HO 36ft Old-Time Wood Boxcar - Chesapeake & Ohio #6340
HO New Look Bus Denver TramWays
Destination Sign:
20-Fitzsimons
Detail Variations:
Left-side Emergency Door
4-window exit door
Early-style engine door
Standee Windows
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286365
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
Ballast Bag - Fine Iron Ore (21.6 in3)
Realistically model railroad track, crushed rock, and stones.
Easy to use and colorfast.
HO MLW M630 - DC/DCC Ready - CP Rail (Multimark) #4573
8inch stripe w/ water expansion tank and ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC non sound recommended decoder for
Current Production (21 pin socket)
ESU #59629 (8 Functions)
or
TCS #EU-821 8 function decoder
HO SD60M Wide Cab Diesel - DCC & Sound - Union Pacific, As Delivered #6364
Expected in May 2022
Detailed Information
UP FEATURES:
Large EMD plow
Front ditch lights
Nose headlights
Included in this run of UP SD60Ms are both early and current versions. These locomotives were used in just about every service, hauling coal and fast intermodel, to drag freights and locals. As of a few years ago, a small batch were taken out of retirement, repainted and sent back out to work.
We are offering both as-delivered and current versions to satisfy UP modelers in different eras.
ROAD NUMBER SPECIFIC FEATURES:
#2442
Post 2018 repaints with flag and wings scheme
yellow sill
modern PTC antenna setup
Nathan M-3 horn.
#2457
Post 2018 repaints with flag and wings scheme
yellow sill
modern PTC antenna setup
Nathan M-3 horn.
#6317
As-delivered appearance in 1993. Red-sill
Leslie 3-Chime horn
fire cracker antenna.
#6364
As-delivered appearance in 1993. Red-sill
Leslie 3-Chime horn
fire cracker antenna.
LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully-assembled and ready-to-run
Replacement parts available
Minimum radius: 18inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO H-6-G - DCC & Sound - Canadian National Railway (Tilted Wafer) #1359
Update on the CNR H-6 Project: This project is on hold for now, but Rapido is still accepting pre-orders and will start tooling once they have reached enough orders for the H-6 project to be viable.
Rapidos H-6 will feature many optional details to accurately portray H-6s in several configurations and sub-classes, including:
Coal (with or without an extended bunker) and Oil tenders
Wood or steel cabs
Manual or power reversers
Vertical or horizontal slat pilots
Two different bell locations
Two different headlight sizes
The H-6s drive will incorporate our smooth-running gear drive with flywheel allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for ultimate realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido Trains HO scale CNR H-6-d/g Ten-Wheeler locomotive features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light-
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!--
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
please note:
-Not all lighting effects available on Silent versions.
--User-controlled sound features only accessible on DCC layouts.
HO Scale Freight Pallets - 8pkg
This laser cut kit includes 8 easy to assemble pallets. Please see the parts picture. One part has peel and stick adhesive on both sides. The other two parts are the front and back of the pallets. The pallets in the picture are shown unpainted.
Steam Generator Stack for ALCO RS-1/-3 (Brass Casting) - Unpainted
HO EMD GP40 - DCC & Sound - MKT (Green & Yellow) #216
1982+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO Scale Angled Back Alco Diesel Number Boards - pkg(4)
Product Information:
Plastic boards and brackets, with photo-etched brass fronts for large or five-digit style numberboards.
HO Lightweight Coach - Missouri Pacific - Jenks Blue #477
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO 73Ft Center Partition Car - BNSF (H1) #562712
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
HO 57ft Mechanical Reefer - Union Pacific/ARMN #756010
Move all kinds of perishable products on your HO railroad with Walthers Mainline 57ft Reefers! Based on cars built by Pacific Car and Foundry (PC&F) for Pacific Fruit Express and several railroads from 1967 to 1968, the prototypes roamed far and wide serving growing areas, cold storage plants and regional grocery distributors into the early 2000s.
Fully assembled in colorful period schemes, nicely detailed and affordably priced, check out all the features including:
-Limited edition - one time run of these roadnumbers
-Prototypes moved all types of fresh fruit and vegetables, plus canned and frozen foods
-Keystone or Hydra-Cushion underframe detail as appropriate
-Short ladders and low hand brakes
-9ft Youngstown plug door with separate latch bars
-Authentic Stanray peaked, ribbed roof with capped exhaust stack
-Detailed underbody with brake gear and fuel tanks
-70-ton roller bearing trucks
-Correct 33in turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
SN2AB - N Scale Mainline Signaling Kit
N scale Mainline Signaling Kit including:
- 2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws.
- Makes all of your signals plug n play with small 10 pin connectors.
- Can be used as a basic N scale signal.
- Mounting board and hardware included.
- Current setting resistors are built in to the board.
- Easy mainline setup with A and B mast configurations.
- Pads are provided to make it easy to attach any signal to the mast base.
- This product is intended for use with the SE74.
The Digitrax Plug N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE74 signal driver cable.
This product is intended for use with the SE74 and other Digitrax signaling decoders.
HO EMD GP40 - DCC Ready - Wisconsin Central #3014
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Talus - Fine Gray (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings, and/or road cuts. Intermix grades and blend shades for the most realism. Color natural talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle talus and secure with scenic cement (#191).
Particle size - Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
HO Peterbilt 389 Sleeper Cab Tractor w/Pneumatic Bulk Trailer - Laidlaw
(silver, red, chrome)
Fox Valley Models N Bi-level Auto Rack
Conrail
Features:
Die-cast underframe
Finely Molded Details
Etched Metal Panels
Formed Wire
Sharp Painting & Lettering
Multiple Road Numbers
Die-Cast Underframe
Metal Wheelsets
Micro-Trains Trucks & Couplers
HO Scale - HO 30,000 Gallon Ethanol Tank Car - UTLX - #2 - 3pack
212883, 212887, 212893
Detailed Information
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
HO EMD SD70ACe Diesel - DCC & Sound - Norfolk Southern (Savannah & Atlanta Heritage) #1065
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
NS FEATURES:
Swapable alternate roof with leader PTC antenna array
(Also available separately [ATHG68899])
High-mounted headlight
Isolated cab
Front and rear illuminated ditch lights
Late handrails
Norfolk Southern - Heritage
In 2012, Norfolk Southern unveiled a group of 20 locomotives painted to honor their predecessor roads. In the late 2010s, the units had their roof configurations modified to accept Positive Train Control antennas. Both roof styles are included.
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
0.023 inch Thick Stainless Steel Flat Strip - 1/2inch x 12inch
Stainless Steel Flat Strip 12inch Long (1 pc)
HO Blue Star Ready Mix - Kit
Product Information
The Walthers Cornerstone Blue Star Ready Mix brings a widely used prototype to your diesel-era railroad. Chances are your concrete basement or layout room started out at a plant just like this! Concrete is one of the oldest building materials, dating back to 500 BC. Today, it is the most frequently used construction material, combining low-cost, durability and strength with extreme versatility. It can be molded to almost any shape so its used to build everything from roads and buildings, to birdbaths and railroad ties! Although concrete used to be mixed at the job site, modern projects require a consistent mixture thats more easily made at a ready mix plant. Both fine (sand, gravel, small pebbles) and coarse (blast furnace slag) aggregates arrive by rail, along with powdered portland cement. These ingredients are then mixed with water and air to create concrete that meets each customers specifications. When ready, the material is loaded in mixer trucks for delivery. Blue Star Ready Mix will be a great customer for your contemporary HO railroad. Its tall profile captures the look of the real thing without overwhelming other structures and scenery. The easy-to-build kit is complete with an elevated control room/office, along with realistic piping, materials elevator, dust collector and ladder details.
Blue Star Ready Mix is just one of a wide variety of Cornerstone industrial buildings.
Prototypical loading tower
great for diesel-era scenes
Attached office
Realistic piping
Molded in appropriate colors
Easy-to-build plastic kit
Measures: 7-3/4 x 8-1/8 x 11-3/4inch (19.3 x 20.3 x 29.3cm)
Tangent Scale Models HO PS4750 Covered Hopper - KCS - Delivery Brown
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
KCS -Delivery Brown 12-1979- The KCS scheme is simple and eye-catching, with the tall KCS reporting marks, white circle delineators and brown matching trucks. The center sill correctly models the brake linkage access holes on one side of the car, just like the real ones. This is a big scheme, and we know our KCS customers have been a patient group. Our KCS terra cotta colored masterpieces accurately depict their Pullman-Standard prototypes.
HO RTR 52Ft Mill Gondola - Washington Central #30003
Detailed Information
MODEL FEATURES:
Body-mounted McHenry operating scale knuckle couplers
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Razor sharp painting and printing
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO Scale RTR 85 ft Budd 10-6 Sleeper - Amtrak (Phase IV)
(Phase IV, silver, wide blue, thin red and white stripes)
Product Information:
Add more seating on your classic streamliner quickly and easily with this Walthers Mainline HO Scale 85ft Budd Small-Window Coach! Nicely detailed, affordably priced and built tough for years of dependable service, this car is based on fluted-side cars used my many North American railroads. 85ft Budd Small-Window Coaches are perfect for use with other Walthers Mainline HO Scale streamlined passenger cars.
Based on streamlined cars used by many roads
Eight authentic car types
Operates on 18in radius curves
Correct prototype 85ft length
Tinted window glazing
Fully assembled, ready for fun on your railroad
Rugged construction for years of service
Detailed body
Full interior
Correct 36in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
LED interior lights available separately
Molded drill starter points for add-on wire grab irons (sold separately)
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Chesapeake & Ohio C&O #5003
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Illinois Cereal Mills Cargill ICMX #1014
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. They have worn a wide range of colorful paint and lettering schemes over the years, 59ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59ft Cylindrical Hoppers feature:
Limited Edition - one time run of these roadnumbers!
Model of a National Steel Car 4550 cubic foot car
Fully assembled, ready to run
Thousands used in North American grain and potash service from 1972 to the present
Trough or round loading hatches as appropriate
Four different car numbers for each roadname
See-through running boards
Detailed brake gear, roof hatches and end ladders
Correct 36In turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers
SoundBytes Transformer Hum
The SoundBytes Transformer Hum is a simple, fully self-contained sound module that plays a background hum reminiscent of an electrical transformer or substation. Add some ambiance to your layouts electrical infrastructure!
Best played at a low, understated volume.
FEATURES:
- Integrated speaker & volume control
- Easy to install and use
- Powered from 5V to 24V
Electrical Connections:
The SoundBytes module needs 5-24 volts of clean direct current (DC) power to operate. Connect the white wire to GND to activate the sound. Leave the white wire disconnected when not in use.
Red Wire = 5V to 24V
Black Wire = GND
White Wire = GND to activate
Note: Please do not use old model railroad power packs as a DC supply. These often produce large output spikes far in excess of their nameplate voltage ratings, are not suitable for powering modern electronics, and will damage SoundBytes modules.
The volume can be adjusted by using a small screwdriver to turn the white, square potentiometer on the PCB.
Specifications
1.25(L) x 1.25(W) x 1.25(H) inches
HO 54ft 23K Funnel-Flow Tank Car - Corn Products #1988
Add variety to your modern HO fleet with these WalthersProto replicas of the 54ft 23,000-Gallon Funnel-Flow Tank Car! Packed with details including the unique funnel-shaped body that speeds unloading on the prototypes, other features include:
- One time run of these roadnumbers, order now - limited quantity available!
- Introduced in the 1960s, still built and operated today
- Prototypes handle all types of petroleum and food products
- Etched metal walkways and platforms
- Factory-applied grab irons
- Brake train pipe and brake rigging underbody detail
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling metal axles and 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
Models depict in-service locomotives from the mid-1990s and beyond.
Road name and road number-specific painting and lettering.
Multiple road numbers offered.
New and improved high-torque motor and drive mechanism guarantees smooth operation.**
Operating radiator fans. Improved radiator fan drive unit with quieter operation and selective fan control.**
All-wheel power pickup and all-axle drive.
Heavy die-cast, zinc alloy chassis.
AuroraJanney scale head replica couplers installed.
NMRA RP-25 wheel contour with Code 110 tread width.
Minimum radius: 18? (recommended 22?)
* Lighting functionality is limited on DC models operating on DC track power.
** Improvement over our previously-released HO scale SD60F.
DC Version Features:
DCC ready with 21MTC connector.
Dual sugar-cube speakers (functional after installation of a DCC sound decoder).
Operates on DC track.
Spray Can - Mica Silver (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Scale - 1947 Packard Clipper Two Door Car - Unpainted and Resin Cast Kit
SubTerrain System - 3% Incline/Decline Set
6 sections raise/lower 4 inches in and 12ft run.
Each section measures 2-1/2 inches wide x 24 inches long.
Incline/Decline Sets are the ideal way to alter the elevation of your track quickly and easily. Each set includes the high-density foam pieces necessary to raise or lower the elevation of your track. Incline/Decline Sets come in either 2%, 3%, or 4% grades.
Sets can start an incline at 0 inches and reach a maximum height of 4-1/2 inches. Declines can start at a maximum height of 4-1/2 inches and lower to 0 inches. Actual measurements depend on the grade used.
NOTE: One set only includes foam pieces necessary either to create an incline OR create a decline. One set cannot do both. You will need two sets to create both an incline and a decline on your layout.
To install Incline/Decline Sets, pin in place with foam nails and attach with foam tack glue or the low temp foam glue gun and glue sticks.
HO 50ft Evans DD Plug Boxcar - USLX Tropicana #13063
MODEL FEATURES:
- Double 8ft plug door
- Highly-detailed, injection-molded body
- Separately-applied end ladders, and brake wheel
- Fully-assembled and ready to run out of the box
- Painted and printed for realistic decoration
- Weighted for trouble free operation
- Body-mounted McHenry operating scale knuckle couplers
- Minimum radius: 18 inch
- Machined metal wheels and RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
RS-18u, DCC Ready - New Brunswick East Coast (Patch) #1816
Era:1998-2008
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
Fox Valley Models N Bi-level Auto Rack
Southern
Features:
Die-cast underframe
Finely Molded Details
Etched Metal Panels
Formed Wire
Sharp Painting & Lettering
Multiple Road Numbers
Die-Cast Underframe
Metal Wheelsets
Micro-Trains Trucks & Couplers
HO Scenics Accents - Sermon on the Crate (7pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
Looks like this fire and brimstone sermon is drawing quite a hallelujah from the crowd!
G Scale, Orient Express Figure Set (4pk)
HO Bi-Level Auto Rack - Southern Rack/TTX Flat Car #941972
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO 73Ft Center Partition Car - BNSF (H1) #562773
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
HO 60ft Hi-Cube Plate F Boxcar - BNSF #761082
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline(R) 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Procor 20,000 Gallon General Purpose Tank Car - CN - Company Service / Era: 1985+ - #80370
The Rapido Trains HO scale Procor GP20 Tank Car features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Photo-etched metal walkways
Detailed vent stacks, loading hatches, air tanks and braking equipment
Metal knuckle couplers
Early style features 70-ton trucks with 33in wheels and an exposed drain valve
Late style features 100-ton trucks with 36in wheels and a reinforced drain valve housing
HO Trestle w/Deck Girder Bridge - Kit
DIMESIONS: 15-1/2 x 4 x 4 inches (38.7 x 10 x 10cm)
From the earliest days of railroading bridges like the Walthers Cornerstone Trestle with Deck Girder Bridge have been used to cross low spots, streams and other obstacles. In many cases a trestle was a cheaper, faster option for keeping construction moving. Trestles consist of a series of piers, called bents, which support the track. Wood was the favored building material until the 1940s, and many survive on branches and less busy lines to this day. Where piers could not be erected, such as in a flowing stream, a highway, or across another railroad, a deck girder bridge would be installed as part of the structure. This versatile kit opens lots of detailing options along your right-of-way. Perfect for use in virtually any era, the detailed plastic parts simulate the all-wood construction of the prototypes. The optional deck girder bridge gives you added flexibility, whether installed with existing scenery, or in planning new construction. Complete instructions make construction quick and easy!
This trestles wooden bents can also be modified for use as an approach to smaller girder bridges in the Cornerstone Engineered Bridge System.
- Use as-is or modify the length or height to fit your scenes
- Great for steam or diesel-era layouts
- Easy-to-build plastic kit
- Molded in appropriate colors
Dust Effects & White Spirit Enamel Paint Set -011, 015, 022
35ml X 3 jars per set
HO 100-Ton Open Hopper - BNSF #616657
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
- roping eye with integral end buffers
- end slope sheets are at a steeper angle than the hopper sheets
- 13 riveted side posts with the middle two panels wider than the rest
Other features include:
- wine door locks
- full height side ladder stiles
- roller bearing trucks w/metal 36 inch wheels
- interior & slope sheet braces
- knuckle couplers
HO SD70ACU - DCC & Sound - Norfolk Southern #7281
ETA: October 2023
Detailed Information:
NS FEATURES:
Nathan 5-chime horn
Large plow
Alternating flash ditch lights on both ends (Function in DCC)
In 2016, NS started an ambitious rebuild using ex UP SD9043MACs as cores. The rebuild included upgraded computers and electronic brakes, engine and main generator overall, and new EMD cab. NS designated them as SD70ACUs.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO USRA Single-Sheathed Boxcar: C&O
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Acrylic Colors - Mini Clear Orange - 1/3oz (10mL) Bottle
X26
Tamiya acrylic paints are made from wat6er-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
N Scenic Accent Figures - Painters (12pcs)
A set of men in white painters overalls. Includes scaffolding, two drums of paint and three smaller cans of paint.
HO 40Ft Wood Reefer - UTRX #11633
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch
Trinity 3-Bay Hopper - AMDX #49148
ETA: October 2021
Detailed Information
MODEL FEATURES:
Two body styles represent 10-panel and 12-panel variations
New body styles N including BNSF with stiffeners
Separate brake cylinder, valve and air reservoir with wire brake plumbing
Coupler cutbar and Air hose on each end
Separately applied end cages and etched end platforms
Photo-etched metal roofwalk
Weighted for trouble free operation
Machined metal wheels
Wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Standard size coupler draft gear box with screw mounted lid
Fully assembled and ready for your layout
Replacement parts available
Minimum radius: 18inch
Genesis 100-ton trucks with 36inch machined metal wheels and animated spinning roller bearing caps
PROTOTYPE AND BACKGROUND INFO:
Trinity Steel was founded by C. J. Bender in Dallas in 1933. The company didnt enter into the railroad freight car market until 1984, when Trinity acquired the railcar designs and production facilities of the Pullman-Standard Car Manufacturing Company, once the largest railcar manufacturer in North America. That same year Trinity also acquired the railcar designs of General American Transportation Corporation. In 1986 the rail car designs and production facilities of Greenville Steel Car Company were purchased, including the auto rack designs of Portec-Paragon. Also acquired in 1986 were the railcar designs of North American Car Corporation, and in 1987 Ortner Freight Car was acquired.
With this collective experience across several facilities, Trinity developed many new designs that became ubiquitous to present day railroading. One of their most famous designs is the 3-bay 5161cuft covered hopper. This covered hopper is optimized to transport agricultural products, sugar, dry chemicals, or other similar products and can be seen in unit train assignments all over North America. Introduced around 1995, these cars are extremely common today and owned by many Class 1 and short line railroads alike.
Rail/Truck Transfer Center
Easy to Assemble - Complete instructions
Kit Includes:
Reddish-brown Brick Office Building, Blue Steel Truck Terminal, Gray Concrete Loading Docks (not Shown) Doors, Steps, and Signs
This kit will REQUIRE CUTTING openings for the doors and windows on the loading dock without the pre-measured cut lines usually provided by Pikestuff.
Pikestuff has chosen a plastic which is EASY TO CUT with the use of a sharp hobby knife. (Hobby knife NOT included.)
Location of these openings are completely up to you, so be creative and let your imagination go wild!
Dimensions: 110 x 29 scale feet (15-1/4 x 4 inches)
The Walthers Cornerstone Truck Dump kit is based on authentic facility used for loading all kinds of materials from dump trucks into hoppers or gondolas. This kit includes a timber-supported gravel truck ramp, corrugated-metal dump house and hopper, a positionable hopper loading conveyor that can be arranged left, right or center, and a car puller. Use the Truck Dump to add a shipping facility to any siding on your 1970s and later layout.
The Truck Dump is just one of a wide variety of Cornerstone industrial buildings.
Easy-to-build plastic kit
Gravel truck ramp with timber walls
Metal dump shed and hopper
Looks at home from the 1970s to the present
Perfect for use with gondolas and hoppers
Positionable conveyor and car puller
Molded in two appropriate colors
Conveyor & Shed: 5-3/16 x 1-5/8 x 1-3/32in 13.1 x 4.1 x 2.77cm
Loading Ramp: 7 x 2 x 1-1/8in 17.7 x 5 x 2.8cm
Car Puller: 1/2 x 9/32 x 1/2in 1.2 x 0.7 x 1.2cm
HO VIA HEP2 Coach: VIA Rail - HEP2 Coach Scheme: #4120
VIA Rail HEP2 Coach Scheme (1996 to Present)
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504986
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
HO GP40 - Gold DCC & Sound - Susquehanna #3040
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional feature parts included but not installed (GP-40):
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
Sound Features for Gold Series:
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided
for true realism.
HO Scale Alloy Wheel Set
Truck not included
Pewter cast 22.5inch wheel set of Alloy type wheels
PS-2 2003 2-Bay Covered Hopper - Northern Pacific #75403
MODEL FEATURES:
- Fully assembled and ready-to-run
- Photo-etched roof walks
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Weighted for trouble-free operation
- Window packaging for easy viewing
- Interior plastic blister safely holds the model for convenient storage
- Body mounted McHenry scale knuckle spring couplers
- Machined metal wheels with RP25 contours operate on all popular brands of track
- All 4-packs come with unique road numbers
HO Scale 85 ACF 48-Seat Diner - Union Pacific 302 Overland (Heritage Fleet; Armour Yellow, gray, red)
In response to many requests, Walthers is pleased to announce HO models of the historic Union Pacific train honoring the late President George H. W. Bush, which will include a WalthersMainline SD70ACe 4141, and select WalthersProto cars from the Heritage Fleet. Each car comes fully assembled for operation or display, with a variety of features as noted below. Perfect for fan trips and special events behind 4141 and other UP power
First time with factory-printed UPP numbers and car names
Baggage car includes full-color Presidential Seal decal
Finished in modern-era UP excursion scheme
Factory-installed grab irons
Prototypically accurate window tinting as appropriate
Delivered as a lunch counter cafe and lounge in 1949, car 5015 was later held for special service. Rebuilt as a custom 36-seat diner in 1988 with round tables, it received a new wood interior decor in 2005. Named in honor of the original Overland Flyer, which ran from 1887 to 1890 when it was replaced by the Overland Limited, and UP also advertised itself as as the Overland Route for many years.
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24inch radius is recommended for operation.
HO GP9 DCC Ready - Toronto, Hamilton, & Buffalo #402
ERA: Early 1960-1970s
THB FEATURES:
-Steam Generator Intake & Exhaust
-Long hood nose mounted bell
-Separate ACI plates included
-Roof mounted air tanks
TH&Bs 3 steam generator equipped GP9s began service in 1954 and effectively vanquished steam on this small Canadian railroad. Their time in passenger service was relatively short and they served out their time in freight service all the way into the CP Rail era.
LOCOMOTIVE FEATURES:
-Trainline and MU hoses
-Coupler cut levers
-Drop steps unless noted
-MU stands
-Nub style walkway tread
-Bell placement & type per prototype
-Fine-scale handrails for scale appearance
-Wire grab irons
-Lift rings
-Windshield wipers
-See-through cab windows and full cab interior
-Etched metal radiator intake grilles and fan grilles
-Air tanks mounted below sill unless noted
-Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
-Blomberg-B trucks with appropriate bearing caps
-Sander lines
-Speed recorder unless noted
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately-painted and printed paint schemes
-Body-mounted McHenry operating scale knuckle couplers
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
-All-wheel drive with precision gears for smooth and quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-Bidirectional constant LED lighting so headlight brightness remains constant
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds the model for safe storage
-Replacement parts available
-Minimum radius: 18in
SOUND EQUPPED MODELS ALSO FEATURE
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
HO Thrall High Side Gondola w/Load - LEF&C (3pk) #3
MODEL FEATURES:
- Removable load
- Wire and plastic handrails, stirrup steps, ladders and underbody details
- Factory applied ladders, stirrup steps, and wire grab
- Highly-detailed, injection molded body
- 100-ton trucks with 36 inch wheels with RP25 contours operate on all popular brands of track
- McHenry scale knuckle spring couplers
- Highly-detailed, injection molded body
- Weighted for trouble-free operation
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Thrall was a recognizable freight car manufacturing company in the 1960s to 1980s. Their designs still carry on today. The company focused on building specialized freight cars including high side gondolas, and rotary-dump gondolas for coal. In the 1980s, Thrall acquired five competing railcar manufacturers and became the largest such manufacturer of these cars in the United States.
In the 1960s, coal haulage shifted from open hopper cars to high-sided gondolas. Using a gondola, the railroads are able to haul a larger amount of coal per car since gondolas do not include the equipment needed for unloading. However, since these cars do not have hatches for unloading the products shipped in them, railroads must use rotary car dumpers (mechanisms that hold a car against a short section of track as the car and track are slowly rotated upside down to empty the car) or other means to empty them.
