Digitrax BXP88 - LocoNet Occupancy Detector

LocoNet Occupancy Detector - 8 Detection Sections with Transponding and Power Management BXP88 makes adding detection and transponding to your layout easier than ever. No more complicated wiring! - DCC Occupancy Detection supports up to 8 Detection Sections letting you know when equipped rolling stock is in a detection section on your layout. - One Transponding Zone per Detection Section lets you know the location of transponder-equipped locos or rolling stock. - Intelligent Automatic short-circuit and over-current power management for each Detection Section, improves reliability by avoiding most booster fault shutdowns. - Connects to LocoNet to transmit Detection Section occupancy, Transponding and track power information. - Detects any powered locomotives in a Detection Section. - Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock. - Detects rolling stock equipped with resistor wheel sets. - Plug and Play with Digitrax DCC systems with automatic Railsync polarity detection. - LED output headers for front panel indication of Detection Section occupancy, Transponding, and power status. - Easy-connect pluggable track wire terminal blocks can plug-in straight or at right angles. - 3 Amp capacity per Detection Section, 8 Amp total unit capacity. - Automatically updates status at track power on. - Operations Mode Read Back allows you to read CV values of decoders equipped with transponders when on track. - Firmware update capability via IPL over LocoNet.