HO Scale - 50/56 Mack LH S/A Tractor- Unpainted and Resin Cast Kit
Speaker Gasket Kit - 40 x 28.5 mm (4pk)
Package of four gaskets for mounting our 40 x 28.5mm oval speakers (P.N. 810078).
HO Hyundai 48ft Exterior Post - BNSF/HUB Group #684226
PROTOTYPE TYPE:
48ft Exterior Post containers were introduced in 1986 and were a common site on nearly all double stack container trains of the later 80s, 90s, and 2000s. These containers were used for domestic freight service and were purchased by numerous railroads and freight operators in large numbers. These containers were a unique design in which the front and side container panels were supported by aluminum channel posts mounted outside of the container box to provide additional capacity space for larger pallet stacks within the container interior. The posts are a simple spotting feature for these styles of containers. Hyundai was one of a handful of manufacturers of exterior post containers, and while nearly-identical in design to one of their competitors, the additional drainage channel on the top of the container at the head end, and full-height end corner posts differentiate this container from its competitors design. Some of these containers served secondary lives for more than one operator, leading to some interesting graphic combinations over their lifespans. Changes to over-the-road length allowances for 53ft containers and trailers brought about the eventual demise of the 48ft container and a majority of them were withdrawn from service during the mid-2000s and beyond, though limited numbers still remain in service today.
FEATURES:
Hyundai Roof Configuration Version:
A unique feature of the Hyundai design was the additional water drainage channel near the front end of the container and the forward vertical framing members that extended the full height of the container. We have modeled the detail that differentiates this container from those of other manufacturers of 48ft exterior post containers.
Sharp And Accurate Paint And Lettering:
Classonemodelworks.com provides accurate paint and lettering taken from photographs of the prototype, and numbering that matches the class numbers for each operator or railroad. Our containers come with the exterior posts already painted to match the aluminum color of the prototype containers and galvanized coloring for the upper and lower structural channels.
Accurately Dimensioned:
These containers have been accurately reproduced from hand-measured field dimensions of the actual containers, right down to every visible detail. Classonemodelorks.com stands for accuracy and we strive to provide that with every model we produce.
Accurate scale Door latching Details:
Classonemodelworks.com believes in providing models that accurately depict the prototype equipment. Keeping that as our core, we are proud to provide highly-detailed cast door locking bars, latching mechanisms, door bumpers and angled bar lifter.
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20372
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO/N Flexible Dark Red Brick Pavers Sheet (2-Pack) - Small
Product Information
The Chooch Enterprises Flexible Brick Wall Sheet is hand cast in super-detailed flexible vinyl. Easy to use, each pack comes with peel and stick permanent adhesive, which adheres to any flat, smooth surface. Thin material is easy to cut with a No. 11 blade or scissors. Brick sheets are painted in a base wash of color. Use the sheets right out of the package or paint with water-based acrylics. Each sheet measures 3-3/4 x 12inch 9.5 x 30.5cm. Three sizes of sheets are available with this texture: Small for N and HO Scales; Medium for HO Scale; and Large for HO, S and O Scales. Flexible Brick Wall Sheet 2-Packs are part of the extensive line of Chooch flexible walls and paving sheets.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Seaboard Air Line #19792
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO EMD SD7 - DC/Silent - Southern Pacific (Black Widow) #5323
Southern Pacific
- Steam generator equipment details on short hood
- Correct Mars style -ash can- light on both ends of the locomotive
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
4785 PS2-CD Covered Hopper - Early End Frame - Penn Central - Green Repaint #886924
HO RTR 65Ft 6inch Mill Gondola - Lehigh Valley #34277
MODEL FEATURES:
Working drop ends. Gently lift up & push inward to fold ends down.
Separately applied wire grab irons
Interior detailing
Decorated models fully-assembled and ready to run out of the box
Machined metal wheels and RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Minimum radius: 18inch
SD70M-2, CITX #140 - DCC & Sound - SoundTraxx Tsunami2 sound
New for the SD70ACe and SD70M-2, LED lighting
Antenna Dome
Early cab
Nose mount headlight
Nose door with no window
Early handrails
New for the SD70ACe and SD70M-2, LED lighting
Correctly-sized operating ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or tube style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Jacking pads per prototype
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
HTCR or HTSC trucks per prototype
Non-sound QuickPlug equipped with NEM 21-pin DCC plug
McHenry scale knuckle spring couplers
Minimum radius: 18 inch
Recommended radius: 22 inch
HO 1958 Cu Ft 2 Bay Covered Hopper - Open sides
Polybor-Chlorate NAHX #30516
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
HO - Air Hose - Standard Type, Brass
Use on locomotives, tenders and cars.
HO Trailer Train (TTX) - 50Ft, 60Ft, 68Ft, 85Ft, & 89Ft Flat Car, Boxcar Red Scheme - Decals
Circa: 1960s
Scale: HO Scale
Description: Trailer Train (TTX) - 50Ft, 60Ft, 68Ft, 85Ft, & 89Ft Flat Car, Boxcar Red Scheme. - Waterslide Decal - HO Scale
N Scale Single Track Truss Bridge - 9-3/4inch(248mm) - Gray
Comes completely assembled. Measures 9-3/4 x 1-1/4inch (24.3 x 3.1cm).
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated.
Theres no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and youre ready to go.
North American-Style - Code 83 #6 Turnout - Streamline - Right Hand, Unifrog
HO Steel Railroad Bridge Tower Bent 2-Pack - Kit
Product Information
Walthers Cornerstone Steel Railroad Bridge Tower Bents are just the thing for constructing impressive steel viaducts on your layout. This kit includes parts for two tower bents used for supporting deck girder bridges of varying lengths.
Add realism to your HO railroad with the Cornerstone Engineered Bridge System!
Part of the Cornerstone Engineered Bridge System.
Common prototype design used with various types of bridges
Fits steam, diesel and modern-eras
Highly detailed parts
Easily cut to three different heights
Two sizes of concrete pedestals included
Use with Cornerstone Standard 30Ft, 50Ft and 70Ft Deck Girder Bridges (each sold separately) to model a continuous viaduct
Each Steel Railroad Bridge Tower Bent measures:
Width at Base: 4-1/2inch (11.4cm)
Width at Top: 1-13/64inch (3cm)
Height: 10inch (25.4cm)
Footings Large: 29/32inch (2.5cm)
Tall Small: 1/2inch (1.5cm)
Photo shows a typical viaduct modeled with Steel Railroad Bridge Tower Bent 2-Packs (933-4555), and 70Ft Standard Level Single-Track Railroad Deck Girder Bridges (933-4507), each sold separately:
HO 85ft ACF 48-Seat Diner - Lighted - Union Pacific (City of Los Angeles) #4808
Union Pacific Heritage Fleet
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
Built as Lunch Counter Cafe Lounge in 1959 and originally numbered 5015, this car returned to special service as the Overland in 1988, named for UPs Overland Flyer and the later Overland Limited, which were both named for UPs Overland Route.
HO SD60 - DCC/Sound - Chicago & North Western/Operation #8029
MODEL FEATURES:
Locomotives come with railroad-specific details including: Operating beacon (in DCC/Sound version), horn, winterized hatch, antenna, handrails, etc.
SPECIFICATIONS:
DCC: Equipped with Econami2
PROTOTYPE MANUFACTURER: EMD
Axles: 6
LIGHTED: LED Lighting
PROTOTYPE AND BACKGROUND INFO:
In 1984, Electro-Motive (EMD) introduced the 60 series locomotive. These had many improvements over the earlier models including features such as: New and improved EMD 710 power plant producing 3600 HP, wheel slip control, computerized cabinet replacing the older and unreliable components.
This design spawned into many other upgrades within its class like the modernized wide cab, Isolated cab, and even the start of AC traction technology.
These locomotives were suited for just about any mainline service that could be thrown at them. The model was fairly popular with class one railroads, with Norfolk Southern purchasing the most at 151 units. Most of them are still in service today. Norfolk Southern in 2010 started a large full rebuild program of their SD60s (including purchasing cores from other sources) into SD60Es, which rebuilt them from the frame up with new electrical components and a newly designed cab to improve visibility and forward crash impact safety.
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Delaware & Hudson - Lightning Stripe #5000
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO RTR ACF 4650 3-Bay Hopper - Penn Central #886729
Date: NEW 11-65
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
12 inch Long Round Music Wire - 0.047inch Diameter pkg(3)
Round Music Wire - package of
Outside Diameter: 0.047inch
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.03 (10pcs pkg)
Acrylic Paint - B&M Blue (1oz)
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
Aluminum Mitre Box - Wide Slot
.031inch
HO New Look Bus Winnipeg Transit
Destination Sign:
47 Tanscona Downtown
Detail Variations:
Standee Windows
Partial EIP package
4-window exit door
Late-style engine door
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16000
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
UPS Freight - Grey, Gold, Brown
Product Information:
Licensed replica of popular International(R) trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled & painted
Die-cast metal and plastic parts
This medium-duty truck line was introduced in the late 1980s. Powered by a Navistar DT inline six-cylinder diesel engine capable of up to 350 horsepower, the 4900 series has been a great starting point for a wide range of commercial vehicles, including delivery vans, single- and dual-axle semi tractors, as well as fire apparatus and other government applications.
N Scale Bettendorf Truck Sampler Pack (3 Pair)
DESCRIPTION
N Scale Package includes 1pr short, 1 pr medium and 1pr long extension (#1000, 1002 & 1003) assembled Magne-Matic couplers.
SceneMaster - Static Grass Flocking - Dark Green 1/16inch 1.5mm Fibers
Model more realistic grass in minutes in any scale
Great for lawns, farm fields, railroad and highway right-of-way and more
Six realistic colors - made exclusively for Walthers by Noch
Easily applied with Noch Static Grass Applicators, Grass Dispenser Bottle or Gras-Master 2.0 (each sold separately)
3-1/2 Ounce 100g reclosable plastic bags
HO 35Ft Fruehauf Integral-Post Volume Van - PRR: 1950s #35 C 537
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
70-Ton 14-Panel 3-Bay Hopper - Ready to Run - Detroit & Mackinac #5482
Bowser HO Scale ready-to-run 70-Ton 14-Panel 3-Bay Hoppers are based on typical cars used by many railroads across the continent for hauling coal and aggregates. These layout-ready cars feature accurate decoration, molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton 14-Panel 3-Bay Hopper is a great addition to your 1950s and later diesel-era car fleet.
GP40-2 - DCC Ready - GT #6419
Detailed Information
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; were excited to include new features often requested, to the GP40-2 and upcoming Genesis models.
GTW FEATURES:
Former DT&I units; see above for major spotting features
#6408:
Front class lights removed.
#6410:
Front class lights retained.
Era: 1980s+
#6420:
Front class lights removed. Replacement horn & radio antenna. Retrofitted with ditch lights and waste retention tank.
Era: 2000s+
#6419:
Retained gong bell on nose. Retrofitted w/ large snowplow.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
PROTOTYPE SPECIFIC INFORMATION
By the early 1970s, many first generation diesels were reaching the end of their service lives. The most common replacement locomotives became the GP40-2. EMD began production of the 16-cylinder, turbocharged, 3000 horsepower engine in 1972. These locomotive were developed for service where higher horsepower and faster service were preferable. A major feature for the GP40-2 was the introduction of the -dash 2- modular electrical cabinet. For more than 40 years, the GP40-2 has worked main line freights, locals, switching jobs, yard service, and helper service. Many remain in service today.
HO 89ft Thrall Bi-Level Auto Carrier - BNSF #300320
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
HO 53ft Stoughton Container - HUB/White (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stack-able
- Separately applied door closure rods
- Each container individually numbered
- Razor sharp printing and painting
PROTOTYPE INFORMATION:
An intermodal container (also known as a container, freight container, ISO container, shipping container, hi-cube container, box, sea container, container van) is a standardized reusable steel box. Intermodal containers are used to store and move materials and products efficiently and securely in the global containerized intermodal freight transport system. Intermodal indicates that the container can be used across various modes of transport, (from ship to rail to truck) without unloading and reloading its contents. Lengths of containers, which each have a unique ISO 6346 reporting mark, vary from 8 to 56 feet (2.438 to 17.069 m) and heights from 8 feet (2.438 m) to 9 feet 6 inches (2.896 m). There are about 17 million intermodal containers in the world of varying types to suit different cargoes!
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended.
HO Upright Soda Machine w/Case - Moxie
Painted and labeled upright soda machine in Moxie brand.
N Scale Valley Growers Association - Kit
Product Information
Rural grain elevators like the prototypes for the Walthers Cornerstone Valley Growers Association were somehow more than just a trackside industry. The elevator was, and in some place still is, the center of many rural communities. And in a few places it WAS the community. Handling grain from local farms and selling it to distant markets, many of these older buildings are still active today as stand-alone facilities or as part of larger grain and feed mill complexes that sprouted up around them. Steel elevators came into use in the 1920s as steel sheets became affordable. In fact, many wooden elevators were sheathed in steel for fire resistance. With its colorful signs and period styling, this corrugated-metal elevator is perfect for your layout and your favorite era from the 1920s to today. The kit includes the main elevator, plus a wood storage bin and wooden office, all with realistic wall textures. Separate doors and windows add to the realism, along with colorful decals for several grain companies. If your steam or diesel-era railroad hauls grain then you need the Valley Growers Association grain elevator along your line.
Realistic corrugated-metal construction
Includes elevator, office and trackside storage bin
Use with other Walthers Cornerstone grain handling structures
Easy-to-build plastic kit
Molded in appropriate colors
Elevator: 9-3/8 x 4-1/2 x 6-5/8inch (23.8 x 11.4 x 16.8cm)
Storage Bin: 4-1/4 x 2-3/8 x 2-1/2inch (10.7 x 6 x 6.3cm)
Office: 1-5/8 x 7/8 x 1inch (4.1 x 2.2 x 2.5cm)
HO NSC Ballast Hopper - Union Pacific (Late) #919085
1990s+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
Right Hand
Powered solenoid turnout machine
HO H-6-G - DC/Silent - Canadian National Railway (Straight Wafer) #1389
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO Duplex Sleeper - Canadian National - Wet Noodle #1136 / Endeavour
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
N Scenic Accents - Firemen to the Rescue - Scenic Accents(R) -- pkg(4)
Bring your layout to life with N scale Scenic Accents figures and accents that tell your layout story with authentic detail.
HO MLW M630 - DCC & Sound - BC Rail #705
R-W-B Hockey Stick, recessed nose ditch lights w/external air filters
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound V5 decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SECX (6 pkg) #12
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
2305
2308
2312
2315
2320
2330
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - IWXX (Hunter Green) #220057
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO GP9RM - DCC & Sound - Canadian National (Large Noodle) #7006
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
Flat Brushable Acrylic - Flat Light Blue - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
HO 130Ft 2-Stall Diesel Engine House - Kit
Product Information
Keep your HO diesel fleet ready for the road with the Cornerstone 130Ft Brick Diesel House. Typical of purpose-built facilities that began appearing in the 1930s and are still used today, this detailed structure kit features:
Based on a Milwaukee Road prototype - similar facilities used by many railroads
Fits layouts from the 1930s to the present day
Must-have structure for engine terminals and shops
Easily adapted to other types of industries
Separate office can be installed on left or right side
Slotted base accepts popular rail sizes (rail sold separately)
Modeler-installed under track inspection pits
Separate windows, doors, roof vents and downspouts
Molded in three colors
Measures:
Main Building: 18-1/2 x 8-1/4 x 4-3/4inch (47 x 21 x 12cm)
Track Centers: 3-1/4inch (8.2cm )
Office: 7-3/16 x 3-11/32 x 2-13/16inch (8.5 x 18.3 x 7.1cm)
HO Doors (White Styrene) - Entryway Type w/Single Large Window - pkg(3)
HO New Look Bus - GO Transit (Toronto) Early - Toronto via Islington Subway - Deluxe #1014
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
SmokeBox Graphics HO DF6287 INTX Patch Jobs
Mini set with reporting marks and road numbers for INTX patch jobs (typically covered hoppers). Set includes a large number jumble in the most common black serif stencil style with additional lettering in four other styles. Sized for both car sides and ends
HO EMD SD10 - DC/Silent - Milwaukee Road #553
Milwaukee Road
- SD10 model designation given by Milwaukee Road for their capital rebuild program of their old SD7s and SD9s
- A first in HO Scale plastic models
- Single fuel tank
Chopped short hood and modified cab
- Later style Horst air intake
- Rotary beacon
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO Code 100 Streamline Large Radius Left, Electrofrog
Nominal radius 1524mm, angle 12 degrees, length 258mm
HO GP38-2 - DCC/Sound - EMD Lease #813
EMDX FEATURES:
- Built as Penn Central
- Lighted class lights
- Lighted number boards
- Correct horn per road number
- Short fuel tank
- Sinclair antenna
ROAD NUMBER SPECIFIC FEATURES:
#788
- Ex-CR #7988
- mid phase w/ chicken wire grilles
- Operation Lifesaver
- Leslie 3-chime horn
- front small EMD plow
- rear Weed-cutter plow
- unique scheme
#813
- Ex-CR #8013
- mid phase w/ chicken wire grilles
- 4-stack exhaust
- Nathan 3-chime horn
- front small EMD plow
- rear Weed-cutter plow
- black fuel/air tanks
- small cab numbers
#825
- Ex-CR #8025
- mid phase w/ chicken wire grilles
- Nathan 3-chime horn
- front Weed-cutter plow
- maroon fuel/air tanks
- large cab numbers
- named The Kristen
GP38-2 SERIES LOCOMOTIVE FEATURES:
- Operating Class Lights
- Operating Number boards
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
Nickel Silver Transition Track - Code 100 to Code 83
Product Information
Add a realistic variety of rail sizes to your HO Scale layout with this WalthersTrack accessory, that smooths the transition to and from different sizes of rail. Perfect for yards and sidings, it comes fully assembled with prealigned sections of both Code 83 and Code 100 rail and features:
Ties molded in realistic dark brown with enhanced wood grain detail
Fine profile molded spike and tie plate details on each tie
Spike-mounting holes positioned next to the rail
Molded starter points on underside of ties for fasteners
Custom formulated nickel silver rail for outstanding electrical conductivity
HO Scale G2 AC4400CW - DCC Ready - Union Pacific #6289
Detailed Information
UP FEATURES:
Primed for Grime
GPS pod
Replaced AC unit in UP yellow
Regular spare knuckle holder on rear pilot
The Union Pacific acquisition of the Southern Pacific in 1996 saw the transfer of SP newly acquired AC4400CWs to a new railroad. As they were essentially brand new, there was no push to repaint these units and they existed for several years without modification. Eventually the AC4400CWs were renumbered with simple patches over the SP paint, but as this was done on a unit-by-unit basis where they were, the patches all had a measure of uniqueness.
ROAD NUMBER SPECIFIC FEATURES:
#6193
Formerly SP 138; Wears two UP shields on the nose (sometimes referred to as cheek shields), UP shield on rear patched in yellow reporting marks in grey faded grey and red to represent the significant sun-bleaching these units received.
#6289
Formerly SP 289; Infamous -Flaming Patch-Job- unit with a distinctive stylized flames on rear of locomotive, Single UP shield over faded SP logo on front yellow sill stripe modern PTC Antenna boxes.
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO 60ft Hi-Cube Plate F Boxcar - BNSF #761313
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline(R) 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO AutoFlood III RD Coal Hopper - UP/CMO (6pk) #1
Includes the following numbers, all individually packaged:
#504250
#504273
#504288
#504294
#504302
#504395
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Modern Freight Cars by Jeff Wilson
In Modern Freight Cars from Kalmbach, noted modeler and former Model Railroader Magazine staffer Jeff Wilson provides an overview of freight cars from the 1960s through today. This is an essential guide for model railroaders who model the 1960s through today, as well as railfans and freight train enthusiasts. The book features more than 200 photos and covers various types of cars, including boxcars, hoppers, and gondolas, and how they evolved, as well as new car types, including intermodal cars and 89-foot auto tracks. Modern Freight Cars: Rolling Stock from the 60s Through Today also gives a deeper look into how different industries use freight cars, when cars entered service, and the dates when rules and restrictions took place. Other topics include:
Freight car evolution (size and weight increases; new car types)
Car components (brake systems, trucks, and couplers)
Hi-cube and specialty boxcars
Intermodal cars (flat, spine, and well cars)
Open and enclosed auto racks
Mechanical and cryogenic refrigerator cars
Center-beam flatcars
And much more!