Woodland Scenics Static Grass 12mm 626 Medium Green
Code 110 (.110inch) 33inch Ribbed-Back RP-25 Wheels 1 Pair
Truck Features:
Code 110 (.110) 33h ribbed back wheels
Accurate markings
Incredible detail true to prototype
Non-magnetic metal wheels
Highly flexible sprung trucks
Metal side frames and fully sprung bolster
Smooth tracking free rolling contoured insulated axles
RP-25 free rolling wheels
Mounts with a #2 or 2-56 screw (sold separately).
HO 40ft Low-Cube Container - TLLU (3 Pack) #2
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered with new road numbers
HO 3-Stall Modern Roundhouse - Kit
Product Information
The Walthers Cornerstone 3-Stall Modern Roundhouse will be a hallmark of later steam-era railroading on your HO layout. If you model the diesel era youll also find this kit to be a centerpiece of your servicing facility since some of these classics are still used today for servicing diesels. No matter the weather, workers could easily inspect and service locos under cover. Size was based on the number of engines coming and going in any 24-hour period, with the busiest terminals requiring full-circle roundhouses.
This detailed 3-Stall Modern Roundhouse model includes three stalls on 10-degree centers to make the most of your available space like the prototype. And with a modular design, you can add as many stalls as your railroad requires using the Modern Roundhouse Add-On Stalls (933-2901, sold separately). For more realism, interior and exterior brick wall details, fine windows, floor inspection pits and much more are all standard. Locos up to 125 scale feet long fit easily inside the 3-Stall Modern Roundhouse and parts for a single 145 foot long stall are also included as many modern roundhouses were expanded to handle large locos like Mallets.
Authentic North American prototype
Holds engines up to 125 scale feet long
Includes stall for bigger engines up to 145 scale feet long
Modular design - easily expanded to a full circle
Compact 10-degree stall spacing
Interior and exterior brick detail
Fine window details
Floor inspection pits
Decal signs included
Model a complete engine terminal scene with related Cornerstone HO Scale railroad buildings.
As shown the Modern Roundhouse measures: Standard Building: 17-3/4 x 16 x 5-1/2inch (44.3 x 40 x 13.7cm) With Extended Stall: 20-1/8inch (50.3cm) Long Pit Depth: 5/16inch (.78cm)
HO Pizza & Burgers Food Trailers - Kit
Serve up some fun along your HO layout with these colorful Walthers SceneMaster Food Trailer kits! A great addition to any busy lunchtime scene, you will find trailers like these dishing up any kind of food you can image in business and commercial areas, industrial parks, and festival midways. Include parts for two trailers, with printed signs, awnings and interiors in full color, along with stand-up tables and wastebaskets to detail the scene.
HO 68Ft Bulkhead Flatcar - General American (GAEX) #63081
Features:
Side stake pockets
Simulated tie-loops
Fishbelly center-sill
Prototypical pull-plates and lift rings
HO 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - CSX #242000
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Prototypes in service from late 1980s to the present
- Separately molded and applied hopper gates
- Correct 36 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
Tru Color Paint - Acrylic - Santa Fe Red - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO 40ft ACF Welded Boxcar w/8ft Youngstown Door - Wabash #90207
Create authentic freights for your diesel-era layout with the Walthers Mainline 40ft American Car and Foundry Welded Boxcar with 8ft Door! Introduced in the late 1950s, the wider door opening was popular with shippers and receivers, allowing fast and easy access for forklifts.
Serving into the 1980s, these layout-ready models feature:
-Limited edition - one time run of these road numbers!
-Prototypes in general freight service from late 1950s to 1980s and beyond
-Detailed 10-panel body
-8ft Youngstown doors
-Late Stanray 4/4 improved Dreadnaught ends
-Stanray diagonal panel roof
-Apex see-through steel running boards
-Correct 33in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO Wooden Water Tanks pkg(3) - Plastic Kit
Product Information
Rooftop Wooden Water Tanks are as much a part of a city skyline as clouds! Look at any big city scene and youll see tanks perched on the roofs of all kinds of buildings. From downtown offices, stores and apartments, to grimy industries, this Walthers Cornerstone kit is a detail thats perfect for every tall building on your HO Scale layout. Detailed plastic parts look like real wood and are molded in colors. A separate roof and supports are also included. Each kit comes with parts for three complete wooden water tanks.
Three complete tanks
Easy-to-build plastic kit
Great detail for rooftops on larger buildings
Finished model measures:
4inch (10.1cm) Tall
2-3/8inch (6cm) Wide at Walkway
2inch (5cm) Wide at Base
Filters are designed to achieve a subtle tonal variation for especially vehicles in monotone camouflage colors. Shake and apply directly from the bottle with a moist flat brush. This filter allows us to change subtly the base tone of our vehicles in grey or panzer grey making it more accurate and authentic color. At the same time, the filter adds depth and richness to our vehicle, preparing it for the next paint steps.
Use the filters by moistening a brush and applying it without flooding the surface, to enrich hues in your models, unify camouflage, or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution, or searching for the correct colors for our vehicle.
These filters are enamel based and can be cleaned or diluted with Odorless Enamel Thinner.
HO 4-6-6-4 Steam Challenger - DCC & Sound - Union Pacific #3933
Detailed Information
Union Pacific
In the spring of 1941 UP locomotive designers began working on a locomotive to team up with the new 4-8-8-4 Big Boys then under construction at Alco. The Big Boys were designed to pull heavy freights up the Wasatch Range in Utah to the division point at Green River, WY. What was needed was a locomotive to take over at that point that could speed the freights eastward across the Wyoming Division. Building on their experience with the original CSA 4-6-6-4 Challengers UP and Alcos designers developed a newer and better Challenger type locomotive. The result was a group of 65 4-6-6-4 Challenger built in three separate groups during World War II.
ROAD NUMBER SPECIFIC FEATURES:
#3985
Modern Excursion version
Oil Burner
Era 1980s - 2000s
#3933
Coal Burner
Dual smoke stack
Tender bunker coal extensions
Era 1940s - 1959
#3967
Coal Burner
Dual smoke stack
Smoke Lifters
Era 1940s - 1959
#3997
Coal Burner
Dual smoke stack
Tender bunker coal extensions
Era 1940s - 1959
UP painted several of their Challengers in their two-tone grey paint scheme for passenger service. They also added smoke lifters and converted many to oil burners as well.
ROAD NUMBER SPECIFIC FEATURES:
#3976
Two-tone grey w/ yellow lettering and striping. Oil burner
Dual smoke stack. Era: Late 1940s - Mid-1950s.
STEAM LOCOMOTIVE FEATURES:
Illuminated number boards and headlights
Headlight turns off in reverse
Illuminated directional back-up light in the tender
Correctly operating eccentric cranks
Adjustable top cab vent and cab windows
Pivoting front and rear engines for negotiating 18inch radius curves
Current pick-up on all driver and wheels
Boiler backhead with full details and printed gauges
Synchronized chuff, whistle, bell, blow-down, air compressor, dyno and pop-off valve sounds
User-controlled whistle, short whistle, bell, squeal, coupler crash, injector, water stop and light dimmer
Individually-applied detail parts, including brass-painted bell and whistle, piping, valves, generator, steps, air pump, air tanks, reverser and coupler lift bar
Front coupler pocket can be inserted to mount operating coupler
Minimum recommended radius: 22inch
NEW FEATURES:
Dual cube speakers for great sound quality
Lighted firebox flicker effect with see-through firebox door
Upgraded headlight lighting with brighter LED
Improved loco-to-tender connection harness for increased durability and serviceability
SOUND EQUIPPED MODELS ALSO FEATURE
Tender-mounted DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, whistle, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO TraxSide 2000s Semi Tractor/Trailer Set - Tasket Bakery
(maroon, beige)
This tractor/trailer set features a die cast metal body, interior seats, window glazing and authentic decoration. Its perfect for adding realism to your late-steam, transition and early diesel-era scenes.
HO F7A EMD - DCC & Sound - Bessemer & Lake Erie/Freight #721A
B&LE UNITS FEATURE:
- First time in Genesis for later BLE orange & black scheme
- Back-up lights
- Winterization hatch
- Nathan M3 horn (A-units) / Leslie A-125 horn (B-unit)
- A-Units: Whip antenna, cab vent, nose side grab irons
LOCOMOTIVE FEATURES:
- Full cab interior
- Wire grab irons
- Coupler cut levers
- See-through cab windows
- Flexible rubber trainline hose
- Flexible rubber MU hoses
- Windshield wipers
- Lift rings
- Blomberg-B trucks
- Sander lines
- Directional constant lighting
- Headlight brightness remains constant
- Separately applied photo etched metal and injection molded detail parts
- Detailed fuel tank with fuel fillers, fuel gauges, breather pipes & retention tanks
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Accurately-painted and printed paint schemes
- McHenry scale knuckle couplers - Kadee compatible
- Fully-assembled and ready-to-run
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds model for safe storage
- Replacement parts available
- Minimum radius: 18 inches
- Recommended radius: 22 inches
SOUND EQUPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Individual sound boards installed in both A and B units (sound units only)
- Engine, horn, and bell sounds work in DC
- Some functions are limited in DC
- All functions NMRA compatible in DCC mode
- Excellent low-speed operation
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Lighting effects such as beacons, Gyralight where prototypically accurate
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
RTR 52Ft Mill Gondola, TFM #60735
MODEL FEATURES:
Fully assembled and ready for your layout
New 3-packs make modeling a complete train easy
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
33In solid nickel silver wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18In
PROTOTYPE AND BACKGROUND INFO:
Open top cars, such as gondolas, have been a mainstay on railroads for decades as they are ideal for carrying large, bulky loads such as coil steel or scrap metal loaded by crane.
HO 73Ft Center Partition Car - Union Pacific #275189
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
Tangent Scale Models HO Greenville 86ft Quad Door Boxcar - PC- Delivery X-60-R 2-1970
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Penn Central (PC) -Delivery X-60-R 2-1970- offers another big paint scheme for our customers. A big PC logo dominates the center of these cars, with a stacked Penn Central on the far left. Fans of the Penn Central expect the best from Tangent, and we aim to deliver just that. This 1970-built Greenville group features accurate End-of-Car Cushioning details, Gypsum crossover platforms and truck mounted brake hardware. This X-60-R order rides on 70-Ton Barber S-2 Birdsboro Roller Bearing Trucks, with 33in wheels and accurate rotating Brenco-6 roller bearing caps. These cars were part of the GM Lansing Stamping Plant car pool, with a return-when-empty stencil the GTW in Lansing, Michigan. These beauties are available with eight different road numbers!
HO Industrial Tanks Detail Set - Kit
FEATURES:
- Great detail for industrial complexes, railroad shops and more
- Two large-capacity horizontal storage tanks with concrete supports
- Large and small elevated vertical steel tanks
- Large and small vertical steel tanks without bases
- Easy-to-build plastic kit
- Molded in appropriate base color
HO Master MP-36 - DCC/Sound - Metra #418
Features:
- Golden-white LEDs
- Realistic die-cast underframe
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Realistic lighting effects including ditch lights and in-cab light
- Metal knuckle couplers
- Detailed cab interior
- Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
- Coupler cut levers
- Multiple unit hoses and trainline hoses
- Recommended 22 inch radius with Atlas passenger cars
DCC Ready Units:
- Equipped with a speaker for easy conversion to sound with the addition of a decoder.
DCC ESU LokSound Functionality Features:
- Over 20 sound effects are available including Head-end Power (HEP), engine start-up and shutdown, prime mover sounds through all eight
notches, bell, air horn, air compressor, dynamic brakes and more.
- There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
Bi-Level Auto Racks - Canadian National - White w/Red Logo #9279
All are Ready-to-Run.
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene-
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage.
TTX DTTX 748213 A-E (yellow, large red logo)
100- and 70-ton roller bearing trucks
Correct 38 inch and 33 inch turned metal wheelsets
Heavy die-cast metal frame for superb performance empty or loaded
Finely molded 3-D brake rods with chains, brake piping and weld lines on body
Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
70-ton roller bearing trucks
Correct 33 inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO EMD SD9 - DC/Silent - Chicago & North Western #6603
Chicago & North Western
- Rebuilt at the Oelwein Shops with chopped down nose - a first in HO Scale!
- Modified panels on side sills of locomotive
- Modified/plated over details of dynamic brake blister (Smooth plating over where grilles once were)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Atlas HO Scale EMD GP38, Gold Series- With ESU LokSound DCC, Norfolk Southern First Responders
Atlas Item #: 10002405
MODEL FEATURES:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional features included but not installed (GP-40s only)
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
SOUND & DCC FEATURES FOR GOLD SERIES:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
Prototype Overview:
In 1966 EMD introduced a new line of locomotives based on the 16-cylinder 645-series prime mover. The
40-series included a six-axle and four-axle model, the latter being the GP40. A total of 1,145 units were
produced between 1966 and 1972. These turbocharged 3,000hp locomotives were used primarily in road
freight service. The GP40 was a versatile locomotive that could be found across the US hauling drag freights
over mountain passes and leading high-speed intermodal trains across flat terrain. Three rooftop radiator fans
at the rear of the long hood differentiate a GP40 from its lower horsepower counterpart, the GP38, which has
two fans at this location.
Concurrent with GP40 production, EMD offered a lower horsepower, non-turbocharged locomotive based on the
same 645-series prime mover. The four-axle GP38 was rated at 2,000 hp and had the advantage of costing less
than the GP40. A total of 727 units were produced between 1966 and 1971 when the model was superseded.
The wheelbase of the GP38 was identical to that of the GP40. Both units shared the same EMD road-switcher
style body that was introduced with the GP35 in 1963. A desire for standardization caused the GP38 to share
the same wheelbase, frame and many external components as the GP40. The GP38 was purchased by large and
small roads alike. It was routinely found in local and road freight service throughout the US. Many GP38s and
40s are still in service today, either having been rebuilt or modified. A locomotive that has withstood the test of
time.
Many options exist on the Atlas GP38 and GP40 models. Some of these are: Long hood with or without dynamic
brakes, multiple fuel tanks, high or shoot hoods, and more.
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, White
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
HO Small Shoreline Pier - Laser-Cut Wood Kit
Perfect for all modeling eras, this Small Shoreline Pier kit from SceneMaster brings extra realism to any pond or lake on your HO layout. Designed for easy assembly with separate pilings and a deck laser-cut from real wood, illustrated instructions are included.
50Ft Berwick Box Car - Detroit Toledo and Ironton
#18852
MODEL FEATURES:
Ready-To-Run
Full under body detail with brake rigging
Overhanging X-panel roof
Non-terminating sine wave ends
Separately applied wire grabs
Detailed end ladders and brake gear
Accurate painting and printing
Blackened metal wheels
AccuMate couplers
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23012
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Walthers Goo 1oz 29.lmL Tube
GOO(R) is the all-purpose adhesive that grips almost anything. It never lets go. GOO is perfect for building or repairing jobs on your layout and around the house. The easy contact action of GOO produces fast-setting joints with any material. GOO works with all types of metals including steel, brass, aluminum, copper and more. It also works on plastic, wood cardboard, china, leather, vinyl, ceramics, paper, concrete and many more surfaces. GOO is a permanent rubber base adhesive that s shockproof-its as flexible as rubber. Joints won t crack when flexed back and forth, won t break loose when the temperature changes and won t weaken when wet or damp. It sticks forever! Repair shoes.
For more precise applications of GOO right from the tube, pick up a pack of Micro Tips (#904-302)! Easily added to GOO tubes or most any 3/16 inches diameter glue nozzle, the end can be trimmed for a faster/wider application if needed.
HO Fruit/Food Crates - Large, Grey (4pk)
A variety of food product crates with colorful labels, including: Irish Beauty, Jims Sweet Potatoes, Washington Apples, Jo Jo Melons, Greenspot, American Maid Pears, Red Crown and Big Chief Tomatoes.
HO SD-26 Gold w/ Ditchlights - DCC & Sound - Guilford Rail System (ST) w/ Conspicuity Stripes #643
Atlas Master Series Gold Features:
-ESU LokSound decoder, supporting all DCC programming modes.
-Flexible mapping of function keys F0 to F31.
-Follows all NMRA DCC standards and recommended practices.
-Lighting effects to match the prototype, including Gyralight and Mars light where appropriate.
-Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
PROTOTYPE INFORMATION:
With over 220 units produced by EMD between July 1958 and March 1963, the SD-24 locomotive generated a total of 2,400 hp with its turbocharged 567D-3 prime mover and C-C wheel arrangement. The majority of SD-24s produced were purchased by four roads: Chicago Burlington & Quincy, Santa Fe, Southern, and Union Pacific. Atlas HO scale model features details unique to each road name:
Burlington (CB&Q): High nose, single-chime air horn on short hood, Gyra-light on short hood (non-operating), winterization hatch
Santa Fe: Low nose, 3-chime horn mounted on left side of hood behind cab
Southern: High nose, 5-chime horn mounted on cab, bell detail on short hood
Union Pacific: Low nose, 3-chime horn mounted between 2nd and 3rd radiator fans, winterization hatch
Guilford 615, 643 & MAERSK (ATSF): equipped with ditch lights
HO 40 Steel Side Box Car - Wabash NJI&I (Flour Loading) -Ready to Roll- No.1605
Opaque White Polystyrene V-Groove Siding Sheet (12in x24in) .030inch Groove Spacing
1 Sheet per pack
0.020Inch thick
Groove spacing is center to center of grooves.
Product Information
Used on freight and passenger cars; as well as railroad, commercial and residential buildings. Many 19th- and early 20th-century structures had panels of V-Groove siding applied in horizontal, vertical and diagonal patterns, or in combination with clapboard and novelty siding for decorative effects. These opaque white, sheets are pre-scribed to match different widths of lumber.
N Procor 5820 Covered Hopper - EHSX (Essex Hybrid) #123034
The Rapido Trains N scale Procor 5820 cu ft Covered Hopper features:
Three styles of roof hatches: round, round with ribs and 20 inch vented cover
Two styles of outlet gates: pneumatic and Miner
Etched walkways
Spare hatches included in polybag to let modeler modify for different era
Full end cage details
Accurate paint and lettering
Multiple road numbers available for each scheme
HO 55-Ton Fishbelly Hopper - Delaware & Hudson #5561
Blt.1-40
FEATURES:
- Crisp details
- Sharp painting and printing
- Metal wheels
- Knuckle couplers
Grand Trunk Western Diesel Switchers (1947+)
HO 35Ft Fruehauf Integral-Post Volume Van - PRR: 1950s #35 C 537
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
N Procor 5820 Covered Hopper - UNPX - Procor W/ Union Carbide #122044
The Rapido Trains N scale Procor 5820 cu ft Covered Hopper features:
Three styles of roof hatches: round, round with ribs and 20 inch vented cover
Two styles of outlet gates: pneumatic and Miner
Etched walkways
Spare hatches included in polybag to let modeler modify for different era
Full end cage details
Accurate paint and lettering
Multiple road numbers available for each scheme
HO GE Dash 9-44CW - DCC & Sound - Union Pacific UP #9599
UP FEATURES:
High mounted number boards
K3 horn
Front ditch lights
Standard brass bell
SP body details
After the 1996 acquisition of the Southern Pacific, UP inherited Dash 9-44CW locomotives from the SP. As it was time for major maintenance, they
were eventually repainted into their new owners colors.
ROAD NUMBER SPECIFIC FEATURES:
#9578 Ex-SP 8114, Yellow sill, UP lettering w/o Flag, UP style plow, Sinclair antennas
#9599 Ex-SP 8135, Red sill, Sinclair antennas, SP style plow
#9647 Ex-SP 8173, Yellow sill, Sinclair antennas, small GPS dome, SP style plow
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
RTR 60Ft Gundreson Box Car - AOK #112144
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
HO Interstate Fuel & Oil - Kit
Product Information
The prototypes for bulk oil distributors like the Walthers Cornerstone HO Scale Interstate Fuel and Oil have long been important for every railroad. At home in cities and towns, dealerships like this distribute fuel oil, gasoline and other products locally. This structure kit includes horizontal and vertical storage tanks, above-ground piping, pump house with header stand to unload tank cars, truck loading rack and corrugated metal office. Like the prototypes, the various pieces on Interstate Fuel and Oil can be arranged to fit available space. A gas pump, oil drums and other details are also provided. Interstate Fuel and Oil is one of many Cornerstone HO Scale industry kits.
Realistic corrugated metal textured plastic walls
Arrange to fit available space on your layout
Decal signs
Molded in appropriate colors
The structures in the Interstate Fuel and Oil kit measure:
Loading Rack: 7 x 5-3/4inch (17.7 x 14.6cm)
Office: 5-3/4 x 4-1/2inch (14.6 x 11.4cm)
Pump House: 1-1/2 x 1-1/4inch (3.8 x 3.1cm )
Upright Tanks: 4 x 2inch (10 x 5cm)
HO 53Ft Gunderson Husky-Stack Well Car - Arkansas & Oklahoma AOK (2pkg) #73530, 73649
Does not include containers
Road Numbers Include:
73530
73649
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
HO AutoScenes - Hall & Duke
Mr. Hall is haulin his dog Duke around in his pickup.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
G2 SD70M-2 - DCC Ready - CN #8934
Genisis 2.0 Features:
See-through pilot steps, Lit Marker Lights (CN)
LIT numberboards & ground lights
Detailed Information
CN NOTES:
Part of CNs large fleet of SD70M-2s, these units are equipped with operating marker lights for DPU service. As part of the railroads new heritage program, CN 8952 was painted in the GTW scheme, and CN 8898 received the the special placards celebrating CN independence on the sides of its nose.
ROAD NUMBER SPECIFIC FEATURES:
#8898
White cab roof
CN heritage decals on each side
#8921
Standard CN Web Address paint scheme
#8934
Mismatched compartment doors on left side
#8952
Grand Truck Western Heritage Unit
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Etched see-through steps
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
O Scale FasTrack - The Polar Express, Ice Track (4pcs)
Track illuminates and flickers as the train runs over the track! For added fun, place the icy lake map under the track to re-create the chaotic icy lake scene, as depicted in the The Polar Express motion picture!THE POLAR EXPRESS and all related characters and elements & Warner Bros. Entertainment Inc. (s23)
- 4 pieces of O36 illuminated FasTrack curved track
- Includes a 47 x 23 inch icy lake track map
PRODUCT SPECIFICATIONS
Gauge: O Gauge
Power: Electric
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200074
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
Acrylic Flat Colors - RLM Gray - 3/4oz (23mL) Bottle
XF-22
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
Evergreen Scale Models - Opaque White Polystyrene Angle .125In x 14In (3 pcs pkg)
Plastruct 91883 Red Brick Patterned Plastic Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
7-1/2 x 10
HO AutoFlood III RD Coal Hopper - PGNX #1207
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO SD70ACe - DCC/Sound - Progress Rail #4843
PRLX FEATURES:
- Ex CSX units
- Cab high mount headlight
- Nose door without window
- Rear ladder located conductor side
#4831:
- Inverter cabinet with solid X-panel compartment
#4843:
- Inverter cabinet with X-panel compartment and vertical grille
FEATURES:
- New for the SD70ACe, LED lighting
- Correctly-sized illuminated ditch lights (front only)
- Snowplow
- Front and rear trainline air hose with silver tips
- Multiple unit (MU) hoses with silver tips
- Coupler cut bars
- Train line air hoses
- Flat or tapered front and rear anticlimbers
- Safety tread on the walkways
- Nose or cab mounted headlight
- Standard or isolated cab
- Windshield wipers
- Tinted side windows
- Mirrors
- Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
- Airchime K5LLA horn with square or tube style mounting bracket
- GPS Domes or PTC antennas per prototype
- Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
- See-through radiator fans
- Etched dynamic brake grille and screen with appropriate grid detail underneath
- Dynamic brake louver variations per prototype
- Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
- Early or late hand brake housing and wheel
- Early or Late Sander Brackets
- Factory installed wire grab irons
- Jacking pads per prototype
- Plumbing alongside the frame appropriate to the specific railroad and purchase order
- Fuel tanks with single or dual fuel fillers
- HTCR or HTSC trucks per prototype
- Non-sound QuickPlug equipped with NEM 21-pin DCC plug
- McHenry scale knuckle spring couplers
- Minimum radius: 18in
- Recommended radius: 22in
SOUND EQUIPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
HO FCA 52ft 100-Ton Bulkhead Flatcar - DWC #200095
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2013 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
HO 60ft Hi-Cube Plate F Boxcar - TFM #20038
Transportacion Ferroviaria de Mexico (Boxcar Red, TFM Logo)
Bring your freight car fleet up to date in minutes with the Walthers Mainline(R) 60ft Hi-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft Hi-Cube Plate F Boxcar include:
-Limited edition - one time run of these roadnumbers
-Prototypes now in service with TTX and several railroads
-Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
-Prototypically correct roof with both X and diagonal panels
-Separately applied latch bars
-Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
-100-ton roller bearing trucks
-36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
N Scale 52Ft Mill Gondola - Wisconsin Central #54001
Detailed Information
MODEL FEATURES:
Body-mounted McHenry knuckle couplers installed
Fully assembled and ready for your layout
Screw mounted trucks for accurate tracking
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO 45Ft Trailmobile Dry-Van Trailer - CN SuperTherm #715084
The Canadian Piggyback Trailer features:
Landing gear has two separate pieces to create in-motion or parked positions
Separately-applied mud flaps
Highly detailed wheel and axle area
26Ft trailers have two styles of front stabilizing bars to create in-motion or parked positions
Three individual numbers per scheme
Rapido Trains Inc. is proud to offer not one, but two styles of Canadian piggyback trailers! A first for the industry!
