HO Trinity RAF 53C 5-Unit Spine Car Set - Trailer Train TTAX #555180 (5pkg)
HO C425 PH2 DCC Ready Silver BC Rail
Road number different than picture shows
FEATURES:
C425 Phase 2 models include cab with either horizontal or vertical headlights per the prototype
Models include redesigned AAR style truck sideframes with separate brake cylinders and separate bearing cap detail (included when appropriate per the prototype).
Directional lighting w/ golden-white LEDs
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Factory-equipped with AccuMate knuckle couplers
Analog version features NMRA 8 pin plug for DCC
Separately-applied wire grab irons, ladders, and drop steps
Separately-applied marker lenses
Improved painting and printing w/painted handrails
Two painted crew members
Analog (DC) Operation
The LokSound Select Dual-Mode decoder allows your Atlas Gold Series locomotive to be used on DC as well as on DCC layouts.
Please note that the Atlas Quantum Engineer will NOT operate an Atlas Gold Series locomotive equipped with a LokSound Select decoder on an analog (DC) layout. However, the sound and lighting functions of the LokSound Select decoder in the Atlas Gold Series C424/425 locomotive can be controlled by an easy-to-use basic DCC system
Also note that on a DC-powered layout, a DCC and sound equipped locomotive (such as the Atlas Gold Series C424/425) CANNOT be consisted with another locomotive that does not also have both DCC and sound. (This statement does NOT apply to DCC-equipped locomotives operating on a DCC layout.)
Sound Functionality
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
60ft Pullman-Standard Flatcar - Ready to Run -- TTX OTTX
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
1940-49 REO Speedwagon Refrigerated Truck - Unpainted and Resin Cast Kit
SubTerrain System - Foam Cutter Replacement Wire
Special nichrome wire retains an even temperature needed to cut SubTerrain foam products. Use only with the Hot Wire Foam Cutter.
Length - 48 inches (121 cm)
Gauge - 30 or 0.010 diameter
HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Circle Keystone w/ Coal Slogan) #256822
1941+
Full slogan reads -Coal Goes to War-.
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO Dash 9-44CW - DCC/Sound - UP #9675
UP FEATURES:
- Patched and renumbered former CNW units
- Patch, logo placement, and burn marks per prototype road #
- Nathan K3LA horn
- Primered replacement engine compartment doors
ROAD NUMBER SPECIFIC FEATURES:
#9675
- Primered replacement air conditioner
- replacement equipment door from a UP-painted loco, medium-height snowplow
#9696
- UP logos on sides of nose
- burn marks on engine compartment
- ghost outline of original CNW road number (8632)
- large snowplow
#9741
- UP logos on side equipment doors
- medium snowplow
- lasted in CNW paint until at least 2018
DASH 9-44CW SERIES LOCOMOTIVE FEATURES:
- Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
- Etched, see-through walkway steps
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - CSX #9998
(With larger fuel tank)
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
Refill Tapes - Coarse Grit (6pk)
Tough, flexible tapes for wet or dry application on lightweight, high strength, anodized aluminum frames. Unlike needle files, FLEX-I-FILE automatically follows compound curves, contour changes and fillets w/o leaving scratches or flatspots.
-Removes flash from plastic or metal castings.
-Smoothes and polishes rough surfaces and seams.
-Follows irregular or flowing contours.
-Provides a delicate touch for hairline accuracy.
Use with product 232-123 or 232-700
HO RTR PS-2 2600 Covered Hopper - Grand Trunk Western (GTW) #111150
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
HO 40Ft PS-1 Boxcar - Norfolk & Western (Black Repaint) #44657
Date: NK 9-73
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
1:32 ABS LADDER (2pcs)
Use as straight ladders commonly found in numerous industrial, commercial, and residential applications. Note, in most industrial applications using a fixed ladder, a cage is also desirable. See CL Safety Cage & Ladder Sets. Precision Injection Molded in Gray ABS Plastic.
Ideal for all outdoor or professional model construction where model life is critical.
SCALE
1:32
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/8In
HEIGHT IN MM
9.5mm
WIDTH IN INCHES
39/64In
WIDTH IN MM
15.5mm
LENGTH IN INCHES
15In
LENGTH IN MM
375mm
Dark Rust Deposits
The perfect product to recreate a rust texture in a light rust color in surfaces of vehicles or accessories. Once they are dry, they have the same scale appearance as real crusted rust. The finish is extremely authentic and can be combined with other tones for more realism.
HO Modern Concrete Grade Crossing - Kit
DIMENSIONS:
2 Paving Approaches: 5-1/2 x 1 inch each
2 Crossing Centers: 9 x 1/2 inch each
4 Crossing Edges: 9 x 1/4 inch each
1 Double-Track Center Paving: 8-15/16 x 1-1/8 inches
Detail modern HO Scale highways and access roads serving ports, military bases and other heavy industry quickly and easily with the Cornerstone Concrete Grade Crossing kit. Matching the style of prefab concrete crossing panels in use from the 1990s to the present, the kit includes parts to build a 60-scale foot wide crossing, perfect for four-lane highways, and molded cut lines make it easy to customize to fit two-lane streets as well. Molded in realistic concrete gray, authentic details include recessed crane lift bars, tapered ends and a nonskid surface, and the kit also includes matching street approaches and between-track sections. Easily used with Code 70, 83 or 100 tracks, add the SceneMaster Modern Cantilever Grade Crossing Signals (949-4330 2-Lane, or 949-4332 Single Lane) and Grade Crossing Signal Controller (949-4359) each sold separately to complete your new contemporary crossings.
HO International Wide-Vision Caboose - Northern Pacific (1969) #10411
(Delivery 1969 w/ Pyle Lanterns)
Product: BN International Wide-vision Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber or Gould Caboose Roller Bearing with separate brake beam part as appropriate for each paint scheme
Wheels: CNC-Machined 33 inch Wheels
DC/DCC Lighting Features: Interior Lighting as well as lighted FRA Steady Red Lights
Signal Driver Cable Kit
Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets.
Use this kit to make signal driver cables to connect your SE8c to the signals on the railroad. Make the cables any length that you desire and place the signal connectors at the locations where you will install signals. All the signals are carried neatly in the ribbon cable so you can avoid a “bird’s nest†under your layout.
HO SD70 - DCC/Sound - Illinois Central #1025
ROAD NUMBER SPECIFIC FEATURES:
All Units:
- Early dynamic brake grills
- Integrated Cab Equipment (ICE) equipment bulge on low nose
- Nathan P5 horn
- EMD Spartan cab detailed with corresponding interior
- Toilet hatch
- IC late battery boxes
- Cab mounted Sinclair and small can antennas
- Walkway-mounted spare knuckle basket
- Spartan cab 4-step walkway
- Non illuminated engineers side ground light
- Spare knuckles and holders on rear pilot
- Drop grab irons (MU hose holders) on rear pilot
- Sidesill-mounted AEI tags
- Early jacking pads
- Front / Rear flat-top ditch lights with angle kick plates
- CSX/NS style tall plow
- Early anticlimbers
- Front / Rear MU receptacles with light brown cables
- Large EFCO button
- Early speed recorder
- Early 5000 gallon fuel tank with digital fuel gauge and single sight glass
- Era Late 1999+
#1021, 1025:
- Low cab handrail
#1032:
- Standard cab handrail
#1037:
- Late-angled cab handrail
MODEL FEATURES:
- Fully-assembled and ready-to-run
- Front / rear trainline and MU hoses with silver ends
- Coupler cut levers with loops per prototype
- Sunshades and sunshade tracks per prototype
- Roof details such as antennas, air conditioners, beacons, and conduits per prototype
- Operating ditch lights
- MU receptacles and cables per prototype
- Pilot face spare knuckles and brackets per prototype
- Early or late anti-climbers
- 3 or 4 step walkways
- AEI tags mounted on the frame or jacking pads per prototype
- Safety tread on the walkways
- Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
- Anti-glare panel painted on the nose
- Windshield wipers
- Tinted or clear cab windows per prototype
- Detailed and painted cab interior with control stand, display screens, detailed crew seats
- Standard or Freight-style brake wheel
- See-through radiator fans
- Lift rings
- Factory installed wire grab irons
- Fine-scale Celcon handrails for scale appearance
- Underframe mounted bell- regular or electronic
- Low mount stepwell lights (non-operating)
- Dual sanding lines
- Rear pilot drop grab iron (MU hose retainer) pre prototype
- DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
- McHenry lower-shelf scale knuckle spring couplers
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on Code 55 and larger rail
- Incandescent bulbs for realistic appearance
- Bidirectional constant lighting so headlight brightness remains constant
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Minimum radius: 18 inch
- Recommended radius: 22 inch
SOUND EQUIPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami sound
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
N Scale 2-Bay Hopper - ATSF #82076
These GA-105-class covered hoppers with Bettendorf trucks were built in 1957 in a series of 500 cars.
HO WGH Track Plan Set
Enjoy DC and DCC!
Our HO Track Sets are only the beginning of your HO scale Unitrack layout! Experience the snap-together reliability and convenience of Unitrack while enjoying the realistic appearance and texture of the molded roadbed. Each set can be used as packaged for the simplest of temporary single-track operation, or they can be combined with additional Unitrack sections and turnouts to create a larger and more elaborate configuration. Available in two varieties, the basic Unitrack oval and the more complicated WGH plan set, Unitrack is all set to start your layout right!
Creates an exciting 4x8 ft layout with turnouts, bumpers, and sidings that is a perfect stepping stone for a more complex beginning layout! Uses 19-1/4 inch radius curves (490mm).
N Scale ACF 39Ft 2-Bay CF Covered Hopper - Round Hatches - CSX NYC (Tan) #875035
Product Information
This ready-to-run N Scale ACF 39Ft 2-Bay Center-Flow Covered Hopper with Round Hatches from Micro-Trains(R) is based on cars built beginning in the 1960s, making it ideal for your diesel-era freight into the 2020s and beyond. Covered hoppers such as this are used for hauling grain, fertilizer, frac sand and other bulk, granulated materials. This covered hopper features free-rolling Delrin(R) trucks with contoured axles, truck-mounted Magne-Matic(R) couplers and interior weights. Cars also include thin-profile foot stirrups, brake wheels and fine decoration. This ACF 2-Bay Center Flow Covered Hopper is one of many Micro-Trains N Scale freight cars.
HO Auto-Max Carrier - CMO #800025
Era: Late 2000+
MODEL FEATURES:
- Separately applied ladders, brake rigging, stirrups, and handbrake details
- Simulated corrugated roof
- Full articulation with flexible diaphragm
- Safety striping
- 70-ton roller bearing trucks
- 33 inch machined metal wheels with RP25 contours
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
In 1999, Gunderson began production of the Auto-Max articulated auto rack car. This unique car can carry 22 SUVs on three sets of internal ramps. Measuring over 140 feet long and 20 feet tall from the railhead, the Auto-Max pushes the operational and clearance limits of the railroad industry.
StowAway Throttle Holder
FEATURES:
-Bracket will hold: DT602, UT6 and other legacy Digitrax throttles
-Access to loconet and power ports when stowed away
-Stores throttle when not in use or when charging
-Fascia mounted
-Durable Design
-Easy to install
HO Lauston Shipping Background Building - Kit
FEATURES:
- Easy-to-build plastic kit
- Perfect for use between scenery and backdrop
- Fits 1960s to present layouts
- Truck entrance and dock door
- Colorful decal signs for several businesses
- Molded in appropriate base colors
MEASUREMENTS:
19 x 1-1/8 x 4 inches
Tru Color Paint - Acrylic - Caboose Red - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
Juneco Scale Models Round Shovel - Spade (4/pkg)
PX108-6F HO Power Xtender
HO 40 Steel Side Box Car - Wabash NJI&I (Flour Loading) -Ready to Roll- No.1624
N Scale 60ft Coach Car - New York Central #2080
FEATURES:
- Based upon C&NW and CNJ prototypes
- Full scale dimensions and details
- All cars include separately applied window glazing, diaphragms and roof vents
- Observation car includes separately applied end railing details and a drumhead
- Detailed interiors (excluding baggage car)
- AccuMate operating knuckle couplers
HO Enterprise 2-Bay Covered Hopper - Canada Southern (Gothic) #880153
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO B-50-15 Boxcar - As Built w/ Viking Roof - Southern Pacific (1946 to 1952 scheme) #15485
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
Light Green
Models tree foliage for medium to large trees and low-to-medium ground covers, such as bushes, trees and shrubs. Use for any scale, colorfast and blends with other foliage.
Available in six realistic colors and great for making small trees too! Each package includes 32 oz volume of material. Underbrush works well for medium ground cover or undergrowth. It blends with our Foliage, Field Grass and Turf products.
1. Apply Scenic Glue (S190) to layout.
2. Press Underbrush into glue and allow to dry.
HO Modern Water Tower - Kit
Product Information
The prototypes for the Walthers Cornerstone HO Scale Modern Water Tower are landmarks in small towns, big cities and at factories. In use since the 1960s, steel Water Towers like these are common sights today. In use, water towers like this maintain a constant pressure in the underground supply pipelines during periods of peak demand. Because theyre usually the first thing visitors see, most have the village or business name on the side. Some are also adorned with the state, town slogan or logo, and occasionally, a big happy face. This easy-to-build plastic kit features a body with realistic weld lines, plus a service door entrance and overflow pipe at the base. Decals for three different town names and more are also included. The Modern Water Tower is one of a wide variety of Cornerstone HO Scale industrial buildings.
A landmark in small towns and big cities
Great for 1960s and later layouts
Easy-to-build plastic kit
Authentic overflow pipe, access doorway and non-working top warning light
Includes city name decals
As shown the Modern Water Tower kit measures: 9-1/2inch (23.7cm) Tall x 3-1/8inch (7.8cm) Diameter
Light Ghost Gray Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO Diesel Fueling Facility - Kit
The easy-to-build Walthers Cornerstone HO Scale Diesel Fueling Facility kit is a model of a classic North American small servicing area fueling facility. Based on prototypes introduced in the 1940s when railroads began the shift from steam to diesel power, diesel fueling facilities were originally placed on the servicing leads near roundhouses. Today, you will still find them at terminals where locos are serviced between runs and out on the road at crew change and train inspection points.
The Diesel Fueling Facility is an authentic addition to any scene and includes everything to complete a two-track fueling facility; storage tank, fuel crane, water crane, pump house and top unloading rack (for unloading diesel fuel from tank cars). For modern era modelers, environmental track pans to catch fuel and oil spills are also included. This model kit features plastic parts molded in appropriate colors so there is no painting necessary. Easy-to-follow illustrated instructions make assembly fast and fun for first-time kit builders or seasoned modelers.
Storage Tank: 5 x 2-3/4 inches (12.5 x 6.8cm)
Platform: 11 x 7 inches (27.5 x 17.5cm)
Unloading Rack: 1/2 x 3/4 x 2-7/8 inches (1.2 x 1.8 x 7.1cm)
N Scale Rerailer Ramp & UniJoiner Removal Tool
HO 13,600 Gallon Acid Tank Car - Union Tank Car/White (UTLX) #11745
ETA: July 2023
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
HO Switch Stand w/Interlock Set (1)
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Early CWSX (6 pkg) #2
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
140028
140047
140053
140054
140066
140085
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale Double-Track Truss Bridge 9.75inch 24.8cm (silver)
Comes completely assembled including double track.
Resin Prep
Sylvan Scale Models own brand of mould release cleaner. Effectively removes all traces of mould release agent from cast resin parts, allowing for better paint adhesion. This is an organic, pleasant smelling citrus based cleaner that does not contain any petroleum distillates. Do not allow this or other solvent type cleaners to come in contact with styrene. Follow directions and cautions on bottle. Sold ONLY at hobby shops. Each bottle contains 3 ounces. A -must have- on every resin kit modellers hobby bench.
HO RTR ACF 4650 3-Bay Hopper - ATSF (Gray Ga-150) #305111
Date: BLT 6-65
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO Scale Diesel Loco Details
HO PC&F 5241 CUFT - Boxcar - BKTY (UP) - Single Car #153412
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
4 x 6 x 2-1/16 inch - 10 x 15 x 5.8cm
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Chesapeake & Ohio C&O #5209
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Evans X72 Box car: Conrail Large Logo - Single Car #269252
Detail Variations:
As operated between 1976 to the 1990s.
6-pack includes the following numbers:
#266873
#266899
#269252
#269325
#269377
#269423
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
All Scale Learning Kit - Trees
Learn the ease of adding trees to any layout. The kit contains enough product to make 18 trees ranging in height from 3/4 inch to 8 inches.
Value-packed tools specifically developed to teach beginning modelers and other hobbyists how to use the Terrain and Landscape Systems. Learn to sculpt terrain, cast, color and install rocks, landscape various scenes, create paved areas, make trees, model water features and other scenic details. Reseal packages for easy storage.
Tin Flat Sheet - 0.015inch x 4inch x 10inch
1 piece
Length: 10inch
Width: 4inch
Thickness:0.015inch
HO RTR 50Ft ACF Exterior Post Boxcar - CSX Transportation #130039
Product Information
Serve shippers on your HO railroad with these WalthersMainline 50Ft ACF Exterior-Post Boxcars. Responding to a growing shortage of serviceable cars, ACF and other builders unveiled a new generation of bigger equipment in the 1970s with increased width and height to improve carrying capacity. Today, theyre still in service for Railbox and many other roads, where they can be found moving all types of cargo. Features of these models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes seen from coast-to-coast 1974 to the present
Handles all types of general freight loading
Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
41Ft 3inch Truck Centers
15Ft 2inch Tall
10Ft 8inch Wide
Fully assembled
Correct 33inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 85ft ACF 44-Seat Coach - Union Pacific (Sunshine Special) #5480
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
Delivered new in 1954 from American Car & Foundry with seating for 44, the car is currently named for a Missouri Pacific train running between St. Louis and various Texas cities from 1915 to 1948 when the new Texas Eagle took over its route.
N Scale Barber Roller Bearing Trucks w/Medium Extension Couplers (10 pair, Assembled)
(1037-10)
Bulk pack of standard, black wheels with Magne-matic medium extension RDA couplers.
10 pairs per pack
Assembled
Includes 2 styles of bolster pins
PX112-2 - HO Power Xtender For 2 Pin Decoders
Keeps locos & sound running during power interruptions caused by dirty or bad track.
Hold up time varies based on decoder load & track conditions.
PX112-2 Plug N Play Install on DH126 & DH166 Series Decoders
PX Body Size 1.575 x 0.547 x 0.315 in
(40mm x 13.9mm x 8mm)
Perfect for moving bulk loads of all kinds that dont require protection from the weather, the WalthersMainline 34ft 100-Ton Two-Bay Hopper is a versatile addition to HO operations!
One time run of these road numbers, order now - limited quantity available!
In service from the 1970s to the present
Used to haul ballast, sand, gravel, ore and other bulk loads
Factory-applied door and brake details
Heavy die-cast metal underframe
Add a realistic load in minutes with the cast resin Chooch Gravel Load (214-7292) sold separately
Correct 36in RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 60ft Hi-Cube Plate F Boxcar - Trailer Train TBOX #661006
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
RS-18u, DCC & Sound - Ontario Southland #181
Era:2006-Present
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
HO RTR 53Ft Duraplate RoadRailer Trailer - Norfolk Southern (Triple Crown-CN Decal) #361051
Norfolk Southern, ex CN, Grey with CN decal halo
Triple Crown Medium Logo
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
0.090 inch Thick Aluminum Flat Sheet - 6x12inch
Aluminum Flat Sheet 6inch Wide x 12inch Long (1 pc)
15.2 x 30cm
HO Cardboard Cut - Quarrystone
The embossed Wall Sheets with photorealistic wall motifs are ideal for creating walls by mountains and rocks, town centres, tunnel entrances, and much more. The ?Ashlar? stones make old buildings, train stations and even garden enclosures even more detailed.
The Wall Sheet ?Ashlar?, Extra Long is perfectly suited to being used for H0 and TT gauge.
Product benefits:
Realistic appearance thanks to photorealistic wall motifs
Structured surfaces, as Wall Sheets are made of embossed cardboard
Easy processing: cut to size with scissors and glue on
Available in two lengths
Rock Molds Random Rocks
Highly detailed, flexible and durable rock molds can be used to cast small boulders, rock outcroppings, top rocks for fields and creeks, or make entire rock faces by combining castings produced with these molds.
Soft Grip Knife Set - 5 Assorted Blades
Includes 1 of #11 Blade & 1 Each #10, 16 & 33 Blades
HO USRA Composite Drop-Bottom Gondola -Ready to Run- Michigan Central #12129
Date: BLT 8-19
All are Ready-to-Run
-Laser Cut Wood Sides and Floor
-Laser Sharp Painting and Printing
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Layout Control System - Single Color LED Fascia Indicator - White
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
HO 28ft Container w/Chassis - United Parcel Service (2pk)
Now its easy to add UPS(R) service to your HO layout with this exciting series of officially licensed replicas from Walthers that includes Cornerstone structure kits, SceneMaster vehicles and figures!
