HO 1:87 Diecast Masters 85262 Caterpillar 320DL Hydraulic Excavator
HO SD9043MAC - DCC & Sound - Union Pacific #8044
ETA: October 2023
Detailed Information
UP FEATURES:
Leslie 3-chime horn
Large EMD plow
Front ditch lights
During the horsepower race of the 1990s, EMD offered an -upgradable- SD90MAC. EMDs 6000hp 256H prime mover was still being tested for reliability and issues at the time and UP needed power quickly. To combat this, EMD offered the SD90 with the 4300hp 710 prime mover in its place until the 256H prime mover was ready to be installed after successful testing. Unfortunately, the 256H was deemed too problematic and the conversion was never completed. UP classed these as SD9043MACs. Purchased in 1996, these big brutes were initially used in coal drag service before ultimately being used in other types of service. They were factory delivered with the -We Will Deliver- slogan. By the mid 2010s, a large batch were sold to NS for rebuilding into SD70ACUs.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights
Illuminated number boards
Etched, see-through walkway steps
Dual Sugarcube speakers for optimal sound quality
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined
flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field
measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO GE P42DC - DCC & Sound - Amtrak/Phase IV #24
Detailed Information
AMTK FEATURES:
5-Chime forward facing horn
Antenna arrangement per road number
Front and rear marker lights
Amtrak approved artwork
By 1996, production of the P40DC was replaced by the P42DC. Amtrak took delivery of over 200 units and placed them in service to ultimately replace the aging and tired EMD F40 fleet. Horsepower was increased from 4000 to 4250. Many P40DCs were upgraded to P42DC standards by the late 2000s.
ROAD NUMBER SPECIFIC FEATURES:
#8
Phase IV repaint
large and small Sinclair antennas
original style nose
#24
Phase IV repaint
large and small Sinclair antennas
original style nose
#97
Phase IV repaint
large and small Sinclair antennas
original style nose
#203
New Special Operation Lifesaver paint scheme
various grouped antennas
bolted nose
P40DC/P42DC SERIES LOCOMOTIVE FEATURES:
Officially licensed product of Amtrak (Amtrak-painted units)
Officially licensed product of Via Rail Canada (Via painted units)
Officially licensed product of Operation Lifesaver (Operation Lifesaver-painted unit)
4 different nose variations: Amtrak as-built with strobes, Amtrak as-built without strobes, Amtrak rebuilt, and Via
Operating marker lights front and rear on Tsunami2 equipped models
Rear marker lights installed, but not connected on DCC Ready models
Newly-tooled lit number boards
Flashing strobe light and -Big-Hole- emergency light on equipped Amtrak units (Operational on DCC only)
Flashing ditch lights on non-strobe equipped Amtrak units synced with horn blow (Operational on DCC only)
Flexible rubber MU hoses
Flexible rubber trainline hose
Separately applied wire handrails
Exhaust stack
Photo etched metal radiator fan grille
Highly-detailed underframe including air tanks with air lines, air filter, and air dryer with two different types of rock shields
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting including operating ditch lights and red marker lights
Completely-redesigned die-cast frame for superior tractive effort
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Equipped with dual 28mm round speakers
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Tangent Scale Models HO PS4750 Covered Hopper - KCS - Delivery Brown
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
KCS -Delivery Brown 12-1979- The KCS scheme is simple and eye-catching, with the tall KCS reporting marks, white circle delineators and brown matching trucks. The center sill correctly models the brake linkage access holes on one side of the car, just like the real ones. This is a big scheme, and we know our KCS customers have been a patient group. Our KCS terra cotta colored masterpieces accurately depict their Pullman-Standard prototypes.
PCP Power Cab Connection Panel
FEATURES:
Version 2 (current version.) A second cab bus jack added to rear. Corrected through hole size for diode. It will come with a two pin track plug.
- Designed For Use On NCE DCC Power Cab Systems Only!
- Includes Black Front Face Plate.
- Also Allows For Use Of A Power Cab System On Another Layout. (Also requires a P114 -not included- and track connection)
- Provides A Cab/Throttle Outlet For Placement Around Your Layout With The Addition Of A P114 & Connection To Your Track Wires.
The Power Cab is a self-contained DCC system inside of the NCE Pro Cab throttle case. It is a Pro Cab Throttle, DCC Booster, and DCC Command station in one unit. The 6 wire flat cable used for the Power Cab is specifically designed to provide higher current and voltages for DCC track power.
For this reason, you cannot move the Power Cab to different panel locations without a few changes to the Cab Bus network. The DCC track power to the rails and power from the wall transformer BOTH go through the Power Cab. If you unplug the Power Cab from the PCP [Power Cab Panel] DCC power is disconnected to the track and all locomotives will stop instantly.
If you do not need more power to the track and only need a new location to control trains from:
- One option is to add a second cab throttle of any kind. As long as the Power Cab stays plugged in to a PCP, a second UTP panel and a second cab throttle can be added to provide control from a different location. You can have an unlimited amount of panels with certain provisions for cable length. Option B could also be a wireless cab. If the Power Cab again stays plugged in, you add an RB02 radio base station and any wireless cab.
- If you need more power, add the SB5 Smartbooster. The SB5 is a combination 5amp DCC booster and command station [similar to the NCE PH Box]. With the SB5 running the layout, the Power Cab reverts to functioning as just a regular Pro Cab throttle. The Power Cab can now be unplugged and used in multiple locations via UTPs. You can use the PCP for this with no track wire or power connections on the rear.
- The Power Cab can be used between two completely separate locations such as a work bench and a layout by having two P114 power supplies and two (PCP) power cab panels set in each location. The two locations cannot be electrically connected or have a connection via track.
N Scale Centralia Car Shops Superdome Passenger Car - ON Rail (Otter Rapids) #900
- Includes Magnetic Wand to Light Up!
LIMITED QUANTITIES AVAILABLE!
HO EMD SW9 - DC/ Silent - Union Pacific (UP As Delivered Slogan) #1838
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Union Pacific:
Features the as-delivered slogans -DEPENDABLE TRANSPORTATION- on the right hand side of the cab, and -SERVES ALL THE WEST- on the left hand side of the cab.
Delivered in 1953
Optional -beehive- style spark arrestors with short stacks in polybag
Carbody style handrails
Extra tall -safety end rails- on the cab end
Reflectolite flashing warning light
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO Greenville 86Ft Quad Plug Door Box Car - Delivery 12-1969 - GTW #305774
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
Grand Trunk Western (GTW) -Delivery 12-1969- is notable for several reasons. First, the classy GTW scheme looks especially good on this car (in our humble opinion) with the large GT logo centered between the paired doors. Second, GTW was the largest purchaser of Greenvilles quad door box car design, making them highly statistically relevant for modelers in the US and Canada. Painted in the characteristic GTW blue color with white stenciling, these cars are sure to be crowd pleasers and were seen widely. The GTW cars feature their as-built 1969 appearance that includes Gypsum crossover platforms, Ajax brake hand brake housing, Greenville-applied tack board locations and that beautiful End-of-Car Cushioning underframe setup. 70-Ton Trucks with 33inch wheels and rotating -Benco-6- roller bearing caps finish off this dominant offering. Our GTW masterpieces are available in eight different numbers.
HO Brass Chain - 12 Inches - 40 Links Per Inch
A-Line Chain is great for detailing all kinds of models in all scales. Available in a variety of sizes measured as links per inch, chain is also available in multiple kinds of metals.
HO P42DC - DCC Ready - VIA #917
Detailed Information
VIA FEATURES:
VIA-added extra nose light
VIA style antenna array
Dual 5-chime forward facing horns
Forward and reverse red marker lights
VIA approved artwork
Starting in 2017, VIA began to add wrapped schemes for their P42DC fleet. By 2019, -Love the Way- in both English and French was applied to a few select units with each side having a different version. In Nov. 2019, VIA applied the -Poppy- scheme, a tribute to veterans, to a small handful of units.
P40DC/P42DC SERIES LOCOMOTIVE FEATURES:
Officially licensed product of Amtrak (Amtrak-painted units)
Officially licensed product of Via Rail Canada (Via painted units)
Officially licensed product of Operation Lifesaver (Operation Lifesaver-painted unit)
4 different nose variations: Amtrak as-built with strobes, Amtrak as-built without strobes, Amtrak rebuilt, and Via
Operating marker lights front and rear on Tsunami2 equipped models
Rear marker lights installed, but not connected on DCC Ready models
Newly-tooled lit number boards
Flashing strobe light and -Big-Hole- emergency light on equipped Amtrak units (Operational on DCC only)
Flashing ditch lights on non-strobe equipped Amtrak units synced with horn blow (Operational on DCC only)
Flexible rubber MU hoses
Flexible rubber trainline hose
Separately applied wire handrails
Exhaust stack
Photo etched metal radiator fan grille
Highly-detailed underframe including air tanks with air lines, air filter, and air dryer with two different types of rock shields
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting including operating ditch lights and red marker lights
Completely-redesigned die-cast frame for superior tractive effort
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
Relay Enclosure
HO Ford C Box Van - White
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Rubber tires
Bowser 25236 - HO ALCo RS-3 Phase 3 - DCC & Sound - Western Marylannd as Delivered #196
Ready To Run with Locomotive specific details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC. DCC/Sound version features LokSound V5 decoder.
HO GE ES44AC - DC/DCC/Paragon3 Sound - CREX #1206
The Evolution Series 4400HP DC Traction locomotive is part of GE Transportation Systems line of diesel locomotives that were built to meet the EPAs 2005 Tier 2 locomotive emissions standards. All Evolution Series locomotives delivered to the North American market are six axle locomotives equipped with Nathan-Airchime K5HL-R2 Evolution airhorns.
The GE ES44AC is still in use today serving the entire nation through a variety of hauling tasks including traffic resulting from the Ethanol mandate. CSX has some 200 units on or coming onto its roster, while Iowa Interstate ordered 14 units. Norfolk Southern purchased 24 units, receiving the first of its allotment in 2008. This spectacularly detailed modern diesel will come equipped with our cutting edge Paragon3 Sound and control system and will feature variable load-based smoke output -- yet another way that Broadway Limited leads the pack in model railroading technology!
Industry-Leading Features:
-NEW Paragon3 Sound & Operation System FEATURING ROLLING THUNDERTM with Authentic Sounds and
Prototypical Operation in both DC and DCC environments
-Variable Load-Based Smoke Output
-Locomotive Composition: ABS body with Die Cast Chassis
-Couplers: (2) Operating Kadee or Compatible
-Compatible Tracks: Code 83 and 100 Rail
-Minimum Operating Radius: 18 in or greater
HO Trenton Works 6348 CN Boxcar - Canadian National (w/ Conspicuity Stripes) #598145
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
HO 60ft PS Flatcar - BNSF #584971
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
578 Diagonal Weathering Brush
The angled tip of this brush has been specifically designed to add wear and strokes when using oil paints with ease.
HO 55Ft Evans 4780 Covered Hopper - ADM (UELX) #60120
Product Information
Expand grain traffic along your HO railroad with a fleet of WalthersProto 55ft Evans 4780 Covered Hoppers! Introduced in 1977 and still going strong today, they can be found handling all types of grains and dried distillers grains used for animal feed. Fully assembled and ready for service, features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint and lettering
Ultra-smooth rolling 36inch RP-25 turned wheelsets
Proto MAX(TM) metal knuckle couplers
Microscale 87948 - HO Canadian National - GP7 and GP9 Hood Diesels (1953-1961)
HO RTR 40Ft Single-Door Steel Boxcar - Delaware & Hudson (Bridge Line Logo) #19688
(yellow, blue)
Product Information
Bowser HO Scale ready-to-run 40Ft Single-Door Boxcars feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make 40Ft Single-Door Boxcars welcome additions to any transition and classic diesel-era freight consist. Check out the entire line of Bowser HO Scale ready-to-run boxcars.
HO Versatile Modular Loading Docks - Kit
Kit contains four 10 X 40 foot dock modules and two ramps. Combine them in any configuration you want! They are designed to butt flush up against each other. Make a loading dock beside your industry, piggyback ramps, warehouse platforms, team track loading ramps and more!
Each module measures 1-3/8 X 5-1/2 inches.
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Mobilgas #229
Date: BLT 9-28
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
PS-2 2003 2-Bay Covered Hopper - Chicago & North Western #95305
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
Hi-Tech Details HO 6003 Universal Antenna Dome GE Version for BNSF and UP
Features
Molded in white plastic and ready for finish to be applied.
HO Alco FA-1 & FB-1 Set - DCC & Sound - Great Northern #442A, 442B
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
Paint PLA Enamel - Flat Black - 1/4oz Bottle
Product Information
All-purpose paints are fast drying, easy to apply and can be used on many different surfaces. Colors are carefully controlled from batch to batch so that each bottle exactly matches the corresponding spray. Use on styrene, ABS plastic, wood, metal, leather, glass, wax and other materials. Colors dry fast to a hard gloss finish (unless noted).
Snap Relay
Description
A double pole, double throw relay with actuating mechanism for all scales.
Includes One Snap Replay
Easy To Install - Can Be Mounted Anywhere
Can Do One Of The Following Below:
Power The Frogs On Atlas Mark 3 and Code 83 #6 Turnouts
Control Track Side Signal Lamps To Show Turnout Point Positions
Operates Control Panel Lamps To Show Settings Of Remotely Located Switches Or Turnouts
Provide Selective Track Siding Control
Control X-Section Automatically, Which Is Discussed In The Atlas Complete Wiring Book (ATL-12)
HO Lightweight Coach - Long Island Rail Road #2187
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
PS-2 2003 2-Bay Covered Hopper - Denver & Rio Grande Western #18327
Detailed Information
MODEL FEATURES:
Fully assembled and ready-to-run
Photo-etched roof walks
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Weighted for trouble-free operation
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Body mounted McHenry scale knuckle spring couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
All 4-packs come with unique road numbers
HO SP 3/4 Dome-Lounge w/Fluted Sides - Southern Pacific (Overland) #3603
-Overland Style
Rapidos SP Dome Lounge Cars Features:
Designed from original blueprints and field measurements of existing cars
Two fully-detailed interior configurations
Multi-colour interior decoration
Two underbody arrangements
Accurate interior and exterior paint and decoration
Full flicker-free track-powered interior lighting
Lighting (prototypically) in the dome roof
Accurate free-rolling trucks
Metal magnetic knuckle couplers
HO MLW M420 A/B Set - DC/DCC Ready - BC Rail (Red/White/Blue) #644, 684
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
HO Bi-Level Auto Rack - Norfolk Southern/TTGX Flat Car #704327
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
Plastruct 90065 ABS H Column 1/4 (5 pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/4 in
HEIGHT IN MM
6.4mm
WIDTH IN INCHES
1/4 in
WIDTH IN MM
6.4mm
THICKNESS IN INCHES
.060 in
THICKNESSS IN MM
1.5mm
LENGTH IN INCHES
15 in
LENGTH IN MM
375mm
HO Bi-Level Auto Rack - Southern Rack/TTX Flat Car #603785
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO RTR ACF 2970 Covered Hopper - Grand Trunk and Western (3pkg)
Detailed Information
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons and stirrup steps
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple road numbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
Trainman HO Thrall 4750 Covered Hopper - Canadian National (IC) #769564
Features:
-Weighted body
-Equipped with AccuMate Knuckle Couplers
-Trucks equipped with free-rolling metal wheels
-Accurate painting and lettering
AccuMate couplers are made under license from AccuRail, Inc.
HO RTR ACF 4650 3-Bay Hopper - SOO Line #74160
Date: BLT 11-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
Moss Green
Seal your base and add color all at once! Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Undercoat lays a base for creating dark depths to shallow shorelines, and underwater scenes for any aquatic ecosystem. Create customized colors by mixing Water Undercoat together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
HO Scale 89ft Channel Side Flatcar - Trailer-Train #150122
(1960s Brown, 40ft Trailer Service)
Built especially for the bigger trailers entering service in the 1960s, this Walthers Mainline model of the 89ft channel side flatcar is a must for period intermodal modeling in HO scale. Based on the F89F flatcars owned by Trailer Train and many railroads, over the years these cars carried 28, 40, 45, 48, and 53ft trailers.
FEATURES INCLUDE:
- One time run of these road-numbers, limited quantity available!
- Heavy die-cast metal underframe for great performance empty or loaded
- Used in piggyback and other service 1963 to the present
- Prototypical C-shaped steel channel side sills
- Detailed brake gear
- Swinging coupler pocket for 18 inch radius curves
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
SD70M-2, CITX #140 - DCC & Sound - SoundTraxx Tsunami2 sound
New for the SD70ACe and SD70M-2, LED lighting
Antenna Dome
Early cab
Nose mount headlight
Nose door with no window
Early handrails
New for the SD70ACe and SD70M-2, LED lighting
Correctly-sized operating ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or tube style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Jacking pads per prototype
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
HTCR or HTSC trucks per prototype
Non-sound QuickPlug equipped with NEM 21-pin DCC plug
McHenry scale knuckle spring couplers
Minimum radius: 18 inch
Recommended radius: 22 inch
HO RTR ACF 4650 3-Bay Hopper - SOO Line #74224
Date: BLT 11-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
CSX #4679
DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
These SD70Ms previously wore the EMD demonstrator scheme of burgundy with a black underframe. When they were acquired by CSX, they ran for several years before being repainted in the then-current YN2 - Bright Future - scheme, which they are depicted with here. In addition, several of the units received special names adorning the sides of the nose-all were significant places in Florida, where the SD70Ms worked frequently.
Features
Fully-assembled and ready-to-run
Front/rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Operating ditch lights
MU receptacles and cables per prototype
Pilot face spare knuckles and brackets per prototype
Early or late anticlimbers
3 or 4 step walkways
AEI tags mounted on the frame or jacking pads per prototype
Safety tread on the walkways
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Anti-glare panel painted on the nose
Windshield wipers
Tinted or clear cab windows per prototype
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Standard or Freight-style brake wheel
See-through radiator fans
Lift rings
Factory installed wire grab irons
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Dual sanding lines
Rear pilot drop grab iron (MU hose retainer) pre prototype
DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Incandescent bulbs for realistic appearance
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18 inches
Recommended radius: 22 inches
Lift Rings - Flat - Mounts on Pilot Beam - pkg(8)
HO City Apartment Background Building - Kit
DIMENSIONS:
8-1/8 x 5-3/16 x 12-11/16 inches (20.6 x 13.2 x 32.2cm)
- Thin-profile Background Building
- Building depth is easily modified
- Nine-story stone and brick construction
- Great for steam or diesel-era layouts
- Decals for chiseled Art Nouveau detailing
- Printed interior and exterior details
- Easy-to-build plastic kit
- Molded in three colors and clear plastic
HO Bettendorf 50 Ton Truck With Brass Wheelset - 1 Pair
Highly detailed truck sideframes
Nickel silver plated brass insulated wheelsets
These wheels follow NMRA RP-25 Standards.
One wheel is insulated from the all-metal axle.
The entire wheelset is non-magnetic.
The axle length is approximately 1.006" (+- .004in).
Wiring Connector for Tortoise Switch Machine - 12-Volt
Accu-Lites SNAPS! is an easy wiring connector for the Tortoise Slow Motion Switch Machine. It is composed of a connector that SNAPS onto the Tortoise and an eight-position wiring block for wiring up the Tortoise.
NOTE: These are used for the older switch machines!!
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
Models depict in-service locomotives from the mid-1990s and beyond.
Road name and road number-specific painting and lettering.
Multiple road numbers offered.
New and improved high-torque motor and drive mechanism guarantees smooth operation.**
Operating radiator fans. Improved radiator fan drive unit with quieter operation and selective fan control.**
All-wheel power pickup and all-axle drive.
Heavy die-cast, zinc alloy chassis.
AuroraJanney scale head replica couplers installed.
NMRA RP-25 wheel contour with Code 110 tread width.
Minimum radius: 18? (recommended 22?)
* Lighting functionality is limited on DC models operating on DC track power.
** Improvement over our previously-released HO scale SD60F.
DC Version Features:
DCC ready with 21MTC connector.
Dual sugar-cube speakers (functional after installation of a DCC sound decoder).
Operates on DC track.
HO Chemical Tankcar - Hooker Chemicals #1377
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Wireform safety handrails
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 15inch
HO Union X-3 Tankcar - Products Tank Car (PX) #32497
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO Conrail (CR) G41A Repaint 1976 w/ Hoods PRR Shops G41A Coil Car
CR G41A Repaint 1976 w/Hoods illustrates an early CR repaint. Check out the thinner style CR logos, PC/CR style data stencils, and era appropriate ACI and PC/CR style double COTS. The early CR cars maintained their hoods for protection of the coil shipments. If you want to model the car later in their service lives, do not panic: The hoods are removeable. The interior troughs have all of that loading and identification data, too. The ends feature the original shorter style coupler lift bar brackets and Morton style crossover platforms. The 125-Ton trucks feature rotating Timken caps, 38in wheels and accurate brake beams with truck mounted brake details.
Also, these cars look great loaded with our all-new coil loads sold separately!
