Digitrax HO Scale-DHDP DC Dummy Plugs (5 pack)
DHDP Dummy Plugs (5 pack)
ESU 51967 Adapter Board for LokSound 3.5 or LokSound v3.0 w/21 pin
ESU 51967 Adapter Board for LokSound 3.5 or LokSound v3.0 w/21 pin
Walthers Cornerstone 2321 - HO & N Turntable Advanced Control Module - For DCC Operation
HO & N Turntable Advanced Control Module - For DCC Operation
Digitrax SHABC HO scale Turnout Signaling Kit
Turnout Signaling Kit
Walthers 151 HO, N, Z, S, O - Walthers Layout Control System - Two Color LED Fascia Indicator (Yellow, Green)
Walthers Layout Control System - Two Color LED Fascia Indicator (Yellow, Green)
Rapido 320103 RailCrew HO Scale Switch Machine With Rotating Target (Pkg12)
Switch Machine With Rotating Target (Pkg12)
Soundtraxx 810159 - JST 21-PNEM Adapter
Soundtraxx 810159 - JST 21-PNEM Adapter
SoundTraxx 810149 - Ultra Flexible Hookup Wire, 10ft 30AWG, Red
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Red
Peco PL11 Side Mounted Turnout Motor
Side Mounted Turnout Motor
SoundTraxx 810144 - Ultra Flexible Hookup Wire, 10ft 30AWG, Violet
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Violet
Athearn Genesis G63868 - HO DCC Adapter Board (1)
DCC Adapter Board (1)
Digitrax RD2 Occupancy Detector Accessories - RD2 - Remote Sensing Diode - Use w/BDL168 (Sold Separately)
Digitrax RD2 Occupancy Detector Accessories - RD2 - Remote Sensing Diode - Use w/BDL168 (Sold Separately)
NCE 226 Auto-Switch- Automatic Program Track For Power Cab
NCE Auto-Switch- Automatic Program Track For Power Cab
Soundtraxx 886007 - HO & N Scale TSU-N18 Tsunami2 Sound Decoder for Electric Locomotives
HO & N Scale TSU-N18 Tsunami2 Sound Decoder for Electric Locomotives
Soundtraxx 810157 Wire Harness TSU/ECO Speaker
Soundtraxx Wire Harness TSU/ECO Speaker
SoundTraxx 810123 - NMRA-Compatible 8-Pin Connector (4pcs)
NMRA-Compatible 8-Pin Connector (4pcs)
ESU 51950 Cable Harness with 8 pin socket according to NEM 652, DCC Colour,
ESU Cable Harness with 8 pin socket according to NEM 652, DCC Colour Wire, Length = 11.81inch 30cm
ESU LLC. 50012 - ECoSBoost 7A, MM/DCC/SX/M4, set w/ power supply 120-240V, EURO + US, manual german/english
ECoSBoost 7A, MM/DCC/SX/M4, set w/ power supply 120-240V, EURO + US, manual german/english
ESU 53452 LokProgrammer - With Power Supply, Serial Cable, USB Adapter, Manual & CD
ESU 53452 LokProgrammer - With Power Supply, Serial Cable, USB Adapter, Manual & CD
NCE 205 - All Scale BD20 - Block Detector Module
All Scale BD20 - Block Detector Module
SoundTraxx 810142 - Ultra Flexible Hookup Wire, 10ft 30AWG, Black
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Black
SoundTraxx 810147 - Ultra Flexible Hookup Wire, 10ft 30AWG, Green w/ Yellow Stripe
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Green w/ Yellow Stripe
SoundTraxx 810146 - Ultra Flexible Hookup Wire, 10ft 30AWG, White
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, White
SoundTraxx 810143 - Ultra Flexible Hookup Wire, 10ft 30AWG, Orange
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Orange
Circuitron 5303 - Snapper Switch Machine Power Supply
Snapper Switch Machine Power Supply
NCE 229 Six pack of 1 Amp replacement lamps for CP6
NCE 229 Six pack of 1 Amp replacement lamps for CP6
ESU 54672 HO/ N Scale Power Pack Energy Storage For Lok-Sound
Power Pack Energy Storage For Lok-Sound
SoundTraxx 810152 - Ultra Flexible Hookup Wire, 10ft 30AWG, Green
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Green
Soundtraxx 810158 2-Pin Wire Harness, Current Keeper
Soundtraxx 2-Pin Wire Harness, Current Keeper
SoundTraxx 810145 - Ultra Flexible Hookup Wire, 10ft 30AWG, Gray
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Gray
SoundTraxx 810150 - Ultra Flexible Hookup Wire, 10ft 30AWG, Brown
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Brown
DCC Specialties RRamp Meter V1
DCC Specialties RRamp Meter V1
SoundTraxx 810148 - Ultra Flexible Hookup Wire, 10ft 30AWG, Blue
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Blue
SoundTraxx 810151 - Ultra Flexible Hookup Wire, 10ft 30AWG, Yellow
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Yellow
Digitrax - PX108-6F HO Power Xtender
PX108-6F HO Power Xtender
Walthers 155 HO, N, Z, S, O - Walthers Layout Control System - Single Color LED Fascia Indicator (Yellow)
Walthers Layout Control System - Single Color LED Fascia Indicator (Yellow)
Digitrax DCS52 - Zephyr Express: All-in-one Command Station/Booster/Throttle - Starter Set
Zephyr Express: All-in-one Command Station/Booster/Throttle - Starter Set
Walthers 161 HO, N, Z, S, O - Walthers Layout Control System - Stall Motor Driver
Walthers Layout Control System - Stall Motor Driver
Walthers 154 HO, N, Z, S, O - Walthers Layout Control System - Single Color LED Fascia Indicator (Green)
Walthers Layout Control System - Single Color LED Fascia Indicator (Green)
DCC Specialties RRamp Meter V2
DCC Specialties RRamp Meter V2
ESU 50114 Mobile Control II - Throttle, Lanyard, USB-Cable
Mobile Control II - Throttle, Lanyard, USB-Cable
Walthers Layout Control 101 - Universal Switch Machine - Vertical
Universal Switch Machine - Vertical
Digitrax N Scale-DNDP Dummy Plugs for Digitrax N Scale Harness (5 pack)
DNDP Dummy Plugs for Digitrax N Scale Harness (5 pack)
SoundTraxx 810140 - CurrentKeeper
810140 CurrentKeeper
Walthers 156 HO, N, Z, S, O - Walthers Layout Control System - Single Color LED Fascia Indicator (Red)
Walthers Layout Control System - Single Color LED Fascia Indicator (Red)
SoundTraxx 810156 - Wire Harness - ECO-100/TSU-1100 8-Pin Power
SoundTraxx - Wire Harness - ECO-100/TSU-1100 8-Pin Power
ESU 50210 ECoS 2.1 DCC Command Station - Full Color Display
ESU ECoS 2.1 DCC Command Station - Full Color Display
NCE 402 - Power Cab Firmware Upgrade Chip 1.65B
Power Cab Firmware Upgrade Chip 1.65B
NCE 211 Plug-Pack - 10 pcs
NMRA 8-Pin Plugs pkg(10)
DHDP Dummy Plugs (5 pack)
Product Information
Accessory wire harnesses match those included with Digitrax DH series decoders. Extra harnesses allow you to share DH Series decoders among several locos in your fleet. Dummy plugs allow for non-DCC operation of harness equipped locomotives.
ESU 51967 Adapter Board for LokSound 3.5 or LokSound v3.0 w/21 pin
The 21 MTC adapter board is suitable for digitising a loco without interface and for the case you do not intend to wire the decoder freely.
The adapter board offers a possibility for installing a decoder with 21MTC connector. This decoder is simply plugged onto the board. At the other end 21 annular rings make a clean wiring of your loco possible. A neat conversion can be made via this adapter board and enables you to use all additional functions of the 21MTC connector (e.g. loud speaker outputs).
HO & N Turntable Advanced Control Module - For DCC Operation
Product Information:
The Walthers Cornerstone Turntable Advanced Control Module makes it possible to operate your Motorized Turntable using DCC, serial UART, keypad or switch contacts. For DCC applications this circuit will function as a stationary decoder with no CV or programming required. The Turntable Advanced Control Module includes the circuit, Connection cable and complete instructions.
