HO UAC TurboTrain Completion Pack: VIA Set #3
Car Numbers:202, 225, 250, + IC-34, 260
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model.
HO Scale SD30C-ECO - DC/DCC Ready - Canadian Pacific #5012
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
Light Block Kit - Just Plug Lighting System
Keep light inside a structure, where it belongs. Seal all light leaks easily by pressing Ribbon Putty into interior corners and joints. Affix it along the bottom edges of structures to secure building to layout surface and block light from bleeding along foundations. Apply Masking Paint to keep light from glowing through walls and shining through windows. Putty will cover 96 linear inches (243 cm) and Paint will cover 1,200 sq. in (77.4 sq dm).
HO Vintage Firearms & Sporting Signs - 1940-60s (40)
Vintage Firearms and Sporting Signs printed on 2 paper sheets.
Walthers Layout Control System - Single Color LED Fascia Indicator (Yellow)
Works for HO, N, Z, S, and O Scales
This 21st century approach to turnout control uses servo-based components, and features color-coded plug-and-play wiring to eliminate cutting and soldering. The heart of the system is the fully assembled Switch Machine that has a low current draw and comes with great features including an integrated DCC accessory decoder, as well as user-selectable options for quick and easy customizing.
N Scale NSC 64 Ft 6000 Cubic Gondola HS - TLPX #2241
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO 85Ft Budd Observation - Ready To Run - Amtrak Phase I
Product Information
Add luxury lounge space on your classic streamliner quickly and easily with this WalthersMainline HO Scale 85Ft Budd Observation! A common car on many trains, the trademark -boat tail- end of the car offered riders a receding view of the rails through wrap-around windows as they relaxed with their favorite beverages or snacks. Nicely detailed, affordably priced and built tough for years of dependable service, this car is based on fluted-side cars used my many North American railroads. 85Ft Budd observation are perfect for use with other WalthersMainline HO Scale streamlined passenger cars.
Model passenger service in minutes at WalthersMainline prices!
Based on streamlined cars used by many roads
Eight authentic car types
Operates on 18inch or larger radius curves
Correct prototype 85Ft length
Tinted window glazing
Fully assembled, ready for fun on your railroad
Rugged construction for years of service
Detailed body
Full interior
Correct 36inch turned metal RP-25 wheelsets
Proto MAX(TM) metal knuckle couplers
LED interior lights available separately
Molded drill starter points for add-on wire grab irons (sold separately)
Officially licensed by Amtrak Amtrak is a registered service mark of the National Railroad Passenger Corporation
HO Ready Made Realistic Trees Value Pack - Deciduous Mixed Green 3/4 - 2inch 1.8-5cm pkg(38)
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors.
HO RTR 33,900 Gallon LPG Tank/ Flat - UTLX (3 pkg) #2
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Three different body phases: early, flat panel, and late
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports and tank saddles
Photo etched metal walkways and end platforms
Wire safety rails and end handrails
Printed placards
Full underframe detail featuring body mounted brakes or truck mounted brakes as per prototype
Body-mounted, McHenry scale double-shelf knuckle couplers
100 ton trucks with animated rotating bearing caps
Machined metal wheels with RP25 contours
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Weighted for optimum performance
Minimum radius: 18inch — Recommended radius: 22inch
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - DEAX #11344
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO 40ft ACF Modernized Welded Boxcar - Lehigh Valley #66186
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Alco PA - ESU Sound & DCC -- New York Central #4202 (Lightning Stripe, 2-Tone Gray)
factory-Installed ESU sound for DCC & DC layouts featuring:
4 function outputs with brightness control by CV
Fully DCC compatible
14, 28, 128 speed steps
Dual mode DC and DCC
5 air horns changeable by CVs:
Wabco Single Chime - Default
Leslie A-200
Leslie S3L
Leslie S5
Nathan M5
2 Alco bells changeable by CVs
Full 8-notch prime mover sounds
Compressor
Dynamic brake
21-Pin DCC plug
Multiple realistic lighting effects
Same powerful drive as WalthersProto(R) locos featuring:
Five-pole skew-wound motor
14:1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Dual machined brass flywheels
Heavy die-cast metal chassis
Constant LED lighting
Factory-installed handrails
Molded drill starter points for grab irons - easily added with Alco PA Diesel Detail Kit ( sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Budd Baggage-Dorm - AT&SF #3405
Each Baggage-Dorm includes:
Realistic stainless steel finish
Track-powered interior lighting compatible with DC and DCC layouts
Full underbody detail including separate air, steam and electrical lines
Separate metal grab irons, stirrups and end gates
Accurate D22 brake equipment and piping
Super-detailed 41-NDO-11 trucks with end frames
Full, multi-color interior detail
3D CP beaver shields on CPR models - not just a printed picture!
Sprung diaphragms
Metal Macdonald-Cartier knuckle couplers
HO Greenville 86ft Double Plug Door Box Car - Missouri Pacific #271647
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Release Date: August 2021
Missouri Pacific (MP) -Original 1968- represents another frequently-requested paint scheme! MP ordered five different lots of Greenville auto parts box cars, and this lot was the largest at 157 units. The prototypes were delivered with MP -buzzsaw- logos on the right side of the car, and economical -Cushion Car- lettering on the left. Of course, as any self-respecting MP modeler will tell you, there is so much more to MP lettering than slapping a buzzsaw on the car. Tangents industry-leading artwork has duplicated the distinctive and intricate MP lettering style from the reporting marks down to the smallest stencils. The cars offered in this run were assigned to Fords Chicago Stamping Pool, resulting in an accurate Chicago Heights, Illinois return route stencil. Center-of-Car Cushioning draft gear detail variation with yellow end handles? Check. Distinctive Klasing 1150 hand brake? Check. Accurate Apex crossover platforms? Check. 100-Ton -Low Profile- Barber S-2-C Roller Bearing Trucks with 36inch wheels and rotating Timken caps? Check, check and check! These cars lasted in original paint into the late 1980s and went everywhere. Our models are available with your choice of six road numbers, with three cars showing 8-68 build dates and three cars showing 9-68 build dates. Collect all six while you can!
HO Summer Grass Tufts - 1/4 Inch Tall (42pk)
FEATURES:
- Realistic Grass Tufts
- Great for adding long grass to small areas
- Pre-shaped and ready to use
- Ideal for filling pavement cracks, tree bases, along fences and more
- Includes 42 individual tufts in one color
- Flexible transparent bases
40Ft Corrugated Container NYK Logistics 2pk
NYKU #841086(5), NYKU #844710(2)
Modern Dual-Sided Billboard - Assembled
Prototype History:
Completely assembled and ready to place on your layout, our Modern Yard Office is perfect for rail yards, construction sites, city dumps and more!
The prototype for this product is located at the Union Pacific (ex Southern Pacific) -J- Yard in Los Angeles. With such generic features, this style of Yard Office (or generic prefabricated metal building) is perfect for literally any railroad in the country.
Features:
- Completely Assembled!
- Injection-Molded Plastic
- Light Brown/Dark Brown
- Installed Window Glass
- Perfect for 1970s+
- Ultra-Common Design
- Extremely Accurate Detail
Model Footprint:
Length 6.75inch X Width 2.77inch (not including roof overhand)
HO 4650 Centerflow Hopper - Wisconsin Central (CN) #87017
Features:
Etched metal roof walks
Detailed brake gear
Blackened metal wheels
Accurate painting and printing
100-ton roller-bearing trucks and body mounted AccuMate couplers with screw-attached coupler pockets.
AccuMate couplers are made under license from AccuRail, Inc.
HO 68Ft Flatcar - TTX (Forward Thinking) #80627
Features:
Side stake pockets
Simulated tie-loops
Fishbelly center-sill
Prototypical pull-plates and lift rings
HO Scale 89ft Channel Side Flatcar - Trailer-Train/KTTX #154838
(yellow, black; Twin 45ft)
Built especially for the bigger trailers entering service in the 1960s, this Walthers Mainline model of the 89ft channel side flatcar is a must for period intermodal modeling in HO scale. Based on the F89F flatcars owned by Trailer Train and many railroads, over the years these cars carried 28, 40, 45, 48, and 53ft trailers.
FEATURES INCLUDE:
- One time run of these road-numbers, limited quantity available!
- Heavy die-cast metal underframe for great performance empty or loaded
- Used in piggyback and other service 1963 to the present
- Prototypical C-shaped steel channel side sills
- Detailed brake gear
- Swinging coupler pocket for 18 inch radius curves
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Tsunami2 Digital Sound Decoder - 21-Pin NEM form factor - GE Diesel Locomotives
Dimensions: 30.5 x 15.5 x 6.5mm
Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output)
Function Outputs: 8
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V, 22V
Sound Channels: 16
The NEW TSU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more!
The TSU-21PNEM8 can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches.
HO Budd Slumbercoach - Amtrak (Phase 3) #2092 Loch Arkaig
All new from the ground up, the Rapido Slumbercoach features:
Designed from original blueprints
Full Rapido level of underbody detail including separate pipes and conduits
Full multi-color interior detail including roomette doors
Track-powered interior lighting (operable on both DC and DCC)
Accurate GSC 41-NDO-11 trucks with disc brake detail
Etched-metal end gates
Sprung diaphragms
Rapidos renowned stainless-steel finish
HO Scale GP38 - DCC & Sound - Conrail #7853
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
O (1:48) Custom Right Turn Staircase (1pc)
Use in interior applications where a closed casing or spiral staircase is desired. Combine with other staircases to achieve any configuration. Precision Injection Molded in Styrene Plastic.
SCALE
O
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
9/64In
HEIGHT IN MM
3.6mm
WIDTH IN INCHES
57/64In
WIDTH IN MM
22.6mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
1
LENGTH IN MM
25mm
N Scale Flexi Flo Hopper (Late) - MDTX Repaint #897868
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
#1649 Roundhead Stainless Steel Screws 0-80 x 3/8inch - 12pcs
HO Scale 70s GMC 9500 (Short Hood) Kit
This 1970s Era GMC workhorse is ready for your hauling needs. Precision cast pewter wheels, tires and details combined with a resin cab are designed for easy assembly and painting. Clear parts enhance the finished model. Windshield panels are laser cut and the kit includes waterslide decals. Put this short hood 9500 muscle to work delivering commerce on your pike. Detailed instructions can be viewed on the Showcaseminiatures.net website
HO 73Ft Center Partition Car - Canadian Pacific (SOO) #600373
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
HO 4-Bay Cylindrical Grain Hopper - CN Demonstrator #370708
Note: Car is painted only on one side with rainbow colors like the prototype. Other side is gray.
FEATURES:
- blackened metal wheels
- body mounted couplers
- non-magnetic axles
HO Scale Alloy Wheel Set
Truck not included
Pewter cast 22.5inch wheel set of Alloy type wheels
HO GP9 - DCC & Sound - Chesapeake & Ohio #6168
ETA: May 2023
Detailed Information
C&O FEATURES:
Short hood mounted bell
Forward 5-chime horn
Dynamic brakes
Tall exhaust covers
Expert approved art
Between 1955 and 1957 C&O bought 363 GP9s. These units were the backbone of the fleet, used on both road trains as well as local service. In the mid 60s C&O adopted a new simplified paint scheme with the large C&O initials on the long hood. Although the purchase of newer high horsepower units displaced many GP9s to secondary service, most of the fleet soldiered on into the mid 80s. Many units were retired in this version of C&O dress. These road numbers lasted into the mid 1980s which allow the widest range of modelers to benefit from this release.
ROAD NUMBER SPECIFIC FEATURES:
#682
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#683
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#688
Dynamic brakes
bell mounted on long hood
#690
Dynamic brakes
bell mounted on long hood
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
N Scale Urban Steel Overpass - Kit
With Angled Wing Walls: 7-1/4 x 5-1/2 x 1-13/16 inches (18. 5 x 14 x 4.5cm)
With Straight Wing Walls: 5-15/16 x 6-1/2 x 1-13/16 inches (15 x 16.3 x 4.5cm)
Combine roads and rails easily in N Scale scenes with the Cornerstone Urban Steel Overpass kit. This highly detailed structure is typical of common designs in use from the 1900s on as increasing auto traffic made replacement of grade crossings a better option, and many are still in use today. A realistic addition to commercial, industrial or residential areas!
FEATURES:
- Builds double-track railroad ballasted-deck bridge with two-lane roadway below
- Scale 15ft 6 inch (4.7m) overhead clearance between roadway and bridge deck side girders
- Highly detailed girders, beams and columns with scale rivets molded in medium gray
- Separate wing walls can be installed to fit straight or angled installations
HO RTR 60Ft Flatcar - Santa Fe ATSF #95314
MODEL FEATURES:
Separately applied end details and brake wheel
33inch machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Decorated models fully-assembled and ready to run out of the box
Minimum radius: 18inch
Autumn Harvest
Perfect for farm field scenes, kit includes injection-molded interlocking strips molded in an appropriate green or harvest brown color. Simply connect the strips, place on your layout and cover the strip bases with earth ground cover. Corn stalks represent typical spacing and height, and strips are easily cut to fit the field in odd spaces.
Acrylic Flat Colors - Light Grey- 3/4oz (23mL) Bottle
XF-66
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
Rock Molds - Rock Face
Highly detailed, flexible and durable rock molds can be used to cast small boulders, rock outcroppings, top rocks for fields and creeks, or make entire rock faces by combining castings produced with these molds.
Tangent Scale Models PS4750 Covered Hopper- MKT- Original 12-1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
MKT Original 12-1979 in the eye-catching green scheme with the large yellow MKT painted on the flanks of the car. Like our BN models, the Tangent PS4750 is the only model on the market to match MKTs one and only order of PS4750s, from the jacking pads, brake system, roof hatches, etc. Check out the prototypical Ellcon-National Peacock D-1600 hand brake and the Brenco-3 style rotating roller bearing caps!
HO RTR ACF 4650 3-Bay Hopper - Norfolk Southern #251086
Date: 8-92
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
5/16 inch OD Round Stainless Steel Tube - 22 Gauge x 12inch Long
Round Stainless Steel Tube (1 pc)
Outside Diameter: 5/16 inch
HO 50ft Covered Gondola - RI #3826
MODEL FEATURES:
- 70-ton Roller Bearing trucks
- Removable cover
- Separately-applied brake wheel
- Weighted for optimum performance
- 33 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Body-mounted McHenry operating scale knuckle couplers
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inch
PROTOTYPE AND BACKGROUND INFO:
Gondolas are low-sided railroad cars that are used for hauling bulky loads that don not need protection from the weather. The Roundhouse 50ft gondola is representative of larger cars that began appearing on the rails in the early 1950s, and many survive today working for modern roads and contractors.
HO F30A 50Ft Flat Car w/Sleeper Van - Conrail (CR MOW) #62064
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
Rapidos F30 Camp Cars Feature
All-new camp trailer loads in four styles
End railings and platforms
Photetched details
Multiple car numbers per scheme
HO MLW M420 A/B Set - DC/DCC Ready - British Columbia (Lightning Stripe) #642, 686
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO 53Ft Gunderson Husky-Stack Well Car & Containers - Arkansas & Oklahoma AOK #73545
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Pennsylvania Rack, Trailer Train Flatcar (TTBX) #930028
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO 4650 Centerflow Hopper - Farmland (CO-OP) #3433
Features:
Etched metal roof walks
Detailed brake gear
Blackened metal wheels
Accurate painting and printing
100-ton roller-bearing trucks and body mounted AccuMate couplers with screw-attached coupler pockets.
AccuMate couplers are made under license from AccuRail, Inc.
85ft General American G85 Flatcar - Trailer Train - Santa Fe #89809
Product Information:
Limited edition - one time run of these road numbers
Prototypes handled trailers and containers from 1961 to mid-1980s - used for general service loading into the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in up or down position or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
33In turned metal wheelsets
Proto MAX metal knuckle couplers
Add more realism in minutes with SceneMaster trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24In
HO & N scale Premium Foam Train Service Tray - Magnetic Storage Recess
HO Big Grain Storage Bin - Kit
DIMENSIONS:
Diameter: 5-1/2 inches (13.9cm)
Height: 6-1/2 inches (16.5cm) (height is variable)
The Walthers Cornerstone HO Scale Big Grain Storage Bin is based on structures found at elevators, feed mills, and on farms across the continent. Featuring realistic corrugated-metal construction complete with panel lines, grain bins can be used alone or with all kinds of Walthers Cornerstone grain handling structures. Typically, grain bins are connected to other structures with the Grain Conveyor (933-3124, sold separately). All grain conveyor parts are molded in an appropriate base color and complete instructions are provided.
N Scale Automobile Junk, Scrap Yard Pile - 4-1/4 x 3-1/4 Inches
Pre-painted cast-resin junk piles are ideal for adding realism to your scenes and cars.
N Scale Scenic Accents Details - Park Benches (6/pkg)
Woodland Scenics N Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and hand painted for extra realism. The People Sitting figure set includes six assorted adult figures in standing and walking poses.
Walthers Cornerstone HO Scale Brick Sheets come molded in several appropriate colors, and are great for kitbashing, filling in windows and doors and other customizing projects.
Each brick sheet measures 4 x 9-3/4in 10.1 x 24.7cm. These Brick Sheets are part of the line of Walthers HO Scale parts.
Includes four sheets
Realistic US-style brick pattern
Use for kitbashing and customizing
60Ft PS-1 Boxcar - Grand Trunk Western - BCR #383493
Beginning in the 1960s, automakers approached rail carriers with the desire for larger freight cars to transport auto parts from suppliers to manufacturing centers. In response, the 60Ft auto parts boxcar was introduced. Carrying a wide variety of auto components including engine blocks, transmissions, brake drums, and others, these cars were a fixture throughout North America for the next four decades and can still be found in service today. Often times, entire trains of auto parts and related cars could be seen near major production facilities as automakers switched to just-in-time delivery methods, requiring prompt deliveries from the railroads providing service. It was common to see trains consisting of 50Ft, 60Ft, and 86Ft boxcars, specially modified flat cars to carry lightweight chassis, and autoracks all destined for one auto or truck manufacturing facility. As the auto industry supply chains evolved and manufacturing facilities were consolidated, many of the 60Ft boxcars were used in other markets and could be found hauling a variety of goods including appliances, paper goods, cardboard, and similar items.
HO 50ft FMC Combo Door Boxcar - Missouri Pacific #367263
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Weighted for optimum performance
- Minimum radius: 18 inches
- Body-mounted, McHenry operating scale knuckle couplers
- Fully assembled and ready for your layout
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO 5820 Covered Hopper - DCLX (Dow Chemical) #7194
Era: 1988+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
12 x 19 x 4 inches
The new Cornerstone Series Lakeville Shipping makes it easy to add a bustling modern warehousing and manufacturing park to your layout. It features a block foundation, corrugated-metal siding and truck and freight car doors complete with dock seals. One wall section includes windows to simulate a small office. Its ideal for any business park and in combination with the Lauston Shipping and Buds Trucking Background Building kits (both sold separately), makes a great centerpiece for a deep industrial scene.
Micro Metal Foil Adhesive - 1 oz.
Fact is that nothing looks like real metal except real metal. And Micro Foil Adhesive is a very easy and inexpensive way to apply real metal in the form of metal foil to your models. The most common foil is ordinary household foil.
HO RTR 48Ft Husky Stack Wellcar - GBRX #2510
Detailed Information
MODEL FEATURES - 48Ft HUSKY STACK WELL CAR:
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body mounted McHenry operating scale knuckle couplers
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
48Ft well cabable of carrying 20Ft - 48Ft containers on the bottom and up to 53Ft containers on top
HO Surfliner Cab w/Lights - AMTK/Point San Luis #6905
AMTRAK SURFLINER PASSENGER CAR FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurate painting and printing featuring licensed Amtrak paint colors and artwork
- Each car individually named and numbered
- Tinted window glass
- Full end details including train line hoses & HEP receptacles
- Cab cars feature 3 different antenna arrangements per era
- Unique interior details for each car type
- Detailed paint colors including separate colors for floors, walls, seats, tables, control compartment, etc.
- Business class cars feature complete upper & lower service areas
- Cafe cars feature complete kitchen & serving area
- Interior stair & luggage rack details
- McHenry® scale knuckle couplers - Kadee® compatible
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- Packaging securely holds model for safe storage
LED LIGHT EQUIPPED FEATURES:
- LED lighting for long life and reliable operation
- On-board DCC Decoder by NCE – Operates in DCC and Analog (DC) with lighting functions controllable in DCC
- LED Interior Lights
SOUND EQUIPPED MODELS ALSO FEATURE:
- Soundtraxx Tsunami SoundCar decoder w/ exclusive sounds recorded from actual Surfliner cars
- A/C compressor operation
- Doors opening & closing with associated beep
- Generic station announcements with associated beep for PA system use
- Vacuum toilet operation sound
- Clickety Clack rail sound
- Brake system sounds including brake set & application, and emergency brake air dump sound
- Cab cars feature authentic K5LA horn and bell
- Interior LED lights on upper & lower levels
- Working marker lights on car ends
- Cab cars feature working head & ditch lights
RTR 60Ft Gundreson Box Car - MTNR (3-pkg)
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO ET44 Tier 4 - DCC & Sound - CN/Veterans #3015
Road number 3015 has square exhaust
Road number 3233 has angled exhaust
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO FMC 5077 SSD Boxcar - WRWK/GATX #1411
MASTER MODEL FEATURES:
- Single or Double Sliding Door where appropriate
- Multiple body styles
- Metal knuckle couplers
- Plate B Box Car
- X-Panel Roof
N Scale Long Barrel Ore Hopper - CN Mineral Brown #346583
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO & N Scale TSU-N18 Tsunami2 Sound Decoder for GE Diesels
Dimensions: 25 x 10.5 x 4.1mm
Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output)
Function Outputs: 6
Audio Amplifier: 1 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
BIG sound in a small package! The small size of our new Tsunami2 TSU-N18 decoder makes it ideal for both N and small HO models that come equipped with a NEXT18 socket. Installations can not get any easier. Simply plug this decoder in and enjoy all of the Tsunami2 features you know and love!