HO 1988 G43B Coil Svc. Gondola w/ Coil Racks (Coils Not Included) - Conrail (CR) #601893
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -1988 G43B Coil Svc.- With Coil Racks ? Coils Not Included in the now-classic Conrail red paint. This series represents the former PC-painted G43B series. Conrail maintained the lettering locations that PC did, painting the Conrail reporting marks, road number, and Conrail can opener logo in the same locations PC had stenciled them. The G43B prototype features cushion draft gear, giving the model a distinctive look compared to the other G43 classes. The top chord of the car has a -COIL STEEL LOADING ONLY- stencil to remind customers and railroad officers that the car is equipped with coil racks. Our model has coil racks too, and we sell beautifully executed steel coils for this car separately. We recommend a load of four coils if you want to replicate most prototype loading patterns ? for the size of coil we created. Yes, we did the math. These Conrail coil service gondolas are offered in 12 road numbers and feature details appropriate for these 1969-built cars.
Bowser HO 50Ft 4 Door Boxcar Southern Pacific No.606577
Ready to run
Roller Bearing Trucks with 36in wheels
Knuckle couplers
HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - DT&I
#85000
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO 50ft 100-Ton 4-Bay Hopper - Conrail #498751
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from mid-1960s to mid-2000s
- Standard car for 1980s and later Powder River unit coal trains serving power plants
- Also used to transport stone and other bulk loads
- Die-cast metal underframe for excellent performance loaded or empty
- Sloped sheet braces & update brake gear
- Correct 36 inch turned metal RP-25 wheels
- Proto MAX(TM) metal knuckle couplers
N Scale Farmer Grain (FarMarCo) PS 4427, 4750 and ACF 4650 Covered Hopper - 1968-83 - Waterslide Decals
Circa: 1968-83
Scale: N Scale
Equipment Type: TLDX, EUGX, PTLX, WCDX, PS 4427, 4750 and ACF 4650 Covered Hoppers
Description: This set will cover a variety of FAR-MAR-CO Pullman Standard covered hoppers and the 4650 ACF Centerflow Hopper. FAR-MAR-CO was formed in mid-1968 in the merger of four regional cooperatives in Kansas, Nebraska, and Missouri. Supporting grain movements from terminal elevators to domestic sales destinations or export terminals is a 1000-car jumbo covered rail hopper fleet. FAR-MAR-CO lasted between 1968-1983 before being purchased by the employees and renamed PMS foods Inc. - Waterslide Decal
Linker Plugs
HO AutoFlood III RD Coal Hopper - PGNX #1100
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - DEAX (6 pkg) #1
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
11133
11269
11280
11312
11333
11344
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 36ft Chemical Tank Car - Vulcan Chemical/GATX #33789
FEATURES:
- One-time run of these road numbers, order now, limited quantity available!
- Newly tooled tank with bolted jacket
- Perfect for steam- and diesel-era freight service
- Prototypes carried all types of chemicals between producers and end-users
- Small chemical/pressure dome
- See-through platform
- Correct 33 inch turned metal RP-25 wheelsets
- Proto MAX(TM) metal knuckle couplers
Spray Can - Light Gray (IJN) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
HO - 3D Tall Air Compressor (6 per package)
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Canadian General Transit #8010
Date: NEW 8-32
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
N Scale Red Wing Milling Co. - Kit
Product Information
Flour mills have changed dramatically since the water-powered mills of the 1800s. The Walthers Cornerstone Red Wing Milling Co. captures the look and feel of contemporary mills in a size that fits most layouts. 1950s and later mills produce enormous quantities of flour and other milled grains. They once received grain in boxcars and have since moved to covered hoppers. Outbound flour and meal moves out in Airslide(R) and similar covered hoppers as well as in bulk hopper trucks. The modern concrete Red Wing Milling Co. features truck and rail loading facilities, blowers, vents, separate doors and windows, and full-color decal signs.
As shown the finished kit measures: 6-5/8 x 4-7/8inch 16.5 x 12cm
Contemporary trackside industry
Prototypes receive grain in covered hoppers or boxcars, ship flour in Airslide hoppers, boxcars and by truck
Exterior dust collectors, fire escape ladders and other details
Railcar loading canopy
Truck loading doors
Easy-to-build plastic kit
Realistic decal signs
HO 89ft Thrall Enclosed Tri-Level Auto Carrier - Norfolk Southern/ETTX Flat #33519/800667
Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these Walthers Proto models! Introduced in the mid-1970s especially to carry automobiles, the prototypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89ft flatcars with sidesill cut-outs and 28in wheels for added clearance. In service all across North America, the racks carry the owners logos, and most ride on flatcars leased from TTX with ETTX reporting marks.
A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
-Limited edition - one time run of these numbers!
-Prototypes in service from the 1970s to the present
-Factory-installed grab irons
-Separately molded and applied side ladders
-Ultra-smooth rolling metal axles with correct 28in wheels
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24in radius is recommended for operation.
HO GE U25B Low Hood - DC Silent - Santa Fe: Pinstripe Scheme #1613
The HO scale U25B Locomotive features:
Phase I, II & III units represented in 1st run. (Phase IV & other units will come with future runs)
Single-window style for low nose units. (Double-window in future runs)
Both low- & high-short hood versions
Early high- & later low-style side doors.
Road specific details for each model
Working step lights on low-short hood models
Different roadname-specific exhaust stacks
Roadname-specific battery box doors on engineers side
Roadname-specific air cleaner boxes on rear
Working inspection lights on all units
Lighted control stand inside cab
Different types of fuel & air tanks, as appropriate
1/2 Inch ScrollSander Sanding Belt (4 pkg)
Zona ScrollSander sanding belts smooth the edges of wood, plastic, metal and composites. Fabric-backed belts have molded polycarbonate ends for mounting on the 795-35750 Adjustable Jewelers Saw, hand fret saws and scroll saws that take 5inch Plain End blades. They work on curves, concave or convex edges. 5-3/8inch long.
1/2inch wide -- 5-3/8inch Long x 1/2inch Wide, 1 Each 80, 120, 180 and 220 Grit.
1:87 2020 Proterra Catalyst Electric Bus - MTA New York City
By Awesome Diecast
HO Rocky Point Lighthouse - Kit
FEATURES:
- Perfect for steam or diesel-era layouts
- Traditional wooden design keepers quarters and tower
- Walls and trim molded in two realistic colors as one complete part
- Classic light tower with flashing LED tower light
- Foundation with basement windows
- Simple assembly with minimal gluing
- Easy-to-build plastic kit requires minimal gluing
- Printed interior window treatments
- Molded in seven realistic colors and clear window glazing
MEASUREMENTS:
3 x 8-1/8 x 8-7/8 inches
Rescue Pads Heavy Cleaning Pad Replacement (2pkg) for HO Scale, N Scale, O Scale Tracks
Rail Tracker replacement pads to repair track and remove heavy build-up.
Grooved to fit rail for easy tracking
Smooth burrs in track
Can also be used with 3-Rail O Scale Track
60ft Pullman-Standard Flatcar - Ready to Run -- Alaska Railroad
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
60Ft PS-1 Boxcar - Grand Trunk Western - Blue #383414
Beginning in the 1960s, automakers approached rail carriers with the desire for larger freight cars to transport auto parts from suppliers to manufacturing centers. In response, the 60Ft auto parts boxcar was introduced. Carrying a wide variety of auto components including engine blocks, transmissions, brake drums, and others, these cars were a fixture throughout North America for the next four decades and can still be found in service today. Often times, entire trains of auto parts and related cars could be seen near major production facilities as automakers switched to just-in-time delivery methods, requiring prompt deliveries from the railroads providing service. It was common to see trains consisting of 50Ft, 60Ft, and 86Ft boxcars, specially modified flat cars to carry lightweight chassis, and autoracks all destined for one auto or truck manufacturing facility. As the auto industry supply chains evolved and manufacturing facilities were consolidated, many of the 60Ft boxcars were used in other markets and could be found hauling a variety of goods including appliances, paper goods, cardboard, and similar items.
HO MLW FPA-2u & FPB-2u - DCC/Sound - CNR - (1954 Scheme) #6759 & 6859
The entire FPA-2u and FPB-2u production is a CONDITIONAL RELEASE. If Rapido receives enough pre-orders by the order deadline, then production will proceed! If not, then they will never tool these models, and your deposit will be credited back to you.
The Rapido FPA-2u and FPB-2u models feature:
- The only HO scale MLW FPA-2u and FPB-2u units ever. Full stop. End quote.
- Operating headlights, class lights and back-up lights
- Canadian-cast Dofasco Type B trucks
- Full underbody piping and conduit
- Separate grab irons and handrails
- Correct MLW-specific large-capacity fuel tanks
- Heavy, die-cast chassis
- Rapidos improved 5-pole motor with dual flywheels
- Full, multi-color interior
- DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
- Accurate sounds recorded from the REAL FPA-2u #6758
- Improved light grey color on the CN 1961 scheme
HO Greenville 86ft Double Plug Door Box Car - B20 Repaint 1989+ Norfolk Southern #868163
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: October 2021
Norfolk Southern (NW) B20 Repaint 1989+ offers one of our most requested schemes for this boxcar, a Norfolk Southern option. These cars were painted in NS brown paint in 1989 complete with the NS logo stenciling in white. This 1965-built Greenville group features accurate Center-of-Car Cushioning details, a Hydra-Cushion cylinder and truck mounted brake hardware. The B20 class rides on 70-Ton Barber S-2A Roller Bearing Trucks, with 33inch wheels and accurate rotating -Timken- roller bearing caps. As a reminder, N&W was the largest original purchaser of Greenville 86ft auto parts boxcars from multiple eras, and these cars literally went everywhere. These beauties are available with six road numbers!
Athearn N F89-F Bi-Level Auto Rack, NYC/BTTX #913217
Athearn SKU ATH15029
Detailed Information
MODEL FEATURES:
Die-cast underframe
Authentic undulating safety railing
Accurate Whitehead and Kales Auto Rack
End bridge plates per prototype and era
Body mounted McHenry operating knuckle couplers
Detailed deck
Highly-detailed, injection-molded body
Minimum radius: 10in Recommended radius: 12+in
PROTOTYPE AND BACKGROUND INFO:
Introduced in the early 1960s, the Trailer Train (now TTX Company) F89F flatcar has been a mainstay of contemporary railroading. A product of Bethlehem Steel Companys (BSC) Johnstown, PA plant, over 9,000 of these (89ft 8in over the strikers) cars were built throughout the 1960s. Visually distinctive from other long flatcars of their era thanks to their C channel side sills, these versatile cars were adapted for many types of service and loadings over the years, ranging from Trailer-On-Flatcar (TOFC), to autoracks, to structural steel loading. While the majority went to Trailer Train, many were built for various railroads, typically for autorack service. Many were de-racked in later years, being reassigned and equipped for other service - TOFC, vehicle loading, pipe service, etc.
Operationally, these cars are appropriate for any layout set from the 1960s to the early 1980s. The Auto Racks would be fastened to the 89ft flatcar for auto service from Detroit.
Specifications
COUPLER STYLE: McHenry Scale Knuckle
HO Country Store - Kit
Main Building: 6 x 3-5/8 x 2-3/4 inches
Gas Pump Island: 2-1/2 x 2-1/2 x 2-3/8 inches
Need gas, beef jerky, and a bag of chips? The Walthers Cornerstone country store is just the place! Based on gas station convenience stores that sell all kinds of products, its perfect for roadside scenes on your layout. The kit features a main building with a curved pitched roof, gas pump island with a canopy, and two pumps. Parts are molded in appropriate colors and full-color printed signs are included.
FEATURES:
- Fits late 1960s to present day
- Combined convenience store/station used by many oil companies
- Fits easily in city or rural scenes
- Gas pumps and island
- Full-color printed signs
- Molded in three colors and clear plastic
Plastruct 90045 ABS Channel 1/4 (4pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/4
HEIGHT IN MM
6.4mm
WIDTH IN INCHES
5/64
WIDTH IN MM
2.0mm
THICKNESS IN INCHES
.050
THICKNESSS IN MM
1.3mm
LENGTH IN INCHES
24
LENGTH IN MM
600mm
USE DESCRIPTION
TRADITIONAL ABS CHANNELS Use for bracing or lightweight vertical support members in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor
HO Plastic Couplers w/Gearboxes - Medium (9/32 inch) Overset Shank (2pair)
This industry leading coupler features plastic standard coupler with metal knuckle, and #634 standard centering spring and comes complete with insulated draft gearbox and lid. The #22 Magne-Matic Plastic Coupler may be mounted with the included #213 or #232 Gearbox or with most other manufacturers cast-on coupler pockets.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.
Package Includes:
- (2) Pair #22 Plastic Shank Couplers - Medium Overset Shank
- (2) Pair #634 Centering Spring NO.5 Style
- (2) Pair #213 .055 inch ID & .100 inch ID Bushing/Sleeves
- (2) Pair #212 Talgo Truck Adaptors
- (2) Pair #213 Gearboxes
- (2) Pair #232 Gearboxes
- (2) #622 Knuckle Springs
N Scale NSC 64 Ft 6000 Cubic Gondola HS - TLPX #2221
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Evergreen Scale Models - Opaque White Polystyrene Square Tubing .375In x 14In (2 pcs pkg)
Spray Finishing Enamel - Gloss Black (3oz)
HO Single BiLevel Commuter Car - UTA FrontRunner - Unnumbered Coach
Salt Lake City - Series 4
Note: Unnumbered coaches do not include decals. Decals are available from highball graphics.
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
1/8 inch OD Round Brass Tube (Soft Fuel Line) 0.014inch Thick x 12inch Long (2 pkg)
Round Brass Tube 0.014inch Wall thickness x 12inch Long Soft Fuel Line (2 pcs)
Outside Diameter: 1/8 inch
All Scale Learning Kit - Rock Faces
Learn to make, install and color realistic rock formations. The kit contains enough product to make four to five rocks.
Value-packed tools specifically developed to teach beginning modelers and other hobbyists how to use the Terrain and Landscape Systems. Learn to sculpt terrain, cast, color and install rocks, landscape various scenes, create paved areas, make trees, model water features and other scenic details. Reseal packages for easy storage.
HO 1950s Sedan - Taxi, City Cab Company
MODEL FEATURES:
- Factory assembled with detail parts applied
- Molded interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
- Beacon or taxi sign where appropriate
N Scenic Accents(R) Figures -- Goodbye People 7/
HO EP-5 Electric Loco - DCC & Sound - New Haven, Delivery #376
Detail Variations:
Delivery Scheme With Vents
FEATURES:
- Accurately scaled from prototype blueprints
- Period-correct detail options, including carbody, pantograph and hardware variations
- Accurate paint and lettering
- Several road numbers per paint scheme (where applicable)
- Full cab interior
- New Haven delivery and repaint schemes (repainted units have smaller NH logo on nose and re-positioned/larger nose road number)
- Directional operating pantographs (sound models only)
- DC/Silent or DC/DCC/Sound versions available
- DC/DCC/Sound version features an ESU Loksound decoder with accurate -Jet- recordings
- Complete lighting package including headlights, class lights, ground lights and cab interior lighting
- Factory-installed MacDonald-Cartier metal couplers
HO 36Ft RTR 3-Dome Tank Car - ACFX #4554
Product Information
Add authentic cars to your steam- or diesel-era layout with these 36Ft 3-Dome Tank Cars from WalthersMainline! Serving a wide range of both producing and consuming industries, these cars were actually three tanks in one, ideal for handling smaller amounts, and a greater variety of product at once. Features of these cars include:
One time run of these roadnumbers, limited quantity available - order now!
Prototypes hauled petroleum, chemicals and similar liquid loads in three compartments
In service from late 1920s to 1960s
Detailed underbody with AB brakes
Fully assembled
Correct 33inch turned-metal RP-25 wheelsets
Proto MAX metal knuckle couplers
White w/Railroad Maintenance-of-Way Logo Decals
Fully assembled & painted white - typical of todays heavy trucks operated by railroads, gas, water & power utilities, as well as city, county & state highway departments
Colorful railroad logo decals sized to fit for quick conversion to maintenance-of-way service including BNSF, CN, ATSF, BN, CP Rail, CNW(TM), NS, Chessie, DRGW(TM), MILW, KCS, CR, CSX, SOU, SP(TM) & UP(R)
Licensed replica of popular International trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled & painted
Die cast metal & plastic parts
Introduced in 2002 to replace the 4000-series trucks of the 1990s, the medium-duty 4300 was built in three variations and became a very popular chassis for a variety of commercial applications. Today, they are still in production as the International Durastar.
Baffle Kit - 9.5mm
HO AutoFlood III RD Coal Hopper - PGNX #1180
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO - 89ft Thrall Bi-Level Auto Carrier - Ready To Run -Ferromex
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6inch (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
Factory-installed grab irons
Separately-applied ladders and brake equipment
Ultra-smooth rolling metal axles with 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24inch radius is recommended for operation.
HO GP38-2 - DCC & Sound - Missouri Kansas Texas (MKT) #318
Detailed Information
MKT FEATURES:
Offered by popular demand
Newer -simplified- scheme
Mid-Phase body
Leslie 3-chime horn
3200 gallon fuel tank
88inch nose
Correct paint scheme and colors
Blomberg B trucks
Xenon clear strobe (light effect with DCC)
To try and keep painting costs down, MKT adopted a more simple version of this scheme by eliminating the yellow stripes on the top of the cab.
ROAD NUMBER SPECIFIC FEATURES:
#313
Non-dynamic
Yellow safety frame stripes
MU catches on both front and rear pilots
Road number on sides of long hood
#318
Extended range dynamic brakes
No frame stripes
MU catches on rear pilot
Road number on sides of cab
#320
Extended range dynamic brakes
Yellow safety frame stripes
MU catches on rear pilot
Road number on sides of cab
GP38-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO H-6-G - DCC & Sound - Painted/ Unlettered - Steel Cab
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO G2 SD80MAC - DCC & Sound - CSX/YN3 #4590
CSX FEATURES:
Former CR units
Operating forward and reverse red marker lights
Correct horn and antennas per road number
Approved by CSX experts
Just as a batch of SD80MACs were sent to NS after the CR split, CSX acquired a batch as well. After a short period of running around patched, they were all repainted into CSXs -YN3- scheme. Only one, CSX 801 (which was renumbered to 4591), received the -YN2- scheme. It eventually got the YN3 treatment.
ROAD NUMBER SPECIFIC FEATURES:
#801
Fresh YN2 repaint with CR details.
#4591
YN2 paint with patched numbers
K5 horn
white painted roof with GPS dome.
#4590
YN3 repaint
-Spirit of Benning-
Leslie 3-chime horn
white painted roof with GPS dome.
#4600
YN3 repaint
K-5 horn
white painted roof with GPS dome.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
CV chart included in the box
HO CA-8 Early Caboose w/Lights DCC Ready - Union Pacific #25576
ETA: August 2021
Detailed Information
Union Pacific CA-8 Caboose FEATURES:
Caboose trucks with swing arms, friction or animated roller bearing bearing caps as prototype appropriate
Various safety slogans, in both early banner style with green lettering and late vinyl decal with special graphics
Sliding cupola side windows
Cupola-mounted marker lights when appropriate
25576 is offered in an early CA-8 Pool service configuration
HO Urban Concrete Overpass - Kit
The Urban Concrete Overpass Kit features:
Typical of more ornate concrete overpasses built for residential and suburban areas from WWI on
Builds double-track railroad ballasted deck-bridge with two-lane roadwaybelow
Scale 14 FT - 4.2m clearance between roadway and bridge deck
Ornate concrete panels and walkway railings
Arched column supports
Separate wing walls can be installed to fit straight or angled installations
Measures:
Overall Size with Wing Walls: 12-3/8 x 9-1/4 x 3-1/16 inches 31.4 x 23.4 x 7.7cm
Bridge & Abutments Only: 8-1/2 x 5 inches - 21.5 x 12.7cm
Track Height from Street: 2-5/8 inches - 6.6cm
HO RTR 70 Ton 2 Ballast Hopper w/ Side Chutes - ATSF #177273
Blt. 5-57
Product Information
Perfect for work train service on our railroad, Bowser HO Scale ready-to-run 70-Ton 2-Bay Ballast Hoppers with Side Chutes (Ballast Gates) feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make these 70-Ton Ballast Hoppers welcome additions to any diesel-era freight train consist.
BSI-106
Gap Filling Medium- 5-10 sec Glue
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.06 (10pcs pkg)
HO GMD-1 - DCC & Sound - Canadian National (1900s Noodle w/ Black Cab) #1903
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
Diesel Locomotive MU Stand - EMD Late Single Type - pkg(2)
HO Scale MU Stands are based on those used on many diesel locomotives for operating in multiple-unit consists. This detail is part of the line of Detail Associates HO Scale locomotive detail parts.