Adds DCC, serial UART, keypad and switch contact input modes including:
- DCC control using stationary decoder protocols
- Numeric Keypad
- Button per track
- Rotary selector switch
- Control box emulation
- Serial Rx/Tx UART port
- Digital outputs for remote dual digit display and controlling track power relays to selectively power service tracks automatically
Measures: 2-3/4in (70mm) x 4-3/16in (107mm)
Please Note: This unit is designed for use only with the following Motorized Turntables, each sold separately:
- HO Scale 90ft 933-2860
- HO Scale 110ft 933-2851
- HO Scale 130ft 933-2859
- N Scale 130ft 933-2618
Turnout Signaling Kit
HO scale Turnout Signaling Kit including:
1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws.
Makes all of your signals plug n play with small 10 pin connectors.
Can be used as a basic HO scale signal.
Mounting board and hardware included.
Current setting resistors are built in to the board.
Easy plant setup with A, B, and C mast configurations.
Pads are provided to make it easy to attach any signal to the mast base.
This product is intended for use with the SE8C
The Digitrax Plug N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE8C signal driver cable.
This product is intended for use with the SE8C and other Digitrax signaling decoders.
Walthers Layout Control System - Two Color LED Fascia Indicator (Yellow, Green)
Works for HO, N, Z, S, and O Scales
This 21st century approach to turnout control uses servo-based components, and features color-coded plug-and-play wiring to eliminate cutting and soldering. The heart of the system is the fully assembled Switch Machine that has a low current draw and comes with great features including an integrated DCC accessory decoder, as well as user-selectable options for quick and easy customizing.
Switch Machine With Rotating Target (Pkg12)
The RailCrew Switch Machine with Rotating Target is the only hidden switch machine guaranteed to turn heads after you install it on your layout. As well as the machine itself, it comes with three different WORKING injection plastic moulded switch stands and ten different photo-etched metal targets based on most major North American railroad designs. The target (and optional, non-working lantern – two styles) actually rotates just like the real thing. Yes, you read that correctly. The unit also comes complete with SPDT auxiliary contacts to power frogs and signals.
This innovative new product features:
Compact 1 1/8 Inch(28.5mm) diameter x 1 Inch (25mm) height
Easy to install on existing layouts
Museum-quality switch stands with rotating targets
Racor 17B (tall), 31B (tall) and 20C (low) switch stands ALL included!
Momentary 12V DC power – power numerous machines off of one power supply.
Strong enough to throw and hold the points but it wont break them
SPDT auxiliary contacts to power frogs and signals
Low-profile, compact design – its really tiny
Work with all layout types, including multi-deck and portable layouts
Available in singles, 6-packs or 12-packs
Switch stands and targets also available separately
Soundtraxx 810159 - JST 21-PNEM Adapter
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Red
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
Side Mounted Turnout Motor
Recommended: 16 Volts AC at 2 Amps
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Violet
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
DCC Adapter Board (1)
Digitrax RD2 Occupancy Detector Accessories - RD2 - Remote Sensing Diode - Use w/BDL168 (Sold Separately)
RD2 Remote Sensing Diodes for BDL16 series occupancy detectors
Remote sensing of 2 detection sections. Eliminates the need for long runs of heavy gauge wire between the BDL168, BDL16 & BDL162 and remotely located track sections.
NCE Auto-Switch- Automatic Program Track For Power Cab
HO & N Scale TSU-N18 Tsunami2 Sound Decoder for Electric Locomotives
Dimensions: 25 x 10.5 x 4.1mm
Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output)
Function Outputs: 6
Audio Amplifier: 1 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
BIG sound in a small package! The small size of our new Tsunami2 TSU-N18 decoder makes it ideal for both N and small HO models that come equipped with a NEXT18 socket. Installations can not get any easier. Simply plug this decoder in and enjoy all of the Tsunami2 features you know and love!