You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive dynamic digital exhaust, functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. Soundtraxx also offers a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12 in each diesel version), whistles (90), airhorns (40+), couplers, dynamos and more!
The TSU-N18 can be wired to a CurrentKeeper to maintain performance over dirty track and switches.
HO McGraw Oil Company - Kit
Storage Tanks: 6-1/2 x 6-1/2 x 5 inches
Pump houses: 2-3/8 x 5-1/2 x 3 inches
FEATURES:
- Fits to 1930s to the 1970s
- Realistic brick office and pump house
- Arrange to fit available space on your layout
- Includes loading rack with piping
- Four steel storage tanks with retention berm
- Decal signs for several business names
- Molded in appropriate colors
HO ACF 50Ft 6In Boxcar - Pan Am #32024
FEATURES:
Prototypical non-terminating corrugated ends
Diagonal paneled roof
Single 10-foot YSD design sliding door (non-operating)
Detailed cross-member attachment rivets on the side sills
Weighted, detailed underframes
True scale dimensions with acccurate details
Equipped with AccuMate knuckle couplers
HO Scenic Accents(R) - Welders & Accessories (16pcs)
A set of three men, with protective welding helmets and gloves, working with an assortment of mig and spot welders, a plasma cutter and gas cylinders - complete with angle iron pieces.
Complete your scene and bring it to life with affordable works of art in HO scale. Sculpted in fine detail and hand-painted, they add color, humor and interest to any layout. Scenic Accents figures have a natural charm and a realistic appearance that steal the show! Attach with Scenic Accents Glue (#785-198) and position with Gentle Grip tweezers (#785-200).
HO New Look Bus - New York Bus Service - Pelham Bay Park - Deluxe #1485
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
HO EMD FT A+B Set - DC/DCC/Sound - AT&SF (Passenger Scheme) #167B + 167C
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
Double Headed Double Ended Pin Vise
Metal double headed/ended pin vise with double reversible collets at each end.
Collets have four different size openings.
A must have!!
9ml pan (D) - Paynes Grey Tint
Each PanPastel Color is loaded with the highest quality artists pigments; and is made using a unique manufacturing process requiring minimal binder, resulting in rich, ultra soft and low dust colors. PanPastel Colors can be mixed for an infinite palette of colors.
Each pan contains 9ml (0.30 fl oz) of color. 40percent more than the average pastel stick, and yielding approx. 4-5 times more coverage.
HO B-50-15 Boxcar - Rebuilt w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #15248
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
N Scale 2-Bay Hopper - ATSF #82142
These GA-105-class covered hoppers with Bettendorf trucks were built in 1957 in a series of 500 cars.
HO Scenic Accents - Road Crew Details (20pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
This set includes an assortment of Road Crew tools and supplies: warning signs, cones, a wheelbarrow, shovels, rakes, poles, a pile of ballast and a bucket.
HO AutoFlood III RD Coal Hopper - PGNX #1100
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO 36Ft RTR 3-Dome Tank Car - GATX #50042
Product Information
Add authentic cars to your steam- or diesel-era layout with these 36Ft 3-Dome Tank Cars from WalthersMainline! Serving a wide range of both producing and consuming industries, these cars were actually three tanks in one, ideal for handling smaller amounts, and a greater variety of product at once. Features of these cars include:
One time run of these roadnumbers, limited quantity available - order now!
Prototypes hauled petroleum, chemicals and similar liquid loads in three compartments
In service from late 1920s to 1960s
Detailed underbody with AB brakes
Fully assembled
Correct 33inch turned-metal RP-25 wheelsets
Proto MAX metal knuckle couplers
HO 60ft NSC 5150 3-Bay Covered Hopper - Archer-Daniels-Midland (ADMX) #52333
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO GE Dash 9-40CW - DCC & Sound - Norfolk Southern NS #9773
NS FEATURES:
Front and rear ditch lights (Alternately flash in DCC mode)
High-mounted head light and number boards
K5 horn
Electronic brakes
Graham White Electronic bell
Delivered new in 2003 from GE, NS took delivery of class 9745-9811 Dash 9-40CW locomotives. Some unique features include: electronic bell, high mounted headlight, and electronic parking brake. We are offering both versions of the front cab schemes to choose from!
ROAD NUMBER SPECIFIC FEATURES:
#9754 -White face- scheme
#9773 -Unibrow- scheme
#9806 -Unibrow- scheme
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Flexible Self-Adhesive Paved Roadway - Unmarked
39-3/8 x 2-5/8in
(1m x 66mm)
Pave HO Scale roads, streets and highways quickly and easily with Walthers SceneMaster Flexible Self-Adhesive Paved Roadway sets! Made from a unique flexible material that is self-adhesive, simply combine straight sections, and curves, or cut to fit and press in place. Each features a realistic surface color, as well as appropriately colored centerlines and fog lines along the outside edge of the pavement for modern or vintage paved roadways.
-Model North American roads in minutes
-Realistic surface color with correct striping for US roads in various eras
-Ready to use, self adhesive and flexible - easy to add to new or existing scenery
-Mix and match with other Roadway sections, each sold separately
Peco Code 100 Streamline Large Radius Wye Turnout, Insulfrog SL-98
Nominal radius: 24inch (610mm); Angle: 24 degrees; Length: 5-13/16inch (148mm)
Shipped from Ontario Canada.
Tru Color Paint - Acrylic - Railway Express Agency Green - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 20ft Reefer Container - CGM (3pk)
MODEL FEATURES:
- Highly-detailed, injection-molded body
- Blister packaging for easy viewing
- Decorated models fully-assembled and ready to run out of the package
- Reefer unit to match prototype
PROTOTYPE AND BACKGROUND INFO:
20ft refrigerated containers such as these are commonly used for the transportation of temperature-sensitive products. Constructed mostly of aluminum, the containers walls also incorporate thick insulation to help maintain a controlled temperature.
HO Thrall High Side Gondola w/Load - Herzog/White/Red #10104
MODEL FEATURES:
- Removable load
- Wire and plastic handrails, stirrup steps, ladders and underbody details
- Factory applied ladders, stirrup steps, and wire grab
- Highly-detailed, injection molded body
- 100-ton trucks with 36 inch wheels with RP25 contours operate on all popular brands of track
- McHenry scale knuckle spring couplers
- Highly-detailed, injection molded body
- Weighted for trouble-free operation
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Thrall was a recognizable freight car manufacturing company in the 1960s to 1980s. Their designs still carry on today. The company focused on building specialized freight cars including high side gondolas, and rotary-dump gondolas for coal. In the 1980s, Thrall acquired five competing railcar manufacturers and became the largest such manufacturer of these cars in the United States.
In the 1960s, coal haulage shifted from open hopper cars to high-sided gondolas. Using a gondola, the railroads are able to haul a larger amount of coal per car since gondolas do not include the equipment needed for unloading. However, since these cars do not have hatches for unloading the products shipped in them, railroads must use rotary car dumpers (mechanisms that hold a car against a short section of track as the car and track are slowly rotated upside down to empty the car) or other means to empty them.
HO BiLevel Commuter Car - New Mexico Rail Runner - Set #1
Albuquerque
Includes: Cab: 1102 Coaches: 1008, 1012 (Series 4)
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO GE AC4400CW - DCC & Sound - BNSF #5679
Detailed Information
BNSF FEATURES:
As-delivered appearance
Small plow
High mount number boards
Walkway mounted ditch lights
Late production units
K3 horn
BNSF/ATSF -Gullwing- style cab
Large roof GPS dome
Delivered in 2004, BNSF AC4400CWs 5654-5717 represented the continuation of a string of GE A.C. traction purchases dating back to 1999. As A.C. traction motors are well-suited to moving heavy loads at lower speeds, the units were usually found on coal trains, although they did appear on other types of service as well. Interestingly, in 2015, forty-one units (including 5665) were leased to Metrolink to serve as lead units while their cab cars were repaired, lasting in this service for about one year.
AC4400CW SERIES LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
50Ft High Cube Double Door Plug Box - Conrail #220991
MODEL FEATURES:
Fully assembled and ready for your layout
Underbody with brake system details
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE AND BACKGROUND INFO:
Railroad boxcars are perhaps not only the best-recognized pieces of equipment ever put into service but also one of the most identifiable symbols of the industry itself. During the early years of the industry freight was hauled on simple flatcars or early gondolas. In Upstate New York was the burgeoning Mohawk & Hudson Railroad, the first chartered system in the United States which later became part of the New York Central, came up with the novel idea of covering its gondolas in 1833 since the railroad dealt with snow throughout much of the winter. The cars development continued to improve over the years such as switching from basic wood construction with steel outside-bracing, within the same size specifications; 40 feet, a standard size employed by the American Association of Railroads (AAR). To better enhance crew safety, in 1968 the AAR legislated the removal of roof walks. The 40 foot boxcars needed to be -modernized- to adhere to the AAR mandate. This was to be completed by 1978 for cars in interchange service. Some of these cars had side and end ladders cut down, in some cases, modification included lowering the brakewheel. What made boxcars great, at least in the eyes of the railroads, was, their ability to haul about anything! Railroads thrive on redundancy to maximize efficiency.
ESU 50210 ECoS 2.1 DCC Command Station,
Full Color Display, MM/DCC/SX/M4, Set including power supply input 90-240V, output 6A / 15V-21V, 150W power supply, German /English manual
The ECoS 50210 is already the second generation of our successful ECoS command station. With the latest ECoS command station, ESU continues to offer state-of-the-art digital technology combined with contemporary functional range and easy handling all this for a fair price-performance ratio.
The ECoS has - like most of the recent central stations - a large coloured display with high resolution. In combination with its ground-breaking and easily operated user interface and excellent contrast values of the coloured screen, ECoS reaches unprecedented ergonomics: unlike all the other central stations, the ECoS can be also operated without a stylus - all symbols and writings are hugely marked and clearly structured.
ECoS has 9 function keys per integrated cab. The light-, and function keys 1 to 8 show the current state of the function via LEDs.
Discover the fascinating possibilities of the ECoS command station on the following pages. But take heed: ECoS performance is so good, that even we had to re-read a few passages to believe it!
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .010In x 6In x 12In (4 pcs pkg)
HO Scale 89ft Channel Side Flatcar - Trailer-Train/JTTX #930098
(yellow, black; General Service)
Built especially for the bigger trailers entering service in the 1960s, this Walthers Mainline model of the 89ft channel side flatcar is a must for period intermodal modeling in HO scale. Based on the F89F flatcars owned by Trailer Train and many railroads, over the years these cars carried 28, 40, 45, 48, and 53ft trailers.
FEATURES INCLUDE:
- One time run of these road-numbers, limited quantity available!
- Heavy die-cast metal underframe for great performance empty or loaded
- Used in piggyback and other service 1963 to the present
- Prototypical C-shaped steel channel side sills
- Detailed brake gear
- Swinging coupler pocket for 18 inch radius curves
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Built-&-Ready Landmark Structures - Old Weathered Barn
Assembled - 7-13/16 x 5-11/16 inches (19.8 x 14.4cm)
Fully assembled and weathered traditional gambrel barn features a concrete silo, fieldstone foundation, shake shingled roof, hayloft door with pulley and rope plus a cupola with vintage weather vane. Siding, windows and barn doors are in various states of disrepair.
Flush Cutting Razor Saw - 16 Teeth Per Inch
The Zona Thick Kerf Dovetail Saw has an 16 teeth per inch blade, an .012 kerf that measures 6-1/2inch with a cut depth of 1-1/4inch and cuts on the pull stroke. This saw has a shortened steel back for added flexibility and a hardwood handle. The teeth on this flexible blade have no set so they will cut dowels, pegs and plugs off without marring work surfaces.
HO 35Ft Fruehauf Integral-Post Volume Van - Silver/Unlettered
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
HO - Nathan K5R25 5-Chime Air Horn - Lost Wax Brass Casting
X-2F Horn-Hook Couplers, pkg(12)
Walthers Cornerstone Horn-Hook Couplers are direct replacements for the older-style X-2F couplers in Walthers rolling stock kits. Couplers are molded in Delrin(R) plastic. Horn-Hook Couplers will not couple to knuckle couplers.
Fits rolling stock with older-style horn-hook couplers
Direct replacement for couplers in Walthers rolling stock kits
Molded in Delrin(R) plastic
12 per pack
HO AutoFlood III RD Coal Hopper - CEFX (6pk) #3
Includes the following numbers, all individually packaged:
#600600
#600612
#600626
#600644
#600568
#600673
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO WC22 Tractor w/Flatbed Trailer - Peoples Beer
Street scenes come to life in seconds with these fully assembled, licensed replicas of American autos and trucks! Great for steam-, transition- and diesel-era layouts, the selection includes popular models from the 1940s to the 70s, which also look great as restored collector cars in modern scenes. Off the layout, the small size is ideal for collecting and display. The highly detailed diecast bodies are painstakingly finished in official factory paint colors. Next, they are pad printed to capture other details like chrome trim and graphics. The models also feature plated parts to simulate chrome hubcaps, wheels, grilles and bumpers. Clear plastic windows, as well as real rubber tires complete the standard equipment on every model.
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Penn Central Rack, Trailer Train Flatcar (TTBX) #961924
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
PS-2 2003 2-Bay Covered Hopper - Southern Pacific #401509
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
Youth Football Players
A set of kids playing a game of five-on-five in full uniform. A linebacker covers a wide receiver, a cornerback takes after the quarterback, with a blitzer on his tail. Also includes an assortment of offensive and defensive linemen.
Set contains 10 pieces. Colors may vary from actual product.
HO EMD GP7 - DC/DCC Ready - Burlington Northern BN #1629
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
BN FEATURES:
Roof-mounted -Torpedo Tube- air tanks
Winterization Hatch
Cab-mounted Beacon (Functions in DCC)
Fire-cracker antenna
Roof-mounted steam era bell
The Burlington Northern Railroad came into existence in March 1970 when the ICC gave the ok for the Chicago, Burlington & Quincy, Great Northern, Northern Pacific and the Spokane, Portland & Seattle railroads to formally merge and form one company. One result of the merger was the creation of a large group of GP7s on the roster with different features. The two ex-Northern Pacific GP7s offered in this Genesis release came with roof top air tanks in order to equip them with larger fuel tanks to extend their operating range.
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO GE AC4400CW - DCC & Sound - Quebec Cartier Railway QCM #21
Detailed Information
QCM FEATURES:
Medium plow
Low mount number boards
Walkway mounted ditch lights
Mid/late production units
Long hood mounted red beacon
5-chime horn
GE style self-steering trucks
The Quebec Cartier Railway (QCM) operates approximately 260 miles of track in the Canadian province of Quebec hauling large amounts of Iron Ore. Known for their fleet of Alco locomotives, QCM turned to GE for a small batch of new AC4400s beginning in 2001 to replace their aging Alco fleet. A unique feature of these units is a red beacon mounted on the long hood which operates in the cold weather climates to warn against possible freezing coolant.
AC4400CW SERIES LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Atlas Brush Company 155-50 5/0 Taklon Detail Brush
HO 59Ft Cylindrical Hopper - Toronto, Hamilton & Buffalo #1517
(black, white; Bow Tie Logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
One time run of these roadnumbers, order now - limited quantity available
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
DC/DCC/Sound - Alco FB-2 New York Central (Lightening Stripe) #3366
FB-2 and FPB-2 models feature:
Operating back up lights. As appropriate.
Roadname specific details with or without dynamic brakes. As appropriate.
The only HO scale Alco/MLW B unit with accurate phase details including vertical or horizontal battery box louvers and etched metal Farr or mesh side grilles.
Canadian or American cast Type B trucks. As appropriate.
Full underbody piping and conduit.
Correct roadname and manufacturer specific FB-2 and FPB-2 fuel tanks.
New York Central features:
Phase 2 body with horizontal battery box louvers and Farr grilles.
Dynamic brakes
Alco welded fuel tank
GSC cast Type B trucks
HO F30A 50Ft Flat Car MOW w/Deck Rails - Conrail (CR MOW) #58721
This car does NOT include sleeper or camp vans
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
N Scale 89Ft Flat Car - CSX (Rail Repair) - 3pkg
This 89Ft flat car with Barber Roller Bearing trucks is used by CSX Transportation in Maintenance-of-Way service carrying sectional rail for use in track repair from damage occurring from rockslides, washouts, and derailments, as well as upgrades to branch lines and industrial trackage around the CSX network. CSX was formed through the 1986 mergers of Chessie System and Seaboard System/ Family Lines, and continues to operate today across more than 21,000 miles of track in the Eastern United States.
3D printed rail repair holder will come unassembled and undecorated
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Minneapolis & St. Louis (M&StL Red) #54992
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO GP50 - DCC & Sound - Chicago & North Western #5082
Detailed Information
CNW FEATURES:
Phase I Body
Nose-mounted -Gong- Bell
Winerization Hatch
Small EMD plow
Leslie 3-chime horn
Sinclair antenna
Western Cullen style beacon (Operational in DCC)
Originally purchased for fast TOFC freights, these units were used in many different applications before being absorbed into the UP merger.
GP50 LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Walkway tread
Lift rings
Sander lines
Windshield wipers
McHenry scale knuckle couplers - Kadee compatible
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO Concrete Block Walls - 14-1/2 x 9-1/4Ft Scale - short sections 4 each
Product Information
Molded in gray plastic, use to create warehouses, gas stations, garages and other concrete structures. Measurement is in HO Scale feet.
HO MOBILE OFFICE CONTAINER MOBILE MINI
Features:
- All New Tooling
- Accurate Doorway, Window and Light Fixture detail
- Separately applied parts include air conditioner units and electrical equipment
- Crisp Painting and Decoration
HO ALCo RS-3 - DCC Ready - CP Rail (Multi-Mark) #8430
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO 1.25 Amp Scale Mobile Decoder - Fits Atlas, Intermountain, LifeLike & Other Factory Sound-Equipped Locomotives
Features:
6 FX3 functions, .5A.
DH165Q1 fits Atlas, Intermountain, LifeLike & Other factory sound-equipped HO Locomotives.
Compatible with Digitrax Sound Bug.
Decoder Lock equipped
QSI-style PCB replacement Plug NPlay decoder-
Allows replacement with new technology downloadable SFX SoundBug modules
Accepts Plug-in SFX SoundBug sound modules
Excellent power management-
Booster or Programmer overloads
Regulated Headlights: convenient no-resistor install of LEDs and lamps.
Digitrax LocoMotion System-
Your locomotives look like the real thing. The Digitrax LocoMotion System makes them run like the real thing, too!
Torque Compensation for smooth as silk silent operation.
128 Speed Step operation (14 or 28 steps can also be used).
Momentum with acceleration and deceleration.
Normal Direction of Travel is user selectable.
3 Step Speed Tables set start, mid and max voltage for custom control.
28 Step Speed Tables with 256 level resolution for precise control.
Scalable Speed Stabilization with simple setup & 1024 level resolution.
SuperSonic motor drive for silent operation.
FX3 Functions for prototypical lighting effects:
Constant Brightness Lighting directional or independent control.
Realistic Effects like Ditch lights, Mars lights, strobes, and many more.
Dynamic and Static Qualifiers operate functions based on direction, F0 on or off, loco direction and F0, and whether loco is moving.
Function Remapping for custom function setup.
Master Light Switch turns off all lights & functions with one keystroke.
Advanced Consist Function Controls
Transponder equipped ready for transponding on your layout.
Compatible with digital surround sound systems
All Mode Programming with Operations Mode Read Back-read back CV values right on the mainline.
Decoder Factory CV Reset with or without speed table initialize.
Motor Isolation Detection prevents damage to your decoder.
Basic, Advanced & UniVersal Consisting
2 Digit and 4 Digit Addressing
HO GE Dash 9-44CW - DCC & Sound - Burlington Northern Santa Fe (BNSF Wedge) #4484
BNSF FEATURES:
High-mounted number boards
K3 horn
Front ditch lights
ATSF -Gullwing- cab
Standard brass bell
Part of BNSFs order in 1999, these were originally painted in the -Heritage 2- scheme from the factory. Over time with normal wear and tear, these units paint began to fade. As they got outshopped for major repairs, some were repainted into BNSFs current -Wedge- scheme. It was also common to see different variations of paint and parts used. Air conditioners and antennas were commonly changed out over time as seen on other equipment. We offer these variations based on collected research photos.
ROAD NUMBER SPECIFIC FEATURES:
#4433 Standard large dome antenna
#4437 Large dome antenna with dual -Skate- style antennas
#4484 Standard large dome antenna
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Super Sharp Stainless Steel Blades (5pk)
Light Duty Replacement Blades (Fit K1, K3, K17, K18, K30 & K40 Handles)
HO SP C-40-3 Steel Cupola Caboose - Southern Pacific (Serif with NO Underline) #1101
1953+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
#153 Short 1/4inch Shank
All-metal -whisker- coupler with metal self-centering spring. Designed and tested for reliability, durability and long life. Compatible with Kadee HO couplers. Fits most HO scale equipment; can be used in place of No. 5 coupler.
HO Pre-Blackened Brass Chain - 12 Inches - 40 Links Per Inch
A-Line Chain is great for detailing all kinds of models in all scales. Available in a variety of sizes measured as links per inch, chain is also available in multiple kinds of metals.
HO 85ft General American G85 Flatcar - GTTX (Yellow) #300553
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
Flexi Edge for Roads (18 inches long)
Striping roads has never been easier! Paint straight or curvy lines cleanly and confidently. Scale ruler helps you mark sidewalks, roads, parking lots and other markings on paved areas to scale accurately. Raised inking edge prevents smears. Use edge for alignment and marked guide for correct road-striping markings. Create track plans and custom templates. Retains curve without having to hold it.
