits ? Pullman-Standard flatcar from Walthers Mainline
Enjoy the Miniature Outdoors ? 1977 Chevy Truck Camper from Mini Metals
Expand Your City ? Merchant?s Row VII from Walthers Cornerstone
N-Scale Review
Pressure Advantage ? ACF Flexi-Flo Hopper from Rapido Trains
S-Scale Review
Peaked-End Premiere ? 2-Bay Fishbelly Hopper from S-Helper Service-Scale Trains
Book Review
Prototype Influence ? History Series from Chesapeake & Ohio Railway Society
Columns & Departments:
Editorial and Letters
Prototype Profile ? Electro-Motive?s GP35
Timetable
From the Archive ? Merchant's Row Series
Dealer Directory
Advertising Index
EMD GP9 Phase II, High Short Hood - Standard DC - Soo Line #2412
(white, red, black)
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today.
Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21-pin DCC plug
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
Based on units in service from the 1960s to 1980s with:
Leslie S-2M and single chime air horns
Firecracker radio antenna
Working Pyle-National beacon
Short-hood forward operation
Pyle late dual sealed beam headlights
Super non-lifting type spark arrestors
Winterization hatch
HO 50ft PS-2 CD 4427 Covered Hopper - Milwaukee Road #98680
Add a signature car to your covered hopper fleet with the Walthers Mainline 50ft Pullman-Standard PS-2 CD 4427 3-Bay Covered Hoppers!
Fully assembled and finished in a variety of colorful schemes perfect for 1960s to early 2000s layouts, features include:
-Limited edition - one time run of these car numbers!
-Prototypes handled all types of grains, feed and similar loads
-Matches prototype dimensions
-See-through running boards
-4-3-4 exterior rib pattern
-Bottom outlet gate details
-Placard name plates as appropriate
-Correct 36in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
SD70MAC Diesel, w/ DCC & Sound - CSX #4547
Era: 2016+
EMD SD70MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
First time ever with front and rear Rubber MU hoses, Trainline hoses, Cut levers, and rear Spare
CSX FEATURES:
CSXs latest -Boxcar- scheme. Simplified cab roof antennas. Rear pilot mounted spare knuckles. 4526 and 4547 are ex CSX 725 class and 4577 and 4579 are ex CR 4130 class.
LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PROTOTYPE SPECIFIC INFORMATION
During the early-1990s, EMD teamed-up with German engineering company Siemens to produce a freight locomotive that was capable of providing AC-traction drive currents, and thus providing a high-horsepower rating and lower fuel consumption for railroads which had an ever-increasing demand for saving fuel consumption by using a lesser amount of units to haul most of their trains.
The EMD SD70MAC was first introduced in early 1993, and began production later-on during the same year after numerous tests and improvements were made. Since then, the EMD SD70MAC has been a staple of heavy freight lines across the country.
0.025 inch Thick Brass Flat Sheet - 6x12inch
Brass Flat Sheet 6inch Wide x 12inch Long (1 pc)
15 x 30cm
TH&B 1951 Chrysler Inspection Car #1 - Unpainted and Resin Cast Kit
HO RTR 68Ft Bulkhead Flatcar - Canadian National CN #622409
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
HO USRA Single-Sheathed Boxcar: PRR (Youngstown door)
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21012
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Scale NSC 73Ft Centerbeam Flatcar - CP Rail (6pkg)
Road Numbers:
318009, 318034, 318051, 318086, 318107, 318145
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
Acrylic Glossy Colors - Chrome Silver - 3/4oz (23mL) Bottle
X-11
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO GE U50 Diesel - DCC & Sound - Santa Fe #1657
ETA: July 2023
Detailed Information
ATSF FEATURES:
Beacon (Flash function in DCC only)
Classification lights (Function in DCC only)
Working Truck lights
Number board lights
Separate see-through air intake grills
MU hoses
Our Legendary Liveries series seeks to explore the -what if- questions that some folks like to indulge in. Like many other railroads in the late 1950s and early 1960s Santa Fe was looking to push the envelope in locomotive horsepower by purchasing engines like EMDs 2400-horsepower SD24, Alcos 2400-horsepower RSD-15 and GEs new groundbreaking 2500-horsepower U25B in 1962. Might they have joined their western counterparts UP and SP and taken a gamble on the U50 too? We think that it looks sharp in Santa Fes dress blues.