HO International 4300 Utility Truck w/Bucket Lift - Assembled - White
Colorful railroad logo decals sized to fit for quick conversion to maintenance-of-way service including BNSF, CN, ATSF, BN, CP Rail, CNW(TM), NS, Chessie, DRGW(TM), MILW, KCS, CR, CSX, SOU, SP(TM) & UP(R)
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Position-able Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
Introduced in 2002 to replace the 4000-series trucks of the 1990s, the medium-duty 4300 was built in three variations and became a very popular chassis for a variety of commercial applications. Today, they are still in production as the International Durastar.
HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140068
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 4750 Cubic Foot Rib-Sided 3-Bay Covered Hopper - KCS #307572
These ready-to-run cars feature injection-molded bodies with separately applied metal grab irons and etched metal roofwalks! Cars include trucks and brass wheelsets, weights and Kadee #5 magnetic knuckle couplers.
Kit - 6-3/4 x 15-3/8 x 10 inches 16.8 x 38.4 x 25cm
Molded in 4 Colors & Clear Plastic
Rooftop Elevator Sheds & Clerestory
Molded or Fine Printed Windows
Great for Dockside & Industrial City Scenes
HO GP18 - DCC & Sound - Grand Trunk Western #4704
Detailed Information
GTW FEATURES:
Winterization Hatch
Beacon
Bell mounted on long hood end
Sinclair antenna
Separate, optional ACI labels
Canadian style handrails
Separate, optional spark arrestors included with model
These units were part of an 8-unit order that arrived on the GTW in February 1960. They were part of the general freight pool of locomotives and were often seen working with their GP9 predecessors.
GP18 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Accurately-painted and printed paint schemes
Body-mounted McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO Scenic Accents - People Talking (6)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
The people in this set seem to be conversing. An elderly woman has a sweater over her arm. A man stands next to another woman with his arm around her shoulder. A woman waves, while two other men get about their business.
Perfect for moving bulk loads of all kinds that dont require protection from the weather, the WalthersMainline 34ft 100-Ton Two-Bay Hopper is a versatile addition to HO operations!
One time run of these road numbers, order now - limited quantity available!
In service from the 1970s to the present
Used to haul ballast, sand, gravel, ore and other bulk loads
Factory-applied door and brake details
Heavy die-cast metal underframe
Add a realistic load in minutes with the cast resin Chooch Gravel Load (214-7292) sold separately
Correct 36in RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
N Scale ACF 3560 Center-Flow Covered Hopper - Duluth Missabe & Iron Range DMIR #5019
Features:
Prototypical painting and lettering
Plastic body with die cast chasis
Removable coal load
Product Information
The Atlas Trainman ACF 3560 Center-Flow Covered Hopper is based on common steel cars used by many railroads for handling potash, fertilizers, chemicals and more. It features an injection-molded body with applied plastic details where appropriate, smooth paint, crisp lettering and AccuMate(R) knuckle couplers.
CP RAIL (1968 to early 1980s)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
HO Coalveyor Bathtub Gondola - David Joseph (Teal) #30960
FEATURES:
Die-cast chassis
Ready-to-run
Interior bracing
Removable coal load
AccuMate couplers
Brake detail
100-ton roller-bearing trucks
Fine scale wheels
Accurate painting and printing
These cars were usually run in blocks of 4-12 units, carrying
construction and demolition debris.
HO CA-9 ICC Caboose w/Lights w/DCC & Sound - Union Pacific #25629
ETA: August 2021
Detailed Information
PROTOTYPE AND BACKGROUND INFORMATION
Built by International Car Company in 1967, UPs CA-9 class numbered 100 cabooses. The cars were very similar to the earlier CA-8 and later CA10 designs, but had minor differences in end cages and windows. The cars originally featured square safety slogans, and these were later changed to rectangular slogans. The eye-catching safety slogans made the cars distinctive; the later slogan boards were removable and could be swapped from car to car, meaning that certain road numbers wore several over the course of their lives.
ROAD NUMBER SPECIFIC FEATURES:
#25658, 25668, 25661 Early slogans, P on cupola representing Pool service,unique scheme with 14 inch reporting marks and 8-inch -Union Pacific-, as- built or modernized cupola windows as appropriate
#906251 MOW Office car, painted -Kenefick green,- Era: 1990s+
#25629, 25616 Later rectangular slogan boards, red P on cupola representing Pool service, modernized windows, Era: late 1970s+
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - IWXX (Hunter Green) #220016
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 12Ft FMC 5327 Plug Door Box - Canadian Pacific #224197
All new tooling with accurate dimensions
Photo-etched cross-over platform
Separately applied grab irons, end ladders and brake wheel
33in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
All models are representative of prototypical paint schemes
Minimum radius: 18in
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of ?In Service? equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
PROTOTYPE AND BACKGROUND INFO:
It was the mid 1970s, and the incentive per diem box car boom was just beginning. New, brightly painted box cars seemed to appear overnight. Many were lettered for various short lines. FMC (Food Machinery Corporation) was a significant builder of many of these cars. The 50? outside post, non-terminating end box car, became the foundation for new per diem cars built in the 1970s. The 50? FMC cars also varied in door configuration and style to better suit each customer. These models can still be seen today in the modern railroading scene.
N Scale 52Ft Mill Gondola - C&O Railgon #351342
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
Woodland Scenics Figures HO Campers - Scenic Accents(R) -- With Tent & Accessories
Early - Staley #35094
Union Pacific Harriman #9004
Built new in 1955 by American Car & Foundry, UP 9004 was set aside for special assignments in 1974. In 1987, the car was named Harriman in honor of Edward Harriman and his sons Averell and Roland, who all served as Directors of the company. From 1989 to 1990, the car was named Sun Valley.
Flags (11) and Mailboxes (8) - 48-Star American flags from 1912-1959
These SceneMaster accessories are a great way to detail any modern HO layout! The set includes 10 small and one large flag printed in full color and complete with poles, perfect for display at schools, homes, factories, businesses and all types of government and public buildings. The set also includes eight mailboxes (4 open and 4 closed) with posts, perfect for many city neighborhoods or farm homes.
Spray Can - Pearl Green (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Just Plug Lighted Vehicle - Blue Coupe
Out for a drive? This well mannered coupe has a little bit of a wild side!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
HO 100-Ton Open Hopper - Southern Pacific #481144
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
HO 60ft PS Flatcar - BNSF #584990
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .040In x 6In x 12In (2 pcs pkg)
HO FM H16-44, Standard DC, Canadian Pacific: Action Red Scheme No.8709
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO Trinity 3230 Covered Hopper - General American (GACX) #62758
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
HO 13,600 Gallon Acid Tank Car - Procor/White (PROX) #16522
ETA: July 2023
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
N Scale TM Flatcar W/Stakes - CP Rail - #421760
PROTOTYPE INFORMATION: The Atlas Trainman 50? Flat car represents a general purpose flat car built in the 1950s. It could be found hauling many different types of commodities. The pockets along the sides of the car could be used for holding down cargo with chains or straps. Optionally stakes could be inserted into these pockets to help contain irregular loads such as logs.
These cars lasted for many decades and could often times be found in maintenance of way (MOW) service near the end of their lives.
MASTER MODEL FEATURES:
- Accumate Couplers
- Crisp painting and printing
- User installable stakes
HO EMD FT A+B Set - DC/Silent - AT&SF (Freight Scheme) #103 + 103A
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
Gunderson Multi-Max Auto Rack - CP SOO
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
HO 40ft Hi-Cube Corrugated Side Container - APL
(Eagle Logo)
This Walthers SceneMaster HO Scale 40ft Hi-Cube Corrugated-Side Container will add a modern touch to your intermodal terminals, highway scenes and railroad operations. Ready for service on your layout as loads for WalthersProto and WalthersMainline well cars and container flatcars, additional features of these 40ft Corrugated Containers include:
- Improved door latch detail
- Great detail for terminals and industrial scenes
- Realistic loads for any well car
- Ready to use
HO NSC 3800 Covered Hopper - TH&B (Delivery Scheme) #1515
They are back, again! The famous Rapido 3800 cu.ft. Cylindrical Hoppers make a triumphant ~THIRD~ return with new road numbers and paint schemes!
FEATURES INCLUDE:
- Round-hatch or Trough-hatch design
- Correct Dofasco S-2 100-ton trucks
- Two body variations with 6- or 11-side panels
- Three brake equipment variations and optional additional air reservoir on NSC cars (if applicable)
- Etched running boards and brake crossover platform
- Factory-installed air pipes and coupler cut levers
- Finely molded plastic walkway supports and end cages
- Full separate air piping and brake equipment details
12inch Long Round Aluminum Rod - 1/2 inch Diameter
Round Aluminum Rod - not hollow (1 pc)
Outside Diameter: 1/2 inch
HO Industrial Storage Tanks - Kit
FEATURES:
- Quick and easy detail for factories old or new
- Install at ground level or on rooftops for added realism
- Parts to build five complete tanks:
- Two vertical tanks with piping
- Wall-mounted tank with compressor/regulator
- Small horizontal tank with piping
- Large horizontal tank on pedestals
Spray Can - German Gray (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
354 HO Scale - 47/53 Chevy Half Ton Flatbed- Unpainted and Resin Cast Kit
HO Trinity 3230 Covered Hopper - Lafarge North America (LAFX) #60143
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
ESU 50341 Speaker set, Single 11x15mm, Modular Soundbox kit for 20mm, 23mm, 16x25mm
With our new modular speaker baffle set suitable for a single miniature speaker you can easily assemble your tailormade speaker baffle for two miniature speakers. Both – diameter and height – can be individually adapted to suit your needs. Even with one speaker the audio pressure is considerably better than with one circular speaker intended for these dimensions.
The popular sugar cube speaker 11x15mm and 8 Ohm impedance is supplied with a sealed mounting plate. First select one of the three base frames subject to the type of speaker you want to assemble, namely a circular frame with either 20mm or 23mm diameter or a rectangular type with 16x25mm. After you have inserted the speaker into the base frame you may now determine the height of the speaker baffle. The minimum height is 6mm, which can be raised to 8mm, 9mm, 10mm, 11mm or 13mm by adding up to three intermediate frames. The set contains two 2mm high and one 3mm high intermediate frame. They can easily be fixed with some glue suitable for plastic materials.
The higher the speaker baffle, the better the bass fidelity. It certainly pays off to utilize the entire space available.
HO Scale H1a Hudson Steam - DC/DCC Ready - Canadian Pacific (Delivery) #2800
-Early walkway w/smoke deflectors
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
Rounded Weathering Brush
HO RTR 52Ft Mill Gondola - CEFX #30258
Detailed Information
MODEL FEATURES:
Body-mounted McHenry operating scale knuckle couplers
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Razor sharp painting and printing
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO - Nathan Diesel Air Horn (Brass Casting) - 2 Chime K2
HO USRA Single-Sheathed Boxcar: C&O
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - DEAX #11312
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO FEF-3 4-8-4 - DCC & Sound - Union Pacific #844
Detailed Information
FEF-3 FEATURES
UP 835-844 came in 1944 as coal burners with 80-inch drivers, similar to the FEF-2s but with dual smoke stack and different front end pilot.
ROAD NUMBER SPECIFIC FEATURES:
#835
Solid Black
Oil Burner
Triple Stack
Smoke Lifters
Era 1952+.
#844
Oil Burner
Double Stack
Smoke Lifters
Era 2017+. High-Shine Black -Race to Promontory- version
as used in tandem with Big Boy 4014 on May 4 2019
as well as excursion service. Comes in a beautiful limited-edition box with special graphics.
STEAM LOCOMOTIVE FEATURES:
Illuminated number boards
Metal handrails
Builders plates
Adjustable cab windows
Non-operating classification lights
Blackened metal wheels
Oil burner
Accurate oil tender details
Feedwater heater per prototype
ATS cabinet per prototype
Swing coupler pocket
Double or triple smokestack per prototype
Single or double generator per prototype
Side rods colored to match the prototype
Illuminated red signal light except on 2016 version of #844
Boiler backhead with full details and printed gauges
Synchronized chuff, whistle, bell, blow-down, air compressor, dyno and pop-off valve sounds
User-controlled whistle, short whistle, bell, squeal, coupler crash, injector, water stop and light dimmer
Individually-applied detail parts, including brass-painted bell and whistle, piping, valves, generator, steps, air pump, air tanks, reverser and coupler lift bar
Front coupler pocket can be inserted to mount operating coupler
Minimum radius: 22inch
NEW FEATURES:
Dual cube speakers for great sound quality
Lighted firebox flicker effect with see-through firebox door
Upgraded headlight lighting with brighter LED
Improved loco-to-tender connection harness for increased durability and serviceability
SOUND EQUPPED MODELS ALSO FEATURE
Tender-mounted DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Chuff, whistle and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Metal Tire Changer/Air Dispenser - Pre-painted & Labeled
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX (6 pkg) #2
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
140078
140087
140089
140092
140094
140096
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Hare II (Feedback Version) - Stationary Decoder
The Hare V.2 has all of the features above plus feedback!
Digitrax LocoNet, NCE Cab Bus and Lenz Express Net feedback and position reporting options are supported.
FEATURES INCLUDE:
- Plugs directly on to Tortoise: Simplifies wiring and reduces failures.
- Auto Return: Automatically returns the points after a preset interval for any operational event.
- Auto Throw: Automatically throws points when a train is approaching against the points!
- Auto Throw Timer: Provides for timing the auto throw function to prevent two trains from colliding.
- Smart Route: Sets up to 13 routes by simple address programming in addition to the primary decoder address.
- Dispatcher Over-Ride: Allows the dispatcher to lock out all other switch commands.
- Lock Block Protection: Overrides the Hares operation if a designated block is occupied.
- Locked Route Control: Provides for only one route direction response for either a throw or clear
command.
- Switch Speed Control: Allows you to control the Tortoise motor speed.
- Smart Default Ops: Upon power-up, Hares return to either last thrown position or a programmed default.
- Operate switch signals or panel LED indicators.
- Manual Pushbutton or Toggle Switch: Allows single button or toggle switch manual control of the points.
- System Reset: A single CV command sets all addresses and CVs to original factory values.
- Direct Current Ops: The Hare will operate on DC using manual push button control option.
- Semaphore Operations: Allows the use of a Tortoise for triggered control of a signal head or crossing gate.
- Automates Reverse Loop Turnouts. Using auto throw feature.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23011
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Micro Mini Connectors - 2-Pin (2 sets)
12 Inch Flexible Leads
Fully assembled with mated interlock assembly. Great for lighting, wiring, command control applications, special effects wiring. Connectors and attached wires have polarity markings for use as an indicator. Not recommended for powering rolling stock or other high-current applications.
HO NSC Ballast Hopper - Canadian National (Branchline) #90116
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO Alco RS-3 - DCC & Sound - Maine Central - as delivered - #557
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. DCC/Sound version features LokSound V5 decoder.
HO GE 44 Tonner Phase Ic - DC/DCC/Sound - Boston & Maine (Minuteman) #117
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
1948-53 Chevy Good Humor Ice Cream Truck - Unpainted and Resin Cast Kit
HO Conrail (CR) G41A Repaint 1976 w/ Hoods PRR Shops G41A Coil Car
CR G41A Repaint 1976 w/Hoods illustrates an early CR repaint. Check out the thinner style CR logos, PC/CR style data stencils, and era appropriate ACI and PC/CR style double COTS. The early CR cars maintained their hoods for protection of the coil shipments. If you want to model the car later in their service lives, do not panic: The hoods are removeable. The interior troughs have all of that loading and identification data, too. The ends feature the original shorter style coupler lift bar brackets and Morton style crossover platforms. The 125-Ton trucks feature rotating Timken caps, 38in wheels and accurate brake beams with truck mounted brake details.
Also, these cars look great loaded with our all-new coil loads sold separately!
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
HO Thrall 2743 Gondola - CEFX (Ex-CP) #33430
FEATURES:
Prototypical scale height reflecting the new higher capacities standard.
Fourteen side posts
Detailed brake components
Etched platform
Etched end reinforcement plate
Detailed ladders and stirrups
Metal hand grabs
Metal brake rods
Air hoses
Corner pins and correct open notch
Detailed side post support angle plates
Optional coupler pocket for Kadee #78 or Accumate Scale Coupler
Accurate painting and lettering
Ready-to-run
HO Delivery G43A 2-1968 Gondola - Penn Central #576079
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inchh Wheels
PC -Delivery G43A 2-1968- in the original Penn Central green paint scheme, and a PC version we have not yet offered! These gorgeous models have 2 placards in place for the PC reporting marks, road numbers, and ACI label on the left side of the car. On the right side is an additional placard that includes a PC logo and Penn Central lettering. These placards are utilized on this class of PC car since these cars have side corrugations on each panel, where they knew that putting paint on the corrugations would not last very long! These cars have corrugated ends, and the Tangent replica includes oxide red car interiors ? on the interior walls and ends ? like the prototype. We even duplicated the slight green overspray on the inside end corners! The 100-Ton trucks feature accurate rotating -Timken- caps.
MicroBond Advanced Adhesive for Slippery Plastics - MicroPrep (1-1/2oz)
Made especially for gluing slippery engineering plastics such as Delrin, Celcon and others, this adhesive system is ideal for attaching and repairing the handrails and other fine details on many of todays cars and locos. MicroBond has sheer strength and stands up to expansion and contraction of different materials, so it can be used on rubber, assorted ABS and styrene plastics, brass, steel, resins, leather, wood and more (not intended for foam surfaces). Bonds in one minute, cures in five. When using with engineering plastics, treat the bonding surface with MicroPrep (sold separately) before gluing.
When working with difficult to bond surfaces, such as those made of Delrin, Celcon and other engineering plastics, apply MicroPrep first. Simply apply with brush or use the spray action nozzle and allow to evaporate before gluing with MicroBond (sold separately) or painting with your favorite paint (enamels tend to adhere better after longer evaporation).
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0056
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO USRA Single-Sheathed Boxcar: C&O
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Logging Caboose - Kit
Highly detailed logging caboose with die-cast metal truck, ribbed back wheels. Comes with couplers.
HO 66ft Bulkhead Flatcar - CNIS (Mineral Brown) #621008
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
PRR X31A Double-Door Boxcar: Shadow Keystone, Early - Single Car #69324
Detail Variations:
As operated between 1954 ad 1967.
6-pack includes the following numbers:
#69012
#69081
#69138
#69215
#69324
#69459
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
HO F89-F Bi-Level Auto Rack - Northern Pacific/BTTX #913604
Detailed Information
MODEL FEATURES:
Die-cast underframe
Authentic undulating safety railing
Accurate Whitehead and Kales Auto Rack
Early or late train lines and cut levers per prototype and era
Customer installed end bridge plates (included in box where applicable)
Detailed deck
Wire-formed brake plumbing
Separately applied hand brake per prototype
Separately applied wire grab irons where applicable
Prototypical ride height
70-Ton roller bearing trucks with animated rotating bearing caps installed
Trucks with animated rotating bearing caps
Minimum radius: 22inch - Recommended radius: 24+inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
Small Business Centre Center
Kit - 18-1/4 x 10-7/16 x 5-1/4 inches - 46.3 x 26.5 x 13.3cm as shown
A fixture of contemporary industrial parks, the Cornerstone Small Business Center is a perfect location for any HO Scale start-up company! Based on similar tip-up style structures seen all across North America, the kit includes a modern front facade with large office-style windows and entry doors, as well as a raised sidewalk, while the back wall provides easy access and a drive-in door for trucks
Part of the Cornerstone Modern Industrial Park series - read more here!