RTR 60Ft Gunderson DD HC Box, BNSF/Wedge #761301
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO FGE 57Ft Mechanical Reefer - DCC Ready - SLSF #333033
Detailed Information
57Ft MECHANICAL REEFER FEATURES:
Available with onboard SoundTraxx sound
Scaled from prototype manufacturers drawings and field measurements
Repaints often vary by road number in the size and style of the reporting marks, car numbers and patch shapes
See-through protective screens on the genset end
Detroit Diesel 2-71 Genset visible inside
End wall corrugation visible inside
Inner refrigerator bulkhead
See through end platforms
Two different exhaust stack types: straight pipe with -flapper- or T-shaped -smokejack- per prototype and era
Full underframe detail including Keystone cushioning, air brake reservoir, control valve, brake cylinder, brake plumbing, and fuel tank
Factory applied end ladders and door closure rods
Trainline hoses with silver ends
Three different coupler cut lever styles per prototype
Body-mounted or truck-mounted brakes per prototype
McHenry operating scale knuckle couplers
100-ton roller bearing trucks with rotating bearing caps
Fully-assembled and ready-to-run
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Machined metal wheels with RP25 contours
Weighted for trouble-free operation
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
42 ft Coil Steel Car with Fish Belly Side Sill DLRX #166274
The Atlas Master HO Scale 42ft Coil Steel Car with Fishbelly Side Sill is perfect for adding interest to your 1990s and later steel mill train consists. The increased volume of coiled-steel transportation gave rise to a new purpose-built freight car. Previously rolls of coiled-steel had generally traveled in specially equipped gondola cars. In the 1960s a lighter type of car emerged specifically for hauling coils of steel in an integral trough. The car type gained popularity and eventually over 17,000 cars were built. This 42ft Coil Steel Car with Fishbelly Side Sill is patterned after cars introduced in the 1990s and in use in the 21st century. Features of the 42ft Coil Steel Car with Fishbelly Side Sill include prototypical paint schemes and lettering see-through walkways, a removable hood on equipped cars, inside floor detail cut levers, metal wheels and AccuMate magnetic knuckle couplers.
Stoddarts Ltd. - 3D Railroad Wall Artwork - Pennsylvania RR Logo
HO RTR ACF 4650 3-Bay Hopper - Norfolk & Western #171221
Date: NEW 6-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
#6 Right Hand - Super track
1/24 Scale - SCX24 RTR 2021 Ford Bronco 4WD Truck Brushed - Gray
Axial reaches a new peak in 1/24 scale realism with this officially licensed Ford Bronco 4WD that tops the proven SCX24 platform with a highly detailed ABS hard body. Ideal for indoor or outdoor trails, its a must for Ford fans and RC enthusiasts of all ages!
- Factory-assembled and ready-to-run, with 3-channel radio, 030 brushed motor, servo, ESC/receiver unit and AA transmitter batteries included
- Officially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tire
- Bonus second decal sheet for optional customization
- Nitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheels
- Working lights in front, with molded lenses on all four corners of the body
In The Box:
(1) Axial SCX24 Ford Bronco 1/24 Scale 4WD RTR
(1) Horizon Hobby 2.4GHz 3-Channel Radio System
(1) Axial AS-1 Micro Servo
(1) Horizon Hobby ESC/Receiver Combo
(1) Dynamite USB LiPo Charger
(1) Dynamite 88T 030-Size Brushed Electric Motor With Pinion
(1) Dynamite 350mAh 2S 30C 7.4V LiPo Battery
(4) AA Batteries for Transmitter
(2) Decal Sheets
(1) Product Manual
Needed to Complete:
Nothing ? everything is included in the box!
HO Greenville 86Ft Double Plug Door Box Car - Canadian National (Delivery 10-1978) #795101
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Canadian National (CN) -Delivery 10-1978- is our first Greenville 86Ft auto parts offering in Canadian National. The CN rostered a few orders of Greenville cars, but this order for 80 cars in 1978 was the largest. The 1978 cars have body-mounted brake gear and End-of-Car Cushioning components, along with that signature 5-grab iron body that makes them stand out from any other style of 86Ft Greenville box car. Some of these cars have lasted in their original CNA brown delivery scheme for a long time - we can verify an example to at least 2016! We know this scheme is a big deal - and we thank our CN fans for their patience. We wanted to release it with the correct body grab iron details.
HO RTR 53Ft Platewall RoadRailer Trailer - Conrail/ Norfolk Southern (Triple Crown) #461502
(white, Large Logo, NS-CR Logos)
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
PH5 Power Pro 5, DCC Complete System
An updated version of Power Pro Starter set item 524-1.
This 5 Amp starter set has everything you need to get DCC-equipped trains up and running. It includes the user-friendly Pro Cab. You can be up and running in less than 20 minutes.
Contents of the PH5:
- PH5 System Box with two 2-pin plugs
- Pro Cab Throttle
- Coiled cable for cab - 6-wire RJ12 cab bus cable
- Twelve-inch flat cable - 4-wire RJ-H control bus cable
- UTP cab bus panel
- Power Pro system reference manual
- Internationally approved Power Supply with power cable - P519
Do not forget to use a REAL surge protector, not a power strip!
We highly recommend a DCC track output Circuit Breaker like the EB1 v1.1.
HO SD70ACU - DCC & Sound - Norfolk Southern #7281
ETA: October 2023
Detailed Information:
NS FEATURES:
Nathan 5-chime horn
Large plow
Alternating flash ditch lights on both ends (Function in DCC)
In 2016, NS started an ambitious rebuild using ex UP SD9043MACs as cores. The rebuild included upgraded computers and electronic brakes, engine and main generator overall, and new EMD cab. NS designated them as SD70ACUs.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Sterling Salt #49053
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO Just Plug Lighted Vehicle - Cool Convertible
Rag-top down and summer in mind, this convertible is ready for a Sunday drive!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
HO 20K Gallon Acid Tank Car - GATX/White #41863
Era: 1991-2009, 2010-Present Day
MODEL FEATURES:
- Multiple road numbers
- Many separately-applied details
- Etched metal walkways
- Different top platforms as appropriate per prototype
- Different brake systems as appropriate per prototype
- Separate wire grabs and handrails
- Trucks with animated rotating bearing caps
- Minimum radius: 18 inches
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Body-mounted, McHenry scale double-shelf knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod
details
- Machined metal wheels with RP25 contours operate on all popular brands of track
HO Bettendorf T-Section Self Centering Trucks w/33 Inch Ribbed Back Wheels
Mounts with Kadee Self Centering bushing on a flat surface with a #2 or 2-56 screw or without the Kadee Self Centering bushing on a 0.140 inch or smaller molded on truck post secured with the original screw.
The Bettendorf T-Section truck was introduced in the 1920s with a one piece cast side-frame. It had a life similar to the Andrews truck.
Metal Fully Sprung Trucks Features:
- Self Centering Action - Trucks self align themselves parallel with the car for easier placement on track.
- Code 110 (.110) #523 33 Inch Ribbed Back Wheels
- Accurate Markings
- Incredible Detail True to Prototype
- Non-Magnetic Metal Wheels
- Highly Flexible Sprung Trucks
- Metal Side-frames & Fully Sprung Self Centering Bolster
- Smooth tracking Free Rolling Contoured Insulated Axles
- RP-25 Free Rolling Wheels
- #637 HO Scale Truck Springs
- Patent number 5,768,999
PACKAGE INCLUDES:
(2) Each #554 Bettendorf T-Section Self Centering Trucks (assembled)
(2) Each Self Centering Bushing
(2) Each #2 Screw
HO ACF 2970 Covered Hopper - Burlington Northern #435534
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons, stirrup steps and brake wheel
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Screw-mounted express-type trucks
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO SD70 - DCC & Sound - Canadian National #1016
CN EX IC FEATURES:
Former IC with sublettering
Same major features as IC yellow frame stripe described above
#1016:
Spare knuckle basket on walkway
No rear ditch lights
Large front plow
Early fuel tank
P5 horn
#1031:
No spare knuckle basket on walkway
Equipped with rear ditch lights
Small front plow, late fuel tank
P5 horn on stand
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 60ft Hi-Cube Plate F Boxcar - Trailer Train TTX #663173
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO Propane Tanks - Kit
Product Information
Walthers Cornerstone Propane Tanks are great details for a grain elevator or other industries that need fuel for their processes. These large capacity tanks are used to store propane to fuel grain drying equipment or anhydrous ammonia, used as a fertilizer. Similar tanks can also be found at propane dealerships. The kit includes parts for two propane tanks with supports and decals for several businesses.
Each tank measures: 9 x 1-1/2inch (22.8 x 3.8cm)
Two large-capacity storage tanks with supports
Realistic piping and top platforms
Great detail for industrial complexes
Easy-to-build plastic kit
HO NSC Ballast Hopper - Canadian National (Maintenance Scheme) #302190
1976+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO High Cube DD Plug Box - BCOL #100438
MODEL FEATURES:
Separately applied brake wheel
Underbody with brake system details
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
SDH167D - Series 7 Sound Decoder w/Speaker & Capacitor
FEATURES:
- 2 CV-Selectable Steam & Diesel Sound Schemes Included
- Mobile Decoder with SoundFX v3
- Fits many HO locomotives
- Digitrax 9-Pin Harness
- Motor 1.0 Amp/2 Amps Peak
- 6 FX3 Functions, 200ma Output
- New sound .spjs loadable with Digitrax USB programmer
- 10-Pin sound harness with 8 Ohm 16 x 26 x 9mm Box Speaker
- 300uF Capacitor
Great Lakes Diesel Tugboard Kit - Unpainted and Resin Cast
(1/87 Scale)
During the 1950s many of the existing fleet of steam powered tug boats were converted to diesel. This resulted in modifications to the wheelhouse and stacks. These changes are reflected in this modernized version of Great Lakes Towing Companies L.C. SABIN. Many of the converted tug boats are still in service today. Tug measures 11in x 3-1/4in.
-Cast Polyurethane Resin Kit
-Easy Assembly
-Details Moulded in Place
-Accurate
-Less Trucks and Couplers
Try Sylvans Resin Prep! Helps prepare your model for painting!
Part #SSM-A001
NATO Green Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO GE ES44DC - DCC & Sound - Burlington Northern Santa Fe (BNSF) #7672
ETA: June 2023
Detailed Information
BNSF RAILWAY FEATURES:
As-delivered antenna arrangement
Salem air filters
Nose door with window
Hi-Ad trucks
Unit delivered in Heritage II scheme, repainted into Heritage III with some unique nuances (grab iron colors, logo sizes, fonts)
ES44 SERIES LOCOMOTIVE FEATURES:
Illuminated ditch lights
Tinted cab windows
Large antenna dome
GPS dome
Hand brake panel grille
Nathan K5HL horn
5000-gallon fuel tank
Low or high front headlight per prototype
See through dynamic brake intakes
Low or high front headlight per prototype
See through dynamic brake intakes
Short auxiliary cab rear left-side doors
Right side forward electrical cabinet with X-Panel
Engine compartment side grab irons (Non-CP Units only)
No engine compartment side grab irons (CP Units only)
Flush radiator compartment doors
Flush heat exchanger housing and top radiator grilles (Non-CP Units only)
Raised heat exchanger housing and top radiator grilles (CP Units only)
Dynamic brake exhaust vents spaced per prototype
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO GP9RM Mother & Slug - DCC & Sound - Canadian National (Early) #7236, 237
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
The GP9RM Slug features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks with outside brake shoes or Flexicoil trucks
Traction motor details on gearbox
Detailed walkway tread
Metal side handrails
Footboard pilots or curved plate pilots on appropriate road numbers
Working head lights
Both models are available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO Scale 1980-1985 Chevrolet Impala Sedan - Assembled - CN Maintenance
The Rapido Chevrolet Caprice and Impala cars feature:
Both Wagon or Sedan carbodies
1980s body style designed from photos and drawings
Multiple front grille designs covering the entire 1980s
Real rubber tires (and white walls too, where appropriate)
Multiple rim designs (wire spoke, dog dish and more)
Realistic chrome finish on bumpers, rims and more!
HO Rough-Edged Bright Paint Out Blanks
Decal set with a variety of shapes and sizes of blank paint patches in 5 colors.
These bright railroad colors include:
-GTW Blue
-Jade Green
-BN Green
-TTX Yellow
-ATSF Red
Walthers SceneMaster HO scale Blue wrapped lumber 72 FT - High Cascade
Put your railroad to work moving these Walthers SceneMaster Wrapped Lumber Loads from sawmills to local building suppliers. Made especially for the WalthersMainline 72Ft Centerbeam Flatcars ( 910-4800 series, each sold separately), each is prepainted and lettered in authentic schemes, and snaps easily onto the car to add realistic detail in a matter of minutes.
HO Flatcar w/Logging Crane - CP Rail #304860
(Red, black, Multimark Logo)
This Walthers Trainline HO Scale Flatcar with Logging Crane is great for adding to any freight train on your layout or train set. Trainline freight cars feature RP-25 metal wheels for superior performance on all kinds of track including smaller scale-sized Code 70 and larger rail. With their added weight, body-mounted knuckle couplers, and wheel tread matched to National Model Railroad Association standards, wheels on Trainline rolling stock are compatible with almost all North American HO model railroads and can be used as you expand your railroad. Other features of this Flatcar with Logging Crane include molded details that stand up to handling during operation and realistic paint schemes for good looks.
-Fully assembled, ready to run
-Perfect for use with Trainline Log Dump Cars
-Colorful paint and lettering schemes
-Fully assembled, ready to run
-Use with any HO Scale train set
-Body-mounted magnetic knuckle couplers
-RP-25 metal wheels
HO Scale SD30C-ECO - DCC & Sound - Canadian Pacific #5013
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
HO Post-1960s Cantilever Grade Crossing Signal - Single-Lane
FEATURES:
- Long-lasting LEDs
- Adds animation and realism to model street scenes
- Modern American cantilever-style signals as used in many communities
- Correct scale dimensions
- Install in minutes in new or existing scenery
- Fully assembled, ready to use
- Color-coded hook up wires
- Operate with Crossing Signal Controller (949-4359, sold separately)
Coarse Turf - Yellow Grass - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
HO Scale 89ft Channel Side Flatcar - Trailer-Train/KTTX #155252
(yellow, black; Twin 45ft)
Built especially for the bigger trailers entering service in the 1960s, this Walthers Mainline model of the 89ft channel side flatcar is a must for period intermodal modeling in HO scale. Based on the F89F flatcars owned by Trailer Train and many railroads, over the years these cars carried 28, 40, 45, 48, and 53ft trailers.
FEATURES INCLUDE:
- One time run of these road-numbers, limited quantity available!
- Heavy die-cast metal underframe for great performance empty or loaded
- Used in piggyback and other service 1963 to the present
- Prototypical C-shaped steel channel side sills
- Detailed brake gear
- Swinging coupler pocket for 18 inch radius curves
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Downtown Deco N Scale - First Timer Bar - Kit
HO AutoScenes - Tractor and Planter
Highly detailed and custom painted vintage tractor with planter implement.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
HO Track-Bed - Roadbed Material - 2ft (36/pkg)
Improve the looks and operation of your new or existing layout with Track-Bed(TM). This unique material provides excellent sound-deadening for quieter train operation. It also acts as a shock absorber between the layout surface and the tracks to cushion vibrations. Easily glued or tacked in place, it requires no pre-soaking before installation and will not dry out or crumble over time. Compatible with all applicable NMRA standards for roadbed, it can easily be used with cork or other materials.
HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - GTWI
#85661
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
Plastruct Inc. 2 - Plastic Weld - Plastic Solvent Cement - 2oz (59.1mL)
A colorless, liquid, plastic-fusing adhesive. Dissolves a thin layer of each surface to form a welded joint as strong as the surrounding area. Bonds styrene, ABS, butrate and acrylics.
N Scale Tall Steel Viaduct Tower - Two 4-Story Bents
HO Duplex Sleeper - Great Northern #1162 / Dawson Pass
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x8) .022In x .090In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 2 X 8 LUMBER SIZE IN HO SCALE
HO Class D10k 4-6-0 - DC/Silent - Canadian Pacific #1063
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
HO Slab-Side Covered Hopper - Toronto, Hamilton & Buffalo TH&B #2839
8 Hatch
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
HO AutoFlood III RD Coal Hopper - UP/CMO #504354
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO 1958 Cu Ft 2 Bay Hopper
D&RGW #18416
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
Stainless Steel Hex Nuts 2-56 - 12 pcs.
Bi-Level Auto Racks - Providence & Worcester #104306
All are Ready-to-Run.
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene-
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage.
HO USRA Single-Sheathed Boxcar: Maine Central
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO 40Ft Fruehauf Exterior-Post Volume Van - Western Maryland #A1400
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
Scene Master Heavy-Duty Container Crane - Kit
Product Information
Serve smaller HO intermodal terminals with the new heavy-duty container crane kit from SceneMaster! Similar cranes fitted with container lifting equipment can be found dockside at many ports, and are often called on to handle heavier boxes at bigger facilities. Features of this detailed kit include:
Typical of specially-equipped cranes in use from the 1990s to the present
Detailed cab interior, lattice boom, crawler drive and more
Molded in yellow, gray, black and white plastic
Illustrated step-by-step instructions
Detail in minutes with SceneMaster 20ft and 40ft Containers, available separately
Juneco Scale Models Back Up Light - DPGM Pyle Single w/jewels, plastic (2/pkg)
PS-2 2003 2-Bay Covered Hopper - MILW #99677
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
GATC 20,000-Gallon GS Tank - QLF/GATX #41531
MODEL FEATURES:
- Fully-assembled and ready to run out of the box
- All models are representative of prototypical paint schemes
- Weighted for trouble-free operation
- Body mounted McHenry operating scale knuckle couplers
- 70 or 100-ton Roller Bearing trucks with animated spinning bearing caps per prototype
- 33 inch (70-ton) or 36 inch (100-ton) machined metal wheels with RP25 contours operate on all popular brands of track
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- 3-Packs feature unique numbers not available separately!
- Highly-detailed, injection-molded body
- Separately applied brake wheel and ladders
- Painted and printed for realistic decoration
- Replacement parts available
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Perfect starting point for adding grime and rust
- Faded base colors matched to the prototype
HO GE U50 Diesel - DCC & Sound - General Electric #5000
ETA: July 2023
Detailed Information
GE FEATURES:
Beacon (Flash function in DCC only)
Classification lights (Function in DCC only)
Working Truck lights
Number board lights
Separate see-through air intake grills
MU hoses
Our Legendary Liveries series seeks to explore the -what if- questions that some folks like to indulge in. In the early 1960s GE sent their U25Bs out on demonstration tours around the country in their attractive red and white paint scheme. So, we wondered what if they had done the same thing with the U50? We think that the scheme looks rather striking on this massive beast of a locomotive. So, is your railroad interested in maybe jumping into the horsepower race?
U50 SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated classification lights
Illuminated number boards
See-through air intakes
4-cube speakers
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Four cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO RTR 68Ft Bulkhead Flatcar - Trailer Train TTPX #82037
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
Kit - 4-1/4 x 3-5/8 x 3inch 10.7 x 9.2 x 7.6cm
Typical Modernized Suburban Home Design
Built Coast-to-Coast - Most Still Lived in Today
Detailed Brick Siding
Three Different Front Walls with Appropriate Windows & Doors
Add-on Roof Mounting Pad for Interior Lighting (Available Separately)
Separate Downspouts
Printed Interior Details
Molded in Four Colors & Clear Plastic
HO Dash 8-40CM - DCC Ready - BC Rail: Red/White/Blue #4604
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21015
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Workers: Mailman, Cop, Sailor, Soldier & Engineer
Plastic Compatible Gear Lubricant w/PTFE
LaBelle #102 is an extremely versatile gear lubricant for the exposed gear boxes of model trains!
Its more viscous than a grease and precisely formulated to work better in areas where higher friction heat can be expected to build up, as in bushings and bearings. PTFE has been called the slickest substance known to man. Its the parent chemical of Teflon which is registered trademark of Dupont Chemicals.
HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - Santa Fe (ATSF) #350026
Product Information
Serve a wide range of HO industries with the 37ft 2980 Cubic-Foot Two-Bay Covered Hoppers from WalthersMainline. Based on prototypes introduced in the late 1980s, they can be found hauling cement, fracking sand, roofing granules and similar loads. Features of the layout-ready models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from late 1980s to the present
Separately molded and applied hopper gates
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
HO 60Ft Gunderson 7550 Double Door Boxcar - TTX #664059
MASTER MODEL FEATURES:
All New Tooling!
Separate ladders, hand brake and door rods
Door stirrup, unique to the 7538
Single or double plug door as per the prototype
Roof with 3 Stanray X-panels and 3 diagonal center panels
Brake arrangement offset to A end of body
Crisp, accurate lettering and paint details
Sylvan Scale Models - Diamond T 734 S/A Tractor Resin Cast Kit
Copper Flat Sheet - 0.025inch x 4inch x 10inch
1 piece
Length: 10inch
Width: 4inch
Thickness:0.025inch
HO Greenville 86ft Double Plug Door Box Car - B20 Repaint 1989+ Norfolk Southern #868191
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: October 2021
Norfolk Southern (NW) B20 Repaint 1989+ offers one of our most requested schemes for this boxcar, a Norfolk Southern option. These cars were painted in NS brown paint in 1989 complete with the NS logo stenciling in white. This 1965-built Greenville group features accurate Center-of-Car Cushioning details, a Hydra-Cushion cylinder and truck mounted brake hardware. The B20 class rides on 70-Ton Barber S-2A Roller Bearing Trucks, with 33inch wheels and accurate rotating -Timken- roller bearing caps. As a reminder, N&W was the largest original purchaser of Greenville 86ft auto parts boxcars from multiple eras, and these cars literally went everywhere. These beauties are available with six road numbers!