You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive dynamic digital exhaust, functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. Soundtraxx also offers a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12 in each diesel version), whistles (90), airhorns (40+), couplers, dynamos and more!
The TSU-N18 can be wired to a CurrentKeeper to maintain performance over dirty track and switches.
Soundtraxx Wire Harness TSU/ECO Speaker
NMRA-Compatible 8-Pin Connector (4pcs)
This set of four 8-pin connectors is designed to facilitate wiring in locomotives equipped with a DCC-ready socket.
ESU Cable Harness with 8 pin socket according to NEM 652, DCC Colour Wire, Length = 11.81inch 30cm
ECoSBoost 7A, MM/DCC/SX/M4, set w/ power supply 120-240V, EURO + US, manual german/English
Indispensable components of any large model railroad are amplifiers (here called Booster): If the power consumption of all of your moving trains including their functions, car illumination, and function models is larger than the current the central station is able to put out, you have to split up your layout into several blocks, the power for which is supplied by their own booster. The ECoSBoost(er) is designed for precisely that task: It is matched perfectly for the use with our ESU ECoS or the Märklin® central station.
MODE OF OPERATIONS:
The ECoSBoost is connected directly to the ECoSlink jack, from where it gets its control signals. Basically it is capable of amplifying and delivering to the track these data formats: DCC, Motorola, Selectrix® and mfx®. Which data format will be put out in a given case, depends of course entirely upon the command station thats being used, and its capabilities: Therefore the booster, connected to an ESU ECoS, will handle DCC, and Selectrix®, while, if attached to a Marklin® central station, it will amplify and deliver Motorola®-, respectively mfx® data signals. Thanks to Plug&Play, all ECoSBoost(ers) are included automatically into a list of extern ECoSlink components, and can be controlled and configured centrally on the ECoS display.
The correct firmware status is essential to make the ECoSBoost work properly with these command stations: If the interior software is too old, the booster will possibly not be recognized. Please check the system requirements.
FUNCTIONS:
ECoSBoost amplifies data signals generated by the digital central station, and delivers them to the designated track outlet. ECoSBoost power comes from an included power supply, featuring a stabilized DC output. Each ECoSBoost is controlled and configured comfortably directly by the ECoS: For each booster you can individually determine its max permissible output current. Whats more, the display can be dialled up to show you the present power consumption of each booster, so you know how much reserves you still got. Extremely sensible is the option to tell each booster individually, weather or not to shut down its section in case of a layout short circuit. For example, if you have your switch (turnout) decoders hooked up to a separate ECoSBoost, you can still control your switches reliably in case of a track short.
FEEDBACK:
An ECoSBoost can do more than amplify and deliver track current: Each one has incorporated, as a standard feature, a feed back function (Global Detector) for the NMRA Bidirectional Communication. With its help, appropriately equipped locos can send back information to the ECoS, as soon as the relevant DCC – norm is adopted. This is immensely helpful in finding the locos position on the layout, or reading out engine data. ECoSBoost reads the data and sends them via the ECoSlink high speed bus to ECoS for further processing.
PROTECTION:
Each ECoSBoost of course meets the relevant requirements regarding safety and operation on a layout: The track outlet is protected against overload as well as short circuits. Of course ECoSBoost can differentiate between a genuine short, and a momentary current drain when passing over switches or gaps. We place value on the indestructibility of the device, just like we do with our mobile decoders.
FUTURE BUILT-IN:
The operational software of each, in an ECoSBoost integrated micro controller can be updated, of course, if need be, and augmented by additional functions: The required upgrade is performed automatically bythe ECoS central station, if necessary. No action on your part is required! In this way your ECoSBoost is literally always up to date!
ESU 53452 LokProgrammer - With Power Supply, Serial Cable, USB Adapter, Manual & CD
Enjoy your LokSound equipped engines even more by adding or changing sounds and fine-tuning performance using this unit with your home computer. Easy to use with no prior knowledge of programming needed, the unit can be used with any PC with an audio card and a Windows operating system. Just connect the programmer to your PC using the serial port or the USB adapter (included). Start the software then place a loco with a LokSound decoder on your programming track. The software automatically detects which type of decoder is installed and provides specific information; easy to follow on-screen graphics let you change loco address, speed steps, acceleration and deceleration, load control, speed curve and analog functions, assign function buttons for lighting effects and brightness, and all special settings. Plus, you can change or completely replace the current sounds with additional selections included on the software. You can also use your own recordings or choose from a wide range of downloads available on the Loksound Web-site. Unit is complete with power supply, serial cable, USB adapter, manual and CD.