Great location for modern small businesses and light manufacturing operations
Contemporary facade with large office windows and double doors for front & side entrances
Raised walkway simplifies scenery construction for authentic higher front parking lot and lower truck dock on back wall as seen at many facilities
Four correct height truck dock doors with weather bellows/seals and inside loading door
Printed signs for a variety of businesses
Tip-up concrete panel construction fits layouts from the 1980s to the present
Build in multiple configurations or customize in minutes with molded cut lines, expand with additional kits or build bigger with add-on accessories available separately
Electrical box, roof vents and four roof-mounted air conditioners included
Modern square security lights - upgrade to working models with Modern Wall Light 3-Pack (949-4318, sold separately)
Molded in 5 colors and clear plastic
All Scale Track Cutter
Xuron track cutters are suitable for use with HO, N and Z Scale nickel silver rail. The track cutter provides clean, flat cuts to speed laying track.
3/32In Fluorescent Red Rod (8pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Red
HEIGHT IN INCHES
3/32In
HEIGHT IN MM
2.4mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
HO New Look Bus - Greyhound "Blue & Silver" - C Redwood City - Deluxe #1000
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
HO RTR Thrall 5-Unit Rebuilt 40Ft Well Car - Trailer-Train DTTX #748273 A-E
(yellow, Large Red Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft on both single and five-unit cars. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers - limited quantiuty, order now!
100- and 70-ton roller bearing trucks
Correct 36inch and 33inch RP-25 turned metal wheelsets
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
Proto MAX(TM) metal knuckle couplers
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
RTR 60Ft Gundreson Box Car - MTNR #175150
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
Tru Color Paint 107 - Acrylic -SP Daylight orange 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
4-40 Nylon Round Head Machine Screws (12pk) - 3/4 x .112 inch
Walthers Nylon Round Head Machine Screws are perfect for your models and for any other model or device that needs miniature insulating screws. Walthers hardware offers matching nuts, as well as washers, hex wrenches, taps and other miniature hardware and tools in standard small sizes. Nylon Round Head Machine Screws are part of the selection of Walthers miniature hardware and tools. Machine and wood screws may be brass or brass plated.
Amtrak Phase 3 (late) - set #4
Consist numbers- 156, 157, 179, 180, 181
Turboliner features:
Accurately designed using original blueprints and field measurements
Tinted windows, full interior details and flicker-free interior lighting
Separate factory installed grab irons
Full underbody details and highly-detailed trucks, including third-rail shoes
Both Power Cars come with smooth, reliable drive systems for optimal performance
Working headlights, marker lights and cab-mounted strobe lights
DCC models feature accurate sounds sourced and remastered from original videos
HO 53ft Reefer Container - Tiger Cool Express
A cool addition to contemporary HO intermodal operations, the Scenemaster 53ft Reefer Container will look great on rails or roads!
Features include:
- All-new model!
- Prototypes now in domestic service across North America hauling perishable food products
- Highly detailed refrigeration unit
- Realistic body details
- Colorful, contemporary paint and lettering schemes
- Perfect loads for WalthersProto or WalthersMainline well cars (sold separately)
- Instant detail for terminals, highways and industrial scenes
- Fully assembled, ready to use
HO Budd Slumbercoach - Burlington Northern #333 Loch Tay
All new from the ground up, the Rapido Slumbercoach features:
Designed from original blueprints
Full Rapido level of underbody detail including separate pipes and conduits
Full multi-color interior detail including roomette doors
Track-powered interior lighting (operable on both DC and DCC)
Accurate GSC 41-NDO-11 trucks with disc brake detail
Etched-metal end gates
Sprung diaphragms
Rapidos renowned stainless-steel finish
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Orange) #506705
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
HO EMD GP40R - DCC & Sound - Canadian National (Ex-IC) #3123
2012+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Woodland Scenics Realistic Tree Kit
(42) 2 1/2 in - 4in Pine Trees
The economical way to make trees in a variety of shapes, sizes, and colors
HO - Siemens ACS-64 - DCC & Sound - Amtrak #607
Features:
DCC sound-equipped ACS-64 includes a TCS WOWSound CD-Quality 16-bit 44,100Hz decoder with Audio Assist
Sounds package includes: horn, bell, cooling fan/power inverter, pantograph extension and retraction, coupler close/release, brake release and application, momentum, crew alert, grade crossing quill, departing and arriving station announcements, and more
Keep-Alive device for uninterrupted operation, even over dirty track and remappable light functions, die-cast frame, and selector switch for choice between rail and pantograph operation.
Performs best on 22inch radius curves or greater
HO Scale 1:87
Product Measurements: L 9.5 in., W 1.5 in., H 2 in.
Retail Package Measurements: L 12.5 in., W 2 in., H 3.5 in.
HO PC&F 5241 CUFT - Boxcar - BKTY (UP) - Single Car #153438
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Extension Cable, Plug - Socket, Length: 48 inches (5pk)
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
The Walthers Layout Control System Extension Cable features:
- Easily extend connections to Controllers or Power Distribution Block
- Pack of five cables, each 48 inches (1.2m) long
- Fully assembled with servo style connectors
Spray Can - Medium Gray (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
HO Code 83 Between-the-Rails Delayed-Action Magnetic Uncoupler (2)
(Track not included)
Place this handy delayed-action uncoupler anywhere on a straight track segment between-the-rails.
Ready to mount on top of ties with Code 83 rail.
Cut out ties if mounting Code 70, 55 or 40 rail.
Use the #334 Uncoupler Gluing Jig to aid in the precision installation in track.
Package Includes:
(2) each #322 Between-the-Rails Code 83 Delayed-Action Magnetic Uncoupler
Flexible Vinyl Stone Trim & Abutments - Medium
Use w/214-8267 & 214-8272, both sold separately.
Add realistic detail to HO structures with this set of Stone Trim and Abutments from Chooch Enterprises. Molded in flexible vinyl that is easy to cut with scissors or hobby knife, they can be finished with acrylic paints (sold separately) for added realism.
Scenic Accents(R) - Figurines - Track Workers (6/pkg)
HO Covered Hopper CIT Group
The Atlas Trainman Thrall 4750 Covered Hopper is based on 263,000lb GRL, 4,750 cubic-foot cars used since the 1970s for hauling grain and other bulk granular commodities. It features a detailed injection-molded body, interior weights, fine decoration, appropriate free-rolling trucks and magnetic knuckle couplers.
HO NSC Ballast Hopper - Canadian National (Maintenance Scheme) #302066
1976+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
G2 Dash 9-44CW - DCC Ready - Southern Pacific #8107
ETA: Late October 2022
Detailed Information
SP FEATURES:
1994 as-built appearance
Early (-dog leg-) stepwell gussets
Sinclair antennas
Nathan P3 horn
Large SP plow
SP NOTES:
The SP 8100s were some of the last mainline power delivered to the SP proper. The engines were used on all types of trains, in multiple with other class members of other SP 6-axle power. Many of them survive to this day, albeit repainted into Union Pacific colors.
DASH 9 SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
HO Hawker-Siddeley Van - Caboose - Canadian National - As-Delivered (Red/Orange Steps) - #79268
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
HO GP40-2 Diesel - DCC & Sound - Seaboard System #6615
SBD FEATURES:
- Ex-SCL and Ex-L&N
- Nose headlight
- 5-Chime horn
- Fire cracker antenna
- No plow
- All-new artwork provided by noted SBD railroad experts
ROAD NUMBER SPECIFIC FEATURES:
#1640
- Early phase
- Ex-SCL
- Chicken wire grilles
- 3200 Gal fuel tank
#6608
- Mid/Late Phase
- Ex-L&N
- Q-fans
- corrugated grilles
- 3800 Gal fuel tank
- exhaust silencer
- front anti-climber
#6615
- Mid/Late Phase
- Ex-L&N
- Q-fans
- corrugated grilles
- 3800 Gal fuel tank
- exhaust silencer
- front anti-climber
GP40-2 LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18 inches
SOUND-EQUPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
DC/DCC/Sound - Alco FB-2 Penn Central (ex-NH) #3393
FB-2 and FPB-2 models feature:
Operating back up lights. As appropriate.
Roadname specific details with or without dynamic brakes. As appropriate.
The only HO scale Alco/MLW B unit with accurate phase details including vertical or horizontal battery box louvers and etched metal Farr or mesh side grilles.
Canadian or American cast Type B trucks. As appropriate.
Full underbody piping and conduit.
Correct roadname and manufacturer specific FB-2 and FPB-2 fuel tanks.
New York Central features:
Phase 2 body with horizontal battery box louvers and Farr grilles.
Dynamic brakes
Alco welded fuel tank
GSC cast Type B trucks
EMD Electrical Air Filter Box
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
HO RTR PS 4740 Covered Hopper - CATX (3pkg)
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Body-mounted McHenry operating scale knuckle couplers
36inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Multi-packs feature unique road numbers
Weighted for optimum performance
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
HO 1988 G43B Coil Svc. Gondola w/ Coil Racks (Coils Not Included) - Conrail (CR) #601805
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -1988 G43B Coil Svc.- With Coil Racks ? Coils Not Included in the now-classic Conrail red paint. This series represents the former PC-painted G43B series. Conrail maintained the lettering locations that PC did, painting the Conrail reporting marks, road number, and Conrail can opener logo in the same locations PC had stenciled them. The G43B prototype features cushion draft gear, giving the model a distinctive look compared to the other G43 classes. The top chord of the car has a -COIL STEEL LOADING ONLY- stencil to remind customers and railroad officers that the car is equipped with coil racks. Our model has coil racks too, and we sell beautifully executed steel coils for this car separately. We recommend a load of four coils if you want to replicate most prototype loading patterns ? for the size of coil we created. Yes, we did the math. These Conrail coil service gondolas are offered in 12 road numbers and feature details appropriate for these 1969-built cars.
HO Scale Balcony Kit
HO GE ES44AC GEVO - ESU Sound & DCC - Canadian National #2884
(Web Site Scheme)
FEATURES:
One time run of these roadnumbers, order now - limited quantity available
The most popular prototype diesel in North America
Thousands in service from 2003 to the present
ESU Sound for DCC and DC layouts featuring:
- 4 function outputs with brightness control by CV
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch prime mover sounds
- Compressor
- Dynamic brake
- Multiple realistic lighting effects
21-pin DCC plug
2- or 4-vent dynamic brake vent as appropriate
Easily handles 18 inch radius curves (22 inch or larger recommended)
Six powered axles per unit
LED Lighting includes:
- Correct headlight position per prototype
- Working front ditch lights
Three truck styles to match prototypes:
- Standard high-adhesion
- Steerable (nonworking)
- C4 A1A center idler axle
Same powerful drive as WalthersProto(R) locos featuring:
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant and directional LED lights
Correct profile radiator grilles and rooftop walkway surface details
Molded drill starter points for grab irons - easily added with the GE ES44 Evolution Series Diesel Detail Kit (910-250, sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Fully assembled
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Delaware & Hudson - Lightning Stripe #5003
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO PC&F 5241 CUFT - Boxcar - Berlin Mills - Single Car #412
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Trenton Works 6348 CN Boxcar - Canadian National (w/ Conspicuity Stripes) #598078
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
HO GMD SD40-2 - DCC Ready - Canadian Pacific (Golden Beaver) #5617
Product Information
This Bowser Executive Line GMD SD40-2 is based on the huge fleet of diesels constructed by the General Motors Diesel Division plant in London, Ontario for several Canadian railroads, and a few US lines as well. This finely detailed model features GMDD and railroad-specific details, accurate decoration, operating headlight, can motor, brass flywheels, nickel-silver wheels with RP25 flanges and knuckle couplers.
Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound Select decoder. Analog (DC) version has 21 pin socket for DCC module.
Bowser does not recommend LOK sound locos for use on DC layouts.
Features LokSound Select decoder, GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, Flywheels, Can motor, RP25 flange, KD couplers
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
HO ACF 89Ft F89J Flatcar w/ Deck Risers - JTTX (2000s Yellow) #601492
HO EMD SW9 - DCC & Sound - Santa Fe (ATSF Bookend Scheme) #2435
Santa Fe:
Delivered in 1953
Unique stepped louvers on hood
-Trash can- style spark arrestors
Large cab sunshades on front and rear cab windows
Carbody handrails
Working Pyle 360 warning light
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO Canadian National - Grey Web Address Logo - Various Sizes - Decals
Circa: 2000+
Scale: HO Scale
Instruction Sheet: MC-5010
Description: Lettering Gray Canadian National / Web Address Logos - HO Scale
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
N Office & Warehouse (Scale: 30 x 60ft) - Blue
Product Information
This kit is designed with cut lines on the back side of the walls so that you can choose the height of the building. Walls are 24 scale feet high with cut lines to produce a 20,16,12, and 10 foot tall building. Side walls and end walls have door and window openings provided. Solid walls have cut lines for door and window openings (optional). Kit includes doors, windows and down spouts.
HO Hawker-Siddeley Van - Caboose - Canadian National - As-Delivered (Red/Orange Steps) - #79329
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
All Scale Learning Kit - Trees
Learn the ease of adding trees to any layout. The kit contains enough product to make 18 trees ranging in height from 3/4 inch to 8 inches.
Value-packed tools specifically developed to teach beginning modelers and other hobbyists how to use the Terrain and Landscape Systems. Learn to sculpt terrain, cast, color and install rocks, landscape various scenes, create paved areas, make trees, model water features and other scenic details. Reseal packages for easy storage.
Evergreen Scale Models 103 Opaque White Polystyrene Strips 14in .010x.060 (10pcs pkg)
Built-&-Ready Landmark Structures - Country Store Expansion
Assembled - 6-7/16 x 5-1/2 inches
(16.4 x 14cm)
The general store is expanding and construction is well underway on the new addition.
HO 60ft Flat Car - British Columbia Railway #1511
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO Conrail (CR) G41A Repaint 1976 w/o Hoods PRR Shops G41A Coil Car
CR G41A Repaint 1976 w/oHoods illustrates an early CR repaint. Check out the thinner style CR logos, PC/CR style data stencils, and era appropriate ACI and PC/CR style double COTS. The early CR cars maintained their hoods for protection of the coil shipments. If you want to model the car later in their service lives, do not panic: The hoods are removeable. The interior troughs have all of that loading and identification data, too. The ends feature the original shorter style coupler lift bar brackets and Morton style crossover platforms. The 125-Ton trucks feature rotating Timken caps, 38in wheels and accurate brake beams with truck mounted brake details.
Also, these cars look great loaded with our all-new coil loads sold separately!
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
N Scale ACF 4600 3-Bay Covered Hopper - AEX-Ex GTW #395
MODEL FEATURES:
- Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
- Round or trough hatches
- Photo-etched metal roofwalk
- Separately applied wire grab irons and stirrup steps
- Detailed outlets
- Multiple roadnumbers
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed
- Highly-detailed, injection molded body
- Separately applied brake wheel
- Screw mounted trucks
- 100-ton trucks with 36 inch machined metal wheels
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Minimum radius: 9-3/4 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO GP38-2 - DCC Ready - Southern Pacific #4864
Detailed Information
SP FEATURES:
Ex LN/SBD
Mid-Phase body
Blomberg M trucks
Firecracker antenna
Nathan P3 horn
HELM leasing pant scheme
3200 gallon fuel tank
Nose headlight
GP38-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO B-50-15 Boxcar - As Built w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #15245
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
Evergreen Scale Models - Opaque White Polystyrene H-Column .125In x 14In (3 pcs pkg)
HO Enterprise 2-Bay Covered Hopper - MSGX (Flo-Sweet) #280
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15354
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21108
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- 1946 Whitehead & Kales Car Carrier Resin Cast Kit
HO EMD GP35 - Paragon4 Sound/DC/DCC - CB&Q #992
(Chinese Red)
Ubiquitous on American railroads, the EMD GP35 is a 4-axle diesel-electric locomotive built by EMD and subsequently General Motors Diesel in the mid 1960s. Over 1300 of these locomotives were produced, and they were operated by virtually every major railroad in the United States. Additionally 26 units were built for Canadian railroads and another 57 units were built for Mexican railroads. These freight locomotives were powered by EMD 567D3A 16-cylinder engines that generated 2500 horsepower.
List of individually controllable lights in our EMD GP35 models:
- Headlight
- Rear Light
- Mars Light (SP only)
- Numberboard Lights (Front & Rear)
- Front Classification Lights
- Rear Classification Lights
- Emergency Light (SP only)
- Rotary Beacon (where appropriate)
- Ditch Lights (where appropriate)
- Cab Light
Road-specific detail options that are prototypically accurate for each road name:
- Truck sideframes
- Dynamic brake hatch
- Open & closed type fans
- Short hood detail arrangement
- Long hood end detail arrangement
- High short hood option where accurate
- Horn type and location
- Bell location
- Multiple front pilot types
- Multiple rear pilot types
- Accurate cut lever types
- MU receptacle arrangement
- Multiple sunshade options
- Antenna type and location
- Wind deflector type
- Rooftop AC for ATSF type
- Rotary beacon type and location
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up
- ABS Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, Wipers, and Etched Metal Grills
- Prototypical Light Operation - accurate for each paint scheme
- Prototypically Accurate Sounds for the EMD GP35 Diesel Locomotive
- Metal Kadee-compatible Couplers (2)
- Will Operate on Code 70, Code 83, and Code 100 Rail
- Minimum Operating Radius: 18 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
HO Christmas Figures (6pkg)
Bring new life to your layout with ready-to-use Walthers SceneMaster figure sets!
Each figure is carefully sculpted with realistic detail and hand-painted.
HO USRA Single-Sheathed Boxcar: C&O
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
RTR 60Ft Gunderson DD HC Box, BNSF/Wedge #761217
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO MLW M420 B/B Set - DC/DCC Ready - BC Rail (Red/White/Blue - B Unit Hockey Stick) #RCL683, #RCL685
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
The Rapido HO Scale F7B and F9B feature:
Designed from original GMD blueprints and field measurements
The only 100% accurate GMD-built F7B and F9B locomotives – This is not a stand-in
Road-number and era-specific details applied at the factory
Steam generator or no steam generator panel as appropriate
Correct bodyside grilles as appropriate
Correct end details including unique CN steam generator end louvers
Backup light in correct location for CN or CP
Unmatched underbody details including air piping
Operational backup light (DCC)
Drive system designed for silky-smooth slow-speed operation
Metal Macdonald-Cartier Knuckle Couplers
DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings
Several road numbers per paint scheme
HO Trenton Works 6348 CN Boxcar - Canadian National (w/ Conspicuity Stripes) #598152
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
HO 85ft General American G85 Flatcar - Union Pacific #53030
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - Denver & Rio Grande Western(TM) Rack /Trailer-Train Flatcar TTKX #802631
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO 60ft Hi-Cube Plate F Boxcar - TTX/TOBX
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline(R) 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
GMD SD40-2f - DCC and Sound - CP Rail (Round Porthole, White Stripe) #9005
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
HO 40Ft Hi-Cube Dry Containers - Ocean Network Express (ONE White) (3pk)
3 pack road numbers include : ONEU 002297/002880/003157
Body: Type A
Door: Type B
Latch: Type D
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
Forest Blend
Models low-to-medium ground cover, such as bushes, trees and shrubs, and to make small to medium trees. Available in six colorfast colors that blend with other foliage. Use for any scale. Attach to Tree Armatures with Hob-e-Tac.Attach to layout with Scenic Glue. Purchase the Scenery Manual for additional information about how to use the Landscape System.
Particle size is approximately 1/8inch - 5/16inch (3mm - 7.9mm)
Spray Can - Pearl Clear (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 60ft Gunderson Boxcar - TBOX/Forward Thinking #663640
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Fully assembled and ready-to-run
- Razor sharp painting and printing
- Weighted for optimum performance
- 36 inch metal wheels with RP25 contours
- Minimum radius: 18 inches
Golden Taklon Detail Brush Set (4pcs)
Round Taklon Brushes with synthetic filament.
Includes 4 Round Brushes, sizes: 1 each of 2/0, 0, 1, 2
- Can be used in all kinds of paints: water, oil, enamels, varnish, lacquer, bronzes, etc.
Cleaning:
After using in water colors, simply clean with soap and warm water and shape to a point. If used in paints other than water colour, clean brush with thinner and wash out thinner with warm water and soap and shape. Allow brush to dry thoroughly before reusing in anything except water color.