The two trailers are the 26Ft Can-Car Industries Dry-Vans with and without side doors, and the 45Ft Trailmobile design trailers, also with and without side doors. The 26Ft trailers were widely used by Canadian National and Canadian Pacific for package delivery services, as well as trucking services and retail store owners. These unique trailers have the iconic ribbed sides with catchy graphics. Eventually they were phased out of service in the 1980s.
The 45Ft Trailmobile trailers arrived in Canada in the mid-1970s, almost a full decade before they launched in the US. These venerable trailers also had the option for side doors, for easier access. Much like the 26Ft trailers, CN and CP both had good quantities as well as small and large trucking services. Many wore a variety of colourful schemes, so crank up that memory machine and grab a few of these neat trailers today!
HO Forklifts, Wheelbarrows, Handtrucks, etc. (Kit)
HO EMD GP9 Phase 2 w/High Hood - Standard DC - Chessie/C&O #6193
FEATURES:
- Standard high short hood
- Based on as-built units produced from 1955 to 1957 (Phase II)
- Limited edition - one time run of these roadnumbers!
- Scale width hood with correct contours
- With or without dynamic brakes as appropriate
- Front and rear footboards or front plow and flat rear pilot as appropriate
- See-through steps
- Same powerful drive as WalthersProto(R) locos featuring:
- Five-pole skew-wound motor
- 14 to 1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Machined brass flywheel
- Heavy die-cast metal chassis
- Constant and directional warm white
- Correct size RP-25 metal wheels
- LED headlights
- DCC-ready with 21-pin (mtc) DCC plug
- Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately)
HO Alberta Grain Freight - 4-Bay Cylindrical Hopper - Decals
Description: Alberta Freight - Hopper - Cylindrical - 4-Bay - Grain - Waterslide Decal - HO Scale
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) #653109
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO Scale 40Ft Down-Line Regulator Assembly Kit
The natural poles in this kit come already painted depicting weather-stained, pressure treated wood. The other parts are cast in metal -just like the prototype- and ready to be painted. The kit comes with everything that you see in the picture, including the wires needed to make this look like the real thing Duro Brand CA glue recommended. The transformers in this kit feature our large sized transformers.
A word about our Power Pole Kits: A 30 Ft. HO Scaled pole would be 4.1 inches in height. A 40 Ft. pole would be 5.5 inches. These poles are sharpened on the base and are slightly taller than these dimensions to allow for pole insertion into your scenery.
HO Laser-Cut Minis - Playground Equipment - Kit
A roundabout, seesaw, and swing belong on a playground so that children can really let off steam in the fresh air! At a playground, children can enjoy some time in nature with their friends and really switch off. They can run riot at the playground with the children next door until the early evening hours before its time to go home. Bring this idyllic, everyday scene to your model landscape and decorate it with even more lovingly designed details!
Roundabout: 2.2 x 2.2 cm, 1.1 cm high
Seesaw: 4.2 x 6 cm, 1.5 cm high
Swing: 2.1 x 0.2 cm, 2.3 cm high
Includes 11 horns
The Rapido Trains Diesel Horn Variety Pack includes: K3L, K3LR, M3H, M3HR (3 Versions), M5, 2 Leslie Single Chimes, K5LA and a Hancock Air Whistle.
HO ET44 Tier 4 - DCC Equipped - Kansas City Southern #5011
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO SD70 - DCC & Sound - Norfolk Southern #2563
NS FEATURES:
Acquired by NS after 1998-1999 split of Conrail
Antennas and conduits on cab and long hood
Nathan K5LAR24 horn
Cab vent
Air Conditioner
Small front plow
-Dual- fuel sight glasses
Late fuel tank
Spare knuckle brackets on rear pilot
This group of former Conrail SD70s joined the NS fleet in 1998 because of the split up of Conrail between NS and CSX. Early repaints featured diagonal dashes along the frame.
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140037
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Evergreen Scale Models 9020 - .020in Plain Opaque White Polystyrene Sheet (3 Sheets)
6in x 12in SHEET
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
HO EMD GP35 - Paragon4 Sound/DC/DCC - CB&Q #989
(Chinese Red)
Ubiquitous on American railroads, the EMD GP35 is a 4-axle diesel-electric locomotive built by EMD and subsequently General Motors Diesel in the mid 1960s. Over 1300 of these locomotives were produced, and they were operated by virtually every major railroad in the United States. Additionally 26 units were built for Canadian railroads and another 57 units were built for Mexican railroads. These freight locomotives were powered by EMD 567D3A 16-cylinder engines that generated 2500 horsepower.
List of individually controllable lights in our EMD GP35 models:
- Headlight
- Rear Light
- Mars Light (SP only)
- Numberboard Lights (Front & Rear)
- Front Classification Lights
- Rear Classification Lights
- Emergency Light (SP only)
- Rotary Beacon (where appropriate)
- Ditch Lights (where appropriate)
- Cab Light
Road-specific detail options that are prototypically accurate for each road name:
- Truck sideframes
- Dynamic brake hatch
- Open & closed type fans
- Short hood detail arrangement
- Long hood end detail arrangement
- High short hood option where accurate
- Horn type and location
- Bell location
- Multiple front pilot types
- Multiple rear pilot types
- Accurate cut lever types
- MU receptacle arrangement
- Multiple sunshade options
- Antenna type and location
- Wind deflector type
- Rooftop AC for ATSF type
- Rotary beacon type and location
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up
- ABS Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, Wipers, and Etched Metal Grills
- Prototypical Light Operation - accurate for each paint scheme
- Prototypically Accurate Sounds for the EMD GP35 Diesel Locomotive
- Metal Kadee-compatible Couplers (2)
- Will Operate on Code 70, Code 83, and Code 100 Rail
- Minimum Operating Radius: 18 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
HO Delivery G43A 2-1968 Gondola - Penn Central #576062
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inchh Wheels
PC -Delivery G43A 2-1968- in the original Penn Central green paint scheme, and a PC version we have not yet offered! These gorgeous models have 2 placards in place for the PC reporting marks, road numbers, and ACI label on the left side of the car. On the right side is an additional placard that includes a PC logo and Penn Central lettering. These placards are utilized on this class of PC car since these cars have side corrugations on each panel, where they knew that putting paint on the corrugations would not last very long! These cars have corrugated ends, and the Tangent replica includes oxide red car interiors ? on the interior walls and ends ? like the prototype. We even duplicated the slight green overspray on the inside end corners! The 100-Ton trucks feature accurate rotating -Timken- caps.
Straight Track Assortment
12 pieces in all.
Includes 2 each of 6 short pieces: 3/4 in, 1 in, 1 1/4 in, 1 1/2 in, 2 in and 2 1/2 in.
HO Magor 54Ft Flat Car - USAX - Delivery (Era:1953+) #38267
The Rapido Trains HO scale DODX Magor Flatcar features:
FIRST TIME IN PLASTIC!
Drawn from original blueprints, measurements and 3D scans
Fully-detailed underframe including piping and equipment
Correct Buckeye 3-axle trucks with incredible detail
Trucks have friction bearings or retrofitted roller bearings as appropriate
Metal knuckle couplers
Simulated wood deck design
Loads coming soon
HO 40ft 16K Gallon Tank Car - Minnesota Corn Processors/DMIX #190001
Update your HO tank car fleets with the Walthers Proto 16,000-Gallon Funnel-Flow Tank Cars! In use since the 1960s and still going strong today, the prototypes carry corn syrup and other liquids while the v-shaped body speeds unloading using gravity. Perfect for serving producing and consuming industries, each railroad-ready model features:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes in service from the 1960s to the present day
- Used for corn syrup used in making candy, soda and other food products
- Etched metal walkways and platforms
- Factory-installed grab irons
- Train pipe and brake rigging underbody details
- Road-specific placement of manways and safety valves
- Ultra-smooth rolling 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 30Ft Single-Track Railroad Through Girder Bridge - Kit
Product Information
This Walthers Cornerstone 30Ft Single-Track Railroad Through Girder Bridge kit is based on one of the most common North American railroad bridge designs. Its part of the Cornerstone Engineered Bridge System and is designed to be compatible with system abutments and bridge piers. Plate-girder bridges are typically used to cross short distances between 30 and 90Ft 9.1 to 30.4m. Used for many decades, this design is constructed of several steel sections riveted together to form girders. They are known as through types as the track passes between, rather than on top of the spans. Its ideal for use with WalthersTrack Code 83 Bridge Track 948-83004 or other trackage of your choice. The kit can be built either as a single- or a double-track bridge. Each includes parts for two complete spans, but the design makes it easy to combine additional kits (sold separately) to build a longer or wider bridge if needed. The plastic parts are molded in color and feature authentic rivets and other fine details.
As shown the 30Ft Single-Track Railroad Through Girder Bridge is 4-7/32 x 2-3/8 x 1inch (10.7 x 6 x 2.5cm long).
Part of the Cornerstone Engineered Bridge System
One of the most common American railroad bridge designs
Used for extra clearance above highways, waterways and other railroads
Fits steam, diesel and modern eras
Girder heights vary with bridge length
Build with open or ballasted deck
Includes optional center girder for easy conversion to double track or wider right-of-way
Perfect as approach spans for bigger Cornerstone and other bridge kits
Easily added to new or existing scenery
Authentic rivets and other details
Molded in dark gray plastic
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23053
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Dash 8-40CM - DCC & Sound - Canadian National: Large Noodle #2415
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
Conrail #4117
EMD SD80MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Models equipped with marker lights will be illuminated
Rubber MU hoses for durability
All New Tooling
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
See through steps
Illuminated ground lights
Front and Rear Illuminated Numberboards
Presenting EMDs 5,000HP 6-axle diesel in a whole new level of authenticity. Starting in 1995, EMD revived the 20 cylinder engine design, last seen in the SD45, and introduced the 5,000 HP SD80MAC. Athearn is pleased to announce this locomotive in Genesis 2.0.
CR FEATURES:
Illuminated front and rear red marker lights
Illuminated Ditchlights alternately flash per prototype w/ effect on DCC+Sound version
Four–panel dynamic intake per CR prototype
LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE:
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 53ft Railgon Gondola - Railgon/GONX #310450
(as-built; black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft railgon gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
FEATURES:
- One time run of these road-numbers, order now - limited quantity available
- Based on Railgon 310000 series cars
- Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
- Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO ALCo RS-3 - DCC Ready - CN (Black) #3039
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- road name specific details
- road name specific fuel tanks
- can motor
- flywheels
- nickel silver wheels with RP25 flanges
- knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound Select decoder
HO Enterprise 2-Bay Covered Hopper - MSGX (Flo-Sweet) #118
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
HO 40Ft Wood Reefer - BREX #75111
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch
HO USRA Single-Sheathed Boxcar: C&O
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Union X-3 Tankcar - Procor Limited #32172
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO GP9u Mother & Slug - DC/DCC/Sound - StL&H: #1625 & #1010
- First ever accurate model in plastic - often imitated, never exact!
- Long service lives, 1980s+, all throughout Canada and the US
- Powered slug with traction motor sounds and flashing beacons
GP9u Locomotive:
- Heavy diecast frame with super detailed piping and traction cables
- Detailed Blomberg trucks (Later series have rotating bearing caps)
- Traction motor details on gearbox
- Working track lights, class lights, control stand lights
- Metal side handrails
- Working ditch lights on prototypically appropriate road numbers
- Front and rear plows, plates or footboards on appropriate road numbers
Slug:
- Heavy diecast frame
- Metal handrails
- Removed exhaust stacks
- Full lighting and flashing beacons
- Both models will have: DC/Silent
(21-pin DCC Ready) or DCC/ESU
LokSound
In 1970, CP embarked on a progam to rebuild its aging fleet of GP9 road switchers. The locomotives had their front noses chopped along with many other appearance details change. The later rebuilds would receive upgraded 645 power assemblies. The rebuild program lasted until 1990 and ushered in the plain CP Rail red scheme.
Starting in 1993, CP converted various end-cab switchers to daughter units, or slugs, by decommissioning or
removing the prime mover (replacing it with ballast to return the unit to its operating weight) and drawing power for the traction motors from GP9u mother units using cables that were semi-permanently connected between the units.
All of the mother units were drawn from the 1500/1600 series of GP9u units.
HO Pressureaide Covered Hopper - ACFX (Orange Sill Venturi) #59914
(white, blue, orange, Venturi)
12inch Long Brass Angle - 0.014inch Thick x 3/16 inch Leg Length
Brass Angle (1 pc)
Leg Length: 3/16 inch
HO Pivoting Turnout Linkage
Description:
For controlling turnouts from underneath the layout by choke rod or switch machine.
- Virtually impossible to see from above
- Works with any type switch machine
- Can be used with choke rod
- Comes with mounting screws and piano wire
Tru Color Paint - Acrylic - Black - 2oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO GMD SD40-2 - DCC & Sound - St. Lawrence & Hudson #5636
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - DM&E #29016
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Prototypes in service from late 1980s to the present
- Separately molded and applied hopper gates
- Correct 36 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
N Scale EMD SD70ACe - Paragon4 Sound/DC/DCC - UP (Powered By Our People) #1111
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up (except for rubber traction tire)
- ABS Plastic Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, and Cut Levers
- Prototypical Light Operation with Separately Controllable Headlight, Rear Light, Cab Light, and Front Ditch Lights
- Prototypically Accurate Sounds for an EMD SD70ACe Locomotive
- Microtrains-compatible Couplers (2)
- Will Operate on Code 55, Code 70, and Code 80 Rail
- Minimum Operating Radius: 9.75 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #903984
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO PC&F 5241 CUFT - Boxcar - Pan Am - (B&M) - Single Car #3217
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Scale Thrall 53Ft Articulated Well Car Set - TTX #728674 (3pkg)
Features:
Each car consists of three wells--A,B & C.
Walkway variants specific to prototype
Etched metal detailing
Detailed air reservoirs
Detailed brake valves
Sharp hand grabs and stirrups
Runs on 18inch radius
Recommended for 22inch radius
Floor pin holes for Atlas and other brands of containers
Product Information
When the domestic intermodal container market settled out in the late 90s, the 53Ft long container emerged the winner. Car builders responded with new wells of like size to accommodate the new standard. Introduced in series service in early 2000, Thralls triple 53Ft articulated well car was certainly the best looking of the 53Ft wells. Angular wheel cutouts, 3 flared-bottom wide and 8 narrow side posts give this intermodal age well car character.
HO Gunderson 6276 50Ft Plate F Boxcar - BKTY #156853
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
Bob Smith Industries 141 Foam Cure, 30ml
HO BiLevel Commuter Car - GO Transit (Late Scheme) Set #1
Toronto
Includes: Cab: 254 Coaches: 2619, 2653 (Series 4)
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO Trinity 3-Bay Hopper - KRIX #56043
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - PTTX #92338
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Evergreen Scale Models - OD White Polystyrene Rod .04In x 14In (10 pcs pkg)
HO Dash 8-40CM - DCC Ready - BCR: Faded Red/White/Blue #4604 - OVR Exclusive
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
HO Railbox RBOX & ABOX Boxcars - 1975-1984 - Waterslide Decals
Circa: 1975-1984
Equipment Type: Boxcar
Description: Boxcar - RBOX & ABOX-Circa 1975-1984 IPD Boxcars, ACF, Berwick, FMC, Pullman Standard, Pacific Car & Foundry, etc - Waterslide Decal - HO Scale
HO 40Ft Wood Reefer - UTRX #11626
Detailed Information
MODEL FEATURES:
All models are representative of prototypical paint schemes
Separately applied brake wheel
Bettendorf 50-ton trucks
Body-mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 18inch
GP38-2 EMD - DCC/Sound - EJ&E #700
Detailed Information
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; were excited to include new features often requested, to the GP38-2 and upcoming Genesis models.
EJE FEATURES:
Phase I with narrow spaced radiator fans and chicken wire radiator grilles
Standard range dynamic brake
Xenon strobe, effect with DCC+Sound version
Firecracker antennas
-Mushroom- vent on cab roof
Long hood mounted 3-chime air horn on bracket
Underframe mounted bell
Detailed 2600 gallon fuel tank with vertical sight glass
Blomberg-B trucks with leaf springs and Hyatt bearings
All-weather windows on both sides of cab
Post-delivery -in-service- appearance with handrail verticals and step edges painted safety yellow.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
road number as listed - photo may show a different one
HO USRA Single-Sheathed Boxcar: Reading
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Curved Track - 22.5-degree Radius - 24in (610mm)(4/pkg)
With Katos HO Scale Unitrack Modular Roadbed Track System, you can have an operating layout in minutes!
Whether you are a beginner or expert, Unitrack offers hours of enjoyment and trouble-free operation.
Suitable for all types of layouts, temporary or permanent, this modular track system features an integrally molded roadbed for realistic appearance.
Uni-Joiners (included) lock the track sections together for easy assembly and solid electrical connections.
Medium Weight Plastic-Compatible Motor Oil (1/2oz)
Labelle Industries 107 Plastic Compatible Motor Oil 2019 formula is a medium-weight lubricant for HO and larger scale models with high-torque motors. With its temperature range of -45F to +450F its more than suitable for model trains!
HO B-50-15 Boxcar - Rebuilt w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #15235
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
HO Hawker-Siddeley Van - Caboose - DEVCO Railway #9104
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
HO End-of-Track Bumper - Unpainted Metal (1)
HO Kalmar Intermodal Container Crane - Kit
FEATURES:
- Great detail for large or small modern intermodal terminals
- Handles trailer and container loading or unloading
- Positionable lifting equipment
- Add-on spreader bar for container loading
- Colorful decals
- Molded in three colors and clear plastic
HO 1.5 Amp Mobile Decoder with 21MTC Interface
FEATURES:
Mobile Decoder
21MTC interface with Configurable Logic Level or 12v F3-4 function outputs
1.5 Amp/2 Amps Peak
6 FX3 Functions, 0.5 Amp
Series 6 Decoder Features
Works with PX112-2 Power Xtender
.824inchx.64inchx.17inch
20.92mm x 16.26mm x 4.32mm
Features:
FX3 Function outputs for prototypical lighting effects and on/off control:
Constant Brightness Lighting with directional or independent control.
Realistic Effects like Ditch lights, Mars lights, strobes, and many more
FX3 & Standard Function Qualifiers operate functions based on direction, F0 on or off, direction and F0, and whether loco is moving.
Function Remapping for custom function setup.
Master Light Switch turns off all lights & functions with one keystroke.
Advanced Consist Function Controls
Digitrax LocoMotion System-Your locomotives look like the real thing.
The Digitrax LocoMotion System makes them run like the real thing, too!
Torque Compensation for smooth as silk silent operation.
128 Speed Step operation (14 or 28 steps can also be used).
Momentum with acceleration and deceleration.
Normal Direction of Travel is user selectable.
Switching Speed feature for easier and faster access to yard speeds.
3 Step Speed Tables set start, mid and max voltage for custom control.
28 Step Speed Tables with 256 level resolution for precise control.
Configurable Logic Level or 12v F3-4 function outputs.
Program CVs using any Digitrax Compatible Control system without having
to buy any extra equipment.
Compatible with Locomotives using the 21MTC Interface
Series 6 Decoder Features.
Works with PX112-2 Power Xtender.
Configurable FX3
Pulse Function available on all function outputs.
2 Digit and 4 Digit Addressing.
Basic, Advanced & UniVersal Consisting.
SuperSonic motor drive for silent operation.
Direct mode programming.
Transponder Equipped ready for transponding on your Layout.
Motor Isolation Protection helps prevent damage to your decoder.
DCC Compatible.
FCC Part 15, Class B RFI compliant.
HO HH600/660 - DCC & Sound - RAILCO #770
Features:
Early Blunt truck with separate brake cylinders, molded coil spring detail (optional) and metal truck chains
Separately-applied metal grab irons and lift rings
Separately-applied fine scale handrails and stanchions, coupler cut lever and piping
Directional lighting with golden-white LEDs
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
NMRA 8-pin plug for DCC
Sound Features for Gold Series:
[DCC Operation]
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes -on the fly- are provided for true realism.
HO 60ft PS Flatcar - Burlington Northern #630844
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
N Scale Long Barrel Ore Hopper - CN Mineral Brown #346629
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
Scenic Glue
Formulated especially for model landscaping. Dries clear with a matte (flat) finish, is flexible and leaves no residue. Use to attach various foliage, bushes, underbrush and lichen. Does not become brittle after drying.
N Scale 3-Stall Modern Roundhouse - Kit
Product Information
The Walthers Cornerstone 3-Stall Modern Roundhouse will be a hallmark of later steam-era railroading on your layout. If you model the diesel era you will also find this kit to be a centerpiece of your servicing facility since some of these classics are still used today. No matter the weather, workers could easily inspect and service locos under cover. Size was based on the number of engines coming and going in any 24-hour period, with the busiest terminals requiring full-circle roundhouses.
This detailed 3-Stall Modern Roundhouse model includes three stalls on 10-degree centers to make the most of your available space like the prototype. And with a modular design, you can add as many stalls as your railroad requires using the Modern Roundhouse Add-On Stalls (933-3261, sold separately). For more realism, interior and exterior brick wall details, fine windows, floor inspection pits and much more are all standard. To make adding realistic trim to your roundhouse, wall cap tiles and pilaster caps are molded in a realistic contrasting color. Locos up to 125 scale feet long fit easily inside the 3-Stall Modern Roundhouse.
Authentic North American prototype
Holds engines up to 125 scale feet long
Modular design - easily expanded to a full circle
Compact 10-degree stall spacing
Interior and exterior brick detail
Fine window details
Floor inspection pits
Decal signs included
HO 1/87 New Look Bus (Deluxe) - Chicago CTA - Late Scheme #9188
The Rapido Trains HO scale New Look Bus models features:
-Correct tubular profile traced from a 3D-scan of a real New Look Bus.
-Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
-Optional left-side emergency exit door and either single- or dual-stream rear doors
-Full interior including separate bench seats and grooved flooring.
-Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
-Steerable front wheels and REAL rubber tires.
-Three types of bumpers − steel, water and rubber.
-A wide variety of optional detail parts included.
-Separate advertisement frames included with each model.
-Pre-installed route destination signs for added realism.
-Working interior lights, headlights and tail lights.
-Installed as appropriate
A 9-12 volt DC power supply (not included) is required to power the lighting features.
HO RTR ACF 4650 3-Bay Hopper - Norfolk Southern #251105
Date: 8-92
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
HO Marine Industries Piggyback Flatcar - Canadian Pacific (6 pkg) #2
Includes Road Numbers:
505659, 505663, 505668, 505704, 505732, 505785
The Canadian Piggyback Flatcar features:
Drawn from original blueprints
Artworks sourced from original design drawings
Heavy die-cast center sill
Photo-etched deck surface
Two styles of hitches; upright and collapsed. Either is install-able by the modeler
Wire grab irons
Durable trucks with metal wheels
Rapido semi-scale metal knuckle couplers installed from the factory
Both of Canadas two major railways started piggyback (TOFC) services in the 1950s. By the late 60s early 70s this traffic had grown substantially and both railroads saw a need to purchase purpose-built flatcars that could handle both 26-foot and longer trailers, up to the then-new standard of 45-foot.
Canadian National placed a order for 283 cars with Vancouver Iron and Engineering Works (V.I.E.W.). Delivery on these cars started in 1966. They would continue in service well into the late 1980s, after a major rebuild in 1976 to a single hitch configuration which resulted in the cars being renumbered into the 688000?688184 series.
Canadian Pacific ordered a large batch of 305 cars from Marine Industries Limited (MIL) in 1972, which were delivered as road numbers 505625-505930. These cars would soldier on in service after several rebuilding programs. As well as the removal of second hitch, container pedestals were later added to many of the cars. A final group of cars were reconfigured for the Southern Ontario XpressWay service with rub-rails for the circus-style loading and unloading at terminals.
HO RTR SD40T-2 - DCC Ready - Southern Pacific (SP 1990s) #8299
SP 1990s Era ROAD NUMBER #8299 FEATURES:
Plated/removed nose gyralight
short nose
relocated Nathan P-3 Horn
tall forward ditchlights
Stratolight beacon
faded paint
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Separately applied air tanks
See through cab windows
Welded ECAFB
Photoetch windshield wipers
LED Lighting
HTC truck sideframes
All-wheel electrical pickup
See-through dynamic brake fans
-Mushroom- nose vent on right side
Separately applied wire grab irons
Fully assembled and ready-to-run
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox speific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body
Painted and printed for realistic decoration
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for troublefree operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Replacement parts available including motor brushes
Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
Patches applied and shaped per road number matching each corresponding side to the prototype
Duplicated look and feel of -In Service- equipment; -Tattered and Torn- just like the real thing
Some Prime for Grime models feature paint scheme variations
Diesel Lift Rings (Formed Wire) - For ALCO S & RS Series Diesels - pkg(12)
Budd Baggage-Dorm Original Scheme - VIA Rail #607
Each Baggage-Dorm includes:
Realistic stainless steel finish
Track-powered interior lighting compatible with DC and DCC layouts
Full underbody detail including separate air, steam and electrical lines
Separate metal grab irons, stirrups and end gates
Accurate D22 brake equipment and piping
Super-detailed 41-NDO-11 trucks with end frames
Full, multi-color interior detail
3D CP beaver shields on CPR models - not just a printed picture!