HO Scenic Accents - Jug Band (8pcs)
A set of six band members. There is a guitar player, a jug player, a banjo picker, a washboard strummer, a fiddler and a man strumming a wash tub bass!
N Scale Modern Tagger Graffiti Decals - Set #14 (10pcs)
Love it or hate it, graffiti is everywhere. We do not condone painting graffiti on real railroad cars, buildings, bridges, etc. and it is against the law. But defacing your model railroad with Blair Lines Graffiti Decals is fun and still legal as far as we know! All decals are reproductions of graffiti found on real railroad cars.
All of these graffiti decal sets are now lasercut! What this means is you will no longer have to trim these decals close. You only have to cut a couple of small tabs and soak the sheet in water. As an added bonus, the decals are now printed on white decal paper making them more opaque!
HO USRA Single-Sheathed Boxcar: D&H
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Athearn Genesis - LED Bulb - Med Length/ Beacon and Strobe 4.75mm pkg(12)
HO RTR Thrall 5-Unit Rebuilt 40Ft Well Car - Trailer-Train DTTX #740757 A-E
(yellow, Large Black & White Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft on both single and five-unit cars. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers - limited quantiuty, order now!
100- and 70-ton roller bearing trucks
Correct 36inch and 33inch RP-25 turned metal wheelsets
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
Proto MAX(TM) metal knuckle couplers
60Ft PS-1 Boxcar - Grand Trunk Western - BCR #383493
Beginning in the 1960s, automakers approached rail carriers with the desire for larger freight cars to transport auto parts from suppliers to manufacturing centers. In response, the 60Ft auto parts boxcar was introduced. Carrying a wide variety of auto components including engine blocks, transmissions, brake drums, and others, these cars were a fixture throughout North America for the next four decades and can still be found in service today. Often times, entire trains of auto parts and related cars could be seen near major production facilities as automakers switched to just-in-time delivery methods, requiring prompt deliveries from the railroads providing service. It was common to see trains consisting of 50Ft, 60Ft, and 86Ft boxcars, specially modified flat cars to carry lightweight chassis, and autoracks all destined for one auto or truck manufacturing facility. As the auto industry supply chains evolved and manufacturing facilities were consolidated, many of the 60Ft boxcars were used in other markets and could be found hauling a variety of goods including appliances, paper goods, cardboard, and similar items.
HO Walton & Sons Lumber Company - Kit
Product Information
The Walthers Cornerstone HO Scale Walton and Sons Lumber Company is a great trackside business in any size city or town. Local lumber yards receive all sorts of building materials in boxcars and aboard flatcars. A great destination for steam- or diesel-era wayfreights, this model builds into a typical operation that fits almost any available space. The storage buildings, which protect lumber from the weather, are designed so that you can build one large, covered building, or two free-standing, open-sided buildings. Theres a small office to handle the paperwork, which can also be placed along a busy street and used as a store and showroom. Lots of colorful sign decals for Walton and Sons Lumber Company and other business names brighten up the operation, and complete instructions make for fast and fun construction. Walton and Sons Lumber is one of many Cornerstone HO Scale industry kits.
Realistic wood-textured plastic walls
Build as a single enclosed building or two open-sided bins
Decal signs
Molded in appropriate colors
Finished Walton and Sons structures measure:
Main Storage Building (Closed Structure): 9 x 9 x 4-1/2inch (22.5 x 22.5 x 11.2cm)
Office: 3 x 4-1/2 x 2-1/2inch (7.5 x 11.2 x 6.2cm)
HO 60ft Flat Car - Southern Pacific #599322
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
Intermountain HO - HTTX Yellow Trailer Train
60 ft Wood Deck Flat Car
Features sharp paint and lettering, wire details, laser-cut wood decks, metal wheelsets and Kadee(R) couplers.
Roof Top Vents Kit (8 pieces)
The Rix Roof Vents are designed to represent many types of vents found on buildings and factories all across the country. The Rix Roof Vents are made so that a variety of different styles can be made. The swivel base allows the vents to remain plum when mounted on a peaked roof.
Kit makes a variety of vents and includes enough parts to produce a total of eight (8) vents. Four (4) swivel bases are also included.
HO ET44 Tier 4 - DCC & Sound - CN/Veterans #3015
Road number 3015 has square exhaust
Road number 3233 has angled exhaust
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
N Scale 3230 Covered Hopper - General American (GACX) #62758
Features:
- All new tooling
- Ready to run
- Injection molded plastic
- Fine scale detail
- Etched metal roofwalks
- Crisp painting and printing
- Magnetic couplers
- Metal wheelsets
The Trinity 3230 Pressure Differential (PD) covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
Bi-Level Auto Racks - BNSF Rack & Flat Car - Circle Logo #300100
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16000
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO GE C30-7 - DCC & Sound - Conrail #6603
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AWWX #4621
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 40Ft Wood Reefer - UTRX #11629
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch
HO Scale - 1937 Studebaker COE Beverage Truck - Unpainted and Resin Cast Kit
HO RTR Trinity Rail 3281 Cu Ft 2-Bay Covered Hopper -Holcim (US) GNAX #2613
(2020s, gray, yellow conspicuity marks, DJ Joseph Log
Product Information
This HO Scale TrinityRail 3281 Cu.Ft. 2-Bay Covered Hopper is based on a common late-1990s and later prototype commonly used to haul frac sand, roofing granules and similar materials. With the boom in frack sand traffic it isnt uncommon to see these prototypes used in unit trains. Prototype cars measure 41ft-11inch long, and the cars are equipped with three or five round loading hatches and a pair of gravity outlets for commodity off-loading. Compared with earlier 2-bay covered hoppers, these cars are distinctive. Notably, an overhanging arched roof, heavy top reinforcement stiffener, and folded jack pads at the bolster are spotting features for the Trinity 3281. This design has proven to be popular with shippers and railroads alike. The HO scale freight car features an injection-molded body, applied wire grab irons, photo-etched walkways and working shelf-type knuckle couplers without trip pins for scale appearance. Other details include roadnumbers printed on the truck sideframes, coupler cut levers, NMRA compliant car weight, trucks with spinning bearing caps, multiple roadnumbers per scheme and graffiti on select roadnumbers.
HO Master MP-36 - DCC/Sound - West Coast Express #906
Features:
- Golden-white LEDs
- Realistic die-cast underframe
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Realistic lighting effects including ditch lights and in-cab light
- Metal knuckle couplers
- Detailed cab interior
- Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
- Coupler cut levers
- Multiple unit hoses and trainline hoses
- Recommended 22 inch radius with Atlas passenger cars
DCC Ready Units:
- Equipped with a speaker for easy conversion to sound with the addition of a decoder.
DCC ESU LokSound Functionality Features:
- Over 20 sound effects are available including Head-end Power (HEP), engine start-up and shutdown, prime mover sounds through all eight
notches, bell, air horn, air compressor, dynamic brakes and more.
- There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
Microscale MI-12 Liquid Decal Film 1oz
Everyone should have Micro Liquid Decal Film who models and uses decals. Especially if you have been at it for some time. The typical decal scrap box is not the best place to store decals. Exposed to air, sunlight, and moisture, great swings of temperature or general abuse, and decals will go bad. Or maybe you just always had trouble putting on thin stripes. Micro Liquid Decal Film solves all of those problems and makes a decal which for whatever reason is bad, work again just like new almost immediately. Of course if you have already put it in water it is too late. So if you have some old decals you really have to use, coat them with Micro Liquid Decal Film to be sure. Or if there is any indication that you might have a problem, dont take a chance, you can solve the problem on the spot. Simply take a small brush and coat the image on the decal you want to use. Allow to dry for 20 minutes. Apply the decal as usual. Its that simple.
Expand container traffic on your 1960s and 70s era HO layout with this series of authentic models from - SceneMaster, featuring:
- Standard end-door and right-side door versions as appropriate
- Authentic rivet, door latch and hinge details
- Colorful period schemes
- Perfect period loads for WalthersMainline G85 and 60ft Pullman-Standard VTTX container flatcars (each sold separately)
Trinity 3230 Covered Hopper - Chicago Freight Car #3089
FEATURES:
All new tooling
Ready to run
Injection molded plastic
Fine scale detail
Separately applied wire grab irons
Separately applied wire cut levers
Etched metal roofwalks
Crisp painting and printing
HO USRA Single-Sheathed Boxcar: Ann Arbor
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
50Ft Smooth HC Plug Box - BNSF/Round Logo #712702
Detailed Information
MODEL FEATURES:
Former MDC tooling
Brand new paint schemes
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Separate brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister safely holds model for convenient storage
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of -In Service- equipment; -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per road number matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
New Motor Mount Screw (24pcs)
N Work Shed - Built & Ready Landmark Structures - Assembled
Dimensions:
1-1/4 x 1-1/16 x 1in
3.2 x 2.7 x 2.5cm
HO GE 44 Tonner Phase III Body - DC/DCC Ready - Undecorated
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
HO 40Ft Hi-Cube Dry Containers - Ocean Network Express (ONE Pink) (3pk) Set #2
3 pack road numbers include : ONEU 017197/020297/020347
Body: Type A
Door: Type B
Latch: Type A
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
Extension Cable Kit
Use with Extension Wire to create custom lengths of Just Plug Cables. Reach Hubs anywhere on your layout or project.
HO RTR 68Ft Railgon Gondola - Railgon GNTX #290058
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
N Scale Curved Track - 15-Degrees - 19 Inch Radius (4pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO EMD F40PH - DCC & Sound - VIA Rail Canada #6422
Product Information
Power your favorite Amtrak(R) or regional commuter trains in style with a WalthersMainline F40PH on the job! Built especially for passenger duties, the prototypes entered service in 1976 and many are still going strong today. Based on Phase 2b prototypes, the models feature:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed vertical hand rails
Molded drill starter points for grab irons (sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Fully assembled
21mtc connector
ESU Sound for DCC and DC layouts featuring:
- 4 function outputs with brightness control by CV
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch prime mover sounds
- Compressor
- Dynamic brake
Same powerful drive as WalthersProto(R) locos featuring
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Heavy die-cast metal chassis
- Constant and directional LED lights
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
Alternate horns and bell sounds can be programmed on the sound decoder using these CVs:
Horns: CV163 = 0 - Nathan K5LH (default)
CV163 = 1 - Nathan K5HLL
CV163 = 2 - Nathan K5H
CV163 = 3 - Nathan K5LLA
Bells: CV164 = 0 - Graham White E-Bell (default)
CV164 = 1 - GE Steel Bell
20Ft Corrugated Containers with Corrugated Doors, American Presidents Line 2pk
3062906(0) and 367086(0)
HO Relay Cabinets & Phone Boxes (7pcs)
Bring your HO Scale steam- or diesel-era railroad to life with these ready-to-use accessories from SceneMaster! In the days before railroad radio was common, trackside phone boxes could be found at key locations along the tracks where crews might need to call the dispatcher. Relay cabinets provided secure and easy access to electronics controlling signals, grade crossing protection and more. Ready to install, this set is complete with three cabinets and four phone boxes.
HO 89ft Thrall Bi-Level Auto Carrier - Burlington Northern/TTGX #150798
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
N Scale 3-Dome Tank Car - Ambrose Wine Inc.
These specialized cars were actually three complete tanks riding on one frame. They could be used to ship different types of petroleum products, such as gasoline, kerosene and home heating oil, or different grades of gasoline such as regular, super and premium to smaller customers from the 1920s to the 60s.
Colorful and completely assembled, the models feature body-mounted EZ-Mate II knuckle couplers.
Peco Code 83 SL 8377 Streamline #7 Insulfrog Turnout - Nickel Silver Left Hand Curved HO Scale Track
Shipped from Ontario Canada
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1814
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Red
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
PSC Transfer Van - Canadian National #76595
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
HO Stirrup Steps (Style B) - 25pcs
Repair or update your entire freight car fleet quickly and easily with formed brass HO Scale A-Line Stirrup Steps. Available in three styles, they offer the perfect balance between prototypical appearance and durability on virtually any freight car.
85ft General American G85 Flatcar - Trailer Train - New Haven #16034
Product Information:
Limited edition - one time run of these road numbers
Prototypes handled trailers and containers from 1961 to mid-1980s - used for general service loading into the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in up or down position or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
33In turned metal wheelsets
Proto MAX metal knuckle couplers
Add more realism in minutes with SceneMaster trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24In
HO ACF 4600 3-Bay Centerflow Hopper - Gulf Mobile & Ohio (3 pkg) #1
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
HO 40ft ACF Modernized Welded Boxcar - Green Bay & Western #611
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO EMD SW900 - LokSound 5 Sound & DCC - Lehigh Valley #121
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- ESU LokSound 5 sound for DCC and DC layouts
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
HO Straight Track Sections - 9 3/4in (246mm) (4/pkg)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes!
Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation.
Suitable for all types of layouts, temporary or permanent, this modular track system features an integrally molded roadbed for realistic appearance.
Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
1:87 CAT 450 E Backhoe Loader
Details:
1:87, Backhoe Loader
Dimensions:
4⅜ x 2¼ x 1⅞ in
110 x 56 x 47 mm
HO 40Ft Hi-Cube Dry Containers - China Shipping (3pk)
3 pack road numbers include : CCLU 708767/708800/708953
Body: Type A
Door: Type A
Latch: Type D
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
HO 40Ft Drop Sill Parcel Trailer - UPS/ Red #87612
Detailed Information
MODEL FEATURES:
Painted wheels
Rubber tires
Fully-assembled and ready to use out of the box
Painted and printed for realistic decoration
Officially Licensed UPS Product
DC/DCC/Sound - Alco FB-2 Penn Central (ex-NH) #3393
FB-2 and FPB-2 models feature:
Operating back up lights. As appropriate.
Roadname specific details with or without dynamic brakes. As appropriate.
The only HO scale Alco/MLW B unit with accurate phase details including vertical or horizontal battery box louvers and etched metal Farr or mesh side grilles.
Canadian or American cast Type B trucks. As appropriate.
Full underbody piping and conduit.
Correct roadname and manufacturer specific FB-2 and FPB-2 fuel tanks.
New York Central features:
Phase 2 body with horizontal battery box louvers and Farr grilles.
Dynamic brakes
Alco welded fuel tank
GSC cast Type B trucks
HO EMD SW1200 -DC/Silent - Penn Central (ex NH) #9192
(Flexicoil Trucks)
Note: #9186 will NOT feature the larger Penn Central lettering on the hood.
The HO Scale Rapido SW1200 features:
- Designed from original blueprints and field measurements
- Heavy diecast frame, chassis and gearboxes for superior pulling power
- Rapidos renowned silky smooth-running drive system
- Working cab interior light and inspection lights
- Fully detailed Type A or Flexicoil trucks, as appropriate
- Full cab interior with working cab interior light and non-working fire extinguisher and fridge (where appropriate)
- Working headlights and illuminated number boards at both ends
- Some models have a rotary beacon or flasher/strobe as appropriate
- Separate handrails, including crash bars inside the cab
- Multiple exhaust stack and battery box door styles
- With or without working drop steps, as appropriate
- Incredible underbody piping and conduit detail - a Rapido hallmark!
- DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings from a 567 prime mover
HO ACF 2970 Covered Hopper - CSXT #220634
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons, stirrup steps and brake wheel
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Screw-mounted express-type trucks
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
N Scale Black 4-Wheel Passenger Car Trucks w/adj.couplers (1pair)
4 wheel passenger car trucks with assembled, adjustable Magne-Matic(R) couplers.
N Scale 50Ft Boxcar w/ 8Ft Plug Door, No Roofwalk, Short Ladders - Baltimore & Ohio #482760
(Class B-74A, blue, yellow, Script Lettering)
Product Information
This ready-to-run N Scale 50Ft Boxcar with 8Ft Plug Door, No Roofwalk and Short Ladders from Micro-Trains features an injection-molded styrene body, a heavy die cast lowered underframe for realistic ride height, free-rolling Delrin(R) trucks with contoured axles and body-mounted Magne-Matic(R) magnetic knuckle couplers. Other features include detailed separate fine-profile foot stirrups, shortened ladders and brakewheel. Patterned after cars introduced in the 1950s and modernized in the 1960s and 1970s as roofwalks were removed for increased safety, this 50Ft Plug-Door Boxcar is an ideal addition to diesel-era freight consist. Check out the entire line of Micro-Trains N Scale freight cars.
3/16 inch OD Round Aluminum Tube 0.014inch Thick x 12inch Long
Round Aluminum Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 3/16 inch
Walthers HO Scale Main Street Cleaners Kit
5 x 4-7/8 x 5-1/2in
12.7 x 12.4 x 14cm
Product Information
Keep those suits and dresses looking like new when you have them taken care of at Main Street Cleaners Designed for simple snap-together construction with little or no gluing needed, window mullions are molded into glass for true to scale appearance. Parts are also molded in realistic colors so no painting is needed. Other features include:
Perfect for rural store or city business
Walls and trim molded in realistic colors as one complete part - no painting needed!
LED interior lighting included
Simple snap-together construction with minimal gluing
Window mullions molded into glass for true to scale look
Perfect for steam, diesel and modern layouts
Classic wooden structure
Full-color printed drapes and window detail sheet
Sign decals for four different businesses
Molded in two colors and clear plastic
HO EMD MP15AC Diesel - DCC & Sound - GMTX GATX #335
GMTX FEATURES:
Ground lights
Road number specific features
Front and rear ditch lights
Cab-mounted A/C
GATX operates a fairly large lease fleet of locomotives to help service any railroads needs. We are offering full repaints from a range of different schemes used. Being leased as needed, these locomotives could be seen used all over the country, including Mexico and Canada.
ROAD NUMBER SPECIFIC FEATURES:
#319 Ex-SOO/MILW, All black repaint, cab-mounted 3-chime horn, frame-mounted bell, dual Xenon strobes (effect in DCC), small fuel tank, ratchet brake
#333 Ex-SOO/MILW, Light blue/black repaint, cab-mounted 3-chime horn, frame-mounted bell, dual Xenon strobes (effect in DCC), small fuel tank, ratchet brake
#335 Ex SP, Dark blue/black repaint, cab-mounted 3-chime horn, SP style number boards, blanked SP light package, frame-mounted bell, large fuel tank, brake wheel
MP15AC LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Lift rings
Windshield wipers
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Operating ditch lights (if equipped)
Operating ground lights
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and -printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - PTTX #93436
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
#10 Knife Blades, 5 Blades
1. #10 Blade - General Purpose Blade
The X-ACTO #10 General Purpose Blade is a unique blend of precision and durability. This extremely versatile, general purpose blade can perform a variety of functions from heavy duty cutting and carving to careful slicing and trimming. If you are only going to buy one cutting blade, we recommend this one.
The #10 General Purpose Blade from X-ACTO works with a large variety of medium and lightweight materials:
Light cardboard
Vinyl
Rubber
Foam
Plastic
Soft woods
And more
1956/72 IHC-190 Tandem Tractor - Unpainted and Resin Cast Kit
LED Replacement - No Lens/Deck Mount Ditch Light (12)
HO 50ft Evans Double-Door Plug Boxcar - Wisconsin Central #1003
MODEL FEATURES
-Fully assembled and ready for your layout
-Separately applied end ladders, brake wheel and underbody details
-Weighted for optimum performance
-Machined RP25 profile 33in metal wheels
-McHenry scale knuckle spring couplers installed
HO 40Ft Standard Height Container - China Shipping (CCLU) Set #1
FEATURES:
40Ft based on corrugated design with logo panels
All containers feature opening doors
Accurate painting and lettering
3 pieces per set
HO FGE 57Ft Mechanical Reefer - DCC Ready - SFLC #1834
Detailed Information
57Ft MECHANICAL REEFER FEATURES:
Available with onboard SoundTraxx sound
Scaled from prototype manufacturers drawings and field measurements
Repaints often vary by road number in the size and style of the reporting marks, car numbers and patch shapes
See-through protective screens on the genset end
Detroit Diesel 2-71 Genset visible inside
End wall corrugation visible inside
Inner refrigerator bulkhead
See through end platforms
Two different exhaust stack types: straight pipe with -flapper- or T-shaped -smokejack- per prototype and era
Full underframe detail including Keystone cushioning, air brake reservoir, control valve, brake cylinder, brake plumbing, and fuel tank
Factory applied end ladders and door closure rods
Trainline hoses with silver ends
Three different coupler cut lever styles per prototype
Body-mounted or truck-mounted brakes per prototype
McHenry operating scale knuckle couplers
100-ton roller bearing trucks with rotating bearing caps
Fully-assembled and ready-to-run
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Machined metal wheels with RP25 contours
Weighted for trouble-free operation
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
Tangent Scale Models HO PS4750 Covered Hopper RREX- Klemme Coop Iowa 4-1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
RREX -Klemme Coop Iowa 4-1979- is our private grain elevator selection in this release of PS4750s. This car is a stunner and our next pink Iowa coop offering, with large Klemme Coop lettering and the smaller Klemme, Iowa underneath. This is a very sharp looking car and goes well with our previous pink car offerings! Details include accurate body-mounted brake hardware with center-tube linkage and Miner Selflok outlet gates.