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
HO EMD GP7 - DC/DCC Ready - Erie Lackawanna EL #1221
NEW! Roof access hatches on non-dynamic units per prototype
Undecorated units offered
Blomberg B trucks with appropriate bearing bearing caps
EL FEATURES:
Re-Lettered Erie units; post 1960
Dynamic or non-dynamic, depending on road number
Two single-chime horns
-Canvas- sunshades
Long-hood-forward operation
Curved spark arrestors
In 1960, the Delaware, Lackawanna and Western Railroad merged with the Erie Railroad to form Erie-Lackawanna. The Erie had owned a sizeable number of EMD GP7s, which were all less than 10 years old at the time of the merger and still giving good service. Rather than spend precious money to repaint these units immediately, the EL decided to retain the Erie paint scheme, but omitted the -wings- on the ends of the units and added their own logos. The units continued in this guise until the mid-to-late 1960s when most were repainted in the grey-and-maroon EL scheme.
ROAD NUMBER SPECIFIC FEATURES:
#1207 Dynamic brakes
#1214 Dynamic brakes
#1221 Non-dynamic brakes
GP7 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
NEW! Roof access hatches on non-dynamic units per prototype
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - GAXX #6429
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Procor 5820 Covered Hopper - UNPX - Procor Mid Black Solid #122466
The Rapido Trains N scale Procor 5820 cu ft Covered Hopper features:
Three styles of roof hatches: round, round with ribs and 20 inch vented cover
Two styles of outlet gates: pneumatic and Miner
Etched walkways
Spare hatches included in polybag to let modeler modify for different era
Full end cage details
Accurate paint and lettering
Multiple road numbers available for each scheme
HO Diesel MU Receptacles w/Blank Covers - 3 Types (2/pkg)
Three different types of receptacles and two styles of covers.
Detail Associates HO Scale MU Receptacles are based on those used on many diesel locomotives for operating in multiple-unit consists.
HO H21A 4-Bay Hopper - K Brakes - Pennsylvania (PRR Red, Circle Keystone) #176737
1930+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
N14A3 Decoder - Board Replacement DCC Decoder
Direct plug in to Atlas GP39-2, Intermountain SD40-2 plus other plug-and-play N Scale locos
Dimensions: 2.6 x 0.350 x .079 inches (66 x 8.9 x 2.0 mm)
Features of this decoder:
- Silent Running torque compensated motor drive
- Torque Compensation for ultra smooth low speed performance
- Motor rating 3/4 Amp continuous, 0.75 Amp stall
- All four function outputs have lighting effects generators
- Select from 15 different lighting effects
- Full support for LED lighting
- Decoder programming lock mechanism
HO 36ft Galvanized Steel Stiffened Backdrop Grain Bin - Kit
(Narrow - 2.66 inch Corrugation)
(NOTE: this backdrop bin is not a full round bin - it is cut 4ft beyond halfway to simplify placing the bin against a flat backdrop while still allowing room for the walkways, conveyors, and other equipment at the top.)
Corrugated steel grain bins are a staple in any agricultural setting, placed on farms, elevators, industries, and beside railroad tracks. Used with a variety of farm commodities, these bins provide a safe, dry place to store that commodity until it goes to market.
With several styles to choose from, these grain bins will look right at home on your layout. They feature prototypical corrugations, realistic galvanized steel appearance, various side sheet heights, and a variety of diameters.
Narrow corrugation bins have corrugations spaced a scale 2.66 inches and the rings are 32 inches tall. Wide corrugation bins have corrugations spaced 4 inches apart with 44 inch tall rings.
All bins are easy to assemble - just stack the rings, glue them together, attach the roof and you are done! Every ring comes as one solid piece, so no time consuming and messy assembly of individual side sheet pieces to create each ring, saving you time and frustration!
What size bin will fit your space? Try our grain bin size calculator or printable template.
https://www.iascaled.com/store/GrainBinSizeCalculators
https://iascaled.com/docs/ho-bin/GBM-HO.pdf
Spray Can - Pearl Blue (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Speaker Gasket Kit - 40 x 28.5 mm (4pk)
Package of four gaskets for mounting our 40 x 28.5mm oval speakers (P.N. 810078).
Modern Sectional House - Kit
6-7/8 x 3-5/16 x 2 in
(17.5 x 8.4 x 5.2 cm)
HO folks in the market for a new home will want to check out the Modern Sectional House from Cornerstone! This detailed structure kit is typcial of factory-built homes seen all across North America, as stand-alone houses or part of entire neighborhoods. Designed for easy construction, features include:
Two nonworking porch lights
Electric meter
Gas meter
High-efficiency furnace inlet and outlet pipes
Shutters for front windows
Two styles of doors
Concrete steps with railings
Full foundation skirting
All Scale Learning Kit - River/Waterfall
Learn to create the illusion of water depth, make a river and a waterfall.
Realistic Water will model a river approximately 1 in w x 28 in l x 1/8 in d (2.54 cm x 71.1 cm x 3.17 mm).
Water Effects will model a waterfall approximately 1 1/4 in w x 5 in l x 3/32 in d (3.17 cm x 12.7 cm x 2.38 mm).
Value-packed tools specifically developed to teach beginning modelers and other hobbyists how to use the Terrain and Landscape Systems. Learn to sculpt terrain, cast, color and install rocks, landscape various scenes, create paved areas, make trees, model water features and other scenic details. Reseal packages for easy storage.
Plastruct 90086 ABS TEE 1/4 (4pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/4
HEIGHT IN MM
6.4mm
WIDTH IN INCHES
1/4
WIDTH IN MM
6.4mm
THICKNESS IN INCHES
.060
THICKNESSS IN MM
1.5mm
LENGTH IN INCHES
24
LENGTH IN MM
600mm
USE DESCRIPTION
ABS TEE Use for bracing in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is
HO 5820 Covered Hopper - Procor/UNPX (BF Goodrich) #122157
Era: 1978+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
Built-&-Ready Landmark Structures - Clyde & Dales Barrel Factory
Assembled - 6-5/8 x 5-11/16 inches
(16.8 x 14.4cm)
With its definitive architecture, weathered exterior and rooftop water tank, this old beer barrel factory brings back the past when factories had their own water supply. Individually crafted details include a propane tank, dock-high loading areas, exhaust vent and ladders.
HO Double-Track Cut-Stone Viaduct - Variable Height
Features:
Available in single track or double track widths
Kit contains single arch and two half-arch ends - combine kits for longer applications
Can be used w/o pier units for lower heights such as in urban settings
Concrete double track viaduct also suitable for O scale single track applications
Length - 18inch
Width - overall (Single) = 3 1/4inch, (Double) = 5 1/4inch
Width - btw. walkways (Single) = 2 1/8inch, (Double) =4 1/8inch
Height (w/ piers) - to deck = 9 5/8inch, to top of railings = 10 3/8inch
Height (w/o piers) - to deck = 3 1/2inch, to top of railings = 4 1/4 inch
HO AAR 1944 Boxcar - Illinois Terminal #6025
Expand HO freight service with these colorful Walthers Mainline models based on the popular American Association of Railroads (AAR) standard boxcar design from 1944. Used for all types of general loading, the durable steel cars were still going strong into the 1980s.
Features of these models include:
-Limited Edition - one time run of these road numbers
-4-4 Improved Dreadnaught ends
-Murphy panel roof
-See-through Apex steel running board
-6ft Youngstown doors
-10ft 6in Interior height
-AAR (Tab) side sills
-Correct 33in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO Conrail (CR) G41A Repaint 1976 w/o Hoods PRR Shops G41A Coil Car
CR G41A Repaint 1976 w/oHoods illustrates an early CR repaint. Check out the thinner style CR logos, PC/CR style data stencils, and era appropriate ACI and PC/CR style double COTS. The early CR cars maintained their hoods for protection of the coil shipments. If you want to model the car later in their service lives, do not panic: The hoods are removeable. The interior troughs have all of that loading and identification data, too. The ends feature the original shorter style coupler lift bar brackets and Morton style crossover platforms. The 125-Ton trucks feature rotating Timken caps, 38in wheels and accurate brake beams with truck mounted brake details.
Also, these cars look great loaded with our all-new coil loads sold separately!
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
HO 40ft ACF Modernized Welded Boxcar - Reading #107984
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Signal Extension Cable - All Scales Signal System Medium - 60inch 152cm
N Scale 3230 Covered Hopper - CIT Group (CBFX) #440522
Features:
- All new tooling
- Ready to run
- Injection molded plastic
- Fine scale detail
- Etched metal roofwalks
- Crisp painting and printing
- Magnetic couplers
- Metal wheelsets
The Trinity 3230 Pressure Differential (PD) covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
OVR Exclusive - HO Bi-Level Auto Rack - CP Rail/TTGX #603858
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
Scenic Accent Figures - Backyard Basics (5 pkg)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism.
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504880
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
Spoke Shave Replacement Blade
2 blades to fit the Zona Spoke Shave.
Blades are 7/8in wide x 5/8in.
HO Snow Plow - 1st and 2nd Gen Hood Units
Product Information
Details West Snow Plows will help keep the rails clear on your HO Scale layout. Available in several designs to match a variety of prototypes, each part is a detailed metal casting. This Snow Plow is part of the complete line of Details West HO Scale locomotive details.
1st and some 2nd generation hood units of SP&S (BN), IC, SP, CN including Alco Centuries.
HO Deluxe Thomas Troublesome Trucks Set - Standard DC - Thomas and Friends(TM)
Sir Topham Hatt has sent Thomas to the quarry to make a pickup with the Troublesome Trucks. Now freshly filled with a load of ore from the Quarry Tower, they are ready to head off to their final destination. The Troublesome Trucks may be tricky to handle, but Thomas is confident they will get there on time. With our Deluxe Thomas & Friends(TM) set, you can relive the stories seen in the Thomas & Friends(TM) books, television shows, videos, and feature film, or create your own railway adventures!
This ready-to-run train set includes:
- Thomas the Tank EngineTM with moving eyes
- Troublesome Truck #1 with ore load and international-style hook-and-loop couplers
- Troublesome Truck #2 with ore load and international-style hook-and-loop couplers
- Quarry Tower
- 47 x 38 inch oval of snap-fit E-Z Track? with 12 pieces of curved track, 1 piece of straight track, and 1 straight
plug-in terminal rerailer
- power pack and speed controller
- illustrated instruction manual
HO Chemical Tank Car - Vulcan Chemicals #1014
MODEL FEATURES:
- Separately applied brake wheel
- Wire form safety handrails
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Machined metal wheels with RP25 contours
- Highly-detailed, injection-molded body
- Minimum radius: 15 inch
- 3-packs feature unique road numbers
N Straight Roadbed Track Section - 9-3/4in (24.8cm) (4/pkg)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Uni-joiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
N Scale Short Barrel Ore Hopper - Ontario Northland: Progressive Green #6527
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO F30D 50Ft TOFC Flat Car w/ Trailer - TTX (Early Red) #475071
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
42 ft Coil Steel Car with Fish Belly Side Sill DLRX #166274
The Atlas Master HO Scale 42ft Coil Steel Car with Fishbelly Side Sill is perfect for adding interest to your 1990s and later steel mill train consists. The increased volume of coiled-steel transportation gave rise to a new purpose-built freight car. Previously rolls of coiled-steel had generally traveled in specially equipped gondola cars. In the 1960s a lighter type of car emerged specifically for hauling coils of steel in an integral trough. The car type gained popularity and eventually over 17,000 cars were built. This 42ft Coil Steel Car with Fishbelly Side Sill is patterned after cars introduced in the 1990s and in use in the 21st century. Features of the 42ft Coil Steel Car with Fishbelly Side Sill include prototypical paint schemes and lettering see-through walkways, a removable hood on equipped cars, inside floor detail cut levers, metal wheels and AccuMate magnetic knuckle couplers.
HO MLW M420 A/B Set - DC/DCC Ready - British Columbia (Two-Tone Stripe) #645, 687
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX #16153
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Curved Light Ver. 2
Operates on 16V DC or AC
LED light source = longer life
Brass construction
Prototypical size for N scale model railroad layouts
Quick fit base removes the need for gluing, nailing and screwing - Just Drill and Drop
Lights come with quick connection plug in wire harness.
Connects directly to power source. Resistors included.
Light can be removed from mounting base and replaced with different style to change the look of any street or highway on your layout.
HO 60ft Flat Car - OTTX/Red Logo (3pk)
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
N Scale NSC 5111 50Ft Plug-Door Boxcar - Quebec Gatineau #75130
MASTER MODEL FEATURES:
Bodies: 5111 or 5277 cubic foot styles
Ends: Nine or ten corrugations
Painted safety rails
Doors: 9ft or 10ft plug doors
Side Sills: Deep or shallow sills
Trucks: 70- or 100-ton
GATC 20,000-Gallon GS Tank - GI/GATX (3)pkg
MODEL FEATURES:
- Fully-assembled and ready to run out of the box
- All models are representative of prototypical paint schemes
- Weighted for trouble-free operation
- Body mounted McHenry operating scale knuckle couplers
- 70 or 100-ton Roller Bearing trucks with animated spinning bearing caps per prototype
- 33 inch (70-ton) or 36 inch (100-ton) machined metal wheels with RP25 contours operate on all popular brands of track
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- 3-Packs feature unique numbers not available separately!
- Highly-detailed, injection-molded body
- Separately applied brake wheel and ladders
- Painted and printed for realistic decoration
- Replacement parts available
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Perfect starting point for adding grime and rust
- Faded base colors matched to the prototype
HO Brake Vent Valve - Regulator pkg(2)
HO Bathtub Coal Gondola - MWCX (ex-CP) #100429
Built: 3-06
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
Intermountain Railway HO Scale Evans 100 Ton Coil Car Chicago North Western #39612
HO 60ft PS Flatcar - TTX/VTTX #92197
(yellow, black and white TTX logo)
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Diesel Detail Kit for EMD SD50 & SD60
Make your Walthers Mainline locos even more realistic in minutes with this Diesel Detail Kit! The complete set of HO grab irons fits the standard locations on the model, and they are made of durable, factory-formed stainless steel wire. The set details one model and includes illustrated instructions.
Parts in this set include:
Fan guard grab iron
Blower duct grab iron
11 standard drop grab irons: four for short hood, seven for long hood
HO Code 100 Turnout 2nd Radius - Right Hand
Technical Specification:
Length: 168mm
Frog Angle: 22.5 Degrees
Radius: 438mm
Walthers HO SceneMaster International(R) 4900 Single-Axle Semi Tractor Only - Assembled UPS 2 Axles
Licensed replica of popular International(R) trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled & painted
Die-cast metal and plastic parts
HO - Nathan K3 K3LAR1 3-Chime Air Horn - Lost Wax Brass Casting
HO 40Ft Sheathed Boxcar - Canadian Pacific Railway #234051
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Machined metal wheels with RP25 contours
Body-mounted McHenry operating scale knuckle couplers
Painted and printed for realistic decoration
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 15inch
Scene Master Trackside Weeds Kit
Love them or hate them, this SceneMaster Trackside Weed kit makes it easy to bring realistic detail to any setting! Perfect alongside HO railroad and highway rights of way, theyre also a must for overgrown yards, gardens and more. The kit features:
Installs in minutes in new or existing scenery
Parts molded in realistic colors
Easy assembly with illustrated step-by-step instructions
Super value set includes 125 pesky plants:
3 Overgrown Grass mat sections
20 Dandelions (with white and yellow flowers)
6 Leafy Tendrils/Creepers
24 Ivy plants
40 Cornstalks
32 Broadleaf Weeds
HO Vancouver Iron Works Piggyback Flatcar - Canadian National #688031
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
Norfolk Southern NS #1700 - Patch Ex Conrail
Standard plow
Ex Conrail Quality
Cab signal box
Cab armrests
Mirrors/Windwings per prototype
Low profile Fans, dustbin, exhaust, dynamic brake vent
Low profile bracket mounted S3LR
5000 gallon fuel tank
Hood side vents per prototype
Ex Conrail patched
Era: 1999+
SD45-2 FEATURES
Fully-assembled and ready-to-run
Multiple unit (MU) hoses with silver glad hands
Front and rear trainline air hose with silver glad hands
Horns per prototype
See through cab windows
Detailed and painted cab interior
Fine-scale handrails for scale appearance
HT-C trucks with Timken bearings
McHenry scale knuckle spring couplers
Accurately painted and printed paint schemes
Incandescent bulbs for realistic appearance
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on Code 70, 83, and 100 rail
Bidirectional constant lighting so headlight brightness remains constant
Minimum radius: 18inch
Recommended radius: 22inch
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) #653109
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
Ready-Made Trees, Value Pack - Blue Spruce, 2-4 inches (18pk)
Code 83 Deck Truss Bridge
HO F89F Trailer - RTTX/Yellow #154350
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast underframe
- Wire formed brake plumbing
- Detailed deck
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Minimum radius: 22 inches
- Recommended radius: 24 inches
HO EMD FT A+B Set - DC/DCC/Sound - Great Northern (GN As Delivered) #402-A + 402-B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
Athearn HO Scale - RTR 30,000 Gallon Ethanol Tank Car - CTCX - #2 - 3pack
Detailed Information
301157, 301164, 301182
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
HO Single-Track Railroad Bridge Stone Abutment - Resin Casting
Approximate Dimensions: 3-1/4 x 5/8 x 5-3/4 inches
FEATURES:
- Common prototype design used with various types of bridges
- Fits steam, diesel and modern-eras
- Highly detailed parts
- Use with Cornerstone single-track bridges
N Scenic Accent Figures - Pedestrians (6/pkg)
Woodland Scenics N Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and hand painted for extra realism. The Pedestrians figure set includes six assorted adult figures in standing and walking poses!
F30A 50Ft Flat Car: Lehigh Valley #10037
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
HO USRA Single-Sheathed Boxcar: N&W
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Streaking Effects Enamel Paint Set (12, 13, 14)
35ml X 3 jars per set
N Procor 5820 Covered Hopper - UNPX - Procor Low Black Solid #122392
The Rapido Trains N scale Procor 5820 cu ft Covered Hopper features:
Three styles of roof hatches: round, round with ribs and 20 inch vented cover
Two styles of outlet gates: pneumatic and Miner
Etched walkways
Spare hatches included in polybag to let modeler modify for different era
Full end cage details
Accurate paint and lettering
Multiple road numbers available for each scheme
Evergreen Scale Model Opaque White Polystyrene Strips 14in .010x.020 (10pcs pkg)
HO GE 44 Tonner Phase IV Body - DC/DCC/Sound - Undecorated
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
Volume: 100ml
Cleaning solution designed for removing acrylics from brushes and airbrushes.
It can also function as a lubricant when you want to leave and rest your airbrush for a couple of hours and want to keep the needle clean
Ballast - Medium Buff - Shaker (57.7 in3)
Use ballast and coal for any scale to model realistic railroad track, gravel roads, crushed rock and stones, hopper loads, and coal piles. Available in several colors and sizes, you can mix and match for a superior realistic effect. Ballast and coal are lightweight and easy to use. Watch the Woodland Scenics video about how to apply it and attach with scenic cement!
ALLERGY CAUTION: Ballast contains tree nut by-products.
HO 1950s Sedan - Police
MODEL FEATURES:
- Factory assembled with detail parts applied
- Molded interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
- Beacon or taxi sign where appropriate
HO GE AC4400CW - DCC & Sound - Quebec Cartier Railway QCM #19
Detailed Information
QCM FEATURES:
Medium plow
Low mount number boards
Walkway mounted ditch lights
Mid/late production units
Long hood mounted red beacon
5-chime horn
GE style self-steering trucks
The Quebec Cartier Railway (QCM) operates approximately 260 miles of track in the Canadian province of Quebec hauling large amounts of Iron Ore. Known for their fleet of Alco locomotives, QCM turned to GE for a small batch of new AC4400s beginning in 2001 to replace their aging Alco fleet. A unique feature of these units is a red beacon mounted on the long hood which operates in the cold weather climates to warn against possible freezing coolant.
AC4400CW SERIES LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
HO EMD SW1200 - DCC/Sound - Grand Trunk #1514
(Flexicoil Trucks)
The HO Scale Rapido SW1200 features:
- Designed from original blueprints and field measurements
- Heavy diecast frame, chassis and gearboxes for superior pulling power
- Rapidos renowned silky smooth-running drive system
- Working cab interior light and inspection lights
- Fully detailed Type A or Flexicoil trucks, as appropriate
- Full cab interior with working cab interior light and non-working fire extinguisher and fridge (where appropriate)
- Working headlights and illuminated number boards at both ends
- Some models have a rotary beacon or flasher/strobe as appropriate
- Separate handrails, including crash bars inside the cab
- Multiple exhaust stack and battery box door styles
- With or without working drop steps, as appropriate
- Incredible underbody piping and conduit detail - a Rapido hallmark!
- DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings from a 567 prime mover
HO Code 83 Nickel Silver DCC Friendly # 4 Turnout - Left Hand
Track is the most important model on your HO Scale layout, and WalthersTrack makes it easy to create realistic mainlines, sidings and more with Code 83 rail!
Combining great looks and great performance in a complete system, each item comes fully assembled and features:
-Thin profile ties in realistic dark brown with enhanced wood grain detail
-Fine profile molded spike and tie plate details on each tie
-Spike-mounting holes positioned next to the rail
-Molded starter points on underside of ties for fasteners
-Custom formulated nickel silver rail for outstanding electrical conductivity
In addition to these details, each DCC-friendly Code 83 Turnout features:
-Snap-action points
-Solid rail points for better conductivity
-Isolated frogs with built-in jumper for powering as desired
-Current jumpers entering and leaving the frogs
-Insulated tie bar
HO NSC 64 Ft 6000 Cubic Gondola HS - MWCX #102820
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
OVR 6500 HO Pipe Loads
These pipe loads are perfect for our OVRTRAINS FCA 52ft Bulkheads!
NOTE:
1 package of loads will do 2.5 cars.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140089
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Coarse Turf - Light Green - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
HO RTR 68Ft Railgon Gondola - BNSF #518561
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
HO 40Ft PS-1 Boxcar - Lake Superior & Ishpeming #2450
Date: BLT 8-58
Description:
All are Ready-to-Run
Laser Sharp Painting and Printing
33inch InterMountain Metal Wheelsets
Metal Knuckle Couplers
-Minimum Radius - 18inch
Plastruct Angle ABS 5/16
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark - 6pkg #3
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO Ford C Box Van - Rio Grande
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Rubber tires
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Trailer Train #91913
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
20Ft Corrugated Containers with Corrugated Doors, Safmarine 2pk
707424(8) and 77792(9)
HO Scale 1980-1985 Chevrolet Impala Sedan - Assembled - Taxi
The Rapido Chevrolet Caprice and Impala cars feature:
Both Wagon or Sedan carbodies
1980s body style designed from photos and drawings
Multiple front grille designs covering the entire 1980s
Real rubber tires (and white walls too, where appropriate)
Multiple rim designs (wire spoke, dog dish and more)
Realistic chrome finish on bumpers, rims and more!
HO 19,600 Gallon Tank Car - Tate & Lyle (Repaint) #51043
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Date: BLT 3-98
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1811
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO RTR PS-2 2600 Covered Hopper - MKT #1333
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
HO 13,600 Gallon Acid Tank Car - Union Tank Car/White (UTLX) (3pkg)
ETA: July 2023
Road Numbers: 11377, 11781, 11760
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
HO Gas Station Details - Kit
Product Information
Add lots of life to a gas station, service facility, garage, convenience stores and many more with the Cornerstone(R) Gas Station Details kit! Designed for easy assembly, it includes:
Terrific value, set includes:
Two styles of small pump islands, with or without safety bollards
Gas pumps
Oil can display racks
Air compressor
Tires and display stands
Soda vending machine
Ice machine
Molded in white plastic - easily painted and detailed
Quick and easy add-ons for Als Victory Service (933-3072), 24-Seven Quick Mart (933-3477) and more, each sold separately
SD70MAC Diesel, w/ DCC & Sound - CSX #4547
Era: 2016+
EMD SD70MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
First time ever with front and rear Rubber MU hoses, Trainline hoses, Cut levers, and rear Spare
CSX FEATURES:
CSXs latest -Boxcar- scheme. Simplified cab roof antennas. Rear pilot mounted spare knuckles. 4526 and 4547 are ex CSX 725 class and 4577 and 4579 are ex CR 4130 class.
LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PROTOTYPE SPECIFIC INFORMATION
During the early-1990s, EMD teamed-up with German engineering company Siemens to produce a freight locomotive that was capable of providing AC-traction drive currents, and thus providing a high-horsepower rating and lower fuel consumption for railroads which had an ever-increasing demand for saving fuel consumption by using a lesser amount of units to haul most of their trains.
The EMD SD70MAC was first introduced in early 1993, and began production later-on during the same year after numerous tests and improvements were made. Since then, the EMD SD70MAC has been a staple of heavy freight lines across the country.
HO GP9u - DC/Silent - CP - Multimark : #1614
- First ever accurate model in plastic - often imitated, never exact!
- Long service lives, 1980s+, all throughout Canada and the US
- Powered slug with traction motor sounds and flashing beacons
- Heavy diecast frame with super detailed piping and traction cables
- Detailed Blomberg trucks (Later series have rotating bearing caps)
- Traction motor details on gearbox
- Working track lights, class lights, control stand lights
- Metal side handrails
- Working ditch lights on prototypically appropriate road numbers
- Front and rear plows, plates or footboards on appropriate road numbers
HO Scale GP38 - DCC & Sound - Santa Fe (Yellow Warbonnet w/ Class Lights) #2321
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
N Scale Allied Rail Rebuilders - Kit
Product Information
Performing everything from painting to complete rebuilds, the prototypes for the Walthers Cornerstone Allied Rail Rebuilders kit captures the realism of these large buildings in a size that works on most layouts. Lots of details are included, such as an EMD 567 prime mover, separate roof vents, interior trusses, doors and windows. Allied Rail Rebuilders is typical of brick industrial and maintenance shops and is ideal for other types of heavy industries.
Great for steam or diesel-era layouts
Brick main building with clerestory
Rooftop smokestacks
Detailed interior trusses
EMD 567 prime mover
Molded in appropriate colors
Realistic decals
High Self Adhesive Daffodil Tuft Strips - 4mm (10 strips)
10 4mm high self adhesive daffodil tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.
Sterling Salt #48921
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
GMD SD40-2f - DCC & Sound - CP (Round Porthole Sill Dashes) #9018
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
HO 40ft 16K Gallon Tank Car - Tru Sweet/UTLX #75848
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Spray Can - Dark Green JGSDF (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO SD75M Diesel - DCC & Sound - SF/Warbonnet #240
Detailed Information
ATSF features:
These were some of the last Santa Fe lettered engines built before the BNSF merger
SD75M body with turbo -bulge-
Early dynamic brake grills
Nathan 3 chime horn
Two grab irons on cab roof
Tinted cab windows
Right side nose door without window
Short sunshade brackets
Large and small Sinclair antennas
SD75M 4-step walkway
Spare knuckles and holders on rear pilot
Drop grab irons (MU hose holders) on rear pilot
Low-tab mounted AEI tags
Early jacking pads
Front round top ditch lights
EMD low plow
MU receptacles w/ yellow MU cables front and rear
Late 5000 gallon fuel tank
Stem-mounted fuel gauge and late sight glass
Locomotive features:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Sound equipped models also feature:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Spray Can - Dark Green (RAF) (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
HO 50ft Ext-Post Hi-Cube Plug Boxcar - CRLE #119719
MODEL FEATURES:
- Separately applied brake wheel and stirrups
- Highly-detailed, injection-molded body
- Metal wheels with RP25 contours operate on all popular brands of track
- Minimum radius: 18 inches
HO FMC 4700 Covered Hopper - UNPX #121061
MODEL FEATURES:
- Separately-applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, -brake cylinder and triple valve
- 100-ton trucks with 36 inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
- Factory applied roof walk, roof hatch, end details, ladders, and wire grab irons
- Two outlet grate variations
- Accurately painted and printed on a highly detailed, injection molded body
- See-through etched metal end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- All 3-packs feature unique road numbers
- Minimum radius: 18 inches
HO Canadian National Diesels (1995+) - Hoods & Switchers - Decals
Circa: 1995+
Scale: HO Scale
Equipment Type: Diesel - Hoods & Switchers
Description: Canadian National Diesels (1995+)-Diesel - Hoods & Switchers - Waterslide Decal
HO EMD SD60M - DCC/Sound - Soo Line #6059
FEATURES:
- Limited edition - one time run of these roadnumbers!
- Prototypes in service 1989 to the present in main line & regional service
- First SD60M safety cab with three-piece windshield
- Open grating on steps
- Available with ESU Sound & DCC for DCC & DC layouts featuring:
4 Function outputs with brightness control by CV
Fully DCC Compatible
14, 28, 128 Speedsteps
Dual Mode DC/DCC
4 Air Horns changeable by CVs
2 Bells Changeable by CVs
Full 8 Notch Prime Mover Sounds
Compressor
Dynamic Brake
Multiple realistic lighting effects
21-pin DCC plug
- Same powerful drive as WalthersProto(R) locos featuring:
5-pole skew-wound motor
14:1 gear ratio
Helical-cut gears for quiet operation and easy multiple unit operation
All-wheel drive and electrical pickup
Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant & directional LED headlights
- Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately
- RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
HO B-50-15 Boxcar - As Built w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #15245
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
N Scale Just Plug Lighted Vehicle - Fancy Fins
Ready for the drive-in, Fancy here loves date nights!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic. Add a vehicle to a Just Plug light hub for easy installation. Just plug and you are done!
20mA per Vehicle
Switch 8 Mk2
For use with stall motor machines only. Control for eight Tortoise by Circuitron switch machines. Remembers position of switch during power outages. Supports full range of Digital Command Control accessory decoders (1-2044). Button board for local push button control available separately.
HO Greenville 86Ft Double Plug Door Box Car - C&O/Chessie (Delivery 10-1977) #493129
- Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
- CNC-Machined 36 Inch Wheels
Chessie System (C&O) Delivery 1978 is our first Chessie C&O offering in the Greenville world and of course we had to make a big splash with this scheme. This C&O order is huge ? 275 cars were delivered in October and November of 1977. They feature the late Greenville phase details with 5 grab irons at the left and right corners of the body. With that fantastic Chessie C&O blue, white excess height end painting, and galvanized silver roofs, they are sure to stand out on your layout. The cars include exact and accurate Chessie C&O data, as applied by Greenville, including metric units! This model features body-mounted brake rods, Gypsum-style crossover platforms and 100-Ton Low Profile Barber S-2-C Roller Bearing Trucks with accurate rotating Timken caps. This is a big and prototypically-relevant series of cars. SKUs -01 through -06 have October 1977 build data and SKUs -07 through -12 have November 1977 build data. Chessie fans, who loves you?!
HO RTR 70 Ton 2-Ballast Hopper with Side Chutes -Wisconsin & Southern
#134
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
Russell Snowplow - Ready to Run - Grand Trunk Western #55461 (red, black)
Product Information
Take on winters worst with a WalthersProto Russell Snowplow on the job! In service since the 1920s, all-steel plows like this are a must have for railroads big and small, and look great spotted on a siding or near the engine shed during the warmer months too! Completely retooled and superbly detailed, each HO Scale model features:
Limited edition - one time run of these roadnumbers!
Prototypes in service 1920s to present
Fully-assembled, railroad ready - undecorated kit also available
Factory-installed grab irons
Complete underbody w/brake gear & piping
Custom front truck for tighter curves
Detailed flanger
Thin profile stirrups
Window -glass-
Ultra-Smooth rolling metal axles and 33inch wheelsets
Proto MAX(TM) metal knuckle coupler on rear of plow
Railroad-Specific Details:
See-through -steel- or original -wood- running boards
Sturdy hinged & positionable side wings in two styles w/wire cross braces
Fitted w/original or one of three styles of late headlights as appropriate
Bettendorf or roller bearing rear truck
New York Central (silver, black)
Bridge Billboards for your Layout
Railroads once considered bridges as locations to fly the company flag, so many painted them with logos and billboard advertising. These plate-girder bridges are based on those used across the continent and each comes decorated with period railroad graphics. The layout-ready models also feature nickel-silver Code 100 rail
HO Scale 50Ft PC&F Ext Post w/10ft-6inch Plug Box - HPJX #90250
Detailed Information
GENESIS FREIGHT CAR FEATURES:
Fully-assembled and ready-to-run out of the box
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Trucks with animated rotating bearing caps
Machined metal wheels
Wheels with RP25 contours operate on all popular brands of track
Weighted for trouble-free operation
Body-mounted, McHenry operating scale knuckle couplers
Separate wireform grab irons, etched metal coupler platforms, and/or etched metal roofwalk
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Replacement parts available
MODEL FEATURES:
New road numbers and paint schemes
70-Ton roller bearing trucks with operating bearing caps
Fully-detailed full cushion underframe, where applicable
Era: early 1970s to present
Separately applied door closure rods, side ladders, metal grab irons
Minimum radius: 18inch
and etched metal end platforms
Recommended radius: 22inch
40Ft Corrugated Container Uniglory 2 pk
8159858(1) and 816309(3)
HO 53ft Singamas Corrugated-Side Container - Canadian National
(white, gray, red, Worldwide Logo)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes
HO 26Ft Can-Car Dry-Van Trailer - Canada Cartage #8H0375
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
HO 1988 G43B Coil Svc. Gondola w/ Coil Racks (Coils Not Included) - Conrail (CR) #601888
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
Conrail (CR) -1988 G43B Coil Svc.- With Coil Racks ? Coils Not Included in the now-classic Conrail red paint. This series represents the former PC-painted G43B series. Conrail maintained the lettering locations that PC did, painting the Conrail reporting marks, road number, and Conrail can opener logo in the same locations PC had stenciled them. The G43B prototype features cushion draft gear, giving the model a distinctive look compared to the other G43 classes. The top chord of the car has a -COIL STEEL LOADING ONLY- stencil to remind customers and railroad officers that the car is equipped with coil racks. Our model has coil racks too, and we sell beautifully executed steel coils for this car separately. We recommend a load of four coils if you want to replicate most prototype loading patterns ? for the size of coil we created. Yes, we did the math. These Conrail coil service gondolas are offered in 12 road numbers and feature details appropriate for these 1969-built cars.
CR #892129
MODEL FEATURES:
Round hatches or trough hatches
Painted and printed for realistic decoration with multiple road numbers
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Separate brake wheel
Weighted for trouble free operation
Machined metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
The 4-bay covered hopper first entered service in the 1960s. The cars handle loads such as diatomaceous earth, plastic pellets and similar bulk commodities. In the 1960s, American Car and Foundry introduced the Center Flow design. The Center Flow relies on the cars rounded body to provide structural strength without the added weight of bracing, as well as making gravity unloading easier. This 4-bay car came in a 5,250-cubic foot capacity.
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #18
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Beilhack Rotary Snow Blower BNSF
Self propelled Beilhack snow blower of the US-American BNSF Railway.
Mold variant!
Model with many digitally switchable functions: Lifting and lowering of the snow cutter, rotating blower wheels, entire vehicle platform can be turned 180 degrees, LED lighting and sound equipment from factory.
With long superstructure, the improved snow cutter, the headlamps as well as the Ditch-Lights
HO 60ft PS Auto Box - Norfolk & Western/NW #600410
MODEL FEATURES:
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Fully detailed full cushion underframe
- Full underframe detail: air brake reservoir, control valve,
- Separately applied door closure rods, side ladders, metal grab irons and brake cylinder with plumbing and brake rod details
- etched metal end platforms
- 100-Ton roller bearing trucks with operating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Machined metal wheels
- Weighted for trouble free operation
- Multiple road numbers
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
During the 1960s, Ford Motor Company, Pullman Standard and Santa Fe pooled their resources to develop a standard boxcar to meet the transportation needs of automobile manufacturers in the United States. Delivered in 1965, the Pullman Standard auto parts boxcar is the most prolific example of this type of freight car. It ultimately changed the face of automobile manufacturing and rail transportation.
PRIMED FOR GRIME MODELS FEATURE:
- Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Some Prime for Grime models feature paint scheme variations.
HO B-50-15 Boxcar - As Built w/ Murphy Roof - Southern Pacific (1931 to 1946 scheme) #14520
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
HO GP9 DCC Ready - Toronto, Hamilton, & Buffalo #401
ERA: Early 1960-1970s
THB FEATURES:
-Steam Generator Intake & Exhaust
-Long hood nose mounted bell
-Separate ACI plates included
-Roof mounted air tanks
TH&Bs 3 steam generator equipped GP9s began service in 1954 and effectively vanquished steam on this small Canadian railroad. Their time in passenger service was relatively short and they served out their time in freight service all the way into the CP Rail era.
LOCOMOTIVE FEATURES:
-Trainline and MU hoses
-Coupler cut levers
-Drop steps unless noted
-MU stands
-Nub style walkway tread
-Bell placement & type per prototype
-Fine-scale handrails for scale appearance
-Wire grab irons
-Lift rings
-Windshield wipers
-See-through cab windows and full cab interior
-Etched metal radiator intake grilles and fan grilles
-Air tanks mounted below sill unless noted
-Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
-Blomberg-B trucks with appropriate bearing caps
-Sander lines
-Speed recorder unless noted
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately-painted and printed paint schemes
-Body-mounted McHenry operating scale knuckle couplers
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
-All-wheel drive with precision gears for smooth and quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-Bidirectional constant LED lighting so headlight brightness remains constant
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds the model for safe storage
-Replacement parts available
-Minimum radius: 18in
SOUND EQUPPED MODELS ALSO FEATURE
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
Ultra Fine Red Sable Brush - Size 10/0
HO Gunderson 6276 50Ft Plate F Boxcar - TTX (2016) #506832
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
HO GE Dash 9-44CW - DC/DCC Ready - Canadian National CN #2506
CN FEATURES:
Canadian 4-window cab with high-mounted number boards
K3 horn
Front ditch lights
Front class lights
Rear single style headlight
Cab-mounted brass bell
Canadian National purchased 23 safety cab Dash 9 locomotives from GE in late 1994. Classed as -C44-9WL-, these locomotives were seen all over the system and featured a 4-window Canadian style cab, front and rear anticlimbers, and single rear headlight.
ROAD NUMBER SPECIFIC FEATURES:
#2506 Later appearance with right side yellow number board numbers and missing left side -American Continent- map art
#2510 As-delivered appearance
#2522 As-delivered appearance
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO Modern Furniture Factory
Perfect as a smaller freestanding operation or part of a larger manufacturing plant, you're sure to generate new business for your HO railroad with the Modern Furniture Factory kit! This detailed structure is perfect for contemporary layouts, and features:
-Contemporary design - adaptable to all types of industry
-Typical of steel buildings constructed from the 1970s to the present
-Two-story main building w/front office, truck and rail car loading/unloading areas
-Separate lumber storage building with interior racks
-Large dust/sawdust collector
-Parts to build detailed electrical transformer, vents and four roof-top air conditioners included
-Separate doors and windows
-Molded in Light Ivory, Concrete, Medium Gray and Light Gray, with clear acetate
Measures:
- Main Building: 15-3/8 x 10-1/2 x 4-1/2in 39 x 26.9 x 11.3cm
- Lumber Storage Shed: 9-3/4 x 4-1/2 x 2-3/4in 24.6 x 11.4 x 6.9cm
- Dust Collector: 1-5/8 x 1-5/8 x 5-3/16in 4.1 x 4.1 x 13.1cm
HO Scenic Accents - Sitting & Waiting (7pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
This set includes two men, three women, a child and a dog. A mother and her child wait, perhaps for a bus. A dog sits close by. A woman and man sit, engaged in conversation and another man and woman sit close together, just enjoying each others company.
HO Code 100 Rail Flex Track North American-Style Wooden Ties 5 pc.
36 inches 91.4cm Section 1 pc. Nickel Silver Rails
Peco Code 100 track components are based on American Railroad Engineering Association drawings, and have been designed to meet NMRA standards. This line of track is an all-new addition to Pecos dependable and durable track systems.
Peco Streamline Code 100 track features ties molded in creosote-colored flexible plastic that mimics the look of the prototype, plus wood grain, tie plate and appropriate spike details.
Use RibbonRail Tools to make radius accurate the first time.
HO Scale G2 AC4400CW - DCC & Sound - CEFX #1020
Detailed Information
CEFX FEATURES:
Nathan K-3 Horn
Late body features
Late radiator lift rings
Evenly spaced rear grab irons
Engine air intake moved rearward
Notched fuel tank
Tank welded to underframe
Long handrail on left jogs over capacitor box
Double rail behind cab on left side
AAR style control stand
Electric air dryer
GE Hi-Adhesion trucks
Outside struts on opposite sides of trucks
Front ditch lights
The CIT Group placed two orders late in the production of the AC4400CW. They represent some of the newest features added to the AC4400CW line before its discontinuation. The first group was purposely built with Union Pacific features to whom they were originally leased. The second group was leased to the Canadian Pacific and share spotting features with late model CP AC4400CWs. Both wear CIT Groups distinctive -Blueberry- scheme with CEFX reporting marks.
ROAD NUMBER SPECIFIC FEATURES:
#1002
GPS Dome
High number boards
#1020
GPS Dome
High number boards
#1048
Sinclair Antenna package
Low number boards
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Excel Hobby Razor Saw Set Handle with 2 blades, Carded
HO Scale Santa Fe Refrigerator Car -El Capitan #34853
RR27 CLM
HO Code 83 Track - Straight Sections - 10-Piece Assortment
2 of each length:
3/4 inch
1 inch
1-1/4 inch
1-1/2 inch
2 inches
2-1/2 inches
Atlas HO Scale Code 83 Snap Track features brown ties and nickel-silver rail. Its perfect for modelers of all skill levels looking for high quality, prototypical-looking track with a near-scale rail height. Brown ties feature molded centerline nail holes for easy mounting with #2540 track nails. Fully compatible with all Code 83 Snap Track and conventional Code 83 track systems. Adapter track joiners #551 are available so you can also use Code 100 track on the same layout if desired. The track geometry of Code 83 track matches that of Code 100 Snap Track, so Code 83 track can be substituted for Code 100 in various Snap Track track plans.
HO GE 44 Tonner Phase Ic - DC/DCC/Sound - Milwaukee Road #992
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
HO Code 83 Nickel Silver Rail 36in (0.9m) (17/pkg)
Each piece is 36 inches (0.9m) long; 51 feet (15.5m) total length.
Perfect for do-it-yourself and custom track projects, WalthersTrack Bulk Rail can also be used with various Cornerstone Bridge kits, available separately.
Other features include:
-Matches rails used on WalthersTrack Code 83 products
-Fits mounting points on Cornerstone HO open deck bridges (sold separately)
-Great for do-it-yourself and custom track work
-Custom-formulated nickel silver rail for outstanding electrical conductivity
HO RTR Thrall Rebuilt 40Ft Well Car - Trailer-Train (DTTX - Maroon Logo) #53347
(yellow, black; Large Maroon Logo)
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
One time run of these roadnumbers, order now - limited quantity available
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
70-ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO ACF 5250 Covered Hopper - Honeymead (ACFX) #56981
Features:
Ready to run
Injection molded plastic
Fine scale detail
Etched metal roof walk
Metal knuckle couplers
Road specific hatch and outlet configurations
Road specific roof walk variations
Three body style variations
Separately applied wire grab irons and wire brake lines
Crisp painting/printing
Free-rolling 100-ton trucks
HO 60ft NSC 5150 3-Bay Covered Hopper - Union Pacific #90707
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO ICC B&O I-18 Steel Bay Window Caboose - Chessie System (B&O Raceland Repaint 1981+) #C-3005
Product: ICC B&O I-18 Steel Bay Window Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Gould Caboose Roller Bearing with separate brake beam part
Wheels: CNC-Machined 33inch Wheels
DC/DCC Lighting Features: Interior Lights (Dim!), -Box- marker lamps and Red FRA flashing end light
Chessie System (B&O) (Raceland Repaint 1981+) illustrates one of the I-18 cabooses that received new paint. While this caboose had been previously updated with Chessie-style fixed -box- markers, replacing the small silver Pyle lanterns, as well as a new FRA-approved Star Model 845-F Incandescent Flashing end light, in 1981, the C&O Raceland, Kentucky, shops repainted caboose C-3005 with a fresh coat of yellow. Check out the details of this 1981 Raceland paint job, including the silver smoke jack, silver area under the roof eaves, and distinctive C&O style -3- in the 3019. Notice the slightly lower Chessie cat, since the ACI label is no longer present, and of course, correct COTS lettering per the prototype. Lighting features include prototypically dim interior lights, lit box markers, and red flashing end lights. The FRA flashing red end light is worth noting ? it has the correct flash rate and decay of the real thing. No -generic- LED flash here!
Double-Ended Pin Vise - With 2 Double-Ended Collets
The Zona Double-Ended Pin Vise comes with two double ended collets with 0inchp.109inch or 7/64inch (0 p2.7686mm) capacity range. 3-7/8inch overall length. Four chuck sizes for drills, miniature reamers, files and small tools: 0 p.05inch, .03 p.08inch, .05 p.10inch, and .07 p.11inch.
Tangent Scale Models HO PS4750 Covered Hopper ROCK -Delivery Blue 6-1978
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ROCK -Delivery Blue 6-1978- is available in the Blue Original 1978 scheme. Our -R- black and white logo and blue color is stunningly executed, check it out for yourself. ROCK lettering done right is something to behold, with accurate data stencil breaks and careful duplication of ROCKs data style. This is Tangent-accurate hand-drawn artwork. We have also matched the 1978 ROCK details including body-mounted brake center sill linkage, Miner outlet gates, a Universal hand brake and matching Universal brake wheel.
HO Delivery G43A 2-1968 Gondola - Penn Central #576027
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inchh Wheels
PC -Delivery G43A 2-1968- in the original Penn Central green paint scheme, and a PC version we have not yet offered! These gorgeous models have 2 placards in place for the PC reporting marks, road numbers, and ACI label on the left side of the car. On the right side is an additional placard that includes a PC logo and Penn Central lettering. These placards are utilized on this class of PC car since these cars have side corrugations on each panel, where they knew that putting paint on the corrugations would not last very long! These cars have corrugated ends, and the Tangent replica includes oxide red car interiors ? on the interior walls and ends ? like the prototype. We even duplicated the slight green overspray on the inside end corners! The 100-Ton trucks feature accurate rotating -Timken- caps.
HO Bi-Level Auto Rack - Transportación Ferroviaria Mexicana (TFM)/TTGX Flat Car #987753
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO RTR ACF 2970 Covered Hopper - Winchester and Western (W&W) #4508
Detailed Information
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
MODEL FEATURES:
Round or trough hatches
Photo-etched metal roof walk
Separately applied wire grab irons and stirrup steps
Detailed outlets
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple road numbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Separately applied brake wheel
Machined metal wheels
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
60ft Pullman-Standard Flatcar - Ready to Run -- Illinois Terminal
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
N Scale ACF 4600 3-Bay Covered Hopper - DT&I #10311
MODEL FEATURES:
- Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
- Round or trough hatches
- Photo-etched metal roofwalk
- Separately applied wire grab irons and stirrup steps
- Detailed outlets
- Multiple roadnumbers
- Fully-assembled and ready-to-run out of the box
- Accurately painted and printed
- Highly-detailed, injection molded body
- Separately applied brake wheel
- Screw mounted trucks
- 100-ton trucks with 36 inch machined metal wheels
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Minimum radius: 9-3/4 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Dash 8-40CM - DCC Ready - BC Rail: R/W/B w/ Frame Stripe #4612
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
HO Scale 89ft Channel Side Flatcar - Trailer-Train/KTTX #154838
(yellow, black; Twin 45ft)
Built especially for the bigger trailers entering service in the 1960s, this Walthers Mainline model of the 89ft channel side flatcar is a must for period intermodal modeling in HO scale. Based on the F89F flatcars owned by Trailer Train and many railroads, over the years these cars carried 28, 40, 45, 48, and 53ft trailers.
FEATURES INCLUDE:
- One time run of these road-numbers, limited quantity available!
- Heavy die-cast metal underframe for great performance empty or loaded
- Used in piggyback and other service 1963 to the present
- Prototypical C-shaped steel channel side sills
- Detailed brake gear
- Swinging coupler pocket for 18 inch radius curves
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Scale NSC 73Ft Centerbeam Flatcar - BC Rail #730436
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
HO Union Station - Kit
19-3/4 x 8-1/4 x 7 inches
(49.3 x 20.6 x 17.5 cm)
-North American Prototype
-Ornate front entrance with realistic cut-stone wall detail
-Fits steam or diesel-era layouts from the 1900s and beyond
-Realistic decals
-Realistic columns, canopies and non-working clock detail
-Easy-to-build plastic kit
-Molded in appropriate colors
Two-Story House w/Garage
N Scale J. Franks Grocery - Built & Ready Landmark Structures - Assembled
Product Information
Modeled after the independently owned grocery stores that began sprouting up in the early 1900s and that can still be seen today in cities and small towns throughout America. Details and accessories include loading dock with dolly, large display windows, awnings, kiddie ride and more. The building features window treatments and you can add lighting to accentuate the included printed interior.
HO GP9RM Mother & Slug - DCC Ready - Canadian National (Early) #7236, 237
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
The GP9RM Slug features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks with outside brake shoes or Flexicoil trucks
Traction motor details on gearbox
Detailed walkway tread
Metal side handrails
Footboard pilots or curved plate pilots on appropriate road numbers
Working head lights
Both models are available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO Scale Coupler Box Covers - For Athearn Rolling Stock pkg(12
HO 50Ft PS 5277 Box - Lake Superior and Ishpeming LS&I #2708
MODEL FEATURES:
Single 10Ft Pullman Standard door
Separately applied grab irons, end ladders, and brake wheel
Photo-etch coupler cross-over platform
Machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO 19,600 Gallon Tank Car - Tate & Lyle (Repaint) #51251
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Date: BLT 3-98
N Scale 3230 Covered Hopper - Chicago Freight Car (CRDX) #3100
Features:
- All new tooling
- Ready to run
- Injection molded plastic
- Fine scale detail
- Etched metal roofwalks
- Crisp painting and printing
- Magnetic couplers
- Metal wheelsets
The Trinity 3230 Pressure Differential (PD) covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
Tangent Scale Models HO Conrail PC Samuel Rea Shops 4600 Covered Hopper
Product: PC Samuel Rea Shops 4600 Covered Hopper System
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps
Wheels: CNC-Machined 36in Wheels
Conrail (CR) H51C -Quality Gray Repaint 1992- replicates the 1990s-2000s look for the 400-car H51C class. Conrail repainted many cars in their Conrail Quality scheme, and we think the SRS 4600s look particularly sharp! This CR car has later-era gravity gates, replacements for the original Youngstown gates. The car body is equipped with body-mounted brake hardware with center-tube linkage. Sam Rea built the car with a ribbed roof hatch, a low brake housing and a side-mounted train air line the length of the car, all features that are present on this Tangent replica. The B-end has as accurate Ajax hand brake, modern brake wheel, and a replacement Morton crossover walkway. Check out those gorgeous 100-ton Barber S-2 trucks with proper body-style brake beam and rotating Timken caps! This Conrail Quality H51C is painted in light gray with black graphics for the 1992+ era. Look in the upper right corner, and you will notice the ex-PC car number! RTR Conrail Quality and ready to work on your railroad.
N Scale Barber Roller-Bearing Freight Car Trucks - w/ Medium Extended Couplers (1 Pair)
Product Information
Micro-Trains(R) trucks feature detailed sideframes molded in durable engineering plastic.
Athearn - HO RTR PS-2 2600 Covered Hopper -Winchester & Western - #4013
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
HO Greenville 86ft Double Plug Door Box Car - B20 Repaint 1989+ Norfolk Southern #868191
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: October 2021
Norfolk Southern (NW) B20 Repaint 1989+ offers one of our most requested schemes for this boxcar, a Norfolk Southern option. These cars were painted in NS brown paint in 1989 complete with the NS logo stenciling in white. This 1965-built Greenville group features accurate Center-of-Car Cushioning details, a Hydra-Cushion cylinder and truck mounted brake hardware. The B20 class rides on 70-Ton Barber S-2A Roller Bearing Trucks, with 33inch wheels and accurate rotating -Timken- roller bearing caps. As a reminder, N&W was the largest original purchaser of Greenville 86ft auto parts boxcars from multiple eras, and these cars literally went everywhere. These beauties are available with six road numbers!
Strolling Figures 6 pcs
70-Ton 14-Panel 3-Bay Hopper - Ready to Run - Detroit & Mackinac #5433
Bowser HO Scale ready-to-run 70-Ton 14-Panel 3-Bay Hoppers are based on typical cars used by many railroads across the continent for hauling coal and aggregates. These layout-ready cars feature accurate decoration, molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton 14-Panel 3-Bay Hopper is a great addition to your 1950s and later diesel-era car fleet.
HO G2 SD80MAC - DCC Ready - Conrail #4108
Detailed Information
CR FEATURES:
As-delivered paint scheme
Front and rear operating red marker lights
Leslie 3-chime horn
Small EMD front plow
Pilot mounted front ditch lights
In 1995, Conrail placed an order for 30 SD80MACs, being the sole original purchaser. They were painted like the then-recently delivered SD70MACs. This would end up being the last new locomotive order CR would place before they were split up between CSX and NS in 1999.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
HO Bi-Level Auto Rack - Southern Rack/TTX Flat Car #941972
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO 150Ft Pratt Truss Bridge
Single-track bridge features a removable upper truss, premolded bridge ties and extra-long girder components. Ties accept Code 70 or 83 rail, easily modified for Code 100 rail.
Kit - 20-5/8inch 52.5cm
Assorted Crates, Barrels & Sacks (Unpainted Metal)
Detail your layout with this assortment of oil drums, crates, barrels and feed sacks. These are great at trackside or leaning up against sheds, houses, barns and more. 13 pcs/pkg
1947-55 32Ft Fruehauf Aerovan w/ Mayflower Decals - Unpainted and Resin Cast Kit
HO Duplex Sleeper - CP - Royal Canadian Pacific - #110 / H.B. Brown
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
Evergreen Scale Models - Opaque White Polystyrene Rectangular Tubing .188In x .312In x 14In (2 pcs pkg)
Tru Color Paint - Acrylic - Santa Fe Red - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO F30D 50Ft TOFC Flat Car w/ Trailer - Pennsylvania PRR (Delivery) #475343
--Trailers will be chosen at random from appropriate schemes
The Rapido Trains HO scale F30 Flatcars features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Rapidos semi-scale couplers
Full brake rigging
Separate grab irons
HO RTR 53Ft Rivet Side RoadRailer Trailer - Norfolk Southern (Triple Crown) #460003
Rivet Side Large Triple Crown Norfolk Sou.
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
Micro Engineering HO Scale Flex-Trak Code 55 Non-Weathered 6 pcs, 18 ft
Flex-Trak features scale size ties, tie plates and spikes, irregular tie spacing, natural brown tie color and nickel-silver rail.
Expansion Track -- 8-3/8"-9-9/10" 212-252mm
26Ft Fruehauf Pennsy Trailer - Unpainted and Resin Cast Kit
Evergreen Scale Models - Opaque White Polystyrene T Shape .073In x 14In (4 pcs pkg)
HO Scale CM&Q GMD SD40-2F #9024
Ready To Run and Detailed. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, operating class lights, window glass, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC, DCC/Sound version features LokSound Select decoder.
Peco - 6mm Static Grass - Summer Grass (20g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
20 Amp Power Supply 13.8-23 VDC
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140096
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
CN & CP Diesel Drop Step (2pcs)
HO & N Scale Terminal Joiners (1 pair)
Feeds power anywhere on a layout without the need for an additional track section.
HO 1955 Ford F-100 Pickup - Union Pacific #PT168
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Rubber tires
HO HM1 Basic Oval With Power Pack - Track Set
Enjoy DC and DCC!
Our HO Track Sets are only the beginning of your HO scale Unitrack layout! Experience the snap-together reliability and convenience of Unitrack while enjoying the realistic appearance and texture of the molded roadbed. Each set can be used as packaged for the simplest of temporary single-track operation, or they can be combined with additional Unitrack sections and turnouts to create a larger and more elaborate configuration. Available in two varieties, the basic Unitrack oval and the more complicated WGH plan set, Unitrack is all set to start your layout right!
Creates a basic oval made from 26-3/8 inch radius curves and includes both a rerailer and a Kato Power Pack SX for an out-of-the-box operating track set; just add locomotives and cars!
HO Machine Shop Doors & Windows - pkg(8)
As used on the 541-9 Pikestuff Machine Shop kit.
5 large windows. 3/4 x 1 inches.
1 small window. 13/32 x 1/2 inches
1 solid personal door. 1/2 x 1 inches
1 garage door with windows. 1-1/2 x 1-15/31 inches
HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Chinese Red) #5307
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #289
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
HO Bathtub Coal Gondola - MWCX (ex-CP) #100403
Built: 3-06
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
N ACF 4650 cu ft 3 Bay Hopper - Norfolk Southern #251066
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - MRRX #4850
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
10Ft 6In Modified 1937 AAR Boxcar - Southern Billboard #20440
HO EMD GP39-2 - DCC & Sound - CSX/YN3 #4300
Detailed Information
CSX FEATURES:
Ex-RDG
Early phase 1 body
Illuminated number boards
Front and rear ditch lights
5-chime horn
RV style roof mounted A/C
Nose toilet hatch
Correct CSX artwork and colors
Chessie/CSX -mail slot- style battery box doors
CSX purchased 20 ex-Reading/D&H GP39-2s in the late 1980s. They operate alongside CSXs other EMD GPs providing power for locals, haulers, and road switching assignments. Most of the fleet can still be seen operating today.
ROAD NUMBER SPECIFIC FEATURES:
#4300
Front and rear CSX style ditch lights (alternate flash in DCC mode)
small front EMD plow
mixed Hyatt and Timkin bearing Blomberg B trucks with outer brake shoes removed
#4307
Front and rear CSX style ditch lights (alternate flash in DCC mode)
small front EMD plow
mixed Hyatt and Timkin bearing Blomberg B trucks with outer brake shoes still installed
#4311
Front tall EMD style and rear CSX style ditch lights (alternate flash in DCC mode)
small front EMD plow
mixed Hyatt and Timkin bearing Blomberg B trucks with outer brake shoes removed
GP39-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Quonset Hut - Kit
Built by the thousands during WWII, these pre-fab metal buildings found all sorts of post-war uses. Kit includes one complete building and features pre-cut door and window openings.
DIMENSIONS:
24 x 26 x 12 inches
HO Alphabet & Number - Stencil Gothic Railroad - Black - Waterslide Decals
Weathering Powder 1oz (29.6ml) - Dry Mud
Capturing all the energy and excitement of train travel is the Chattanooga. Named for the famous Nashville, Chattanooga & St. Louis Railroad, this 155-piece set includes all the miniature people, buildings, and structures you'll need to recreate the romance of the steam era. View video below to see the set in action.
This ready-to-run train set includes:
0-6-0 steam locomotive and tender with operating smoke and headlight
plug-door box car
open quad hopper
single-dome tank car
offset cupola caboose
body-mounted E-Z Mate couplers
47in x 38in oval of snap-fit E-Z Track, including 12 pieces of curved track, 1 piece of straight track, and 1 plug-in terminal rerailer
suburban station
signal bridge
48 railroad and street signs
36 telephone poles
48 assorted figures
power pack and speed controller
illustrated instruction manual
N Scale ACF 3560 Center-Flow Covered Hopper - Duluth Missabe & Iron Range DMIR #5026
Features:
Prototypical painting and lettering
Plastic body with die cast chasis
Removable coal load
Product Information
The Atlas Trainman ACF 3560 Center-Flow Covered Hopper is based on common steel cars used by many railroads for handling potash, fertilizers, chemicals and more. It features an injection-molded body with applied plastic details where appropriate, smooth paint, crisp lettering and AccuMate(R) knuckle couplers.
HO ALCo RS-3 - DCC Ready - Delaware & Hudson #4075
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
50ft Ext Post High Cube Plug Door Box - Wisconsin Central #1739
MODEL FEATURES:
Former MDC tooling
Brand new paint schemes
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Separate brake wheel
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 18inch
Detroit, Toledo and Ironton - DT&I - #10303
Metal wheel sets and Kadee #5 coupler installed
Date: New 11-73
RTR 60Ft Gundreson Box Car - GACX #14416
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO 53ft Railgon Gondola - Seaboard System #481637
(Patched Ex-Railgon, black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft Railgon Gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
A great addition to your HO freight car fleet, the models feature:
-Based on Railgon 310000 series cars
-Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
-Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
-100-ton roller-bearing trucks
-Correct 36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
N Scale 60ft Boxcar - Union Pacific #960997
Built in June 1977 in a series of 44 cars, this 60ft excess height boxcar with Barber Roller Bearing trucks belonged to class B-100-5 and was serviced in 1982. Union Pacific continues to operate today as one of the largest Class 1 railroads in North America with over 32,000 miles of track.
Evergreen Scale Models - Opaque White Polystyrene Rectangular Tubing .250In x .375In x 14In (2 pcs pkg)
Trainman N Scale 4750 Covered Hopper - Canadian national (IC) #769606
Features
- Weighted body
- Equipped with AccuMate Knuckle Couplers
- Accurate painting and lettering
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Seaboard Air Line #19792
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
N Scale Roof Top Vents - pkg(4)
HO Wood Water Tank - Kit
Product Information
The Walthers Cornerstone Wood Water Tank kit is a typical wooden water tank as used on railroads from coast to coast. Constructed to satisfy steam locomotives thirst for water, this fully assembled and decorated model adds instant steam-era realism to any layout. Appearing early in the 20th century, tanks like this were a fixture of railroad facilities until the last days of steam. Its perfect for busy engine terminals, small town yards and near smaller depots where engines were watered during the station stop. The Wood Water Tank kit features detailed wooden support timbers, positionable spout and ladder details.
As shown the kit measures: 3-1/2 x 3-7/8 x 6-5/8inch (8.7 x 9.6 x 16.5cm)
The Wood Water Tank will be a welcome addition to any servicing scene alongside other Cornerstone railroad maintenance structures.
Detailed wood support timbers
Positionable spout
Easy-to-build plastic kit
Molded in gray for easy painting
Perfect for steam-era railroads
PRR X31A Double-Door Boxcar: Circle Keystone - Automobile - Single Car #69321
Detail Variations:
Built 1934-35, as operated to approx. 1954.
6-pack includes the following numbers:
#69005
#69177
#69308
#69321
#69379
#69402
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
HO ET44 Tier 4 - DCC Equipped - CN/100th Anniversary #3221
Road number 3108 Has a black cab roof; does not have the circle graphic on the nose
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
40Ft Corrugated Container Beacon Horizon Lines 2pk
3309629(2)/309688(3)
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1783
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO 5820 Covered Hopper - Procor/UNPX (Union Carbide) #122044
Era: November 1977+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
NYC Cab Signal Box - Unpainted
Commonly used on passenger service RS-3s.
Plastruct 90172 Butyrate Half Round Profile 1/4 (4pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
GRAY
OUTSIDE DIAMETER (O.D.)
1/4
6.4mm
INSIDE DIAMETER (I.D.)
1/8
3.2mm
THICKNESS IN INCHES
1/16
THICKNESSS IN MM
1.6mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
HALF ROUND PROFILES Use for the top housing unit of corrugated roll-up doors, large scale gutters and bannister railings, and decorative trim for inside and outside buildings.
N Scenic Accents(R) Figures -- Shootin Hoops
HO SP C-40-3 Steel Cupola Caboose - Southern Pacific (Gothic Small - With Roofwalk) #1221
Mid 1960s+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
HO Figures - Businessmen (6)
Populate your layout with miniature figures from all walks of life!
HO Dash 9-44CW - DCC/Sound - Union Pacific #9713
UP FEATURES:
- As-delivered 1994 paint scheme
- Modeler-installed GPS dome included for later-era operations
- Leslie RS3L horn
- Large snowplow
DASH 9-44CW SERIES LOCOMOTIVE FEATURES:
- Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
- Etched, see-through walkway steps
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
HO Heavyweight 6-Wheel Metal Passenger Trucks w/RP-25 Metal Wheels - Type 2411 - 1 Pair
Product Information
The prototypes of this truck featured one-piece cast sideframes and were used on a wide range of heavyweight equipment. These trucks fit the Walthers (932-series) Heavyweight 12-1 Sleeper, 14-Section Sleeper and 3-2 Observation (all out of production), but adaptable to many other models. An easy upgrade for new and older HO Scale passenger cars, WalthersProto trucks are fully assembled and ready to use with built-in electrical contacts for car lighting and 36inch turned metal RP-25 wheels.
HO 10 Inch Straight Track Alignment Gauges
RibbonRail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking, and joining rail. Track Alignment Gauges are precision machined to NMRA standards and will work on any code of HO Scale rail. Available in many curve radii as well as straight.
HO Alco RS-3 Phase 1 - DCC & Sound - Erie Lackawanna w/ Large Louvers #920
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. DCC/Sound version features LokSound V5 decoder.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #14093
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO AutoFlood III RD Coal Hopper - PGNX #1100
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
NATO Green Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO Horizon Dinette - Wide - Amtrak (Phase 3) #53504
Details & Specs
Rapido HO scale Horizon cars feature:
- Coach, Dinette and Club-Dinette cars available
- Full underbody detail
- GSI G70 trucks with metal wheelsets
- Accurate painting and lettering
- Constant interior lighting in DC and DCC
- Metal side grab irons
- Full interior detail
HO Alco FA-1 - DCC Ready - Canadian Pacific (Block Scheme) #4010
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO New Look Bus New Orleans Public Service
Destination Sign:
New Orleans
Detail Variations:
Bus-o-rama Panels
Air Conditioner
Left-side Emergency Door
4-window exit door
Early-style engine door
HO Procor 20,000 Gallon General Purpose Tank Car - Sunoco - UTLX / Era: 1974+ - #46439
The Rapido Trains HO scale Procor GP20 Tank Car features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Photo-etched metal walkways
Detailed vent stacks, loading hatches, air tanks and braking equipment
Metal knuckle couplers
Early style features 70-ton trucks with 33in wheels and an exposed drain valve
Late style features 100-ton trucks with 36in wheels and a reinforced drain valve housing
HO 50Ft PS-1 Double Door Boxcar - Detroit & Toledo Shore Line #5207
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-Etched Metal Roofwalk or No Roofwalk Per Prototype
-33inch InterMountain Precision Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO 1937 AAR 40Ft Boxcar - NSC-2 Ends - Canadian National (White Leaf Herald) #485424
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
1956 Chevy 150 Two Door Sedan - Unpainted and Resin Cast Kit
HO Bi-Level Auto Rack - Southern Rack/TTX Flat Car #942396
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX(6 pkg) #5
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Includes Road Numbers:
16000
16019
16027
16051
16071
16084
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Scale Photo Etch Right Hand Semaphore Head Set #1
This fret contains various blades, lantern base and includes a Smash Board blade
SPFE #459898
Fully assembled and ready for your layout
Razor sharp printing and painting
Weighted for optimum performance
McHenry scale knuckle spring couplers installed
Machined RP25 profile 33In metal wheels with RP25 contours operate on all popular brands of tack
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister safely holds the model for convenient storage
Minimum radius: 18In
Medium Oil Premium Hob-E-Lube (14.7 mL)
Significantly reduces the damaging effects of friction on metal to metal, metal to plastic and plastic to plastic. Good protector for metal surfaces. Helps to discourage rust, corrosion and oxidation. Good surface adhesion.
Viscosity: St at 40 degrees Celsius ...68
For use on:
- R/C linkages
- HO and larger scale model railroad side rods, gears, journals and motor bearing surfaces
- Workshop and garden tools, small appliances and casters
- Slot-car pinions and spur gears
- Precision instruments, fishing reels and office machines
Sunny White LED (603 size)
Developed in partnership with Richmond Controls. Lead wires are 13 inches long.
1956 Chevy 150 Four Door Sedan - Unpainted and Resin Cast Kit
HO Trinity 3-Bay Hopper - DJTX (3pk) #2
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO FMC 5503 Double Door Boxcar - Golden West Service #780021
Features:
Double Sliding Doors
Wire grabs
Etched parts
Plate C Box Car
X-Panel Roof
40Ft Corrugated Container OOCL 2pk
OOLU 772604(0), OOLU 773726(0)
HO 4650 Centerflow Hopper BNSF
The Atlas HO Scale ACF(R) 4650 3-Bay Centerflow Covered Hopper is based on cars built by American Car & Foundry (ACF) in the 1960s, with another production run in the 1970s, these large capacity covered hoppers are used to carry grain, salt, dried kaolin clay, sugar and other bulk materials that have to be protected from the weather.
These HO models include etched-metal, see-through roofwalks, detailed brake gear, authentic 100-ton roller bearing trucks with blackened metal wheels and body-mounted Accumate(R) couplers with screw-attached coupler pockets. Undecorated models come with optional parts for three different types of loading hatches and two styles of discharge outlets. ACF(R) 4650 3-Bay Centerflow Covered Hoppers come prepainted and lettered in a variety of railroad-owned schemes with details appropriate for the early (pre-1971) or late (post-1971) production.
Extender Tip (6pcs)
For use over BSIs standard #312 top. Can be used with all thicknesses of CA except IC-Gel.
The flexible tip can be cut to the length and/or inside diameter that is needed for a particular application.
HO 53Ft Railgon Gondola - Chicago & North Western #350070
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft Railgon Gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
A great addition to your HO freight car fleet, the models feature:
-Based on Railgon 310000 series cars
-Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
-Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
-100-ton roller-bearing trucks
-Correct 36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
Gunderson Maxi III Well Car (5-Unit Set) - Ferromex #5019
MODEL FEATURES:
- Fully assembled and ready for your layout
- Weighted for optimum performance
- Razor sharp painting and printing
- Prototypically correct 33 and 38 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
- Body mounted McHenry operating scale knuckle couplers
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- Replacement parts available
- Minimum radius: 18 inches
NCE Decoders -- N14IP - Plug In For ConCor PA1, 4-8-4, etc. 4 Function N Scale
Available with an eight pin plug in. Four function outputs. 1 Amp rating, 1.25 Amp peak. Measures 1.15inch x 0.4inchx 0.12inch.
This is an EPF (extended packet format) decoder supporting:
Silent Running TM motor drive
Torque Compensation for ultra smooth low speed performance
Programmable Start, Mid and Maximum speed works for all speed modes
Motor rating 1.3 Amp continuous, 2 Amp peak (stall)
Four function outputs each with independent lighting effects generators
Select from 15 different lighting effects (Mars, strobes, beacon, flicker, etc)
Lighting outputs can be mapped to different functions
Uploadable speed table interpolated to 128 speed steps
Decoder assisted consisting
Support for all forms of DCC programming
Decoder programming lock mechanism
Brake on DC feature assists automatic train control
HO Jordan Spreader - Wisconsin Central #310
FEATURES:
- One-time run of these road numbers, order now, limited quantity available
- Factory-installed grab irons
- Positionable wings and moldboards can be raised and lowered
- Built tough with durable metal hinges and other details
- Complete underbody with brake gear and piping
- Thin profile stirrups
- Cab window glass
- Railroad-specific details:
- Horizontal or vertical air reservoir
- Original or one of 3 later headlight styles as appropriate
- 70-ton roller bearing or Bettendorf trucks as appropriate
- Single-chime air horn placement
- Ultra-smooth rolling metal axles and 33 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO ATSF PS4750 Covered Hopper - Santa Fe (Delivery Gray 10-1979) #315914
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
ATSF -Delivery Gray 10-1979- is now available in the distinguished light gray paint with light blue -Santa Fe- lettering. This light gray scheme is very different from the previous Tangent ATSF offerings! The Santa Fe GA-905 class were built by Pullman Standard and leased from North American Car Corporation. Check out that sharp red/white/blue NACC badge! Featured details include prototypically accurate body-mounted brake hardware and scale-sized Miner -Selflok- outlet gates. We didnt stop there. This car is loaded with accurate Pullman-applied ATSF graphics and data. From the distinctive narrow style Roman numbers to individual North American Car Corp. car serial numbers on the center sill ? its all there.
85Ft ACF Dome Coach UP Heritage Fleet - Ready to Run - Lighted - Union Pacific, Columbine #7001
(Armour Yellow, gray, red)
Product Information
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
Perfect for fan trip and excursion service
Modern-Era UP excursion scheme
Factory-Printed Car Names and UPP reporting marks
Factory-installed grab irons
Prototypically accurate window tinting
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24inch radius is recommended for operation.
Acquired as part of UPs first big dome order in 1955, Columbine was delivered from American Car & Foundry as Dome Chair #7001 in December, 1954 with seating for 42. The car is named for a UP train that ran between Omaha and Denver.
Evergreen Scale Models - Opaque White Polystyrene Rectangular Tubing .125In x .250In x 14In (3 pcs pkg)
Coarse Turf - Fall Rust - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
HO SD70M - DCC & Sound - PRLX ex CSX #4695
Detailed Information
CSX & PRLX FEATURES:
CSX units are former EMD demonstrators. In a roster increasingly dominated by GE, a group of these venerable units have been sold to Progress rail, returning the units to lease service once again.
Early Cab with nose window
Customer-installed GPS dome included in box
K5LA horn
Spare knuckles on rear pilot
Appropriately-colored MU cables
Early 5000 gallon fuel tank
Large or small snowplow per prototype
Illuminated front ditch lights; flash when horn is activated on DCC and Sound Version
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO GE C36-7 - DC/Silent - Ferrocarriles Nacionales de Mexico #419
The Rapido Trains HO Scale C36-7 is based on General Electric's higher-horsepower six-axle Dash-7 offering, with a 16-cylinder 3,600 horsepower or 3,750 hp rating (compared to the C30-7's 3,000 hp.) Built between July 1979 and February 1989, over 599 total units were produced. Of those, 129 were domestic orders for Conrail, Missouri Pacific, Norfolk & Western, and Norfolk Southern. Another 40 were made for Ferrocarril del Pacifico and National de Mexico. Lastly, 422 were made for China with many significant export differences, and the final units produced were 8 for Comilog in Gabon. Despite smaller production numbers, the C36-7 was ordered at key moments that resulted in it representing the evolution of GE s Dash-7 line more than the popular C30-7s. When GE launched "1977 Series Locomotives" (Dash-7s) in, they cataloged a C30-7, C33-7, and C36-7. Railroads immediately ordered C30-7's for booming coal service. The C33-7 was never ordered. The C36-7 was ignored until 1979, when National de Mexico and Ferrocarril del Pacifico placed orders. These export C36-7s for Mexico were essentially identical externally to C30-7s, which were being built by the hundreds at the time. Ferrocarril del Pacifico's units were repainted into striking two-tone blue FNM paint and worked both freight and passenger service. Of the 40 C36-7s built for Mexico, only one is still in service in 2024 - Ferromex 9336. Incredibly, despite being the last operating C36-7 (among few remaining operating C30-7's) 9336 was repainted in Ferromex's classy "Diet Coke" scheme in 2023. The Rapido model features railroad and era-specific details, etched-metal grilles and details, roadname-appropriate lighting packages and Rapido semi-scale knuckle couplers on both ends. The smooth-running drive features a five-pole motor with dual flywheels, backed up with the MoPower capacitor system for uninterrupted operation. This standard DC model is DCC ready with a 21-pin interface for easy conversion. The GE C36-7 is part of the line of Rapido Trains HO Scale locomotives.
The Rapido HO Scale C36-7 Locomotive features:
Headlights and rear lights
Class lights, marker lights, or ditch lights, where applicable
Step lights
Lit numberboards
Full traction motor casing details
Metal brake chain on engineers side
Detailed underbody piping and conduit
Separate grab irons
Rapidos innovative dead straight metal side handrails with plastic stanchions
Detailed cab interior
Lighted control stand
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Sound-equipped units feature ESU Loksound V5 decoders
HO 1976 Kenworth K100 Aerodyne Sleeper-Cab Semi Tractor - Friderici - Gray, Yellow
This HO Scale 1976 Kenworth K100 Aerodyne Sleeper-Cab Semi Tractor by Brekina is based on the workhorse long-distance semi tractor of the 1970s and 1980s. This rig was popular with truckers and could be seen hauling 18-wheelers from coast to coast. This detailed model features an injection-molded plastic body with fine decoration, interior seats, window glazing and chrome-plated parts as appropriate.
RTR 60Ft Gundreson Box Car - MTNR #175150
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
Kato 176-5625 N Scale EMD SD90/43 Mac Standard DC - Union Pacific #3750
MeticulouslWeighing in at more than 400,000 pounds and with a length in excess of 80 feet and massive 4,300 horsepower tractive effort, the SD90/43MAC is one of the heaviest, longest, and most powerful single diesel locomotives in the world. To date, there have been three production versions of the SD90MAC. The SD90/43MAC was originally designed with a 6,000hp engine in mind, but was fitted with a smaller and more reliable 4,300hp engine that ended up being kept that way by most railroads, even though the option to upgrade to the higher horsepower engine was offered at a later date.
F30A 50Ft Flat Car: Penn Central #701987
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
HO Greenville 86Ft Double Plug Door Box Car - Norfolk & Western (Delivery 1-1978) #861358
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Norfolk & Western (NW) -Delivery 1978- replicates another major player in the world of Greenville 86Ft Boxcars. The NW rostered several Greenville series, but the 1978 order was the biggest. In fact, this 1978 B-138 class of 317 cars was the biggest Greenville order of any railroad. The bold NW graphics are almost understated on a boxcar of this size, but this paint scheme is one example that literally defines modern auto parts trains. The NW cars feature the correct late-Greenville body with 5 grab irons on each side along with body mounted brake gear. Those gorgeous 100-Ton -Low Profile- Barber S-2-C trucks show off the accurate rotating Timken bearing caps. SKUs -01 through -06 have January 1978 data and SLUs -07 through -12 have February 1978 data.
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Union Pacific Rack, Trailer Train Flatcar (TTBX) #963125
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO Holiday Shoppers Wearing Winter Clothes (8pcs)
Bring new life to your layout with ready-to-use Walthers SceneMaster figure sets! Each figure is carefully sculpted with realistic detail and hand-painted (unless noted).
HO Delivery G43A 2-1968 Gondola - Penn Central #576058
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inchh Wheels
PC -Delivery G43A 2-1968- in the original Penn Central green paint scheme, and a PC version we have not yet offered! These gorgeous models have 2 placards in place for the PC reporting marks, road numbers, and ACI label on the left side of the car. On the right side is an additional placard that includes a PC logo and Penn Central lettering. These placards are utilized on this class of PC car since these cars have side corrugations on each panel, where they knew that putting paint on the corrugations would not last very long! These cars have corrugated ends, and the Tangent replica includes oxide red car interiors ? on the interior walls and ends ? like the prototype. We even duplicated the slight green overspray on the inside end corners! The 100-Ton trucks feature accurate rotating -Timken- caps.
N Scale 52Ft Mill Gondola - Wisconsin Central #54196
Detailed Information
MODEL FEATURES:
Body-mounted McHenry knuckle couplers installed
Fully assembled and ready for your layout
Screw mounted trucks for accurate tracking
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - Penn Central
#51508
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO SD70 - DCC & Sound - NS/ex CR Patch #2564
Detailed Information
NS EX CR FEATURES:
Same details as Conrail units below
Aquired by NS after 1998-1999 split of Conrail. Lasted several years before recieving full NS paint
CR FEATURES:
Nathan K5LAR24 horn
CR-specific antennas and conduits on cab and long hood
Air Conditioner
Small front plow
Dual fuel sight glasses
Late fuel tank
Spare knuckle brackets on rear pilot
Spare knuckle basket on walkway
Cab vent
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO H-6-G - DC/Silent - Canadian National Railway (Tilted Wafer) #1373
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
RS-18u, DCC Ready - New Brunswick East Coast (Patch) #1816
Era:1998-2008
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - CDEX #16251
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO VIA HEP2 Coach: VIA Rail - HEP2 Club Scheme: #4000
VIA Rail HEP2 Club Scheme (1996 to Present)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
N Scale Modern Tagger Graffiti Decals - Set #2 (9pcs)
Love it or hate it, graffiti is everywhere. We do not condone painting graffiti on real railroad cars, buildings, bridges, etc. and it is against the law. But defacing your model railroad with Blair Lines Graffiti Decals is fun and still legal as far as we know! All decals are reproductions of graffiti found on real railroad cars.
All of these graffiti decal sets are now lasercut! What this means is you will no longer have to trim these decals close. You only have to cut a couple of small tabs and soak the sheet in water. As an added bonus, the decals are now printed on white decal paper making them more opaque!
PS-2 2003 2-Bay Covered Hopper - Northern Pacific #75416
MODEL FEATURES:
- Fully assembled and ready-to-run
- Photo-etched roof walks
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Weighted for trouble-free operation
- Window packaging for easy viewing
- Interior plastic blister safely holds the model for convenient storage
- Body mounted McHenry scale knuckle spring couplers
- Machined metal wheels with RP25 contours operate on all popular brands of track
- All 4-packs come with unique road numbers
Z/N/HO Scale 1 Amp Wired Mobile Decoder
- Size: .55 x .4 x .148 inch
- 14mm x 10.23mm x 3.77mm
- Z/N/HO Scale
- 1.0 Amp/1.5 Amps Peak
- 4 FX3 Functions, 0.5 Amp
- FX3 Function outputs for prototypical lighting effects and on/off control:
- Constant Brightness Lighting with directional or independent control.
- Optimized selectable LED or incandescent lamp operation
- Realistic Effects like Ditch lights, Mars lights, strobes, and many more
- Configurable Pulse Function available on all function outputs.
- FX3 & Standard Function Qualifiers operate functions based on direction,
- F0 on or off, direction and F0, and whether loco is moving.
- Function Mapping for custom function setup.
- Master Light Switch turns off all lights & functions with one keystroke.
- Advanced Consist Function Controls.
- Digitrax LocoMotion® System-Your locomotives look like the real thing.
- The Digitrax LocoMotion System makes them run like the real thing, too!
- Scaleable Speed Stabilization (Back EMF) with simple setup & 256 level resolution.
- Torque Compensation.
- 128 Speed Step operation (14 or 28 steps can also be used).
- Momentum with acceleration and deceleration.
- Normal Direction of Travel is user selectable.
- Switching Speed feature for easier and faster access to yard speeds.
- 3 Step Speed Tables set start, mid and max voltage for custom control.
- 28 Step Speed Tables with 256 level resolution for precise control.
- Program CVs using any Digitrax Compatible Control system without havingto buy any extra equipment.
- 2 Digit and 4 Digit Addressing.
- Basic, Advanced & UniVersal Consisting.
- SuperSonic motor drive for silent operation.
- Direct mode programming.
- Decoder Reset CV with or without speed table reset.
- Transponder Equipped ready for transponding on your Layout.
- Motor Isolation Protection helps prevent damage to your decoder.
- Automatic Analog Mode Conversion when running on DC layout.
- Decoder Lock for individual programming of multiple decoders in one loco.
DT&I #1627
Bowser ready-to-run 70-Ton Offset Hoppers are based on typical cars used across the continent for hauling coal and aggregates. Layout-ready cars feature accurate decoration, molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton Offset Hopper is a great addition to your transition or classic diesel-era car fleet.
HO SD60 - DCC/Sound - Norfolk Southern #6517
MODEL FEATURES:
Locomotives come with railroad-specific details including: Operating beacon (in DCC/Sound version), horn, winterized hatch, antenna, handrails, etc.
SPECIFICATIONS:
DCC: Equipped with Econami2
PROTOTYPE MANUFACTURER: EMD
Axles: 6
LIGHTED: LED Lighting
PROTOTYPE AND BACKGROUND INFO:
In 1984, Electro-Motive (EMD) introduced the 60 series locomotive. These had many improvements over the earlier models including features such as: New and improved EMD 710 power plant producing 3600 HP, wheel slip control, computerized cabinet replacing the older and unreliable components.
This design spawned into many other upgrades within its class like the modernized wide cab, Isolated cab, and even the start of AC traction technology.
These locomotives were suited for just about any mainline service that could be thrown at them. The model was fairly popular with class one railroads, with Norfolk Southern purchasing the most at 151 units. Most of them are still in service today. Norfolk Southern in 2010 started a large full rebuild program of their SD60s (including purchasing cores from other sources) into SD60Es, which rebuilt them from the frame up with new electrical components and a newly designed cab to improve visibility and forward crash impact safety.
HO GP9u - DC/DCC/Sound - Ontario Southland Railway #1620 - Otter Valley Railroad Exclusive
- First ever accurate model in plastic - often imitated, never exact!
- Long service lives, 1980s+, all throughout Canada and the US
- Powered slug with traction motor sounds and flashing beacons
- Heavy diecast frame with super detailed piping and traction cables
- Detailed Blomberg trucks (Later series have rotating bearing caps)
- Traction motor details on gearbox
- Working track lights, class lights, control stand lights
- Metal side handrails
- Working ditch lights on prototypically appropriate road numbers
- Front and rear plows, plates or footboards on appropriate road numbers
N Scale Flexi Flo Hopper (Late) - PC/CR Scale Test Cars - 2-pack
Road Numbers Include:
#80019
#80027
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
RTR 52Ft Mill Gondola, CW/ Oregon Steel #5061
MODEL FEATURES:
Fully assembled and ready for your layout
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
33In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
Open top cars, such as gondolas, have been a mainstay on railroads for decades as they are ideal for carrying large, bulky loads such as coil steel or scrap metal loaded by crane.
Peco Code 83 SL 8376 Streamline #7 Insulfrog Turnout - Nickel Silver Right Hand Curved HO Scale Track
Shipped from Ontario Canada
HO Comet Commuter Car Set - Montreal AMT (Late Lake Scheme) Set #1
Cab Coach: #702
Coaches: #722, 730
The Rapido Trains HO scale Comet Cars features:
Designed from field measurements as well as original blueprints and documents.
Full interior detail including individual seats, and unparalleled underbody detail incl. all pipes and boxes
Extremely free-rolling inside-bearing trucks with metal wheelsets
Tinted windows and accurate painting and lettering
All-wheel electrical pickup and advanced circuitry for flicker-free lighting on both DC and DCC layouts
Coaches feature controllable interior and end marker lights using the included magnetic wand
Cab Coach lighting controlled using the magnetic wand on both DC and DCC layouts
1:87 Greyhound Canada Tribute Set (5 Different Schemes)
LIMITED EDITION!!
Lubricants - Workbench Assortment
Precision lubricants for craftsmen! This super-saver value includes all seven lubricants plus complete instructions that spell out precise applications and the exact lubricant to use. Be prepared! Know where and when to use which lube.
1:87 CAT D9T Track Type Tractor
Details:
1:87, Track-Type Tractor
Dimensions:
4⅜ x 2½ x 2¼ in
110 x 62 x 57 mm
HO 53ft Singamas Corrugated-Side Container - UPS
(UPSU Reporting Mark; gray, black, yellow)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - MRRX #4806
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
N Scale AutoFlood III RD Coal Hopper - CEFX #600547
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO Surfliner Diner w/Lights & Sound - AMTK/Diablo Canyon #6305
AMTRAK SURFLINER PASSENGER CAR FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurate painting and printing featuring licensed Amtrak paint colors and artwork
- Each car individually named and numbered
- Tinted window glass
- Full end details including train line hoses & HEP receptacles
- Cab cars feature 3 different antenna arrangements per era
- Unique interior details for each car type
- Detailed paint colors including separate colors for floors, walls, seats, tables, control compartment, etc.
- Business class cars feature complete upper & lower service areas
- Cafe cars feature complete kitchen & serving area
- Interior stair & luggage rack details
- McHenry® scale knuckle couplers - Kadee® compatible
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- Packaging securely holds model for safe storage
LED LIGHT EQUIPPED FEATURES:
- LED lighting for long life and reliable operation
- On-board DCC Decoder by NCE – Operates in DCC and Analog (DC) with lighting functions controllable in DCC
- LED Interior Lights
SOUND EQUIPPED MODELS ALSO FEATURE:
- Soundtraxx Tsunami SoundCar decoder w/ exclusive sounds recorded from actual Surfliner cars
- A/C compressor operation
- Doors opening & closing with associated beep
- Generic station announcements with associated beep for PA system use
- Vacuum toilet operation sound
- Clickety Clack rail sound
- Brake system sounds including brake set & application, and emergency brake air dump sound
- Cab cars feature authentic K5LA horn and bell
- Interior LED lights on upper & lower levels
- Working marker lights on car ends
- Cab cars feature working head & ditch lights
9G Turnout/Motion Control Servo
FEATURES:
- 9G mini servo system for turnout or motion control.
- Under layout mounting bracket included.
- Compact install for tight N scale switches, and decks.
- Includes pre-formed drive wires.
- Supplied with mount hardware.
Evergreen Scale Models 9007 - .015in Clear Oriented Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
HO GP9 - DCC & Sound - Chesapeake & Ohio #6168
ETA: May 2023
Detailed Information
C&O FEATURES:
Short hood mounted bell
Forward 5-chime horn
Dynamic brakes
Tall exhaust covers
Expert approved art
Between 1955 and 1957 C&O bought 363 GP9s. These units were the backbone of the fleet, used on both road trains as well as local service. In the mid 60s C&O adopted a new simplified paint scheme with the large C&O initials on the long hood. Although the purchase of newer high horsepower units displaced many GP9s to secondary service, most of the fleet soldiered on into the mid 80s. Many units were retired in this version of C&O dress. These road numbers lasted into the mid 1980s which allow the widest range of modelers to benefit from this release.
ROAD NUMBER SPECIFIC FEATURES:
#682
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#683
Snowplows on both ends
non-dynamic
bell mounted center of long hood
#688
Dynamic brakes
bell mounted on long hood
#690
Dynamic brakes
bell mounted on long hood
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Value Line RTR - 13 Panel Coalporter - CSXT (Gray) #390620
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
FEATURES:
- One time run of these road numbers, order now - limited quantity available
- Prototypes seen from coast-to-coast 1974 to the present
- Handles all types of general freight loading
- Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
- 41ft 3in Truck Centers
- 15ft 2in Tall
- 10ft 8in Wide
- Fully assembled
- Correct 33in RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Scale - 39/40 GMC Half Ton Flatbed- Unpainted and Resin Cast Kit
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - KRRX #4732
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Brass Strip - 12inch x 1/4inch x .025inch
Length: 12inch
Width: 1/4inch
Thickness:0.025inch
HO GE 44 Tonner Phase Ic - DC/DCC/Sound - New Haven (Warm Orange) #0801
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
Liquid Plastic Cement - Extra Thin - 1.4oz 40mL Quick Setting
For styrene, thin formula allows for precise application, with applicator brush.
HO 40ft Corrugated LC Container - Hanjin #2 (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered
HO G2 Dash 9-40C - DCC Ready - Norfolk Southern #8820
NORFOLK SOUTHERN FEATURES:
- Thoroughbred paint scheme for 2013-2014 to 2018 appearance
- Each road number decorated different per repainted status
- Curved engine compartment hood profile
- Early tabbed dynamic brake intake panels
- Vertical mounted struts mounted on side frames with 40 inch wheels per prototype
- #8777: Early dynamic brake exhaust fascia
- #8820 & #8855: Late dynamic brake exhaust fascia
- Sound version features onboard DCC decoder with SoundTraxx Tsunami2 sound
DASH 9 SERIES LOCOMOTIVE FEATURES:
- Fully-assembled and ready-to-run
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Coupler cut levers
- Flexible rubber MU hoses for durability
- Flexible rubber trainline hose
- See through cab windows
- Full cab interior
- Walkway tread
- Fine-scale Celcon handrails for scale appearance
- Windshield wipers
- Lift rings
- Wire grab irons
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Sander lines
- McHenry scale knuckle couplers - Kadee compatible
- Genesis drive line with 5-pole skew wound motor, precision machined flywheels, and multi-link drive train
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED lighting for realistic appearance
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
SOUND EQUIPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO Scale G2 SD90MAC Diesel - DCC & Sound - CIT Group (CEFX) #119
Detailed Information
CEFX FEATURES:
Front and rear ditch lights mounted above the walkway
Different air horn types per prototype road number
Bluebird paint scheme
Originally built in 1999, this order consisted of 40 units in total. They were originally painted in a maroon-and-grey scheme and could be found in lease service as far as British Columbia and Oregon. Recently, several units were acquired by or leased to other railroads, while the -Bluebird- paint scheme was applied to #s 105, 119, 130, 133, and 136.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO EMD GP39-2 - DCC & Sound - Portland and Western PNWR #2311
Detailed Information
PNWR FEATURES:
Ex-ATSF
Early Phase 1 body
Front and rear ditch lights
Illuminated number boards
Nathan 3-chime horn
Removed class lights
Small EMD front plow
Large front anticlimber
-Switcher- style walkway steps
Blomberg M trucks
Road number specific antenna placement
The Portland and Western was founded in 1995 taking over former Southern Pacific branch lines in Oregon. It operates a combined 516 miles of track throughout the state and is part of the large Genesee & Wyoming Railroad group. The PNWR also has a subsidiary, the Willamette and Pacific. The WPRR motive power can be seen on PNWR trains as they were used anywhere on the system as needed. Major transported commodities pertain to the lumber industry, but also include many other goods. They operate many older EMD locomotives, some dating back to the 1950s! The ex-Santa Fe GP39-2s become a favorite on the railroad, with a few still painted in Santa Fe colors.
ROAD NUMBER SPECIFIC FEATURES:
#2304
Genesee and Wyoming corporate scheme -Corvallis-
Xenon beacon (effect in DCC mode)
unique white logo on nose, cab mounted headlights
alternate flashing ditch lights (effect in DCC mode)
standard bell
#2311
Faded Santa Fe colors with W&P/P&W patches
nose mounted headlight
alternate flash ditch lights (effect in DCC mode)
standard bell
#2316
Genesee and Wyoming corporate scheme -Albany-
25th anniversary logo
cab mounted headlights
standard ditch lights
electronic bell
GP39-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Trinity 3230 Covered Hopper - CIT Group/Capital Finance #95901
FEATURES:
All new tooling
Ready to run
Injection molded plastic
Fine scale detail
Separately applied wire grab irons
Separately applied wire cut levers
Etched metal roofwalks
Crisp painting and printing
HO Magor 54Ft Flat Car - DODX - Early Repaint (Era:1975+) #38323
The Rapido Trains HO scale DODX Magor Flatcar features:
FIRST TIME IN PLASTIC!
Drawn from original blueprints, measurements and 3D scans
Fully-detailed underframe including piping and equipment
Correct Buckeye 3-axle trucks with incredible detail
Trucks have friction bearings or retrofitted roller bearings as appropriate
Metal knuckle couplers
Simulated wood deck design
Loads coming soon
HO C&O Cupola Caboose - Detroit, Toledo & Ironton #130
Features:
True scale dimensions with accurate details
Weighted, detailed underframes
Trucks equipped with free-rolling metal wheels
Equipped with AccuMate Knuckle Couplers
Accurate painting and lettering
AccuMate couplers are made under license from AccuRail, Inc.
Canada Southern #3375
Bowser ready-to-run 70-Ton Offset Hoppers are based on typical cars used across the continent for hauling coal and aggregates. Layout-ready cars feature accurate decoration, molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton Offset Hopper is a great addition to your transition or classic diesel-era car fleet.
HO 20ft Corrugated Container - Container King/CKRU #2 (3pk)
MODEL FEATURES:
- Fully-assembled
- Easily stackable
- Each container is individually numbered
PROTOTYPE AND BACKGROUND INFO:
An intermodal container is a large, standardized shipping container, designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport ? from ship to rail to truck ? without unloading and reloading their cargo. Corrugating the sheet metal used for the sides and roof contributes significantly to the containers rigidity and stacking strength, just like in corrugated iron or in cardboard boxes. International containers have castings with openings for twistlock fasteners 20 feet apart on the eight corners, to allow gripping the box from above, below, or the side, and they can be stacked up to five units high for storage.
Lichen - Natural
Small Bag - 86.6 in³ (1.41 dm³)
Natural lichen blends in a variety of colors and textures when combined with other Woodland Scenics landscape products, such as Turf and Foliage.
HO MLW M420 - DC/DCC Ready - Delaware-Lackawanna #2045
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559 (delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
Bowser HO 50Ft 2 Door Boxcar Reading No 19227
Ready to run
Roller Bearing Trucks with 36in wheels
Knuckle couplers
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
HO 60ft Bulkhead Flatcar - TTPX #805267
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
HO EMD SW9 - DCC & Sound - New York Central (NYC As Delivered) #8930
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO Lightweight Coach - CNR - 1954 Scheme #5635
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO 40ft ACF Modernized Welded Boxcar - Lehigh Valley #66186
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Trinity 3-Bay Hopper - AGPX #96000
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Scenic Accent Figures - Pedestrians (6 pkg)
Woodland Scenics HO Scale Scenic Accents people, animals and scenery details feature figures molded in realistic poses and are hand painted for extra realism.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - KRRX #4713
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Intermediate Height Utility Poles (Wood) (12pk) - Kit
FEATURES:
- New tooling!
- Must-have detail for modeling a modern power grid
- Prototypes support reduced voltage lines between substations and service transformers
- Parts to build 12 poles
- 36 separate insulators - can be drilled out to accept wire (#933-3344, sold separately)
- Realistic wood grain texture and color
- Molded in brown and light gray
- Each pole measures 6-1/4 inches; 45 scale feet tall above surface; mounting pin measures 3/8 inch
- Model a complete power grid with these Cornerstone kits, including the Coal Conveyor with Transfer House (#933-4171), Modern High-Voltage Transmission Towers (#933-3343), Lakeshore Energy Power Plant (#933-4172), Substation (#933-4175), plus SceneMaster Utility Poles (#949-4120) and Utility Company Vehicles (#949-11636 series), each sold separately
HO RTR 70 Ton 2 Ballast Hopper w/ Side Chutes - Reading & Northern #112
Product Information
Perfect for work train service on our railroad, Bowser HO Scale ready-to-run 70-Ton 2-Bay Ballast Hoppers with Side Chutes (Ballast Gates) feature accurate molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. Authentic decoration and multiple roadnumbers per roadname make these 70-Ton Ballast Hoppers welcome additions to any diesel-era freight train consist.
Iconic Replicas 870253- 1:87 Buses MCI D4505 Toronto Police Service
By Awesome Diecast
All diecast metal
Aluminum Flat Sheet - 0.064inch x 4inch x 10inch
1 piece
Length: 10inch
Width: 4inch
Thickness:0.064inch
BH1 Tsunami 2 Sound Decoder - GE Diesel
Dimensions: 97 x 16 x 7.7mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 8 LED-Friendly Outputs!
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
Get an easy upgrade for your Bachmann Sound Value diesel models with our newest Tsunami2 decoder! The TSU-BH1 offers 8 LED-friendly function outputs so resistors are not required for LEDs! (See the wiring diagrams under product documentation for more information). Light effects are fully remappable and offer full access to our 20+ HyperLight effects.
This decoder is available in 3 sound profiles EMD, GE, and ALCO. For an easy install, simply replace the Sound Value decoder and enjoy all of the Tsunami2 features you love!
This decoder is designed to replace the factory board in the following Bachmann Sound Value Diesel Models: FA-2, FB-2, S-4, E7-A, SD70ACe, ES44AC, GP30, GP38-2, GP40, GP7, and SD40-2.
Fun Tsunami2 features including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and more. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+), couplers, and more!
This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.
HO New Look Bus Santa Monica
Destination Sign:
3 Lincoln Blvd, Montana Avenue
Detail Variations:
Air Conditioner
Left-side Emergency Door
4-window exit door
Early-style engine door
Standee Windows
Roof-top Fleet Numbers
Intercity branding
HO 89ft Thrall Enclosed Tri-Level Auto Carrier - Norfolk Southern/ETTX Flat #33565/810116
Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these Walthers Proto models! Introduced in the mid-1970s especially to carry automobiles, the prototypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89ft flatcars with sidesill cut-outs and 28in wheels for added clearance. In service all across North America, the racks carry the owners logos, and most ride on flatcars leased from TTX with ETTX reporting marks.
A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
-Limited edition - one time run of these numbers!
-Prototypes in service from the 1970s to the present
-Factory-installed grab irons
-Separately molded and applied side ladders
-Ultra-smooth rolling metal axles with correct 28in wheels
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24in radius is recommended for operation.
N Scale Layout-Ready Trees - Deciduous Trees (4/pkg) 2-3 Inches
Layout-Ready Trees for Your Railroad!!
Bring your urban or countryside railroad to life with realistic SceneScapes trees by Bachmann. Create your own grove or blanket a hillside in dense forest with deciduous and coniferous trees offered in a variety of sizes.
- for use with all train layouts
- realistic colors
- removeable bases for more placement options
- size assortment for added realism
Suitable for all scales, but most commonly used in N.
HO Scale - RTR 60Ft Berwick Hi-Cube Box - Missouri Pacific #269488
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Detailed underbody including full brake gear
Weighted for trouble free operation
Replacement parts available
Machined metal wheels with RP25 contours operate on all popular brands of track
Separately applied wire grab irons and etched end platforms
Machined metal wheels
Body mounted McHenry operating scale knuckle couplers
Minimum radius: 22inch
HO Scenic Accents - Bystanders (6pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
A set of two women and four men - the men and one woman stand and one woman sits.
HO EMD SD7 - DCC & Sound - Bessemer & Lake Erie #454
Bessemer & Lake Erie
- Unique -B&LE- style sand fill door hatches
- Long hood forward operation
- Extra large pilot step and corresponding additional stepwell step (First time done on a plastic model!)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO PS4750 Covered Hopper - SOO Line (Original 1-1980) #75466
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inch Wheels
SOO -Original 1-1980- brings back a popular PS4750 paint scheme. We offered a different 1979 group of SOO cars about 8 years ago (!) and ever since, our mailbox has been full of requests for MORE SOO. We are very pleased to finally offer another SOO lot, this time from the 400-car 1980 Pullman group. These covered hoppers feature truck mounted brake beams, a side-mount train air line and scale-sized Miner -Selflok- outlet gates. Painted in that special shade of -Soo Line White- (Soo modelers know exactly what we mean), the models show off the classic yellow wheat stalk graphics and green SOO LINE roadname. An accurate and critical car for SOO and CP Rail modelers and lovers of the PS4750 everywhere, these cars continue to serve in grain and in buffer car services.
HO Value Line RTR - 13 Panel Coalporter - Conrail #503034
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The G52H class remained in service into the early 2000s.
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO GMD SD40-2 - DCC & Sound - CP Rail: No Multimark #5671
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
Bi-Level Auto Racks - BNSF Rack & Flat Car - Circle Logo #300100
HO SD70M - DCC & Sound - EMDX/Maroon/Black #7018
Detailed Information
EMDX FEATURES:
Solid maroon/black scheme
Large EMD front plow
Round EMD style front ditch lights
Can-style roof antenna
Early EMD trucks with hidden bearings
During 1995, EMD built 22 SD70Ms for their lease fleet, including 3 official demonstrators built in 1992. Painted in 2 schemes (solid EMD maroon and black, and maroon, grey and silver), EMD was able to provide many different railroads to test and compare their new 710 prime mover to other current models. These could be seen all over the US and added a splash of color when mixed in locomotive consists. By the early 2000s, they were sold to CSX and eventually painted into CSX colors.
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO RTR - NSC Articulated 3-Unit 53' Well Car - Burlington Northern Santa Fe #211529
Modernize HO operations in minutes with the National Steel Car (NSC) Articulated 3-Unit 53' Well Cars from WalthersMainline! Seen in service all across North America since their debut in 2012, features of the models include:
One time run of these roadnumbers, order now - limited quantity available!
Prototypes in service from 2012 to the present
Carries 20ft, 40ft & 53ft cars in the well
Detailed brake gear w/air lines
Separately applied side ladders
Correct 33in (outside trucks) and 36in (inside truck) RP-25 metal wheelsets
Die cast metal body for excellent performance empty or loaded
Proto MAX metal knuckle couplers
Add SceneMaster Containers for the finishing touch, each sold separately
HO Idler Gear - 23-Tooth (4pcs)
F30A 50Ft Flat Car: PRR Delivery #474398
Rapidos new model features:
Die-cast chassis and deck for optimum weight
Correct trucks (PRR 2E-F10, roller bearing converted or full roller bearing trucks)
Turned metal wheels
Kadee #158 semi-scale couplers
Full brake rigging
Separate grab irons
Correct piggy-back details (Class F30D & G)
Six car numbers per paint scheme available. 6-packs are easily broken up for individual sale.
Built-&-Ready Landmark Structures - Corner Porch House
Two-story home with cedar-shake roof and a corner wrap-around porch. Beautifully weathered and loaded with details, such as a bicycle built for two, rocking chair and table, guttering, rain barrel, exterior cellar door and loads more!
HO EMD SD10 - DC/Silent - Milwaukee Road #550
Milwaukee Road
- SD10 model designation given by Milwaukee Road for their capital rebuild program of their old SD7s and SD9s
- A first in HO Scale plastic models
- Single fuel tank
Chopped short hood and modified cab
- Later style Horst air intake
- Rotary beacon
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Fir 2 - 4inch 5 - 10cm Tall pkg(18) Evergreen Blend
Ready Made Trees Value Packs
Nine different value packs contain deciduous or pine trees ranging in size from 3/4inch to 8inch. Quantities vary according to size. Available in mixed green, conifer or fall colors.
HO RTR 65Ft 6inch Mill Gondola - MKT #43720
MODEL FEATURES:
Working drop ends. Gently lift up & push inward to fold ends down.
Separately applied wire grab irons
Interior detailing
Decorated models fully-assembled and ready to run out of the box
Machined metal wheels and RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Minimum radius: 18inch
HO ACF 50Ft 6In Boxcar - Pan Am #32024
FEATURES:
Prototypical non-terminating corrugated ends
Diagonal paneled roof
Single 10-foot YSD design sliding door (non-operating)
Detailed cross-member attachment rivets on the side sills
Weighted, detailed underframes
True scale dimensions with acccurate details
Equipped with AccuMate knuckle couplers
HO EMD FT A+B Set - DC/DCC/Sound - Reading (Black & Green) #256A + 256B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286365
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
HO Scale G2 AC4400CW - DCC & Sound - Southern Pacific #336
Detailed Information
SP FEATURES:
Nathan P-3 Horn
High number boards
Early body features
Unevenly spaced rear grab irons
Central air intake in forward position
Early no-notch bolted on fuel tank
Extended radiator hatch on engineers side
Prime Air Dryer
Vertical handrail behind invertor cabinet
GE Hi-Adhesion trucks
Modified outside struts on opposite sides of trucks
Alternating flash front ditch lights (Effect in DCC)
Built between April and Nov of 1995, SP placed an order for 279 AC4400CWs from General Electric. Not only was this SPs first dive into AC technology but was their largest single locomotive order (and last) in history. GE set up a maintenance shop in Denver CO to support these units. They featured Harris Locotrol II equipment for use in DPU service; although they were used for dedicated power on Colorado coal trains, they could also be found roaming the system wherever they were needed
ROAD NUMBER SPECIFIC FEATURES:
#114
Unique spare knuckle box on rear pilot
#239
Unique spare knuckle box on rear pilot
#336
Unique additional handrail above capacitor box
AC4400CW SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
N Scale Thrall High-Side Gondola w/ Load - Herzog/ White (3pkg) #2
Detailed Information
MODEL FEATURES:
Machined metal wheels
Screw-mounted 100-ton roller bearing trucks
Body-mounted McHenry scale operating knuckle couplers
Accurately painted and printed
Operates on Code 55 and 80 rail
Fully-assembled
Accurately painted and printed
Highly detailed, injection molded body
Weighted for trouble free operation
Minimum radius: 9 3/4inch
PH5-R Power Pro 5, DCC Complete Wireless System
An updated version of Power Pro Starter set item 524-2.
This 5 Amp starter set has everything you need to get DCC equipped trains up and running. It includes the user friendly Pro Cab. You can be up and running in less than 20 minutes. The PH5-R is a wireless equipped system. It is designed to eliminate the need for a tethered throttle. All features of the Pro Cab are usable while in radio mode. Up to 60 additional radio and tethered cabs can be used simultaneously.
Note: This product is not currently available for sale in Canada.
Contents of the 5 Amp PH5-R System:
- PH5 System Box with two 2-pin plugs
- Pro Cab R Throttle
- Coiled cable for cab - 6 wire RJ12 cab bus cable
- Two seven foot flat cables for UTP and RB02 - 6 wire RJ12 cab bus cable
- Twelve inch flat cable - 4 wire RJ-H control bus cable
- UTP cab bus panel
- RB02 Radio Base Station
- Radio Antenna
- Power Pro system reference manual
- Radio Addendum for Manual
- Internationally approved Power Supply with power cord
Do not forget to use a REAL surge protector not a power strip!
We highly recommend a DCC track output Circuit Breaker like the EB1 v1.1.
HO GE 44 Tonner Phase IV - DC/DCC/Sound - Pennsylvania #9333
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Union Pacific Rack, Trailer Train Flatcar (TTBX) #963129
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO Scale Budd Steel Wheel Set
Truck not included
Pewter cast 22.5inch wheel set of Budd type Steel wheels
HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4573
5inch stripe w/water expansion tank, no ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
HO 36 Inch Semi-Scale Insulated Brass Wheelsets - (12/pkg)
Nickel Silver Plated Brass Insulated Wheelsets
These wheels follow NMRA RP-25 Standards.
One wheel is insulated from the all-metal axle.
The entire wheelset is non-magnetic.
The axle length is 1.006in (+- .004in)
28in wheels are used on modern Tri-Level Autoracks, some Bi-Level Autoracks, and some older intermodal cars such as Impack spine cars, front runners & four runners - check your prototype.
33in wheels are used on 50 & 70 ton capacity cars (CAPY approximately 150,000 LBS or less).
36in wheels are used on 100 ton capacity cars (CAPY approximately 200,000 LBS), and on all passenger cars no matter the era.
38in wheels are used on 150 ton capacity cars, primarily the center connection trucks on modern intermodal cars with 33in wheels at the coupler ends.
(Cabooses can use either 33in or 36in wheels depending on the prototype.)
The CAPY information is typically printed on model freight cars and can be used as a guide. Some cars have the wheel size printed on the sides or ends of the car in the data. If you are ever unsure of which size to use, you can simply replace the wheels currently on the car with the same size.
Wheel diameter can be measured with a caliper:
28in wheels measure (28/87.1=.321in) in HO scale.
33in wheels measure (33/87.1=.378in) in HO scale.
36in wheels measure (36/87.1=.413in) in HO scale.
38in wheels measure (38/87.1=.436in) in HO scale.
(87.1 = HO scale to prototype ratio. HO scale is 87.1 times smaller than the prototype).
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140037
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Maxi I Well Cars - DTTX #73024 (5pk)
Era: 1971-1990, 1991-2009
MODEL FEATURES:
- Fine ladder detail
- Separately applied brake piping and trainline hoses
- Weighted for optimal performance
- Body-mounted McHenry lower shelf operating scale knuckle couplers
- Prototypically correct 33 and 38 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
1-72 Stainless Steel Hex Nuts (12/pkg)
HO Scale Strap Hinges
Etched Brass strap hinges for both HO and O Scales. 60 hinges on each fret in two sizes: 10inch and 8inch (for HO) and 5.5inch and 4.5inch (for O Scale).
HO MLW M630 - DCC & Sound - British Columbia Railway BCR #719
Two tone green w/lightning stripe, Face mounted ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound V5 decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
HO CA-8 Early Caboose w/Lights DCC Ready - Union Pacific #25576
ETA: August 2021
Detailed Information
Union Pacific CA-8 Caboose FEATURES:
Caboose trucks with swing arms, friction or animated roller bearing bearing caps as prototype appropriate
Various safety slogans, in both early banner style with green lettering and late vinyl decal with special graphics
Sliding cupola side windows
Cupola-mounted marker lights when appropriate
25576 is offered in an early CA-8 Pool service configuration
Nickel Silver Expandable Track- Code 100
Designed for fitting two modules or other track arrangements together, this unique accessory from WalthersTrack requires no trimming! Other features include:
Adjustable center section expands overall length from 8-7/8" to 9-3/8" 22.5 to 23.8cm
Center section features special tight-fitting joiners for positive electrical contact
Built tough for repeated adjustments
Ideal for connecting modules and filling track gaps
Use in place of any standard 9" (22.8cm ) straight snap track section
Cutouts at both ends for standard rail joiners - no modification needed
Compatible with all Code 83 and Code 100 track
Custom formulated nickel silver rail for outstanding electrical conductivity
Ties molded in realistic dark brown with enhanced wood grain detail
HO 60ft PS Auto Box - Norfolk & Western/NW #600429
MODEL FEATURES:
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Fully detailed full cushion underframe
- Full underframe detail: air brake reservoir, control valve,
- Separately applied door closure rods, side ladders, metal grab irons and brake cylinder with plumbing and brake rod details
- etched metal end platforms
- 100-Ton roller bearing trucks with operating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Machined metal wheels
- Weighted for trouble free operation
- Multiple road numbers
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
During the 1960s, Ford Motor Company, Pullman Standard and Santa Fe pooled their resources to develop a standard boxcar to meet the transportation needs of automobile manufacturers in the United States. Delivered in 1965, the Pullman Standard auto parts boxcar is the most prolific example of this type of freight car. It ultimately changed the face of automobile manufacturing and rail transportation.
PRIMED FOR GRIME MODELS FEATURE:
- Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Some Prime for Grime models feature paint scheme variations.
The Walthers Cornerstone Brick Office Building is typical of a freestanding brick structure constructed in the first half of the 1900s and still in use today. Whether used as an office building at an industrial complex or a railroad yard, or converted to housing or commercial use, this kit is perfect for your steam or diesel-era layout. This easy-to-build plastic kit features realistic brickwork, a concrete foundation, printed window treatments and small business signs. Designed to look impressive yet small enough to fit your layout, this brick office building will have a home on your layout.
Perfect for steam and diesel-era layouts
Use as office building, small business or apartments
Compact size fits small layout spaces
Detailed brick work with concrete foundation and stairs
Easy-to-build plastic kit
Printed signs and window treatments
Molded in appropriate colors and clear window glazing
Measures: 7-11/16 x 5-1/4 x 5in 19.5 x 13.3 x 12.7cm
HO 50Ft FMC 5283 DD Boxcar - Canadian National #555156
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Positionable sliding double doors
Body-mounted McHenry operating scale knuckle couplers
Painted and printed for realistic decoration
Precision machined metal wheels
Highly-detailed, injection molded body
Weighted for optimum performance
Wheels with RP25 contours operate on all popular brands of track
Minimum radius: 18inch
3/32In Fluorescent Blue Rod (8pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
BLUE
HEIGHT IN INCHES
3/32In
HEIGHT IN MM
2.4mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
HO EMD GP40 - DCC Ready - Canadian National (Stripes) #4013
1978+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO - 4750 Cubic Foot Rib-Sided - 3-Bay Covered Hopper - Goodseed & Grain #478965
HO Scale EMD Diesel Extra Cab Windows - pkg(4)
Product Information:
Individual clear plastic windows replace solid window casting in hood units.
HO Glacier Gravel Company - Kit
Product Information
Add aggregate traffic to your layout with this rugged trackside structure. The HO Scale Walthers Cornerstone Glacier Gravel Co. is a model of a stone crusher-washer with equipment for loading rail cars or trucks. Railroads have an enormous appetite for crushed rock. A mile of mainline can gobble up thousands of tons. Glacier Gravel Co. will help satisfy your railroads appetite for rock.
This easy-to-build kit looks great as part of a stone quarry operation, alongside mines like the New River Mining Co. 933-3017 and Coal Flood Loader 933-3051, in a mine, or as part of a slag recovery operation down the track from the steel mill buildings. Matching conveyor sections 933-3149 are available separately for customizing your Glacier Gravel operation as needed. Detailed parts capture the look of concrete and steel construction. The kit features corrugated construction on a heavy poured concrete foundation/loading tunnel. Conveyors to a truck dump and feeder from the quarry complete the facility. Rock crushers similar to this have been in use since the 1940s, so Glacier Gravel Co. will fit perfectly into transition and modern era layouts. The main building can accommodate two tracks inside and includes a detailed loading bin. Glacier Gravel Co. also includes decal signs and complete instructions. Glacier Gravel Co. is just one of a wide variety of Cornerstone industrial buildings.
Easy-to-build plastic kit
Use as a stand-alone rock crusher and loader or as part of a larger quarry or mine
Fits 1940s and later modeling eras
Handle hoppers, gondolas or trucks on up to three loading pockets
Molded in appropriate colors
Decal signs for several businesses
As shown Glacier Gravel Co. measures: 9-3/8 x 11 x 10-1/4inch (23.8 x 27.9 x 26cm)
HO Addams Ave. - Part Two - Cast Hydrocal Kit
DIMENSIONS:
9 x 5 inches
This rundown looking block features a Massage Parlor, Bail Bondsman, Nightclub and Mexican Grocery. Perfect for any RR Avenue scene! Part Two of a five part series.
1:87 1984 MCI MC-9 Motorcoach Bus - Canadian National
(silver, white, blue, red)
By Awesome Diecast
Product Information
This detailed HO Scale MCI MC-9 Motorcoach Bus, also known as the Crusader II, is perfect for adding realism to your modern-era city streets or out on the open highway. Introduced in 1978, over 9,000 MC-9 were built for bus operators in the U.S. and Canada. The MC-9 was familiar to travelers who rode or saw them while on vacations or traveling to far-flung destinations. This limited-run model features a die cast body with injection-molded parts, window glazing and fine decoration. Its a great addition to your 1970s and later layout scenes or vehicle collection. The MCI MC-9 Motorcoach Bus is one of many detailed HO Scale bus models from Iconic Replicas.
HO GP9u - DC/DCC/Sound - CP - No Multimark : #8234
- First ever accurate model in plastic - often imitated, never exact!
- Long service lives, 1980s+, all throughout Canada and the US
- Powered slug with traction motor sounds and flashing beacons
- Heavy diecast frame with super detailed piping and traction cables
- Detailed Blomberg trucks (Later series have rotating bearing caps)
- Traction motor details on gearbox
- Working track lights, class lights, control stand lights
- Metal side handrails
- Working ditch lights on prototypically appropriate road numbers
- Front and rear plows, plates or footboards on appropriate road numbers
25/32 inch Vertical Railing (2pcs)
Use for hand rails, stair rails, roof trusses, grating and other steel structures. Precision Injection Molded in Styrene Plastic. May also be used for trellises, fencing window bars, etc.
SCALE
ALL
MATERIAL
STYRENE
COLOR
VARIOUS
HEIGHT IN INCHES
25/32
HEIGHT IN MM
19.8mm
WIDTH IN INCHES
1/8
WIDTH IN MM
3.2mm
THICKNESS IN INCHES
.055
THICKNESSS IN MM
1.4mm
LENGTH IN INCHES
7
LENGTH IN MM
175mm
HO 13,600 Gallon Acid Tank Car - Procor/White (PROX) (3pkg)
ETA: July 2023
Road Numbers:16516, 16527, 16536
Detailed Information
MODEL FEATURES:
Multiple road numbers, unique numbers between singles and 3-packs
Many separately applied details
Etched metal walkways
Different brake systems as appropriate per prototype
Separate wire grabs and handrails
Different end sills as appropriate per prototype
Trucks with animated rotating bearing caps
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Conrail #4117
EMD SD80MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Models equipped with marker lights will be illuminated
Rubber MU hoses for durability
All New Tooling
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
See through steps
Illuminated ground lights
Front and Rear Illuminated Numberboards
Presenting EMDs 5,000HP 6-axle diesel in a whole new level of authenticity. Starting in 1995, EMD revived the 20 cylinder engine design, last seen in the SD45, and introduced the 5,000 HP SD80MAC. Athearn is pleased to announce this locomotive in Genesis 2.0.
CR FEATURES:
Illuminated front and rear red marker lights
Illuminated Ditchlights alternately flash per prototype w/ effect on DCC+Sound version
Four–panel dynamic intake per CR prototype
LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE:
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Bob Smith Industries Quick-Cure 5 Minute Epoxy (9oz)
This is a nine ounce package of Bob Smith Industries QUIK-CURE 5 Minute Epoxy. QUIK-CURE 5 Minute epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE shouldnt be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE is the only BSI epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE can be handled after 15 minutes. Full strength is reached in 1 hour.
12 inch Long Round Copper Rod - 1/16 inch Diameter (5 pkg)
Round Copper Rod - package of 5
Diameter: 1/16 inch
20Ft Corrugated Containers with Corrugated Doors, Ocean Network Express 2 pk
# 035498(0) , 035516(4)
Woodland Scenics 174 Field Grass Medium Green
-Model tall grasses
-Realistic color
-Natural product
N Procor 5820 Covered Hopper - DCLX - (Dow Chemical) #7224
The Rapido Trains N scale Procor 5820 cu ft Covered Hopper features:
Three styles of roof hatches: round, round with ribs and 20 inch vented cover
Two styles of outlet gates: pneumatic and Miner
Etched walkways
Spare hatches included in polybag to let modeler modify for different era
Full end cage details
Accurate paint and lettering
Multiple road numbers available for each scheme
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15155
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO ACF 4600 3-Bay Centerflow Hopper - Gulf Mobile & Ohio (3 pkg) #1
Detailed Information
MODEL FEATURES:
Three body styles:
Early - High side ladder & brake wheel, single side stiffener
Mid - Low brake wheel, short side ladders both ends, single side stiffener
Late - Low brake wheel, short side ladders both ends, double side stiffeners (post 1971)
Round or trough hatches
Photo-etched metal roofwalk
Separately applied wire grab irons and stirrup steps
Numerous detailed outlet versions
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Multiple roadnumbers
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly-detailed, injection molded body
Separately applied brake wheel
Screw mounted trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
HO Intermountain 4-Panel Coalporter, Canadian National
CNA Website scheme
Features:
Sharp Painting and Lettering
Prototype Accurate Paint Schemes
Multiple Road Numbers
InterMountain 100 Ton Trucks with 36in Metal Wheelsets
Metal Knuckle Couplers
Fine Turf - Soil
25.2 Cubic Inches Per Package
Use Soil Fine Turf to model realistic grass, low ground cover and for highlighting and accenting landscape. It is colorfast and blends naturally with other foliage. Use for any scale.
48Ft All Purpose Well Car - TTX #456418
Features:
Floor with correct ovals and cut-outs.
Two hitches
Etched walkways
Four IBC bins.
Detailed brake components
Prototypically accurate paint schemes
Recommended 24inch radius
AK Interactive 67 DAK Vehicle Streaking Grime Enamel Paint 35mL
Enamel type streaking for modelling.
Grimy grey colored effect ideally suited for creating streaks of dirt over sand and light colored surfaces. Also suitable for other effects such as add chromatic richness to any piece or surface.
Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moistened in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Erie Lackawanna
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Tangent Scale Models HO 33010-02 Greenville Canadian Pacific 6,000CuFt 60ft Double Door Boxcar- "Delivery Red 3-1996"- #205007
Product: Greenville 6,000CuFt 60′ Double Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton Barber S-2 trucks with rotating Timken caps and separate brake beam part
Wheels: CNC-Machined 36″ Wheels
? Canadian Pacific CP ?Delivery Red 3-1966? shows the as-delivered red scheme, applied by Greenville Steel Car, Co. CP rostered 35 cars in this March of 1966 group. The prototypes featured the fantastic CP script lettering across the full side of the carbody. There was no doubt who owned this car when it passed by trackside! The model features the correct carbody details for March 1966, with the wider 46? 3? truck centers, high ladders and an Apex-style running board. Check out that beautiful roof overspray on the Stanray diagonal panel roof. On the ends, the model is equipped with an accurate Ajax power brake, Modern brake wheel and Apex brake step. Underneath, the model has an accurate Keyston Center-Of-Car cushioning (COCC) underframe with truck mounted brake hardware. Yes, that means no brake cylinder part ? the underframe brake piping routes to small brake cylinders on the brake beams of the trucks. This model is equipped with 100-Ton Barber S-2 trucks with rotating Timken caps. The decoration on this model is gorgeous, from the CP script lettering down to the Ford-service return route box to the Canadian Pacific Railway in Windsor, Ontario. These models are ready for cross-border auto parts service on your railroad.
Esso Service Station (1946-1965)-Gas Stations - Waterslide Decal
1/2 inch OD Round Aluminum Tube - 0.035inch Thick x 12inch Long
Round Aluminum Tube (1 pc)
Outside Diameter: 1/2 inch
HO USRA Single-Sheathed Boxcar: N&W
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Norfolk Southern G41A Repaint 1976 w/o Hoods PRR Shops G41A Coil Car
NS GP67 Repaint 2005+ is an exciting release for us. NS rebuilt some of their G41A cars around 2000 and placed them in the GP67 class. These rebuilds were changed from 6 troughs to 5 troughs to accommodate larger diameter coils. This major change, along with yellow trough bracing, makes these cars really stand out in the crowd. The Tangent offering picks up in 2005+, where the NS cars have received their conspicuity stripes. The troughs received not-so-subtle wide white stripes down the centerline of the car to assist loading. If you read the data carefully, you will find accurate 50 Year Life Extension stenciling and painted diamonds labeling the cars for HOT steel coil service. The 125-Ton trucks feature NS reporting mark and car numbers along with 38in wheels and rotating Timken caps. These are some HOT cars for the modern era.
SPECIFICATIONS:
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
HO 1/87 New Look Bus (Deluxe) - Los Angeles SCRTD #1020
The Rapido Trains HO scale New Look Bus models features:
-Correct tubular profile traced from a 3D-scan of a real New Look Bus.
-Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
-Optional left-side emergency exit door and either single- or dual-stream rear doors
-Full interior including separate bench seats and grooved flooring.
-Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
-Steerable front wheels and REAL rubber tires.
-Three types of bumpers − steel, water and rubber.
-A wide variety of optional detail parts included.
-Separate advertisement frames included with each model.
-Pre-installed route destination signs for added realism.
-Working interior lights, headlights and tail lights.
-Installed as appropriate
A 9-12 volt DC power supply (not included) is required to power the lighting features.
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - DEAX #11280
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
106 Plastic-Compatible Grease with PTFE
Labelle grease with PTFE--
Just a -dab- will work wonders, put a -dab- on the exposed gear box and run a minute or so, then add another -dab- and it will work its way throughout the gear box and worm gear.
Additional Suggested Uses:
Model Trains: Exposed or Enclosed Gear Boxes (all scales)
RC Models. Exposed or Enclosed gear boxes on all RC models of all sizes and type. Shock Absorbers
Slot Cars: Exposed or Enclosed gear boxes on Slot Cars of all Sizes
Bicycles: Enclosed cable rub points, gears.
Fishing Reel mechanisms
Other uses: Enclosed gear boxes on all sorts of Household items, squeaky door hinges, Riding toys, mechanical toys of all types.
--PTFE has been called -the slickest substance known to man- is is the parent chemical of -Teflon- which is registered trademark of Dupont Chemicals.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Oak Ridge Waste and Recycling #0005
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
60Ft PS-1 Boxcar - Grand Trunk Western - Blue #383321
Beginning in the 1960s, automakers approached rail carriers with the desire for larger freight cars to transport auto parts from suppliers to manufacturing centers. In response, the 60Ft auto parts boxcar was introduced. Carrying a wide variety of auto components including engine blocks, transmissions, brake drums, and others, these cars were a fixture throughout North America for the next four decades and can still be found in service today. Often times, entire trains of auto parts and related cars could be seen near major production facilities as automakers switched to just-in-time delivery methods, requiring prompt deliveries from the railroads providing service. It was common to see trains consisting of 50Ft, 60Ft, and 86Ft boxcars, specially modified flat cars to carry lightweight chassis, and autoracks all destined for one auto or truck manufacturing facility. As the auto industry supply chains evolved and manufacturing facilities were consolidated, many of the 60Ft boxcars were used in other markets and could be found hauling a variety of goods including appliances, paper goods, cardboard, and similar items.
HO ICC Caboose w/Lights - DCC Ready - Seaboard #5663
ETA: April 2022
Detailed Information
The ultimate detail with the best Genesis features.
International Car Co. began specializing in caboose production as early as 1941. When the railroads entered the 1960s, many needed to replace their aging, in some cases home shop built, cabooses. International Car responded with a product that could be tailored to each railroads specific needs. Using quality components and modern engineering, ICC became a leading name within the industry.
Sharing ICCs commitment to quality and modern techniques, Athearn has not only recreated these iconic cars, but reinvented the quintessential features a Genesis caboose should have.
DCC lighting as a base standard with the option for sound will add a whole new dimension to operating sessions. Protect reverse moves and simulate train brakes, begins to scratch the surface to the new dimension of realism.
Seaboard Air Line FEATURES:
Each caboose has a different safety slogan
Friction Bearing Trucks
Separately applied non-functioning marker lamps included
ICC CABOOSE FEATURES:
Better than brass detail including roadname and road number specific detail and laser-sharp painting and printing
Interior seating for the addition of crew figures.
See-through end platforms and steps
Flush window glazing
Wire-form grab irons
Caboose trucks with animated rotating bearing or static friction bearing caps
Axle generator details
Body-mounted McHenry scale knuckle-spring Couplers
Machined metal RP25 profile wheel sets
Fully-assembled and ready-to-run out of the box
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Separate wireform grab irons, etched metal coupler platforms
Coupler lift bars, trainline hoses, brake hoses, and hardware
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Weighted for trouble-free operation
Multiple road numbers
Minimum radius: 18inch
LED LIGHT EQUIPPED FEATURES:
LED lighting for long life and reliable operation
On-board DCC Decoder by NCE – Operates in DCC and Analog (DC) with lighting functions controllable in DCC
Various classes will feature single or dual roof markers, or end-mount marker lights, per prototype and/or era
(not all cars have marker lights)
LED Interior Lights
All functions NMRA compatible in DCC mode
Acrylic Flat Colors - Flat Black - 3/4oz (23mL) Bottle
XF-1
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
HO GE 44 Tonner Phase Ic - DC/DCC/Sound - Southern Pacific (Tiger Stripe) #1901
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
HO PC&F 5241 CUFT - Boxcar - Pan Am - (B&M) - Single Car #3303
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Maxwell Ave. Home - Kit
The Rix Maxwell Ave. House kit is modeled after mid western homes built during the 1930s and 1940s.
They feature clapboard walls, asphalt roof and brick porch.
The Rix Maxwell Ave. House kit come in three versions.
Kit number 201 is a small house with no porch.
Kit 202 is a house with front porch.
Kit 203 is a house with side porch.
Kit 204 is the porch only.
Rix Maxwell Ave. House is molded in three colors.
Roof, Brown.
Walls, White.
Brick Porch, Red.
Dimensions:
28 wide x 31 deep scale feet
3-7/8 x 4-1/4 inches
HO Conveyor Bridge & Support Tower - Photo-Etched Brass Kit
Product Information
The Walthers Cornerstone HO Scale Conveyor Bridge and Support Tower add realistic detail for any modern grain-handling operation. Also great for adding detailing at other Cornerstone HO Scale industrial buildings requiring open-air walkways and conveyor supports, this detail kit consists of highly detailed photo-etched brass parts with near-scale thickness. The Conveyor Bridge and Support Tower is easy to assemble and paint.
Builds one tall or two short towers
Use with Wet-Dry Grain Bin (933-2937, sold separately)
Fine handrails and trusses
See-through walkways
HO SP 3/4 Dome-Lounge w/Fluted Sides - Southern Pacific (Daylight) #3605
-Shasta Style
Rapidos SP Dome Lounge Cars Features:
Designed from original blueprints and field measurements of existing cars
Two fully-detailed interior configurations
Multi-colour interior decoration
Two underbody arrangements
Accurate interior and exterior paint and decoration
Full flicker-free track-powered interior lighting
Lighting (prototypically) in the dome roof
Accurate free-rolling trucks
Metal magnetic knuckle couplers
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - PTTX #93493
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Evans X72 Box car: Conrail Large Logo - Single Car #269423
Detail Variations:
As operated between 1976 to the 1990s.
6-pack includes the following numbers:
#266873
#266899
#269252
#269325
#269377
#269423
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
Evergreen Scale Models 103 Opaque White Polystyrene Strips 14in .010x.060 (10pcs pkg)
N Scale Laser-Cut 2-Lane Curved Wood Grade Crossing - 28-32in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights.
HO FM H-24-66 Trainmaster - Gold LokSound & DCC - Canadian Pacific (Late Scheme) #8917
the prototype for this detailed Atlas HO Scale Master Gold FM H24-66 Phase 1A Trainmaster was advertised by Fairbanks-Morse as "the most useful locomotive ever built." Introduced in 1953 as a versatile locomotive with various equipment options available, it was found in both passenger and freight service across the US. It was the most powerful single-engine locomotive in production at the time, generating a total of 2,400hp. This detailed model features accurate decoration and roadname-appropriate detailing. It also features a five-pole, skew-wound motor with dual flywheels, directional LED lighting, Accumate(R) magnetic knuckle couplers, accurate decoration and other roadname-appropriate body details. This replica comes equipped with a dual-mode ESU LokSound Select sound and DCC decoder for operation on DCC and DC layouts (with limited sound capabilities on in DC operation). The FM H24-66 is one of many Atlas HO Scale locomotives.
Features:
Separately-applied door handles
Real metal springs on trucks
Realistic die-cast underframe
Five-pole skewed armature motor with dual-flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate couplers
Painted crew figures
Separately-installed fine scale handrails
Etched metal radiator grilles
Electronic Dual-Mode Decoder (e-DMD) (Gold Series only) that allows your locomotive to run in DCC or DC
NMRA 8-pin plug for DCC (Silver Series only)
Railroad specific details (Lighted classification lights on some models
Atlas Master Series Silver Additional Features:
NMRA 21-pin plug for DCC (Decoder-ready)
Sound Features for Gold Series:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F31 .
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes ?on the fly? are provided for true realism.
HO GE AC4400CW - DCC & Sound - Kansas City Southern KCS #2001
Detailed Information
KCS FEATURES:
As-delivered appearance
Large plow
High mount number boards
Walkway mounted ditch lights
Mid production units
5-chime horn
GE style self-steering trucks
KCS, being a long-time customer of EMD locomotives, turned to GE in late 1999 for 50 AC4400 units. They were factory painted in their then-current grey scheme. By 2006, they were renumbered to the 4575 series. KCS started to repaint them into their -Southern Belle- scheme in 2013.
AC4400CW SERIES LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
LED lighting adjusted to lifelike settings.
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
Illuminated marker lights (where applicable)
Etched, see-through walkway steps
Animated roller bearing caps
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
Brass horns correct to the prototype
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO GE ES40DC - DCC & Sound - Norfolk Southern #7511
ETA: June 2023
Detailed Information
NS FEATURES:
K5HL horn
Electronic bell
High cab headlight
High mounted rear headlight
Large plow
Rear anticlimber
Alternating front and rear ditch lights (Function in DCC mode)
ROAD NUMBER SPECIFIC FEATURES:
#7500
As-Delivered paint scheme
#7508
As-Delivered paint scheme#7511
#7511
As-Delivered paint scheme#7561
#7561
Unique primer painted version
ES44 SERIES LOCOMOTIVE FEATURES:
Illuminated ditch lights
Tinted cab windows
Large antenna dome
GPS dome
Hand brake panel grille
Nathan K5HL horn
5000-gallon fuel tank
Low or high front headlight per prototype
See through dynamic brake intakes
Low or high front headlight per prototype
See through dynamic brake intakes
Short auxiliary cab rear left-side doors
Right side forward electrical cabinet with X-Panel
Engine compartment side grab irons (Non-CP Units only)
No engine compartment side grab irons (CP Units only)
Flush radiator compartment doors
Flush heat exchanger housing and top radiator grilles (Non-CP Units only)
Raised heat exchanger housing and top radiator grilles (CP Units only)
Dynamic brake exhaust vents spaced per prototype
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO FMC 60ft Hi-Cube Ex-Post Boxcar - UP/Brown #560332
MODEL FEATURES:
- Single 10ft Youngstown door
- Separately applied grab irons, end ladders, and brake wheel
- Photo-etch coupler cross-over platform
- Highly-detailed, injection-molded body
- 36 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Weighted for optimum performance
- Minimum radius: 18 inches
HO Scale GP38 - DCC & Sound - CSX (Grey/ G Scheme) #2039
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO Flexible Textured Freight Car Load Sheets - Scrap Metal
Product Information
Add realistic loads to open freight cars or trucks (sold separately) with these unique loads from Chooch Enterprises. Molded in flexible vinyl thats easily cut to fit with scissors or hobby knife, each features realistic texture and surface detail, and can be finished with most acrylic paints (sold separately) for added realism.
Measures: 11 x 3inch (27.9 x 7.6cm)
N Scale Arch Bar Truck Sampler Pack (2 Pair)
DESCRIPTION
N Scale Package includes 1pr short and 1pr (#302001 & 302004) long extension assembled Magne-Matic couplers.
HO EMD SD70ACe - DCC & Sound - UP/Spirit of UP #1943
Brand new UP heritage locomotive 1st time offered removable PTC antenna array roof secured w/ magnets Nose mount headlight and ditchlights now LED Late handrails SD70ACe AND SD70M-2
SPECIFIC FEATURES: New for the SD70ACe and SD70M-2, LED lighting Correctly-sized operating ditch lights Snowplow Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or -tube- style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Jacking pads per prototype
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
HTCR or HTSC trucks per prototype
Non-sound QuickPlug equipped with NEM 21-pin DCC plug
McHenry scale knuckle spring couplers
Minimum radius: 18inch
Recommended radius: 22inch
SOUND EQUPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Evergreen Scale Models 109 Opaque White Polystyrene Strips 14in .010x.250 (10pcs pkg)
HO 30-Series Plastic Couplers w/Gearboxes - Medium (9/32in) Overset Shank (2pair)
This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #32 Magne-Matic Metal Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom.
Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox.
The 142 Whisker Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #32 Coupler. The Whisker Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.
PACKAGE INCLUDES:
(2) Pair #32 Plastic Shank Couplers - Medium Overset Shank
(2) Pair #621 Torsion Centering Spring
(2) Pair #233 Gearboxes & Lids
(2) Pair #210 Washers
(2) Pair #256 - 2-56 Screws
(2) #622 Knuckle Springs
#32 Plastic Coupler Features:
-Material - Metal Knuckle, Plastic Coupler Shank
-Shank Length - Medium (9/32in) (center hole to back of coupler head)
-Coupler Offset - Overset
-Knuckle Spring - #622
-Centering System - Standard Shank
-Centering Spring - #621 Torsion Centering Spring
-Head - Standard Head
-Works With - #233 draft gearboxes
HO 45Ft Trailmobile Dry-Van Trailer - CP Transport #5473
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
18.5 ml - Gives any metal the look of fine pewter casting. Great for figures or special effects
40 Ft Modernized Box - NSRC #430
Era:1970s+
MODEL FEATURES:
Fully assembled and ready for your layout
Underbody with brake system details
Many of these schemes were frequently in lumber service. On the prototype, it was common to find these in strings of 4 or more within a lumber train.
New 3-packs make modeling lumber service easy (total of 6 unique road #s)
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE AND BACKGROUND INFO:
Railroad boxcars are perhaps not only the best-recognized pieces of equipment ever put into service but also one of the most identifiable symbols of the industry itself. During the early years of the industry freight was hauled on simple flatcars or early gondolas. In Upstate New York was the burgeoning Mohawk & Hudson Railroad, the first chartered system in the United States which later became part of the New York Central, came up with the novel idea of covering its gondolas in 1833 since the railroad dealt with snow throughout much of the winter. The cars development continued to improve over the years such as switching from basic wood construction with steel outside-bracing, within the same size specifications; 40 feet, a standard size employed by the American Association of Railroads (AAR). To better enhance crew safety, in 1968 the AAR legislated the removal of roof walks. The 40 foot boxcars needed to be -modernized- to adhere to the AAR mandate. This was to be completed by 1978 for cars in interchange service. Some of these cars had side and end ladders cut down, in some cases, modification included lowering the brakewheel. What made boxcars great, at least in the eyes of the railroads, was, their ability to haul about anything! Railroads thrive on redundancy to maximize efficiency.
HO 85ft Pullman-Standard Regal Series 4-4-2 Sleeper - Lighted - BNSF (Cajon Pass) #66
Passengers on your Walthers Proto Combined Super Chief/El Capitan are sure to have a memorable trip aboard the 85ft Pullman-Standard 4-4-2 Regal series Sleepers! Santa Fe purchased 16 of these spacious sleepers, fitted with four double-bedrooms, four compartments, and two drawing rooms for postwar Super Chief service, which were later used on other name trains and served with Amtrak.
Ready for operation or display, features of this Walthers Proto replica include:
- Real metal finish simulates stainless steel
- Correct GSC 41-NDO Outside Swing Hanger trucks as used in the 1960s
- Factory-installed grab irons
- Prototypically accurate window tinting
- Window gasket details as appropriate
- Sprung operating diaphragms
- Modeler-installed extended drawbars for 22 inch radius curves included
- Turned metal RP-25 wheelsets and correct trucks with built-in electrical contacts
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24 inch radius is recommended for operation.
HO 89ft Flatcar w/ Bi-Level Open Auto Rack - Baltimore & Ohio Rack, Trailer Train Flatcar (TTBX) #962934
Product Information
Expand auto traffic on your 1960s and early 70s HO layout with a fleet of WalthersMainline 89ft Flatcars with Bi-Level Open Auto Racks. Designed for light trucks and similar larger vehicles, the prototypes entered service in 1968 and featured open sides. Features of these layout-ready cars include:
One time run of these road numbers, order now - limited quantity available
Prototypes in service 1968 to 1970s
Designed especially for carrying light trucks and similar large vehicles
NEW - Die cast metal underframe for improved performance
NEW - Swinging drawbar for operation on 24inch radius curves
NEW - Retooled underbody details
NEW - 70-Ton roller bearing trucks
NEW - Correctly placed roadnames placards as appropriate
NEW - Build as early with bridge plates or later versions with no plates
Detailed flatcar with factory-installed Paragon II rack
Colorful period paint and lettering
Correct 33inch RP-25 turned metal wheelsets
Proto MAX metal knuckle couplers
HO 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - GE Rail Services Corporation/ITLX #30320
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Prototypes in service from late 1980s to the present
- Separately molded and applied hopper gates
- Correct 36 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
Angus Van: Toronto, Hamilton & Buffalo #82
The Angus Van features:
Super-detailed underbody including all separate air and brake piping
Super-detailed Barber-Bettendorf caboose trucks
Full multi-coloured interior with proper floor texture
Interior handrails and opening windows in the cupola
See-through, etched metal end platforms and steps
Full end detail, including uncoupling levers
Separate grab irons installed at the factory
Improved, full interior lighting with all-wheel pickup and better rolling trucks
Operating red marker lights
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
Grand Trunk Western GP38AC Bicentennial 1976+
HO 50ft NACC Boxcar - Alumax #50187
MODEL FEATURES:
- Three road numbers
- Applied metal grab irons and etched end platforms
- Pullman Standard or Superior plug doors
- Pullman Standard or Stanray (Superior) roof (to match prototype)
- Ready-To-Roll 70 ton trucks
- Machined 33 inch metal wheels with RP25 contours
- Body mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Minimum radius: 18 inches
- 1946 Whitehead & Kales Car Carrier Resin Cast Kit
HO 50ft Evans DD Plug Boxcar - HS #11481
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO Chemical Tank Car - Gen Am Marks Co #63814
MODEL FEATURES:
- Separately applied brake wheel
- Wire form safety handrails
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Machined metal wheels with RP25 contours
- Highly-detailed, injection-molded body
- Minimum radius: 15 inch
- 3-packs feature unique road numbers
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - Trailer-Train with B&O Bulkheads #90605
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO SD38 - DCC/Sound - Conrail (NS) #3818
ROAD NUMBER SPECIFIC FEATURES:
#3805
- White patch with black numbers
- faded paint effect
- triple clasp brakes
- large fuel tank
- rear mounted Leslie 3 chime horn
- front ditch lights
- angled cab roof antenna
- Prime A/C
- small EMD plow
#3818
- Black patch with white numbers
- faded paint effect
- triple clasp brakes
- large fuel tank
- rear mounted Leslie 3 chime horn
- front ditch lights
- cab roof antenna
- Prime A/C
- no plow
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
GATC 20,000-Gallon GS Tank - GATX/Cargill (3)pkg
MODEL FEATURES:
- Fully-assembled and ready to run out of the box
- All models are representative of prototypical paint schemes
- Weighted for trouble-free operation
- Body mounted McHenry operating scale knuckle couplers
- 70 or 100-ton Roller Bearing trucks with animated spinning bearing caps per prototype
- 33 inch (70-ton) or 36 inch (100-ton) machined metal wheels with RP25 contours operate on all popular brands of track
- Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
- 3-Packs feature unique numbers not available separately!
- Highly-detailed, injection-molded body
- Separately applied brake wheel and ladders
- Painted and printed for realistic decoration
- Replacement parts available
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Perfect starting point for adding grime and rust
- Faded base colors matched to the prototype
Surface Water - Water Ripples
Water Ripples goes on clear and dries clear to create ripples and windswept surfaces. Customize your water colors by adding Water Tints or create whitecaps and foamy water with White Water Highlight.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
HO Large Cut Stone Culverts w/ Wings - Kit
The Rix Cut Stone Culverts are available in two stone sizes. (small stone shown) These Cut Stone Culverts can be used in a variety of scales. The Cut Stone Culvert measures 5-1/2 inches wide by 3 inches tall. The Arch opening is 2-3/4 inches by 2-1/8 inches tall. The wings measure 3 X 3 inches making the total length 11-1/2 inches long. The smaller scales (N and Z) can use the Cut Stone Culvert as a tunnel portal. The Rix Cut Stone Culverts are molded in gray plastics. Kit?s include 2 Cut Stone Culvert and 4 Cut Stone Wings. (1 pair)
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
Evergreen Scale Models 4125 .125in Opaque White Polystyrene V Groove Siding (1sheet)
HO 100-Ton Open Hopper - Upper Merion Plymouth #7430
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
Deep Pour Water - Clear
Create underwater features with Deep Pour Water and Water Undercoats for submerged water scenes or to imitate depth. Add Water Tints when modeling any aquatic ecosystem and Surface Waters for the illusion of water movement and undeniable realism. Deep Pour Water dries hard and will not crack, is non-shrinking, and will not become discolored over time.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
HO Railroad Yard Crew - pkg(6)
53Ft Railgon Gondola - Ready To Run - Delaware & Hudson #15010
(black, white, large name)
Product Information
A must-have model for any HO layout from the 1980s to the present, the WalthersMainline 53Ft Railgon Gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53Ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America. A great addition to your HO freight car fleet, the models feature:
Based on Railgon 310000 series cars
Used in nationwide pool service from 1980 to the present - many later leased and relettered by new operators
Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
100-ton roller-bearing trucks
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO EMD SW1200 - DCC/Sound - Penn Central (ex NH) #9186
(Flexicoil Trucks)
Note: #9186 will NOT feature the larger Penn Central lettering on the hood.
The HO Scale Rapido SW1200 features:
- Designed from original blueprints and field measurements
- Heavy diecast frame, chassis and gearboxes for superior pulling power
- Rapidos renowned silky smooth-running drive system
- Working cab interior light and inspection lights
- Fully detailed Type A or Flexicoil trucks, as appropriate
- Full cab interior with working cab interior light and non-working fire extinguisher and fridge (where appropriate)
- Working headlights and illuminated number boards at both ends
- Some models have a rotary beacon or flasher/strobe as appropriate
- Separate handrails, including crash bars inside the cab
- Multiple exhaust stack and battery box door styles
- With or without working drop steps, as appropriate
- Incredible underbody piping and conduit detail - a Rapido hallmark!
- DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings from a 567 prime mover
HO Dash 9-44CW - DCC/Sound - BC Rail #4649
BCOL FEATURES:
- Canadian style anti-climbers
- K5LA horn
- Operating rock lights
- No air conditioner
DASH 9-44CW SERIES LOCOMOTIVE FEATURES:
- Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
- Etched, see-through walkway steps
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
6mm Static Grass - Straw (20g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
Acrylic Flat Colors - Sea Blue - 3/4oz (23mL) Bottle
XF-17
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #20016
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Code 83 Snap Track - 22 Inches Radius Curve
Brown Tie - 22.5 degrees per sections
HO 50ft PS-2 CD 4427 Covered Hopper - Northern Pacific #76290
Add a signature car to your covered hopper fleet with the Walthers Mainline 50ft Pullman-Standard PS-2 CD 4427 3-Bay Covered Hoppers!
Fully assembled and finished in a variety of colorful schemes perfect for 1960s to early 2000s layouts, features include:
-Limited edition - one time run of these car numbers!
-Prototypes handled all types of grains, feed and similar loads
-Matches prototype dimensions
-See-through running boards
-4-3-4 exterior rib pattern
-Bottom outlet gate details
-Placard name plates as appropriate
-Correct 36in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
Athearn - HO RTR PS-2 2600 Covered Hopper -Winchester & Western - #4004
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
SmokeBox Graphics Freight Car Data circa 2015
Decal set includes freight car data often missing on other sets along with some updated labels. Sheet includes mostly boxcar data, including door markings, weights, and dimensional data in a common font. Also includes TREAD COND SHOES brake shoe markings, red brake shoe labels, and green cleaning stickers