Sprung diaphragms
Metal Macdonald-Cartier knuckle couplers
HO SD60 - DCC Ready - SOO Line #6049
MODEL FEATURES:
Locomotives come with railroad-specific details including: Operating beacon (in DCC/Sound version), horn, winterized hatch, antenna, handrails, etc.
SPECIFICATIONS:
DCC: Ready/21-Pin NEM
PROTOTYPE MANUFACTURER: EMD
Axles: 6
LIGHTED: LED Lighting
PROTOTYPE AND BACKGROUND INFO:
In 1984, Electro-Motive (EMD) introduced the 60 series locomotive. These had many improvements over the earlier models including features such as: New and improved EMD 710 power plant producing 3600 HP, wheel slip control, computerized cabinet replacing the older and unreliable components.
This design spawned into many other upgrades within its class like the modernized wide cab, Isolated cab, and even the start of AC traction technology.
These locomotives were suited for just about any mainline service that could be thrown at them. The model was fairly popular with class one railroads, with Norfolk Southern purchasing the most at 151 units. Most of them are still in service today. Norfolk Southern in 2010 started a large full rebuild program of their SD60s (including purchasing cores from other sources) into SD60Es, which rebuilt them from the frame up with new electrical components and a newly designed cab to improve visibility and forward crash impact safety.
1/8 inch OD Round Brass Tube (Soft Fuel Line) 0.014inch Thick x 12inch Long (2 pkg)
Round Brass Tube 0.014inch Wall thickness x 12inch Long Soft Fuel Line (2 pcs)
Outside Diameter: 1/8 inch
1952 Ford/Cab Over Engine/Refrigerated Truck - Unpainted and Resin Cast Kit
10Ft 6In Modified 1937 AAR Boxcar - Toledo, Peoria & Western #7077
HO EMD SW9 - DC/ Silent - Illinois Central (IC Black Scheme) #481
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Illinois Central:
Delivered in 1951
Road style end rails with drop steps
Short side handrails
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO Alco RS3-M Chop Nose - DCC & Sound - Delaware & Hudson: Lightening Stripe #508
Photo courtesy Mike Herman Family
Delivery Expected Early 2024
Details:
RS-3 units #4115, #4106, #4107, #4113, #4122, #4112, #4119, and #4128 were rebuilt by Morrison Knudsen into RS-3m units (numbered #501-508, respectively) between December of 1975 and March of 1976. The locomotives were re-engined with the 2,000 horsepower ALCo 12-cylinder 251C engine, and the long hood was raised six inches to accommodate the larger engine. The dynamic brakes were also moved to a box behind the cab.
HO Procor 3000CuFt Aluminum Hopper w/Handrails - UNPX/ Procor Wordmark #127241
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
N Scale Pre-Fabricated Warehouse (Scale: 30 x 80ft) - Blue
Product Information
This kit is designed with cut lines on the back side of the walls so that you can choose the height of the building. Walls are 24 scale feet high with cut lines to produce a 20,16,12, and 10 foot tall building. Side walls and End walls have door and window openings provided. Solid walls have cut lines for door and window openings (optional). Kit includes doors, windows and down spouts.
HO Delivery G43A 2-1968 Gondola - Penn Central #576027
Product: PRR / PC Shops G43 Class Gondola
Scale: HO Scale 1:87.1
Truck: All-New precision Tangent Scale Models 100-ton Barber S-2 Granite City foundry trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36inchh Wheels
PC -Delivery G43A 2-1968- in the original Penn Central green paint scheme, and a PC version we have not yet offered! These gorgeous models have 2 placards in place for the PC reporting marks, road numbers, and ACI label on the left side of the car. On the right side is an additional placard that includes a PC logo and Penn Central lettering. These placards are utilized on this class of PC car since these cars have side corrugations on each panel, where they knew that putting paint on the corrugations would not last very long! These cars have corrugated ends, and the Tangent replica includes oxide red car interiors ? on the interior walls and ends ? like the prototype. We even duplicated the slight green overspray on the inside end corners! The 100-Ton trucks feature accurate rotating -Timken- caps.
HO Scale 1980-1985 Chevrolet Impala Sedan - Assembled - Metro Police (White)
The Rapido Chevrolet Caprice and Impala cars feature:
Both Wagon or Sedan carbodies
1980s body style designed from photos and drawings
Multiple front grille designs covering the entire 1980s
Real rubber tires (and white walls too, where appropriate)
Multiple rim designs (wire spoke, dog dish and more)
Realistic chrome finish on bumpers, rims and more!
HO EMD SD9 - DC/Silent - Burlington Northern #6232
Burlington Northern
- Former CBQ units (Phase IV, first time for a plastic model!)
- Correct 5-step, BN walkway
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
N Scenic Accent Figures - Assorted Skids (15pcs)
More than 10 wooden skids are included in this set. Some are piled three high, others are singles. There are some concrete blocks and other pieces of junk piled on top.
Craft Plywood Sheet - 12 x 24inch x 3/8inch Thick - Single Piece
Perfect for painting, staining, stenciling and wood burning
Cuts easily with a saw and is suitable for both indoor and outdoor (must be sealed) use
3/8inch (.97cm) Thick x 12 x 24inch (30.4 x 60.9cm)
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov
HO SD70M - DCC & Sound - Ontario Northland/ONT Flared #2121
Detailed Information
ONT FEATURES:
Ex-NS
EMD deck mounted front and rear ditch lights
PTC antenna array
Late 4-panel radiator body
Late sloped EMD cab nose
Small EMD front plow
Late EMD trucks with exposed bearings
The Ontario Northland Railway is operated by the Ontario Northland Transportation Commission, part of the government of Ontario, Canada. During late 2022, ONT purchased a small batch of ex-NS flared SD70Ms. As of recently, only 2 have been repainted so far. We are offering both as new additions to your model railroad!
SD70 SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit signal lights and/or beacons, if equipped
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Speed recorder unless noted
EMD HTCR trucks, early with hidden bearings, or late with exposed bearings per prototype
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Procor 20,000 Gallon General Purpose Tank Car - Sunoco - UTLX / Era: 1974+ - #46439
The Rapido Trains HO scale Procor GP20 Tank Car features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Photo-etched metal walkways
Detailed vent stacks, loading hatches, air tanks and braking equipment
Metal knuckle couplers
Early style features 70-ton trucks with 33in wheels and an exposed drain valve
Late style features 100-ton trucks with 36in wheels and a reinforced drain valve housing
1:87 CAT 12M3 Motor Grader
Details:
1:87, Wheel Loader
Dimensions:
4 x 1½ x 1⅝ in
103 x 37 x 42 mm
Acrylic Flat Colors - Light Blue - 3/4oz (23mL) Bottle
XF-23
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO F89-F Bi-Level Auto Rack - New York Central/BTTX #913213
Detailed Information
MODEL FEATURES:
Die-cast underframe
Authentic undulating safety railing
Accurate Whitehead and Kales Auto Rack
Early or late train lines and cut levers per prototype and era
Customer installed end bridge plates (included in box where applicable)
Detailed deck
Wire-formed brake plumbing
Separately applied hand brake per prototype
Separately applied wire grab irons where applicable
Prototypical ride height
70-Ton roller bearing trucks with animated rotating bearing caps installed
Trucks with animated rotating bearing caps
Minimum radius: 22inch - Recommended radius: 24+inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
HO EMD FT A+B Set - DC/DCC/Sound - Milwaukee (1948 Repaints) #37A + 37B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
Bowser 25220 - HO ALCo RS-3 Phase 3 - Standard DC - Norfolk & Western #2554
Ready To Run with Locomotive specific details:
air hoses
windshield wipers
grab irons
coupler lift bars
operating headlight
window glass
fuel tank
can motor
flywheels
blackened wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC.
DCC/Sound version features LokSound V5 decoder.
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
ESU LokSound 5 DCC sound decoder installed in model.
Accurate V16 645F3B prime mover, horn, bell & additional sounds by ESU LokSound.
Dual sugar-cube speakers.
Operates on DCC track. DC operation is NOT recommended.
N ACF 4650 cu ft 3 Bay Hopper - Montana Rail Link #50036
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
HO EMD SD7 - DCC & Sound - EMD Demonstrator #991
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO FGE 57Ft Mechanical Reefer - DCC & Sound - BNSF #795010
Detailed Information
57Ft MECHANICAL REEFER FEATURES:
Available with onboard SoundTraxx sound
Scaled from prototype manufacturers drawings and field measurements
Repaints often vary by road number in the size and style of the reporting marks, car numbers and patch shapes
See-through protective screens on the genset end
Detroit Diesel 2-71 Genset visible inside
End wall corrugation visible inside
Inner refrigerator bulkhead
See through end platforms
Two different exhaust stack types: straight pipe with -flapper- or T-shaped -smokejack- per prototype and era
Full underframe detail including Keystone cushioning, air brake reservoir, control valve, brake cylinder, brake plumbing, and fuel tank
Factory applied end ladders and door closure rods
Trainline hoses with silver ends
Three different coupler cut lever styles per prototype
Body-mounted or truck-mounted brakes per prototype
McHenry operating scale knuckle couplers
100-ton roller bearing trucks with rotating bearing caps
Fully-assembled and ready-to-run
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Machined metal wheels with RP25 contours
Weighted for trouble-free operation
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Sound recorded from actual genset
Sound randomly cycles on and off
Utilizes minimum track power
Raise and lower the volume by adjusting the potentiometer
HO Modern Concrete Crossing w/Rerailer Ends - Kit
Product Information
Keep your HO trains on track and rolling with the WalthersTrack Modern Grade Crossing kits with Rerailer Ends. Easy to assemble and install along any straight stretch of track, features include:
Blends easily with yards, main lines or branch lines
Two styles for steam-, diesel- & modern-eras
Low profile works with most Code 83 and Code 100 track (sold separately)
Installs easily with no need to cut or replace existing track
Parts for two complete crossings - build as 2 single or one double track installation
Each measures: 10-5/8inch/ 26.9cm w/rerailer ends; width 3-1/4inch/ 8.2cm single track, 5-3/16inch/ 13.1cm double-track
Realistic surface texture with bolts or modern fastener details
Molded cut lines on underside for easy customizing
Great accessory with Cornerstone Street System brick, asphalt or concrete paving, each sold separately
N Scale Unassembled Couplers for TM or BM on TOFCs (2pair)
Acrylic Flat Colors - Nato Green - 3/4oz (23mL) Bottle
XF-67
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO RTR 68Ft Railgon Gondola - CSXT #491015
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
Structure - Brick Mission-Style Santa Fe Depot - Kit
The finished Brick Mission-Style Santa Fe Depot measures:
11-5/16 x 6-7/16 x 3-3/4in
(28.7 x 16.3 x 9.5cm)
The Walthers Cornerstone HO Scale Brick Mission-Style Santa Fe Depot is based on a standard Santa Fe design used across the railroad. This style of brick train station was typically used for larger towns that were a county seat. Depending on the location a matching brick freight station was often built as an add-on to the depot or nearby as a freestanding structure. While the depot was a Santa Fe design similarly styled stations were used on several railroads. This easy-to-build kit includes the realistic brick structure, window glazing featuring unique detailing in the operators bay, wood trim, downspouts, a brick platform and realistic printed signs. Many of these structures still stand and many have been repurposed for other uses, so the Brick Mission-Style Santa Fe Depot will look great on any layout set between the 1930s and the present.
Santa Fes standard county seat depot used system wide
Use alone or combine with Brick Freight Station (933-4056, sold separately)
Great station for smaller cities and towns
Detailed brickwork, separate windows and doors
Brick platform
Easy-to-build plastic kit
Molded in three colors and clear glazing
Realistic printed signs
HO GP40-2 - DCC Ready - DT&I #422
Detailed Information
DTI FEATURES:
Last DT&I scheme
Nose-mounted bell
Xenon beacon (effect in DCC)
M3 horn
Extra nose grab irons
Front plow
Firecracker antenna
Non-dynamic brake hatch
Extra jacking pads
Llit class lights and number boards (effect in DCC)
DT&Is last locomotive order was for GP40-2s #422-425 in late 1979. Painted in their new bright -star- logo, they were built for high-speed TOFC service. Notable DT&I options included: Xenon beacon, nose mounted bell, and non-dynamic brake hatch. GP40-2 #407 was part of the original order from 1972. After being repaired from a wreck in 1979, it was repainted into the new -star- scheme and put back into service.
ROAD NUMBER SPECIFIC FEATURES:
#407
Repainted after wreck
chickenwire grilles
small EMD plow
orange bell
small front anticlimber
#422
Last DT&I locomotive order; corrugated grilles
newly tooled xenon beacon with bracket
large EMD plow
silver bell
large front anticlimber
#424
Last DT&I locomotive order; corrugated grilles
newly tooled xenon beacon with bracket
large EMD plow
silver bell
large front anticlimber
GP40-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO RTR 65Ft 6inch Mill Gondola - MKT #43717
MODEL FEATURES:
Working drop ends. Gently lift up & push inward to fold ends down.
Separately applied wire grab irons
Interior detailing
Decorated models fully-assembled and ready to run out of the box
Machined metal wheels and RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Minimum radius: 18inch
Archer-Daniels-Midland ADM UELX #30223 (yellow, blue; Molecule Logo)
Expand grain traffic on your HO railroad with a fleet of these WalthersProto(R) hoppers! Based on the widely used 55 Ft Evans 4780 cars introduced in 1977 for grain service and still in use today, features of the models include: Limited edition - one time run of these road numbers!
Favorites for hauling grain & dried distillers grain (DDG)
Factory-installed grab irons
See-through etched-metal walkways and end platforms
Correct side braces and separate vibrator brackets on hopper bays
Superb paint & lettering
Ultra-smooth rolling metal axles and 36 inch wheelsets
Proto MAX(TM) metal knuckle couplers
HO PC&F 5241 CUFT - Boxcar - EEC Patch 1 - Single Car #3077
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
All Scale Learning Kit - Scenery Details
Learn simple techniques for creating detail on any layout. There is enough material included in this kit to detail a 2 x 2 feet surface.
Value-packed tools specifically developed to teach beginning modelers and other hobbyists how to use the Terrain and Landscape Systems. Learn to sculpt terrain, cast, color and install rocks, landscape various scenes, create paved areas, make trees, model water features and other scenic details. Reseal packages for easy storage.
HO Scale Thrall 53Ft Articulated Well Car Set - TTX (Forward Thinking Small) #728475 (3pkg)
Features:
Each car consists of three wells--A,B & C.
Walkway variants specific to prototype
Etched metal detailing
Detailed air reservoirs
Detailed brake valves
Sharp hand grabs and stirrups
Runs on 18inch radius
Recommended for 22inch radius
Floor pin holes for Atlas and other brands of containers
Product Information
When the domestic intermodal container market settled out in the late 90s, the 53Ft long container emerged the winner. Car builders responded with new wells of like size to accommodate the new standard. Introduced in series service in early 2000, Thralls triple 53Ft articulated well car was certainly the best looking of the 53Ft wells. Angular wheel cutouts, 3 flared-bottom wide and 8 narrow side posts give this intermodal age well car character.
HO 40Ft Hi-Cube Dry Containers - CMA CGM (3pk)
3 pack road numbers include : CMAU 530686/554986/555571
Body: Type A
Door: Type A
Latch: Type A
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
HO - 89ft Thrall Bi-Level Auto Carrier - Ready To Run - Norfolk Southern
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this WalthersProto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6inch (27.2m) flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
Factory-installed grab irons
Separately-applied ladders and brake equipment
Ultra-smooth rolling metal axles with 33inch wheelsets
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As WalthersProto Auto Racks are the correct prototype length, a minimum 24inch radius is recommended for operation.
HO Porcelain Advertising Set #1
Blair Line HO Scale Business and Storefront signs are printed in appropriate colors on thin plastic for easy assembly or placement with plastic cement or CA glue. Colorful signs are based on real signs and many include two identical signs for back-to-back, two-sided mounting. Steam and diesel-era signs make great roadside, street-side, trackside and structure details.
Soundtraxx 810163 JST-N18 Adapter
This adapter is designed to make installing a TSU-N18 decoder a breeze! It will work with the current size TSU-N18 decoders and the new smaller boards as well. The adapter is two sided: One side has a 7-pin wire harness and a NEXT18 socket to plug in a TSU-N18 decoder. The back side has soldering pads for speakers, CurrentKeeper, and lights.
Dimensions: 16 x 9.5 x 5mm
Function Outputs: 6
Max Function Current: 100mA (ea. Output)
HO Scenic Accents - People & Pets (8)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
This set includes a mailman, a man, and a woman in various canine situations, four dogs, and a fire hydrant. The mailman fends off a small dog, the woman walks her small dog, and the man tries to get his dog to heel, although puppy has other plans! The last dog looks fondly at a fire hydrant.
Kadee 1688 1-72 Stainless Steel Screws - 1-72 x 3/8 inches long - pkg(12)
Roundhead
HO 60ft Hi-Cube Plate F Boxcar - TTX/TOBX #889069
Product Information
Bring your freight car fleet up to date in minutes with the WalthersMainline(R) 60ft High-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft High-Cube Plate F Boxcar include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes now in service with TTX and several railroads
Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
Prototypically correct roof with both -X- and diagonal panels
Separately applied latch bars
Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
100-ton roller bearing trucks
36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Bathtub Coal Gondola - MLMX/ Sims Metal #336
Built: 10-08
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
Evergreen Scale Models 2037 .037in Opaque White Polystyrene HO Scale Freight Car Siding (1 Sheet Pack)
.020in (.5mm)THICK X .037in( .95mm) GROOVE SPACING.
GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
REPLICATES 3.25in GROOVE SPACING IN HO SCALE
AVAILABLE IN 6in X 12in AND 12in X 24in SHEET SIZES
HO 60ft Bulkhead Flatcar - CP Rail #316399
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
G2 SD70M-2 - DCC Ready - CN-25/Heritage #8898
Genisis 2.0 Features:
See-through pilot steps, Lit Marker Lights (CN)
LIT numberboards & ground lights
Detailed Information
CN NOTES:
Part of CNs large fleet of SD70M-2s, these units are equipped with operating marker lights for DPU service. As part of the railroads new heritage program, CN 8952 was painted in the GTW scheme, and CN 8898 received the the special placards celebrating CN independence on the sides of its nose.
ROAD NUMBER SPECIFIC FEATURES:
#8898
White cab roof
CN heritage decals on each side
#8921
Standard CN Web Address paint scheme
#8934
Mismatched compartment doors on left side
#8952
Grand Truck Western Heritage Unit
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Flexible rubber MU hoses
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Etched see-through steps
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance-including lit number boards, ground lights, and marker lights (if applicable)
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Tru Color Paint - Acrylic - Chicago & North Western Zito Yellow - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO FMC 5077 SSD Boxcar - Railbox #17867
MASTER MODEL FEATURES:
- Single or Double Sliding Door where appropriate
- Multiple body styles
- Metal knuckle couplers
- Plate B Box Car
- X-Panel Roof
HO USRA Single-Sheathed Boxcar: CNJ
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO G2 SD80MAC - DCC & Sound - CSX/YN2 #801
CSX FEATURES:
Former CR units
Operating forward and reverse red marker lights
Correct horn and antennas per road number
Approved by CSX experts
Just as a batch of SD80MACs were sent to NS after the CR split, CSX acquired a batch as well. After a short period of running around patched, they were all repainted into CSXs -YN3- scheme. Only one, CSX 801 (which was renumbered to 4591), received the -YN2- scheme. It eventually got the YN3 treatment.
ROAD NUMBER SPECIFIC FEATURES:
#801
Fresh YN2 repaint with CR details.
#4591
YN2 paint with patched numbers
K5 horn
white painted roof with GPS dome.
#4590
YN3 repaint
-Spirit of Benning-
Leslie 3-chime horn
white painted roof with GPS dome.
#4600
YN3 repaint
K-5 horn
white painted roof with GPS dome.
SD80MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately painted and printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
CV chart included in the box
HO PC&F 5241 CUFT - Boxcar - BKTY (UP) - Single Car #153391
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Brass Chain - 12 Inches - 27 Links Per Inch
A-Line Chain is great for detailing all kinds of models in all scales. Available in a variety of sizes measured as links per inch, chain is also available in multiple kinds of metals.
HO Scenic Accents - Carpenter Crew - Scenic Accents(R)
HO 60ft Flat Car - Southern Pacific (3pk)
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO RTR 53Ft Platewall RoadRailer Trailer - Conrail/ Norfolk Southern (Triple Crown) #463246
(white, Medium Logo, NS-CR Logos)
RoadRailer Platewall Trailer
Coupler Mate not included with Roadrailer kit. Only one needed per train
Tru Color Paint - Aerosol Spray Paint Can - Gloss Rust- 4.5oz (135mL)
Tru-Color Aerosol Spray Paint is ideal for painting any model when you dont have an airbrush. This solvent-based acrylic paint is great for weathering and wide-are coverage. Available in railroad and weathering colors, Tru-Color spray paint comes in spray cans as well as in liquid colors designed for brush or airbrushing.
HO EMD F7A - DCC Ready - Wabash #631
Detailed Information
WAB FEATURES:
F7 Phase I
No dynamic brakes
Dual single-note air horns (A-units)
Passenger pilot
Cooling coils on roof
Wabash units 1158-1189 were delivered in 1951-52. In the 1960s, they were renumbered into the 600-726 series. Wabash 1189 has been preserved and is currently operational at a railroad museum in Illinois.
ROAD NUMBER SPECIFIC FEATURES:
#625
Nose MU connection
cut skirts
#631
Nose MU connection
cut skirts
#1169-A
Full Skirt
#1189
Full Skirt
F-UNIT SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Windshield wipers
Lift rings
Wire grab irons
Sanding lines
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Directional constant lighting
Headlight brightness remains constant
Separately-applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes & retention tanks
Speed recorder unless noted
See-through cab windows and full cab interior
Etched metal fan grilles
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO AutoFlood III RD Coal Hopper - GATX (GGPX) #1776
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO Railroad Roman - Letters & Numbers (Black) 22inch-24inch - Waterslide Decals
PSC Transfer Van - Canadian National #76516
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
HO H21A 4-Bay Hopper - Painted, Unlettered Car
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Atlas - N Scale GP-9 TT - Gold DCC Sound - Grand Trunk #4930
Features:
Powered low friction drive
Blackened metal wheels
Dual brass flywheels
Directional lighting
Golden-white LEDs
AccuMate couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
AccuMate couplers are made under license from AccuRail, Inc
HO 40Ft Refrigerated Container - ONE Set #2 (3 pkg)
Road Numbers: SZLU 9555316, SZLU 9563862, SZLU 9548908
(White/Pink)
MASTER MODEL FEATURES:
40-foot High-Cube Refrigerated Container
Composite materials sandwich-sides design
Detailed picture window refrigeration unit with separate parts
ISO Type 45R1
Five hinge / four bar doors with OUT style handles
Each set comes as a 3-pack
HO Sinclair Antennas (2pcs)
HO Portec 3000 Covered Hopper - Midwest Railcar (MCEX) - #330241
Features:
- Ready to run
- Injection molded plastic
- Fine scale detail with many separately applied parts
- 2 Body and roofwalk variations to accurately match the prototype
- 2 styles of vibrator brackets
- Highly detailed end cages and brake gear
- 100 Ton Trucks
- Metal Couplers
- Etched metal roofwalks and end platforms
- Crisp painting and printing
HO Scale Coupler Box Covers - For Athearn Rolling Stock pkg(12
HO FMC 5503 Double Door Boxcar - St. Maries River Road #52053
Features:
Double Sliding Doors
Wire grabs
Etched parts
Plate C Box Car
X-Panel Roof
59 Ft Cylindrical Hopper - Ready to Run - Logimex NDYX #816903
(gray, black, blue and white logo)
Product Information
Moving grain and a variety of other bulk loads, these colorful WalthersMainline models of the popular 59Ft Cylindrical Hopper make it easy to model a complete unit train! Introduced in 1972 to handle grain and potash, the cars are based on prototypes built by National Steel Car with a capacity of 4550 cubic feet of cargo. Theyve worn a wide range of colorful paint and lettering schemes over the years, 59Ft Cylindrical Hoppers can still be found all across North America today.
Nicely detailed, fully assembled and affordably priced to make it easy to expand your fleet, WalthersMainline 59Ft Cylindrical Hoppers feature:
-Limited Edition - one time run of these roadnumbers!