HO Parkview Terrace Background Building - Kit
FEATURES:
- Designed for use between scenery and painted or printed background
- Easily add depth between rearmost tracks and your backdrop
- Easy-to-build plastic kit
- Great for steam or diesel-era layouts
- Brick three-story building back
- Detailed wooden stairways with landings
- Fits 1920s to present layouts
- Molded in appropriate colors
MEASUREMENTS:
7-3/4 x 2-3/16 x 6 inches
HO Custom Air Compressors (2pk)
Pre-painted and labeled upright air compressors.
HO RTR ACF 4650 3-Bay Hopper - SOO Line #74213
Date: BLT 11-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO GE Dash 9-44CW - DC/DCC Ready - Canadian National CN #2510
CN FEATURES:
Canadian 4-window cab with high-mounted number boards
K3 horn
Front ditch lights
Front class lights
Rear single style headlight
Cab-mounted brass bell
Canadian National purchased 23 safety cab Dash 9 locomotives from GE in late 1994. Classed as -C44-9WL-, these locomotives were seen all over the system and featured a 4-window Canadian style cab, front and rear anticlimbers, and single rear headlight.
ROAD NUMBER SPECIFIC FEATURES:
#2506 Later appearance with right side yellow number board numbers and missing left side -American Continent- map art
#2510 As-delivered appearance
#2522 As-delivered appearance
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
9/32 inch OD Round Brass Tube - 0.029inch Thick x 12inch Long
Round Brass Tube (1 pc)
Outside Diameter: 9/32 inch
HO SD70ACU - DCC Ready - Norfolk Southern #7300
ETA: October 2023
Detailed Information:
NS FEATURES:
Nathan 5-chime horn
Large plow
Alternating flash ditch lights on both ends (Function in DCC)
In 2016, NS started an ambitious rebuild using ex UP SD9043MACs as cores. The rebuild included upgraded computers and electronic brakes, engine and main generator overall, and new EMD cab. NS designated them as SD70ACUs.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
HO Signal - Hooded Modern (Double Head-Right)
VIA Rail HEP2 Coach Scheme (1996 to Present)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - TROX #3532
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Scale 70-ton Freight Trucks w/Roller Bearings (1 pair)
WHEELSET FEATURES:
- Accurate turned metal construction
- Insulated on one side
- Blackened
- Non-magnetic
- RP-25 flanges
Our semi-scale wheels feature a narrower tread but with an RP-25 flange for maximum compatibility with commercial track products. These will drop right into most HO scale trucks for a visual and operational improvement!
N Scale Ice House & Icing Platform - Kit
Product Information
The Walthers Cornerstone Icehouse and Icing Platform brings back the heady days of railroading when fast freights forwarded meat and produce to market in ice-cooled reefers. From the 1880s to the 1970s, ice-cooled reefers were a fixture of railroading. Solid trains raced across country with their perishable loads riding in long strings of refrigerator cars. Supplying ice for the cars in transit was a huge industry. Railroads built ice houses and platforms, like this kit, about every 250-300 miles. Here, entire trains could be serviced and on the move in minutes. This complete kit includes a detailed icehouse, based on a prototype in Antigo, Wisconsin, plus a modular icing platform, from a Pacific Fruit Express design. Lots of add-on details, including an optional platform roof (used in warm areas to shade ice and slow melting), roof vents and 24 ice blocks are included. The plastic parts are molded in color for easy assembly and complete instructions are provided.
As shown the Icehouse and Icing Platform kit measures: 9-7/8 x 3-3/4inch (25 x 9.5cm)
Prototypical wooden icehouse
Found along railroads from the 1800s to the 1970s
Icing platform includes optional canopy
24 ice blocks
Molded in appropriate colors
N Scale 2-Bay Hopper - ATSF #82142
These GA-105-class covered hoppers with Bettendorf trucks were built in 1957 in a series of 500 cars.
HO EMD GP40 - DCC & Sound - SSW/ Cotton Belt #7600
1966+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
G2 SD70M-2 - DCC & Sound - Providence & Worcester #4302
Genisis 2.0 Features:
See-through pilot steps, Lit Marker Lights (CN)
LIT numberboards & ground lights
Detailed Information
P&W NOTES:
P&Ws two units were originally painted orange and brown and ran for several years in this guise.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Etched see-through steps
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Scenic & Weathering Techniques - Softcover Book
Leading off our new Master Craftsman Series of how-to books, Scenic & Weathering Techniques is your guide to creating realistic effects for your model railroads and dioramas. Compiled by Scott Thornton, more than a dozen authors contribute all-new articles to teach you expert techniques that will bring you to the next level!
Featuring:
Rob Arsenault
Butch Eyler
James Hilton
Tom Johnson
Matthieu Lachance
Erik Lindgren
Jeff Meyer
Neil Schofield
Rob Spangler
James A. Powell
? and more!
HO Merchants Row 2 - Kit
Kit - 10 x 5 inches (25.4 x 12.7cm)
City models made easy! This kit brings together five different stores in one structure at a dynamite price.
Often just a few blocks away from the railroad tracks, the business district is one of the most important parts of any small town or big city. This unique kit combines five stores with one space-saving structure that fits on almost any size layout. Add your personal touch with paint and the full-color decals to create a one-of-a-king model for your steam- or diesel-era scene.
HO 36ft Old-Time Wood Boxcar - Chesapeake & Ohio #5688
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127499
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
Tru Color Paint 157 - Acrylic -SOO Off White 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Code 100 Nickel Silver DCC-Friendly #6 Turnout - Right Hand
Track is the most important model on your HO layout, and Walthers Track makes it easy to create realistic mainlines, sidings, and more! Combining great looks and great performance, each Code 100 item comes fully assembled and features:
- Thin profile ties in realistic dark brown with enhanced wood grain detail
- Fine profile molded spike and tie plate details on each tie
- Spike-mounting holes positioned next to the rail
- Molded starter points on underside of ties for center spikes
- Custom formulated nickel silver rail for improved electrical conductivity
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #1122
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Woodshop Equipment - 5 pcs
Perfect for detailing an HO garage workshop, lumber yard or small industry, this SceneMaster Woodshop Equipment kit is complete with a jointer, large table saw, planer, disc sander and band saw, all molded in gray plastic. Makes a great load in the back of a truck too!
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
G (1:24) Custom Straight Staircase (1pc)
Use in interior applications where a closed casing is desired. Combine with other staircases to achieve many configurations. Precision Injection Molded in Styrene Plastic. ASSEMBLY REQUIRED
SCALE
G
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
19/64In
HEIGHT IN MM
7.5mm
WIDTH IN INCHES
1-9/16In
WIDTH IN MM
39.7mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
7-1/2In
LENGTH IN MM
190mm
HO GP40 - Gold DCC & Sound - CSX (MOW) #9720
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
HO Bi-Level Auto Rack - Western Pacific/Trailer Train Flat Car #915212
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
Hood-Side Mount Bells (2/pkg)
- GE and other hood units.
HO - Siemens ACS-64 - DCC & Sound - Amtrak #619
Features:
DCC sound-equipped ACS-64 includes a TCS WOWSound CD-Quality 16-bit 44,100Hz decoder with Audio Assist
Sounds package includes: horn, bell, cooling fan/power inverter, pantograph extension and retraction, coupler close/release, brake release and application, momentum, crew alert, grade crossing quill, departing and arriving station announcements, and more
Keep-Alive device for uninterrupted operation, even over dirty track and remappable light functions, die-cast frame, and selector switch for choice between rail and pantograph operation.
Performs best on 22inch radius curves or greater
HO Scale 1:87
Product Measurements: L 9.5 in., W 1.5 in., H 2 in.
Retail Package Measurements: L 12.5 in., W 2 in., H 3.5 in.
Alco RS-11, 2nd Run - Diesel Locomotive - DCC Ready - Maine Central - Pine Tree #801
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO GE 44 Tonner Phase Ic - DC/DCC/Sound - Rio Grande (Black & Yellow) #42
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
Tsunami 2 TSU-2200 Digital Sound Decoder for EMD 2 Diesel
Dimensions: 35 by 18 by 6mm Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output) Function Outputs: 6
Audio Amplifier: 2 Watts, 8-Ohm Load DCC Track Voltage: 7.5V – 22V
Speakers
The TSU-2200 is a universal 2-amp Digital Sound Decoder. It is suitable for a wide variety of models from HO to S scale, and includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Not included
EMD 567 No Transition 0 EMD 645 Turbo 5
EMD 567 Non-Turbo 1 EMD Dual 645 Turbo 6
EMD 567 Turbo 2 EMD 710 Turbo 7
EMD Dual 567 3 EMD 710 G3C-T2 8
EMD 645 Non-Turbo 4
CV 124 Air Compressors CV Value CV 124 Air Compressors
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #33
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO 59Ft Cylindrical Hopper - Scoular SCOX #1536
(yellow, brown, green; Double-Corn Logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
One time run of these roadnumbers, order now - limited quantity available
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
Athearn Roundhouse HO 50ft ACF Boxcar FEC #23099
MODEL FEATURES:
70-ton Roller Bearing trucks with 33in wheels
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Body mounted McHenry operating scale knuckle couplers
Wheels with RP25 contours operate on Code 70, 75, 83, 100 rail
Minimum radius: 18in
Specifications
COUPLER STYLE: McHenry Scale Knuckle
HO - Nathan K3 K3LA 3-Chime Air Horn - Lost Wax Brass Casting
HO Code 83 Nickel Silver Rail Only - Weathered 3ft (33pk)
HO 60ft NSC 5150 3-Bay Covered Hopper - Cargill (ICMX) #1007
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO GE Dash 9-44CW - DCC & Sound - Quebec, North Shore & Labrador QNSL #413
QNSL FEATURES:
Front and rear marker lights (fully functional in DCC mode)
Low mounted number boards
K3 horn
Front ditch lights
Standard brass bell
Purchased in 1998 to help replace their aging fleet of older EMDs, Quebec, North Shore and Labrador turned to GE for 11 new high horsepower Dash 9 C-44CW locomotives. Painted in a bright orange and yellow scheme, these units were used in heavy iron ore service along the north shore of Quebec, Canada.
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Mo Skeeters Bait & Tackle - Assembled
Stop at Mo Skeeters for all your fishing necessities. This rustic shop has a weathered metal roof, narrow clapboard siding and a covered front porch. The fully assembled model comes complete with signage, live bait tank, fish cleaning table, fish nets, a barrel of cane poles, a fisherman figure and more.
HO 36ft Old-Time Wood Boxcar - Cotton Belt #16797
HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (Two-Tone Gray) #7023
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Canadian National Atlantic Region In Color
By: Bram Bailey
Released June 1, 2020
Kicks off with the Canadian Nationals RSC-14 program where 38 RS-18 locomotives were modified with six-wheel trucks for operation on the light rail branch lines typical of those in the Canadian Maritimes. Canadian National operations in the provinces of New Brunswick, Prince Edward Island and Nova Scotia are featured in photos between the late 1970s - mid-1990s. If youre an Alco or MLW fan, this title is for you!
HO SD60I Wide Cab Diesel - DCC & Sound - Terminal Railroad Association #4001
Expected in May 2022
Detailed Information
TRRA FEATURES:
Ex-CR
Isolated Cab
No plow
Small PTC antenna setup
Front ditch lights
Electronic-style bell
Acquired in 2020, these two ex-CR units were purchased and painted into this bright and attractive scheme to operate near the TRRA headquarters in St. Louis, MO.
LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully-assembled and ready-to-run
Replacement parts available
Minimum radius: 18inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO RTR Trinity RAF 33C 3-Unit Spine Car - Trailer Train TTAX #355165
Features
-Ready-To-Run
-Die-Cast Metal & Plastic
-Fine-Scale Detail All Around
-Chemically Etched Walkways
-Accurately Painted/Printed
Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- IC
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Illinois Central (IC) -Delivery 2-1970- is a hot car, no matter how you look at it. That orange paint
coupled with the sharp black and white split-rail logo is one of the most iconic schemes for that era. The IC cars feature their as-built 1970 appearance that includes Gypsum crossover platforms, Ajax brake hand brake housing, Greenville-applied tack board locations and that beautiful End-of-Car Cushioning underframe setup. The paint, lettering and graphics are truly Tangent Accurate from the large, centered Illinois Central lettering down to the distinctive IC-style dotted return route box with instructions to send the car back to the GTW in Flint, Michigan. 70-Ton Trucks with 33in wheels and rotating Timken roller bearing caps finish off this Mainline of Mid-America offering. Our IC masterpieces are available in four different numbers.
HO 50ft PS-2 CD 4427 Covered Hopper - Santa Fe/ATSF #303134
Add a signature car to your covered hopper fleet with the Walthers Mainline 50ft Pullman-Standard PS-2 CD 4427 3-Bay Covered Hoppers!
Fully assembled and finished in a variety of colorful schemes perfect for 1960s to early 2000s layouts, features include:
-Limited edition - one time run of these car numbers!
-Prototypes handled all types of grains, feed and similar loads
-Matches prototype dimensions
-See-through running boards
-4-3-4 exterior rib pattern
-Bottom outlet gate details
-Placard name plates as appropriate
-Correct 36in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO Alco FA-1 - DCC & Sound - Union Pacific #1609
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
1951 Hudson Hornet 2 Door Coupe- Unpainted and Resin Cast Kit
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .219In x 14In (3 pcs pkg)
X-2F Horn-Hook Couplers, pkg(12)
Walthers Cornerstone Horn-Hook Couplers are direct replacements for the older-style X-2F couplers in Walthers rolling stock kits. Couplers are molded in Delrin(R) plastic. Horn-Hook Couplers will not couple to knuckle couplers.
Fits rolling stock with older-style horn-hook couplers
Direct replacement for couplers in Walthers rolling stock kits
Molded in Delrin(R) plastic
12 per pack
HO Enterprise 2-Bay Covered Hopper - GFCX (6pkg) #1
6-Pack includes the following numbers, all individually packaged: #101, #104, #110, #115, #128, #134
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
Bi-Level Auto Racks - Providence & Worcester #190062
All are Ready-to-Run.
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene-
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage.
N Scale 52Ft Mill Gondola - Wisconsin Central #54196
Detailed Information
MODEL FEATURES:
Body-mounted McHenry knuckle couplers installed
Fully assembled and ready for your layout
Screw mounted trucks for accurate tracking
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO 40ft 16K Gallon Tank Car - Corn Products Corp/CCLX #1301
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO ALCo RS-3 - DCC/Sound - CP (Script) #8441
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
ITLA ScaleModels Inc HO 4157 York Industries Inc
Configurable into Multiple Build Combinations
walls can be arranged can be arranged in at least 12 combinations to fit your layout needs
3D laser etched detailed surfaces on every wall
Basic L-Shaped dimensions are 6in L x 4.75in W x 5.5in H
This kit will also stretch into -Shallow Relief- and -Full Flat- formats up to 18.25in L x 0.5in W x 5.5in H
HO CA-9 ICC Caboose w/Lights w/DCC & Sound - Union Pacific #25661
ETA: August 2021
Detailed Information
PROTOTYPE AND BACKGROUND INFORMATION
Built by International Car Company in 1967, UPs CA-9 class numbered 100 cabooses. The cars were very similar to the earlier CA-8 and later CA10 designs, but had minor differences in end cages and windows. The cars originally featured square safety slogans, and these were later changed to rectangular slogans. The eye-catching safety slogans made the cars distinctive; the later slogan boards were removable and could be swapped from car to car, meaning that certain road numbers wore several over the course of their lives.
ROAD NUMBER SPECIFIC FEATURES:
#25658, 25668, 25661 Early slogans, P on cupola representing Pool service,unique scheme with 14 inch reporting marks and 8-inch -Union Pacific-, as- built or modernized cupola windows as appropriate
#906251 MOW Office car, painted -Kenefick green,- Era: 1990s+
#25629, 25616 Later rectangular slogan boards, red P on cupola representing Pool service, modernized windows, Era: late 1970s+
HO U30C Phase 1 Gold - DCC & Sound - Delaware & Hudson #701
MASTER MODEL FEATURES:
Adirondack floating bolster trucks with or without bearing caps as appropriate per railroad
Coupler pocket designed to accept AccuMate Proto-couplers
Golden-white LEDs
Antenna detail where appropriate per road name
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Directional lighting
With or without nose headlight as appropriate per railroad
Non-operating cab roof-top beacon detail where appropriate per road name
Detailed crew members
Marker lights with separate lenses
Snowplow
Separately-applied drop steps
Recommended radius: 22inch
ANALOG (DC) OPERATION FEATURES:
Please note that the Atlas Quantum Engineer will NOT operate an Atlas Gold Series locomotive equipped with a LokSound Select decoder on an analog (DC) layout. However, the sound and lighting functions of the LokSound Select decoder in the Atlas Gold Series U30C locomotive can be controlled by an easy-to-use basic DCC system
Also note that on a DC-powered layout, a DCC and sound equipped locomotive (such as the Atlas Gold Series U30C) CANNOT be consisted with another locomotive that does not
also have both DCC and sound. (This statement does NOT apply to DCC-equipped locomotives operating on a DCC layout.
Sound Functionality Features (Gold Models with ESU Sound Only ):
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals. Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided for true realism.
DCC OPERATION FEATURES:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
A total of six DCC function outputs are available
Follows all NMRA DCC standards and recommended practices.
Note: Due to the higher starting voltage required to operate the sound system, it is not possible to MU a non-sound-equipped loco in DC (analog) mode
HO 40Ft Ortner 100-Ton Open Aggregate Hopper - Blue Circle Cement WBCX #73018
Product Information
Move heavy bulk loads for your railroads customers with a fleet of WalthersProto 40Ft Ortner 100-ton Open Aggregate Hoppers. Highly detailed and fully assembled, other features include:
One time run of these roadnumbers, order now - limited quantity available!
Distinctive high-sided design in service from 1970s to present
Prototypes used for hauling heavy aggregates including limestone, iron ore and taconite pellets, gravel, sand and more
Factory-installed air-equipped door details as appropriate
Factory-installed wire grab irons and end railings
Removable load included
Detailed brake gear
Weighted for excellent tracking
Ultra-smooth rolling metal axles and RP-25 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - CIL Monon #9002
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
N Scale Dash 8-40CM - DCC & Sound - Canadian National: Stripes #2423
Our N Scale Dash 8-40CM model features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
Heavy, die-cast chassis with a powerful motor and dual flywheels
Operational headlights and rear lights with operational factory-installed ditch lights (plus rock lights on BCOL locomotives)
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
Factory-installed couplers mounted at the correct height
HO 53Ft Gunderson Husky-Stack Well Car - Canadian Pacific (2pkg) #527050, 527188
Does not include containers
Road Numbers Include:
527050
527188
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
Service Van - Ambulance
Expected Delivery: March 2020
At the curb or on the job, add color and variety to your HO vehicle fleet with SceneMaster Service and Delivery Vans!
Based on contemporary designs used by all kinds of businesses big and small, youll also find them in the ranks of the fire and rescue service.
Factory painted and printed in full color, the finished models look great on layouts and in collections.
Highly detailed, perfect for layout or collection
Each also includes modeler-applied side mirrors for more realism.
3/8 inch OD Round Aluminum Tube - 0.035inch Thick x 12inch Long
Round Aluminum Tube (1 pc)
Outside Diameter: 3/8 inch
HO Enterprise 2-Bay Covered Hopper - Canadian National (MOW Red) #53315
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
N Scenic Accent Figures - Children
Double Lamp Post Street Lights - 3 sets
Use to light street corners, sidewalks, parks and more. 20mA/set RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 0.484 in w x 2.76 in h (12.3 mm w x 70.1 mm h)
HO F89-F Bi-Level Auto Rack - Illinois Central/BTTX #930360
Detailed Information
MODEL FEATURES:
Die-cast underframe
Authentic undulating safety railing
Accurate Whitehead and Kales Auto Rack
Early or late train lines and cut levers per prototype and era
Customer installed end bridge plates (included in box where applicable)
Detailed deck
Wire-formed brake plumbing
Separately applied hand brake per prototype
Separately applied wire grab irons where applicable
Prototypical ride height
70-Ton roller bearing trucks with animated rotating bearing caps installed
Trucks with animated rotating bearing caps
Minimum radius: 22inch - Recommended radius: 24+inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
N Scenic Accents(R) Figures -- Garage Treasures pkg(13)
HO 16,000-Gallon Clay Slurry Tank - SHPX #201971
MODEL FEATURES:
- Separately applied fittings nozzle, manway, and small safety valve nozzle
- See-through Photo-etched metal walkways and end platforms
- Full brake plumbing and rigging including brake wheel, air reservoir cylinder, triple valve, brake linkage, trainline, brake rod, large brake
- Printed marking on the sides, ends, and top of the tank body
- Fine scale side ladders
- Placard holders
- Printed marking on the sides, ends, and top of the tank body
- Equipped with McHenry AAR upper/lower shelf couplers
- 36 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Multi-packs feature unique road numbers
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Kaolin, a fine white clay, is produced by the natural chemical weathering of aluminum silicate minerals such as feldspar. Mined in the southeast United States (primarily Georgia and Florida), kaolin is used in the manufacture of ceramics, bricks, light bulbs, cosmetics, medicines and food additives. The largest use is in the manufacturing of paper, especially in creating glossy paper. Kaolin is shipped both as a dry powder in covered hoppers and in tank cars with water as a slurry. In the slurry form the weight of water requires the tank cars be smaller capacity compared to other liquids such as ethanol and LPG. Identical tank cars are also used to haul calcium carbonate slurry, used in the making of lime and cement.