U50 SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated classification lights
Illuminated number boards
See-through air intakes
4-cube speakers
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Four cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO NSC 64 Ft 6000 Cubic Gondola HS - MWCX (6 pkg) #1
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Includes Road Numbers:
102797
102806
102820
102858
102874
102886
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Big Sky Blue) #5205
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
HO ACF 4600 3-Bay Centerflow Hopper - DT&I/Brown #10333
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
N Scale Laser-Cut 2-Lane Curved Wood Grade Crossing - 18-20in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights.
HO Pressureaide Covered Hopper - Archer Daniels Midland (Leaf) #50076
(gray, blue, green, Leaf Logo)
Kenworth T680 Sleeper-Cab Tractor - 53ft Dry Van Trailer - Interstate Distribution
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CWSX #140028
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
40Ft Corrugated Container Beacon Horizon Lines 2pk
310135(7)/310156(8)
HO EMD GP40 Mother and Slug - DCC & Sound - MKT (Green & Yellow) #226, 501
1982+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Slug is fully powered! Motor tucked into frame and body
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO EMD SD70M-2 Diesel - DCC & Sound - Susquehanna (NYS&W) #4066
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
NYSW FEATURES:
Former NS units
Front and rear ditch lights
PTC antennas
In late 2020, a group of four former Norfolk Southern SD70M-2 locomotives arrived on the property of the New York, Susquehanna and Western railway. The units were initially pressed into service wearing standard black Norfolk Southern paint, with a small patch on the cab. In 2023 the units were painted in NYSWs attractive yellow-and-black livery, based on the scheme that had been applied to the B40-8s
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
N Scale City Water Tower - Kit
Product Information
The prototypes for the Walthers Cornerstone City Water Tower are landmarks in small towns, big cities and at factories. In use since the early 1900s, steel water tanks like these are still common sights today. Proudly emblazoned with the name of the town or company, you will also find them at hospitals, college campuses and military bases.
Easy to add to layout scenes, kit parts come molded in appropriate colors. Authentic details include a conical roof, caged ladder, and concrete base. A set of alphabet decals is included so you can personalize your water tower with town names, industries and more. The City Water Tower is just one of a wide variety of Cornerstone N Scale kits.
The completed City Water Tower measures: 2-3/8 x 2-3/8 x 7inch (6 x 6 x 17.7cm)
Easy-to-build plastic kit
Realistic latticework supports
Includes alphabet decals
Molded in appropriate colors
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504931
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
HO Spark Arrestors -Super- Harco Centrifugal
Used on nonturbocharged units.
For nonturbocharged EMDS from UP, BN, BAR and ARR.
Die-cast metal
HO SD45-2 - DCC & Sound - Santa Fe #5658
ATSF FEATURES:
Early style anticlimber
Snowplow
Air Conditioner
Can style radio antenna on raised ground plane
Beacon (Functions in DCC)
SD45-2 LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
Evergreen Scale Models - OD White Polystyrene Rod .08In x 14In (6 pcs pkg)
HO Procor 3000CuFt Aluminum Hopper w/Handrails - Single Painted/ Unlettered Car
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO Enterprise 2-Bay Covered Hopper - Canadian National (MOW Grey) (3pkg) #1
3-Pack includes the following numbers, all individually packaged: #53307, #53308, #53351
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO GP9RM - DCC Ready - Canadian National (Large Noodle) #7009
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
Surface Primer for Plastic & Metal (White) 180ml
This white surface primer is an invaluable tool, the undercoat it provides being perfect for areas to be painted with a light colored topcoat. It will help give your model a smooth, lustrous surface.
Tru Color Paint 116 - Acrylic - Wisconsin Central Gold - 1oz
HO 50Ft PCF B70 Boxcar - w/ Youngstown Doors - SSW/Cotton Belt #66680
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
Rusty Rail
Easily transforms shiny rails and clean ties to look as realistic as the rest of your layout.
Use before or after installation
Paint metal or plastic
Two tips work for all scales
Colour rails a realistic rusty color.
HO MLW M420 - DC/DCC Ready - Delaware-Lackawanna #2045
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
C-27 ICC Caboose w/lights - B&O/Chessie System #C-3915
The ultimate detail with the best Genesis features.
International Car Co. began specializing in caboose production as early as 1941. When the railroads entered the 1960s, many needed to replace their aging, in some cases home shop built, cabooses. International Car responded with a product that could be tailored to each railroads specific needs. Using quality components and modern engineering, ICC became a leading name within the industry.
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
ICC CABOOSE FEATURES:
- Better than brass detail including roadname and road number specific detail Laser-Sharp Painting and Printing
- Interior seating for the addition of crew figures.