Ruler markings include scaled grid for striping N, HO and O scale roads and 40ft scale ruler for N, HO, and O. Ruler information also includes scaled measurements for the width of N, HO, and O parking spaces, sidewalks, rural roads, and highways.
HO Code 70, 75, 83 Nickel Silver Rail Joiners - North American-Style (24/pkg)
Recommended to be used with:
- PECO Code 75 and Code 83 track systems for 00/H0 HOm and HOn3
Dark Ghost Gray Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - SOO Line #136192
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
N Scale 48ft Rib-Side Container - APC #481713
These 48ft rib-side containers are aluminum with red vertical band and large Red Eagle logo on both sides. At 48ft in length, these containers are commonly seen filling the space in the bottom position of intermodal well-cars, with equal-length or longer containers above them. Now branded American President Lines, APL operates container ships, and intermodal rail and truck services around the world.
HO GE Dash 9-44CW - DC/DCC Ready - Union Pacific UP #9578
UP FEATURES:
High mounted number boards
K3 horn
Front ditch lights
Standard brass bell
SP body details
After the 1996 acquisition of the Southern Pacific, UP inherited Dash 9-44CW locomotives from the SP. As it was time for major maintenance, they
were eventually repainted into their new owners colors.
ROAD NUMBER SPECIFIC FEATURES:
#9578 Ex-SP 8114, Yellow sill, UP lettering w/o Flag, UP style plow, Sinclair antennas
#9599 Ex-SP 8135, Red sill, Sinclair antennas, SP style plow
#9647 Ex-SP 8173, Yellow sill, Sinclair antennas, small GPS dome, SP style plow
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO 12Ft FMC 5327 Plug Door Box - QGRY #77124
All new tooling with accurate dimensions
Photo-etched cross-over platform
Separately applied grab irons, end ladders and brake wheel
33in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
All models are representative of prototypical paint schemes
Minimum radius: 18in
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of ?In Service? equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
PROTOTYPE AND BACKGROUND INFO:
It was the mid 1970s, and the incentive per diem box car boom was just beginning. New, brightly painted box cars seemed to appear overnight. Many were lettered for various short lines. FMC (Food Machinery Corporation) was a significant builder of many of these cars. The 50? outside post, non-terminating end box car, became the foundation for new per diem cars built in the 1970s. The 50? FMC cars also varied in door configuration and style to better suit each customer. These models can still be seen today in the modern railroading scene.
HO Intermountain 4-Panel Coalporter, Canadian National
CNA Website scheme
Features:
Sharp Painting and Lettering
Prototype Accurate Paint Schemes
Multiple Road Numbers
InterMountain 100 Ton Trucks with 36in Metal Wheelsets
Metal Knuckle Couplers
HO ET44 Tier 4 - DCC & Sound - Kansas City Southern #5014
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO EMD SD60M - Standard DC - Soo Line #6061
FEATURES:
- Limited edition - one time run of these roadnumbers!
- Prototypes in service 1989 to the present in main line & regional service
- First SD60M safety cab with three-piece windshield
- Open grating on steps
- 21-pin DCC plug
- Same powerful drive as WalthersProto(R) locos featuring:
5-pole skew-wound motor
14:1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant & directional LED headlights
- Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately
- RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
HO EMD GP40 - DCC & Sound - Wisconsin Central #3011
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO Amtrak NPCU Cabbage - DC/DCC/Sound - Amtrak (Phase V) #90225
The Rapido Trains HO scale Amtrak NPCU -Cabbage- features:
Fully powered, available in silent DC or DC/DCC/Sound
DC models are DCC-ready with a 21-pin plug
Accurate enlarged marker lights, supplementary air reservoirs and K5LA horn
Operating, flashing ditch lights
Operating strobe lights and marker lights
User-controlled operating number boards
Etched-metal radiator grilles and windshield wipers
Separate handrails and grab irons installed at the factory
Rapidos proven 5-pole, skew-wound motor and silky-smooth drive system
Metal, magnetic Macdonald-Cartier Couplers mounted at the correct height
Second release paint schemes include:
Amtrak Phase III
Amtrak Phase V
Amtrak Phase V -Downeaster-
Amtrak -Salutes Our Veterans-
HO Enterprise 2-Bay Covered Hopper - MSGX (Flo-Sweet) #118
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO B-50-15 Boxcar - Rebuilt w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #15564
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
G (1:24) Custom Right Turn Staircase (1pc)
Use in interior applications where a closed casing or spiral staircase is desired. Combine with other staircases to achieve any configuration. Precision Injection Molded in Styrene Plastic.
SCALE
G
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
19/64In
HEIGHT IN MM
7.5mm
WIDTH IN INCHES
1-9/16In
WIDTH IN MM
39.7mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
2-3/8In
LENGTH IN MM
60mm
HO Maxi I Well Cars w/40ft Containers - DTTX #73006 (5pk)
Era: 1971-1990, 1991-2009
MODEL FEATURES:
- Fine ladder detail
- Separately applied brake piping and trainline hoses
- Weighted for optimal performance
- Body-mounted McHenry lower shelf operating scale knuckle couplers
- Prototypically correct 33 and 38 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Scenic Accents - Firemen to the Rescue (8pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
A set of firemen, a little girl, a dog, cat and a ladder. One fireman cares for the little girl, one fireman is signaling above his head, one fireman is standing, watching another fireman on a ladder rescue a treed kitty.
DC/DCC/Sound - MLW FB-2 Canadian Pacific (script lettering) #4466
FB-2 and FPB-2 models feature:
Operating back up lights. As appropriate.
Roadname specific details with or without dynamic brakes. As appropriate.
The only HO scale Alco/MLW B unit with accurate phase details including vertical or horizontal battery box louvers and etched metal Farr or mesh side grilles.
Canadian or American cast Type B trucks. As appropriate.
Full underbody piping and conduit.
Correct roadname and manufacturer specific FB-2 and FPB-2 fuel tanks.
Canadian Pacific features:
Phase 2 body with horizontal battery box louvers and Farr grilles.
Dymanic brakes
CP fabricated water tank
Dofasco Type B trucks
HO 89Ft Bethlehem Flush-Deck Flatcar - Santa Fe #296640
Product Information
From the 1970s to the present, these WalthersProto 89Ft Bethlehem Flush-Deck Flatcars are a must for modeling trailer-on-flat-car service on your HO layout!
Designed especially for use with overhead- or side-loading cranes, these later variations of the 89Ft flatcar eliminated the deep channel sidesills that served as rub rails when trailers were driven on or off the cars. Introduced in the 1970s when 40Ft trailers were still standard, the cars were later updated to handle the bigger 45Ft trailers that came into service in the early 1980s by repositioning the hitches. These cars would remain the backbone of intermodal fleets for years, and were later put to work fitted with autoracks and specialized loading equipment where some can still be seen today. A verstaile addition to your freightcar fleet, these WalthersProto models are available in several authentic versions and feature:
Limited edition - one time run of these roadnumbers
Prototypes handled 28Ft, 40Ft, 45Ft, 48Ft & 53Ft trailers
Factory-installed grab irons
ACF or P-S style hitches included as appropriate
Bridge plates as appropriate
Detailed underbody with brake gear
70-ton roller bearing trucks
Ultra-smooth rolling metal axles & 33Inch wheelsets
Proto MAX(TM) metal knuckle couplers
N Scale Single Plate Girder Bridge - 7-5/16 Inches - Gray
3/32In Fluorescent Red Rod (8pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Red
HEIGHT IN INCHES
3/32In
HEIGHT IN MM
2.4mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Union Pacific Rack, Trailer Train Flatcar (TTBX) #963125
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Western Pacific #20001
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
N Scale 50Ft Airslide Covered Hopper - General American Transportation Corp. GATX #46576
Product Information
Built in the early 1970s, these 50Ft two-bay Airslide hoppers with Barber Roller Bearing trucks featured the GATX -Service Driven- logo. These cars were specially designed with an air-permeable layer inside the bays that could help loosen fine-grained commodities that would often settle en-route, like powdered sugar, thus making unloading easier. General American Transportation Corporation, now known simply as GATX, is a large railcar leasing company, with over 122,000 railcars in the fleet.
This ready-to-run N Scale 50Ft Airslide Covered Hopper from Micro-Trains features an injection-molded styrene body, a die cast underframe, free-rolling engineering plastic trucks with contoured axles and Magne-Matic(R) magnetic knuckle couplers. Other features include detailed separate fine-profile foot stirrups, fine-profile brakewheel and fine decoration. Patterned after two-bay cars built beginning in the 1960s and used into the 21st century, the 50Ft Airslide Covered Hopper is an ideal addition to your diesel-era freight consists. Check out the selection of Micro-Trains monthly N Scale freight car releases.
HO Greenbrier 7550 cf 60' Plate F Boxcar - BKTY (UP Yellow) #160068
Aurora Miniatures North America Inc. is proud to offer the HO Greenbrier 7550 cf 60? Plate F Boxcar, in multiple road name-specific and era-specific detail variations. The replica of this iconic 21st century 60? boxcar shares the same epic design philosophy and attention to detail as our previously-released 50? version. No other model train manufacturer?s previous attempts come close to matching the Aurora treatment! DO NOT SETTLE FOR SECOND BEST? AURORA MINIATURES IS #1!
Model Features:
The ultimate, end-all HO scale model of this popular boxcar!
Based on multiple variations of the 60? Plate F boxcars built by The Greenbrier Companies from 2003 to present day.
All-new model, meticulously designed using various prototype resources with unrivalled accuracy and attention to detail.
Highly detailed, injection-moulded plastic body with accurately rendered detail variations.
Separately applied ladders, handrails, grab irons, coupler cut levers and air hoses.
Fully replicated underbody details: control valve, two-sided release road with mounts, empty/load sensor, diagonally mounted air reservoir, brake cylinder, low-mounted brake rods, full piping details connecting all components.
Separately applied vertical wheel handbrake with release lever, handbrake chain and bell crank on B-end.
Near-scale size draft gear box with side key detail and cushion detail.
Aurora-designed 100-ton roller-bearing freight car truck system with sideframe variations, fully replicated bolster & center plate detail, side bearing and brake beams.
NMRA RP-25, Code 110, machined metal 36? wheelsets featuring rotating bearing caps, prototypical wheel contour and axle tapering.
Rotating ?Timken? or ?Brenco? bearing caps, per prototype.
Aurora Janney scale head couplers installed.
Precision painting and lettering.
Multiple road numbers offered for each paint scheme.
HO RTR 40Ft Single-Door Steel Boxcar - New Haven #36185
(vermillion, black, white)
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. Check out the entire line of Bowser HO Scale ready-to-run boxcars.
HO 55Ft Evans 4780 Covered Hopper - ADM (UELX) #10009
Product Information
Expand grain traffic along your HO railroad with a fleet of WalthersProto 55ft Evans 4780 Covered Hoppers! Introduced in 1977 and still going strong today, they can be found handling all types of grains and dried distillers grains used for animal feed. Fully assembled and ready for service, features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint and lettering
Ultra-smooth rolling 36inch RP-25 turned wheelsets
Proto MAX(TM) metal knuckle couplers
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Canadian National #621333
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Enterprise 2-Bay Covered Hopper - Canadian National (MOW Red) #53317
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO Modern 50Ft Highway Overpass - with Pier
The Rix Modern Highway Overpass for HO scales is modeled after the bridges built today to span over railroad tracks. This style of bridge is typical of most new construction and is used all over the country. The Rix Modern Highway Overpass consist of 50 foot spans which interlock together so that any length bridge can be built. The piers are designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy.
HO 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - DM&E #29258
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Prototypes in service from late 1980s to the present
- Separately molded and applied hopper gates
- Correct 36 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
N Scale 50ft FMC Combo Door Boxcar - Railbox/ABOX (Late) #50113
Era: 1971-1990, 1991-2009, 2010-Present Day
MODEL FEATURES:
- Screw mounted, Roller bearing style trucks
- Scale profile brake wheel
- Accurately painted and printed for prototypical realism
- Body-mounted, McHenry operating scale knuckle couplers
- Machined metal wheels operates on Code 55 and 80 rail
- Weighted for optimum performance
- Highly detailed, injection-molded body
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Curved Track - 22.5 Degrees - 28-3/4 Inch Radius (4pk)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes. Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation! Suitable for all types of layouts, whether temporary or permanent. This modular track system features an integrally molded roadbed for realistic appearance. Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
HO Lightweight Coach - Amtrak - Phase I #6443
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
Bachmann HO - Rollers Road w/ Rollers and Wheel Cleaners
Keep your drive wheels clean with this handy tool. Includes roller base, six rollers, and four cleaners. Works with both DC and DCC engines. For locomotives up to 19.7 inches long (50 cm).
Speaker Gasket Kit - 40 x 28.5 mm (4pk)
Package of four gaskets for mounting our 40 x 28.5mm oval speakers (P.N. 810078).
HO 85ft Plate Girder (4)
HO GMD-1 - DC/Silent - Canadian National (1900s Green) #1912
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
HO FM H-24-66 Train Master Phase 2 - Silver DCC Ready - CP Rail #8917
Separately-applied door handles
Real metal springs on trucks
Realistic die-cast underframe
Five-pole skewed armature motor with dual-flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate? couplers
Painted crew figures
Separately-installed fine scale handrails
Etched metal radiator grilles
Electronic Dual-Mode Decoder (e-DMD) (Gold Series only) that allows your locomotive to run in DCC or DC
NMRA 8-pin plug for DCC (Silver Series only)
Railroad specific details (Lighted classification lights on some models
Atlas Master? Series Silver Additional Features:
NMRA 21-pin plug for DCC (Decoder-ready)
Sound Features for Gold Series :
(DCC Operation)
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F31 .
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes ?on the fly? are provided for true realism.
AccuMate? couplers are made under license from AccuRail, Inc.
Silver Sound Ready
Bowser 25218 - HO ALCo RS-3 Phase 3 - DCC & Sound - Nickle Plate Road #553
Ready To Run with Locomotive specific details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC. DCC/Sound version features LokSound V5 decoder.
Spray Can - Field Gray #2 (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Offering total control for fine detail spraying, Iwatas High Performance Plus Series airbrushes are designed around the legendary Iwata HP Series which established the Iwata name in the creative community over 50 years ago. Iwata High Performance HP-C Plus has a generous 0.24 oz / 7 ml fluid cup that is ideal for color mixing.
Loaded with features, Iwata High Performance HP-C Plus has a quick flush cutaway preset handle that allows easy access to the needle so that you can quickly empty the paint reservoir for cleaning. The preset feature allows you to set the spray output, which increases your control while reducing finger fatigue. Iwatas spring-steel needle resists breakage and our needle packings are solvent resistant for longevity.
Also included is our Iwata nozzle spanner that is used to remove the nozzle for cleaning and Iwata Lube, which lubricates the needle and main lever mechanism. Iwata High Performance Series airbrushes set a high standard many years ago and continue to be revered today.
HO Modern Yard Tractor - Norfolk Southern #562821
Completely assembled
Many separately applied parts
Interior details
Rubber tires
Photo-etched steps and rear deck
Adjustable 5th wheel height
Clear window glazing
As seen in intermodal yards around the country
PROTOTYPE AND BACKGROUND INFO:
A terminal tractor, also known as a yard tractor, is a kind of semi-tractor intended to move semi-trailers within a cargo yard, warehouse facility, or intermodal facility, much like a switcher locomotive is used to position railcars.
HO AutoFlood III RD Coal Hopper - GLFX #8076
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Modern Police Station - Kit
City or suburb, keep the peace in your HO community with the Cornerstone Modern Police Station kit! With a contemporary design perfect for the early 2000s to the present, the finished model is typical of facilties used by city, county and state police agncies all across North America. Similar buildings can be found in smaller communities where they serve as the village hall and local municipal building too!
Other features include:
Highly detailed with glass atrium and brick walls
Separate doors, windows, gas meter, air conditioner, nonworking lights and electrical panel all included
Printed signs for Washington, Franklin & Springfield Police, window blinds, fire lane markers and warning signs included
Molded in four colors with tinted plastic windows
Dimensions: 8 x 7-5/8 x 3 inches (20.3 x 19.3 x 7.6 cm)
Static Grass Flock 57.7 in(3) - Harvest Gold
Use Harvest Gold to model dried or dormant grasses or weeds.
Static Grass Flock is a fiber product that models grass and/or weeds. It is available in six colors and can be used alone, or with Fine Turf. Place under trees, along ditches or as forest litter. Attach with Scenic Cement. Fiber length 1 - 3mm.
N Scale GSI 48Ft Bulkhead Flat Car - BC Rail #51738
Features:
Die-cast body
Detailed deck
Detailed bulkhead lattices
Read-to-run
Superb paint & Lettering
Self Adhesive Spring Grass Tufts - 4mm (100pkg)
These handy packs contain 100 self adhesive ready made tufts, to stick down wherever required on your layout or diorama.
Bulk Material Storage - Kit
Product Information
A unique addition to all kinds of HO industries, businesses and railroad operations, the Cornerstone Bulk Materials Storage facility adds a neat detail to any scene! Features of the detailed structure kit include:
Prototypes store and separate all types of bulk materials
Great detail for landscapers, maintenance-of-way yards, and industries that use bulk materials
Molded in light gray
Measurements: 8-7/16 x 2-3/16 x 2-7/16inch 21.3 x 5.5 x 6.1cm
Athearn - HO RTR PS-2 2600 Covered Hopper - Missouri, Kanas & Texas #1326
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
Code 100 Nickel Silver Rail Joiners (48/pk)
Micro Engineering code 100 slip-on rail joiners are by far the best available! Nickel silver construction and a low profile makes for a discreet, reliable connection between lengths of rails.
Micro Engineering rail joiners are made from a very thin material, they can be placed on top of wood ties without creating interference.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0005
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Slab-Side Covered Hopper - Canadian National CN #113427
Features:
Highly detailed
Prototypically accurate
Era-appropriate paint schemes and lettering
Product Information
This detailed, ready-to-run Atlas Master HO Scale Slab-Side Covered Hopper is a highly detailed model of a car that was a mainstay for hauling all kinds of granulated materials. The Atlas model of this distinctive car is available in 6, 8, and 12 hatch versions, with or without the side sill openings. The Slab-Side Covered Hopper features a detailed, injection-molded body, appropriate trucks with metal wheels, body-mounted AccuMate knuckle couplers and accurate decoration. The development of the covered hopper car for the transport of bulk commodities for the agricultural, chemical, and construction industries entered a new phase in the late 1940s, when the shops of the Canadian Pacific Railroad introduced a 70-ton, 3000 cubic foot, interior braced hopper with smooth, welded sides similar in appearance to the Canadian offset side open hoppers of the era. This -slab side- design actually maximized the interior width of the car, thereby lowering the center of gravity and improving tracking stability. Cars of this design were produced from 1950-1964 by National Steel Car Company, Canadian Car and Foundry, Marine Industries and even Montreal Locomotive Works. Over the years of production, a number of different roof hatch arrangements for product loading were available, and the openings along the side sills - an early design change made by CP to give better access to the discharge mechanisms - became standard on all cars produced after 1954. These cars were a common sight on Canadian and US rails through the late 1990s hauling grain, malt, sugar, cement, or even sand for company use.
HO 57ft Mechanical Reefer - Union Pacific/ARMN #756036
Move all kinds of perishable products on your HO railroad with Walthers Mainline 57ft Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s.
Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including:
-Limited edition - one time run of these roadnumbers
-Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
-Keystone or Hydra-Cushion underframe detail as appropriate
-Short ladders and low hand brakes
-9ft Youngstown plug door with separate latch bars
-Authentic Stanray peaked, ribbed roof with capped exhaust stack
-Detailed underbody with brake gear and fuel tanks
-70-ton roller bearing trucks
-Correct 33in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO RTR SD40T-2 - DCC & Sound - Ohio Central #4026
OHCR FEATURES:
Ex SP
Welded/removed gyralight nose
Modified L window cab
Unique rear stripe art per road number
ROAD NUMBER #4026 FEATURES:
Standard ditchlights
UP-style plow
a/c
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Separately applied air tanks
See through cab windows
Welded ECAFB
Photoetch windshield wipers
LED Lighting
HTC truck sideframes
All-wheel electrical pickup
See-through dynamic brake fans
-Mushroom- nose vent on right side
Separately applied wire grab irons
Fully assembled and ready-to-run
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox speific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body
Painted and printed for realistic decoration
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for troublefree operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Replacement parts available including motor brushes
Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard Econami Sound by SoundTraxx
Sound units operate in both DC and DCC
Sound units operate in both DC and DCC
All functions NMRA compatible in DCC mode
Full DCC functions available when operated in DCC mode
Some functions are limited in DC
Engine, horn, and bell sounds work in DC
Slow speed control
All functions NMRA compatible in DCC mode
CV chart included in the box
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
Diesel EMD SD40-2 - Saint Lawrence & Hudson #5627
ESU LokSound DCC & Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
Acrylic Thinner - 250mL
Tamiya X-20A acrylic thinner is the perfect choice to thin Tamiya acrylic paint when spraying through an airbrush or cleaning bristle brushes. The formula within the thinner gives Tamiya acrylic paints the right consistency to blend colors without fading or spotting. This bottle is 250ml in size.
HO 40Ft Wood Reefer - Canadian National #207123
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch
HO 50ft PS-2 CD 4427 Covered Hopper - Northern Pacific #76290
Add a signature car to your covered hopper fleet with the Walthers Mainline 50ft Pullman-Standard PS-2 CD 4427 3-Bay Covered Hoppers!
Fully assembled and finished in a variety of colorful schemes perfect for 1960s to early 2000s layouts, features include:
-Limited edition - one time run of these car numbers!