One of the more modern versions of the 16K Gallon Tank car is designed and manufactured by UTLX Manufacturing Inc (formerly Union Tank Car). The car is a 286K (referring to a 286,000 pound gross rail load limit) design with a capacity of approximately 16,000 gallons. The capacity varies slightly between UTLX and Englehard, the operators of the cars. The car is an AAR Plate C clearance car with a 111-inch I.D. tank and an overall length of 44 feet. For a complete bottom unloading the car incorporates a Funnel-Flow design. The cars are lined and kept in dedicated service to avoid cross-contamination.
N Scale Thrall High-Side Gondola w/ Load - Herzog/ White (3pkg) #1
Detailed Information
MODEL FEATURES:
Machined metal wheels
Screw-mounted 100-ton roller bearing trucks
Body-mounted McHenry scale operating knuckle couplers
Accurately painted and printed
Operates on Code 55 and 80 rail
Fully-assembled
Accurately painted and printed
Highly detailed, injection molded body
Weighted for trouble free operation
Minimum radius: 9 3/4inch
HO Code 83 Nickel Silver Rail - Wooden Ties - Flex Track (25pk)
Peco Code 83 track items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings.
Technical Specification:
Length: 3ft each
USE:
SL110 Conducting Rail Joiners: Nickel Silver for PECO Code 83 track
SL111 Insulated Rail Joiners for PECO Code 83 track
SL14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork
N Scale 50Ft NACC Box - Dresser Magcobar #42977
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
HO GE 44 Tonner Phase III - DC/DCC/Sound - Southern (Tuxedo Scheme) #1950
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
HO EMD GP40 - DCC Ready - MKT (Green & Yellow) #216
1982+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO Urban Steel Overpass - Kit
The Urban Steel Overpass Kit features:
Typical of steel overpasses built in industrial & commercial areas from 1920s on
Builds double-track railroad ballasted deck-bridge with 2-lane roadway below
Scale 14 Ft (4.2m) clearance between roadway & bridge deck
Highly detailed girders, beams & columns with scale rivets molded in medium gray
Separate wing walls can be installed to fit straight or angled installations
Measures:
Overall Size with Wing Walls: 12-3/8 x 9-1/16 x 3-1/16 inches - 31.4 x 23 x 7.7cm
Bridge & Abutments Only: 8-5/8 x 5 inches - 21.9 x 12.7cm
Track Height from Street: 2-5/8 inches - 6.6cm
Evergreen Scale Models - Opaque White Polystyrene Angle .156In x 14In (3 pcs pkg)
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO 53ft Railgon Gondola - CSX #484512
(black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 1969 Dodge Charger Daytona
(Black, Red)
HO 53Ft Gunderson Husky-Stack Well Car & Containers - Canadian Pacific #527022
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
HO 60ft PS Flatcar - Erie Lackawanna #8219
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - IWXX (Hunter Green) #220007
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO ICG, SCL, CNW - Asst Trailers 40Ft - Decals
Circa: 1970-80
Scale: HO Scale
Equipment Type: Trailer - 40Ft
Description: Asst Trailers - ICG, SCL, CNW- -Trailer - 40Ft - Illinois Central Gulf, Chicago & Northwestern, Family Lines- - Waterslide Decal - HO Scale
Evergreen Scale Models - Opaque White Polystyrene Channel .188In x 14In (3 pcs pkg)
HO Alco RS-3 Phase 1 - DCC & Sound - Erie Lackawanna w/ Large Louvers #915
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. DCC/Sound version features LokSound V5 decoder.
N Scale Concrete Tie Double Viaduct Track Super Elevated Curve - R414/381mm-45 degrees (2pcs)
(15inch - 16 3/8inch) WR414/381-45VS
Flexible Self Adhesive Paved Roadway Parking Lot
Model North American roads in minutes
Realistic surface color with correct striping for US roads in various eras
Ready to use, self adhesive and flexible - easy to add to new or existing scenery
Mix and match with other Roadway sections, each sold separately
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - IWXX (Hunter Green) #220032
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO RTR ACF 4650 3-Bay Hopper - ATSF (Gray Ga-150) #305102
Date: BLT 6-65
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO 30ft Single-Track Railroad Deck Girder Bridge - Kit
DIMENSIONS:
4-3/16 x 1-3/16inch x 1-3/16 inches (10.6 x 3.0 x 3.0cm)
- One of the most popular railroad bridge designs with unlimited overhead & side clearance for passing trains
- Fits steam-, diesel- and modern-eras
- Available in four common lengths to match prototype practice
- Build with open or ballasted deck
- Perfect as approach spans for bigger Cornerstone and other bridge kits
- Add to new or existing scenery with Single-Track Center Piers (933-4550) and Abutments (933-4551) available separately
- Use with WalthersTrack Code 83 Bridge Track (948-83004 sold separately) plus flexible, sectional and hand-laid track or your own rail
- Detailed plastic parts molded in dark gray
HO 40Ft PS-1 Boxcar - Santa Fe (Bx57 Chief) #31746
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
Acrylic - PRR Brunswick Green - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO SD75M - DCC & Sound - Santa Fe BNSF #231
Detailed Information
BNSF FEATURES:
Faded paint colors
Small EMD plow
Round deck mounted front ditch lights
Large Sinclair antenna
Early EMD trucks with hidden bearings
Road number specific details and artwork
Part of the original Santa Fe 1994 order, these SD75Ms are depicted as late in their life. Just before they were sold to PRLX, they soldered on looking beaten and battered, but still earning revenue for their owner. Renumbered to the 8200 class in the 2000s, they eventually returned back to their original Santa Fe numbers again, but with BNSF patches.
ROAD NUMBER SPECIFIC FEATURES:
#226
Ex-ATSF 226
small cab numbers
added rear number boards
yellow frame stripes
#231
Ex-ATSF 231
large cab numbers
yellow frame stripes
#249
Ex ATSF 249
large cab numbers
yellow frame stripes
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Dash 8-40CM - DCC Ready - BC Rail: Red/White/Blue #4617
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Southern Pacific #32971
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
1/4 inch Vertical Railing (2pcs)
Use for hand rails, stair rails, roof trusses, grating and other steel structures. Precision Injection Molded in Styrene Plastic. May also be used for trellises, fencing window bars, etc.
SCALE
ALL
MATERIAL
STYRENE
COLOR
VARIOUS
HEIGHT IN INCHES
1/4
HEIGHT IN MM
6.4mm
WIDTH IN INCHES
3/32
WIDTH IN MM
2.4mm
THICKNESS IN INCHES
.040
THICKNESSS IN MM
1.0mm
LENGTH IN INCHES
7
LENGTH IN MM
175mm
Colored Weathering Powder - Chalky White (1oz)
There are several basic methods and approaches to using these powders and we are sure you will probably develop a few of your own! These powders are intended to make rolling stock, buildings, and detail pieces look old, dirty, dusty, rusty, faded, and generally the worse for wear after being exposed to the elements of weather, travel, pollution, and mechanical wear and tear.
42Ft Coil Steel Car - Norfolk Southern Protect III #165909
Features:
Prototypical painting and lettering
See-through walks
Removable hood
Inside floor detail
Cut-levers
HO 1958 Cu Ft 2 Bay Covered Hopper - Closed sides
ATSF #181777
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
HO 50ft Evans Cushion Coil Car - Union Pacific/CNW #249151
Designed to speed loading and unloading while protecting large steel coils in transit, the Walthers Proto(R) 50ft Evans Cushion Coil Car is a great way to add steel traffic to any HO layout. These cars feature updated tooling with removable angled, round or glass fiber hoods.
Additional features include:
- One time run of these road numbers, limited quantity available - order now!
- Based on cars in service 1970s to early 2000s
- Prototypes carry larger steel coils used to make automobiles, appliances and food packaging
- Matching, removable hoods in angled, round and glass fiber styles with lifting and stacking brackets
- Fully assembled with etched metal walkways, grab irons, underframe cushioning device, separate brake gear, and more!
- Detailed body with V-shaped load cradle and separate restraints
- Heavy die-cast metal frame for enhanced performance
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Detail your new coil cars in minutes with the Cornerstone Steel Coil Load (#933-1499), sold separately)
- Great for use with Walthers Steel and Auto Industry Series!
HO Scale G2 AC4400CW - DCC Ready - CEFX #1002
Detailed Information
CEFX FEATURES:
Nathan K-3 Horn
Late body features
Late radiator lift rings
Evenly spaced rear grab irons
Engine air intake moved rearward
Notched fuel tank
Tank welded to underframe
Long handrail on left jogs over capacitor box
Double rail behind cab on left side
AAR style control stand
Electric air dryer
GE Hi-Adhesion trucks
Outside struts on opposite sides of trucks
Front ditch lights
The CIT Group placed two orders late in the production of the AC4400CW. They represent some of the newest features added to the AC4400CW line before its discontinuation. The first group was purposely built with Union Pacific features to whom they were originally leased. The second group was leased to the Canadian Pacific and share spotting features with late model CP AC4400CWs. Both wear CIT Groups distinctive -Blueberry- scheme with CEFX reporting marks.
ROAD NUMBER SPECIFIC FEATURES:
#1002
GPS Dome
High number boards
#1020
GPS Dome
High number boards
#1048
Sinclair Antenna package
Low number boards
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately ?painted and ?printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO EMD FT A+B Set - DC/Silent - AT&SF (Freight Scheme) #103 + 103A
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO EMD E8A w/HEP - DC/DCC/Sound - Conrail (OCS) #4021
The Rapido Trains HO scale Conrail OCS E-unit locomotive features:
HEP muffler for 4020-4021 and steam generator details for 4022
Dynamic brake options where appropriate
Sealed, twin-beam headlight configuration
Modified pilots
Correct side grilles
Rebuilt blanked sides (portholes removed) in two variations
Non-skirted fuel tanks
Three chime RS3L and Hancock air whistle air horns included
Hyatt roller bearing journal covers
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Accurate E8 sounds provided by ESU LokSound
Complete lighting effects headlights, class lights, backup lights, ground lights, cab lights, Stratolite or beacons and more. -Not all lighting features will work in DC mode.
Optional user-installed ditch lights.
HO NSC 3800 Covered Hopper - TH&B (Delivery Scheme)(6pk) #2
They are back, again! The famous Rapido 3800 cu.ft. Cylindrical Hoppers make a triumphant ~THIRD~ return with new road numbers and paint schemes!
FEATURES INCLUDE:
- Round-hatch or Trough-hatch design
- Correct Dofasco S-2 100-ton trucks
- Two body variations with 6- or 11-side panels
- Three brake equipment variations and optional additional air reservoir on NSC cars (if applicable)
- Etched running boards and brake crossover platform
- Factory-installed air pipes and coupler cut levers
- Finely molded plastic walkway supports and end cages
- Full separate air piping and brake equipment details
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX(6 pkg) #6
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
16095
16104
16118
16129
16135
16153
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO EMD GP35 - Paragon4 Sound/DC/DCC - C&O #3529
(Yellow Nose)
Ubiquitous on American railroads, the EMD GP35 is a 4-axle diesel-electric locomotive built by EMD and subsequently General Motors Diesel in the mid 1960s. Over 1300 of these locomotives were produced, and they were operated by virtually every major railroad in the United States. Additionally 26 units were built for Canadian railroads and another 57 units were built for Mexican railroads. These freight locomotives were powered by EMD 567D3A 16-cylinder engines that generated 2500 horsepower.
List of individually controllable lights in our EMD GP35 models:
- Headlight
- Rear Light
- Mars Light (SP only)
- Numberboard Lights (Front & Rear)
- Front Classification Lights
- Rear Classification Lights
- Emergency Light (SP only)
- Rotary Beacon (where appropriate)
- Ditch Lights (where appropriate)
- Cab Light
Road-specific detail options that are prototypically accurate for each road name:
- Truck sideframes
- Dynamic brake hatch
- Open & closed type fans
- Short hood detail arrangement
- Long hood end detail arrangement
- High short hood option where accurate
- Horn type and location
- Bell location
- Multiple front pilot types
- Multiple rear pilot types
- Accurate cut lever types
- MU receptacle arrangement
- Multiple sunshade options
- Antenna type and location
- Wind deflector type
- Rooftop AC for ATSF type
- Rotary beacon type and location
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up
- ABS Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, Wipers, and Etched Metal Grills
- Prototypical Light Operation - accurate for each paint scheme
- Prototypically Accurate Sounds for the EMD GP35 Diesel Locomotive
- Metal Kadee-compatible Couplers (2)
- Will Operate on Code 70, Code 83, and Code 100 Rail
- Minimum Operating Radius: 18 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
HO AutoFlood III RD Coal Hopper - UP/CMO (6pk) #1
Includes the following numbers, all individually packaged:
#504250
#504273
#504288
#504294
#504302
#504395
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO AutoScenes - Billy Browns Coupe
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
HO USRA Single-Sheathed Boxcar: PRR (Youngstown door)
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Tru Color Paint - Acrylic - Cayman Blue Poly - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
Turnout Drill Set
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
HO 60ft Flat Car - OTTX/Red Logo #92020
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OFOX #1720
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Value Line RTR - 13 Panel Coalporter - Conrail Quality #505535
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO Operating Full Width Diaphragms - 4 Car Set
Product Information
American Limited Models HO Scale Working Diaphragm kits make adding operating diaphragms to your passenger cars and locomotives fast and fun. Theyre accurate models of specific prototypes. Easy-to-build kits feature injection-molded plastic parts, in black or gray plastic. Sprung to hold together on curves down to 24inch radius, no minimum radius limitation. Will not interfere with operation of most couplers. All working diaphragm kits include complete instructions. Kits are designed to fit specified cars and cab unit locomotives.
Width: 1.50 (in)
Height: 2.00 (in)
Depth: 0.50 (in)
Code 83 Deck Truss Bridge
Athearn HO - 40ft Ribbed 3-bay Ballast Hopper - Norfolk Southern - #2 - 4pack
994679, 994695, 994732, 994744
Removable load
Separately applied wire grab irons and brake wheel
Solid nickel silver wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
NYC As Delivered (941H) - In Service 1964 #885823
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
N Scale NSC 5277 50Ft Plug-Door Boxcar - Canadian National CNIS #413039
MASTER MODEL FEATURES:
Bodies: 5111 or 5277 cubic foot styles
Ends: Nine or ten corrugations
Painted safety rails
Doors: 9ft or 10ft plug doors
Side Sills: Deep or shallow sills
Trucks: 70- or 100-ton
PSC Transfer Van - Canadian National #76558
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
HO Kenworth T680 Day-Cab Tractor with Cryogenic Tank Trailer
HO Syzdek Manufacturing - Cast Hydrocal Kit
DIMENSIONS:
8 x 6-1/2 inches
Named after famed modeler Sam Syzdek, this little factory is chock full of character & detail. You just don not get this gritty, realistic look in plastic kits! This two building set includes the funky old tin shed.
HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4508
8inch stripe w/ water expansion tank and ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
Tru Color Paint 055 - Acrylic - SOO Red 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 1958 Cu Ft 2 Bay Covered Hopper - Open sides
Polybor-Chlorate NAHX #30516
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
N Scale 1978 Ford Fairmount Sedan - Light Chamois
Features:
Side view mirrors
Head and tail light glazing
Interior detail
Simulated rubber tires
Under carriage detail
Kalmbach Publishing Co Book Mid Size track plans for realistic layouts
Mid-Size Track Plans for Realistic Layouts from Kalmbach features 14 track plans in several scales to fit spaces from 8 x 10Ft to 20 x 20ft. The layouts are based on interesting prototype railroads including the WM, C&O, CP, SP and many more. Those planning their own layout can use the plans as they are or use them as a basis for their own track plans.
The book features 100 color and 50 black-and-white images plus 14 illustrations. 112 pages, softcover.
HO High Cube DD Plug Box - BCOL #100427
MODEL FEATURES:
Separately applied brake wheel
Underbody with brake system details
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
3/16In Acrylic Round Rod (20pcs)
This clear solid rod can be used for bracing, cabling, piping, or wherever round stock is appropriate. Also quite useful in crafts and educational projects. Precision Extruded in Clear Acrylic Plastic.
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
CLEAR
HEIGHT IN INCHES
1/8In
HEIGHT IN MM
3.2mm
LENGTH IN INCHES
8-3/4In
LENGTH IN MM
225mm
Evergreen Scale Models - Opaque White Polystyrene H-Column .156In x 14In (3 pcs pkg)
HO EMD GP40 - DCC & Sound - Canadian National (Large Noodle) #4017
1967+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Air Conditioner Dash 9 (Dayton-Phoenix)
Die-cast metal
Part Four 14 x 6inch 35 x 15cm
Add character to urban areas along your railroad with this series of structure kits. The models feature detailed walls made of cast Hydrocal, plastic windows and doors, along with full-color signs and awnings. Each can be assembled with basic hobby tools, and easy to understand step-by-step instructions walk you through construction, from gluing the kit together to final painting and weathering.
This kit has been upgraded from earlier versions with: Mt. Albert Scale Lumber for the fence, Paper Creek aged corrugated roofing for the shed, Tichy windows, a Rix Products storefront, a laser-cut -Auction- stencil, full-color signs (including the large pin-up art for the -Bottoms Up Bar-), a laser-cut roof, new detail castings (boxes, crates, junk, etc.), microshredded newspaper for -street debris,- a full-color billboard, tarpaper roofing, awnings and more
For more detail on how to start and finish model go to downtowndeco .com TUTORIALS WITH RANDY HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
Ortner 5-Bay Rapid Discharge Hopper - OMAX (5-pack)
MODEL FEATURES:
-Removable load
-Decorated models fully-assembled and ready to run out of the box
-Highly-detailed, injection-molded body
-Separately applied wire grab irons on side ladders
-Separately applied brake wheel
-Body mounted McHenry operating scale knuckle couplers
-Minimum radius: 18inch
-All 5 packs come with unique road numbers
-Machined metal wheels with RP25 contours operate on all popular brands of track
-IPSX, OMAX, and SMEX are coal service cars. CBNS, HLMX, and ITGX are sugar beet service cars
-Sugar beet service cars will include newly-developed etched upper extensions included in poly bag
PROTOTYPE AND BACKGROUND INFORMATION:
The unit train concept was pioneered by Ortner Freight Car Co. in 1960 as an effort to streamline bulk cargo unloading. Robert Ortner, developer of the rapid-discharge door system, targeted unloading a train of rapid discharge cars in 30 minutes to an hour. Previously this same task would take four hours or longer. Unit trains shuttle back and forth between mines and power plants eliminating dwell time in yards. The concept has become ubiquitous to the modern railroading scene. In more recent years many of these cars have been converted to sugar beet hauling service and had capacity extensions installed.
ESU 50210 ECoS 2.1 DCC Command Station,
Full Color Display, MM/DCC/SX/M4, Set including power supply input 90-240V, output 6A / 15V-21V, 150W power supply, German /English manual
The ECoS 50210 is already the second generation of our successful ECoS command station. With the latest ECoS command station, ESU continues to offer state-of-the-art digital technology combined with contemporary functional range and easy handling all this for a fair price-performance ratio.
The ECoS has - like most of the recent central stations - a large coloured display with high resolution. In combination with its ground-breaking and easily operated user interface and excellent contrast values of the coloured screen, ECoS reaches unprecedented ergonomics: unlike all the other central stations, the ECoS can be also operated without a stylus - all symbols and writings are hugely marked and clearly structured.
ECoS has 9 function keys per integrated cab. The light-, and function keys 1 to 8 show the current state of the function via LEDs.
Discover the fascinating possibilities of the ECoS command station on the following pages. But take heed: ECoS performance is so good, that even we had to re-read a few passages to believe it!
HO NSC 3650 cf 66Ft Railgon - GNTX #295643
Aurora Miniatures North America Inc. is proud to offer the National Steel Car 3650 cf 66ft Railgon Gondola in HO scale. These Canadian-built modern 66? gondolas were introduced in 2012, they were assigned the GNTX reporting mark and painted in the prominent Railgon scheme with a large Tuscan red TTX logo on a yellow background. They can be found across North America in steel mill service. Similar-looking gondolas were also built for BNSF, Canadian Pacific and other owners. We are offering 20 unique GNTX numbers along with a ?Data Only? version for the first production run.