- See-through End Platforms and Steps
- Flush Window Glazing
- Wire-form Grab Irons
- Caboose trucks with animated rotating bearing or static friction bearing caps
- Axle Generator Details
- Body-Mounted McHenry® scale knuckle-spring Couplers
- Machined Metal RP25 Profile Wheel Sets
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Separate wireform grab irons, etched metal coupler platforms
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for trouble-free operation
- Window packaging for easy viewing, plus interior plastic blister safely holds the model for convenient storage
- Multiple road numbers
- Minimum radius: 18in
LED LIGHT EQUIPPED FEATURES:
- LED lighting for long life and reliable operation
- On-board DCC Decoder by NCE
- Operates in DCC and Analog (DC) with lighting Functions Controllable in DCC
- Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
- LED Interior Lights
- All functions NMRA compatible in DCC mode
SOUND EQUIPPED MODELS ALSO FEATURE:
- Soundtraxx Tsunami SoundCar decoder w/ included sounds:
- Air horn or conductors whistle as appropriate
- Clickety-clack with optional wheel flat spot sounds
- Brake set/release sounds including retainers and brake squeal
- Big Hole emergency brake application sound
- Handbrake tie-down/release
- Adjustable flange squeal
- Air, horn, and bell sounds work seamlessly with Soundtraxx locomotive sound decoders
- Supports Advanced Consisting in DCC
- Full DCC functions available when operated in DCC mode
- All functions NMRA compatible in DCC mode
B&O CHESSIE FEATURES:
- Brand NEW ICC B&O Style body
- Angled window screens
- Early style axle-driven generator
- Caboose trucks with roller bearing caps
- Ash pans
- Toilet Drain
- Illuminated marker lights, where appropriate
- Reflectors on end cages
- Overhanging, diagonal-panel roof with or without blank panel at smoke jack per prototype
- Overhanging, x-panel roof for the B&O Chessie caboose
Chessie #3835, #3887, #3915 features: First time ever C26A version. Dayco axle generator with notched undeframe.
Chessie C-3771 Gold Caboose - Unique safety slogan and Gold and Silver Paint
HO AutoScenes - Backhoe
Intricately detailed vintage backhoe makes a great addition to any layout construction scene. Includes two figures.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
HO RTR Thrall 5-Unit Rebuilt 40Ft Well Car - Trailer-Train DTTX #748273 A-E
(yellow, Large Red Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft on both single and five-unit cars. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers - limited quantiuty, order now!
100- and 70-ton roller bearing trucks
Correct 36inch and 33inch RP-25 turned metal wheelsets
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
Proto MAX(TM) metal knuckle couplers
HO Carfloat Apron - Kit
Dimensions:
8-1/2 x 8-1/2 x 8-5/8 inches
(21.2 x 21.2 x 21.6cm) (Height Above Water)
Based on where railroads transferred freight cars onto barges the Walthers Cornerstone HO Scale Carfloat Apron is where all the rail-marine action takes place. The Carfloat Apron structure consists of a moving apron (similar to a bridge) that can be locked to the float. This keeps the tracks aligned during switching and allows the barge and the apron to move up and down with the tides. Counterweights and lifting machinery are housed in the towers at the end of the apron.
This detailed HO Scale model is an ideal way to add waterfront traffic to your operations. Built on the waters edge, they require little space, but add plenty of interchange traffic. Often found serving large yards as well as industrial areas, they can be among the busiest spots on a railroad. The model features a positionable apron, detailed hoisting towers (unpowered), as well as supporting piers.
- Perfect addition to waterfront scenes
- Detailed hoisting towers and superstructure
- Metal Code 83 switch points included
HO Wooden Water Tanks pkg(3) - Plastic Kit
Product Information
Rooftop Wooden Water Tanks are as much a part of a city skyline as clouds! Look at any big city scene and youll see tanks perched on the roofs of all kinds of buildings. From downtown offices, stores and apartments, to grimy industries, this Walthers Cornerstone kit is a detail thats perfect for every tall building on your HO Scale layout. Detailed plastic parts look like real wood and are molded in colors. A separate roof and supports are also included. Each kit comes with parts for three complete wooden water tanks.
Three complete tanks
Easy-to-build plastic kit
Great detail for rooftops on larger buildings
Finished model measures:
4inch (10.1cm) Tall
2-3/8inch (6cm) Wide at Walkway
2inch (5cm) Wide at Base
HO Scenic Accent Figures - Backyard Birthday - Scenic Accents(R)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism.