-Model of a National Steel Car 4550 cubic foot car
-Fully assembled, ready to run
-Thousands used in North American grain and potash service from 1972 to the present
-Trough or round loading hatches as appropriate
-Four different car numbers for each roadname
-See-through running boards
-Detailed brake gear, roof hatches and end ladders
-Correct 36Inch turned-metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO EMD GP40 - DCC Ready - Western Pacific (Zephyr) #3511
1994+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
4mm Static Grass - Pasture Grass (20g)
The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments.
Plaster Cloth - Narrow Roll (1 roll/pkg - 4 in x 5 yd, 5 ft2)
Narrow Roll - Specially sized for small areas/projects, Risers, Inclines/Declines and Road Riser. Packaged in resealable bag.
Plaster Cloth is the easy, convenient method for modeling lightweight land contours and terrain base. The plaster-coated cloth creates a durable hard shell, designed to accept Earth Colors Liquid Pigment, paints, plaster castings and landscape materials easily, with realistic results. Use to fill seams or gaps around rocks, tunnels, and terrain to blend terrain features.
HO GE 44 Tonner Phase III Body - DC/DCC/Sound - Undecorated
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
SubTerrain System - 3% Incline Starter Set
6/pkg - each piece elevates from 0 - 3/4 inch within 24 inches and measures 2-1/2 inches wide x 24 inches long
Incline Starters are wedges of high-density foam used to start your track on an incline or decline. Each piece in a package elevates/lowers the track to/from a designated number of inches within a 24 inch stretch, allowing for a smooth transition from one height to another.
To install, pin in place with foam nails and attach with foam tack glue or the low temp foam glue gun and glue sticks. Use alone or with risers.
HO SP 3/4 Dome-Lounge w/Flat Sides - Southern Pacific (General Service) #3602
-Overland Style
Rapidos SP Dome Lounge Cars Features:
Designed from original blueprints and field measurements of existing cars
Two fully-detailed interior configurations
Multi-colour interior decoration
Two underbody arrangements
Accurate interior and exterior paint and decoration
Full flicker-free track-powered interior lighting
Lighting (prototypically) in the dome roof
Accurate free-rolling trucks
Metal magnetic knuckle couplers
HO 60ft PS Auto Box - Norfolk & Western/NW #600415
MODEL FEATURES:
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Fully detailed full cushion underframe
- Full underframe detail: air brake reservoir, control valve,
- Separately applied door closure rods, side ladders, metal grab irons and brake cylinder with plumbing and brake rod details
- etched metal end platforms
- 100-Ton roller bearing trucks with operating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Machined metal wheels
- Weighted for trouble free operation
- Multiple road numbers
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
During the 1960s, Ford Motor Company, Pullman Standard and Santa Fe pooled their resources to develop a standard boxcar to meet the transportation needs of automobile manufacturers in the United States. Delivered in 1965, the Pullman Standard auto parts boxcar is the most prolific example of this type of freight car. It ultimately changed the face of automobile manufacturing and rail transportation.
PRIMED FOR GRIME MODELS FEATURE:
- Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Some Prime for Grime models feature paint scheme variations.
HO Turkey & Peacock (2ea)
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Cotton Belt St. Louis South Western
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Sheriff and Drunk - 2 Unpainted Figures
60ft Pullman-Standard Flatcar - Ready to Run -- Alaska Railroad
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
N Old Homestead - Built & Ready Landmark Structures - Assembled
Product Information
Shes a bit rough around the edges and the prefect representation of an old rural bungalow, beautifully weathered and loaded with detail. Features include an outhouse, rusting propane tank, a couple of old barrels, a mailbox, old Bowser asleep on the front porch and more.
Measures: 2-1/32 x 2-29/32inch 5.2 x 7.4cm
G2 Dash 9-44CW - DCC Ready - Southern Pacific #8151
ETA: Late October 2022
Detailed Information
SP FEATURES:
1994 as-built appearance
Early (-dog leg-) stepwell gussets
Sinclair antennas
Nathan P3 horn
Large SP plow
SP NOTES:
The SP 8100s were some of the last mainline power delivered to the SP proper. The engines were used on all types of trains, in multiple with other class members of other SP 6-axle power. Many of them survive to this day, albeit repainted into Union Pacific colors.
DASH 9 SERIES LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately -painted and -printed paint schemes
Coupler cut levers
Flexible rubber MU hoses for durability
Flexible rubber trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights above front trucks
Illuminated front and rear walkway lights
N Scenic Accent Figures - Track Workers (6/pkg)
HO Union X-3 Tankcar - Seaboard Air Line #073159
Detail Variations:
Equipped with AB brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO FMC 5077 SSD Boxcar - Vermont Railway #3501
MASTER MODEL FEATURES:
- Single or Double Sliding Door where appropriate
- Multiple body styles
- Metal knuckle couplers
- Plate B Box Car
- X-Panel Roof
Plastruct 90082 ABS TEE 1/16 (8pcs pkg)
HO 70 Ton 9 Panel Open Hopper - Alaska #14734
FEATURES:
True scale dimensions with accurate details
Weighted, detailed underframes
Equipped with AccuMate Knuckle Couplers
Trucks equipped with free-rolling metal wheels
Accurate painting and lettering
Removable coal load
Bi-Level Auto Racks - BNSF New Image - Orange Rack on TTGX Flat Car #TTGX 965521
Spray Can - Metallic Silver (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 1:87 Diecast Masters 85688 Caterpillar 395 Hydraulic Excavator w/2-work tools - Next Generation GP Version
Tangent Scale Models HO Greenville 86ft Quad Plug Door Boxcar- SP -B-70-54 Delivery 2-1970
Product: Greenville 86′ Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Southern Pacific: This B-70-54 group covers SPs first order of quad door cars that were part of the GM Stamping Pool out of Cleveland, Ohio on the B&O. The scheme, of course, is simply one of the coolest paint jobs ever applied to a Greenville 86ft boxcar. Hold this car in your hand to appreciate the nuanced differences between white stenciling and SP Lettering Gray stenciling. From the huge dark gray arrows pointing to the centered SP logo, to the smallest black door handle detail, it?s all there. The SP cars feature their as-built 1970 appearance that includes Apex crossover platforms, a Universal hand brake housing (with separate long handle!) and a Universal brake wheel. SP ordered their cars with Center-Of-Car cushioning, and we have duplicated this setup, with a complete COCC underframe and draft gear. 70-Ton Trucks with 33in wheels and rotating Timken roller bearing caps finish off this replica. These SP replicas are Ready-To-Operate in eight numbers!
HO USRA Single-Sheathed Boxcar: C&NW
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
Building the Right-Sized Layout - Softcover Book
Softcover Book by Thomas Klimoski
112 Pages
Have an extra spare room in your house? Downsizing your layout? Building The Right-Sized Layout is the perfect book to help with planning a room-sized layout for your home. This new book features 5 track plans covering details on how to create a manageable layout with space, time, and resources in mind.
Youll find:
Track planning strategies
Construction techniques
Room-planning concepts
Tips on operating once your layout is built
And more!
Featuring author Thomas Klimoskis Georgia Northeastern Railroad, as well as 3 other examples of small layouts, this planning book is a must-have for model railroaders.
DH126P - 1.5 Amp Economy Decoder with Digitrax Easy Connect 9 Pin to DCC Medium Plug - 3.0 inch harness
Specifications:
Size: 0.672 x 1.074 x 0.259 inches (17.08mm x 27.28mm x 6.6mm)
Installation: DCC Medium Plug Long Harness
Function Outputs: 2
Function Type: FX3
Features: Series 6
For Use With: PX112-2
Current Rating-Functions: 0.5 Amps total all functions
Current Rating: 1.5/2.0 Amps Max
Warranty: No Worries Warranty
FX3 Function outputs for prototypical lighting effects and on/off control:
- Constant Brightness Lighting with directional or independent control.
- Realistic Effects like Ditch lights, Mars lights, strobes, and many more.
- FX3 & Standard Function Qualifiers operate functions based on direction.
- F0 on or off, direction and F0, and whether loco is moving.
- FX3 effects optimized for selectable LED or lamp operation.
- Configurable FX3 Pulse Function available on all function outputs.
- Function Remapping for custom function setup.
- Master Light Switch turns off all lights & functions with one keystroke.
- Advanced Consist Function Controls.
Digitrax LocoMotion System-Your locomotives look like the real thing.
- The Digitrax LocoMotion System makes them run like the real thing, too!
- Torque Compensation for smooth as silk silent operation.
- 128 Speed Step operation (14 or 28 steps can also be used).
- Momentum with acceleration and deceleration.
- Normal Direction of Travel is user selectable.
- Switching Speed feature for easier and faster access to yard speeds.
- 3 Step Speed Tables set start, mid and max voltage for custom control.
- 28 Step Speed Tables with 256 level resolution for precise control.
- Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.
- Series 6 Decoder Features.
- 2 Digit and 4 Digit Addressing.
- Basic, Advanced & Universal Consisting.
- SuperSonic motor drive for silent operation.
- Direct mode programming.
- Decoder Reset CV with or without speed table reset.
- Transponder Equipped ready for transponding on your Layout.
- Motor Isolation Protection helps prevent damage to your decoder.
- DCC Compatible.
- FCC Part 15, Class B RFI compliant.
HO Trinity 3230 Covered Hopper - General American (GACX) #62763
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
Testors - Spray Enamel - Gloss Bright Blue (3oz)
Testors 3 oz Aerosols come in over 50 popular colors and 9 different finishes. They offer superior adhesion to a variety of surfaces including wood, metal, glass, terra cotta, ceramic bisque and more. They are fast drying and easy-to-apply which means quick project completion.
HO Greenville 86Ft Double Plug Door Box Car - Norfolk & Western (Delivery 1-1978) #861427
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Norfolk & Western (NW) -Delivery 1978- replicates another major player in the world of Greenville 86Ft Boxcars. The NW rostered several Greenville series, but the 1978 order was the biggest. In fact, this 1978 B-138 class of 317 cars was the biggest Greenville order of any railroad. The bold NW graphics are almost understated on a boxcar of this size, but this paint scheme is one example that literally defines modern auto parts trains. The NW cars feature the correct late-Greenville body with 5 grab irons on each side along with body mounted brake gear. Those gorgeous 100-Ton -Low Profile- Barber S-2-C trucks show off the accurate rotating Timken bearing caps. SKUs -01 through -06 have January 1978 data and SLUs -07 through -12 have February 1978 data.
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x10) .011In x .112In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 1 X 10 LUMBER SIZE IN HO SCALE
9/32 inch Open Web Truss - Warren Style (2pcs)
Excellent for towers and booms. Also good for roof trusses, bridges, conveyors, and space frames. Tee flange on one edge only allows easy registered assembly for triangular and square sections as pictured at left. Protruding side of flange may be removed if desired. Precision Injection Molded in Dark Gray ABS Plastic.
Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
9/32 in
HEIGHT IN MM
7.1mm
WIDTH IN INCHES
31/64 in
WIDTH IN MM
12.3mm
THICKNESS IN INCHES
7/64 in
THICKNESSS IN MM
2.8mm
LENGTH IN INCHES
5 in
LENGTH IN MM
125mm
HO 60ft Flat Car - OTTX/Red Logo (3pk)
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
HO RTR PS-2 2600 Covered Hopper - Northern Pacific/1977 #76002
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
N Scale EMD SD70ACe - Paragon4 Sound/DC/DCC - UP (Missouri Pacific Heritage Livery) #1982
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up (except for rubber traction tire)
- ABS Plastic Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, and Cut Levers
- Prototypical Light Operation with Separately Controllable Headlight, Rear Light, Cab Light, and Front Ditch Lights
- Prototypically Accurate Sounds for an EMD SD70ACe Locomotive
- Microtrains-compatible Couplers (2)
- Will Operate on Code 55, Code 70, and Code 80 Rail
- Minimum Operating Radius: 9.75 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
N Scale AutoFlood III RD Coal Hopper - CEFX #600428
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
Cleaning & Finishing Pads Replacement (8 White, 8 Brown) for HO Scale, N Scale, O Scale Tracks
1/16 inch OD Square Brass Tube 0.014inch Thick x 12inch Long (2 pkg)
Square Brass Tube 0.014inch Wall thickness x 12inch Long
Outside Diameter: 1/16 inch
CP #6258
Expected in February 2021
LOCOMOTIVE FEATURES:
Brand new model
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
EMD SD60M WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Rubber MU hoses for durability
All New Tooling
New HTC trucks feature animated spinning roller bearing caps
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
CP FEATURES:
Illuminated front and rear number boards
Illuminated front and rear added ditchlights
Split dynamic brake acess door
Winterization hatch
Large window nose door – high or low window position based on prototype
Large sand fill hatches on the nose
Standard nose bevel
SOO style rear knuckle brackets
HO EMD FT Booster - DC/DCC/Sound - AT&SF (Freight Scheme) Unnumbered
Santa Fes FTs were equipped with couplers at both ends of each unit. This allowed the Santa Fe to run
FTs in A+B+B (or even A+B+B+B!) sets. Our individual coupler-equipped FT B-units allow modelers
to easily recreate these lash ups for the first time!
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
Formed-Metal Handrail Stanchions Extra Long 1 inches - 2.54cm pkg(35)
Amtrak Phase 3 (late) - set #4
Consist numbers- 156, 157, 179, 180, 181
Turboliner features:
Accurately designed using original blueprints and field measurements
Tinted windows, full interior details and flicker-free interior lighting
Separate factory installed grab irons
Full underbody details and highly-detailed trucks, including third-rail shoes
Both Power Cars come with smooth, reliable drive systems for optimal performance
Working headlights, marker lights and cab-mounted strobe lights
DCC models feature accurate sounds sourced and remastered from original videos
HO Trenton Works 6348 CN Boxcar - Canadian National (Website) (3pkg)
3-Pack includes the following numbers, all individually packaged: #598035, 598121, 598140
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
Gravel - Buff Coarse
Gravel is sized to model gravel roads more realistically. Use Accent for shoulders and to model bare spots on roads.
Gravel- 10.8 in3
Accent Powder- 1.8 in3
Coverage: Models a gravel road 14 feet x 2 inches
Code 83 Crossing - Nickel Silver w/Brown Ties - 90 Degrees
Plus 4 pcs 5cm 2 inches straight track
DCC Friendly
HO MLW M420 A/B Set - DC/DCC Ready - British Columbia (Two-Tone Stripe) #644, 683
-NOTE:
Preliminary artwork. Subject to change or revisions before production.
The M420 was equipped with the ALCO 12V-251c3 prime mover producing 2000 H.P. Most M420 units rode on MLW ZWT (Zero Weight- Transfer) trucks. The only exception to this were the 5 units built for the Providence & Worcester, which rode on ALCO trade-in FA trucks. The P&W required a different bolster design and different truck spacing, making them unique.
MLW constructed 103 M420s between May 1973 and February 1977 for four railways including CN (80), BCR (16 including eight B units), Ferrocarriles del Estado (2), Providence & Worcester (5).
CN would take delivery of the M420s in 3 groups: MR-20a class 2500-2529 (delivered 1973), MR-20b class 2530- 2559
(delivered 1974), and MR-20c class 2560-2579 (delivered 1976).
All of the CN units were retired by 1998 and today many of these locomotives have found second careers on short lines all over North America.
The M420 Locomotive features:
3D scanned from an actual M420. This is as close to real as
it gets!
MR-20b and MR-20c classes available in the first run
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables
and other piping, rerailer and a silly number of separately applied parts
Two or three panel radiators, louvered or large opening
electrical cabinet door, open or closed truck bearings
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights, and
illuminated cab control stand
Highly detailed cab interior with optional open front door
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
NEW FEATURES!
CN 3500s feature rebuilt long hood with knuckle buster door
latches, paper air filters, retention tank ditch lights and relocated
horn
BC Rail has correct fuel tank size and location, four rock lights
(in nose and pilot) and rebuilt steps
B-units are part of A/B set, single A units can be purchased
separately.
P&W version has correct AAR-trucks and headlight variation
Testors - Spray Enamel Primer (3oz)
Testors 3 oz Aerosols come in over 50 popular colors and 9 different finishes. They offer superior adhesion to a variety of surfaces including wood, metal, glass, terra cotta, ceramic bisque and more. They are fast drying and easy-to-apply which means quick project completion.
HO Dash 8-40CM - DCC & Sound - Canadian National: Website #2429
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
Flat Brushable Acrylic - Safety Yellow - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
Single Lamp Post Street Light - 3 sets
Use to light street corners, sidewalks, parks and more. 20mA/set RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 0.484 in w x 2.76 in h (12.3 mm w x 70.1 mm h)
HO Family Day Out (7)
HO GMD-1 - DCC & Sound - Canadian National (1900s Noodle w/ Red Cab) #1910
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
HO Enterprise 2-Bay Covered Hopper - Penn Central PC #881559
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
GMD SD40-2f - DCC Ready - CP Rail (Round Porthole, White Stripe) #9024
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
EMD E8A (DC/DCC/Sound) CP/VIA Style Undec
Rapidos E8 model features:
3D laser-scanned body shell
Accurate nose and roof contours
Seven different noses
Three different back ends
Two different sides with and without lifting lug covers
Three different steam generator options
36inch fan, 48inch fan or non-dynamic brake options
Single- or dual-headlight configurations
Freight or passenger pilots
Three styles of side grills
Original porthole sides or rebuilt with blanked sides (including unique variations)
Skirted or non-skirted fuel tanks
Original square and sloped or Hyatt roller bearing journal boxes
Heavy die-cast chassis
Smooth running drive system with all wheels powered
Complete lighting effects headlights, class lights, backup lights, ground lights, cab lights and more
Numerous road-specific detail parts in both plastic and etched metal
Details Include:
Side portholes
No dynamic brakes
Single MU door nose, right of headlight
Freight pilot
Standard rear
Nose-side grab ladder, Canadian style
Early-style square bearing trucks
Dual steam generator, closely spaced
Horizontal grill
Side skirts
Operating ditch lights
#1800 has modified porthole spacing
HO 35Ft Fruehauf Integral-Post Volume Van - Silver/Unlettered
A transport revolution started in the 1950s - the advent of the piggyback trailer. No longer was it necessary to transfer loads to and from freight cars to local trucks for shipment or delivery. Instead, the entire loaded trailer could be driven from a loading dock to a freight yard, loaded on a train, then delivered to its final destination.
For the 1955-60s era, we offer the 35Ft Fruehauf Integral-Post Volume Van with ribbed sides and rounded corners. These trailers will also be available with or without curb-side loading doors.
Our 1960s offerings include two designs; the 40Ft Fruehauf Exterior-Post Volume Van and the 40Ft Fruehauf Fluted-Side Volume Van, both with side door options where appropriate and the later in both refrigerated and dry van forms.
All of these trailers will be available in a variety of prototypical paint schemes for both railroads and private trucking companies. All schemes will be offered in three individual numbers.
HO 40ft Corrugated Container - Wan Hai (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Each container is individually numbered
N Scale 1978 Ford Fairmount Sedan - Dark Jade Metallic
Features:
Side view mirrors
Head and tail light glazing
Interior detail
Simulated rubber tires
Under carriage detail
N Scale 53ft Stoughton Containers - EMP, Set #2 (3pk)
MODEL FEATURES:
- Fully assembled
- Magnetically stackable
- Each container individually numbered
- Razor sharp printing and painting
HO NSC 60ft Ingot Flat Car - RTAX Liberty Railway Services
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
With Platforms & Lenses - pkg(2)
Used on Dash-9 and AC4400CW
Die-cast metal
HO 89ft Thrall Bi-Level Auto Carrier - CP Rail/TTGX #160491
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
Juneco Scale Models Back Up Light - DDGM Pyle Double Vertical w/jewels, plastic (2/pkg)
HO Siemens Venture Passenger Car - VIA Rail Canada Coach #2900
The Siemens Venture is the latest generation of medium-distance passenger railcars for North America. Constructed by Siemens Mobility in California, the Venture cars currently see use on Amtrak state-supported services in the midwest and California, while VIA Rail Canada has introduced the series on corridor services in eastern Canada. The Bachmann Venture Cars have been developed in collaboration with Siemens, using original design documentation to ensure prototypical accuracy.
Features include:
Fully furnished and lighted interiors
Road-specific exterior configurations
Separately-applied details
Magnetically operated E-Z Mate Mark II couplers
Blackened machined metal wheels with RP25 contours
Optional Close-couplers included
Performs best on 18inch radius curves or greater
HO - 70-Ton 14-Panel 3-Bay Hopper - Ready to Run - Delaware & Hudson #9107
Bowser HO Scale ready-to-run 70-Ton 14-Panel 3-Bay Hoppers are based on typical cars used by many railroads across the continent for hauling coal and aggregates. These layout-ready cars feature accurate decoration, molded details, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton 14-Panel 3-Bay Hopper is a great addition to your 1950s and later diesel-era car fleet.
Combo Set of Abrasive Files (18pcs)
Flex-I-File gets into spaces that other tools cannot. Fitting perfectly into tight corners and interior angles even the tightest spot is not out of reach. Eliminate imperfections on your project by gradually progressing through the grits from coarse to fine!
Contents: 1 Anodized Aluminum Frame and 17 Assorted Abrasive Refills
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Seaboard Air Line (6pkg)
6-Pack includes the following numbers, all individually packaged: #19703, #19746, #19752, #19761, #19779, #19792
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Storefront Signs - Main St. (Set #4)
Blair Line HO Scale Business and Storefront signs are printed in appropriate colors on thin plastic for easy assembly or placement with plastic cement or CA glue. Colorful signs are based on real signs and many include two identical signs for back-to-back, two-sided mounting. Steam and diesel-era signs make great roadside, street-side, trackside and structure details.
HO BiLevel Commuter Car - Metrolink (Ribbon & Original) Set #1
Los Angeles
Includes: Cab: 208 Coaches: 2838, 2850 (Series 2)
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Canadian General Transit #8010
Date: NEW 8-32
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
HO GP40-2 - DCC Ready - ONT #2202
Detailed Information
ONT FEATURES:
Ex-B&M
Corrugated grilles
Non-dynamic hatch
Front and rear ditch lights
Side-mounted hood bell
M3 horn on long hood
Blomberg M trucks
Large fuel tank
Large front anticlimber
Small EMD front plow
Lit number boards and class lights if equipped (effect in DCC)
The Ontario Northland Railway is operated by the Ontario Northland Transportation Commission, part of the government of Ontario, Canada. Purchased in 2005, these ex-BM GP40-2s were repainted into this bright and vibrant scheme. A few kept their nose class lights after rebuild. The units have been seen operating in both freight and passenger service.
ROAD NUMBER SPECIFIC FEATURES:
#2200
Ex BM 311; class lights
#2201
Ex BM 300; removed class lights from nose
#2202
Ex BM 304; nose class lights only
GP40-2 LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
-Nub- style walkway tread
Windshield wipers
Lift rings
Wire grab irons
Walkway tread
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
Blomberg-B or Blomberg-M trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
HO 50ft Covered Gondola - SOO #67474
MODEL FEATURES:
- 70-ton Roller Bearing trucks
- Removable cover
- Separately-applied brake wheel
- Weighted for optimum performance
- 33 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Body-mounted McHenry operating scale knuckle couplers
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inch
PROTOTYPE AND BACKGROUND INFO:
Gondolas are low-sided railroad cars that are used for hauling bulky loads that don not need protection from the weather. The Roundhouse 50ft gondola is representative of larger cars that began appearing on the rails in the early 1950s, and many survive today working for modern roads and contractors.
EMD E8A (DC/DCC/Sound): VIA Rail Canada #1898
Otter Valley Exclusive!!
SL10 - Code 100 HO North American-Style Rail Joiners (24/pkg)
Description:
Nickel silver metal conducting rail joiners.
Use with HO/OO, O, and O-16.5 scales and Code 100 rail.
24 metal rail joiners per pack.
N ACF 4650 cu ft 3 Bay Hopper - SOO Line #74228
14-Panel Coalporter(R) Coal Gondola - Ready to Run - Value Line -- Western Fuels
This InterMountain Railway Co. Value Line 14 Panel Coalporter Coal Gondola features a detailed injection-molded body with fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The Coalporter Coal Gondola is perfect for building your 1990s and later unit coal train fleet.
HO ACF PD3500 Flexi Flo Hopper -
PC/Conrail Scale Test Car Version 3(996H) -inservice 1969
Car No. CR 80027
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
Scenic Accents(R) - Animal Figurines - Black Bears (6/pkg)
HO EMD SW1200 - DCC/Sound - Chicago & North Western #1211
- Flexicoil Trucks
The HO Scale Rapido SW1200 features:
- Designed from original blueprints and field measurements
- Heavy diecast frame, chassis and gearboxes for superior pulling power
- Rapidos renowned silky smooth-running drive system
- Working cab interior light and inspection lights
- Fully detailed Type A or Flexicoil trucks, as appropriate
- Full cab interior with working cab interior light and non-working fire extinguisher and fridge (where appropriate)
- Working headlights and illuminated number boards at both ends
- Some models have a rotary beacon or flasher/strobe as appropriate
- Separate handrails, including crash bars inside the cab
- Multiple exhaust stack and battery box door styles
- With or without working drop steps, as appropriate
- Incredible underbody piping and conduit detail - a Rapido hallmark!
- DC/Silent or DC/DCC/Sound versions featuring an ESU LokSound decoder with accurate recordings from a 567 prime mover
OVR Exclusive - HO Bi-Level Auto Rack - Canadian National/TTGX #706105
LIMITED EDITION!
OVR SPECIAL!
FEATURES:
-Ready-to-Run
-Etched metal see-through side panels
-Early style and later style anti-vandalism panels per prototype
-Opening End Doors for Modeling a Loading or Unloading Scene
-Roadname specific details
-Flatcar numbers match rack numbers per prototype
-33in InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Doors are fragile and not meant to be opened and closed numerous times. Open slowly and carefully to prevent damage!
HO GP9RM - DCC & Sound - Canadian National (Stripes) #4110
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO 85ft Pullman-Standard Regal Series 4-4-2 Sleeper - BNSF (Cajon Pass) #66
Passengers on your Walthers Proto Combined Super Chief/El Capitan are sure to have a memorable trip aboard the 85ft Pullman-Standard 4-4-2 Regal series Sleepers! Santa Fe purchased 16 of these spacious sleepers, fitted with four double-bedrooms, four compartments, and two drawing rooms for postwar Super Chief service, which were later used on other name trains and served with Amtrak.
Ready for operation or display, features of this Walthers Proto replica include:
- Real metal finish simulates stainless steel
- Correct GSC 41-NDO Outside Swing Hanger trucks as used in the 1960s
- Factory-installed grab irons
- Prototypically accurate window tinting
- Window gasket details as appropriate
- Sprung operating diaphragms
- Modeler-installed extended drawbars for 22 inch radius curves included
- Turned metal RP-25 wheelsets and correct trucks with built-in electrical contacts
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24 inch radius is recommended for operation.
Peco Code 83 SL E 8351 HO Streamline #5 Electrofrog Turnout - Nickel Silver Right Hand
HO Scale
Shipped from Ontario Canada
83 Line items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings. For more details on Electrofrog turnouts, see our Wiring the Layout publications Nos 4 and 21.
Recommended to be used with:
SL-110 Conducting Rail Joiners: Nickel Silver for PECO Code 83 track
SL-111 Insulated Rail Joiners for PECO Code 83 track
SL-14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork
Expand container traffic on your 1960s and 70s era HO layout with this series of authentic models from - SceneMaster, featuring:
- Standard end-door and right-side door versions as appropriate
- Authentic rivet, door latch and hinge details
- Colorful period schemes
- Perfect period loads for WalthersMainline G85 and 60ft Pullman-Standard VTTX container flatcars (each sold separately)
1953/68 Diamond T734 Tandem Reefer Van - Unpainted and Resin Cast Kit
HO Alco RS-11 - DCC & Sound - Lehigh Valley (ex-PRR) #8648
The Rapido HO Scale RS-11 model features:
-Correct hood and roof profiles 3D scanned from the prototype
-Operating number boards, headlights and green and white class lights and cab control stand lighting
-Rapido innovative dead straight metal side handrails with plastic stanchions
-Roadname-specific details including steps, lights, equipment boxes, handrails, fuel tanks, air intake louvers and more!
-Full underbody piping, conduits and steam lines, where appropriate
-Correct roadname-specific corner steps
-Separate grab irons and wire handrails installed at the factory
-Heavy, die-cast chassis and full, multi-colour/color interior
-Rapido proven 5-pole skew-wound motor with dual flywheels and silky-smooth drive
-DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound)
-Accurate sounds recorded from a real Alco 251B prime mover
-Factory-installed Macdonald-Cartier couplers mounted at the correct height
HO Custom Street Signs - RR Crossing (4)
Pre-painted and labeled RR Crossing warning signs.
40Ft Corrugated Container Mitsui OSK Lines 2pk
MOFU #066444(2) and MOFU#054846(3)
HO Conrail (CR) G41A Repaint 1976 w/o Hoods PRR Shops G41A Coil Car
CR G41A Repaint 1976 w/oHoods illustrates an early CR repaint. Check out the thinner style CR logos, PC/CR style data stencils, and era appropriate ACI and PC/CR style double COTS. The early CR cars maintained their hoods for protection of the coil shipments. If you want to model the car later in their service lives, do not panic: The hoods are removeable. The interior troughs have all of that loading and identification data, too. The ends feature the original shorter style coupler lift bar brackets and Morton style crossover platforms. The 125-Ton trucks feature rotating Timken caps, 38in wheels and accurate brake beams with truck mounted brake details.
Also, these cars look great loaded with our all-new coil loads sold separately!
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
EMD SD45 - DCC & Sound - Penn Central #6220
Product Information
Handle fast freight on your HO railroad with the rugged WalthersProto SD45! Introduced in 1966 with a 20-cylinder 645 prime mover cranking out 3600 horsepower, SD45s quickly became the preferred power for expedited freights and piggyback trains, going on to new careers with regionals and shortlines into the 1980s and beyond. Ready for service, features of these WalthersProto replicas include:
NEW - High, short hood versions of Norfolk & Western and Southern Railway units
One time run of these road numbers, order now - limited quantity available!
Prototypes in freight service from 1966 to early 2000s - several preserved today!
Available with LokSound 5 Sound and DCC for DCC and Standard DC layouts
Road-specific details
Superb paint and lettering
Five-pole, skew-wound, high-torque, high-efficiency can motor
Helical gears with 14:1 ratio for smooth, ultra-quiet running
LED constant and directional headlights as appropriate
Easy multiple-unit operation
Heavy die-cast metal underframe
Correct size RP-25 metal wheels
Road-specific details on this model include:
Leslie SL-3 air horn
Sinclair radio antenna
Cab signal equipment box
Flexicoil-C trucks with high-mount brake cylinders
HO Concrete Coaling Tower - Kit
Product Information
When steam ruled the rails, the prototypes for the Walthers Cornerstone Concrete Coaling Tower were familiar sights at every engine terminal. Some also stood alone on main lines, ready to service passing trains that might require refueling along the way. While early designs were made of wood, later models were made of fire-proof concrete. Hoppers of coal would be spotted for unloading above a covered dump pit. Lifting machinery hauled he coal to the top, where it was stored in the bin. Gravity and positionable chutes took over, delivering a steady stream of coal into waiting tenders below. Many of these durable structures outlived their usefulness, but proved too expensive or difficult to tear down. A few still stand, stripped of their steel hardware, a monument to days gone by. Whether alive with action or quiet and abandoned, this model can be the focal point of your engine service facilities or a great scene along your mainline. Its complete with covered unloading pit, machinery house, lifting equipment and positionable chutes to serve two tracks. As the prototypes go, this model represents a medium sized tower, making it ideal for layouts large or small. The plastic parts feature realistic concrete and steel detailing and are molded in realistic colors. A complete set of instructions and decal signs are included.
The finished Concrete Coaling Tower measures: 4-1/8 x 6-3/8 x 11inch (10.3 x 15.9 x 27.5cm) with tower and shed.
Must-have for steam-era layouts
Serves two tracks
Positionable chutes
Molded in appropriate colors
Easy-to-build plastic kit
Molded in appropriate colors
Decal signs
This structure is ideal for use with the full line of Walthers Cornerstone HO locomotive servicing structures.
Mine Run Coal (10.8 in3)
Use Ballast and Coal for any scale to model realistic railroad track, gravel roads, crushed rock and stones, hopper loads and coal piles. Available in several colors and sizes, you can mix and match for a superior realistic effect. Ballast and Coal are lightweight and easy to use. Watch the Woodland Scenics video about how to apply it and attach with Scenic Cement(TM).
ALLERGY CAUTION: Ballast contains tree nut by-products.
HO Trinity 3-Bay Hopper - NS #294211
MODEL FEATURES:
- Two body styles represent 10-panel and 12-panel variations
- Coupler cut lever and air hose on each end
- Separate brake cylinder, valve and air reservoir with wire brake plumbing
- Photo-etched metal roofwalk
- Body-mounted, McHenry operating scale knuckle couplers
- Standard size coupler draft gear box with screw mounted lid
- Genesis 100-ton trucks with animated spinning roller bearing caps
- 36 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Weighted for optimum performance
- Minimum radius: 18 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO ACF 50Ft 6In Boxcar - Railbox (Large Logo) #32745
FEATURES:
Prototypical non-terminating corrugated ends
Diagonal paneled roof
Single 10-foot YSD design sliding door (non-operating)
Detailed cross-member attachment rivets on the side sills
Weighted, detailed underframes
True scale dimensions with acccurate details
Equipped with AccuMate knuckle couplers
All Scale Realistic Trees Kits - Green Deciduous Medium Green - 3/4 - 3inch Tall pkg(21)
Six selections of tree kits in deciduous or conifer styles ranging in size from 3/4inch to 8inch give you the opportunity to make easy and truly unique trees for your layout. Create the armature shape you want then add as much or as little foliage as desired. Easy for beginners.
HO ACF Type 27 Riveted 10,000 Gallon Tank Car - Gulf Oil (Repaint) #5024
Built: 11-35
FEATURES:
- All are Ready-to-Run
- Laser Sharp Painting and Printing
- 33 Inch Intermountain Metal Wheelsets
- Metal Knuckle Couplers
NOTE:
Minimum Radius - 18 inches
HO 50Ft PCF B70 Boxcar - w/ Superior Doors - Canadian National #555070
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
Union Pacific Harriman #9004
Built new in 1955 by American Car & Foundry, UP 9004 was set aside for special assignments in 1974. In 1987, the car was named Harriman in honor of Edward Harriman and his sons Averell and Roland, who all served as Directors of the company. From 1989 to 1990, the car was named Sun Valley.
Data - Freight -1 Ton - Black & White Lettering - Large Capacity - Waterslide Decal
1985+
EMD GP9 Phase II - LokSound 5 DCC & Sound - Union Pacific #267
(Armour Yellow, gray, red)
Product Information
A signature diesel for your HO railroad, the WalthersProto GP9 Phase II with High Hood is a real workhorse! With revised tooling and road-specific details, the models are based on prototypes built from 1955 to 1957 (known to modelers and railfans as the -phase two- version), and many are still in service today.
Features of the models include:
Limited-edition - one time run of these roadnumbers
Based on units in service from 1955 to the present
Improved hood contours and Phase II detail
Road-specific details
Wire grab irons and lift rings
21-pin DCC plug
Warm white LED constant and directional headlights
14:1 helical gears for ultra-quiet and smooth running
5-pole, skew-wound, high-torque, high-efficiency can motor
Easy multiple-unit operation
Superb paint and lettering
Heavy die-cast metal underframe
Proto MAX(TM) metal knuckle couplers
Based on engines in service from the 1960s to 1970s with:
Leslie S3L-R air horn on stand
Whip-style radio antenna
Mars dual sealed beam headlight
Short-hood forward operation
Working Western Cullen beacon
UP-style air vent
Canvas sunshades
Large armrest
HO 18ft Galvanized Steel Grain Bin - Kit
(Narrow - 2.66 inch Corrugation)
Corrugated steel grain bins are a staple in any agricultural setting, placed on farms, elevators, industries, and beside railroad tracks. Used with a variety of farm commodities, these bins provide a safe, dry place to store that commodity until it goes to market.
With several styles to choose from, these grain bins will look right at home on your layout. They feature prototypical corrugations, realistic galvanized steel appearance, various side sheet heights, and a variety of diameters.
Narrow corrugation bins have corrugations spaced a scale 2.66 inches and the rings are 32 inches tall. Wide corrugation bins have corrugations spaced 4 inches apart with 44 inch tall rings.
All bins are easy to assemble - just stack the rings, glue them together, attach the roof and you are done! Every ring comes as one solid piece, so no time consuming and messy assembly of individual side sheet pieces to create each ring, saving you time and frustration!
What size bin will fit your space? Try our grain bin size calculator or printable template.
https://www.iascaled.com/store/GrainBinSizeCalculators
https://iascaled.com/docs/ho-bin/GBM-HO.pdf
HO Scenic Accents - Shootin Hoops (7pcs)
Bring your layout to life with HO scale Scenic Accents figures and accents that tell your layout story with authentic detail.
Six boys enjoying a street game of hoops. Backboard and hoop are included, but like many street games ? who needs a net?
HO EMD SD70ACe - ESU(R) Sound & DCC - BNSF Railway #9374
(H3; orange, black, yellow; High Headlight)
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Thousands in service from 2005 to the present
- Fully assembled
- 21-pin DCC plug
- Easily handles 18 inch radius curves (22 inch or larger recommended)
- Six powered axles per unit
- Molded drill starter points for grab irons - easily added with the EMD Diesel Detail Kit (910-251, sold separately)
- Correct size RP-25 metal wheels
- Proto MAX(TM) metal knuckle couplers
Equipped with ESU Sound for DCC and DC layouts featuring:
- 4 function outputs with brightness control by CV
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch prime mover sounds
- Compressor
- Dynamic brake
- Multiple realistic LED lighting effects
-High or low headlights per prototype
- Working front ditch lights
- Constant and directional lights
Same powerful drive as WalthersProto(R) locos featuring:
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant and directional LED lights
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
HO EMD SD70ACU - DCC Ready - Canadian Pacific CP (Sand) #7021
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
HO Trenton Works 6348 CN Boxcar - Canadian National (w/ Conspicuity Stripes) #598045
The Rapido Trains HO scale Trenton Works 6348 CN Boxcar features:
Designed from original blueprints and field measurements.
Redi Roof 1 (peaked and overhanging).
Correct handbrake styles and housings
Barber S-2 cast steel trucks
Full underbody detailing
Correct brake platforms and running boards
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme
HO EMD SD70ACU - DCC Ready - Canadian Pacific CP (RCAF Camo) #6644
CP FEATURES:
Center mounted nose door lock
No blue flag brackets
Special Military Tribute paint schemes
Canadian Pacific (CP) unveiled five specially painted locomotives on Remembrance Day in Canada and Veterans Day in the U.S. honouring the culture and history of the armed forces. The five Electro-Motive Diesel SD70ACUs will take the message of military pride across the CP system.
CP 6644 wears the camouflage colors applied to Royal Canadian Air Force -Spitfire- fighter planes flown at the Allied invasion of Normandy, France,
on June 6, 1944.
CP 7020 wears North Atlantic Treaty Organization green, which the Canadian and U.S. armies apply to fighting vehicles and equipment serving in
temperate climates.
CP 7021 wears the sand color that the Canadian and U.S. armies apply to fighting vehicles and equipment serving in arid climates.
CP 7022 wears the grey, red and black color pattern of modern Canadian and American warships.
CP 7023 wears a two-tone gray paint scheme designed after the livery applied to Canadian and American fighter jets.
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
HO Duplex Sleeper - CNR - 1954 Scheme #1147 / Enwood
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
Alco RS-11, 2nd Run - Diesel Locomotive - DCC Ready - Delaware & Hudson - Lightning Stripe #5000
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO Scale SD30C-ECO - DC/DCC Ready - Canadian Pacific #5012
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
Manchester Liners/Modern Container Ship - Unpainted and Resin Cast
FEATURES:
- White Polyurethane Resin Kit
- Unique One Piece Castings for Easy Assembly
- Built at Gijon, Spain 1971
- Scrapped at Aliaga, Turkey 2002
- Typical Short Sea Container Ship
- Measures 39-3/8 Inches Long When Complete
- All Deck Fittings Included
- Waterline Model
- Era: Suitable for 1960s to Present
- Full Color Instructions
- Decals Included
N Scale Drive N Dine Drive-In Restaurant - Built & Ready Landmark Structures - Assembled
Product Information
Features rooftop ice cream cone, soda straw canopy supports and plenty of fun accessories.
Measures: 4-1/4 x 2-29/32inch 10.7 x 7.4cm
HO ET44 Tier 4 - DCC Equipped - CN Heritage/BC Rail #3115
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO FM H16-44, Standard DC, Canadian National: Wet Noodle Scheme No.2217
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapidos proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO Lightweight Coach - Canadian National - Wet Noodle #5599
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO Procor 3000CuFt Aluminum Hopper w/Handrails - UNPX/ Procor Wordmark - 6pkg #3
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO IC Centralia Steel Wide-vision Caboose - Illinois Central Gulf (IC Orange I-Ball Repaint 1974+) #199414
Product: IC Centralia Steel Wide-vision Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber or Gould Caboose Roller Bearing with separate brake beam part as appropriate for each paint scheme
Wheels: CNC-Machined 33inch Wheels
DC/DCC Lighting Features: interior lighting as well as lighted IC(G) box-style red-green markers
Illinois Central Gulf (ICG) -Orange I-Ball Repaint 1974+- represents a common repaint scheme applied by the now Illinois Central Gulfs Centralia Shops. The GM&O and IC merged in August of 1972, and cabooses were painted with a new version of the logo: The ICs -split rail- was filled in to form the ICGs -solid I.- The ICG didnt bother to mask off the aluminum window frames, so they are now orange with the rest of the carbody. These accurate repaint car numbers are carefully selected from the 1972-built group of cabooses. That means they feature a Pullman -bow-tie- panel roof. But there is more to it that that - along with PS panels, the roof features a completely different construction layout, and Apex walkway than the earlier Stanray-equipped series. The underframe details also match the 1972 Centralia lot, including accurate brake components layout and the classic IC-style battery box. This group of cabooses was built with Microphor chemical toilets, so there is no visible dump pipe on the underframe. Take a minute to enjoy the finer details of this model, including Timken style roller bearings and flexible rubber air hoses. The fully-painted interior is illuminated with LED -warm- lights to replicate incandescent bulbs, and the ends feature accurate, lighted IC(G) box-style red-green markers for the era.
Shaper Sheet (18 x 72 inch roll)
Use this unique material to model all types of terrain. The strong, pliable sheet can be shaped and reshaped to create any level of detail, and it holds its form without any understructure. This material is formulated to mechanically bond with the plaster to create a thin, hard shell ready for landscaping. Ideal for layouts, backdrops, dioramas, displays and arts & crafts.
1 Roll/pkg - 9 inches wide x 72 inches long, 4.5 ft2
GP40-2 - DCC Ready - GT #6410
Detailed Information
NEW FEATURES:
All-new LED lighting
Rubber MU hoses for durability
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; were excited to include new features often requested, to the GP40-2 and upcoming Genesis models.
GTW FEATURES:
Former DT&I units; see above for major spotting features
#6408:
Front class lights removed.
#6410:
Front class lights retained.
Era: 1980s+
#6420:
Front class lights removed. Replacement horn & radio antenna. Retrofitted with ditch lights and waste retention tank.
Era: 2000s+
#6419:
Retained gong bell on nose. Retrofitted w/ large snowplow.
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
PROTOTYPE SPECIFIC INFORMATION
By the early 1970s, many first generation diesels were reaching the end of their service lives. The most common replacement locomotives became the GP40-2. EMD began production of the 16-cylinder, turbocharged, 3000 horsepower engine in 1972. These locomotive were developed for service where higher horsepower and faster service were preferable. A major feature for the GP40-2 was the introduction of the -dash 2- modular electrical cabinet. For more than 40 years, the GP40-2 has worked main line freights, locals, switching jobs, yard service, and helper service. Many remain in service today.
N ACF 4650 cu ft 3 Bay Hopper - Norfolk Southern #251087
HO 40Ft Standard Height Container - China Shipping (CCLU) Set #1
FEATURES:
40Ft based on corrugated design with logo panels
All containers feature opening doors
Accurate painting and lettering
3 pieces per set
PRR X31A Single-Door Boxcar: Plain Keystone - Stores Department - Single Car #497291
Detail Variations:
3-pack includes the following numbers:
#497284
#497291
#497329
Rapidos X31A Boxcars Feature:
Both Single- and Double-door versions available
Complete underbody detailing with all piping
Super-detailed Barber PRR 2D-F12 trucks
Insulated blackened turned metal wheelsets
Separate grabs and ladders
Accurate paint schemes
Multiple car numbers per scheme
Factory-installed Macdonald-Cartier couplers
Available in singles or multi-packs.
Multi-packs boxed for individual sale
HO RTR 68Ft Bulkhead Flatcar - Trailer Train TTPX #82088
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO Greenville 86Ft Double Plug Door Box Car - Norfolk & Western (Delivery 1-1978) #861294
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Norfolk & Western (NW) -Delivery 1978- replicates another major player in the world of Greenville 86Ft Boxcars. The NW rostered several Greenville series, but the 1978 order was the biggest. In fact, this 1978 B-138 class of 317 cars was the biggest Greenville order of any railroad. The bold NW graphics are almost understated on a boxcar of this size, but this paint scheme is one example that literally defines modern auto parts trains. The NW cars feature the correct late-Greenville body with 5 grab irons on each side along with body mounted brake gear. Those gorgeous 100-Ton -Low Profile- Barber S-2-C trucks show off the accurate rotating Timken bearing caps. SKUs -01 through -06 have January 1978 data and SLUs -07 through -12 have February 1978 data.
ZipZ(TM) Solderless Connection System - For Tortoise(TM) and SMAIL(TM)
Now layout wiring can be easily connected to the ZipZ terminal block and then the edge connector simply slides onto the TORTOISE or SMAIL circuit board. No soldering necessary to the machine. ZipZ also fits the older TORTOISE circuit boards (the tan ones).
Available in a single piece package, a cost saving 6 pack and for even more savings, a 6 piece do-it-yourself kit version where soldering IS required...but not to the switch machine!
HO Railroad Roman - Letters & Numbers (Black) 10inch-20inch - Waterslide Decals
Description: Railroad Roman Letters & Numbers (Black) 10inch, 14inch, 18inch, 20inch
HO Master MP-36 - DCC/Sound - Metra #403
Features:
- Golden-white LEDs
- Realistic die-cast underframe
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Realistic lighting effects including ditch lights and in-cab light
- Metal knuckle couplers
- Detailed cab interior
- Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
- Coupler cut levers
- Multiple unit hoses and trainline hoses
- Recommended 22 inch radius with Atlas passenger cars
DCC Ready Units:
- Equipped with a speaker for easy conversion to sound with the addition of a decoder.
DCC ESU LokSound Functionality Features:
- Over 20 sound effects are available including Head-end Power (HEP), engine start-up and shutdown, prime mover sounds through all eight
notches, bell, air horn, air compressor, dynamic brakes and more.
- There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
Coarse Turf - Yellow Grass - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
Model Wash - Olive Green - 35ml Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Olive Green is recommended for adding shadows around rivets or recessed details on vehicles painted in Olive Green or faded Pale Green.
19/32 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 19/32 inch
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Western Pacific #20189
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
1964 Dodge 330 Taxi - Unpainted and Resin Cast Kit
St L& H (St Lawrence and Hudson) #5593 - ESU LokSound & DCC - Just Arrived
81inch Nose, Chicken Wire Radiator Grill Covers, Double Row of Louvred Doors in Compressor Area, Ditch Lights, Removed Class Lights
GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, DC versions have 21 pin DCC socket, Flywheels, Can motor, 40inch wheels, RP25 flange, KD couplers.
HO 1/87 New Look Bus (Deluxe) - Long Island MSBA #671
The Rapido Trains HO scale New Look Bus models features:
-Correct tubular profile traced from a 3D-scan of a real New Look Bus.
-Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
-Optional left-side emergency exit door and either single- or dual-stream rear doors
-Full interior including separate bench seats and grooved flooring.
-Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
-Steerable front wheels and REAL rubber tires.
-Three types of bumpers − steel, water and rubber.
-A wide variety of optional detail parts included.
-Separate advertisement frames included with each model.
-Pre-installed route destination signs for added realism.
-Working interior lights, headlights and tail lights.
-Installed as appropriate
A 9-12 volt DC power supply (not included) is required to power the lighting features.
HO Scale 17,600 Gallon Tank Car - Cargill (UTCI Repaint) #5091
Features:
- Three separate styles of manway / platform / ladder arrangements (used as appropriate per road name)
- Fine scale railings
- Separately applied brake rigging
- Separately applied manway ?clamshell?-style cover (used when appropriate per road name)
- 100-Ton Roller Bearing Trucks
- Accurate painting and printing
- Full stand-alone brake system details
- Bottom outlet valve detail
- Stand-alone heater coil pipes
- Highly detailed body with prototypical jacket seams
- See-through top platform grating
- AccuMate couplers
Tru Color Paint - Acrylic - Flat Weathered Iron Oxide Rust - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO RTR PS-2 2600 Covered Hopper - Detroit, Toledo & Ironton #11107
Detailed Information
MODEL FEATURES:
Flush or overhanging roof per prototype
Highly detailed end cages and etched end platforms
Minimum radius: 18inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Body-mounted, McHenry scale double-shelf knuckle couplers
Fully assembled and ready for your layout
Machined metal wheels with RP25 contours operate on all popular brands of track
Spray Can - Brilliant Orange (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO Enterprise 2-Bay Covered Hopper - Penn Central PC #881832
The Rapido Trains HO scale Enterprise covered hoppers features:
Designed from original blueprints and field measurements
Both NYC and CN versions are available
Fully detailed body and underframe
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers per scheme
RTR 30RTR 30,000 Gallon Ethanol Tank Car - Archer Daniels Midland - (3 pack) #1
Detailed Information
30746, 30800, 30855
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
HO Urban Retaining Walls - Kit
The Urban Retaining Walls kit features:
- Simplifies modeling elevated tracks in new or existing scenery
- Easy to use with Urban Overpass kits & Elevated Commuter Station (both sold separately) - adaptable to other bridge kits
- Simulates poured concrete walls built from the 1920s on
- Great value with 60 parts molded in concrete gray including the following:
- 8 tall, 4-panel retaining walls each 8 x 2-1/2 inches
- 8 short, 4-panel retaining walls each 8 x 1 inch
- 8 tall connectors
- 8 short connectors
- 8 customizable end plates (use with Overpasses or Elevated Station kits, each sold separately)
- Railings
- 8 short wall supports
- 4 short wall corner connectors
- Easily expanded by combining kits and customized with molded cut lines
NCE 153 HO N Scale Snap-It Quad- Mk2 - Four Snap-its on one board!