-Prototypes handled all types of grains, feed and similar loads
-Matches prototype dimensions
-See-through running boards
-4-3-4 exterior rib pattern
-Bottom outlet gate details
-Placard name plates as appropriate
-Correct 36in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO 60ft NSC 5150 3-Bay Covered Hopper - BNSF #495376
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 40ft Low-Cube Container - EASU (3 Pack) #2
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered with new road numbers
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200075
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #677023
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO Hawker-Siddeley Van - Caboose - Canadian National - Late - (Black Steps) - #79229
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
HO 72Ft Single-Track Plate Girder Bridge
Early - Staley #35058
5-1/2in Long, Cut #2 Needle File - Triangle, Carded File (1pc)
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504823
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
HO 60ft PS Flatcar - Trailer Train/VTTX #97697
(yellow, black TT logo)
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO ACF 2970 Covered Hopper - CSX/Tan #226710
MODEL FEATURES:
-Round or trough hatches
-Photo-etched metal roof walk
-Separately applied wire grab irons and stirrup steps
-Separate brake cylinder, valve and air reservoir with wire brake plumbing
-Detailed outlets
-Multiple road numbers
-Fully-assembled and ready-to-run out of the box
-Accurately painted and printed
-Highly detailed, injection molded body
-Separately applied brake wheel
-Machined metal wheels
-Screw mounted trucks
-Body mounted McHenry operating scale knuckle couplers
-Weighted for trouble free operation
-Wheels with RP25 contours operate on all popular brands of track
-Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
-Minimum radius: 18in
PROTOTYPE INFORMATION:
The 2-bay covered hopper first entered service in the 1950s. The cars handle loads such as cement, sand and similar denser bulk commodities. In the 1960s, American Car and Foundry introduced the Centerflow design. The Centerflow relies on the cars rounded body to provide structural strength without the added weight of bracing, as well as making gravity unloading easier. This 2-bay car came in a 2,970-cubic foot capacity.
HO H21E 4-Bay Hopper - Pennsylvania (PRR Red, Circle Keystone) #727129
1948+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Gulf Oil #15292
Built: BUILT 9-30
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
N Scale 50ft FMC Combo Door Boxcar - Railbox/ABOX (Late) #50078
Era: 1971-1990, 1991-2009, 2010-Present Day
MODEL FEATURES:
- Screw mounted, Roller bearing style trucks
- Scale profile brake wheel
- Accurately painted and printed for prototypical realism
- Body-mounted, McHenry operating scale knuckle couplers
- Machined metal wheels operates on Code 55 and 80 rail
- Weighted for optimum performance
- Highly detailed, injection-molded body
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
11/32 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 11/32 inch
Figurines - Travelers (6)
N Scale 50ft FMC Combo Door Boxcar - Railbox/ABOX #51180
Era: 2010-Present Day
MODEL FEATURES:
- Screw mounted, Roller bearing style trucks
- Scale profile brake wheel
- Accurately painted and printed for prototypical realism
- Body-mounted, McHenry operating scale knuckle couplers
- Machined metal wheels operates on Code 55 and 80 rail
- Weighted for optimum performance
- Highly detailed, injection-molded body
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO RTR 68Ft Bulkhead Flatcar - Trailer Train TTPX #82037
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
HO Pattersons Hardware - Cast Hydrocal Kit
DIMENSIONS:
3-1/2 x 5 inches
This typical American small town hardware store features beautifully detailed hydrocal castings, full color signs (including the sandwich board sign advertising TVs for the front of the store), plastic doors and windows, a small stretch of weathered sidewalk, complete, easy to understand painting and weathering instructions and even a small TV so you can detail the store front window.
SD45-2 - DCC/Sound - HATX #910 (#3)
Detailed Information
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
Models equipped with DCC+Sound will have the new 645E3 20-cylinder prime mover recording by SoundTraxx
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; we are excited to include new features often requested, to the SD45-2 and upcoming Genesis models.
HATX FEATURES:
Windwings per prototype
Nose mounted headlight
Small anticlimber
Standard height Intertial hatch, exhaust stack, fan housings
Black or white numberboards per prototype
Firecracker or Sinclair antenna per prototype
3-or-5 chime horn per prototype
Frame mounted bell
Commonly used in lease service starting in the late 1980s. Prototype railroads would lease locomotives during power shortages and traffic upturns. These particular units were leased to several eastern roads including Grand Trunk Western and CSX.
LOCOMOTIVE FEATURES:
Safety tread on walkways
Fine-scale handrails for scale appearance
Factory applied wire grab irons
Windshield wipers
See through cab windows
Detailed and painted cab interior
Sliding side cab windows
Metal lift rings
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with a 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately painted and printed paint schemes
Body mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
New LEDs for trouble free operation
Bi-directional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18in
Recommended radius: 22in
SOUND EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2
Sound units operate in both DC and DCC
Some functions are limited in DC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in operators manual
PROTOTYPE INFO:
The SD45-2 was an initial success; it was a complete improvement or upgrade as part of EMDs Dash 2 line; it had little to almost absolutely no flaws during the early stages of production and during the models official introduction. It was both popular and compatible with the original SD45 as well, with its large 20-cylinder engine. The SD45-2 lasted somewhat longer than most SD45 units on various owners rosters.
SD45-2 - DCC/Sound - CSX (Solid Grey) #8951
Detailed Information
NEW FEATURES:
•All-new LED lighting
•Rubber MU hoses for durability
•Models equipped with DCC+Sound will have the new 645E3 20-cylinder prime mover recording by SoundTraxx
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; we are excited to include new features often requested, to the SD45-2 and upcoming Genesis models.
CSX FEATURES:
•EMD large style snow plow
•Firecracker antenna
•Leslie RS5L horn air horn
•Nose mounted headlight
•Small anticlimber
•Chickenwire radiator grilles
LOCOMOTIVE FEATURES:
•Safety tread on walkways
•Fine-scale handrails for scale appearance
•Factory applied wire grab irons
•Windshield wipers
•See through cab windows
•Detailed and painted cab interior
•Sliding side cab windows
•Metal lift rings
•Fully-assembled and ready-to-run
•DCC-ready features Quick Plug plug-and-play technology with a 21-pin NEM connector
•Scaled from prototype resources including drawings, photographs, and more
•Accurately painted and printed paint schemes
•Body mounted McHenry operating scale knuckle couplers
•Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
•All-wheel drive with precision gears for smooth and quiet operation
•All-wheel electrical pickup provides reliable current flow
•Wheels with RP25 contours operate on all popular brands of track
•New LEDs for trouble free operation
•Bi-directional constant lighting so headlight brightness remains constant
•Heavy die-cast frame for greater traction and more pulling power
•Packaging securely holds for the model for safe storage
•Minimum radius: 18in
•Recommended radius: 22in
SOUND EQUIPPED MODELS ALSO FEATURE:
•Onboard DCC decoder with SoundTraxx Tsunami2
•Sound units operate in both DC and DCC
•Some functions are limited in DC
•Engine, horn, and bell sounds work in DC
•All functions NMRA compatible in DCC mode
•Slow speed control
•Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
•Many functions can be altered via Configuration Value (CV) changes
•CV chart included in operators manual
PROTOTYPE INFO:
The SD45-2 was an initial success; it was a complete improvement or upgrade as part of EMDs Dash 2 line; it had little to almost absolutely no flaws during the early stages of production and during the models official introduction. It was both popular and compatible with the original SD45 as well, with its large 20-cylinder engine. The SD45-2 lasted somewhat longer than most SD45 units on various owners rosters.
1956 Chevy 210 Four Door Sedan - Unpainted and Resin Cast Kit
20Ft Corrugated Containers with Corrugated Doors, Mitsui OSK Lines 2pk
MOAU 035542(0) and MOAU 035537(5)
HO 70-Ton 12-Panel Hopper - Southern #74699
Blt.6-66
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
Van Hobbies - HO Brass CNR C-630 - DC/Nonsound - Unpainted - Estate Brass Locomotive
Display picture is accurate to the item being sold.
Pre-owned, but in great condition!
Comes in the original Box!
This brass unit has been left unpainted- fuel tank included in the box.
Please note that this item is final sale.
No refunds or exchanges.
HO Scale Whisker Metal Couplers (w/o Gearboxes) - Short Centerset Shank (25pair)
(Gearboxes not included)
The next evolution of model train couplers starts and ends with the Kadee Whisker series of couplers. The scale size and detail of the #58 coupler has long been popular with model railroaders, so we knew we had to offer a Whisker version. The #153 is a Short Centerset scale sized coupler with smaller head and knuckle for a more prototypical look. The #153 features an even longer-lasting and more reliable design. No more fumbling with centering springs. No more multi-piece assemblies. The #153 Whisker coupler is a true drop-in coupler. Use Kadee Whisker couplers in your next model and enjoy the most reliable and smooth coupling experience you have ever had.
The #153 is interchangeable with the #23, #33, #143, and most manufacturers Short Centerset OEM knuckle couplers. For a #33 equivalent use the #153 in a #252 Gearbox.
Package Includes:
(25) Pair #153 Scale Whisker Metal Couplers - Short Centerset Shank
(10) Spare #625 Knuckle Springs
HO RTR 60Ft Flatcar - Union Pacific (3pkg)
MODEL FEATURES:
Separately applied end details and brake wheel
33inch machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Decorated models fully-assembled and ready to run out of the box
Minimum radius: 18inch
HO EMD GP40 Mother and Slug - DCC & Sound - MKT (Green & Yellow) #226, 501
1982+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Slug is fully powered! Motor tucked into frame and body
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO Village Pizza - Kit
Product Information
Village Pizza is part of the selection of Walthers Cornerstone brick storefront building kits patterned after those youll find in towns across the continent.
Main Street hasnt changed much over the years and brick structures like this pizza place are built to last. Buildings tell a lot about your layout, especially in a business district adorned with colorful signs that set the time and place. Village Pizza combines a restaurant on the first floor and apartments or offices on the second floor - typical of buildings constructed in the late 1800s through the 1930s and still in use today. Personalize your model with paint from your dealer, and add the finishing touch with the colorful signs in this easy-to-build kit.
The finished kit measures: 3-1/8 x 5-1/2 x 4-3/4inch (7.9 x 13.9 x 12cm)
Check out the entire selection of Cornerstone businesses.
Two story brick corner structure
Fits 1880s to present
Perfect for small town or big city
Use with other Cornerstone commercial storefronts (sold separately) to create a business district
Works with Cornerstone Street System
Colorful printed signs, window treatments and awning
Molded in appropriate colors
Dry Transfer Signs - Depot, REA & Advertising
Full-color dry transfers can be applied to a smooth or texture surface such as wood, metal or plastic by positioning the sign in the desired area, rubbing gently on the back and peeling away the carrier sheet. One 4 x 5 inch sheet per package.
5/16 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 5/16 inch
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) #653000
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO ACF PD3500 Flexi Flo Hopper -
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990
Car No. 897868
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO Procor 20,000 Gallon General Purpose Tank Car - Turbo Resources - CGTX / Era: 1976+ - (6 pkg)
20276, 20278, 20281, 20283, 20288, 20291
The Rapido Trains HO scale Procor GP20 Tank Car features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Photo-etched metal walkways
Detailed vent stacks, loading hatches, air tanks and braking equipment
Metal knuckle couplers
Early style features 70-ton trucks with 33in wheels and an exposed drain valve
Late style features 100-ton trucks with 36in wheels and a reinforced drain valve housing
HO RTR ACF 4650 3-Bay Hopper - Norfolk & Western #171183
Date: NEW 6-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
N Scale GP-9 w/Turbo Tubes - Silver Standard DC - Grand Trunk GT #4921
Features:
Powered low friction drive
Blackened metal wheels
Dual brass flywheels
Directional lighting
Golden-white LEDs
AccuMate couplers
Atlas Master Series Silver Additional Features:
Atlas Silver Sound Ready models are equipped with a speaker for easy conversion to sound with the addition of a decoder.
AccuMate couplers are made under license from AccuRail, Inc
Tangent Scale Models HO V3 PS4750 Covered Hopper CNW Ex-ROCK Blue w/ White CNW
CNW Ex- ROCK -Blue w/ White CNW- V3 is a second banditized ROCK scheme variation. After the ROCK bankruptcy, CNW and other railroads assumed ownership of former ROCK freight cars, including this series of PS4750s. We have represented some aging of the car body color with faded blue paint. For this version, the large R and The Rock and the reporting mark/number have been painted out. A black CNW herald has been added to the upper right corner of the car, just like the prototype.
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
HO Greenville 86Ft Quad Plug Door Box Car - Building America Repaint 2011+ - Union Pacific (SP) #616549
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Union Pacific (SP) -Building America Repaint 2011+- answers a frequently-requested paint scheme for the modern modelers! Who cannot love the classy Union Pacific graphics? In 1970, Southern Pacific (SP) ordered two different lots of Greenville quad door auto parts box cars (yes, we will offer original SP down the road). While some of these lasted in original SP paint into the 2010s, many of them saw Building America paint in a program fashion. These cars represent the SP cars after painting, and they retain their SP reporting marks but include a full complement of UP stenciling styles, UP shield, and UP Building America graphics. The underframe features accurate Center-of-Car Cushioning details with extended draft gear and this replica rides on 70-Ton Barber S-2 Roller Bearing Trucks with 33inch wheels, rotating -Timken- caps and truck mounted brake details. Each individual car features number-specific data, delineator, and tack board placement. In other words, each is a -little- different! Collect all four while you can, and enjoy this modern-era offering!
HO 40ft ACF Modernized Welded Boxcar - Southern #23059
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO SD70 - DCC & Sound - Illinois Central #1010
Detailed Information
IC FEATURES:
As-delivered IC scheme in 1995.
P5 horn
Spare knuckle brackets on rear pilot
Spare knuckle basket on walkway
Sinclair and can-type antennas
Cab Vent
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Code 83 Snap Track - 22 Inches Radius Curve
Brown Tie - 22.5 degrees per sections
Acrylic Flat Colors - Flat Flesh - 3/4oz (23mL) Bottle
XF-15
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO Scale SD30C-ECO - DC/DCC Ready - Canadian Pacific #5004
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
N Scale ACF 4600 3-Bay Covered Hopper - DT&I #10333
MODEL FEATURES:
- Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
- Round or trough hatches
- Photo-etched metal roofwalk
- Separately applied wire grab irons and stirrup steps
- Detailed outlets
- Multiple roadnumbers
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed
- Highly-detailed, injection molded body
- Separately applied brake wheel
- Screw mounted trucks
- 100-ton trucks with 36 inch machined metal wheels
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Minimum radius: 9-3/4 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
Coping Saw Replacement Blade - 24 TPI (4 pkg)
These Zona Coping Saw Replacement Blades are 6-1/2inch Long, .100inch Wide, .018inch Kerf x 24 teeth per inch giving a fine finish. They fit coping saw 795-35670.
HO Scenic Accents - Bystanders (6pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
A set of two women and four men - the men and one woman stand and one woman sits.
Airbrush Intermediate Set Double Action
This kit combines the Paasche double action VL-3AS, D500SR compressor and AC-7 cleaning kit.
VL airbrush with size 3 head, size 1 & 5 heads, 1 oz bottle assembly, 1/4oz metal cup, 1oz storage bottle, 6ft braided hose, 1/8inchBSP adapter, hanger, wrench and lessons book.
Specs:
Part Number: VL-3AS
Type: Double action, Internal mix, Siphon feed
Head Size: Size 1 (.55mm), Size 3 (.74mm), Size 5 (1.05mm)
Fluid Packing: PTFE - Can spray solvent or water based fluids
Air Volume: 20 PSI .5 CFM
Air Pressure: 20-75 PSI
Air Inlet: 1/4-20 Thread (Paasche thread) - adapters available
Bottle size: 1/4oz to 8oz bottles available
Spray Pattern: 1/32 to 1-1/2
Weight: 1.1 Lbs
Finish: Chrome plated body
The D500SR airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The D500SR is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses.
The compressor features include:
1/5 HP piston compressor
Regulator & moisture trap
Delivers 1-35 PSI depending on airbrush being used
Standard Paasche 1/4NPT hose fitting
1/8 BPS hose adaptor for competitor hoses
Auto shutoff feature
Carrying handle
Quiet: noise level is 47 Dbs
7 piece airbrush cleaning kit. Can be used to clean any airbrush.
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) #653135
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
60 Ft Water/Oil tank flat top kit
60 foot tall by 24 foot in diameter riveted steel tank with flat top.
#1715 Stainless Steel Screw Assortment 4 of each
Help avoid down time and work stoppage by making sure the proper mounting hardware is available at all times. Each screw assortment contains 8 of the most popular screw sizes (4 each) for most of your coupler mounting needs.
4 Each
0-48 x 1/8inch Metal
0-48 x 3/16inch Metal
0-48 x 1/4inch Metal
0-48 x 3/8inch Metal
0-80 x 1/8inch Stainless Steel
0-80 x 1/4inch Stainless Steel
0-80 x 3/8inch Stainless Steel
0-80 x 1/2inch Stainless Steel
HO Illuminated Switch Stand - Assembled
Finished in black with red and green lenses, red and white target blades. Illuminated with 1.5V bulb, rotates 360 degrees.
HO Bettendorf 50 Ton Truck With Brass Wheelset - 1 Pair
Highly detailed truck sideframes
Nickel silver plated brass insulated wheelsets
These wheels follow NMRA RP-25 Standards.
One wheel is insulated from the all-metal axle.
The entire wheelset is non-magnetic.
The axle length is approximately 1.006" (+- .004in).
Scene Master Trackside Weeds Kit
Love them or hate them, this SceneMaster Trackside Weed kit makes it easy to bring realistic detail to any setting! Perfect alongside HO railroad and highway rights of way, theyre also a must for overgrown yards, gardens and more. The kit features:
Installs in minutes in new or existing scenery
Parts molded in realistic colors
Easy assembly with illustrated step-by-step instructions
Super value set includes 125 pesky plants:
3 Overgrown Grass mat sections
20 Dandelions (with white and yellow flowers)
6 Leafy Tendrils/Creepers
24 Ivy plants
40 Cornstalks
32 Broadleaf Weeds
HO EMD SW9 - DCC & Sound - Illinois Central (IC Black Scheme) #481
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Illinois Central:
Delivered in 1951
Road style end rails with drop steps
Short side handrails
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO Greenville 86Ft Double Plug Door Box Car - Canadian National (Delivery 10-1978) #795117
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Canadian National (CN) -Delivery 10-1978- is our first Greenville 86Ft auto parts offering in Canadian National. The CN rostered a few orders of Greenville cars, but this order for 80 cars in 1978 was the largest. The 1978 cars have body-mounted brake gear and End-of-Car Cushioning components, along with that signature 5-grab iron body that makes them stand out from any other style of 86Ft Greenville box car. Some of these cars have lasted in their original CNA brown delivery scheme for a long time - we can verify an example to at least 2016! We know this scheme is a big deal - and we thank our CN fans for their patience. We wanted to release it with the correct body grab iron details.
HO 57ft Mechanical Reefer - Wisconsin Central #10010
FEATURES:
- One time run of these road numbers, order now - limited quantity available
- Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
- Keystone or Hydra-Cushion underframe detail as appropriate
- Short ladders and low hand brakes
- 9ft Youngstown plug door with separate latch bars
- Authentic Stanray peaked, ribbed roof with capped exhaust stack
- Detailed underbody with brake gear and fuel tanks
- 70-ton roller bearing trucks
- Correct 33 inch RP-25 turned-metal wheelsets
- Proto MAX(TM) metal knuckle couplers
10Ft 6In Modified 1937 AAR Boxcar - Gulf, Mobile & Ohio #52549
SoundTraxx - Wire Harness - ECO-100/TSU-1100 8-Pin Power
Replacement 8-wire power harness for all TSU-1100 or ECO-100 Digital Sound Decoders.
HO High-Level Switch Stand Kit - Rigid .190inch Travel w/Selectable End Fittings
Product Information
Easy Manual Turnout Control Without Touching Your Rails
Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw. Molded on pin for direct mounting. All 100 series (Rigid) stands require modelers to fabricate a spring connecting link between the stand and the turnout. All 200 series units (Sprung) have internal springs so they can be connected directly to the turnout throwbar. Measurements indicate the maximum amount of side-to-side travel when the lever is thrown.
Operating high level switch stand is based on prototypes used by many roads. Working parts are Delrin. Also includes six targets, nonworking lantern and square diamond made of ABS plastic. Manual target can be adapted to work from an electric switch machine (sold separately) below the benchwork. .190inch travel. Kits now include a shim to raise the stand to tie level, along with five different fittings for use with most turnouts, including Atlas, Roco, Peco, Micro Engineering and Shinohara.
Photos shows Lantern with red & green jewels, sold separately.
Use 947-1196 Brass Wood Screws pkg(24) #1; 3/8 x .070inch to mount turnout to table.
Use 947-1195 Brass Wood Screws pkg(24) #0; 3/8 x .060inch to mount turnout to table.
HO Northern Light & Power Powerhouse - Kit
Product Information
Generate revenue for your steam or diesel-era railroad with the Walthers Cornerstone Northern Light and Power powerhouse. This detailed, easy-to-build model is similar to power generating stations operated by utility companies, private industries and institutions, as well as streetcar or interurban lines. The kit features a brick main building, large smokestack, coal dump pit, separate doors, roof with vent details, tall windows and clear window glazing. Northern Light and Power also includes decal signs and complete instructions. Northern Light and Power is just one of a wide variety of Cornerstone HO Scale industrial buildings.
Easy-to-build plastic kit
Use as a stand-alone utility or as part of a larger industrial complex
Fits 1900 and later modeling eras
Tall brick smokestack
Molded in appropriate colors
As shown Northern Light and Power measures: 12-3/4 x 6-1/2 x 7inch (31.8 x 16.2 x 17.5cm)
HO GP38-2 - DCC & Sound - Missouri Kansas Texas (MKT) #320
Detailed Information
MKT FEATURES:
Offered by popular demand
Newer -simplified- scheme
Mid-Phase body
Leslie 3-chime horn
3200 gallon fuel tank
88inch nose
Correct paint scheme and colors
Blomberg B trucks
Xenon clear strobe (light effect with DCC)
To try and keep painting costs down, MKT adopted a more simple version of this scheme by eliminating the yellow stripes on the top of the cab.