RTR 60Ft Gundreson Box Car - MTNR #175174
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO Magic Pan Commercial Bakery - Kit
FEATURES:
- Great for 1960s and later HO layouts
- Arrange structures to fit available space
- Realistic bulk storage silos with realistic piping
- Truck dock doors with weather diaphragms
- Realistic office entrance
- Decal signs
- Molded in appropriate colors
DIMENSIONS:
16 x 8 x 3-1/2 inches
HO 40Ft Fruehauf Exterior-Post Volume Van - Lehigh Valley #200021
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
HO GP18 - DCC & Sound - Conrail #7499
Detailed Information
CR FEATURES:
Ex LV #305, faded paint effect with CR patched markings
Lehigh Valley was folded into the U.S. governments bailout of Penn Central and became a founding member of Conrail in 1976. The collection of four GP18s went on from Lehigh Valley to serve Conrail as its 7496-7499. The units initially wore patched out Lehigh Valley dress with -CR- markings and all eventually saw repainting into Conrail blue.
GP18 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Accurately-painted and printed paint schemes
Body-mounted McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Evans X72A Box car: Conrail w/ Small Logo - Single Car #229493
Detail Variations:
As operated between 1976 to the 1990s.
6-pack includes the following numbers:
#229023
#229199
#229328
#229377
#229493
#229844
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
N Scale 3230 Covered Hopper - Trinity Industries Leasing (TILX) #30125
Features:
- All new tooling
- Ready to run
- Injection molded plastic
- Fine scale detail
- Etched metal roofwalks
- Crisp painting and printing
- Magnetic couplers
- Metal wheelsets
The Trinity 3230 Pressure Differential (PD) covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
HO BiLevel Commuter Car - UTA FrontRunner - Set #2
Salt Lake City
Includes: Cab: 109 Coaches: 201, 208 (Series 4)
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
WalthersMainline HO EMD SD70ACe-DCC ready Canadian National
Bring the power of todays railroading to your HO Scale layout with the WalthersMainline EMD SD70ACe diesels. Starting with the SD70 introduced in 1992, the prototype underwent a number of upgrades and in 2005 the more powerful SD70ACe was unveiled with AC traction motors. Today, these colorful locos can be found on the rosters of lines big and small. Nicely detailed and affordably priced, additional features include:
Limited edition - one time run of these road numbers!
One of the backbones of contemporary loco fleets
Prototypes in service 2005 to the present
Easily handles 18in radius curves (22in or larger recommended)
LED Lighting includes:
High or low headlight per prototype
Working front ditch lights
Constant and directional lights
Fully assembled
21-Pin DCC plug
Same powerful drive as WalthersProto(R) locos featuring:
5-pole skew-wound motor
14:1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Dual machined brass flywheels
Heavy die cast metal chassis
Molded drill starter points for grab irons - easily added with SD70ACe Diesel Detail Kit (910-251, sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Make your WalthersMainline SD70ACe more realistic with these accessories, available separately:
SD70ACe Detail Kit
Walthers Double Ended Pin Vise
Walthers Drill Bits
HO RTR 68Ft Railgon Gondola - Railgon GNTX #290058
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO - 89ft Thrall Bi-Level Auto Carrier - Ready To Run -CSX
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6inch (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
Factory-installed grab irons
Separately-applied ladders and brake equipment
Ultra-smooth rolling metal axles with 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24inch radius is recommended for operation.
In celebration of the 50th anniversary of Bay Area Rapid Transit (BART) in 2022, Rapido Trains is very pleased to be bringing you the BART Legacy Fleet in HO Scale! Produced in close collaboration with the Bay Area Rapid Transit, this represents Rapidos first foray into the rail-based rapid transit market!
Since its opening in 1972, Bay Area Rapid Transit trains have moved commuters and riders around the San Francisco Bay Area using these iconic cars. These pioneering cars were designed specifically to reduce association with aging transit equipment used in other cities. Instead of using traditional railcar manufacturers, BART signed a contract with Rohr Industries to create their first transit vehicles and contracted industrial design firm Sundberg Ferar to develop the trains futuristic look. Besides being recognized for its status as a ground-breaking achievements of civil engineering, BART is also known for its roster of very distinctive rolling stock. The original cab and center cars (A Cars and B cars) built by Rohr Industries between 1968 and 1975 were mechanically identical, with the exception of the cab overhanging one end of the A cars. Despite being the face of the system, the streamlined fiberglass cab became an operational issue as they limited
flexibility in building trainsets. To resolve this, the first of the C Cars were delivered in 1987 by Alsthom, featuring a more traditional flat cab, allowing them to be used both on the ends as well as in the middle of the consist. Additional C Cars were built by Morrison- Knudsen between 1994 and 1996. BART has run these trains for 50 years, with the external appearance largely unchanged since the initial concepts toured around the Bay.
With BART structures paralleling the Santa Fe, Southern Pacific, and Western Pacifics Bay Area lines, these have continually served as a sharp contrast to the often grimy freight service through the area, with sleek aluminum cars flying past freight drags and commuter service on elevated viaducts paralleling the railroad right-of-way
Each Rapido BART Car features:
- Designed from original blueprints, design drawings and field measurements.
- Track-powered flicker-free interior lighting compatible with DC and DCC layouts.
- Directional lighting, including headlights and red tail lights.
- NEM-style close-coupling system, so your cars always remain as close as possible through any trackwork.
- Minimum 18in radius (22in radius preferred).
- Full, multi-color interior detailing.
- Low-profile drive system in A and C cars allowing for a complete interior with no visible motor.
- Full underbody detail including separate electrical lines, conduit and equipment boxes.
- Highly-detailed, non-operating couplers on A and C cars.
- DCC-equipped models feature accurate sound recordings
HO NSC 3650 cf 66Ft Railgon - GNTX #295608
Aurora Miniatures North America Inc. is proud to offer the National Steel Car 3650 cf 66ft Railgon Gondola in HO scale. These Canadian-built modern 66? gondolas were introduced in 2012, they were assigned the GNTX reporting mark and painted in the prominent Railgon scheme with a large Tuscan red TTX logo on a yellow background. They can be found across North America in steel mill service. Similar-looking gondolas were also built for BNSF, Canadian Pacific and other owners. We are offering 20 unique GNTX numbers along with a ?Data Only? version for the first production run.
HO 16,000-Gallon Clay Slurry Tank - GATX #29150
MODEL FEATURES:
- Separately applied fittings nozzle, manway, and small safety valve nozzle
- See-through Photo-etched metal walkways and end platforms
- Full brake plumbing and rigging including brake wheel, air reservoir cylinder, triple valve, brake linkage, trainline, brake rod, large brake
- Printed marking on the sides, ends, and top of the tank body
- Fine scale side ladders
- Placard holders
- Printed marking on the sides, ends, and top of the tank body
- Equipped with McHenry AAR upper/lower shelf couplers
- 36 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Multi-packs feature unique road numbers
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Kaolin, a fine white clay, is produced by the natural chemical weathering of aluminum silicate minerals such as feldspar. Mined in the southeast United States (primarily Georgia and Florida), kaolin is used in the manufacture of ceramics, bricks, light bulbs, cosmetics, medicines and food additives. The largest use is in the manufacturing of paper, especially in creating glossy paper. Kaolin is shipped both as a dry powder in covered hoppers and in tank cars with water as a slurry. In the slurry form the weight of water requires the tank cars be smaller capacity compared to other liquids such as ethanol and LPG. Identical tank cars are also used to haul calcium carbonate slurry, used in the making of lime and cement.
One of the more modern versions of the 16K Gallon Tank car is designed and manufactured by UTLX Manufacturing Inc (formerly Union Tank Car). The car is a 286K (referring to a 286,000 pound gross rail load limit) design with a capacity of approximately 16,000 gallons. The capacity varies slightly between UTLX and Englehard, the operators of the cars. The car is an AAR Plate C clearance car with a 111-inch I.D. tank and an overall length of 44 feet. For a complete bottom unloading the car incorporates a Funnel-Flow design. The cars are lined and kept in dedicated service to avoid cross-contamination.
HO FMC 4700 Covered Hopper - UNPX #121061
MODEL FEATURES:
- Separately-applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, -brake cylinder and triple valve
- 100-ton trucks with 36 inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
- Factory applied roof walk, roof hatch, end details, ladders, and wire grab irons
- Two outlet grate variations
- Accurately painted and printed on a highly detailed, injection molded body
- See-through etched metal end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- All 3-packs feature unique road numbers
- Minimum radius: 18 inches
HO Overhead Traveling Crane - Kit
Product Information
The Walthers Cornerstone HO Scale Overhead Traveling Crane is great for detailing many industrial structures or as a stand-alone structure in a scrapyard or metal handling facility. Traveling cranes like this one move metal materials from outdoor staging areas to waiting freight cars or trucks. This detailed kit features a covered motor housing that can be positioned, an operators cab, a non-working electromagnet and overhead supports. A great addition at all kinds of heavy industries, use the Overhead Traveling Crane in steel mills, scrapyards, foundries, railroad yards and wherever heavy lifting is needed on your railroad. Use the Overhead Traveling Crane to add realism to Cornerstone HO Scale industrial buildings.
Great detail for industries
Covered motor housing
Craneway and vertical supports
Easy-to-build plastic kit
As shown the Overhead Traveling Crane measures: 12-3/16 x 8-5/8inch (31 x 21.9cm)
G (1:24) ABS 2Ft-6In STAIR (1pc)
Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision injection molded in Gray ABS Plastic. Ideal for all outdoor or profess model construction where model life is critical.
SCALE
G
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
17/32In
HEIGHT IN MM
13.5mm
WIDTH IN INCHES
1-7/16In
WIDTH IN MM
36.5mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
1/2In
LENGTH IN MM
300mm
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) #653036
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Round Hay Bale - 20 pcs.
Bring rural areas to life in minutes with this set of 20 Round Hay Bales! Fully assembled and ready to add to scenes new or old, each features a realistic color and texture. Perfect for detailing fields and farm scenes, they also make great loads for boxcars, and flatbed wagons or trucks.
HO Dash 8-40CM - DCC & Sound - BC Rail: Red/White/Blue #4617
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
HO Gunderson 6276 50Ft Plate F Boxcar - TTX (2016) #506894
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
Smokebox Graphics HO FRA 224 Strips (Yellow)
Enough for 40 Cars.
Reflective, self-adhesive, and easy to apply. Precut to common sizes in an ordinary yellow color. Applies to your model in minutes! Includes 400/each 4 In x18 In, 120/each 4 In x36 In, and 100/each 8 In x18 In strips - enough for (40) 60-foot freight cars.
Ready to Run - Jordan Spreader - Delaware & Hudson #35054
Now you can add one of the most versatile machines every built to your maintenance-of-way fleet with the WalthersProto Jordan Spreader! Used to profile and grade drainage ditches during warmer weather, when the flakes start flying, Jordans can be found plowing snow and pushing it back from the tracks. These HO replicas are based on the model 2-200 Spreader-Ditcher-Snowplow used by dozens of railroads, which have been in service year round since the 1920s. Featuring all-new tooling, the models are a perfect companion to the WalthersProto Russell Snowplows (sold separately) and feature:
Limited edition - one-time run of these numbers
Factory-installed grab irons
Positionable wings and moldboards can be raised and lowered
Built tough with durable metal hinges and other details
Complete underbody with brake gear and piping
Thin profile stirrups
Cab window glass
Railroad-specific details
Horizontal or vertical air reservoir
Original or one of 3 later headlight styles as appropriate
70-ton roller bearing or Bettendorf trucks as appropriate
Single-chime air horn placement
Ultra-smooth rolling metal axles and 33in wheelsets
Proto MAX(TM) metal knuckle couplers
Tangent Scale Models HO Greenville 86ft Boxcar CSX
CSX -Repaint 1991+ leads off this release, offering examples of repaints from B&Os first order of cars in 1969. Applying CSX paint to a Tangent replica is not a walk in the park ? It is all about the big AND little details. This car features the large CSX logo on the center of the sides and accurate Ease up! stickers on the corners. Apparently, the more the better, since CSX also applied tiny Ease up! stickers on each door. Yes, we have faithfully reproduced this extraordinarily small detail. Get out your magnifying glass if you want to read the CSX Quality Check oval sticker applied above the COTS by Grand Rapids employees. This Greenville car features Morton style crossover platforms, an Ajax hand brake housing, accurate End-of-Car Cushioning details with truck mounted brake hardware, and 70-Ton Barber S-2 Trucks with 33in wheels and accurate Timken roller bearing caps. Check out the CSX-specific modern features in this release, including the large tack board mounting location on the door and the single and double third arms on the top door tracks. We are now offering CSX in six different numbers!
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
HO EMD SW1200 - DCC Ready - Soo Line #324
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- Next18 plug for easy DCC conversion at any time (decoder sold separately)
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
Southern Pacific 4-8-2 MT-4 DCC and Sound
The SP began building their MT-4 class 4-8-2 Mountains in their Sacramento Shops in 1926. As-delivered they came with green boilers, which lasted until the early to mid-1930s. They were then painted the standard black scheme.
PROTOTYPE SPECIFIC INFORMATION
The first North American 4-8-2 locomotives were built by the American Locomotive Company (ALCO) for the Chesapeake and Ohio Railway (C&O) in 1911, for heavy mountain service (hence the popular name, (Mountain Type). Southern Pacific joined the parade in October 1923, when it took delivery of ten new 4-8-2 locomotives, class Mt-1, from Alco. They were numbered in the new 4300 series as #4300-4309 and were put to work on the Sunset and Golden State routes. They were an instant hit; SP promptly signed with Alco for eighteen more (#4310-4327) for delivery in March 1924.
Meanwhile, the art of locomotive manufacturing was evolving as specialized steel manufacturers learned how to create ever-larger and more complex steel castings. SP took note of these developments and performed cost studies to evaluate the possibility of building 4-8-2s in the shops at Sacramento. The numbers were all favorable and a project was approved to build eighteen class Mt-3 4-8-2s (#4328-4345) in-house. Sacramento began work, with #4328 approved for service in September 1925. The last Mt-3, #4345, entered service on June 16, 1926.
Business continued to boom and trains kept growing—the SP’s Board of Directors approved a new program to build another 21 similar machines, #4346-4366. These locomotives would be class Mt-4.
Many of the Mt-4s assigned to operating districts with snowsheds were fitted with SPs distinctive clamshell exhaust deflector. Their most important visual modification took place beginning in 1939, when they were fitted with sheet-steel skyline casings, similar to those on the new Lima 4-8-4s, that were developed to help direct exhaust smoke atop the boiler, away from the locomotive cab.
Still another visual treat was available for five short years, when #4350, 4352, 4353, 4361 and 4363 were partially repainted in Daylight red and orange for service on the San Joaquin Daylight. The tenders were completely painted, but only the cab area received vivid colors. The new paint was applied in 1946, approximately the same time that tender lettering standards were changed from Southern Pacific Lines to Southern Pacific. After 1951, all five engines were repainted in black and re-entered normal pool service.
As the 1950s progressed, new diesels were taking over more freight and through passenger assignments, leaving SP with a surplus of relatively modern steam power. A few Mt-4s were still operating into the fall of 1956. The final day for steam on Commutes was January 22, 1957, but SP clerks did not get around to preparing formal retirement papers for the last five Mt-4s until after diesels had completely taken over.
ROAD NUMBER SPECIFIC FEATURES:
#4357
Skyline casing
Standard black paint scheme
Corrugated Pressed Steel pilot
Laird Multiple Bearing Crosshead, 160-C-1 /C-2 Semi Vanderbilt tender
#4353
Skyline casing
Daylight paint
Bopox style wheel center on main driver
Boiler Tube style pilot
Alligator style crosshead, 160-C-1 /C-2 Semi-Vanderbilt tender
#4363
Skyline casing
Daylight paint scheme
Corrugated Pressed Steel pilot
Laird Multiple Bearing Crosshead, 160-C-1 /C-2 Semi Vanderbilt tender
STEAM LOCOMOTIVE FEATURES:
-With or without Skyline casing
-Metal handrails
-Builders plates
-Cab interior details
-Non-operating classification lights
-Blackened metal wheels
-Adjustable cab windows and doors
-Lighted number boards
-Firebox with rivet detail
-Adjustable Cab hatch
-Laird multiple bearing cross head, where applicable
-Factory applied detail parts, including:
-brass-painted bell and whistle piping
-valves generator
-steps air pump
-air tanks reverser
-coupler lift bar
-Front coupler pocket able to accept an operating coupler
-See-through running boards with safety tread detail
-Boiler backhead with full details and printed gauges
-McHenry operating scale knuckle couplers
-Minimum radius: 22in
Era: 1926 - 1958
NEW FEATURES:
Dual cube speakers for great sound quality
Upgraded headlight lighting with LED
Improved loco-to-tender connection harness for increased durability and serviceability
Improved electrical pick up wipers
Improved traction tire-to-rail contact area
SOUND EQUPPED MODELS ALSO FEATURE
Tender-mounted DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Chuff, whistle and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Aluminum Flat Sheet - 0.064inch x 4inch x 10inch
1 piece
Length: 10inch
Width: 4inch
Thickness:0.064inch
SwitchPilot Extension - The better half!
If required, SwitchPilot can be augmented with the SwitchPilot Extension Module. Plugged in at the side of the SwitchPilot, it offers four relay-driven outputs, used for switching potential-free loads, or for polarizing the frog. The ideal supplement for tricky circuitry!
MODES OF OPERATION:
The SwitchPilot Extension Module only works in conjunction with a SwitchPilot. Plugged in at the side, it gets its electrical power directly from the SwitchPilot. It contains a total of 4 Twin-Relays (2 x DPDT), of which each is dedicated to a pair of transistorized SwitchPilot outputs.
The respective relays switch position is directly dependent upon the state of this pair of outputs. With the relays help, loads can be switched, galvanically separated from the rest of the track (it functions like a k84), or a motorized turnout can be polarized.
With the relays 1.5 Amp continuous rating, either frogs can be polarized, or blocks powered signal dependent, or motorized devices, such as (water) pumps may be switched. Especially intricate is the option to control motorized turnouts. Of course the SwitchPilot Extension Module easily handles the necessary motor polarization as well.
Tear & Plant Meadow Mat - Winter Meadow
DIMENSIONS:
8-5/8 x 7-7/8 inches (21.9 x 20cm)
FEATURES:
- Can be used for HO, N, O or larger scales
- A realistic grass meadow in minutes!
- Easily cut or torn into smaller pieces or to fit you available space
- Great for adding long grass to medium and large areas
- Flexible for easy use on uneven terrain
- Ready to use
- Varied colors and flocking for added realism
- Includes 10 individual grass tufts too!
- Flexible transparent base blends into existing scenery
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14087
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO MIL 3800 Covered Hopper - CP (Delivery Scheme) #382521
They are back, again! The famous Rapido 3800 cu.ft. Cylindrical Hoppers make a triumphant ~THIRD~ return with new road numbers and paint schemes!
FEATURES INCLUDE:
- Round-hatch or Trough-hatch design
- Correct Dofasco S-2 100-ton trucks
- Two body variations with 6- or 11-side panels
- Three brake equipment variations and optional additional air reservoir on NSC cars (if applicable)
- Etched running boards and brake crossover platform
- Factory-installed air pipes and coupler cut levers
- Finely molded plastic walkway supports and end cages
- Full separate air piping and brake equipment details
Sylvan Scale Models HO DP-0062 Etched Brass CPR Caboose Steps/Ladder
HO RTR 50Ft ACF Exterior Post Boxcar - Railbox #30362
Product Information
Serve shippers on your HO railroad with these WalthersMainline 50Ft ACF Exterior-Post Boxcars. Responding to a growing shortage of serviceable cars, ACF and other builders unveiled a new generation of bigger equipment in the 1970s with increased width and height to improve carrying capacity. Today, theyre still in service for Railbox and many other roads, where they can be found moving all types of cargo. Features of these models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes seen from coast-to-coast 1974 to the present
Handles all types of general freight loading
Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
41Ft 3inch Truck Centers
15Ft 2inch Tall
10Ft 8inch Wide
Fully assembled
Correct 33inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO RTR PS-2 2600 Covered Hopper - Norfolk & Western (NW) #170737
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
Railroad Tug Boat Kit - Unpainted and Resin Cast
(1/87 Scale)
This kit is perfect for any harbor or river scene. With its high pilot house, this tug typifies a railroad tug boat used for moving railroad car flats and barges. The higher pilot house allows the captain to see over a railway car float loaded with box car. With the closing of most car float operations, many of these tugs may now be seen in regular tug boat service. Kit includes etched brass stanchions. Tug measures 11in X 3.25in.
