SoundBytes Transformer Hum

The SoundBytes Transformer Hum is a simple, fully self-contained sound module that plays a background hum reminiscent of an electrical transformer or substation. Add some ambiance to your layouts electrical infrastructure!

Best played at a low, understated volume.

FEATURES:
- Integrated speaker & volume control
- Easy to install and use
- Powered from 5V to 24V

Electrical Connections:
The SoundBytes module needs 5-24 volts of clean direct current (DC) power to operate. Connect the white wire to GND to activate the sound. Leave the white wire disconnected when not in use.

Red Wire = 5V to 24V
Black Wire = GND
White Wire = GND to activate

Note: Please do not use old model railroad power packs as a DC supply. These often produce large output spikes far in excess of their nameplate voltage ratings, are not suitable for powering modern electronics, and will damage SoundBytes modules.

The volume can be adjusted by using a small screwdriver to turn the white, square potentiometer on the PCB.

Specifications
1.25(L) x 1.25(W) x 1.25(H) inches