Walthers Cornerstone 3488 HO Vintage Motor Hotel Kit
Model an icon of 1950s and 60s highways with the Cornerstone Vintage Motor Hotel kit! This detailed HO structure features two floors of rooms and matches parts in the Vintage Motor Hotel with Office and Restaurant (933-3487, sold separately) to build a bigger complex. Many have also been converted into apartments, making it a perfect addition to modern city scenes as well. Other features include:
Compact footprint fits small HO lots
Separate one-piece door and window units for easy customizing
Air conditioner/heater grille details for each room
Detailed exterior stairs and railings
Makes a great apartment building for a contemporary layout
Matches parts in the Vintage Motor Hotel with Restaurant Kit (933-3487, sold separately) for easy expansion and customizing
Molded in five colors and clear plastic
10-3/16 x 4x2-5/8, 25.8x10.1x6.6
N Scale Flexi Flo Hopper (Early) - Penn Central (Ex NYC Patchout) - 6-pack
Road Numbers Include:
#897802
#897808
#897812
#897813
#897815
#897823
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO FMC 60ft Hi-Cube Ex-Post Boxcar - MILW #4222
MODEL FEATURES:
- Single 10ft Youngstown door
- Separately applied grab irons, end ladders, and brake wheel
- Photo-etch coupler cross-over platform
- Highly-detailed, injection-molded body
- 36 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Minimum radius: 18 inches
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Violet
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
Building the Right-Sized Layout - Softcover Book
Softcover Book by Thomas Klimoski
112 Pages
Have an extra spare room in your house? Downsizing your layout? Building The Right-Sized Layout is the perfect book to help with planning a room-sized layout for your home. This new book features 5 track plans covering details on how to create a manageable layout with space, time, and resources in mind.
Youll find:
Track planning strategies
Construction techniques
Room-planning concepts
Tips on operating once your layout is built
And more!
Featuring author Thomas Klimoskis Georgia Northeastern Railroad, as well as 3 other examples of small layouts, this planning book is a must-have for model railroaders.
AK Interactive - FAQ 2 AFV Painting Techniques Book - 5th Edition
HO Scale SD30C-ECO - DC/DCC Ready - Canadian Pacific #5038
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
HO P42DC - DCC Ready - VIA #917
Detailed Information
VIA FEATURES:
VIA-added extra nose light
VIA style antenna array
Dual 5-chime forward facing horns
Forward and reverse red marker lights
VIA approved artwork
Starting in 2017, VIA began to add wrapped schemes for their P42DC fleet. By 2019, -Love the Way- in both English and French was applied to a few select units with each side having a different version. In Nov. 2019, VIA applied the -Poppy- scheme, a tribute to veterans, to a small handful of units.
P40DC/P42DC SERIES LOCOMOTIVE FEATURES:
Officially licensed product of Amtrak (Amtrak-painted units)
Officially licensed product of Via Rail Canada (Via painted units)
Officially licensed product of Operation Lifesaver (Operation Lifesaver-painted unit)
4 different nose variations: Amtrak as-built with strobes, Amtrak as-built without strobes, Amtrak rebuilt, and Via
Operating marker lights front and rear on Tsunami2 equipped models
Rear marker lights installed, but not connected on DCC Ready models
Newly-tooled lit number boards
Flashing strobe light and -Big-Hole- emergency light on equipped Amtrak units (Operational on DCC only)
Flashing ditch lights on non-strobe equipped Amtrak units synced with horn blow (Operational on DCC only)
Flexible rubber MU hoses
Flexible rubber trainline hose
Separately applied wire handrails
Exhaust stack
Photo etched metal radiator fan grille
Highly-detailed underframe including air tanks with air lines, air filter, and air dryer with two different types of rock shields
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting including operating ditch lights and red marker lights
Completely-redesigned die-cast frame for superior tractive effort
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
HO Flexi-Van 40ft Trailer - Chicago, Louisville & Nashville (2pk)
(logo and Flexi-Van placards, end doors)
Capture the color and variety of early intermodal operations with SceneMaster flexi-van trailer 2-Packs! Introduced in 1958 with removable wheels for use on specially-equipped flexi-van flatcars, they were later converted to standard 40ft trailers for road and rail service and served into the 1980s.
FEATURES:
- End or side doors as appropriate
- Detailed wheels and bogie with landing gear
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14093
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Weyerhaeuser #1104
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
1956 Chevy 210 Two Door Sedan - Unpainted and Resin Cast Kit
HO Union X-3 Tankcar - UTLX (1930s Paint) #32007
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO ET44 Tier 4 - DCC & Sound - CN/100th Anniversary #3221
Road number 3108 Has a black cab roof; does not have the circle graphic on the nose
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
GE C30-7, BNSF #5175, Green and Orange w/Paragon3 Sound/DC/DCC
FEATURES
NEW Paragon3 Sound & Operation System FEATURING ROLLING THUNDERTM with Authentic Sounds and Prototypical Operation in both DC and DCC environments
Locomotive Composition: ABS Body with Die Cast Chassis
Couplers: (2) Operating Kadee or Compatible
Compatible Tracks: Code 70, 83, 100 Rail
Minimum Operating Radius: 18 in or greater
HO MLW FPA-2u & FPB-2u - DC/Silent - CNR - (1954 Scheme) #6759 & 6859
The entire FPA-2u and FPB-2u production is a CONDITIONAL RELEASE. If Rapido receives enough pre-orders by the order deadline, then production will proceed! If not, then they will never tool these models, and your deposit will be credited back to you.
The Rapido FPA-2u and FPB-2u models feature:
- The only HO scale MLW FPA-2u and FPB-2u units ever. Full stop. End quote.
- Operating headlights, class lights and back-up lights
- Canadian-cast Dofasco Type B trucks
- Full underbody piping and conduit
- Separate grab irons and handrails
- Correct MLW-specific large-capacity fuel tanks
- Heavy, die-cast chassis
- Rapidos improved 5-pole motor with dual flywheels
- Full, multi-color interior
- DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
- Accurate sounds recorded from the REAL FPA-2u #6758
- Improved light grey color on the CN 1961 scheme
HO RTR PS-2 2600 Covered Hopper - Chicago North Western #95846
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
HO PC&F 5241 CUFT - Boxcar - St. Lawrence & Atlantic (SLR) - Single Car #186
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 36Ft RTR 3-Dome Tank Car - ACFX #62
Product Information
Add authentic cars to your steam- or diesel-era layout with these 36Ft 3-Dome Tank Cars from WalthersMainline! Serving a wide range of both producing and consuming industries, these cars were actually three tanks in one, ideal for handling smaller amounts, and a greater variety of product at once. Features of these cars include:
One time run of these roadnumbers, limited quantity available - order now!
Prototypes hauled petroleum, chemicals and similar liquid loads in three compartments
In service from late 1920s to 1960s
Detailed underbody with AB brakes
Fully assembled
Correct 33inch turned-metal RP-25 wheelsets
Proto MAX metal knuckle couplers
48Ft All Purpose Well Car - TTX (Next Load Any Road) #456227
Features:
Floor with correct ovals and cut-outs.
Two hitches
Etched walkways
Four IBC bins.
Detailed brake components
Prototypically accurate paint schemes
Recommended 24inch radius
HO MLW M420 - DC/DCC Ready - Canadian National (North American Scheme) #3561
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
Esso Service Station (1946-1965)-Gas Stations - Waterslide Decal
Tall Steel Viaduct Length Extension - 60Ft - Note picture in the middle is this kit
Tall steel viaducts are some of the most spectacular and interesting types of bridges. They are used by railroads to span wide and/or steep valleys, often replacing wooden trestles. These HO and HOn3 Tall Steel Viaducts are available in three base kits, three length extension kits, a height extension kit which adds a 4th and 5th story, and a tower kit. The various kits allow you to design and build your own custom bridge of any length from one to five stories high, with full towers or bents, and straight or curved. A 10-page instruction sheet with over 35 photos and illustrations is included. These bridges are beautifully detailed and are often the centerpiece structure on modelers layouts.
A STYLE JACKING PADS
WOOD DECK
MINERAL BROWN WITH WHITE LETTERING
NO LOGO
BLACK TRUCKS
Beginning in the 1940s, (some maybe earlier) General Steel Castings Corporation began production of heavy-duty depressed center flatcar castings, having a carrying capacity of 125 tons. These were used to build cars for transporting oversized, high-tonnage loads such as transformers, large castings, and various pieces of machinery or machinery components. The center decks were lowered to just above rail height to provide railroads with the ability to accommodate taller loads while providing high loading ratings. These cars were single-piece castings that were sold as kits, along with GSC Commonwealth standard 3-axle trucks, to customer railroads to assemble and outfit as they required. Some railroads opted to supply F36 Buckeye trucks for use on their cars. Due to the nature of the extreme loading of these cars, dual braking systems were required with the main control valve on the B end of the car and an auxiliary control valve on the A end of the car. All of the braking hardware was installed inside the frame of the car, with exterior piping along the sides of the car for the main airline, and for the piping tying both brake systems together. Both ends of the car were fitted with an air reservoir and a hand brake, and the system provided brake shoes on all twelve wheels of the car. Based on customer orders, the cars came with a varied number and location of jacking pad styles. Some cars had square pads located over the trucks, while others had A style pads located at the upper decks end where the interior deck curvature began. Some had no jacking pads at all, yet others had square jacking pads in the same location as the A style pads. Most all railroads initially provided wooden planking, usually oak, to cover the two upper decks of the cars, but over time, as planking aged and deteriorated, some roads chose to remove it altogether and to cover the access holes in the top deck of the casting with metal grating or plates welded over the holes. The railroads, over time, also added different tie-down gear, and load abutments to the car decks, creating many one-of-a-kind variations to this versatile heavy hauler. While the original trucks were equipped with solid friction bearings, by the 1960s, most railroads began changing them out for roller bearings. Some railroads owned only one car, while others had larger fleets of cars, depending on which customers they served and the frequency with which loads were generated by those customers. Considering the many railroad mergers over the years, a large number of these cars were renumbered numerous times and wore a variety of paint liveries. Given the longevity of these cars from the 1940s through the turn of the century, and the number of specific changes each railroad made to load restraint accouterments as loads changed and requirements varied, there is an endless variety of railroad-specific variants that existed. Class One Model Works has chosen to produce the 58ft-4in version of this car with a 21ft long lower deck, the most common size, while also producing a car that will provide the appropriate body style, jacking pads, and decking variations used by each railroad, to serve as a highly-detailed car that can stand alone, or be upgraded by the modeler for the small specific details they would like to incorporate, given the timeframe of their chosen era. The first run of cars will be equipped with GSC trucks that have been upgraded to roller bearings. Future runs will provide cars with friction bearings, Buckeye trucks, and other added details as they work through the list of GSC car owners.
Plastruct 90029 ABS I Beam 1/3 (4pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/2
HEIGHT IN MM
12.7mm
WIDTH IN INCHES
1/4
WIDTH IN MM
6.4mm
THICKNESS IN INCHES
.080
THICKNESSS IN MM
2.0mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
TRADITIONAL ABS I BEAMS Use for horizontal or diagonal members in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or professional
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286346
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
60ft Pullman-Standard Flatcar - Ready to Run -- Alaska Railroad
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Code 55 Nickel-Silver Rail Joiners
Burlington Northern #979006
This Bachmann Silver Series(R) Scale Test Weight Car is a model of typical the diminutive cars used to calibrate track scales used for measuring car and load weights. They were used to check axle load limits and to determine the billing of customers for cargo loads. Scale Test Car features a die-cast metal body with realistic decoration, metal wheels and body-mounted E-Z Mate(R) magnetic knuckle couplers.
N Scale S-4 - DCC/Sound - CP Rail #7113
FEATURES:
- Scaled from actual prototype measurements
- 2 cab variations - riveted or welded
- Option for horizontal or vertical radiator shutters
- Fine scale handrails
- Separately-applied coupler cut levers, air hoses, piping, etc.
- Directional LED lighting (includes cab rear headlight)
- Die-cast hood & chassis for improved pulling performance
- Dual-flywheels for maximum performance at all speeds
- Factory-equipped with AccuMate knuckle couplers
- Exceptional painting and printing
- Features ESU LokSound Decoder
HO GP40 - Gold DCC & Sound - Susquehanna #3040
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
HO 40Ft Sheathed Boxcar - Canadian Pacific Railway #234424
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Machined metal wheels with RP25 contours
Body-mounted McHenry operating scale knuckle couplers
Painted and printed for realistic decoration
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 15inch
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Gulf Oil (Repaint) #5180
Built: 11-35
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
N Scale AutoFlood III RD Coal Hopper - UP/CMO #504341
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO MLW M420 A/B Set - DCC & Sound - British Columbia (Two-Tone Stripe) #641, 681
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO RTR SD39 - DCC & Sound - Copper Basin Railway #303
CBRY FEATURES:
In the late 1980s, Copper Basin RY picked up some surplus Ex-SP SD39s for their copper concentrate trains in AZ. When purchased, they were kept pretty close to the old SP-specs other than the removal of some of the oscillating lights and the bell being moved to the long hood. They were repainted into this unique copper and grey paint scheme. Our models depict these details such as: front and rear large plows, rear brake wheel, P-3 Horns, FARR grilles, removed red warning lights, and road number-specific trucks and headlight placement.
ROAD NUMBER SPECIFIC FEATURES:
#302
Ex-SP 5321
high-mounted brake cylinder trucks
relocated headlight
unique front and rear stripe pattern, P-3 horn with mis-matched bells
removed red warning lights
modified L-window cab
whip antennas
#303
Ex-SP 5323
low-mounted brake cylinder trucks
unique front and rear stripe pattern, P-3 horn
removed red warning lights
modified L-window cab
whip antennas
white painted roof #304
#304
Ex-SP 5324
low-mounted brake cylinder trucks
unique front and rear stripe pattern, P-3 horn
removed red warning lights
modified L-window cab
whip antennas
white painted roof
SD39 SERIES LOCOMOTIVE FEATURES:
Separately applied air tanks
Coupler cut levers
Rubber MU hoses
Photo-etch stainless steel windshield wipers
Fine scale handrails
Non-sound version features 21-pin NEM DCC plug
See-through dynamic brake and radiator fans
Curved radiator fan grab iron
Exhaust stack
Frame-mounted bell (unless noted)
Detailed 4000 gallon fuel tank (unless different capacity is noted)
Flexicoil-C trucks with high or low brake cylinders (per prototype)
McHenry scale knuckle spring couplers
See-through cab windows
Bi-directional LED lighting
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Painted and printed for realistic decoration
Highly-detailed, injection molded body
Minimum radius: 18inch
Recommended radius: 22inch
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard Econami sound decoder by Soundtraxx
Engine startup sound sequence
Dynamic brake sound or Non-Dynamic Straight to idle on F4
Extra prime mover and horn sounds exclusive to Athearn
Sounds recorded from a real EMD 12-645E3
Multiple bell sound files user configurable via Configuration Value (CV)
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Current Keeper ready with on board expansion plug
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via CV changes
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23010
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Coupler Lift Bars - For EMD GP & SD Units (1 Pair)
HO ACF 2970 Covered Hopper - ACFX #44520
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons, stirrup steps and brake wheel
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Screw-mounted express-type trucks
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
GP7 Diesel, A+B Sets, w/ DCC & Sound - ATSF Zebra Stripe #2791/2791A
Era: 1950s+
ATSF FEATURES:
Forward and Rear facing single chime horns on A units only
Dynamic brakes
-Canvas- sunshades (A units)
Fuel tank skirts with rounded cutouts
Intricate -Zebra Stripe- paint scheme
LOCOMOTIVE FEATURES:
Trainline and MU hoses
Coupler cut levers
Drop steps unless noted
MU stands
-Nub- style walkway tread
Bell placement & type per prototype
Fine-scale handrails for scale appearance
Wire grab irons
Lift rings
Windshield wipers
See through cab windows and full cab interior
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Sander lines
Speed recorder unless noted
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Body mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Replacement parts available
Minimum radius: 18In
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included
PROTOTYPE INFO:
In 1949, EMD introduced the GP7. The basic design followed most diesel switchers with the addition of a short hood instead of an end-cab. The hoods were also full height to better accommodate the diesel engine and mechanical and electrical components.
In 1954 EMD upgraded the GP7 to become the 1,750 horsepower GP9. Externally, the first GP9s were virtually unchanged from the last GP7s. Later versions would include different louver arrangements and the last ones would come without the frame skirting. The GP9 was available with all of the fuel tank, steam generator, and dynamic brake options as the GP7, including -torpedo tube- air tanks mounted on the roof.
Many railroads chose to rebuild their GP7s and GP9s for continued service. Often times, it was cheaper to do this rather than purchasing brand-new locomotives.
HO Norfolk Southern G41A Repaint 1976 w/o Hoods PRR Shops G41A Coil Car
NS GP67 Repaint 2005+ is an exciting release for us. NS rebuilt some of their G41A cars around 2000 and placed them in the GP67 class. These rebuilds were changed from 6 troughs to 5 troughs to accommodate larger diameter coils. This major change, along with yellow trough bracing, makes these cars really stand out in the crowd. The Tangent offering picks up in 2005+, where the NS cars have received their conspicuity stripes. The troughs received not-so-subtle wide white stripes down the centerline of the car to assist loading. If you read the data carefully, you will find accurate 50 Year Life Extension stenciling and painted diamonds labeling the cars for HOT steel coil service. The 125-Ton trucks feature NS reporting mark and car numbers along with 38in wheels and rotating Timken caps. These are some HOT cars for the modern era.
SPECIFICATIONS:
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
Add color and variety along busy streets with these billboards, designed to mount directly on buildings! Features of this SceneMaster kit include:
Newly tooled kit!
Realistic detail for businesses, industry and other structures on busy streets
Fits 1920s to present
Parts to build three complete billboards
Build with vintage- or modern-style platforms and nonworking lights - both styles included
Colorful printed signs
Easy to assemble and install on Cornerstone(R) and other structures new or old
N Scale AutoScenes - Ma & Pas Trailer Haven
Ma and Pa relax in retirement. Complete with fishing tackle, bearskin rug, an old hound dog, a toasty fire and a cold bottle of sarsaparilla!
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:160 N scale models.
Figures included as shown.
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- Canadian National #621308
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Solid Color Trim Film Waterslide Decal Sheet - Black
Solid sheets of a single color for all kinds of special effects, backgrounds or custom art.
Each sheet measures approximately 4-1/2 x 7 inches.
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200048
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Southern Pacific #33047
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Pressureaide Covered Hopper - ACFX (Orange Sill Venturi) #59914
(white, blue, orange, Venturi)
HO CP Plow Pilot (6/pkg)
Detailed Information
PRODUCT FEATURES:
Brass casting, individual parts feature mounting lugs for secure placement on model.
HO 53ft Singamas Corrugated-Side Container - Canadian National
(white, gray, red, Worldwide Logo)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes
HO 53ft Railgon Gondola - Soo Line #64057
(oxide, white, large name)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Golden West - INTX #74114 (blue car, red & yellow lettering, patch)
These all-new HO models include etched-metal, see-through roofwalks, detailed brake gear, authentic 100-ton roller bearing trucks with blackened metal wheels and body-mounted Accumate(R) couplers with screw-attached coupler pockets. Undecorated models come with optional parts for three different types of loading hatches and two styles of discharge outlets. Decorated models come prepainted and lettered in a variety of railroad-owned schemes with details appropriate for the late (post-1971) production.
HO NSC 60ft Ingot Flat Car - RTAX Liberty Railway Services
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
HO Greenville 86Ft Quad Plug Door Box Car - BS-84 Claytor Repaint 1987+ - Southern (NS) #42415
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Southern (SOU) NS-era -BS-84 Claytor Repaint 1987+- is a very common 1980s paint job in the world of auto parts cars, this one for the Norfolk Southern (NS) system. After the NS merger, NS continued to paint cars in pre-NS schemes, this -Claytor scheme- repaint included. The Southern cars were built in February of 1970 as part of a lot that included the distinctive Center-Of-Car cushioning details. We have duplicated those same features underneath and on the ends, with the extended draft gear. The Claytor repaint features the original Apex crossover platforms with a Universal brake stand and brakewheel. Check out those gorgeous new 70-Ton Barber S-2 Birdsboro Foundry trucks with rotating -Timken- roller bearing caps, just like the prototype. These beauties are available with four road numbers!
HO Surfliner Coach w/Lights - AMTK/Redondo Beach #6404
AMTRAK SURFLINER PASSENGER CAR FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurate painting and printing featuring licensed Amtrak paint colors and artwork
- Each car individually named and numbered
- Tinted window glass
- Full end details including train line hoses & HEP receptacles
- Cab cars feature 3 different antenna arrangements per era
- Unique interior details for each car type
- Detailed paint colors including separate colors for floors, walls, seats, tables, control compartment, etc.