-Cast Polyurethane Resin Kit
-Easy Assembly
-Details Moulded in Place
-Accurate
-Less Trucks and Couplers
Try Sylvans Resin Prep! Helps prepare your model for painting!
Part #SSM-A001
HO GMD SD40-2 - DCC & Sound - QNSL (Grey) #261
Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound Select decoder. Analog (DC) version has 21 pin socket for DCC module.
Bowser does not recommend LOK sound locos for use on DC layouts.
Features LokSound Select decoder, GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, Flywheels, Can motor, RP25 flange, KD couplers
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #1159
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
40Ft Corrugated Container -Container Association 2pk
578776(7) and 579852(4)
HO Alco RS-3 - DCC & Sound - Maine Central - as delivered - #556
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. DCC/Sound version features LokSound V5 decoder.
HO Slab-Side Covered Hopper (8 Hatch) - Canadian National (CN Noodle) #353641
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
HO 53ft Jindo Container - HUB Group/Norfolk Southern Set #8 (3pk)
(#633727, 633814, 633904) (GREEN/WHITE/RED)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting
Foliage Clusters - Dark Green (50.8 in3)
Model bushes, hedges, shrubs, trees, and other high ground cover, and use on hillsides to model tree masses.
Tru Color Paint - Acrylic - Flat Weathered Iron Oxide Rust - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
DC-21 Pin Motherboard for LEDs
N Scale NSC 73Ft Centerbeam Flatcar - Trailer Train (TTZX) #861276
The N Scale NSC 73Ft Centerbeam Flatcar features:
Two top truss configurations; early Z pattern and standard closed pattern with tie-down brackets
Two deck configurations; early with risers and mid without riser
Two underbody configurations
Multiple brake stand options
Multiple truck types
Fully detailed underbodies with brake piping and rigging
Free rolling, metal wheelsets
Multiple end cage variants
HO Hawker-Siddeley Van - Caboose - Canadian National - Late - (Black Steps) - #79223
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
HO Highway Tractor Stripes & Flames - Decals
Circa: 1950-80
Scale: HO Scale
Equipment Type: Striping - Flames
Description: Highway Tractor Stripes & Flames - Waterslide Decal - HO Scale
Water Kit
Kit includes materials needed to model 28 square inches (180 sq cm) of streams, rivers, lakes or other water features
Single Type G - Double Head
HO 40Ft PS-1 Boxcar - Norfolk & Western (Black Repaint) #42055
Date: NK 9-73
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
Walthers SceneMaster 11671 International(R) 7600 Tank Truck with Trailer Oil Co Decals
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Chesapeake & Ohio C&O #5187
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Scale SD30C-ECO - DC/DCC Ready - Canadian Pacific #5041
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
HO H21A 4-Bay Hopper - Pennsylvania (PRR Black, Plain Keystone) #695513
1961+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO EMD SD70ACe - ESU(R) Sound & DCC - BNSF Railway #9374
(H3; orange, black, yellow; High Headlight)
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Thousands in service from 2005 to the present
- Fully assembled
- 21-pin DCC plug
- Easily handles 18 inch radius curves (22 inch or larger recommended)
- Six powered axles per unit
- Molded drill starter points for grab irons - easily added with the EMD Diesel Detail Kit (910-251, sold separately)
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
Equipped with ESU Sound for DCC and DC layouts featuring:
- 4 function outputs with brightness control by CV
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch prime mover sounds
- Compressor
- Dynamic brake
- Multiple realistic LED lighting effects
-High or low headlights per prototype
- Working front ditch lights
- Constant and directional lights
Same powerful drive as WalthersProto(R) locos featuring:
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant and directional LED lights
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
HO 40Ft Wood Reefer - Canadian National #207027
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch
PRR X31A Double-Door Boxcar: Shadow Keystone, Early - Single Car #69138
Detail Variations:
As operated between 1954 ad 1967.
6-pack includes the following numbers:
#69012
#69081
#69138
#69215
#69324
#69459
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
5/32In Fluorescent Yellow Rod (5pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Yellow
HEIGHT IN INCHES
5/32In
HEIGHT IN MM
4.0mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
HO Galvanized Culvert Pipe - 48 Inches (3pk)
Specifications
Scale: HO (1:87)
Sizes: 0.55 inch
Length: 3.4 inches
Galvanized steel culvert pipes have been around for over a century and serve many purposes from storm sewers to drain pipe and even irrigation. Found where roads or railroads cross low lying areas, streams, or other waterways, these galvanized pipes provide a pathway for water to flow while reducing erosion at these critical crossings.
Suitable for any era, these galvanized culvert pipes will look right at home on your layout. Each HO-scale pipe section is 25 scale feet long and comes in a variety of diameters, suitable for many different applications. Hollow throughout, each pipe features realistic corrugations both inside and out.
HO Lightweight Coach -VIA Rail Canada #5611
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO EMD MP15AC Diesel - DCC & Sound - SOO Line #1539
SOO FEATURES:
Ground lights
Cab beacon (effect in DCC)
Leslie 3-chime cab-mounted horn
Small fuel tank
Ratchet brake
After the 1985 acquisition of the MILW from bankruptcy, SOO inherited their MP15ACs along with other motive power. While many were simply patched and put back into service, a few got the full white and red SOO repaint treatment. Even though we have offered these numbers in the past, we thought it was time to announce these again, this time with LEDs and Tsunami 2 Sound!
MP15AC LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Lift rings
Windshield wipers
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Operating ditch lights (if equipped)
Operating ground lights
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and -printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO H-6-G - DC/Silent - Painted/ Unlettered - Wood Cab
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
RTR 30RTR 30,000 Gallon Ethanol Tank Car - MWTX (3 pack)
Detailed Information
112704, 112718, 112726
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
HO 65Ft Through Plate Girder Bridge - Code 100 Nickel Silver Rail
Product Information
The Atlas HO Scale Code 100 65Ft Through Plate-Girder Bridge is based on a commonly used bridge used across North America. The bridge is supplied with Code 100 nickel silver rail on its deck surface and is compatible with all Code 100 track. For track planning purposes it is 9inch(22.9cm) long - the same size as a standard piece of straight Snap Track(R).
HO ET44 Tier 4 - DCC & Sound - CN/100th Anniversary #3221
Road number 3108 Has a black cab roof; does not have the circle graphic on the nose
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO UAC TurboTrain (DC/DCC/Sound): VIA #2 - 5 Car Set
#149-204-259-229-154
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model.
HO MP15AC - DCC & Sound - Lake State Railway #1501
Detailed Information
LSRC FEATURES:
MU hose holders on each end
Operating front and rear ditch lights
Air filter box, horn, decal placement, and antenna style per road number
Lake State Railway began operations in 1992. LSRC operates on former D&M lines in the lower peninsula region of Michigan. Commodities carried include aggregates, coal, and grain. In 2016, LSRC acquired two MP15AC locomotives from Union Pacific. 1501 is a former MKT unit, and 1502 was formerly owned by MILW.
LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Windshield wipers
Lift rings
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
NEW FEATURES:
Operating ditch lights (if equipped)
Operating ground lights
Newly designed motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Excellent low-speed operation
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Extra Fine Extender Tip (6pcs)
For use over the standard top, it allows BSI thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a time.
Thin CA tends to run everywhere, so these allow precise application.
HO Speed Recorder for Late Era Locomotives (1pair)
Garden Fence -- Kit - 48-7/8 inches - 124.2cm Total Length - Brown color
Bring your HO backyard garden and other scenes to life with the Garden Fence kit from SceneMaster. All parts in this easy-to-use plastic kit feature realistic wood grain texture, and can easily be painted or weathered to suit. The kit is complete with gates and various lengths of straight fencing, which are easily cut for customizing, or build a bigger fence by combining kits, each sold separately.
SubTerrain-System-Foam-Accessories-Road-System-Smooth-It 1 qt size
Smooth-It is a plaster material that is used to smooth rough spots, create streets, roads and parking lots. Mix with water and apply directly to any clean hard surface. Covers 26Ft by 3inch by 1/4inch (HO Scale - two-lane highway).
HO 53ft Reefer Container - Cool Train
A cool addition to contemporary HO intermodal operations, the Scenemaster 53ft Reefer Container will look great on rails or roads!
Features include:
- All-new model!
- Prototypes now in domestic service across North America hauling perishable food products
- Highly detailed refrigeration unit
- Realistic body details
- Colorful, contemporary paint and lettering schemes
- Perfect loads for WalthersProto or WalthersMainline well cars (sold separately)
- Instant detail for terminals, highways and industrial scenes
- Fully assembled, ready to use
Square Mega Bass Speaker - 28mm
This is our largest mega bass speaker which provides the best low frequency bass sounds for your steam, diesel, and electric models.
Dimensions: 28 x 28 x 11.2mm(D)
Frequency Response: 310Hz - 20kHz
Peak Power: 2 Watts (Nominal) 4 Watts (Peak)
Impedance: 8 Ohms
High Performance Motor - DCC Compatible - 1 per pack
HO GP40 - Gold DCC & Sound - CSX (Bright Future) #6641
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
40 Ft Modernized Box - NSRC #420
Era:1970s+
MODEL FEATURES:
Fully assembled and ready for your layout
Underbody with brake system details
Many of these schemes were frequently in lumber service. On the prototype, it was common to find these in strings of 4 or more within a lumber train.
New 3-packs make modeling lumber service easy (total of 6 unique road #s)
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE AND BACKGROUND INFO:
Railroad boxcars are perhaps not only the best-recognized pieces of equipment ever put into service but also one of the most identifiable symbols of the industry itself. During the early years of the industry freight was hauled on simple flatcars or early gondolas. In Upstate New York was the burgeoning Mohawk & Hudson Railroad, the first chartered system in the United States which later became part of the New York Central, came up with the novel idea of covering its gondolas in 1833 since the railroad dealt with snow throughout much of the winter. The cars development continued to improve over the years such as switching from basic wood construction with steel outside-bracing, within the same size specifications; 40 feet, a standard size employed by the American Association of Railroads (AAR). To better enhance crew safety, in 1968 the AAR legislated the removal of roof walks. The 40 foot boxcars needed to be -modernized- to adhere to the AAR mandate. This was to be completed by 1978 for cars in interchange service. Some of these cars had side and end ladders cut down, in some cases, modification included lowering the brakewheel. What made boxcars great, at least in the eyes of the railroads, was, their ability to haul about anything! Railroads thrive on redundancy to maximize efficiency.
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Blue
Flags (11) and Mailboxes (8) - Canadian flags used from 1965-present
These SceneMaster accessories are a great way to detail any modern HO layout! The set includes 10 small and one large flag printed in full color and complete with poles, perfect for display at schools, homes, factories, businesses and all types of government and public buildings. The set also includes eight mailboxes (4 open and 4 closed) with posts, perfect for many city neighborhoods or farm homes.
HO NSC Ballast Hopper - Herzog (Early) (6pkg)
1977+
6-Pack includes the following numbers, all individually packaged: #6307, #6320, #6335, #6359, #6388, #6402
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
HO 60ft Bulkhead Flatcar - TTPX #804438
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
HO 5820 Covered Hopper - Procor/UNPX (Blue Stencil) (6pk)
Includes the following numbers, all individually packaged:
#122070
#122081
#122090
#122098
#122104
#123110
Era: 1979+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO Slab-Side Covered Hopper - Canadian Pacific (CP Script) #380635
6 Hatch
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
HO F30A 50Ft Flat Car w/Sleeper Van - Norfolk Southern (NS MOW) #62756
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
Rapidos F30 Camp Cars Feature
All-new camp trailer loads in four styles
End railings and platforms
Photetched details
Multiple car numbers per scheme
HO RTR 53Ft Rivet Side RoadRailer Trailer - Norfolk Southern (Triple Crown) #460007
Rivet Side Large Triple Crown Norfolk Sou.
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
HO Scale 53 Hyundai Hi-Cube Container 2-Pack - Hub Group ex-STAX Patches - UPHU 239567/240193
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX #16104
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO EMD SD9 - DCC & Sound - Chicago, Burlington & Quincy #834
-white frame
Chicago, Burlington & Quincy
- Phase IV (First time for a plastic model!)
- Higher short hood with a corresponding cab height
- Cornered-off section on the long hood behind the cab
- Two 48inch radiator fans as opposed to the normal (four) 36inch fans
- Conduit pipes were removed from the top of the radiator
- No ladders on the short hood end
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO Scale Gas Station Accessories
This kit includes 2 globe gas pumps, an oil rack, a trash can, one large sign and 2 small signs. Instructions and decals included.
Flat Brushable Acrylic - Rusted Umber - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
HO F89-F89ft 8in TOFC Flatcar - XTTX #153135
MODEL FEATURES:
- Die-cast underframe
- Weighted for trouble free operation
- Raised and lowered hitches included
- Use for dedicated intermodal trains or mixed freight
- Detailed deck
- Wire formed brake plumbing
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Separately applied wire grab irons on and ladders
- Separately applied brake ratchet
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Machined metal wheels
- Wheels with RP25 contours operate on Code 55, 70, 75, 80, 83, and 100 rail
- Body mounted McHenry operating scale knuckle couplers
- Minimum radius: 22 inches
- Recommended radius: 24 inches +
- XTTX version: cars have 4 hitches to handle different trailer lengths. Extra raised and collapsed hitches included to model any configuration.
HO - Airhorns (Unpainted Brass Casting) - Delaware & Hudson Nathan M-3RT1
w/Bracket; 2 Bells Forward, 1 Back
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Nickel Plate Road #558
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
Perfect for moving bulk loads of all kinds that dont require protection from the weather, the WalthersMainline 34ft 100-Ton Two-Bay Hopper is a versatile addition to HO operations!
One time run of these road numbers, order now - limited quantity available!
In service from the 1970s to the present
Used to haul ballast, sand, gravel, ore and other bulk loads
Factory-applied door and brake details
Heavy die-cast metal underframe
Add a realistic load in minutes with the cast resin Chooch Gravel Load (214-7292) sold separately
Correct 36in RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
ProtoThrottle Pocket
Store and protect your ProtoThrottle with the ProtoThrottle Pocket. Made from strong and durable black PETG plastic, this holder will cradle your throttle securely and out of the way when not in use, while still providing access to the controls if needed. Three mounting holes in the back make for easy attachment to a wall or the layout fascia.
Specifications:
3.4(W) x 2.225(D) x 4(H) inches
HO GE ES44AC - Standard DC - Canadian National (Web site) #2915
Evolution Series GEVO
Product Information
Bring the power of todays railroading to your HO layout with the WalthersMainline General Electric Evolution series diesels.
Introduced in 2005 to comply with tougher emission standards, and more known among railfans and modelers as GEVOs, these big engines have quickly become one of the most popular locos worldwide. Designated as the ES44 (Evolution Series, 4,400 horsepower), prototype variations in North American service include locos with DC or AC traction motors and buyers have also specified center idler axles, as well as high adhesion or steerable trucks.
Features of the models include:
Limited edition - one time run of these roadnumbers!
Model todays railroading at WalthersMainline prices
The most popular prototype diesel in North America
Thousands in service from 2005 to the present
Correct profile radiator grilles & roof-top walkway surface details
Easily handles 18inch radius curves (22inch or larger recommended)
Six powered axles per unit
LED Lighting includes:
High or low headlight per prototype
Working front ditch lights
Three truck styles to match prototypes:
Standard high-adhesion
Steerable
C4 A1A center idler axle
Fully assembled
Same powerful drive as WalthersProto(R) locos featuring:
Five-pole skew-wound motor
14:1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Dual machined brass flywheels
Heavy die-cast metal chassis
Constant and directional lights
Add grab irons to your model with the GE ES44 Evolution Series Diesel Detail Kit (910-250, sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
1:87 CAT 450 E Backhoe Loader
Details:
1:87, Backhoe Loader
Dimensions:
4⅜ x 2¼ x 1⅞ in
110 x 56 x 47 mm
N Scale Short Barrel Ore Hopper - CN Mineral Brown #346020
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
Coping Saw Replacement Blade - 24 TPI (4 pkg)
These Zona Coping Saw Replacement Blades are 6-1/2inch Long, .100inch Wide, .018inch Kerf x 24 teeth per inch giving a fine finish. They fit coping saw 795-35670.
Back-Up Nose-Mounted Lights - Pyle Type E & F Units (2)
- Single sealed beam.
HO 40Ft PS-1 Boxcar - Ann Arbor (Direct Route) #1404
Date: BLT 4-57
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
Road Number Specific Details:
#1401, 1405, 1406
Have Pullman 8Ft Raised Panel Door
#1402, 1404, 1409
Have Pullman 8Ft Corrugated Door
Walthers Cornerstone HO Automobile Transloading Terminal Kit
Product Information
Put your HO modeling in high gear with Walthers Auto Industry series! Check out the structure kits from Cornerstone, WalthersProto Bi-Level and Tri-Level Auto Racks and SceneMaster Vehicles to bring the iundustry to life. Features of this kit include:
Prototypes load and receive new vehicles by rail
Build as part of a plant or a free-standing rail-served facility
Complete kit includes
Guardhouse and Gate
Two Auto Loading / unloading ramps
Chain link fence
HO 17,360 Gallon Chlorine Tank Car HOKX
FEATURES:
-Brake rigging molded separately
- Scale handrails
- Metal safety bars, tank fittings and safety placards
- AccuMate couplers
- Screw-attached 100-ton roller-bearing trucks for added reliability
- Accurate painting and lettering
- Brake wheel chain
HO ACF 4600 3-Bay Centerflow Hopper - The Andersons Inc. (AEX-Ex GTW) #410
This hopper is Primed-for-Grime
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO GP40 - Gold DCC & Sound - Port Harbor (1st Responders) #8955
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
Ready-Made Trees, Value Pack - Conifer Trees, 6-8 inches (12pk)
The best value in a ready-made tree and the quickest way to add trees to a layout! Trees have planting pin and optional, detachable base for temporary placement.
3-1/4 x 3/4 x 3-1/2inch 8.3 x 1.9 x 8.9cm - HO Scale
72Ft Centerbeam Flatcar with Standard Beam - Ready to Run - Southern #601086
Product Information
Shipping lumber by train is easy for your HO railroad with a fleet of WaltherMainline 72Ft Centerbeam Flatcars on the job! Designed to speed loading and unloading, these bigger cars entered service in the 1980s and quickly became a favorite with shippers and customers. These nicely detailed models are based on earlier cars built with oval cut-outs (popularly known as -opera windows-) on the centerbeam to reduce overall weight, which are still in service with a wide range of railroads and lumber producers. Other features include:
Limited edition - one time run of these roadnumbers!
Heavy die-cast metal underframe for excellent tracking
Correct 36In turned metal wheelsets
Proto MA metal knuckle couplers
HO 40ft ACF Modernized Welded Boxcar - Penn Central #138181
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Scale Semaphore Photo Etch
This is the photo-etch piece that comes with our #2336 Semaphore kit.
Evans X72 Box car: Conrail w/ Small Logo - Single Car #229401
Detail Variations:
As operated between 1976 to the 1990s.
6-pack includes the following numbers:
#229077
#229291
#229301
#229398
#229401
#229472
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
HO Vintage Gas Station Signs - Skelly (50)
Contains 50 full color signs from the 1930s-1950s. HO Scale. Unique weathering and application instructions included in all poster/sign packs.