HO PC&F 5241 CUFT - Boxcar - Boston & Maine - Single Car #3398
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO EMD SD7 - DC/Silent - Southern Pacific (Black Widow) #5323
Southern Pacific
- Steam generator equipment details on short hood
- Correct Mars style -ash can- light on both ends of the locomotive
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO Scale GP38 - DC/DCC Ready - CSX (Grey & Blue/ B Scheme) #2013
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
HO 40Ft Fruehauf Exterior-Post Volume Van - PRR: 1960s #200589
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
Water Tint - Olive Drab
Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Tints can be added to Deep Pour Water, Surface Water, and Realistic Water to model any aquatic ecosystem. Water Tints are great for any scene, from translucent to opaque waters, and everything in between. Create customized colors by mixing Water Tints and White Water Highlights together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
HO CP Containers - 20Ft 40Ft - CP Ships - Decals
1980+
HO SD70ACU - DCC & Sound - Progress Rail Leasing (PRLX) #7330
ETA: October 2023
Detailed Information:
PRLX FEATURES:
Nathan 5-chime horn
Large plow
Alternating flash ditch lights on both ends (Function in DCC)
In mid-2022, Progress Rail purchased a batch of ex-NS SD70ACUs. Some of them had a red -PRLX- hand-written over the old logo, and some others
were simply patched out completely as depicted in our models.
ROAD NUMBER SPECIFIC FEATURES:
#7271 Ex-NS patched to PRLX, originally UP. Forward light grey/primer radiator fan, slightly faded body
#7330 Ex-NS patched to PRLX, originally CIT. Full white upper cab -brow-, slightly faded body
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Seaboard Air Line - Delivery #102
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO Low Speed Limit Signs (16pk)
HO Steam Generator Exhaust Stack - Plastic (2pk)
N Tri Star Industries (Scale: 70 x 60ft) - Blue
Product Information
Kit can be built 16, 20 or 24 scale feet tall. End walls and side walls have door openings provided. Rear walls have cut lines for optional door openings. Includes doors, windows, vent, downspouts, foundation and steps. Measures a scale 70 x 60ft.
HO EMD SD7 - DC/Silent - Bessemer & Lake Erie #454
Bessemer & Lake Erie
- Unique -B&LE- style sand fill door hatches
- Long hood forward operation
- Extra large pilot step and corresponding additional stepwell step (First time done on a plastic model!)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO Merchants Row 2 - Kit
Kit - 10 x 5 inches (25.4 x 12.7cm)
City models made easy! This kit brings together five different stores in one structure at a dynamite price.
Often just a few blocks away from the railroad tracks, the business district is one of the most important parts of any small town or big city. This unique kit combines five stores with one space-saving structure that fits on almost any size layout. Add your personal touch with paint and the full-color decals to create a one-of-a-king model for your steam- or diesel-era scene.
40Ft Corrugated Container Mitsui OSK Lines 2pk
MOFU #067544(7) , MOFU #073773(9)
HO USRA Single-Sheathed Boxcar: D&H
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16135
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO EMD SD9 - DCC & Sound - Chicago, Burlington & Quincy #837
-yellow frame
Chicago, Burlington & Quincy
- Phase IV (First time for a plastic model!)
- Higher short hood with a corresponding cab height
- Cornered-off section on the long hood behind the cab
- Two 48inch radiator fans as opposed to the normal (four) 36inch fans
- Conduit pipes were removed from the top of the radiator
- No ladders on the short hood end
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO Marine Industries Piggyback Flatcar - Canadian Pacific #505649
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
HO MLW M630 - DCC & Sound - BC Rail #716
R-W-B Hockey Stick, recessed nose ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound V5 decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
Evans X72 Box car: Conrail w/ Small Logo - Single Car #229472
Detail Variations:
As operated between 1976 to the 1990s.
6-pack includes the following numbers:
#229077
#229291
#229301
#229398
#229401
#229472
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
3-1/4 x 3/4 x 3-1/2inch 8.3 x 1.9 x 8.9cm - HO Scale
N Scale Unpainted Hydrocal Castings - Cut Stone Retaining Walls (6 pkg)
Use Retaining Walls alone, installed adjacent to each other to create straight or curved walls or use with Tunnel Portals. Cut to varying heights to create stepped, winged walls. 6 ea. Color with Earth Colors Liquid Pigments. 135ft (41.15m)scale length
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX #16118
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO NSC Ballast Hopper - Union Pacific (Late) #919170
1990s+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO FCA 52ft 100-Ton Bulkhead Flatcar - CWLX #200023
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2016 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
Tru Color Paint - Acrylic - Erie Lackawanna Gray - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 5820 Covered Hopper - Procor/UNPX (Union Carbide) (6pk)
Includes the following numbers, all individually packaged:
#122023
#122026
#122041
#122044
#122059
#122068
Era: November 1977+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
JL Innovative Design 376 HO Billboard Signs - Vintage Tractors 1940s-50s pkg - 6 signs
international Harvester, Ford, Allis-Chalmers, Minneapolis-Moline
HO SD70ACU - DCC & Sound - Canadian Pacific (Heritage Scheme) #7019
ETA: October 2023
Detailed Information:
CP FEATURES:
CP Heritage Units with -Block- lettering and alternate masking
Heritage Unit nose detail configuration
Blue flag bracket
High mounted nose door lock
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Spray Can - Bright Gun Metal (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16104
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Scenic Accents - Tourists (7pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
Set includes men and women enjoying some sightseeing.
HO Enterprise 2-Bay Covered Hopper - GFCX (6pkg) #1
6-Pack includes the following numbers, all individually packaged: #101, #104, #110, #115, #128, #134
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
N Scale 53ft Corrugated Container - Crowley #6010887
HO EMD GP7 - DCC & Sound - Maine Central MEC #564
Detailed Information
MEC FEATURES:
Winterization hatch
Full sill skirts
Nose-mounted bell
Tall MU stands
Maine Central continued the process of dieselization of their freight operations in Fall 1950 and 1953 with the purchase of 9 EMD GP7 locomotives equipped with dynamic brakes. We are offering these units in MECs -simplified- green paint scheme for the first time in our Genesis product line.
ROAD NUMBER SPECIFIC FEATURES:
#563
Unique MEC logo on front and rear ? New color formulation of gold color based on input from MEC modelers
#564
-Simplified- green paint scheme
#566
-Simplified- green paint scheme
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO F89F Trailer - TTX/Brown #151111
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast underframe
- Wire formed brake plumbing
- Detailed deck
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Minimum radius: 22 inches
- Recommended radius: 24 inches
PSC Transfer Van - E&N Division - CRHA - 76695
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
HO Modern Trash Cans (24pk)
Keep your contemporary HO scale city clean with these SceneMaster authentic replicas of modern trash cans. Found outside all kinds of businesses, in parks and alongside other public buildings, these one-piece models feature a detailed lower base and cover, and are easily customized with a bit of paint (sold separately).
HO 1-3/4 inch 1-Lane Wood Grade Crossing - Kit (3/pk)
This Blair Line HO Scale Wood Grade Crossing is ready to install on your highway and road crossings. Similar to those found all over North America, laser-cut wood kits are detailed with laser-etched boards and bolt holes. These rugged crossings are perfect for industrial areas, rural areas or anywhere grade crossings are not well maintained.
N Scale 36ft Galvanized Steel Grain Bin - Kit
(Narrow - 2.66 inch Corrugation)
Corrugated steel grain bins are a staple in any agricultural setting, placed on farms, elevators, industries, and beside railroad tracks. Used with a variety of farm commodities, these bins provide a safe, dry place to store that commodity until it goes to market.
With several styles to choose from, these grain bins will look right at home on your layout. They feature prototypical corrugations, realistic galvanized steel appearance, various side sheet heights, and a variety of diameters.
Narrow corrugation bins have corrugations spaced a scale 2.66 inches and the rings are 32 inches tall. Wide corrugation bins have corrugations spaced 4 inches apart with 44 inch tall rings.
All bins are easy to assemble - just stack the rings, glue them together, attach the roof and you are done! Every ring comes as one solid piece, so no time consuming and messy assembly of individual side sheet pieces to create each ring, saving you time and frustration!
What size bin will fit your space? Try our grain bin size calculator or printable template.
https://www.iascaled.com/store/GrainBinSizeCalculators
https://iascaled.com/docs/ho-bin/GBM-HO.pdf
HO Scale - 1927 Hudson Flatbed Truck - Unpainted and Resin Cast Kit
HO PC&F 5241 CUFT - Boxcar - BKTY Patch 2 (UP) - Single Car #153475
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Standard Caboose - Norfolk Southern (Double Zeros) #555555
MASTER MODEL FEATURES:
Thin endrails
Roofwalk where appropriate
Accurate painting and lettering
Roller-bearing caboose trucks
Window glazing
Metal knuckle couplers
Separate brake cylinder
Open smoke stack
Triple valve and air reservoir
Evergreen Scale Models 116 Opaque White Polystyrene Strips 14in .015x.125 (10pcs pkg)
HO Lightweight Coach -VIA Rail Canada #5642
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO 60ft NSC 5150 3-Bay Covered Hopper - Archer-Daniels-Midland (ADMX) #52278
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Plastruct 90442 HO ABS 2 in Stair (2pcs pkg)
SCALE
HO
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
9/64
HEIGHT IN MM
3.6mm
WIDTH IN INCHES
25/64
WIDTH IN MM
9.9mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
5
LENGTH IN MM
125mm
USE DESCRIPTION
ABS STAIR Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision injection molded
HO 60ft Flat Car - BNSF #848916
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO RTR Trinity RAF 33C 3-Unit Spine Car - Trailer Train TTAX #355135
Features
-Ready-To-Run
-Die-Cast Metal & Plastic
-Fine-Scale Detail All Around
-Chemically Etched Walkways
-Accurately Painted/Printed
Kit - 33-1/2 x 3 x 11 inches 83.7 x 7.5 x 27.5cm
Part of the new Cornerstone Engineered Bridge System
For more information about the Cornerstone Engineered Bridge System click here
Prototypes provide maximum clearance for vessels on busy waterways
Low-speed motor & gear drive included
Add to new or existing scenery with Single-Track Railroad Bridge Concrete Abutments (#933-4551, sold separately)
Use with Walthers Code 83 Bridge Track (948-886, sold separately)
Has clearance for todays taller equipment
Authentic trusses, chords, counterweight & other details
Bridge tenders shanty & interlocking tower
Molded in two colors and clear plastic
HO EMD GP35 - Paragon4 Sound/DC/DCC - NYC #6146
(Black w/White)
Ubiquitous on American railroads, the EMD GP35 is a 4-axle diesel-electric locomotive built by EMD and subsequently General Motors Diesel in the mid 1960s. Over 1300 of these locomotives were produced, and they were operated by virtually every major railroad in the United States. Additionally 26 units were built for Canadian railroads and another 57 units were built for Mexican railroads. These freight locomotives were powered by EMD 567D3A 16-cylinder engines that generated 2500 horsepower.
List of individually controllable lights in our EMD GP35 models:
- Headlight
- Rear Light
- Mars Light (SP only)
- Numberboard Lights (Front & Rear)
- Front Classification Lights
- Rear Classification Lights
- Emergency Light (SP only)
- Rotary Beacon (where appropriate)
- Ditch Lights (where appropriate)
- Cab Light
Road-specific detail options that are prototypically accurate for each road name:
- Truck sideframes
- Dynamic brake hatch
- Open & closed type fans
- Short hood detail arrangement
- Long hood end detail arrangement
- High short hood option where accurate
- Horn type and location
- Bell location
- Multiple front pilot types
- Multiple rear pilot types
- Accurate cut lever types
- MU receptacle arrangement
- Multiple sunshade options
- Antenna type and location
- Wind deflector type
- Rooftop AC for ATSF type
- Rotary beacon type and location
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up
- ABS Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, Wipers, and Etched Metal Grills
- Prototypical Light Operation - accurate for each paint scheme
- Prototypically Accurate Sounds for the EMD GP35 Diesel Locomotive
- Metal Kadee-compatible Couplers (2)
- Will Operate on Code 70, Code 83, and Code 100 Rail
- Minimum Operating Radius: 18 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
HO B-50-15 Boxcar - As Built w/ Murphy Roof - Southern Pacific (1946 to 1952 scheme) #14780
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
HO GP38-2 - DCC & Sound - Helm Leasing (HLCX) #3814
Detailed Information
HLCX FEATURES:
Ex Texas Mexican Railway
3800 gallon Fuel tank
Blomberg B trucks
Front ditch lights
Front small EMD plow
Firecracker antenna
Helm Leasing is a large locomotive leasing outfit known for providing reliable power to railroads for short term and long term contracts. Many were painted into this very attractive scheme and could be found in service on just about any railroad.
ROAD NUMBER SPECIFIC FEATURES:
#3812
Ex TM #863
Mid/Late phase body
All-weather window
Leslie 3-chime horn
#3814
Ex TM #867
Late phase body
Q-style radiator fans
Nathan P5 horn
Angled blower housing
All- weather window
GP38-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - GAXX #6424
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Intermountain Railway Company 14-Panel Coalporter(R) Coal Gondola Mitsui Rail Capital MBKX (silver, blue)
#300933