- Business class cars feature complete upper & lower service areas
- Cafe cars feature complete kitchen & serving area
- Interior stair & luggage rack details
- McHenry® scale knuckle couplers - Kadee® compatible
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- Packaging securely holds model for safe storage
LED LIGHT EQUIPPED FEATURES:
- LED lighting for long life and reliable operation
- On-board DCC Decoder by NCE – Operates in DCC and Analog (DC) with lighting functions controllable in DCC
- LED Interior Lights
SOUND EQUIPPED MODELS ALSO FEATURE:
- Soundtraxx Tsunami SoundCar decoder w/ exclusive sounds recorded from actual Surfliner cars
- A/C compressor operation
- Doors opening & closing with associated beep
- Generic station announcements with associated beep for PA system use
- Vacuum toilet operation sound
- Clickety Clack rail sound
- Brake system sounds including brake set & application, and emergency brake air dump sound
- Cab cars feature authentic K5LA horn and bell
- Interior LED lights on upper & lower levels
- Working marker lights on car ends
- Cab cars feature working head & ditch lights
HO EMD SD10 - DCC & Sound - SOO Line #532
SOO Line --Conditional Announcement--
- Ex-MILW units / same features
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO 53ft Railgon Gondola - Soo Line #64122
(oxide, white, large name)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 36ft Old-Time Wood Boxcar - Chesapeake & Ohio #6355
Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- IC
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Illinois Central (IC) -Delivery 2-1970- is a hot car, no matter how you look at it. That orange paint
coupled with the sharp black and white split-rail logo is one of the most iconic schemes for that era. The IC cars feature their as-built 1970 appearance that includes Gypsum crossover platforms, Ajax brake hand brake housing, Greenville-applied tack board locations and that beautiful End-of-Car Cushioning underframe setup. The paint, lettering and graphics are truly Tangent Accurate from the large, centered Illinois Central lettering down to the distinctive IC-style dotted return route box with instructions to send the car back to the GTW in Flint, Michigan. 70-Ton Trucks with 33in wheels and rotating Timken roller bearing caps finish off this Mainline of Mid-America offering. Our IC masterpieces are available in four different numbers.
HO Maxwell Ave. Home - Kit
The Rix Maxwell Ave. House kit is modeled after mid western homes built during the 1930s and 1940s.
They feature clapboard walls, asphalt roof and brick porch.
The Rix Maxwell Ave. House kit come in three versions.
Kit number 201 is a small house with no porch.
Kit 202 is a house with front porch.
Kit 203 is a house with side porch.
Kit 204 is the porch only.
Rix Maxwell Ave. House is molded in three colors.
Roof, Brown.
Walls, White.
Brick Porch, Red.
Dimensions:
28 wide x 31 deep scale feet
3-7/8 x 4-1/4 inches
HO SD70 - DCC & Sound - Norfolk Southern #2563
NS FEATURES:
Acquired by NS after 1998-1999 split of Conrail
Antennas and conduits on cab and long hood
Nathan K5LAR24 horn
Cab vent
Air Conditioner
Small front plow
-Dual- fuel sight glasses
Late fuel tank
Spare knuckle brackets on rear pilot
This group of former Conrail SD70s joined the NS fleet in 1998 because of the split up of Conrail between NS and CSX. Early repaints featured diagonal dashes along the frame.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200095
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
HO GP18 - DCC Ready - Grand Trunk Western #4707
Detailed Information
GTW FEATURES:
Winterization Hatch
Beacon
Bell mounted on long hood end
Sinclair antenna
Separate, optional ACI labels
Canadian style handrails
Separate, optional spark arrestors included with model
These units were part of an 8-unit order that arrived on the GTW in February 1960. They were part of the general freight pool of locomotives and were often seen working with their GP9 predecessors.
GP18 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Accurately-painted and printed paint schemes
Body-mounted McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
HO Class D10k 4-6-0 - DC/Silent - Quebec Central #1083
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
HO NSC Ballast Hopper - BC Rail (Early) #2846
1977+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
N Scale Value Line RTR - AeroFlo Coal Gondola - Procor (pkg 6) #1
-A02 Road Numbers: 103009, 103037, 103064, 103076, 103095, 103110
HO - Air Hose - Standard Type, Brass
Use on locomotives, tenders and cars.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14059
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Modern Triple-Track Signal Bridge w/6 LED 3-Aspect Heads - Assembled
(8-9/16 Inches Leg Spacing)
- Triple-Track Prototype
- Durable Plastic & Brass
- Etched-Metal Handrails
- Electrical Box Detail
- Operating Signal Heads
- Completely Assembled
- Extremely Accurate Design
- 18 LED Lights!
THE PROTOTYPE:
From the introduction in the early 1990s, these modern signal bridges have sprung up by the thousands across North America. Built from specialized aluminum and stainless steel components, these giant structures are common on all current major railroads and a growing number of commuter rail lines.
Operating Requirements:
This signal bridge requires a signal control circuit to function correctly. Each of the six signal heads are wired in the common anode configuration; the RED wire is common. Consult the manual of your signal circuit (sold separately) for installation instructions in the common anode configuration.
NOTE:
The micro-LEDs in this product require NO MORE than 2.0-2.2 Volts; 25-30 Mili-Amps.
This product is NOT compatible with the common cathode system used by the Atlas Signal System.
Evergreen Scale Models - Opaque White Polystyrene Rectangular Tubing .125In x .250In x 14In (3 pcs pkg)
HO RTR ACF 4650 3-Bay Hopper - ATSF (Gray Ga-150) #305109
Date: BLT 6-65
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Trailer Train #91913
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
1:87 Prevost X3-45 Coach: Diversified Fort McMurray Strong
FEATURES:
-Diecast metal.
-Pad-printed graphics.
-Very limited edition!
Evergreen Scale Models - Opaque White Polystyrene Channel .250In x 14In (3 pcs pkg)
HO FM H16-44, With Sound & DCC, Canadian Pacific: Action Red Scheme No.8715
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Chicago & North Western #39615
Built: BLT 2-69 RBLT 7-84
Metal wheel sets , Kadee #5 installed
Acrylic Flat Colors - Cockpit Green - 3/4oz (23mL) Bottle
XF-71
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO 53ft Jindo Container - Milestone MLNU ex-Pacer Set #1 (3pk)
(#889829, 889836, 889856) (BLUE/RED)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting
HO Portec 3000 Covered Hopper - WINCHESTER & WESTERN #1026
Features:
- Ready to run
- Injection molded plastic
- Fine scale detail with many separately applied parts
- 2 Body and roofwalk variations to accurately match the prototype
- 2 styles of vibrator brackets
- Highly detailed end cages and brake gear
- 100 Ton Trucks
- Metal Couplers
- Etched metal roofwalks and end platforms
- Crisp painting and printing
N Scale AutoScenes - Pickem Up Truck
It aint pretty, but this old, rusty truck gets the owner around town just fine!
HO GP38 Gold - DCC Sound - FURX #5527
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate? knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
AccuMate? couplers are made under license from AccuRail, Inc.
Sound Features for Gold Series :
(DCC Operation)
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F31 .
Follows all NMRA DCC standards and recommended practices
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes ?on the fly? are provided for true realism
HO 85ft ACF 44-Seat Coach - Union Pacific (Sunshine Special) #5480
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
Delivered new in 1954 from American Car & Foundry with seating for 44, the car is currently named for a Missouri Pacific train running between St. Louis and various Texas cities from 1915 to 1948 when the new Texas Eagle took over its route.
HO EMD FT A+B Set - DC/DCC/Sound - Lackawanna (Grey & Maroon) #653A + 653B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO G2.0 SD60M-3 Tri-Clops - DCC & Sound - BNSF #1416
BNSF FEATURES:
Ex-BN, new -wedge- logo paint
Electronic bell
Angled electrical cabinet
Road number specific features
Starting in the mid 2010s, BNSF overhauled a batch of SD60Ms. They were re-wired, rebuilt, repainted, and had remote control equipment installed in most of them. BNSF classifies these as -SD60M-3s-. In this run, we are offering two road units, and one yard service version. 1405 retains it older BN carbody with brake wheel, while 1416 and 8131 has the newer rebuilt body with electronic brake ratchet. All 3 show slightly different versions of the current BNSF scheme.
ROAD NUMBER SPECIFIC FEATURES:
#1405
Small EMD plow
-Skate- style antennas on the cab roof angles
front and rear ditch lights
brake wheel.
#1416
Small EMD plow
strobe light (effect in DCC)
front and rear ditch lights
unique front number board font
remote control decals, new BNSF style electronic brake ratchet.
#8131
No plow
strobe light (effect in DCC)
front ditch lights
-Yard service only- lettering
remote control decals, new BNSF style electronic brake ratchet.
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately ?painted and ?printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Warranty service available
Minimum radius: 18inch Recommended radius 22inch
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
Animated roller bearing caps
SOUND-EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - SOO Line #136012
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Alco FA-1 - DCC Ready - Canadian Pacific (Script Scheme) #4016
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
Frame, 8 Files, 5 Flex-Pad Sanding Sticks - Set
The complete solution for discovering all the possibilities of the Flex-I-File system. Package includes 1 Flex-I-File frame and 8 assorted tapes plus the complete grit range of Flex-Pads. All abrasives contained in this package can be used wet or dry. This kit is a perfect combination of products for the beginner or advanced model miniaturist!
Contents: 5 flex-pads (one of each grit we offer), 1 triple grit polisher, 1 anodized aluminum frame, and 8 assorted abrasive tapes
HO GMD SD40-2 - DCC & Sound - BC Rail (RWB Hockey Stick) #765
Product Information
This Bowser Executive Line GMD SD40-2 is based on the huge fleet of diesels constructed by the General Motors Diesel Division plant in London, Ontario for several Canadian railroads, and a few US lines as well. This finely detailed model features GMDD and railroad-specific details, accurate decoration, operating headlight, can motor, brass flywheels, nickel-silver wheels with RP25 flanges and knuckle couplers.
Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound Select decoder. Analog (DC) version has 21 pin socket for DCC module.
Bowser does not recommend LOK sound locos for use on DC layouts.
Features LokSound Select decoder, GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, Flywheels, Can motor, RP25 flange, KD couplers
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
Cushion Underframe Coupler Lift Bars - Type 1 - 4 Pairs
This parts package includes four pairs of unpainted Tangent Scale Models etched metal coupler lift bars for cars with cushion draft gear.
While the shape of lift bars can change from car to car, these coupler lift bars are used on our PRR Shops X58 box car and are potentially suitable for any model. These are great parts to have on hand!
N Scale Railcar Height Door - pkg(2)
PA-1 Single Locomotive - DCC & Sound - New York Central #4200
Includes:
No Dynamic Brakes
Our first run of Alco PA models feature:
Correct nose and roof profiles 3D-scanned from the prototype
Loads of roadname-specific details
A units and A-B sets available
Dynamic or non-dynamic brake versions, where appropriate
Full underbody piping and conduit
Separate grab irons and handrails installed at the factory
Etched-metal grilles, where appropriate
Lit number boards, headlights and green and white class lights
Lit control stands and full cab interior
Operating Gyralite or red Mars light, where appropriate
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options
Now with a TCS Sound Decoder featuring Rapidos exclusive
Alco 244 sounds, programmed to operate seamlessly with
Rapidos other sound-equipped locomotives.
HO GE C30-7 - DCC Ready - Conrail #6608
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.10 (8pcs pkg)
1/8 inch Open Web Truss - Warren Style (2pcs)
Excellent for towers and booms. Also good for roof trusses, bridges, conveyors, and space frames. Tee flange on one edge only allows easy registered assembly for triangular and square sections as pictured at left. Protruding side of flange may be removed if desired. Precision Injection Molded in Dark Gray ABS Plastic.
Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/8 in
HEIGHT IN MM
3.2mm
WIDTH IN INCHES
3/16 in
WIDTH IN MM
4.8mm
THICKNESS IN INCHES
.015 in
THICKNESSS IN MM
0.4mm
LENGTH IN INCHES
3-1/4 in
LENGTH IN MM
80mm
HO RTR PS 4740 Covered Hopper - Great Northern #171556
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Body-mounted McHenry operating scale knuckle couplers
36inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Multi-packs feature unique road numbers
Weighted for optimum performance
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
HO B-50-15 Boxcar - As Built w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #15371
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
HO NSC 60ft Ingot Flat Car - RTAX Ebenezer Railcar Services
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
HO SD75I - DCC Ready - BNSF #8300
Detailed Information
ROADNAME AND ROAD NUMBER SPECIFIC FEATURES:
BNSF FEATURES:
Purchased in 1997, BNSFs only order of SD75Is was numbered 8276-8301, and they bore a close resemblance to the SD75Ms, which came before. Perhaps the biggest difference was the use of the isolated cab, seen as rubber gasket running down the side of the nose. This was thought to increase crew comfort by isolating them from the noise and vibration of the engine compartment. All of the locomotives were delivered in the Santa Fe Warbonnet scheme, but with large -BNSF- letters on the side-creating a mix of old and new that was particularly suited to these locomotives. Their primary assignment was coal traffic, although it was not uncommon for them to stray westward on other types of BNSF trains.
All road numbers:
SD75 body with turbocharger bulge on firemans side
Freight type brakewheel
K-3 horn
Isolated cab with low mount headlight
Angled cab door with window
Octagon dome antenna
Spare knuckles on rear pilot
Jacking pads with AEI tags
Large emergency fuel cutoff button
Salem air filters
Round dial fuel gauge located in middle of tank
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Operating ditch lights
MU receptacles and cables per prototype
Pilot face spare knuckles and brackets per prototype
Early or late anticlimbers
3 or 4 step walkways
AEI tags mounted on the frame or jacking pads per prototype
Safety tread on the walkways
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Anti-glare panel painted on the nose
Windshield wipers
Tinted or clear cab windows per prototype
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Standard or Freight-style brake wheel
See-through radiator fans
Lift rings
Factory installed wire grab irons
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Dual sanding lines
Rear pilot drop grab iron (MU hose retainer) pre prototype
DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Incandescent bulbs for realistic appearance
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Recommended radius: 22inch
HO 1 Amp Board Replacement Mobile/SoundFX/Function Decoder for Kato F40PH HO Locos
SoundFX®/Motor/Function Decoder Features:
- Preloaded with F40PH Sound Scheme
- Replaces SDH104K1C & SDH104K1C C decoders (no FN04K1 needed)
- Full Digitrax Series 3 mobile decoder feature set
- Speed Tables
- Simplified Scaleable Back EMF
- Advanced Consisting
- Transponding
- Supersonic Motor Drive
- Decoder LockFactory Reset Feature
- Includes 28mm 32 Ohm speaker
- Includes 330uF capacitor
- Fully customizable sounds
- Use PR3 and SoundLoader Software to download your own sound scheme to the decoder
- No external sensor required for sound workload changes
Visit Sound Depot to learn how to customize sound projects and download sound projects into your Digitrax SoundFX decoder!
HO ICC B&O I-18 Steel Bay Window Caboose - Chessie System (B&O -Gold Chessie Safety- 1974+) #C-3010
Product: ICC B&O I-18 Steel Bay Window Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Gould Caboose Roller Bearing with separate brake beam part
Wheels: CNC-Machined 33inch Wheels
Chessie System (B&O) (Gold Chessie Safety 1974+) continues our foray into the world of accurate Chessie Safety Cabooses. The B&O DuBois Shops painted C-3010 into this eye-catching gold and silver combination in January of 1974. The caboose features the -SAFETY IS A FULL-TIME JOB- slogan. Chessie Safety cabooses ran system-wide and were even part of an employee spotting contest in 1974, where the winner who spotted the most cabooses won a clock radio! 1974 era-appropriate underframe details include the toilet dump pipe and battery box. Lighting features on our model include prototypically dim interior lights as well as lit Pyle lanterns.
HO - Siemens ACS-64 - DCC & Sound - Amtrak/Demonstrator (Flag)
Features:
DCC sound-equipped ACS-64 includes a TCS WOWSound CD-Quality 16-bit 44,100Hz decoder with Audio Assist
Sounds package includes: horn, bell, cooling fan/power inverter, pantograph extension and retraction, coupler close/release, brake release and application, momentum, crew alert, grade crossing quill, departing and arriving station announcements, and more
Keep-Alive device for uninterrupted operation, even over dirty track and remappable light functions, die-cast frame, and selector switch for choice between rail and pantograph operation.
Performs best on 22inch radius curves or greater
HO Scale 1:87
Product Measurements: L 9.5 in., W 1.5 in., H 2 in.
Retail Package Measurements: L 12.5 in., W 2 in., H 3.5 in.
HO 17,360 Gallon Chlorine Tank Car HOKX
FEATURES:
-Brake rigging molded separately
- Scale handrails
- Metal safety bars, tank fittings and safety placards
- AccuMate couplers
- Screw-attached 100-ton roller-bearing trucks for added reliability
- Accurate painting and lettering
- Brake wheel chain
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) (6pkg) #1
Road Numbers Included: 286280, 286307, 286320, 286346, 286365, 286401
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
HO EMD SD9 - DCC & Sound - Chicago, Burlington & Quincy #834
-white frame
Chicago, Burlington & Quincy
- Phase IV (First time for a plastic model!)
- Higher short hood with a corresponding cab height
- Cornered-off section on the long hood behind the cab
- Two 48inch radiator fans as opposed to the normal (four) 36inch fans
- Conduit pipes were removed from the top of the radiator
- No ladders on the short hood end
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO 85ft Pullman-Standard Regal Series 4-4-2 Sleeper - Lighted - BNSF (Cajon Pass) #66
Passengers on your Walthers Proto Combined Super Chief/El Capitan are sure to have a memorable trip aboard the 85ft Pullman-Standard 4-4-2 Regal series Sleepers! Santa Fe purchased 16 of these spacious sleepers, fitted with four double-bedrooms, four compartments, and two drawing rooms for postwar Super Chief service, which were later used on other name trains and served with Amtrak.
Ready for operation or display, features of this Walthers Proto replica include:
- Real metal finish simulates stainless steel
- Correct GSC 41-NDO Outside Swing Hanger trucks as used in the 1960s
- Factory-installed grab irons
- Prototypically accurate window tinting
- Window gasket details as appropriate
- Sprung operating diaphragms
- Modeler-installed extended drawbars for 22 inch radius curves included
- Turned metal RP-25 wheelsets and correct trucks with built-in electrical contacts
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24 inch radius is recommended for operation.
HO 60ft Bulkhead Flatcar - PGE #16002
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
HO Modern Yard Tractor - Atchison, Topeka, & Santa Fe #5344
Completely assembled
Many separately applied parts
Interior details
Rubber tires
Photo-etched steps and rear deck
Adjustable 5th wheel height
Clear window glazing
As seen in intermodal yards around the country
PROTOTYPE AND BACKGROUND INFO:
A terminal tractor, also known as a yard tractor, is a kind of semi-tractor intended to move semi-trailers within a cargo yard, warehouse facility, or intermodal facility, much like a switcher locomotive is used to position railcars.
HO Right Curved Track w/10-degree Radius - 34 1/8in (867mm)(2/pkg)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes! Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation.
Suitable for all types of layouts, temporary or permanent, this modular track system features an integrally molded roadbed for realistic appearance.
Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
HO 53ft Railgon Gondola - Conrail #587236
(Boxcar Red, white, Quality Logo)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - SOO Line #136180
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
F-Unit Sunshade, Etched Brass - pkg(6)
HO Master MP-36 - DCC/Sound - Metra (Milwaukee Road Hiawatha) #405
Features:
- Golden-white LEDs
- Realistic die-cast underframe
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Realistic lighting effects including ditch lights and in-cab light
- Metal knuckle couplers
- Detailed cab interior
- Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
- Coupler cut levers
- Multiple unit hoses and trainline hoses
- Recommended 22 inch radius with Atlas passenger cars
DCC Ready Units:
- Equipped with a speaker for easy conversion to sound with the addition of a decoder.
DCC ESU LokSound Functionality Features:
- Over 20 sound effects are available including Head-end Power (HEP), engine start-up and shutdown, prime mover sounds through all eight
notches, bell, air horn, air compressor, dynamic brakes and more.
- There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
Tangent Scale Models HO Greenville 86ft Quad Door Boxcar - PC- Delivery X-60-R 2-1970
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Penn Central (PC) -Delivery X-60-R 2-1970- offers another big paint scheme for our customers. A big PC logo dominates the center of these cars, with a stacked Penn Central on the far left. Fans of the Penn Central expect the best from Tangent, and we aim to deliver just that. This 1970-built Greenville group features accurate End-of-Car Cushioning details, Gypsum crossover platforms and truck mounted brake hardware. This X-60-R order rides on 70-Ton Barber S-2 Birdsboro Roller Bearing Trucks, with 33in wheels and accurate rotating Brenco-6 roller bearing caps. These cars were part of the GM Lansing Stamping Plant car pool, with a return-when-empty stencil the GTW in Lansing, Michigan. These beauties are available with eight different road numbers!
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127420
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
EJ&E #90406
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied wire grab irons
Working drop ends. Gently lift up & push inward to fold ends down.
Interior detailing
Weighted for trouble free operation
Machined metal wheels and RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
HO 1967 Ford Galaxie - Burnt Amber, White
Mini Metals - Assembled