All Scale BD20 - Block Detector Module
The BD-20 block detector module is normally used to indicate the presence of a locomotive, caboose or other rolling stock in a track section by sensing electrical current drawn by that rolling stock. Locomotives will naturally trigger the detector because they draw current through their DCC decoder. Unpowered rolling stock will not trigger the detector unless equipped with some means of drawing current from the rails such as lights or resistor wheel sets.
The BD20 needs to be as close to the section being detected as possible to avoid false detection triggered by long runs of cable. For the BD20 to work correctly ALL feeders for the section being detected must go thru the BD20. The best practice is to have one BD20 per feeder, and only one feeder per section of track. That section should be isolated from all other sections by using gaps or insulating rail joiners.
The BD20 acts like a normally open switch that gets triggered by sensing current going thru the coil. In a typical application you connect the outputs of the BD20 to something (Logic + 5 to 12vdc) that will react to a ground short. we use it to trigger the inputs of the AIU. Most signal systems work the same way.
The BD20 is a detection device and cannot drive a signal directly unless you want to use the external LED connection in some fashion. An AIU is an input device that detects a 5v line being shorted to ground, such as the output of a BD20. The AIU then puts this information on the NCE Cab Bus. Neither device (BD20 or AIU) are directly related to signaling. They do detection and notification.
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Black
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Green w/ Yellow Stripe
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, White
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Orange
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
Snapper Switch Machine Power Supply
Solid state, provides positive power to dual-coil switch machines. Protects from burnout due to stuck pushbuttons, short circuits, etc. Operates off accessory terminals of power pack or transformer up to 25V. 24V input can activate 5 to 10 coils simultaneously if connected to same control. Instant recycle time. Includes a section of Printed Circuit Mounting Track (PCMT).
NCE 229 Six pack of 1 Amp replacement lamps for CP6
Power Pack Energy Storage For Lok-Sound
The new ESU PowerPack Maxi has been developed as the powerful complement to the LokSound L V4.0 decoder. It can, of course, provided there is sufficient space, also be connected to all LokPilot V4.0, LokSound V4.0 or LokSound V4.0 M4 decoders. It provides uninterrupted power to your locomotive when traversing dirty track and long turnout ladders. All sound, lighting and motor functions are buffered with the aid of two energy storage capacitors enabling your models – subject to the total energy consumption - to continue running for up to three seconds.
The PowerPack Maxi incorporates an integral charging circuit controlled by the decoder. Therefore it may be connected even during programming. The charging current is limited in order to avoid an undue load on the booster, in case there are several models in the same booster sector.
The buffer time can be reduced by means of a CV. This may be useful to assure the correct stopping position ahead of signals showing the Stop aspect (red signal).
The space requirements of the PowerPack Maxi of about 27.5 mm x 15.7 mm x 13 mm must be taken into account when installing this unit.
A three-pole wire harness connects the PowerPack Maxi to the decoder. The wires are already soldered to the PowerPack Maxi but must be soldered to the appropriate solder pads of the decoder.
Please note that due to technical reasons the PowerPack cannot operate in analogue mode: Buffering is therefore not possible in analogue mode.
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Green
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
Soundtraxx 2-Pin Wire Harness, Current Keeper
Easily connect a CurrentKeeper or extra capacitor to any SoundTraxx decoder equipped with a 2-pin -Quick Plug- to improve performance over dirty track and switches.
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Gray
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Brown
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
DCC Specialties RRamp Meter V1
- The only inexpensive device that accurately measures DCC Volts/Amps.
- Also measures AC and DC Volts/Amps.
- Costs less than DVMs that cannot measure DCC. Ver II rated at 10 Amps
- Measures true RMS Volts/Amps, +/- 2%.
- Suitable for all scales.
- No batteries required.
- Designed for Left/Right-hand use.
- PCB length 5.63 inches
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Blue
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
SoundTraxx - Ultra Flexible Hookup Wire, 10ft 30AWG, Yellow
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze.
PX108-6F HO Power Xtender
Walthers Layout Control System - Single Color LED Fascia Indicator (Yellow)
Works for HO, N, Z, S, and O Scales
This 21st century approach to turnout control uses servo-based components, and features color-coded plug-and-play wiring to eliminate cutting and soldering. The heart of the system is the fully assembled Switch Machine that has a low current draw and comes with great features including an integrated DCC accessory decoder, as well as user-selectable options for quick and easy customizing.
Zephyr Express: All-in-one Command Station/Booster/Throttle - Starter Set
Zephyr Express gives you simple to use Digitrax Complete Train Control for a great price. It offers simplified advanced train operation for any size layout and is fully expandable. You will not have to start over when you want to do more with your railroad!
Zephyr Express Set Includes:
- DCS52 All-In-One Throttle/Command Station/Booster to run your layout
- PS314 Power supply to provide power to run your DCS52
- One LT1 LocoNet Cable & Decoder Test Kit
- Zephyr Express Quickstart Guide
- Zephyr Express Manual
- Digitrax Decoder Manual
Zephyr Express Offers:
- Cost effective entry level LocoNet Compatible system
- Color 2.4 inch LCD Screen.
- Large Backlit Keypad.
- Speed control knob and direction switch with brake.
- Integrated USB Computer Interface
- Easy 2 and 4 digit addressing.
- Smooth speed control.
Run multiple trains at once without blocking!
- Run up to 20 addresses at the same time on your system.
- Run up to 20 throttles at the same time on your system.
Jump Ports for using DC power packs as additional throttles:
- Use one or two smooth DC power packs as throttles to control DCC equipped locomotives.
- Simple, cost effective way to add more throttles to your Zephyr Express set.
- Makes it easy to share the fun of DCC with layout visitors and young operators.
- Functions on locos controlled by Jump throttles remain active.
Over 9000 Locomotive Addresses:
- Use Address 00 to run one or more locos without DCC decoders
- Two Digit Addressing is easy to use. (Address 01-127)
- Four Digit Addressing-use the number painted on your engines as its address.
3.0 Amps of Power to run multiple trains:
- Booster outputs 13V DC for safe operation in N and HO scales.
Function Control:
- Control lights and sound with 29 functions (F0-F28)
- Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
- Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder).
Stationary Decoders, Turnout Control & Turnout Position Reporting:
- Access to stationary decoder control for turnouts and other devices.
- Control 2000+ stationary decoder addresses.
Consisting:
- Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos.
- Advanced consisting, allows only advanced consist capable mobile decoders.
- Basic consisting, program decoders to run on same address.
Decoder Programming:
- Built in read/write programmer that can read and write all CVs.
- Supports Direct programming (Digitrax preferred method). Also supports paged & register mode programming.
- Operations mode programming can be used to program decoders on the layout.
Expandability with Digitrax LocoNet:
- Use Zephyr Express as a starting point for your Digitrax LocoNet System, then add components.
- Use Zephyr Express as an expansion set with Digitrax equipment you already have installed.
- Add Radio or IR via LocoNet. Just plug-in a UR90, or UR92 receiver and add IR and/or Radio throttles.
Walthers Layout Control System - Stall Motor Driver
Works for HO, N, Z, S, and O Scales
Using the Walthers Layout Control System Stall Motor Switch Machine Controller you can:
Easily upgrade your existing stall motor switch machines to use Walthers Layout Control System plug and play fascia controls and indicators
Works with most popular brands of stall motor switch machines
Easily mix and match existing machines with Walthers Layout Control System Switch Machines using common controls and wiring
Use with Tortoise(R), Cobalt, Hankscraft(R), Switchmaster(TM), MP1, MP5, Micro-Mark(R) Switch Tender(R), and other types of stall motors
Integrated DCC accessory decoder
Outputs for both single or bi-color LEDs
Includes 6 In (15.2cm) color-coded 3-wire motor connection cable with plug (some soldering required)
4 Ft (1.2m) Connecting power cable included - easily expanded with Extension Cable (942-113, sold separately)
Adjustable voltage output
Complete instructions with self-adhesive mounting bracket - use with Walthers Layout Control System Turnout Drill Set (942-140, sold separately)
Walthers Layout Control System - Single Color LED Fascia Indicator (Green)
Works for HO, N, Z, S, and O Scales
This 21st century approach to turnout control uses servo-based components, and features color-coded plug-and-play wiring to eliminate cutting and soldering. The heart of the system is the fully assembled Switch Machine that has a low current draw and comes with great features including an integrated DCC accessory decoder, as well as user-selectable options for quick and easy customizing.
DCC Specialties RRamp Meter V2
The only inexpensive device that accurately measures DCC Volts/Amps.
Also measures AC and DC Volts/Amps.
Costs less than DVMs that cannot measure DCC. Ver II rated at 10 Amps
Measures true RMS Volts/Amps, +/- 2percent.
Suitable for all scales.
No batteries required.
Designed for Left/Right-hand use.
PCB length 5.63 inches; Enclosure length 4 inches, width 2 inches, height 1.25 inches
- Version II RRamp Meter with Enclosure and Clip Leads
Mobile Control II - Throttle, Lanyard, USB-Cable
Product Features and Details
Mobile Control II wireless hand controllers set for ECoS, DE / EN. With wrist strap, USB charging cable
Since smartphones have the classic mobile phone virtually completely displaced with touch controls to model railroaders and train manufacturers Model ask how to use these powerful devices for controlling a model railroad layout. As a result of these issues emerged lately many apps that you can download on his mobile phone and control for model railway use. This approach certainly has the disadvantage that a smartphone was not primarily designed for model railroad operation and is always drawn due to lack of input elements of the views of model railroaders on display. By the time goes on strike due to intensive Bahnbetriebs the phone battery and one is no longer accessible, the limits are quickly apparent. We at ESU us therefore raised the question of how to combine the advantages of smart phone technology with the needs of model railroaders. With great pleasure we introduce the result of our considerations you today. The Mobile Control II you can control locos, stationary decoders and routes via state radio!
Open platform
The all-new Mobile Control II is based on Android. For this open, distributed worldwide operating system a powerful base was created: The clocked with 1.3 GHz ARM A8 Cortex microprocessor can access 1 GB of RAM and controls a high-resolution TFT color display with 3.2 inch size. For storing apps and data are available 4 GB of flash memory available. A capacitive touch screen ensures the contactless entry of all data. To communicate with the outside world in addition to a USB port provides a wireless radio interface. Thanks to the standardized radio interface can always be assured your layout trouble-free operation. With the help of wireless repeaters can be easily extended if necessary radio range. The permanently installed, high-performance lithium polymer battery lets loose even on the longest days of operation. Connect to load your Mobile Control II easy with the USB charger of your mobile phone or any other USB port. Because of the open platform, you can always expand with the help of additional apps from the Google Play Store the functions.
Combines ergonomics and function
If you II hold the Mobile Control for the first time in his hands, you will immediately notice its outstanding ergonomics: all controls can be reached with one hand immediately, the most important functions even -blind-: Her eyes remain focused on your plant and your moves. Made possible by the central, motorized knobs with end stop. With its help, you can sensitively control the speed of the locomotive and change the driving direction. For switching functions directly touching the icons displayed on the screen. The screen is also used for easy change of functions - exactly like you know it from your phone already. Two buttons on the left and right side of the device eventually serve for switching the driving direction or to trigger the most important functions.
Interaction
The Mobile Control II is perfect for working with the ECoS command stations tuned: The ECoS synchronizes all data with the wireless handheld controller, so you need to enter any data locally. For magnetic and routes also the names, addresses and correct symbols are displayed naturally.
Control locomotives
The Mobile Control II can control all created in the ECoS locomotives and understands course 14, 28 or 128 speed steps. All significant Lokeigenschaften as the name, a locomotive symbol, Function Keys and Function Keys symbols are taken over by the ECoS and displayed correctly. In this case up to 28 function keys can be connected per locomotive, which can of course be individually configured as static as well as moment features.
Switch accessories
All arranged on the interlocking of ECoS accessory and driveways can be switched. Of course, the distinction remains in two- three and four magnetic accessories received and it is also the correct symbol appears on the display.
More fun at play
The high-resolution (480 x 800 pixels, 280 dpi), backlit TFT display of the Mobile Control II you always informed about the most important operating parameters. In addition you can see if a loco was assigned by another player or if an emergency stop on the plant.
Clever connection
The Mobile Control II uses the wireless standard for communication with the ECoS. You must therefore connect the panel to a WLAN. If you already own a wireless router (eg AVM FritzBox, you can connect to this ECoS easily. The ECoS and the Mobile Control II will be found automatically. Do you want your model railway not connect to your home network and you want to remain flexible for exhibitions, this is also not a problem: Upon request we provide for the Mobile Control II a mini access point with which easily using the ECoS in a few steps set up is. If your model railroad grows, you can connect up to 16 Mobile Control II with your ECoS. In this way, for example, every club member is able to control its intended locomotive
Universal Switch Machine - Vertical
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC or DC power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator-control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
The Walthers Layout Control System Vertical Switch Machine features:
- Fully assembled, servo-based unit with approximately one second throw speed
- Integrated DCC accessory decoder
- Two built-in 5A switches to power turnout frogs, signals, track blocks and more
- Self-locking mechanism for reliable positioning - servo power turns off when motion is complete
- Adjustable throw and tension from 1/32 inch to 1/2 inch for turnouts in any scale from Z to O
- Factory-assembled with output rod in centered position for fast and easy under-benchwork mounting
- Wire in minutes with included cables
- Outputs for both single or bi-color LEDs
- Connecting cable included - easily expanded with Connecting Cable (#942-112, sold separately)
DNDP Dummy Plugs for Digitrax N Scale Harness (5 pack)
Lets you run locos as DC or DCC
For DC only operation use the dummy plug with either DNWH or DNWHPS
For DCC operation remove the DNDP and replace with a decoder
5-Pack
CurrentKeeper
DIMENSIONS:
40 x 6 x 11mm
The SoundTraxx CurrentKeeper is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup or dead frogs to ensure reliable operation of any locomotive in your fleet.
Walthers Layout Control System - Single Color LED Fascia Indicator (Red)
Works for HO, N, Z, S, and O Scales
This 21st century approach to turnout control uses servo-based components, and features color-coded plug-and-play wiring to eliminate cutting and soldering. The heart of the system is the fully assembled Switch Machine that has a low current draw and comes with great features including an integrated DCC accessory decoder, as well as user-selectable options for quick and easy customizing.
SoundTraxx - Wire Harness - ECO-100/TSU-1100 8-Pin Power
Replacement 8-wire power harness for all TSU-1100 or ECO-100 Digital Sound Decoders.
ESU 50210 ECoS 2.1 DCC Command Station,
Full Color Display, MM/DCC/SX/M4, Set including power supply input 90-240V, output 6A / 15V-21V, 150W power supply, German /English manual
The ECoS 50210 is already the second generation of our successful ECoS command station. With the latest ECoS command station, ESU continues to offer state-of-the-art digital technology combined with contemporary functional range and easy handling all this for a fair price-performance ratio.
The ECoS has - like most of the recent central stations - a large coloured display with high resolution. In combination with its ground-breaking and easily operated user interface and excellent contrast values of the coloured screen, ECoS reaches unprecedented ergonomics: unlike all the other central stations, the ECoS can be also operated without a stylus - all symbols and writings are hugely marked and clearly structured.
ECoS has 9 function keys per integrated cab. The light-, and function keys 1 to 8 show the current state of the function via LEDs.
Discover the fascinating possibilities of the ECoS command station on the following pages. But take heed: ECoS performance is so good, that even we had to re-read a few passages to believe it!
Power Cab Firmware Upgrade Chip 1.65B
NMRA 8-Pin Plugs pkg(10)