HO Maxi I Well Cars - DTTX #73146 (5pk)
Era: 1971-1990, 1991-2009
MODEL FEATURES:
- Fine ladder detail
- Separately applied brake piping and trainline hoses
- Weighted for optimal performance
- Body-mounted McHenry lower shelf operating scale knuckle couplers
- Prototypically correct 33 and 38 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO 40Ft PS-1 Boxcar - Port Huron & Detroit #1158
Date: BK 7-62
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
Tru Color Paint - Acrylic - Empire Builder Green - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
Evergreen Scale Models - Opaque White Polystyrene Half Round .04In x 14In (5 pcs pkg)
HO Greenville 86ft Double Plug Door Box Car - Wabash #55075
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: August 2021
Wabash -Original 1964- 1965+ Era is one of the many -classic- 1960s schemes seen on these cars, and represents one of the last schemes the railroad wore before being merged into the Norfolk and Western! This rolling billboard features Wabashs classy dark blue scheme with large Wabash lettering, and then undoubtedly the largest Wabash flag applied to any rolling stock, adorned with the -Follow the Flag- logo. Pure class. These cars were delivered in 1964 with full running boards but were soon modified in 1965. These significant modifications included the removal of the roof running board, the lowering of the brake wheel housing and removal of high grab irons and end ladders. Our Wabash model replicates this 1965+ look with exact features: an accurate 1964-built body, bolt -remnants- on the sides and ends of the model, and a roof with the old bolt locations of the running board supports! The features go on and on, including an accurate -lowered- Miner hand brake, 1965 replacement full-width Apex crossover platforms, 70T trucks with 33inch wheels, truck-mounted brake details and rotating Brenco-6 roller bearing caps. This stunning model is available in four numbers. (Please note there is no SKU 1/2 for this production).
Acrylic - PRR Brunswick Green - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 40ft Low-Cube Container - ANYU (3 Pack) #2
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered with new road numbers
HO RTR Trinity Rail 3281 Cu Ft 2-Bay Covered Hopper - St. Lawrence Cement SLCX #9
(2007; gray, Yellow Conspicuity Marks)
Product Information
This HO Scale TrinityRail 3281 Cu.Ft. 2-Bay Covered Hopper is based on a common late-1990s and later prototype commonly used to haul frac sand, roofing granules and similar materials. With the boom in frack sand traffic it isnt uncommon to see these prototypes used in unit trains. Prototype cars measure 41ft-11inch long, and the cars are equipped with three or five round loading hatches and a pair of gravity outlets for commodity off-loading. Compared with earlier 2-bay covered hoppers, these cars are distinctive. Notably, an overhanging arched roof, heavy top reinforcement stiffener, and folded jack pads at the bolster are spotting features for the Trinity 3281. This design has proven to be popular with shippers and railroads alike. The HO scale freight car features an injection-molded body, applied wire grab irons, photo-etched walkways and working shelf-type knuckle couplers without trip pins for scale appearance. Other details include roadnumbers printed on the truck sideframes, coupler cut levers, NMRA compliant car weight, trucks with spinning bearing caps, multiple roadnumbers per scheme and graffiti on select roadnumbers.
Straight-Edged Paint Out Blanks
Decal set with a variety of shapes and sizes of blank paint patches in 5 colors - light gray, oxide red, mineral red, boxcar red, and black.
HO MLW M420 A/B Set - DC/DCC Ready - British Columbia (Two-Tone Stripe) #641, 681
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
Bi-Level Auto Racks - Providence & Worcester #104306
All are Ready-to-Run.
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene-
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage.
HO NSC 60ft Ingot Flat Car - HPJX National Steel Car
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
HO 53ft GSC Flatcar - Delaware & Hudson #16507
FEATURES:
- One-time run of these car numbers, limited quantity available, order now!
- Now with die cast metal body for excellent performance empty or loaded
- Prototypes in service from 1950s to early 2000s - some in work train service today
- Used to carry all kinds of cargo including machinery, lumber, steel shapes, rail and various building materials
- Fully assembled with finely detailed body and deck
- Correct 33 inch RP-25 metal wheelsets
- Proto MA(TM) metal knuckle couplers
HO 40Ft Hi-Cube Dry Containers - Hyundai (3pk)
3 pack road numbers include : HDMU 665868/666500/668890
Body: Type A
Door: Type B
Latch: Type A
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
HO GE C30-7 - DCC & Sound - Conrail #6600
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
Double Lamp Post Street Lights - 3 units
Use to light street corners, sidewalks, parks, light depots, rail yards, alley ways, sidings, parking lots and more. 20mA/set. RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 0.264 in w x 1.5 in h (6.7 mm w x 38.1 mm h)
P114 Power Supply for Power Cab
For (#524-25; Sold Separately)
N Scale 48ft Rib-Side Container - APC #482013
These 48ft rib-side containers are aluminum with red vertical band and large Red Eagle logo on both sides. At 48ft in length, these containers are commonly seen filling the space in the bottom position of intermodal well-cars, with equal-length or longer containers above them. Now branded American President Lines, APL operates container ships, and intermodal rail and truck services around the world.
1:87 Greyhound Canada Tribute Set (5 Different Schemes)
LIMITED EDITION!!
HO EMD SW900 - LokSound 5 Sound & DCC - Southern Pacific #2278
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- ESU LokSound 5 sound for DCC and DC layouts
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
Evergreen Scale Models 9904 - .010in Yellow Transparent Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
HO HH600/660 - DCC & Sound - RAILCO #770
Features:
Early Blunt truck with separate brake cylinders, molded coil spring detail (optional) and metal truck chains
Separately-applied metal grab irons and lift rings
Separately-applied fine scale handrails and stanchions, coupler cut lever and piping
Directional lighting with golden-white LEDs
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
NMRA 8-pin plug for DCC
Sound Features for Gold Series:
[DCC Operation]
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided for true realism.
HO PS-2-4427 High Side Covered Hopper - Milwaukee Delivery 3-1967 #97950
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36in #8243; Wheels
Milwaukee Road MILW Delivery 3-1967 wears the classic yellow and black graphics as applied to this 300-car order from Pullman-Standard in 1967. Tangents previous run from 2018 featured Milwaukees 1968 order of cars with gravity-pneumatic outlet gates. We have carefully replicated the lettering on every panel, bay and center sill from bold MILWAUKEE ROAD to the tiniest PS lot 9174 stencil number. All of the lettering is present and accurate. These cars feature Miner gravity gates and a PS ribbed-style roof hatch. The model also features 100-ton Barber S-2 trucks with rotating Timken caps. Each SKU number varies with CAPY, liner stencil and related Pullan date information. We hear you Milwaukee Road modelers, and your continued requests for more MILW Tangent covered hoppers in our correct shade of Federal Yellow!
River City Textiles - 12-7/8 x 2-3/8 x 11-1/8 inches - 32.1 x 5.9 x 27.8cm Kit
Finally! There is a quick, affordable way to add scenery anywhere space is limited - without the added time and trouble of kitbashing!
Great for modules and shelf-type layouts, the model also includes a rooftop water tank, elevator headhouse and decals for several different business names. The loading dock provides plenty of opportunities for realistic freight operations.
Brass Strip - 12inch x 2 inch x .064inch
Length: 12inch
Width: 2 inch
Thickness:0.064inch
Styrene Sidewalk Sheet - 1/4in x 1/4in Opaque White Polystyrene Sidewalk (1 Sheet)
.016in (.40mm) GROOVE SPACING.
.040in THICK.
6in x 12in SHEET
N Scale Andrews Trucks with short ext. couplers (1pair)
HO Delivery G43A 2-1968 Gondola - Penn Central #576041
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inchh Wheels
PC -Delivery G43A 2-1968- in the original Penn Central green paint scheme, and a PC version we have not yet offered! These gorgeous models have 2 placards in place for the PC reporting marks, road numbers, and ACI label on the left side of the car. On the right side is an additional placard that includes a PC logo and Penn Central lettering. These placards are utilized on this class of PC car since these cars have side corrugations on each panel, where they knew that putting paint on the corrugations would not last very long! These cars have corrugated ends, and the Tangent replica includes oxide red car interiors ? on the interior walls and ends ? like the prototype. We even duplicated the slight green overspray on the inside end corners! The 100-Ton trucks feature accurate rotating -Timken- caps.
NYC Cab Signal Box - Unpainted
Commonly used on passenger service RS-3s.
HO Feed & Seed Elevator Detail Set
(Unpainted Metal Castings)
HO Scale G2 SD90MAC Diesel - DCC & Sound - Indiana Railroad #9025
Detailed Information
INRD FEATURES:
Former CEFX units; major spotting featured remain
#9025 features special -warbonnet- 25th Anniversary paint
EOTD above left rear of fuel tank
Indiana Railroad has 15 SD90MACs on long term lease from CIT group. 4 of the 10 units sent to NS from CIT group came from INRD. Currently the fleet wears the attractive red & white scheme applied to most Indiana Railroad units, while #9025 wears a special -25th Anniversary- paint.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
9ml pan (D) - Ultramarine Blue Shade
Each PanPastel Color is loaded with the highest quality artists pigments; and is made using a unique manufacturing process requiring minimal binder, resulting in rich, ultra soft and low dust colors. PanPastel Colors can be mixed for an infinite palette of colors.
Each pan contains 9ml (0.30 fl oz) of color. 40percent more than the average pastel stick, and yielding approx. 4-5 times more coverage.
HO Greenbrier 7550 cf 60' Plate F Boxcar - LRS #141065
Aurora Miniatures North America Inc. is proud to offer the HO Greenbrier 7550 cf 60? Plate F Boxcar, in multiple road name-specific and era-specific detail variations. The replica of this iconic 21st century 60? boxcar shares the same epic design philosophy and attention to detail as our previously-released 50? version. No other model train manufacturer?s previous attempts come close to matching the Aurora treatment! DO NOT SETTLE FOR SECOND BEST? AURORA MINIATURES IS #1!
Model Features:
The ultimate, end-all HO scale model of this popular boxcar!
Based on multiple variations of the 60? Plate F boxcars built by The Greenbrier Companies from 2003 to present day.
All-new model, meticulously designed using various prototype resources with unrivalled accuracy and attention to detail.
Highly detailed, injection-moulded plastic body with accurately rendered detail variations.
Separately applied ladders, handrails, grab irons, coupler cut levers and air hoses.
Fully replicated underbody details: control valve, two-sided release road with mounts, empty/load sensor, diagonally mounted air reservoir, brake cylinder, low-mounted brake rods, full piping details connecting all components.
Separately applied vertical wheel handbrake with release lever, handbrake chain and bell crank on B-end.
Near-scale size draft gear box with side key detail and cushion detail.
Aurora-designed 100-ton roller-bearing freight car truck system with sideframe variations, fully replicated bolster & center plate detail, side bearing and brake beams.
NMRA RP-25, Code 110, machined metal 36? wheelsets featuring rotating bearing caps, prototypical wheel contour and axle tapering.
Rotating ?Timken? or ?Brenco? bearing caps, per prototype.
Aurora Janney scale head couplers installed.
Precision painting and lettering.
Multiple road numbers offered for each paint scheme.
HO Industrial Tanks Detail Set - Kit
FEATURES:
- Great detail for industrial complexes, railroad shops and more
- Two large-capacity horizontal storage tanks with concrete supports
- Large and small elevated vertical steel tanks
- Large and small vertical steel tanks without bases
- Easy-to-build plastic kit
- Molded in appropriate base color
N Budd RDC-1 (Ph 1) - DC/DCC/Sound - Painted, Unlettered
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height
HO 70 Ton 13 Panel 3-Bay Hopper Car - Pennsylvania (H37B w/ Crown Trucks) #272209
Ready to Run.
Features:
Crisp details and sharp painting and printing,
metal wheels and knuckle couplers
1st time offered with the correct Trucks
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - JAMX #2007
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO RTR 68Ft Railgon Gondola - Chicago Heights Terminal Transfer #287095
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO 59Ft Cylindrical Hopper - RTR - Canadian National #376510
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
One time run of these roadnumbers, order now - limited quantity available
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
Round Hay Bale - 20 pcs.
Bring rural areas to life in minutes with this set of 20 Round Hay Bales! Fully assembled and ready to add to scenes new or old, each features a realistic color and texture. Perfect for detailing fields and farm scenes, they also make great loads for boxcars, and flatbed wagons or trucks.
HO Scale 40Ft Power Poles - 6pkg
Poles only-includes 6 - stained and weathered
Styrene Sidewalk Sheet - 1/8in x 1/8in Opaque White Polystyrene Sidewalk (1 Sheet)
011in (.28mm) GROOVE SPACING.
.040in THICK.
6in x 12in SHEET
HO Hyundai 48ft Exterior Post - BNSF/HUB Group #684226
PROTOTYPE TYPE:
48ft Exterior Post containers were introduced in 1986 and were a common site on nearly all double stack container trains of the later 80s, 90s, and 2000s. These containers were used for domestic freight service and were purchased by numerous railroads and freight operators in large numbers. These containers were a unique design in which the front and side container panels were supported by aluminum channel posts mounted outside of the container box to provide additional capacity space for larger pallet stacks within the container interior. The posts are a simple spotting feature for these styles of containers. Hyundai was one of a handful of manufacturers of exterior post containers, and while nearly-identical in design to one of their competitors, the additional drainage channel on the top of the container at the head end, and full-height end corner posts differentiate this container from its competitors design. Some of these containers served secondary lives for more than one operator, leading to some interesting graphic combinations over their lifespans. Changes to over-the-road length allowances for 53ft containers and trailers brought about the eventual demise of the 48ft container and a majority of them were withdrawn from service during the mid-2000s and beyond, though limited numbers still remain in service today.
FEATURES:
Hyundai Roof Configuration Version:
A unique feature of the Hyundai design was the additional water drainage channel near the front end of the container and the forward vertical framing members that extended the full height of the container. We have modeled the detail that differentiates this container from those of other manufacturers of 48ft exterior post containers.
Sharp And Accurate Paint And Lettering:
Classonemodelworks.com provides accurate paint and lettering taken from photographs of the prototype, and numbering that matches the class numbers for each operator or railroad. Our containers come with the exterior posts already painted to match the aluminum color of the prototype containers and galvanized coloring for the upper and lower structural channels.
Accurately Dimensioned:
These containers have been accurately reproduced from hand-measured field dimensions of the actual containers, right down to every visible detail. Classonemodelorks.com stands for accuracy and we strive to provide that with every model we produce.
Accurate scale Door latching Details:
Classonemodelworks.com believes in providing models that accurately depict the prototype equipment. Keeping that as our core, we are proud to provide highly-detailed cast door locking bars, latching mechanisms, door bumpers and angled bar lifter.
HO 100-Ton Open Hopper - BNSF #616418
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
Weathering Pencils - Streaking Dirt (5/Box)
Weathering pencils are water-based pencils with 17cm semi-grease paint specially for use in modeling. Specially formulated with the most suitable basic colors to achieve all the effects in a very simple way! They are very easy to control, clean, and of course they are not toxic. It is an ideal tool both for people who want to introduce themselves in modeling and for more advanced modelers who can discover their properties in different effects.
We recommend using them on a matt surface to achieve optimal results, but thanks to their semi-fat tip, they can be used on other finishes!
HO 50ft Evans Double-Door Plug Boxcar - Quinault Pacific/USLX #10469
MODEL FEATURES
-Fully assembled and ready for your layout
-Separately applied end ladders, brake wheel and underbody details
-Weighted for optimum performance
-Machined RP25 profile 33in metal wheels
-McHenry scale knuckle spring couplers installed
HO Gunderson Multi-Max Auto Rack - BNSF (Black Wedge) #694664
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
Brown Unitrack Unijoiner - pkg(20)
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #00044
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO EMD SW9 - DC/ Silent - Erie Lackawanna (EL Gray & Maroon) #437
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Erie Lackawanna:
1970 Repaint
Optional -beehive- style spark arrestors with short stacks in polybag
Deck mounted side handrails
Carbody style handrails
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO GE Dash 9-44CW - DCC & Sound - Union Pacific UP #9647
UP FEATURES:
High mounted number boards
K3 horn
Front ditch lights
Standard brass bell
SP body details
After the 1996 acquisition of the Southern Pacific, UP inherited Dash 9-44CW locomotives from the SP. As it was time for major maintenance, they
were eventually repainted into their new owners colors.
ROAD NUMBER SPECIFIC FEATURES:
#9578 Ex-SP 8114, Yellow sill, UP lettering w/o Flag, UP style plow, Sinclair antennas
#9599 Ex-SP 8135, Red sill, Sinclair antennas, SP style plow
#9647 Ex-SP 8173, Yellow sill, Sinclair antennas, small GPS dome, SP style plow
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Opaque White Polystyrene V-Groove Siding Sheet (12in x24in) .030inch Groove Spacing
1 Sheet per pack
0.020Inch thick
Groove spacing is center to center of grooves.
Product Information
Used on freight and passenger cars; as well as railroad, commercial and residential buildings. Many 19th- and early 20th-century structures had panels of V-Groove siding applied in horizontal, vertical and diagonal patterns, or in combination with clapboard and novelty siding for decorative effects. These opaque white, sheets are pre-scribed to match different widths of lumber.
Tru Color Paint - Acrylic - Clear Gloss - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
G2 SD70M-2 - DCC & Sound - FEC #107
Genisis 2.0 Features:
See-through pilot steps, Lit Marker Lights (CN)
LIT numberboards & ground lights
Detailed Information
FEC NOTES:
Florida East Coast received a group of 4 SD70M-2s in 2008, painted in the RailAmerica scheme. The units were often found on mainline trains with GP40-2s, SD40-2s and the roads other SD70M-2s.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Etched see-through steps
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
HO New Look Bus - Gray Coach Lines (Ontario) - Airport via Islington Term - Deluxe #1414
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
HO 40Ft PS-1 Boxcar - Port Huron & Detroit #1070
Date: BK 7-62
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
HO Bi-Level Auto Rack - Southern Rack/TTX Flat Car #942202
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Penn Central Rack, Trailer Train Flatcar (TTBX) #961930
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
N Scale Extension Kit for Grain Bins
Kit makes 3 bands (11ft tall total) to add to the Rix Corrugated Grain Bin.
Dimensions are 11 scale feet tall by 24 foot diameter.
HO Storefront Signs - Industrial & Manufacturing
Blair Line HO Scale Business and Storefront signs are printed in appropriate colors on thin plastic for easy assembly or placement with plastic cement or CA glue. Colorful signs are based on real signs and many include two identical signs for back-to-back, two-sided mounting. Steam and diesel-era signs make great roadside, street-side, trackside and structure details.
N Scale #6 Electric Remote Turnout - Right Hand
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated.
Feeder Tracks, Double Crossover and all turnouts are factory-wired for plug-and-play operation.
HO F30A 50Ft Flat Car w/Sleeper Van - Conrail (CR MOW) #62089
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
Rapidos F30 Camp Cars Feature
All-new camp trailer loads in four styles
End railings and platforms
Photetched details
Multiple car numbers per scheme
Kit - Pier 12-5/8 x 5-3/4 x 1-1/2 inches - Crane 4 x 4 x 9-1/8 inches
Molded in 3 Colors & Clear Plastic
4 Deck Sections for Easy Customizing:
2 Decks w/Craneway & Code 83 Rail Slots (Rail Sold Separately)
2 Plain Decks
Crane Features Positionable Cab, Boom & Hook
Additional Deck Section to Expand #933-3154 (Sold Separately)
HO SD70 - DCC & Sound - Illinois Central #1007
Detailed Information
IC FEATURES:
As-delivered IC scheme in 1995.
P5 horn
Spare knuckle brackets on rear pilot
Spare knuckle basket on walkway
Sinclair and can-type antennas
Cab Vent
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Juneco Scale Models Stack of 3 Sacks (6/pkg)
Talus - Fine Natural (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings and or road cuts. Intermix grades and blend shades for the most realism. Color Natural Talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle Talus and secure with Scenic Cement (#191).
Particle size- Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
HO Diesel Locomotive RS3 X Air Filters - Plastic (8pk)
HO Code 83 Rail - Flex Track North American-Style - Concrete Ties (5pcs)
Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of the rail fixings.
Technical Specification:
Length: 3 feet (36 inches) each
SL-110 Conducting Rail Joiners: Nickel Silver for PECO Code 83 track
SL-111 Insulated Rail Joiners for PECO Code 83 track
SL-14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork
HO Code 83 Flex-Track - Non-Weathered (6pcs) (18ft)
Flex-Track features scale size ties, tie plates and spikes, irregular tie spacing, natural brown tie color and nickel-silver rail. 6pcs, 3ft lengths.
ProtoThrottle - Pink - OVR EXCLUSIVE!!
LIMITED EDITION!!
This beautiful pink color was produced specifically for Otter Valley Railroad!
Get yours while quantities last!
The ProtoThrottle Realistic Control Stand Throttle mimics a standard EMD control stand including full detent throttle and reverser handles, a spring-loaded horn handle, a push-on/push-off bell button, and fully programmable front and rear headlights with a setting for ditch lights. In addition, the ProtoThrottle comes with a robust faceplate machined from aluminum, including prototype bezels, and anodized to give the look and feel of a real control stand.
FEATURES:
- Fully wireless throttle
- Eight detent throttle handle
- Reverser handle with centered position
- Brake handle and spring-loaded horn handle
- Push-on/push-off bell button
- Front and rear headlight knobs with dim and ditch light settings
- Auxiliary buttons that can be assigned to any DCC function
- Works with any standard DCC decoder
- Interfaces to any DCC system (with separate receiver specific to your DCC system)
- Highly configurable to suit your operating style
- Designed and built in the USA!
- Securely store your throttle with the ProtoThrottle Pocket (sold separately)
- EMD-style knob and handle upgrades available from Scottys Model Shop
Specifications:
- Approximate Dimensions: 7.6(L) x 3.2(W) x 3.0(H) inches
- Approximate Weight: 15oz
- Powered by 2x AA batteries (not included)
HO Trinity 3230 Covered Hopper - Cargill Salt (CLSX) #3211
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
The Trinity 3230 Pressure Differential covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
Tru Color Paint 029 - Acrylic -D&H Gray - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO GMD SD40-2f - DCC Ready - Canadian Pacific: Beaver Logo #9022
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
Juneco Scale Models Back Up Light - MLW Pyle Double Horizontal w/jewels, plastic (2/pkg)
Evergreen Scale Models 4083 .083in Opaque White polystyrene Novelty Siding (1Sheet)
HO Mid-Century Modern Home - Kit
Product Information
Add a stylish and modern home to your Ho suburbs with the Mid-Century Modern Home kit from Cornerstone! Based on prototypes built from the late 1940s to 1960s and still enjoyed by contemporary homeowners, authentic details include:
-Authentic brick and concrete block construction w/large windows
-Attached carport w/rear toolshed
-Roof-mounted skylight
-Modern air conditioner, kettle-style grill, nonworking globe walkway lights, mailbox, gas and electric meters and more all included!
-Printed interior sheet included
-Molded in gray, white, tan and clear plastic
HO SD60M Wide Cab Diesel - DCC & Sound - CSX #8783
Expected in May 2022
Detailed Information
CSX FEATURES:
-YN3- Scheme
Ex-CR
Small EMD plow
Front ditch lights
CSX-style GPS dome
K-5 horn
After the CR split in 1999, CSX acquired 30 ex-CR SD60Ms. Around 2007, they were repainted into CSXs more simplified -YN3- scheme while retaining most of the CR-specific details. They operated until 2017 when their lease expired and they were sold off to a leasing company.
LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully-assembled and ready-to-run
Replacement parts available
Minimum radius: 18inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - RSGX #4336
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Damp Earth Satin Wash Enamel Paint - 35ml Bottle
Button Board for Switch8-Mk2
Add push button control to Switch-Mk2
Up to 16 push buttons can be added to Switch8-Mk2
Accommodates N.O. Pushbuttons or toggle switches
Simple hook up, 3 wires to Switch8-Mk2
HO EMD GP40 - DCC Ready - Canadian National (Large Noodle) #4014
1967+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO Duplex Sleeper - Amtrak - Phase I #2402
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
N Scale GATC 2600 Airslide Hopper - GACX #42385
MODEL FEATURES:
- Detailed underbody including outlet piping
- Rectangular or oval shaker brackets
- Gravity or gravity-pneumatic outlets
- Machined metal wheels
- Factory installed wire grab irons and brake piping
- Separately applied round roof hatches and brake wheel
- Roller bearing or Bettendorf trucks
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed
- Highly detailed, injection molded body
- Weighted for trouble-free operation
- Body mounted McHenry operating scale knuckle couplers
- Clear plastic jewel box for convenient storage
- Operates on all popular brands of track
- Minimum radius: 9-3/4 inches
HO GP9RM - DCC Ready - Canadian National (Large Noodle) #7006
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
Metal Burnishing Fluid - 100mL
A new faster formula (works in seconds), and at a more competitive price. This has extensively tested and formulated, and improved this product, at AK-Interactive. With their Metal Burnishing fluid, you can naturally weather and rust white metal tracks. Just dip the tracks in the liquid for a few seconds and the metal will begin to appear dark and rusty very quickly, easily and effortlessly. You can vary the effect using different dilutions and varying lengths of soak. Using less product, you can achieve even better results than with their previous formula.
HO 19,600 Gallon Tank Car - ADM (Molecule Logo) #19467
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Built: NEW 3-96
HO MLW M630 - DCC & Sound - BC Rail #722
R-W-B Hockey Stick, recessed nose ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound V5 decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
HO AAR 1944 Boxcar - Illinois Terminal #6041
Expand HO freight service with these colorful Walthers Mainline models based on the popular American Association of Railroads (AAR) standard boxcar design from 1944. Used for all types of general loading, the durable steel cars were still going strong into the 1980s.
Features of these models include:
-Limited Edition - one time run of these road numbers
-4-4 Improved Dreadnaught ends
-Murphy panel roof
-See-through Apex steel running board
-6ft Youngstown doors
-10ft 6in Interior height
-AAR (Tab) side sills
-Correct 33in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO RTR 53Ft Platewall RoadRailer Trailer - Conrail/ Norfolk Southern (Triple Crown) #461393
(white, Large Logo, NS-CR Logos)
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
Peco PSG-76 - Self Adhesive Autumn Grass Tufts - 10mm (100pkg)
These handy packs contain 100 self adhesive ready made tufts, to stick down wherever required on your layout or diorama.
HO Trinity 3230 Covered Hopper - CIT Group (CBFX) #440507
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
The Trinity 3230 Pressure Differential covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
HO Duplex Sleeper - VIA Rail Canada #1118 / Egerton
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO Dash 8-40CM - DCC Ready - BC Rail: R/W/B w/ Frame Stripe #4626
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (6x8) .066In x .090In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 6 X 8 LUMBER SIZE IN HO SCALE
HO Horizon Dinette - Wide - Amtrak (Phase 3) #53504
Details & Specs
Rapido HO scale Horizon cars feature:
- Coach, Dinette and Club-Dinette cars available
- Full underbody detail
- GSI G70 trucks with metal wheelsets
- Accurate painting and lettering
- Constant interior lighting in DC and DCC
- Metal side grab irons
- Full interior detail
Alcohol, Tobacco and Chewing Gum 1940s and 1950s
Contains 40 full color posters and signs. HO Scale. Unique weathering and application instructions included in all poster/sign packs.
HO 57Ft Mechanical Reefer - Union Pacific (American Refrigerator Transit ARMN) #756096
Product Information
Move all kinds of perishable products on your HO railroad with WalthersMainline 57Ft Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s. Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including:
One time run of these roadnumbers, order now - limited quantity available
Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
Keystone or Hydra-Cushion underframe detail as appropriate
Short ladders and low hand brakes
9Ft Youngstown plug door with separate latch bars
Authentic Stanray peaked, ribbed roof with capped exhaust stack
Detailed underbody with brake gear and fuel tanks
70-ton roller bearing trucks
Correct 33Inch RP-25 turned-metal wheelsets
Proto MAX metal knuckle couplers
HO SP C-40-3 Steel Cupola Caboose - Southern Pacific (Delivery Scheme) #1160
1940+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
HO Single Comet Commuter Coach - Montreal AMT (Late Lake Scheme) #724
The Rapido Trains HO scale Comet Cars features:
Designed from field measurements as well as original blueprints and documents.
Full interior detail including individual seats, and unparalleled underbody detail incl. all pipes and boxes
Extremely free-rolling inside-bearing trucks with metal wheelsets
Tinted windows and accurate painting and lettering
All-wheel electrical pickup and advanced circuitry for flicker-free lighting on both DC and DCC layouts
Coaches feature controllable interior and end marker lights using the included magnetic wand
Cab Coach lighting controlled using the magnetic wand on both DC and DCC layouts
HO SD60E - DCC & Sound - Norfolk Southern NS #9-1-1
Detailed Information
NS 9-1-1 FEATURES:
3900 gallon EMD fuel tank
Cab mounted PTC antenna array
NS designed snow plow
Horse head style blower duct kick plate
Different cab panel louver arrangement per prototype
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
LED lighting including:
Headlights
Illuminated deck mounted ditchlights front and rear
Numberboards
Ground lights above front trucks
Long hood mounted Nathan 5-chime air horn
Sunshades
Rounded or rectangular cab windows per prototype
Flexible rubber multiple unit (MU) hoses with silver glad hands
Flexible rubber front and rear trainline air hose with silver glad hands
Step wells feature seperately applied individual see through photo-etch steps
Coupler cut levers with loops
Anticlimbers
Safety tread on the walkways
Anti-glare panel painted on the nose
Factory applied photo-etch windshield wipers & lift rings
See through and tinted cab windows
Detailed and painted cab interior with control stand, display screens, detailed crew seats
See-through radiator fans
Factory installed wire grab irons
Fine-scale handrails for scale appearance
Underframe mounted E-bell
HT-C trucks with Timken bearings
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
McHenry scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Recommended radius: 22inch
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Frame mounted 1inch high fidelity premium speaker
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Scale Automobile Service Ramp Kit
This kit will equip your service station for business. Includes metal and laser cut detail parts - shelf, work desk, air compressor, tool chest, toolbox, welder, two floor jacks, one bottle jack, and two small cans.
HO Frame Mount Bells - pkg(2)
Product Information
For all types of units.
HO RTR 52Ft Mill Gondola - Washington Central #30060
Detailed Information
MODEL FEATURES:
Body-mounted McHenry operating scale knuckle couplers
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Razor sharp painting and printing
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO GMD SD40-2 - DCC & Sound - CP Rail: As Delivered #5779
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO Christmas Figures (6pkg)
Bring new life to your layout with ready-to-use Walthers SceneMaster figure sets!
Each figure is carefully sculpted with realistic detail and hand-painted.
HO PROCOR 20,000 Gallon General Purpose Tank Car - CN - Company Service / Era: 1985+ - #80351
The Rapido Trains HO scale Procor GP20 Tank Car features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Photo-etched metal walkways
Detailed vent stacks, loading hatches, air tanks and braking equipment
Metal knuckle couplers
Early style features 70-ton trucks with 33in wheels and an exposed drain valve
Late style features 100-ton trucks with 36in wheels and a reinforced drain valve housing
Opaque White Polystyrene V-Groove Siding Sheet (12in x24in) .100inch Groove Spacing
1 Sheet per pack
0.020Inch thick
Groove spacing is center to center of grooves.
Product Information
Used on freight and passenger cars; as well as railroad, commercial and residential buildings. Many 19th- and early 20th-century structures had panels of V-Groove siding applied in horizontal, vertical and diagonal patterns, or in combination with clapboard and novelty siding for decorative effects. These opaque white, sheets are pre-scribed to match different widths of lumber.
Gravel - Gray Coarse
Gravel is sized to model gravel roads more realistically. Use Accent for shoulders and to model bare spots on roads.
Gravel- 10.8 in3
Accent Powder- 1.8 in3
Coverage: Models a gravel road 14 feet x 2 inches
HO 40ft Boxcar - New York Central Pacemaker #175073
Features:
-Ready to Run
-Crisp details
-Sharp painting and printing
-Metal wheels
-Kadee-compatible Knuckle couplers
HO RTR ACF 4650 3-Bay Hopper - SOO Line #74193
Date: BLT 11-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO 35Ft Fruehauf Integral-Post Volume Van - PRR: 1950s #35 C 525
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
HO Wood Grade Crossing (2/pkg)
Realistic looking and ready to place.
Easy to install!
Injection molded plastic wood planks are notched to fit over rail spikes.
Includes pre-cut shims to correspond to proper code.
Works with any track code.
HO Wrapped Lumber Load for 72ft Centerbeam Flatcar - Bennett Lumber
(Blue, red)
Put your railroad to work moving these Walthers SceneMaster Wrapped Lumber Loads from sawmills to local building suppliers. Made especially for the HO Walthers Mainline 72ft Centerbeam Flatcars (#910-4800 series, each sold separately) and adaptable to most cars with a similar interior length, each is pre-painted and lettered in authentic schemes, and snaps easily onto the car to add realistic detail in a matter of minutes!
Kadee 1035 HO Scale Starter Pack
This package of Kadee products is designed to assist the beginning model railroader in learning the basic modeling skills of proper coupler mounting and use of the Kadee Magne-Matic coupler system.
The following items are a basic selection of assorted couplers and related products that should be enough for the beginner to acquire the knowledge needed for proper coupler selection and mounting.
Contains: HO-Scale Conversion list, Coupler Primer, #1035 Instructions, Product Instructions & full size packages of products listed below.
Couplers - Metal
NO.5 Medium Centerset - Metal - 2 Pair
142 Whisker Medium Overset - Metal - 2 Pair
143 Whisker Short Centerset - Metal - 2 Pair
146 Whisker Long Centerset - Metal - 2 Pair
147 Whisker Medium Underset - Metal - 2 Pair
148 Whisker Medium Centerset - Metal - 2 Pair
158 Whisker "Scale" Medium Centerset - Metal - 2 Pair
Gearboxes and Adaptors
212 Talgo Truck Adaptors - 2dz.
252 Whisker Coupler - Small Snap-Together Gearboxes & lids (30-Series Equivalent) - 10 Pair
262 Whisker Coupler - Narrow Snap-Together Gearboxes & Lids - 10 Pair
Screws, Washers & Shims
208 .015in Red Fiber Washer - 4dz.
209 .010in Gray Fiber Washer - 4dz.
211 .010in & .015in Shims - 20 Each
256 Plastic 2-56 x 1/2in Screws - 1dz.
Uncouplers
321 Code 100 Between-The-Rails - One Pair
322 Code 83 Between-The-Rails - One Pair
Tools
206 Coupler Height Gauge - One Each
230 Talgo Truck Adaptor Insertion Pic - One Each
231 Greas-em - One Each
334 Uncoupler Gluing Jig - One Each
241 Dual Tool - One Each
HO Greenville 86ft Double Plug Door Box Car - Erie Lackawanna #92082
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: August 2021
Erie Lackawanna (EL) -Original 1965- represents the first of four Erie Lackawanna orders for Greenville 86ft Double-Door box cars. Delivered in 1965, this group of 100 cars featured Center-of-Car Cushioning with truck mounted brakes. This car includes the large spelled out Erie Lackawanna on the left side of the car, and a large gold -Cushioned Car- and large white Erie Lackawanna diamond logo at the right side of the car. We sweat the little details too – our model is equipped with an accurate Ajax hand brake, Apex crossover platforms and 70T trucks with 33inch wheels and rotating Timken roller bearing caps. Remember those truck mounted brakes mentioned earlier? Yes, our trucks have the correct truck mounted brake beam to match that important detail. Finally, this Erie Lackawanna offering was part of the Fords Chicago Stamping Pool, resulting in an accurate Chicago Heights, Illinois return route stencil. Our EL masterpieces are available in six different numbers. EL Fans rejoice!
Spray Can - Gun Gray (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 1937 AAR 40Ft Boxcar - CP5/5 Ends - Canadian Pacific (Spans the World) #227117
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO EMD GP40 - DCC & Sound - Canadian National (Stripes) #4013
1978+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
F30A 50Ft Flat Car: Lehigh Valley #10042
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
Woodland Scenics Static Grass 614 2 mm Medium Green
Foam & Snow Texture Effect - Bottle (32mL)
The placement of our model in a diorama or vignette gives it a reality, a background and a history, an added dimension and a reason for the humidity, the traces of mud, of the dry sand of the desert or the dark earth of the wooded landscapes of central Europe. The range of Diorama Effects offers the modeler everything needed for the reproduction of a terrain, with effects of sandy and dusty roads, or of snow, mud and water, all of which add to the realism of the setting and relate the model to its environment.
SAFETY: Diorama Effects is not flammable, and does not contain solvents.
APPLICATIONS: Foam is a heavy, extra opaque white acrylic, which can be applied directly from the bottle, has been formulated for simulating raised crests on waves. The product can be sculpted with a palette knife or dry-brushed to form whirls & wakes on the surface of tinted Water gels. Dries quickly to a hard, white surface.
HO 66ft Bulkhead Flatcar - British Columbia (Dark Green) #866568
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
All Scale DC Converter - For Electrical Accessories
Connects to the AC 16/17V accessory output on your power pack. Only one converter is needed to connect as many turnout control switches and crossing gates as your layout requires.
HO 89Ft Bethlehem Flush-Deck Flatcar - Santa Fe #296533
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers
Structure Projects for Your Model Railroad
Realistic structures are an essential component of any successful model railroad layout, so hobbyists will appreciate this collection that guides them step by step through various structure modeling processes. They’ll learn to complete simple and complex scratchbuilding projects as well as kitbashing, detailing, and painting, discovering many techniques and materials they can apply to their own projects along the way.
Author: From Model Railroader
Softcover; 8 1/4 x 10 3/4; 88 pages; 150 color photos
HO RTR ACF 2970 Covered Hopper - Grand Trunk and Western #315059
Detailed Information
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons and stirrup steps
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple road numbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
HO 40ft Corrugated LC Container - OCL #1 (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered
F30A 50Ft Flat Car: PRR 1960s Era #475179
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
HO Northern Light & Power Powerhouse - Kit
Product Information
Generate revenue for your steam or diesel-era railroad with the Walthers Cornerstone Northern Light and Power powerhouse. This detailed, easy-to-build model is similar to power generating stations operated by utility companies, private industries and institutions, as well as streetcar or interurban lines. The kit features a brick main building, large smokestack, coal dump pit, separate doors, roof with vent details, tall windows and clear window glazing. Northern Light and Power also includes decal signs and complete instructions. Northern Light and Power is just one of a wide variety of Cornerstone HO Scale industrial buildings.
Easy-to-build plastic kit
Use as a stand-alone utility or as part of a larger industrial complex
Fits 1900 and later modeling eras
Tall brick smokestack
Molded in appropriate colors
As shown Northern Light and Power measures: 12-3/4 x 6-1/2 x 7inch (31.8 x 16.2 x 17.5cm)
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC (6 pkg) #3
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Includes Road Numbers:
200095
200100
200115
200132
200140
200149
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
Kit - 10 x 10 x 6 inches - 25 x 25 x 15cm
Performing everything from painting to complete rebuilds, Allied Rail Rebuilders captures the realism in a size that works on most layouts. Lots of details are included, such as an EMD 567 prime mover, separate roof vents, interior trusses, doors and windows. It can also be used for other types of heavy industry.
HO GE C30-7 - DCC & Sound - Norfolk Southern #8014
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
Fir 4 - 6inch 10 - 15cm Tall pkg(13
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors.
HO G2 SD80MAC - DCC Ready - Ex-CR Norfolk Southern #7200
Detailed Information
NS FEATURES:
Former CR units
Faded paint effect and cab number patching per road number
Removed red marker lights
Correct horn per road number
After the 1999 split of CR, a batch of SD80MACs went to NS. They were hastily patched into new NS numbers while keeping the original CR scheme for a while.
ROAD NUMBER SPECIFIC FEATURES:
#7200
Black nose anti-glare patch
5-chime horn
white patch with black numbers.
#7212
Faded to white anti-glare nose patch
Leslie 3-chime horn
Black patch with white numbers.
#7215
Faded to white anti-glare nose patch
Leslie 3-chime horn
White patch with black numbers.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO EMD SD9 - DC/Silent - Burlington Northern #6232
Burlington Northern
- Former CBQ units (Phase IV, first time for a plastic model!)
- Correct 5-step, BN walkway
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Length - 3/8 inches - colour -Black
Athearn Blue Box cars, coupler box, locomotives
HO RTR SD39 - DCC Ready - Copper Basin Railway #304
CBRY FEATURES:
In the late 1980s, Copper Basin RY picked up some surplus Ex-SP SD39s for their copper concentrate trains in AZ. When purchased, they were kept pretty close to the old SP-specs other than the removal of some of the oscillating lights and the bell being moved to the long hood. They were repainted into this unique copper and grey paint scheme. Our models depict these details such as: front and rear large plows, rear brake wheel, P-3 Horns, FARR grilles, removed red warning lights, and road number-specific trucks and headlight placement.
ROAD NUMBER SPECIFIC FEATURES:
#302
Ex-SP 5321
high-mounted brake cylinder trucks
relocated headlight
unique front and rear stripe pattern, P-3 horn with mis-matched bells
removed red warning lights
modified L-window cab
whip antennas
#303
Ex-SP 5323
low-mounted brake cylinder trucks
unique front and rear stripe pattern, P-3 horn
removed red warning lights
modified L-window cab
whip antennas
white painted roof #304
#304
Ex-SP 5324
low-mounted brake cylinder trucks
unique front and rear stripe pattern, P-3 horn
removed red warning lights
modified L-window cab
whip antennas
white painted roof
SD39 SERIES LOCOMOTIVE FEATURES:
Separately applied air tanks
Coupler cut levers
Rubber MU hoses
Photo-etch stainless steel windshield wipers
Fine scale handrails
Non-sound version features 21-pin NEM DCC plug
See-through dynamic brake and radiator fans
Curved radiator fan grab iron
Exhaust stack
Frame-mounted bell (unless noted)
Detailed 4000 gallon fuel tank (unless different capacity is noted)
Flexicoil-C trucks with high or low brake cylinders (per prototype)
McHenry scale knuckle spring couplers
See-through cab windows
Bi-directional LED lighting
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Painted and printed for realistic decoration
Highly-detailed, injection molded body
Minimum radius: 18inch
Recommended radius: 22inch
1:16 ABS Stair Rail (1pc)
Use for hand rails on stairways. Precision Injection Molded in Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
Tip: ABS Stair Rails may be curved to fit circular application by softening them in warm water or heating with a hair dryer. Stairs may be modified to fit the circumference of a tank or other curved surface by cutting off the stair stringer from the side to be cemented. Tape the stair in place. Attach each stair step separately
SCALE
1:16
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
2-21/32In
HEIGHT IN MM
67.5mm
WIDTH IN INCHES
4-1/2In
WIDTH IN MM
114.3mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
24In
LENGTH IN MM
600mm
HO 59Ft Cylindrical Hopper - Toronto, Hamilton & Buffalo #1538
(black, white; Bow Tie Logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
One time run of these roadnumbers, order now - limited quantity available
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Modern Triple-Track Signal Bridge w/6 LED 3-Aspect Heads - Assembled
(8-9/16 Inches Leg Spacing)
- Triple-Track Prototype
- Durable Plastic & Brass
- Etched-Metal Handrails
- Electrical Box Detail
- Operating Signal Heads
- Completely Assembled
- Extremely Accurate Design
- 18 LED Lights!
THE PROTOTYPE:
From the introduction in the early 1990s, these modern signal bridges have sprung up by the thousands across North America. Built from specialized aluminum and stainless steel components, these giant structures are common on all current major railroads and a growing number of commuter rail lines.
Operating Requirements:
This signal bridge requires a signal control circuit to function correctly. Each of the six signal heads are wired in the common anode configuration; the RED wire is common. Consult the manual of your signal circuit (sold separately) for installation instructions in the common anode configuration.
NOTE:
The micro-LEDs in this product require NO MORE than 2.0-2.2 Volts; 25-30 Mili-Amps.
This product is NOT compatible with the common cathode system used by the Atlas Signal System.
HO EMD GP7 - DC/DCC Ready - Undecorated Dynamic - Phase III
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
UNDEC FEATURES:
Optional parts include...
Dual Leslie A-200s or single S3L horn
Winterization hatch
1200 and 1600 gallon fuel tanks
Speed recorder
Foot boards
Dual MU receptacles
-Nail-, -Firecracker-, and Sinclair -Ice Skate- antennas
In 1949 EMD unveiled the GP7, a general-purpose road-switcher that was suitable for a variety of tasks on the railroad. The GP7 went through several production variations, known as -phases- by railroad enthusiasts. -Phase II- units were typified by the addition of a box on the walkways on the firemans side, as well as the (optional) addition of dynamic brakes. This undecorated release is a good option for do-it-yourself modelers or freelancers, and comes with a selection of common, optional detail parts as well.
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO Machine Shop Doors & Windows - pkg(8)
As used on the 541-9 Pikestuff Machine Shop kit.
5 large windows. 3/4 x 1 inches.
1 small window. 13/32 x 1/2 inches
1 solid personal door. 1/2 x 1 inches
1 garage door with windows. 1-1/2 x 1-15/31 inches
Modern Highway Divider (4 - 50 Ft ) Kit
Just glue two halves together to form double sided dividers.
The Rix Modern Highway Overpass for HO scales is modeled after the bridges built today to span over railroad tracks. This style of bridge is typical of most new construction and is used all over the country. The Rix Modern Highway Overpass consist of 50 foot spans which interlock together so that any length bridge can be built.
40Ft Corrugated Container NYK Logistics 2pk
NYKU #841086(5), NYKU #844710(2)
Spoke Shave Replacement Blade
2 blades to fit the Zona Spoke Shave.
Blades are 7/8in wide x 5/8in.
HO F89-F89ft 8in TOFC Flatcar - XTTX #153135
MODEL FEATURES:
- Die-cast underframe
- Weighted for trouble free operation
- Raised and lowered hitches included
- Use for dedicated intermodal trains or mixed freight
- Detailed deck
- Wire formed brake plumbing
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Separately applied wire grab irons on and ladders
- Separately applied brake ratchet
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Machined metal wheels
- Wheels with RP25 contours operate on Code 55, 70, 75, 80, 83, and 100 rail
- Body mounted McHenry operating scale knuckle couplers
- Minimum radius: 22 inches
- Recommended radius: 24 inches +
- XTTX version: cars have 4 hitches to handle different trailer lengths. Extra raised and collapsed hitches included to model any configuration.
HO MLW M420 - DCC & Sound - British Columbia (Two-Tone Stripe) #646
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
Mitre Box & Universal Razor Saw Set - Aluminum
The Zona Aluminum Mitre Box & Universal Razor Saw Set includes a Fine-Kerf Saw with a 42 teeth per inch blade 795-35550, an Aluminum Thin-Slot Miter Box with a .014inch slots for 30, 45 and 90 degree precision cuts on the saw blades pull stroke. Saw cuts on the pull stroke, has a steel back for added stability and a hardwood handle.
HO People Sunbathing (6)
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Delaware & Hudson - Lightning Stripe #5005
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO GE C30-7 - DCC Ready - ATSF Santa Fe (Early Scheme) #8012
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
Sheriff and Drunk - 2 Unpainted Figures
HO Scale 85 ACF Dome Diner - Union Pacific 8008 (Heritage Fleet, City of Portland; yellow, gray)
In response to many requests, Walthers is pleased to announce HO models of the historic Union Pacific train honoring the late President George H. W. Bush, which will include a WalthersMainline SD70ACe 4141, and select WalthersProto cars from the Heritage Fleet. Each car comes fully assembled for operation or display, with a variety of features as noted below. Perfect for fan trips and special events behind 4141 and other UP power
First time with factory-printed UPP numbers and car names
Baggage car includes full-color Presidential Seal decal
Finished in modern-era UP excursion scheme
Factory-installed grab irons
Prototypically accurate window tinting as appropriate
Delivered new from American Car & Foundry in 1955 as 8008, this car was sold to the original Auto Train in 1972 and remained on its roster until 1981. A year later it was transferred to Kansas City Southern, where it was to be renumbered as car 19, but never saw service. UP reacquired the car in 1990 and named it for its Chicago-Portland Streamliner that ran from 1935 to 1971.
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24inch radius is recommended for operation.
HO BiLevel Commuter Car - Altamont Commuter Express ACE (Original) Set #1
San Jose
Includes: Cab: 3305 Coaches: 3205, 3208 (Series 3)
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO G2.0 SD60M Tri-Clops - DCC & Sound - Ex-BN CIT Group (CBFX) #6028
Primed for Grime Locomotive
CBFX FEATURES:
Ex-BN, unique patches/paint per road number
Small EMD plow, faded paint effect
Front deck mounted ditch lights
Cab door with window
After BNSF sold off some of their aging fleet of SD60Ms, a small batch were purchased by CIT group as leased power. They can be found on many different railroads as extra power.
ROAD NUMBER SPECIFIC FEATURES:
#6025
Black reporting marks on cab
small CIT logo on body
faded BN logo on nose
yellow frame stripes.
#6028 `
White reporting marks on cab
large CIT logo on body
painted out BN nose logo
yellow frame stripes.
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately ?painted and ?printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Warranty service available
Minimum radius: 18inch Recommended radius 22inch
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
Animated roller bearing caps
SOUND-EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO 85ft General American G85 Flatcar - Union Pacific #53038
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
Brass Strip - 12inch x 1/2inch x .016inch
Length: 12inch
Width: 1/2inch
Thickness:0.016inch
HO EMD SD70ACe Diesel - DCC & Sound - Norfolk Southern (Savannah & Atlanta Heritage) #1065
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
NS FEATURES:
Swapable alternate roof with leader PTC antenna array
(Also available separately [ATHG68899])
High-mounted headlight
Isolated cab
Front and rear illuminated ditch lights
Late handrails
Norfolk Southern - Heritage
In 2012, Norfolk Southern unveiled a group of 20 locomotives painted to honor their predecessor roads. In the late 2010s, the units had their roof configurations modified to accept Positive Train Control antennas. Both roof styles are included.
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
RS-18u, DCC & Sound - Ontario Southland #181
Era:2006-Present
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- SP -B-70-54 Delivery 2-1970
Product: Greenville 86′ Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Southern Pacific: This B-70-54 group covers SPs first order of quad door cars that were part of the GM Stamping Pool out of Cleveland, Ohio on the B&O. The scheme, of course, is simply one of the coolest paint jobs ever applied to a Greenville 86ft boxcar. Hold this car in your hand to appreciate the nuanced differences between white stenciling and SP Lettering Gray stenciling. From the huge dark gray arrows pointing to the centered SP logo, to the smallest black door handle detail, it?s all there. The SP cars feature their as-built 1970 appearance that includes Apex crossover platforms, a Universal hand brake housing (with separate long handle!) and a Universal brake wheel. SP ordered their cars with Center-Of-Car cushioning, and we have duplicated this setup, with a complete COCC underframe and draft gear. 70-Ton Trucks with 33in wheels and rotating Timken roller bearing caps finish off this replica. These SP replicas are Ready-To-Operate in eight numbers!
HO EMD FT A+B Set - DC/DCC/Sound - Reading (Black & Green) #253A + 253B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO EMD SW9 - DCC & Sound - Erie Lackawanna (EL Gray & Maroon) #435
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Erie Lackawanna:
1970 Repaint
Optional -beehive- style spark arrestors with short stacks in polybag
Deck mounted side handrails
Carbody style handrails
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
Building the Right-Sized Layout - Softcover Book
Softcover Book by Thomas Klimoski
112 Pages
Have an extra spare room in your house? Downsizing your layout? Building The Right-Sized Layout is the perfect book to help with planning a room-sized layout for your home. This new book features 5 track plans covering details on how to create a manageable layout with space, time, and resources in mind.
Youll find:
Track planning strategies
Construction techniques
Room-planning concepts
Tips on operating once your layout is built
And more!
Featuring author Thomas Klimoskis Georgia Northeastern Railroad, as well as 3 other examples of small layouts, this planning book is a must-have for model railroaders.
Walthers Cornerstone 3488 HO Vintage Motor Hotel Kit
Model an icon of 1950s and 60s highways with the Cornerstone Vintage Motor Hotel kit! This detailed HO structure features two floors of rooms and matches parts in the Vintage Motor Hotel with Office and Restaurant (933-3487, sold separately) to build a bigger complex. Many have also been converted into apartments, making it a perfect addition to modern city scenes as well. Other features include:
Compact footprint fits small HO lots
Separate one-piece door and window units for easy customizing
Air conditioner/heater grille details for each room
Detailed exterior stairs and railings
Makes a great apartment building for a contemporary layout
Matches parts in the Vintage Motor Hotel with Restaurant Kit (933-3487, sold separately) for easy expansion and customizing
Molded in five colors and clear plastic
10-3/16 x 4x2-5/8, 25.8x10.1x6.6
89ft Thrall Bi-Level Auto Carrier - Ready To Run - Milwaukee Road Rack, TTGX Flatcar #910260
(yellow, silver; yellow Flat)
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6inch (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
Factory-installed grab irons
Separately-applied ladders and brake equipment
Ultra-smooth rolling metal axles with 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24inch radius is recommended for operation.
HO Snow Plow - E- & F-Unit Type
Product Information
Details West Snow Plows will help keep the rails clear on your HO Scale layout. Available in several designs to match a variety of prototypes, each part is a detailed metal casting. This Snow Plow is part of the complete line of Details West HO Scale locomotive details.
Used by Amtrak, GN (BN), SP and WP.
N Scale Horizon Fleet Dinette - Amtrak Phase III Narrow #53002
Super-detailed, as is Tradition
Rapido brings their experience with passenger car models to this long warranted fleet of cars used for intercity travel across America (and even into Canada). The Rapido cars will feature the same great attention to detail youve come to expect, including free-rolling wheels, detailed underbodies, interior lighting and more.
Coach, Dinette and Club Dinette cars available
Full underbody details unique to each car style
Full multi-color interior detail with separate seats
Folding steps or fixed stairs as appropriate
GSI G70 trucks with free-rolling, turned-metal wheelsets
Accurate painting and lettering
Constant interior lighting in DC and DCC
Working marker lights
Separately-applied metal grab irons
N Budd RDC-1 (Ph 1) - DC/Silent - Painted, Unlettered
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AWWX 6 Pack
4602, 4608, 4609, 4618, 4621, 4631
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- Canadian Pacific
Trailer Train 60ft Pullman-Standard bulkhead flatcar #304667
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
N ACF 4650 cu ft 3 Bay Hopper - Western Pacific - Feather River #11793
Plastruct 91862 Blue Snowflake Square Tile Paper Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
SD70M-2, CITX #141 - DCC & Sound - SoundTraxx Tsunami2 sound
Antenna Dome
Early cab
Nose mount headlight
Nose door with no window
Early handrails
New for the SD70ACe and SD70M-2, LED lighting
Correctly-sized operating ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or tube style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Jacking pads per prototype
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
HTCR or HTSC trucks per prototype
Non-sound QuickPlug equipped with NEM 21-pin DCC plug
McHenry scale knuckle spring couplers
Minimum radius: 18 inch
Recommended radius: 22 inch
HO GP18 - DCC Ready - Grand Trunk Western #4707
Detailed Information
GTW FEATURES:
Winterization Hatch
Beacon
Bell mounted on long hood end
Sinclair antenna
Separate, optional ACI labels
Canadian style handrails
Separate, optional spark arrestors included with model
These units were part of an 8-unit order that arrived on the GTW in February 1960. They were part of the general freight pool of locomotives and were often seen working with their GP9 predecessors.
GP18 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Accurately-painted and printed paint schemes
Body-mounted McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
AK Interactive Wash : Track wash
Raised Plate ACI Placards -8pkg
In 1967 the rail industry introduced a nationwide system to track freight cars as they moved across the railroad network. The visual result of this technology was the application of ACI labels to the side of freight cars. These labels – or placards – were required on all freight cars from 1968 to ~1979, although the labels lasted far longer than that and can still be seen today. These finely-executed placards allow you to reproduce this detail on your freight car fleet, and include correct dimensions
HO GP9 - DCC Ready - Chesapeake & Ohio #6182
Detailed Information
C&O FEATURES:
Short hood mounted bell
Forward 5-chime horn
Dynamic brakes
Tall exhaust covers
Expert approved art
Between 1955 and 1957 C&O bought 363 GP9s. These units were the backbone of the fleet, used on both road trains as well as local service. In the mid 60s C&O adopted a new simplified paint scheme with the large C&O initials on the long hood. Although the purchase of newer high horsepower units displaced many GP9s to secondary service, most of the fleet soldiered on into the mid 80s. Many units were retired in this version of C&O dress. These road numbers lasted into the mid 1980s which allow the widest range of modelers to benefit from this release.
ROAD NUMBER SPECIFIC FEATURES:
#682
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#683
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#688
Dynamic brakes
bell mounted on long hood
#690
Dynamic brakes
bell mounted on long hood
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
HO 40ft ACF Modernized Welded Boxcar - Erie Lackawanna #88225
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO EMD SW9 - DCC & Sound - Canadian Pacific (CP Block Scheme) #7403
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Canadian Pacific:
Delivered in 1953 / GMDD
Short side handrails
Small number boards next to the headlight
Large barrel style headlight
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO Coarse Turf - Earth
Spray Can - Mica Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO GE P42DC - DCC Ready - VIA/Love The Way #908
Detailed Information
VIA FEATURES:
VIA-added extra nose light
VIA style antenna array
Dual 5-chime forward facing horns
Forward and reverse red marker lights
VIA approved artwork
Starting in 2017, VIA began to add wrapped schemes for their P42DC fleet. By 2019, -Love the Way- in both English and French was applied to a few select units with each side having a different version. In Nov. 2019, VIA applied the -Poppy- scheme, a tribute to veterans, to a small handful of units.
ROAD NUMBER SPECIFIC FEATURES:
#908
-Love the Way- scheme
English left side
French right side.
#911
-Love the Way- scheme
English right side
French left side.
#916
-Poppy- Scheme
P40DC/P42DC SERIES LOCOMOTIVE FEATURES:
Officially licensed product of Amtrak (Amtrak-painted units)
Officially licensed product of Via Rail Canada (Via painted units)
Officially licensed product of Operation Lifesaver (Operation Lifesaver-painted unit)
4 different nose variations: Amtrak as-built with strobes, Amtrak as-built without strobes, Amtrak rebuilt, and Via
Operating marker lights front and rear on Tsunami2 equipped models
Rear marker lights installed, but not connected on DCC Ready models
Newly-tooled lit number boards
Flashing strobe light and -Big-Hole- emergency light on equipped Amtrak units (Operational on DCC only)
Flashing ditch lights on non-strobe equipped Amtrak units synced with horn blow (Operational on DCC only)
Flexible rubber MU hoses
Flexible rubber trainline hose
Separately applied wire handrails
Exhaust stack
Photo etched metal radiator fan grille
Highly-detailed underframe including air tanks with air lines, air filter, and air dryer with two different types of rock shields
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting including operating ditch lights and red marker lights
Completely-redesigned die-cast frame for superior tractive effort
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
HO GE Dash 9-44CW - DC/DCC Ready - Union Pacific UP #9578
UP FEATURES:
High mounted number boards
K3 horn
Front ditch lights
Standard brass bell
SP body details
After the 1996 acquisition of the Southern Pacific, UP inherited Dash 9-44CW locomotives from the SP. As it was time for major maintenance, they
were eventually repainted into their new owners colors.
ROAD NUMBER SPECIFIC FEATURES:
#9578 Ex-SP 8114, Yellow sill, UP lettering w/o Flag, UP style plow, Sinclair antennas
#9599 Ex-SP 8135, Red sill, Sinclair antennas, SP style plow
#9647 Ex-SP 8173, Yellow sill, Sinclair antennas, small GPS dome, SP style plow
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
Red- (colour of light)
Simply plug into Light Hub, sold separately. 24AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug
Talus - Fine Gray (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings, and/or road cuts. Intermix grades and blend shades for the most realism. Color natural talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle talus and secure with scenic cement (#191).
Particle size - Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
N Diamond Tool & Engineering Building (Scale: 60 x 40ft) - Blue
Product Information
This kit can be built 20 or 24 scale feet tall. End walls and side walls have door opening provided . Rear walls have cut lines for optional door openings
Kit includes doors, windows, vent, signs, window glass and down spouts. Measures a scale 70 x 40 feet.
HO Scale 1980-1985 Chevrolet Caprice Wagon - Assembled - Yellow Woodie
The Rapido Chevrolet Caprice and Impala cars feature:
Both Wagon or Sedan carbodies
1980s body style designed from photos and drawings
Multiple front grille designs covering the entire 1980s
Real rubber tires (and white walls too, where appropriate)
Multiple rim designs (wire spoke, dog dish and more)
Realistic chrome finish on bumpers, rims and more!
HO Merchants Row 2 - Kit
Kit - 10 x 5 inches (25.4 x 12.7cm)
City models made easy! This kit brings together five different stores in one structure at a dynamite price.
Often just a few blocks away from the railroad tracks, the business district is one of the most important parts of any small town or big city. This unique kit combines five stores with one space-saving structure that fits on almost any size layout. Add your personal touch with paint and the full-color decals to create a one-of-a-king model for your steam- or diesel-era scene.
HO E-1 4-8-4 Modern Excursion w/ Smoke - DCC & Sound - Spokane Portland & Seattle #700
By the 1920s the Northern Pacific Railroad needed bigger passenger locomotives. With the help of the American Locomotive Companys design engineers, NP designed a new locomotive with a massive firebox that had a 115 square foot grate area supported by a four wheel trailing truck. It was the first locomotive with a 4-8-4 wheel arrangement. ALCO delivered the first of 12 of these new locomotives in December of 1926, with the balance arriving early in 1927. Designated Class A, and assigned road numbers 2600 through 2611, they had 73 drivers, 28 x 30 cylinders, a boiler pressure of 210 psi, a tractive effort of 57,500 lbs and weighed 426,000 pounds. Later, the boiler pressure was raised to 240 psi which increased the tractive effort to 65,700 pounds. These were the first of this new wheel arrangement and thus were to be the namesake, with the name Northern Pacific selected which was very quickly shortened to just Northern. In 1930, the Timken demonstrator came to the NP. While being tested, it suffered crown sheet damage. The NP bought it, repaired it and put it on the roster as number 2626. Ten Class A-2s (road numbers 2650 through 2659) came from the Baldwin Locomotive Works in 1934. These heavy Northerns had 77 drivers, 28 x 31 cylinders, a boiler pressure of 260 psi, a tractive effort of 69,800 lbs and a weight of 489,400 pounds. In 1938, eight Class A-3s (road numbers 2660 through 2667) were delivered from Baldwin. The specifications for these locomotives were identical to the Class A-2s except that each weighed 2,400 pounds more. The eight Class A-4s (road numbers 2670 through 2677) were delivered by Baldwin in 1941, and had the same basic specifications as the A-3s, but were different in appearance, with 14 wheel centipede tenders and vestibule cabs, and they were 1000 pounds heavier. The last of the 4-8-4s purchased by the NP were the Class A-5s, which were built by Baldwin in 1943. This group of 10 (road numbers 2680 through 2689) were built to the same specifications as the Class A-4s, but turned out to be 16,200 lbs heavier. They were among the heaviest of all the Northern type locomotives ever built, at 508,500 pounds only the Santa Fe Class 2900s weighed more. There are no surviving Northern Pacific Northerns.
Features:
NEW Paragon3 Sound & Operation System FEATURING ROLLING THUNDERTM with Authentic Sounds and
Prototypical Operation in both DC and DCC environments
Factory Installed Engineer / Fireman Figures
Synchronized Puffing Smoke with each Chuff
Variable Puffing Smoke Intensity and Timing
Locomotive Composition: Brass body with Die Cast Chassis
Tender Composition: Brass body with Die Cast Chassis
Couplers: (2) Operating Kadee or Compatible
Compatible Tracks: Code 70, 83, 100 Rail
Equipped with Traction Tires
Minimum Operating Radius: 22 in or greater
91 Interior Weathering Set - Enamel & Acrylic Paint Set (92, 93, 94,)
35ml X 3 jars per set
The interior paint of AFV s used to be a problem for even the most experienced of modelers. This set makes this task easy with three different products. First of all we have an acrylic paint which represents the interior color of German vehicles during WWII. This color also can be used for the interiors of many other AFV s. Also, we have included two weathering products, one for interior washes and another for streaking effects over the surface of interiors.
This set contains:
_ AK-092 RAL Cremeweiss.
_ AK-093 Wash for Interiors.
_ AK-094 Streaking Effects for Interior.
HO Auto-Max Carrier - CMO #800006
Era: Late 2000+
MODEL FEATURES:
- Separately applied ladders, brake rigging, stirrups, and handbrake details
- Simulated corrugated roof
- Full articulation with flexible diaphragm
- Safety striping
- 70-ton roller bearing trucks
- 33 inch machined metal wheels with RP25 contours
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
In 1999, Gunderson began production of the Auto-Max articulated auto rack car. This unique car can carry 22 SUVs on three sets of internal ramps. Measuring over 140 feet long and 20 feet tall from the railhead, the Auto-Max pushes the operational and clearance limits of the railroad industry.
Green Bay & Western #7038
FEATURES:
True scale dimensions with accurate details
Weighted, detailed underframes
Equipped with AccuMate Knuckle Couplers
Trucks equipped with free-rolling metal wheels
Accurate painting and lettering
HO RTR RS-3 - Standard DC - Canadian Pacific #8456
Metal grab irons
Large or small fuel tank per prototype
Fine scale handrails
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
See through etched metal radiator fan
See through cab windows
DCC-ready features Quick Plug? plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18in
NEW FEATURES:
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with cube speaker
LED lighting for long life and reliable operation
HO 68Ft Bulkhead Flatcar - TTX (Forward Thinking) #804739
Features:
Side stake pockets
Simulated tie-loops
Fishbelly center-sill
Prototypical pull-plates and lift rings
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Conrail
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
HO 53ft GSC Bulkhead Flatcar - Atchison, Topeka & Santa Fe #93120
FEATURES:
- One-time run of these car numbers, limited quantity available, order now!
- Now with die cast metal body for excellent performance empty or loaded
- Limited-edition - one-time run of these car numbers!
- Prototypes in service from 1950s to early 2000s - some in work train service today
- Used to carry lumber, utility poles, pipe, steel shapes, rail and various building materials
- Fully assembled with finely detailed body, deck and bulkheads
- Correct 33 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 89ft Thrall Enclosed Tri-Level Auto Carrier - TTX/ETTX Flat #331214/710768
Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these Walthers Proto models! Introduced in the mid-1970s especially to carry automobiles, the prototypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89ft flatcars with sidesill cut-outs and 28in wheels for added clearance. In service all across North America, the racks carry the owners logos, and most ride on flatcars leased from TTX with ETTX reporting marks.
A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
-Limited edition - one time run of these numbers!
-Prototypes in service from the 1970s to the present
-Factory-installed grab irons
-Separately molded and applied side ladders
-Ultra-smooth rolling metal axles with correct 28in wheels
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24in radius is recommended for operation.
HO PS-2-4427 High Side Covered Hopper - TLDX Delivery Pillsbury 3-1967 #6762
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
TLDX Delivery Pillsbury 3-1967 shows a very highly-requested private lessee delivery scheme for the Pullman-Standard 4427. The model you already have of this TLDX car is kind of close, but isnt quite right! The Pillsbury billboard lettering fills the side of the car, from the large outlined letters to the round Pillsbury logo mounted on a square placard. What a classic. This car features all the Pillsbury phase details, including center sill supports between the bays, solid end running board supports, Miner gravity gates and ribbed-style roof hatches. The model is equipped with 100-ton Barber S-2 trucks with separately applied brake beams along with rotating Timken caps. This is a big lease scheme.
40Ft Refrigerated Container [3-Pack] NYK Line Set #1
Set Numbers Include:711406, 711450, 711474
MASTER MODEL FEATURES:
Prototypically accurate Daikin reefers
40-foot High-Cube Refrigerated Container
Composite materials sandwich-sides design
Detailed picture window refrigeration unit with separate parts
ISO Type 45R1
Five hinge / four bar doors with OUT style handles
HO RTR 85Ft Budd Big Dome Bar Lounge Dormitory - Santa Fe #60
Business Train (Real Metal Finish)
Non Lighted
Product Information
Modeling one of Santa Fes most unique cars is easy with the 85Ft Budd Big Dome Bar Lounge Dormitory! Tailor-made for enjoying trackside scenery, the glass-enclosed upper deck offered superb views for 57 passengers in coach seats, with 18 additional lounge seats. The lower level provided an additional small lounge area, along with dormitory space for 12 crewmen. Ready for operation or display, features of this WalthersProto replica include:
Real metal finish simulates stainless steel
Factory-installed grab irons
Prototypically accurate window tinting
Window gasket details as appropriate
Sprung operating diaphragms
Modeler-installed extended drawbars for 22Inch radius curves included
Turned metal RP-25 wheelsets and correct trucks with built-in electrical contacts
Proto MAX metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24Inch radius is recommended for operation.
HO Relay Cabinets & Phone Boxes (7pcs)
Bring your HO Scale steam- or diesel-era railroad to life with these ready-to-use accessories from SceneMaster! In the days before railroad radio was common, trackside phone boxes could be found at key locations along the tracks where crews might need to call the dispatcher. Relay cabinets provided secure and easy access to electronics controlling signals, grade crossing protection and more. Ready to install, this set is complete with three cabinets and four phone boxes.
N Scale Short Barrel Ore Hopper - CN Mineral Brown #346062
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO GMD-1 - DCC & Sound - Canadian National (1900s Noodle w/ Red Cab) #1910
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
Microscale 87-1120 HO Christmas Decals - Snowmen Scenes
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CWSX Data Only
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Evergreen Scale Models 9125 - .125in Plain Opaque White Polystyrene Sheet (1 Sheet)
6in x 12in SHEET
Double-Ended Pin Vise - With 2 Double-Ended Collets
The Zona Double-Ended Pin Vise comes with two double ended collets with 0inchp.109inch or 7/64inch (0 p2.7686mm) capacity range. 3-7/8inch overall length. Four chuck sizes for drills, miniature reamers, files and small tools: 0 p.05inch, .03 p.08inch, .05 p.10inch, and .07 p.11inch.
HO 50ft 6in Boxcar - CSX #136043
Features:
- Prototypical non-terminating corrugated ends
- Diagonal paneled roof
- Single 10-foot YSD design sliding door (non-operating)
- Detailed cross-member attachment rivets on the side sills
- Weighted, detailed underframes
- True scale dimensions with accurate details
- Equipped with AccuMate knuckle couplers
Walthers Goo 1oz 29.lmL Tube
GOO(R) is the all-purpose adhesive that grips almost anything. It never lets go. GOO is perfect for building or repairing jobs on your layout and around the house. The easy contact action of GOO produces fast-setting joints with any material. GOO works with all types of metals including steel, brass, aluminum, copper and more. It also works on plastic, wood cardboard, china, leather, vinyl, ceramics, paper, concrete and many more surfaces. GOO is a permanent rubber base adhesive that s shockproof-its as flexible as rubber. Joints won t crack when flexed back and forth, won t break loose when the temperature changes and won t weaken when wet or damp. It sticks forever! Repair shoes.
For more precise applications of GOO right from the tube, pick up a pack of Micro Tips (#904-302)! Easily added to GOO tubes or most any 3/16 inches diameter glue nozzle, the end can be trimmed for a faster/wider application if needed.
HO International 4300 Utility Truck w/Drill - Assembled - White
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Position-able Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
Introduced in 2002 to replace the 4000-series trucks of the 1990s, the medium-duty 4300 was built in three variations and became a very popular chassis for a variety of commercial applications. Today, they are still in production as the International Durastar.
HO Scale SD30C-ECO - DC/DCC Ready - Canadian Pacific #5012
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
SD-1 Signal Driver
Logic and output drivers to control any 3-lamp, 3-color block signal. Will power LED or lamp-type signals. LED-type requires common positive (anode) connection of all LEDs. Detection circuits (such as BD-1) are needed for a minimum of three blocks to display all three aspects.
Features
All scales
Drives LEDs or Incandescent Lamps
10-18 volt DC input
HO Coalveyor Bathtub Gondola - David Joseph (Blue) #30940
FEATURES:
Die-cast chassis
Ready-to-run
Interior bracing
Removable coal load
AccuMate couplers
Brake detail
100-ton roller-bearing trucks
Fine scale wheels
Accurate painting and printing
These cars were usually run in blocks of 4-12 units, carrying
construction and demolition debris.
HO Single BiLevel Commuter Car - Undecorated Coach - Series 2 Body
Note: Unnumbered coaches do not include decals. Decals are available from Highball Graphics.
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO RTR 57Ft Trinity Spine Car - 3 Car Set - TTRX #360899
ETA: November 2022
Detailed Information
MODEL FEATURES:
Precision die-cast metal spine structure
Etched metal walkways
Separately applied brake piping
Fine ladder detail
Weighted for optimal performance
McHenry scale knuckle spring couplers installed
33inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Trailer hitches come separately in raised and collapsed configurations so the customer can apply them to the model to suit their preferences
Minimum radius: 20inch
Model Wash - Blue Grey - 35ml Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Blue Grey is recommended for vehicles with a Panzer Grey base color, as well as all vehicles with a similar grey base.
Morning Sun Books 1662 Minnesota Mining Railroads In Colour Volume 1 By David C Schauer
Minnesota Mining Railroads in Color Volume 1 takes a look at the iron ore railroads of Oliver Iron Mining Company (U.S. Steel), Hanna Iron Mining Company, Balkan Mining Company and Mesaba-Cliffs. Steam, diesel and electric operations are included with numerous color images dating from the 1950s through the 1990s.
HO H21E 4-Bay Hopper - Painted, Unlettered Car
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Tru Color Paint 01516 - Thinner for Acrylic Paint - 16oz
RTR 67Ft Trinity 6351 4-Bay Covered Hopper - ADM
Product Information
Expand grain traffic in minutes with layout-ready WalthersProto(R) 67Ft Trinity 6351 Four-Bay Covered Hoppers! Introduced in the early 2000s, these large-capacity cars are industry favorites for handling dired distillers grains (DDG), malt and many other food products. Other features of these HO Scale replicas include:
Limited edition - one time run of these roadnumbers!
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct 36Inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Union Tank Car #17365
Built: 7-37
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
EVODX - Evolution Express Advanced 5A/8A Duplex Starter Set
Everything you need to get started with Advanced Digitrax Command Control.
Evolution Express is perfect for most home and club layouts wanting Duplex Radio control out of the box.
It offers excellent speed control, prototypical consisting, the full range of programming features and much more.
Maximum capacity, maximum features. Take it to the Max with Evolution Express!
Evolution Express Duplex Set Includes:
DCS210+ Command Station/Booster With Intelligent AutoReverse
DT602D Super LocoNet Throttle
UR93 Duplex Radio Transceiver Panel
PS615 Power Supply
PS14 Power Supply (For UR93)
Evolution Manual
The DT602D Advanced Super Throttle & DCS210 Advanced Command Station Offers:
Works with compatible LocoNet systems
Color 2.4in LCD Display Screen
Full Duplex radio when paired with a UR92 or compatible Duplex Transceiver (sold separately)
Advanced menu system and displays
Built-in scrolling help and prompting
Soft ON/OFF switch, with zero OFF power-drain
Advanced display Power Saving for longer wireless battery operation
Throttles are now powered in wireless modes by 3 AA cells! No more 9V batteries to remove!
Can use recharged AA batteries
Works in standard tethered, IR or Radio Duplex modes
Duplex Scan for available Networks and radio signal strength. Run without cords!
All throttles come with a LocoNet cord that can be unplugged, and is replaceable
Dual throttle controls let you control two locos simultaneously
Run locomotives with encoder click knobs for both speed and direction control
Full numeric keypad makes loco selection simple
Control light and sound effects functions with the press of a button
Control 29 functions (F0-F28).
Function active/inactive indicators
Convenient step-by-step throttle option set up
Supports simplified decoder programming
Simplified 2 or 4 digit addressing setup
Over 9,000 locomotive decoder addresses
Supports turnout and stationary decoder control
Over 2000 turnout decoder addresses
Fast clock display
Recall feature
Advanced Route editor
Big System Capacity for Big Layouts:
Run up to 100 addresses at the same time on your system.
Run up to 100 throttles at the same time on your system.
Over 9000 Locomotive Addresses:
Address 00 for operation of one loco or MU consist without decoders
Two Digit Addressing is easy to use. (Address 01-127)
Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+)
5 or 8 Amps of Power to Run More Trains:
Selectable Scale Voltage for Safe Operation in ALL Scales
Customizable Voltage Settings
5 amps of power with included PS615 power supply
8 amps with PS2012E power supply (sold separately)
Function Control:
Control 29 functions (F0-F28).
Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities).
Two DCC Outputs are Better than One!
Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders!
Use one output for a braking section while the other runs the layout.
Decoder Programming:
Built in read/write programmer lets you program and read back CV values.
Supports Paged programming (Digitrax preferred method). Also supports direct, register and ops mode programming
Consisting:
Supports Universal consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even analog locos.
Advanced consisting and Basic consisting, too!
Nested consisting where consists can be consisted together.
Stationary Decoders, Turnout Control & Turnout Position Reporting:
Access to stationary decoder control for turnouts and other devices.
DT602 reports turnout position based on last command sent.
Control 2000+ stationary decoder addresses.
Routes:
Turnout List/Route capability to simplify complex yard operations.
EZ routes button for simplified Command Station route programming
Customizable System Options:
Turn audible warnings on or off.
Set up purging options.
Multi-format command station mode.
Loco Reset button for easy system purging
UR93 Duplex Radio Transceiver Panel:
Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support).
More than double the radio range of UR92 Duplex units.
Plug and Play setup, PS14 Universal power supply included.
Compatible to be mixed with UR92 LocoNet Duplex Radio systems, for added coverage and reception.
Status LEDS.
Supports combinations of DT602D/DE and DT500D, DT400D and UT4D Duplex Radio throttles.
UR93E available for countries that require EN-300-328 Wireless conformity.
Expandability:
Evolution is just the beginning for large, complex layouts that emphasize prototypical operations.
With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more.
DCS210+ comes with 3 LocoNet ports for easy expandability and a USB Interface!
Other Advanced Features:
IPL updatable firmware for continued product improvements
Device Query and Device Statistics to help with troubleshooting
Input Mode to help set up detection on your layout
Uses Expanded slots
HO Bettendorf 50 Ton Truck With Brass Wheelset - 1 Pair
Highly detailed truck sideframes
Nickel silver plated brass insulated wheelsets
These wheels follow NMRA RP-25 Standards.
One wheel is insulated from the all-metal axle.
The entire wheelset is non-magnetic.
The axle length is approximately 1.006" (+- .004in).
Airbrush Intermediate Set Double Action
This kit combines the Paasche double action VL-3AS, D500SR compressor and AC-7 cleaning kit.
VL airbrush with size 3 head, size 1 & 5 heads, 1 oz bottle assembly, 1/4oz metal cup, 1oz storage bottle, 6ft braided hose, 1/8inchBSP adapter, hanger, wrench and lessons book.
Specs:
Part Number: VL-3AS
Type: Double action, Internal mix, Siphon feed
Head Size: Size 1 (.55mm), Size 3 (.74mm), Size 5 (1.05mm)
Fluid Packing: PTFE - Can spray solvent or water based fluids
Air Volume: 20 PSI .5 CFM
Air Pressure: 20-75 PSI
Air Inlet: 1/4-20 Thread (Paasche thread) - adapters available
Bottle size: 1/4oz to 8oz bottles available
Spray Pattern: 1/32 to 1-1/2
Weight: 1.1 Lbs
Finish: Chrome plated body
The D500SR airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The D500SR is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses.
The compressor features include:
1/5 HP piston compressor
Regulator & moisture trap
Delivers 1-35 PSI depending on airbrush being used
Standard Paasche 1/4NPT hose fitting
1/8 BPS hose adaptor for competitor hoses
Auto shutoff feature
Carrying handle
Quiet: noise level is 47 Dbs
7 piece airbrush cleaning kit. Can be used to clean any airbrush.
HO Trenton Works 6348 CN Boxcar - Canadian National (w/ Conspicuity Stripes) #598152
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
HO 36ft Galvanized Steel Grain Bin - Kit
(Narrow - 2.66 inch Corrugation)
Corrugated steel grain bins are a staple in any agricultural setting, placed on farms, elevators, industries, and beside railroad tracks. Used with a variety of farm commodities, these bins provide a safe, dry place to store that commodity until it goes to market.
With several styles to choose from, these grain bins will look right at home on your layout. They feature prototypical corrugations, realistic galvanized steel appearance, various side sheet heights, and a variety of diameters.
Narrow corrugation bins have corrugations spaced a scale 2.66 inches and the rings are 32 inches tall. Wide corrugation bins have corrugations spaced 4 inches apart with 44 inch tall rings.
All bins are easy to assemble - just stack the rings, glue them together, attach the roof and you are done! Every ring comes as one solid piece, so no time consuming and messy assembly of individual side sheet pieces to create each ring, saving you time and frustration!
What size bin will fit your space? Try our grain bin size calculator or printable template.
https://www.iascaled.com/store/GrainBinSizeCalculators
https://iascaled.com/docs/ho-bin/GBM-HO.pdf
HO Code 100 Double Slip Insulfrog Crossing
Double slips can save valuable space at station approaches, junctions, etc.
If you wish to mix wheel standards on your 00/H0 layout, this is the trackage to choose. Code 100 rail allows flange depths up to 1.6mm which means that both vintage and current stock will run happily together.
The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make it easy to build convenient, complex and aesthetically pleasing formations using combinations of small, medium and large radius turnouts and crossings.
Technical Specification:
Length: 249mm
Frog Angle: 12 Degrees
USE:
SL10 Conducting Rail Joiners: Nickel Silver for PECO Code 100 track
SL11 Insulated Rail Joiners for PECO Code 100 track
SL14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork
OVR Exclusive - HO Bi-Level Auto Rack - CP Rail/TTGX #603858
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO Trenton Works 6348 CN Boxcar - Canadian National (As Delivered) #598082
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
HO Alco FA-1 - DCC Ready - Canadian Pacific (Block Scheme) #4008
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO SD60 - DCC Ready - Chicago & North Western/Operation Lifesaver #8029
MODEL FEATURES:
Locomotives come with railroad-specific details including: Operating beacon (in DCC/Sound version), horn, winterized hatch, antenna, handrails, etc.
SPECIFICATIONS:
DCC: Ready/21-Pin NEM
PROTOTYPE MANUFACTURER: EMD
Axles: 6
LIGHTED: LED Lighting
PROTOTYPE AND BACKGROUND INFO:
In 1984, Electro-Motive (EMD) introduced the 60 series locomotive. These had many improvements over the earlier models including features such as: New and improved EMD 710 power plant producing 3600 HP, wheel slip control, computerized cabinet replacing the older and unreliable components.
This design spawned into many other upgrades within its class like the modernized wide cab, Isolated cab, and even the start of AC traction technology.
These locomotives were suited for just about any mainline service that could be thrown at them. The model was fairly popular with class one railroads, with Norfolk Southern purchasing the most at 151 units. Most of them are still in service today. Norfolk Southern in 2010 started a large full rebuild program of their SD60s (including purchasing cores from other sources) into SD60Es, which rebuilt them from the frame up with new electrical components and a newly designed cab to improve visibility and forward crash impact safety.
Tangent Scale Models HO PS4750 Covered Hopper ROCK -Delivery Blue 6-1978
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ROCK -Delivery Blue 6-1978- is available in the Blue Original 1978 scheme. Our -R- black and white logo and blue color is stunningly executed, check it out for yourself. ROCK lettering done right is something to behold, with accurate data stencil breaks and careful duplication of ROCKs data style. This is Tangent-accurate hand-drawn artwork. We have also matched the 1978 ROCK details including body-mounted brake center sill linkage, Miner outlet gates, a Universal hand brake and matching Universal brake wheel.
Vallejo 73827 - Model Wash - Weathering FX - Moss and Lichen - 40mL Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Blue Grey is recommended for vehicles with a Panzer Grey base color, as well as all vehicles with a similar grey base.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140018
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 40Ft PS-1 Boxcar - ATSF (Bx57 Super Chief) #31417
Date: BLT 5-50
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
N Old Weathered Barn - Built & Ready Landmark Structures - Assembled
Product Information
A stunning representation of a traditional gambrel barn with concrete silo. Although this iconic beauty has seen better days, it will add charm and character to the rural area of any layout. Details include a field stone foundation, shake shingled roof, hayloft door with pulley and rope, a vintage weather vane atop a slatted cupola, concrete grain silo, implement shed and intricately styled, paned windows and traditional barn doors in various states of disrepair.
Measures: 3-3/16 x 4-1/4 x 2-11/16inch 8.09 x 10.7 x 6.8cm
HO Bathtub Coal Gondola - DREX (ex-Procor) #104018
Built: 5-05
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO 50Ft PCF B70 Boxcar - w/ Superior Doors - Southern Pacific #244090
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
HO 85ft ACF Dome Diner Coach - Union Pacific (Missouri River Eagle) #7011
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
UPP 7011 Missouri River Eagle was built as UP Dome Coach 7011 in November 1958 and is named for the Missouri Pacific train serving St. Louis and Omaha from 1940 to 1971, MPs first and last diesel-powered streamliner.
Product Information
Make Your Decals Settle In Like Paint!
For the most realistic models, decals should look like theyre painted on. Getting professional results is easy with Solvaset. It actually softens the decal film so it snuggles down to the surface and stretches over details, such as rivets, without hiding them. Also eliminates air bubbles, white spots, draping and silvering. Just brush it on and Solvaset does the rest!
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.06 (10pcs pkg)
Early Fall Colors -60 sq. in
Excellent for indicating trees, vines, weeds, bushes or any low growth. Create desired density by simply stretching foliage material
HO Lightweight Coach - Missouri Pacific - Jenks Blue #477
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO RTR PS 4740 Covered Hopper - Illinois Central (3pkg)
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Body-mounted McHenry operating scale knuckle couplers
36inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Multi-packs feature unique road numbers
Weighted for optimum performance
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
HO SP C-40-3 Steel Cupola Caboose - Texas and New Orleans (T&NO Delivery Scheme) #400
1940+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
HO MLW M420 A/B Set - DCC & Sound - British Columbia (Lightning Stripe) #642, 686
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero
Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO
trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including
eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over
North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Trailer-Train with B&O Bulkheads #90656
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Evergreen Scale Models 4062 .060in Opeque White Polystyrene Novelty Siding (1sheet)
HO RTR 53Ft Jindo Container - FROMX (3pkg) #1
MODEL FEATURES:
Newest vertical rib front
Easily stackable
Separately applied door closure rods
Fully assembled
Each container individually numbered
Razor sharp printing and painting
20 Amp Power Supply 13.8-23 VDC
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Nickel Plate Road #558
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO Value Line RTR - 13 Panel Coalporter - Conrail Quality #505535
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO RTR ACF 2970 Covered Hopper - Grand Trunk and Western #315061
Detailed Information
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons and stirrup steps
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple road numbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
HO GE 44 Tonner Phase IV - DC/DCC Ready - Canadian National (Green) #2
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
HO GMD SD40-2 - DCC & Sound - CP Rail #5873
Plows Both ends
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
1/24 Scale - SCX24 RTR 2021 Ford Bronco 4WD Truck Brushed - Gray
Axial reaches a new peak in 1/24 scale realism with this officially licensed Ford Bronco 4WD that tops the proven SCX24 platform with a highly detailed ABS hard body. Ideal for indoor or outdoor trails, its a must for Ford fans and RC enthusiasts of all ages!
- Factory-assembled and ready-to-run, with 3-channel radio, 030 brushed motor, servo, ESC/receiver unit and AA transmitter batteries included
- Officially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tire
- Bonus second decal sheet for optional customization
- Nitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheels
- Working lights in front, with molded lenses on all four corners of the body
In The Box:
(1) Axial SCX24 Ford Bronco 1/24 Scale 4WD RTR
(1) Horizon Hobby 2.4GHz 3-Channel Radio System
(1) Axial AS-1 Micro Servo
(1) Horizon Hobby ESC/Receiver Combo
(1) Dynamite USB LiPo Charger
(1) Dynamite 88T 030-Size Brushed Electric Motor With Pinion
(1) Dynamite 350mAh 2S 30C 7.4V LiPo Battery
(4) AA Batteries for Transmitter
(2) Decal Sheets
(1) Product Manual
Needed to Complete:
Nothing ? everything is included in the box!
Plastruct 91630 HO Asphalt Shingle
Specs
Scale: HO (1:100)
Width 12in (300mm)
Lenght 7in (175mm)
N Scale Urban Steel Overpass - Kit
With Angled Wing Walls: 7-1/4 x 5-1/2 x 1-13/16 inches (18. 5 x 14 x 4.5cm)
With Straight Wing Walls: 5-15/16 x 6-1/2 x 1-13/16 inches (15 x 16.3 x 4.5cm)
Combine roads and rails easily in N Scale scenes with the Cornerstone Urban Steel Overpass kit. This highly detailed structure is typical of common designs in use from the 1900s on as increasing auto traffic made replacement of grade crossings a better option, and many are still in use today. A realistic addition to commercial, industrial or residential areas!
FEATURES:
- Builds double-track railroad ballasted-deck bridge with two-lane roadway below
- Scale 15ft 6 inch (4.7m) overhead clearance between roadway and bridge deck side girders
- Highly detailed girders, beams and columns with scale rivets molded in medium gray
- Separate wing walls can be installed to fit straight or angled installations
N Ballast Spreader
Spread ballast the easy way with this handy tool!
HO 53ft GSC Flatcar - Conrail #716200
FEATURES:
- One-time run of these car numbers, limited quantity available, order now!
- Now with die cast metal body for excellent performance empty or loaded
- Prototypes in service from 1950s to early 2000s - some in work train service today
- Used to carry all kinds of cargo including machinery, lumber, steel shapes, rail and various building materials
- Fully assembled with finely detailed body and deck
- Correct 33 inch RP-25 metal wheelsets
- Proto MA(TM) metal knuckle couplers
HO 36 Inch High Detail Semi-Scale Insulated Brass Wheelsets (12/pkg)
The front and back profile of these wheels is more prototypically accurate.
These wheels follow NMRA RP-25 Standards.
One wheel is insulated from the all metal axle.
The entire wheelset is non-magnetic.
The axle length is 1.006in (+- .004in).
HO New Look Bus Kansas City Metro
Destination Sign:
Kansas City
Detail Variations:
Bus-o-rama Panels
Air Conditioner
Rear EIP Exhaust Package
4-window exit door
Late-style engine door
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OAKX (6 pkg) #4
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
22
31
37
41
56
62
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX #16118
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Master Plus 5250 Covered Hopper - Seaboard Coast Line #260022
Features:
Updated tooling
Ready to run
Injection molded plastic
Fine scale detail
Etched metal roof walk
Metal knuckle couplers
Road specific hatch and outlet configurations
Road specific roof walk variations
Three body style variations
Separately applied wire grab irons and wire brake lines
Crisp painting/printing
Free-rolling 100-ton trucks
HO 60ft Gunderson Boxcar - Norfolk Southern #471308
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Fully assembled and ready-to-run
- Razor sharp painting and printing
- Weighted for optimum performance
- 36 inch metal wheels with RP25 contours
- Minimum radius: 18 inches
HO Union X-3 Tankcar - Products Tank Car (PX) #32497
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
Plastruct 90121 Brass Insert Wire .045 (10pcs pkg)
SCALE
ALL
MATERIAL
BRASS
OUTSIDE DIAMETER (O.D.)
0.45
1.1mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
Plastruct 90082 ABS TEE 1/16 (8pcs pkg)
HO 89ft Thrall Bi-Level Auto Carrier - CP Rail/TTGX #160903
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
HO GE C36-7 - DC/Silent - Union Pacific #9036 (1988 Reletter)
The Rapido Trains HO Scale C36-7 is based on General Electric's higher-horsepower six-axle Dash-7 offering, with a 16-cylinder 3,600 horsepower or 3,750 hp rating (compared to the C30-7's 3,000 hp.) Built between July 1979 and February 1989, over 599 total units were produced. Of those, 129 were domestic orders for Conrail, Missouri Pacific, Norfolk & Western, and Norfolk Southern. Another 40 were made for Ferrocarril del Pacifico and National de Mexico. Lastly, 422 were made for China with many significant export differences, and the final units produced were 8 for Comilog in Gabon. Despite smaller production numbers, the C36-7 was ordered at key moments that resulted in it representing the evolution of GE s Dash-7 line more than the popular C30-7s. When GE launched "1977 Series Locomotives" (Dash-7s) in, they cataloged a C30-7, C33-7, and C36-7. Railroads immediately ordered C30-7's for booming coal service. The C33-7 was never ordered. The C36-7 was ignored until 1979, when National de Mexico and Ferrocarril del Pacifico placed orders. These export C36-7s for Mexico were essentially identical externally to C30-7s, which were being built by the hundreds at the time. Ferrocarril del Pacifico's units were repainted into striking two-tone blue FNM paint and worked both freight and passenger service. Of the 40 C36-7s built for Mexico, only one is still in service in 2024 - Ferromex 9336. Incredibly, despite being the last operating C36-7 (among few remaining operating C30-7's) 9336 was repainted in Ferromex's classy "Diet Coke" scheme in 2023. The Rapido model features railroad and era-specific details, etched-metal grilles and details, roadname-appropriate lighting packages and Rapido semi-scale knuckle couplers on both ends. The smooth-running drive features a five-pole motor with dual flywheels, backed up with the MoPower capacitor system for uninterrupted operation. This standard DC model is DCC ready with a 21-pin interface for easy conversion. The GE C36-7 is part of the line of Rapido Trains HO Scale locomotives.
The Rapido HO Scale C36-7 Locomotive features:
Headlights and rear lights
Class lights, marker lights, or ditch lights, where applicable
Step lights
Lit numberboards
Full traction motor casing details
Metal brake chain on engineers side
Detailed underbody piping and conduit
Separate grab irons
Rapidos innovative dead straight metal side handrails with plastic stanchions
Detailed cab interior
Lighted control stand
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Sound-equipped units feature ESU Loksound V5 decoders
HO International 7600 Flatbed Truck Orange Cab w/ Black Flatbed
HO Universal Coupling Kit (8pcs)
Eight-piece kit includes two 105mm steel shafts with plastic splines and universal joint components (enough parts to retrofit one brass or plastic locomotive).
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23081
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
ATOM DCC Block Detector
The Iowa Scaled Engineering ATOM is a reliable, easy-to-install, single-channel DCC block detector. Compatible with a wide variety of other block detectors on the market, the ATOM provides two open collector outputs (one for detection, one for no detection) with optional pull-up resistors and easy pushbutton sensitivity adjustment. Since it is based on a current transformer, the detector maintains isolation between your track and signal systems.
This version has screw terminals for the power and output connections. For our friends invested in C/MRI, we offer an alternate version of the ATOM (part number CKT-BD1-CMRI) with a plug that connects directly into the C/MRI detector motherboard and provides a drop-in replacement for the DCCOD.
FEATURES:
- Isolated, current-transformer based detection for DCC
- Highly sensitive (~1mA, equivalent to a 10k ohms)
- Simple single button sensitivity adjustment
- Two opposite polarity, open-collector outputs (40V / 250mA capable)
- Optional built-in 10k output pull-up resistors
- Powered from 5V to 24V
Typical Applications:
- Detect block occupancy for signal systems
- Activate grade crossing signals
- Trigger sounds
- C/MRI track occupancy inputs
Specifications:
2.0(L) x 1.5(W) x 0.875(H) inches
HO Commonwealth Trucks (1 pair)
Tangent Scale Models HO Greenville 86ft Quad Door Boxcar - PC- Delivery X-60-R 2-1970
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Penn Central (PC) -Delivery X-60-R 2-1970- offers another big paint scheme for our customers. A big PC logo dominates the center of these cars, with a stacked Penn Central on the far left. Fans of the Penn Central expect the best from Tangent, and we aim to deliver just that. This 1970-built Greenville group features accurate End-of-Car Cushioning details, Gypsum crossover platforms and truck mounted brake hardware. This X-60-R order rides on 70-Ton Barber S-2 Birdsboro Roller Bearing Trucks, with 33in wheels and accurate rotating Brenco-6 roller bearing caps. These cars were part of the GM Lansing Stamping Plant car pool, with a return-when-empty stencil the GTW in Lansing, Michigan. These beauties are available with eight different road numbers!
Intermountain HO - Trailer Train HTTX
60 ft Wood Deck Flat Car
Features sharp paint and lettering, wire details, laser-cut wood decks, metal wheelsets and Kadee(R) couplers.
HO New Look Bus Calgary Transit
Destination Sign:
Bowness, 1, West
Detail Variations:
Left-side Emergency Door
4-window exit door
Early-style engine door
Standee Windows
HO EMD FT A+B Set - DC/DCC/Sound - Lackawanna (Grey & Maroon) #651A + 651B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO 40ft ACF Modernized Welded Boxcar - Detroit & Mackinac #3149
FEATURES:
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Part Four 14 x 6inch 35 x 15cm
Add character to urban areas along your railroad with this series of structure kits. The models feature detailed walls made of cast Hydrocal, plastic windows and doors, along with full-color signs and awnings. Each can be assembled with basic hobby tools, and easy to understand step-by-step instructions walk you through construction, from gluing the kit together to final painting and weathering.
This kit has been upgraded from earlier versions with: Mt. Albert Scale Lumber for the fence, Paper Creek aged corrugated roofing for the shed, Tichy windows, a Rix Products storefront, a laser-cut -Auction- stencil, full-color signs (including the large pin-up art for the -Bottoms Up Bar-), a laser-cut roof, new detail castings (boxes, crates, junk, etc.), microshredded newspaper for -street debris,- a full-color billboard, tarpaper roofing, awnings and more
For more detail on how to start and finish model go to downtowndeco .com TUTORIALS WITH RANDY HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
HO Scale GP38 - DC/DCC Ready - Santa Fe (Yellow Warbonnet w/o Class Lights) #2346
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
N Scale Flexi Flo Hopper (Late) - Conrail (Flexi Flo Hopper Repaint) #897865
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO Canadian National Diesel Stripes (1961-1992) - Decals
Circa: pre-1992
Scale: HO Scale
Equipment Type: Canadian National (CN) Diesel Locomotive Hood Units Stripes
Description: Canadian National Diesel Stripes (1961-1992) use with 87-567 Diesel - Hoods - Striping - Waterslide Decal - HO Scale
Tru Color Paint - Acrylic - Erie Lackawanna Gray - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 85ft General American G85 Flatcar - Southern Pacific #512012
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
12inch Long Round Aluminum Rod - 5/16 inch Diameter
Round Aluminum Rod - not hollow (1 pc)
Outside Diameter: 5/16 inch
HO Value Line RTR - 13 Panel Coalporter - Conrail #503052
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO 70-Ton 12-Panel Hopper - Erie Lackawanna #33685
Blt.3-74
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
N Scale CV-1 Compact Oval Set
Complete oval with 8 pieces of 6 inch curves and 4 pieces of 124mm (4 7/8 inches) straight pieces.
Includes a rerailer and feeder track.
5/32 inch Diameter Round Brass Rod - 12inch Long
1 Piece
Norfolk Southern NS Honor Our Veterans #6920 - LED Lights
Onboard DCC decoder with SoundTraxx Tsunami2 sound - LED Headlights
NS built 4000 gallon fuel tank
Roof mounted sinclair antennas
NS designed snow plow
Different cab panel louver arrangement per prototype
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
LED lighting including:
Headlights
Illuminated deck mounted ditchlights front and rear
Numberboards
Ground lights above front trucks
Long hood mounted Nathan 5-chime air horn
Sunshades
Rounded or rectangular cab windows per prototype
Flexible rubber multiple unit (MU) hoses with silver glad hands
Flexible rubber front and rear trainline air hose with silver glad hands
Step wells feature seperately applied individual see through photo-etch steps
Coupler cut levers with loops
Anticlimbers
Safety tread on the walkways
Anti-glare panel painted on the nose
Factory applied photo-etch windshield wipers & lift rings
See through and tinted cab windows
Detailed and painted cab interior with control stand, display screens, detailed crew seats
See-through radiator fans
Factory installed wire grab irons
Fine-scale handrails for scale appearance
Underframe mounted E-bell
HT-C trucks with Timken bearings
McHenry scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18 inch
Recommended radius: 22 inch
1941-46 32Ft Fruehauf 32Ft Fruehauf Bekins Moving Van Resin Cast Kit
HO 60ft Bulkhead Flatcar - CP Rail #316399
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
HO AutoFlood III RD Coal Hopper - GLFX #8085
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0005
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 85ft General American G85 Flatcar - GTTX (Brown) #300391
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
HO GATC 2600 Airslide Hopper - Rock Island #8539
MODEL FEATURES:
- Three different body styles
- Rectangular or oval shaker brackets
- See-through metal roof walk
- Highly detailed, injection molded body
- Fully-assembled and ready-to-run out of the box
- Detailed underbody including outlet piping
- Gravity or gravity-pneumatic outlets
- Roller bearing or Bettendorf trucks
- Factory installed wire grab irons and brake piping
- Coupler cut levers and train air lines
- Machined metal wheels
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Operates on all popular brands of track
- Minimum radius: 18 inch
HO FMC 60ft Hi-Cube Ex-Post Boxcar - MILW #4222
MODEL FEATURES:
- Single 10ft Youngstown door
- Separately applied grab irons, end ladders, and brake wheel
- Photo-etch coupler cross-over platform
- Highly-detailed, injection-molded body
- 36 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Minimum radius: 18 inches
HO 4650 Centerflow Hopper - Wisconsin Central (CN) #87044
Features:
Etched metal roof walks
Detailed brake gear
Blackened metal wheels
Accurate painting and printing
100-ton roller-bearing trucks and body mounted AccuMate couplers with screw-attached coupler pockets.
AccuMate couplers are made under license from AccuRail, Inc.
HO EMD SD70ACe Diesel - DCC & Sound - Progress Rail (EMDX) #2115
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
PRLX FEATURES:
Late production units with isolated cabs and PTC antennas
Large inverter cabinet grills
Front and rear ditch lights
Due to surplus production line capacity, Progress Rail outshopped several locomotives in the early 2020s (some sources indicate that these units were to be part of a Norfolk Southern order). The two units on offer here are known as -Tier 4 Credit SD70ACes-, and are produced using -banked- credits that are obtained from the production of tier 4 emissions-compliant units.
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Alco RS3-M Chop Nose - DCC & Sound - Delaware & Hudson: Bi Centennial #506
Photo courtesy Mike Herman Family
Delivery Expected Early 2024
Details:
RS-3 units #4115, #4106, #4107, #4113, #4122, #4112, #4119, and #4128 were rebuilt by Morrison Knudsen into RS-3m units (numbered #501-508, respectively) between December of 1975 and March of 1976. The locomotives were re-engined with the 2,000 horsepower ALCo 12-cylinder 251C engine, and the long hood was raised six inches to accommodate the larger engine. The dynamic brakes were also moved to a box behind the cab.
HO 1937 AAR 40Ft Boxcar - CP5/5 Ends - Undecorated Car
Includes all appropriate optional parts
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Ice Skaters (6 pkg)
Details Ice Skaters
Now, Off to the Ice!
The NOCH H0 winter figures -Ice Skating- should not be missing from a wintery model landscape! In winter, there are many types of sports that draw people outdoors – skiing, sledging, ice skating, snowboarding, tobogganing, snowshoeing and much more. All of these are popular winter attractions that should not be missing on a snow-covered landscape.
Ice skating on the slippery ice is fun for everyone and this joy should not be missing on a diorama during the cold season! Because it makes everyone happy.
HO Scale Freight Car Grab Irons - 18Inch Curved for Tank Cars - pkg(12)
HO 60ft Hi-Cube Plate F Boxcar - TBOX #889483
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
3/8 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 3/8 inch
HO GMD SD40-2W - DC/DCC Ready - Canadian National (Website) #5335
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
Assembled w/Dual Heads and 6 Micro LEDs - Left Hand
HO Scale - Scenery Accessories
Modern Left Hand Block Signal (Dual Heads)
Prototype Information:
Based on an extremely common design, this dual-head modern block signal can be seen throughout the country on numerous -Class 1- railroads.
Model Information:
Like our Modern Cantilever Signal Bridge, this all-new block signal features two operating signal heads (a total of 6 separate, micro LEDs!), super-fine detail, etched-metal components and 100percent scale fidelity; this model is an asset to any modern HO Scale railroad!
Features:
- 100percent Assembled!
- Two Operating Signal Heads!
- Extremely Fine Detail
- Durable Plastic Construction
- Etched-Metal Handrails & Walkways!
- Extremely Accurate
HO GMD SD40-2W - DCC & Sound - CNNA (Non Dynamic Map/ Oper. Strobe Lites) #5362
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
Tru Color Paint - Acrylic - CP Rail Action Yellow - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Scale CM&Q GMD SD40-2F #9014
Ready To Run and Detailed. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, operating class lights, window glass, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC, DCC/Sound version features LokSound Select decoder.
HO RTR 53Ft Platewall RoadRailer Trailer - Norfolk Southern (Triple Crown) #463509
Norfolk Southern
Triple Crown Medium Logo
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
All-New bluetooth controlled Tsunami2 DCC Sound Decoder - Baldwin and other Diesel Locomotives
Blunami will change the way you enjoy the model railroading hobby
The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.
Currently the app is only available for Apple iOS devices (versions 8 or newer). The app offers an easy graphic interface to adjust all Blunami settings and features with drop-downs and slider bars. All programming can be done through the app, as well as with your DCC system. You no longer need to understand CVs or own a command station to run your trains!
HO Greenbrier 7550 cf 60' Plate F Boxcar - LRS #141087
Aurora Miniatures North America Inc. is proud to offer the HO Greenbrier 7550 cf 60? Plate F Boxcar, in multiple road name-specific and era-specific detail variations. The replica of this iconic 21st century 60? boxcar shares the same epic design philosophy and attention to detail as our previously-released 50? version. No other model train manufacturer?s previous attempts come close to matching the Aurora treatment! DO NOT SETTLE FOR SECOND BEST? AURORA MINIATURES IS #1!
Model Features:
The ultimate, end-all HO scale model of this popular boxcar!
Based on multiple variations of the 60? Plate F boxcars built by The Greenbrier Companies from 2003 to present day.
All-new model, meticulously designed using various prototype resources with unrivalled accuracy and attention to detail.
Highly detailed, injection-moulded plastic body with accurately rendered detail variations.
Separately applied ladders, handrails, grab irons, coupler cut levers and air hoses.
Fully replicated underbody details: control valve, two-sided release road with mounts, empty/load sensor, diagonally mounted air reservoir, brake cylinder, low-mounted brake rods, full piping details connecting all components.
Separately applied vertical wheel handbrake with release lever, handbrake chain and bell crank on B-end.
Near-scale size draft gear box with side key detail and cushion detail.
Aurora-designed 100-ton roller-bearing freight car truck system with sideframe variations, fully replicated bolster & center plate detail, side bearing and brake beams.
NMRA RP-25, Code 110, machined metal 36? wheelsets featuring rotating bearing caps, prototypical wheel contour and axle tapering.
Rotating ?Timken? or ?Brenco? bearing caps, per prototype.
Aurora Janney scale head couplers installed.
Precision painting and lettering.
Multiple road numbers offered for each paint scheme.
HO RTR SW1500 Switcher - DCC & Sound - Wisconsin Central #1568
ETA: January 2023
Detailed Information
WC FEATURES:
Weed Cutter style plow
MU hoses
Whip style antenna
Flexicoil Trucks
Full Cab interior
All-weather cab window
1,100 gallon fuel tank
In the late 1990s Wisconsin Central purchased 3 ex-SP SW1500s from the Indiana Harbor Belt Railway. These three units were refurbished and repainted in WC colors.
SW 1500 LOCOMOTIVE FEATURES:
Detailed cab interior
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Drop steps unless noted
MU stands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Exhaust stacks
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
Printed numberboards
Fine scale handrails
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
HO GP9 - DCC & Sound - Great Northern #690
ETA: May 2023
Detailed Information
GN FEATURES:
Winterization hatch with horn mounted on top
Long hood-forward operation
-Nail- style antenna
GN style fuel tank skirts
In 1967, Great Northern introduced a new paint scheme, consisting of blue, white, and dark grey-green. Known as the Big Sky Blue scheme, it took its name from an unofficial nickname for the state of Montana. Several of GNs GP9 locos received the treatment as depicted here.
In 1970, GN was merged with the other Hill roads to form Burlington northern; however, the Big Sky Blue painted units survived for some time after with a simple BN patch.
ROAD NUMBER SPECIFIC FEATURES:
#682
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#683
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#688
Dynamic brakes
bell mounted on long hood
#690
Dynamic brakes
bell mounted on long hood
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and ?printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch ? Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 60ft Flat Car - OTTX/Red Logo #92008
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
Tangent Scale Models PS4750 Covered Hopper- MKT- Original 12-1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
MKT Original 12-1979 in the eye-catching green scheme with the large yellow MKT painted on the flanks of the car. Like our BN models, the Tangent PS4750 is the only model on the market to match MKTs one and only order of PS4750s, from the jacking pads, brake system, roof hatches, etc. Check out the prototypical Ellcon-National Peacock D-1600 hand brake and the Brenco-3 style rotating roller bearing caps!
N Budd RDC-1 (Ph 1) - DC/Silent - ATSF (Delivery) DC-191 + DC-192 (2 Pack)
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height
HO PROCOR 20,000 Gallon General Purpose Tank Car - CN - Company Service / Era: 1985+ - (6 pkg)
80350, 80351, 80354, 80362, 80370, 80376
The Rapido Trains HO scale Procor GP20 Tank Car features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Photo-etched metal walkways
Detailed vent stacks, loading hatches, air tanks and braking equipment
Metal knuckle couplers
Early style features 70-ton trucks with 33in wheels and an exposed drain valve
Late style features 100-ton trucks with 36in wheels and a reinforced drain valve housing
HO Farmers Market with Accessories.
HO Dash 8-40CM - DCC & Sound - BC Rail: R/W/B w/ Frame Stripe #4609
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX #16084
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Trainman HO Thrall 4750 Covered Hopper - Midwest Railcar (Ex-Rock) #462636
Features:
-Weighted body
-Equipped with AccuMate Knuckle Couplers
-Trucks equipped with free-rolling metal wheels
-Accurate painting and lettering
AccuMate couplers are made under license from AccuRail, Inc.
Structure Signs - Industrial - Waterslide Decal
1960-80
HO 60ft Hi-Cube Plate F Boxcar -Burlington Northern Santa Fe
Product Information
Bring your freight car fleet up to date in minutes with the Walthers Mainline(R) 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO EMD SD70ACU - DCC & Sound - Canadian Pacific CP (Two-Tone Gray) #7023
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Code 70 Nickel Silver DCC-Friendly #4 Turnout - Right Hand
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 70 rail! Combining great looks and great performance in a complete system, each item comes fully assembled and features:
- Matches 100-pound rail used on secondary main lines, branches, yard leads and sidings
- Narrow width ties molded in realistic dark brown with enhanced wood grain detail
- Fine profile molded spike and tie plate details on each tie
- Spike-mounting holes positioned next to the rail
- Molded starter points on underside of ties for Track Nails (948-86103, sold separately)
- Custom formulated nickel silver rail for outstanding electrical conductivity
N Scale AutoFlood III RD Coal Hopper - CEFX #600482
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO 50ft NACC Boxcar - Alumax #50189
MODEL FEATURES:
- Three road numbers
- Applied metal grab irons and etched end platforms
- Pullman Standard or Superior plug doors
- Pullman Standard or Stanray (Superior) roof (to match prototype)
- Ready-To-Roll 70 ton trucks
- Machined 33 inch metal wheels with RP25 contours
- Body mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Minimum radius: 18 inches
Enamel Product.
A new high quality enamel product, developed for scale aircraft models, with an improved flow for easy creation of depth, and emphasis of surface detail. Forget complex mixes or infinity of colors. This product is perfectly suitable for aircraft models which are painted in a white color, or carrying winter camouflage schemes.
HO Enterprise 2-Bay Covered Hopper - Penn Central PC (6pkg) #1
6-Pack includes the following numbers, all individually packaged: #881379, #881352, #881497, #881559, #881829, #881832
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO SD70M - DCC & Sound - Ontario Northland/ONT Flared #2120
Detailed Information
ONT FEATURES:
Ex-NS
EMD deck mounted front and rear ditch lights
PTC antenna array
Late 4-panel radiator body
Late sloped EMD cab nose
Small EMD front plow
Late EMD trucks with exposed bearings
The Ontario Northland Railway is operated by the Ontario Northland Transportation Commission, part of the government of Ontario, Canada. During late 2022, ONT purchased a small batch of ex-NS flared SD70Ms. As of recently, only 2 have been repainted so far. We are offering both as new additions to your model railroad!
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - DEAX #11133
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO EMD SD70M-2 Diesel - DCC & Sound - New Brunswick Southern Railway (Eastern Maine) #6404
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
NBSR FEATURES:
Former NS units
Front and rear ditch lights
PTC antennas
The New Brunswick Southern Railway is a Canadian short line which, combined with its sister company Eastern Maine Railway, connects Saint John, New Brunswick, with Brownville Junction, Maine. A sister company, Maine Northern Railway operates a separate 258 mile line. In 2021, a group of six former Norfolk Southern SD70M-2 locomotives arrived on the property. Painted green and yellow, each component roads
name is on two locomotives; all are owned by the New Brunswick Southern.
ROAD NUMBER SPECIFIC FEATURES:
#6401 New Brunswick Southern lettering
#6402 New Brunswick Southern lettering
#6403 Maine Northern lettering
#6404 Maine Northern lettering
#6405 Eastern Maine Lettering
#6406 Eastern Maine Lettering
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Evergreen Scale Models - Opaque White Polystyrene T Shape .056In x 14In (4 pcs pkg)
HO 66ft Bulkhead Flatcar - CNIS (Mineral Brown) #621024
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
HO 85ft General American G85 Flatcar - GTTX (Brown) #300316
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
Bi-Level Auto Racks - Ferromex Gray on Gray TTGX Flat Car #705653
All are Ready-to-Run.
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene-
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage.
HO 100-Ton Open Hopper - Penn Central #480624
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
Fine Turf - Earth - Bag (21.6 in3)
Use Earth Fine Turf to model the terrains surface and low ground cover. Highlight and accent landscape to add color variations. It is colorfast and blends naturally with other foliage. Use for any scale.
Individual bag provides enough Fine Turf to create realistic landscape on various areas of your layout.
72Ft Centerbeam Flatcar with Standard Beam - Ready to Run - Southern #601086
Product Information
Shipping lumber by train is easy for your HO railroad with a fleet of WaltherMainline 72Ft Centerbeam Flatcars on the job! Designed to speed loading and unloading, these bigger cars entered service in the 1980s and quickly became a favorite with shippers and customers. These nicely detailed models are based on earlier cars built with oval cut-outs (popularly known as -opera windows-) on the centerbeam to reduce overall weight, which are still in service with a wide range of railroads and lumber producers. Other features include:
Limited edition - one time run of these roadnumbers!
Heavy die-cast metal underframe for excellent tracking
Correct 36In turned metal wheelsets
Proto MA metal knuckle couplers
32oz Shaker Forest Green
Bushes make excellent ground cover or tree foliage.
1. Apply Scenic Glue (S190) to layout. Press Bushes into glue allow to dry.
2. To use for tree foliage, bend and twist Woodland Scenics Tree Armature into a realistic, three dimensional shape, brush on Hob-e-Tac and dip into Bushes.
Enamel Paint - Panzer Grey Streaking Grime - 35mL
A very special product for doing streaking grime effects over dark grey surfaces such as German vehicles painted with Panzer Grey. Also suitable for other effects such as add chromatic richness to any piece or surface. This enamel should be mixed well and then painted in vertical lines on the sides of the model. After, you just blend with a clean brush moist with Enamel Thinner to produce some great realistic streaking grime effects.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CMBX #1601
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Plastruct Butyrate Half Round Profile 3/16 (4pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
GRAY
OUTSIDE DIAMETER (O.D.)
3/16
4.8mm
INSIDE DIAMETER (I.D.)
3/32
2.4mm
THICKNESS IN INCHES
3/64
THICKNESSS IN MM
1.2mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
HALF ROUND PROFILES Use for the top housing unit of corrugated roll-up doors, large scale gutters and bannister railings, and decorative trim for inside and outside buildings.
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200149
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
HO RTR 40Ft Single-Door Steel Boxcar - Chicago, Burlington & Quincy (FW&D) #8144
(Chinese Red, black, white)
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. Check out the entire line of Bowser HO Scale ready-to-run boxcars.
HO 36Ft RTR 3-Dome Tank Car - UTLX #1303
Product Information
Add authentic cars to your steam- or diesel-era layout with these 36Ft 3-Dome Tank Cars from WalthersMainline! Serving a wide range of both producing and consuming industries, these cars were actually three tanks in one, ideal for handling smaller amounts, and a greater variety of product at once. Features of these cars include:
One time run of these roadnumbers, limited quantity available - order now!
Prototypes hauled petroleum, chemicals and similar liquid loads in three compartments
In service from late 1920s to 1960s
Detailed underbody with AB brakes
Fully assembled
Correct 33inch turned-metal RP-25 wheelsets
Proto MAX metal knuckle couplers
HO EMD FT Booster - DC/Silent - AT&SF (Passenger Scheme) Unnumbered
Santa Fes FTs were equipped with couplers at both ends of each unit. This allowed the Santa Fe to run
FTs in A+B+B (or even A+B+B+B!) sets. Our individual coupler-equipped FT B-units allow modelers
to easily recreate these lash ups for the first time!
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
Pure Blue Mini Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO EMD SD9 - DC/Silent - Burlington Northern #6229
Burlington Northern
- Former CBQ units (Phase IV, first time for a plastic model!)
- Correct 5-step, BN walkway
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Early - Staley #35076
HO Chemical Tankcar - Staley (3pkg)
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Wireform safety handrails
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 15inch
HO 50ft PC&F, 8ft & 6ft Boxcar - Wisconsin Central #12084
MODEL FEATURES:
- Separate wireform grab irons, etched metal coupler platforms, and/or etched metal roofwalk
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- Weighted for optimum performance
- Separately applied wire grab irons where applicable
- Trucks with animated rotating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Body-mounted, McHenry scale double-shelf knuckle couplers
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
- Minimum radius: 18 inches
- Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
N Scale Rib-Side Single-Door 50Ft Boxcar No Roofwalk - CN Inspection Car #412091
Built in 1977 by FMC for Hartford & Slocomb Railroad, these 50Ft boxcars with Barber Roller Bearing trucks were later operated by the New Orleans Public Belt. Eventually, Union Pacific received the cars and painted them in their boxcar red scheme, with ex-Missouri-Kansas-Texas -BKTY- reporting mark and GATX lettering.
HO GMD-1 - DCC & Sound - Canadian National (1900s Noodle w/ Red Cab) #1904
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
HO 40Ft Hi-Cube Dry Containers - CAI Leasing (3pk)
3 pack road numbers include : CAIU 872760/874983/881834
Body: Type A
Door: Type B
Latch: Type A
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Trailer Train #91921
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
GP39-2 Diesel, DCC & Sound - CSX/Ex-RDG Patch #4317
ETA: October 2021
Detailed Information
CSX FEATURES:
All Ex-Reading. Electrical cabinet door on engineers side
YN2 repaints feature: Removed nose class lights, K5 horn, front ditch lights, EMD small plow, cab rain gutters, and our most current approved CSX colors.
CSX patched units feature: Removed nose class lights, correct horn and patching per road number, EMD small plow, and cab rain gutters.
In the early 1990s, CSX acquired ex-Reading GP39-2s for system-wide service. These locomotives were perfect for local and switching duties. A few of them were merely patched with CSX lettering and renumbered before eventually being repainted into CSXs -YN2- scheme. They are still being used today with most being repainted into CSXs latest scheme.
ROAD NUMBER SPECIFIC FEATURES:
Replaced CSX K5 chime horn
original Blomberg B trucks
unique patched art and faded paint effect.
LOCOMOTIVE FEATURES:
All units are powered
Heavy die-cast frame for greater traction and more pulling power
DCC-ready features Quick Plug plug-and-play technology with both 21-pin connector (DCC-Ready only)
Factory installed SoundTraxx Tsunami2 sound and DCC decoder (DCC+sound units only)
Tsunami sounds are compatible with both DCC and DC operation (DCC+sound units only)
Genesis driveline with balanced five pole skew wound motor and dual flywheels
Directional constant lighting-featuring LEDs; headlight brightness remains constant
Scaled from prototype resources including drawings, field measurements, photographs, and more
Separately applied photo etched metal and injection molded detail parts:
Cab interior
Coupler cut levers
MU and Trainline hoses
Windshield wipers
Lift rings
Wire grab irons Sander lines
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body mounted McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Detailed Blomberg-B trucks with prototype-specific wheel bearings
Replacement parts available
Minimum radius: 18inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 decoder pre-installed
Sound units operate in both DC and DCC
Individual sound boards installed in both A and B units (sound units only)
All functions NMRA compatible in DCC mode
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Slow speed control
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Lighting effects such as beacons and Gyralight where prototypically accurate
A and B units often include sound decoders with different default pitch shift, so MU lashups sound unique
PROTOTYPE SPECIFIC INFORMATION
In the decade between 1974 and 1984, EMD produced the GP39-2 for seven North American railroads. The basic design followed most four axle road diesel switchers for the time. Borrowing improvements from the GP38-2 and GP40-2 designs, this mid-horsepower road switcher utilized a turbocharged 12-cylinder EMD 645E3 diesel engine for its prime mover. With 4 fewer cylinders, the smaller engine provided a distinctive long hood on the phase II and phase III bodies, where the clean room/engine compartment doors were set back from the cab further than predecessor locomotives.
Sensitivity to fuel economy in the 1970s justified the GP39-2 in the locomotive market. It also laid the ground work for EMD to start exploring locomotive designs that utilize engines with larger piston displacement yet possess fewer cylinders. This approach has become the foundation to modern locomotive technology.
Norfolk Southern NS #6952
DCC-ready features Quick Plug, plug-and-play technology with 21-pin connector
- LED Headlights
NS built 4000 gallon fuel tank
Roof mounted sinclair antennas
NS designed snow plow
Different cab panel louver arrangement per prototype
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
LED lighting including:
Headlights
Illuminated deck mounted ditchlights front and rear
Numberboards
Ground lights above front trucks
Long hood mounted Nathan 5-chime air horn
Sunshades
Rounded or rectangular cab windows per prototype
Flexible rubber multiple unit (MU) hoses with silver glad hands
Flexible rubber front and rear trainline air hose with silver glad hands
Step wells feature seperately applied individual see through photo-etch steps
Coupler cut levers with loops
Anticlimbers
Safety tread on the walkways
Anti-glare panel painted on the nose
Factory applied photo-etch windshield wipers & lift rings
See through and tinted cab windows
Detailed and painted cab interior with control stand, display screens, detailed crew seats
See-through radiator fans
Factory installed wire grab irons
Fine-scale handrails for scale appearance
Underframe mounted E-bell
HT-C trucks with Timken bearings
McHenry scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18 inch
Recommended radius: 22 inch
Earth Color Liquid Pigment - 4 Ounce Bottle-Stone Gray
This is an amazingly simple system for coloring terrain and plaster castings such as rocks, retaining walls, culverts and tunnel portals. Beginners get craftsman-quality results. The Earth Colors Liquid Pigment Concrete.Use to stain rocks, plaster castings and terrain. Water soluble colors can be diluted and blended in endless combinations to model a variety of scenic effects. Extremely concentrated for economical use, each bottle includes four ounces of liquid pigment. (Photo shows plaster rock casting, sold separately, stained with this color.)
Walthers Mainline 50 Ft Post Mechanical Reefer Erie Lackawanna No.5018
- based on cars built by Burlingtons Havelock Shops
- Diagonal panel roof with separately applied exhaust stack
- Detailed plug doors, refrigerator inlet and outlet grilles
- Late improved Dreadnaught ends
- See through running board
- Highly detailed underbody with fuel tanks and brake gear
- 70 ton roller bearing trucks
- Correct 33Ft turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO RTR 33,900 Gallon LPG Tank/ Late - PROX #31177
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Three different body phases: early, flat panel, and late
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports and tank saddles
Photo etched metal walkways and end platforms
Wire safety rails and end handrails
Printed placards
Full underframe detail featuring body mounted brakes or truck mounted brakes as per prototype
Body-mounted, McHenry scale double-shelf knuckle couplers
100 ton trucks with animated rotating bearing caps
Machined metal wheels with RP25 contours
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Weighted for optimum performance
Minimum radius: 18inch — Recommended radius: 22inch
Spray Can - Orange (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
1/4 inch OD Round Aluminum Tube 0.014inch Thick x 12inch Long
Round Aluminum Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 1/4 inch
N Scale Roller Bearing Trucks w/ long ext. couplers (1pair)
HO 68Ft Railgon Gondola - Southern Pacific #365061
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO Steel Grade Crossing (2/pkg)
Product Information
Realistic looking and ready to place. Injection molded plastic steel plates are notched to fit over rail spikes. Includes pre-cut shims to correspond to proper code. Two crossings in each package.
Craft Plywood Sheet - 12 x 12inch x 1/8inch Thick - Single Piece
Perfect for painting, staining, stenciling and wood burning
Cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use
1/8inch (.33cm) Thick x 12 x 12inch (30.4 x 30.4cm)
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov
HO SD70M - DCC & Sound - PRLX ex CSX #4685
CSX & PRLX FEATURES:
CSX units are former EMD demonstrators. In a roster increasingly dominated by GE, a group of these venerable units have been sold to Progress rail, returning the units to lease service once again.
Early Cab with nose window
Customer-installed GPS dome included in box
K5LA horn
Spare knuckles on rear pilot
Appropriately-colored MU cables
Early 5000 gallon fuel tank
Large or small snowplow per prototype
Illuminated front ditch lights; flash when horn is activated on DCC and Sound Version
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO C-20 ICC Caboose w/Lights - DCC & Sound - Norfolk & Western #500854
ETA: April 2022
Detailed Information
The ultimate detail with the best Genesis features.
International Car Co. began specializing in caboose production as early as 1941. When the railroads entered the 1960s, many needed to replace their aging, in some cases home shop built, cabooses. International Car responded with a product that could be tailored to each railroads specific needs. Using quality components and modern engineering, ICC became a leading name within the industry.
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
NW FEATURES:
N&W C-20 Class caboose
N&W Blue scheme with -Hamburger- style logo
Friction Bearing Trucks
Air horn (Functions in DCC)
Propane tank and basket
Functioning interior lights in DCC
ICC CABOOSE FEATURES:
Better than brass detail including roadname and road number specific detail and laser-sharp painting and printing
Interior seating for the addition of crew figures.
See-through end platforms and steps
Flush window glazing
Wire-form grab irons
Caboose trucks with animated rotating bearing or static friction bearing caps
Axle generator details
Body-mounted McHenry scale knuckle-spring Couplers
Machined metal RP25 profile wheel sets
Fully-assembled and ready-to-run out of the box
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Separate wireform grab irons, etched metal coupler platforms
Coupler lift bars, trainline hoses, brake hoses, and hardware
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Weighted for trouble-free operation
Multiple road numbers
Minimum radius: 18inch
LED LIGHT EQUIPPED FEATURES:
LED lighting for long life and reliable operation
On-board DCC Decoder by NCE – Operates in DCC and Analog (DC) with lighting functions controllable in DCC
Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
(not all cars have marker lights)
LED Interior Lights
All functions NMRA compatible in DCC mode
SOUND EQUIPPED MODELS ALSO FEATURE:
Soundtraxx Tsunami SoundCar decoder w/ included sounds:
Air horn or conductors whistle as appropriate
Clickety-clack with optional wheel flat spot sounds
Brake set/release sounds including retainers and brake squeal
-Big Hole- emergency brake application sound
Handbrake tie-down/release
Adjustable flange squeal
Air, horn, and bell sounds work seamlessly with Soundtraxx locomotive sound decoders
Supports Advanced Consisting in DCC
Full DCC functions available when operated in DCC mode
All functions NMRA compatible in DCC mode
HO Double-Track Cut-Stone Viaduct - Variable Height
Features:
Available in single track or double track widths
Kit contains single arch and two half-arch ends - combine kits for longer applications
Can be used w/o pier units for lower heights such as in urban settings
Concrete double track viaduct also suitable for O scale single track applications
Length - 18inch
Width - overall (Single) = 3 1/4inch, (Double) = 5 1/4inch
Width - btw. walkways (Single) = 2 1/8inch, (Double) =4 1/8inch
Height (w/ piers) - to deck = 9 5/8inch, to top of railings = 10 3/8inch
Height (w/o piers) - to deck = 3 1/2inch, to top of railings = 4 1/4 inch
HO Scale H1b Hudson Steam - DC/DCC Ready - Canadian Pacific (Spans the World) #2815
-Late walkway w/smoke deflectors
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO SD60 - DCC Ready - SOO Line #6054
MODEL FEATURES:
Locomotives come with railroad-specific details including: Operating beacon (in DCC/Sound version), horn, winterized hatch, antenna, handrails, etc.
SPECIFICATIONS:
DCC: Ready/21-Pin NEM
PROTOTYPE MANUFACTURER: EMD
Axles: 6
LIGHTED: LED Lighting
PROTOTYPE AND BACKGROUND INFO:
In 1984, Electro-Motive (EMD) introduced the 60 series locomotive. These had many improvements over the earlier models including features such as: New and improved EMD 710 power plant producing 3600 HP, wheel slip control, computerized cabinet replacing the older and unreliable components.
This design spawned into many other upgrades within its class like the modernized wide cab, Isolated cab, and even the start of AC traction technology.
These locomotives were suited for just about any mainline service that could be thrown at them. The model was fairly popular with class one railroads, with Norfolk Southern purchasing the most at 151 units. Most of them are still in service today. Norfolk Southern in 2010 started a large full rebuild program of their SD60s (including purchasing cores from other sources) into SD60Es, which rebuilt them from the frame up with new electrical components and a newly designed cab to improve visibility and forward crash impact safety.
Fascia Mount Switch Control Device for the DS74
48Ft All Purpose Well Car - TTX (Next Load Any Road) #456354
Features:
Floor with correct ovals and cut-outs.
Two hitches
Etched walkways
Four IBC bins.
Detailed brake components
Prototypically accurate paint schemes
Recommended 24inch radius
HO Siemens Venture Passenger Car - VIA Rail Canada Business #2700
The Siemens Venture is the latest generation of medium-distance passenger railcars for North America. Constructed by Siemens Mobility in California, the Venture cars currently see use on Amtrak state-supported services in the midwest and California, while VIA Rail Canada has introduced the series on corridor services in eastern Canada. The Bachmann Venture Cars have been developed in collaboration with Siemens, using original design documentation to ensure prototypical accuracy.
Features include:
Fully furnished and lighted interiors
Road-specific exterior configurations
Separately-applied details
Magnetically operated E-Z Mate Mark II couplers
Blackened machined metal wheels with RP25 contours
Optional Close-couplers included
Performs best on 18inch radius curves or greater
HO RTR 48Ft Containers - CSX #2 (3pkg)
Detailed Information
MODEL FEATURES:
Fully assembled
Easily stackable
Each container is individually numbered
Goes perfectly with the Husky Stack Car
HO Scale SD30C-ECO - DC/DCC Ready - Canadian Pacific #5047
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
9 Assorted Horses and Cattle - pkg(9)
Bring your HO farm scenes to life in minutes with this ready-to-use figure set! Molded in realistic poses and hand-painted, this set includes nine assorted horses.
Kadee 213 Gearboxes & Sleeves - 24 pcs
included in 20-Series Coupler kits
20-Series Boxes with .055in.ID & .100in.ID bushing/sleeves.
24 each.
Tru Color Paint - Acrylic - Seasoned Brown Wood- 1oz
SD70MAC Diesel, w/ DCC & Sound - PRLX #9562
Era: 1994+
Primed For Grime
EMD SD70MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
First time ever with front and rear Rubber MU hoses, Trainline hoses, Cut levers, and rear Spare
PRLX FEATURES:
Progress Rail ended up with quite a few ex BNSF units when their lease expired. While roaming the whole system, they were picked up by NS and CSX as extra lease power and can been still seen operating today.
LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PROTOTYPE SPECIFIC INFORMATION
During the early-1990s, EMD teamed-up with German engineering company Siemens to produce a freight locomotive that was capable of providing AC-traction drive currents, and thus providing a high-horsepower rating and lower fuel consumption for railroads which had an ever-increasing demand for saving fuel consumption by using a lesser amount of units to haul most of their trains.
The EMD SD70MAC was first introduced in early 1993, and began production later-on during the same year after numerous tests and improvements were made. Since then, the EMD SD70MAC has been a staple of heavy freight lines across the country.
Walthers Kit -
-Typical of main facilities housing clay processing, mixing and molding operations
-Great for steam or diesel-era operations
-Highly detailed brick walls and arched windows with realistic thin frames
-Large one-piece brick smokestack
-2 large and 5 small brick stacks, with 12 pallets included for added realism
-Molded in two colors and clear
12-3/4 x 6-1/2 x 7in 31.8 x 16.2 x 17.5cm Cornerstone 4102 HO Brickworks
HO Champion Brake Wheels - Red Oxide (8pcs)
8 brake wheels for freight cars.
N Scenic Accents(R) Figures -- Snowball Fight - 6 Kids, 1 Snowman, 3 Piles of Snows
Vallejo 73826 - Model Wash - Weathering FX - Mud and Grass - 40mL Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Blue Grey is recommended for vehicles with a Panzer Grey base color, as well as all vehicles with a similar grey base.
HO RTR SD40T-2 - DCC & Sound - Southern Pacific (SP 1990s) #8370
SP 1990s Era ROAD NUMBER #8370 FEATURES:
Red welded/removed nose gyralight
Snoot nose
relocated Nathan P-3 Horn
Standard forward ditchlights
Cab roof mounted bell
Faded paint
Missing/faded body and nose lettering
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Separately applied air tanks
See through cab windows
Welded ECAFB
Photoetch windshield wipers
LED Lighting
HTC truck sideframes
All-wheel electrical pickup
See-through dynamic brake fans
-Mushroom- nose vent on right side
Separately applied wire grab irons
Fully assembled and ready-to-run
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox speific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body
Painted and printed for realistic decoration
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for troublefree operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Replacement parts available including motor brushes
Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
Patches applied and shaped per road number matching each corresponding side to the prototype
Duplicated look and feel of -In Service- equipment; -Tattered and Torn- just like the real thing
Some Prime for Grime models feature paint scheme variations
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard Econami Sound by SoundTraxx
Sound units operate in both DC and DCC
Sound units operate in both DC and DCC
All functions NMRA compatible in DCC mode
Full DCC functions available when operated in DCC mode
Some functions are limited in DC
Engine, horn, and bell sounds work in DC
Slow speed control
All functions NMRA compatible in DCC mode
CV chart included in the box
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - Santa Fe (ATSF) #350037
Product Information
Serve a wide range of HO industries with the 37ft 2980 Cubic-Foot Two-Bay Covered Hoppers from WalthersMainline. Based on prototypes introduced in the late 1980s, they can be found hauling cement, fracking sand, roofing granules and similar loads. Features of the layout-ready models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from late 1980s to the present
Separately molded and applied hopper gates
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
HO RTR SD39 - DCC & Sound - Southern Pacific #5296
This locomotive is Primed-for-Grime!
SP FEATURES:
By the end of the SP in the mid 90s, a small handful of SD39s were used around the LA area, known as -LA Basin Haulers-. They were used for heavy switching duties between Long Beach and West Colton, sometimes venturing off to other areas. Two of the numbers offered (5296 and 5298) were renumbered units to avoid conflict with similar numbered Rio Grande SD45s. They were assigned UP numbers, but were all retired before they could be renumbered. All 3 numbers feature unique faded paint and lettering effect per unit number, working beacon with DCC, large ballast boxes, removed gyralights, modified L-Window cab, rear brake wheel, roof mounted bell, large front plow, and P-3 horn.
ROAD NUMBER SPECIFIC FEATURES:
#5296
Ex SP 5315
hi-brake mounted trucks
early inertial grills
faded to red lettering effect
patched numbers
#5298
Ex SP 5317
hi/low brake mounted trucks
late inertial grills
faded white lettering effect
patched numbers
#5316
Still in its original number
hi-brake mounted trucks
late inertial grills
faded white to red lettering effect
Detailed Information
SD39 SERIES LOCOMOTIVE FEATURES:
Separately applied air tanks
Coupler cut levers
Rubber MU hoses
Photo-etch stainless steel windshield wipers
Fine scale handrails
Non-sound version features 21-pin NEM DCC plug
See-through dynamic brake and radiator fans
Curved radiator fan grab iron
Exhaust stack
Frame-mounted bell (unless noted)
Detailed 4000 gallon fuel tank (unless different capacity is noted)
Flexicoil-C trucks with high or low brake cylinders (per prototype)
McHenry scale knuckle spring couplers
See-through cab windows
Bi-directional LED lighting
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Painted and printed for realistic decoration
Highly-detailed, injection molded body
Minimum radius: 18inch
Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard Econami sound decoder by Soundtraxx
Engine startup sound sequence
Dynamic brake sound or Non-Dynamic Straight to idle on F4
Extra prime mover and horn sounds exclusive to Athearn
Sounds recorded from a real EMD 12-645E3
Multiple bell sound files user configurable via Configuration Value (CV)
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Current Keeper ready with on board expansion plug
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via CV changes
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Late Script Logo) (6pkg)
Road Numbers Included: 286292, 286313, 286334, 286339, 286363, 286387
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
HO Class D10g 4-6-0 - DC/Silent - Canadian Pacific #926
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
Vallejo 73801 - Model Wash - Weathering FX - Russian Splash Mud - 40mL Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Blue Grey is recommended for vehicles with a Panzer Grey base color, as well as all vehicles with a similar grey base.
HO Alphabets - Railroad Roman - Silver - Waterslide Decals
N Scenic Accents(R) Figures -- Shootin Hoops
HO GE C36-7 - DC/DCC/Sound - Burlington Northern #5057 (Whiteface Scheme Cascade Green, Black)
The Rapido Trains HO Scale C36-7 is based on General Electric's higher-horsepower six-axle Dash-7 offering, with a 16-cylinder 3,600 horsepower or 3,750 hp rating (compared to the C30-7's 3,000 hp.) Built between July 1979 and February 1989, over 599 total units were produced. Of those, 129 were domestic orders for Conrail, Missouri Pacific, Norfolk & Western, and Norfolk Southern. Another 40 were made for Ferrocarril del Pacifico and National de Mexico. Lastly, 422 were made for China with many significant export differences, and the final units produced were 8 for Comilog in Gabon. Despite smaller production numbers, the C36-7 was ordered at key moments that resulted in it representing the evolution of GE s Dash-7 line more than the popular C30-7s. When GE launched "1977 Series Locomotives" (Dash-7s) in, they cataloged a C30-7, C33-7, and C36-7. Railroads immediately ordered C30-7's for booming coal service. The C33-7 was never ordered. The C36-7 was ignored until 1979, when National de Mexico and Ferrocarril del Pacifico placed orders. These export C36-7s for Mexico were essentially identical externally to C30-7s, which were being built by the hundreds at the time. Ferrocarril del Pacifico's units were repainted into striking two-tone blue FNM paint and worked both freight and passenger service. Of the 40 C36-7s built for Mexico, only one is still in service in 2024 - Ferromex 9336. Incredibly, despite being the last operating C36-7 (among few remaining operating C30-7's) 9336 was repainted in Ferromex's classy "Diet Coke" scheme in 2023. The Rapido model features railroad and era-specific details, etched-metal grilles and details, roadname-appropriate lighting packages and Rapido semi-scale knuckle couplers on both ends. The smooth-running drive features a five-pole motor with dual flywheels, backed up with the MoPower capacitor system for uninterrupted operation. This standard DC model is DCC ready with a 21-pin interface for easy conversion. The GE C36-7 is part of the line of Rapido Trains HO Scale locomotives.
The Rapido HO Scale C36-7 Locomotive features:
Headlights and rear lights
Class lights, marker lights, or ditch lights, where applicable
Step lights
Lit numberboards
Full traction motor casing details
Metal brake chain on engineers side
Detailed underbody piping and conduit
Separate grab irons
Rapidos innovative dead straight metal side handrails with plastic stanchions
Detailed cab interior
Lighted control stand
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Sound-equipped units feature ESU Loksound V5 decoders
N Scale Short Barrel Ore Hopper - CN Mineral Brown #346084
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO 85ft General American G85 Flatcar - Erie Lackawanna #8799
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
AK Interactive Wash : Dark Brown
SubTerrain System - Foam Risers (1/2in)
4/pkg - 1/2 x 2-1/2 x 24 inches (1.27 cm x 6.35 cm x 60.9 cm)
Risers are generally used with incline/decline starters to create varying grades on your layout. Risers are easily flexed to form curves and work on plywood or foam bases. To install, pin in place with foam nails and attach with foam tack glue or low temp foam glue gun and glue sticks.
RS Straight Grabs - pkg(16)
HO RTR 48Ft Containers - Rail Bridge #1 (3pkg)
Detailed Information
MODEL FEATURES:
Fully assembled
Easily stackable
Each container is individually numbered
Goes perfectly with the Husky Stack Car
Detroit Toledo and Ironton - DT and I #9625
Key Features
•Fully assembled and ready for your layout
•Upgrades include seperately applied grab irons and stirrup steps
•33†solid nickel silver wheels with RP25 contours operate on all popular brands of track
•McHenry scale knuckle spring couplers installed
HO Wooden Water Tanks pkg(3) - Plastic Kit
Product Information
Rooftop Wooden Water Tanks are as much a part of a city skyline as clouds! Look at any big city scene and youll see tanks perched on the roofs of all kinds of buildings. From downtown offices, stores and apartments, to grimy industries, this Walthers Cornerstone kit is a detail thats perfect for every tall building on your HO Scale layout. Detailed plastic parts look like real wood and are molded in colors. A separate roof and supports are also included. Each kit comes with parts for three complete wooden water tanks.
Three complete tanks
Easy-to-build plastic kit
Great detail for rooftops on larger buildings
Finished model measures:
4inch (10.1cm) Tall
2-3/8inch (6cm) Wide at Walkway
2inch (5cm) Wide at Base
G2 Dash 9-44CW - DCC Ready - Southern Pacific #8192
ETA: March 2022
Detailed Information
SP FEATURES:
1994 as-built appearance
Early (-dog leg-) stepwell gussets
Sinclair antennas
Nathan P3 horn
Large SP plow
SP NOTES:
The SP 8100s were some of the last mainline power delivered to the SP proper. The engines were used on all types of trains, in multiple with other class members of other SP 6-axle power. Many of them survive to this day, albeit repainted into Union Pacific colors.
DASH 9 SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately –painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
HO 60ft PS Auto Box - Norfolk & Western/NW #600415
MODEL FEATURES:
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Fully detailed full cushion underframe
- Full underframe detail: air brake reservoir, control valve,
- Separately applied door closure rods, side ladders, metal grab irons and brake cylinder with plumbing and brake rod details
- etched metal end platforms
- 100-Ton roller bearing trucks with operating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Machined metal wheels
- Weighted for trouble free operation
- Multiple road numbers
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
During the 1960s, Ford Motor Company, Pullman Standard and Santa Fe pooled their resources to develop a standard boxcar to meet the transportation needs of automobile manufacturers in the United States. Delivered in 1965, the Pullman Standard auto parts boxcar is the most prolific example of this type of freight car. It ultimately changed the face of automobile manufacturing and rail transportation.
PRIMED FOR GRIME MODELS FEATURE:
- Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Some Prime for Grime models feature paint scheme variations.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - CIL Monon #9073
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 72Ft Centerbeam Flatcar w/Standard Beam - Duluth, Winnipeg & Pacific #626675
Product Information
Shipping lumber by train is easy for your HO railroad with a fleet of WaltherMainline 72Ft Centerbeam Flatcars on the job! Designed to speed loading and unloading, these bigger cars entered service in the 1980s and quickly became a favorite with shippers and customers. These nicely detailed models are based on earlier cars built with oval cut-outs (popularly known as -opera windows-) on the centerbeam to reduce overall weight, which are still in service with a wide range of railroads and lumber producers. Other features include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1980s to the present
Heavy die-cast metal underframe for excellent tracking
Correct 36inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Model loaded cars in minutes with SceneMaster Wrapped Lumber Loads (#949-3121-series, each sold separately)
Plastruct 90441 N scale ABS 2 in Stair (2pcs pkg)
SCALE
N
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/32
HEIGHT IN MM
2.4mm
WIDTH IN INCHES
7/32
WIDTH IN MM
5.6mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
3
LENGTH IN MM
75mm
USE DESCRIPTION
ABS STAIR Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision injection molded
HO HEP E8A + A Set - DC/ Silent - Canadian National (Executive - Noodle) #102/103
The IC and CN E9A Details Include:
Photo courtesy of Craig Walker
Correct HEP muffler and hatch
Modified pilots
Blanked sides with appropriate grille work
Roof-mounted cooling coils
Non-skirted fuel tanks
Hyatt roller bearing journal covers
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Complete lighting effects headlights, recessed ditch lights in nose, class lights, backup lights, ground lights, cab lights and more. (Not all lighting features will work in DC mode.)
Numerous road-specific detail parts in both plastic and etched metal.
Pink Engineer Strap Hat - Toddler
This is the real McCoy, the most authentic engineer hat ? heavy, hickory striped denim in both blue and pink. Both hats are available in four size ranges: infant, toddler, child, and adult. Each can be either elastic back or snap back. These are the finest engineer hats on the market!
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Orange
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
Fall Colors 3/4 - 2inch 2 - 5.1cm; pkg(38
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors.
HO PC&F 5241 CUFT - Boxcar - Boston & Maine - Single Car #3212
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
BSI- 101- Super Thin 1-3 Sec Glue
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX (Black w/ Black Truck Caps) #16153
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Union X-3 Tankcar - UTLX (1930s Paint) #32679
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO Value Line RTR - 13 Panel Coalporter - NYC (Conrail Quality) #505422
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52R class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Tangent Scale Models HO PS4750 Covered Hopper RREX- Klemme Coop Iowa 4-1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
RREX -Klemme Coop Iowa 4-1979- is our private grain elevator selection in this release of PS4750s. This car is a stunner and our next pink Iowa coop offering, with large Klemme Coop lettering and the smaller Klemme, Iowa underneath. This is a very sharp looking car and goes well with our previous pink car offerings! Details include accurate body-mounted brake hardware with center-tube linkage and Miner Selflok outlet gates.
HO Just Plug Lighted Vehicle - Cool Convertible
Rag-top down and summer in mind, this convertible is ready for a Sunday drive!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
Finishing Enamel - Fluorescent Blue - Bottle (1/4oz)
HO FMC 5503 Double Door Boxcar - Southern Pacific (Ex-GVSR) #246181
Features:
Double Sliding Doors
Wire grabs
Etched parts
Plate C Box Car
X-Panel Roof
HO FM H16-44, With Sound & DCC, Canadian National: Wet Noodle Scheme No.2202
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO EMD SW9 - DC/ Silent - New York Central (NYC As Delivered) #8930
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
TH&B 1951 Chrysler Inspection Car #1 - Unpainted and Resin Cast Kit
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
HO EMD FT A+B Set - DC/DCC/Sound - Great Northern (GN As Delivered) #418-D + 418-C
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO Scale - RTR 60Ft Berwick Hi-Cube Box - Missouri Pacific #269488
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Detailed underbody including full brake gear
Weighted for trouble free operation
Replacement parts available
Machined metal wheels with RP25 contours operate on all popular brands of track
Separately applied wire grab irons and etched end platforms
Machined metal wheels
Body mounted McHenry operating scale knuckle couplers
Minimum radius: 22inch
#1703 Roundhead Stainless Steel Screws 2-56 x 1/8inch- 12pcs
HO 66ft Bulkhead Flatcar - Canadian National (Mineral Brown) (6pk)
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
HO SD75M - DCC & Sound - Santa Fe BNSF #249
Detailed Information
BNSF FEATURES:
Faded paint colors
Small EMD plow
Round deck mounted front ditch lights
Large Sinclair antenna
Early EMD trucks with hidden bearings
Road number specific details and artwork
Part of the original Santa Fe 1994 order, these SD75Ms are depicted as late in their life. Just before they were sold to PRLX, they soldered on looking beaten and battered, but still earning revenue for their owner. Renumbered to the 8200 class in the 2000s, they eventually returned back to their original Santa Fe numbers again, but with BNSF patches.
ROAD NUMBER SPECIFIC FEATURES:
#226
Ex-ATSF 226
small cab numbers
added rear number boards
yellow frame stripes
#231
Ex-ATSF 231
large cab numbers
yellow frame stripes
#249
Ex ATSF 249
large cab numbers
yellow frame stripes
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
TH&B 40Ft steel box - Dry Transfer Lettering Sets - black and white herald; black lettering
yellow car; black and white herald; black lettering
Kit pkg(2)
Part of the Cornerstone Modern Industrial Park series - read more here!
Essential detail found outside modern businesses, homes & industries
Great value builds 90 items including:
6 kinds of transformer cabinets (industrial to residential sizes)
Phone boxes
Electrical cabinets with meters
Residential electric meters
Gas meters with optional mounting brackets
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21012
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
3mm LED - Golden White (6pk)
Dimensions: 3mm (0.12 inch) diameter
Voltage: 3.3 Volts
Golden White LEDs for adding or using the Hyperlight lighting effects. Can be used as LED replacements or in place of bulbs (see your decoder manual). The cathode or minus (-) side is indicated by the flag inside the LED, or by the shorter of the two leads.
HO GE 44 Tonner Phase III - DC/DCC/Sound - Southern (Tuxedo Scheme) #1951
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) #484985
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO EMD SW9 - DC/ Silent - Boston & Maine (B&M As Delivered) #1220
Boston & Maine:
Delivered in 1952
-Trash can- style spark arrestors
Deck mounted side handrails
Hood mounted number boards (road number specific)
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
4785 PS2-CD Covered Hopper - Early End Frame - Penn Central - Green Repaint #886924
Juneco Scale Models Canadian National GP Sunshades (4/pkg)
N Scale 53ft Stoughton Containers - Swift, Set #1 (3pk)
MODEL FEATURES:
- Fully assembled
- Magnetically stackable
- Each container individually numbered
- Razor sharp printing and painting
HO AutoScenes - Suds & Shine
The youngsters are not missing a spot while washing and shining this coupe for a spin down the street.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
Spray Can - Pearl Clear (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Athearn HO - 40ft Ribbed 3-bay Ballast Hopper - New York Central- #1 - 4pack
950089, 950140, 950239, 950363
Removable load
Separately applied wire grab irons and brake wheel
Solid nickel silver wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
5/32 inch OD Square Aluminum Tube - 0.014inch Thick x 12inch Long
Square Aluminum Tube (1 pc)
Outside Diameter: 5/32 inch
Plastruct 91252 Clear Plastic Sheet .030 (2pcs pkg)
0.030 x7 x12 inches
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20186
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Spray Tac - 8 fl oz (236 mL)
Apply plant hues or flowers
Clear matte finish
Fine mist
Water soluble
HO B-50-15 Boxcar - As Built w/ Murphy Roof - Southern Pacific (1931 to 1946 scheme) #14807
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
D13WP Decoder - 1.2 Amp with NMRA 8 pin plug
Dimensions: 1.03 x 0.630 x .185 inches (26 x 16.5 x 4.7 mm)
Features of this decoder:
- Silent Running ,torque compensated motor drive
- Torque Compensation for ultra smooth low speed performance
- Motor rating 3/4 Amp continuous, 1.2 Amp stall
- All four function outputs have lighting effects generators
HO Scale NSC 73Ft Centerbeam Flatcar - BNSF #562935
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
HO - 40ft Ribbed 3-bay Ballast Hopper - New York Central- #950004
Removable load
Separately applied wire grab irons and brake wheel
Solid nickel silver wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO G2 SD80MAC - DCC & Sound - Ex-CR Norfolk Southern #7215
Detailed Information
NS FEATURES:
Former CR units
Faded paint effect and cab number patching per road number
Removed red marker lights
Correct horn per road number
After the 1999 split of CR, a batch of SD80MACs went to NS. They were hastily patched into new NS numbers while keeping the original CR scheme for a while.
ROAD NUMBER SPECIFIC FEATURES:
#7200
Black nose anti-glare patch
5-chime horn
white patch with black numbers.
#7212
Faded to white anti-glare nose patch
Leslie 3-chime horn
Black patch with white numbers.
#7215
Faded to white anti-glare nose patch
Leslie 3-chime horn
White patch with black numbers.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
CV chart included in the box
Delaware & Hudson #9063 (black, yellow, Spelled-Out Road name)
Ready to Run
Crisp details and sharp painting and printing
Metal wheels
Knuckle couplers
HO Gunderson Multi-Max Auto Rack - Canadian Pacific (Beaver) #697886
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
0.025 inch Thick Brass Flat Sheet - 6x12inch
Brass Flat Sheet 6inch Wide x 12inch Long (1 pc)
15 x 30cm
Canadian National Power In Color Volume 4: Switchers - Stephen M. Timko
RELEASED: February 1, 2022
128 Pages, All Color
Continued coverage of Canadian Nationals motive power fleet with a focus on switchers! General Electric industrial-size units are featured along with the standard fare of Alco/MLW, EMD/GMD, and CLC end-cab units. A handful of Whitcombs are included, as are the GMD/CN-built Sweeps.
HO 40Ft Fruehauf Fluted Side Volume Van - Southern Pacific #A-5647-RT
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
HO Thrall 5-Unit Rebuilt 40ft Well Car - BNSF #238212 (A-E)
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40ft Well Cars! As the 53ft container quickly became the standard for domestic shipping, older well cars built to carry 48ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40ft on both single and five-unit cars. Today they can be seen carrying 20ft and 40ft containers in the well, with 40ft and 53ft units on top. Fully assembled and ready for service, the models feature:
- One time run of these roadnumbers - limited quantity, order now!
- 100- and 70-ton roller bearing trucks
- Correct 36 inch and 33 inch RP-25 turned metal wheelsets
- Heavy die-cast metal frame for superb performance empty or loaded
- Finely molded 3-D brake rods with chains, brake piping and weld lines on body
- Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
- Proto MAX(TM) metal knuckle couplers
HO Scale H1a Hudson Steam - DC/DCC Ready - Canadian Pacific (Beaver Shield) #2809
-Late walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
Gone Bust Block - Kit
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
HO 45ft CIMC Container - Wan Hai
(red, blue, white)
FEATURES:
- Based on common size & style used worldwide
- Fully-assembled & ready to use
- Colorful paint & lettering schemes
- Separate door latch details
- Realistic loads for WalthersMainline(R) & WalthersProto(R) well cars, sold separately
- Great detail for terminals, highways & industrial scenes
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OAKX #14
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO SD70ACe - DCC & Sound - Tacoma Rail #7001
Detailed Information
TMBL NOTES:
Tacoma Rail 7001 and 7002 are former EMD Demonstrator units. The road acquired the units in 2014 and painted them into this attractive red & white scheme. The pair are the most powerful units on the current TMBL roster and are often found running together or mixed with other members of TMBLs eclectic motive power stable.
SD70ACE SERIES LOCOMOTIVE FEATURES:
Full cab interior
Coupler cut levers
Flexible rubber trainline hose
Etched see-through steps
Lift rings
Wire grab irons
See-through cab windows
Flexible rubber MU hoses
Walkway tread
Sander lines
Windshield wipers
Accurately-painted and –printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch — Recommended radius: 22inch
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights on front trucks
Illuminated marker lights (where applicable)
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Western Cullen-Beacon Set (6)
Norfolk Southern NS 169791 - Protect II
Built: RBLT 7-99
The Evans 100 Ton Coil Car carries coiled steel. This car is brown with brown hoods. The BNSF lettering is white on the car and white on the hoods. The model is equipped with metal wheelsets and Kadee® couplers.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Lackawanna (DL&W Phoebe Show) #51028
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
N Scale Straight Track - 2-7/16in (62mm)(4/pkg)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
PSC Transfer Van - Canadian National #76553
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
N Scale AutoFlood III RD Coal Hopper - UP/CMO #504341
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO Code 100 Custom-Line(R) Crossing - 12-1/2 Degree
HO Code 100 with black ties and nickel silver rail. Precisely engineered angles of intersection to solve most crossing requirements. The 12 1/2 degree crossings are especially suited for junctions between double-track mainlines. A wide variety of single and double-track wyes and many other arrangements appear in Atlas layout instruction books.
HO GMD-1 - DC/Silent - Canadian National (1900s Noodle w/ Black Cab) #1900
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
Late Fall Colors -60 sq. in
Excellent for indicating trees, vines, weeds, bushes or any low growth. Create desired density by simply stretching foliage material
Athearn Roundhouse HO 50ft Plug Door Smooth Side Box, MILW 2650
MODEL FEATURES:
Fully-assembled and ready to run out of the box
Cars feature standard or cushioned underframe per prototype.
Highly-detailed, injection-molded body
Separately applied roof walk and brake wheel
Positionable sliding doors
Painted and printed for realistic decoration
Weighted for trouble free operation
33in machined metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
Pullman Standard introduced the all steel PS-1 box car in several diffent sizes including 40, 50 and 60 footlengths. Multiple door configurations and styles made these box cars very flexible. Pullman Standard had their own signature details, such as rolled non-terminating ends, and bow-tie stamped metal roofs. These were signature elements that identified the PS-1 among the other freight car builders of the time.
SPSF RAIL-O-GRAM FEATURES:
This unique car was painted by the Santa Fe, and was subsequently signed by many people in support of the SPSF merger proposal. Despite this, the merger was subsequently denied by the ICC.
N Scale Through Plate-Girder Bridge - Kit
3-5/8 x 3-1/8 x 5/8 inches
(9.2 x 7.9 x 1.5 cm)
The Cornerstone Through Plate-Girder Bridge kit is based on one of the most common North American railroad designs, typically used to cross short distances, and as approach spans for longer obstacles. In service for for decades, they are constructed of steel sections riveted together to form girders, and are known as through types as the track passes between, rather than on top of the spans.
Features include:
-One of the most common American railroad bridge designs
-Used where extra clearance is needed above highways, waterways & other railroads
-Fits steam-, diesel- & modern-eras
-Includes Risers to model as an approach span for the Single-Track Arched Pratt Truss Bridge (933-3870, sold separately)
-Build as single- or double-track with parts included
-Easily added to new or existing scenery
-Authentic rivets and other details
-Use with Cornerstone Double-Track Truss Bridge (933-3242), Bridge Pier 2-Pack (933-3880) and Bridge Abutment 2-Pack (933-3881) each sold separately - adaptable to most N Scale bridges
-Molded in dark gray plastic
HO RTR SD40-2 - DCC & T2 Sound - EMD Lease (EMDX) #6313
EMD FEATURES:
- Ex MILW
- Short fuel tank
- Leslie 3-chime horn
- Early radiator grilles
- 2 different plows (in poly bag)
- Fire cracker antenna
- Bell mounted behind the cab on the conductors side
Not only was EMD known for building locomotives, they also had a lease fleet of used ones. Power-short railroads could lease power on a short-term or long-term basis. Since the contracts would leave EMD to take care of maintenance, railroads could focus on other things. These brightly painted locos could be found on just about any railroad.
SD40-2 LOCOMOTIVE FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Coupler cut levers
- Flexible rubber MU hoses for durability
- Flexible rubber trainline hose
- See-through cab windows
- Fine-scale Celcon handrails for scale appearance
- Photo-etch stainless steel windshield wipers
- Wire grab irons
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Separately applied air tanks
- DCC-ready Non-sound version features 21-pin NEM DCC plug
- See-through dynamic brake and radiator fans
- Exhaust stack
- Frame mounted bell (unless noted)
- Detailed 4000 gallon fuel tank (unless different capacity is noted)
- McHenry scale knuckle couplers - Kadee compatible
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- Bi-directional LED lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
- Warranty service available
- Minimum radius: 18 inches
- Recommended radius: 22 inches
SOUND-EQUIPPED MODELS ALSO FEATURE
- Dual cube speakers
- Onboard DCC/Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
HO RTR 52Ft Mill Gondola - Washington Central #30021
Detailed Information
MODEL FEATURES:
Body-mounted McHenry operating scale knuckle couplers
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Razor sharp painting and printing
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
N Scale ACF 39Ft 2-Bay CF Covered Hopper - Round Hatches - CSX NYC (Tan) #875045
Product Information
This ready-to-run N Scale ACF 39Ft 2-Bay Center-Flow Covered Hopper with Round Hatches from Micro-Trains(R) is based on cars built beginning in the 1960s, making it ideal for your diesel-era freight into the 2020s and beyond. Covered hoppers such as this are used for hauling grain, fertilizer, frac sand and other bulk, granulated materials. This covered hopper features free-rolling Delrin(R) trucks with contoured axles, truck-mounted Magne-Matic(R) couplers and interior weights. Cars also include thin-profile foot stirrups, brake wheels and fine decoration. This ACF 2-Bay Center Flow Covered Hopper is one of many Micro-Trains N Scale freight cars.
HO Scale G2 AC4400CW - DCC & Sound - Kansas City Southern #4587
Detailed Information
KCS FEATURES:
Nathan K5LAR24 horn
Late body features
PTC antennas and GPS domes
Late, notched fuel tank
Central air intake moved rearward
Fuel tank welded to frame
Evenly spaced rear grab iron
High number boards
Extended Range Dynamic Brakes
Electric air dryer
GE steerable trucks
Front and Rear ditch lights
Two handrails above inverter cabinet
A 50-unit order was delivered before the turn of the century in the KCS gray paint scheme. Beginning in 2007, these units were renumbered and repainted into the attractive -Southern Belle- paint scheme that they wear today. With the recent merger of KCS and CP, these locomotives are expected to be seen across the entire Continent.
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
SF Shelf Whisker Metal Couplers - Medium Centerset
#118 SF Shelf Whisker Metal Couplers - Medium 9/32in Centerset Shank with #242 draft Gearboxes 2pr - Kit.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - New Haven (Script) #30172
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO NSC 60ft Ingot Flat Car - HPJX National Steel Car
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
HO NSC 64 Ft 6000 Cubic Gondola HS - IMRX #2298
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO H-6-G - DCC & Sound - Canadian National Railway (Straight Wafer) #1389
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
Plastruct 90044 ABS Channel 3/16 (5pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/16
HEIGHT IN MM
4.8mm
WIDTH IN INCHES
1/16
WIDTH IN MM
1.6mm
THICKNESS IN INCHES
.040
THICKNESSS IN MM
1.0mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
TRADITIONAL ABS CHANNELS Use for bracing or lightweight vertical support members in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor
Liquid Plastic Cement - Extra Thin - 1.4oz 40mL Quick Setting
For styrene, thin formula allows for precise application, with applicator brush.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AABX #206023
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO 200-Ton Crane w/Tender - Conrail/Small Logo #45218
MODEL FEATURES:
Rotating boom
Boom raises and lowers
Blocks raise and lower
Flat car with boom support arms
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Weighted for trouble free operation
Trucks with machined metal wheels and RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
The first railroad cranes relied on locomotives for positioning around the work site. Some big cranes required water tenders to power their steam boilers to operate and rotate the boom. Many of these cranes lasted into the late 1970s and 1980s before being converted to diesel. Some cranes were constructed as diesel towards the end of the steam era. Standard pulling operations for a 200 ton crane required at least 5 idler cars between the locomotive and the crane when in transit from one location to another. The reason was for more braking power as these cranes were often just as heavy, or perhaps heavier, than a single locomotive of the time.
HO EMD SD7 - DC/Silent - Southern Pacific (Orange Lettering/ Black Widow) #5318
Southern Pacific
- Steam generator equipment details on short hood
- Correct Mars style -ash can- light on both ends of the locomotive
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20210
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO ALCo RS-3 - DCC/Sound - Interstate #32
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO GMD SD40-2 - DCC Ready - CP Rail: As Delivered #5779
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO RTR PS-2 2600 Covered Hopper - Norfolk & Western (NW) #170732
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
HO Greenville 86ft Double Plug Door Box Car - CB&Q #15041
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Release Date: August 2021
Chicago, Burlington, and Quincy (CB&Q) -Original 1-1969- is our first Greenville 86ft auto parts offering for any of the -Hill Lines.- CB&Q was the only Hill Line railroad to take delivery of auto parts cars, and this release represents the first of CB&Qs two orders of Greenville prototypes. Delivered in 1969 when the BN merger plan called for green car deliveries, these cars had their pre-merger paint scheme, complete with large -Burlington- lettering. For return route stenciling, these cars state -When Empty Return To GTW RR Pontiac MICH- on the side. For additional context for how far and wide these cars traveled, these cars served into Canada. The car side has one and a half inch stenciling stating -This Car Too High To Clear St. Clair Tunnel Port Huron Michigan.- This warning lettering varied from car to car, and we have duplicated this with car-number specific and car-side specific placement of St. Clair tunnel stenciling! The CB&Q cars feature 100-Ton -Low Profile- Barber S-2-C Roller Bearing Trucks, with 36inch wheels, complete with accurate Hyatt rotating caps. These models are ready to operate with four different road numbers!
Kalmbach Publishing Book -Model Railroaders Guide to Bridgers and Trestles
The Model Railroaders Guide to Bridges & Trestles from Kalmbach is your one-stop source for information on prototype bridges. This book will guide you through the history of the various bridge types from the first days of railroading through today, showing older bridge types still in use, older bridge types that are now obsolete, and new concrete and steel designs. This also book includes the history of various types of bridges, tells about how bridges have evolved in design and size and how bridges fit in with other related scenic elements. It also discusses many bridge types including wood trestles, stone and concrete arches, culverts, wood and steel truss bridges, steel plate-girder bridges and cantilevers. Its loaded with information to help model railroaders choose appropriate bridges for the region, era, and type of railroad they model. Model Railroaders Guide to Bridges & Trestles is one of many Kalmbach model railroading how-to books.
Detailed Information 3 Pack of 3 different road numbers
MODEL FEATURES:
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
McHenry scale knuckle spring couplers installed
Painted and printed for realistic decoration
Weighted for trouble free operation
33in machined metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
The use of ice to refrigerate and preserve food dates back to prehistoric times. Through the ages, the seasonal harvesting of snow and ice was a regular practice of many cultures. By the turn of the 20th century, manufactured ice became more common. The Pacific Fruit Express (PFE), for example, maintained seven natural harvesting facilities, and operated 18 artificial ice plants. Their largest plant (located in Roseville, California) produced 1,100 tons of ice daily, and Rosevilles docks could accommodate up to 254 cars. At the industry’s peak, 1,200,000 tons of ice was produced for refrigerator car use annually.
A late-19th century wood-bodied reefer required re-icing every 250 miles (400 km) to 400 miles (640 km). The typical ice-bunker reefer from the 1920s were originally constructed with wood sheathing. Later, these early wood constructed cars would be replaced with steel constructed cars with plywood interiors by the 1940s. Vents in the bunker at the end of the car, along with slots in the wood floor racks, allowed cool air to circulate around the contents.
Specifications
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1940 - 1960
Minimum Age Recommendation: 14 years
Is Assembly Required: No