FOR TWIN COIL SWITCH MACHINES ONLY
All new easy programming!
Control for 4 twin coil solenoid type switch machines (Atlas, Peco, etc)
Supports the full range of DCC accessory addresses (1-2044)
Runs from track power or external 9-15 Volt DC power supply
Easy address programming, no need to connect it to programming track
Inputs for local control panel push buttons
Simple hook up, 2 wires to the track, 2 wires to each switch machine
Easy programming! Control for 4 twin coil solenoid type switch machines. Supports the full range of DCC accessory addresses (1-2044). Runs from track power or external 9-15V DC power supply (sold separately). Easy address programming - no need to connect it to programming track. Inputs for local control and panel push buttons. Simple hook up: 2 wires to the track, 2 wires to each switch machine.
Model Wash - Dark Yellow - 35ml Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Dark Yellow is recommended for yellow models and light colors. Also very suitable for all camouflages and natural scenes with vegetation, rivers and lakes.
HO Lightweight Coach - CP - Royal Canadian Pacific - #101 / Dominion
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO Value Line RTR - 13 Panel Coalporter - CSXT (Gray) #390544
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
N Scale Flexi Flo Hopper (Late) - Conrail (Flexi Flo Hopper Repaint) #897894
The Rapido Trains N scale ACF Flexi Flo Hopper features:
Two uniquely-different body styles - Early and Late
Unique 125-Ton Barber S-2 trucks
Etched metal running boards
Injection-moulded grab irons
Fully detailed underbody with full discharge piping and brake equipment
Factory-installed air pipes and coupler cut levers
HO 1-3/4 inch 1-Lane Wood Grade Crossing - Kit
This Blair Line HO Scale Wood Grade Crossing is ready to install on your highway and road crossings. Similar to those found all over North America, laser-cut wood kits are detailed with laser-etched boards and bolt holes.
Includes parts for three complete crossings.
HO 40Ft Refrigerated Container - ONE Set #1 (3 pkg)
Road Numbers: SZLU 9564004, SZLU 9544707, SZLU 9556478
(White/Pink)
MASTER MODEL FEATURES:
40-foot High-Cube Refrigerated Container
Composite materials sandwich-sides design
Detailed picture window refrigeration unit with separate parts
ISO Type 45R1
Five hinge / four bar doors with OUT style handles
Each set comes as a 3-pack
HO Scale Super Single Alloy Wheel Set
Truck not included
Pewter cast wheel set of Super Single Alloy type wheels
53 Ft CIMC Containers - Exel (3 pack) #1
Era:2007+
MODEL FEATURES:
-Fully assembled
-Newest horizontal rib front
-Easily stackable
-Separately applied door closure rods
-Each container individually numbered
-Razor sharp printing and painting
N Scale AutoScenes - Lumpys Coal Company
Lumpy prepares to shovel coal from the chute of his vintage delivery truck into a detailed, ready-to-mount coal bin.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:160 N scale models.
Figures included as shown.
HO 52ft Center-Beam Flatcar - Canadian National #604751
Center-beam cars are specialty cars designed for carrying building supplies such as cut wood, lumber, or drywall sheets. They are essentially bulkhead flatcars that have been reinforced with additional central supports for the side-loading of bulk materials. Performs best on 22 inch radius curves or greater.
FEATURES:
- blackened metal wheels
- body-mounted E-Z Mate Mark II couplers
- non-magnetic axles
HO Ready-Made Trees - Sun-Kissed (3/pk)
4-5 inches (10.1 cm-12.7 cm)
Finely detailed, painted, flexible trunks and foliage in a variety of natural contrasts and highlights. Use combinations of types and sizes throughout your layout for superior realism. Trees have planting pin and optional detachable base for temporary placement.
HO Two-Story Frame House - Kit
FEATURES:
- Two-story wood home with basement
- Classic North American house design for middle-class neighborhoods
- Built by the thousands 1870 to 1910s
- Includes parts for two different front walls and porches
- Traditional porch trim
- Separate doors, windows and details
- Easy-to-build plastic kit
- Molded in three colors plus clear window glazing
DIMENSIONS:
5 x 2-1/2 x 4-1/16 inches
HO GE C36-7 - DC/Silent - Union Pacific #9042 (1988 Reletter)
The Rapido Trains HO Scale C36-7 is based on General Electric's higher-horsepower six-axle Dash-7 offering, with a 16-cylinder 3,600 horsepower or 3,750 hp rating (compared to the C30-7's 3,000 hp.) Built between July 1979 and February 1989, over 599 total units were produced. Of those, 129 were domestic orders for Conrail, Missouri Pacific, Norfolk & Western, and Norfolk Southern. Another 40 were made for Ferrocarril del Pacifico and National de Mexico. Lastly, 422 were made for China with many significant export differences, and the final units produced were 8 for Comilog in Gabon. Despite smaller production numbers, the C36-7 was ordered at key moments that resulted in it representing the evolution of GE s Dash-7 line more than the popular C30-7s. When GE launched "1977 Series Locomotives" (Dash-7s) in, they cataloged a C30-7, C33-7, and C36-7. Railroads immediately ordered C30-7's for booming coal service. The C33-7 was never ordered. The C36-7 was ignored until 1979, when National de Mexico and Ferrocarril del Pacifico placed orders. These export C36-7s for Mexico were essentially identical externally to C30-7s, which were being built by the hundreds at the time. Ferrocarril del Pacifico's units were repainted into striking two-tone blue FNM paint and worked both freight and passenger service. Of the 40 C36-7s built for Mexico, only one is still in service in 2024 - Ferromex 9336. Incredibly, despite being the last operating C36-7 (among few remaining operating C30-7's) 9336 was repainted in Ferromex's classy "Diet Coke" scheme in 2023. The Rapido model features railroad and era-specific details, etched-metal grilles and details, roadname-appropriate lighting packages and Rapido semi-scale knuckle couplers on both ends. The smooth-running drive features a five-pole motor with dual flywheels, backed up with the MoPower capacitor system for uninterrupted operation. This standard DC model is DCC ready with a 21-pin interface for easy conversion. The GE C36-7 is part of the line of Rapido Trains HO Scale locomotives.
The Rapido HO Scale C36-7 Locomotive features:
Headlights and rear lights
Class lights, marker lights, or ditch lights, where applicable
Step lights
Lit numberboards
Full traction motor casing details
Metal brake chain on engineers side
Detailed underbody piping and conduit
Separate grab irons
Rapidos innovative dead straight metal side handrails with plastic stanchions
Detailed cab interior
Lighted control stand
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Sound-equipped units feature ESU Loksound V5 decoders
HO 89ft Thrall Bi-Level Auto Carrier - UP/TTGX #150248
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
HO Hawker-Siddeley Van - Caboose - Canadian National - As-Delivered (Red/Orange Steps) - #79240
Rapidos all-new HO scale model has been developed from original blueprints, photos and field measurements. We have included several variations and addition details to accurately model these cabooses from the beginning to the end of their service lives. These include:
Three styles of truck: Andrews, Birdsboro and Taylor
Two different cupola roofs
Two-tread or three-tread steps
Two different sides – standard and Lehigh Valley with rain gutters above the windows.
Three different ends walls – Solid (RDG, CNJ), single window (LV) and double window (WM)
Two running boards: Integral diamond-tread and Alan Wood Superior
Multiple optional parts including stacks, window blanks, etched window frames and screens, tool boxes and more!
Full underbody detail
Turned metal wheels
Operating interior lights
Factory-equipped with Kadee #158 couplers
HO GE 44 Tonner Phase Ic Body - DC/DCC/Sound - Undecorated
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
HO ACF PD3500 Flexi Flo Hopper -
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990
Car No. 897885
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO - Nathan K3 K3LA 3-Chime Air Horn - Lost Wax Brass Casting
HO 2-8-0 Consolidation - Sound/DC/DCC with Smoke - TH&B #103
Industry-leading Model Features:
ALL-NEW Paragon4 Sound & Control System
Synchronized Puffing Smoke with Chuff Sound
Variable Puffing Smoke Intensity and timing
Integral DCC Decoder with Back EMF for Industry Best Slow Speed Operation in DC and DCC
Precision Drive Mechanism engineered for continuous heavy load towing and smooth slow speed operation
5-Pole Can Motor with Skew Wound Armature
Heavy Die Cast Boiler, Tender Body, and Chassis for Increased Tractive Effort
Premium Caliber Painting with Authentic Paint Scheme
Prototypical Light Operation with Separately Controllable Headlight, Reverse Light, Cab Light, and Front Marker Lights
Factory-installed Engineer and Fireman Figures
Many Separately Applied Details such as Handrails, Grab Irons, Ladders, Piping, Cab Glass, Whistle, Brass Bell, Markers, and Many Others
Equipped with Rubber Traction Tires for Increased Pulling Power
Recommended Minimum Radius: 18 inches
Prototypical Sounds of an early USRA steam locomotive, with several alternative whistles
Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLIs own integral DCC Decoder factory installed. Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limiteds Paragon3 Series models.
Paragon4 Sound & Control System Features:
Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
Built-In capacitor pack to navigate imperfect track
Capacitor Pack automatically disabled on program track for full compatibility with JMRI Decoder Pro
Pro Lighting Mode offers individual control of all lights on model
Switcher Mode for precise low speed control.
Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
High Resolution Audio
Quillable Whistle for various whistle lengths and patterns
Choice of 3 selectable Horns
Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
Adjustable bell ringing interval for faster or slower bell
Numerous user-mappable functions with available keys
Johnson Bar Sound at Direction Change
Multiple realistic passenger and crew sounds play on command
Grade Crossing Automatic Signal
Automatic Forward / Reverse Signal - When activated, stopping triggers and stop whistle toot. When moving forward from a stopped position, toots twice. When moving in reverse. toots three times.
Chuff sound intensity varies with load
Individually adjustable sound volumes for each effect
EZ Reset Button for quick return to factory default settings
HO Code 100 - Medium Crossing
The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains.
Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops.
The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary.
Technical Specification:
Length: 168mm
Frog Angle: 22.5 Degrees
HO 60ft Flat Car - Southern (3pk)
MODEL FEATURES:
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Machined metal wheels
- Weighted for trouble free operation
- Wheels with RP25 contours operate on all popular track types
- Body mounted McHenry operating scale knuckle couplers
- Replacement parts available
- Minimum radius: 18 inches
Power Truck - HTC-SD40-2/40T-2/45T-2- 1 per pack
Enamel Paint - Panzer Grey Streaking Grime - 35mL
A very special product for doing streaking grime effects over dark grey surfaces such as German vehicles painted with Panzer Grey. Also suitable for other effects such as add chromatic richness to any piece or surface. This enamel should be mixed well and then painted in vertical lines on the sides of the model. After, you just blend with a clean brush moist with Enamel Thinner to produce some great realistic streaking grime effects.
HO 36Ft RTR 3-Dome Tank Car - ACFX #61
Product Information
Add authentic cars to your steam- or diesel-era layout with these 36Ft 3-Dome Tank Cars from WalthersMainline! Serving a wide range of both producing and consuming industries, these cars were actually three tanks in one, ideal for handling smaller amounts, and a greater variety of product at once. Features of these cars include:
One time run of these roadnumbers, limited quantity available - order now!
Prototypes hauled petroleum, chemicals and similar liquid loads in three compartments
In service from late 1920s to 1960s
Detailed underbody with AB brakes
Fully assembled
Correct 33inch turned-metal RP-25 wheelsets
Proto MAX metal knuckle couplers
Iwata Eclipse ECL4500 - HP-CS Gravity Feed Dual Action Airbrush
FEATURES:
Spray Performance Category: All-Star Versatility
Series: Eclipse
Spray Scale: Fine to Wide
Optimal Working Pressure: 25 - 35 psi (0.17 - 0.24 Mpa)
Head System: E3 - Needle, Nozzle, Nozzle Cap
Nozzle Type: Compression Fit
Feed Style: Gravity
Paint Capacity: 0.24 oz (7 ml)
Action: Dual
Handle Type: Single Cut
Net Weight (lbs): 0.25
Net Weight (kg): 0.11
Assembled Dimensions (in): 1.10 x 6.10 x 2.64
Assembled Dimensions (mm): 28 x 155 x 67
Iwata Eclipse Series airbrushes are known for their versatility. Eclipses high flow allows it to atomize a wider variety of liquids with less need for reducing or thinning. Eclipse Series offers a broad spray range, as compared to other airbrushes, where it is possible to achieve a controlled fine line to controlled wide spray.
This airbrush has 7 ml fluid cup with lid that is ideal for color mixing!
The Eclipse Series feature an exclusive compression fit nozzle that is easy to clean and assemble. The quick flush cutaway handle allows easy access to the needle so that you can quickly empty the paint reservoir for cleaning. Iwatas spring-steel needle resists breakage and our needle packings are solvent resistant for longevity. Iwata Eclipse airbrushes come with a head cap spanner that is used to remove the head cap when accessing the nozzle. Also included is Iwata Lube, which is used to lubricate the needle and main lever mechanism. Hugely popular, Iwata Eclipse Series airbrushes offer all-star versatility!
Who sprays with All-Star Versatility? Makers and creators who...
- Spray with fine to wide level of detail and scale
- Want the ease of a drop-in nozzle
- Have beginner to high-level airbrush skills
- Use thin to thicker viscosity or pearlized spray materials
- Are hobbyist or professional painters
- Want to spray many types of things using one airbrush!
HO SD38 - DCC/Sound - GTW #6251
GTW FEATURES:
All Ex DTI. M3 horn, Xenon strobe, Firecracker antenna, smaller fuel tank.
ROAD NUMBER SPECIFIC FEATURES:
#6250
- Full GTW repaint
- standard EMD exhaust stacks
- front small EMD plow
- regular 81 inch nose
#6251
- Full GTW repaint
- standard EMD exhaust stacks
- front small EMD plow
- regular 81 inch nose
#6252
- GTW patch with faded colors. Large Y-style spark arrestors
- original nose bell
- no plow
(Please note: due to strobe location, it will be included in a poly bag with LED.)
SD38 SERIES LOCOMOTIVE FEATURES:
- Separately applied wire grab irons
- Standard 81 inch low nose without headlight or brake unless noted
- Standard cab with dual beam sealed headlight and glare shields unless noted
- See-through cab windows
- Fixed-position cab side windows
- Oil-bath or Paper air filters per prototype
- Ribbed or smooth blower housing per prototype
- Standard dustbin unless noted
- See-through dynamic brake and radiator fans
- Dynamic or non dynamic brakes per prototype
- Dynamic brake vent per prototype
- Non-turbo exhaust stacks
- Chicken wire radiator grilles unless noted
- F painted on short hood end unless noted
- 2600, 3200 or 4000 gallon fuel tank per prototype
- Air tank
- Printed number boards
- Fine scale handrails
- Fully assembled and ready-to-run
- McHenry® scale knuckle spring couplers
- DCC Ready 21-pin NEM Quick Plug technology
- Genesis motor retrofit kit ATHG63839 compatible
- Highly-detailed, injection molded body
- Painted and printed for realistic decoration
- Bi-directional constant lighting so headlight brightness remains consistent
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup
- 5-pole skew wound motor with flywheels and multi-link drivetrain for trouble-free operation
- Wheels with RP25 contours operate on all popular brands of track
- Recommended radius: 22 inch
SOUND EQUPPED MODELS ALSO FEATURE
- Onboard Econami Sound by SoundTraxx
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Effect lighting (if applicable) using F5 and/or F6
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Nickel Plate NKP #17691
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
The TH&B Ontarian Magazine - Volume 18, Number 1
Official Journal of the Toronto, Hamilton, & Buffalo Railway Historical Society.
HO Scale Tri Light Signal Head
This Tri-Light signal head is based on the GRS Type G as well as other Safetran and US&S designations. We decided to use the same -nickname- as found on the Rrailroad Signals of the US website for clarity.
HO MLW M630 - Standard DC- Executive Line- Minnesota Commercial #73
(Ex-Canadian Pacific #4573)
Ready To Run and Fully Detailed!
Features:
- MU Hoses
- air hoses
- windshield wipers
- operating headlight
- window glass
- can motor
- flywheels
- blackened nickel silver wheels with RP25 flanges
- knuckle couplers
- handrails installed
DCC and Sound version features LokSound Select decoder.
Analog (DC) version has 21 pin socket for DCC module. (recommended decoder - ESU #59629)
Sound Retro Fit kit C628 loco: #691-1225
HO 45ft Smooth Side Trailer - Metallic Blue
MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- Red and white conspicuity stripes
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
HO 36inch Wheelsets w/Metal Axles - pkg(12)
Quick & Easy Upgrade for Steam-, Diesel- & Modern-Era Rolling Stock
Standard Sizes for Most Freight & Passenger Cars
High Quality Turned Metal Wheels for Optimum Performance
Fits Most Popular HO Truck Styles
Fully Assembled, Ready to Use
Each Pack Converts 3 Four-Axle Cars
HO Scale - RTR 60Ft Berwick Hi-Cube Box - Missouri Pacific #269488
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Detailed underbody including full brake gear
Weighted for trouble free operation
Replacement parts available
Machined metal wheels with RP25 contours operate on all popular brands of track
Separately applied wire grab irons and etched end platforms
Machined metal wheels
Body mounted McHenry operating scale knuckle couplers
Minimum radius: 22inch
Evergreen Scale Models 4067 .067in Opaque White Polystyrene O Scale Freight Car Siding (1sheet)
#1711 Roundhead Stainless Steel Screws 2-56 x 3/4 inch- 12pcs
HO 28ft Trailers w/Dolly - Motor Cargo (2pk)
MODEL FEATURES:
- Factory assembled with many detail parts applied
- Two different road numbers per pack
- Some SKUs feature multiple logos and/or decoration variations
PROTOTYPE AND BACKGROUND INFO:
The 28ft trailer provided LTL service for instances where a full size trailer would not be the most efficient. Splitting a haul into two creates more efficiency as one trailer can be spotted and then the second taken to a different destination without repacking. Many of the 28ft trailers can be seen in TOFC service to this day.
HO EMD SD10 - DC/Silent - Dakota, Minnesota & Eastern #548
Dakota Minnesota & Eastern --Conditional Announcement-
- Ex-SOO, nee-MILW units - same features
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Ultra Fine Red Sable Brush - Size 4/0
HO 89ft Thrall Bi-Level Auto Carrier - BNSF #300110
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
Evans X72 Box car: Penn Central w/ Small Logo - Single Car #269268
Detail Variations:
As operated between 1973 to 1976.
6-pack includes the following numbers:
#266577
#266850
#269268
#269320
# 269827
#269899
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
JL Innovative Design 376 HO Billboard Signs - Vintage Tractors 1940s-50s pkg - 6 signs
international Harvester, Ford, Allis-Chalmers, Minneapolis-Moline
Tangent Scale Models HO PS4750 Covered Hopper ICG - Original 1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
ICG -Original 1979- continues our tradition of gorgeous ICG models, this time in the ICG as-delivered simplified paint that was found on more than one-third of the ICG PS4750 fleet. Did you know the ICG added 500 PS 4750 cars to their fleet in 1979 alone? Features for this ICG model include accurate body-mounted brake hardware details and trust stencil lettering variations matching the prototype series groups. Relevant and accurate, this is a critical car for those of you modeling ICG, New IC, or CN era grain cars anywhere in the last 43 years.
HO Assorted Vending Machines - Unpainted Metal Kit
(Ice, Soda, Gum, Popcorn)
HO GMD-1 - DC/Silent - Oregon Pacific (Former CN 1413) #1413
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
N Procor 5820 Covered Hopper - UNPX - Procor Blue Stencil #122098
The Rapido Trains N scale Procor 5820 cu ft Covered Hopper features:
Three styles of roof hatches: round, round with ribs and 20 inch vented cover
Two styles of outlet gates: pneumatic and Miner
Etched walkways
Spare hatches included in polybag to let modeler modify for different era
Full end cage details
Accurate paint and lettering
Multiple road numbers available for each scheme
HO 1937 AAR 40Ft Boxcar - Square Corner Ends - Southern #11048
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
0.032 inch Thick Brass Flat Sheet - 6x12inch
Brass Flat Sheet 6inch Wide x 12inch Long (1 pc)
15.2 x 30cm
Saloon/Tavern Signs, Series II 1930s - 50s
Contains 62 full color posters and signs. HO Scale. Unique weathering and application instructions included in all poster/sign packs.
HO 73Ft Center Partition Car - TTX (w/Forward Thinking Patch) #857048
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
N Scale NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #15452
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains type Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
10Ft 6In Modified 1937 AAR Boxcar - Gulf, Mobile & Ohio #52567
AK Interactive Wash : Dark Brown
GMD SD40-2f - DCC Ready - CP (Round Porthole Sill Dashes) #9023
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX #21125
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
Tangent Scale Models HO 33012-02 Greenville 6,000CuFt 60ft Double Door Boxcar - Erie Lackawanna (EL) #Delivery Red 1966" #67826
Product: Greenville 6,000CuFt 60′ Double Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton Barber S-2 Plain Bearing trucks with ?removed? journal box lids and separate brake beam part
Wheels: CNC-Machined 36″ Wheels
- Conrail CR ?932B Repaint 1976+ Large Logo? transports us back to the early days of Conrail. This group of cars models former NYC Lot 932B cars that were repainted by the CR?s Hollidaysburg Car Shops. These prototype cars feature the 1963-era body ? so that means inset 41? 3? truck centers and a shorter sill. But it is 1976, so the running boards are gone and the brake appliance and ladders have been lowered. We have carefully duplicated all these features on the model. If you look closely, you will see the ?torched off? running board bracket remnants on the roof and the former bolt/strap remnants of the ladders on the sides and ends. The sides of the body have the CR-specific bolster area reinforcements, too! Yes, we tool these specific body and roof versions to get it right. Other features on the model include accurate ?cut-down? low ladders, a Universal power brake/brake wheel, end crossover grab irons and Apex crossover end walkways. The double-plug doors have ?Auxiliary Top Crank? arms to match the era. Underneath, you can identify that beautiful Keystone Center-Of-Car Cushioning underframe with the centered return unit and offset return spring. The underside crossbearer connectors are taller and hang lower on this version of the underframe, a distinctive look that you can easily see from the side of the car. And you just knew this was coming: The model has Tangent?s All-New 100-Ton Barber S-2 Plain Bearing trucks with ?removed? journal box lids. You can actually see the rebuilt Timken bearing caps in there? just like the prototype! These are cool examples of 1970s repaints.
Tru Color Paint 055 - Acrylic - SOO Red 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Scale CM&Q GMD SD40-2F #9024
Ready To Run and Detailed. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, operating class lights, window glass, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC, DCC/Sound version features LokSound Select decoder.
HO Code 100 Custom-Line(R) Crossing - 45-Degree
3 inches (7.6cm)
Atlas HO Scale Code 100 Nickel-Silver Snap Track is widely used for sectional track layouts. Each section features nickel silver rail on black molded-plastic ties with realistic wood surface detail. Snap Track features molded centerline nail holes for easy mounting with #2540 track nails. Snap track is available in a wide variety of curve radii and straight lengths and is fully compatible with Code 100 flex track and most conventional Code 100 track systems. Snap-Track is designed for use with Atlas Snap Track turnouts and crossings and can also be used with Atlas Code 100 Custom Line turnouts. Adapter track joiners #551 are available so you can also use Code 83 track on the same layout if desired.
HO RTR SD39 - DCC & Sound - Guilford/Boston & Maine #690
This locomotive is Primed-for-Grime!
BM FEATURES:
Built as Illinois Terminal, these SD39s were purchased by the NW before going to the Guilford. Our models represent the time period before they were painted into Guilford grey and orange. These well worn black painted units still retained their as-built features such as: battery box-mounted -gong- bell, smaller fuel tank, non DB hatch, and hi-mounted brake cylinder trucks. #690 features a very faded -Norfolk Western- lettering on the long hood.