ROAD NUMBER SPECIFIC FEATURES:
#313
Non-dynamic
Yellow safety frame stripes
MU catches on both front and rear pilots
Road number on sides of long hood
#318
Extended range dynamic brakes
No frame stripes
MU catches on rear pilot
Road number on sides of cab
#320
Extended range dynamic brakes
Yellow safety frame stripes
MU catches on rear pilot
Road number on sides of cab
GP38-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - Santa Fe (ATSF) #350026
Product Information
Serve a wide range of HO industries with the 37ft 2980 Cubic-Foot Two-Bay Covered Hoppers from WalthersMainline. Based on prototypes introduced in the late 1980s, they can be found hauling cement, fracking sand, roofing granules and similar loads. Features of the layout-ready models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from late 1980s to the present
Separately molded and applied hopper gates
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
HO Trenton Works 6348 CN Boxcar - Canadian National (As Delivered) #598098
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Orange) #505216
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - BLUX #1004
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Indiana Harbor Belt #819006
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Bachmann - HO Transfer Caboose - Missouri Pacific - #13061
Features include:
new and existing tooling
highly detailed painted bodies with precision graphics
magnetically operated E-Z Mate? Mark II couplers
blackened machined metal wheels with RP25 contours
Spray Can - Titanium Gold (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO EMD GP40R - DCC Ready - Illinois Central #3121
Mid 90s
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
N Scale GSI 48Ft Bulkhead Flat Car - BC Rail #51726
Features:
Die-cast body
Detailed deck
Detailed bulkhead lattices
Read-to-run
Superb paint & Lettering
HO 60ft NSC 5150 3-Bay Covered Hopper - Archer-Daniels-Midland (ADMX) #52293
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO NSC 60ft Ingot Flat Car - HPJX National Steel Car
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
N Scale Rerailer Ramp & UniJoiner Removal Tool
N Scale Automatic 3-Color Signal
The signal changes from green to red as the engine reaches the detector position.
A built-in timer then changes the signal to yellow and then back to green.
(For Analog DC applications only. Not DCC compatible.)
ADMX #52314
(gray, blue; Molecule Logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. They have worn a wide range of colorful paint and lettering schemes over the years, 59ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59ft Cylindrical Hoppers feature:
Limited Edition - one time run of these roadnumbers!
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36In turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers
N Scale Straight Roadbed Bumper Track - Style A (2pcs)
(Concrete box style)
2-7/16 inches (62mm)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO CP Rail - 48ft Containers & Tractors, 1990-Present - Waterslide Decal
HO NSC 64 Ft 6000 Cubic Gondola HS - IMRX #2288
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO ACF 3-Bay Cylindrical Hopper - Cancarb (ACFX) #60245
PROTOTYPE INFORMATION:
Introduced in 1961 by ACF to haul sand, clay, salt, grain and bulk plastics, the Cylindrical Hopper was the first commercially successful
tank-type covered hopper car design. A few of the more than 4,000 cars of this type built through 1966 can still be seen in service today across the United States.
MASTER MODEL FEATURES:
See-through roof walks
Blackened metal wheels
Free-rolling 100-ton trucks
Detailed brake gear
AccuMate couplers
Fine painting and printing
HO RTR ACF 2970 Covered Hopper - Winchester and Western (W&W) #4525
Detailed Information
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons and stirrup steps
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple road numbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
HO 60ft Flat Car - Southern #152123
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO PC&F 5241 CUFT - Boxcar - Saratoga & North Creek (SNC) - Single Car #3274
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Tangent Scale Models HO PS4750 Covered Hopper ROCK -Delivery Blue 6-1978
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ROCK -Delivery Blue 6-1978- is available in the Blue Original 1978 scheme. Our -R- black and white logo and blue color is stunningly executed, check it out for yourself. ROCK lettering done right is something to behold, with accurate data stencil breaks and careful duplication of ROCKs data style. This is Tangent-accurate hand-drawn artwork. We have also matched the 1978 ROCK details including body-mounted brake center sill linkage, Miner outlet gates, a Universal hand brake and matching Universal brake wheel.
ESU 51967 Adapter Board for LokSound 3.5 or LokSound v3.0 w/21 pin
The 21 MTC adapter board is suitable for digitising a loco without interface and for the case you do not intend to wire the decoder freely.
The adapter board offers a possibility for installing a decoder with 21MTC connector. This decoder is simply plugged onto the board. At the other end 21 annular rings make a clean wiring of your loco possible. A neat conversion can be made via this adapter board and enables you to use all additional functions of the 21MTC connector (e.g. loud speaker outputs).
HO SD70ACe - DCC & Sound - Montana Rail Link (MRL) #4308
Overview
MRL FEATURES:
Lit Number Boards
Truck lights
Nose mounted headlight
Early Brake wheel
As-delivered scheme
In 2005, MRL ordered 16 SD70ACes from EMD to help replace the aging fleet of their older EMD power. They were painted at CEECO in Tacoma WA and placed into service shortly after.
SD70ACE SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Athearn HO RTR 85ft TOFC Flat, RI #93211
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Detailed trailer hitches
Factory installed wire grab irons
Metal underframe for correct rail height and optimum performance
Machined RP25 profile 33in metal wheels
Swing mount coupler boxes
PROTOTYPE HISTORY:
The 85ft flatcar was introduced in the 1960s to accommodate the latest 40ft trailers that were just being introduced on the nations highways. Each flatcar was set up to transport two of the trailers. Subsequently, these dedicated TOFC (Trailer On Flat Car) flatcars became the defacto standard for intermodal service during this era.
Specifications
COUPLER STYLE: McHenry Scale Knuckle
HO 40ft ACF Modernized Welded Boxcar - Detroit & Mackinac #3125
FEATURES:
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Greenville 86ft Double Plug Door Box Car - Wabash #55070
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: August 2021
Wabash -Original 1964- 1965+ Era is one of the many -classic- 1960s schemes seen on these cars, and represents one of the last schemes the railroad wore before being merged into the Norfolk and Western! This rolling billboard features Wabashs classy dark blue scheme with large Wabash lettering, and then undoubtedly the largest Wabash flag applied to any rolling stock, adorned with the -Follow the Flag- logo. Pure class. These cars were delivered in 1964 with full running boards but were soon modified in 1965. These significant modifications included the removal of the roof running board, the lowering of the brake wheel housing and removal of high grab irons and end ladders. Our Wabash model replicates this 1965+ look with exact features: an accurate 1964-built body, bolt -remnants- on the sides and ends of the model, and a roof with the old bolt locations of the running board supports! The features go on and on, including an accurate -lowered- Miner hand brake, 1965 replacement full-width Apex crossover platforms, 70T trucks with 33inch wheels, truck-mounted brake details and rotating Brenco-6 roller bearing caps. This stunning model is available in four numbers. (Please note there is no SKU 1/2 for this production).
1946 Murty Bros. Riggers Lowbed Dock Truck - Unpainted and Resin Cast Kit
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.06 (10pcs pkg)
HO Cut Stone Sloped Tunnel Abutment (2pk)
DIMENSIONS:
4-1/2 x 3-21/32 inches
HO Value Line RTR - 13 Panel Coalporter - Conrail #503012
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO RTR Thrall 5-Unit Rebuilt 40Ft Well Car - Trailer-Train DTTX #748273 A-E
(yellow, Large Red Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft on both single and five-unit cars. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers - limited quantiuty, order now!
100- and 70-ton roller bearing trucks
Correct 36inch and 33inch RP-25 turned metal wheelsets
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
Proto MAX(TM) metal knuckle couplers
Union Pacific 903145 (silver)
This Bachmann Silver Series(R) Scale Test Weight Car is a model of typical the diminutive cars used to calibrate track scales used for measuring car and load weights. They were used to check axle load limits and to determine the billing of customers for cargo loads. Scale Test Car features a die-cast metal body with realistic decoration, metal wheels and body-mounted E-Z Mate(R) magnetic knuckle couplers.
N Scale Arch Bar Trucks w/short ext. couplers (1pair)
Rock Molds Wind Rock
Highly detailed, flexible and durable rock molds can be used to cast small boulders, rock outcroppings, top rocks for fields and creeks, or make entire rock faces by combining castings produced with these molds.
3/16 inch OD Round Aluminum Tube - 0.049inch Thick x 12inch Long
Round Aluminum Tube (1 pc)
Outside Diameter: 3/16 inch
Mainline with 9 inch Tie Strip (50pkg)
These self-gauging tie strips allow trouble-free, museum-grade detail for almost any skill level of modeler. These CVT ties allow for Code 83, 70 and 55 rail with no need for a track gauge if using RP25 wheelsets gauged to NMRA standards.
HO Scenic Accent Figures - Pedestrians Going Places (6 pkg)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism.
60 ft NSC 5150 3-bay Covered Hopper - Union Pacific #90567
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. They have worn a wide range of colorful paint and lettering schemes over the years, 59ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59ft Cylindrical Hoppers feature:
Limited Edition - one time run of these roadnumbers!
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36In turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO - Leslie Air Horn RS5R24
HO EMD SD9 - DCC & Sound - Chicago, Burlington & Quincy #834
-white frame
Chicago, Burlington & Quincy
- Phase IV (First time for a plastic model!)
- Higher short hood with a corresponding cab height
- Cornered-off section on the long hood behind the cab
- Two 48inch radiator fans as opposed to the normal (four) 36inch fans
- Conduit pipes were removed from the top of the radiator
- No ladders on the short hood end
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Juneco HO S-3 4.75 2 Lt Ground Signal w/12V bulbs
HO F30A 50Ft Flat Car MOW w/Deck Rails - Conrail (CR MOW) #58709
This car does NOT include sleeper or camp vans
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
20Ft Corrugated Containers with Corrugated Doors, Ocean Network Express 2pk
#03565(9), 035713(0)
9/32 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 9/32 inch
BSI-111 Maxi-Cure Extra Thick Glue 1/2 oz
HO EMD SD9 - DCC & Sound - Burlington Northern #6237
Burlington Northern
- Former CBQ units (Phase IV, first time for a plastic model!)
- Correct 5-step, BN walkway
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO 50ft Evans Cushion Coil Car - Norfolk & Western #169976
Designed to speed loading and unloading while protecting large steel coils in transit, the Walthers Proto(R) 50ft Evans Cushion Coil Car is a great way to add steel traffic to any HO layout. These cars feature updated tooling with removable angled, round or glass fiber hoods.
Additional features include:
- One time run of these road numbers, limited quantity available - order now!
- Based on cars in service 1970s to early 2000s
- Prototypes carry larger steel coils used to make automobiles, appliances and food packaging
- Matching, removable hoods in angled, round and glass fiber styles with lifting and stacking brackets
- Fully assembled with etched metal walkways, grab irons, underframe cushioning device, separate brake gear, and more!
- Detailed body with V-shaped load cradle and separate restraints
- Heavy die-cast metal frame for enhanced performance
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Detail your new coil cars in minutes with the Cornerstone Steel Coil Load (#933-1499), sold separately)
- Great for use with Walthers Steel and Auto Industry Series!
HO EMD SW1200 - DCC/Sound - Chicago, Rock Island & Pacific #924
(Flexicoil Trucks)
Note: Only #934 is decorated in the red speed lettering scheme!
The HO Scale Rapido SW1200 features:
- Designed from original blueprints and field measurements
- Heavy diecast frame, chassis and gearboxes for superior pulling power
- Rapidos renowned silky smooth-running drive system
- Working cab interior light and inspection lights
- Fully detailed Type A or Flexicoil trucks, as appropriate
- Full cab interior with working cab interior light and non-working fire extinguisher and fridge (where appropriate)
- Working headlights and illuminated number boards at both ends
- Some models have a rotary beacon or flasher/strobe as appropriate
- Separate handrails, including crash bars inside the cab
- Multiple exhaust stack and battery box door styles
- With or without working drop steps, as appropriate
- Incredible underbody piping and conduit detail - a Rapido hallmark!
- DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings from a 567 prime mover
HO EMD GP35 - Paragon4 Sound/DC/DCC - C&O #3529
(Yellow Nose)
Ubiquitous on American railroads, the EMD GP35 is a 4-axle diesel-electric locomotive built by EMD and subsequently General Motors Diesel in the mid 1960s. Over 1300 of these locomotives were produced, and they were operated by virtually every major railroad in the United States. Additionally 26 units were built for Canadian railroads and another 57 units were built for Mexican railroads. These freight locomotives were powered by EMD 567D3A 16-cylinder engines that generated 2500 horsepower.
List of individually controllable lights in our EMD GP35 models:
- Headlight
- Rear Light
- Mars Light (SP only)
- Numberboard Lights (Front & Rear)
- Front Classification Lights
- Rear Classification Lights
- Emergency Light (SP only)
- Rotary Beacon (where appropriate)
- Ditch Lights (where appropriate)
- Cab Light
Road-specific detail options that are prototypically accurate for each road name:
- Truck sideframes
- Dynamic brake hatch
- Open & closed type fans
- Short hood detail arrangement
- Long hood end detail arrangement
- High short hood option where accurate
- Horn type and location
- Bell location
- Multiple front pilot types
- Multiple rear pilot types
- Accurate cut lever types
- MU receptacle arrangement
- Multiple sunshade options
- Antenna type and location
- Wind deflector type
- Rooftop AC for ATSF type
- Rotary beacon type and location
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up
- ABS Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, Wipers, and Etched Metal Grills
- Prototypical Light Operation - accurate for each paint scheme
- Prototypically Accurate Sounds for the EMD GP35 Diesel Locomotive
- Metal Kadee-compatible Couplers (2)
- Will Operate on Code 70, Code 83, and Code 100 Rail
- Minimum Operating Radius: 18 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
AXIAL Yeti Jr CanAm Maverick RTR
1/18 scale radio control side-by-side all-terrain Vehicle primed for RC rock racing adventure right out of the box and includes everything you need
Features adjustable Coilover oil-filled shocks, metal gear servo, 37T 380 waterproof brushed motor, and hinged body mount for easy electronics access
Independent front suspension with machined aluminum cvds provide better control and high-speed Stability for off-road racing on rough terrain
Three-link rear suspension with floating solid rear axle provides sway-bar like support for improved a
Includes: 1/18 Yeti Jr Can-Am Maverick RC RTR |spectrum 2.4GHz STX2 radio system | 7.2V 6C 1300mAh NiMH battery | USB charger | 4 x AA alkaline
PRLX ex Warbonnet #236
Expected in November 2020
Locomotive features:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Sound equipped models also feature:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PRLX features:
All PRLX locomotives are Primed for Grime with road numberspecific patches and fading
Many of BNSFs SD75Ms were in storage by 2014-2015. The 20plus year old units were definately past their prime at this point, however, most of them still had a future. Norfolk Southern bought a total of seven units, to become NS 2800-2806. In addition, Progress Rail Leasing (PRLX) bought a large group of the units. They arrived to PRLX wearing several paint schemes, including the Santa Fe Warbonnet as well as BNSFs Heritage II paint. The units were hastily patched and placed into service, as of this writing they are leased to CN and KCS, but future leasing assignments are likely.
Primed for grime models feature:
Duplicated look and feel of -In Service- equipment, -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per roadnumber matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
Foliage - Light Green - Bag (72 in2)
Foliage is excellent for making trees, vines, weeds, bushes, hedges, or any low growth. Simply stretch the sheet of foliage for a thin, lacy application. Use for any scale. Available in four colors and two fall blends. Attach to layout with Scenic Cement (TM). To create quick and economical tree masses on your layout, stretch foliage to desired density, then roll into a loose ball. Stretch the ball into a conical shape for variation. Attach to hillsides with Scenic Glue(TM). Purchase the The Complete Guide to Model Scenery for additional information about how to use the Landscape System.
Tru Color Paint 157 - Acrylic -SOO Off White 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO G2 SD80MAC - DCC Ready - Conrail #4129
Detailed Information
CR FEATURES:
As-delivered paint scheme
Front and rear operating red marker lights
Leslie 3-chime horn
Small EMD front plow
Pilot mounted front ditch lights
In 1995, Conrail placed an order for 30 SD80MACs, being the sole original purchaser. They were painted like the then-recently delivered SD70MACs. This would end up being the last new locomotive order CR would place before they were split up between CSX and NS in 1999.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
HO PS-2-4427 High Side Covered Hopper - TLDX Delivery Yellow Lease 3-1967 #6873
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
TLDX Delivery Yellow Lease 3-1967 wears the popular and common version of the TLDX private leasing yellow. The Pullman leasing lettering is simple, with accurate TLDX reporting marks and data. The side placard adds a bit of pop to this scheme, advertising Pullmans Transport Leasing Division to shippers. These TLDX cars were built in 1967, and that translates to earlier Pullman features like square stirrup steps, center sill supports between the bays, solid end running board supports, Miner gravity gates and ribbed-style roof hatches. The model is equipped with 100-ton Barber S-2 trucks with separately applied brake beams along with rotating Timken caps. This relevant lease scheme is perfect for the 1960s-1980s.
1:87 CAT 12M3 Motor Grader
Details:
1:87, Wheel Loader
Dimensions:
4 x 1½ x 1⅝ in
103 x 37 x 42 mm
HO 37ft General American Meat Reefer - Armour #11947
Rapidos 37ft Meat Reefers Feature:
- Complete underbody with all piping
- Super-detailed Barber S-1 trucks
- (Insulated turned blackened metal wheelsets)
- Accurate roof hatches and hardware
- See-through brake platforms
- Separate grabs, ladders and roofwalk
- Accurate paint schemes
- Multiple car numbers per scheme
- Factory-installed Macdonald-Cartier couplers
- Available in singles or multi-packs.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - BLUX #1008
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO GP40-2 - DCC & Sound - ONT #2201
Detailed Information
ONT FEATURES:
Ex-B&M
Corrugated grilles
Non-dynamic hatch
Front and rear ditch lights
Side-mounted hood bell
M3 horn on long hood
Blomberg M trucks
Large fuel tank
Large front anticlimber
Small EMD front plow
Lit number boards and class lights if equipped (effect in DCC)
The Ontario Northland Railway is operated by the Ontario Northland Transportation Commission, part of the government of Ontario, Canada. Purchased in 2005, these ex-BM GP40-2s were repainted into this bright and vibrant scheme. A few kept their nose class lights after rebuild. The units have been seen operating in both freight and passenger service.
ROAD NUMBER SPECIFIC FEATURES:
#2200
Ex BM 311; class lights
#2201
Ex BM 300; removed class lights from nose
#2202
Ex BM 304; nose class lights only
GP40-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Permanent Red Shade 9ml pan (D)
Each PanPastel Color is loaded with the highest quality artists pigments; and is made using a unique manufacturing process requiring minimal binder, resulting in rich, ultra soft and low dust colors. PanPastel Colors can be mixed for an infinite palette of colors.
Each pan contains 9ml (0.30 fl oz) of color. 40percent more than the average pastel stick, and yielding approx. 4-5 times more coverage.
Diesel EMD SD40-2 BC Rail #757
ESU LokSound DCC w/Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation, plus ESU LokSound sound effects. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
HO 1960s & 70s Yard Crewmen (6pk)
Bring scenes along your HO layout to life with this set of six SceneMaster figures! Perfect for period yard scenes or out on the mainline, the set includes six layout-ready figures, molded in realistic poses and finished in authentic colors.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14130
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
RTR 60Ft Gunderson DD HC Box, BNSF/Wedge #761217
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - Nickel Plate Road #560
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
1/2 Inch ScrollSander Sanding Belt (4 pkg)
Zona ScrollSander sanding belts smooth the edges of wood, plastic, metal and composites. Fabric-backed belts have molded polycarbonate ends for mounting on the 795-35750 Adjustable Jewelers Saw, hand fret saws and scroll saws that take 5inch Plain End blades. They work on curves, concave or convex edges. 5-3/8inch long.
1/2inch wide -- 5-3/8inch Long x 1/2inch Wide, 1 Each 80, 120, 180 and 220 Grit.
HO Amtrak NPCU Cabbage - DC/DCC/Sound - Amtrak (Phase III) #90222
The Rapido Trains HO scale Amtrak NPCU -Cabbage- features:
Fully powered, available in silent DC or DC/DCC/Sound
DC models are DCC-ready with a 21-pin plug
Accurate enlarged marker lights, supplementary air reservoirs and K5LA horn
Operating, flashing ditch lights
Operating strobe lights and marker lights
User-controlled operating number boards
Etched-metal radiator grilles and windshield wipers
Separate handrails and grab irons installed at the factory
Rapidos proven 5-pole, skew-wound motor and silky-smooth drive system
Metal, magnetic Macdonald-Cartier Couplers mounted at the correct height
Second release paint schemes include:
Amtrak Phase III
Amtrak Phase V
Amtrak Phase V -Downeaster-
Amtrak -Salutes Our Veterans-
HO RTR 68Ft Bulkhead Flatcar - Illinois Central #978715
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
Maxi I Well Car - 40 Ft- 5 Car Set - Early - K Line/ Rail Bridge #1019
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched walkways
Separately applied brake piping and trainline hoses
Fine ladder detail
Delicate cross-bracing on the floor
Weighted for optimum performance
Razor sharp painting and printing
Prototypically correct 33 In and 38 In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry lower shelf operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18 In
Evergreen Scale Models Opaque White Polystyrene Strips 14in .10x.156 (7pcs pkg)
Safmarine 45 Ft Corrugated Container 3PK Set 2
Numbers
464180
464181
464188
HO Intermediate Height Utility Poles (Wood) (12pk) - Kit
FEATURES:
- New tooling!