HO RTR Thrall Rebuilt 40Ft Well Car - Trailer-Train (DTTX - Maroon Logo) #53347
(yellow, black; Large Maroon Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers, order now - limited quantity available
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
70-ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Peterbilt 389 Sleeper Cab Tractor w/Pneumatic Bulk Trailer - Orange, Silver, Chrome
N Scenic Accents(R) Figures -- Park Bums pkg(7)
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140089
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Custom Tire Balancer & Auto Junk Pile
Pre-painted and labeled for gas station detailing.
HO EMD SW9 - DC/ Silent - Santa Fe (ATSF Bookend Scheme) #2428
Santa Fe:
Delivered in 1953
Unique stepped louvers on hood
-Trash can- style spark arrestors
Large cab sunshades on front and rear cab windows
Carbody handrails
Working Pyle 360 warning light
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
Budd Manor Sleeper Maroon Scheme - CPR, No Name/Number
Each Baggage Dorm includes:
Realistic stainless steel finish
Track-powered interior lighting compatible with DC and DCC layouts
Full underbody detail including separate air, steam and electrical lines
Separate metal grab irons, stirrups and end gates
Accurate D22 brake equipment and piping
Super-detailed 41-NDO-11 trucks with end frames
Full, multi-color interior detail
3D CP beaver shields on CPR models - not just a printed picture!
Sprung diaphragms
Metal Macdonald-Cartier knuckle couplers
HO 19,600 Gallon Tank Car - ADM (Molecule Logo) #19426
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Built: NEW 3-96
N Scale Straight Turntable Extension Track Set
Set of Fitted Connecting Straight Tracks (3 pcs), Bumper Tracks (3 pcs) and Track Turntable Sections (2 pcs).
123mm (4 7/8 inches) Uncoupling track [2 pcs] - S123U
HO Consumer Product Signs - 1940-50s (42)
Consumer Product Signs 1940s-50s. Contains 42 full color posters and signs. HO Scale. Unique weathering and application instructions included in all poster/sign packs.
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21173
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
N Scale Pedestal Traffic Lights - Just Plug Lighting - pkg(4)
Product Information
Woodland Scenics N Scale Just Plug Traffic Lights are ready to place right out of the package and come hand-painted and authentically weathered. The Traffic Lights are pre-wired and made for use with the Just Plug Lighting System. Whether at rural intersections or on busy city streets, they add action to any scene. Check out the entire N Scale Just Plug line of lighting and accessories.
Pedestal Traffic Lights are ideal for busy intersections on downtown or suburban streets. Pedestal Traffic Lights are single-faced and the package includes two red lights and two green lights, enough for one four-way intersection.
#0 Golden Taklon Detail Brush - Triangle Handle
FEATURES:
- Brush is great for fine detail painting or any job requiring fine tip brush.
- Red triangle handles with silver lettering.
Tangent Scale Models HO PS4750 Covered Hopper ROCK -Delivery Blue 6-1978
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ROCK -Delivery Blue 6-1978- is available in the Blue Original 1978 scheme. Our -R- black and white logo and blue color is stunningly executed, check it out for yourself. ROCK lettering done right is something to behold, with accurate data stencil breaks and careful duplication of ROCKs data style. This is Tangent-accurate hand-drawn artwork. We have also matched the 1978 ROCK details including body-mounted brake center sill linkage, Miner outlet gates, a Universal hand brake and matching Universal brake wheel.
HO ALCo RS-3 - DCC Ready - Delaware & Hudson #4075
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
N Scale 10x12 Freight Doors - pkg(2)
7/16 inch OD Round Stainless Steel Rod - 22 Gauge x 12inch Long
Round Stainless Steel Rod - Not hollow (1 pc)
Outside Diameter: 7/16 inch
19/32 inch Vertical Railing (2pcs)
Use for hand rails, stair rails, roof trusses, grating and other steel structures. Precision Injection Molded in Styrene Plastic. May also be used for trellises, fencing window bars, etc.
SCALE
ALL
MATERIAL
STYRENE
COLOR
VARIOUS
HEIGHT IN INCHES
19/32
HEIGHT IN MM
15.1mm
WIDTH IN INCHES
3/32
WIDTH IN MM
2.4mm
THICKNESS IN INCHES
.055
THICKNESSS IN MM
1.4mm
LENGTH IN INCHES
6-7/8
LENGTH IN MM
175mm
Coe Rail, Inc. #19303 (brown, white) - Ready to Run
Limited edition - one time run of these roadnumbers
Prototypically correct roof with both X and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
36 inches turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
ITLA ScaleModels Inc HO 4170 Albany Manufacturing Co
The HO scale Albany Manufacturing Co. kit features unique laser etchings on all wall surfaces that can be highlighted with hand brushed acrylic paint to become significant weathered and eroding surfaces.
Finely etched details such as exposed Rebar and weathered masonry...
This kit also features the following...
A configurable footprint ... build it into a 4-walled structure 3in L x 3in W x 3.5in H
OR a Shallow Relief format 12in L x 0.5in W x 3.5in H
Separate Window Headers & Sills allow for easy painting
A Colour Sign Sheet includes Albany Mfg Co. name and many wall posters
Multiple Roof Top and Wall details included ...
Dual Snorkel Vents
Roof Access Hatch
Laser etched Brick Chimney
Wall Venting and Exhaust Ducting
Loading Dock Awning, Corrugated Skirting, Pallets, Access Ladder
Electrical Meter, Junction Boxes, Conduit, Coal Door and Fire Hose connections
Finely cut 2nd Floor Exit Platform and Access Ladder
Access Steps/Staircase/Railings
This kit is easily painted with basic matte spray paints and simple water based acrylics
HO 1955 Ford F-100 Pickup - Pennsylvania Railroad #A3077
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Rubber tires
85 ft Budd Large-Window Coach - Ready to Run - Alaska Railroad
(silver, blue)
Product Information
Add more seating on your classic streamliner quickly and easily with this WalthersMainline HO Scale 85Ft Budd Large-Window Coach! Nicely detailed, affordably priced and built tough for years of dependable service, this car is based on fluted-side cars used across the continent. 85Ft Budd Large-Window Coaches are perfect for use with other WalthersMainline HO Scale streamlined passenger cars.
Model passenger service in minutes at WalthersMainline prices!
Based on streamlined cars used by many roads
Eight authentic car types
Operates on 18 Inch radius curves
Correct prototype 85Ft length
Tinted window glazing
Fully assembled, ready for fun on your railroad
Rugged construction for years of service
Detailed body
Full interior
Correct 36 Inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
LED interior lights available separately
Molded drill starter points for add-on wire grab irons (sold separately)
HO Just Plug Lighted Vehicle - Work Truck
Work is play to this truck. From sun-up to sun-down this good old boy is always on the move!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
Park Light
Operates on 16V Dc or AC
LED light source = longer life
Brass construction
Prototypical size for N scale model railroad layouts
Quick fit base removes the need for gluing, nailing and screwing - Just Drill and Drop
Lights come with quick connection plug in wire harness.
Connects directly to power source. Resistors included.
Light can be removed from mounting base and replaced with different style to change the look of any street or highway on your layout.
HO F30A MOW Camp Trailer: Painted, Unlettered Sleeper Trailer
This trailer does not come with a flatcar
Spray Can - Light Green (Germain Air) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
CSXT #811
EMD SD80MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Models equipped with marker lights will be illuminated
Rubber MU hoses for durability
All New Tooling
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
See through steps
Illuminated ground lights
Front and Rear Illuminated Numberboards
Presenting EMDs 5,000HP 6-axle diesel in a whole new level of authenticity. Starting in 1995, EMD revived the 20 cylinder engine design, last seen in the SD45, and introduced the 5,000 HP SD80MAC. Athearn is pleased to announce this locomotive in Genesis 2.0.
CSX FEATURES:
Illuminated front and rear red marker lights
Illuminated Ditchlights alternately flash per prototype w/ effect on DCC+Sound version
Four panel dynamic intake per ex CR prototype
CSX specific roof mounted antennas
Repainted roof
Digital walkway mounted fuel gauge
LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE:
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO GE P42DC - DCC & Sound - VIA/Love The Way #908
Detailed Information
VIA FEATURES:
VIA-added extra nose light
VIA style antenna array
Dual 5-chime forward facing horns
Forward and reverse red marker lights
VIA approved artwork
Starting in 2017, VIA began to add wrapped schemes for their P42DC fleet. By 2019, -Love the Way- in both English and French was applied to a few select units with each side having a different version. In Nov. 2019, VIA applied the -Poppy- scheme, a tribute to veterans, to a small handful of units.
ROAD NUMBER SPECIFIC FEATURES:
#908
-Love the Way- scheme
English left side
French right side.
#911
-Love the Way- scheme
English right side
French left side.
#916
-Poppy- Scheme
P40DC/P42DC SERIES LOCOMOTIVE FEATURES:
Officially licensed product of Amtrak (Amtrak-painted units)
Officially licensed product of Via Rail Canada (Via painted units)
Officially licensed product of Operation Lifesaver (Operation Lifesaver-painted unit)
4 different nose variations: Amtrak as-built with strobes, Amtrak as-built without strobes, Amtrak rebuilt, and Via
Operating marker lights front and rear on Tsunami2 equipped models
Rear marker lights installed, but not connected on DCC Ready models
Newly-tooled lit number boards
Flashing strobe light and -Big-Hole- emergency light on equipped Amtrak units (Operational on DCC only)
Flashing ditch lights on non-strobe equipped Amtrak units synced with horn blow (Operational on DCC only)
Flexible rubber MU hoses
Flexible rubber trainline hose
Separately applied wire handrails
Exhaust stack
Photo etched metal radiator fan grille
Highly-detailed underframe including air tanks with air lines, air filter, and air dryer with two different types of rock shields
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting including operating ditch lights and red marker lights
Completely-redesigned die-cast frame for superior tractive effort
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Equipped with dual 28mm round speakers
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO ALCo RS-3, Phase 3 - DCC Ready - Burlington Northern #4082
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- fuel tank
- can motor
- flywheels
- blackened wheels with RP25 flanges and knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound V5 decoder
1940s - 1950s Gas Pumps - Unpainted - pkg(2)
Kit includes hose, nozzle, and pump pieces for two pump assemblies
HO RTR ACF 2970 Covered Hopper - Norfolk and Western #180423
Detailed Information
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons and stirrup steps
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple road numbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
HO 50ft FMC Combo Door Boxcar - Burlington Northern #316210
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Weighted for optimum performance
- Minimum radius: 18 inches
- Body-mounted, McHenry operating scale knuckle couplers
- Fully assembled and ready for your layout
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
Parked at the farm, ready for loading at the local co-op or heading down the highway, these SceneMaster Fertilizer Nurse Trailers are a must-have detail for rural HO scenes! Most often used to move liquid fertilizer from distributors to farms, the prototypes are also used to haul drinking water for livestock in some areas. The kit includes parts to build four complete trailers, each molded in two colors, that match the trailers included in the Cornerstone Fertilizer Distributor kit (933-4128) sold separately.
HO PRR Shops G41A Coil Car w/ Hoods - Pennsylvania Railroad (PRR) (G41A Delivery 1966) #387155
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38inch Wheels
PRR -G41A Delivery 1966- w/Hoods shows off the classic, as-delivered PRR Freight Car Red with those distinctive 1960s PRR Keystone logos on the hoods. PRR lettering is something that we like to get right, so feel free to pause and read all of those little lettering elements. We have duplicated the prototypes yellow paint masking for the hood guides and hood stacking brackets. These cars have such a distinctive look, from their rounded hoods to the extended cushioned draft gear and 125-Ton Trucks. Speaking of those hoods: Yes, they are removeable. Yes, they are stackable. Yes, you can even purchase extras! And since those hoods are removeable, we took extra care to paint the interior troughs and apply appropriate loading badges, trough data and centerline striping. Underneath the PRR G41A, you will find an accurate Hydroframe-60 Center-of-Car Cushioning system with Truck mounted brake hardware. The release rod even passes through the side of the car, just as you expect it to. The PRR G41A rides on Tangents new 125-Ton trucks with Truck mounted brake beam details and 38inch wheels with rotating Timken bearings. SKUs -01 through -05 were built in 1-1966, and SKUs -06 through -12 were built in 2-1966.
Shaped foam cradle gives you a gentle helping hand when working on the underside of your locos and cars. Cradle also has a compartment for holding small parts like screws, trucks, couplers etc. HO Scale Size
HO Enterprise 2-Bay Covered Hopper - Canadian National (MOW Red) #53314
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
Evans X72 Box car: Penn Central w/ Small Logo - Single Car #269827
Detail Variations:
As operated between 1973 to 1976.
6-pack includes the following numbers:
#266577
#266850
#269268
#269320
# 269827
#269899
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0018
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO PC&F 5241 CUFT - Boxcar - Pan Am - (B&M) - Single Car #3380
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
3/16 inch OD Round Aluminum Tube 0.014inch Thick x 12inch Long
Round Aluminum Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 3/16 inch
Juneco Scale Models Back Up Light - DDGM Pyle Double Horizontal w/jewels, plastic (2/pkg)
HO Scale H1b Hudson Steam - DCC & Sound - Canadian Pacific (Spans the World) #2818
-Late walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
Gunderson Multi-Max Auto Rack - BNSF
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
Norfolk Southern NS 169791 - Protect II
Built: RBLT 7-99
The Evans 100 Ton Coil Car carries coiled steel. This car is brown with brown hoods. The BNSF lettering is white on the car and white on the hoods. The model is equipped with metal wheelsets and Kadee® couplers.
N Scale 50Ft Boxcar - Norfolk Southern - #10 - #406818
Built in 1977 by FMC for Hartford & Slocomb Railroad, these 50Ft boxcars with Barber Roller Bearing trucks were later operated by the New Orleans Public Belt. Eventually, Union Pacific received the cars and painted them in their boxcar red scheme, with ex-Missouri-Kansas-Texas -BKTY- reporting mark and GATX lettering.
HO 1988 G43B Coil Svc. Gondola w/ Coil Racks (Coils Not Included) - Conrail (CR) #601888
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -1988 G43B Coil Svc.- With Coil Racks ? Coils Not Included in the now-classic Conrail red paint. This series represents the former PC-painted G43B series. Conrail maintained the lettering locations that PC did, painting the Conrail reporting marks, road number, and Conrail can opener logo in the same locations PC had stenciled them. The G43B prototype features cushion draft gear, giving the model a distinctive look compared to the other G43 classes. The top chord of the car has a -COIL STEEL LOADING ONLY- stencil to remind customers and railroad officers that the car is equipped with coil racks. Our model has coil racks too, and we sell beautifully executed steel coils for this car separately. We recommend a load of four coils if you want to replicate most prototype loading patterns ? for the size of coil we created. Yes, we did the math. These Conrail coil service gondolas are offered in 12 road numbers and feature details appropriate for these 1969-built cars.
Forest Blend
Bag - 18 cu in (294 cu cm)
Models medium to high ground cover, such as bushes, shrubs and trees, and is the perfect product to make medium to large trees. Use for any scale. Six realistic colorfast colors. Attach to Tree Armatures with Hob-e-Tac. Use Scenic Glue to attach to layout. Purchase the Scenery Manual for additional information about how to use the Landscape System.
Particle size approximately 5/16inch - 1/2inch (7.9mm - 12.7 mm)
Each package includes 21.6 cu in (353 cu cm) volume of material.
HO Trinity 3-Bay Hopper - DM&E (3pk) #1
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
Tangent Scale Models HO PS4750 Covered Hopper ROCK -Delivery Blue 6-1978
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ROCK -Delivery Blue 6-1978- is available in the Blue Original 1978 scheme. Our -R- black and white logo and blue color is stunningly executed, check it out for yourself. ROCK lettering done right is something to behold, with accurate data stencil breaks and careful duplication of ROCKs data style. This is Tangent-accurate hand-drawn artwork. We have also matched the 1978 ROCK details including body-mounted brake center sill linkage, Miner outlet gates, a Universal hand brake and matching Universal brake wheel.
Layout Control System - Single Color LED Fascia Indicator - White
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
PSC Transfer Van - E&N Division - CRHA - 76695
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
Scene Master Heavy-Duty Container Crane - Kit
Product Information
Serve smaller HO intermodal terminals with the new heavy-duty container crane kit from SceneMaster! Similar cranes fitted with container lifting equipment can be found dockside at many ports, and are often called on to handle heavier boxes at bigger facilities. Features of this detailed kit include:
Typical of specially-equipped cranes in use from the 1990s to the present
Detailed cab interior, lattice boom, crawler drive and more
Molded in yellow, gray, black and white plastic
Illustrated step-by-step instructions
Detail in minutes with SceneMaster 20ft and 40ft Containers, available separately
HO Surfers w/ Boards (5 pkg)
DCC Auto Reverse Module - Suitable for 1 to 10amp DCC Systems
AR10
Features of the AR10 Automatic Reverse Loop Controller
61692; Automatically controls polarity of DCC reverse loops
61692; Provides short circuit protection for loop
61692; Ready to run without any programming
61692; Trip current adjustable 1 to 10 Amps
61692; Easy hookup using screw terminals, no soldering
61692; Solid state design provides silent, reliable operation
61692; Status indication LED
61692; Additional output for remote LED
61692; Automatic or manual reset after short circuit shutdown
61692; Adjustable short circuit response time
082 Engine Grime - Enamel Paint - 35 ml
Obtain a greyish, dark and matt aspect that you find on many engines that have had a lot of use. Apply with a brush or an airbrush to obtain different results. Blend with a clean brush moist with Enamel Thinner.
HO 19,600 Gallon Tank Car - Tate & Lyle #51007
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Date: BLT 3-98
HO SD75M - DCC Ready - Santa Fe BNSF #226
Detailed Information
BNSF FEATURES:
Faded paint colors
Small EMD plow
Round deck mounted front ditch lights
Large Sinclair antenna
Early EMD trucks with hidden bearings
Road number specific details and artwork
Part of the original Santa Fe 1994 order, these SD75Ms are depicted as late in their life. Just before they were sold to PRLX, they soldered on looking beaten and battered, but still earning revenue for their owner. Renumbered to the 8200 class in the 2000s, they eventually returned back to their original Santa Fe numbers again, but with BNSF patches.
ROAD NUMBER SPECIFIC FEATURES:
#226
Ex-ATSF 226
small cab numbers
added rear number boards
yellow frame stripes
#231
Ex-ATSF 231
large cab numbers
yellow frame stripes
#249
Ex ATSF 249
large cab numbers
yellow frame stripes
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO Custom Right-of-Way Signs - Yard Limit (2pk)
N Scale AutoScenes - Lubeners Loading
The Lubeners load their luggage for a vacation away from the General Store.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:160 N scale models.
Set contains 4 pieces. Colors may vary from actual product.
HO UAC TurboTrain Additional Coach: Late Amtrak
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model.
N Straight Roadbed Track Section - 9-3/4in (24.8cm) (4/pkg)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Uni-joiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO Scale Turnout - Code 83 Nickel Silver Rail #6 Left-Hand
HO 13,600 Gallon Acid Tank Car - Union Tank Car/White (UTLX) #11330
ETA: July 2023
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Built & Ready Landmark Structures - U.S. Post Office
Assembled - 4-1/8 x 4-3/32 x 2-3/4 inches (10.4 x 10.3 x 7cm)
The Woodland Scenics(R) Letters, Parcels & Post is there for all your mailing needs. Hand-painted and weathered, this layout-ready post office features wood walls sitting atop a stone foundation and is and loaded with plenty of details to set the scene. Features include a covered porch that provides a place to wait when the lines are long, and a set of stairs leading to a side door. A chimney, rear loading dock and an unattached mailbox for dropping off mail at any time of day round out the detailing. Letters, Parcels & Post also contains interior and exterior LED lighting to show off the printed interior. The installed LED lighting is designed for use with the Just Plug(R) Lighting System. 30mA current draw.
BNSF w/ PTC #5915
BNSF Features:
All units feature new BNSF style cab roof antennas
Antenna Dome
PTC antenna in polybag
Variety of in-service details per protype road number
Narrow front snowplow
Nose door with window
High number boards
4-window cab side windows
Desktop control stand
Sunshades
Salem air filter
Rear brake wheel
Hi-adhesion trucks
High rear sand filler
Low rear vertical headlight
GENESIS DIESEL LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Replacement parts available
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included
Road number specific features:
#5915
Silver -replacement- plow
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.08 (10pcs pkg)
HO 40ft 16K Gallon Tank Car - Minnesota Corn Processors/DMIX #190135
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO GP9RM Mother & Slug - DCC Ready - Canadian National (Early) #7240, 241
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
The GP9RM Slug features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks with outside brake shoes or Flexicoil trucks
Traction motor details on gearbox
Detailed walkway tread
Metal side handrails
Footboard pilots or curved plate pilots on appropriate road numbers
Working head lights
Both models are available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO Union X-3 Tankcar - Products Tank Car (PX) #33451
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO Target Signal - With LEDs
Single head three light target signal. Green, yellow and red LEDs. Instructions included.
HO 19,600 Gallon Tank Car - Cerestar (NATX) #190190
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Built: BLT 11-99
HO Scale NSC 73Ft Centerbeam Flatcar - Trailer Train (TTZX) #861209
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
HO 34ft 100-Ton 2-Bay Hopper - Wisconsin Central #34032
Perfect for moving bulk loads of all kinds that don not require protection from the weather, the Walthers Mainline 34ft 100-Ton Two-Bay Hopper is a versatile addition to HO operations! Entering service in the 1970s, they are used to haul ballast, sand, gravel, and ore. Fully assembled and ready for service, each features separate, factory-applied door and brake details, a heavy die-cast metal underframe, correct 36in turned metal wheelsets and Proto MAX(TM) metal knuckle couplers.
HO PC&F 5241 CUFT - Boxcar - St. Lawrence & Atlantic (SLR) - Single Car #168
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO GE U25B Low Hood - DC Silent - Santa Fe: Pinstripe Scheme #1613
The HO scale U25B Locomotive features:
Phase I, II & III units represented in 1st run. (Phase IV & other units will come with future runs)
Single-window style for low nose units. (Double-window in future runs)
Both low- & high-short hood versions
Early high- & later low-style side doors.
Road specific details for each model
Working step lights on low-short hood models
Different roadname-specific exhaust stacks
Roadname-specific battery box doors on engineers side
Roadname-specific air cleaner boxes on rear
Working inspection lights on all units
Lighted control stand inside cab
Different types of fuel & air tanks, as appropriate
HO Heavy-Duty Off-Road Dump Truck - Yellow
HO MLW M420 A/B Set - DCC & Sound - British Columbia (Two-Tone Stripe) #641, 681
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
Airbrush Intermediate Set Double Action
This kit combines the Paasche double action VL-3AS, D500SR compressor and AC-7 cleaning kit.
VL airbrush with size 3 head, size 1 & 5 heads, 1 oz bottle assembly, 1/4oz metal cup, 1oz storage bottle, 6ft braided hose, 1/8inchBSP adapter, hanger, wrench and lessons book.
Specs:
Part Number: VL-3AS
Type: Double action, Internal mix, Siphon feed
Head Size: Size 1 (.55mm), Size 3 (.74mm), Size 5 (1.05mm)
Fluid Packing: PTFE - Can spray solvent or water based fluids
Air Volume: 20 PSI .5 CFM
Air Pressure: 20-75 PSI
Air Inlet: 1/4-20 Thread (Paasche thread) - adapters available
Bottle size: 1/4oz to 8oz bottles available
Spray Pattern: 1/32 to 1-1/2
Weight: 1.1 Lbs
Finish: Chrome plated body
The D500SR airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The D500SR is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses.
The compressor features include:
1/5 HP piston compressor
Regulator & moisture trap
Delivers 1-35 PSI depending on airbrush being used
Standard Paasche 1/4NPT hose fitting
1/8 BPS hose adaptor for competitor hoses
Auto shutoff feature
Carrying handle
Quiet: noise level is 47 Dbs
7 piece airbrush cleaning kit. Can be used to clean any airbrush.
HO NSC Ballast Hopper - Canadian National (Branchline) #90165
1978+
The Rapido Trains HO scale NSC Ballast Hopper features:
Removable ballast load
Diecast frame
Separate metal grab irons installed at the factory
Coupler cutbars and airhoses
Metal wheels
Semi-scale, metal couplers
Accurate paint and lettering
Multiple road numbers available for each scheme
Available in singles or multi-packs
Multi-packs boxed for individual sale
2-Pin Micro Connector - .098 x .06 x .12inch with 6inch Wire Leads (Black & White Wires)
This is a simple, two pin, 1 mm (0.039inch) pitch, micro quick plug wired connector. These amazing new micro connectors are nearly half the size of our popular, super-small Mini Connectors that we have offered for years. When connected together it is .098inch wide by .06inch tall by .12inch long, and it has 6inch long wires on both ends. This mini, quick plug connecter is ideal for hardwire situations where you may have to remove or disconnect certain components from time to time. This quick plug connector is also ideal for -Break Away- applications where connections to need to be broken easily for safety or convenience.
Each side of the connector has either a white and a black, red and black, or purple robotic wire (for polarity matching). The wire is 32 gauge, very flexible, and insulated with heat shrink tubing.
The Pitch (distance from center to center of the pins) is 0.039inch or 1 mm.
HO 53Ft Gunderson Husky-Stack Well Car & Containers - Arkansas & Oklahoma AOK (3pkg)
Road Numbers Include;
73503
73545
73609
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
HO EMD GP39-2u - DCC & Sound - Santa Fe ATSF #3409
Detailed Information
ATSF FEATURES:
New Santa Fe phase 1 GP39-2u body with corrugated grilles - First time in Genesis!
Illuminated -Swing out- style number boards
Stratolight Beacon (effect in DCC)
Newly tooled exhaust stack
Removed class lights
-Switcher- style walkway steps
Rear mounted fuel tank
Large front anticlimber
Starting in 1986, Santa Fe rebuilt 50 GP39-2s in their Cleburne, TX shops, designating them as -GP39-2us-. The -u- stood for -upgrade- which was a common term for Santa Fe rebuilds during this time. Other than the mechanical and electrical upgrades, Santa Fe added some unique details that distinguish these from their non-rebuild counterparts. These changes include: Fuel tank moved to the rear, new -swing out- style number boards, new style exhaust stack, and added an equipment door to the right side hood, just behind the cab. They also featured -switcher- style walkway steps for crew comfort during switching moves. A few even received modified corrugated radiator grilles.
ROAD NUMBER SPECIFIC FEATURES:
#3409
PH 1 body with chickenwire grilles
Leslie 3-chime horn
added access equipment door behind cab
#3415
PH 1 body with chickenwire grilles
Leslie 3-chime horn
added access equipment door behind cab
#3418
New PH 1 body with corrugated grilles
Nathan 3-chime horn
added access equipment door behind cab
GP39-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Delivery Target Red 1953+ Steel Bay Window Caboose - Illinois Terminal #982
Product: St. Louis Car Co. Illinois Terminal Steel Bay Window Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-ton Gould plain-bearing trucks with separate brake beam part
Wheels: CNC-machined standard RP25 .110inch tread 33inch wheels
DC/DCC Lighting Features: Interior Lights
Illinois Terminal (ITC) -Delivery Target Red 1953+- is the first of three different Illinois Terminal schemes we are offering in our first production run of St. Louis Car Company cabooses. These cars feature a safety-inspired bright -target- red paint. The caboose also has other colors present on the exterior, including -canary yellow- handrails and steps. Additionally, the Standard Railway Equipment roof received a coat of light gray paint. The prototype Illinois Terminal lettering above the cupola and the ITC with road number was applied onto thin metal placards which were bolted onto the car side and had an off-white appearance, which we have replicated this -off-white- reflective color with our graphics. Similar to our NYC offerings, our models include large (unlit) oil lanterns on one end of the caboose. The fully-painted and apportioned interior for these models includes the two tone green scheme as found in the original cabooses. Check out those double bunks as you peek through the large windows. Our Illinois Terminal delivery scheme cabooses are available in two road numbers.
33 Ft Tall 24 Ft Diameter
Typical of steel bins found on farms and at elevators to store all types of grains. Each section consists of six bands, which are stacked to various heights. Kits include parts to build the height shown. Also includes door, vents, dryer, chutes and grain head. All parts are molded in realistic galvanized color.
HO Roman Stencil Letters & Numbers - Black - 12, 6, 4inch - Waterslide Decals
Description: (formerly 87-326-2) Alphabets - Roman Freight Stencil - Black
HO Scale GP38 - DC/DCC Ready - Norfolk Southern (High Nose w/ Ditch Lights) #2758
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO NSC 5304 Boxcar - Canadian National (Late 80s Repaint) #557709
The Rapido NSC 5304 cu.ft. CN Combo Door Boxcar features:
Separate grab irons installed at the factory
100-ton Barber S-2 trucks, with metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe
HO GE Dash 9-40CW - DCC & Sound - Norfolk Southern NS #9773
NS FEATURES:
Front and rear ditch lights (Alternately flash in DCC mode)
High-mounted head light and number boards
K5 horn
Electronic brakes
Graham White Electronic bell
Delivered new in 2003 from GE, NS took delivery of class 9745-9811 Dash 9-40CW locomotives. Some unique features include: electronic bell, high mounted headlight, and electronic parking brake. We are offering both versions of the front cab schemes to choose from!
ROAD NUMBER SPECIFIC FEATURES:
#9754 -White face- scheme
#9773 -Unibrow- scheme
#9806 -Unibrow- scheme
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO GE C30-7 - DCC Ready - ATSF Santa Fe (Early Scheme) #8051
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #676712
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO Carfloat Apron - Kit
Dimensions:
8-1/2 x 8-1/2 x 8-5/8 inches
(21.2 x 21.2 x 21.6cm) (Height Above Water)
Based on where railroads transferred freight cars onto barges the Walthers Cornerstone HO Scale Carfloat Apron is where all the rail-marine action takes place. The Carfloat Apron structure consists of a moving apron (similar to a bridge) that can be locked to the float. This keeps the tracks aligned during switching and allows the barge and the apron to move up and down with the tides. Counterweights and lifting machinery are housed in the towers at the end of the apron.
This detailed HO Scale model is an ideal way to add waterfront traffic to your operations. Built on the waters edge, they require little space, but add plenty of interchange traffic. Often found serving large yards as well as industrial areas, they can be among the busiest spots on a railroad. The model features a positionable apron, detailed hoisting towers (unpowered), as well as supporting piers.
- Perfect addition to waterfront scenes
- Detailed hoisting towers and superstructure
- Metal Code 83 switch points included
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
Models depict in-service locomotives from the mid-1990s and beyond.
Road name and road number-specific painting and lettering.
Multiple road numbers offered.
New and improved high-torque motor and drive mechanism guarantees smooth operation.**
Operating radiator fans. Improved radiator fan drive unit with quieter operation and selective fan control.**
All-wheel power pickup and all-axle drive.
Heavy die-cast, zinc alloy chassis.
AuroraJanney scale head replica couplers installed.
NMRA RP-25 wheel contour with Code 110 tread width.
Minimum radius: 18? (recommended 22?)
* Lighting functionality is limited on DC models operating on DC track power.
** Improvement over our previously-released HO scale SD60F.
DC Version Features:
DCC ready with 21MTC connector.
Dual sugar-cube speakers (functional after installation of a DCC sound decoder).
Operates on DC track.
HO MLW M420 A/B Set - DC/DCC Ready - British Columbia (Two-Tone Stripe) #645, 687
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO Duplex Sleeper - Canadian National - Wet Noodle #1111 / Eastview
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO Siemens SC-42 Charger - DCC/Sound - VIA Rail Canada #2200
The latest in passenger Railroading technology has arrived at VIA Rail Canada with the Siemens SC-42 Charger! Designed to handle harsh Canadian winters while maintaining efficiency for fast corridor service, the SC-42 is the new face of passenger transportation between major cities in eastern Canada including Windsor, Toronto, Montreal, & Quebec City! Features include a TCS WOWSound CD-quality 16-bit 44,100Hz decoder with Audio Assist for easy configuration without CVs, and a Keep-Alive device for uninterrupted operation, even over dirty track. The WOWSound diesel-electric locomotive package includes an authentic horn, bell, prime-mover, startup/shutdown, compressor, cooling fan, coupler close/release, brake release/application, crew alert, grade crossing quill, station announcements, and more!
FEATURES INCLUDE:
- Siemens approved design
- DCC sound-equipped for sound, speed, direction, and lighting control
- TCS true CD-quality audio in 16-bit 44,100Hz sound
- Keep-Alive device that keeps your engine running during power interruptions due to dirty track or loss of electrical contact
- voice-guided Audio Assist programming tool for easy setup of almost all decoder functionality
- dual-mode NMRA compliant decoder
- directional headlights and marker lights
- interior corridor work lights
- steady/alternate flashing ditch lights
- die-cast frame with separately applied windshield wipers, grab irons, and detail parts
- E-Z Mate Mark II couplers
- Performs best on 22 inch radius curves or greater
59 Ft Cylindrical Hopper - Ready to Run - Logimex NDYX #816883
(gray, black, blue and white logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
-Limited Edition - one time run of these roadnumbers!
-Model of a National Steel Car 4550 cubic foot car
-Fully assembled, ready to run
-Thousands used in North American grain and potash service from 1972 to the present
-Trough or round loading hatches as appropriate
-Four different car numbers for each roadname
-See-through running boards
-Detailed brake gear, roof hatches and end ladders
-Correct 36Inch turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO Value Line RTR - 13 Panel Coalporter - Conrail Quality #505304
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO NSC 60ft Ingot Flat Car - HPJX National Steel Car
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
8 Packages
Used on Boxcars, Flatcars, Auto Racks, Cabooses & More 1970s to Present
Simulates End-of-Car Cushioning Devices that Provide Extra Protection for Fragile Loads
Realistic Appearance
Installs Easily on Most HO Models
Parts to Convert 4 Cars (2 Pockets Each)
Use with Proto MAX & Most Popular Couplers (sold separately)
HO Just Plug Lighted Vehicle - Cool Convertible
Rag-top down and summer in mind, this convertible is ready for a Sunday drive!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
HO Yellow Track Bumpers (4pk)
Detail new or existing HO sidings and more in minutes with the assembled track bumpers from Walthers, featuring:
- Perfect protection for industrial spurs, yard tracks, passenger stations and staging yards
- Fits popular modeling eras from the 1940s to the present
- Available in two authentic colors
- Four layout-ready bumpers in each set
- Use with Code 83 or Code 100 HO track (sold separately)
HO B-50-15 Boxcar - As Built w/ Viking Roof - Southern Pacific (1946 to 1952 scheme) #15315
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
HO PS-2 Covered Hopper - Penn Central #74216
FEATURES:
- 50-ton friction bearing or 70-ton roller bearing trucks (as appropriate by road name)
- Detailed brake gear
- Accumate couplers
- Prototypical painting and printing
HO Trinity 3230 Covered Hopper - CIT Group (CBFX) #440506
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
The Trinity 3230 Pressure Differential covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
HO RTR 55 F-100 Panel Truck - Police/Black
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
HO 36ft Old Time Stock Car - CCCC #2440
MODEL FEATURES:
- Era: 1890s-1910s+
- Separately applied roof walk
- Wire truss rods
- Molded plastic underframe with separately applied brake cylinder
- Painted and printed for realistic decoration
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Fully assembled and ready-to-run
- Minimum radius: 15 inches
HO Scale Thrall 53Ft Articulated Well Car Set - TTX #728674 (3pkg)
Features:
Each car consists of three wells--A,B & C.
Walkway variants specific to prototype
Etched metal detailing
Detailed air reservoirs
Detailed brake valves
Sharp hand grabs and stirrups
Runs on 18inch radius
Recommended for 22inch radius
Floor pin holes for Atlas and other brands of containers
Product Information
When the domestic intermodal container market settled out in the late 90s, the 53Ft long container emerged the winner. Car builders responded with new wells of like size to accommodate the new standard. Introduced in series service in early 2000, Thralls triple 53Ft articulated well car was certainly the best looking of the 53Ft wells. Angular wheel cutouts, 3 flared-bottom wide and 8 narrow side posts give this intermodal age well car character.
8-1-2 Passenger Car - Pullman (Assigned NYC): Centdoya
MASTER MODEL FEATURES:
Full interior detailing
Scale operating diaphragms
Ice or Pullman Mechanical a/c as appropriate
Full, separately-applied underbody detail (brake piping, steam traps, brake rigging, etc.)
Scale window glass
Detailed prototypical trucks with free-rolling metal wheels
AccuMate couplers
Recommended Minimum Radius: 24inch
HO Gunderson Multi-Max Auto Rack - TTX (White) #698224
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
HO Gunderson 6276 50Ft Plate F Boxcar - UCRY #15915
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
HO High Cube DD Plug Box - BCOL #100438
MODEL FEATURES:
Separately applied brake wheel
Underbody with brake system details
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO Champion Brake Wheels - Red Oxide (8pcs)
8 brake wheels for freight cars.
HO PC&F 5241 CUFT - Boxcar - BKTY Patch 2 (UP) - Single Car #153475
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Duplex Sleeper - Amtrak - Phase I #2402
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO PS-2-4427 High Side Covered Hopper - Milwaukee Delivery 3-1967 #97890
Product: Pullman-Standard PS-2CD 4427 ?High Side? Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36″ Wheels
? Milwaukee Road MILW ?Delivery 3-1967? wears the classic yellow and black graphics as applied to this 300-car order from Pullman-Standard in 1967. Tangent?s previous run from 2018 featured Milwaukee?s 1968 order of cars with gravity-pneumatic outlet gates. We have carefully replicated the lettering on every panel, bay and center sill from bold MILWAUKEE ROAD to the tiniest PS lot 9174 stencil number. All of the lettering is present and accurate. These cars feature Miner gravity gates and a PS ribbed-style roof hatch. The model also features 100-ton Barber S-2 trucks with rotating Timken caps. Each SKU number varies with CAPY, liner stencil and related Pullan date information. We hear you Milwaukee Road modelers, and your continued requests for more MILW Tangent covered hoppers in our correct shade of Federal Yellow!
HO Intermountain 4-Panel Coalporter, Canadian National
CNA Website scheme
Features:
Sharp Painting and Lettering
Prototype Accurate Paint Schemes
Multiple Road Numbers
InterMountain 100 Ton Trucks with 36in Metal Wheelsets
Metal Knuckle Couplers
HO RTR Trinity 25K Gallon Tank Car - Archer Daniels Midland ADMX #25411
(black, white- Molecule Logo)
Product Information
A versatile car for contemporary HO layouts, the WalthersMainline 25,000-Gallon Tank Car can serve a wide range of industries. Based on widely used prototypes that entered service in the mid-2000s and are still in service today, features of the model include:
One time run of these road numbers, order now - limited quantity available!
In service from mid-2000s to the present
Prototypes handle fuel oil, crude oil, vegetable oil and more
Separately applied manway, protective top filling housing with hatch, pressure relief valve
Underbody features separately applied wire safety rails, skid protected bottom outlet valve, steam inlet and outlet, brake equipment w/cylinder and rods, and train line
Finely molded factory-installed railings, ladders, walkways, placards & stirrups
100-ton trucks
Correct 36inch turned metal RP-25 wheelsets
Proto MAX(TM) metal knuckle couplers
HO GMD SD40-2 - DCC & Sound - Ontario Northland: Heritage #1730
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
2mm Static Grass - Spring Alpine Grass (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #138518
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO Railroad Car Shop - Kit
DIMENSIONS:
11-5/8 x 8-13/16 x 7-5/8 inches (29.5 x 22.4 x 19.4cm)
Track center lines 2-3/4 inches (70mm)
The prototypes for railroad buildings like the Walthers Cornerstone HO Scale Car Shop evolved into long, specialized structures dedicated to freight or passenger car repairs. Several tracks ran the entire length of the building so cars could be moved quickly between workstations handling trucks, brakes, interiors and other appliances. Perfect for servicing any kind of equipment, this kit features a modular design so several can be combined to build a larger building, and its a natural for modeling all kinds of heavy industries.
Without the car shop, a railroad just does not run. Big enough to look right, small enough to fit steam- or diesel-era layouts, this model is packed with features. Detailed brickwork, an authentic saw-tooth style roof with skylights, separate windows, roll-up doors, openings in the floor for rail, everything right down to the decals, is included.
- 3-stall brick Car Shop
- Modular design allows kits to be combined for a larger complex
- Saw-tooth style roof
- Great for steam or diesel-era layouts
- Molded in appropriate colors and clear plastic
HO 70-Ton 12-Panel Hopper - Canadian National #326099
Blt.7-64
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
Tru Color Paint - Acrylic - Matte Railroad Tie Brown - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO H-6-G - DC/Silent - Canadian National Railway (Straight Wafer) #1383
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO RTR SW1500 Switcher - DCC & Sound - Conrail #9614
ETA: January 2023
Detailed Information
SSW FEATURES:
SP-style lighting package with -head knocker- style Gyralight fixtures
P-3 horn
Flexicoil trucks
As-delivered configuration with footboard pilots, pilot face grab irons, early cut levers and corner frame gussets
1,100 gallon fuel tank
Full cab interior
In the first half of 1968 the Cotton Belt received their first SW1500s and they came with all the features of their SP counterparts of that era.
SW 1500 LOCOMOTIVE FEATURES:
Detailed cab interior
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Drop steps unless noted
MU stands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Exhaust stacks
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
Printed numberboards
Fine scale handrails
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
HO Hyundai 48ft Exterior Post - NACS #600030
PROTOTYPE TYPE:
48ft Exterior Post containers were introduced in 1986 and were a common site on nearly all double stack container trains of the later 80s, 90s, and 2000s. These containers were used for domestic freight service and were purchased by numerous railroads and freight operators in large numbers. These containers were a unique design in which the front and side container panels were supported by aluminum channel posts mounted outside of the container box to provide additional capacity space for larger pallet stacks within the container interior. The posts are a simple spotting feature for these styles of containers. Hyundai was one of a handful of manufacturers of exterior post containers, and while nearly-identical in design to one of their competitors, the additional drainage channel on the top of the container at the head end, and full-height end corner posts differentiate this container from its competitors design. Some of these containers served secondary lives for more than one operator, leading to some interesting graphic combinations over their lifespans. Changes to over-the-road length allowances for 53ft containers and trailers brought about the eventual demise of the 48ft container and a majority of them were withdrawn from service during the mid-2000s and beyond, though limited numbers still remain in service today.
FEATURES:
Hyundai Roof Configuration Version:
A unique feature of the Hyundai design was the additional water drainage channel near the front end of the container and the forward vertical framing members that extended the full height of the container. We have modeled the detail that differentiates this container from those of other manufacturers of 48ft exterior post containers.
Sharp And Accurate Paint And Lettering:
Classonemodelworks.com provides accurate paint and lettering taken from photographs of the prototype, and numbering that matches the class numbers for each operator or railroad. Our containers come with the exterior posts already painted to match the aluminum color of the prototype containers and galvanized coloring for the upper and lower structural channels.
Accurately Dimensioned:
These containers have been accurately reproduced from hand-measured field dimensions of the actual containers, right down to every visible detail. Classonemodelorks.com stands for accuracy and we strive to provide that with every model we produce.
Accurate scale Door latching Details:
Classonemodelworks.com believes in providing models that accurately depict the prototype equipment. Keeping that as our core, we are proud to provide highly-detailed cast door locking bars, latching mechanisms, door bumpers and angled bar lifter.
HO Scale GP38 - DC/DCC Ready - CSX (Grey & Blue/ B Scheme) #2013
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
60 ft NSC 5150 3-bay Covered Hopper - Union Pacific #90568
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. They have worn a wide range of colorful paint and lettering schemes over the years, 59ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59ft Cylindrical Hoppers feature:
Limited Edition - one time run of these roadnumbers!
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36In turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 60Ft Bulkhead Flat - Northwestern Oklahoma Railroad NOKL (3pkg)
Road numbers: #725357, 725361, 725383
MODEL FEATURES:
Separately applied end details and brake wheel
33inch machined metal wheels with RP25 contours
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
Tru Color Paint - Acrylic - Clear Satin - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 40ft 16K Gallon Tank Car - Amaizo/UTLX #66810
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Central Valley
200' Single-Track Heavy-Duty Laced-Parker-Truss Bridge-Kit
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) #653287
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Alco RS-11, 2nd Run - Diesel Locomotive - DCC Ready - Maine Central - Pine Tree #801
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
Mine Run Coal (10.8 in3)
Use Ballast and Coal for any scale to model realistic railroad track, gravel roads, crushed rock and stones, hopper loads and coal piles. Available in several colors and sizes, you can mix and match for a superior realistic effect. Ballast and Coal are lightweight and easy to use. Watch the Woodland Scenics video about how to apply it and attach with Scenic Cement(TM).
ALLERGY CAUTION: Ballast contains tree nut by-products.
HO AutoFlood III RD Coal Hopper - PGNX #1196
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
N Scale Single-Track Straight Viaduct - 9-3/4in (2pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly.
The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO 60ft PS Flatcar - Trailer Train/HTTX #90820
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) (6pkg) #2
1935+
6-Pack includes the following numbers, all individually packaged: #741003, #742975, #743816, #744293, #744405, #745324
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO Trackside Structures Set - Kit
Product Information
The Walthers Cornerstone HO Scale Trackside Structures Set includes easy-to-build kits for a wooden interlocking tower, crossing shanty and speeder shed. The structures match those offered in the Walthers Built-ups Trackside Structures Set but are unassembled and undecorated for easy customization and kitbashing. All parts in this version are molded in gray for ease of painting, and complete instructions for all three buildings are included. Used as a group or by themselves, these buildings say -railroad- on any layout, module or diorama scene. Theyre typical of the designs used by North American railroads large and small from the 1880s to the 1970s so they fit any location and era. Perfect for main, branch, shortline or industrial roads, you can use several sets to make your entire line more realistic. Use the Trackside Structures Set with a wide variety of Cornerstone HO Scale railroad buildings.
Easy-to-build plastic kit
Fits any North American steam or diesel-era railroad from the 1800s to the 1970s
Includes three different structures
Molded in gray plus clear window glazing
Structures in the Trackside Structures Set measure:
Crossing Shanty-Gate House: 1-3/4 x 1-7/16inch (4.5 x 3.7cm)
Interlocking Tower: 3-5/16 x 2-3/8inch (8.4 x 6.1cm)
Speeder Shed: 2 x 4-7/16inch (5.1 x 11.3cm)
Metal Roundhead Self-Tapping Screws - 0-48 x 3/8in (24pk)
RTR 67Ft Trinity 6351 4-Bay Covered Hopper - ADM
Product Information
Expand grain traffic in minutes with layout-ready WalthersProto(R) 67Ft Trinity 6351 Four-Bay Covered Hoppers! Introduced in the early 2000s, these large-capacity cars are industry favorites for handling dired distillers grains (DDG), malt and many other food products. Other features of these HO Scale replicas include:
Limited edition - one time run of these roadnumbers!
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct 36Inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO International 4300 Utility Truck w/Drill - Assembled - Yellow
Product Information
Licensed replica of popular International trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled and painted
Die-cast metal and plastic parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
Introduced in 2002 to replace the 4000-series trucks of the 1990s, the medium-duty 4300 was built in three variations and became a very popular chassis for a variety of commercial applications. Today, theyre still in production as the International Durastar.
INTERNATIONAL(R) and other International Truck trademarks are licensed by International Truck Intellectual Property Company, LLC.
N Scenic Accent Figures - Track Workers (6/pkg)
HO RTR Trinity Rail 3281 Cu Ft 2-Bay Covered Hopper - CIT Group/ Capital Finance (NRLX) #34156
(Ex-Ciment Quebec, 2005, gray, yellow conspicuity marks)
Product Information
This HO Scale TrinityRail 3281 Cu.Ft. 2-Bay Covered Hopper is based on a common late-1990s and later prototype commonly used to haul frac sand, roofing granules and similar materials. With the boom in frack sand traffic it isnt uncommon to see these prototypes used in unit trains. Prototype cars measure 41ft-11inch long, and the cars are equipped with three or five round loading hatches and a pair of gravity outlets for commodity off-loading. Compared with earlier 2-bay covered hoppers, these cars are distinctive. Notably, an overhanging arched roof, heavy top reinforcement stiffener, and folded jack pads at the bolster are spotting features for the Trinity 3281. This design has proven to be popular with shippers and railroads alike. The HO scale freight car features an injection-molded body, applied wire grab irons, photo-etched walkways and working shelf-type knuckle couplers without trip pins for scale appearance. Other details include roadnumbers printed on the truck sideframes, coupler cut levers, NMRA compliant car weight, trucks with spinning bearing caps, multiple roadnumbers per scheme and graffiti on select roadnumbers.
HO NSC 60ft Ingot Flat Car - RTAX Liberty Railway Services
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
Flat-Type Single-Chime - Air Horns (2)
Details West HO Scale locomotive Air Horns are based on those used on locomotives and cab car rooftops. Available in several designs to match a variety of prototypes, each part is a detailed brass casting.
HO ALCo RS-3 - DCC/Sound - CP Rail (Multi-Mark) #8427
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
OVR Exclusive - HO Bi-Level Auto Rack - CP Rail/TTGX #156159
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO Maxwell Ave. Home - Kit
The Rix Maxwell Ave. House kit is modeled after mid western homes built during the 1930s and 1940s.
They feature clapboard walls, asphalt roof and brick porch.
The Rix Maxwell Ave. House kit come in three versions.
Kit number 201 is a small house with no porch.
Kit 202 is a house with front porch.
Kit 203 is a house with side porch.
Kit 204 is the porch only.
Rix Maxwell Ave. House is molded in three colors.
Roof, Brown.
Walls, White.
Brick Porch, Red.
Dimensions:
28 wide x 31 deep scale feet
3-7/8 x 4-1/4 inches
HO Value Line RTR - 13 Panel Coalporter - Conrail Quality #505570
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
G2 Dash 9-44CW - DCC Ready - Norfolk Southern #9225
ETA: Late October 2022
Detailed Information
NS NOTES:
Each year from 1995 to 2005, NS placed an order with GE for Dash 9 series locomotives, with a grand total of 1215 units delivered. They are used in all types of mainline service. Some units were equipped with an APU (auxiliary power unit) mounted on the walkway, which operated to provide basic locomotive systems while the prime mover was shut down, potentially saving fuel. The units on offer are from the 1998 order.
ROAD NUMBER SPECIFIC FEATURES:
#9169
Large and small Sinclair antennas
K9 APU on walkway
Electronic parking brake
#9131
PTC antenna arrays
Standard parking brake
#9225
PTC antenna arrays
Standard parking brake
DASH 9 SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
All-New bluetooth controlled Tsunami2 DCC Sound Decoder
Blunami will change the way you enjoy the model railroading hobby
The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.
Currently the app is only available for Apple iOS devices (versions 8 or newer). The app offers an easy graphic interface to adjust all Blunami settings and features with drop-downs and slider bars. All programming can be done through the app, as well as with your DCC system. You no longer need to understand CVs or own a command station to run your trains!
HO Scale H1a Hudson Steam - DCC & Sound - Canadian Pacific (Beaver Shield) #2806
-Late walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
Fine Turf - Earth - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
HO 13,600 Gallon Acid Tank Car - Union Tank Car/Black (UTLX) #13833
ETA: July 2023
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Juneco Scale Models Canadian National GP High Hood Bell
Genesis Motor Retrofit Kit for RTR SD45/SD40 with Included extended Dog-Bone universal - 2pcs.
Features
Used with the DCC-Sound Ready underframe only. Earlier models that do not have the Sound Ready starburst on the box will be able to obtain the underframe (ATH98542) separately.
Simple Installation
Molded on motor saddle mounts
Included extended Dog-Bone universal
Included mounting screws
Balanced Flywheels
DCC Ready- NMRA 8 pin and Decoder Harness plugs
Pre-soldered motor wire leads
- For Models produced after 8/2013
Overview
Three benefits to Genesis power to your RTR Locomotives:
Streamlined DCC speed curves
Lower motor current draw
Quieter motor operation for DCC Sound
Note - only 2 Included extended Dog-Bone universal - not 6 as pictured
HO Standard Caboose - NW Canadian Operation #555009 - SPECIAL RUN!!
Otter Valley Railroad, limited edition, special run!! Order yours now!!
HO 54ft 23K Funnel-Flow Tank Car - Corn Products #1988
Add variety to your modern HO fleet with these WalthersProto replicas of the 54ft 23,000-Gallon Funnel-Flow Tank Car! Packed with details including the unique funnel-shaped body that speeds unloading on the prototypes, other features include:
- One time run of these roadnumbers, order now - limited quantity available!
- Introduced in the 1960s, still built and operated today
- Prototypes handle all types of petroleum and food products
- Etched metal walkways and platforms
- Factory-applied grab irons
- Brake train pipe and brake rigging underbody detail
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling metal axles and 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 26Ft Can-Car Dry-Van Trailer - CP Rail #268347
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
HO RTR Thrall 5-Unit Rebuilt 40Ft Well Car - Trailer-Train DTTX #748781 A-E
(yellow, Large Red Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft on both single and five-unit cars. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers - limited quantiuty, order now!
100- and 70-ton roller bearing trucks
Correct 36inch and 33inch RP-25 turned metal wheelsets
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
Proto MAX(TM) metal knuckle couplers
HO RTR 68Ft Bulkhead Flatcar - Canadian National CN #622415
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
HO EMD GP39-2 - DCC & Sound - Delaware & Hudson #7419
Detailed Information
D&H FEATURES:
Phase 1 body with chickenwire grilles
Illuminated number boards and class lights
Blomberg B trucks with Hyatt bearings
Leslie 3-chime horn
Small EMD front plow
Large Sinclair antenna
Cab roof rain gutters
The D&H received all 20 of the Readings GP39-2s when Conrail was formed in 1976. They continued to operate in patched green and yellow paint for several years, but many were subsequently repainted into D&Hs attractive solid blue and yellow scheme. When mixed in with other EMD and ALCO models, they added a splash of variety to passing trains. We are offering 3 different versions of the blue scheme to add to your fleet!
ROAD NUMBER SPECIFIC FEATURES:
#7404
Solid blue repaint with silver trucks and yellow plow
#7405
Blue repaint with solid yellow nose and plow
#7419
Blue repaint with striped yellow ends and yellow plow
GP39-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Marine Industries Piggyback Flatcar - Canadian Pacific #505704
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
N Scale Snap Track Conversion Track - 2-1/2in (64mm)(2/pkg)
Allows transition from Unitrack to other conventional N Scale track systems.
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly.
The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian Pacific #304661
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
72Ft Centerbeam Flatcar with Standard Beam - Ready to Run - Southern #601070
Product Information
Shipping lumber by train is easy for your HO railroad with a fleet of WaltherMainline 72Ft Centerbeam Flatcars on the job! Designed to speed loading and unloading, these bigger cars entered service in the 1980s and quickly became a favorite with shippers and customers. These nicely detailed models are based on earlier cars built with oval cut-outs (popularly known as -opera windows-) on the centerbeam to reduce overall weight, which are still in service with a wide range of railroads and lumber producers. Other features include:
Limited edition - one time run of these roadnumbers!
Heavy die-cast metal underframe for excellent tracking
Correct 36In turned metal wheelsets
Proto MA metal knuckle couplers
Spray Can - Base White (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO SP C-40-3 Steel Cupola Caboose - Southern Pacific (Delivery Scheme) #1115
1940+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
HO 60ft Bulkhead Flatcar - CP Rail #316399
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Conrail Rack / Trailer-Train Flatcar TTBX #964338
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
O (1:48) ABS Stair Rail (1Pc)
Use for hand rails on stairways. Precision Injection Molded in Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
Tip: ABS Stair Rails may be curved to fit circular application by softening them in warm water or heating with a hair dryer. Stairs may be modified to fit the circumference of a tank or other curved surface by cutting off the stair stringer from the side to be cemented. Tape the stair in place. Attach each stair step separately
SCALE
O
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
7/8In
HEIGHT IN MM
22.2mm
WIDTH IN INCHES
1-1/2In
WIDTH IN MM
38.1mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
24In
LENGTH IN MM
600mm
HO Bathtub Coal Gondola - MLMX/ Sims Metal #322
Built: 10-08
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO ACF 4600 3-Bay Centerflow Hopper - DT&I/Gray (3 pkg) #1
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
HO Scale H1a Hudson Steam - DCC & Sound - Canadian Pacific (Spans the World) #2808
-Late walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO Class D10h 4-6-0 - DCC & Sound - Canadian Pacific #1022
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
HO NSC 3650 cf 66Ft Railgon - GNTX #295512
Aurora Miniatures North America Inc. is proud to offer the National Steel Car 3650 cf 66ft Railgon Gondola in HO scale. These Canadian-built modern 66? gondolas were introduced in 2012, they were assigned the GNTX reporting mark and painted in the prominent Railgon scheme with a large Tuscan red TTX logo on a yellow background. They can be found across North America in steel mill service. Similar-looking gondolas were also built for BNSF, Canadian Pacific and other owners. We are offering 20 unique GNTX numbers along with a ?Data Only? version for the first production run.
HO GATC 2600 Airslide Hopper - Santa Fe #310003
MODEL FEATURES:
- Three different body styles
- Rectangular or oval shaker brackets
- See-through metal roof walk
- Highly detailed, injection molded body
- Fully-assembled and ready-to-run out of the box
- Detailed underbody including outlet piping
- Gravity or gravity-pneumatic outlets
- Roller bearing or Bettendorf trucks
- Factory installed wire grab irons and brake piping
- Coupler cut levers and train air lines
- Machined metal wheels
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Operates on all popular brands of track
- Minimum radius: 18 inch
1/72 Star Wars: Mandalorian Razor Crest Vehicle
ALL-NEW STAR WARS KIT: AMT proudly presents this all-new STAR WARS model kit featuring figures of both the Mandalorian as well as Grogu in his pod.
AUTHENTIC DETAIL: This kit was developed from files supplied by Lucasfilm to ensure authenticity. Tons of exterior -greeblie- details and recessed panel lines are present to bring the ship to life as seen on-screen.
FEATURES: Build the ship landed with gear down or gear up and flying, mounted upon a sturdy support stand. Open or closed entry and cargo bay doors and precise cockpit details round out the offering.
THE PERFECT PRESENT: Dont know what to get dad for his birthday? have an avid hobbyist or collector in your life? This model kit makes an ideal gift for any occasion!
Features:
1:72 scale, skill level 2, paint & glue required
100 parts
Molded in gray and clear parts
Built scale: 14inch inches
Ages 10+
1927 Jordan Victoria Sedan - Unpainted and Resin Cast Kit
Snapper Switch Machine Power Supply
Solid state, provides positive power to dual-coil switch machines. Protects from burnout due to stuck pushbuttons, short circuits, etc. Operates off accessory terminals of power pack or transformer up to 25V. 24V input can activate 5 to 10 coils simultaneously if connected to same control. Instant recycle time. Includes a section of Printed Circuit Mounting Track (PCMT).
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OAKX #56
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Kato Unitrack 20-015 N Scale - 186mm (7 5/16in) Ash Pit Track 2 pcs
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO F89F Trailer - TTX/Yellow #152833
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast underframe
- Wire formed brake plumbing
- Detailed deck
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Minimum radius: 22 inches
- Recommended radius: 24 inches
HO Cable Excavator w/Bucket - Kit
Product Information
Put this easy-to-build Walthers SceneMaster vehicle kit to work along your HO layout! The model features:
Designed for easy assembly - illustrated step-by-step instructions
Highly detailed to bring HO layouts to life
Plastic parts molded in realistic colors
Typical of shovels used from the 1950s to 1990s
Detailed crawler chassis, boom and bucket
Photo shows assembled model.
N Scale Curved Track - 45-Degrees - 13-3/4 Inch Radius (4pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
Acrylic Flat Colors - Light Blue - 3/4oz (23mL) Bottle
XF-23
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO Enterprise 2-Bay Covered Hopper - Penn Central PC #881497
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme