10Ft 6In Modified 1937 AAR Boxcar - Southern Billboard #20440
Intermountain HO - Trailer Train HTTX
60 ft Wood Deck Flat Car
Features sharp paint and lettering, wire details, laser-cut wood decks, metal wheelsets and Kadee(R) couplers.
HO FM H16-44, With Sound & DCC, Canadian National: Wet Noodle Scheme No.2202
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Spray Can - Dark Mica Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Code 83/100 Track Fastening Pins (400/pkg)
Make your next WalthersTrack project easier with these Track Pins! Designed to fit the spike holes molded on each tie, use them to temporarily hold and align Code 83 or Code 100 track products during construction. Easy to handle and use, each measures about 1-3/4in long (44mm), and the pack includes about 400 pins, perfect for big projects!
HO 4-8-4 Class FEF-3 - Sound/DC/DCC with Smoke - Union Pacific (1989 - 2013 Excursion w/ Mars Light) #844
The Northern type locomotives on the Union Pacific were built by Alco Schenectady Works in 3 classes between August 1937 and December 1944. The first class, designated FEF-1, for Four Eight Four, comprised numbers 800-819. Fitted with 77-inch drivers and a 300-pound boiler pressure, UP was impressed by their performance and took delivery of 15 additional 4-8-4 locomotives in Aug-Oct 1939, numbers 820-834. These locomotives were equipped with 80-inch drivers and larger 14-wheel centipede style tenders with a 23,500 gallon capacity and were class FEF-2. In Dec 1944, 10 additional 4-8-4 locomotives were delivered, these equipped with low-backpressure double stacks, numbered 835-844, and designated FEF-3. All three classes developed 63,800 lbs of tractive effort.
Throughout their service careers multiple modifications were made, including conversion to oil, feedwater heater systems, addition of smoke lifters (designated Wind Wings on UP drawings) and a Mars light, and replacement of stacks from singles to doubles and even triple stacks. UP 844, the final steam locomotive delivered to UP, has been in continuous service on Union Pacific since it was built in 1944; renumbered from UP 844 to UP 8444 between June 1962 and June 1989.
In this production, BLI is modeling the FEF-2 Class and also the #844 with its Mars Light. Notable features are listed below:
Accurately modeled FEF-2 double stack and triple stack - prototypically accurate for each road number
Accurately modeled turret casing
Individual side rods
Centipede-style oil tenders with finely detailed oil inserts. #844 has the Heritage Fleet containment dam, other road numbers do not.
Options for Worthington and Sellers FWH
Wind Wings on models where prototypically accurate
Prototypically accurate FEF-2 front end and pilot (except #844)
Walschaerts Valve Gear
#844 as it ran from 1989-2013, with Mars Light
N Scale Flexi Flo Hopper (Early) - FMC Chemicals SHPX #76004
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
B&O/ Chessie #C-3984
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
Better than brass detail
Brand new tooling with many roads first time offered in plastic
DCC LED lighting with the option of Sound by Soundtraxx
Railroad specific detail and road number specific detail
B&O CHESSIE FEATURES:
Brand NEW ICC B&O Style body
Caboose trucks with roller bearing caps
Illuminated marker lights, where appropriate
Overhanging, diagonal-panel roof with or without blank panel at smoke jack per prototype
Overhanging, x-panel roof for the B&O Chessie caboose
Angled window screens
Toilet Drain
Reflectors on end cages
Ash pans
Early style axle-driven generator
ICC CABOOSE FEATURES:
Better than brass detail including roadname and road number specific detail Laser-Sharp Painting and Printing
Interior seating for the addition of crew figures.
See-through End Platforms and Steps
Flush Window Glazing
Wire-form Grab Irons
Caboose trucks with animated rotating bearing or static friction bearing caps
Axle Generator Details
Body-Mounted McHenry scale knuckle-spring Couplers
Machined Metal RP25 Profile Wheel Sets
Fully-assembled and ready-to-run out of the box
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Separate wireform grab irons, etched metal coupler platforms
Coupler lift bars, trainline hoses, brake hoses, and hardware
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Weighted for trouble-free operation
Window packaging for easy viewing, plus interior plastic blister safely holds the model for convenient storage
Multiple road numbers
Minimum radius: 18In
LED LIGHT EQUIPPED FEATURES:
LED lighting for long life and reliable operation
On-board DCC Decoder by NCE
Operates in DCC and Analog (DC) with lighting Functions Controllable in DCC
Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
LED Interior Lights
All functions NMRA compatible in DCC mode
SOUND EQUIPPED MODELS ALSO FEATURE:
Soundtraxx Tsunami SoundCar decoder w/ included sounds:
Air horn or conductors whistle as appropriate
Clickety-clack with optional wheel flat spot sounds
Brake set/release sounds including retainers and brake squeal
-Big Hole- emergency brake application sound
Handbrake tie-down/release
Adjustable flange squeal
Air, horn, and bell sounds work seamlessly with Soundtraxx locomotive sound decoders
Supports Advanced Consisting in DCC
Full DCC functions available when operated in DCC mode
All functions NMRA compatible in DCC mode
HO 85ft General American G85 Flatcar - GTTX (Brown) #300316
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
Juneco Scale Models Canadian National GP Sunshades (4/pkg)
Spark Arrestors - Non-lifting Type (2/pkg)
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
HO EMD FT A+B Set - DC/DCC/Sound - Great Northern (GN As Delivered) #408-C + 408-D
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
P514 5-Amp Power Supply
5 amp DC power supply for PB5, DB5, SB5, PH5 (not for PB105). Can also be used for accessories and lights.
HO EMD GP40 - DCC Ready - RF&P (Blue and Grey) #122
1982+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
N Scale Flexi Flo Hopper (Early) - Penn Central (Ex NYC Patchout) - 6-pack
Road Numbers Include:
#897802
#897808
#897812
#897813
#897815
#897823
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO GMD-1 - DCC & Sound - Canadian National (1900s Noodle w/ Red Cab) #1907
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
HO RTR ACF 4650 3-Bay Hopper - SOO Line #74213
Date: BLT 11-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO 36ft Old Time Stock Car - CCCC #2448
MODEL FEATURES:
- Era: 1890s-1910s+
- Separately applied roof walk
- Wire truss rods
- Molded plastic underframe with separately applied brake cylinder
- Painted and printed for realistic decoration
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Fully assembled and ready-to-run
- Minimum radius: 15 inches
HO Stirrup Steps (Style B) - 25pcs
Repair or update your entire freight car fleet quickly and easily with formed brass HO Scale A-Line Stirrup Steps. Available in three styles, they offer the perfect balance between prototypical appearance and durability on virtually any freight car.
PSC Transfer Van - Canadian National #76555
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
HO Ready-Made Trees - Sun-Kissed (3/pk)
4-5 inches (10.1 cm-12.7 cm)
Finely detailed, painted, flexible trunks and foliage in a variety of natural contrasts and highlights. Use combinations of types and sizes throughout your layout for superior realism. Trees have planting pin and optional detachable base for temporary placement.
HO Switch Stand w/Interlock Set (1)
HO PS-2-4427 High Side Covered Hopper - Milwaukee Delivery 3-1967 #97894
Product: Pullman-Standard PS-2CD 4427 ?High Side? Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36″ Wheels
? Milwaukee Road MILW ?Delivery 3-1967? wears the classic yellow and black graphics as applied to this 300-car order from Pullman-Standard in 1967. Tangent?s previous run from 2018 featured Milwaukee?s 1968 order of cars with gravity-pneumatic outlet gates. We have carefully replicated the lettering on every panel, bay and center sill from bold MILWAUKEE ROAD to the tiniest PS lot 9174 stencil number. All of the lettering is present and accurate. These cars feature Miner gravity gates and a PS ribbed-style roof hatch. The model also features 100-ton Barber S-2 trucks with rotating Timken caps. Each SKU number varies with CAPY, liner stencil and related Pullan date information. We hear you Milwaukee Road modelers, and your continued requests for more MILW Tangent covered hoppers in our correct shade of Federal Yellow!
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Trailer Train #91976
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Graffiti Decal Set - Contemporary Graffiti #3 - Waterslide Decals
HO 20ft Corrugated Container - CGM/CGTU #1 (3pk)
MODEL FEATURES:
- Fully-assembled
- Easily stackable
- Each container is individually numbered
PROTOTYPE AND BACKGROUND INFO:
An intermodal container is a large, standardized shipping container, designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport ? from ship to rail to truck ? without unloading and reloading their cargo. Corrugating the sheet metal used for the sides and roof contributes significantly to the containers rigidity and stacking strength, just like in corrugated iron or in cardboard boxes. International containers have castings with openings for twistlock fasteners 20 feet apart on the eight corners, to allow gripping the box from above, below, or the side, and they can be stacked up to five units high for storage.
HO - Nathan K5LA 5-Chime Air Horn w/Shields - Lost Wax Brass Casting
Replacement Geared Driver Assembly for Diesels (3 pack)
This WalthersProto Replacement Geared Driver Assembly is a replacement for original Life-Like Trains early PROTO 2000(R) E6, E7, E8 and E9 diesels produced before 2005. This package includes three replacement axles with gear and bearing block.
HO 53ft Railgon Gondola - Delaware & Hudson #15070
(black, white, large name)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
N Scale George Roberts Printing Inc. - Kit
Product Information
The Walthers Cornerstone George Roberts Printing Company kit is typical of concrete curtain-wall industrial buildings found in commercial and manufacturing districts in cities across the continent. Geo. Roberts Printing fits on any layout from the 1920s to the present. Large windows, a hallmark of this architectural style, provide plenty of natural illumination and made this type of building a popular choice for all types of industries. To save space in the cramped industrial district, a covered loading dock is built into the rear of the building and will add plenty of operation to your railroading. For the finishing touch, authentic -extras- like the rooftop water tank, three-story fire escape and colorful decal signs are included. As shown, the George Roberts Printing Company measures: 4-1/2 x 7-3/4 x 7-1/4inch (11.2 x 19.3 x 18.1cm)
Easy-to-build plastic kit
Fits 1920s to present layouts
Covered railcar loading dock
Colorful decal signs for several businesses
Molded in appropriate base colors
HO 60ft Hi-Cube Plate F Boxcar - Trailer Train TTX #662266
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO 24-Seven Quick Mart - Kit
Product Information
The Walthers Cornerstone 24-Seven Quick Mart is based on typical small, single-story businesses that were constructed in rapidly developing suburban neighborhoods in the postwar era. Featuring a brick structure with large display windows, this kit is typical of mini marts still used on Main Street or in suburban business districts. This easy-to-build plastic kit comes molded in appropriate base colors plus clear window glazing and includes a printed interior and printed signs. 24-Seven Quick Mart will be a welcome addition to any diesel- era layout.
Perfect for your layouts 1950s and later scenes
Common storefront used from coast to coast
Typical convenience store design
Includes printed interior
Realistic printed signs
Fits diesel era city and small town scenes
Easy-to-build plastic kit
Molded in appropriate base colors plus clear glazing
The finished structure measures: 7-1/8 x 5-3/8 x 2-5/8inch (18 x 13.6 x 6.6cm)
HO 68Ft Railgon Gondola - CSX Transportation #491430
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
G (1:24) Custom Right Turn Staircase (1pc)
Use in interior applications where a closed casing or spiral staircase is desired. Combine with other staircases to achieve any configuration. Precision Injection Molded in Styrene Plastic.
SCALE
G
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
19/64In
HEIGHT IN MM
7.5mm
WIDTH IN INCHES
1-9/16In
WIDTH IN MM
39.7mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
2-3/8In
LENGTH IN MM
60mm
HO Scale NSC 73Ft Centerbeam Flatcar - CP Rail #318086
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
HO Magor 54ft Flat Car - DODX - Navy Scheme (Era: 1975+) #38470
The Rapido Trains HO scale DODX Magor Flatcar features:
FIRST TIME IN PLASTIC!
Drawn from original blueprints, measurements and 3D scans
Fully-detailed underframe including piping and equipment
Correct Buckeye 3-axle trucks with incredible detail
Trucks have friction bearings or retrofitted roller bearings as appropriate
Metal knuckle couplers
Simulated wood deck design
Loads coming soon
#256 Nylon Insulating Screws 2-56 x 1/2inch- 12pcs
Used for installing decoder board in locomotives
HO Bi-Level Auto Rack - Transportación Ferroviaria Mexicana (TFM)/TTGX Flat Car #987753
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- IHB Indiana Harbor Belt #819008
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) #653247
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO GMD SD40-2f - DCC Ready - CP Rail #9006
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
D.A.K. wash for Africa Corps vehicles, also other light colored desert vehicles. Apply on details and remove excess with a clean brush moist with Enamel Thinner. A very appropriate color for desert vehicles painted with a light sand color, especially German tanks from DAK. The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows.
The excess of the wash can be easily removed with a clean brush and White Spirit.
HO Dash 8-40CM - DCC Ready - BC Rail: R/W/B w/ Frame Stripe #4609
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
HO RTR Thrall 5-Unit Rebuilt 40Ft Well Car - BNSF Railway #238137 A-E
(Boxcar Red, white; Wedge Logo, Yellow Markings)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft on both single and five-unit cars. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers - limited quantiuty, order now!
100- and 70-ton roller bearing trucks
Correct 36inch and 33inch RP-25 turned metal wheelsets
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
Proto MAX(TM) metal knuckle couplers
HO GE ES44DC - DCC & Sound - CSX/YN3 #5226
ETA: June 2023
Detailed Information
CSX FEATURES:
K5HL horn
Regular bell
Low cab headlight
High mounted rear headlight
Large plow
Rear drop step
Alternating front ditch lights (Function in DCC mode)
Accurate colors and artwork
ROAD NUMBER SPECIFIC FEATURES:
#5226
As-Delivered YN3 paint scheme
#5228
Unique primer painted version with CSX logo on the nose#5245
#5245
As-Delivered YN3 paint scheme#5250
#5250
Later CSX -Boxcar- logo repaint
ES44 SERIES LOCOMOTIVE FEATURES:
Illuminated ditch lights
Tinted cab windows
Large antenna dome
GPS dome
Hand brake panel grille
Nathan K5HL horn
5000-gallon fuel tank
Low or high front headlight per prototype
See through dynamic brake intakes
Low or high front headlight per prototype
See through dynamic brake intakes
Short auxiliary cab rear left-side doors
Right side forward electrical cabinet with X-Panel
Engine compartment side grab irons (Non-CP Units only)
No engine compartment side grab irons (CP Units only)
Flush radiator compartment doors
Flush heat exchanger housing and top radiator grilles (Non-CP Units only)
Raised heat exchanger housing and top radiator grilles (CP Units only)
Dynamic brake exhaust vents spaced per prototype
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 73Ft Center Partition Car - First Union Rail #735931
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
ReadyGrass Mat Roll - 25 x 33inch - Green Grass
25 x 33inch (63.5 x 83.8cm)
Product Information
Quick Ground Cover for Grassy Scenes
Ideal for any scene where you want realistic grass, this non-shedding, vinyl-backed grass mat is easily cut to fit any scene. Attach to your layout base with adhesive (sold separately) or leave it loose so your can roll it up and use it for future projects.
HO TTC G-Class Subway - DC/DCC/Sound - A-B Train #2 #5098+5099 (1 Married Pair)
Available as:
Gorgeous display model of a two-car train in St. Clair Station, OR
Four-car, operating model (silent or equipped with SOUND), OR
Two-car, operating add-on model (silent or equipped with SOUND)
Each Rapido Toronto Subway Car features:
Design created from original factory drawings and field measurements
Fully detailed interiors including seats, hand holds and lighting
Working lights: headlights, rear marker lights, destination sign
Fully detailed underbodies
Wire grab irons
DC/DCC ready or DCC/Sound (Display models are unpowered)
Display models include lighting powered by an included 12V DC power supply
Ages 14 and up. This is not a toy.
Trinity 3230 Covered Hopper - Chicago Freight Car #3108
FEATURES:
All new tooling
Ready to run
Injection molded plastic
Fine scale detail
Separately applied wire grab irons
Separately applied wire cut levers
Etched metal roofwalks
Crisp painting and printing
HO 1950 Kenworth T 600 - Yellow/White
HO Uncoupler Gluing Jig - For installing #312, #321, and #322 Uncouplers
Uncoupler gluing jig is designed to aid in the precision installation of uncouplers in track.
HO Barber S-1 Freight Trucks w/Wheelsets (1 pair)
HO AutoFlood III RD Coal Hopper - UP/CMO #504288
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO EMD GP40R - DCC & Sound - Illinois Central #3137
Mid 90s
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
N Scale Co-Operative Storage Shed on Pilings - Kit
FEATURES:
- Realistic wood-textured walls
- Fits steam and diesel-era layouts
- Decal signs
- Easy-to-build plastic kit
- Molded in appropriate colors
MEASUREMENTS:
4-1/4 x 2-3/4 x 2-1/4 inches
N Scale EMD SD70ACe - Paragon4 Sound/DC/DCC - UP (Chicago & North Western Heritage Livery) #1995
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up (except for rubber traction tire)
- ABS Plastic Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, and Cut Levers
- Prototypical Light Operation with Separately Controllable Headlight, Rear Light, Cab Light, and Front Ditch Lights
- Prototypically Accurate Sounds for an EMD SD70ACe Locomotive
- Microtrains-compatible Couplers (2)
- Will Operate on Code 55, Code 70, and Code 80 Rail
- Minimum Operating Radius: 9.75 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
HO NSC 64 Ft 6000 Cubic Gondola HS - NMPX/ Niagara Metals (6 pkg) #1
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Includes Road Numbers:
2352
2361
2363
2365
2366
2368
Road Numbers #2369 and #2370 are sold separately.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO FM H16-44, With Sound & DCC, Canadian Pacific: Action Red Scheme No.8715
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO RTR PS 4740 Covered Hopper - Illinois Central (3pkg)
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Body-mounted McHenry operating scale knuckle couplers
36inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Multi-packs feature unique road numbers
Weighted for optimum performance
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX #16236
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO 50Ft PS 5277 Box - Detroit & Mackinac D&M #2223
MODEL FEATURES:
Single 10Ft Pullman Standard door
Separately applied grab irons, end ladders, and brake wheel
Photo-etch coupler cross-over platform
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
B-14 - HO 4 1/2in Amber Jewels (12/pkg)
HO SCALE - BUT CAN BE USED IN OTHER SCALES - MEASURES 0.055 inches
Digitrax DN123M2 N Scale Decoder
HO Scale Newspaper Stands - 5pkg
This is a package of 5 stands including graphics
HO Union X-3 Tankcar - Procor Limited #37777
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
PRR X31A Double-Door Boxcar: Circle Keystone - Automobile - Single Car #69005
Detail Variations:
Built 1934-35, as operated to approx. 1954.
6-pack includes the following numbers:
#69005
#69177
#69308
#69321
#69379
#69402
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
HO Just Plug Lighted Vehicle - Blue Coupe
Out for a drive? This well mannered coupe has a little bit of a wild side!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
HO 4650 Centerflow Hopper - Farmland (CO-OP) #3433
Features:
Etched metal roof walks
Detailed brake gear
Blackened metal wheels
Accurate painting and printing
100-ton roller-bearing trucks and body mounted AccuMate couplers with screw-attached coupler pockets.
AccuMate couplers are made under license from AccuRail, Inc.
Juneco Scale Models CN, CP & GTW S-2, S-3, S-4 Diesel Exhaust Stack
HO Railroad Roman - Letters & Numbers (White) 22inch-24inch - Waterslide Decals
Trainman N Scale 4750 Covered Hopper - Canadian national (IC) #769578
Features
- Weighted body
- Equipped with AccuMate Knuckle Couplers
- Accurate painting and lettering
HO Code 83 Nickel Silver DCC Friendly #6 Turnout - Left Hand
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 83 rail!
Combining great looks and great performance in a complete system, each item comes fully assembled and features:
-Thin profile ties in realistic dark brown with enhanced wood grain detail
-Fine profile molded spike and tie plate details on each tie
-Spike-mounting holes positioned next to the rail
-Molded starter points on underside of ties for fasteners
-Custom formulated nickel silver rail for outstanding electrical conductivity
In addition to these details, each DCC-friendly Code 83 Turnout features:
-Snap-action points
-Solid rail points for better conductivity
-Isolated frogs with built-in jumper for powering as desired
-Current jumpers entering and leaving the frogs
-Insulated tie bar
HO SP C-40-3 Steel Cupola Caboose - Texas and New Orleans (T&NO Delivery Scheme) #400
1940+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
Tree Armatures - Deciduous - 5-7 inches (12pk)
Bend and twist Tree Armature into a realistic shape. Apply Hob-e-Tac to the branches. Let dry clear and use a variety of the of the following foliage materials to make all types of trees for our layout: Underbrush, Bushes, Clump-Foliage, Foliage Clusters, Lichen, Foliage, Fine-Leaf Foliage, and Poly Fiber.
17,600 Gallon Tank Car - ADM (Molecule) #17592
Features:
Brake rigging molded separately
Scale handrails
Metal safety bars, tank fittings and safety placards
AccuMate couplers
Screw-attached 100-ton roller-bearing trucks for added reliability
Accurate painting and lettering
Brake wheel chain
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
OVR Exclusive - HO Bi-Level Auto Rack - Canadian National/TTGX #702259
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
Vallejo 73823 - Model Wash - Weathering FX - Slime Grime Light - 40mL Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Blue Grey is recommended for vehicles with a Panzer Grey base color, as well as all vehicles with a similar grey base.
HO - Air Horns (Unpainted Brass Casting) - Leslie S-5T; 5-Chime All Forward
HO RTR 85Ft Budd Big Dome Bar Lounge Dormitory - Santa Fe #60
Business Train (Real Metal Finish)
Non Lighted
Product Information
Modeling one of Santa Fes most unique cars is easy with the 85Ft Budd Big Dome Bar Lounge Dormitory! Tailor-made for enjoying trackside scenery, the glass-enclosed upper deck offered superb views for 57 passengers in coach seats, with 18 additional lounge seats. The lower level provided an additional small lounge area, along with dormitory space for 12 crewmen. Ready for operation or display, features of this WalthersProto replica include:
Real metal finish simulates stainless steel
Factory-installed grab irons
Prototypically accurate window tinting
Window gasket details as appropriate
Sprung operating diaphragms
Modeler-installed extended drawbars for 22Inch radius curves included
Turned metal RP-25 wheelsets and correct trucks with built-in electrical contacts
Proto MAX metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24Inch radius is recommended for operation.
HO GE Dash 9-40CW - DC/DCC Ready - Norfolk Southern NS #9754
NS FEATURES:
Front and rear ditch lights (Alternately flash in DCC mode)
High-mounted head light and number boards
K5 horn
Electronic brakes
Graham White Electronic bell
Delivered new in 2003 from GE, NS took delivery of class 9745-9811 Dash 9-40CW locomotives. Some unique features include: electronic bell, high mounted headlight, and electronic parking brake. We are offering both versions of the front cab schemes to choose from!
ROAD NUMBER SPECIFIC FEATURES:
#9754 -White face- scheme
#9773 -Unibrow- scheme
#9806 -Unibrow- scheme
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
Built-&-Ready Landmark Structures - Old Weathered Barn
Assembled - 7-13/16 x 5-11/16 inches (19.8 x 14.4cm)
Fully assembled and weathered traditional gambrel barn features a concrete silo, fieldstone foundation, shake shingled roof, hayloft door with pulley and rope plus a cupola with vintage weather vane. Siding, windows and barn doors are in various states of disrepair.
HO Ladder with Safety Cage (1pc)
Use on towers, tanks, buildings and other tall structures where a ladder is perpindicular (or 90¡) to the ground. Precision Injection Molded in Gray ABS. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
SCALE
HO
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
27/64
HEIGHT IN MM
10.7mm
LENGTH IN INCHES
4-7/8
LENGTH IN MM
125mm
HO Heavy-Duty Fire Engine - Assembled - Red
Product Information
This SceneMaster HO Scale Heavy-Duty Fire Truck fills a critical role in the modern Fire Department, carrying equipment and personnel ready to handle dangerous fires. This heavy-duty rig is perfect for assignment to a firehouse in the industrial district of any HO Scale city (similar vehicles are used for heavy and specialized rescue companies, as well as incident command and control units and mobile hospitals) and looks great parked with your collection too!
Each SceneMaster vehicle is a highly detailed replica, using die cast metal and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations. Use the Heavy-Duty Fire Truck alongside other SceneMaster HO Scale emergency vehicles.
Licensed replica of popular International truck
Must-have for modern HO model railroads
Perfect size for collectors
Fully assembled and painted
Realistic chrome parts as appropriate
Die cast metal and plastic parts
HO - Diesel Sun Shade, Etched Brass
Evergreen Scale Models 2050 .050in Opaque White Polystyrene V Groove Siding (1 Sheet)
.020in (.50mm)THICK X .050in ( 1.3mm) GROOVE SPACING X .012in (.30mm) GROOVE WIDTH. GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
6in X 12in
Z Scale 33inch Diameter Wheel Sets - 12 axles
DESCRIPTION
Z Scale 33inch diameter plastic wheel sets.
Autumn Harvest
Perfect for farm field scenes, kit includes injection-molded interlocking strips molded in an appropriate green or harvest brown color. Simply connect the strips, place on your layout and cover the strip bases with earth ground cover. Corn stalks represent typical spacing and height, and strips are easily cut to fit the field in odd spaces.
HO 85ft ACF Dome Diner Coach - Union Pacific (Colorado Eagle) #8004
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
Unique to the Union Pacific, the Dome Diner offered patrons fine dining and unequalled views of the beautiful scenery. This car was built by American Car & Foundry in 1955 and numbered 8004. Today it is named for the Missouri Pacific streamliner that was the first to feature dome coaches.
HO 89ft Thrall Enclosed Tri-Level Auto Carrier - BNSF #303084
Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these Walthers Proto models! Introduced in the mid-1970s especially to carry automobiles, the prototypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89ft flatcars with sidesill cut-outs and 28in wheels for added clearance. In service all across North America, the racks carry the owners logos, and most ride on flatcars leased from TTX with ETTX reporting marks.
A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
-Limited edition - one time run of these numbers!
-Prototypes in service from the 1970s to the present
-Factory-installed grab irons
-Separately molded and applied side ladders
-Ultra-smooth rolling metal axles with correct 28in wheels
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24in radius is recommended for operation.
HO USRA Single-Sheathed Boxcar: D&H
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Steam Encounters in Ontario Vol.2 by Ian Wilson
Third in a series of all-colour softcovers featuring Jim Guerin pictures in Ontario and Quebec. This volume showcases CNR and CPR steam and diesel in Ontario from 1956 to 1959.
Escape back to the 1950s railway scene in southwestern Ontario with our third all-colour title in the Encounters series. Sit back, relax, and turn the pages as we resume our adventures with photographer Jim Guerin.
We begin in the spring of 1956, and throughout the pages you will revisit favourite haunts?Bayview/Hamilton Junction, Dundas, Guelph, Kitchener, Galt, Stratford, London, Southampton and Lambton.
The photo reproduction is the same high quality you have come to expect with our Made in Canada product. Ian Wilsons narrative, combined with graphic artist Rebecas photo finishing, is served up to you on the finest glossy archival paper stock by our friends at Ampersand Printing.
As with all our Encounters volumes, you will savour a collection of photographic vignettes, fleeting glimpses. These cover the southwestern Ontario scene between 1956 and 1959. Pick up the 48-page softcover book and lose yourself in the spreads anytime!
HO GP38-2 - DCC Ready - Helm Leasing (HLCX) #3812
Detailed Information
HLCX FEATURES:
Ex Texas Mexican Railway
3800 gallon Fuel tank
Blomberg B trucks
Front ditch lights
Front small EMD plow
Firecracker antenna
Helm Leasing is a large locomotive leasing outfit known for providing reliable power to railroads for short term and long term contracts. Many were painted into this very attractive scheme and could be found in service on just about any railroad.
ROAD NUMBER SPECIFIC FEATURES:
#3812
Ex TM #863
Mid/Late phase body
All-weather window
Leslie 3-chime horn
#3814
Ex TM #867
Late phase body
Q-style radiator fans
Nathan P5 horn
Angled blower housing
All- weather window
GP38-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
Rock Molds Embankmemts
Highly detailed, flexible and durable rock molds can be used to cast small boulders, rock outcroppings, top rocks for fields and creeks, or make entire rock faces by combining castings produced with these molds.
HO PS-2-4427 High Side Covered Hopper - Milwaukee Delivery 3-1967 #97922
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36in #8243; Wheels
Milwaukee Road MILW Delivery 3-1967 wears the classic yellow and black graphics as applied to this 300-car order from Pullman-Standard in 1967. Tangents previous run from 2018 featured Milwaukees 1968 order of cars with gravity-pneumatic outlet gates. We have carefully replicated the lettering on every panel, bay and center sill from bold MILWAUKEE ROAD to the tiniest PS lot 9174 stencil number. All of the lettering is present and accurate. These cars feature Miner gravity gates and a PS ribbed-style roof hatch. The model also features 100-ton Barber S-2 trucks with rotating Timken caps. Each SKU number varies with CAPY, liner stencil and related Pullan date information. We hear you Milwaukee Road modelers, and your continued requests for more MILW Tangent covered hoppers in our correct shade of Federal Yellow!
HO PC&F 5241 CUFT - Boxcar - Berlin Mills - Single Car #291
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
N Scale Modified Pullman-Standard 40' Hy-Cube Boxcar Micro-Mouse St. Patrick's Day
Micro-Mouse St. Patricks Day 2024
Micro-Mouse is out and about exploring the fresh spring fields of clover. He found the rainbow and followed it to the end and was rewarded with a mill gondola full of his favorite cheeses. Happy St. Patrick?s Day!
HO 40Ft PS-1 Boxcar - Port Huron & Detroit #1016
Date: BK 7-62
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
HO GP9u - DC/DCC/Sound - CP - Multimark : #1544
- First ever accurate model in plastic - often imitated, never exact!
- Long service lives, 1980s+, all throughout Canada and the US
- Powered slug with traction motor sounds and flashing beacons
- Heavy diecast frame with super detailed piping and traction cables
- Detailed Blomberg trucks (Later series have rotating bearing caps)
- Traction motor details on gearbox
- Working track lights, class lights, control stand lights
- Metal side handrails
- Working ditch lights on prototypically appropriate road numbers
- Front and rear plows, plates or footboards on appropriate road numbers
Intermountain Railway HO Scale Evans 100 Ton Coil Car Chicago North Western #39620
HO GMD SD40-2 - DCC Ready - Algoma Central #186
Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound Select decoder. Analog (DC) version has 21 pin socket for DCC module.
Bowser does not recommend LOK sound locos for use on DC layouts.
Features LokSound Select decoder, GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, Flywheels, Can motor, RP25 flange, KD couplers
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
HO F30A 50Ft Flat Car MOW w/Deck Rails - Conrail (CR MOW) #58709
This car does NOT include sleeper or camp vans
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
Sparkling Silver Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO 1973 Kenworth K100 Aerodyne Sleeper Cab Tractor
HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - GTWI
#85663
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
Trainman HO Thrall 4750 Covered Hopper - Rail Logistics (EAFX) #16028
Features:
-Weighted body
-Equipped with AccuMate Knuckle Couplers
-Trucks equipped with free-rolling metal wheels
-Accurate painting and lettering
AccuMate couplers are made under license from AccuRail, Inc.
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.156 (8pcs pkg)
Pearl Blue Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
N Scale Flexi Flo Hopper (Late) - Penn Central (Billboard Repaint) #897854
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO ACF 4600 3-Bay Centerflow Hopper - DT&I/Brown #10333
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Kenworth Tractor & Trailer - Green
KENWORTH MODEL FEATURES:
- Molded cab interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
- Factory assembled with many detail parts applied
TRAILER MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- Red and white conspicuity stripes
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
HO Gunderson Multi-Max Auto Rack - Canadian Pacific (Beaver) #697974
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
HO GE C36-7 - DC/DCC/Sound - Ferrocarriles Nacionales de Mexico #432
The Rapido Trains HO Scale C36-7 is based on General Electric's higher-horsepower six-axle Dash-7 offering, with a 16-cylinder 3,600 horsepower or 3,750 hp rating (compared to the C30-7's 3,000 hp.) Built between July 1979 and February 1989, over 599 total units were produced. Of those, 129 were domestic orders for Conrail, Missouri Pacific, Norfolk & Western, and Norfolk Southern. Another 40 were made for Ferrocarril del Pacifico and National de Mexico. Lastly, 422 were made for China with many significant export differences, and the final units produced were 8 for Comilog in Gabon. Despite smaller production numbers, the C36-7 was ordered at key moments that resulted in it representing the evolution of GE s Dash-7 line more than the popular C30-7s. When GE launched "1977 Series Locomotives" (Dash-7s) in, they cataloged a C30-7, C33-7, and C36-7. Railroads immediately ordered C30-7's for booming coal service. The C33-7 was never ordered. The C36-7 was ignored until 1979, when National de Mexico and Ferrocarril del Pacifico placed orders. These export C36-7s for Mexico were essentially identical externally to C30-7s, which were being built by the hundreds at the time. Ferrocarril del Pacifico's units were repainted into striking two-tone blue FNM paint and worked both freight and passenger service. Of the 40 C36-7s built for Mexico, only one is still in service in 2024 - Ferromex 9336. Incredibly, despite being the last operating C36-7 (among few remaining operating C30-7's) 9336 was repainted in Ferromex's classy "Diet Coke" scheme in 2023. The Rapido model features railroad and era-specific details, etched-metal grilles and details, roadname-appropriate lighting packages and Rapido semi-scale knuckle couplers on both ends. The smooth-running drive features a five-pole motor with dual flywheels, backed up with the MoPower capacitor system for uninterrupted operation. This standard DC model is DCC ready with a 21-pin interface for easy conversion. The GE C36-7 is part of the line of Rapido Trains HO Scale locomotives.
The Rapido HO Scale C36-7 Locomotive features:
Headlights and rear lights
Class lights, marker lights, or ditch lights, where applicable
Step lights
Lit numberboards
Full traction motor casing details
Metal brake chain on engineers side
Detailed underbody piping and conduit
Separate grab irons
Rapidos innovative dead straight metal side handrails with plastic stanchions
Detailed cab interior
Lighted control stand
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Sound-equipped units feature ESU Loksound V5 decoders
Van Hool CX45 MotorCoach: New Facade - ABC Van Hool (Gray)
Diecast metal
Limited edition!
All-New bluetooth controlled Tsunami2 DCC Sound Decoder - EMD-2 Diesel Locomotives
Blunami will change the way you enjoy the model railroading hobby
The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.
Currently the app is only available for Apple iOS devices (versions 8 or newer). The app offers an easy graphic interface to adjust all Blunami settings and features with drop-downs and slider bars. All programming can be done through the app, as well as with your DCC system. You no longer need to understand CVs or own a command station to run your trains!
HO EMD GP7 - DC/DCC Ready - Undecorated Non-Dynamic - Phase II
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
UNDEC FEATURES:
Optional parts include...
Dual Leslie A-200s or single S3L horn
Winterization hatch
1200 and 1600 gallon fuel tanks
Speed recorder
Foot boards
Dual MU receptacles
-Nail-, -Firecracker-, and Sinclair -Ice Skate- antennas
In 1949 EMD unveiled the GP7, a general-purpose road-switcher that was suitable for a variety of tasks on the railroad. The GP7 went through several production variations, known as -phases- by railroad enthusiasts. -Phase II- units were typified by the addition of a box on the walkways on the firemans side, as well as the (optional) addition of dynamic brakes. This undecorated release is a good option for do-it-yourself modelers or freelancers, and comes with a selection of common, optional detail parts as well.
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Tsunami 2 TSU-1100 Digital Sound Decoder for Steam Models
Dimensions: 27 by 10.5 by 5mm Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output) Function Outputs: 6
Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V
HO Scale G2 SD90MAC Diesel - DCC Ready - Norfolk Southern #7287
Detailed Information
NS FEATURES:
Primed for Grime
Patches match prototype deletion of UP reporting marks
Different patch shapes, paint color, & slogans per road number
Former UP units; major spotting details remain the same
EOTD above left rear of fuel tank
This group consisted of 110 second-hand units in total, 100 coming from UP and 10 from CEFX. Purchased with rebuilding into SD70ACus in mind, but were used in service as-is for a time before being rebuilt.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.125 (10pcs pkg)
Juneco Scale Models C-1 Canadian National Wheel Stops (4/pkg)
HO Trinity 3-Bay Hopper - KRIX #56043
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Budd Coach: Painted, Unlettered
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
HO Intercity Bus - Teal/Cream
MODEL FEATURES:
-Rubber Tires
-Windshield wipers
-Interior Detail
-Fully assembled and ready for your layout
-Razor sharp painting and printing
PROTOTYPE AND BACKGROUND INFO:
The intercity bus was utilized by many companies beyond the typical charter bus companies. Railroads too, utilized these buses for connectivity with passenger trains. As time went on, these long-lasting vehicles were sometimes bought and sold by private owners, either in as-is condition, or fully restored with chrome and metallic paint.
EP-5 Electric Loco - DCC & Sound - Penn Central, Black #4977
Detail Variations:
With Vents
HO Model Features:
Accurately scaled from prototype blueprints
Period-correct detail options, including carbody, pantograph and hardware variations
Accurate paint and lettering
Several road numbers per paint scheme (where applicable)
Full cab interior
New Haven delivery and repaint schemes (repainted units have smaller NH logo on nose and re-positioned/larger nose road number)
Directional operating pantographs (sound models only)
DC/Silent or DC/DCC/Sound versions available
DC/DCC/Sound version features an ESU Loksound decoder with accurate -Jet- recordings
Complete lighting package including headlights, class lights, ground lights and cab interior lighting
Factory-installed MacDonald-Cartier metal couplers
PM74 Power Manager with Occupancy and Transponding detection
4 Power Manager sub-districts.
Upgraded replacement for PM42, fully encased.
Fully connectorized installation.
Each Power sub-district / Detection Section (DS) supports Auto-reverse or Short circuit management.
Each DS supports Occupancy detection.
Each DS supports Transponding detection.
Allows Mainline CV Read/Write program of compatible decoders.
Remote LED status support.
Series7 style advanced installation support using DT602.
Replaces PM42 Quad Power Manager.
N Scale Curved Track Section - 15-Degree, 11 inch Radius (4pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO Porcelain Advertising Set #1
Blair Line HO Scale Business and Storefront signs are printed in appropriate colors on thin plastic for easy assembly or placement with plastic cement or CA glue. Colorful signs are based on real signs and many include two identical signs for back-to-back, two-sided mounting. Steam and diesel-era signs make great roadside, street-side, trackside and structure details.
Tru Color Paint 044 - Acrylic -Penn Central Green 1 oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
PSC Transfer Van - Canadian National #76577
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
HO 1955 Chevy Cameo Pickup - Black, Red
This pickup is perfect for North American street and highway scenes. This detailed truck features a die cast metal body, interior seats, window glazing and authentic decoration. Perfect for rural scenes or carting loads around town, this truck is a great addition to any 1950s or later layout scene.
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Pennsylvania Rack, Trailer Train Flatcar (TTBX) #930009
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO GMD-1 - DCC & Sound - Canadian National (1900s Noodle w/ Black Cab) #1908
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
N Scale NSC 64 Ft 6000 Cubic Gondola HS - MWCX #102806
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Scale G2 AC4400CW - DCC & Sound - Union Pacific #6193
Detailed Information
UP FEATURES:
Primed for Grime
GPS pod
Replaced AC unit in UP yellow
Regular spare knuckle holder on rear pilot
The Union Pacific acquisition of the Southern Pacific in 1996 saw the transfer of SP newly acquired AC4400CWs to a new railroad. As they were essentially brand new, there was no push to repaint these units and they existed for several years without modification. Eventually the AC4400CWs were renumbered with simple patches over the SP paint, but as this was done on a unit-by-unit basis where they were, the patches all had a measure of uniqueness.
ROAD NUMBER SPECIFIC FEATURES:
#6193
Formerly SP 138; Wears two UP shields on the nose (sometimes referred to as cheek shields), UP shield on rear patched in yellow reporting marks in grey faded grey and red to represent the significant sun-bleaching these units received.
#6289
Formerly SP 289; Infamous -Flaming Patch-Job- unit with a distinctive stylized flames on rear of locomotive, Single UP shield over faded SP logo on front yellow sill stripe modern PTC Antenna boxes.
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Edge Connector for Tortoise(TM) Switch Machine w/Green PC Board (2pk)
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include servo-based slow-motion Switch Machines, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
Designed to simplify converting your existing Tortoise(TM) Switch Machine, the Edge Connector features:
- Plug and play wiring for Tortoise(TM) Switch Machines manufactured before June 2020 with smaller, tan PC board (sold separately).
- Includes 6 inch motor connection cable with plug for direct connection to Stall Motor Controller 942-161 (sold separately).
SCB Interconnect Cable Connector (Short) - All Scales Signal System
HO Magor 54ft Flat Car - Grey - Unlettered
The Rapido Trains HO scale DODX Magor Flatcar features:
FIRST TIME IN PLASTIC!
Drawn from original blueprints, measurements and 3D scans
Fully-detailed underframe including piping and equipment
Correct Buckeye 3-axle trucks with incredible detail
Trucks have friction bearings or retrofitted roller bearings as appropriate
Metal knuckle couplers
Simulated wood deck design
Loads coming soon
N Scale 1960s-1970s Hillman Imp - Assembled -- Willow Green
Tunnel Liner Form
You can cast realistic rock walls and ceilings for single or double track tunnels.
Racing Red Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO NSC 5304 Boxcar - Canadian National (Delivery w/ Green Door) #557418
The Rapido NSC 5304 cu.ft. CN Combo Door Boxcar features:
Separate grab irons installed at the factory
100-ton Barber S-2 trucks, with metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe
HO Aral Oil Tank Farm - Kit
Build a fuel depot complete with 3 different capacity cylindrical fuel tanks that are partially connected via stairways and platforms. Set includes an office container.
Athearn Roundhouse HO 50ft ACF Boxcar FEC #23127
MODEL FEATURES:
70-ton Roller Bearing trucks with 33in wheels
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separately applied brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Body mounted McHenry operating scale knuckle couplers
Wheels with RP25 contours operate on Code 70, 75, 83, 100 rail
Minimum radius: 18in
Specifications
COUPLER STYLE: McHenry Scale Knuckle
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20218
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO SD70M - DCC & Sound - Union Pacific #4477
UP FEATURES:
UP lightning stripe scheme
Early SD70M body
Nathan K-3 horn
Air Dryer
Spare knuckles on rear pilot
Prime air filters
HTCR-II trucks
EMD low plow
Red sill stripe
GPS dome
Small can & Sinclair antennas
-Under Warranty- on cab
Late style fuel tank & breather piping
This release of UP SD70Ms depicts units from the first order, with early (non-flared) SD70M bodies in their as-built appearance. For later-era operations, a consumer-applied GPS dome is included.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Flexible Self-Adhesive Paved Roadway - Unmarked
39-3/8 x 2-5/8in
(1m x 66mm)
Pave HO Scale roads, streets and highways quickly and easily with Walthers SceneMaster Flexible Self-Adhesive Paved Roadway sets! Made from a unique flexible material that is self-adhesive, simply combine straight sections, and curves, or cut to fit and press in place. Each features a realistic surface color, as well as appropriately colored centerlines and fog lines along the outside edge of the pavement for modern or vintage paved roadways.
-Model North American roads in minutes
-Realistic surface color with correct striping for US roads in various eras
-Ready to use, self adhesive and flexible - easy to add to new or existing scenery
-Mix and match with other Roadway sections, each sold separately
HO Scale H1a Hudson Steam - DCC & Sound - Canadian Pacific (Delivery) #2800
-Early walkway w/smoke deflectors
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO NSC 60ft Ingot Flat Car - Data Only
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
N Scale American Bungalow - Kit
FEATURES:
- Classic house for 1900s and later neighborhoods
- Found in many North American cities
- Perfect for modeling an entire neighborhood in city or suburbs
- Build with open or closed porch - both styles included!
- Separate one-car garage included
- Optional roof dormers for easy customizing
House measures: 3-7/16 x 2 x 2 inches (8.6 x 5 x 5cm)
Garage measures: 1-5/8 x 1 x 1 inches (4.2 x 2.5 x 2.5cm)
HO 60ft Flat Car - OTTX/Black Logo #90251
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
Dry Transfer Signs - Tavern, Gas Station & Commercial
Full-color dry transfers can be applied to a smooth or texture surface such as wood, metal or plastic by positioning the sign in the desired area, rubbing gently on the back and peeling away the carrier sheet. One 4 x 5 inch sheet per package.
HO FMC 5503 Double Door Boxcar - Minnesota, Dakota & Western #7181
Features:
Double Sliding Doors
Wire grabs
Etched parts
Plate C Box Car
X-Panel Roof
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Southern Pacific(TM) Rack / Flatcar #515436
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO 40ft Milwaukee Road Rib Side Boxcar - Hiawatha, Youngstown Door #22764
Date: BLT 9-45 TA. 9 58
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- Etched Metal Roofwalk or No Roofwalk Per Prototype
- 33 Inch Intermountain Precision Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
Plastruct 90583 UFS-4 Channel 1/8in (8pcs pkg)
Features:
Used to Brace Medium Weight Horizontal and Vertical Support Members
Precision Extruded White Styrene Plastic
Ideal for Museum Quality and Smaller Scale Models
Specs:
Height: 1/8in (3.2mm)
Width: .089in (2.3mm)
Thickness: .030in (0.8mm)
Length: 15in (375mm)
Plastruct Product Number: 90583
Norfolk Southern Locomotive Directory 2006-2007 148 pages, 6 x 9inch, softcover, 200+ photos, unit-by-unit listing of every unit on the NS roster on January 1, 2007.
HO 54ft 23K Funnel-Flow Tank Car - ADM #25602
Add variety to your modern HO fleet with these WalthersProto replicas of the 54ft 23,000-Gallon Funnel-Flow Tank Car! Packed with details including the unique funnel-shaped body that speeds unloading on the prototypes, other features include:
- One time run of these roadnumbers, order now - limited quantity available!
- Introduced in the 1960s, still built and operated today
- Prototypes handle all types of petroleum and food products
- Etched metal walkways and platforms
- Factory-applied grab irons
- Brake train pipe and brake rigging underbody detail
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling metal axles and 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Tangent Scale Models HO PS4750 Covered Hopper ROCK -Delivery Blue 6-1978
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ROCK -Delivery Blue 6-1978- is available in the Blue Original 1978 scheme. Our -R- black and white logo and blue color is stunningly executed, check it out for yourself. ROCK lettering done right is something to behold, with accurate data stencil breaks and careful duplication of ROCKs data style. This is Tangent-accurate hand-drawn artwork. We have also matched the 1978 ROCK details including body-mounted brake center sill linkage, Miner outlet gates, a Universal hand brake and matching Universal brake wheel.
Micro Mini Connectors - 3-Pin (1 set)
12 Inch Flexible Leads
Fully assembled with mated interlock assembly. Great for lighting, wiring, command control applications, special effects wiring. Connectors and attached wires have polarity markings for use as an indicator. Not recommended for powering rolling stock or other high-current applications.
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127445
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
Aluminum Mitre Box - Thin Slot
.014inch
HO Lake Forest Cottage with Accessories - Kit
FEATURES:
- Perfect for steam or diesel-era layouts
- Traditional wooden design
- Walls and trim molded in two realistic colors as one complete part
- Makes a great summer cottage, modest suburban home of company house
- Simple assembly with minimal gluing
- Includes LED interior light
- Easy-to-build plastic kit requires minimal gluing
- Includes trellis, table, umbrellas, hedges, window boxes and chairs
- Printed interior window treatments
- Molded in five realistic colors and clear window glazing
MEASUREMENTS:
4-3/4 x 2-3/4 x 3-1/2 inches
HO 36ft Old-Time Wood Boxcar - Chesapeake & Ohio #6340
Pearl Clear Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
N Scenic Accent Figures - People Sitting (6/pkg)
Woodland Scenics N Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and hand painted for extra realism. The People Sitting figure set includes six assorted adult figures in sitting poses.
HO H-6-G - DCC & Sound - Canadian National Railway (Tilted Wafer) #1403
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO Gold Series - ALCo S2 - DCC/Sound - Canadian National #8127
Built by the American Locomotive Company (Alco) the low-hood S-2 was introduced in 1940 to replace Alco?s earlier high-hood switchers. The 1000 horsepower S-2 was a turbocharged version of the S-1. There were 1,502 S-2s sold to North American Railroads. The versatility of the S-2s was evidenced by their service on class 1 shortline and industrial railroads. Atlas? version is back in service, with new tooling, as well as a sound-equipped version for modeler enjoyment.
Features Include:
- NMRA 8-Pin Socket for DCC (Silver Series Model)
- Redesigned & retooled hood, cab & chassis
- The first plastic HO-scale model of an S-2 Locomotive to include accurate body panel details
- Option for horizontal or vertical radiator shutters
- Fine scale handrails
- Separately-applied grab irons, coupler cut levers, air hoses, piping, etc.
- Redesigned truck frames with separately applied detail
- Directional LED lighting (includes cab rear headlight)
- Die-cast chassis for improved pulling performance
- Chassis retooled for optional DCC/sound
- 5-pole skewed armature motor for reliable operation
- Dual-flywheels for maximum performance at all speeds
- Factory-equipped with AccuMate knuckle couplers
- Exceptional painting and printing
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
A total of six DCC function outputs are available
Follows all NMRA DCC standards and recommended practices.
Analog (DC) Operation Features:
The LokSound Select Dual-Mode decoder allows your Atlas Gold Series locomotive to be used on DC as well as on DCC layouts.
Please note that the Atlas Quantum Engineer will NOT operate an Atlas Gold Series locomotive equipped with a LokSound Select decoder on an analog (DC) layout. However, the sound and lighting functions of the LokSound Select decoder in the Atlas Gold Series S-2 locomotive can be controlled by an easy-to-use basic DCC system
Also note that on a DC-powered layout, a DCC and sound equipped locomotive (such as the Atlas Gold Series S-2) CANNOT be consisted with another locomotive that does not
also have both DCC and sound. (This statement does NOT apply to DCC-equipped locomotives operating on a DCC layout.)
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
HO Just Plug Lighted Vehicle - Downtown Drive
Isnt he a beauty? If only mom and dad would let you borrow the car...
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
HO BiLevel Commuter Car - Altamont Commuter Express ACE (Original) Set #1
San Jose
Includes: Cab: 3305 Coaches: 3205, 3208 (Series 3)
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO SD45-2 - DCC Ready - Seaboard Coast Line SCL #2053
SCL FEATURES:
Seaboard Coast Line Predecessor Atlantic Coast Line began purchasing SD45s in 1968 and after the merger with Seaboard Airline the trend continued. By 1974 though EMD had a new upgraded version, the SD45-2 and SCL purchased 15 of them.
SD45-2 LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch - Recommended radius: 22inch
Steel Mill Ingot Molds - 2 pcs
Molds are also sold separately. Kit includes 2 ingot molds and stools
Antenna Mounting Stands - Style 1 - (2pcs)
Plaster Cloth Roll (1 roll/pkg - 8 in x 5 yd, 10 ft2)
Plaster Cloth - The original cloth. Packaged in resealable bag.
Plaster Cloth is the easy, convenient method for modeling lightweight land contours and terrain base. The plaster-coated cloth creates a durable hard shell, designed to accept Earth Colors Liquid Pigment, paints, plaster castings and landscape materials easily, with realistic results. Use to fill seams or gaps around rocks, tunnels, and terrain to blend terrain features.
HO Peterbilt 389 Sleeper Cab Tractor w/Pneumatic Bulk Trailer - Green, Black, Purple, Chrome
HO ACF 2970 Covered Hopper - CSXT #220634
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons, stirrup steps and brake wheel
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Screw-mounted express-type trucks
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO 1980 Volvo N 10 Dump Truck - Assembled - Yellow, White
This HO Scale 1980 Volvo N 10 Dump Truck by Brekina is based on the workhorse tipper-style dump truck used in North America and worldwide. This detailed model features an injection-molded plastic body with fine decoration, interior seats, window glazing and chrome-plated parts as appropriate.
Diesel Detail Kit for EMD SD50 & SD60
Make your Walthers Mainline locos even more realistic in minutes with this Diesel Detail Kit! The complete set of HO grab irons fits the standard locations on the model, and they are made of durable, factory-formed stainless steel wire. The set details one model and includes illustrated instructions.
Parts in this set include:
Fan guard grab iron
Blower duct grab iron
11 standard drop grab irons: four for short hood, seven for long hood
HO Just Plug Lighted Vehicle - Work Truck
Work is play to this truck. From sun-up to sun-down this good old boy is always on the move!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
HO F30A 50Ft Flat Car MOW w/Deck Rails - Conrail (CR MOW) #58512
This car does NOT include sleeper or camp vans
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
50Ft Smooth HC Plug Box - BNSF/Round Logo #712702
Detailed Information
MODEL FEATURES:
Former MDC tooling
Brand new paint schemes
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Separate brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister safely holds model for convenient storage
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of -In Service- equipment; -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per road number matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
HO G2 SD80MAC - DCC & Sound - CSX/YN3 #4600
CSX FEATURES:
Former CR units
Operating forward and reverse red marker lights
Correct horn and antennas per road number
Approved by CSX experts
Just as a batch of SD80MACs were sent to NS after the CR split, CSX acquired a batch as well. After a short period of running around patched, they were all repainted into CSXs -YN3- scheme. Only one, CSX 801 (which was renumbered to 4591), received the -YN2- scheme. It eventually got the YN3 treatment.
ROAD NUMBER SPECIFIC FEATURES:
#801
Fresh YN2 repaint with CR details.
#4591
YN2 paint with patched numbers
K5 horn
white painted roof with GPS dome.
#4590
YN3 repaint
-Spirit of Benning-
Leslie 3-chime horn
white painted roof with GPS dome.
#4600
YN3 repaint
K-5 horn
white painted roof with GPS dome.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
CV chart included in the box
HO EMD SD10 - DCC & Sound - Milwaukee Road #546
Milwaukee Road
- SD10 model designation given by Milwaukee Road for their capital rebuild program of their old SD7s and SD9s
- A first in HO Scale plastic models
- Single fuel tank
Chopped short hood and modified cab
- Later style Horst air intake
- Rotary beacon
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
CP Angus Van: Canadian Pacific (Engineering White) #420988
The Angus Van features:
Super-detailed underbody including all separate air and brake piping
Super-detailed Barber-Bettendorf caboose trucks
Full multi-coloured interior with proper floor texture
Interior handrails and opening windows in the cupola
See-through, etched metal end platforms and steps
Full end detail, including uncoupling levers
Separate grab irons installed at the factory
Improved, full interior lighting with all-wheel pickup and better rolling trucks
Operating red marker lights
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
HO SD70M - DCC & Sound - Lake State Railway LSRC #6431
Detailed Information
LSRC FEATURES:
Ex-UP
Small EMD front plow
Round front deck mounted ditch lights
PTC antenna array
Late EMD trucks with exposed bearings
The Lake State Railway operates 375 miles of track and is based out of Saginaw, Michigan. They recently purchased a small batch of Ex-UP SD70Ms painted into their bright new livery. The 2 numbers we are offering were the first to be repainted and often ran together in consist.
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
CSXT #811
EMD SD80MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Models equipped with marker lights will be illuminated
Rubber MU hoses for durability
All New Tooling
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
See through steps
Illuminated ground lights
Front and Rear Illuminated Numberboards
Presenting EMDs 5,000HP 6-axle diesel in a whole new level of authenticity. Starting in 1995, EMD revived the 20 cylinder engine design, last seen in the SD45, and introduced the 5,000 HP SD80MAC. Athearn is pleased to announce this locomotive in Genesis 2.0.
CSX FEATURES:
Illuminated front and rear red marker lights
Illuminated Ditchlights alternately flash per prototype w/ effect on DCC+Sound version
Four panel dynamic intake per ex CR prototype
CSX specific roof mounted antennas
Repainted roof
Digital walkway mounted fuel gauge
LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE:
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Evergreen Scale Models 4062 .060in Opeque White Polystyrene Novelty Siding (1sheet)
HO 53ft Railgon Gondola - Baltimore & Ohio #350786
(patch; black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Spray Can - Dark Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Magor 54Ft Flat Car - USAX - Delivery (Era:1953+) #38030
The Rapido Trains HO scale DODX Magor Flatcar features:
FIRST TIME IN PLASTIC!
Drawn from original blueprints, measurements and 3D scans
Fully-detailed underframe including piping and equipment
Correct Buckeye 3-axle trucks with incredible detail
Trucks have friction bearings or retrofitted roller bearings as appropriate
Metal knuckle couplers
Simulated wood deck design
Loads coming soon
HO Duplex Sleeper - Canadian National - Wet Noodle #1127 / Elmira
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
Athearn HO Scale - RTR 30,000 Gallon Ethanol Tank Car - CHSX - #255010
Detailed Information
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
HO HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Car with Load - Trash
Pick any NSC 6400 Gondola to go with your load!!
"Choose from OVR 64000 to 64127 skus"
Put Car Number in order comments!!
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites.
Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user.
Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Hand Cast Unpainted - Shaded Lamp with Wire Loop (5 pcs)
Hand cast unpainted pewter in HO scale. 6 highly detailed pieces. (non working)
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - OAKX #37
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Spray Can - Light Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
N Scale Graffiti Decal Set - Contemporary Graffiti Set #3 - Waterslide Decals
Rock Molds Wind Rock
Highly detailed, flexible and durable rock molds can be used to cast small boulders, rock outcroppings, top rocks for fields and creeks, or make entire rock faces by combining castings produced with these molds.
Light & Hub Set - Just Plug Lighting System
quick and easy way to add lights to any project - all you need is power. Set includes two warm white LED stick-on lights. Use the individual dimmer controls to regulate light brightness.
Requires power supply 785-5770 or train power pack, each sold separately. Add an optional Auxiliary Switch 785-5725, sold separately, for convenient operation.
Modelers are able to connect the Just Plug Lighting System to DCC by using a Connecting Cable (JP5760). By plugging one end of the Connecting Cable into the CTRL Port on a Light Hub (JP5700, JP5701) or Expansion Hub (JP5702) and the other end of the Connecting Cable to a DCC relay unit (per DCC manufacturer instructions), the modeler would be able to turn lights ON/Off remotely with DCC. The dimmer controls on the Light Hubs will need to be adjusted manually.
HO Flexible Self-Adhesive Paved Roadway - Cobblestone (Red)
39-3/8 x 2-5/8in
(1m x 66mm)
Pave HO Scale roads, streets and highways quickly and easily with Walthers SceneMaster Flexible Self-Adhesive Paved Roadway sets! Made from a unique flexible material that is self-adhesive, simply combine straight sections, and curves, or cut to fit and press in place. Each features a realistic surface color, as well as appropriately colored centerlines and fog lines along the outside edge of the pavement for modern or vintage paved roadways.
-Model North American roads in minutes
-Realistic surface color with correct striping for US roads in various eras
-Ready to use, self adhesive and flexible - easy to add to new or existing scenery
-Mix and match with other Roadway sections, each sold separately
Evergreen Scale Models - Opaque White Polystyrene Angle .125In x 14In (3 pcs pkg)
HO RTR ACF 4650 3-Bay Hopper - Western Pacific #11765
(Feather Logo)
Date: BLT 5-82
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO Scale Santa Fe Refrigerator Car -El Capitan #34853
RR27 CLM
Factory Workers 7 pcs
Juneco Scale Models Single Wood Box Filled (6/pkg)
HO GMD SD40-2W - DCC & Sound - CN (Non Dynamic Sergeant Stripes) #5360
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. DCC with Sound version features LokSound V5 decoder.
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
ProtoThrottle - Blue Face Plate
The ProtoThrottle Realistic Control Stand Throttle mimics a standard EMD control stand including full detent throttle and reverser handles, a spring-loaded horn handle, a push-on/push-off bell button, and fully programmable front and rear headlights with a setting for ditch lights. In addition, the ProtoThrottle comes with a robust faceplate machined from aluminum, including prototype bezels, and anodized to give the look and feel of a real control stand.
FEATURES:
- Fully wireless throttle
- Eight detent throttle handle
- Reverser handle with centered position
- Brake handle and spring-loaded horn handle
- Push-on/push-off bell button
- Front and rear headlight knobs with dim and ditch light settings
- Auxiliary buttons that can be assigned to any DCC function
- Works with any standard DCC decoder
- Interfaces to any DCC system (with separate receiver specific to your DCC system)
- Highly configurable to suit your operating style
- Designed and built in the USA!
- Securely store your throttle with the ProtoThrottle Pocket (sold separately)
- EMD-style knob and handle upgrades available from Scottys Model Shop
Specifications:
- Approximate Dimensions: 7.6(L) x 3.2(W) x 3.0(H) inches
- Approximate Weight: 15oz
- Powered by 2x AA batteries (not included)
HO 50ft Superior Plug Door Box - Canadian National #408029
MODEL FEATURES:
- All models are representative of prototypical paint schemes
- 70-ton Roller Bearing trucks with 33 inch wheels
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Separately applied brake wheel and ladders
- Machined metal wheels
- Weighted for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO GE U50 Diesel - DCC & Sound - General Electric #5000
ETA: July 2023
Detailed Information
GE FEATURES:
Beacon (Flash function in DCC only)
Classification lights (Function in DCC only)
Working Truck lights
Number board lights
Separate see-through air intake grills
MU hoses
Our Legendary Liveries series seeks to explore the -what if- questions that some folks like to indulge in. In the early 1960s GE sent their U25Bs out on demonstration tours around the country in their attractive red and white paint scheme. So, we wondered what if they had done the same thing with the U50? We think that the scheme looks rather striking on this massive beast of a locomotive. So, is your railroad interested in maybe jumping into the horsepower race?
U50 SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated classification lights
Illuminated number boards
See-through air intakes
4-cube speakers
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Four cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO B36-7 - DCC & Sound - Southern Pacific #7759
The B36-7 Locomotive features:
Incredible underframe detail including piping, a ridiculous number of separately-applied parts and full cab interior
Dead straight metal side handrails with plastic stanchions
A crazy level of road-specific detail options, with different pilots, anticlimbers, plows, fuel tanks, air dryers, antennas, wind deflectors, headlight locations, air-conditioning units, different bodies, multiple nose and rear end styles, three versions of drop step and so on...
With or without class lights (as appropriate)
Conrail locomotives come with their unique -red bug eye- marker lights
Equipped with ditch lights - on front and/or rear - as appropriate
ATSF and Southern Pacific locomotives have Stratolite beacons
Three styles of operating, flashing ditch lights, front & rear (as appropriate)
Working headlights in correct location, switchable number boards at both ends and cab interior headlight
Metal Knuckle Couplers
All units come equipped with DCC/ESU LokSound
Medium Oil Premium Hob-E-Lube (14.7 mL)
Significantly reduces the damaging effects of friction on metal to metal, metal to plastic and plastic to plastic. Good protector for metal surfaces. Helps to discourage rust, corrosion and oxidation. Good surface adhesion.
Viscosity: St at 40 degrees Celsius ...68
For use on:
- R/C linkages
- HO and larger scale model railroad side rods, gears, journals and motor bearing surfaces
- Workshop and garden tools, small appliances and casters
- Slot-car pinions and spur gears
- Precision instruments, fishing reels and office machines
HO 5820 Covered Hopper - DCLX (Dow Chemical) #7219
Era: 1988+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Atchison, Topeka & Santa Fe #88023 (ATSF Rack)
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
Norfolk Southern NS #6952
DCC-ready features Quick Plug, plug-and-play technology with 21-pin connector
- LED Headlights
NS built 4000 gallon fuel tank
Roof mounted sinclair antennas
NS designed snow plow
Different cab panel louver arrangement per prototype
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
LED lighting including:
Headlights
Illuminated deck mounted ditchlights front and rear
Numberboards
Ground lights above front trucks
Long hood mounted Nathan 5-chime air horn
Sunshades
Rounded or rectangular cab windows per prototype
Flexible rubber multiple unit (MU) hoses with silver glad hands
Flexible rubber front and rear trainline air hose with silver glad hands
Step wells feature seperately applied individual see through photo-etch steps
Coupler cut levers with loops
Anticlimbers
Safety tread on the walkways
Anti-glare panel painted on the nose
Factory applied photo-etch windshield wipers & lift rings
See through and tinted cab windows
Detailed and painted cab interior with control stand, display screens, detailed crew seats
See-through radiator fans
Factory installed wire grab irons
Fine-scale handrails for scale appearance
Underframe mounted E-bell
HT-C trucks with Timken bearings
McHenry scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18 inch
Recommended radius: 22 inch
.060in Opaque White Polystyrene Corrugated Siding (1 Sheet)
.040in (1.0mm) THICK X .060in (1.5mm) GROOVE SPACING, .02in (.50mm) RIB WIDTH
6in x 12in SHEET
Thermo King Reefer Unit - Old Style
HO 1958 Cu Ft 2 Bay Covered Hopper - Closed sides
ATSF #181840
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
N Scenic Accents(R) Figures -- Park Bums pkg(7)
HO Steam Engine Bell w/Bracket (Brass Casting) - Standard Rope Pull Type
HO Duplex Sleeper - Milwaukee Road - 1955 Yellow - Minnesota River
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO GE ES44DC - DCC & Sound - CSX/Primer #5228
ETA: June 2023
Detailed Information
CSX FEATURES:
K5HL horn
Regular bell
Low cab headlight
High mounted rear headlight
Large plow
Rear drop step
Alternating front ditch lights (Function in DCC mode)
Accurate colors and artwork
ROAD NUMBER SPECIFIC FEATURES:
#5226
As-Delivered YN3 paint scheme
#5228
Unique primer painted version with CSX logo on the nose#5245
#5245
As-Delivered YN3 paint scheme#5250
#5250
Later CSX -Boxcar- logo repaint
ES44 SERIES LOCOMOTIVE FEATURES:
Illuminated ditch lights
Tinted cab windows
Large antenna dome
GPS dome
Hand brake panel grille
Nathan K5HL horn
5000-gallon fuel tank
Low or high front headlight per prototype
See through dynamic brake intakes
Low or high front headlight per prototype
See through dynamic brake intakes
Short auxiliary cab rear left-side doors
Right side forward electrical cabinet with X-Panel
Engine compartment side grab irons (Non-CP Units only)
No engine compartment side grab irons (CP Units only)
Flush radiator compartment doors
Flush heat exchanger housing and top radiator grilles (Non-CP Units only)
Raised heat exchanger housing and top radiator grilles (CP Units only)
Dynamic brake exhaust vents spaced per prototype
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Laser-Cut 2-Lane Curved Wood Grade Crossing - 14-16in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights.
Stainless Steel Hex Nuts 0-80 - 12 pcs.
Coarse Turf - Fall Orange - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
HO 40Ft Hi-Cube Dry Containers - Maersk Line (Big Logo) (3pk) Set #1
3 pack road numbers include : MSKU 182576/196345/199339
Body: Type A
Door: Type C
Latch: Type C
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
4785 PS2-CD Covered Hopper - Early End Frame - Transport Leasing #35129
HO SD38 - DCC Ready - B&LE #866
BLE FEATURES:
Later large paper air filter box dynamic brakes, cab mounted gyra-light (upper light only), smaller fuel tank, ditch lights, no plow, rear brake wheel, extra jacking pads, yellow frame stripe, painted lower steps.
ROAD NUMBER SPECIFIC FEATURES:
#866
- Leslie 3 chime horn
- black painted left side walkway
- front and rear ditch lights
- battery danger decals
- modern loop style coupler cut lever
#867
- Leslie 3 chime horn
- front and rear ditch lights
- red coupler cut lever
#868
- Silver P3 horn and cab light housing
- Front ditch lights
- repainted nose and battery box effect
- faded lower steps effect
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO Wrapped Lumber Load for 72ft Centerbeam Flatcar - Irving Lumber
(yellow, green)
Put your railroad to work moving these Walthers SceneMaster Wrapped Lumber Loads from sawmills to local building suppliers. Made especially for the HO Walthers Mainline 72ft Centerbeam Flatcars (#910-4800 series, each sold separately) and adaptable to most cars with a similar interior length, each is pre-painted and lettered in authentic schemes, and snaps easily onto the car to add realistic detail in a matter of minutes!
HO Bi-Level Auto Rack - Transportación Ferroviaria Mexicana (TFM)/TTGX Flat Car #604079
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO 57ft Trinity 4750 3-Bay Covered Hopper - CSX #259389
FEATURES:
- One-time run of these roadnumbers, order now - limited quantity available!
- Prototypes introduced in 1990 - thousands still in service today
- Clerestory-style roof
- Late Trinity-style jacking pads and pulling tabs
- 1990s-era square cornered roof hatches
- Detailed hopper gates with vibrator brackets & outlets
- Perfect for serving Cornerstone(R) grain elevators, sold separately
- 100-ton trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
N Coupler Conversion Kit - Kato SD40-2 (2 pair)
HO 36Ft RTR 3-Dome Tank Car - SHPX #105
Product Information
Add authentic cars to your steam- or diesel-era layout with these 36Ft 3-Dome Tank Cars from WalthersMainline! Serving a wide range of both producing and consuming industries, these cars were actually three tanks in one, ideal for handling smaller amounts, and a greater variety of product at once. Features of these cars include:
One time run of these roadnumbers, limited quantity available - order now!
Prototypes hauled petroleum, chemicals and similar liquid loads in three compartments
In service from late 1920s to 1960s
Detailed underbody with AB brakes
Fully assembled
Correct 33inch turned-metal RP-25 wheelsets
Proto MAX metal knuckle couplers
HO NSC 5304 Boxcar - Canadian National (Late 80s Repaint) (6pkg)
Road Numbers Include: 557134, 557214, 557295, 557409, 557637, 557709
The Rapido NSC 5304 cu.ft. CN Combo Door Boxcar features:
Separate grab irons installed at the factory
100-ton Barber S-2 trucks, with metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe
60ft Pullman-Standard Flatcar - Ready to Run -- TTX VTTX, 20ft and 40ft container loading
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Diesel EMD SD40-2 - First Union Rail Leasing CEFX #3183
ESU LokSound DCC & Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- SP -B-70-54 Delivery 2-1970
Product: Greenville 86′ Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Southern Pacific: This B-70-54 group covers SPs first order of quad door cars that were part of the GM Stamping Pool out of Cleveland, Ohio on the B&O. The scheme, of course, is simply one of the coolest paint jobs ever applied to a Greenville 86ft boxcar. Hold this car in your hand to appreciate the nuanced differences between white stenciling and SP Lettering Gray stenciling. From the huge dark gray arrows pointing to the centered SP logo, to the smallest black door handle detail, it?s all there. The SP cars feature their as-built 1970 appearance that includes Apex crossover platforms, a Universal hand brake housing (with separate long handle!) and a Universal brake wheel. SP ordered their cars with Center-Of-Car cushioning, and we have duplicated this setup, with a complete COCC underframe and draft gear. 70-Ton Trucks with 33in wheels and rotating Timken roller bearing caps finish off this replica. These SP replicas are Ready-To-Operate in eight numbers!
N Scale Short Barrel Ore Hopper - CN Mineral Brown #346084
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Atchison, Topeka & Santa Fe #88007 (ATSF Rack)
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
Coarse Turf - Light Green - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
HO Alphabets - Extended Railroad Roman - White - Waterslide Decals
HO RTR ACF 4650 3-Bay Hopper - Western Pacific #11756
(Feather Logo)
Date: BLT 5-82
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
Bondene Platic Solvent Cement - 2oz (59.1mL)
A colorless, liquid, plastic-fusing adhesive. Dissolves a thin layer of each surface to form a welded joint as strong as the surrounding area. Bonds Styrene to Styrene, ABS to ABS and most other alike plastic combinations.
HO Gunderson Multi-Max Auto Rack - BNSF (Black Wedge) #694749
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
Evergreen Scale Models 9903 - .010in Green Transparent Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
HO Greenville 86Ft Double Plug Door Box Car - Canadian National (Delivery 10-1978) #795101
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Canadian National (CN) -Delivery 10-1978- is our first Greenville 86Ft auto parts offering in Canadian National. The CN rostered a few orders of Greenville cars, but this order for 80 cars in 1978 was the largest. The 1978 cars have body-mounted brake gear and End-of-Car Cushioning components, along with that signature 5-grab iron body that makes them stand out from any other style of 86Ft Greenville box car. Some of these cars have lasted in their original CNA brown delivery scheme for a long time - we can verify an example to at least 2016! We know this scheme is a big deal - and we thank our CN fans for their patience. We wanted to release it with the correct body grab iron details.
HO GP9RM Mother & Slug - DCC Ready - Canadian National (Early) #7240, 241
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
The GP9RM Slug features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks with outside brake shoes or Flexicoil trucks
Traction motor details on gearbox
Detailed walkway tread
Metal side handrails
Footboard pilots or curved plate pilots on appropriate road numbers
Working head lights
Both models are available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO - EMD GP35 - LokSound 5 DCC & Sound - Southern Pacific #6640
Make one of EMD's most popular roadswitcher models part of your diesel fleet in minutes with the WalthersProto(R) GP35! This series has the thinner sidesills found on Phase I C/D production units and includes:
NEW - Phase I C/D side sill
NEW - Based on units built from 1963 to mid-1965 - many still in service
NEW - High-hood Norfolk & Western and Southern Railway models
NEW - Available with LokSound 5 Sound & DCC for DCC or DC layouts
One time run of these roadnumbers, order now - limited quantity available!
Road-specific details
See-through steps
See-through radiator and dynamic brake fans w/etched brass grilles
Nose-mounted lever-style handbrake
Front and Rear (as appropriate) class lights w/separate clear lenses
Photo-etched small metal lift rings
Detailed cab interior with crew figures
Five-pole, skew-wound, high-torque, high-efficiency can motor
Helical gears with 14:1 ratio for smooth, ultra-quiet running
LED constant & directional headlights
Easy multiple-unit operation
Correct size RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
For more information see the ESU Full Throttle Quick Start Guide available here.
Road-specific features of this model include:
NEW - High short hood
NEW - Southern-style MU receptacles
Brass Nathan M5 air horn
Brass firecracker radio antenna
Short hood forward operation
Hood-mounted walkway lights (nonworking)
4 jack pads
Front and rear MU hose boxes w/footboards
MU hoses and train air line
MU receptacles
Flat air filter hatch
Standard dynamic brake
Southern-style bell bracket and bell
Flat air filter
Extended range dynamic brake
Wind deflectors
Etched metal straight edge sunshades
AAR B 9'4" sideframes w/early covered roller bearings
2300-gallon standard fuel tank w/drain pipe
HO SD60M Wide Cab Diesel - DCC & Sound - Union Pacific, As Delivered #6317
Expected in May 2022
Detailed Information
UP FEATURES:
Large EMD plow
Front ditch lights
Nose headlights
Included in this run of UP SD60Ms are both early and current versions. These locomotives were used in just about every service, hauling coal and fast intermodel, to drag freights and locals. As of a few years ago, a small batch were taken out of retirement, repainted and sent back out to work.
We are offering both as-delivered and current versions to satisfy UP modelers in different eras.
ROAD NUMBER SPECIFIC FEATURES:
#2442
Post 2018 repaints with flag and wings scheme
yellow sill
modern PTC antenna setup
Nathan M-3 horn.
#2457
Post 2018 repaints with flag and wings scheme
yellow sill
modern PTC antenna setup
Nathan M-3 horn.
#6317
As-delivered appearance in 1993. Red-sill
Leslie 3-Chime horn
fire cracker antenna.
#6364
As-delivered appearance in 1993. Red-sill
Leslie 3-Chime horn
fire cracker antenna.
LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully-assembled and ready-to-run
Replacement parts available
Minimum radius: 18inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Evergreen Scale Models 104 Opaque White Polystyrene Strips 14in .010x.080 (10pcs pkg)
HO EMD SD60M - Standard DC - Canadian Pacific #6261
FEATURES:
- Limited edition - one time run of these roadnumbers!
- Prototypes in service 1989 to the present in main line & regional service
- First SD60M safety cab with three-piece windshield
- Open grating on steps
- 21-pin DCC plug
- Same powerful drive as WalthersProto(R) locos featuring:
5-pole skew-wound motor
14:1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant & directional LED headlights
- Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately
- RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
Detail Associates 2007 HO - Cooling Fans - Q-Type 52 inch 1994
N Scale NSC 64 Ft 6000 Cubic Gondola HS - MWCX #102820
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
60ft Pullman-Standard Flatcar - Ready to Run -- Alaska Railroad
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO FCA 52ft 100-Ton Bulkhead Flatcar - CWLX (6 pkg) #2
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Includes Road Numbers:
200043
200065
200076
200086
200095
200134
Era - 2016 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
25/32 inch Vertical Railing (2pcs)
Use for hand rails, stair rails, roof trusses, grating and other steel structures. Precision Injection Molded in Styrene Plastic. May also be used for trellises, fencing window bars, etc.
SCALE
ALL
MATERIAL
STYRENE
COLOR
VARIOUS
HEIGHT IN INCHES
25/32
HEIGHT IN MM
19.8mm
WIDTH IN INCHES
1/8
WIDTH IN MM
3.2mm
THICKNESS IN INCHES
.055
THICKNESSS IN MM
1.4mm
LENGTH IN INCHES
7
LENGTH IN MM
175mm
85Ft ACF Dome Coach UP Heritage Fleet - Ready to Run - Standard - Union Pacific, Columbine #7001
(Armour Yellow, gray, red)
Product Information
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
Perfect for fan trip and excursion service
Modern-Era UP excursion scheme
Factory-Printed Car Names and UPP reporting marks
Factory-installed grab irons
Prototypically accurate window tinting
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24inch radius is recommended for operation.
Acquired as part of UPs first big dome order in 1955, Columbine was delivered from American Car & Foundry as Dome Chair #7001 in December, 1954 with seating for 42. The car is named for a UP train that ran between Omaha and Denver.
HO Gunderson 6276 50Ft Plate F Boxcar - TTX (2016) #506786
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
Acrylic Flat Colors - Flat Green - 3/4oz (23mL) Bottle
XF-5
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
Fine Red Sable Brush - Size 2
HO Utility System - Substation - Built-up
Description:
Use the HO Scale Transformer Connect Set to give the illusion of providing power from utility poles to structures. All powered structures need a power drop, and the Transformer Connect Set makes it easy to add this feature for further realism on your layout!
This Set is designed to work with the Pre-Wired Poles.
HO 50ft Evans Double-Door Plug Boxcar - Quinault Pacific/USLX #10461
MODEL FEATURES
-Fully assembled and ready for your layout
-Separately applied end ladders, brake wheel and underbody details
-Weighted for optimum performance
-Machined RP25 profile 33in metal wheels
-McHenry scale knuckle spring couplers installed
85Ft Budd 10-6 Sleeper UP Heritage Fleet - Ready to Run - Standard - Union Pacific, Willie James #202
(Armour Yellow, gray, red)
Product Information
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
Perfect for fan trip and excursion service
Modern-Era UP excursion scheme
Factory-Printed Car Names and UPP reporting marks
Factory-installed grab irons
Prototypically accurate window tinting
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24inch radius is recommended for operation.
Delivered new by Budd in 1950, this car started life as 10-6 sleeper -Pacific Domain.- Used as staff car #202 after 1972, it received the name -Cabarton- in 1980. Remodeled as a crew car with four bedrooms in 1989, it was renamed in early 2009 to honor long-time UP executive chef Willie James. Today, the car serves as a support center for the excursion trains, and includes both a large kitchen and dining/lounge area.
HO SP C-40-3 Steel Cupola Caboose - Southern Pacific (Gothic Large Modernized) #1091
1955+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
HO Scenic Accent Figures - Backyard Basics (5 pkg)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism.
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
HO GMD-1 - DCC & Sound - Canadian National (1900s Green) #1912
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
HO RTR FMC 3-Bay 4700 Covered Hopper - Western Pacific #12065
Detailed Information
MODEL FEATURES:
Separately applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, brake cylinder and triple valve
100-ton trucks with 36inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
Factory applied roof walk, roof hatch, end details, ladders and wire grab irons
Two outlet grate variations
Accurately painted and printed on a highly detailed, injection molded body
Window packaging for easy viewing
Minimum radius: 18inch
See-through etched metal end platforms
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Interior plastic blister safely holds the model for convenient storage
All 3-packs feature unique road numbers
HO Slab-Side Covered Hopper - Canadian National CN #113531
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
Model Wash - Rust - 35ml Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Rust is recommended for rust effects and winter scenes, cold scenes and decay or abandoned vehicles, metallic structures or all kind of metallic parts.
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286359
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
HO Greenville 86ft Double Plug Door Box Car - PRR #110106
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: October 2021
Pennsylvania Railroad (PRR) X60B -Delivery 1964- 1965+ Era is our first PRR offering in the Greenville auto parts world and of course PRR purchased a large group of 145 cars prior to the PC merger. Painted in the characteristic PRR freight car red colors with large PRR keystone and gold -Cushioned Load- stenciling, these cars are sure to be crowd pleasers and were seen widely. The PRR prototype car was modified in 1965, with the removal of the roof running board, the lowering of the Miner brake wheel housing and removal of high grab irons and end ladders. If you look closely, you can see all of these -remnants- on the sides and ends of the model. Even the roof on the model features the old bolt locations of the running board supports! 70T Trucks with 33inch wheels and rotating -Timken- roller bearing caps finish off this X60B offering. Our PRR masterpieces are available in six different numbers. PRR/PC/CR fans rejoice, if you model prior to about 1985 you need these!
HO Scale - 1966-77 Chevys 9500 High Mount Cab Tandem Axle Short Hood Tractor - Unpainted and Resin Cast Kit
White River Productions - Model Railroad News, May 2024
Product News
Locomotives & Rolling Stock
Vehicles & Loads
Structures, Scenery & more
Books & more
HO-Scale Reviews
German Challenger - Krauss-Maffei ML-4000 from PIKO America
Action Red Rebuild - RS-18u from Rapido Trains
Canadian Railroading for the 2020s - ET44AC from InterMountain Railway Co.
Modern RailGon - National Steel Car 3650 from Aurora Miniatures
Lumbering Giant - NSC Centerbeam from Rapido Trains
N-Scale Review
The Little Engine That Could - Whitcomb 65-tonner from PIKO America
GP7 Progresses to Sound - from Atlas Model Railroad Co
Contemporary Steam - Light Pacific from Broadway Limited Imports
O-Scale Review
Late-Era Rock Island - 50-foot Double-Door Boxcar from Atlas O
Book Review
Flour Power - Buffalo Creek Second Volume from Garbely Publishing
Columns & Departments:
Editorial & Letters
Prototype Profile - Diesel-Hydraulics of the 1960s
Timetable
Dealer Directory
Advertising Index
1956/72 IHC-190 Tandem Stake Truck - Unpainted and Resin Cast Kit
N Scale Common Standard Low Switch Stands - Kit (4pk)
HO Scale SD30C-ECO - DC/DCC Ready - Canadian Pacific #5047
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0013
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO F30A 50Ft Flat Car w/Sleeper Van - Conrail (CR MOW) #62751
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
Rapidos F30 Camp Cars Feature
All-new camp trailer loads in four styles
End railings and platforms
Photetched details
Multiple car numbers per scheme
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO Bathtub Coal Gondola - DREX (ex-CP) #1005
Built: 5-05
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO 73Ft Center Partition Car - TTX (w/Yellow Conspicuity Stripes) #857145
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
HO Assorted Vending Machines - Unpainted Metal Kit
(Ice, Soda, Gum, Popcorn)
Tangent Scale Models HO St. Louis Southwestern (SSW) B-100-26 Delivery 1970 Greenville 86ft Double Plug Door Box Car
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton Low profile Barber S-2-A
Wheels: CNC-Machined 36in Wheels
St. Louis Southwestern (SSW) B-100-26 Delivery 1970 brings one of the most-recognized paint schemes on a Greenville 86? box car to the Ford Brownstown Parts pool party. The Cotton Belt?s only group of Greenville 86ft Box Cars were delivered in March of 1970, painted in SP Scarlet Red including those aluminum doors! SP lettering gray was painted in an oval shape on the doors, leaving a huge SP in place in scarlet red. Also, the slogan HY-CUBE CUSHION-CAR along with most of the small data is accurately replicated in SP lettering gray. The COTTON BELT road name and reporting marks are accurately painted white. The prototype car featured a Center-Of-Car Cushioning underframe with 20-inch Keystone draft gear, and so does the Tangent model. The Keystone COCC system has a distinctive look ? notice how the draft gear sticks out longer than the car body. Truck-mounted brake details complete the underframe, along with corresponding truck-mounted brake beams on the 100-Ton Low profile Barber S-2-A trucks. At any angle, these B-100-26 box cars are stunners.
Tru Color Paint - Acrylic - Tuscan Red - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Code 83 Ladder Track System Turnout - #5b Left Hand Curved Diverging Track
This unique system of five different #5 turnouts allows you to make more compact yards in a given space. The system includes curved diverging track turnouts, which allow a higher ladder track angle, several lapped turnouts and a standard #5 turnout.
Turnouts feature nickel silver rail, brown ties and cast-metal frogs.
HO Slopped Bearings Cap (8pcs)
N Scale Flexi Flo Hopper (Late) - PC/CR Scale Test Cars - 2-pack
Road Numbers Include:
#80019
#80027
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
Walthers Mainline 50 Ft Post Mechanical Reefer Erie Lackawanna No.5018
- based on cars built by Burlingtons Havelock Shops
- Diagonal panel roof with separately applied exhaust stack
- Detailed plug doors, refrigerator inlet and outlet grilles
- Late improved Dreadnaught ends
- See through running board
- Highly detailed underbody with fuel tanks and brake gear
- 70 ton roller bearing trucks
- Correct 33Ft turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO SD70ACU - DCC & Sound - Canadian Pacific (Heritage Scheme) #7019
ETA: October 2023
Detailed Information:
CP FEATURES:
CP Heritage Units with -Block- lettering and alternate masking
Heritage Unit nose detail configuration
Blue flag bracket
High mounted nose door lock
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
RTR 57Ft trinity 3-unit Spine Car - TTRX #361111
Expected time of arrival : April 2021
MODEL FEATURES:
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Precision die-cast metal spine structure
Etched metal walkways
Separately applied brake piping
Highly detailed customer applied trailer hitches
53Ft trailer and container are perfect loads for the 57Ft spine car
Fine ladder detail
Weighted for optimal performance
33Inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers installed
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Machined metal wheels
Minimum radius: 20Inch
PROTOTYPE AND BACKGROUND INFO:
Intermodal transportation requires specialized rail equipment which is, on occasion, too specialized. To allow more flexibility in loading containers and trailers at terminals all-purpose spine cars were developed. These cars can be configured to allow loading of trailers of varying lengths, from 28Ft pups to 53Ft high capacity units. With the trailer hitches collapsed containers can also be loaded. 40Ft, 45Ft 48Ft and 53Ft containers call all be accommodated on these cars as well as 20Ft models provided they are mounted to a chassis.
The prototype for our model is based on a Trinity-built car owned by the TTX Company. These 70-ton cars (TTX class RAF30A) numbered TTRX 360817-361116 first appeared on the rails in the late 1990s. The Athearn model is faithful to the prototype allowing modelers to load a variety of trailers and containers.
Specifications
PROTOTYPE MANUFACTURER: Trinity
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990s+
HO GE P42DC - DCC Ready - VIA/Love The Way #908
Detailed Information
VIA FEATURES:
VIA-added extra nose light
VIA style antenna array
Dual 5-chime forward facing horns
Forward and reverse red marker lights
VIA approved artwork
Starting in 2017, VIA began to add wrapped schemes for their P42DC fleet. By 2019, -Love the Way- in both English and French was applied to a few select units with each side having a different version. In Nov. 2019, VIA applied the -Poppy- scheme, a tribute to veterans, to a small handful of units.
ROAD NUMBER SPECIFIC FEATURES:
#908
-Love the Way- scheme
English left side
French right side.
#911
-Love the Way- scheme
English right side
French left side.
#916
-Poppy- Scheme
P40DC/P42DC SERIES LOCOMOTIVE FEATURES:
Officially licensed product of Amtrak (Amtrak-painted units)
Officially licensed product of Via Rail Canada (Via painted units)
Officially licensed product of Operation Lifesaver (Operation Lifesaver-painted unit)
4 different nose variations: Amtrak as-built with strobes, Amtrak as-built without strobes, Amtrak rebuilt, and Via
Operating marker lights front and rear on Tsunami2 equipped models
Rear marker lights installed, but not connected on DCC Ready models
Newly-tooled lit number boards
Flashing strobe light and -Big-Hole- emergency light on equipped Amtrak units (Operational on DCC only)
Flashing ditch lights on non-strobe equipped Amtrak units synced with horn blow (Operational on DCC only)
Flexible rubber MU hoses
Flexible rubber trainline hose
Separately applied wire handrails
Exhaust stack
Photo etched metal radiator fan grille
Highly-detailed underframe including air tanks with air lines, air filter, and air dryer with two different types of rock shields
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting including operating ditch lights and red marker lights
Completely-redesigned die-cast frame for superior tractive effort
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
Canada Southern #3367
Bowser ready-to-run 70-Ton Offset Hoppers are based on typical cars used across the continent for hauling coal and aggregates. Layout-ready cars feature accurate decoration, molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton Offset Hopper is a great addition to your transition or classic diesel-era car fleet.
HO Enterprise 2-Bay Covered Hopper - Penn Central PC #881832
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #00066
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Tru Color Paint - Acrylic - NYC Jade Green - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 50Ft FMC 5283 DD Boxcar - Southern Pacific /Plain #244466
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Positionable sliding double doors
Body-mounted McHenry operating scale knuckle couplers
Painted and printed for realistic decoration
Precision machined metal wheels
Highly-detailed, injection molded body
Weighted for optimum performance
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
Flat Brushable Acrylic - Brown - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
HO ACF 4600 3-Bay Centerflow Hopper - Gulf Mobile & Ohio (3 pkg) #1
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
HO Dash 8-40CM - DCC Ready - BC Rail: R/W/B w/ Frame Stripe #4612
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
Models depict in-service locomotives from the mid-1990s and beyond.
Road name and road number-specific painting and lettering.
Multiple road numbers offered.
New and improved high-torque motor and drive mechanism guarantees smooth operation.**
Operating radiator fans. Improved radiator fan drive unit with quieter operation and selective fan control.**
All-wheel power pickup and all-axle drive.
Heavy die-cast, zinc alloy chassis.
AuroraJanney scale head replica couplers installed.
NMRA RP-25 wheel contour with Code 110 tread width.
Minimum radius: 18? (recommended 22?)
* Lighting functionality is limited on DC models operating on DC track power.
** Improvement over our previously-released HO scale SD60F.
DC Version Features:
DCC ready with 21MTC connector.
Dual sugar-cube speakers (functional after installation of a DCC sound decoder).
Operates on DC track.
HO RTR SW1500 Switcher - DCC & Sound - Wisconsin Central #1568
ETA: January 2023
Detailed Information
WC FEATURES:
Weed Cutter style plow
MU hoses
Whip style antenna
Flexicoil Trucks
Full Cab interior
All-weather cab window
1,100 gallon fuel tank
In the late 1990s Wisconsin Central purchased 3 ex-SP SW1500s from the Indiana Harbor Belt Railway. These three units were refurbished and repainted in WC colors.
SW 1500 LOCOMOTIVE FEATURES:
Detailed cab interior
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Drop steps unless noted
MU stands
Separately applied wire grab irons
See through radiator intake grille and cab windows
Exhaust stacks
Low or high mounted windshield wipers per prototype
Rectangular or oval builders plate where appropriate
Separately applied Air tank
Printed numberboards
Fine scale handrails
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18inch
NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
HO Scale - 50/56 Mack LH S/A Tractor- Unpainted and Resin Cast Kit
HO SD38 - DCC Ready - B&LE #867
BLE FEATURES:
Later large paper air filter box dynamic brakes, cab mounted gyra-light (upper light only), smaller fuel tank, ditch lights, no plow, rear brake wheel, extra jacking pads, yellow frame stripe, painted lower steps.
ROAD NUMBER SPECIFIC FEATURES:
#866
- Leslie 3 chime horn
- black painted left side walkway
- front and rear ditch lights
- battery danger decals
- modern loop style coupler cut lever
#867
- Leslie 3 chime horn
- front and rear ditch lights
- red coupler cut lever
#868
- Silver P3 horn and cab light housing
- Front ditch lights
- repainted nose and battery box effect
- faded lower steps effect
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO 60ft Hi-Cube Plate F Boxcar - Union Pacific #354969
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit. Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
Correct 36inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO FMC 60ft Hi-Cube Ex-Post Boxcar - CP Rail/MILW #620
MODEL FEATURES:
- Single 10ft Youngstown door
- Separately applied grab irons, end ladders, and brake wheel
- Photo-etch coupler cross-over platform
- Highly-detailed, injection-molded body
- 36 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Minimum radius: 18 inches
1/16In Fluorescent Blue Rod (10pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
BLUE
HEIGHT IN INCHES
1/16In
HEIGHT IN MM
1.6mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
HO RTR PS 4740 Covered Hopper - Norfolk & Western #176854
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Body-mounted McHenry operating scale knuckle couplers
36inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Multi-packs feature unique road numbers
Weighted for optimum performance
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
HO 40ft ACF Modernized Welded Boxcar - Detroit & Mackinac #3125
FEATURES:
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO MOBILE OFFICE CONTAINER MOBILE MINI
Features:
- All New Tooling
- Accurate Doorway, Window and Light Fixture detail
- Separately applied parts include air conditioner units and electrical equipment
- Crisp Painting and Decoration
HO Bi-Level Commuter Coach-Cab Car Set - Metra (3 pkg)
(Nippon Sharyo Type)
Road Numbers:
#6017 Coach, #6024 Coach, #8533 Cab Car
Features:
Designed from prototype drawings with the cooperation of Metra
Illuminated directional LED headlight, ditchlights, and red marker lights
Interior includes seat details and LED illumination
21-pin plug for optional DCC operation
Provision for mounting a speaker
Separately applied air horn, antenna, lift lugs, and diaphragms
Free-rolling metal wheels
Equipped with metal couplers
Recommend 22Inch minimum radius
Tru Color Paint 10401 - Weathering Set #1 - 1oz (6/pkg)
Set Includes:
TCP-349: Seasoned Brown Wood
TCP-359: Weathered White
TCP-403: Matte Mud #1
TCP-404: Matte Light Rust
TCP-408: Matte Aged Rust
TCP-433: Matte Black
HO Scale 53 Hyundai Container Early Version 2-Pack - Hub Group NS HUNU 663798/663903
Evergreen Scale Models - Opaque White Polystyrene H-Column .060In x 14In (4 pcs pkg)
HO EMD F7A/F7A Set - DCC Ready - Wabash #1169-A/#1189
Detailed Information
WAB FEATURES:
F7 Phase I
No dynamic brakes
Dual single-note air horns (A-units)
Passenger pilot
Cooling coils on roof
Wabash units 1158-1189 were delivered in 1951-52. In the 1960s, they were renumbered into the 600-726 series. Wabash 1189 has been preserved and is currently operational at a railroad museum in Illinois.
ROAD NUMBER SPECIFIC FEATURES:
#625
Nose MU connection
cut skirts
#631
Nose MU connection
cut skirts
#1169-A
Full Skirt
#1189
Full Skirt
F-UNIT SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Windshield wipers
Lift rings
Wire grab irons
Sanding lines
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Directional constant lighting
Headlight brightness remains constant
Separately-applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes & retention tanks
Speed recorder unless noted
See-through cab windows and full cab interior
Etched metal fan grilles
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO Trenton Works 6348 CN Boxcar - Canadian National (As Delivered) (6pkg) #1
6-Pack includes the following numbers, all individually packaged: #598000, 598062, 598098, 598123, 598144, 598167
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
Tin Flat Sheet - 0.032inch x 4inch x 10inch
1 piece
Length: 10inch
Width: 4inch
Thickness:0.032inch
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
HO Trenton Works 6348 CN Boxcar - Canadian National (As Delivered) #598262
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - MRRX #4814
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO 89ft Thrall Enclosed Tri-Level Auto Carrier - Norfolk Southern/ETTX Flat #33488/700392
Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these Walthers Proto models! Introduced in the mid-1970s especially to carry automobiles, the prototypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89ft flatcars with sidesill cut-outs and 28in wheels for added clearance. In service all across North America, the racks carry the owners logos, and most ride on flatcars leased from TTX with ETTX reporting marks.
A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
-Limited edition - one time run of these numbers!
-Prototypes in service from the 1970s to the present
-Factory-installed grab irons
-Separately molded and applied side ladders
-Ultra-smooth rolling metal axles with correct 28in wheels
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24in radius is recommended for operation.
HO Greenville 86ft Double Plug Door Box Car - Missouri Pacific #271513
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Release Date: August 2021
Missouri Pacific (MP) -Original 1968- represents another frequently-requested paint scheme! MP ordered five different lots of Greenville auto parts box cars, and this lot was the largest at 157 units. The prototypes were delivered with MP -buzzsaw- logos on the right side of the car, and economical -Cushion Car- lettering on the left. Of course, as any self-respecting MP modeler will tell you, there is so much more to MP lettering than slapping a buzzsaw on the car. Tangents industry-leading artwork has duplicated the distinctive and intricate MP lettering style from the reporting marks down to the smallest stencils. The cars offered in this run were assigned to Fords Chicago Stamping Pool, resulting in an accurate Chicago Heights, Illinois return route stencil. Center-of-Car Cushioning draft gear detail variation with yellow end handles? Check. Distinctive Klasing 1150 hand brake? Check. Accurate Apex crossover platforms? Check. 100-Ton -Low Profile- Barber S-2-C Roller Bearing Trucks with 36inch wheels and rotating Timken caps? Check, check and check! These cars lasted in original paint into the late 1980s and went everywhere. Our models are available with your choice of six road numbers, with three cars showing 8-68 build dates and three cars showing 9-68 build dates. Collect all six while you can!
HO 50ft Evans DD Plug Boxcar - USLX Jeld-Wen #11298
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO 12Ft FMC 5327 Plug Door Box - QGRY #77115
All new tooling with accurate dimensions
Photo-etched cross-over platform
Separately applied grab irons, end ladders and brake wheel
33in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
All models are representative of prototypical paint schemes
Minimum radius: 18in
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of ?In Service? equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
PROTOTYPE AND BACKGROUND INFO:
It was the mid 1970s, and the incentive per diem box car boom was just beginning. New, brightly painted box cars seemed to appear overnight. Many were lettered for various short lines. FMC (Food Machinery Corporation) was a significant builder of many of these cars. The 50? outside post, non-terminating end box car, became the foundation for new per diem cars built in the 1970s. The 50? FMC cars also varied in door configuration and style to better suit each customer. These models can still be seen today in the modern railroading scene.
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Trailer Train (brown) #90585
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 85ft ACF 48-Seat Diner - Union Pacific (City of Los Angeles) #4808
Union Pacific Heritage Fleet
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
Two 48-seat dining cars have been named for UPs flagship Streamliner, The City of Los Angeles. Both were delivered new in 1949 from American Car & Foundry. The current car, #4808, was acquired from Northern Rail Car in 1991.
GP39-2 Diesel, DCC & Sound - RDG #3407
ETA: October 2021
Detailed Information
RDG FEATURES:
Reading style cab roof rain gutter
2900 gallon fuel tank
Cab wind deflectors
Ratchet style hand brake
Electrical cabinet door on engineers side
In 1974 Reading received 20 GP39-2s from EMD. During their short careers on the Reading these 2300 HP, 12-cylinder turbocharged units were used system wide in all types of service, including coal and ore trains, hot shot freights and locals.
LOCOMOTIVE FEATURES:
All units are powered
Heavy die-cast frame for greater traction and more pulling power
DCC-ready features Quick Plug plug-and-play technology with both 21-pin connector (DCC-Ready only)
Factory installed SoundTraxx Tsunami2 sound and DCC decoder (DCC+sound units only)
Tsunami sounds are compatible with both DCC and DC operation (DCC+sound units only)
Genesis driveline with balanced five pole skew wound motor and dual flywheels
Directional constant lighting-featuring LEDs; headlight brightness remains constant
Scaled from prototype resources including drawings, field measurements, photographs, and more
Separately applied photo etched metal and injection molded detail parts:
Cab interior
Coupler cut levers
MU and Trainline hoses
Windshield wipers
Lift rings
Wire grab irons Sander lines
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body mounted McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Detailed Blomberg-B trucks with prototype-specific wheel bearings
Replacement parts available
Minimum radius: 18inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 decoder pre-installed
Sound units operate in both DC and DCC
Individual sound boards installed in both A and B units (sound units only)
All functions NMRA compatible in DCC mode
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Slow speed control
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Lighting effects such as beacons and Gyralight where prototypically accurate
A and B units often include sound decoders with different default pitch shift, so MU lashups sound unique
PROTOTYPE SPECIFIC INFORMATION
In the decade between 1974 and 1984, EMD produced the GP39-2 for seven North American railroads. The basic design followed most four axle road diesel switchers for the time. Borrowing improvements from the GP38-2 and GP40-2 designs, this mid-horsepower road switcher utilized a turbocharged 12-cylinder EMD 645E3 diesel engine for its prime mover. With 4 fewer cylinders, the smaller engine provided a distinctive long hood on the phase II and phase III bodies, where the clean room/engine compartment doors were set back from the cab further than predecessor locomotives.
Sensitivity to fuel economy in the 1970s justified the GP39-2 in the locomotive market. It also laid the ground work for EMD to start exploring locomotive designs that utilize engines with larger piston displacement yet possess fewer cylinders. This approach has become the foundation to modern locomotive technology.
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504837
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
HO EMD SD70ACU - DCC Ready - Canadian Pacific CP (Two-Tone Gray) #7023
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
HO GE C30-7 - DCC & Sound - Norfolk & Western (Black Scheme) #8044
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
HO Coarse Turf - Burnt Grass
HO RTR Thrall 5-Unit Rebuilt 40Ft Well Car - Trailer-Train DTTX #740841 A-E
(yellow, Large Black & White Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft on both single and five-unit cars. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers - limited quantiuty, order now!
100- and 70-ton roller bearing trucks
Correct 36inch and 33inch RP-25 turned metal wheelsets
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
Proto MAX(TM) metal knuckle couplers
Kato 176-5626 N Scale EMD SD90/43 Mac Standard DC - Canadian Pacific #9136 (red, white, gold)
Meticulously detailed model features authentic paint and lettering plus five-pole motor with dual brass flywheel.
HO Double-Track Concrete Viaduct - Variable Height
Features:
Available in single track or double track widths
Kit contains single arch and two half-arch ends - combine kits for longer applications
Can be used w/o pier units for lower heights such as in urban settings
Concrete double track viaduct also suitable for O scale single track applications
Length - 18inch
Width - overall (Single) = 3 1/4inch, (Double) = 5 1/4inch
Width - btw. walkways (Single) = 2 1/8inch, (Double) =4 1/8inch
Height (w/ piers) - to deck = 9 5/8inch, to top of railings = 10 3/8inch
Height (w/o piers) - to deck = 3 1/2inch, to top of railings = 4 1/4 inch
Brass Strip - 12inch x 1/2inch x .064inch
Length: 12inch
Width: 1/2inch
Thickness:0.064inch
50ft Ext Post High Cube Plug Door Box - Wisconsin Central #1739
MODEL FEATURES:
Former MDC tooling
Brand new paint schemes
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Separate brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 18inch
HO 60ft Bulkhead Flatcar - PGE #16021
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
Peel n Place Tufts - Yellow Seeding Tufts
The Woodland Scenics Peel n Place Tufts allow you to model a variety of grassy plants often found in fields, meadows and pastures. Available in several styles of grasses and flowers, these tufts are ready-made and can be used right out of the package. Simply peel the tufts from the tray and place them where desired. Combine Peel n Place Tufts with other Woodland Scenics scenery materials to enhance your layout.
N Harrisons Hardware - Built-&-Ready(R) Landmark Structures(R) -- Assembled
Product Information
Stores like Harrisons were just about the best place to find anything you might need! A great addition to any street scene, this commercial building comes with colorful signs, a dumpster and merchandise piled out front for display.
2-1/2 x 1-31/32in 6.4 x 5cm
Morgan Olson Route Star Van - USPS
Modernize HO highways in minutes with these new Morgan Olson(R) Route Star Van replicas! Based on the popular delivery vehicles seen from coast-to-cast, these layout-ready models include a wide range of details and colorful printed graphics. Check out these other great features:
Newly tooled officially licensed replica!
Contemporary delivery vans and food truck versions!
Five authentic body styles with correct rear doors
Prototypes seen all across North America serving small businesses & fleet operators
Fully assembled
Full-color graphics
Detailed driving compartment w/interior bulkhead
HO GMD SD40-2 - DCC & Sound - Canadian Pacific (Block Lettering) #5901
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars,
operating headlight, window glass, road name specific details, roadname specific fuel tanks,
can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC,
DCC with Sound version features LokSound Select decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
N Scale Single Track Truss Bridge 9-3/4in (248mm) - Silver
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly.
The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO VIA HEP2 Coach: VIA Rail - Current Scheme (Grey): #4009
VIA Rail HEP2 Current Scheme Business (Grey) (2020 to Present)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX 15000 Series 6 Pack
15110,15155,15164,15201,15246
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 50ft Covered Gondola - SOO #67470
MODEL FEATURES:
- 70-ton Roller Bearing trucks
- Removable cover
- Separately-applied brake wheel
- Weighted for optimum performance
- 33 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Body-mounted McHenry operating scale knuckle couplers
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inch
PROTOTYPE AND BACKGROUND INFO:
Gondolas are low-sided railroad cars that are used for hauling bulky loads that don not need protection from the weather. The Roundhouse 50ft gondola is representative of larger cars that began appearing on the rails in the early 1950s, and many survive today working for modern roads and contractors.
HO 36 Inch High Detail Semi-Scale Insulated Brass Wheelsets (12/pkg)
The front and back profile of these wheels is more prototypically accurate.
These wheels follow NMRA RP-25 Standards.
One wheel is insulated from the all metal axle.
The entire wheelset is non-magnetic.
The axle length is 1.006in (+- .004in).
#402 Roundhead Stainless Steel Screws 0-48 x 1/4 inch - 12pcs
Correct screw size diameter and length to mount Kadee Coupler boxes to bottom of freight Cars
HO Steam Heater Car - Algoma Central #72
FEATURES:
- Numerous popular paint schemes
- Scaled from field measurements and original blueprints
- Steam sounds included, with user-controlled volume
- High-quality, high-bass speaker
- Works on DC and DCC layouts
- Super-detailed underframe and express trucks
- Working backup lights, controlled by magnetic wand
- Metal Macdonald-Cartier couplers
Steam Heater Cars, known in Canada as Steam Generator Units or SGUs, were introduced in the diesel era to provide steam heat to passenger trains in cooler weather. When passenger trains were hauled by steam locomotives, there was always a reliable source of steam. Unless a diesel locomotive was equipped with a boiler and water tank, heat could not be provided! This was before the days of electrical Head End Power for passenger cars. Heater cars were frequently rebuilt from boxcars, B-units and old steam locomotive tenders, so they varied in shape and size from railroad to railroad. That is, unless you are in Canada. It is so cold here so much of the time that purpose-built SGUs were built by CCandF (Canadian Car and Foundry), GMD (General Motors Diesel Division) and NSC (National Steel Car).
HO Brake Vent Valve - Regulator pkg(2)
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX Data Only
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO Scenic Accents - Swingin Sensation (6pcs)
Four couples cutting a rug, jivin and boogieing to the beat the band!
HO SD70 - DCC Ready - Norfolk Southern #2567
NS FEATURES:
Acquired by NS after 1998-1999 split of Conrail
Antennas and conduits on cab and long hood
Nathan K5LAR24 horn
Cab vent
Air Conditioner
Small front plow
-Dual- fuel sight glasses
Late fuel tank
Spare knuckle brackets on rear pilot
This group of former Conrail SD70s joined the NS fleet in 1998 because of the split up of Conrail between NS and CSX. Early repaints featured diagonal dashes along the frame.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
N Scale ACF Type 27 Riveted 8,000 Gallon Tank Car - Champion Oils / Sterling Fuel #6020
HO 50ft PS 5344 Boxcar - MMA #15288
MODEL FEATURES:
-Decorated models fully-assembled and ready to run out of the box
-Highly-detailed, injection-molded body
-Separately applied wire grab irons
-Separately applied brake wheel and end ladders
-Etched end platforms
-Machined metal wheels
-Weighted for trouble free operation
-33in solid nickel silver wheels with RP25 contours operate on all popular brands of track
-Body mounted McHenry operating scale knuckle couplers
-Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
-Replacement parts available
-Minimum radius: 18in
PRIMED FOR GRIME MODELS FEATURE:
-Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
-Faded base colors matched to the prototype
-Patches applied and shaped per road number matching each corresponding side to the prototype
-Perfect starting point for adding grime and rust
PROTOTYPE AND BACKGROUND INFO:
It was the mid 1970s, and the incentive per diem box car boom was just beginning. New, brightly painted box cars seemed to appear overnight. Many were lettered for various short lines. Pullman Standard (PS) was a significant builder of many of these cars. The 50ft outside post, non-terminating end box car, became the foundation for new per diem cars built in the 1970s. The 50ft PS cars also varied in door configuration and style to better suit each customer.
Today box cars still matter to the railroads. Even with modern containerization, box cars have a higher capacity then allowable on US roads. We are finding today, that 1970s box cars are being rebuilt and put into service for various leasing outfits. These models can still be seen today in the modern railroading scene.
HO 60ft Hi-Cube Plate F Boxcar - TTX/TOBX #889069
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline(R) 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Plastruct 90481 N ABS Stair Rail (2pcs pkg)
SCALE
N
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/4
HEIGHT IN MM
6.4mm
WIDTH IN INCHES
7/16
WIDTH IN MM
11.1mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
3-5/8
LENGTH IN MM
90mm
USE DESCRIPTION
ABS STAIR RAIL Use for hand rails on stairways. Precision Injection Molded in Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is critical. High impact character
50Ft Smooth HC Plug Box - BNSF/Round Logo #712702
Detailed Information
MODEL FEATURES:
Former MDC tooling
Brand new paint schemes
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Separate brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister safely holds model for convenient storage
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of -In Service- equipment; -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per road number matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
7/32 inch OD Round Aluminum Tube 0.014inch Thick x 12inch Long
Round Aluminum Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 7/32 inch
HO RTR ACF 4650 3-Bay Hopper - SOO Line #74177
Date: BLT 11-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
Linker Plugs
HO EMD SW9/1200 - LokSound 5 Sound & DCC - Undecorated
Working freight yards, passenger terminals, branch lines, short lines or heavy industry WalthersProto(R) SW9 - SW900 - SW1200 diesels are perfect power for any HO operations. Fully assembled with superb road-specific details and authentic paint and lettering, features of each replica include:
- One time run of these roadnumbers, order now - limited quantity available!
- Based on SW9, SW900 and SW1200 units (as noted) in service 1954 to present
- Used by dozens of railroads, short lines and industrial operations
- ESU LokSound 5 sound for DCC and DC layouts
- Road-specific details
- Detailed cab interior w/seats and crew figures
- Sill- or hood-mounted handrails as appropriate
- Factory-installed wire grab irons
- 5-pole, skew-wound, high-torque, high-efficiency can motor
- Helical gears with 14:1 ratio for smooth, ultra-quiet running
- LED constant and directional headlights
- Easy multiple-unit operation
- Heavy die-cast metal underframe
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
A perfect starting point for a custom build, this model includes the following detail parts:
- NEW - All-weather windows
- Hancock air whistle & A200-156-CA air horn
- Hood-mounted handrails
- Front and rear footboards
- Drop steps
- MU hoses and stands
- 5- and 6-louver battery boxes w/step
- Six styles of spark arrestors
- Multiple headlight options
- 4 wind deflectors
- Etched metal angled and rectangular sun shields
- Round roof-mount cab vent
- AAR Type A sideframes with plain bearings or two styles of roller bearing journals
- 600- and 930-gallon style fuel tanks
HO Greenville 86ft Double Plug Door Box Car - Union Pacific #980306
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Release Date: October 2021
Union Pacific (UP) BF-90-5 -Delivery 1969- represents another frequently-requested paint scheme! Accurate Union Pacific armour yellow box cars are extremely rare in any scale, but here they are from Tangent Scale Models! UP ordered two different lots of Greenville auto parts box cars, and this lot was the earlier of the two orders. The prototypes were delivered with very large UP 1960s stencils ? the largest -Union Pacific Railroad-logo you will ever see, plus the largest -automated rail way- and -Cushioned Load- map logo that we very carefully recreated from the Greenvilles adaptation of the original Union Pacific plans. It is these sort of small details that Tangent pays attention to ? not all railroad graphics are consistent from car builder to car builder. Another cool stenciling thing about these cars? Like ATSF, UP has a stencil that explicitly says -Auto Parts- on the side. Return stencils are of course present on these cars: -When empty return to GTW RR Pontiac MICH.- The underframe features accurate End-of-Car Cushioning details and this UP replica rides on accurate 100-Ton -Low Profile- Barber S-2-C Roller Bearing Trucks with 36inch wheels, rotating -Hyatt- caps and truck mounted brake details. Collect all six while you can!
HO F89-F Bi-Level Auto Rack - New York Central/BTTX #913211
Detailed Information
MODEL FEATURES:
Die-cast underframe
Authentic undulating safety railing
Accurate Whitehead and Kales Auto Rack
Early or late train lines and cut levers per prototype and era
Customer installed end bridge plates (included in box where applicable)
Detailed deck
Wire-formed brake plumbing
Separately applied hand brake per prototype
Separately applied wire grab irons where applicable
Prototypical ride height
70-Ton roller bearing trucks with animated rotating bearing caps installed
Trucks with animated rotating bearing caps
Minimum radius: 22inch - Recommended radius: 24+inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
HO EMD SW9 - DC/ Silent - Santa Fe (ATSF Bookend Scheme) #2432
Santa Fe:
Delivered in 1953
Unique stepped louvers on hood
-Trash can- style spark arrestors
Large cab sunshades on front and rear cab windows
Carbody handrails
Working Pyle 360 warning light
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
Parking Meter pkg(14) - Zinc (silver)
HO Single BiLevel Commuter Car - UTA FrontRunner - Unnumbered Coach
Salt Lake City - Series 4
Note: Unnumbered coaches do not include decals. Decals are available from highball graphics.
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO Roof Top Wooden Water Tank Kit - Set of 3
Add our real wood water tanks to the roof tops if your buildings.
Easily paintable with water based acrylics.
Our kit builds into ...
- 3 detailed Roof Water Tanks
- Each approx. 0.75W x 2.5H (inches)
- Real wood tank with laser engraved Staves & Bands
- Optional Concrete Base
- Access Ladders
- Colour instructions
This is the same Water Tank as in our HO scale Roof Top Detail Kit.
HO Railroad Car Shop - Kit
DIMENSIONS:
11-5/8 x 8-13/16 x 7-5/8 inches (29.5 x 22.4 x 19.4cm)
Track center lines 2-3/4 inches (70mm)
The prototypes for railroad buildings like the Walthers Cornerstone HO Scale Car Shop evolved into long, specialized structures dedicated to freight or passenger car repairs. Several tracks ran the entire length of the building so cars could be moved quickly between workstations handling trucks, brakes, interiors and other appliances. Perfect for servicing any kind of equipment, this kit features a modular design so several can be combined to build a larger building, and its a natural for modeling all kinds of heavy industries.
Without the car shop, a railroad just does not run. Big enough to look right, small enough to fit steam- or diesel-era layouts, this model is packed with features. Detailed brickwork, an authentic saw-tooth style roof with skylights, separate windows, roll-up doors, openings in the floor for rail, everything right down to the decals, is included.
- 3-stall brick Car Shop
- Modular design allows kits to be combined for a larger complex
- Saw-tooth style roof
- Great for steam or diesel-era layouts
- Molded in appropriate colors and clear plastic
HO AutoFlood III RD Coal Hopper - GLFX #8058
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO 68Ft Bulkhead Flatcar - TTX #804299
Features:
Side stake pockets
Simulated tie-loops
Fishbelly center-sill
Prototypical pull-plates and lift rings
HO RTR 40Ft Single-Door Steel Boxcar - Boston & Maine #73159
(blue, black, white)
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. Check out the entire line of Bowser HO Scale ready-to-run boxcars.
HO EMD GP35 - Paragon4 Sound/DC/DCC - CB&Q #989
(Chinese Red)
Ubiquitous on American railroads, the EMD GP35 is a 4-axle diesel-electric locomotive built by EMD and subsequently General Motors Diesel in the mid 1960s. Over 1300 of these locomotives were produced, and they were operated by virtually every major railroad in the United States. Additionally 26 units were built for Canadian railroads and another 57 units were built for Mexican railroads. These freight locomotives were powered by EMD 567D3A 16-cylinder engines that generated 2500 horsepower.
List of individually controllable lights in our EMD GP35 models:
- Headlight
- Rear Light
- Mars Light (SP only)
- Numberboard Lights (Front & Rear)
- Front Classification Lights
- Rear Classification Lights
- Emergency Light (SP only)
- Rotary Beacon (where appropriate)
- Ditch Lights (where appropriate)
- Cab Light
Road-specific detail options that are prototypically accurate for each road name:
- Truck sideframes
- Dynamic brake hatch
- Open & closed type fans
- Short hood detail arrangement
- Long hood end detail arrangement
- High short hood option where accurate
- Horn type and location
- Bell location
- Multiple front pilot types
- Multiple rear pilot types
- Accurate cut lever types
- MU receptacle arrangement
- Multiple sunshade options
- Antenna type and location
- Wind deflector type
- Rooftop AC for ATSF type
- Rotary beacon type and location
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up
- ABS Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, Wipers, and Etched Metal Grills
- Prototypical Light Operation - accurate for each paint scheme
- Prototypically Accurate Sounds for the EMD GP35 Diesel Locomotive
- Metal Kadee-compatible Couplers (2)
- Will Operate on Code 70, Code 83, and Code 100 Rail
- Minimum Operating Radius: 18 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
HO EMD SD10 - DC/Silent - SOO Line #543
SOO Line --Conditional Announcement--
- Ex-MILW units / same features
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Black Chain 12inch-6 Links per inch Brass
Brass Chain (12inch) - Used to tie down open loads on freight cars, vehicle trailers and locomotive handrails.
HO Union X-3 Tankcar - Procor Limited #32172
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
Budd Baggage-Dorm Original Scheme - VIA Rail #607
Each Baggage-Dorm includes:
Realistic stainless steel finish
Track-powered interior lighting compatible with DC and DCC layouts
Full underbody detail including separate air, steam and electrical lines
Separate metal grab irons, stirrups and end gates
Accurate D22 brake equipment and piping
Super-detailed 41-NDO-11 trucks with end frames
Full, multi-color interior detail
3D CP beaver shields on CPR models - not just a printed picture!
Sprung diaphragms
Metal Macdonald-Cartier knuckle couplers
PS-2 2003 2-Bay Covered Hopper - Northern Pacific #75403
MODEL FEATURES:
- Fully assembled and ready-to-run
- Photo-etched roof walks
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Weighted for trouble-free operation
- Window packaging for easy viewing
- Interior plastic blister safely holds the model for convenient storage
- Body mounted McHenry scale knuckle spring couplers
- Machined metal wheels with RP25 contours operate on all popular brands of track
- All 4-packs come with unique road numbers
Spray Can - Light Green (Germain Air) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0010
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale RTL Turboliner - DCC & Sound - Amtrak (Phase III Early) Set #1
Set #1 Road Numbers:
150, 170, 171, 172, 151
The Rapido N Scale Rohr Turboliner features:
Accurately designed using original blueprints and field measurements
Tinted windows, interior details and flicker-free interior lighting
Separate factory installed grab irons
Highly-detailed trucks including third-rail shoes
Working headlights, marker lights and cab-mounted strobe lights
Both Power Cars come with smooth, reliable drive systems for optimal performance
DCC models feature ESU sound decoders in each power car with accurate sounds sourced and remastered from original videos
All wheel electrical pickup. Yes, we mean every ... single ... wheel!
Rapido Trains Inc. is pleased to bring speed to the rails with the Amtrak Rohr Turboliner in N Scale!
In the early days of Amtrak, efforts were made to improve passenger services along key corridors. Following the success of the French-built RTG Turboliners in the mid-1970s in the Midwest, Amtrak turned to Rohr Industries in California to build modernized Turboliners for use along the Empire Corridor.
Entering service starting in September 1976, these new RTL Turboliners quickly proved their value, bringing passengers back to the rails. Equipped with third-rail shoes, they operated on electric power through New Yorks Grand Central Terminal (and later Penn Station), switching to gas-turbine power once out of New York City. Painted in Amtraks stunning red, white and blue Phase III paint scheme, they operated on most Empire Corridor services, as well as regular appearances on the Adirondack to and from Montreal in the early years. Occasional equipment needs even put the Turbos on other rare adventures outside their normal call of duty, including the Niagara Rainbow to Detroit via Southwestern Ontario, and the Maple Leaf to Toronto via Niagara Falls.
After nearly 20 years of service under their belts, Amtrak selected one RTL set in 1994 to be rebuilt into what would be called the RTL-II, incorporating several improvements including new turbines, a remodelled interior, a striking new demonstrator paint scheme, in addition to extending the lifespan of the set for several more years. While this set continued in service until 2003, no other RTL-II sets were ever commissioned.
Further redevelopments and improvements of the fleet into the RTL-IIIs was never fully realized, and all were retired from active service in 2004. Conventional equipment has since been utilized on the Empire Corridor services in place of the once mighty Turboliners.
1952 Ford/Cab Over Engine/Railway Express Truck - Unpainted and Resin Cast Kit
HO Two-Car Garage - Kit
3-1/8 x 3-1/8 x 2inch (7.9 x 7.9 x 5cm) over eaves
Perfect for any suburban scene from the 1950s to the present the new HO Cornerstone Two-Car Garage looks great alongside city or country homes. Features of this detailed structure kit include:
Easy upgrade for older or newer homes from the 1950s to the present
Customize in minutes - build with one large or two small overhead doors - both included!
Detailed interior wall framing
Separate entry door and small windows
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23074
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Value Line RTR - 13 Panel Coalporter - CSXT (Black) #385155
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO Dash 8-40CM - DCC & Sound - Canadian National: Stripes #2401
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
HO Scale G2 AC4400CW - DCC & Sound - CEFX #1002
Detailed Information
CEFX FEATURES:
Nathan K-3 Horn
Late body features
Late radiator lift rings
Evenly spaced rear grab irons
Engine air intake moved rearward
Notched fuel tank
Tank welded to underframe
Long handrail on left jogs over capacitor box
Double rail behind cab on left side
AAR style control stand
Electric air dryer
GE Hi-Adhesion trucks
Outside struts on opposite sides of trucks
Front ditch lights
The CIT Group placed two orders late in the production of the AC4400CW. They represent some of the newest features added to the AC4400CW line before its discontinuation. The first group was purposely built with Union Pacific features to whom they were originally leased. The second group was leased to the Canadian Pacific and share spotting features with late model CP AC4400CWs. Both wear CIT Groups distinctive -Blueberry- scheme with CEFX reporting marks.
ROAD NUMBER SPECIFIC FEATURES:
#1002
GPS Dome
High number boards
#1020
GPS Dome
High number boards
#1048
Sinclair Antenna package
Low number boards
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Evans X72 Box car: Penn Central w/ Small Logo - Single Car #269447
Detail Variations:
As operated between 1973 to 1976.
6-pack includes the following numbers:
#266500
#266822
#266899
#269175
#269447
#269990
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
HO High-Level Switch Stand Kit - Rigid .190inch Travel w/Selectable End Fittings
Product Information
Easy Manual Turnout Control Without Touching Your Rails
Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw. Molded on pin for direct mounting. All 100 series (Rigid) stands require modelers to fabricate a spring connecting link between the stand and the turnout. All 200 series units (Sprung) have internal springs so they can be connected directly to the turnout throwbar. Measurements indicate the maximum amount of side-to-side travel when the lever is thrown.
Operating high level switch stand is based on prototypes used by many roads. Working parts are Delrin. Also includes six targets, nonworking lantern and square diamond made of ABS plastic. Manual target can be adapted to work from an electric switch machine (sold separately) below the benchwork. .190inch travel. Kits now include a shim to raise the stand to tie level, along with five different fittings for use with most turnouts, including Atlas, Roco, Peco, Micro Engineering and Shinohara.
Photos shows Lantern with red & green jewels, sold separately.
Use 947-1196 Brass Wood Screws pkg(24) #1; 3/8 x .070inch to mount turnout to table.
Use 947-1195 Brass Wood Screws pkg(24) #0; 3/8 x .060inch to mount turnout to table.
HO 40Ft PS-1 Boxcar - Norfolk & Western (Black Repaint) #42278
Date: NK 9-73
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
RS Straight Grabs - pkg(16)
HO Brick Craneway Base and Street
A common sight in the older industrial areas of many cities and towns, or an historic restoration in the present, this Cornerstone kit makes it easy to add authentic brick paving with a craneway and center rails to your HO docks, shipyards, and heavy industries of all kinds. The kit features:
-Parts for three complete sections totaling 37-7/8inch (96.2cm) long
-Matches paving from Traveling Crane with Brick Streets 933-4096, sold separately
-Center paving section accepts Code 83 rail (sold separately)
-Molded in gray plastic (photo shows model assembled and painted)
-Each section measures 12-5/8 x 5-1/2inch 32 x 13.9cm
N Built Ups Sunny Days Trailer
N Scale Short Barrel Ore Hopper - CN Mineral Brown #346020
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO 2010 International Lonestar Sleeper-Cab Semi Tractor - Assembled - Metallic Blue
The Brekina 2010 International Lonestar Sleeper-Cab Semi Tractor is based on prototypes produced beginning in 2009 by the GM Coach and Truck Division. These tractors have been produced in Canada, the U.S. and Mexico for use across North America for hauling trailers over the road. This International Lonestar model features a detailed injection-molded plastic body with fine decoration, interior seats and window glazing and chrome-plated parts as appropriate. This model is ideal for your 2000s and later street and highway scenes. The International Lonestar Sleeper-Cab Semi Tractor is one of many Brekina HO Scale truck models.
40Ft Corrugated Container Uniglory 2 pk
8159858(1) and 816309(3)
HO 60ft PS Flatcar - Trailer Train/HTTX #90820
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO USRA Single-Sheathed Boxcar: Maine Central
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Spray Can - Neutral Gray (USAAF) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
UPS Freight - Grey, Gold, Brown
Expected Delivery: February 2020
Product Information:
Licensed replica of popular International(R) trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled & painted
Die-cast metal and plastic parts
This medium-duty truck line was introduced in the late 1980s. Powered by a Navistar DT inline six-cylinder diesel engine capable of up to 350 horsepower, the 4900 series has been a great starting point for a wide range of commercial vehicles, including delivery vans, single- and dual-axle semi tractors, as well as fire apparatus and other government applications.
Monroes Drive In
Woodland Scenics HO Scale Just Plug Lighted Billboards are an easy way to add lighting effects to your layout. Whether along a rural highway, on city rooftops or on busy streets they add flair to any scene. Used as signs for advertising local shops and destinations, they are staples across North America. Designed to work with the Just Plug Lighting System.
Each Just Plug Lighted Billboard includes factory-installed LED lighting drawing just 20mA.
-Warm white LEDs
-Easy installation
Diesel Locomotive Winterization Hatch - 48Inch FAN - GP60 & SD60 - pkg(1)
HO 40Ft PS-1 Boxcar - Ann Arbor (Direct Route) #1409
Date: BLT 4-57
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
Road Number Specific Details:
#1401, 1405, 1406
Have Pullman 8Ft Raised Panel Door
#1402, 1404, 1409
Have Pullman 8Ft Corrugated Door
HO - ACF 5250 CF Hopper - Rock Island #13979
Plastruct 90102 O D 1/16 Butrate Coated Wire (12pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
WHITE
OUTSIDE DIAMETER (O.D.)
1/16
1.6mm
INSIDE DIAMETER (I.D.)
N/A (wire inside)
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
BUTYRATE COATED WIRE Use for piping industrial, residential, commercial and many other model settings. May also be used as round pylons in bridge, pier and other structures.
DCC Specialties RRamp Meter V1
- The only inexpensive device that accurately measures DCC Volts/Amps.
- Also measures AC and DC Volts/Amps.
- Costs less than DVMs that cannot measure DCC. Ver II rated at 10 Amps
- Measures true RMS Volts/Amps, +/- 2%.
- Suitable for all scales.
- No batteries required.
- Designed for Left/Right-hand use.
- PCB length 5.63 inches
HO 36ft Galvanized Steel Stiffened Backdrop Grain Bin - Kit
(Narrow - 2.66 inch Corrugation)
(NOTE: this backdrop bin is not a full round bin - it is cut 4ft beyond halfway to simplify placing the bin against a flat backdrop while still allowing room for the walkways, conveyors, and other equipment at the top.)
Corrugated steel grain bins are a staple in any agricultural setting, placed on farms, elevators, industries, and beside railroad tracks. Used with a variety of farm commodities, these bins provide a safe, dry place to store that commodity until it goes to market.
With several styles to choose from, these grain bins will look right at home on your layout. They feature prototypical corrugations, realistic galvanized steel appearance, various side sheet heights, and a variety of diameters.
Narrow corrugation bins have corrugations spaced a scale 2.66 inches and the rings are 32 inches tall. Wide corrugation bins have corrugations spaced 4 inches apart with 44 inch tall rings.
All bins are easy to assemble - just stack the rings, glue them together, attach the roof and you are done! Every ring comes as one solid piece, so no time consuming and messy assembly of individual side sheet pieces to create each ring, saving you time and frustration!
What size bin will fit your space? Try our grain bin size calculator or printable template.
https://www.iascaled.com/store/GrainBinSizeCalculators
https://iascaled.com/docs/ho-bin/GBM-HO.pdf
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AABX #206025
AN OTTER VALLEY EXCLUSIVE
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
1:87 Cat 6060 Hydraulic Mining Shovel - High Line Series
The Next Generation Cat 6060 Hydraulic Mining Shovel combines everything great about the 6060 with everything customers demand from Caterpillar to deliver a shovel that not only produces, but works harder and lasts longer.
Available in both a backhoe and face shovel version, its rated payload of 67 tons is tailor-made for mines using 250 ton haul trucks, providing an efficient 4-pass solution to meet production capacity in these environments. The 6060 remains the ideal shovel for higher productivity and lower overall owning and operating costs.
Features and Details:
- Detailed cab interior including operator
- Authentic Cat machine yellow paint
- Authentic Cat Modern Hex Trade dress and safety decals
- Realistic metal tracks
- Moveable Boom, Stick and Bucket
- Detailed hydraulic hoses
- Dual hydraulic cylinders on boom and stick
- Rotates 360 degrees on undercarriage
- Realistic grab rails, handles and railings
- Power access stairway
- Emergency egress ladder
- Detailed superstructure access area
High Line Series Packaging:
Collectible, full-color-printed metal box, including machine photos and specifications. Die-cut foam insert protects model within the box. Cardboard outer box provides additional protection.
HO PS4750 Covered Hopper - L&N Family Lines (Original 12-1980) #242142
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
LN Family Lines -Original 12-1980- is an exciting offering for us, championed by Family Lines and CSX modelers alike. Built in 1980, the L&N cars have those distinctive wider jacking tabs associated with much (but not all!) of Pullmans late production. The center sill correctly models the brake linkage -access holes- on one side of the car, just like the real ones. Notice the side posts - they are the proper -closed hole- style at the bottom. This matches the L&N order exactly. Our 100-ton Barber S-2 trucks are beige to match the body paint. This is a big scheme, and we know the Family Lines modelers have been very patient.
HO 11,000 Gallon Tank Car Shell Chemical SHPX
Road Number 1618
FEATURES:
Finely molded handrails
Tank fittings and safety placards
50-ton friction-bearing trucks with AccuMate couplers
Accurate painting and lettering
Platform where appropriate
HO EMD SD70ACe - ESU(R) Sound & DCC - Norfolk Southern #1010
(black, white)
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Thousands in service from 2005 to the present
- Fully assembled
- 21-pin DCC plug
- Easily handles 18 inch radius curves (22 inch or larger recommended)
- Six powered axles per unit
- Molded drill starter points for grab irons - easily added with the EMD Diesel Detail Kit (910-251, sold separately)
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
Equipped with ESU Sound for DCC and DC layouts featuring:
- 4 function outputs with brightness control by CV
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch prime mover sounds
- Compressor
- Dynamic brake
- Multiple realistic LED lighting effects
-High or low headlights per prototype
- Working front ditch lights
- Constant and directional lights
Same powerful drive as WalthersProto(R) locos featuring:
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant and directional LED lights
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
HO 53Ft Gunderson Husky-Stack Well Car - Arkansas & Oklahoma AOK (2pkg) #73530, 73649
Does not include containers
Road Numbers Include:
73530
73649
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
HO 73Ft Center Partition Car - Iowa Northern Railway #26803
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
1mm Static Grass - Summer Grass (30g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- Canadian National
#621305
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Tangent Scale Models PS4750 Covered Hopper- MKT- Original 12-1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
MKT Original 12-1979 in the eye-catching green scheme with the large yellow MKT painted on the flanks of the car. Like our BN models, the Tangent PS4750 is the only model on the market to match MKTs one and only order of PS4750s, from the jacking pads, brake system, roof hatches, etc. Check out the prototypical Ellcon-National Peacock D-1600 hand brake and the Brenco-3 style rotating roller bearing caps!
HO 36Ft RTR 3-Dome Tank Car - ACFX #60
Product Information
Add authentic cars to your steam- or diesel-era layout with these 36Ft 3-Dome Tank Cars from WalthersMainline! Serving a wide range of both producing and consuming industries, these cars were actually three tanks in one, ideal for handling smaller amounts, and a greater variety of product at once. Features of these cars include:
One time run of these roadnumbers, limited quantity available - order now!
Prototypes hauled petroleum, chemicals and similar liquid loads in three compartments
In service from late 1920s to 1960s
Detailed underbody with AB brakes
Fully assembled
Correct 33inch turned-metal RP-25 wheelsets
Proto MAX metal knuckle couplers
HO Steam Engine Bell w/Bracket (Brass Casting) - Air Ringer Type
HO GE C30-7 - DCC & Sound - Norfolk & Western (Black Scheme) #8059
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Sound-equipped units feature ESU Loksound V5 decoders
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
Power Pro Cab06r
Wireless intermediate cab with LED display, encoder speed and internal antenna.
HO F30A 50Ft Flat Car MOW w/Deck Rails - Conrail (CR MOW) #58723
This car does NOT include sleeper or camp vans
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Late Red) #475116
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
Bulk Transfer Conveyor w/Pit 5-3/8 x 9-11/16 x 2-3/8 inches - 13.7 x 24.6 x 6cm
If you run a business that receives bulk materials in open-top hoppers, chances are you have a Bulk Transfer Conveyor. These unloading facilities provide a dumping pit below track level. A conveyor brings materials up to the surface where a movable, rubber-tired conveyor routes it into the appropriate stockpile.
HO GP40-2 Diesel - DCC & Sound - Chessie/B&O/CSX #6084
CSX-B&O FEATURES:
- Offered by popular demand
- Correct horn per prototype
- Side hood mounted bell
- Chessie -mail slot- battery box doors
- Front and rear Chessie style rock plows
CSX FEATURES:
- Offered by popular demand
- Correct horn per prototype
- Side hood mounted bell
- Chessie -mail slot- battery box doors
- Front and rear Chessie style rock plows
- All-new artwork provided by noted CSX railroad experts
GP40-2 LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- McHenry scale knuckle couplers - Kadee compatible
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Fully-assembled and ready-to-run
- Minimum radius: 18 inches
SOUND-EQUPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of -In Service- equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO 89Ft Bethlehem Flush-Deck Flatcar - TTX RTTX #160906
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers
HO Lightweight Coach - Central of New Jersey #279
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Orange) #505486
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
The Power Supply connects to the Static King applicator to ensure it consistently operates at full-strength for optimal performance.
HO AutoFlood III RD Coal Hopper - UP/CMO #504273
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO G2.0 SD60M Tri-Clops - DCC & Sound - SOO #6058
SOO FEATURES:
Large EMD plow w/red edges
Cab door without window
Winterization hatch
Leslie 3-chime horn
Roof mounted strobe (operates in DCC)
In 1989, Soo Line purchased 5 SD60Ms from EMD, numbered 6058-6062. They were all painted in this attractive and bright -Candy Apple- red scheme, and could be seen all over the system. Soo was known to run these as a single unit in hot-shot TOFC trains as in the image below. After Soo Line was folded into the CP Rail System, these units remained in Soo colors for a long while before finally being repainted in CP Rail colors.
ROAD NUMBER SPECIFIC FEATURES:
#6058
As delivered -Candy Apple- scheme
#6060
As delivered -Candy Apple- scheme
#6062
Early patch
Soo features
added front ditch lights
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Warranty service available
Minimum radius: 18inch Recommended radius 22inch
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
Animated roller bearing caps
SOUND-EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) #744293
1935+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - CSX #242000
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Prototypes in service from late 1980s to the present
- Separately molded and applied hopper gates
- Correct 36 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
Exhaust Stack - EMD Non-Turbo Charged GP/SD TYPE - pkg(2)
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
RTR 52Ft Mill Gondola, TFM #60099
MODEL FEATURES:
Fully assembled and ready for your layout
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
33In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
Open top cars, such as gondolas, have been a mainstay on railroads for decades as they are ideal for carrying large, bulky loads such as coil steel or scrap metal loaded by crane.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #809
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Spray Can - Red Brown (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Athearn Genesis - HO ACF 4600 3-Bay Centerflow Hopper - Chicago & Eastern Illinois #718533
Estimated time of arrival: May 2021
Detailed Information
MODEL FEATURES:
Three body styles:
Early- High side ladder & brake wheel, single side stiffener
Mid- Low brake wheel, short side ladders both ends, single side stiffener
Late- As above but with double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble free operation
Genesis 100-ton trucks with 36Inch machined metal wheels and animated spinning roller bearing caps
C&EI FEATURES:
Era: Late 1970s+
C&EI: As-Delivered, Late body with stiffener ribs and low brake wheel.
PROTOTYPE AND BACKGROUND INFO:
The 3-bay CenterFlow covered hopper first entered service in the mid-1960s, built by American Car and Foundry. The cars handle loads such as grain, corn and similar bulk commodities. The Centerflow design relies on the cars rounded body to provide structural strength - eliminating the traditional center sill, and making gravity unloading easier. Our 3-bay car represents the common 4600 cu.ft. capacity version. The railroads looking to replace their aging 40Ft box cars in grain service needed a modern hopper design - one that could operate within the tighter Plate B clearances for light branchline and industrial service. ACFs design won them many contracts from a plethora of railroads. One can find these cars still in revenue service today in grain trains and other similar service.
Specifications
PROTOTYPE MANUFACTURER: American Car & Foundry
TRUCK STYLE: Genesis 100-ton
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1970s+
Minimum Age Recommendation: 14 years
Is Assembly Required: No
Modern Coaling Tower
Authentic American Prototype
Serves 3 Tracks
Coal Delivery Shed
Loaded with Separate Details
Decal Signs Included
HO Procor 20,000 Gallon General Purpose Tank Car - CN - Company Service / Era: 1985+ - #80362
The Rapido Trains HO scale Procor GP20 Tank Car features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Photo-etched metal walkways
Detailed vent stacks, loading hatches, air tanks and braking equipment
Metal knuckle couplers
Early style features 70-ton trucks with 33in wheels and an exposed drain valve
Late style features 100-ton trucks with 36in wheels and a reinforced drain valve housing
HO MLW M420 - DC/DCC Ready - Delaware-Lackawanna #2045
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
5/32 inch Diameter Round Brass Rod - 12inch Long
1 Piece
HO 70 Ton 13 Panel 3-Bay Hopper Car - Pennsylvania (H37B Simplified) #272562
Ready to Run.
Features:
Crisp details and sharp painting and printing,
metal wheels and knuckle couplers
GE C30-7, BNSF #5177, Green and Orange w/Paragon3 Sound/DC/DCC
FEATURES
NEW Paragon3 Sound & Operation System FEATURING ROLLING THUNDERTM with Authentic Sounds and Prototypical Operation in both DC and DCC environments
Locomotive Composition: ABS Body with Die Cast Chassis
Couplers: (2) Operating Kadee or Compatible
Compatible Tracks: Code 70, 83, 100 Rail
Minimum Operating Radius: 18 in or greater
Acrylic Flat Colors - Cockpit Green - 3/4oz (23mL) Bottle
XF-71
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
Red Clear Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
G2 SD70M-2 - DCC Ready - CN/GT/Heritage #8952
Genisis 2.0 Features:
See-through pilot steps, Lit Marker Lights (CN)
LIT numberboards & ground lights
Detailed Information
CN NOTES:
Part of CNs large fleet of SD70M-2s, these units are equipped with operating marker lights for DPU service. As part of the railroads new heritage program, CN 8952 was painted in the GTW scheme, and CN 8898 received the the special placards celebrating CN independence on the sides of its nose.
ROAD NUMBER SPECIFIC FEATURES:
#8898
White cab roof
CN heritage decals on each side
#8921
Standard CN Web Address paint scheme
#8934
Mismatched compartment doors on left side
#8952
Grand Truck Western Heritage Unit
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Etched see-through steps
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - SSTX #2020
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO G2 SD80MAC - DCC & Sound - CSX/YN3 #4590
CSX FEATURES:
Former CR units
Operating forward and reverse red marker lights
Correct horn and antennas per road number
Approved by CSX experts
Just as a batch of SD80MACs were sent to NS after the CR split, CSX acquired a batch as well. After a short period of running around patched, they were all repainted into CSXs -YN3- scheme. Only one, CSX 801 (which was renumbered to 4591), received the -YN2- scheme. It eventually got the YN3 treatment.
ROAD NUMBER SPECIFIC FEATURES:
#801
Fresh YN2 repaint with CR details.
#4591
YN2 paint with patched numbers
K5 horn
white painted roof with GPS dome.
#4590
YN3 repaint
-Spirit of Benning-
Leslie 3-chime horn
white painted roof with GPS dome.
#4600
YN3 repaint
K-5 horn
white painted roof with GPS dome.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
CV chart included in the box
HO EMD GP40 - DCC & Sound - Canadian National (Large Noodle) #4017
1967+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
N Budd RDC-1 (Ph 1) - DC/DCC/Sound - ATSF (Delivery) DC-191 + DC-192 (2 Pack)
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height
HO Scale G2 AC4400CW - DCC Ready - Chicago & North Western #8816
CNW FEATURES:
Holden K5H Horn
Early body features
Desk style control stand
Fuel tank without notch
Unevenly spaced rear grab irons
Front ditch lights
Fuel tank bolted to the frame
Low number boards
Extended range dynamic brakes
Lipped exhaust tub
As delivered Antenna package
GE Hi-Adhesion trucks
Inside struts on all truck sides
Central air intake in forward position
An earlier purchaser of the AC4400CW, the units purchased by Chicago & Northwestern were again dressed in the attractive -Lighting Stripe- paint scheme, but now with the addition of an Operation Lifesaver decoration on the long hood. The AC traction paired well with the long heavy coal trains CNW was pulling out of the Powder River Basin. Many of these units lasted well after the UP acquisition of CNW in their original paint or with minor patching. These early versions rode on the first iteration of the Hi-Adhesion trucks with struts on all four corners of each trucks that were both shorter and inboard of the brake cylinders compared to later variations.
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO GP9RM - DCC & Sound - Canadian National (Large Noodle) #7009
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO EMD SW9 - DCC & Sound - Canadian National (CN Black Scheme) #7007
Photo says: Model will include various detail parts to modernize appearance
Preliminary artwork and drawings. Subject to changes or revisions before production
Canadian National:
Delivered in 1952 / GMDD
CN style spark arrestors (in polybag)
Large barrel style headlight
Frame mounted side handrails
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO Central Beverage Distributors w/Office Annex - Kit
The Walthers Cornerstone HO Scale Central Beverage Distributors with Office Annex kit is based on contemporary rail-served warehouses. The warehouse features corrugated construction on a block foundation and the office annex is a brick structure with a canopied main entrance. The warehouse has molded cut lines inside for easy customizing to fit your space. Use this kit in your industrial park as a destination for boxcars or as part of a larger complex. Central Beverage Distributors is one of many Cornerstone HO Scale industry kits.
Great addition to modern industrial parks
Perfect kit for modeling all types of light industry or warehouse operations
Contemporary steel and brick structures
Detailed front office
Large warehouse with rail and truck docks
Molded cut lines for easy warehouse customizing
Weather bellows for dock doors
Rooftop cooling units, vents and air conditioners
Colorful truck decals (trucks sold separately)
Printed Office Interior
Printed billboard signs for three different distributors
Molded in five colors and clear plastic
Easy-to-build plastic kit
As shown Central Beverage Distributors measures: 15-15/16 x 8 x 4in 40.4 x 20.3 x 10.1cm
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286401
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
HO EMD SW9 - DCC & Sound - Canadian National (CN Black Scheme) #7009
Photo says: Model will include various detail parts to modernize appearance
Preliminary artwork and drawings. Subject to changes or revisions before production
Canadian National:
Delivered in 1952 / GMDD
CN style spark arrestors (in polybag)
Large barrel style headlight
Frame mounted side handrails
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
Spray Can - Metallic Orange (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
1941-46 32Ft Fruehauf 32Ft Fruehauf Bekins Moving Van Resin Cast Kit
HO Intermountain 4-Panel Coalporter, Canadian National
CNA Website scheme
Features:
Sharp Painting and Lettering
Prototype Accurate Paint Schemes
Multiple Road Numbers
InterMountain 100 Ton Trucks with 36in Metal Wheelsets
Metal Knuckle Couplers
Rapido Bits 102064 N Scale Passenger Car Trucks
Rapido Trains 6-Wheel Passenger Car Trucks feature fully detailed sideframes with separately applied details and a serial number molded on each truck. Trucks feature slippery Celcon plastic bearings for excellent rolling quality, and insulated metal RP-25 wheelsets with one side insulation.
HO 68Ft Railgon Gondola - Railgon GNTX #290002
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO EMD GP40R - DCC & Sound - Illinois Central #3121
Mid 90s
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO Union X-3 Tankcar - Seaboard Air Line #073157
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
Red Cab & White Box
Note only one unit
HO Delivery G43A 2-1968 Gondola - Penn Central #576104
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inchh Wheels
PC -Delivery G43A 2-1968- in the original Penn Central green paint scheme, and a PC version we have not yet offered! These gorgeous models have 2 placards in place for the PC reporting marks, road numbers, and ACI label on the left side of the car. On the right side is an additional placard that includes a PC logo and Penn Central lettering. These placards are utilized on this class of PC car since these cars have side corrugations on each panel, where they knew that putting paint on the corrugations would not last very long! These cars have corrugated ends, and the Tangent replica includes oxide red car interiors ? on the interior walls and ends ? like the prototype. We even duplicated the slight green overspray on the inside end corners! The 100-Ton trucks feature accurate rotating -Timken- caps.
HO SD38 - DCC/Sound - CanDo Rail Services #5202
CCGX FEATURES:
CanDo Rail Services is a contracting company based out of Brandon, Manitoba, Canada. They preform track maintenance for large industries, operates as a shortline, and contracts switching services in Ontario, Manitoba, and Alberta Canada.
ROAD NUMBER SPECIFIC FEATURES:
#5201
- Ex: DMIR. Short fuel tank
- triple clasp brakes
- M3 horn
- UP style plows
- all-weather windows
- ditch lights on both ends
- Classified as a SD38AC
#5202
- Ex-BLE. Medium fuel tank
- high-mount truck brakes
- M3 horn
- UP style plows
- all-weather window
- ditch lights on both ends
- Classified as a SD38AC
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - CSX #242034
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Prototypes in service from late 1980s to the present
- Separately molded and applied hopper gates
- Correct 36 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
HO PS4750 Covered Hopper - L&N Family Lines (Original 12-1980) #242159
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
LN Family Lines -Original 12-1980- is an exciting offering for us, championed by Family Lines and CSX modelers alike. Built in 1980, the L&N cars have those distinctive wider jacking tabs associated with much (but not all!) of Pullmans late production. The center sill correctly models the brake linkage -access holes- on one side of the car, just like the real ones. Notice the side posts - they are the proper -closed hole- style at the bottom. This matches the L&N order exactly. Our 100-ton Barber S-2 trucks are beige to match the body paint. This is a big scheme, and we know the Family Lines modelers have been very patient.
TrainSpotter with Right-Angle Sensor
The TrainSpotter makes detection of locomotives or rolling stock easy and reliable. Just place the sensor where its invisible light beam will reflect off the object of interest and you are done - no time-consuming or frustrating adjustments! Based on modern silicon technology, this reflective infrared proximity sensor is tolerant of ambient (background) lighting conditions, be it completely dark or under full lights, with no false triggering.
This version features a right angle mounted sensor, sensing objects next to the PCB. This allows the sensor to be mounted next to the track and detect things beside it, avoiding the need to drill up through the ties.
FEATURES:
- Small size (0.25 x 2.25 inches)
- Right-angle sensor (instead of end-mounted) for simple, next-to-track installation
- No adjustment needed!
- Release time of zero or 5 seconds (solder jumper)
- Two opposite polarity, open-collector outputs (40V / 250mA capable)
- Tolerant of ambient (background) lighting conditions - no false triggering
- 24 inch pre-stripped wire leads attached to the sensor
- Powered from 5V to 24VDC
Typical Applications:
- Activate grade crossing signals
- Trigger sounds
- Build an automatic interchange
- Indicate end-of-track in hidden staging yards
- Detect block occupancy for signal systems
- C/MRI track occupancy inputs
Installation:
The detector is designed to be installed up through the benchwork in a 3/8 inch (10 mm) hole. Because the sensor itself is so small, only a single hole is required and no complicated drilling jigs are needed. The sensor can be secured in the hole using a variety of methods such as hot glue or by using a bracket.
Electrical Connections:
The CKT-IRSENSE needs 5 to 24 volts of clean direct current (DC) power to operate. Two opposite polarity outputs are provided, both of which are open drain (otherwise known as open collector) and act like a switch to the ground or negative lead.
Logic level outputs can be generated by connecting a resistor to pull up the output to the positive supply. Other devices, such as LEDs or relays can also be driven directly and the outputs from multiple sensors can be connected in parallel to combine them into one signal.
Specifications:
2.25(L) x 0.25(W) x 0.25(H) inches
By default, the release time is zero, but can be set to 5 seconds by shorting two pads (JP1) on the back of board.
The sensing distance varies with the reflectivity of the object being sensed, but is typically 1.5 inches.
HO 1937 AAR 40Ft Boxcar - CP5/5 Ends - Canadian Pacific (Spans the World) #227213
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
N - 1/160 New Look Bus - Generic Red
Unlettered Red w/ Silversides
Detail Variations:
Illuminated headlights and brake lights
Rubber, Water and Steel Bumpers available (polybag)
Rear A/C unit included (polybag)
All of our N scale New Look Bus models include:
The exact New Look shape – including the unique tubular profile – traced from a 3D-scan of a real TTC New Look Bus
Full underbody detail including fuel tank, cabling, engine detail, etc.
Early (5303) rear engine door style
Left-side emergency exit door
Full interior including drivers controls, passenger seats and grooved flooring.
Super-detailed wheels with REAL rubber tires
Separately applied mirrors
Three front bumper styles − steel, water and rubber (installed as appropriate)
Rear Air Conditioner Unit (installed as appropriate)
WORKING headlights and taillights, powered by a 9-12V DC power supply (not included)
HO GE C36-7 - DC/Silent - Burlington Northern #5054 (Whiteface Scheme w/stripe, Cascade Green, Black)
The Rapido Trains HO Scale C36-7 is based on General Electric's higher-horsepower six-axle Dash-7 offering, with a 16-cylinder 3,600 horsepower or 3,750 hp rating (compared to the C30-7's 3,000 hp.) Built between July 1979 and February 1989, over 599 total units were produced. Of those, 129 were domestic orders for Conrail, Missouri Pacific, Norfolk & Western, and Norfolk Southern. Another 40 were made for Ferrocarril del Pacifico and National de Mexico. Lastly, 422 were made for China with many significant export differences, and the final units produced were 8 for Comilog in Gabon. Despite smaller production numbers, the C36-7 was ordered at key moments that resulted in it representing the evolution of GE s Dash-7 line more than the popular C30-7s. When GE launched "1977 Series Locomotives" (Dash-7s) in, they cataloged a C30-7, C33-7, and C36-7. Railroads immediately ordered C30-7's for booming coal service. The C33-7 was never ordered. The C36-7 was ignored until 1979, when National de Mexico and Ferrocarril del Pacifico placed orders. These export C36-7s for Mexico were essentially identical externally to C30-7s, which were being built by the hundreds at the time. Ferrocarril del Pacifico's units were repainted into striking two-tone blue FNM paint and worked both freight and passenger service. Of the 40 C36-7s built for Mexico, only one is still in service in 2024 - Ferromex 9336. Incredibly, despite being the last operating C36-7 (among few remaining operating C30-7's) 9336 was repainted in Ferromex's classy "Diet Coke" scheme in 2023. The Rapido model features railroad and era-specific details, etched-metal grilles and details, roadname-appropriate lighting packages and Rapido semi-scale knuckle couplers on both ends. The smooth-running drive features a five-pole motor with dual flywheels, backed up with the MoPower capacitor system for uninterrupted operation. This standard DC model is DCC ready with a 21-pin interface for easy conversion. The GE C36-7 is part of the line of Rapido Trains HO Scale locomotives.
The Rapido HO Scale C36-7 Locomotive features:
Headlights and rear lights
Class lights, marker lights, or ditch lights, where applicable
Step lights
Lit numberboards
Full traction motor casing details
Metal brake chain on engineers side
Detailed underbody piping and conduit
Separate grab irons
Rapidos innovative dead straight metal side handrails with plastic stanchions
Detailed cab interior
Lighted control stand
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Sound-equipped units feature ESU Loksound V5 decoders
5/32 inch OD Round Brass Tube - 0.029inch Thick x 12inch Long
Round Brass Tube (1 pc)
Outside Diameter: 5/32 inch
HO - Airhorn (Unpainted Brass Casting) - Nathan P3 (2 Bells Forward, 1 Bell Back)
GMD SD40-2f - DCC and Sound - CP Rail (Round Porthole, White Stripe) #9002
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
.075in Opaque White Polystyrene Board and Batten Siding (1 Sheet)
.040in (1.0mm) THICK X .075in (1.8mm) GROOVE SPACING (BOARD), .015in (.38mm) RIB WIDTH (BATTEN)
6in x 12in SHEET
HO Kenworth T680 Day Cab Tractor w/Pneumatic Bulk Trailer - Steves Transport
(black, red, chrome)
SubTerrain System - Foam Risers (1/2in)
4/pkg - 1/2 x 2-1/2 x 24 inches (1.27 cm x 6.35 cm x 60.9 cm)
Risers are generally used with incline/decline starters to create varying grades on your layout. Risers are easily flexed to form curves and work on plywood or foam bases. To install, pin in place with foam nails and attach with foam tack glue or low temp foam glue gun and glue sticks.
HO Tavern & Liquor Store Signs
Blair Line HO Scale Business and Storefront signs are printed in appropriate colors on thin plastic for easy assembly or placement with plastic cement or CA glue. Colorful signs are based on real signs and many include two identical signs for back-to-back, two-sided mounting. Steam and diesel-era signs make great roadside, street-side, trackside and structure details.
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504931
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
HO 53ft Singamas Corrugated-Side Container - Canadian National
(gray, red; CN Intermodal Logo)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended.
Terminal Block Plug 3.81MM 2 POS
Fits Power Cab face plate at the back.
Fits PCP Power Cab Connection Panel.
Fits Power Pro DCC Command Station in the front. (Program Track)
Colour Green; To find it next time it is misplaced
two pin NCE connect tor dcc controller
This piece is an electrical connector and integral part of the NCE DCC controller system.
Code 83 Crossing - Nickel Silver w/Brown Ties - 60 Degrees
DCC Friendly
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Weyerhaeuser #1109
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Dalman 2-Level (Talgo Style w/Knuckle Coupler)
with Medium Extension Magne-Matic couplers - Assembled
For Con-Cor and Bachmann cars, rolling stock
This style, considered -modern era- came on the scene in the late -60s.
Canadian Pacific Facilities In Color: Volume 3
By: John Riddell
March 1, 2017 RELEASE
CP trains pass stations, towers, and yards on this vast system - mostly back in the maroon-and-grey years!
Acrylic Glossy Colors - Clear Red - 3/4oz (23mL) Bottle
X-27
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23081
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale 53ft Stoughton Containers - Swift, Set #1 (3pk)
MODEL FEATURES:
- Fully assembled
- Magnetically stackable
- Each container individually numbered
- Razor sharp printing and painting
HO EMD SD10 - DCC & Sound - SOO Line #534
SOO Line --Conditional Announcement--
- Ex-MILW units / same features
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Alco RS-11 Conrail 7630 DCC & Sound
ESU LokSound Installed
The Rapido HO Scale RS-11 model features:
•Correct hood and roof profiles 3D scanned from the prototype
•Operating number boards, headlights and green and white class lights and cab control stand lighting
•Rapido innovative dead straight metal side handrails with plastic stanchions
•Roadname-specific details including steps, lights, equipment boxes, handrails, fuel tanks, air intake louvers and more!
•Full underbody piping, conduits and steam lines, where appropriate
•Correct roadname-specific corner steps
•Separate grab irons and wire handrails installed at the factory
•Heavy, die-cast chassis and full, multi-colour/color interior
•Rapido proven 5-pole skew-wound motor with dual flywheels and silky-smooth drive
•DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound)
•Accurate sounds recorded from a real Alco 251B prime mover
•Factory-installed Macdonald-Cartier couplers mounted at the correct height
HO Mid-Century Modern Home - Kit
Product Information
Add a stylish and modern home to your Ho suburbs with the Mid-Century Modern Home kit from Cornerstone! Based on prototypes built from the late 1940s to 1960s and still enjoyed by contemporary homeowners, authentic details include:
-Authentic brick and concrete block construction w/large windows
-Attached carport w/rear toolshed
-Roof-mounted skylight
-Modern air conditioner, kettle-style grill, nonworking globe walkway lights, mailbox, gas and electric meters and more all included!
-Printed interior sheet included
-Molded in gray, white, tan and clear plastic
HO RJ Frost Ice & Storage - Kit
Product Information
Next time youre in the grocery store, look at the incredible variety of fresh and frozen foods available. Most of them were grown and processed in another area, then shipped to facilities like the prototypes of Walthers Cornerstone RJ Frost Ice and Storage. Along they way, they spent some of their rail and truck journey in a cold storage plant. These buildings are commonly found in agricultural areas where foods are readied for shipment, and in large cities where the food is stored for pickup by local customers. This kit captures the look and feel of a large cold storage warehouse in a size that fits most layouts. The kit includes concrete walls, truck and railcar docks with canopies and a large rooftop cooling tower. Itll look great along your railroads industrial trackage or in small towns where multiple packing houses process perishables for shipment. As shown RJ Frost Ice and Storage measures: 11 x 11inch (28 x 28cm.)
RJ Frost Ice & Storage is just one of a wide variety of Cornerstone HO Scale industrial buildings.
Realistic concrete construction
Truck and railcar loading docks with canopies
Fits steam or diesel era
Great origin or destination for reefers and insulated boxcars
Realistic decals
Easy-to-build plastic kit
RTR 52Ft Mill Gondola, TFM #60735
MODEL FEATURES:
Fully assembled and ready for your layout
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
33In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
Open top cars, such as gondolas, have been a mainstay on railroads for decades as they are ideal for carrying large, bulky loads such as coil steel or scrap metal loaded by crane.
1/8 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 1/8 inch