- Must-have detail for modeling a modern power grid
- Prototypes support reduced voltage lines between substations and service transformers
- Parts to build 12 poles
- 36 separate insulators - can be drilled out to accept wire (#933-3344, sold separately)
- Realistic wood grain texture and color
- Molded in brown and light gray
- Each pole measures 6-1/4 inches; 45 scale feet tall above surface; mounting pin measures 3/8 inch
- Model a complete power grid with these Cornerstone kits, including the Coal Conveyor with Transfer House (#933-4171), Modern High-Voltage Transmission Towers (#933-3343), Lakeshore Energy Power Plant (#933-4172), Substation (#933-4175), plus SceneMaster Utility Poles (#949-4120) and Utility Company Vehicles (#949-11636 series), each sold separately
Plastruct 90172 Butyrate Half Round Profile 1/4 (4pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
GRAY
OUTSIDE DIAMETER (O.D.)
1/4
6.4mm
INSIDE DIAMETER (I.D.)
1/8
3.2mm
THICKNESS IN INCHES
1/16
THICKNESSS IN MM
1.6mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
HALF ROUND PROFILES Use for the top housing unit of corrugated roll-up doors, large scale gutters and bannister railings, and decorative trim for inside and outside buildings.
HO 53Ft Gunderson Husky-Stack Well Car & Containers - TTX (On Track for a Cure) #654811
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
0.032 inch Thick Aluminum Flat Sheet - 6x12inch
Aluminum Flat Sheet 0.032inch Thick (1 pc)
15 x 30cm
Modern Cold Storage Warehouse
Part of the Cornerstone Modern Industrial Park series -more details on Walthers website
Fits layouts from the 1970s to the present
Easy way to model tip-up concrete panel construction used for all types of trackside warehousing, light and heavy manufacturing plants, strip malls, schools, hotels, offices, apartments and more across North America
Can be built in multiple configurations
Includes alternate doors and windows
Correct height truck and railcar loading docks with weather bellows and or seals
Customize in minutes with molded cut lines, expand with additional kits or build bigger with add-on accessories available separately
Great trackside customer by itself or serving a larger industry
Correct height truck and railcar loading docks with weather bellows and or seals
Industrial electric meters and junction box
Four roof-mounted air conditioners
Modern square security lights - upgrade to working models with Modern Wall Light 3-Pack (#949-4318 sold separately)
Separate doors, windows, entry ramp and stairway
Molded in 5 colors and clear plastic
Main building: 20-1/2 x 9-1/8 x 5-1/4 inches 52 x 23.1 x 13.3cm Cooling Towers: 3-5/16 x 1-13/16 x 3-1/4 inches 8.4 x 4.6 x 8.2cm- Overall height with piping, 4-5/8 inches 11.7cm
Z Scale Heavyweight Business Car - Southern Pacific #106
This modernized heavyweight business car is two-tone grey with white lettering and runs on 6-wheel passenger trucks. Built in the 1920s, SP business car 106 was originally named Shasta. In the late 1950s, Shasta was given the two-tone grey paint scheme, and by late 1964, the business car was renamed Oregon.
Forest Blend
Models low-to-medium ground cover, such as bushes, trees and shrubs, and to make small to medium trees. Available in six colorfast colors that blend with other foliage. Use for any scale. Attach to Tree Armatures with Hob-e-Tac.Attach to layout with Scenic Glue. Purchase the Scenery Manual for additional information about how to use the Landscape System.
Particle size is approximately 1/8inch - 5/16inch (3mm - 7.9mm)
Extension Cable Kit
Use with Extension Wire to create custom lengths of Just Plug Cables. Reach Hubs anywhere on your layout or project.
HO Enterprise 2-Bay Covered Hopper - New York Central (NYC Gothic) #881424
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO 50ft FMC Combo Door Boxcar - Missouri Pacific #367202
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Weighted for optimum performance
- Minimum radius: 18 inches
- Body-mounted, McHenry operating scale knuckle couplers
- Fully assembled and ready for your layout
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO 10 Inch Track Alignment Gauges - Curved - 18 Inch Radius
RibbonRail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking, and joining rail. Track Alignment Gauges are precision machined to NMRA standards and will work on any code of HO Scale rail. Available in many curve radii as well as straight.
HO 1988 G43B Coil Svc. Gondola w/ Coil Racks (Coils Not Included) - Conrail (CR) #601888
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -1988 G43B Coil Svc.- With Coil Racks ? Coils Not Included in the now-classic Conrail red paint. This series represents the former PC-painted G43B series. Conrail maintained the lettering locations that PC did, painting the Conrail reporting marks, road number, and Conrail can opener logo in the same locations PC had stenciled them. The G43B prototype features cushion draft gear, giving the model a distinctive look compared to the other G43 classes. The top chord of the car has a -COIL STEEL LOADING ONLY- stencil to remind customers and railroad officers that the car is equipped with coil racks. Our model has coil racks too, and we sell beautifully executed steel coils for this car separately. We recommend a load of four coils if you want to replicate most prototype loading patterns ? for the size of coil we created. Yes, we did the math. These Conrail coil service gondolas are offered in 12 road numbers and feature details appropriate for these 1969-built cars.
HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #136013
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
N Scale PS 4427 Covered Hopper - The Rock (3pk)
MODEL FEATURES:
- Body-mounted McHenry knuckle spring couplers installed
- Screw mounted trucks for accurate tracking
- Roller bearing trucks
- 36 inch machined metal wheels and RP25 contours
- Operates on Code 55 and 80 rail
- Weighted for optimum performance
- Packed in a jewel box for great display and storage opportunities
- Razor sharp painting and printing
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
1:87 2019 Prevost X345 Greyhound (Go Far) Special Edition!!
FEATURES:
-Diecast metal.
-Pad-printed graphics.
-Very limited edition!
HO C425 PH2 DCC Ready Silver BC Rail
FEATURES:
C425 Phase 2 models include cab with either horizontal or vertical headlights per the prototype
Models include redesigned AAR style truck sideframes with separate brake cylinders and separate bearing cap detail (included when appropriate per the prototype).
Directional lighting w/ golden-white LEDs
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Factory-equipped with AccuMate knuckle couplers
Analog version features NMRA 8 pin plug for DCC
Separately-applied wire grab irons, ladders, and drop steps
Separately-applied marker lenses
Improved painting and printing w/painted handrails
Two painted crew members
Sound Functionality
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
N Scale RTL Turboliner Coach - Amtrak (Phase III Late) #185
The Rapido N Scale Rohr Turboliner features:
Accurately designed using original blueprints and field measurements
Tinted windows, interior details and flicker-free interior lighting
Separate factory installed grab irons
Highly-detailed trucks including third-rail shoes
Working headlights, marker lights and cab-mounted strobe lights
Both Power Cars come with smooth, reliable drive systems for optimal performance
All wheel electrical pickup. Yes, we mean every ... single ... wheel!
Rapido Trains Inc. is pleased to bring speed to the rails with the Amtrak Rohr Turboliner in N Scale!
In the early days of Amtrak, efforts were made to improve passenger services along key corridors. Following the success of the French-built RTG Turboliners in the mid-1970s in the Midwest, Amtrak turned to Rohr Industries in California to build modernized Turboliners for use along the Empire Corridor.
Entering service starting in September 1976, these new RTL Turboliners quickly proved their value, bringing passengers back to the rails. Equipped with third-rail shoes, they operated on electric power through New Yorks Grand Central Terminal (and later Penn Station), switching to gas-turbine power once out of New York City. Painted in Amtraks stunning red, white and blue Phase III paint scheme, they operated on most Empire Corridor services, as well as regular appearances on the Adirondack to and from Montreal in the early years. Occasional equipment needs even put the Turbos on other rare adventures outside their normal call of duty, including the Niagara Rainbow to Detroit via Southwestern Ontario, and the Maple Leaf to Toronto via Niagara Falls.
After nearly 20 years of service under their belts, Amtrak selected one RTL set in 1994 to be rebuilt into what would be called the RTL-II, incorporating several improvements including new turbines, a remodelled interior, a striking new demonstrator paint scheme, in addition to extending the lifespan of the set for several more years. While this set continued in service until 2003, no other RTL-II sets were ever commissioned.
Further redevelopments and improvements of the fleet into the RTL-IIIs was never fully realized, and all were retired from active service in 2004. Conventional equipment has since been utilized on the Empire Corridor services in place of the once mighty Turboliners.
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Illinois Central Gulf Rack / Trailer-Train Flatcar TTBX #965654
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO Modern Concrete Grade Crossing - Kit
DIMENSIONS:
2 Paving Approaches: 5-1/2 x 1 inch each
2 Crossing Centers: 9 x 1/2 inch each
4 Crossing Edges: 9 x 1/4 inch each
1 Double-Track Center Paving: 8-15/16 x 1-1/8 inches
Detail modern HO Scale highways and access roads serving ports, military bases and other heavy industry quickly and easily with the Cornerstone Concrete Grade Crossing kit. Matching the style of prefab concrete crossing panels in use from the 1990s to the present, the kit includes parts to build a 60-scale foot wide crossing, perfect for four-lane highways, and molded cut lines make it easy to customize to fit two-lane streets as well. Molded in realistic concrete gray, authentic details include recessed crane lift bars, tapered ends and a nonskid surface, and the kit also includes matching street approaches and between-track sections. Easily used with Code 70, 83 or 100 tracks, add the SceneMaster Modern Cantilever Grade Crossing Signals (949-4330 2-Lane, or 949-4332 Single Lane) and Grade Crossing Signal Controller (949-4359) each sold separately to complete your new contemporary crossings.
HO 50ft Evans DD Plug Boxcar - HS #11481
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO SP C-40-3 Steel Cupola Caboose - Southern Pacific (Gothic Small - With Roofwalk) #1216
Mid 1960s+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
Ultra Thin Kerf Razor Saw/Mini Mitre Box Combo
- Includes #200 Saw (32 TPI)
HO AutoScenes - Fritzs Front Loader
These three guys are ready to do some heavy lifting around your layout with their equipment!
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - MRRX #4806
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21200
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO Barber S-1 Freight Trucks w/Wheelsets (1 pair)
HO Value Line RTR - 13 Panel Coalporter - Conrail Quality #505364
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO 16,000-Gallon Clay Slurry Tank - WACX #151088
MODEL FEATURES:
- Separately applied fittings nozzle, manway, and small safety valve nozzle
- See-through Photo-etched metal walkways and end platforms
- Full brake plumbing and rigging including brake wheel, air reservoir cylinder, triple valve, brake linkage, trainline, brake rod, large brake
- Printed marking on the sides, ends, and top of the tank body
- Fine scale side ladders
- Placard holders
- Printed marking on the sides, ends, and top of the tank body
- Equipped with McHenry AAR upper/lower shelf couplers
- 36 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Multi-packs feature unique road numbers
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Kaolin, a fine white clay, is produced by the natural chemical weathering of aluminum silicate minerals such as feldspar. Mined in the southeast United States (primarily Georgia and Florida), kaolin is used in the manufacture of ceramics, bricks, light bulbs, cosmetics, medicines and food additives. The largest use is in the manufacturing of paper, especially in creating glossy paper. Kaolin is shipped both as a dry powder in covered hoppers and in tank cars with water as a slurry. In the slurry form the weight of water requires the tank cars be smaller capacity compared to other liquids such as ethanol and LPG. Identical tank cars are also used to haul calcium carbonate slurry, used in the making of lime and cement.
One of the more modern versions of the 16K Gallon Tank car is designed and manufactured by UTLX Manufacturing Inc (formerly Union Tank Car). The car is a 286K (referring to a 286,000 pound gross rail load limit) design with a capacity of approximately 16,000 gallons. The capacity varies slightly between UTLX and Englehard, the operators of the cars. The car is an AAR Plate C clearance car with a 111-inch I.D. tank and an overall length of 44 feet. For a complete bottom unloading the car incorporates a Funnel-Flow design. The cars are lined and kept in dedicated service to avoid cross-contamination.
Acrylic Flat Colors - Dark Copper - 3/4oz (23mL) Bottle
XF-28
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
Code 100 Nickel Silver Flex Track w/ Wood Ties - 36inch pkg(5)
Track is the most important model on your HO layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more! Combining great looks and great performance, each Code 100 item comes fully assembled and features:
Thin profile ties in realistic dark brown with enhanced wood grain detail
Fine profile molded spike and tie plate details on each tie
Spike-mounting holes positioned next to the rail
Molded starter points on underside of ties for center spikes
Custom formulated nickel silver rail for improved electrical conductivity
HO 53ft Railgon Gondola - CSX #484446
(black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Smoke Fluid - Wood Stove- 2oz. Bottle
- 2 Ounce Glass Bottle with Eye Dropper
- Superior Smoke Output
- Quick Dissipation, So It Does Not Fog Up Your Train Room
- Proudly Made in the USA By Train Hobbyists
- Using Only the Purest and Finest Ingredients Under Strict Quality Control
- Known As the World Finest Smoke Fluid
- For Use With Any Scale Steam Locomotives
HO 40Ft PS-1 Boxcar - ATSF (Bx57 Super Chief) #31440
Date: BLT 5-50
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
HO 1988 G43B Coil Svc. Gondola w/ Coil Racks (Coils Not Included) - Conrail (CR) #601878
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -1988 G43B Coil Svc.- With Coil Racks ? Coils Not Included in the now-classic Conrail red paint. This series represents the former PC-painted G43B series. Conrail maintained the lettering locations that PC did, painting the Conrail reporting marks, road number, and Conrail can opener logo in the same locations PC had stenciled them. The G43B prototype features cushion draft gear, giving the model a distinctive look compared to the other G43 classes. The top chord of the car has a -COIL STEEL LOADING ONLY- stencil to remind customers and railroad officers that the car is equipped with coil racks. Our model has coil racks too, and we sell beautifully executed steel coils for this car separately. We recommend a load of four coils if you want to replicate most prototype loading patterns ? for the size of coil we created. Yes, we did the math. These Conrail coil service gondolas are offered in 12 road numbers and feature details appropriate for these 1969-built cars.
3/8 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 3/8 inch
HO Scale Canadian Pacific GMD SD40-2F #9000.
Ready To Run and Detailed. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, operating class lights, window glass, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC, DCC/Sound version features LokSound Select decoder.
Static Grass Flock 57.7 in(3) - Burnt Grass
Use Burnt Grass to model grasses that have been burnt by the sun or fires. It can also be used along roads and in ditches.
Static Grass Flock is a fiber product that models grass and/or weeds. It is available in six colors and can be used alone, or with Fine Turf. Place under trees, along ditches or as forest litter. Attach with Scenic Cement. Fiber length 1 - 3mm.
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
HO 53ft Stoughton Containers - Hub Group, Set #1 (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Separately applied door closure rods
- Each container individually numbered
- Razor sharp printing and painting
HO New Look Bus Winnipeg Transit
Destination Sign:
47 Tanscona Downtown
Detail Variations:
Standee Windows
Partial EIP package
4-window exit door
Late-style engine door
HO International 4900 Open Stake Bed Utility Truck - Assembled - White
Product Information
Fully assembled & painted white - typical of todays heavy trucks operated by railroads, gas, water & power utilities, as well as city, county & state highway departments
Colorful railroad logo decals sized to fit for quick conversion to maintenance-of-way service including BNSF, CN, ATSF, BN, CP Rail, CNW(TM), NS, Chessie, DRGW(TM), MILW, KCS, CR, CSX, SOU, SP(TM) & UP(R)
Licensed replica of popular International trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled and painted
Die-cast metal and plastic parts
This medium-duty truck line was introduced in the late 1980s. Powered by a Navistar DT inline six-cylinder diesel engine capable of up to 350 horsepower, the 4900 series has been a great starting point for a wide range of commercial vehicles, including delivery vans, single- and dual-axle semi tractors, as well as fire apparatus and other government applications.
INTERNATIONAL(R) and other International Truck trademarks are licensed by International Truck Intellectual Property Company, LLC.
Illinois Cereal Mills Cargill ICMX #1014
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. They have worn a wide range of colorful paint and lettering schemes over the years, 59ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59ft Cylindrical Hoppers feature:
Limited Edition - one time run of these roadnumbers!
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36In turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Enterprise 2-Bay Covered Hopper - Penn Central PC (MOW) #32131
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
Morning Sun Books Inc. Chesapeake & Ohio Power In Color Volume 2
Stephen Timko
The massive fleet of over 560 GP7s and ?9s, to the modest purchases of Baldwin and Alco models, including the late first-generation SD18s are featured! Includes the Pere Marquette-ordered EMD BL2s.
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
HO AutoFlood III RD Coal Hopper - PGNX #1111
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
1:87 CAT D11 Track-Type Hydraulic Excavator - New Design Modern Hex
High Line Series
Dimensions:
Imperial : 4-3/4 x 2-3/4 x 2-1/2 in
Features include:
detailed cab interior
authentic Cat Machine Yellow paint
authentic Cat Modern Hex trade dress
realistic tracks
rear platform and powered access ladder details
highly detailed 11U dozer blade
ripper raises and lowers
realistic grab rails and handles
Walthers SceneMaster HO 6077 Photographers 6 pk
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
N scale Privacy Fence - Kit
Easy-to-assemble N Scale Fences from Woodland Scenics feature modular design and include gates, detailed hinges and planter pins for easy installation. Each fence kit includes parts to build 192 scale feet of fencing. Fences for all kinds of scenes are available as part of the line of Woodland Scenics N Scale scenery details.
HO Trinity 3230 Covered Hopper - Lafarge North America (LAFX) #60170
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x10) .022In x .112In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 2 X 10 LUMBER SIZE IN HO SCALE
HO Roof Details - Kit
The Walthers Cornerstone HO scale roof details set includes parts to add realism and interest to the most visible part of your structures. This set of building details includes parts to build the details in the list below. All parts are molded in gray. Use these roof details to add interest and detail to your Cornerstone HO scale industrial buildings.
INCLUDES:
- 1 Large rooftop air conditioner
- 1 Medium rooftop air conditioner
- 1 Small rooftop air conditioner
- 2 Small swamp coolers
- 1 Motorized blower
- 4 Cyclone vents
- 4 Short monitor vents with round base
- 3 Tall monitor vents with flanged stack
- 2 Capped exhaust stacks
- 3 Motorized vents
- 3 Wind direction vent-intakes
- 3 Angled exhaust-Intake ducts
- 4 Short T-style exhaust stacks
- 5 tall smokejacks with caps
HO Code 83 Ladder Track System Turnout - #5e Right Hand Last Ladder
This unique system of five different #5 turnouts allows you to make more compact yards in a given space. The system includes curved diverging track turnouts, which allow a higher ladder track angle, several lapped turnouts and a standard #5 turnout.
Turnouts feature nickel silver rail, brown ties and cast-metal frogs.
HO ET44 Tier 4 - DCC & Sound - Kansas City Southern #5007
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO FGE 57Ft Mechanical Reefer - DCC Ready - SFLC #2480
Detailed Information
57Ft MECHANICAL REEFER FEATURES:
Available with onboard SoundTraxx sound
Scaled from prototype manufacturers drawings and field measurements
Repaints often vary by road number in the size and style of the reporting marks, car numbers and patch shapes
See-through protective screens on the genset end
Detroit Diesel 2-71 Genset visible inside
End wall corrugation visible inside
Inner refrigerator bulkhead
See through end platforms
Two different exhaust stack types: straight pipe with -flapper- or T-shaped -smokejack- per prototype and era
Full underframe detail including Keystone cushioning, air brake reservoir, control valve, brake cylinder, brake plumbing, and fuel tank
Factory applied end ladders and door closure rods
Trainline hoses with silver ends
Three different coupler cut lever styles per prototype
Body-mounted or truck-mounted brakes per prototype
McHenry operating scale knuckle couplers
100-ton roller bearing trucks with rotating bearing caps
Fully-assembled and ready-to-run
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Machined metal wheels with RP25 contours
Weighted for trouble-free operation
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO - 89ft Thrall Bi-Level Auto Carrier - Ready To Run -CSX
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6inch (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
Factory-installed grab irons
Separately-applied ladders and brake equipment
Ultra-smooth rolling metal axles with 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24inch radius is recommended for operation.
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Seaboard Air Line (6pkg)
6-Pack includes the following numbers, all individually packaged: #19703, #19746, #19752, #19761, #19779, #19792
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO 1955 Ford F-100 Pickup - Blue/White
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Rubber tires
HO Hyundai 48ft Exterior Post - BNSF/HUB Group #280069
PROTOTYPE TYPE:
48ft Exterior Post containers were introduced in 1986 and were a common site on nearly all double stack container trains of the later 80s, 90s, and 2000s. These containers were used for domestic freight service and were purchased by numerous railroads and freight operators in large numbers. These containers were a unique design in which the front and side container panels were supported by aluminum channel posts mounted outside of the container box to provide additional capacity space for larger pallet stacks within the container interior. The posts are a simple spotting feature for these styles of containers. Hyundai was one of a handful of manufacturers of exterior post containers, and while nearly-identical in design to one of their competitors, the additional drainage channel on the top of the container at the head end, and full-height end corner posts differentiate this container from its competitors design. Some of these containers served secondary lives for more than one operator, leading to some interesting graphic combinations over their lifespans. Changes to over-the-road length allowances for 53ft containers and trailers brought about the eventual demise of the 48ft container and a majority of them were withdrawn from service during the mid-2000s and beyond, though limited numbers still remain in service today.
FEATURES:
Hyundai Roof Configuration Version:
A unique feature of the Hyundai design was the additional water drainage channel near the front end of the container and the forward vertical framing members that extended the full height of the container. We have modeled the detail that differentiates this container from those of other manufacturers of 48ft exterior post containers.
Sharp And Accurate Paint And Lettering:
Classonemodelworks.com provides accurate paint and lettering taken from photographs of the prototype, and numbering that matches the class numbers for each operator or railroad. Our containers come with the exterior posts already painted to match the aluminum color of the prototype containers and galvanized coloring for the upper and lower structural channels.
Accurately Dimensioned:
These containers have been accurately reproduced from hand-measured field dimensions of the actual containers, right down to every visible detail. Classonemodelorks.com stands for accuracy and we strive to provide that with every model we produce.
Accurate scale Door latching Details:
Classonemodelworks.com believes in providing models that accurately depict the prototype equipment. Keeping that as our core, we are proud to provide highly-detailed cast door locking bars, latching mechanisms, door bumpers and angled bar lifter.
HO SD70M - DCC & Sound - Union Pacific #4454
UP FEATURES:
UP lightning stripe scheme
Early SD70M body
Nathan K-3 horn
Air Dryer
Spare knuckles on rear pilot
Prime air filters
HTCR-II trucks
EMD low plow
Red sill stripe
GPS dome
Small can & Sinclair antennas
-Under Warranty- on cab
Late style fuel tank & breather piping
This release of UP SD70Ms depicts units from the first order, with early (non-flared) SD70M bodies in their as-built appearance. For later-era operations, a consumer-applied GPS dome is included.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Magor 54ft Flat Car - DODX - Navy Scheme (Era: 1975+) #38391
The Rapido Trains HO scale DODX Magor Flatcar features:
FIRST TIME IN PLASTIC!
Drawn from original blueprints, measurements and 3D scans
Fully-detailed underframe including piping and equipment
Correct Buckeye 3-axle trucks with incredible detail
Trucks have friction bearings or retrofitted roller bearings as appropriate
Metal knuckle couplers
Simulated wood deck design
Loads coming soon
HO 85ft General American G85 Flatcar - Union Pacific #53038
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
N Procor 5820 Covered Hopper - UNPX - Procor W/ BF Goodrich #122216
The Rapido Trains N scale Procor 5820 cu ft Covered Hopper features:
Three styles of roof hatches: round, round with ribs and 20 inch vented cover
Two styles of outlet gates: pneumatic and Miner
Etched walkways
Spare hatches included in polybag to let modeler modify for different era
Full end cage details
Accurate paint and lettering
Multiple road numbers available for each scheme
Evergreen Scale Models 9009 - .005in Plain Opaque White Polystyrene Sheet (3 Sheets)
6in x 12in SHEET
HO Kenworth T680 Day-Cab Tractor with Cryogenic Tank Trailer
HO Value Line RTR - 13 Panel Coalporter - Conrail Quality #505643
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO FGE 57Ft Mechanical Reefer - DCC Ready - SLSF #333033
Detailed Information
57Ft MECHANICAL REEFER FEATURES:
Available with onboard SoundTraxx sound
Scaled from prototype manufacturers drawings and field measurements
Repaints often vary by road number in the size and style of the reporting marks, car numbers and patch shapes
See-through protective screens on the genset end
Detroit Diesel 2-71 Genset visible inside
End wall corrugation visible inside
Inner refrigerator bulkhead
See through end platforms
Two different exhaust stack types: straight pipe with -flapper- or T-shaped -smokejack- per prototype and era
Full underframe detail including Keystone cushioning, air brake reservoir, control valve, brake cylinder, brake plumbing, and fuel tank
Factory applied end ladders and door closure rods
Trainline hoses with silver ends
Three different coupler cut lever styles per prototype
Body-mounted or truck-mounted brakes per prototype
McHenry operating scale knuckle couplers
100-ton roller bearing trucks with rotating bearing caps
Fully-assembled and ready-to-run
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Machined metal wheels with RP25 contours
Weighted for trouble-free operation
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO VIA HEP2 Coach: VIA Rail - HEP2 Club Scheme: #4000
VIA Rail HEP2 Club Scheme (1996 to Present)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
HO EMD FT Booster - DC/Silent - AT&SF (Freight Scheme) Unnumbered
Santa Fes FTs were equipped with couplers at both ends of each unit. This allowed the Santa Fe to run
FTs in A+B+B (or even A+B+B+B!) sets. Our individual coupler-equipped FT B-units allow modelers
to easily recreate these lash ups for the first time!
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
Plastruct 91361 Tinted Mirrored Sheet - Bronze (2pcs pkg)
100x300x1mm
HO 53ft Jindo Container - Ferromex Set #2 (3pk)
(#232603, 232618, 232624) (GRAY/RED)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting
HO ET44 Tier 4 - DCC Equipped - CN Heritage/Illinois Central #3008
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
Modern Block Signal Single-head - 3-Aspect LED Block Signal - Assembled Left Hand
Features:
- 100% Assembled!
- Operating Signal Head!
- Extremely Fine Detail
- Durable Plastic Construction
- Etched-Metal Handrails & Walkways!
- Extremely Accurate!
HO Value Line RTR - 13 Panel Coalporter - NYC (Conrail Quality) #505011
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52R class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Evergreen Scale Models - Opaque White Polystyrene T Shape .092In x 14In (4 pcs pkg)
HO 40ft Corrugated Container - Hyundai (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered
HO 19,600 Gallon Tank Car - Cerestar (NATX) #190145
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Built: BLT 11-99
PSC Transfer Van - Canadian National #76558
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
HO Procor 20,000 Gallon General Purpose Tank Car - Texaco - UTLX / Era: 1971+ - #47879
The Rapido Trains HO scale Procor GP20 Tank Car features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Photo-etched metal walkways
Detailed vent stacks, loading hatches, air tanks and braking equipment
Metal knuckle couplers
Early style features 70-ton trucks with 33in wheels and an exposed drain valve
Late style features 100-ton trucks with 36in wheels and a reinforced drain valve housing
HO Scenics Accents - Riding & Roping (6pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
A cowboy rounds up a little dogie for branding while another prepares to saddle up!
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Indiana Harbor Belt #819001
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 40Ft PS-1 Boxcar - ATSF (Bx57 Grand Canyon) #31740
Date: BLT 5-50
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
HO GP38-2 - DCC/Sound - EMD Lease #813
EMDX FEATURES:
- Built as Penn Central
- Lighted class lights
- Lighted number boards
- Correct horn per road number
- Short fuel tank
- Sinclair antenna
ROAD NUMBER SPECIFIC FEATURES:
#788
- Ex-CR #7988
- mid phase w/ chicken wire grilles
- Operation Lifesaver
- Leslie 3-chime horn
- front small EMD plow
- rear Weed-cutter plow
- unique scheme
#813
- Ex-CR #8013
- mid phase w/ chicken wire grilles
- 4-stack exhaust
- Nathan 3-chime horn
- front small EMD plow
- rear Weed-cutter plow
- black fuel/air tanks
- small cab numbers
#825
- Ex-CR #8025
- mid phase w/ chicken wire grilles
- Nathan 3-chime horn
- front Weed-cutter plow
- maroon fuel/air tanks
- large cab numbers
- named The Kristen
GP38-2 SERIES LOCOMOTIVE FEATURES:
- Operating Class Lights
- Operating Number boards
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
Code 83 or 100 Nickel Silver Terminal Joiners pkg(2) - Includes Black 22-Gauge Wire
Product Information
Simplify your next HO Scale track project using these WalthersTrack Code 83 Terminal Joiners featuring:
Ready to use - no soldering needed on or off your layout!
Quick and easy way to add feeder wires on inside of rails for more realistic trackwork
Fits evenly between ties to maintain even spacing
24In (60cm) long #22 gauge black wire leads - blend easily into ballast
Matches WalthersTrack Code 83 Nickel Silver Rail Joiners (948-83102, sold separately)
Use with all WalthersTrack Code 83 and Code 100 products on DC or DCC layouts
HO Class D10k 4-6-0 - DCC & Sound - Canadian Pacific #1063
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
HO 89Ft Flatcar w/Tri-Level Open Auto Rack - Pennsylvania Railroad PRR Rack/ Trailer-Train Flatcar #908073
Product Information
Modeling auto traffic on your 1960s and 1970s HO layout will be easy with a fleet of the WalthersMainline(R) Tri-Level Open Auto Racks! Based on bigger cars designed especially to sped loading and unloading of new automobiles, these detailed cars feature:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from mid-1960s to late 1970s carrying automobiles
Detailed flatcar with Paragon II style rack
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone. Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets & 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO SD90MAC-H Phase I - DCC & Sound - Union Pacific #8500
Detailed Information
UP FEATURES:
#8503 & #8500 represent the first renumbering, originally delivered as #8203 and #8160 respectively.
#8509, #8512, and #8520 are modeled with the starter capacitor removed and the EOT mounted further forward on the fuel tank.
Union Pacific became the only buyer of the SD90MAC-H, known to them as SD90AC, when Canadian Pacific transferred their order to the Phase 2 variant. The first 7 were considered pre-production units and wore 2-3 numbers during their lifetime. The 8500 series we are offering represents the second and third order of SD90MAC-Hs that were delivered between 1997-1999 and before their final renumbering to the 8900 series.
SD90MAC-H SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and ?printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO GE 44 Tonner Phase Ic - DC/DCC/Sound - New Haven (Warm Orange) #0804
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
1/4 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 1/4 inch
HO 55Ft Evans 4780 Covered Hopper - ADM (UELX) #10025
Product Information
Expand grain traffic along your HO railroad with a fleet of WalthersProto 55ft Evans 4780 Covered Hoppers! Introduced in 1977 and still going strong today, they can be found handling all types of grains and dried distillers grains used for animal feed. Fully assembled and ready for service, features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint and lettering
Ultra-smooth rolling 36inch RP-25 turned wheelsets
Proto MAX(TM) metal knuckle couplers
HO - ACF 5250 CF Hopper - Penn Central #897050
HO Amtrak NPCU Cabbage - DC/DCC/Sound - Amtrak (Phase III) #90225
The Rapido Trains HO scale Amtrak NPCU -Cabbage- features:
Fully powered, available in silent DC or DC/DCC/Sound
DC models are DCC-ready with a 21-pin plug
Accurate enlarged marker lights, supplementary air reservoirs and K5LA horn
Operating, flashing ditch lights
Operating strobe lights and marker lights
User-controlled operating number boards
Etched-metal radiator grilles and windshield wipers
Separate handrails and grab irons installed at the factory
Rapidos proven 5-pole, skew-wound motor and silky-smooth drive system
Metal, magnetic Macdonald-Cartier Couplers mounted at the correct height
Second release paint schemes include:
Amtrak Phase III
Amtrak Phase V
Amtrak Phase V -Downeaster-
Amtrak -Salutes Our Veterans-
Add a sunflower field to your pike with this set. Includes 60 sunflowers and base.
HO ET44 Tier 4 - DCC & Sound - Kansas City Southern #5008
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
Spray Can - Aluminum Silver (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Budd Coach: VIA Rail - Original: #101
VIA RAIL (EARLY) (1978 to mid 1990s)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
HO - Nathan K2 K14 2-Chime Air Horn - Lost Wax Brass Casting
HO Class D10k 4-6-0 - DC/Silent - Canadian Pacific #1073
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
72Ft Centerbeam Flatcar with Standard Beam - Ready to Run - Southern #601120
Product Information
Shipping lumber by train is easy for your HO railroad with a fleet of WaltherMainline 72Ft Centerbeam Flatcars on the job! Designed to speed loading and unloading, these bigger cars entered service in the 1980s and quickly became a favorite with shippers and customers. These nicely detailed models are based on earlier cars built with oval cut-outs (popularly known as -opera windows-) on the centerbeam to reduce overall weight, which are still in service with a wide range of railroads and lumber producers. Other features include:
Limited edition - one time run of these roadnumbers!
Heavy die-cast metal underframe for excellent tracking
Correct 36In turned metal wheelsets
Proto MA metal knuckle couplers
HO 40ft 16K Gallon Tank Car - Cargill/CRGX #4556
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO #6 Manual Turnout - Left Hand - 34-1/8in (867mm) Radius Curve
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes! Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation.
Suitable for all types of layouts, temporary or permanent, this modular track system features an integrally molded roadbed for realistic appearance.
Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
HO Scale Spoked Wheels - 8pkg
These wheels are from our 1929 6 speed delivery van kit. They are 0.34inch in diameter. There are 8 wheels in this kit.
1/2 inch OD Round Aluminum Tube - 0.035inch Thick x 12inch Long
Round Aluminum Tube (1 pc)
Outside Diameter: 1/2 inch
Conifer Tree Value Pack - Ready Made Trees
4 - 6inch 10 - 15cm Tall pkg(24)
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors.
Round Speaker - 20mm
This tiny, high-output speaker is suitable for N-scale and larger models.
Dimensions: 20 x 4.2mm(D)
Frequency Response: 750Hz - 9kHz
Power: 0.5 Watts (Nominal) 1 Watt (Peak)
Impedance: 8 Ohms
N Scale 17,600 Gallon Tank Car - Cargill (UTCI Repaint) #5091
Features:
- Three separate styles of manway / platform / ladder arrangements (used as appropriate per road name)
- Fine scale railings
- Separately applied brake rigging
- Separately applied manway clamshell-style cover (used when appropriate per road name)
- 100-Ton Roller Bearing Trucks
- Accurate painting and printing
- Full stand-alone brake system details
- Bottom outlet valve detail
- Stand-alone heater coil pipes
- Highly detailed body with prototypical jacket seams
- See-through top platform grating
- AccuMate couplers
AccuMate couplers are made under license from AccuRail, Inc
106 Plastic-Compatible Grease with PTFE
Labelle grease with PTFE--
Just a -dab- will work wonders, put a -dab- on the exposed gear box and run a minute or so, then add another -dab- and it will work its way throughout the gear box and worm gear.
Additional Suggested Uses:
Model Trains: Exposed or Enclosed Gear Boxes (all scales)
RC Models. Exposed or Enclosed gear boxes on all RC models of all sizes and type. Shock Absorbers
Slot Cars: Exposed or Enclosed gear boxes on Slot Cars of all Sizes
Bicycles: Enclosed cable rub points, gears.
Fishing Reel mechanisms
Other uses: Enclosed gear boxes on all sorts of Household items, squeaky door hinges, Riding toys, mechanical toys of all types.
--PTFE has been called -the slickest substance known to man- is is the parent chemical of -Teflon- which is registered trademark of Dupont Chemicals.
Grain Elevator - Kit
Detailed replica of the pipes and machinery used to move grain from bins, great for use with #304 or #305. Includes ladders with safety cages, platforms, chutes and tubes. Can be built in scale 10Ft increments, up to 90FT tall. Bins, rolling stock, buildings sold separately.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Noch 15069 - HO Parcel Carriers
Watch out... - The Postman is ringing!
The NOCH figures Parcel Carriers in gauge H0 are a real highlight and an important eye-catcher on every diorama, which is supposed to simulate real life sceneries. Every day they do hard work and delight people all over the world with parcels from loved ones or things they are looking forward to. The work of the Parcel Carriers is indispensable and should also find its place on a model layout. Great parcel scenes can be created here, such as the acceptance of the parcel or the transport of the big heavy packages. Due to the realistic clothing it gives the impression that the post man is really at the front door. Bring this great scene to your model layout.
N Procor GP20 20K Gal Tank Car - BC Rail (Company Service) #1970
FEATURES:
Drawn from original blueprints and drawings.
Artworks sourced from original design drawings and photos.
Photo-etched metal walkways.
Detailed vent stacks, loading hatches, air tanks and braking equipment.
Rapido knuckle couplers installed from the factory.
Plastruct 91861 Brown Tile Paper Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
HO GP9u - DC/Silent - CP - Multimark : #1595
- First ever accurate model in plastic - often imitated, never exact!
- Long service lives, 1980s+, all throughout Canada and the US
- Powered slug with traction motor sounds and flashing beacons
- Heavy diecast frame with super detailed piping and traction cables
- Detailed Blomberg trucks (Later series have rotating bearing caps)
- Traction motor details on gearbox
- Working track lights, class lights, control stand lights
- Metal side handrails
- Working ditch lights on prototypically appropriate road numbers
- Front and rear plows, plates or footboards on appropriate road numbers
HO Procor 20,000 Gallon General Purpose Tank Car - Sunoco - UTLX / Era: 1974+ - #46439
The Rapido Trains HO scale Procor GP20 Tank Car features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Photo-etched metal walkways
Detailed vent stacks, loading hatches, air tanks and braking equipment
Metal knuckle couplers
Early style features 70-ton trucks with 33in wheels and an exposed drain valve
Late style features 100-ton trucks with 36in wheels and a reinforced drain valve housing
HO SD70ACe - DCC & Sound - Montana Rail Link (MRL) #4315
Overview
MRL FEATURES:
Lit Number Boards
Truck lights
Nose mounted headlight
Early Brake wheel
As-delivered scheme
In 2005, MRL ordered 16 SD70ACes from EMD to help replace the aging fleet of their older EMD power. They were painted at CEECO in Tacoma WA and placed into service shortly after.
SD70ACE SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
B&O/ Chessie #C-3962
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
Better than brass detail
Brand new tooling with many roads first time offered in plastic
DCC LED lighting with the option of Sound by Soundtraxx
Railroad specific detail and road number specific detail
B&O CHESSIE FEATURES:
Brand NEW ICC B&O Style body
Caboose trucks with roller bearing caps
Illuminated marker lights, where appropriate
Overhanging, diagonal-panel roof with or without blank panel at smoke jack per prototype
Overhanging, x-panel roof for the B&O Chessie caboose
Angled window screens
Toilet Drain
Reflectors on end cages
Ash pans
Early style axle-driven generator
ICC CABOOSE FEATURES:
Better than brass detail including roadname and road number specific detail Laser-Sharp Painting and Printing
Interior seating for the addition of crew figures.
See-through End Platforms and Steps
Flush Window Glazing
Wire-form Grab Irons
Caboose trucks with animated rotating bearing or static friction bearing caps
Axle Generator Details
Body-Mounted McHenry scale knuckle-spring Couplers
Machined Metal RP25 Profile Wheel Sets
Fully-assembled and ready-to-run out of the box
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Separate wireform grab irons, etched metal coupler platforms
Coupler lift bars, trainline hoses, brake hoses, and hardware
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Weighted for trouble-free operation
Window packaging for easy viewing, plus interior plastic blister safely holds the model for convenient storage
Multiple road numbers
Minimum radius: 18In
LED LIGHT EQUIPPED FEATURES:
LED lighting for long life and reliable operation
On-board DCC Decoder by NCE
Operates in DCC and Analog (DC) with lighting Functions Controllable in DCC
Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
LED Interior Lights
All functions NMRA compatible in DCC mode
SOUND EQUIPPED MODELS ALSO FEATURE:
Soundtraxx Tsunami SoundCar decoder w/ included sounds:
Air horn or conductors whistle as appropriate
Clickety-clack with optional wheel flat spot sounds
Brake set/release sounds including retainers and brake squeal
-Big Hole- emergency brake application sound
Handbrake tie-down/release
Adjustable flange squeal
Air, horn, and bell sounds work seamlessly with Soundtraxx locomotive sound decoders
Supports Advanced Consisting in DCC
Full DCC functions available when operated in DCC mode
All functions NMRA compatible in DCC mode
HO EMD FT A+B Set - DC/DCC/Sound - Burlington (CB&Q) #108-A + 108-B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO GE C36-7 - DC/DCC/Sound - Norfolk & Western #8030 (Claytor Font)
The Rapido Trains HO Scale C36-7 is based on General Electric's higher-horsepower six-axle Dash-7 offering, with a 16-cylinder 3,600 horsepower or 3,750 hp rating (compared to the C30-7's 3,000 hp.) Built between July 1979 and February 1989, over 599 total units were produced. Of those, 129 were domestic orders for Conrail, Missouri Pacific, Norfolk & Western, and Norfolk Southern. Another 40 were made for Ferrocarril del Pacifico and National de Mexico. Lastly, 422 were made for China with many significant export differences, and the final units produced were 8 for Comilog in Gabon. Despite smaller production numbers, the C36-7 was ordered at key moments that resulted in it representing the evolution of GE s Dash-7 line more than the popular C30-7s. When GE launched "1977 Series Locomotives" (Dash-7s) in, they cataloged a C30-7, C33-7, and C36-7. Railroads immediately ordered C30-7's for booming coal service. The C33-7 was never ordered. The C36-7 was ignored until 1979, when National de Mexico and Ferrocarril del Pacifico placed orders. These export C36-7s for Mexico were essentially identical externally to C30-7s, which were being built by the hundreds at the time. Ferrocarril del Pacifico's units were repainted into striking two-tone blue FNM paint and worked both freight and passenger service. Of the 40 C36-7s built for Mexico, only one is still in service in 2024 - Ferromex 9336. Incredibly, despite being the last operating C36-7 (among few remaining operating C30-7's) 9336 was repainted in Ferromex's classy "Diet Coke" scheme in 2023. The Rapido model features railroad and era-specific details, etched-metal grilles and details, roadname-appropriate lighting packages and Rapido semi-scale knuckle couplers on both ends. The smooth-running drive features a five-pole motor with dual flywheels, backed up with the MoPower capacitor system for uninterrupted operation. This standard DC model is DCC ready with a 21-pin interface for easy conversion. The GE C36-7 is part of the line of Rapido Trains HO Scale locomotives.
The Rapido HO Scale C36-7 Locomotive features:
Headlights and rear lights
Class lights, marker lights, or ditch lights, where applicable
Step lights
Lit numberboards
Full traction motor casing details
Metal brake chain on engineers side
Detailed underbody piping and conduit
Separate grab irons
Rapidos innovative dead straight metal side handrails with plastic stanchions
Detailed cab interior
Lighted control stand
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Sound-equipped units feature ESU Loksound V5 decoders
HO NSC 60ft Ingot Flat Car - RTAX Liberty Railway Services
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
HO Scenic Accents - Train Personnel (8pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
Three Porters heft baggage while another stands empty-handed. The conductor checks his pocket watch and the Captain seems to be yelling, All aboard!
HO 50ft Waffle HC Plug Door Boxcar - MEC #27100
MODEL FEATURES:
- Separate brake wheel
- Body-mounted McHenry operating scale knuckle couplers
- Machined wheels with RP25 contours
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200061
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
DN163L0A
Fits 2011+ Version Walthers (Life-Like) PROTO N GP20 Diesel
Current Rating-Motor1.00 Amp (1.25 Amps Peak) Size0.35†x 2.12†x 0.044†(8.89mm x 53.848mm x 11.176mm) Installation Board replacement decoder Function Outputs 6-500mA
Rock Molds Layered Rock
Highly detailed, flexible and durable rock molds can be used to cast small boulders, rock outcroppings, top rocks for fields and creeks, or make entire rock faces by combining castings produced with these molds.
HO PC&F 5241 CUFT - Boxcar - St. Lawrence & Atlantic (SLR) - Single Car #186
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Horizon Dinette - Wide - Amtrak (Phase 3) #53504
Details & Specs
Rapido HO scale Horizon cars feature:
- Coach, Dinette and Club-Dinette cars available
- Full underbody detail
- GSI G70 trucks with metal wheelsets
- Accurate painting and lettering
- Constant interior lighting in DC and DCC
- Metal side grab irons
- Full interior detail
Expand container traffic on your 1960s and 70s era HO layout with this series of authentic models from - SceneMaster, featuring:
- Standard end-door and right-side door versions as appropriate
- Authentic rivet, door latch and hinge details
- Colorful period schemes
- Perfect period loads for WalthersMainline G85 and 60ft Pullman-Standard VTTX container flatcars (each sold separately)
Expansion Track -- 8-3/8"-9-9/10" 212-252mm
HO Greenville 86Ft Quad Plug Door Box Car - Delivery 12-1969 - GTW #305735
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Grand Trunk Western (GTW) -Delivery 12-1969- is notable for several reasons. First, the classy GTW scheme looks especially good on this car (in our humble opinion) with the large GT logo centered between the paired doors. Second, GTW was the largest purchaser of Greenvilles quad door box car design, making them highly statistically relevant for modelers in the US and Canada. Painted in the characteristic GTW blue color with white stenciling, these cars are sure to be crowd pleasers and were seen widely. The GTW cars feature their as-built 1969 appearance that includes Gypsum crossover platforms, Ajax brake hand brake housing, Greenville-applied tack board locations and that beautiful End-of-Car Cushioning underframe setup. 70-Ton Trucks with 33inch wheels and rotating -Benco-6- roller bearing caps finish off this dominant offering. Our GTW masterpieces are available in eight different numbers.
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .030In x 6In x 12In (2 pcs pkg)
HO Diecast 1:87 Masters 85134 Caterpillar 627G Wheeled Tractor Scraper
HO 40Ft Drop Sill Parcel Trailer - UPS/ Red #87612
Detailed Information
MODEL FEATURES:
Painted wheels
Rubber tires
Fully-assembled and ready to use out of the box
Painted and printed for realistic decoration
Officially Licensed UPS Product
HO Intermountain 4-Panel Coalporter, Canadian National
CNA Website scheme
Features:
Sharp Painting and Lettering
Prototype Accurate Paint Schemes
Multiple Road Numbers
InterMountain 100 Ton Trucks with 36in Metal Wheelsets
Metal Knuckle Couplers
HO 50ft Evans DD Plug Boxcar - USLX Tropicana #13063
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Trenton Works 6348 CN Boxcar - Canadian National (As Delivered) #598144
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
Ballast Bag - Fine Light Gray (21.6 in3)
Realistically model railroad track, crushed rock, and stones.
Easy to use and colorfast.
CMX - N Scale - The Clean Machine
The best rail cleaning system for any scale!! When used as directed, the CMX Clean Machine will clean your track better than any other method available!
FEATURES:
- Precision Machined Parts
- Solid Brass Construction
- Non-unraveling pads
- Easy Fill Design
- Leak proof valve and fill port
- Heavy weight does the job
- Quick Change Pads
- Drag pads wont catch on switch points, frogs, and any other pieces of trackwork
- Spill resistant design
- Solvent proof design
- Both solvent/abrasive options
- Large reservoir
- Multi-directional (push or pull)
- Controllable dispensing rate
Check out the additional CMX parts on our website!
HO Scale 1980-1985 Chevrolet Impala Sedan - Assembled - Amtrak Police
The Rapido Chevrolet Caprice and Impala cars feature:
Both Wagon or Sedan carbodies
1980s body style designed from photos and drawings
Multiple front grille designs covering the entire 1980s
Real rubber tires (and white walls too, where appropriate)
Multiple rim designs (wire spoke, dog dish and more)
Realistic chrome finish on bumpers, rims and more!
HO Bi-Level Auto Rack - Union Pacific/TTGX Flat Car #971460
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
Fox Valley Models N Bi-level Auto Rack
Conrail
Features:
Die-cast underframe
Finely Molded Details
Etched Metal Panels
Formed Wire
Sharp Painting & Lettering
Multiple Road Numbers
Die-Cast Underframe
Metal Wheelsets
Micro-Trains Trucks & Couplers
HO Procor 20,000 Gallon General Purpose Tank Car - Turbo Resources - CGTX / Era: 1976+ - #20276
The Rapido Trains HO scale Procor GP20 Tank Car features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Photo-etched metal walkways
Detailed vent stacks, loading hatches, air tanks and braking equipment
Metal knuckle couplers
Early style features 70-ton trucks with 33in wheels and an exposed drain valve
Late style features 100-ton trucks with 36in wheels and a reinforced drain valve housing
N Scenic Accent Figures - Farm Animals (7pcs)
A great mixture of farm animals including cows, a donkey, and horses!
HO 36Ft RTR 3-Dome Tank Car - Sunoco #2607
Product Information
Add authentic cars to your steam- or diesel-era layout with these 36Ft 3-Dome Tank Cars from WalthersMainline! Serving a wide range of both producing and consuming industries, these cars were actually three tanks in one, ideal for handling smaller amounts, and a greater variety of product at once. Features of these cars include:
One time run of these roadnumbers, limited quantity available - order now!
Prototypes hauled petroleum, chemicals and similar liquid loads in three compartments
In service from late 1920s to 1960s
Detailed underbody with AB brakes
Fully assembled
Correct 33inch turned-metal RP-25 wheelsets
Proto MAX metal knuckle couplers
GLa 2-Bay Hopper: New York, Ontario & Western #1312
Detail Variations:
Single Car
As operated from 1933 to the 1953
Features:
All-new tooling
Scaled from original blueprints
Die cast frame and floor for optimum weight
Full interior rivet and bracing details
Factory installed wire grab irons
K- or AB-brake gear installed as appropriate
Factory installed Kadee #158 couplers in narrow draft gear box
Turned metal wheels in correct PRR 12D-F8 trucks
Accurate paint and lettering
Multiple road numbers available for each paint scheme and railroad
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1802
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO GE C36-7 - DC/Silent - Missouri Pacific #9000
The Rapido Trains HO Scale C36-7 is based on General Electric's higher-horsepower six-axle Dash-7 offering, with a 16-cylinder 3,600 horsepower or 3,750 hp rating (compared to the C30-7's 3,000 hp.) Built between July 1979 and February 1989, over 599 total units were produced. Of those, 129 were domestic orders for Conrail, Missouri Pacific, Norfolk & Western, and Norfolk Southern. Another 40 were made for Ferrocarril del Pacifico and National de Mexico. Lastly, 422 were made for China with many significant export differences, and the final units produced were 8 for Comilog in Gabon. Despite smaller production numbers, the C36-7 was ordered at key moments that resulted in it representing the evolution of GE s Dash-7 line more than the popular C30-7s. When GE launched "1977 Series Locomotives" (Dash-7s) in, they cataloged a C30-7, C33-7, and C36-7. Railroads immediately ordered C30-7's for booming coal service. The C33-7 was never ordered. The C36-7 was ignored until 1979, when National de Mexico and Ferrocarril del Pacifico placed orders. These export C36-7s for Mexico were essentially identical externally to C30-7s, which were being built by the hundreds at the time. Ferrocarril del Pacifico's units were repainted into striking two-tone blue FNM paint and worked both freight and passenger service. Of the 40 C36-7s built for Mexico, only one is still in service in 2024 - Ferromex 9336. Incredibly, despite being the last operating C36-7 (among few remaining operating C30-7's) 9336 was repainted in Ferromex's classy "Diet Coke" scheme in 2023. The Rapido model features railroad and era-specific details, etched-metal grilles and details, roadname-appropriate lighting packages and Rapido semi-scale knuckle couplers on both ends. The smooth-running drive features a five-pole motor with dual flywheels, backed up with the MoPower capacitor system for uninterrupted operation. This standard DC model is DCC ready with a 21-pin interface for easy conversion. The GE C36-7 is part of the line of Rapido Trains HO Scale locomotives.
The Rapido HO Scale C36-7 Locomotive features:
Headlights and rear lights
Class lights, marker lights, or ditch lights, where applicable
Step lights
Lit numberboards
Full traction motor casing details
Metal brake chain on engineers side
Detailed underbody piping and conduit
Separate grab irons
Rapidos innovative dead straight metal side handrails with plastic stanchions
Detailed cab interior
Lighted control stand
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Sound-equipped units feature ESU Loksound V5 decoders
580 Fan Shape Weathering Brush
The angled tip of this brush has been specifically designed to add wear and strokes when using oil paints with ease.
HO DC-21 Pin Motherboard for LEDs (1)
HO 60Ft Gunderson 7550 Double Door Boxcar - TTX #664172
MASTER MODEL FEATURES:
All New Tooling!
Separate ladders, hand brake and door rods
Door stirrup, unique to the 7538
Single or double plug door as per the prototype
Roof with 3 Stanray X-panels and 3 diagonal center panels
Brake arrangement offset to A end of body
Crisp, accurate lettering and paint details
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark - 6pkg #3
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO GP9RM Mother & Slug - DCC & Sound - Canadian National (Early) #7236, 237
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
The GP9RM Slug features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks with outside brake shoes or Flexicoil trucks
Traction motor details on gearbox
Detailed walkway tread
Metal side handrails
Footboard pilots or curved plate pilots on appropriate road numbers
Working head lights
Both models are available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO 40ft Hi-Cube Smooth-Side Reefer Container - Ocean Network Express (ONE)
(White w/Magenta Lettering)
This Walthers SceneMaster HO Scale 40ft Hi-Cube Smooth-Side Reefer Container will add a modern touch to your intermodal terminals, highway scenes and railroad operations!
Ready for service on your layout as loads for and well cars and container flatcars.
Features include:
- Prototypes handle all kinds of perishables
- Detailed refrigeration unit
- Improved door latch detail
- Great detail for terminals and industrial scenes
- Realistic loads for any well car
- Ready to use
HO USRA Single-Sheathed Boxcar: D&H
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
N Scale Just Plug Lighted Vehicle - Police Car
Protecting the town and looking for hooligans, this police car is not afraid to flag down those rambunctious law breakers!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic. Add a vehicle to a Just Plug light hub for easy installation. Just plug and you are done!
20mA per Vehicle
Squealer - Motion Activated Flange Squeal System
The Squealer is a true motion-detecting flange squeal system. Using professionally recorded and edited flange squeal, the Squealer brings authentic trackside sound of steel wheels against rails for ultimate realism. The system uses a micro motion detector between the ties to sense train movements and play either the built-in professional sounds or user-defined sounds for maximum flexibility. Modelers now have the ability to recreate all the trackside audio ambience that has been missing from our model worlds.
Placed in locations on the layout where flange squeal is most likely to occur, the Squealer takes the immersive layout experience to a new level. Use individually (with one or more sensors) or place several Squealer systems together to get an all-encompassing stereo effect. The professionally recorded and edited built-in sounds provide a basic sound landscape for most situations, but custom sounds can also be loaded using a microSD card. The possibilities are only limited by your imagination!
Features:
- True motion-detecting operation: only squeals when something is moving
- Simple, discrete under-track installation
- Professionally recorded and edited flange squeal sounds play randomly
- Sounds fade smoothly when activated or deactivated
- Custom sounds can be loaded using a microSD card
- Comes complete with sensor, speaker, and control board
- Powered from 5V to 24VDC
- Additional motion sensors available
Typical Applications:
- Mainline curves
- Yards
- Tight industrial trackage
Specifications: (L x W x H)
Control Board: 3.75 x 2.25 x 0.5 inches
Speaker: 1.25 x 1.25 x 1 inches
Motion Sensor: 2.25 x 0.25 x 0.25 inches
Park Light
Operates on 16V Dc or AC
LED light source = longer life
Brass construction
Prototypical size for N scale model railroad layouts
Quick fit base removes the need for gluing, nailing and screwing - Just Drill and Drop
Lights come with quick connection plug in wire harness.
Connects directly to power source. Resistors included.
Light can be removed from mounting base and replaced with different style to change the look of any street or highway on your layout.
Acrylic Flat Colors - Field Gray - 3/4oz (23mL) Bottle
XF-65
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
OVR Exclusive - HO Bi-Level Auto Rack - Canadian National/TTGX #702509
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO Concrete Parking Barriers (12pk)
DESCRIPTION:
Color Gray. Prototype photo shown.
DIMENSIONS:
1 x 1/8 inches.
Tangent Scale Models HO 33013-05 Greenville 6,000CuFt 60ft Double Door Boxcar - Wabash (WAB) "Delivery Red 9-1963" #50091
Product: Greenville 6,000CuFt 60ft Double Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton Barber S-2 trucks with rotating Timken caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
- Wabash WAB Delivery Red 9-1963 duplicates an order of 25 cars in the classic Wabash Follow the Flag livery. This group is some of the earliest Greenville 60? cars built and features the 41ft 3inch narrow-truck centers with shorter sills. The Tangent model executed these same prototype features along with a beautiful Apex-style running board and high ladders for the era. On the end of the car, you will notice an accurate Champion-Peacock 1148 power brake and modern brake wheel. The brake step is Morton, while the crossover platforms are Apex-style, matching the Wabash prototypes. The underframe features an accurate Center-Of-Car ?Hydra-Cushion? setup with truck-mounted brake gear details. This model is equipped with 100-Ton Barber S-2 trucks with rotating Timken caps, just like the prototype. The Wabash paint and lettering are carefully replicated down to the smallest detail. It?s all there, and it?s all correct. These Wabash cars have a return route to the NYC in Warren, Michigan.
HO Scale G2 AC4400CW - DCC & Sound - Kansas City Southern #4601
Detailed Information
KCS FEATURES:
Nathan K5LAR24 horn
Late body features
PTC antennas and GPS domes
Late, notched fuel tank
Central air intake moved rearward
Fuel tank welded to frame
Evenly spaced rear grab iron
High number boards
Extended Range Dynamic Brakes
Electric air dryer
GE steerable trucks
Front and Rear ditch lights
Two handrails above inverter cabinet
A 50-unit order was delivered before the turn of the century in the KCS gray paint scheme. Beginning in 2007, these units were renumbered and repainted into the attractive -Southern Belle- paint scheme that they wear today. With the recent merger of KCS and CP, these locomotives are expected to be seen across the entire Continent.
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
SCB Interconnect Cable Connector (Short) - All Scales Signal System
HO 40ft Low-Cube Container - CLHU (3 Pack) #2
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered with new road numbers
HO ASF 50 Ton Truck With Brass Wheelset - 1 Pair
Highly detailed truck sideframes
Nickel silver plated brass insulated wheelsets
These wheels follow NMRA RP-25 Standards.
One wheel is insulated from the all-metal axle.
The entire wheelset is non-magnetic.
The axle length is approximately 1.006" (+- .004in).
10Ft 6In Modified 1937 AAR Boxcar - Toledo, Peoria & Western #7077
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15306
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO SP 3/4 Dome-Lounge w/Fluted Sides - Southern Pacific (General Service) #3606
Rapidos SP Dome Lounge Cars Features:
Designed from original blueprints and field measurements of existing cars
Two fully-detailed interior configurations
Multi-colour interior decoration
Two underbody arrangements
Accurate interior and exterior paint and decoration
Full flicker-free track-powered interior lighting
Lighting (prototypically) in the dome roof
Accurate free-rolling trucks
Metal magnetic knuckle couplers
Alco RS-11, 2nd Run - Diesel Locomotive - DCC & Sound - New York Central - Capital Scheme #8000
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO GMD SD40-2f - DCC & Sound - Canadian Pacific: Beaver Logo #9023
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO 53ft Railgon Gondola - Soo Line #64069
(oxide, white, large name)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO EMD SD40-2 - Paragon4 Sound/DC/DCC - BNSF #1680
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- 5-Pole Can Motor with Skew Wound Armature
- All Wheel Electrical Pick-up
- ABS Plastic Body with Die Cast Chassis
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Fans, Sunshades, Antennas, and More!
- Factory-Installed Engineer Figure
- Prototypical Light Operation
- Prototypically Accurate Sounds for the EMD SD40-2
- Metal Kadee-compatible Couplers (2)
- Will Operate on Code 70, 83, and 100 rail
- Minimum Operating Radius: 18 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In capacitor pack to navigate imperfect track
- Capacitor Pack automatically disabled on program track for full compatibility with JMRI Decoder Pro
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control.
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Whistle for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal - When activated, stopping triggers and stop whistle toot. When moving forward from a stopped position, toots twice. When moving in reverse. toots three times.
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
N Scale AutoFlood III RD Coal Hopper - CEFX #600555
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - GTWI
#85661
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO GE Dash 9-40CW - DC/DCC Ready - Norfolk Southern NS #9773
NS FEATURES:
Front and rear ditch lights (Alternately flash in DCC mode)
High-mounted head light and number boards
K5 horn
Electronic brakes
Graham White Electronic bell
Delivered new in 2003 from GE, NS took delivery of class 9745-9811 Dash 9-40CW locomotives. Some unique features include: electronic bell, high mounted headlight, and electronic parking brake. We are offering both versions of the front cab schemes to choose from!
ROAD NUMBER SPECIFIC FEATURES:
#9754 -White face- scheme
#9773 -Unibrow- scheme
#9806 -Unibrow- scheme
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
Gunderson Multi-Max Auto Rack - CSX
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
N Scale 50ft FMC Combo Door Boxcar - Railbox/ABOX #51952
Era: 2010-Present Day
MODEL FEATURES:
- Screw mounted, Roller bearing style trucks
- Scale profile brake wheel
- Accurately painted and printed for prototypical realism
- Body-mounted, McHenry operating scale knuckle couplers
- Machined metal wheels operates on Code 55 and 80 rail
- Weighted for optimum performance
- Highly detailed, injection-molded body
- Fully assembled and ready for your layout
- Minimum radius: 9-3/4 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
N Chips Ice House - Built & Ready Landmark Structures - Assembled
Product Information
Chip is one cool dude, operating one cool business! Chip makes sure layout residents are cool too! Chips Ice House has full architectural detail with accessories that include conveyor, gas tank, rooftop compressors and easy-access loading dock.
3-71/6 x 2-17/32in
8.73 x 6.42cm
HO Master MP-36 - DCC/Sound - Metrolink #892
Features:
- Golden-white LEDs
- Realistic die-cast underframe
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Realistic lighting effects including ditch lights and in-cab light
- Metal knuckle couplers
- Detailed cab interior
- Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
- Coupler cut levers
- Multiple unit hoses and trainline hoses
- Recommended 22 inch radius with Atlas passenger cars
DCC Ready Units:
- Equipped with a speaker for easy conversion to sound with the addition of a decoder.
DCC ESU LokSound Functionality Features:
- Over 20 sound effects are available including Head-end Power (HEP), engine start-up and shutdown, prime mover sounds through all eight
notches, bell, air horn, air compressor, dynamic brakes and more.
- There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
N Scale J. Franks Grocery - Built & Ready Landmark Structures - Assembled
Product Information
Modeled after the independently owned grocery stores that began sprouting up in the early 1900s and that can still be seen today in cities and small towns throughout America. Details and accessories include loading dock with dolly, large display windows, awnings, kiddie ride and more. The building features window treatments and you can add lighting to accentuate the included printed interior.
HO ALCo RS-3 - DCC Ready - CN (Black) #3040
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO F30A 50Ft Flat Car MOW w/Deck Rails - Conrail (CR MOW) #58512
This car does NOT include sleeper or camp vans
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
HO New Look Bus - GO Transit (Toronto) Late - Newmarket via HWY. 11- Deluxe #1046
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark - 6pkg #2
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO RTR 50Ft ACF Exterior Post Boxcar - CSX Transportation #129766
Product Information
Serve shippers on your HO railroad with these WalthersMainline 50Ft ACF Exterior-Post Boxcars. Responding to a growing shortage of serviceable cars, ACF and other builders unveiled a new generation of bigger equipment in the 1970s with increased width and height to improve carrying capacity. Today, theyre still in service for Railbox and many other roads, where they can be found moving all types of cargo. Features of these models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes seen from coast-to-coast 1974 to the present
Handles all types of general freight loading
Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
41Ft 3inch Truck Centers
15Ft 2inch Tall
10Ft 8inch Wide
Fully assembled
Correct 33inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
Alco RS-11, 2nd Run - Diesel Locomotive - DCC Ready - Central Vermont - Green w/ Noodle #3606
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO NSC 64 Ft 6000 Cubic Gondola HS - NMPX/ Niagara Metals #2363
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO USRA Single-Sheathed Boxcar: B&O
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO - 4750 Cubic Foot Rib-Sided - 3-Bay Covered Hopper - Illinois Central - #765833
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-Etched Metal Roofwalk
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO Gas Station Asphalt Parking Lot - Set of 2 Sections - Kit
Each: 10-7/16 x 5-1/4inch 26.6 x 13.3cm
Product Information
Youll always have a convenient place to park with the Cornerstone(R) Asphalt Parking Lot on your layout! Perfect for paving areas large or small and easy to install and customize, features of this kit include:
Molded in dark gray styrene with realistic texture and stress crack details
Assemble like sectional track to build a detailed parking lot large or small
Molded cut lines on the back for easy customizing
Use with Cornerstone Street System sets (each sold separately)
Matches Parking Lot sections included with Vintage Gas Station (#933-3541), Modernized Gas Station (#933-3542) and Lightning Oil Change (#933-3543), each sold separately