SD39 SERIES LOCOMOTIVE FEATURES:
Separately applied air tanks
Coupler cut levers
Rubber MU hoses
Photo-etch stainless steel windshield wipers
Fine scale handrails
Non-sound version features 21-pin NEM DCC plug
See-through dynamic brake and radiator fans
Curved radiator fan grab iron
Exhaust stack
Frame-mounted bell (unless noted)
Detailed 4000 gallon fuel tank (unless different capacity is noted)
Flexicoil-C trucks with high or low brake cylinders (per prototype)
McHenry scale knuckle spring couplers
See-through cab windows
Bi-directional LED lighting
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup
5-pole motor with flywheels and multi-link drivetrain for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Painted and printed for realistic decoration
Highly-detailed, injection molded body
Minimum radius: 18inch
Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard Econami sound decoder by Soundtraxx
Engine startup sound sequence
Dynamic brake sound or Non-Dynamic Straight to idle on F4
Extra prime mover and horn sounds exclusive to Athearn
Sounds recorded from a real EMD 12-645E3
Multiple bell sound files user configurable via Configuration Value (CV)
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Current Keeper ready with on board expansion plug
Operating lighting functions with F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via CV changes
Bowser 25226 - HO ALCo RS-3 Phase 3 - Standard DC - Pennsylvania Keystone Scheme #5411
Ready To Run with Locomotive specific details:
air hoses
windshield wipers
grab irons
coupler lift bars
operating headlight
window glass
fuel tank
can motor
flywheels
blackened wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC.
DCC/Sound version features LokSound V5 decoder.
60 Ft Water/Oil tank flat top kit
60 foot tall by 24 foot in diameter riveted steel tank with flat top.
N Scale Short Barrel Ore Hopper - Ontario Northland: Progressive Green (6pkg) #2
Road Numbers Include:
6524, 6527, 6529, 6530, 6531, 6534
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO 45ft CIMC Container - Wan Hai
(red, blue, white)
FEATURES:
- Based on common size & style used worldwide
- Fully-assembled & ready to use
- Colorful paint & lettering schemes
- Separate door latch details
- Realistic loads for WalthersMainline(R) & WalthersProto(R) well cars, sold separately
- Great detail for terminals, highways & industrial scenes
PSC Transfer Van - Canadian National #76513
Model features include:
Inside interior
Rear marker lights
Appropriate trucks
Kadee Couplers
No deposit pre-order!!
Model subject to pre-orders!!
1/16In Fluorescent Blue Rod (10pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
BLUE
HEIGHT IN INCHES
1/16In
HEIGHT IN MM
1.6mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
HO 60ft Gunderson Boxcar - RailNet/RNEX #752033
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Fully assembled and ready-to-run
- Razor sharp painting and printing
- Weighted for optimum performance
- 36 inch metal wheels with RP25 contours
- Minimum radius: 18 inches
HO EMD GP40 - DCC & Sound - Union Pacific #3001
1997+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
HO 1.25 Amp Mobile Decoder for Kato EMD SD70MAC & Other Locos
Features:
- Series 3 HO Plug N Play Decoders with Integrated Plug
- Compatible with Sound Bug (Note this is not a plug n play installation, wiring is required)
- Decoder Lock equipped
Current Rating-Motor: 1.5 Amp (2.0 Amps Peak)
Size: 0.67 x 1.05 x 0.25 inch (17.02mm x 26.67mm x 6.35mm)
Installation: Integrated DCC medium plug
Function Outputs: 6-500mA
Function Type: FX3
Features: Series 5
For Use With: Sound Bug Sound Only Decoder
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.10 (10pcs pkg)
HO 1958 Cu Ft 2 Bay Covered Hopper - Open sides
Polybor-Chlorate NAHX #30518
Features: Etched Metal Roofwalk, All Wire grab irons, Wire brake rigging, Sharp painting and lettering, six road numbers, metal wheelsets and equipped kadee scale size couplers
HO CA-8 Late Caboose w/Lights w/DCC & Sound - Union Pacific #25509
ETA: August 2021
Detailed Information
Union Pacific CA-8 Caboose FEATURES:
Caboose trucks with swing arms, friction or animated roller bearing bearing caps as prototype appropriate
Various safety slogans, in both early banner style with green lettering and late vinyl decal with special graphics
Sliding cupola side windows
Cupola-mounted marker lights when appropriate
25576 is offered in an early CA-8 Pool service configuration
HO B-50-15 Boxcar - As Built w/ Viking Roof - Southern Pacific (1931 to 1946 scheme) #37386
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
HO F89-F Bi-Level Auto Rack - CB&Q/BTTX #930176
Detailed Information
MODEL FEATURES:
Die-cast underframe
Authentic undulating safety railing
Accurate Whitehead and Kales Auto Rack
Early or late train lines and cut levers per prototype and era
Customer installed end bridge plates (included in box where applicable)
Detailed deck
Wire-formed brake plumbing
Separately applied hand brake per prototype
Separately applied wire grab irons where applicable
Prototypical ride height
70-Ton roller bearing trucks with animated rotating bearing caps installed
Trucks with animated rotating bearing caps
Minimum radius: 22inch - Recommended radius: 24+inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
HO 53Ft Railgon Gondola - Chicago & North Western #350089
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft Railgon Gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
A great addition to your HO freight car fleet, the models feature:
-Based on Railgon 310000 series cars
-Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
-Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
-100-ton roller-bearing trucks
-Correct 36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
3/32 inch OD Round Stainless Steel Rods - 22 Gauge x 12inch Long
Round Stainless Steel Rods - Not hollow (2 pcs)
Outside Diameter: 3/32 inch
HO EMD MP15AC Diesel - DCC Ready - GMTX GATX #333
GMTX FEATURES:
Ground lights
Road number specific features
Front and rear ditch lights
Cab-mounted A/C
GATX operates a fairly large lease fleet of locomotives to help service any railroads needs. We are offering full repaints from a range of different schemes used. Being leased as needed, these locomotives could be seen used all over the country, including Mexico and Canada.
ROAD NUMBER SPECIFIC FEATURES:
#319 Ex-SOO/MILW, All black repaint, cab-mounted 3-chime horn, frame-mounted bell, dual Xenon strobes (effect in DCC), small fuel tank, ratchet brake
#333 Ex-SOO/MILW, Light blue/black repaint, cab-mounted 3-chime horn, frame-mounted bell, dual Xenon strobes (effect in DCC), small fuel tank, ratchet brake
#335 Ex SP, Dark blue/black repaint, cab-mounted 3-chime horn, SP style number boards, blanked SP light package, frame-mounted bell, large fuel tank, brake wheel
MP15AC LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Lift rings
Windshield wipers
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Operating ditch lights (if equipped)
Operating ground lights
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and -printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
HO 20K Gallon Acid Tank Car - UCLX #30007
Era: 1991-2009, 2010-Present Day
MODEL FEATURES:
- Multiple road numbers
- Many separately-applied details
- Etched metal walkways
- Different top platforms as appropriate per prototype
- Different brake systems as appropriate per prototype
- Separate wire grabs and handrails
- Trucks with animated rotating bearing caps
- Minimum radius: 18 inches
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Body-mounted, McHenry scale double-shelf knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod
details
- Machined metal wheels with RP25 contours operate on all popular brands of track
HO Alco RS-3 Phase 1 - DCC & Sound - Conrail (ex Erie Lackawanna) w/ Large Louvers #5545
HO Ready To Run Locomotive. Many added details: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, fuel tank, can motor, flywheels, blackened wheels with RP25 flanges and knuckle couplers. DCC/Sound version features LokSound V5 decoder.
HO 36ft Galvanized Steel Grain Bin - Kit
(Narrow - 2.66 inch Corrugation)
Corrugated steel grain bins are a staple in any agricultural setting, placed on farms, elevators, industries, and beside railroad tracks. Used with a variety of farm commodities, these bins provide a safe, dry place to store that commodity until it goes to market.
With several styles to choose from, these grain bins will look right at home on your layout. They feature prototypical corrugations, realistic galvanized steel appearance, various side sheet heights, and a variety of diameters.
Narrow corrugation bins have corrugations spaced a scale 2.66 inches and the rings are 32 inches tall. Wide corrugation bins have corrugations spaced 4 inches apart with 44 inch tall rings.
All bins are easy to assemble - just stack the rings, glue them together, attach the roof and you are done! Every ring comes as one solid piece, so no time consuming and messy assembly of individual side sheet pieces to create each ring, saving you time and frustration!
What size bin will fit your space? Try our grain bin size calculator or printable template.
https://www.iascaled.com/store/GrainBinSizeCalculators
https://iascaled.com/docs/ho-bin/GBM-HO.pdf
Walthers SceneMaster 3150 HO Scale - Wrapped Lumber Load for 72 FT Centerbeam Flatcar - Apollo Forest Products
Put your railroad to work moving these Walthers SceneMaster Wrapped Lumber Loads from sawmills to local building suppliers. Made especially for the WalthersMainline 72Ft Centerbeam Flatcars ( 910-4800 series, each sold separately), each is prepainted and lettered in authentic schemes, and snaps easily onto the car to add realistic detail in a matter of minutes.
Budd Baggage-Dorm - New York Central #8973
Each Baggage-Dorm includes:
Realistic stainless steel finish
Track-powered interior lighting compatible with DC and DCC layouts
Full underbody detail including separate air, steam and electrical lines
Separate metal grab irons, stirrups and end gates
Accurate D22 brake equipment and piping
Super-detailed 41-NDO-11 trucks with end frames
Full, multi-color interior detail
3D CP beaver shields on CPR models - not just a printed picture!
Sprung diaphragms
Metal Macdonald-Cartier knuckle couplers
Code 83 Snap Track - 22 Inches Radius Curve
Brown Tie - 22.5 degrees per sections
HO GE C30-7 - DCC Ready - Norfolk Southern #8032
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
HO 60ft PS Flatcar - TTCX #92302
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO GP9RM - DCC & Sound - Canadian National (Stripes) #4105
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
Trainman HO Thrall 4750 Covered Hopper - Midwest Railcar (Ex-Rock) #462636
Features:
-Weighted body
-Equipped with AccuMate Knuckle Couplers
-Trucks equipped with free-rolling metal wheels
-Accurate painting and lettering
AccuMate couplers are made under license from AccuRail, Inc.
Coarse Turf - Light Green - Shaker (57.7 in3)
One 57.7 in3 shaker covers approximately 5,342 in2 or 37 ft2.
A complete assortment of various ground covers, foliage, colors and textures that coordinate perfectly. Mix, match and blend with complete assurance that your finished model will look natural and realistic. Use for any scale.
Add texture and highlights to trees, grasses, foliage, and other ground covers. Six realistic colors model fresh, scorched, and dying grasses, moss, weeds, and dirt roads. Attach with Scenic Cement(TM).
HO 85ft ACF 48-Seat Diner - Lighted - Union Pacific (Overland) #302
Union Pacific Heritage Fleet
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
Built as Lunch Counter Cafe Lounge in 1959 and originally numbered 5015, this car returned to special service as the Overland in 1988, named for UPs Overland Flyer and the later Overland Limited, which were both named for UPs Overland Route.
Model Features:
- Scaled from field measurements & diagrams of a GO F59PH
- End metal handrails with plastic stanchions
- Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
- All-metal etched grilles
- Full cab interior
- Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
- Operating headlights, rear light, and ditch lights
- GO units feature functioning tri-color class lights (white, green and red)
- American units feature functioning red marker lights
- Accurate sounds recorded from a GM 12-710G3A
- DCC/Sound units come equipped with an ESU LokSound decoder
Tangent Scale Models HO Greenville 86ft Boxcar CSX
CSX -Repaint 1991+ leads off this release, offering examples of repaints from B&Os first order of cars in 1969. Applying CSX paint to a Tangent replica is not a walk in the park ? It is all about the big AND little details. This car features the large CSX logo on the center of the sides and accurate Ease up! stickers on the corners. Apparently, the more the better, since CSX also applied tiny Ease up! stickers on each door. Yes, we have faithfully reproduced this extraordinarily small detail. Get out your magnifying glass if you want to read the CSX Quality Check oval sticker applied above the COTS by Grand Rapids employees. This Greenville car features Morton style crossover platforms, an Ajax hand brake housing, accurate End-of-Car Cushioning details with truck mounted brake hardware, and 70-Ton Barber S-2 Trucks with 33in wheels and accurate Timken roller bearing caps. Check out the CSX-specific modern features in this release, including the large tack board mounting location on the door and the single and double third arms on the top door tracks. We are now offering CSX in six different numbers!
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Two-Story House w/Garage
With this enamel product the modeler may easily represent streaking effects left by salt on vertical surfaces or horizontal areas of any ship. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look
HO 70-Ton 12-Panel Hopper - Southern #74747
Blt.6-66
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO EMD F7A/F7A Set - DCC Ready - Wabash #1169-A/#1189
Detailed Information
WAB FEATURES:
F7 Phase I
No dynamic brakes
Dual single-note air horns (A-units)
Passenger pilot
Cooling coils on roof
Wabash units 1158-1189 were delivered in 1951-52. In the 1960s, they were renumbered into the 600-726 series. Wabash 1189 has been preserved and is currently operational at a railroad museum in Illinois.
ROAD NUMBER SPECIFIC FEATURES:
#625
Nose MU connection
cut skirts
#631
Nose MU connection
cut skirts
#1169-A
Full Skirt
#1189
Full Skirt
F-UNIT SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Trainline and MU hoses
Windshield wipers
Lift rings
Wire grab irons
Sanding lines
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Directional constant lighting
Headlight brightness remains constant
Separately-applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes & retention tanks
Speed recorder unless noted
See-through cab windows and full cab interior
Etched metal fan grilles
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
HO SD75I - DCC Ready - Canadian National #5750
CN FEATURES:
SD75I body with isolated cab and turbo bulge
Many Canadian-specific detail parts, including:
Ribbed anticlimbers
Raised walkways
CN medium plow on front
CN rock pilot on rear
No HVAC louvers under cab
Pyle early headlights
Large grabirons on cab face
K-3 horn with all bells forward
Spare knuckles on rear pilot
HTCR-II trucks
Large & small Sinclair antennas
SD70 SERIES LOCOMOTIVE FEATURES:
Lift rings
Factory installed wire grab irons
Dual sanding lines
Windshield wipers
Anti-glare panel painted on the nose
Standard or Freight-style brake wheel
See-through radiator fans
DCC-ready features Quick Plug plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully assembled and ready-to-run
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
HO RTR 50Ft ACF Exterior Post Boxcar - Wisconsin & Southern #101570
Product Information
Serve shippers on your HO railroad with these WalthersMainline 50Ft ACF Exterior-Post Boxcars. Responding to a growing shortage of serviceable cars, ACF and other builders unveiled a new generation of bigger equipment in the 1970s with increased width and height to improve carrying capacity. Today, theyre still in service for Railbox and many other roads, where they can be found moving all types of cargo. Features of these models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes seen from coast-to-coast 1974 to the present
Handles all types of general freight loading
Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
41Ft 3inch Truck Centers
15Ft 2inch Tall
10Ft 8inch Wide
Fully assembled
Correct 33inch RP-25 metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO GE C36-7 - DC/DCC/Sound - Ferrocarriles Nacionales de Mexico #425
The Rapido Trains HO Scale C36-7 is based on General Electric's higher-horsepower six-axle Dash-7 offering, with a 16-cylinder 3,600 horsepower or 3,750 hp rating (compared to the C30-7's 3,000 hp.) Built between July 1979 and February 1989, over 599 total units were produced. Of those, 129 were domestic orders for Conrail, Missouri Pacific, Norfolk & Western, and Norfolk Southern. Another 40 were made for Ferrocarril del Pacifico and National de Mexico. Lastly, 422 were made for China with many significant export differences, and the final units produced were 8 for Comilog in Gabon. Despite smaller production numbers, the C36-7 was ordered at key moments that resulted in it representing the evolution of GE s Dash-7 line more than the popular C30-7s. When GE launched "1977 Series Locomotives" (Dash-7s) in, they cataloged a C30-7, C33-7, and C36-7. Railroads immediately ordered C30-7's for booming coal service. The C33-7 was never ordered. The C36-7 was ignored until 1979, when National de Mexico and Ferrocarril del Pacifico placed orders. These export C36-7s for Mexico were essentially identical externally to C30-7s, which were being built by the hundreds at the time. Ferrocarril del Pacifico's units were repainted into striking two-tone blue FNM paint and worked both freight and passenger service. Of the 40 C36-7s built for Mexico, only one is still in service in 2024 - Ferromex 9336. Incredibly, despite being the last operating C36-7 (among few remaining operating C30-7's) 9336 was repainted in Ferromex's classy "Diet Coke" scheme in 2023. The Rapido model features railroad and era-specific details, etched-metal grilles and details, roadname-appropriate lighting packages and Rapido semi-scale knuckle couplers on both ends. The smooth-running drive features a five-pole motor with dual flywheels, backed up with the MoPower capacitor system for uninterrupted operation. This standard DC model is DCC ready with a 21-pin interface for easy conversion. The GE C36-7 is part of the line of Rapido Trains HO Scale locomotives.
The Rapido HO Scale C36-7 Locomotive features:
Headlights and rear lights
Class lights, marker lights, or ditch lights, where applicable
Step lights
Lit numberboards
Full traction motor casing details
Metal brake chain on engineers side
Detailed underbody piping and conduit
Separate grab irons
Rapidos innovative dead straight metal side handrails with plastic stanchions
Detailed cab interior
Lighted control stand
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Sound-equipped units feature ESU Loksound V5 decoders
DCC & Sound - Canadian National CN #5602
ROADNAME AND ROAD NUMBER SPECIFIC FEATURES:
CN FEATURES:
Representing the only SD70Is built, Canadian National ordered 26 of these locomotives in 1996. They were all delivered painted in the single stripe scheme, featuring bold orange ends and a large -CN- adorning the side of the hood. Typical of many Canadian locomotives, they have several distinctive spotting features, such as early-style Pyle headlights mounted in the nose, ribbed front and rear anticlimbers, and the CN specified fuel tank with auxiliary waste oil retention tank. Now approaching their 20th birthday, these engines are still mainline power on the CN, and can often be found working in multiple with most other types of power, including GE Dash 8 & 9s, and EMD SD40, SD60 and SD70 series.
All road numbers
SD70I body
Freight type brakewheel
K-3 horn
Isolated cab with early Pyle nose mounted headlight
Angled cab door without window
Large & small Sinclair type antennas
Waste oil retention tank
Underbody plumbing
Tab mounted AEI tags
Spare knuckles on rear pilot
CN style medium plow
Ribbed front & rear anticlimbers
Salem air filters
Large emergency fuel cutoff button
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Operating ditch lights
MU receptacles and cables per prototype
Pilot face spare knuckles and brackets per prototype
Early or late anticlimbers
3 or 4 step walkways
AEI tags mounted on the frame or jacking pads per prototype
Safety tread on the walkways
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Anti-glare panel painted on the nose
Windshield wipers
Tinted or clear cab windows per prototype
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Standard or Freight-style brake wheel
See-through radiator fans
Lift rings
Factory installed wire grab irons
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Dual sanding lines
Rear pilot drop grab iron (MU hose retainer) pre prototype
DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Incandescent bulbs for realistic appearance
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Recommended radius: 22inch
Sound equipped models also feature:
Onboard DCC decoder with SoundTraxx Tsunami sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Prototype Information:
The SD50Fs were built by General Motors Diesel Division (GMDD) in London, Ontario, Canada in two batches ? in 1985 and 1987, respectively. It is the Canadian variant of the EMD SD50 six-axle diesel-electric freight locomotive. Nicknamed the ?Draper Taper? after CN?s Chief of Motive Power at the time, it has a full-width cowl body and cab, with a tapered section immediately behind the cab for improved rear visibility. A total of 60 units were built, all for the Canadian National Railway. They saw extensive mainline freight service on the CN network across Canada and in the United States. They were retired by CN in 2008. A limited number of locomotives still operate today with second-hand owners.
The SD50AFs were built General Motors Diesel Division (GMDD) in London, Ontario, Canada in 1985. They were effectively ?demonstrator? SD60F units with the then-new 710 prime mover installed in place of the 645 used on the SD50 series. A total of 4 units were built for the Canadian National Railway. Initially numbered CN 9900-9903, they were renumbered to CN 5500-5503 by 1989. All 4 units were retired by CN in 2017. Units 5500 and 5501 still operate today with the Dakota, Missouri Valley and Western Railroad in the United States.
General Model Features:
Canadian National Class GF-636a, CN 5400-5439. Built in 1985 by GMDD, London, Ontario, Canada.
Canadian National Class GF-636b, CN 5440-5459. Built in 1987 by GMDD, London, Ontario, Canada.
Canadian National Class GF-638a, CN 5500-5503. Built in 1985 by GMDD, London, Ontario, Canada.
Accurately designed from various prototype drawings, photos and other resources.
Models depict in-service locomotives from the mid-1990s and beyond.
Road name and road number-specific painting and lettering.
Multiple road numbers offered.
New and improved high-torque motor and drive mechanism guarantees smooth operation.**
Operating radiator fans. Improved radiator fan drive unit with quieter operation and selective fan control.**
All-wheel power pickup and all-axle drive.
Heavy die-cast, zinc alloy chassis.
AuroraJanney scale head replica couplers installed.
NMRA RP-25 wheel contour with Code 110 tread width.
Minimum radius: 18? (recommended 22?)
* Lighting functionality is limited on DC models operating on DC track power.
** Improvement over our previously-released HO scale SD60F.
DC Version Features:
DCC ready with 21MTC connector.
Dual sugar-cube speakers (functional after installation of a DCC sound decoder).
Operates on DC track.
HO F89F Trailer - TTX/Yellow #155700
MODEL FEATURES:
- Raised and lowered hitches included
- Die-cast underframe
- Wire formed brake plumbing
- Detailed deck
- 70-Ton roller bearing trucks with animated rotating bearing caps installed
- Separately applied brake ratchet, wire grab irons and ladders
- Machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Use for dedicated intermodal trains or mixed freight
- Decorated models fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Minimum radius: 22 inches
- Recommended radius: 24 inches
HO Dogbone - .660 inch (6/pkg)
HO 52Ft Mill Gondola - Norfolk Southern NS #200323
NEW FEATURES:
Refined end-sheet molded-on details
Improved rivet and bolt details
Corrected wire grab-iron placements
New top-chord details
New jack reinforcement pad details
New coupler cut lever mounting details
MODEL FEATURES:
Separately applied wire grab irons
Body-mounted McHenry operating scale knuckle couplers
33inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Weighted for optimum performance
Fully assembled and ready for your layout
Razor sharp painting and printing
Multi-packs feature unique road numbers
Minimum radius: 18inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
N Scale Roof Details - Kit
The Walthers Cornerstone N Scale Rooftop Details set includes parts to add realism and interest to the most visible part of your structures. This set of building details includes parts to build the details in the list below. All parts are molded in gray.
INCLUDES:
1 Large rooftop air conditioner
1 Medium rooftop air conditioner
1 Small rooftop air conditioner
2 Small swamp coolers
1 Motorized blower
4 Cyclone vents
4 Short monitor vents with round base
3 Tall monitor vents with flanged stack
2 Capped exhaust stacks
1 Motorized vents
3 Wind direction vent-intakes
3 Angled exhaust-Intake ducts
4 Short T-style exhaust stacks
5 tall smokejacks with caps
Tangent Scale Models HO Greenville 86ft Quad Door Boxcar - PC- Delivery X-60-R 2-1970
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Penn Central (PC) -Delivery X-60-R 2-1970- offers another big paint scheme for our customers. A big PC logo dominates the center of these cars, with a stacked Penn Central on the far left. Fans of the Penn Central expect the best from Tangent, and we aim to deliver just that. This 1970-built Greenville group features accurate End-of-Car Cushioning details, Gypsum crossover platforms and truck mounted brake hardware. This X-60-R order rides on 70-Ton Barber S-2 Birdsboro Roller Bearing Trucks, with 33in wheels and accurate rotating Brenco-6 roller bearing caps. These cars were part of the GM Lansing Stamping Plant car pool, with a return-when-empty stencil the GTW in Lansing, Michigan. These beauties are available with eight different road numbers!
HO F89-F Bi-Level Auto Rack - Southern/TTBX #930177
Detailed Information
MODEL FEATURES:
Die-cast underframe
Authentic undulating safety railing
Accurate Whitehead and Kales Auto Rack
Early or late train lines and cut levers per prototype and era
Customer installed end bridge plates (included in box where applicable)
Detailed deck
Wire-formed brake plumbing
Separately applied hand brake per prototype
Separately applied wire grab irons where applicable
Prototypical ride height
70-Ton roller bearing trucks with animated rotating bearing caps installed
Trucks with animated rotating bearing caps
Minimum radius: 22inch - Recommended radius: 24+inch
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale double-shelf knuckle couplers
Machined metal wheels with RP25 contours operate on all popular brands of track
N Scale Single Portal - Random Stone (2pk)
Tunnel portals, retaining walls, culverts, and roads reinforce natural terrain contours and add functionality, realism, and interest to your layout!
Create the look of a random stone portal over a single N scale track. Color with Earth Colors Liquid Pigment.
DIMENSIONS:
Outside: 3-1/8 W x 2-11/16 H inches (7.93 cm x 6.82 cm) each
Inside: 1-9/16 W x 1-15/16 H inches (3.96 cm x 4.92 cm) each
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .125In x 14In (5 pcs pkg)
60ft Pullman-Standard Bulkhead Flatcar - Ready to Run -- Canadian National
#621303
Protect loads in transit on your HO line aboard the WalthersMainline 60ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance.
Limited edition - one time run of these road numbers
Correct 8ft 6in tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33in turned metal wheelsets
Proto MAX metal knuckle couplers
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers